..
include
aks-cdu.dts
ARM: at91: dt: switch to standard GPIO flag defines.
2013-05-17 11:27:49 +02:00
am33xx-clocks.dtsi
ARM: dts: am33xx-clock: Fix ehrpwm tbclk data
2014-05-23 11:50:36 +03:00
am33xx.dtsi
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
2014-06-12 14:27:40 -07:00
am35xx-clocks.dtsi
ARM: dts: omap3 clock data
2014-01-17 12:36:41 -08:00
am43x-epos-evm.dts
ARM: dts: am43x-epos-evm: add LCD data
2014-06-03 10:22:20 +03:00
am43xx-clocks.dtsi
Merge branch 'for-v3.16/clk-dt' of https://github.com/t-kristo/linux-pm into omap-for-v3.16/dt-v2
2014-05-28 10:14:48 -07:00
am335x-base0033.dts
ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
2013-11-26 15:03:38 -08:00
am335x-bone-common.dtsi
ARM: dts: AM33XX: fix ethernet and mdio default state
2014-05-14 14:45:15 -07:00
am335x-bone.dts
ARM: dts: AM33XX: Add AES data and documentation
2013-10-11 21:06:40 +02:00
am335x-boneblack.dts
ARM: dts: am335x-boneblack: remove use of ti,vcc-aux-disable-is-sleep
2014-05-05 17:37:13 -07:00
am335x-evm.dts
ARM: dts: AM33XX: fix ethernet and mdio default state
2014-05-14 14:45:15 -07:00
am335x-evmsk.dts
ARM: dts: AM33XX: fix ethernet and mdio default state
2014-05-14 14:45:15 -07:00
am335x-igep0033.dtsi
ARM: dts: AM33XX: fix ethernet and mdio default state
2014-05-14 14:45:15 -07:00
am335x-nano.dts
ARM: dts: AM33XX: fix ethernet and mdio default state
2014-05-14 14:45:15 -07:00
am437x-gp-evm.dts
fbdev changes for 3.16 (omap devicetree)
2014-06-09 18:32:13 -07:00
am3517_mt_ventoux.dts
ARM: dts: AM3XXX: Use #include for all device trees
2013-06-18 18:53:41 -05:00
am3517-craneboard.dts
ARM: dts: Add basic devices for AM3517-craneboard
2014-03-02 18:34:14 +01:00
am3517-evm.dts
ARM: dts: Add basic devices on am3517-evm
2013-12-08 14:15:46 -08:00
am3517.dtsi
ARM: dts: AM3517: Disable absent IPs inherited from OMAP3
2014-04-25 09:55:00 -07:00
am4372.dtsi
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
2014-06-12 14:27:40 -07:00
animeo_ip.dts
ARM: at91: Animeo IP: fix mtd partition table
2013-12-09 11:10:13 +01:00
armada-38x.dtsi
Merge tag 'mvebu-dt-3.16-2' of git://git.infradead.org/linux-mvebu into next/dt
2014-05-23 23:55:29 +02:00
armada-370-db.dts
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
armada-370-mirabox.dts
ARM: mvebu: remove clock-frequency of serial port Device Tree nodes
2014-04-26 00:34:44 +00:00
armada-370-netgear-rn102.dts
ARM: mvebu: remove clock-frequency of serial port Device Tree nodes
2014-04-26 00:34:44 +00:00
armada-370-netgear-rn104.dts
ARM: mvebu: remove clock-frequency of serial port Device Tree nodes
2014-04-26 00:34:44 +00:00
armada-370-rd.dts
ARM: mvebu: remove clock-frequency of serial port Device Tree nodes
2014-04-26 00:34:44 +00:00
armada-370-xp.dtsi
mvebu DT changes for v3.16
2014-05-19 21:55:03 -07:00
armada-370.dtsi
ARM: mvebu: switch to the new PMSU binding in Armada 370/XP Device Tree
2014-04-24 05:28:41 +00:00
armada-375-db.dts
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
armada-375.dtsi
ARM: mvebu: add Device Tree description for the EHCI controllers on Armada 375
2014-05-16 05:53:20 +00:00
armada-380.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
armada-385-db.dts
ARM: mvebu: add Device Tree description of the EHCI controller on Armada 38x
2014-05-16 05:49:38 +00:00
armada-385-rd.dts
ARM: mvebu: add Device Tree description of xHCI controllers on Armada 38x
2014-05-16 05:49:26 +00:00
armada-385.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
armada-xp-axpwifiap.dts
ARM: mvebu: remove clock-frequency of serial port Device Tree nodes
2014-04-26 00:34:44 +00:00
armada-xp-db.dts
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
armada-xp-gp.dts
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
armada-xp-matrix.dts
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
2014-06-12 14:27:40 -07:00
armada-xp-mv78230.dtsi
ARM: mvebu: add enable-method property for CPUs
2014-04-24 05:50:14 +00:00
armada-xp-mv78260.dtsi
ARM: mvebu: add enable-method property for CPUs
2014-04-24 05:50:14 +00:00
armada-xp-mv78460.dtsi
ARM: mvebu: add enable-method property for CPUs
2014-04-24 05:50:14 +00:00
armada-xp-netgear-rn2120.dts
ARM: mvebu: don't use clocks property in UART node for Netgear RN2120
2014-04-26 00:34:57 +00:00
armada-xp-openblocks-ax3-4.dts
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
armada-xp.dtsi
ARM: mvebu: use clocks property for serial ports
2014-04-26 00:34:33 +00:00
armv7-m.dtsi
ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs
2013-12-16 17:51:34 +01:00
at91-ariag25.dts
ARM: at91/dt: at91-ariag25: remove useless adc properties
2014-03-12 19:11:28 +01:00
at91-cosino_mega2560.dts
ARM: at91/dt: at91-cosino_mega2560 remove useless tsadcc node
2014-05-07 18:28:41 +02:00
at91-cosino.dtsi
ARM: at91/dt: at91-cosino: remove useless adc properties
2014-03-12 19:11:29 +01:00
at91-foxg20.dts
ARM: at91: switch Fox G20 board .dts to pre-processor defines
2013-05-31 16:42:28 +02:00
at91-qil_a9260.dts
ARM: at91: switch Calao QIL-A9260 board to DT
2013-12-19 17:27:30 +01:00
at91-sama5d3_xplained.dts
ARM: SoC updates for 3.16 (part 1)
2014-06-02 16:15:12 -07:00
at91rm9200_pqfp.dtsi
ARM: at91/dt: add at91rm9200 PQFP package version
2013-08-21 12:18:52 +02:00
at91rm9200.dtsi
ARM: at91/trivial: fix at91rm9200 rts/cts pinctrl definitions
2013-12-09 11:07:15 +01:00
at91rm9200ek.dts
ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order
2013-12-09 15:08:57 +01:00
at91sam9g15.dtsi
ARM: at91: dt: use #include for all device trees
2013-05-17 11:27:49 +02:00
at91sam9g15ek.dts
ARM: at91: dt: use #include for all device trees
2013-05-17 11:27:49 +02:00
at91sam9g20.dtsi
ARM: at91: dt: use #include for all device trees
2013-05-17 11:27:49 +02:00
at91sam9g20ek_2mmc.dts
ARM: at91: dt: switch to pinctrl to pre-processor
2013-05-17 12:11:39 +02:00
at91sam9g20ek_common.dtsi
ARM: at91: remove pinctrl conflict between mmc and SPI for at91sam9g20ek
2013-10-18 16:50:13 +02:00
at91sam9g20ek.dts
ARM: at91: dt: switch to standard GPIO flag defines.
2013-05-17 11:27:49 +02:00
at91sam9g25.dtsi
ARM: at91/dt: split sam9x5 peripheral definitions
2013-10-16 15:47:07 +02:00
at91sam9g25ek.dts
ARM: at91: dt: use #include for all device trees
2013-05-17 11:27:49 +02:00
at91sam9g35.dtsi
ARM: at91/dt: split sam9x5 peripheral definitions
2013-10-16 15:47:07 +02:00
at91sam9g35ek.dts
ARM: at91: dt: use #include for all device trees
2013-05-17 11:27:49 +02:00
at91sam9g45.dtsi
ARM: at91/dt: sam9g45: improve ADC/touchscreen support
2014-04-18 18:06:41 +02:00
at91sam9m10g45ek.dts
ARM: at91/dt: at91sam9m10g45ek PWM leds polarity is inversed
2014-04-18 18:07:54 +02:00
at91sam9n12.dtsi
ARM: at91/dt: define sam9n12 clocks
2014-05-22 18:03:16 +02:00
at91sam9n12ek.dts
ARM: at91/dt: define sam9n12ek crystal frequencies
2014-05-22 18:03:16 +02:00
at91sam9rl.dtsi
ARM: SoC updates for 3.16 (part 1)
2014-06-02 16:15:12 -07:00
at91sam9rlek.dts
Merge branch 'at91/cleanup' into next/dt
2014-05-23 23:02:30 +02:00
at91sam9x5_can.dtsi
ARM: at91/dt: define sam9x5 clocks
2014-05-22 18:03:13 +02:00
at91sam9x5_isi.dtsi
ARM: at91/dt: define sam9x5 clocks
2014-05-22 18:03:13 +02:00
at91sam9x5_lcd.dtsi
ARM: at91/dt: define sam9x5 clocks
2014-05-22 18:03:13 +02:00
at91sam9x5_macb0.dtsi
ARM: at91/dt: define sam9x5 clocks
2014-05-22 18:03:13 +02:00
at91sam9x5_macb1.dtsi
ARM: at91/dt: define sam9x5 clocks
2014-05-22 18:03:13 +02:00
at91sam9x5_usart3.dtsi
ARM: at91/dt: define sam9x5 clocks
2014-05-22 18:03:13 +02:00
at91sam9x5.dtsi
ARM: at91/dt: define sam9x5 clocks
2014-05-22 18:03:13 +02:00
at91sam9x5cm.dtsi
ARM: at91/dt: define sam9x5ek's crystal frequencies
2014-05-22 18:03:14 +02:00
at91sam9x5ek.dtsi
ARM: SoC DT updates for 3.12
2013-09-06 13:26:27 -07:00
at91sam9x25.dtsi
ARM: at91/dt: split sam9x5 peripheral definitions
2013-10-16 15:47:07 +02:00
at91sam9x25ek.dts
Adding the DT support to USB gadget High-Speed aka usba.
2013-06-14 18:58:28 -07:00
at91sam9x35.dtsi
ARM: at91/dt: split sam9x5 peripheral definitions
2013-10-16 15:47:07 +02:00
at91sam9x35ek.dts
ARM: at91: dt: use #include for all device trees
2013-05-17 11:27:49 +02:00
at91sam9260.dtsi
ARM: at91/dt: sam9260: correct external trigger value
2014-05-13 11:51:52 +02:00
at91sam9261.dtsi
ARM: SoC updates for 3.16 (part 1)
2014-06-02 16:15:12 -07:00
at91sam9261ek.dts
ARM: at91/dt: define main xtal frequency of the at91sam9261ek board
2014-05-07 18:27:56 +02:00
at91sam9263.dtsi
ARM: at91/dt: sam9263: fix compatibility string for the I2C
2014-02-07 17:20:37 +01:00
at91sam9263ek.dts
ARM: at91: sam9263ek: add dt lcd support
2013-12-09 11:10:10 +01:00
atlas6-evb.dts
atlas6.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
axm55xx.dtsi
ARM: dts: axxia: Add reset controller
2014-05-23 18:18:46 +02:00
axm5516-amarillo.dts
ARM: dts: Device tree for AXM55xx.
2014-05-23 18:18:45 +02:00
axm5516-cpus.dtsi
ARM: dts: Device tree for AXM55xx.
