AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-25 22:10:49 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

ARM: at91: dt: switch to standard GPIO flag defines.

Browse Source 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
This commit is contained in:
Jean-Christophe PLAGNIOL-VILLARD 2013-04-24 08:34:25 +08:00 committed by Nicolas Ferre
parent 6db64d2978
commit 92f8629b60
33 changed files with 144 additions and 137 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
arch/arm/boot/dts/aks-cdu.dts
View File

@ -46,7 +46,7 @@ macb0: ethernet@fffc4000 {
};
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 15 0>;
atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
@ -90,23 +90,23 @@ leds {
compatible = "gpio-leds";
red {
gpios = <&pioC 10 0>;
gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
};
green {
gpios = <&pioA 5 1>;
gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
default-state = "on";
};
yellow {
gpios = <&pioB 20 1>;
gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
blue {
gpios = <&pioB 21 1>;
gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
};

16
arch/arm/boot/dts/animeo_ip.dts
View File

@ -123,7 +123,7 @@ root@2b0000 {
usb0: ohci@00500000 {
num-ports = <2>;
atmel,vbus-gpio = <&pioB 15 1>;
atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
status = "okay";
};
};
@ -133,23 +133,23 @@ leds {
power_green {
label = "power_green";
gpios = <&pioC 17 0>;
gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
power_red {
label = "power_red";
gpios = <&pioA 2 0>;
gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
};
tx_green {
label = "tx_green";
gpios = <&pioC 19 0>;
gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
};
tx_red {
label = "tx_red";
gpios = <&pioC 18 0>;
gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
};
};
@ -160,21 +160,21 @@ gpio_keys {
keyswitch_in {
label = "keyswitch_in";
gpios = <&pioB 1 0>;
gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
linux,code = <28>;
gpio-key,wakeup;
};
error_in {
label = "error_in";
gpios = <&pioB 2 0>;
gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
linux,code = <29>;
gpio-key,wakeup;
};
btn {
label = "btn";
gpios = <&pioC 23 0>;
gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
linux,code = <31>;
gpio-key,wakeup;
};

4
arch/arm/boot/dts/at91-ariag25.dts
View File

@ -156,7 +156,7 @@ leds {
/* little green LED in middle of Aria G25 module */
aria_led {
label = "aria_led";
gpios = <&pioB 8 0>; /* PB8 */
gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
linux,default-trigger = "heartbeat";
};
@ -164,7 +164,7 @@ aria_led {
onewire@0 {
compatible = "w1-gpio";
gpios = <&pioA 21 1>;
gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_w1_0>;
};

9
arch/arm/boot/dts/at91rm9200.dtsi
View File

@ -11,6 +11,7 @@
*/
#include "skeleton.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Atmel AT91RM9200 family SoC";
@ -503,9 +504,9 @@ nand0: nand@40000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
nand-ecc-mode = "soft";
gpios = <&pioC 2 0
gpios = <&pioC 2 GPIO_ACTIVE_HIGH
0
&pioB 1 0
&pioB 1 GPIO_ACTIVE_HIGH
>;
status = "disabled";
};
@ -520,8 +521,8 @@ usb0: ohci@00300000 {
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioA 25 0 /* sda */
&pioA 26 0 /* scl */
gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
&pioA 26 GPIO_ACTIVE_HIGH /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;

8
arch/arm/boot/dts/at91rm9200ek.dts
View File

@ -50,7 +50,7 @@ macb0: ethernet@fffbc000 {
};
usb1: gadget@fffb0000 {
atmel,vbus-gpio = <&pioD 4 0>;
atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
@ -66,19 +66,19 @@ leds {
ds2 {
label = "green";
gpios = <&pioB 0 0x1>;
gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0";
};
ds4 {
label = "yellow";
gpios = <&pioB 1 0x1>;
gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
ds6 {
label = "red";
gpios = <&pioB 2 0x1>;
gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
};
};
};

9
arch/arm/boot/dts/at91sam9260.dtsi
View File

@ -9,6 +9,7 @@
*/
#include "skeleton.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Atmel AT91SAM9260 family SoC";
@ -567,8 +568,8 @@ nand0: nand@40000000 {
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioC 13 0
&pioC 14 0
gpios = <&pioC 13 GPIO_ACTIVE_HIGH
&pioC 14 GPIO_ACTIVE_HIGH
0
>;
status = "disabled";
@ -584,8 +585,8 @@ usb0: ohci@00500000 {
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioA 23 0 /* sda */
&pioA 24 0 /* scl */
gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
&pioA 24 GPIO_ACTIVE_HIGH /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;

