AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-23 09:48:39 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
792f98677d
linux_dsm_epyc7002/arch/arm/boot/dts/Makefile

1187 lines
30 KiB
Makefile
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
# SPDX-License-Identifier: GPL-2.0
ARM: dts: Alpine platform devicetree This patch introduces devicetree for the Alpine platform, and for a development board based on the same platform. Signed-off-by: Barak Wasserstrom <barak@annapurnalabs.com> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-12 18:53:12 +07:00
dtb-$(CONFIG_ARCH_ALPINE) += \
ARM: dts: fix typo in makefile for alpine-db File uses dash in the filename, not underscore. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-02 07:05:54 +07:00
alpine-db.dtb
ARM: dts: artpec: add Artpec-6 development board dts Signed-off-by: Lars Persson <larper@axis.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-11 23:06:18 +07:00
dtb-$(CONFIG_MACH_ARTPEC6) += \
artpec6-devboard.dtb
ARM: dts: move alphascale in makefile The file is roughly sorted alphabetically (with some exceptions where old options have been split in two), so alphascale should go at the top instead of at the bottom. Also linewrap like other entries have been lately. Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-20 07:32:42 +07:00
dtb-$(CONFIG_MACH_ASM9260) += \
alphascale-asm9260-devkit.dtb
arm: at91: dt: at91sam9 add serial pinctrl support Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-07-05 15:56:09 +07:00
# Keep at91 dtb files sorted alphabetically for each SoC
ARM: dts: at91: Don't build unnecessary dtbs Building both ARMv4 and ARMv5 dtbs when SOC_SAM_V4_V5 is an issue for kernelci because it will then attempt to boot ARMv4 kernels on at91sam9 which doesn't work. Use CONFIG_SOC_AT91RM9200 and CONFIG_SOC_AT91SAM9 instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-08 16:45:19 +07:00
dtb-$(CONFIG_SOC_AT91RM9200) += \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
at91rm9200ek.dtb \
ARM: dts: at91: Don't build unnecessary dtbs Building both ARMv4 and ARMv5 dtbs when SOC_SAM_V4_V5 is an issue for kernelci because it will then attempt to boot ARMv4 kernels on at91sam9 which doesn't work. Use CONFIG_SOC_AT91RM9200 and CONFIG_SOC_AT91SAM9 instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-08 16:45:19 +07:00
mpa1600.dtb
dtb-$(CONFIG_SOC_AT91SAM9) += \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
animeo_ip.dtb \
at91-qil_a9260.dtb \
aks-cdu.dtb \
ethernut5.dtb \
evk-pro3.dtb \
tny_a9260.dtb \
usb_a9260.dtb \
ARM: dts: at91: add at91sam9260ek board DT Add Device Tree source file for at91sam9260ek board. This official Atmel Evaluation Kit is designed around a SoC based on a ARM 926 core the at91sam9260. The board is also added to the dts Makefile. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-05-19 19:54:22 +07:00
at91sam9260ek.dtb \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
at91sam9261ek.dtb \
at91sam9263ek.dtb \
ARM: dts: at91: Add DT support for Olimex SAM9-L9260 board. sam9-l9260 is a low cost board designed by Olimex. More information is available at: https://www.olimex.com/Products/ARM/Atmel/SAM9-L9260/ Signed-off-by: Raashid Muhammed <raashidmuhammed@zilogic.com> Reviewed-by: Vijay Kumar B. <vijaykumar@bravegnu.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-03 13:15:39 +07:00
at91-sam9_l9260.dtb \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
tny_a9263.dtb \
usb_a9263.dtb \
at91-foxg20.dtb \
ARM: at91/dt: kizbox: rename to at91-kizbox Rename to match AT91 naming convention. Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-30 14:33:32 +07:00
at91-kizbox.dtb \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
at91sam9g20ek.dtb \
at91sam9g20ek_2mmc.dtb \
tny_a9g20.dtb \
usb_a9g20.dtb \
usb_a9g20_lpw.dtb \
at91sam9m10g45ek.dtb \
pm9g45.dtb \
at91sam9n12ek.dtb \
at91sam9rlek.dtb \
at91-ariag25.dtb \
ARM: at91/dt: Add Acme Arietta G25 Add a minimum Device Tree for Acme Arietta G25. http://acme.systems/arietta Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Sergio Tanzilli <tanzilli@acmesystems.it> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-06-03 19:24:18 +07:00
at91-ariettag25.dtb \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
at91-cosino_mega2560.dtb \
ARM: at91/dt: add support for kizboxmini Add DT file for Kizbox mini board. This board is based on Atmel's AT91SAM9G25 SoC. Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-05-04 22:59:07 +07:00
at91-kizboxmini.dtb \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
at91sam9g15ek.dtb \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
ARM: at91/dt: add support for kizbox2 Add DT file for Kizbox 2 board. This board is based on Atmel's SAMA5D31 Cortex-A5 SoC. Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-05-04 22:59:57 +07:00
at91-kizbox2.dtb \
ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power The Axentia Nattis is a device designed for presenting departures for public transport systems. The Natte helper board provides power and features a battery of battery chargers. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-04 20:57:08 +07:00
at91-nattis-2-natte-2.dtb \
ARM: dts: at91: at91-sama5d27_som1_ek: Add sama5d27 SoM1 EK support Add specifig DTS files and bindings for sama5d27 SoM1 EK board. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06 15:35:29 +07:00
at91-sama5d27_som1_ek.dtb \
ARM: dts: at91: introduce the sama5d2 ptc ek board Add the official SAMA5D2 Peripheral Touch Controller Evaluation Kit board. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-07 15:24:53 +07:00
at91-sama5d2_ptc_ek.dtb \
ARM: at91/dt: add minimal sama5d2 Xplained board Add minimal support for the new sama5d2 Xplained board. Only USB, spi/i2c, ethernet and uart/usart peripherals added. With this DTS file you can boot the board and begin to play with it. Rootfs on NFS and sd card have successfully been tested. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-18 19:55:03 +07:00
at91-sama5d2_xplained.dtb \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
at91-sama5d3_xplained.dtb \
ARM: dts: at91: add devicetree for the Axentia TSE-850 The Axentia TSE-850 is a SAMA5D3-based device designed to generate FM subcarrier signals. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10 20:18:33 +07:00
at91-tse850-3.dtb \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
sama5d31ek.dtb \
sama5d33ek.dtb \
sama5d34ek.dtb \
sama5d35ek.dtb \
sama5d36ek.dtb \
ARM: dts: at91: add dts file for sama5d36ek CMP board The sama5d36ek CMP board is the variant of sama5d3xek board. It is equipped with the low-power DDR2 SDRAM, PMIC ACT8865 and some power rail. Its main purpose is used to measure the power consumption. The difference of the sama5d36ek CMP dts from sama5d36ek dts is listed as below. 1. The USB host nodes are removed, that is, the USB host is disabled. 2. The gpio_keys node is added to wake up from the sleep. 3. The LCD isn't supported due to the pins for LCD are conflicted with gpio_keys. 4. The adc0 node support the pinctrl sleep state to fix the over consumption on VDDANA. As said in errata, "When the USB host ports are used in high speed mode (EHCI), it is not possible to suspend the ports if no device is attached on each port. This leads to increased power consumption even if the system is in a low power mode." That is why the the USB host is disabled. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-21 12:14:42 +07:00
sama5d36ek_cmp.dtb \
ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVK Add support for the DENX MA5D4 SoM and MA5D4EVK board. The system consists of a SoM with eMMC, SPI NOR for booting, 2x SPI CAN chip and an EVK with microSD slot, 2x UART, 2x CAN port, 3x USB port, LEDs and expansion headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-11-05 05:14:24 +07:00
at91-sama5d4_ma5d4evk.dtb \
ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board Add at91 sama5d4 xplained board support. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 09:51:48 +07:00
at91-sama5d4_xplained.dtb \
ARM: at91/dt: Add Support for the L+G VInCo platform The Versatile Industrial Communication platform is a community oriented board from Landis + Gyr. It comes with: - an RS-485 port - 2 Ethernet ports - a wireless M-BUS - a 4G modem - a 4MB SPI flash - a 4GB eMMC Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-17 17:19:19 +07:00
at91-sama5d4ek.dtb \
at91-vinco.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_ATLAS6) += \
atlas6-evb.dtb
drop Marco and add init dts stuff for Atlas7 CSR Marco SoC has never shipped to customers that could be interested in mainline support. and new Atlas7 is a replacement SoC that is in development. so we drop Marco dts stuff, and add dts stuff for Atlas7. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJUtmPZAAoJEDIv4aC191Rh3ZEQAI0kUJqgUAK8te3zHnQ0rUBp zawNk6N5D6KIFEue3hNDE6XlBhhKz8o5Npr7Wlp3WDRlA9gvSn0BYd5iQhRQjg3F hXRLPpK47pUPlq0RMLFNiYO4EwNQlA6ANBDe1sAUDWPiDplfkF0w5WXW8ZvPk3FL YXbumzH6JOrCzyMijOXKfJEtN/8qkgbm8mEQxwiuwLzzfmsuryOTbJbSvv8ogP4K hZEnfAP6MfR9Kk87a1XKMgs3DMuaWou6RXh6Vah4z0OlvtWLOmAy/j0tXs0Qe8Eh Kcms+zHHrmT9QyT82x/FK3ZCj0Q+HuI9mf3Gf54DKfYh9zMhjZH/y3ORFxHMiQFi ycSVO/LuLEB9J2X/3UDmnsl2YVds7v9Bf+8ZkMTprA1MKEpxWnZDIEH7cX5e192+ pgVBh7N9dbeLxgH6i6VtRXSRtjNqE+893o4qKYGagvzJhQ0XO5Dk1Em+LrkJIQeh pdpmgpKCWfT5RPJLpdUC93TUvpex+LlcCC5Obk107aEjGDeZCqJDYMl6J3YQdVIC 2oY5+hAmq5rxQ3D4KrXoSLmFr9pXQSNEav18dM00LZMnpoQlC/2EiuIsCv/b45EF w31fW0CM0C8kXDabkQjZOTcItz+nkJCb1KLvhm20Zcir2g9zM9iqW8QVcg6BYm10 KC+gpZpQvAszle4KW+v0 =wbyB -----END PGP SIGNATURE----- Merge tag 'atlas7-init-dts-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/dt Merge "CSR atlas7 init dts for 3.20" from Barry Song: Drop Marco and add init dts stuff for Atlas7 CSR Marco SoC has never shipped to customers that could be interested in mainline support. and new Atlas7 is a replacement SoC that is in development. So we drop Marco dts stuff, and add dts stuff for Atlas7. * tag 'atlas7-init-dts-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: ARM: dts: add init dts file for CSR atlas7 SoC ARM: dts: drop MARCO platform DT stuff Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-20 01:57:35 +07:00
dtb-$(CONFIG_ARCH_ATLAS7) += \
atlas7-evb.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_AXXIA) += \
axm5516-amarillo.dtb
dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-b.dtb \
ARM: bcm2835: dt: Add Raspberry Pi Model A This one is essentially the same as revision 2 B board (with the I2S on P5 header). Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Stephen Warren <swarren@wwwdotorg.org> [anholt: Rebased on bcm2835.dtsi -> bcm283x.dtsi change] Signed-off-by: Eric Anholt <eric@anholt.net>
2016-01-26 03:40:06 +07:00
bcm2835-rpi-a.dtb \
ARM: bcm2835: dt: Add Raspberry Pi Model B rev2 This one has an extra P5 header (unpopulated) with I2S. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Eric Anholt <eric@anholt.net>
2015-10-12 02:37:16 +07:00
bcm2835-rpi-b-rev2.dtb \
ARM: bcm2835: dt: Add Raspberry Pi Model A+ Essentially the same as B+. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Eric Anholt <eric@anholt.net>
2015-10-12 02:37:17 +07:00
bcm2835-rpi-b-plus.dtb \
ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B The Pi 2 B ends up like a Pi 1 B+, with the same peripherals and pinout, but the CPU and memory layout changed to use the 2836. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-04-17 05:26:45 +07:00
bcm2835-rpi-a-plus.dtb \
ARM: dts: bcm2835: Add Raspberry Pi Zero The Raspberry Pi Zero is a minified version of model A+. It's notable there is no PWR LED and the ACT LED is inverted. Additionally the Pi Zero is capable of the USB peripheral mode. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-08-21 22:10:03 +07:00
bcm2836-rpi-2-b.dtb \
ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6) Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for now, so it's useful to be able to test that mode on an upstream kernel. It's also been useful for me to use the same board for 32-bit and 64-bit development. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Olof Johansson <olof@lixom.net>
2017-04-25 23:45:08 +07:00
bcm2837-rpi-3-b.dtb \
ARM: dts: bcm2837: Add Raspberry Pi 3 B+ The Raspberry Pi 3 B+ has the following major differences compared to the model 3 B: * Microchip LAN7515 (Gigabit Ethernet with integrated USB 2.0 HUB) * Cypress CYW43455 (802.11n/ac and BT 4.2) We need to add the USB LAN chip so the bootloader can add the MAC address. This is necessary because there ain't an EEPROM or a valid OTP. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-04-21 18:28:37 +07:00
bcm2837-rpi-3-b-plus.dtb \
ARM: dts: bcm2835: Add Raspberry Pi Zero W The Raspberry Pi Zero W has the same components like the Zero plus a Cypress CYW43438 wireless chip (wifi + bl). Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2017-07-31 00:10:34 +07:00
bcm2835-rpi-zero.dtb \
bcm2835-rpi-zero-w.dtb
ARM: BCM5301X: Add DT for Netgear R6300 V2 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2014-12-04 16:22:02 +07:00
dtb-$(CONFIG_ARCH_BCM_5301X) += \
ARM: BCM5301X: Add DT for Asus RT-AC56U Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-31 22:29:18 +07:00
bcm4708-asus-rt-ac56u.dtb \
ARM: BCM5301X: Add DT for Asus RT-AC68U Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-28 21:01:38 +07:00
bcm4708-asus-rt-ac68u.dtb \
ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2014-12-04 16:22:58 +07:00
bcm4708-buffalo-wzr-1750dhp.dtb \
ARM: dts: BCM5301X: Add basic DT for Linksys EA6300 V1 It's wireless home router based on BCM4708A0 with BCM4360 + BCM43217 wireless chipsets. LEDs will be hopefully added later to the DT. According to some sources it may use the same board as EA6400 and just differ by an original vendor firmware. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-25 16:44:17 +07:00
bcm4708-linksys-ea6300-v1.dtb \
ARM: BCM5301X: Add DT for Luxul XAP-1510 Luxul XAP-1510 is an AP device based on BCM4708 SoC with 2 x BCM4360 chipsets on PCB connected using PCIe. Signed-off-by: Dan Haab <dhaab@luxul.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-09-28 00:27:10 +07:00
bcm4708-luxul-xap-1510.dtb \
ARM: BCM5301X: Add DT for Luxul XWC-1000 Luxul XWC-1000 is a controller device based on BCM4708 SoC. The only unusual thing in its DTS file is "ubi" partition on NAND flash. Signed-off-by: Dan Haab <dhaab@luxul.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2015-01-20 02:45:37 +07:00
bcm4708-luxul-xwc-1000.dtb \
ARM: BCM5301X: Add DT for Netgear R6300 V2 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2014-12-04 16:22:02 +07:00
bcm4708-netgear-r6250.dtb \
ARM: BCM5301X: Add DT for Asus RT-N18U Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2014-12-04 16:23:33 +07:00
bcm4708-netgear-r6300-v2.dtb \
ARM: BCM5301X: Add DT for SmartRG SR400ac Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-05-13 14:10:53 +07:00
bcm4708-smartrg-sr400ac.dtb \
ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2014-12-04 16:24:02 +07:00
bcm47081-asus-rt-n18u.dtb \
ARM: BCM5301X: Add DT for Buffalo WZR-900DHP Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2015-01-21 04:42:16 +07:00
bcm47081-buffalo-wzr-600dhp2.dtb \
ARM: BCM5301X: Add DT for Netgear R8000 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reported-by: Ian Kent <raven@themaw.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-02-18 18:25:42 +07:00
bcm47081-buffalo-wzr-900dhp.dtb \
ARM: dts: BCM5301X: Add DT for Luxul XAP-1410 Luxul XAP-1410 in a dual-band access point device based on BCM47081 with serial flash. It has 3 LEDs and just one (reset) button. Signed-off-by: Dan Haab <dhaab@luxul.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-15 09:29:27 +07:00
bcm47081-luxul-xap-1410.dtb \
ARM: dts: BCM5301X: Add DT for Luxul XWR-1200 Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial flash (for bootloader and NVRAM) and NAND flash (for firmware). Signed-off-by: Dan Haab <dhaab@luxul.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-15 09:29:28 +07:00
bcm47081-luxul-xwr-1200.dtb \
ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2 This is BCM47081A0 based home router with BCM43217 and BCM4352 wireless chipsets. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-03-14 17:39:41 +07:00
bcm47081-tplink-archer-c5-v2.dtb \
ARM: BCM5301X: Add DT for Asus RT-AC87U Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-05-16 21:55:39 +07:00
bcm4709-asus-rt-ac87u.dtb \
ARM: BCM5301X: Add DT for Buffalo WXR-1900DHP Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-05-13 14:10:52 +07:00
bcm4709-buffalo-wxr-1900dhp.dtb \
ARM: dts: BCM5301X: Add basic DT for Linksys EA9200 It's tri-band wireless home router based on BCM4709A0 with 3 x BCM43602 chipsets. LEDs will be hopefully added later to the DT. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-25 14:09:16 +07:00
bcm4709-linksys-ea9200.dtb \
ARM: BCM5301X: Add DT for Netgear R7000 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-08-26 21:13:22 +07:00
bcm4709-netgear-r7000.dtb \
ARM: dts: bcm5301x: Add BCM SVK DT files Add device tree files for Broadcom Northstar based SVKs. Since the bcm5301x.dtsi already exists, all that is necessary is the dts files to enable the UARTs. With these files, the SVKs are able to boot to shell. Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-11-03 01:34:53 +07:00
bcm4709-netgear-r8000.dtb \
ARM: BCM5301X: Add DT for TP-LINK Archer C9 V1 It's BCM4709A0 based device with 16 MiB flash, 128 MiB of RAM and two PCIe based on-PCB BCM4360 chipsets. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-11-13 17:12:09 +07:00