2014-05-23 18:18:45 +02:00
bcm2835-rpi-b.dts
ARM: bcm2835: add USB controller to device tree
2014-01-02 12:08:03 -08:00
bcm2835.dtsi
ARM: bcm2835: fix clock DT node names
2014-02-24 19:40:27 -07:00
bcm4708-netgear-r6250.dts
ARM: BCM5301X: add dts files for BCM4708 SoC
2014-02-19 09:15:59 -05:00
bcm4708.dtsi
ARM: BCM5301X: add dts files for BCM4708 SoC
2014-02-19 09:15:59 -05:00
bcm5301x.dtsi
ARM: BCM5301X: add dts files for BCM4708 SoC
2014-02-19 09:15:59 -05:00
bcm11351.dtsi
ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
2014-04-28 11:14:38 -04:00
bcm21664-garnet.dts
ARM: dts: bcm21664: Add device tree files.
2014-03-14 12:22:37 -04:00
bcm21664.dtsi
ARM: dts: use real clocks for bcm21664
2014-04-30 11:51:45 -07:00
bcm28155-ap.dts
ARM: dts: Enable the PWM for bcm28155 AP board
2014-04-28 11:14:47 -04:00
bcm59056.dtsi
ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators
2014-05-23 08:07:01 -04:00
berlin2-sony-nsz-gs7.dts
ARM: add Armada 1500 and Sony NSZ-GS7 device tree files
2013-12-13 16:31:05 +01:00
berlin2.dtsi
ARM: dts: berlin: add the pinctrl node and muxing setup for uarts
2014-05-19 23:02:31 +02:00
berlin2cd-google-chromecast.dts
ARM: add Armada 1500-mini and Chromecast device tree files
2013-12-13 16:31:06 +01:00
berlin2cd.dtsi
ARM: dts: berlin: add the pinctrl node and muxing setup for uarts
2014-05-19 23:02:31 +02:00
berlin2q-marvell-dmp.dts
ARM: dts: berlin: enable SD card reader and eMMC for the BG2Q DMP
2014-05-19 23:02:34 +02:00
berlin2q.dtsi
ARM: dts: berlin2q: set L2CC tag and data latency to 2 cycles
2014-06-16 13:09:04 +02:00
da850-enbw-cmc.dts
ARM: davinci: da850: Use #include for all device trees
2013-06-20 15:04:30 +05:30
da850-evm.dts
ARM: davinci: da850 evm: add GPIO pinumux entries DT node
2013-12-15 18:40:49 +05:30
da850.dtsi
ARM: davinci: da850: add GPIO DT node
2013-12-15 18:35:37 +05:30
dove-cm-a510.dts
ARM: dove: use preprocessor on device tree files
2013-09-30 15:00:35 +00:00
dove-cubox.dts
ARM: mvebu: dts: remove unneeded linux,default-state from led nodes
2013-11-23 17:34:40 +00:00
dove-d2plug.dts
ARM: dove: use preprocessor on device tree files
2013-09-30 15:00:35 +00:00
dove-d3plug.dts
ARM: dove: add initial DT file for Globalscale D3Plug
2013-09-30 15:00:54 +00:00
dove-dove-db.dts
ARM: dove: use preprocessor on device tree files
2013-09-30 15:00:35 +00:00
dove.dtsi
ARM: dove: drop pinctrl PMU reg property
2014-03-06 20:20:33 +00:00
dra7-evm.dts
ARM: dts: dra7: add support for parallel NAND flash
2014-05-19 17:20:31 -07:00
dra7.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
dra7xx-clocks.dtsi
Merge branch 'for-v3.16/ti-clk-drv' of github.com:t-kristo/linux-pm into clk-next
2014-06-10 16:53:25 -07:00
dra72-evm.dts
ARM: dts: Add support for DRA72x family of devices
2014-05-06 10:20:14 -07:00
dra72x.dtsi
ARM: dts: Add support for DRA72x family of devices
2014-05-06 10:20:14 -07:00
dra74x.dtsi
ARM: dts: Add support for DRA72x family of devices
2014-05-06 10:20:14 -07:00
ea3250.dts
ecx-2000.dts
ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
2013-11-04 17:01:05 -06:00
ecx-common.dtsi
EDAC updates for 3.13
2013-11-18 14:50:17 -08:00
efm32gg-dk3750.dts
ARM: efm32: properly namespace i2c location property
2014-03-14 16:04:30 +01:00
efm32gg.dtsi
ARM: efm32: fix unit address part in USART2 device nodes' names
2014-03-14 16:04:15 +01:00
elpida_ecb240abacn.dtsi
emev2-kzm9d.dts
ARM: shmobile: emev2: Use interrupt macros in DT files
2013-12-10 17:27:20 +09:00
emev2.dtsi
ARM: shmobile: emev2: Setup internal peripheral interrupts as level high
2013-12-10 17:27:21 +09:00
ethernut5.dts
ARM: at91: dt: switch to standard GPIO flag defines.
2013-05-17 11:27:49 +02:00
evk-pro3.dts
ARM: at91: dt: switch to standard GPIO flag defines.
2013-05-17 11:27:49 +02:00
exynos4.dtsi
ARM: dts: add hsotg device node for exynos4
2014-05-23 03:31:32 +09:00
exynos4x12-pinctrl.dtsi
ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals
2013-08-06 02:49:43 +09:00
exynos4x12.dtsi
ARM: dts: add exynos_usbphy node for exynos4
2014-05-23 03:31:32 +09:00
exynos5.dtsi
ARM: dts: update watchdog device nodes for exynos5250 and exynos5420
2014-02-24 08:49:50 +09:00
exynos3250-pinctrl.dtsi
ARM: dts: add dts files for exynos3250 SoC
2014-05-31 02:09:17 +09:00
exynos3250.dtsi
ARM: dts: add pmu sysreg node to exynos3250
2014-05-31 02:22:19 +09:00
exynos4210-origen.dts
ARM: dts: use key code macros on Origen and Arndale boards
2014-05-31 02:06:51 +09:00
exynos4210-pinctrl.dtsi
ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes
2013-08-07 01:08:24 +09:00
exynos4210-smdkv310.dts
ARM: dts: Update Exynos DT files with generic compatible strings
2014-03-21 02:17:22 +09:00
exynos4210-trats.dts
ARM: dts: Enable USB gadget functionality for exynos4210-trats
2014-05-23 02:34:11 +09:00
exynos4210-universal_c210.dts
ARM: dts: add external sd card node for exynos4210-universal_c210
2014-05-23 02:34:14 +09:00
exynos4210.dtsi
ARM: EXYNOS: Map SYSRAM through generic DT bindings
2014-05-15 03:30:05 +09:00
exynos4212.dtsi
Exynos cleanup for v3.15
2014-03-29 02:03:39 +01:00
exynos4412-odroidx.dts
Exynos cleanup for v3.15
2014-03-29 02:03:39 +01:00
exynos4412-origen.dts
ARM: dts: use key code macros on Origen and Arndale boards
2014-05-31 02:06:51 +09:00
exynos4412-smdk4412.dts
ARM: dts: Update Exynos DT files with generic compatible strings
2014-03-21 02:17:22 +09:00
exynos4412-tiny4412.dts
ARM: dts: Update Exynos DT files with generic compatible strings
2014-03-21 02:17:22 +09:00
exynos4412-trats2.dts
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
exynos4412.dtsi
ARM: dts: add PMU syscon node for exynos4
2014-05-23 03:31:32 +09:00
exynos5250-arndale.dts
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
exynos5250-cros-common.dtsi
ARM: dts: enable hdmi for exynos5250 based snow board
2014-05-19 22:54:48 +09:00
exynos5250-pinctrl.dtsi
ARM: dts: Add pwmX_out pinctrl nodes to exynos5250
2014-05-19 23:14:02 +09:00
exynos5250-smdk5250.dts
Exynos cleanup for v3.15
2014-03-29 02:03:39 +01:00
exynos5250-snow.dts
ARM: dts: enable dp-controller for exynos5250-snow board
2014-05-19 23:14:04 +09:00
exynos5250.dtsi
ARM: dts: add pmu syscon handle to exynos5250 hdmi
2014-05-23 02:45:42 +09:00
exynos5260-pinctrl.dtsi
ARM: dts: add dts files for exynos5260 SoC
2014-05-31 02:09:04 +09:00
exynos5260-xyref5260.dts
ARM: dts: add dts file for exynos5260-xyref5260 board
2014-05-31 02:09:10 +09:00
exynos5260.dtsi
ARM: dts: add dts files for exynos5260 SoC
2014-05-31 02:09:04 +09:00
exynos5410-smdk5410.dts
ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
2014-05-31 02:09:18 +09:00
exynos5410.dtsi
ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
2014-05-31 02:09:18 +09:00
exynos5420-arndale-octa.dts
Samsung 3rd DT updates for v3.16
2014-05-30 21:21:10 -07:00
exynos5420-peach-pit.dts
ARM: dts: correct the usb phy node in exynos5420-peach-pit
2014-05-31 02:11:39 +09:00
exynos5420-pinctrl.dtsi
ARM: dts: Add pwmX_out pinctrl nodes to exynos5420
2014-05-09 06:06:10 +09:00
exynos5420-smdk5420.dts
ARM: dts: Add MFC memory banks to exynos5420 boards
2014-05-20 01:04:13 +09:00
exynos5420.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
exynos5440-sd5v1.dts
ARM: dts: Update Exynos DT files with generic compatible strings
2014-03-21 02:17:22 +09:00
exynos5440-ssdk5440.dts
ARM: dts: Update Exynos DT files with generic compatible strings
2014-03-21 02:17:22 +09:00
exynos5440.dtsi
ARM: dts: update watchdog node name in exynos5440
2014-05-31 02:06:54 +09:00
exynos5800-peach-pi.dts
ARM: dts: correct the usb phy node in exynos5800-peach-pi
2014-05-31 02:11:42 +09:00
exynos5800.dtsi
ARM: dts: add mfc node for exynos5800
2014-05-31 02:09:17 +09:00
ge863-pro3.dtsi
ARM: at91: dt: use #include for all device trees
2013-05-17 11:27:49 +02:00
hi3620-hi4511.dts
ARM: dts: rename hi4511 dts file
2013-12-20 08:23:01 -08:00
hi3620.dtsi
ARM: dts: enable clock binding on Hi3620
2013-12-17 16:43:35 -08:00
highbank.dts
ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
2013-11-04 17:01:05 -06:00
imx6dl-cubox-i.dts
ARM: imx: initial SolidRun Cubox-i support
2014-01-27 14:21:01 +00:00
imx6dl-dfi-fs700-m60.dts
ARM: dts: imx6: Add DFI FS700-M60 board support
2014-02-10 16:27:40 +08:00
imx6dl-gw51xx.dts
ARM: dts: add Gateworks Ventana support
2014-02-09 21:28:53 +08:00
imx6dl-gw52xx.dts
ARM: dts: add Gateworks Ventana support
2014-02-09 21:28:53 +08:00
imx6dl-gw53xx.dts
ARM: dts: add Gateworks Ventana support
2014-02-09 21:28:53 +08:00
imx6dl-gw54xx.dts
ARM: dts: add Gateworks Ventana support
2014-02-09 21:28:53 +08:00
imx6dl-hummingboard.dts
ARM: imx: add HDMI support for SolidRun HummingBoard and Cubox-i
2014-05-16 23:02:08 +08:00
imx6dl-nitrogen6x.dts
ARM: dts: imx: add nitrogen6x board
2014-02-09 21:29:32 +08:00
imx6dl-phytec-pbab01.dts
ARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo
2014-05-16 23:01:53 +08:00
imx6dl-phytec-pfla02.dtsi
ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo
2014-05-16 23:01:52 +08:00
imx6dl-pinfunc.h
ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ
2014-02-09 21:29:44 +08:00
imx6dl-riotboard.dts
ARM: dts: imx6: add new board RIoTboard
2014-05-16 23:02:12 +08:00
imx6dl-sabreauto.dts
ARM: dts: imx: share pad macro names between imx6q and imx6dl
2013-08-22 23:29:11 +08:00
imx6dl-sabrelite.dts
ARM: dts: imx: sabrelite: add Dual Lite/Solo support
2014-02-09 21:29:16 +08:00
imx6dl-sabresd.dts
ARM: dts: imx: share pad macro names between imx6q and imx6dl
2013-08-22 23:29:11 +08:00
imx6dl-wandboard.dts
ARM: dts: imx6: Add support for imx6q wandboard
2013-08-22 23:29:28 +08:00
imx6dl.dtsi
ARM: dts: imx6: i2c4 cleanup
2014-05-16 23:02:12 +08:00
imx6q-arm2.dts
ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.