9
arch/arm/boot/dts/at91sam9263.dtsi
View File

@ -7,6 +7,7 @@
*/
#include "skeleton.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Atmel AT91SAM9263 family SoC";
@ -515,8 +516,8 @@ nand0: nand@40000000 {
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioA 22 0
&pioD 15 0
gpios = <&pioA 22 GPIO_ACTIVE_HIGH
&pioD 15 GPIO_ACTIVE_HIGH
0
>;
status = "disabled";
@ -532,8 +533,8 @@ usb0: ohci@00a00000 {
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioB 4 0 /* sda */
&pioB 5 0 /* scl */
gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
&pioB 5 GPIO_ACTIVE_HIGH /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;

18
arch/arm/boot/dts/at91sam9263ek.dts
View File

@ -51,7 +51,7 @@ macb0: ethernet@fffbc000 {
};
usb1: gadget@fff78000 {
atmel,vbus-gpio = <&pioA 25 0>;
atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@ -65,8 +65,8 @@ &pinctrl_mmc0_slot0_cmd_dat0
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioE 18 0>;
wp-gpios = <&pioE 19 0>;
cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
};
};
@ -141,8 +141,8 @@ data@7ca0000 {
usb0: ohci@00a00000 {
num-ports = <2>;
status = "okay";
atmel,vbus-gpio = <&pioA 24 0
&pioA 21 0
atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
&pioA 21 GPIO_ACTIVE_HIGH
>;
};
};
@ -152,13 +152,13 @@ leds {
d3 {
label = "d3";
gpios = <&pioB 7 0>;
gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
d2 {
label = "d2";
gpios = <&pioC 29 1>;
gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk";
};
};
@ -168,14 +168,14 @@ gpio_keys {
left_click {
label = "left_click";
gpios = <&pioC 5 1>;
gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
linux,code = <272>;
gpio-key,wakeup;
};
right_click {
label = "right_click";
gpios = <&pioC 4 1>;
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <273>;
gpio-key,wakeup;
};

4
arch/arm/boot/dts/at91sam9g20ek.dts
View File

@ -17,13 +17,13 @@ leds {
ds1 {
label = "ds1";
gpios = <&pioA 9 0>;
gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
ds5 {
label = "ds5";
gpios = <&pioA 6 1>;
gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
};
};
};

6
arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
View File

@ -23,7 +23,7 @@ &pinctrl_mmc0_slot0_cmd_dat0
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioC 2 0>;
cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
};
};
@ -43,13 +43,13 @@ leds {
ds1 {
label = "ds1";
gpios = <&pioB 9 0>;
gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
ds5 {
label = "ds5";
gpios = <&pioB 8 1>;
gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
};
};
};

8
arch/arm/boot/dts/at91sam9g20ek_common.dtsi
View File

@ -65,7 +65,7 @@ macb0: ethernet@fffc4000 {
};
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 0>;
atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@ -79,7 +79,7 @@ &pinctrl_mmc0_slot1_cmd_dat0
slot@1 {
reg = <1>;
bus-width = <4>;
cd-gpios = <&pioC 9 0>;
cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
};
};
@ -180,14 +180,14 @@ gpio_keys {
btn3 {
label = "Button 3";
gpios = <&pioA 30 1>;
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
gpio-key,wakeup;
};
btn4 {
label = "Button 4";
gpios = <&pioA 31 1>;
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
gpio-key,wakeup;
};

9
arch/arm/boot/dts/at91sam9g45.dtsi
View File

@ -10,6 +10,7 @@
*/
#include "skeleton.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Atmel AT91SAM9G45 family SoC";
@ -592,8 +593,8 @@ nand0: nand@40000000 {
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioC 8 0
&pioC 14 0
gpios = <&pioC 8 GPIO_ACTIVE_HIGH
&pioC 14 GPIO_ACTIVE_HIGH
0
>;
status = "disabled";
@ -616,8 +617,8 @@ usb1: ehci@00800000 {
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioA 20 0 /* sda */
&pioA 21 0 /* scl */
gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
&pioA 21 GPIO_ACTIVE_HIGH /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;