bcm4709-tplink-archer-c9-v1.dtb \
ARM: BCM5301X: Add DT for D-Link DIR-885L It's device based on BCM47094 which is quite similar to BCM4709 except for higher CPU frequency. This device has 2 flash memories, it boots from serial one and stores firmware on NAND. Other than that we define standard stuff like LEDs, buttons and UART. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-01-27 05:35:16 +07:00
bcm47094-dlink-dir-885l.dtb \
ARM: dts: BCM5301X: Add basic DT for Linksys EA9500 It's tri-band wireless home router based on BCM47094 AKA BCM4709C0. It uses 3 x BCM4366 chipsets for wireless. Panamera seems to be board name used by Linksys. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-02-23 20:06:36 +07:00
bcm47094-linksys-panamera.dtb \
ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports board design. Signed-off-by: Dan Haab <dhaab@luxul.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-10-09 22:46:23 +07:00
bcm47094-luxul-abr-4500.dtb \
ARM: dts: BCM5301X: Add DT for Luxul XAP-1610 It's an access point based on BCM47094 SoC with two BCM4366E wireless chipsets. Signed-off-by: Dan Haab <dan.haab@luxul.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-05-04 23:08:44 +07:00
bcm47094-luxul-xap-1610.dtb \
ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front board design. Signed-off-by: Dan Haab <dhaab@luxul.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-10-09 22:46:22 +07:00
bcm47094-luxul-xbr-4500.dtb \
ARM: BCM5301X: Add DT for Luxul XWR-3100 Luxul XWR-3100 is a wireless router based on BCM47094 SoC with two 4366c0 FullMAC PCIe cards on the PCB. It uses NAND with BCH-4 ECC algorithm. Signed-off-by: Dan Haab <dhaab@luxul.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-09-28 00:27:11 +07:00
bcm47094-luxul-xwr-3100.dtb \
ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1 Luxul XWR-3150 is a wireless router similar to the XWR-3100 except: 1) It has more RAM 2) Its NAND controller in running in BCH8 mode 3) LAN ports LEDs are hardware controlled Signed-off-by: Dan Haab <dan.haab@luxul.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-05-04 23:08:43 +07:00
bcm47094-luxul-xwr-3150-v1.dtb \
ARM: BCM5301X: Add DT for Netgear R8500 Netgear R8500 is another BCM47094 device, it just has three BCM4366 wireless chipsets. It's a very standard DT with mostly GPIO devices. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-08-23 13:40:32 +07:00
bcm47094-netgear-r8500.dtb \
ARM: dts: bcm5301x: Add BCM SVK DT files Add device tree files for Broadcom Northstar based SVKs. Since the bcm5301x.dtsi already exists, all that is necessary is the dts files to enable the UARTs. With these files, the SVKs are able to boot to shell. Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-11-03 01:34:53 +07:00
bcm94708.dtb \
bcm94709.dtb \
ARM: dts: BCM5301x: Add BCM953012ER board Add support for the Broadcom BCM953012 Enterprise Router reference board, enable the following peripherals: - UART0 (UART1 is not populated) - WPS and restart GPIO buttons - Ethernet switch w/ only two facing ports - NAND flash - SPI-NOR flash Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-23 07:00:35 +07:00
bcm953012er.dtb \
ARM: dts: BCM5301X: Add support for BCM953012HR Initial version of DTS to support Broadcom BCM953012HR Northstar HR platform, similar to, but not the same as existing 953012K. Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-02-24 02:23:03 +07:00
bcm953012hr.dtb \
ARM: dts: bcm5301x: Add BCM SVK DT files Add device tree files for Broadcom Northstar based SVKs. Since the bcm5301x.dtsi already exists, all that is necessary is the dts files to enable the UARTs. With these files, the SVKs are able to boot to shell. Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-11-03 01:34:53 +07:00
bcm953012k.dtb
ARM: BCM5301X: Add basic dts for BCM53573 based Tenda AC9 BCM53573 seems to be low priced alternative for Northstar chipsts. It uses single core Cortex-A7 and doesn't have SDU or local (TWD) timer. It was also stripped out of independent SPI controller and 2 GMACs. DTS for Tenda AC9 isn't completed yet. It misses e.g. switch entry (we still need some b53 fixes) and probably some clocks. It adds support for basic features however and can be improved later. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-08-23 12:37:43 +07:00
dtb-$(CONFIG_ARCH_BCM_53573) += \
ARM: dts: BCM53573: Add DT for Luxul XAP-1440 This is BCM53573 WiSoC based outdoor access point with an extra BCM43217 chipset used for 2.4 GHz. Signed-off-by: Dan Haab <dhaab@luxul.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-10-09 22:47:00 +07:00
bcm47189-luxul-xap-1440.dtb \
ARM: dts: BCM53573: Add DT for Luxul XAP-810 This is BCM53573 WiSoC based access point with an extra BCM43217 chipset used for 2.4 GHz. Signed-off-by: Dan Haab <dhaab@luxul.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-10-09 22:46:59 +07:00
bcm47189-luxul-xap-810.dtb \
ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support Adds support for the Broadcom reference board BCM947189ACDMBR which features the following: * 128MB of DRAM * External MoCA support through a Broadcom BCM6802 chip * 1x external Gigabit PHY through the external BCM6802 * 1x USB 2.0 port * 1x PCIE slot * Few configurable buttons and LEDs Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-07-19 02:37:37 +07:00
bcm47189-tenda-ac9.dtb \
bcm947189acdbmr.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
bcm911360_entphn.dtb \
ARM: dts: Enable Broadcom Cygnus SoC DT files to enable cygnus consisting on reference designs and cygnus core configuration. Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Arun Parameswaran <aparames@broadcom.com> Tested-by: Jonathan Richardson <jonathar@broadcom.com> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2014-10-15 06:42:25 +07:00
bcm911360k.dtb \
ARM: dts: Enable Broadcom Cygnus BCM958305K DT file to enable the Wireless Audio reference design based on the BCM58305. Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Tested-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Jonathan Richardson <jonathar@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-03 05:41:10 +07:00
bcm958300k.dtb \
bcm958305k.dtb
ARM: dts: Hurricane 2: Add basic support for Ubiquiti UniFi Switch 8 Add basic board support for the Ubiquiti UniFi Switch 8 port model. This is a small home and office use managed switch based on the BCM53342 switching control SoC. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-09-29 06:15:01 +07:00
dtb-$(CONFIG_ARCH_BCM_HR2) += \
bcm53340-ubnt-unifi-switch8.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
bcm28155-ap.dtb \
ARM: dts: bcm23550: Add device tree files Add device tree files for the Broadcom BCM23550 SoC and the Broadcom Sparrow board. Signed-off-by: Chris Brand <chris.brand@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-12 04:36:22 +07:00
bcm21664-garnet.dtb \
bcm23550-sparrow.dtb
ARM: NSP: add minimal Northstar Plus device tree Add a very minimalistic set of Northstar Plus Device Tree files which describes the SoC and the BCM958625 implementation. The perpherials described are: ARM Cortex A9 CPU 2 8250 UARTs ARM GIC PL310 L2 Cache ARM A9 Global timer Signed-off-by: Kapil Hali <kapilh@broadcom.com> Signed-off-by: Jon Mason <jonmason@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-09-01 06:48:53 +07:00
dtb-$(CONFIG_ARCH_BCM_NSP) += \
ARM: dts: NSP: Add new DT file for bcm958522er Create a new device tree file for the Broadcom Northstar Plus bcm958522er SVK. This SVK has 2GB RAM, 2 ports Ethernet, 2 PCI slots, and 1 UART. Also, it has the ability to reboot via GPIO. To be added in the future is support for the USB. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-08-04 01:39:03 +07:00
bcm958522er.dtb \
ARM: dts: NSP: Add new DT file for bcm958525er Create a new device tree file for the Broadcom Northstar Plus bcm958525er SVK. This SVK has 2GB RAM, 2 ports Ethernet, 2 eSATA, 2 PCI slots, and 1 UART. Also, it has the ability to reboot via GPIO. To be added in the future is support for the USB. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-08-04 01:39:02 +07:00
bcm958525er.dtb \
ARM: dts: NSP: Add XMC board support The BCM958525XMC board is a smaller form factor typically used as controller boards for switches. This smaller board has less devices pinned out, so only a few need be populated in the device tree. Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-08 05:28:06 +07:00
bcm958525xmc.dtb \
ARM: dts: NSP: Add new DT file for bcm958622hr Create a new device tree file for the Broadcom Northstar Plus bcm958622hr SVK. This SVK has 2GB RAM, 5 port Ethernet, 2 PCI slots, and 1 UART. Also, it has the ability to reboot via GPIO. To be added in the future are support for the USB and SLIC audio. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-08-04 01:39:06 +07:00
bcm958622hr.dtb \
ARM: dts: NSP: Add new DT file for bcm958623hr Create a new device tree file for the Broadcom Northstar Plus bcm958623hr SVK. This SVK has 2GB RAM, 5 ports Ethernet, SATA, 2 PCI slots, and 1 UART. Also, it has the ability to reboot via GPIO. To be added in the future are support for the USB and SLIC audio. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-08-04 01:39:05 +07:00
bcm958623hr.dtb \
ARM: dts: NSP: Add new DT file for bcm958625hr Create a new device tree file for the Broadcom Northstar Plus HR SVK. This SVK is a smaller form factor, and thus only has 2 PCI slots and 1 UART. Also, it has the ability to reboot via GPIO (instead of the processor reset). Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-06 06:29:32 +07:00
bcm958625hr.dtb \
ARM: dts: NSP: Add new DT file for bcm988312hr Create a new device tree file for the Broadcom Northstar Plus bcm988312hr SVK. This SVK has 2GB RAM, 5 ports Ethernet, 2 eSATA, 2 PCI slots, and 1 UART. Also, it has the ability to reboot via GPIO. To be added in the future is support for the USB. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-08-04 01:39:04 +07:00
bcm988312hr.dtb \
ARM: NSP: add minimal Northstar Plus device tree Add a very minimalistic set of Northstar Plus Device Tree files which describes the SoC and the BCM958625 implementation. The perpherials described are: ARM Cortex A9 CPU 2 8250 UARTs ARM GIC PL310 L2 Cache ARM A9 Global timer Signed-off-by: Kapil Hali <kapilh@broadcom.com> Signed-off-by: Jon Mason <jonmason@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-09-01 06:48:53 +07:00
bcm958625k.dtb
ARM: add Armada 1500 and Sony NSZ-GS7 device tree files This adds very basic device tree files for the Marvell Armada 1500 SoC (Berlin BG2) and the Sony NSZ-GS7 GoogleTV board. Currently, SoC only has nodes for cpus, some clocks, l2 cache controller, local timer, apb timers, uart, and interrupt controllers. The Sony NSZ-GS7 is a GoogleTV consumer device comprising the Armada 1500 SoC above. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jisheng Zhang <jszhang@marvell.com>
2013-09-09 19:17:52 +07:00
dtb-$(CONFIG_ARCH_BERLIN) += \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
berlin2-sony-nsz-gs7.dtb \
berlin2cd-google-chromecast.dtb \
ARM: dts: berlin2cd: add Valve Steam Link board Valve Steam Link is a consumer device built around the Marvell BG2CD SoC. This board file enables the UART, USB and Ethernet interfaces as well as internal I2C and SDIO, and adds SoC voltage regulator and board-specific GPIO restart method info. Cc: Sam Lantinga <saml@valvesoftware.com> Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
2018-03-19 00:12:40 +07:00
berlin2cd-valve-steamlink.dtb \
ARM: dts: berlin: add the Marvell BG2-Q DMP device tree Adds initial support for the Marvell BG2-Q DMP. The board has 2GB of memory, an uart activated and what's initially supported by the Marvell Armada 1500 pro dtsi. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-03-18 21:32:47 +07:00
berlin2q-marvell-dmp.dtb
ARM: brcmstb: dts: add a reference DTS for Broadcom 7445 Add a sample DTS which will allow bootup of a board populated with the BCM7445 chip. Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Matt Porter <mporter@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-26 16:27:21 +07:00
dtb-$(CONFIG_ARCH_BRCMSTB) += \
bcm7445-bcm97445svmb.dtb
ARM: dts: clps711x: Add DT Cirrus Logic EDB7211 Development board This adds the Cirrus Logic EP7209,EP7211 DT templates and support for EDB7211 Development board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-06-04 14:10:04 +07:00
dtb-$(CONFIG_ARCH_CLPS711X) += \
ep7211-edb7211.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_DAVINCI) += \
ARM: dts: da850: Add basic DTS for the LCDK The LCDK is the successor to the late Hawkboard. Among the differences are the flash (16bits vs 8bits) and some pins (MMC, LEDs, buttons, some external connectors), however the main components remain the same (eth. phy, audio codec, video decoder and DAC) except for the main PMIC, different and hard-wired on the LCDK (the LDOs and DCDCs are always on). A DT-only boot with this addition gives functional UART, reboot via watchdog, RTC, ethernet and MMC (I added the CD GPIO for the MMC although davinci_mmc doesn't call the OF facilities of mmc core). Cc: Sekhar Nori <nsekhar@ti.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Karl Beldan <kbeldan@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-08-06 03:29:49 +07:00
da850-lcdk.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
da850-enbw-cmc.dtb \
ARM: dts: Add LEGO MINDSTORMS EV3 dts This adds a device tree definition file for LEGO MINDSTORMS EV3. What is working: * Pin muxing * Pinconf * GPIOs * MicroSD card reader * UART on input port 1 * Buttons * LEDs * Poweroff/reset * Flash memory * EEPROM * USB host port * USB peripheral port What is not working/to be added later: * Speaker - have patch submitted to get pwm-beeper working - maybe someday it will have a real sound driver that uses PRU * A/DC chip - have driver submitted and accepted - waiting for ack on device tree bindings * Display - waiting for "simple DRM" to be mainlined * Bluetooth - needs new driver for sequencing power/enable/clock * Input and output ports - need some sort of new phy or extcon driver as well as PRU UART and PRU I2C drivers * Battery indication - needs new power supply driver Note on flash partitions: These partitions are based on the official EV3 firmware from LEGO. It is expected that most users of the mainline kernel on EV3 will be booting from an SD card while retaining the official firmware in the flash memory. Furthermore, the official firmware uses an ancient U-Boot (2009) that has no device tree support. So, it makes sense to have this partition table in the EV3 device tree file. In the unlikely case that anyone does create their own firmware image with different partitioning, they can use a modern U-Boot in their own firmware image that modifies the device tree with the custom partitions. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-14 02:03:42 +07:00
da850-evm.dtb \
da850-lego-ev3.dtb
ARM: digicolor: add minimal device tree description cx92755.dtsi describes CX92755 on chip peripherals. cx92755_equinox.dts describes the Equinox evaluation board for the CX92755 SoC. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-29 05:04:10 +07:00
dtb-$(CONFIG_ARCH_DIGICOLOR) += \
cx92755_equinox.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_EFM32) += \
efm32gg-dk3750.dtb
dtb-$(CONFIG_ARCH_EXYNOS3) += \
ARM: dts: exynos: Add exynos3250-artik5 dtsi file for ARTIK5 module This patch adds the Device Tree source for Samsung ARTIK5 module[1] based on Exynos3250 SoC. The ARTIK5 module includes the following devices: - Application Processor (Samsung Exynos3250) - WiFi/BT Combo chip (Broadcom4354) - PMIC (Samsung S2MPS14) - eMMC (4GB) - DRAM LPDDR3 (512MB) - Connectors pin (60 Pins x 3 set) Also, this patch adds the ARTIK5 evaluation board[2] dts file which includes the ARTIK5 module[1] and have the devices such as sound codec, sd card port, ethernet port, uart port and so on. [1] https://www.artik.io/hardware/artik-5 [2] http://www.digikey.com/product-search/en?FV=ffecca14 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-31 09:48:04 +07:00
exynos3250-artik5-eval.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
exynos3250-monk.dtb \
exynos3250-rinato.dtb
dtb-$(CONFIG_ARCH_EXYNOS4) += \
ARM: dts: Add board dts file for exynos3250-rinato This patch adds support for device tree source for Samsung Rinato board (Gear 2) based on Exynos3250 SoC. This dts file support following features: - eMMC - Main PMIC (Samsung S2MPS14) - Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger) - RTC of Exynos3250 - ADC of Exynos3250 with NTC thermistor - I2S of Exynos3250 - TMU of Exynos3250 - MFC of Exynos3250 - Secure firmware for Exynos3250 secondary cpu boot - Serial ports of Exynos3250 - gpio-key for power key Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-07 06:10:12 +07:00
exynos4210-origen.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
exynos4210-smdkv310.dtb \
ARM: soc: multiplatform enablement This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQaO7aAAoJEIwa5zzehBx3bUIP/02U8PhkHJJrrowyIsWRBOql 7LPJ53PRRgrpBdmEGzFD3TO3zaNyrjQRbYgNDvzHMO6NAMNvdRFouuWYjO11/tuB i32zssXCC+eUOEgbAo/U/lYq+UOvqw9gv6mU+3+i3OcGEhdKOaoT/DSLPQC4hoDm 222TeLfFB3HJXu5n720dEQ9V3fO6TS1+bbh8TU3cjHqzceXsOrffZqOA5CQxUcRr KWwOjA0nALDwWcqgv45GJNwY3GTyAQ/hPMQavnuWK0voJ+qUYk5HftKocAK7C+py 0T0OFOAHTwtyhvzJBxLC84M6Ox465BYXyeNjIB+2nG/Um9+mDoP0dnWpGy4c7DMU P5hyqbeLGeqjUXQuYtRmgMMc3UeHKoUGAfXW9eMsjLa6/M4NLGv//7E7LbZPpgMZ obkjwuesmcaYn/FRyj/yFmC35YlF4oCLziVzEtURZw3eKHHSUlhkTDSMNnkcZ0kZ Vv7kFxnD2Y46ixiwSJv30ErQnVkgI3MdqDlDxkE8r5+phYuK4gCrNaJtiwRh/oNw cFhpPxKuA0sJ9b6YRTzjC45eT/XZomEEr/uifCFeRNaCquyjYP00Mm8F0flSqwx9 zi+emzPAwNmk1bvxMUM/idGnaj0V4p+BAYUAvkbSoqU1p1flzyhU88fGTSIyKOt6 K5TCDS2v5hrVykK9TDwl =Tc6y -----END PGP SIGNATURE----- Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-02 09:11:38 +07:00