2014-02-10 16:27:27 +08:00
imx6q-cm-fx6.dts
ARM: dts: Add initial support for cm-fx6.
2014-02-09 21:28:55 +08:00
imx6q-cubox-i.dts
ARM: imx: initial SolidRun Cubox-i support
2014-01-27 14:21:01 +00:00
imx6q-dfi-fs700-m60.dts
ARM: dts: imx6: Add DFI FS700-M60 board support
2014-02-10 16:27:40 +08:00
imx6q-dmo-edmqmx6.dts
ARM: dts: imx6: edmqmx6: add vcc and vio power supplies to stmpe
2014-05-16 23:02:11 +08:00
imx6q-gk802.dts
ARM: dts: Add stdout-path property to i.MX boards
2014-05-16 23:02:07 +08:00
imx6q-gw51xx.dts
ARM: dts: add Gateworks Ventana support
2014-02-09 21:28:53 +08:00
imx6q-gw52xx.dts
ARM: dts: add Gateworks Ventana support
2014-02-09 21:28:53 +08:00
imx6q-gw53xx.dts
ARM: dts: add Gateworks Ventana support
2014-02-09 21:28:53 +08:00
imx6q-gw54xx.dts
ARM: dts: add Gateworks Ventana support
2014-02-09 21:28:53 +08:00
imx6q-gw5400-a.dts
ARM: dts: ventana: Add HDMI support
2014-05-16 23:02:03 +08:00
imx6q-nitrogen6x.dts
ARM: dts: imx: add nitrogen6x board
2014-02-09 21:29:32 +08:00
imx6q-phytec-pbab01.dts
ARM: dts: Add stdout-path property to i.MX boards
2014-05-16 23:02:07 +08:00
imx6q-phytec-pfla02.dtsi
ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo
2014-05-16 23:01:52 +08:00
imx6q-pinfunc.h
ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ
2014-02-09 21:29:44 +08:00
imx6q-sabreauto.dts
ARM: dtsi: enable ahci sata on imx6q platforms
2013-08-22 23:29:25 +08:00
imx6q-sabrelite.dts
ARM: dts: imx: sabrelite: add Dual Lite/Solo support
2014-02-09 21:29:16 +08:00
imx6q-sabresd.dts
ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsi
2014-03-07 16:17:59 +00:00
imx6q-sbc6x.dts
ARM: dts: imx6qdl: make pinctrl nodes board specific
2014-02-09 21:28:56 +08:00
imx6q-udoo.dts
ARM: dts: imx6q-udoo: Add HDMI support
2014-05-16 23:02:07 +08:00
imx6q-wandboard.dts
ARM: dts: imx6q-wandboard: Add sata support
2013-08-22 23:29:30 +08:00
imx6q.dtsi
ARM: SoC: device tree changes
2014-04-05 15:29:04 -07:00
imx6qdl-cubox-i.dtsi
ARM: imx: add HDMI support for SolidRun HummingBoard and Cubox-i
2014-05-16 23:02:08 +08:00
imx6qdl-dfi-fs700-m60.dtsi
ARM: dts: Add stdout-path property to i.MX boards
2014-05-16 23:02:07 +08:00
imx6qdl-gw51xx.dtsi
ARM: dts: ventana: Add HDMI support
2014-05-16 23:02:03 +08:00
imx6qdl-gw52xx.dtsi
ARM: dts: imx: Fix LVDS mapping for Ventana GW52xx
2014-05-16 23:02:07 +08:00
imx6qdl-gw53xx.dtsi
ARM: dts: imx: add LVDS backlight for Ventana
2014-05-16 23:02:06 +08:00
imx6qdl-gw54xx.dtsi
ARM: dts: imx: add LVDS backlight for Ventana
2014-05-16 23:02:06 +08:00
imx6qdl-microsom-ar8035.dtsi
ARM: dt: microsom: don't set bit 7 for ethernet mux settings
2014-04-14 10:22:37 +08:00
imx6qdl-microsom.dtsi
ARM: imx: initial SolidRun HummingBoard support
2014-01-27 14:18:09 +00:00
imx6qdl-nitrogen6x.dtsi
ARM: dts: Add stdout-path property to i.MX boards
2014-05-16 23:02:07 +08:00
imx6qdl-phytec-pbab01.dtsi
ARM: dts: pbab01: Enable DVI
2014-05-16 23:01:56 +08:00
imx6qdl-phytec-pfla02.dtsi
ARM: dts: pfla02: Add UART1 (uart3)
2014-05-16 23:01:55 +08:00
imx6qdl-sabreauto.dtsi
ARM: dts: imx6qdl-sabreauto: Support debug LED
2014-02-20 09:38:07 +08:00
imx6qdl-sabrelite.dtsi
ARM: dts: Add stdout-path property to i.MX boards
2014-05-16 23:02:07 +08:00
imx6qdl-sabresd.dtsi
ARM: dts: imx6qdl-sabresd: Add USDHC4 support
2014-05-16 23:02:09 +08:00
imx6qdl-wandboard.dtsi
ARM: dts: imx6qdl-wandboard: Add HDMI support
2014-05-16 23:02:02 +08:00
imx6qdl.dtsi
ARM: dts: imx6: update pcie to bring in line with new binding
2014-05-16 23:02:06 +08:00
imx6sl-evk.dts
ARM: dts: imx6sl-evk: Add an entry for MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11
2014-04-14 10:22:38 +08:00
imx6sl-pinfunc.h
imx6sl.dtsi
ARM: dts: imx: Add alias for ethernet controller
2014-04-30 13:35:18 +08:00
imx23-evk.dts
ARM: dts: imx: use generic node name for fixed regulator
2014-02-09 21:32:30 +08:00
imx23-olinuxino.dts
ARM: dts: imx: use generic node name for fixed regulator
2014-02-09 21:32:30 +08:00
imx23-pinfunc.h
ARM: dts: mxs: add pinctrl header files
2013-09-26 13:01:36 +08:00
imx23-stmp378x_devb.dts
ARM: dts: imx: use generic node name for fixed regulator
2014-02-09 21:32:30 +08:00
imx23.dtsi
ARM: dts: mxs: add mxs phy controller id
2014-02-09 21:33:36 +08:00
imx25-eukrea-cpuimx25.dtsi
ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.
2014-02-09 21:33:21 +08:00
imx25-eukrea-mbimxsd25-baseboard.dts
ARM: dts: mbimxsd25 baseboard: Add USB support
2014-04-30 13:35:20 +08:00
imx25-karo-tx25.dts
ARM: dts: Karo TX25: use hardware ecc
2014-05-16 23:02:11 +08:00
imx25-pdk.dts
ARM: dts: imx25-pdk: Add USB Host1 support
2014-05-16 23:01:44 +08:00
imx25-pinfunc.h
ARM: dts: imx25: Add pinctrl functions.
2014-02-09 21:32:31 +08:00
imx25.dtsi
ARM: dts: i.MX25: Add IRAM node
2014-05-16 23:02:10 +08:00
imx27-apf27.dts
ARM: dts: imx: add required #clock-cells for fixed-clock
2014-04-14 10:22:39 +08:00
imx27-apf27dev.dts
ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keys
2014-02-09 21:33:14 +08:00
imx27-pdk.dts
ARM: dts: imx: Remove excess entries for PMIC
2014-05-16 23:02:04 +08:00
imx27-phytec-phycard-s-rdk.dts
ARM: dts: Add stdout-path property to i.MX boards
2014-05-16 23:02:07 +08:00
imx27-phytec-phycard-s-som.dtsi
ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi
2014-02-13 09:57:32 +08:00
imx27-phytec-phycore-rdk.dts
ARM: dts: Add stdout-path property to i.MX boards
2014-05-16 23:02:07 +08:00
imx27-phytec-phycore-som.dtsi
ARM: dts: imx: Remove excess entries for PMIC
2014-05-16 23:02:04 +08:00
imx27-pinfunc.h
ARM: dts: i.MX27: Configure GPIOs as "input" by default
2014-02-09 21:33:15 +08:00
imx27.dtsi
ARM: dts: imx27-pdk: Add keypad support
2014-05-16 23:02:01 +08:00
imx28-apf28.dts
ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers
2013-09-26 13:01:36 +08:00
imx28-apf28dev.dts
ARM: dts: imx28-apf28dev: add user button
2014-02-09 21:33:45 +08:00
imx28-apx4devkit.dts
ARM: dts: imx: use generic node name for fixed regulator
2014-02-09 21:32:30 +08:00
imx28-cfa10036.dts
ARM: dts: cfa10036: Add dr_mode and phy_type properties to the DT
2014-02-09 21:32:48 +08:00
imx28-cfa10037.dts
ARM: i.MX28: dts: rename usbphy pin names
2014-02-09 21:33:22 +08:00
imx28-cfa10049.dts
ARM: i.MX28: dts: rename usbphy pin names
2014-02-09 21:33:22 +08:00
imx28-cfa10055.dts
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
2013-09-26 13:01:37 +08:00
imx28-cfa10056.dts
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
2013-09-26 13:01:37 +08:00
imx28-cfa10057.dts
ARM: i.MX28: dts: rename usbphy pin names
2014-02-09 21:33:22 +08:00
imx28-cfa10058.dts
ARM: i.MX28: dts: rename usbphy pin names
2014-02-09 21:33:22 +08:00
imx28-duckbill.dts
ARM: dts: imx28-duckbill: use symbolic names from gpio.h
2014-05-16 23:01:48 +08:00
imx28-eukrea-mbmx28lc.dtsi
ARM: mxs: Add support for the eukrea-cpuimx28.
2014-02-09 21:33:20 +08:00
imx28-eukrea-mbmx283lc.dts
ARM: mxs: Add support for the eukrea-cpuimx28.
2014-02-09 21:33:20 +08:00
imx28-eukrea-mbmx287lc.dts
ARM: mxs: Add support for the eukrea-cpuimx28.
2014-02-09 21:33:20 +08:00
imx28-evk.dts
ARM: dts: imx28-evk: Run I2C0 at 400kHz
2014-02-09 21:33:00 +08:00
imx28-m28cu3.dts
ARM: dts: imx28-m28cu3: Remove 'reset-active-high'
2014-02-09 21:33:52 +08:00
imx28-m28evk.dts
ARM: dts: mxs: Fix the RTC compatible prop on M28EVK
2014-02-21 10:08:43 +08:00
imx28-pinfunc.h
ARM: dts: mxs: add pinctrl header files
2013-09-26 13:01:36 +08:00
imx28-sps1.dts
ARM: i.MX28: dts: rename usbphy pin names
2014-02-09 21:33:22 +08:00
imx28-tx28.dts
ARM: dts: imx28-tx28: Remove 'enable-active-low' property
2014-02-10 11:19:43 +08:00
imx28.dtsi
ARM: dts: imx28: include gpio.h to allow use of symbolic names
2014-05-16 23:01:47 +08:00
imx31-bug.dts
imx31.dtsi
ARM: dts: imx: Add the missing cpus node
2013-08-22 23:29:01 +08:00
imx35-eukrea-cpuimx35.dtsi
ARM: dts: cpuimx35 Add touchscreen support.
2014-05-16 23:01:50 +08:00
imx35-eukrea-mbimxsd35-baseboard.dts
ARM: dts: mbimxsd35 baseboard: Add USB support.