30
arch/arm/boot/dts/at91sam9m10g45ek.dts
View File

@ -68,7 +68,7 @@ &pinctrl_mmc0_slot0_clk_cmd_dat0
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 10 0>;
cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
};
};
@ -81,8 +81,8 @@ &pinctrl_mmc1_slot0_clk_cmd_dat0
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 11 0>;
wp-gpios = <&pioD 29 0>;
cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
};
};
@ -139,8 +139,8 @@ data@4000000 {
usb0: ohci@00700000 {
status = "okay";
num-ports = <2>;
atmel,vbus-gpio = <&pioD 1 1
&pioD 3 1>;
atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
&pioD 3 GPIO_ACTIVE_LOW>;
};
usb1: ehci@00800000 {
@ -153,19 +153,19 @@ leds {
d8 {
label = "d8";
gpios = <&pioD 30 0>;
gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
d6 {
label = "d6";
gpios = <&pioD 0 1>;
gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk";
};
d7 {
label = "d7";
gpios = <&pioD 31 1>;
gpios = <&pioD 31 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0";
};
};
@ -175,45 +175,45 @@ gpio_keys {
left_click {
label = "left_click";
gpios = <&pioB 6 1>;
gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
linux,code = <272>;
gpio-key,wakeup;
};
right_click {
label = "right_click";
gpios = <&pioB 7 1>;
gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
linux,code = <273>;
gpio-key,wakeup;
};
left {
label = "Joystick Left";
gpios = <&pioB 14 1>;
gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
linux,code = <105>;
};
right {
label = "Joystick Right";
gpios = <&pioB 15 1>;
gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
linux,code = <106>;
};
up {
label = "Joystick Up";
gpios = <&pioB 16 1>;
gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
linux,code = <103>;
};
down {
label = "Joystick Down";
gpios = <&pioB 17 1>;
gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
linux,code = <108>;
};
enter {
label = "Joystick Press";
gpios = <&pioB 18 1>;
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
linux,code = <28>;
};
};

9
arch/arm/boot/dts/at91sam9n12.dtsi
View File

@ -8,6 +8,7 @@
*/
#include "skeleton.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Atmel AT91SAM9N12 SoC";
@ -438,8 +439,8 @@ nand0: nand@40000000 {
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioD 5 0
&pioD 4 0
gpios = <&pioD 5 GPIO_ACTIVE_HIGH
&pioD 4 GPIO_ACTIVE_HIGH
0
>;
status = "disabled";
@ -455,8 +456,8 @@ usb0: ohci@00500000 {
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioA 30 0 /* sda */
&pioA 31 0 /* scl */
gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
&pioA 31 GPIO_ACTIVE_HIGH /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;

10
arch/arm/boot/dts/at91sam9n12ek.dts
View File

@ -55,7 +55,7 @@ &pinctrl_mmc0_slot0_clk_cmd_dat0
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioA 7 0>;
cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
};
};
@ -95,19 +95,19 @@ leds {
d8 {
label = "d8";
gpios = <&pioB 4 1>;
gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0";
};
d9 {
label = "d6";
gpios = <&pioB 5 1>;
gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk";
};
d10 {
label = "d7";
gpios = <&pioB 6 0>;
gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
@ -117,7 +117,7 @@ gpio_keys {
enter {
label = "Enter";
gpios = <&pioB 4 1>;
gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
linux,code = <28>;
gpio-key,wakeup;
};

17
arch/arm/boot/dts/at91sam9x5.dtsi
View File

@ -10,6 +10,7 @@
*/
#include "skeleton.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Atmel AT91SAM9x5 family SoC";
@ -664,8 +665,8 @@ nand0: nand@40000000 {
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioD 5 0
&pioD 4 0
gpios = <&pioD 5 GPIO_ACTIVE_HIGH
&pioD 4 GPIO_ACTIVE_HIGH
0
>;
status = "disabled";
@ -688,8 +689,8 @@ usb1: ehci@00700000 {
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioA 30 0 /* sda */
&pioA 31 0 /* scl */
gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
&pioA 31 GPIO_ACTIVE_HIGH /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
@ -703,8 +704,8 @@ &pioA 31 0 /* scl */
i2c@1 {
compatible = "i2c-gpio";
gpios = <&pioC 0 0 /* sda */
&pioC 1 0 /* scl */
gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
&pioC 1 GPIO_ACTIVE_HIGH /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
@ -718,8 +719,8 @@ &pioC 1 0 /* scl */
i2c@2 {
compatible = "i2c-gpio";
gpios = <&pioB 4 0 /* sda */
&pioB 5 0 /* scl */
gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
&pioB 5 GPIO_ACTIVE_HIGH /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;