exynos4210-trats.dtb \
ARM: dts: exynos4210: Add basic dts file for universal_c210 board This patch adds basic device tree sources for Universal C210 board. Currently support includes: - eMMC - serial - max8952 and max8998 voltage regulators. - gpio-keys More support will be added in further patches. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-23 22:46:34 +07:00
exynos4210-universal_c210.dtb \
ARM: dts: exynos: Add Samsung's Exynos4412-based Midas boards "Midas" is the codename for a family of smartphones released by Samsung Mobile. It includes the Galaxy S3 (GT-I9300/I9305) and the Galaxy Note 2 (GT-N7100/N7105). The boards largely have the same peripherals: the main differences are touchscreen, display panel and cellular modem. Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-02-18 20:41:23 +07:00
exynos4412-i9300.dtb \
exynos4412-i9305.dtb \
ARM: dts: exynos: Add TOPEET itop elite based board The TOPEET itop Exynos4412 has three versions of base boards. The Elite version is the cheap one without too much peripheral devices on it. Currently supported are serial console, wired networking (USB), USB OTG in peripheral mode, USB host, SD storage, GPIO buttons, PWM beeper, ADC and LEDs. The WM8960 analog audio codec is also enabled. The FIMC is not used for camera currently, I enabled it just for a colorspace converter. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> [krzk: fixup pin function macro, adjust commit msg] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-10-19 00:18:49 +07:00
exynos4412-itop-elite.dtb \
ARM: dts: exynos: Add Samsung's Exynos4412-based Midas boards "Midas" is the codename for a family of smartphones released by Samsung Mobile. It includes the Galaxy S3 (GT-I9300/I9305) and the Galaxy Note 2 (GT-N7100/N7105). The boards largely have the same peripherals: the main differences are touchscreen, display panel and cellular modem. Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-02-18 20:41:23 +07:00
exynos4412-n710x.dtb \
ARM: dts: refactor Odroid DTS file and add support for Odroid X2 and U2/U3 This patch moves some parts of exynos4412-odroidx.dts to common exynos4412-odroid-common.dtsi file and adds support for Odroid X2 and U2/U3 boards. X2 is same as X, but it has faster SoC module (1.7GHz instead of 1.4GHz), while U2/U3 differs from X2 by different way of routing signals to host USB hub. It also lacks some hw modules not yet supported by those dts files (i.e. LCD & touch panel). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-16 00:54:07 +07:00
exynos4412-odroidu3.dtb \
ARM: dts: Add board dts file for ODROID-X Add initial DT for Hardkernel's ODROID-X board based on EXYNOS4412 SoC. This patch including adds the node to support fixed voltage for peripherals like LED, ethernet controller, and this patch adds GPIO connected LEDS on ODROID-X board and configure its properties like following: LED1: use 'heartbeat' trigger, blinking while the board is running. LED2: use 'mmc0' trigger, on when mmc0 is accessing. And adds the device node to support eMMC storage on SDCARD4 ports, controlled by MSHC. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Acked-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: squashed into one commit as per Olof's comment] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-11 08:12:50 +07:00
exynos4412-odroidx.dtb \
ARM: dts: refactor Odroid DTS file and add support for Odroid X2 and U2/U3 This patch moves some parts of exynos4412-odroidx.dts to common exynos4412-odroid-common.dtsi file and adds support for Odroid X2 and U2/U3 boards. X2 is same as X, but it has faster SoC module (1.7GHz instead of 1.4GHz), while U2/U3 differs from X2 by different way of routing signals to host USB hub. It also lacks some hw modules not yet supported by those dts files (i.e. LCD & touch panel). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-16 00:54:07 +07:00
exynos4412-odroidx2.dtb \
ARM: dts: add board dts file for EXYNOS4412 based Origen board Add a minimal board dts file for EXYNOS4412 based Insignal Origen board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-01 06:07:39 +07:00
exynos4412-origen.dtb \
ARM: dts: re-ordering exynos dtbs in Makefile Re-ordering in alphabetical. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24 11:33:46 +07:00
exynos4412-smdk4412.dtb \
ARM: dts: add support for EXYNOS4412 based TINY4412 board Add a minimal board dts file for EXYNOS4412 based FriendlyARM's TINY4412 board. This patch including support peripherals like UART, SD card on SDMMC2 port and GPIO connected LEDs. Signed-off-by: Alex Ling <kasimling@gmail.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-19 03:34:26 +07:00
exynos4412-tiny4412.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
exynos4412-trats2.dtb
dtb-$(CONFIG_ARCH_EXYNOS5) += \
ARM: dts: Add initial board support file for exynos5250-arndale Arndale is a low cost board based on the Samsung Exynos5250 SoC. This patch adds initial device tree support for this board. Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Girish K S <ks.giri@samsung.com> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-02-05 07:15:56 +07:00
exynos5250-arndale.dtb \
ARM: dts: Add board dts file for Snow board (ARM Chromebook) This dts file is based on the Snow dts file in the Chromium OS kernel tree with the following changes: * Some details have been updated to match the exynos5250-smdk5250.dts file from linux-next (as of c11068538994430547722dc9fb515a0ceefd5cb9). * This file doesn't include references to hardware whose upstream support isn't quite there yet. That includes most i2c devices. Note that most i2c busses have been included with no devices. The Snow dts file is mostly just an include of the "cros5250" dts file which describes a class of similar boards. Support for other boards has not yet been send upstream. With this file and a change to use UART3 for serial output I can: * Boot to a command line using either SD or EMMC as a root filesystem * See the power button and lid switch using evtest. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-21 11:32:21 +07:00
exynos5250-smdk5250.dtb \
ARM: dts: fix duplicated build target and alphabetical sort out for exynos Commit db5b0ae00712 ("Merge tag 'dt' of git://git.kernel.org/.../arm-soc") causes a duplicated build target. This patch fixes it and sorts out the build target alphabetically so that we can recognize something wrong easily. Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-22 01:02:13 +07:00
exynos5250-snow.dtb \
ARM: dts: Add Exynos5250 Snow Rev5+ support on exynos5250-snow-rev5 There are 2 revisions of the Exynos5250 Snow Chromebook that were shipped: Rev4 and Rev5. The only difference between these 2 revisions is the codec, Rev4 has a max98095 codec while Rev5 has a max98090. Mainline only supports Rev4 so this patch moves the common device nodes to a DTSI file and adds a DTS for the Exynos5250 Snow Rev5. The Snow Rev5 DTS is based on the DTS found in the ChromiumOS 3.8 tree. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-30 13:53:55 +07:00
exynos5250-snow-rev5.dtb \
ARM: dts: Add exynos5250-spring device tree Adds initial support for the HP Chromebook 11. Cc: Vincent Palatin <vpalatin@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Cc: Stephan van Schaik <stephan@synkhronix.com> Signed-off-by: Andreas Faerber <afaerber@suse.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-23 22:02:14 +07:00
exynos5250-spring.dtb \
ARM: dts: add dts file for exynos5260-xyref5260 board The patch adds the dts file for xyref5260 board which is based on exynos5260 SoC. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-09 04:26:44 +07:00
exynos5260-xyref5260.dtb \
ARM: dts: exynos: Add initial support for Odroid XU board The Hardkernel's Odroid XU board was first design with big.LITTLE SoC from Samsung: the Exynos5410. Details: 1. Exynos5410 octa-core (A15+A7, however as of now only one cluster is enabled), 2. 2 GB DDR3 RAM, 3. PowerVR SGX544MP3 GPU (not enabled in DTS), 4. USB 3.0 Host x 1, USB 3.0 OTG x 1, USB 2.0 Host x 4, 5. HDMI 1.4a, MIPI DSI and Display Port (Display Port not on all of revisions though), 6. eMMC 4.5 and microSD slots. Comparing this board to Odroid XU3 (more popular), the differences are: 1. Exynos5410 instead of 5422, 2. MIPI DSI LCD connector, 3. Main PMIC: Maxim 77802 instead of S2MPS11, 4. USB3503+LAN9730 instead of integrated LAN9514, 5. eMMC 4.5 instead of eMMC 5.0, This patch adds initial support for the XU board with working basic functions, eMMC/SD and USB (including attached ethernet adapter). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Link: http://www.hardkernel.com/main/products/prdt_info.php?g_code=G137510300620
2016-05-03 16:48:18 +07:00
exynos5410-odroidxu.dtb \
ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410 Add initial device tree nodes for EXYNOS5410 SoC and SMDK5410 board. Signed-off-by: Tarek Dakhran <t.dakhran@samsung.com> Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-27 04:54:13 +07:00
exynos5410-smdk5410.dtb \
ARM: dts: Add initial support for Arndale Octa board Arndale Octa board is based on Exynos5420 SoC. This patch adds the basic support required for booting it through DT. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-12 05:32:39 +07:00
exynos5420-arndale-octa.dtb \
ARM: dts: Add exynos5420 peach-pit board support Adds the google peach-pit board dts file which uses exynos5420 SoC. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-09 04:06:25 +07:00
exynos5420-peach-pit.dtb \
ARM: dts: Add initial device tree support for EXYNOS5420 Add initial device tree nodes for EXYNOS5420 SoC and SMDK5420 board. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-18 22:29:35 +07:00
exynos5420-smdk5420.dtb \
ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board Odroid HC1 board is based on Odroid XU4 board, but it has no HDMI, no eMMC, no built-in USB3.0 hub, no extension port pins, and no GPIO button. USB3.0 ports are used for built-in JMicron USB to SATA bridge and Gigabit R8152 ethernet chips. HC1 uses only passive cooling. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-10-02 13:39:34 +07:00
exynos5422-odroidhc1.dtb \
ARM: dts: Add dts file for Odroid XU3 board Add DTS for the Hardkernel Odroid XU3. The name of the DTS file is kept the same as the vendors naming, which means it's prefixed with exynos5422 instead of exynos5800 as the SoC name even though it includes the exyno5800 dtsi. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-12 15:35:49 +07:00
exynos5422-odroidxu3.dtb \
ARM: dts: Add Odroid XU3 Lite support The Odroid XU3 Lite is almost the same as XU3, except: 1. Lower CPU frequencies (1.8 GHz for A15 and 1.3 GHz for A7, instead of 2.0 GHz and 1.4 GHz). 2. No DisplayPort. 3. No TI INA231 energy measurement sensors. This patch moves common nodes (which is almost everything) to a common DTSI file and adds a new XU3 Lite DTS. Currently in comparison to XU3, only the INA231 sensors are disabled to remove the warning: ina2xx 0-0040: error configuring the device: -6 Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-25 19:13:17 +07:00
exynos5422-odroidxu3-lite.dtb \
ARM: dts: Add support Odroid XU4 board for exynos5422-odroidxu4 Add Hardkernel Odroid XU4 board Device Tree sources. The board differs from Odroid XU3 and XU3-Lite by: 1. No green and red LEDs (except standard red power LED). 2. Only two PWM outputs are used (fan and blue LED) 3. No audio codec. 4. Two USB3 ports in host mode (no micro USB3 connector for OTG). 5. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514). 6. Additional connector with IO ports (I2S_0, I2C_5). 7. No DisplayPort (like XU3-Lite). 8. No TI INA231 power measurement sensors (like XU3-Lite). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-16 06:37:11 +07:00
exynos5422-odroidxu4.dtb \
ARM: dts: add dts file for exynos5800-peach-pi board Adds support for google peach-pi board having the Exynos5800 SoC. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-12 05:56:34 +07:00
exynos5800-peach-pi.dtb
ARM: dts: add device tree for Gemini SoC and SQ201 This adds a device tree for the Gemini SoC and the ITian Square One SQ201 board that has been my testing target for Gemini device tree support. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-21 19:00:15 +07:00
dtb-$(CONFIG_ARCH_GEMINI) += \
ARM: dts: Add DTS file for D-Link DIR-685 This adds a device tree file for the Gemini-based D-Link DIR-685 router, supporting all devices that are currently supported in the main DTSI SoC file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-30 03:39:11 +07:00
gemini-dlink-dir-685.dtb \
ARM: dts: Add basic devicetree for D-Link DNS-313 This adds a basic device tree for the D-Link DNS-313 NAS enclosure. This device has a thermal sensor and a fan so we add a thermal zone for the chassis in the device tree based on information from the product. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-17 22:36:32 +07:00
gemini-dlink-dns-313.dtb \
ARM: dts: add a devicetree for Raidsonic NAS IB-4220-B This devicetree is simply based on the board file in arch/arm/mach-gemini/board-nas4220b.c and contain the equivalent platform data, mainly just moving the GPIOs from the global numberspace to explicitly reference &gpio1. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-21 19:26:58 +07:00
gemini-nas4220b.dtb \
ARM: dts: add a devicetree for Teltonika RUT1xx This devicetree is simply based on the board file in arch/arm/mach-gemini/board-rut1xx.c and contain the equivalent platform data, mainly just moving the GPIOs from the global numberspace to explicitly reference their parent GPIO. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-21 20:05:57 +07:00
gemini-rut1xx.dtb \
ARM: dts: add a devicetree for Wiliboard WBD-111 This devicetree is simply based on the board file in arch/arm/mach-gemini/board-wbd111.c and contain the equivalent platform data, mainly just moving the GPIOs from the global numberspace to explicitly reference their parent GPIO. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-22 01:37:58 +07:00
gemini-sq201.dtb \
ARM: dts: add a devicetree for Wiliboard WBD-222 This devicetree is simply based on the board file in arch/arm/mach-gemini/board-wbd222.c and contain the equivalent platform data, mainly just moving the GPIOs from the global numberspace to explicitly reference their parent GPIO. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-22 02:55:46 +07:00
gemini-wbd111.dtb \
gemini-wbd222.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_HI3xxx) += \
hi3620-hi4511.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += \
highbank.dtb \
ARM: dts: Add Calxeda ECX-2000 support Separate out common dts pieces from highbank dts and add support for Calxeda ECX-2000 (Midway) SOC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25 23:59:09 +07:00
ecx-2000.dtb
ARM: dts: Add hip01-ca9x2 dts file Add dts file for Hisilicon hip01 ca9x2 board Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> [olof: Folded in smp enable-method from a different patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-24 10:09:58 +07:00
dtb-$(CONFIG_ARCH_HIP01) += \
hip01-ca9x2.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_HIP04) += \
hip04-d01.dtb
ARM: dts: add dts files for Hi3519 and tidy up the makefile entries - add dts files for Hi3519 - shuffle ARCH_HIGHBANK, ARCH_HISI, ARCH_HIX5HD2 and ARCH_HIP0X around to keep the list sorted Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-06-15 09:19:07 +07:00
dtb-$(CONFIG_ARCH_HISI) += \
hi3519-demb.dtb
dtb-$(CONFIG_ARCH_HIX5HD2) += \
hisi-x5hd2-dkb.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_INTEGRATOR) += \
integratorap.dtb \
ARM: dts: compile Integrator device trees This makes sure that the ARM Integrator device trees get compiled during build. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-13 03:22:59 +07:00
integratorcp.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_KEYSTONE) += \
ARM: dts: k2*: Rename the k2* files to keystone-k2* files As reported in [1], rename the k2* dts files to keystone-* files this will force consistency throughout. Script for the same (and hand modified for Makefile and MAINTAINERS files): for i in arch/arm/boot/dts/k2* do b=`basename $i`; git mv $i arch/arm/boot/dts/keystone-$b; sed -i -e "s/$b/keystone-$b/g" arch/arm/boot/dts/*[si] done NOTE: bootloaders that depend on older dtb names will need to be updated as well. [1] http://marc.info/?l=linux-arm-kernel&m=145637407804754&w=2 Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2016-03-22 23:06:22 +07:00
keystone-k2hk-evm.dtb \
keystone-k2l-evm.dtb \
keystone-k2e-evm.dtb \
ARM: dts: keystone: Add minimum support for K2G ICE evm Add barebones dts support for TI's K2G Industrial Communication Engine evm. This dts allows the board to boot using a ram based filesystem. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-05-22 12:46:56 +07:00
keystone-k2g-evm.dtb \
keystone-k2g-ice.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-b3.dtb \