2014-04-30 13:35:20 +08:00
imx35-pdk.dts
ARM: dts: imx35-pdk: Fix memory region description
2014-05-16 23:02:13 +08:00
imx35-pinfunc.h
imx35.dtsi
ARM: dts: i.MX35: Add USB support.
2014-04-30 13:35:20 +08:00
imx50-evk.dts
ARM: dts: imx: add device tree support for Freescale imx50evk board
2014-02-09 21:32:21 +08:00
imx50-pinfunc.h
ARM: dts: imx: add device tree pin definitions for the IMX50
2014-02-09 21:32:18 +08:00
imx50.dtsi
ARM: dts: imx: Add alias for ethernet controller
2014-04-30 13:35:18 +08:00
imx51-apf51.dts
ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions
2014-02-09 21:32:51 +08:00
imx51-apf51dev.dts
ARM: SoC: device tree changes
2014-04-05 15:29:04 -07:00
imx51-babbage.dts
ARM: dts: i.MX51 babbage: Fix FEC pad ctrl settings
2014-05-16 23:02:09 +08:00
imx51-digi-connectcore-jsk.dts
ARM i.MX51: Add Digi ConnectCore devicetree
2014-05-16 23:01:51 +08:00
imx51-digi-connectcore-som.dtsi
ARM: dts: i.MX51: Allow to define partitions onto NFC
2014-05-16 23:01:56 +08:00
imx51-eukrea-cpuimx51.dtsi
ARM: dts: cpuimx51 Add touchscreen support.
2014-05-16 23:01:50 +08:00
imx51-eukrea-mbimxsd51-baseboard.dts
ARM: dts: imx51-eukrea-mbimxsd51-baseboard: Add CAN support
2014-05-16 23:02:12 +08:00
imx51-pinfunc.h
imx51.dtsi
ARM: dts: i.MX51: Allow to define partitions onto NFC
2014-05-16 23:01:56 +08:00
imx53-ard.dts
ARM: dts: imx: use generic node name for fixed regulator
2014-02-09 21:32:30 +08:00
imx53-m53evk.dts
ARM: dts: mx5: fix wrong stmpe-ts bindings
2014-04-14 10:22:37 +08:00
imx53-mba53.dts
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
imx53-pinfunc.h
imx53-qsb-common.dtsi
ARM: dts: Add stdout-path property to i.MX boards
2014-05-16 23:02:07 +08:00
imx53-qsb.dts
ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi
2014-03-07 16:17:58 +00:00
imx53-qsrb.dts
ARM: dts: i.MX53: add support for MCIMX53-START-R
2014-02-09 21:33:43 +08:00
imx53-smd.dts
ARM: dts: imx53: make pinctrl nodes board specific
2014-02-09 21:32:25 +08:00
imx53-tqma53.dtsi
ARM: dts: imx: use generic node name for fixed regulator
2014-02-09 21:32:30 +08:00
imx53-tx53-x03x.dts
ARM: dts: imx53-tx53: add IPU DI ports and endpoints
2014-04-14 10:22:38 +08:00
imx53-tx53-x13x.dts
ARM: dts: imx53: add support for Ka-Ro TX53 modules
2014-02-09 21:33:48 +08:00
imx53-tx53.dtsi
ARM: dts: mx53: Remove 'enable-active-low' property
2014-02-10 11:19:36 +08:00
imx53-voipac-bsb.dts
ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 module
2014-02-09 21:32:24 +08:00
imx53-voipac-dmm-668.dtsi
ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module
2014-02-09 21:32:23 +08:00
imx53.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
integrator.dtsi
ARM: integrator: move EBI to the device tree
2013-12-04 16:22:31 +01:00
integratorap.dts
ARM: integrator: define clocks in the device trees
2014-02-13 11:20:31 +01:00
integratorcp.dts
ARM: integrator: define clocks in the device trees
2014-02-13 11:20:31 +01:00
k2e-clocks.dtsi
ARM: dts: keystone: add support for k2 Edison SoC and EVM
2014-02-26 10:06:56 -05:00
k2e-evm.dts
ARM: dts: keystone-evm: add spi nor flash support
2014-05-12 11:43:59 -04:00
k2e.dtsi
ARM: dts: keystone: add support for k2 Edison SoC and EVM
2014-02-26 10:06:56 -05:00
k2hk-clocks.dtsi
ARM: dts: keystone: Fix control register range for clktsip
2014-03-18 15:59:26 -04:00
k2hk-evm.dts
ARM: dts: keystone-evm: add spi nor flash support
2014-05-12 11:43:59 -04:00
k2hk.dtsi
ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs
2014-02-26 10:06:56 -05:00
k2l-clocks.dtsi
ARM: dts: keystone: add support for K2 Lamarr SoC and EVM
2014-02-26 10:06:56 -05:00
k2l-evm.dts
ARM: dts: keystone-evm: add spi nor flash support
2014-05-12 11:43:59 -04:00
k2l.dtsi
ARM: dts: keystone: add support for K2 Lamarr SoC and EVM
2014-02-26 10:06:56 -05:00
keystone-clocks.dtsi
ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs
2014-02-26 10:06:56 -05:00
keystone.dtsi
ARM: SoC updates for 3.16 (part 2)
2014-06-11 11:03:24 -07:00
kirkwood-98dx4122.dtsi
ARM: dts: kirkwood: resynch 98dx4122 dtsi
2014-05-16 17:56:51 +00:00
kirkwood-6192.dtsi
ARM: dts: kirkwood: consolidate common pinctrl settings
2014-05-05 00:52:28 +00:00
kirkwood-6281.dtsi
ARM: dts: kirkwood: consolidate common pinctrl settings
2014-05-05 00:52:28 +00:00
kirkwood-6282.dtsi
ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282
2014-05-05 00:53:24 +00:00
kirkwood-b3.dts
mvebu DT changes for v3.16
2014-05-19 21:55:03 -07:00
kirkwood-cloudbox.dts
mvebu DT changes for v3.16
2014-05-19 21:55:03 -07:00
kirkwood-db-88f6281.dts
ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding
2013-10-01 16:28:03 +00:00
kirkwood-db-88f6282.dts
ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding
2013-10-01 16:28:03 +00:00
kirkwood-db.dtsi
ARM: dts: kirkwood: set default pinctrl for NAND
2014-05-05 00:53:06 +00:00
kirkwood-dns320.dts
ARM: dts: kirkwood: set default pinctrl for UART0/1
2014-05-05 00:52:45 +00:00
kirkwood-dns325.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-dnskw.dtsi
ARM: dts: kirkwood: set default pinctrl for NAND
2014-05-05 00:53:06 +00:00
kirkwood-dockstar.dts
ARM: dts: kirkwood: rename pin-controller nodes
2014-05-05 00:51:33 +00:00
kirkwood-dreamplug.dts
mvebu DT changes for v3.16
2014-05-19 21:55:03 -07:00
kirkwood-ds109.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-ds110jv10.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-ds111.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-ds112.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-ds209.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-ds210.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-ds212.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-ds212j.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-ds409.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-ds409slim.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-ds411.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-ds411j.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-ds411slim.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-goflexnet.dts
ARM: dts: kirkwood: rename pin-controller nodes
2014-05-05 00:51:33 +00:00
kirkwood-guruplug-server-plus.dts
ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id
2014-05-05 00:53:41 +00:00
kirkwood-ib62x0.dts
ARM: dts: kirkwood: set default pinctrl for NAND
2014-05-05 00:53:06 +00:00
kirkwood-iconnect.dts
ARM: dts: kirkwood: rename pin-controller nodes
2014-05-05 00:51:33 +00:00
kirkwood-iomega_ix2_200.dts
ARM: dts: kirkwood: rename pin-controller nodes
2014-05-05 00:51:33 +00:00
kirkwood-is2.dts
ARM: SoC board updates for 3.12
2013-09-06 13:34:43 -07:00
kirkwood-km_common.dtsi
ARM: dts: kirkwood: add kirkwood-km_common DTSI files
2014-05-16 17:57:19 +00:00
kirkwood-km_fixedeth.dts
ARM: dts: kirkwood: add kirkwood-km_fixedeth DTS file
2014-05-16 17:57:27 +00:00
kirkwood-km_kirkwood.dts
ARM: dts: kirkwood: add kirkwood-km_common DTSI files
2014-05-16 17:57:19 +00:00
kirkwood-laplug.dts
mvebu DT changes for v3.16
2014-05-19 21:55:03 -07:00
kirkwood-lschlv2.dts
ARM: kirkwood: Use the preprocessor on device tree files
2013-08-06 14:11:37 +00:00
kirkwood-lsxhl.dts
ARM: kirkwood: Use the preprocessor on device tree files
2013-08-06 14:11:37 +00:00
kirkwood-lsxl.dtsi
ARM: dts: kirkwood: rename pin-controller nodes
2014-05-05 00:51:33 +00:00
kirkwood-mplcec4.dts
ARM: dts: kirkwood: set default pinctrl for NAND
2014-05-05 00:53:06 +00:00
kirkwood-mv88f6281gtw-ge.dts
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
kirkwood-netgear_readynas_duo_v2.dts
ARM: dts: kirkwood: set default pinctrl for UART0/1
2014-05-05 00:52:45 +00:00
kirkwood-netgear_readynas_nv+_v2.dts
ARM: dts: kirkwood: set default pinctrl for UART0/1
2014-05-05 00:52:45 +00:00
kirkwood-ns2-common.dtsi
mvebu DT changes for v3.16
2014-05-19 21:55:03 -07:00
kirkwood-ns2.dts
ARM: SoC board updates for 3.12
2013-09-06 13:34:43 -07:00
kirkwood-ns2lite.dts
ARM: DT: Kirkwood: Use symbolic names from gpio.h
2013-12-08 01:00:54 +00:00
kirkwood-ns2max.dts
ARM: DT: Kirkwood: Use symbolic names from gpio.h
2013-12-08 01:00:54 +00:00
kirkwood-ns2mini.dts
ARM: DT: Kirkwood: Use symbolic names from gpio.h
2013-12-08 01:00:54 +00:00
kirkwood-nsa3x0-common.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
kirkwood-nsa310.dts
mvebu DT changes for v3.16
2014-05-19 21:55:03 -07:00
kirkwood-nsa310a.dts
mvebu DT changes for v3.16
2014-05-19 21:55:03 -07:00
kirkwood-nsa320.dts
ARM: dts: kirkwood: rename pin-controller nodes
2014-05-05 00:51:33 +00:00
kirkwood-openblocks_a6.dts
mvebu DT changes for v3.16
2014-05-19 21:55:03 -07:00
kirkwood-openblocks_a7.dts
mvebu DT changes for v3.16
2014-05-19 21:55:03 -07:00
kirkwood-openrd-base.dts
ARM: Kirkwood: DT versions of OpenRD boards
2014-05-16 05:20:38 +00:00
kirkwood-openrd-client.dts
ARM: Kirkwood: DT versions of OpenRD boards
2014-05-16 05:20:38 +00:00
kirkwood-openrd-ultimate.dts
ARM: Kirkwood: DT versions of OpenRD boards
2014-05-16 05:20:38 +00:00
kirkwood-openrd.dtsi
ARM: Kirkwood: DT versions of OpenRD boards
2014-05-16 05:20:38 +00:00
kirkwood-rd88f6192.dts
ARM: dts: kirkwood: set default pinctrl for SPI0
2014-05-05 00:52:55 +00:00
kirkwood-rd88f6281-a0.dts
ARM: Kirkwood: convert rd88f6281-setup.c to DT.
2014-02-17 03:01:25 +00:00
kirkwood-rd88f6281-a1.dts
ARM: Kirkwood: convert rd88f6281-setup.c to DT.