6
arch/arm/boot/dts/at91sam9x5cm.dtsi
View File

@ -75,19 +75,19 @@ leds {
pb18 {
label = "pb18";
gpios = <&pioB 18 1>;
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
pd21 {
label = "pd21";
gpios = <&pioD 21 0>;
gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
};
};
1wire_cm {
compatible = "w1-gpio";
gpios = <&pioB 18 0>;
gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
linux,open-drain;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_1wire_cm>;

8
arch/arm/boot/dts/at91sam9x5ek.dtsi
View File

@ -27,7 +27,7 @@ &pinctrl_mmc0_slot0_clk_cmd_dat0
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 15 0>;
cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
};
};
@ -40,7 +40,7 @@ &pinctrl_mmc1_slot0_clk_cmd_dat0
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 14 0>;
cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
};
};
@ -86,8 +86,8 @@ m25p80@0 {
usb0: ohci@00600000 {
status = "okay";
num-ports = <2>;
atmel,vbus-gpio = <&pioD 19 1
&pioD 20 1
atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW
&pioD 20 GPIO_ACTIVE_LOW
>;
};

4
arch/arm/boot/dts/ethernut5.dts
View File

@ -40,7 +40,7 @@ macb0: ethernet@fffc4000 {
};
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 0>;
atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
@ -52,7 +52,7 @@ nand0: nand@40000000 {
status = "okay";
gpios = <0
&pioC 14 0
&pioC 14 GPIO_ACTIVE_HIGH
0
>;

2
arch/arm/boot/dts/evk-pro3.dts
View File

@ -31,7 +31,7 @@ usart2: serial@fffb8000 {
};
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 0>;
atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};

12
arch/arm/boot/dts/kizbox.dts
View File

@ -94,26 +94,26 @@ leds {
led1g {
label = "led1:green";
gpios = <&pioB 0 1>;
gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
led1r {
label = "led1:red";
gpios = <&pioB 1 1>;
gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
led2g {
label = "led2:green";
gpios = <&pioB 2 1>;
gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
default-state = "on";
};
led2r {
label = "led2:red";
gpios = <&pioB 3 1>;
gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
};
@ -125,14 +125,14 @@ gpio_keys {
reset {
label = "reset";
gpios = <&pioB 30 1>;
gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
gpio-key,wakeup;
};
mode {
label = "mode";
gpios = <&pioB 31 1>;
gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
linux,code = <0x101>;
gpio-key,wakeup;
};

2
arch/arm/boot/dts/mpa1600.dts
View File

@ -62,7 +62,7 @@ gpio_keys {
monitor_mute {
label = "Monitor mute";
gpios = <&pioC 1 1>;
gpios = <&pioC 1 GPIO_ACTIVE_LOW>;
linux,code = <113>;
};
};

14
arch/arm/boot/dts/pm9g45.dts
View File

@ -64,7 +64,7 @@ &pinctrl_mmc0_slot0_clk_cmd_dat0
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 6 0>;
cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>;
};
};
@ -81,8 +81,8 @@ nand0: nand@40000000 {
nand-on-flash-bbt;
pinctrl-0 = <&pinctrl_board_nand>;
gpios = <&pioD 3 0
&pioC 14 0
gpios = <&pioD 3 GPIO_ACTIVE_HIGH
&pioC 14 GPIO_ACTIVE_HIGH
0
>;
@ -134,13 +134,13 @@ leds {
led0 {
label = "led0";
gpios = <&pioD 0 1>;
gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk";
};
led1 {
label = "led1";
gpios = <&pioD 31 0>;
gpios = <&pioD 31 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
@ -152,13 +152,13 @@ gpio_keys {
right {
label = "SW4";
gpios = <&pioE 7 1>;
gpios = <&pioE 7 GPIO_ACTIVE_LOW>;
linux,code = <106>;
};
up {
label = "SW3";
gpios = <&pioE 8 1>;
gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
linux,code = <103>;
};
};

1
arch/arm/boot/dts/sama5d3.dtsi
View File

@ -9,6 +9,7 @@
*/
#include "skeleton.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Atmel SAMA5D3 family SoC";