Kirkwood: add support for Seagate BlackArmor NAS220 This patch adds support for Seagate BlackArmor NAS220. The Seagate BlackArmor NAS 220 is a NAS system based on Marvell 88f6192. It has 32MB NAND and 128MB DRAM. It has two SATA slots, one Gigabit Ethernet port, two USB 2.0 ports, two buttons and three LEDs. There is a serial port available on the CN5 connector on the board (1 - TX, 4 - RX, 6 - GND). The only functionality still not implemented is the bi-color led on the front panel (status). Pins mpp22 and mpp23 control this led. Setting mpp22 to high and mpp23 to low results in orange color. Setting mpp22 to low and mpp23 to high results in blue color. The third led is wired to show the SATA activity on the two drives. Signed-off-by: Evgeni Dobrev <evgeni@studio-punkt.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2014-12-28 17:46:54 +07:00
kirkwood-blackarmor-nas220.dtb \
ARM: mvebu: Move kirkwood DT boards into mach-mvebu Move the kirkwood DT support into mach-mvebu, and make them part of ARCH_MULTI_V5. Minimal changes have been made in order to make it boot. Cleanup of the header files and integration with mvebu will take place in following patches. In order to help Debian transition between mach-kirkwood and mach-mvebu, the DTS files are compiled for both, allowing Debian to continue using mach-kirkwood until all remaining boards are supported by mach-mvebu. Debian is then expected to simply swap from mach-kirkwood to mach-mvebu and mach-kirkwood will be removed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-23 02:14:57 +07:00
kirkwood-cloudbox.dtb \
ARM: Kirkwood: add DT support for d2 Network v2 This patch adds DT support for the LaCie NAS d2 Network v2 (d2net_v2). Most of the hardware characteristics are shared with the 2Big and 5Big Network v2 boards. - CPU: Marvell 88F6281 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - 2 SATA ports: internal and eSATA - Gigabit ethernet: PHY Marvell 88E1116R - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 power switch - 1 SATA LED (bi-color, blue and red) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1404830545-15581-3-git-send-email-simon.guinot@sequanux.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-08 21:42:25 +07:00
kirkwood-d2net.dtb \
arm: kirkwood: convert db-88f6281/db-88f6282 to the Device Tree This commit converts the Marvell DB-88F6281/DB-88F6282 board to the Device Tree. In fact, the code was supporting two different boards: one with the 6281 SoC variant, and one with the 6282 SoC variant. The difference between the two being that the 6281 has one PCIe interface, and the 6282 has two PCIe interfaces. In order to handle that with the Device Tree, we create a 'kirkwood-db.dtsi' file that contains the definitions common to both boards, and 'kirkwood-db-88f6281.dts' and 'kirkwood-db-88f6282.dts' for the definitions specific to each board. This is similar to what is done for the QNAP TS219 Kirkwood platform. We have kept one single Kconfig option, just like it was before. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-15 20:37:01 +07:00
kirkwood-db-88f6281.dtb \
kirkwood-db-88f6282.dtb \
ARM: Kirkwood: Add support for DLink DIR665 Add a device tree description of the DLINK DIR665 wireless access point. The support for the 88E6171 switch will be added in a later patch. Signed-off-by: Claudio Leite <leitec@staticky.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1414793613-11798-2-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-01 05:13:30 +07:00
kirkwood-dir665.dtb \
ARM: Kirkwood: DT board setup for CloudBox This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox is a low cost NAS based on the Network Space v2. Chipset list: - CPU MARVELL 88F6702 1Ghz - SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - SPI flash, NOR 512KB - 1 push button - 2 LEDs (red and blue) There is no EEPROM and no USB ports embedded. Note that this board must not be confused with the Network Space Mini v2 which is embedded in a previous LaCie product also named CloudBox. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 05:41:28 +07:00
kirkwood-dns320.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
kirkwood-dns325.dtb \
ARM: kirkwood: move new dtbs to common Makefile This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-23 03:53:12 +07:00
kirkwood-dockstar.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
kirkwood-dreamplug.dtb \
ARM: Kirkwood: Add support for many Synology NAS devices Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <andrew@lunn.ch> translation of the board setup file maintained by Ben Peddell <klightspeed@killerwolves.net> The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC. Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43. Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply. Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Tested-by: Ben Peddell <klightspeed@killerwolves.net> (ds211j) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-20 03:02:37 +07:00
kirkwood-ds109.dtb \
kirkwood-ds110jv10.dtb \
kirkwood-ds111.dtb \
ARM: dts: kirkwood: add kirkwood-ds112.dtb to Makefile Commit 2d0a7addbd10 ("ARM: Kirkwood: Add support for many Synology NAS devices") created the new file kirkwood-ds112.dts but did not add it to the Makefile. Fixes: 2d0a7addbd10 ("ARM: Kirkwood: Add support for many Synology NAS devices") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-03-28 15:03:48 +07:00
kirkwood-ds112.dtb \
ARM: Kirkwood: Add support for many Synology NAS devices Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <andrew@lunn.ch> translation of the board setup file maintained by Ben Peddell <klightspeed@killerwolves.net> The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC. Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43. Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply. Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Tested-by: Ben Peddell <klightspeed@killerwolves.net> (ds211j) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-20 03:02:37 +07:00
kirkwood-ds209.dtb \
kirkwood-ds210.dtb \
kirkwood-ds212.dtb \
kirkwood-ds212j.dtb \
kirkwood-ds409.dtb \
kirkwood-ds409slim.dtb \
kirkwood-ds411.dtb \
kirkwood-ds411j.dtb \
kirkwood-ds411slim.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
kirkwood-goflexnet.dtb \
ARM: kirkwood: convert Guruplug Server Plus to use the device tree Add a device tree entry for the Guruplug Server Plus board. This port was based both on the work done on the dreamplug and the dockstar. It builds, boots and works on my Guruplug Server Plus. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-12-10 01:40:04 +07:00
kirkwood-guruplug-server-plus.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
kirkwood-ib62x0.dtb \
kirkwood-iconnect.dtb \
ARM: kirkwood: move new dtbs to common Makefile This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-23 03:53:12 +07:00
kirkwood-iomega_ix2_200.dtb \
ARM: kirkwood: DT board setup for Network Space v2 and parents This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:09:04 +07:00
kirkwood-is2.dtb \
ARM: kirkwood: move new dtbs to common Makefile This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-23 03:53:12 +07:00
kirkwood-km_kirkwood.dtb \
ARM: Kirkwood: DT board setup for LaPlug This patch adds DT board setup for the LaCie NAS LaPlug. Chipset list: - CPU MARVELL 88FR131 800Mhz - SDRAM memory: 128MB DDR2-800 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - 1 Mini PCI-Express port - 1 NAND 512 MB - 1 push button - 2 LEDs (red and blue) - 4 USB Ports Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-12-24 19:53:19 +07:00
kirkwood-laplug.dtb \
ARM: dts: kirkwood: add device tree for buffalo linkstation ls-qvl Add dts file to support Buffalo Linkstation LS-QVL, which is marvell kirkwood based 4-bay 3.5" HDD NAS. Product info: - (JPN) http://buffalo.jp/product/hdd/network/ls-qvl_r5/ - (ENG) http://www.buffalotech.com/products/network-storage/home-and-small-office/linkstation-pro-quad Signed-off-by: Mario Lange <mario_lange@gmx.net> Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 23:44:10 +07:00
kirkwood-linkstation-lsqvl.dtb \
ARM: dts: kirkwood: split lswvl dts to linkstation lsvl and lswvl LS-WVL/VL are both kirkwood-6282 based NAS devices, which share many MPP pins. However they are slightly different: - LS-WVL is 2-Bay NAS, and LS-VL is only 1-Bay. - There're two red LED indicator on LS-WVL to show when HDD fails, which is similar to LS-WXL, but there's no such on LS-VL. So after the split, common part goes into .dtsi file: - kirkwood-linkstation-6282.dtsi while all rest part goes into device specific .dts file: - kirkwood-linkstation-lsvl.dts - kirkwood-linkstation-lswvl.dts Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-21 21:38:50 +07:00
kirkwood-linkstation-lsvl.dtb \
ARM: dts: kirkwood: split lswxl dts to linkstation lswsxl and lswxl LS-WXL/WSXL are both kirkwood-6281 based 2-Bay NAS devices, which share many MPP pins. However they are slightly different: - There're two red LED indicator on LS-WXL to show when HDD fails, but there's no such on LS-WSXL. - There's 4-level speed adjustable FAN on LS-WXL, but not LS-WSXL. So after the split, common part goes into .dtsi file: - kirkwood-linkstation.dtsi - kirkwood-linkstation-duo-6281.dtsi while all rest part goes into device specific .dts file: - kirkwood-linkstation-lswsxl.dts - kirkwood-linkstation-lswxl.dts Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-21 21:38:49 +07:00
kirkwood-linkstation-lswsxl.dtb \
ARM: dts: kirkwood: split lswvl dts to linkstation lsvl and lswvl LS-WVL/VL are both kirkwood-6282 based NAS devices, which share many MPP pins. However they are slightly different: - LS-WVL is 2-Bay NAS, and LS-VL is only 1-Bay. - There're two red LED indicator on LS-WVL to show when HDD fails, which is similar to LS-WXL, but there's no such on LS-VL. So after the split, common part goes into .dtsi file: - kirkwood-linkstation-6282.dtsi while all rest part goes into device specific .dts file: - kirkwood-linkstation-lsvl.dts - kirkwood-linkstation-lswvl.dts Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-21 21:38:50 +07:00
kirkwood-linkstation-lswvl.dtb \
ARM: dts: kirkwood: split lswxl dts to linkstation lswsxl and lswxl LS-WXL/WSXL are both kirkwood-6281 based 2-Bay NAS devices, which share many MPP pins. However they are slightly different: - There're two red LED indicator on LS-WXL to show when HDD fails, but there's no such on LS-WSXL. - There's 4-level speed adjustable FAN on LS-WXL, but not LS-WSXL. So after the split, common part goes into .dtsi file: - kirkwood-linkstation.dtsi - kirkwood-linkstation-duo-6281.dtsi while all rest part goes into device specific .dts file: - kirkwood-linkstation-lswsxl.dts - kirkwood-linkstation-lswxl.dts Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-21 21:38:49 +07:00
kirkwood-linkstation-lswxl.dtb \
ARM: dts: kirkwood: Add DTS for Linksys EA4200v2/EA4500 This platform is based on a Marvell 88E6282 SoC and 88E6171 switch. [gregory.clement@free-electrons.com: fix block comment style] Signed-off-by: Bert Vermeulen <bert@biot.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-04 21:46:07 +07:00
kirkwood-linksys-viper.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
ARM: kirkwood: Add support for the MPL CEC4 Signed-off-by: Stefan Peter <s.peter@mpl.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-18 22:46:16 +07:00
kirkwood-mplcec4.dtb \
ARM: kirkwood: convert the mv88f6281gtw_ge board to DT This commit converts the mv88f6281gtw_ge Kirkwood board to use a Device Tree representation, except for the Ethernet devices and the DSA switch. Even though the mv643xx_eth driver has a DT binding, converting this board to use it is for now left on the side because it doesn't use a simple PHY, but a DSA switch instead. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-01 22:07:32 +07:00
kirkwood-mv88f6281gtw-ge.dtb \
ARM: Kirkwood: add DT description for nas2big This patch adds the DT description for the LaCie "2Big NAS" (nas2big). This NAS is an hardware upgrade of the 2Big Network v2. Chipset and device list: - CPU Marvell 88F6282 1600Mhz - SDRAM memory, 256MB DDR3 (2x128MB x8) 533Mhz - 1 Ethernet Gigabit port (PHY Marvell 88E1518) - Flash memory, NAND 256MB TSOP48 - I2C EEPROM, 512 bytes (AT24 type) - PCIe SATA controller JMicron JMB360 (eSATA) - I2C fan controller GMT G762 (with a separate alarm GPIO) - 1 USB2 host port - 1 push button - 1 power switch - 2 SATA LEDs (bi-color, blue and red) - 1 power LED (bi-color, blue and red) - CPLD for LEDs and start-up management (Altera Max EMP3064) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-02 03:51:40 +07:00
kirkwood-nas2big.dtb \
ARM: Kirkwood: Add DT descriptions for net2big and net5big. Describe LaCie 2Big and 5Big Network v2 using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1401132591-26305-3-git-send-email-andrew@lunn.ch Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-27 02:29:49 +07:00
kirkwood-net2big.dtb \
kirkwood-net5big.dtb \
ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT Add support for NETGEAR ReadyNAS Duo v2 (Hardware specs available here: http://natisbad.org/NAS/). Almost everything is supported via provided .dts. A board-readynas.c file is nonetheless required for device not only converted to DT (Gbit controller). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Tested-By: Arnaud Ebalard <arno@natisbad.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-20 05:28:06 +07:00
kirkwood-netgear_readynas_duo_v2.dtb \
ARM: kirkwood: Add support for NETGEAR ReadyNAS NV+ v2 Almost all hardware parts of the NETGEAR ReadyNAS NV+ v2 ([1] for more details) are supported by mainline kernel. The only missing elements in provided .dts file are: - the front LCD module (Winstar WINSTAR WH1602): driver development is ongoing. This is the same LCD module as on ReadyNAS 104. - the Macronix MX25L512 512Kbit SPI flash: no time to play with it yet. The device is the big brother (4 vs 2 bay) of the ReadyNAS Duo v2. The main differences are some additional LEDs for the disks, a Marvell 88SM4140 SATA Port multiplier (no driver required to access the disk) and previously described LCD module. Otherwise, it shares the same SoC (kirkwood 88F6282), RAM (256MB), NAND (128MB), RTC chip (Ricoh rs5c372a), fan controller (GMT G762), XHCI controller (NEC/Renesas µPD720200). [1]: http://natisbad.org/NAS5/ Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-30 22:13:44 +07:00
kirkwood-netgear_readynas_nv+_v2.dtb \
ARM: kirkwood: DT board setup for Network Space v2 and parents This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:09:04 +07:00
kirkwood-ns2.dtb \
ARM: kirkwood: DT board setup for Network Space Lite v2 This patch adds DT board setup for the LaCie NAS Network Space Lite v2. This board is derived from the Network Space v2 and a lot of hardware characteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Note that the SATA LED is not compatible with the driver leds-ns2. The LED behaviour ("on", "off" or "SATA activity blink") is controlled via a single MPP (21). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:09:05 +07:00
kirkwood-ns2lite.dtb \
ARM: kirkwood: DT board setup for Network Space v2 and parents This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:09:04 +07:00
kirkwood-ns2max.dtb \
ARM: kirkwood: DT board setup for Network Space Mini v2 This patch adds DT board setup for the LaCie NAS Network Space Mini v2 (aka SafeBox). The hardware characteristics are very close to those of the Network Space Lite v2. The main difference are: - A GPIO fan which is only available on the NS2 Mini. - A single USB host port is wired on the NS2 Mini. The NS2 Lite provides an additional dual-mode USB port (host/device). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:09:06 +07:00
kirkwood-ns2mini.dtb \
arm: kirkwood: add support for ZyXEL NSA310 Hello, Andrew > > +#define NSA310_GPIO_LED_ESATA_GREEN 12 > > <..> > > +#define NSA310_GPIO_POWER_OFF 48 > > It looks like most of these are not used. Please remove them. True. Fixed. > > +static struct mtd_partition nsa310_mtd_parts[] = { > > + { > > + .name = "uboot", > > + .offset = 0, > > + .size = 0x100000, > > + .mask_flags = MTD_WRITEABLE, > > + }, { > > <..> > You should be able to put all that into DT. Take a look at Correct. I did the conversion and tested that the partitions can be read with dd and produce exactly the same data before and after conversion. So, the partition offsets at least should be fine. > > +static struct i2c_board_info __initdata nsa310_i2c_info[] = { > > + { I2C_BOARD_INFO("adt7476", 0x2e) }, > > +}; > > You can also do this in DT as well. kirkwood-ts219.dtsi has > > i2c@11000 { > status = "okay"; > clock-frequency = <400000>; Ok, I did convert the i2c definition to use the devicetree. The adt7476 device itself is not at reach of device tree, AFAIK and requires more work at there? Thanks for your valuable comments. Following is a new patch that should address the problems and mistakes you pointed and also some of the pointed by Jason Cooper. The nand and i2c are now defined at DT and I also removed the pointless defines and ARM_APPENDED_DTB. It is based against the Linus' official 3.6 version. Best regards, Tero Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-26 22:56:16 +07:00
kirkwood-nsa310.dtb \
ARM: Kirkwood: Add support for another ZyXEL NSA310 variant There are a number of variants of the ZyXEL NSA310, with slightly different LEDs, buttons and i2c devices. Add a DTS file to support one more of these variants. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Tibor Hársszegi <tibor@harsszegi.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-17 23:51:49 +07:00
kirkwood-nsa310a.dtb \