2014-02-17 03:01:25 +00:00
kirkwood-rd88f6281.dtsi
ARM: dts: kirkwood: rename pin-controller nodes
2014-05-05 00:51:33 +00:00
kirkwood-rs212.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-rs409.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-rs411.dts
ARM: dts: kirkwood: add stdout-path property to all boards
2014-05-05 00:48:35 +00:00
kirkwood-sheevaplug-common.dtsi
ARM: dts: kirkwood: set default pinctrl for NAND
2014-05-05 00:53:06 +00:00
kirkwood-sheevaplug-esata.dts
ARM: DT: Kirkwood: Use symbolic names from gpio.h
2013-12-08 01:00:54 +00:00
kirkwood-sheevaplug.dts
ARM: DT: Kirkwood: Use symbolic names from gpio.h
2013-12-08 01:00:54 +00:00
kirkwood-synology.dtsi
ARM: dts: kirkwood: set default pinctrl for I2C0
2014-05-05 00:53:15 +00:00
kirkwood-t5325.dts
ARM: Kirkwood: t5325: Use simple card to instantiate audio
2014-05-05 01:18:45 +00:00
kirkwood-topkick.dts
ARM: dts: kirkwood: set default pinctrl for I2C0
2014-05-05 00:53:15 +00:00
kirkwood-ts219-6281.dts
ARM: dts: kirkwood: rename pin-controller nodes
2014-05-05 00:51:33 +00:00
kirkwood-ts219-6282.dts
ARM: dts: kirkwood: rename pin-controller nodes
2014-05-05 00:51:33 +00:00
kirkwood-ts219.dtsi
ARM: dts: kirkwood: set default pinctrl for I2C0
2014-05-05 00:53:15 +00:00
kirkwood-ts419-6281.dts
ARM: Kirkwood: Add DT description of QNAP 419
2014-02-05 02:22:07 +00:00
kirkwood-ts419-6282.dts
ARM: Kirkwood: Add DT description of QNAP 419
2014-02-05 02:22:07 +00:00
kirkwood-ts419.dtsi
ARM: dts: kirkwood: rename pin-controller nodes
2014-05-05 00:51:33 +00:00
kirkwood.dtsi
ARM: Kirkwood: DT: Add missing #sound-dai-cells property
2014-05-05 01:18:44 +00:00
kizbox.dts
ARM: at91/dt: add watchdog properties to kizbox board
2014-01-28 21:33:38 +01:00
lpc32xx.dtsi
ARM: dts: lpc32xx: cpus/cpu nodes dts updates
2013-05-23 10:45:13 +01:00
Makefile
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
marco-evb.dts
marco.dtsi
ARM: l2c: prima2: convert to generic l2c OF initialisation
2014-05-30 00:49:55 +01:00
mmp2-brownstone.dts
mmp2.dtsi
moxart-uc7112lx.dts
ARM: moxart: move fixed rate clock child node to board level dts
2014-01-23 18:13:44 -08:00
moxart.dtsi
ARM: moxart: move fixed rate clock child node to board level dts
2014-01-23 18:13:44 -08:00
mpa1600.dts
ARM: at91: dt: switch to standard GPIO flag defines.
2013-05-17 11:27:49 +02:00
mxs-pinfunc.h
ARM: dts: mxs: add pinctrl header files
2013-09-26 13:01:36 +08:00
nspire-classic.dtsi
arm: Add device trees for TI-Nspire hardware
2013-06-21 20:06:29 +02:00
nspire-clp.dts
arm: Add device trees for TI-Nspire hardware
2013-06-21 20:06:29 +02:00
nspire-cx.dts
arm: Add device trees for TI-Nspire hardware
2013-06-21 20:06:29 +02:00
nspire-tp.dts
arm: Add device trees for TI-Nspire hardware
2013-06-21 20:06:29 +02:00
nspire.dtsi
arm: Add device trees for TI-Nspire hardware
2013-06-21 20:06:29 +02:00
omap2.dtsi
ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox
2014-04-25 09:53:43 -07:00
omap3-beagle-xm-ab.dts
ARM: dts: Add support for the BeagleBoard xM A/B
2014-04-18 16:50:23 -07:00
omap3-beagle-xm.dts
ARM: omap3-beagle-xm.dts: add display information
2014-03-19 11:11:38 +02:00
omap3-beagle.dts
ARM: omap3-beagle.dts: add display information
2014-03-19 11:11:27 +02:00
omap3-cm-t3x30.dtsi
ARM: dts: Fix GPMC Ethernet timings for omap cm-t sbc-t boards for device tree
2014-04-23 11:29:49 -07:00
omap3-cm-t3x.dtsi
ARM: dts: cm-t3x30: add HS USB Host support
2014-02-28 14:09:11 -08:00
omap3-cm-t3517.dts
ARM: dts: sbc-t3517: add support for sbc-t3517
2014-02-28 14:09:14 -08:00
omap3-cm-t3530.dts
ARM: dts: Add MMC2/SDIO/WLAN support for cm-t3530
2014-03-12 10:40:37 -07:00
omap3-cm-t3730.dts
ARM: dts: sbc-t3x: refactor DT support
2014-02-28 14:09:08 -08:00
omap3-devkit8000.dts
ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nand
2014-04-18 16:37:43 -07:00
omap3-evm-37xx.dts
fbdev changes for 3.16 (omap devicetree)
2014-06-09 18:32:13 -07:00
omap3-evm-common.dtsi
ARM: dts: Add LCD panel sharp ls037v7dw01 support for omap3-evm and ldp
2014-06-03 10:22:21 +03:00
omap3-evm.dts
ARM: dts: Add common support for omap3-evm
2013-10-14 11:34:37 -07:00
omap3-gta04.dts
ARM: dts: omap3-gta04: Add display support
2014-06-03 10:22:21 +03:00
omap3-igep0020.dts
ARM: dts: omap3-igep0020: use SMSC9221 timings
2014-04-25 09:30:00 -07:00
omap3-igep0030.dts
ARM: dts: omap3-igep: fix boot fail due wrong compatible match
2014-02-28 11:29:18 -08:00
omap3-igep.dtsi
ARM: dts: omap3-igep0020: use SMSC9221 timings
2014-04-25 09:30:00 -07:00
omap3-ldp.dts
fbdev changes for 3.16 (omap devicetree)
2014-06-09 18:32:13 -07:00
omap3-lilly-a83x.dtsi
ARM: dts: omap3 a83x: fix duplicate usb pin config
2014-05-27 13:51:01 -07:00
omap3-lilly-dbb056.dts
ARM: dts: omap3: Add support for INCOstartec DBB056 baseboard
2014-02-28 15:04:28 -08:00
omap3-n9.dts
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
2014-02-13 15:21:36 -08:00
omap3-n900.dts
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
2014-06-09 18:46:02 -07:00
omap3-n950-n9.dtsi
ARM: dts: n950: Add missing regulator definitions
2014-05-06 10:19:49 -07:00
omap3-n950.dts
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
2014-02-13 15:21:36 -08:00
omap3-overo-alto35-common.dtsi
ARM: dts: overo: Add support for 3.5'' LCD output
2014-06-03 10:22:23 +03:00
omap3-overo-alto35.dts
ARM: dts: Add support for the Overo Alto35
2014-03-12 10:21:14 -07:00
omap3-overo-base.dtsi
ARM: dts: overo: Push uart3 pinmux down to expansion board
2014-03-12 10:18:16 -07:00
omap3-overo-chestnut43-common.dtsi
ARM: dts: overo: Add support for 4.3'' LCD output
2014-06-03 10:22:22 +03:00
omap3-overo-chestnut43.dts
ARM: dts: Add support for the Overo Chestnut43
2014-03-12 10:21:15 -07:00
omap3-overo-common-dvi.dtsi
ARM: dts: overo: Add support for DVI output
2014-06-03 10:22:22 +03:00
omap3-overo-common-lcd35.dtsi
ARM: dts: overo: Add support for 3.5'' LCD output
2014-06-03 10:22:23 +03:00
omap3-overo-common-lcd43.dtsi
ARM: dts: overo: Add support for 4.3'' LCD output
2014-06-03 10:22:22 +03:00
omap3-overo-common-peripherals.dtsi
ARM: dts: overo: Add LIS33DE accelerometer
2014-03-12 10:21:12 -07:00
omap3-overo-gallop43-common.dtsi
ARM: dts: overo: Add support for 4.3'' LCD output
2014-06-03 10:22:22 +03:00
omap3-overo-gallop43.dts
ARM: dts: Add support for the Overo Gallop43
2014-03-12 10:21:14 -07:00
omap3-overo-palo43-common.dtsi
ARM: dts: overo: Add support for 4.3'' LCD output
2014-06-03 10:22:22 +03:00
omap3-overo-palo43.dts
ARM: dts: Add support for the Overo Palo43
2014-03-12 10:21:13 -07:00
omap3-overo-storm-alto35.dts
ARM: dts: Add support for the Overo Alto35
2014-03-12 10:21:14 -07:00
omap3-overo-storm-chestnut43.dts
ARM: dts: Add support for the Overo Chestnut43
2014-03-12 10:21:15 -07:00
omap3-overo-storm-gallop43.dts
ARM: dts: Add support for the Overo Gallop43
2014-03-12 10:21:14 -07:00
omap3-overo-storm-palo43.dts
ARM: dts: Add support for the Overo Palo43
2014-03-12 10:21:13 -07:00
omap3-overo-storm-summit.dts
ARM: dts: Add support for the Overo Summit
2014-03-12 10:21:16 -07:00
omap3-overo-storm-tobi.dts
ARM: dts: overo: reorganize include files
2014-03-12 10:17:25 -07:00
omap3-overo-storm.dtsi
ARM: dts: omap3-overo: Add HSUSB PHY
2014-03-12 10:17:27 -07:00
omap3-overo-summit-common.dtsi
ARM: dts: overo: Add support for DVI output
2014-06-03 10:22:22 +03:00
omap3-overo-summit.dts
ARM: dts: Add support for the Overo Summit
2014-03-12 10:21:16 -07:00
omap3-overo-tobi-common.dtsi
ARM: dts: overo: Add support for DVI output
2014-06-03 10:22:22 +03:00
omap3-overo-tobi.dts
ARM: dts: overo: reorganize include files
2014-03-12 10:17:25 -07:00
omap3-overo.dtsi
Merge branch '3.15/dss-dt-dts' into 3.15/fbdev
2014-03-20 08:18:27 +02:00
omap3-panel-sharp-ls037v7dw01.dtsi
ARM: dts: Add LCD panel sharp ls037v7dw01 support for omap3-evm and ldp
2014-06-03 10:22:21 +03:00
omap3-sb-t35.dtsi
ARM: dts: Fix GPMC timings for LAN9220
2014-04-23 11:30:09 -07:00
omap3-sbc-t3517.dts
ARM: dts: Fix GPMC Ethernet timings for omap cm-t sbc-t boards for device tree
2014-04-23 11:29:49 -07:00
omap3-sbc-t3530.dts
ARM: dts: sbc-t3530: add support for sbc-t3530
2014-02-28 14:09:13 -08:00
omap3-sbc-t3730.dts
ARM: dts: sbc-t3730: add pinmux for usb hub reset
2014-02-28 14:09:12 -08:00
omap3-zoom3.dts
ARM: dts: Split omap3 pinmux core device
2014-01-07 14:01:39 -08:00
omap3.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
omap3xxx-clocks.dtsi
ARM: dts: set 'ti,set-rate-parent' for dpll4_m5 path
2014-05-16 17:08:57 +03:00
omap4-cpu-thermal.dtsi
arm: dts: add omap4 CPU thermal data
2013-12-04 09:34:25 -04:00
omap4-duovero-parlor.dts
ARM: dts: duovero-parlor: Add HDMI output
2014-06-03 10:22:23 +03:00
omap4-duovero.dtsi
ARM: dts: Enable mcpdm and mcbsp1 on DuoVero
2014-05-19 17:20:31 -07:00
omap4-panda-a4.dts
ARM: dts: OMAP2+: Use pinctrl constants
2013-06-18 18:53:40 -05:00