2
arch/arm/boot/dts/sama5d31ek.dts
View File

@ -41,7 +41,7 @@ macb1: ethernet@f802c000 {
leds {
d3 {
label = "d3";
gpios = <&pioE 24 0>;
gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
};
};

2
arch/arm/boot/dts/sama5d34ek.dts
View File

@ -51,7 +51,7 @@ macb0: ethernet@f0028000 {
leds {
d3 {
label = "d3";
gpios = <&pioE 24 0>;
gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
};
};

2
arch/arm/boot/dts/sama5d35ek.dts
View File

@ -48,7 +48,7 @@ gpio_keys {
pb_user1 {
label = "pb_user1";
gpios = <&pioE 27 0>;
gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
gpio-key,wakeup;
};

2
arch/arm/boot/dts/sama5d3xcm.dtsi
View File

@ -85,7 +85,7 @@ leds {
d2 {
label = "d2";
gpios = <&pioE 25 1>; /* PE25, conflicts with A25, RXD2 */
gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */
};
};
};

12
arch/arm/boot/dts/sama5d3xmb.dtsi
View File

@ -20,7 +20,7 @@ mmc0: mmc@f0000000 {
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 17 0>;
cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
};
};
@ -62,7 +62,7 @@ mmc1: mmc@f8000000 {
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 18 0>;
cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
};
};
@ -127,7 +127,7 @@ watchdog@fffffe40 {
};
usb0: gadget@00500000 {
atmel,vbus-gpio = <&pioD 29 0>;
atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
@ -135,9 +135,9 @@ usb0: gadget@00500000 {
usb1: ohci@00600000 {
num-ports = <3>;
atmel,vbus-gpio = <&pioD 25 0
&pioD 26 1
&pioD 27 1
atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
&pioD 26 GPIO_ACTIVE_LOW
&pioD 27 GPIO_ACTIVE_LOW
>;
status = "okay";
};

2
arch/arm/boot/dts/tny_a9263.dts
View File

@ -38,7 +38,7 @@ dbgu: serial@ffffee00 {
};
usb1: gadget@fff78000 {
atmel,vbus-gpio = <&pioB 11 0>;
atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};

6
arch/arm/boot/dts/usb_a9260_common.dtsi
View File

@ -30,7 +30,7 @@ macb0: ethernet@fffc4000 {
};
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 0>;
atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
@ -93,7 +93,7 @@ leds {
user_led {
label = "user_led";
gpios = <&pioB 21 1>;
gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
@ -105,7 +105,7 @@ gpio_keys {
user_pb {
label = "user_pb";
gpios = <&pioB 10 1>;
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
gpio-key,wakeup;
};

6
arch/arm/boot/dts/usb_a9263.dts
View File

@ -43,7 +43,7 @@ macb0: ethernet@fffbc000 {
};
usb1: gadget@fff78000 {
atmel,vbus-gpio = <&pioB 11 0>;
atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@ -107,7 +107,7 @@ leds {
user_led {
label = "user_led";
gpios = <&pioB 21 0>;
gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
@ -119,7 +119,7 @@ gpio_keys {
user_pb {
label = "user_pb";
gpios = <&pioB 10 1>;
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
gpio-key,wakeup;
};

22
arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
View File

@ -28,39 +28,39 @@ leds {
user_led1 {
label = "user_led1";
gpios = <&pioB 20 1>;
gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
};
/*
* led already used by mother board but active as high
* user_led2 {
* label = "user_led2";
* gpios = <&pioB 21 1>;
* gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
* };
*/
user_led3 {
label = "user_led3";
gpios = <&pioB 22 1>;
gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
};
user_led4 {
label = "user_led4";
gpios = <&pioB 23 1>;
gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
};
red {
label = "red";
gpios = <&pioB 24 1>;
gpios = <&pioB 24 GPIO_ACTIVE_LOW>;
};
orange {
label = "orange";
gpios = <&pioB 30 1>;
gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
};
green {
label = "green";
gpios = <&pioB 31 1>;
gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
};
};
@ -71,25 +71,25 @@ gpio_keys {
user_pb1 {
label = "user_pb1";
gpios = <&pioB 25 1>;
gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
};
user_pb2 {
label = "user_pb2";
gpios = <&pioB 13 1>;
gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
linux,code = <0x101>;
};
user_pb3 {
label = "user_pb3";
gpios = <&pioA 26 1>;
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
};
user_pb4 {
label = "user_pb4";
gpios = <&pioC 9 1>;
gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
};
};