ARM: dts: kirkwood: add kirkwood-nsa320.dtb to Makefile Commit be3d7d023b87 ("ARM: kirkwood: Add DTS file for NSA320") created the new file kirkwood-nsa320.dts but did not add it to the Makefile. Fixes: be3d7d023b87 ("ARM: kirkwood: Add DTS file for NSA320") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-03-28 15:38:31 +07:00
kirkwood-nsa320.dtb \
ARM: dts: kirkwood: Add DTS for Zyxel NSA325 Add a new DTS file to support the Zyxel NSA325(v2) dual bay NAS device, based on the NSA320 DTS files. The only difference to the NSA320 device is GPIO47. This en/disables the power for the hdd in slot2, currently fixed to on. [gregory.clement@free-electrons.com: fix comment format] Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-10 12:33:08 +07:00
kirkwood-nsa325.dtb \
ARM: kirkwood: add support for OpenBlocks A7 platform The OpenBlocks A7 board is designed and sold by PlatHome, and based on a Kirkwood 6283 Marvell SoC. It is quite similar to the OpenBlocks A6 already supported in the kernel, with the following main differences: - The A6 uses a RTC on I2C, while the A7 uses the internal SoC RTC. - The A6 has one Ethernet port, while the A7 has two Ethernet ports - The A6 has only one USB port, while the A7 integrates a USB hub, which provides two front-side USB port, and an internal USB port as well. - The A6 has 512 MB of RAM, while the A7 has 1 GB of RAM. - Slightly different GPIOs for some functions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-10-30 23:55:09 +07:00
kirkwood-openblocks_a6.dtb \
kirkwood-openblocks_a7.dtb \
ARM: Kirkwood: DT versions of OpenRD boards Create DTS files to describe the Marvell OpenRD boards. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1399836639-1918-1-git-send-email-andrew@lunn.ch Tested-by: Francois Lorrain <francois.lorrain@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-12 02:30:39 +07:00
kirkwood-openrd-base.dtb \
kirkwood-openrd-client.dtb \
kirkwood-openrd-ultimate.dtb \
ARM: Kirkwood: Added support for pogoplug e02 (pink/gray) The pogoplug differs from the SheevaPlug only by a few details, but especially in the led assignments. This patch was tested under Gentoo Linux and is based on dts files from Arch Linux ARM and OpenWrt. Suggested-by: Felix Kaechele <heffer@fedoraproject.org> Suggested-by: Oleg Rakhmanov <moonman.ca@gmail.com> Signed-off-by: Christoph Junghans <ottxor@gentoo.org> [Andrew Lunn <andrew@lunn.ch>: Fixed subject line] Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-14 11:49:29 +07:00
kirkwood-pogo_e02.dtb \
ARM: mvebu: kirkwood: add PogoPlug series 4 device tree This adds a device tree for the CloudEngines PogoPlug series 4 NAS device. Inspired by out-of-tree boardfiles from ArchLinux by Kevin Mihelich. Cc: Moonman <moonman.ca@gmail.com> Cc: Kevin Mihelich <kevin@archlinuxarm.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-14 21:32:55 +07:00
kirkwood-pogoplug-series-4.dtb \
ARM: Kirkwood: Add DT description of rd88f6192. Mechanically translate rd88f6192-nas-setup.c into DT equivelent. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-15 19:59:52 +07:00
kirkwood-rd88f6192.dtb \
ARM: Kirkwood: Fix DT based DSA. During the conversion of boards to use DT to instantiate Distributed Switch Architecture, nobody volunteered to test. As to be expected, the conversion was flawed. Testers and access to hardware has now become available, and this patch hopefully fixes the problems. dsa,mii-bus must be a phandle to the top level mdio node, not the port specific subnode of the mdio device. dsa,ethernet must be a phandle to the port subnode within the ethernet DT node, not the ethernet node. Don't pinctrl hog the card detect gpio for mvsdio. Rename the .dts files to make it clearer which file is for the Z0 stepping and which for the A0 or later stepping. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: seugene@marvell.com Tested-by: Eugene Sanivsky <seugene@marvell.com> Fixes: e2eaa339af44: ("ARM: Kirkwood: convert rd88f6281-setup.c to DT.") Fixes: e7c8f3808be8: ("ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT") Cc: <stable@vger.kernel.org> #v3.15+ Link: https://lkml.kernel.org/r/1409592941-22244-1-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-09-02 00:35:41 +07:00
kirkwood-rd88f6281-z0.dtb \
kirkwood-rd88f6281-a.dtb \
ARM: Kirkwood: Add support for many Synology NAS devices Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <andrew@lunn.ch> translation of the board setup file maintained by Ben Peddell <klightspeed@killerwolves.net> The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC. Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43. Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply. Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Tested-by: Ben Peddell <klightspeed@killerwolves.net> (ds211j) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-20 03:02:37 +07:00
kirkwood-rs212.dtb \
kirkwood-rs409.dtb \
kirkwood-rs411.dtb \
ARM: Kirkwood: Add dts files for Sheevaplug and eSATA Sheevaplug Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-14 04:19:00 +07:00
kirkwood-sheevaplug.dtb \
kirkwood-sheevaplug-esata.dtb \
ARM: kirkwood: Add dts file describing HP T5325 thin client Describe the T5325 using device tree properties, where possible. The first version of this file was produced by Thomas Petazzoni. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-26 00:34:02 +07:00
kirkwood-t5325.dtb \
ARM: Kirkwood: new board USI Topkick This is a new kirkwood box made by Universal Scientific Industrial, Inc. The product description is here: http://www.usish.com/english/products_topkick1281p2.php It is very similar to the dreamplug and other plug devices, with the exception that it has room for a 2.5" SATA HDD internally. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2012-10-22 09:15:35 +07:00
kirkwood-topkick.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
kirkwood-ts219-6281.dtb \
ARM: Kirkwood: Add DT description of QNAP 419 Re-implement the Marvell Kirkwood ts41x-setup.c in DT. As with the QNAP 119, there are two variants, depending on which SoC has been used. They differ on Ethernet PHY addresses and number of PCIe busses. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Ian Campbell <ijc@hellion.org.uk> (kirkwood-ts419-6281.dtb) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-01-07 05:49:17 +07:00
kirkwood-ts219-6282.dtb \
kirkwood-ts419-6281.dtb \
kirkwood-ts419-6282.dtb
ARM: dts: Add DT for Embedded Artists LPC4357 Developers Kit Adds basic support for Embedded Artists' LPC4357 Developer's Kit. Board features a LPC4357 Soc, 32 MB SDRAM, 128 MB NAND Flash, 16 MB SPI Flash, USB and Ethernet. More information can be found on: http://www.embeddedartists.com/products/kits/lpc4357_kit.php Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-12 05:00:51 +07:00
dtb-$(CONFIG_ARCH_LPC18XX) += \
ARM: dts: add DT for CIAA LPC4337 industrial computer Add basic support for CIAA (Argentine Open Industrial Computer) LPC4337 board. This commit enables the following peripherals: * UART * SSP * Ethernet Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2015-06-02 08:57:16 +07:00
lpc4337-ciaa.dtb \
ARM: dts: Add DT for Hitex LPC4350 Evaluation Board Add basic support for Hitex LPC4350 Evaluation Board. Board features a LPC4350 Soc, 8 MB SDRAM, 8 MB SPI Flash, USB and Ethernet. More information can be found on: http://www.hitex.com/index.php?id=3212 Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@gmail.com> Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-12 05:00:52 +07:00
lpc4350-hitex-eval.dtb \
ARM: dts: Add DT for Embedded Artists LPC4357 Developers Kit Adds basic support for Embedded Artists' LPC4357 Developer's Kit. Board features a LPC4357 Soc, 32 MB SDRAM, 128 MB NAND Flash, 16 MB SPI Flash, USB and Ethernet. More information can be found on: http://www.embeddedartists.com/products/kits/lpc4357_kit.php Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-12 05:00:51 +07:00
lpc4357-ea4357-devkit.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_LPC32XX) += \
ARM: dts: lpc32xx: ea3250: add SoC name prefix to board dts file To simplify matching of DTS files of all NXP LPC32xx powered boards by a file name add 'lpc3250' prefix to Embedded Artists LPC3250 board dts file. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-27 04:10:31 +07:00
lpc3250-ea3250.dtb \
ARM: dts: lpc32xx: phy3250: add SoC name prefix to board dts file To simplify matching of DTS files of all NXP LPC32xx powered boards by a file name add 'lpc3250' prefix to PHYTEC PHYCORE-LPC3250 board dts file. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-27 04:10:34 +07:00
lpc3250-phy3250.dtb
arm: dts: modify Makefile NPCM750 configuration name Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-04 18:11:01 +07:00
dtb-$(CONFIG_ARCH_NPCM7XX) += \
arm: dts: add Nuvoton NPCM750 device tree Add a common device tree for all Nuvoton NPCM750 BMCs and a board specific device tree for the NPCM750 (Poleg) evaluation board. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Avi Fishman <avifishman70@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Tomer Maimon <tmaimon77@gmail.com> Tested-by: Avi Fishman <avifishman70@gmail.com> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-17 21:20:09 +07:00
nuvoton-npcm750-evb.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_MACH_MESON6) += \
meson6-atv1200.dtb
ARM: dts: meson: add DTS file for MINIX NEO-X8 Add a DTS file for MINIX NEO-X8, a Meson8-based digital media player. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Carlo Caione <carlo@endlessm.com>
2015-03-02 01:19:26 +07:00
dtb-$(CONFIG_MACH_MESON8) += \
ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus The Tronsmart MXIII Plus is an Android TV box which uses the Amlogic S812 (Meson8m2) SoC. It uses a Realtek RTL8211F RGMII Ethernet PHY as well as a Ricoh RN5T618 system power controller. It also comes with an Ampak AP6330 SDIO wifi/Bluetooth combo chip (support for wifi and Bluetooth is currently not added because the Linux drivers currently only support one MMC controller and that is used for the SD card). Signed-off-by: Oleg Ivanov <balbes-150@yandex.ru> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-05-10 06:50:37 +07:00
meson8-minix-neo-x8.dtb \
ARM: dts: meson: build the Meson8b .dtbs with MACH_MESON8 Currently there are two identical Kconfig options where only differences are the Kconfig help text and the list of .dtbs that are built: - MACH_MESON8 - MACH_MESON8B Build the Meson8b .dtbs when MACH_MESON8 is selected to get rid of the latter Kconfig symbol later. Suggested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-05-21 00:23:52 +07:00
meson8b-mxq.dtb \
meson8b-odroidc1.dtb \
ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus The Tronsmart MXIII Plus is an Android TV box which uses the Amlogic S812 (Meson8m2) SoC. It uses a Realtek RTL8211F RGMII Ethernet PHY as well as a Ricoh RN5T618 system power controller. It also comes with an Ampak AP6330 SDIO wifi/Bluetooth combo chip (support for wifi and Bluetooth is currently not added because the Linux drivers currently only support one MMC controller and that is used for the SD card). Signed-off-by: Oleg Ivanov <balbes-150@yandex.ru> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-05-10 06:50:37 +07:00
meson8m2-mxiii-plus.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_MMP) += \
pxa168-aspenite.dtb \
arm: mmp: Make all the dts file to be compiled by Makefile Add items in arch/arm/boot/dt/Makefile to compile the dtb for mach-mmp. Change the dts and dtsi file to use #include instead of \include\ Signed-off-by: Chao Xie <chao.xie@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-10-31 09:13:52 +07:00
pxa910-dkb.dtb \
mmp2-brownstone.dtb
ARM: dts: introduce MPS2 AN399/AN400 Application Notes 399 and 400 shares the same memory map and features. Both are shipped with Cortex-M7 and have the same peripheral as AN385/AN386, but with different location of PSRAM and Ethernet controller. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-04-25 15:49:16 +07:00
dtb-$(CONFIG_ARCH_MPS2) += \
mps2-an385.dtb \
mps2-an399.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_MOXART) += \
moxart-uc7112lx.dtb
dtb-$(CONFIG_SOC_IMX1) += \
ARM: i.MX: dts: Add support for the Freescale i.MX1 ADS board This patch adds support for the Freescale (Motorola) i.MX1 ADS board. This change is intended to further remove non-DT support for this board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-19 13:33:47 +07:00
imx1-ads.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
imx1-apf9328.dtb
dtb-$(CONFIG_SOC_IMX25) += \
ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard. The following devices/functionalities were added: * Main and secondary UARTs. * i2c and the pcf8563 device. * Ethernet. * NAND. * The BP1 button. * The LED. * Watchdog * SD. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-05 21:56:56 +07:00
imx25-eukrea-mbimxsd25-baseboard.dtb \
ARM: dts: imx25: mbimxsd25: Add displays support. The CMO-QVGA, DVI-VGA and DVI-SVGA displays were added. Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-22 21:00:43 +07:00
imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
ARM: dts: add missing imx dtb targets Add missing imx dtb targets, so that make dtbs can cover all imx dtbs. It's pretty useful for testing dts changes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 10:30:59 +07:00
imx25-karo-tx25.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
imx25-pdk.dtb
ARM: dts: fix imx27 dtb build rule The i.MX27 dtb build should be controlled by CONFIG_SOC_IMX27 rather than CONFIG_SOC_IMX31. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Fixes: cb612390e546 ("ARM: dts: Only build dtb if associated Arch and/or SoC is enabled") Cc: <stable@vger.kernel.org>
2015-05-19 21:06:41 +07:00
dtb-$(CONFIG_SOC_IMX27) += \
ARM: dts: add missing imx dtb targets Add missing imx dtb targets, so that make dtbs can cover all imx dtbs. It's pretty useful for testing dts changes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 10:30:59 +07:00
imx27-apf27.dtb \
ARM: imx: Add support for the Armadeus Systems APF27Dev docking board The APF27Dev is a docking board for an APF27 SOM Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-27 20:41:58 +07:00
imx27-apf27dev.dtb \
ARM: dts: Add support for the cpuimx27 board from Eukrea and its baseboard This patch adds support for the cpuimx27 board from Eukrea and its baseboard. This change is intended to further remove non-DT support for this board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-13 21:48:15 +07:00
imx27-eukrea-mbimxsd27-baseboard.dtb \
ARM: dts: add missing imx dtb targets Add missing imx dtb targets, so that make dtbs can cover all imx dtbs. It's pretty useful for testing dts changes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 10:30:59 +07:00
imx27-pdk.dtb \
ARM: dts: imx27-phytec-phycore-som: Add initial support for PCM970 RDK Patch adds initial dts for Phytec PCM970 Rapid development kit. - Added definition for UART0 and UART1. - Added additional SPI chipselect which used on RDK for ZegBee module. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-01 12:54:13 +07:00
imx27-phytec-phycore-rdk.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
imx27-phytec-phycard-s-rdk.dtb
dtb-$(CONFIG_SOC_IMX31) += \
imx31-bug.dtb
dtb-$(CONFIG_SOC_IMX35) += \
ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard. The following devices/functionalities were added: * Main and secondary UARTs. * i2c and the pcf8563 device. * Ethernet. * NAND. * The BP1 button. * The LED. * Watchdog * SD. Cc: Eric Bénard <eric@eukrea.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-15 23:32:12 +07:00
imx35-eukrea-mbimxsd35-baseboard.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
imx35-pdk.dtb
dtb-$(CONFIG_SOC_IMX50) += \
imx50-evk.dtb
dtb-$(CONFIG_SOC_IMX51) += \
ARM: dts: Add apf51 basic support Signed-off-by: Laurent Cans <laurent.cans@gmail.com> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-21 05:55:29 +07:00
imx51-apf51.dtb \
ARM: imx: Add support for the Armadeus Systems APF51Dev docking board The APF51Dev is a docking board for an APF51 SOM Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-08 14:41:38 +07:00
imx51-apf51dev.dtb \
ARM: boot: dts: Add an entry for imx27-pdk.dtb Add an entry for imx27-pdk.dtb, so that it can be generated by default. Also, add an entry into Documentation/devicetree/bindings/arm/fsl.txt. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-25 18:10:52 +07:00
imx51-babbage.dtb \
ARM i.MX51: Add Digi ConnectCore devicetree This patch adds support for Digi ConnectCore® i.MX51/Wi-i.MX51 SOM and basic support for the ConnectCore for i.MX51 JumpStart Kit. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-12 12:29:05 +07:00
imx51-digi-connectcore-jsk.dtb \
ARM: dts: TS-4800: add basic device tree This device tree adds support for TS-4800 by Technologic Systems. This board is based on MX51-babbage, but there are some subtle differences in the pins used, and there is an additional FPGA that is memory-mapped. More details here: http://wiki.embeddedarm.com/wiki/TS-4800 Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-12 00:08:14 +07:00
imx51-eukrea-mbimxsd51-baseboard.dtb \
ARM: dts: imx: add ZII RDU1 board This adds support for the Zodiac Inflight Innovations RDU1 board, which is based on the i.MX51. It is the predecessor of the already supported ZII RDU2 board and relies on the bootloader in the same way to enable correct display and touchscreen nodes. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-19 00:26:18 +07:00
imx51-ts4800.dtb \
imx51-zii-rdu1.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_IMX53) += \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx53-ard.dtb \