omap4-panda-common.dtsi
ARM: dts: Fix omap serial wake-up when booted with device tree
2014-05-06 13:48:35 -07:00
omap4-panda-es.dts
ARM: dts: omap4-panda-es: Do not reset gpio1
2013-10-20 19:16:53 +02:00
omap4-panda.dts
ARM: dts: OMAP2+: Use #include for all device trees
2013-06-18 18:53:38 -05:00
omap4-sdp-es23plus.dts
ARM: dts: OMAP2+: Use pinctrl constants
2013-06-18 18:53:40 -05:00
omap4-sdp.dts
ARM: dts: Fix omap serial wake-up when booted with device tree
2014-05-06 13:48:35 -07:00
omap4-var-dvk-om44.dts
ARM: dts: Add VAR-SOM-OM44 WLAN nodes
2014-05-19 17:20:30 -07:00
omap4-var-om44customboard.dtsi
ARM: dts: Add support for OMAP4 Variscite OM44 family
2014-05-19 17:20:30 -07:00
omap4-var-som-om44-wlan.dtsi
ARM: dts: Add VAR-SOM-OM44 WLAN nodes
2014-05-19 17:20:30 -07:00
omap4-var-som-om44.dtsi
ARM: dts: Add support for OMAP4 Variscite OM44 family
2014-05-19 17:20:30 -07:00
omap4-var-stk-om44.dts
ARM: dts: Add VAR-SOM-OM44 WLAN nodes
2014-05-19 17:20:30 -07:00
omap4.dtsi
fbdev changes for 3.16 (omap devicetree)
2014-06-09 18:32:13 -07:00
omap5-cm-t54.dts
ARM: dts: Change IOPAD macro's for OMAP4/5
2014-05-19 17:20:29 -07:00
omap5-core-thermal.dtsi
arm: dts: add omap5 CORE thermal data
2013-12-04 09:34:26 -04:00
omap5-gpu-thermal.dtsi
arm: dts: add omap5 GPU thermal data
2013-12-04 09:34:26 -04:00
omap5-sbc-t54.dts
ARM: dts: Change IOPAD macro's for OMAP4/5
2014-05-19 17:20:29 -07:00
omap5-uevm.dts
ARM: dts: omap5-uevm.dts: add display nodes
2014-06-03 10:22:21 +03:00
omap5.dtsi
fbdev changes for 3.16 (omap devicetree)
2014-06-09 18:32:13 -07:00
omap24xx-clocks.dtsi
ARM: dts: omap2 clock data
2014-05-28 13:11:36 +03:00
omap34xx-hs.dtsi
ARM: dts: Fix booting for secure omaps
2013-12-06 15:30:43 -08:00
omap34xx-omap36xx-clocks.dtsi
ARM: dts: omap3 clock data
2014-01-17 12:36:41 -08:00
omap34xx.dtsi
ARM: dts: omap3-n900: Add SSI support
2014-05-27 11:59:44 -07:00
omap36xx-am35xx-omap3430es2plus-clocks.dtsi
ARM: dts: fix omap3 dss clock handle names
2014-03-19 09:31:47 +02:00
omap36xx-clocks.dtsi
ARM: dts: use ti,fixed-factor-clock for dpll4_m5x2_mul_ck
2014-05-16 17:08:57 +03:00
omap36xx-hs.dtsi
ARM: dts: Fix booting for secure omaps
2013-12-06 15:30:43 -08:00
omap36xx-omap3430es2plus-clocks.dtsi
ARM: dts: omap3 clocks: simplify ssi aliases
2014-02-28 14:02:25 -08:00
omap36xx.dtsi
ARM: dts: omap3-n900: Add SSI support
2014-05-27 11:59:44 -07:00
omap44xx-clocks.dtsi
ARM: dts: omap4 clock data
2014-01-17 12:35:57 -08:00
omap54xx-clocks.dtsi
Merge branch 'for-v3.16/ti-clk-drv' of github.com:t-kristo/linux-pm into clk-next
2014-06-10 16:53:25 -07:00
omap443x-clocks.dtsi
ARM: dts: omap4 clock data
2014-01-17 12:35:57 -08:00
omap443x.dtsi
ARM: dts: OMAP4: Add device nodes for ABB
2014-03-05 11:53:36 -08:00
omap446x-clocks.dtsi
ARM: dts: omap4 clock data
2014-01-17 12:35:57 -08:00
omap2420-clocks.dtsi
ARM: dts: omap2 clock data
2014-05-28 13:11:36 +03:00
omap2420-h4.dts
ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
2013-10-08 17:51:40 +02:00
omap2420-n8x0-common.dtsi
ARM: OMAP2+: dts: add n8x0 onenand
2013-11-25 15:38:09 -08:00
omap2420-n800.dts
ARM: dts: Add basic Nokia N8X0 support
2013-11-25 15:15:24 -08:00
omap2420-n810-wimax.dts
ARM: dts: Add basic Nokia N8X0 support
2013-11-25 15:15:24 -08:00
omap2420-n810.dts
ARM: dts: Add basic Nokia N8X0 support
2013-11-25 15:15:24 -08:00
omap2420.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
omap2430-clocks.dtsi
ARM: dts: omap2 clock data
2014-05-28 13:11:36 +03:00
omap2430-sdp.dts
ARM: dts: Add basic device tree support for omap2430 sdp
2013-11-25 15:15:23 -08:00
omap2430.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
omap3430-sdp.dts
Add craneboard devices
2014-03-02 14:22:03 -08:00
omap3430es1-clocks.dtsi
ARM: dts: fix omap3 dss clock handle names
2014-03-19 09:31:47 +02:00
omap4460.dtsi
ARM: dts: OMAP4: Add device nodes for ABB
2014-03-05 11:53:36 -08:00
omap-gpmc-smsc911x.dtsi
ARM: dts: Fix GPMC timings for LAN9220
2014-04-23 11:30:09 -07:00
omap-gpmc-smsc9221.dtsi
ARM: dts: omap: Add common file for SMSC9221
2014-03-12 10:18:16 -07:00
omap-zoom-common.dtsi
ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x
2013-11-15 14:33:26 -08:00
orion5x-lacie-d2-network.dts
ARM: orion5x: convert d2net to Device Tree
2014-04-26 19:45:24 +00:00
orion5x-lacie-ethernet-disk-mini-v2.dts
ARM: orion5x: keep TODO list in edmini_v2 DT
2014-04-26 19:45:19 +00:00
orion5x-maxtor-shared-storage-2.dts
ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree
2014-04-26 19:45:25 +00:00
orion5x-mv88f5182.dtsi
ARM: orion5x: add standard pinctrl configs for sata0 and sata1
2014-04-26 19:45:13 +00:00
orion5x-rd88f5182-nas.dts
ARM: orion5x: convert RD-88F5182 to Device Tree
2014-04-26 19:45:22 +00:00
orion5x.dtsi
ARM: orion5x: add Device Bus description at SoC level
2014-04-26 19:45:12 +00:00
phy3250.dts
picoxcell-pc3x2.dtsi
ARM: dts: picoxcell: cpus/cpu nodes dts updates
2013-05-23 10:45:15 +01:00
picoxcell-pc3x3.dtsi
ARM: dts: picoxcell: cpus/cpu nodes dts updates
2013-05-23 10:45:15 +01:00
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts
ARM: at91: dt: switch to pinctrl to pre-processor
2013-05-17 12:11:39 +02:00
prima2-evb.dts
prima2.dtsi
Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next
2014-06-05 15:57:04 -07:00
pxa2xx.dtsi
ARM: dts: pxa2xx: cpus/cpu nodes dts updates
2013-05-23 10:45:17 +01:00
pxa3xx.dtsi
ARM: pxa: DTS: override gpio node in pxa3xx.dtsi
2013-08-13 15:51:02 -07:00
pxa27x.dtsi
ARM: pxa: add PWM nodes to pxa27x.dtsi
2013-12-11 16:36:47 -08:00
pxa168-aspenite.dts
pxa168.dtsi
pxa910-dkb.dts
pxa910.dtsi
qcom-apq8064-ifc6410.dts
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees
2014-05-29 10:39:07 -05:00
qcom-apq8064-v2.0.dtsi
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees
2014-05-29 10:39:07 -05:00
qcom-apq8064.dtsi
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees
2014-05-29 10:39:07 -05:00
qcom-apq8074-dragonboard.dts
ARM: dts: qcom: Update msm8974/apq8074 device trees
2014-05-28 13:31:45 -05:00
qcom-apq8084-mtp.dts
ARM: dts: qcom: Add APQ8084-MTP board support
2014-05-29 11:16:45 -05:00
qcom-apq8084.dtsi
ARM: dts: qcom: Add APQ8084 SoC support
2014-05-29 11:16:33 -05:00
qcom-msm8660-surf.dts
ARM: dts: qcom: Update msm8660 device trees
2014-05-29 10:35:04 -05:00
qcom-msm8660.dtsi
ARM: dts: qcom: Update msm8660 device trees
2014-05-29 10:35:04 -05:00
qcom-msm8960-cdp.dts
ARM: dts: qcom: Update msm8960 device trees
2014-05-29 10:35:00 -05:00
qcom-msm8960.dtsi
ARM: dts: qcom: Update msm8960 device trees
2014-05-29 10:35:00 -05:00
qcom-msm8974.dtsi
ARM: dts: qcom: Update msm8974/apq8074 device trees
2014-05-28 13:31:45 -05:00
r7s72100-genmai.dts
ARM: shmobile: Sync Genmai DTS with Genmai reference DTS
2014-05-17 09:06:16 +09:00
r7s72100.dtsi
ARM: shmobile: r7s72100: add spi clocks to dtsi
2014-05-14 11:42:54 +09:00
r8a73a4-ape6evm-reference.dts
ARM: shmobile: Include all 2 GiB of memory on APE6EVM DT Ref
2013-12-10 17:27:17 +09:00
r8a73a4-ape6evm.dts
ARM: shmobile: Include all 2 GiB of memory on APE6EVM
2013-12-10 17:27:17 +09:00
r8a73a4.dtsi
ARM: shmobile: dts: Move interrupt-parent property to root node
2014-05-13 10:13:19 +09:00
r8a7740-armadillo800eva-reference.dts
ARM: shmobile: armadillo-reference dts: Add Ethernet support
2014-05-11 10:44:52 +09:00
r8a7740-armadillo800eva.dts
ARM: shmobile: Use #include in device tree sources
2013-12-10 17:27:06 +09:00
r8a7740.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
r8a7778-bockw-reference.dts
ARM: shmobile: bockw reference dts: Add SPI FLASH
2014-04-14 11:31:14 +09:00
r8a7778-bockw.dts
ARM: shmobile: Use #include in device tree sources
2013-12-10 17:27:06 +09:00
r8a7778.dtsi
ARM: shmobile: dts: Move interrupt-parent property to root node
2014-05-13 10:13:19 +09:00
r8a7779-marzen-reference.dts
ARM: shmobile: marzen-reference: Set SMSC lan to use irq-push-pull
2014-05-13 13:41:06 +09:00
r8a7779-marzen.dts
ARM: shmobile: Use #include in device tree sources
2013-12-10 17:27:06 +09:00
r8a7779.dtsi
ARM: shmobile: dts: Move interrupt-parent property to root node
2014-05-13 10:13:19 +09:00
r8a7790-lager.dts
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
r8a7790.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
r8a7791-henninger.dts
ARM: shmobile: henninger: add MSIOF0 DT support
2014-05-11 09:44:48 +09:00
r8a7791-koelsch.dts
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
r8a7791.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
rk3xxx.dtsi
ARM: dts: rockchip: convert pinctrl nodes to new bindings
2014-05-10 01:41:20 +02:00
rk3066a-bqcurie2.dts
ARM: dts: rockchip: add root compatible properties
2014-05-10 01:38:00 +02:00
rk3066a-clocks.dtsi
arm: Add basic clocks for Rockchip rk3066a SoCs
2013-06-21 09:20:56 +02:00
rk3066a.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
rk3188-clocks.dtsi
ARM: rockchip: add support for rk3188 and Radxa Rock board
2013-10-14 23:04:09 +02:00
rk3188-radxarock.dts
ARM: dts: rockchip: add root compatible properties
2014-05-10 01:38:00 +02:00
rk3188.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
s3c24xx.dtsi
ARM: dts: use #include for all device trees for Samsung
2013-06-19 03:28:40 +09:00
s3c64xx-pinctrl.dtsi
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
2013-09-17 06:48:28 +09:00
s3c64xx.dtsi
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
2013-09-17 06:48:28 +09:00
s3c2416-pinctrl.dtsi
ARM: dts: add devicetree support for s3c2416-smdk2416
2013-05-21 01:06:12 +09:00
s3c2416-smdk2416.dts
ARM: dts: add clock data for s3c2416
2014-04-15 02:11:08 +09:00
s3c2416.dtsi
ARM: dts: add clock data for s3c2416
2014-04-15 02:11:08 +09:00
s3c6400.dtsi
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
2013-09-17 06:48:28 +09:00
s3c6410-mini6410.dts
ARM: dts: Add dts file for S3C6410-based Mini6410 board
2013-09-17 06:48:29 +09:00
s3c6410-smdk6410.dts
ARM: dts: Add dts file for S3C6410-based SMDK6410 board
2013-09-17 06:48:29 +09:00
s3c6410.dtsi
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
2013-09-17 06:48:28 +09:00
sama5d3_can.dtsi
ARM: at91/dt: define sama5d3 clocks
2013-12-02 15:31:28 +01:00
sama5d3_emac.dtsi
ARM: at91/dt: define sama5d3 clocks
2013-12-02 15:31:28 +01:00
sama5d3_gmac.dtsi
ARM: at91/dt: define sama5d3 clocks
2013-12-02 15:31:28 +01:00
sama5d3_lcd.dtsi
ARM: at91/dt: define sama5d3 clocks
2013-12-02 15:31:28 +01:00
sama5d3_mci2.dtsi
dt-bindings: clock: Move at91.h to dt-bindigs/clock
2014-04-18 23:44:52 +02:00
sama5d3_tcb1.dtsi
dt-bindings: clock: Move at91.h to dt-bindigs/clock
2014-04-18 23:44:52 +02:00
sama5d3_uart.dtsi
dt-bindings: clock: Move at91.h to dt-bindigs/clock
2014-04-18 23:44:52 +02:00
sama5d3.dtsi
ARM: SoC updates for 3.16 (part 1)
2014-06-02 16:15:12 -07:00
sama5d3xcm.dtsi
ARM: at91/dt: add xtal frequencies to sama5d3xcm boards
2014-05-07 18:27:53 +02:00
sama5d3xdm.dtsi
ARM: at91/dt: sama5d3: remove useless adc properties
2014-03-12 19:11:29 +01:00
sama5d3xmb.dtsi
ARM: at91: sama5d3: clock for ssc from rk pin
2014-04-18 22:43:44 +02:00
sama5d31.dtsi
ARM: at91/dt: split sama5d3 peripheral definitions
2013-10-16 15:47:08 +02:00
sama5d31ek.dts
ARM: at91/dt: split sama5d3 peripheral definitions
2013-10-16 15:47:08 +02:00
sama5d33.dtsi
ARM: at91/dt: split sama5d3 peripheral definitions
2013-10-16 15:47:08 +02:00
sama5d33ek.dts
ARM: at91/dt: split sama5d3 peripheral definitions
2013-10-16 15:47:08 +02:00
sama5d34.dtsi
ARM: at91/dt: split sama5d3 peripheral definitions
2013-10-16 15:47:08 +02:00
sama5d34ek.dts
ARM: at91/dt: split sama5d3 peripheral definitions
2013-10-16 15:47:08 +02:00
sama5d35.dtsi
ARM: at91/dt: split sama5d3 peripheral definitions
2013-10-16 15:47:08 +02:00
sama5d35ek.dts
ARM: at91/dt: split sama5d3 peripheral definitions
2013-10-16 15:47:08 +02:00
sama5d36.dtsi
ARM: at91: fix network interface ordering for sama5d36
2014-03-11 12:49:10 -07:00
sama5d36ek.dts
ARM: at91: sama5d3/dt: add sama5d36ek dts files
2013-12-10 09:59:57 -08:00
samsung_k3pe0e000b.dtsi
sh73a0-kzm9g-reference.dts
ARM: shmobile: kzm9g-reference dts: Use KEY_* macros for gpio-keys
2014-04-14 11:31:15 +09:00
sh73a0-kzm9g.dts
ARM: shmobile: Use #include in device tree sources
2013-12-10 17:27:06 +09:00
sh73a0.dtsi
ARM: shmobile: sh73a0: drop address cells from GIC node
2014-04-15 07:37:57 +09:00
sh7372-mackerel.dts
ARM: shmobile: Use #include in device tree sources
2013-12-10 17:27:06 +09:00
sh7372.dtsi
ARM: shmobile: sh7372: Add pin control device to device tree
2013-07-22 10:12:36 +09:00
skeleton64.dtsi
ARM: dts: Fix memory node in skeleton64.dtsi
2013-08-07 16:33:50 +00:00
skeleton.dtsi
socfpga_arria5_socdk.dts
ARM: socfpga: dts: Add DTS entries for USB
2014-05-05 22:33:16 -05:00
socfpga_arria5.dtsi
ARM: socfpga: dts: Remove hard coded clock-frequency property
2014-05-05 22:33:15 -05:00
socfpga_cyclone5_socdk.dts
ARM: socfpga: dts: Add DTS entries for USB
2014-05-05 22:33:16 -05:00
socfpga_cyclone5_sockit.dts
ARM: socfpga: dts: Add DTS entries for USB
2014-05-05 22:33:16 -05:00
socfpga_cyclone5_socrates.dts
ARM: socfpga: dts: convert to preprocessor includes
2014-05-05 22:33:14 -05:00
socfpga_cyclone5.dtsi
ARM: socfpga: dts: Remove hard coded clock-frequency property
2014-05-05 22:33:15 -05:00
socfpga_vt.dts
ARM: socfpga: dts: convert to preprocessor includes
2014-05-05 22:33:14 -05:00
socfpga.dtsi
ARM: socfpga: dts: add watchdog0+1
2014-05-22 16:45:31 -05:00
spear3xx.dtsi
ARM: dts: spear: cpus/cpu nodes dts updates
2013-05-23 10:45:21 +01:00
spear13xx.dtsi
ARM: dts: spear: cpus/cpu nodes dts updates
2013-05-23 10:45:21 +01:00
spear300-evb.dts
spear300.dtsi
spear310-evb.dts
spear310.dtsi
spear320-evb.dts
spear320-hmi.dts
Shiraz has moved
2014-04-18 16:40:08 -07:00
spear320.dtsi
spear600-evb.dts
spear600.dtsi
ARM: dts: spear: cpus/cpu nodes dts updates
2013-05-23 10:45:21 +01:00
spear1310-evb.dts
spear1310.dtsi
spear1340-evb.dts
spear1340.dtsi
ARM: arm-soc: late cleanups
2013-05-07 11:22:14 -07:00
st-pincfg.h
ARM: STi: OF: Fix a typo in pincfg header
2013-12-04 08:58:39 +00:00
ste-ccu8540-pinctrl.dtsi
ARM: ux500: fix devicetree builds
2013-08-14 22:32:07 +02:00
ste-ccu8540.dts
arm: dts: Fix missing device_type="memory" for ste-ccu8540
2014-05-16 15:22:40 +01:00
ste-ccu9540.dts
ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
2014-05-12 12:52:40 +02:00
ste-dbx5x0.dtsi
ARM: ux500: switch SSP/SPI clock name to "SSPCLK"
2014-02-26 13:35:49 +01:00
ste-href-ab8500.dtsi
ARM: ux500: move AB8500 clock out pins to DT
2014-02-04 20:50:50 +01:00
ste-href-ab8505.dtsi
ARM: ux500: move last AB8505 set-up to DT
2014-02-04 20:50:55 +01:00
ste-href-family-pinctrl.dtsi
ARM: ux500: move the WLAN GPIO pin setup to the device tree
2013-11-26 21:01:56 +01:00
ste-href-stuib.dtsi
ARM: ux500: move GPIO key configuration to device tree
2013-11-26 21:01:56 +01:00
ste-href-tvk1281618.dtsi
ARM: ux500: move GPIO key configuration to device tree
2013-11-26 21:01:56 +01:00
ste-href.dtsi
ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href
2014-05-12 12:52:44 +02:00
ste-hrefprev60-stuib.dts
ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS
2013-10-03 10:29:24 +02:00
ste-hrefprev60-tvk.dts
ARM: ux500: split the HREF DTS files from two to four
2013-10-02 16:17:04 +02:00
ste-hrefprev60.dtsi
ARM: ux500: move AB8500 GPIOs to device tree
2014-02-04 20:46:50 +01:00
ste-hrefv60plus-stuib.dts
ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS
2013-10-03 10:29:24 +02:00
ste-hrefv60plus-tvk.dts
ARM: ux500: split the HREF DTS files from two to four
2013-10-02 16:17:04 +02:00
ste-hrefv60plus.dtsi
ARM: ux500: move AB8500 GPIOs to device tree
2014-02-04 20:46:50 +01:00
ste-nomadik-pinctrl.dtsi
ARM: ux500: move GPIO key configuration to device tree
2013-11-26 21:01:56 +01:00
ste-nomadik-s8815.dts
ARM: nomadik: get rid of explicit ethernet GPIO management
2013-11-28 21:08:42 +01:00
ste-nomadik-stn8815.dtsi
ARM: nomadik: Convert to the common mmc DT bindings for highspeed mode
2014-05-12 12:52:40 +02:00
ste-snowball.dts
ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
2014-05-12 12:52:40 +02:00
ste-u300.dts
ARM: u300: Convert to the common mmc DT bindings for highspeed mode
2014-05-12 12:52:41 +02:00
stih41x-b2000.dtsi
ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs
2014-05-21 14:27:14 +02:00
stih41x-b2020.dtsi
ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs
2014-05-21 14:27:14 +02:00
stih41x-b2020x.dtsi
ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
2014-03-27 02:01:25 +01:00
stih41x.dtsi
ARM: sti: stih41x: Provide a proper header for this DTSI file
2014-05-21 14:27:16 +02:00
stih407-b2120.dts
ARM: dts: STiH407: Add B2120 board support
2014-05-21 14:20:33 +02:00
stih407-clock.dtsi
ARM: dts: Add STiH407 SoC support
2014-05-21 14:20:27 +02:00
stih407-pinctrl.dtsi
ARM: dts: Add STiH407 SoC support
2014-05-21 14:20:27 +02:00
stih407.dtsi
ARM: dts: Add STiH407 SoC support
2014-05-21 14:20:27 +02:00
stih415-b2000.dts
ARM: dts: Fix STi boards compatibles
2014-05-21 14:20:23 +02:00
stih415-b2020.dts
ARM: dts: Fix STi boards compatibles
2014-05-21 14:20:23 +02:00
stih415-clock.dtsi
ARM: STi: DT: STiH415: 415 DT Entry for clockgen A9
2014-05-21 14:27:14 +02:00
stih415-pinctrl.dtsi
Merge tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt
2014-05-23 22:35:56 +02:00
stih415.dtsi
ARM: STi: DT: STiH415: 415 DT Entry for clockgen A0/1/10/11/12
2014-05-21 14:27:12 +02:00
stih416-b2000.dts
ARM: dts: Fix STi boards compatibles
2014-05-21 14:20:23 +02:00
stih416-b2020-revE.dts
ARM: sti: stih416: Enable board LED support for B2020 RevE
2014-05-21 14:27:16 +02:00
stih416-b2020.dts
ARM: dts: Fix STi boards compatibles
2014-05-21 14:20:23 +02:00
stih416-clock.dtsi
ARM: STi: DT: STiH416: 416 DT Entry for clockgen A9/DDR/GPU
2014-05-21 14:27:11 +02:00