ARM: dts: imx: add CX9020 Embedded PC device tree The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - no SATA connector - CCAT FPGA connected to emi - enable rtc Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-26 19:05:34 +07:00
imx53-cx9020.dtb \
ARM: mx5: Add support for DENX M53EVK This patch adds support for the DENX M53EVK board. The board currently supports NAND, Ethernet, UART, CAN, I2C. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-23 04:23:47 +07:00
imx53-m53evk.dtb \
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 17:27:27 +07:00
imx53-mba53.dtb \
ARM: dts: imx53: Add GE Healthcare PPD PPD is a product from GE Healthcare to monitor vital biometric signals. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-18 22:53:48 +07:00
imx53-ppd.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx53-qsb.dtb \
ARM: dts: i.MX53: add support for MCIMX53-START-R The "Start-R QSB" has a different PMIC than the older "Start QSB". Add a new devicetree for the Start-R. They both could use the same DT, as both PMICs (the dialog and the mc34708) have different i2c addresses and could coexist in the same DT without any errors. But once phandles are used, this will get messy. The pmic nodes are based on an earlier patch [PATCH] arm: imx53-qsb: Add Ripley driver DT nodes from Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> which apparently got lost/abandoned. I added phandles/newlines and changed the node name from ripley to mc34708. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-10 19:52:59 +07:00
imx53-qsrb.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx53-smd.dtb \
ARM: dts: imx53: add support for Ka-Ro TX53 modules This patch adds support for the Ka-Ro electronics GmbH TX53 modules. There are two distinct module types. One with an LVDS display interface and SATA support, the other with a parallel LCD interface and no SATA interface. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-18 15:18:38 +07:00
imx53-tx53-x03x.dtb \
imx53-tx53-x13x.dtb \
ARM: dts: imx53: add support for USB armory board Add support for Inverse Path USB armory board, an open source flash-drive sized computer based on NXP i.MX53 SoC. https://inversepath.com/usbarmory Signed-off-by: Andrej Rosano <andrej@inversepath.com> Tested-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-05 17:11:17 +07:00
imx53-usbarmory.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
imx53-voipac-bsb.dtb
dtb-$(CONFIG_SOC_IMX6Q) += \
ARM: dts: Armadeus Systems APF6 family support (i.MX6) Add support to the Armadeus Systems APF6 Solo / Dual / Quad SoM and the Armadeus Systems APF6Dev carrier board. For more details see: http://www.armadeus.com/english/products-processor_boards-apf6.html http://www.armadeus.com/english/products-development_boards-apf6_dev.html Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-15 20:44:27 +07:00
imx6dl-apf6dev.dtb \
ARM: dts: imx6: add aristainetos board support This patch add support for the imx6dl based aristainetos board with following configuration: CPU: Freescale i.MX6DL rev1.1 at 792 MHz DRAM: 1 GiB NAND: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB As this board can used with 2 different display types, the differences between them are extracted into 2 DTS files, and the common settings are collected in a common file. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-20 21:52:47 +07:00
imx6dl-aristainetos_4.dtb \
imx6dl-aristainetos_7.dtb \
ARM: dts: imx6: add DT for aristainetos2 board This patch adds support for the imx6dl based aristainetos2 board with following configuration: CPU: Freescale i.MX6DL rev1.1 at 792 MHz MReset cause: POR MBoard: aristaitenos2 DRAM: 1 GiB NAND: 1024 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16 MiB Display: lb07wv8 (800x480) As this board can be used with 2 different display types, the differences between them are extracted into 2 DTS files, and the common settings are collected in a common file. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-05-26 11:06:26 +07:00
imx6dl-aristainetos2_4.dtb \
imx6dl-aristainetos2_7.dtb \
ARM: dts: imx6: Add support for Toradex Colibri iMX6 module Add support for Toradex Colibri iMX6 module. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-21 18:24:38 +07:00
imx6dl-colibri-eval-v3.dtb \
ARM: imx: initial SolidRun Cubox-i support Add support for the SolidRun Cubox-i devices. This commit adds similar basic support as the HummingBoard. Further devices will be supported in future patches. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-16 23:12:38 +07:00
imx6dl-cubox-i.dtb \
ARM: dts: imx6qdl: SolidRun: add v1.5 som with eMMC Add Cubox-i and Hummingboard variants for v1.5 SOMs, where the SOM has eMMC fitted. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-11-28 22:03:11 +07:00
imx6dl-cubox-i-emmc-som-v15.dtb \
ARM: dts: imx6qdl: SolidRun: add v1.5 som without eMMC Add Cubox-i and Hummingboard variants for v1.5 SOMs, which have TI Wi-Fi instead of Broadcom Wi-Fi. This variant does not include SOM eMMC support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-11-28 22:03:06 +07:00
imx6dl-cubox-i-som-v15.dtb \
ARM: dts: imx6: Add DFI FS700-M60 board support The DFI FS700-M60 is a q7 board with i.MX6 quad, dual, duallite or solo SoC. This adds support for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-18 15:41:30 +07:00
imx6dl-dfi-fs700-m60.dtb \
ARM: dts: add Gateworks Ventana support The Gateworks Ventana product family consists of several baseboard designs based on the Freescale i.MX6 family of processors. Each baseboard has a different set of possible features. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-07 14:24:56 +07:00
imx6dl-gw51xx.dtb \
imx6dl-gw52xx.dtb \
imx6dl-gw53xx.dtb \
imx6dl-gw54xx.dtb \
ARM: dts: Gateworks GW5510 support (i.MX6) Add support for the Gateworks GW5510 board featuring: * i.MX6 SoC * up to 512MB DDR3 * up to 2GB NAND flash * 1x miniPCIe socket (with USB) * HDMI out (micro-HDMI) * HDMI in (micro-HDMI) (currently supported by only vendor kernel) * TTL level I/O (supported by GW16111 breakout board): * I2C * 2x UART * CAN * 2x DIO (GPIO/PWM) * USB OTG For more details see: http://www.gateworks.com/product/item/ventana-gw5510-single-board-computer Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-07 22:38:00 +07:00
imx6dl-gw551x.dtb \
ARM: dts: Gateworks GW5520 support (i.MX6) Add support for the Gateworks GW5520 board. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-23 04:52:54 +07:00
imx6dl-gw552x.dtb \
ARM: dts: imx: add Gateworks Ventana GW553x support The Gateworks Ventana GW553x is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * small form factor (35x70mm) * 512MB DDR3 DRAM (2x32bit) (options up to 2GB) * 256MB NAND flash (4GB option) * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * 1x miniPCI socket (with PCIe, USB, SIM) * 1x microSD socket * 1x SIM socket * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) * analog CVBS video in * GPS (optional uBlox EVA-M8M) * Application headers: - 2x TTL UART (TX/RX) - 4x TTL GPIO (3x configurable as PWM) - 3x CVBS Analog video input (1x decoder with 3x selectable inputs) * Front panel connectors: - micro-HDMI audio/video out - 1x user programmable LED - 1x configurable user pushbutton - 1x USB OTG See http://www.gateworks.com for more info Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-10 01:49:07 +07:00
imx6dl-gw553x.dtb \
ARM: dts: imx: add Gateworks Ventana GW5600 support The Gateworks Ventana GW5600 is a media-centric single-board computer based on the NXP IMX6 SoC with the following features: * PoE (emulated 802.3af) * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * 1GiB DDR3 DRAM (supports up to 4GiB) * 8GB eMMC * 1x microSD connector * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * 1x bi-color USER LED * 1x front-panel pushbutton * 1x front-panel GbE * 2x front panel USB 2.0 * 1x front panel USB OTG * 1x SIM socket * 1x miniPCIe socket with SATA (mSATA) * 1x miniPCIe socket with USB 2.0 (Modem) * 1x miniPCIe socket with PCIe, USB 2.0, and SIM * RS232/RS485 serial - 2x RS232 UARTs (off-board connector) - 1x RS485 (loading option) * 4x digital I/O signals (PWM/I2C/GPIO/5V/3.3V options) * 1x analog input (0 to 5V) * 1x CAN (loading option) * off-board LVDS: - I2C - 12V - LED driver (4x 330mA strings) - matrix keypad controller (8row x 10col) - I2S - dual-channel LVDS - PWM * off-board video input: - 16bit parallel / MIPI (IPU1_CSI0) * GPS (loading option) * Analog Video Input (CVBS) 3 inputs (1 active at a time) * Analog Audio Input/Output (2ch Line level, optional MIC/HP drivers) * HDMI out * JTAG programmable * Inertial Module Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-03 00:39:37 +07:00
imx6dl-gw560x.dtb \
ARM: dts: imx: add Gateworks Ventana GW5903 support The Gateworks Ventana GW5903 is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * 4GiB DDR3 DRAM * 32GB eMMC * 1x microSD connector * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * Inertial Module * uBlox EMMY-W1 (bluetooth/nfc/802.11ac) Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-04 04:18:21 +07:00
imx6dl-gw5903.dtb \
ARM: dts: imx: add Gateworks Ventana GW5904 support The Gateworks Ventana GW5904 is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * 2048MB DDR3 DRAM (4x64bit) (options up to 4GiB) * 8GB eMMC * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * 1x miniPCIe socket (with PCIe, USB) * 1x miniPCIe socket (USB) * 1x M.2 socket (USB, 2x SIM) * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) * GPS (optional uBlox EVA-M8M) * Application headers: - 2x RS232 UART (TX/RX/CTS/RTS) - 8x TTL GPIO (3x configurable as PWM) - 1x LVDS display 3D+C with i2c touch and PWM backlight * MV88E6176 GbE Switch (uplink to IMX FEC) * Front panel connectors: - 1x user programmable LED - 1x configurable user pushbutton - 1x USB OTG - 4x GbE LAN Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-16 21:27:19 +07:00
imx6dl-gw5904.dtb \
ARM: imx: initial SolidRun HummingBoard support Add support for the SolidRun HummingBoard. This commit adds support for the following interfaces on this board: - Consumer Ir receiver - S/PDIF output - Both USB interfaces - Gigabit Ethernet using AR8035 - UART port Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-28 02:07:26 +07:00
imx6dl-hummingboard.dtb \
ARM: dts: imx6qdl: SolidRun: add v1.5 som with eMMC Add Cubox-i and Hummingboard variants for v1.5 SOMs, where the SOM has eMMC fitted. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-11-28 22:03:11 +07:00
imx6dl-hummingboard-emmc-som-v15.dtb \
ARM: dts: imx6qdl: SolidRun: add v1.5 som without eMMC Add Cubox-i and Hummingboard variants for v1.5 SOMs, which have TI Wi-Fi instead of Broadcom Wi-Fi. This variant does not include SOM eMMC support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-11-28 22:03:06 +07:00
imx6dl-hummingboard-som-v15.dtb \
ARM: dts: imx6qdl: add HummingBoard2 boards This adds support for the Hummingboard Gate and Edge devices from SolidRun. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-11 23:57:22 +07:00
imx6dl-hummingboard2.dtb \
ARM: dts: imx6qdl-hummingboard2: add v1.5 som with eMMC Add support for the v1.5 SOM with TI Wi-Fi and eMMC. As the pinmux settings are different for the microsom, we need to use a separate board-level dts for this as there is no support for overlays. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-11 23:58:54 +07:00
imx6dl-hummingboard2-emmc-som-v15.dtb \
ARM: dts: imx6qdl-hummingboard2: add v1.5 som without eMMC Add support for the v1.5 SOM with TI Wi-Fi but without eMMC. As the pinmux settings are different for the microsom, we need to use a separate board-level dts for this as there is no support for overlays. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-11 23:58:49 +07:00
imx6dl-hummingboard2-som-v15.dtb \
ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support i.CoreM6 DualLite/Solo modules are system on module solutions manufactured by Engicam with following characteristics: CPU NXP i.MX6 DL, 800MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB Power supply Single 5V MAX LCD RES FULLHD and more info at http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-21 15:05:52 +07:00
imx6dl-icore.dtb \
ARM: dts: imx6dl: Add Engicam i.CoreM6 DualLite/Solo RQS initial support i.CoreM6 DualLite/Solo modules are system on module solutions manufactured by Engicam with following characteristics: CPU NXP i.MX6 DL, 800MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB Power supply Single 5V MAX LCD RES FULLHD and more info at http://www.engicam.com/en/products/embedded/som/standard/i-core-rqs-m6s-dl-d-q Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-02 20:40:18 +07:00
imx6dl-icore-rqs.dtb \
ARM: dts: i.MX6: Add BTicino i.MX6DL Mamoj initial support This patch adds initial support for BTicino i.MX6DL Mamoj board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-20 02:41:14 +07:00
imx6dl-mamoj.dtb \
ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Based on an i.MX6 Solo with 512MB DDR3. http://boundarydevices.com/product/nitrogen6_lite/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-09-30 20:46:46 +07:00
imx6dl-nit6xlite.dtb \
ARM: dts: imx: add nitrogen6x board Add file imx6q-nitrogen6x.dts, imx6dl-nitrogen6x.dts, imx6qdl-nitrogen6x.dtsi And add board to makefile. Eric Nelson created a web page to show the differences between Nitrogen6x and Sabre Lite boards. http://boundarydevices.com/differences-sabre-lite-nitrogen6x Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-17 08:13:03 +07:00
imx6dl-nitrogen6x.dtb \
ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6 DualLight/Solo RDK Add support for the PHYTEC phyBOARD-Mira Low-Cost Rapid Development Kit with i.MX 6DualLight/Solo with NAND. Following interfaces are supported: - 100 MBit Ethernet - USB Host - RS232 - HDMI Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-01-09 23:09:58 +07:00
imx6dl-phytec-mira-rdk-nand.dtb \
ARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo The PBA-B-01 carrier board can be equipped with either Quad or DualLite/Solo phyFLEX i.MX6 modules (PFL-A-02). This moves all common devices into imx6qdl-phytec-pbab01.dtsi. The SoC specific device trees then just include the pfla01 and pbab01 dtsi files corresponding to the SoC variant. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14 22:37:24 +07:00
imx6dl-phytec-pbab01.dtb \
ARM: dts: add initial Rex Basic board support Add initial Rex Pro i.mx6dl board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6dl-rex-basic.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-08 21:49:23 +07:00
imx6dl-rex-basic.dtb \
ARM: dts: imx6: add new board RIoTboard add element14s RIoTboard http://www.riotboard.org which is an i.MX6Solo based design targeted at makers. Signed-off-by: Iain Paton<ipaton0@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-09 22:02:11 +07:00
imx6dl-riotboard.dtb \
ARM: dts: imx: add initial imx6dl-sabreauto support Add initial imx6dl-sabreauto support based on the common stuff already in imx6qdl-sabreauto.dtsi. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-02 13:38:11 +07:00
imx6dl-sabreauto.dtb \
ARM: dts: imx: sabrelite: add Dual Lite/Solo support This makes the structure of Sabre Lite board files the same as Sabre SD board files so that they are easier to compare. By this, I mean that the majority of the file imx6q-sabrelite.dts is moved to imx6qdl-sabrelite.dtsi so that both imx6q-sabrelite.dts and imx6dl-sabrelite.dts can include it. Now Sabre Lite has support for Dual Lite/Solo processors. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-13 08:49:05 +07:00
imx6dl-sabrelite.dtb \
ARM: dts: imx: add initial imx6dl-sabresd support Add initial imx6dl-sabresd support based on the common stuff already in imx6qdl-sabresd.dtsi. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-02 13:04:45 +07:00
imx6dl-sabresd.dtb \
ARM: dts: imx6: Support Savageboard dual Common savageboard DT file is used for board support. Add the vendor name and specify the dtb file for i.MX6Q build. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-04 14:04:36 +07:00
imx6dl-savageboard.dtb \
ARM: dts: TS-4900: add basic device tree These device trees add support for TS-4900 by Technologic Systems. More details here: http://wiki.embeddedarm.com/wiki/TS-4900 Signed-off-by: Lucile Quirion <lucile.quirion@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-09 22:15:44 +07:00
imx6dl-ts4900.dtb \
ARM: dts: TS-7970: add basic device tree These device trees add support for TS-7970 by Technologic Systems. More details here: https://wiki.embeddedarm.com/wiki/TS-7970 Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-07 23:05:50 +07:00
imx6dl-ts7970.dtb \
ARM: dts: imx6: add support for Ka-Ro TX6 modules This patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are five distinct module types with either i.MX6Q or i.MX6DL and LVDS or LCD display interface and one DTS file for a complete system with an i.MX6DL based TX6 module and a baseboard mounted on the back of a display (imx6dl-tx6dl-comtft.dts). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-12 20:05:17 +07:00
imx6dl-tx6dl-comtft.dtb \
ARM: dts: imx6: add support for more Ka-Ro electronics modules Add support for the following i.MX6 based modules from Ka-Ro electronics GmbH: TX6S-8034: Processor Freescale i.MX 6 Solo, 800MHz RAM 256MiB DDR3 SDRAM ROM 128MiB NAND Flash Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6S-8035: Processor Freescale i.MX 6 Solo, 800MHz RAM 512MiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6U-8033: Processor Freescale i.MX 6 Dual Lite, 800MHz RAM 1GiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6Q-1036: Processor Freescale i.MX 6Quad, 1GHz RAM 1GB DDR3 SDRAM 64-bit ROM 8GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range Extended Consumer Grade (-20°C to 105°C Tj) Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-31 19:33:44 +07:00