stih416-pinctrl.dtsi
Merge tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt
2014-05-23 22:35:56 +02:00
stih416.dtsi
ARM: STi: DT: STiH416: 416 DT Entry for clockgen A0/1/10/11/12
2014-05-21 14:27:09 +02:00
sun4i-a10-a1000.dts
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
2014-05-11 19:07:00 +02:00
sun4i-a10-cubieboard.dts
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
2014-05-11 19:07:00 +02:00
sun4i-a10-hackberry.dts
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
2014-05-11 19:07:00 +02:00
sun4i-a10-inet97fv2.dts
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
2014-05-11 19:07:00 +02:00
sun4i-a10-mini-xplus.dts
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
2014-05-11 19:07:00 +02:00
sun4i-a10-olinuxino-lime.dts
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
2014-05-11 19:07:00 +02:00
sun4i-a10-pcduino.dts
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
2014-05-11 19:07:00 +02:00
sun4i-a10.dtsi
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
2014-06-06 12:26:57 -07:00
sun5i-a10s-olinuxino-micro.dts
ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes
2014-05-11 19:07:07 +02:00
sun5i-a10s-r7-tv-dongle.dts
ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board
2014-05-12 17:06:55 +02:00
sun5i-a10s.dtsi
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
2014-06-06 12:26:57 -07:00
sun5i-a13-olinuxino-micro.dts
ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes
2014-05-11 19:07:07 +02:00
sun5i-a13-olinuxino.dts
ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes
2014-05-11 19:07:07 +02:00
sun5i-a13.dtsi
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
2014-06-06 12:26:57 -07:00
sun6i-a31-app4-evb1.dts
ARM: sunxi: dt: add APP4-EVB1 board support
2014-05-14 14:30:05 +02:00
sun6i-a31-colombus.dts
ARM: sun6i: Add MMC0 controller to the Colombus board
2014-05-22 10:49:21 +02:00
sun6i-a31-m9.dts
ARM: dts: sun6i: Add reg_vcc3v3 to sun6i board mmc nodes
2014-05-11 19:07:10 +02:00
sun6i-a31.dtsi
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
2014-06-04 15:57:20 -07:00
sun7i-a20-cubieboard2.dts
ARM: dts: sun7i: Add reg_vcc3v3 to sun7i board mmc nodes
2014-05-11 19:07:22 +02:00
sun7i-a20-cubietruck.dts
ARM: dts: sun7i: cubietruck: set mmc3 bus-width property
2014-05-22 11:34:03 +02:00
sun7i-a20-i12-tvbox.dts
ARM: dts: sun7i: Add new i12-tvbox board
2014-05-22 11:35:07 +02:00
sun7i-a20-olinuxino-micro.dts
ARM: dts: sun7i: Add reg_vcc3v3 to sun7i board mmc nodes
2014-05-11 19:07:22 +02:00
sun7i-a20.dtsi
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
2014-06-06 12:26:57 -07:00
sunxi-common-regulators.dtsi
ARM: sunxi: Add fixed 3V regulator
2014-05-21 10:23:32 +02:00
tegra20-colibri-512.dtsi
ARM: SoC DT updates for 3.14
2014-01-23 18:45:38 -08:00
tegra20-harmony.dts
ARM: tegra: harmony - Add +5V HDMI supply
2014-04-28 09:57:39 -06:00
tegra20-iris-512.dts
ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines
2013-12-16 14:09:20 -07:00
tegra20-medcom-wide.dts
ARM: tegra: add missing unit addresses to DT
2013-12-16 14:09:16 -07:00
tegra20-paz00.dts
ARM: tegra: paz00: Add LVDS support to device tree
2014-02-05 09:47:22 -07:00
tegra20-plutux.dts
ARM: tegra: add missing unit addresses to DT
2013-12-16 14:09:16 -07:00
tegra20-seaboard.dts
ARM: tegra: enable LCD panel on Seaboard
2014-02-19 10:15:37 -07:00
tegra20-tamonten.dtsi
ARM: tegra: set up /aliases entries for RTCs
2013-12-18 14:10:48 -07:00
tegra20-tec.dts
ARM: tegra: add missing unit addresses to DT
2013-12-16 14:09:16 -07:00
tegra20-trimslice.dts
ARM: tegra: set up /aliases entries for RTCs
2013-12-18 14:10:48 -07:00
tegra20-ventana.dts
ARM: tegra: enable LCD panel on Ventana
2014-02-19 10:15:45 -07:00
tegra20-whistler.dts
ARM: tegra: set up /aliases entries for RTCs
2013-12-18 14:10:48 -07:00
tegra20.dtsi
ARM: tegra: device tree changes for 3.15
2014-03-20 14:40:56 -07:00
tegra30-beaver.dts
ARM: tegra: beaver - Add +5V HDMI supply
2014-04-28 09:57:40 -06:00
tegra30-cardhu-a02.dts
ARM: tegra: fix node sort order
2013-12-16 14:09:17 -07:00
tegra30-cardhu-a04.dts
ARM: tegra: fix node sort order
2013-12-16 14:09:17 -07:00
tegra30-cardhu.dtsi
ARM: tegra: device tree changes for 3.15
2014-03-20 14:40:56 -07:00
tegra30-colibri-eval-v3.dts
ARM: tegra: initial add of Colibri T30
2014-05-15 12:30:40 -06:00
tegra30-colibri.dtsi
ARM: tegra: initial add of Colibri T30
2014-05-15 12:30:40 -06:00
tegra30.dtsi
ARM: tegra: device tree changes for 3.15
2014-03-20 14:40:56 -07:00
tegra114-dalmore.dts
ARM: tegra: add SD wp-gpios to Dalmore DT
2014-04-29 10:09:54 -06:00
tegra114-roth.dts
ARM: tegra: add device tree for SHIELD
2014-05-12 10:37:57 -06:00
tegra114-tn7.dts
ARM: tegra: add Tegra Note 7 device tree
2014-05-02 12:17:11 -06:00
tegra114.dtsi
ARM: tegra: device tree changes for 3.15
2014-03-20 14:40:56 -07:00
tegra124-jetson-tk1.dts
ARM: tegra: add SD wp-gpios to Jetson TK1 DT
2014-04-29 10:09:51 -06:00
tegra124-venice2.dts
ARM: tegra: add SD wp-gpios to Venice2 DT
2014-05-06 11:03:20 -06:00
tegra124.dtsi
ARM: tegra: device tree changes for 3.16
2014-05-21 15:06:16 -07:00
tny_a9g20.dts
ARM: at91: dt: use #include for all device trees
2013-05-17 11:27:49 +02:00
tny_a9260_common.dtsi
tny_a9260.dts
ARM: at91: dt: use #include for all device trees
2013-05-17 11:27:49 +02:00
tny_a9263.dts
ARM: at91: dt: switch to standard GPIO flag defines.
2013-05-17 11:27:49 +02:00
tps6507x.dtsi
tps65217.dtsi
tps65910.dtsi
ARM: dts: tps65910 backup battery regulator
2014-02-28 13:52:25 -08:00
twl4030_omap3.dtsi
ARM: dts: Configure omap3 twl4030 I2C4 pins by default
2014-05-06 15:45:14 -07:00
twl4030.dtsi
ARM: dts: twl4030: Add madc
2014-05-06 10:19:49 -07:00
twl6030_omap4.dtsi
ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file
2013-10-08 17:51:41 +02:00
twl6030.dtsi
usb_a9g20_common.dtsi
ARM: at91: dt: add Calao USB-A9G20 low power version
2013-05-31 16:52:37 +02:00
usb_a9g20_lpw.dts
ARM: at91: dt: add Calao USB-A9G20 low power version
2013-05-31 16:52:37 +02:00
usb_a9g20-dab-mmx.dtsi
ARM: at91: dt: switch to standard GPIO flag defines.
2013-05-17 11:27:49 +02:00
usb_a9g20.dts
ARM: at91: dt: add Calao USB-A9G20 low power version
2013-05-31 16:52:37 +02:00
usb_a9260_common.dtsi
ARM: at91: dt: switch to standard GPIO flag defines.
2013-05-17 11:27:49 +02:00
usb_a9260.dts
ARM: at91: dt: usb-a9260: update shutdown controller
2013-05-31 16:52:35 +02:00
usb_a9263.dts
ARM: at91: dt: usb-a9263: add dataflash support
2013-05-31 16:52:36 +02:00
versatile-ab.dts
arm/versatile: Fix versatile irq specifications.
2013-10-28 16:50:11 -07:00
versatile-pb.dts
of: Move testcase FDT data into drivers/of
2014-02-20 11:52:08 +00:00
vexpress-v2m-rs1.dtsi
mfd: vexpress: Define the device as MFD cells
2014-05-15 17:02:19 +01:00
vexpress-v2m.dtsi
mfd: vexpress: Define the device as MFD cells
2014-05-15 17:02:19 +01:00
vexpress-v2p-ca5s.dts
dts: ca5: add the global timer for the A5
2014-04-22 11:44:26 +02:00
vexpress-v2p-ca9.dts
vexpress-v2p-ca15_a7.dts
mfd: vexpress: Convert custom func API to regmap
2014-05-15 17:02:18 +01:00
vexpress-v2p-ca15-tc1.dts
vf610-colibri.dts
ARM: dts: add initial Colibri VF61 board support
2014-05-16 23:01:49 +08:00
vf610-cosmic.dts
ARM: dts: vf610: make pinctrl nodes board specific
2014-02-09 21:32:28 +08:00
vf610-pinfunc.h
ARM: dts: add SoC level device tree source for VF610
2013-06-17 16:04:23 +08:00
vf610-twr.dts
ARM: dts: vf610-twr: Enables FTM PWM device.
2014-05-16 23:01:45 +08:00
vf610.dtsi
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
2014-06-04 15:57:20 -07:00
vt8500-bv07.dts
dts: vt8500: Update serial nodes and disable by default in SoC files
2013-05-12 20:31:13 +12:00
vt8500.dtsi
net: via-rhine: add OF bus binding
2014-04-23 15:24:06 -04:00
wm8505-ref.dts
dts: vt8500: Update serial nodes and disable by default in SoC files
2013-05-12 20:31:13 +12:00
wm8505.dtsi
dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files
2013-05-12 20:31:15 +12:00
wm8650-mid.dts
dts: vt8500: Update serial nodes and disable by default in SoC files
2013-05-12 20:31:13 +12:00
wm8650.dtsi
net: via-rhine: add OF bus binding
2014-04-23 15:24:06 -04:00
wm8750-apc8750.dts
dts: vt8500: Update serial nodes and disable by default in SoC files
2013-05-12 20:31:13 +12:00
wm8750.dtsi
dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files
2013-05-12 20:31:15 +12:00
wm8850-w70v2.dts
ARM: dts: Use the PWM polarity flags
2013-09-03 13:08:11 +02:00
wm8850.dtsi
net: via-rhine: add OF bus binding
2014-04-23 15:24:06 -04:00
xenvm-4.2.dts
zynq-7000.dtsi
ARM: SoC devicetree updates for 3.16
2014-06-02 16:34:00 -07:00
zynq-zc702.dts
ARM: zynq: dt: Add I2C nodes to Zynq device tree
2014-04-22 09:30:49 +02:00
zynq-zc706.dts
ARM: zynq: dt: Add I2C nodes to Zynq device tree
2014-04-22 09:30:49 +02:00
zynq-zed.dts
ARM: dts: zynq: Add SDHCI nodes
2014-01-31 14:58:56 -08:00