imx6dl-tx6s-8034.dtb \
ARM: dts: imx: add support for TX6 modules on MB7 baseboard Create .dts files for various Ka-Ro electronics TX modules on the MB7 baseboard. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-17 16:18:03 +07:00
imx6dl-tx6s-8034-mb7.dtb \
ARM: dts: imx6: add support for more Ka-Ro electronics modules Add support for the following i.MX6 based modules from Ka-Ro electronics GmbH: TX6S-8034: Processor Freescale i.MX 6 Solo, 800MHz RAM 256MiB DDR3 SDRAM ROM 128MiB NAND Flash Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6S-8035: Processor Freescale i.MX 6 Solo, 800MHz RAM 512MiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6U-8033: Processor Freescale i.MX 6 Dual Lite, 800MHz RAM 1GiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6Q-1036: Processor Freescale i.MX 6Quad, 1GHz RAM 1GB DDR3 SDRAM 64-bit ROM 8GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range Extended Consumer Grade (-20°C to 105°C Tj) Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-31 19:33:44 +07:00
imx6dl-tx6s-8035.dtb \
ARM: dts: imx: add support for TX6 modules on MB7 baseboard Create .dts files for various Ka-Ro electronics TX modules on the MB7 baseboard. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-17 16:18:03 +07:00
imx6dl-tx6s-8035-mb7.dtb \
ARM: dts: imx6: add support for Ka-Ro TX6 modules This patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are five distinct module types with either i.MX6Q or i.MX6DL and LVDS or LCD display interface and one DTS file for a complete system with an i.MX6DL based TX6 module and a baseboard mounted on the back of a display (imx6dl-tx6dl-comtft.dts). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-12 20:05:17 +07:00
imx6dl-tx6u-801x.dtb \
ARM: dts: imx: add support for TX6 modules on MB7 baseboard Create .dts files for various Ka-Ro electronics TX modules on the MB7 baseboard. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-17 16:18:03 +07:00
imx6dl-tx6u-80xx-mb7.dtb \
ARM: dts: imx6: add support for more Ka-Ro electronics modules Add support for the following i.MX6 based modules from Ka-Ro electronics GmbH: TX6S-8034: Processor Freescale i.MX 6 Solo, 800MHz RAM 256MiB DDR3 SDRAM ROM 128MiB NAND Flash Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6S-8035: Processor Freescale i.MX 6 Solo, 800MHz RAM 512MiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6U-8033: Processor Freescale i.MX 6 Dual Lite, 800MHz RAM 1GiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6Q-1036: Processor Freescale i.MX 6Quad, 1GHz RAM 1GB DDR3 SDRAM 64-bit ROM 8GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range Extended Consumer Grade (-20°C to 105°C Tj) Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-31 19:33:44 +07:00
imx6dl-tx6u-8033.dtb \
ARM: dts: imx: add support for TX6 modules on MB7 baseboard Create .dts files for various Ka-Ro electronics TX modules on the MB7 baseboard. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-17 16:18:03 +07:00
imx6dl-tx6u-8033-mb7.dtb \
ARM: dts: imx6: add support for Ka-Ro TX6 modules This patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are five distinct module types with either i.MX6Q or i.MX6DL and LVDS or LCD display interface and one DTS file for a complete system with an i.MX6DL based TX6 module and a baseboard mounted on the back of a display (imx6dl-tx6dl-comtft.dts). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-12 20:05:17 +07:00
imx6dl-tx6u-811x.dtb \
ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard This baseboard can be used with all TX6 SoMs, but only a certain set of combinations can be ordered by default. Add support for these combinations in mainline, so that users can easily adopt their own combination of SoM and baseboard themselves. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-31 19:33:45 +07:00
imx6dl-tx6u-81xx-mb7.dtb \
ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo For more information about the Udoo boards: http://www.udoo.org/ Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-12-23 00:29:21 +07:00
imx6dl-udoo.dtb \
ARM: dts: Add initial support for Wandboard Dual-Lite Wandboard is a development board that has two variants: one version based on mx6 dual lite and another one based on mx6 solo. For more details about Wandboard, please refer to: http://www.wandboard.org/ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-03 19:29:16 +07:00
imx6dl-wandboard.dtb \
ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. The rev C1 Wandboard uses the Broadcom 4330 for WiFi and Bluetooth instead of the 4329. This changes the PADS assigned for the control lines. Another side effect of the change is that on the rev C1 board, usdhc driver can't detect the chip presence correctly so usdhc2 now needs its 'non-removeable' property removed. So that rev B1 and earlier can continue to work, this patch splits the board-specific definitions from imx6qdl-wandboard.dtsi into imx6qdl-wandboard-revb1.dtsi and imx6qdl-wandboard-revc1.dtsi. The new files include the original base imx6qdl-wandboard.dtsi which retains the common definitions. The existing imx6dl-wandboard.dts includes imx6qdl-wandboard-revc1.dtsi and imx6dl-wandboard-revb1.dts (new) includes imx6qdl-wandboard-revb1.dtsi. This makes the rev C1 board the new default. The same pattern is used for imx6q-wandboard.dts. So, from U-Boot on a WB-Quad you use imxq-wandboard-revb1.dtb for the older B1 board and imxq-wandboard.dtb for the current rev C1 board. Signed-off-by: George Joseph <george.joseph@fairview5.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-09 01:48:16 +07:00
imx6dl-wandboard-revb1.dtb \
ARM: dts: imx6qdl-wandboard: Add support for the revd1 variants Latest wandboard hardware revision is revd1, which brings the following new features: - PFUZE100 PMIC - AR8035 Ethernet PHY - Upgrade Wifi/BT chip to BCM4339/BCM43430. Add support for the mx6, mx6dl and mx6qp revd1 variants. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-14 19:43:22 +07:00
imx6dl-wandboard-revd1.dtb \
ARM: dts: imx6q-apalis-eval: add support for Apalis Evaluation Board Add support for the Toradex Apalis Evaluation Board. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-07 14:22:42 +07:00
imx6q-apalis-eval.dtb \
ARM: dts: imx6: Add support for Toradex Ixora carrier board Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-05 23:12:21 +07:00
imx6q-apalis-ixora.dtb \
ARM: dts: imx6: add support for Toradex Ixora V1.1 carrier board Add support for the Toradex Ixora V1.1 carrier board. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-07 14:22:41 +07:00
imx6q-apalis-ixora-v1.1.dtb \
ARM: dts: Armadeus Systems APF6 family support (i.MX6) Add support to the Armadeus Systems APF6 Solo / Dual / Quad SoM and the Armadeus Systems APF6Dev carrier board. For more details see: http://www.armadeus.com/english/products-processor_boards-apf6.html http://www.armadeus.com/english/products-development_boards-apf6_dev.html Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-15 20:44:27 +07:00
imx6q-apf6dev.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx6q-arm2.dtb \
ARM: dts: imx: Add support for Advantech/GE B450v3 Add support for Advantech/GE B450v3 board. Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-20 06:35:29 +07:00
imx6q-b450v3.dtb \
ARM: dts: imx: Add support for Advantech/GE B650v3 Add support for Advantech/GE B650v3 board. Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-20 06:35:30 +07:00
imx6q-b650v3.dtb \
ARM: dts: imx: Add support for Advantech/GE B850v3 Add support for Advantech/GE B850v3 board. Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-20 06:35:31 +07:00
imx6q-b850v3.dtb \
ARM: dts: Add initial support for cm-fx6. Add initial support for cm-fx6 module. cm-fx6 is a module based on mx6q SoC with the following features: - Up to 4GB of DDR3 - 1 LCD/DVI output port - 1 HDMI output port - 2 LVDS LCD ports - Gigabit Ethernet - Analog Audio - CAN - SATA - NAND - PCIE This patch allows to boot up the module, configures the serial console, the Ethernet adapter and the heartbeat led. cm-fx6 is embedded inside the Utilite computer. Signed-off-by: Valentin Raevsky <valentin@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-29 19:11:43 +07:00
imx6q-cm-fx6.dtb \
ARM: imx: initial SolidRun Cubox-i support Add support for the SolidRun Cubox-i devices. This commit adds similar basic support as the HummingBoard. Further devices will be supported in future patches. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-16 23:12:38 +07:00
imx6q-cubox-i.dtb \
ARM: dts: imx6qdl: SolidRun: add v1.5 som with eMMC Add Cubox-i and Hummingboard variants for v1.5 SOMs, where the SOM has eMMC fitted. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-11-28 22:03:11 +07:00
imx6q-cubox-i-emmc-som-v15.dtb \
ARM: dts: imx6qdl: SolidRun: add v1.5 som without eMMC Add Cubox-i and Hummingboard variants for v1.5 SOMs, which have TI Wi-Fi instead of Broadcom Wi-Fi. This variant does not include SOM eMMC support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-11-28 22:03:06 +07:00
imx6q-cubox-i-som-v15.dtb \
ARM: dts: imx6: Add DFI FS700-M60 board support The DFI FS700-M60 is a q7 board with i.MX6 quad, dual, duallite or solo SoC. This adds support for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-18 15:41:30 +07:00
imx6q-dfi-fs700-m60.dtb \
ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2 Add support for the DH i.MX6 Quad based SoM and a PDK2 evaluation board. The evaluation board features three serial ports, USB OTG, USB host with an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, mSATA, analog audio, PCIe and HDMI video output. All of the aforementioned features are supported by this patch. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-19 00:34:03 +07:00
imx6q-dhcom-pdk2.dtb \
ARM: dts: display5: Device tree description of LWN's DISPLAY5 board This commit adds device tree description of Liebherr's Display5 board. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-22 05:05:55 +07:00
imx6q-display5-tianma-tm070-1280x768.dtb \
ARM: dts: imx6: Add support for imx6q dmo edmqmx6 Signed-off-by: Silvio F <silvio.fricke@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-07 20:54:27 +07:00
imx6q-dmo-edmqmx6.dtb \
ARM: dts: imx: Add support for Advantech DMS-BA16 Add support for Advantech DMS-BA16 board, which uses the Advantech BA-16 module. Signed-off-by: Ken Lin <yungching0725@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-10 04:55:15 +07:00
imx6q-dms-ba16.dtb \
ARM: dts: Add dts for Uniwest evi Uniwest evi is a portable electrical eddy current non-destructive testing device. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-04 00:37:45 +07:00
imx6q-evi.dtb \
ARM: dts: imx6q: Add support for Zealz GK802 Add support for the GK802 'QUAD CORE Mini PC', which seems to be loosely based on the Freescale i.MX6Q HDMI dongle reference design. It is supposedly identical to the Hiapad Hi802. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-19 09:28:12 +07:00
imx6q-gk802.dtb \
ARM: dts: add Gateworks Ventana support The Gateworks Ventana product family consists of several baseboard designs based on the Freescale i.MX6 family of processors. Each baseboard has a different set of possible features. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-07 14:24:56 +07:00
imx6q-gw51xx.dtb \
imx6q-gw52xx.dtb \
imx6q-gw53xx.dtb \
imx6q-gw5400-a.dtb \
imx6q-gw54xx.dtb \
ARM: dts: Gateworks GW5510 support (i.MX6) Add support for the Gateworks GW5510 board featuring: * i.MX6 SoC * up to 512MB DDR3 * up to 2GB NAND flash * 1x miniPCIe socket (with USB) * HDMI out (micro-HDMI) * HDMI in (micro-HDMI) (currently supported by only vendor kernel) * TTL level I/O (supported by GW16111 breakout board): * I2C * 2x UART * CAN * 2x DIO (GPIO/PWM) * USB OTG For more details see: http://www.gateworks.com/product/item/ventana-gw5510-single-board-computer Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-07 22:38:00 +07:00
imx6q-gw551x.dtb \
ARM: dts: Gateworks GW5520 support (i.MX6) Add support for the Gateworks GW5520 board. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-23 04:52:54 +07:00
imx6q-gw552x.dtb \
ARM: dts: imx: add Gateworks Ventana GW553x support The Gateworks Ventana GW553x is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * small form factor (35x70mm) * 512MB DDR3 DRAM (2x32bit) (options up to 2GB) * 256MB NAND flash (4GB option) * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * 1x miniPCI socket (with PCIe, USB, SIM) * 1x microSD socket * 1x SIM socket * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) * analog CVBS video in * GPS (optional uBlox EVA-M8M) * Application headers: - 2x TTL UART (TX/RX) - 4x TTL GPIO (3x configurable as PWM) - 3x CVBS Analog video input (1x decoder with 3x selectable inputs) * Front panel connectors: - micro-HDMI audio/video out - 1x user programmable LED - 1x configurable user pushbutton - 1x USB OTG See http://www.gateworks.com for more info Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-10 01:49:07 +07:00
imx6q-gw553x.dtb \
ARM: dts: imx: add Gateworks Ventana GW5600 support The Gateworks Ventana GW5600 is a media-centric single-board computer based on the NXP IMX6 SoC with the following features: * PoE (emulated 802.3af) * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * 1GiB DDR3 DRAM (supports up to 4GiB) * 8GB eMMC * 1x microSD connector * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * 1x bi-color USER LED * 1x front-panel pushbutton * 1x front-panel GbE * 2x front panel USB 2.0 * 1x front panel USB OTG * 1x SIM socket * 1x miniPCIe socket with SATA (mSATA) * 1x miniPCIe socket with USB 2.0 (Modem) * 1x miniPCIe socket with PCIe, USB 2.0, and SIM * RS232/RS485 serial - 2x RS232 UARTs (off-board connector) - 1x RS485 (loading option) * 4x digital I/O signals (PWM/I2C/GPIO/5V/3.3V options) * 1x analog input (0 to 5V) * 1x CAN (loading option) * off-board LVDS: - I2C - 12V - LED driver (4x 330mA strings) - matrix keypad controller (8row x 10col) - I2S - dual-channel LVDS - PWM * off-board video input: - 16bit parallel / MIPI (IPU1_CSI0) * GPS (loading option) * Analog Video Input (CVBS) 3 inputs (1 active at a time) * Analog Audio Input/Output (2ch Line level, optional MIC/HP drivers) * HDMI out * JTAG programmable * Inertial Module Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-03 00:39:37 +07:00
imx6q-gw560x.dtb \
ARM: dts: imx: add Gateworks Ventana GW5903 support The Gateworks Ventana GW5903 is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * 4GiB DDR3 DRAM * 32GB eMMC * 1x microSD connector * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * Inertial Module * uBlox EMMY-W1 (bluetooth/nfc/802.11ac) Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-04 04:18:21 +07:00
imx6q-gw5903.dtb \
ARM: dts: imx: add Gateworks Ventana GW5904 support The Gateworks Ventana GW5904 is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * 2048MB DDR3 DRAM (4x64bit) (options up to 4GiB) * 8GB eMMC * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * 1x miniPCIe socket (with PCIe, USB) * 1x miniPCIe socket (USB) * 1x M.2 socket (USB, 2x SIM) * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) * GPS (optional uBlox EVA-M8M) * Application headers: - 2x RS232 UART (TX/RX/CTS/RTS) - 8x TTL GPIO (3x configurable as PWM) - 1x LVDS display 3D+C with i2c touch and PWM backlight * MV88E6176 GbE Switch (uplink to IMX FEC) * Front panel connectors: - 1x user programmable LED - 1x configurable user pushbutton - 1x USB OTG - 4x GbE LAN Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-16 21:27:19 +07:00
imx6q-gw5904.dtb \
ARM: dts: imx6: add support for Auvidea H100 board The Auvidea H100 is a baseboard for the SolidRun MicroSOM. Its primary feature is a Toshiba TC358743 HDMI to CSI decoder, allowing the board to work as HDMI passthrough and framegrabber. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-03 23:40:29 +07:00
imx6q-h100.dtb \
ARM: dts: hummingboard: Split HummingBoard DT to support s/dl and d/q Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-23 16:11:36 +07:00
imx6q-hummingboard.dtb \
ARM: dts: imx6qdl: SolidRun: add v1.5 som with eMMC Add Cubox-i and Hummingboard variants for v1.5 SOMs, where the SOM has eMMC fitted. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-11-28 22:03:11 +07:00
imx6q-hummingboard-emmc-som-v15.dtb \
ARM: dts: imx6qdl: SolidRun: add v1.5 som without eMMC Add Cubox-i and Hummingboard variants for v1.5 SOMs, which have TI Wi-Fi instead of Broadcom Wi-Fi. This variant does not include SOM eMMC support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-11-28 22:03:06 +07:00
imx6q-hummingboard-som-v15.dtb \
ARM: dts: imx6qdl: add HummingBoard2 boards This adds support for the Hummingboard Gate and Edge devices from SolidRun. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-11 23:57:22 +07:00
imx6q-hummingboard2.dtb \
ARM: dts: imx6qdl-hummingboard2: add v1.5 som with eMMC Add support for the v1.5 SOM with TI Wi-Fi and eMMC. As the pinmux settings are different for the microsom, we need to use a separate board-level dts for this as there is no support for overlays. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-11 23:58:54 +07:00
imx6q-hummingboard2-emmc-som-v15.dtb \
ARM: dts: imx6qdl-hummingboard2: add v1.5 som without eMMC Add support for the v1.5 SOM with TI Wi-Fi but without eMMC. As the pinmux settings are different for the microsom, we need to use a separate board-level dts for this as there is no support for overlays. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-11 23:58:49 +07:00
imx6q-hummingboard2-som-v15.dtb \
ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support i.CoreM6 Quad/Dual modules are system on module solutions manufactured by Engicam with following characteristics: CPU NXP i.MX6 DQ, 800MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB Power supply Single 5V MAX LCD RES FULLHD and more info at http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-21 15:05:51 +07:00
imx6q-icore.dtb \
ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for Android and video capture application. notable features: CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz Memory Up to 2 GB DDR3-1066 Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4 port 8 bit CSI INPUT MIPI-CSI INPUT 1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-26 15:05:54 +07:00
imx6q-icore-mipi.dtb \
ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1 initial support i.CoreM6 Quad/Dual OpenFrame modules are "system on modules plus openframe display carriers" which are good solution for develop user friendly graphic user interface. General features: CPU NXP i.MX6Q rev1.2 at 792 MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB LVDS Display TFT 10.1" industrial, 1280x800 resolution Backlight LED backlight, brightness 350 Cd/m2 Power supply 15 to 30 Vdc Cc: Domenico Acri <domenico.acri@engicam.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-14 16:48:11 +07:00
imx6q-icore-ofcap10.dtb \
ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 12.3 initial support i.CoreM6 Quad/Dual OpenFrame modules are "system on modules plus openframe display carriers" which are good solution for develop user friendly graphic user interface. General features: CPU NXP i.MX6Q rev1.2 at 792 MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB LVDS Display TFT 12.3" industrial, 1280x480 resolution Backlight LED backlight, brightness 350 Cd/m2 Power supply 15 to 30 Vdc Cc: Domenico Acri <domenico.acri@engicam.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-14 16:48:12 +07:00
imx6q-icore-ofcap12.dtb \
ARM: dts: imx6q-icore-rqs: Add Engicam IMX6 Q7 initial support www.engicam.com/en/products/embedded/som/standard/i-core-rqs-m6s-dl-d-q Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-01-29 15:01:39 +07:00
imx6q-icore-rqs.dtb \
ARM: dts: tpc: Device tree description of the iMX6Q TPC board This commit adds device tree description of Kieback & Peter GmbH iMX6Q TPC board. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-19 21:32:40 +07:00
imx6q-kp-tpc.dtb \
ARM: dts: imx6: Add dts for Embest MarS Board Embest MarS Board [1] is a multi-core platform based on Freescale i.MX6 Cortex-A9 Dual Core, running up to 1GHz with 1 GB of RAM, 4GB of eMMC and with a 4MB SPI flash. [1] http://www.embest-tech.com/shop/star/marsboard.html Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-27 06:38:22 +07:00
imx6q-marsboard.dtb \
ARM: dts: imx6q: Add mccmon6 board support This patch provides support for Liebherr's Monitor 6 board (abverrated as mccmon6) to Linux kernel. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 17:46:21 +07:00
imx6q-mccmon6.dtb \
ARM: dts: imx: add nitrogen6x board Add file imx6q-nitrogen6x.dts, imx6dl-nitrogen6x.dts, imx6qdl-nitrogen6x.dtsi And add board to makefile. Eric Nelson created a web page to show the differences between Nitrogen6x and Sabre Lite boards. http://boundarydevices.com/differences-sabre-lite-nitrogen6x Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-17 08:13:03 +07:00
imx6q-nitrogen6x.dtb \
ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Based on i.MX6 Quad with 4GB of DDR3. http://boundarydevices.com/product/nitrogen6max/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-09-30 20:46:45 +07:00
imx6q-nitrogen6_max.dtb \
ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support SoM based on i.MX6 Quad with 1GB of DDR3. https://boundarydevices.com/product/nit6x-som-v2/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-02 00:10:02 +07:00
imx6q-nitrogen6_som2.dtb \
ARM: dts: imx6q: add Novena board Novena is an open-hardware laptop/desktop/bare board. See http://www.kosagi.com/w/index.php?title=Novena_Main_Page Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-18 12:29:50 +07:00
imx6q-novena.dtb \
ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6Quad/Dual RDK Add support for the PHYTEC phyBOARD-Mira Rapid Development Kit with i.MX 6Quad/Dual with eMMC or NAND. Following interfaces are supported: - Gigabit Ethernet - USB Host - CAN - RS232 - PCIe - LVDS - HDMI Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-01-09 23:09:57 +07:00
imx6q-phytec-mira-rdk-emmc.dtb \
imx6q-phytec-mira-rdk-nand.dtb \
ARM: dts: Phytec imx6q pfla02 and pbab01 support Add support for imx6q Phytec phyFLEX-i.MX6 Quad (aka pfla02 and pbab01). - Module pfla02 - Carrier-Board pbab01 Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-12 00:48:22 +07:00
imx6q-phytec-pbab01.dtb \
ARM: dts: Add initial Pistachio i.mx6q board support. Working items: - 800MHz CPU - 2GB of RAM (DDR3) - 4GB of eMMC storage - 1T1R WiFi 2.4 GHz - Power management support - 1x 10/100/1000 Mbps Ethernet WAN port - 2x USB 2.0 Host - PCIe - HDMI/VGA/LVDS display - 1x UART for RS232/422/485 - 2x UART for RS232 - 1x UART for serial console - 1x CAN bus Specification: http://nutsboard.org/pistachio Signed-off-by: YuanCheng Cheng <onlywig@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-09-09 19:54:21 +07:00
imx6q-pistachio.dtb \
ARM: dts: add initial Rex Pro board support Add initial Rex Pro i.mx6q board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6q-rex-pro.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-08 21:49:22 +07:00
imx6q-rex-pro.dtb \
ARM: dts: imx6q-sabreauto: Add basic support mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-08 00:12:49 +07:00
imx6q-sabreauto.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx6q-sabrelite.dtb \
ARM: dts: MicroSys sbc6x support (i.MX6) Add support for MicroSys sbc6x board. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 19:24:22 +07:00
imx6q-sabresd.dtb \
ARM: dts: imx6: Support Savageboard quad Use common board file and support SATA interface additionally. Specify the dtb file for i.MX6 build. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-04 11:55:53 +07:00
imx6q-savageboard.dtb \
ARM: dts: imx6sl: add initial imx6sl-evk support Add initial imx6sl-evk board support with uart, usdhc and fec enabled. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-03 10:28:42 +07:00
imx6q-sbc6x.dtb \
ARM: dts: add initial support for TBS2910 Matrix ARM mini PC TBS2910 is a i.MX6Q based board. For additional details refer to http://www.tbsdtv.com/products/tbs2910-matrix-arm-mini-pc.html Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-10-28 02:10:51 +07:00
imx6q-tbs2910.dtb \
ARM: dts: TS-4900: add basic device tree These device trees add support for TS-4900 by Technologic Systems. More details here: http://wiki.embeddedarm.com/wiki/TS-4900 Signed-off-by: Lucile Quirion <lucile.quirion@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-09 22:15:44 +07:00
imx6q-ts4900.dtb \
ARM: dts: TS-7970: add basic device tree These device trees add support for TS-7970 by Technologic Systems. More details here: https://wiki.embeddedarm.com/wiki/TS-7970 Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-07 23:05:50 +07:00
imx6q-ts7970.dtb \
ARM: dts: imx6: add support for Ka-Ro TX6 modules This patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are five distinct module types with either i.MX6Q or i.MX6DL and LVDS or LCD display interface and one DTS file for a complete system with an i.MX6DL based TX6 module and a baseboard mounted on the back of a display (imx6dl-tx6dl-comtft.dts). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-12 20:05:17 +07:00
imx6q-tx6q-1010.dtb \
imx6q-tx6q-1010-comtft.dtb \
imx6q-tx6q-1020.dtb \
imx6q-tx6q-1020-comtft.dtb \
ARM: dts: imx6: add support for more Ka-Ro electronics modules Add support for the following i.MX6 based modules from Ka-Ro electronics GmbH: TX6S-8034: Processor Freescale i.MX 6 Solo, 800MHz RAM 256MiB DDR3 SDRAM ROM 128MiB NAND Flash Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6S-8035: Processor Freescale i.MX 6 Solo, 800MHz RAM 512MiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6U-8033: Processor Freescale i.MX 6 Dual Lite, 800MHz RAM 1GiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6Q-1036: Processor Freescale i.MX 6Quad, 1GHz RAM 1GB DDR3 SDRAM 64-bit ROM 8GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range Extended Consumer Grade (-20°C to 105°C Tj) Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-31 19:33:44 +07:00
imx6q-tx6q-1036.dtb \
ARM: dts: imx: add support for TX6 modules on MB7 baseboard Create .dts files for various Ka-Ro electronics TX modules on the MB7 baseboard. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-17 16:18:03 +07:00
imx6q-tx6q-1036-mb7.dtb \
imx6q-tx6q-10x0-mb7.dtb \
ARM: dts: imx6: add support for Ka-Ro TX6 modules This patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are five distinct module types with either i.MX6Q or i.MX6DL and LVDS or LCD display interface and one DTS file for a complete system with an i.MX6DL based TX6 module and a baseboard mounted on the back of a display (imx6dl-tx6dl-comtft.dts). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-12 20:05:17 +07:00
imx6q-tx6q-1110.dtb \
ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard This baseboard can be used with all TX6 SoMs, but only a certain set of combinations can be ordered by default. Add support for these combinations in mainline, so that users can easily adopt their own combination of SoM and baseboard themselves. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-31 19:33:45 +07:00
imx6q-tx6q-11x0-mb7.dtb \
ARM: dts: imx6q: sort dtbs in makefile Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-24 05:45:34 +07:00
imx6q-udoo.dtb \
ARM: dts: imx6q: add support for the Utilite Pro The CompuLab Utilite Pro is a miniature fanless desktop pc based on the i.MX6 Quad powered cm-fx6 module. It features two serial ports, USB OTG, 4x USB, analog audio and S/PDIF, 2x Gb Ethernet, HDMI and DVI ports, an on-board 32GB SSD, a mmc slot, and on-board wifi/bt. Add initial support for it including USB, Ethernet (both ports), sata and HDMI support. Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-08 00:14:17 +07:00
imx6q-utilite-pro.dtb \
ARM: dts: imx6q: Add Variscite DART-MX6 Carrier-board support This patch adds support for the i.MX6 Quad variant of the Variscite DART-MX6 SoM Carrier-Board. This Carrier-Board has the following : - LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch display - HDMI Connector - USB Host + USB OTG Connector - 10/100/1000 Mbps Ethernet - miniPCI-Express slot - SD Card connector - Audio Headphone/Line In jack connectors - On-board DMIC - CAN bus header - SPI header - Camera Interfaces header - 4xButtons, 2xLeds - OnBoard RTC with Coin Backup battery socket - RS232 Header + USB-Serial debug port Product Page : http://www.variscite.com/products/evaluation-kits/dart-mx6-kits The board support is done with all on-board and header interfaces enabled. 7" LVDS Touchscreen is enabled by default along HDMI output. Audio interface is supported with the "simple-card" bindings. PCIe slot, On-Board DMIC and Camera Interfaces are not handled yet. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-04 16:21:09 +07:00
imx6q-var-dt6customboard.dtb \
ARM: dts: imx6q: sort dtbs in makefile Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-24 05:45:34 +07:00
imx6q-wandboard.dtb \
ARM: dts: imx: Add basic dts support for imx6qp-sabreauto This patch adds basic dts file for i.MX6QP-Sbreauto board. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-02 17:01:36 +07:00
imx6q-wandboard-revb1.dtb \
ARM: dts: imx6qdl-wandboard: Add support for the revd1 variants Latest wandboard hardware revision is revd1, which brings the following new features: - PFUZE100 PMIC - AR8035 Ethernet PHY - Upgrade Wifi/BT chip to BCM4339/BCM43430. Add support for the mx6, mx6dl and mx6qp revd1 variants. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-14 19:43:22 +07:00
imx6q-wandboard-revd1.dtb \
ARM: dts: imx6: add ZII RDU2 boards This adds support for the Zodiac Inflight Innovations RDU2 board, which has both a Quad and a QuadPlus variant. The board supports different panels, with the bootloader patching in the correct compatible, depending on the hardware configuration. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-23 21:24:29 +07:00
imx6q-zii-rdu2.dtb \
ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Based on i.MX6 Quad Plus with 4GB of RAM. https://boundarydevices.com/product/nitrogen6max/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-02 23:25:47 +07:00
imx6qp-nitrogen6_max.dtb \
ARM: dts: imx6qp-nitrogen6_som2: add Quad Plus variant of the SOM https://boundarydevices.com/product/nit6x-som-v2/ Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-29 15:45:23 +07:00
imx6qp-nitrogen6_som2.dtb \
ARM: dts: imx6: Add support for phyBOARD-Mira with i.MX 6QuadPlus Add support for the PHYTEC phyBOARD-Mira with i.MX 6QuadPlus with NAND. It is based on the phyBOARD-Mira with i.MX 6Quad/Dual and supports the same interfaces. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de> Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-01-09 23:09:59 +07:00
imx6qp-phytec-mira-rdk-nand.dtb \
ARM: dts: imx: Add basic dts support for imx6qp-sabresd This patch adds dts file for imx6qp-sabresd board. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-02 17:01:37 +07:00
imx6qp-sabreauto.dtb \
ARM: dts: imx6: add ZII RDU2 boards This adds support for the Zodiac Inflight Innovations RDU2 board, which has both a Quad and a QuadPlus variant. The board supports different panels, with the bootloader patching in the correct compatible, depending on the hardware configuration. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-23 21:24:29 +07:00
imx6qp-sabresd.dtb \
ARM: dts: imx: add support for TX6QP The TX6QP-8037 is a Computer On Module manufactured by Ka-Ro electronics GmbH with the following characteristics: Processor Freescale i.MX 6QuadPlus MCIMX6QP7, 1 GHz RAM 1GiB 64-bit DDR3 SDRAM ROM 4GB HiRel eMMC Power supply Single 3.3 to 5V Size 26mm SO-DIMM Temp. Range -40°C to 105°C Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-17 16:18:02 +07:00
imx6qp-tx6qp-8037.dtb \
ARM: dts: imx: add support for TX6 modules on MB7 baseboard Create .dts files for various Ka-Ro electronics TX modules on the MB7 baseboard. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-17 16:18:03 +07:00
imx6qp-tx6qp-8037-mb7.dtb \
ARM: dts: imx: add support for TX6QP The TX6QP-8037 is a Computer On Module manufactured by Ka-Ro electronics GmbH with the following characteristics: Processor Freescale i.MX 6QuadPlus MCIMX6QP7, 1 GHz RAM 1GiB 64-bit DDR3 SDRAM ROM 4GB HiRel eMMC Power supply Single 3.3 to 5V Size 26mm SO-DIMM Temp. Range -40°C to 105°C Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-17 16:18:02 +07:00
imx6qp-tx6qp-8137.dtb \
ARM: dts: imx: add support for TX6 modules on MB7 baseboard Create .dts files for various Ka-Ro electronics TX modules on the MB7 baseboard. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-17 16:18:03 +07:00
imx6qp-tx6qp-8137-mb7.dtb \
ARM: dts: imx6qdl-wandboard: Add support for the revd1 variants Latest wandboard hardware revision is revd1, which brings the following new features: - PFUZE100 PMIC - AR8035 Ethernet PHY - Upgrade Wifi/BT chip to BCM4339/BCM43430. Add support for the mx6, mx6dl and mx6qp revd1 variants. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-14 19:43:22 +07:00
imx6qp-wandboard-revd1.dtb \
ARM: dts: imx6: add ZII RDU2 boards This adds support for the Zodiac Inflight Innovations RDU2 board, which has both a Quad and a QuadPlus variant. The board supports different panels, with the bootloader patching in the correct compatible, depending on the hardware configuration. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-23 21:24:29 +07:00
imx6qp-zii-rdu2.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_IMX6SL) += \
ARM: dts: warp: Add initial WaRP Board support The WaRP Board is a Wearable Reference Plaform. The board features: - Freescale i.MX6 SoloLite processor with 512MB of RAM - Freescale FXOS8700CQ 6-axis Xtrinsic sensor - Freescale Kinetis KL16 MCU - Freescale Xtrinsic MMA955xL intelligent motion sensing platform The board implements a hybrid architecture to address the evolving needs of the wearables market. The platform consists of a main board and an example daughtercard with the ability to add additional daughtercards for different usage models. For more information about the project, visit: http://www.warpboard.org/ Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-03 10:41:45 +07:00
imx6sl-evk.dtb \
imx6sl-warp.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_IMX6SX) += \
ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Based on i.MX6 SoloX with 1GB of RAM. https://boundarydevices.com/product/nit6_solox-imx6/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-12 04:01:36 +07:00
imx6sx-nitrogen6sx.dtb \
ARM: dts: imx6sx: add i.mx6sx sabreauto board support Add basic i.MX6SoloX Sabre Auto board support, currently only debug UART and uSDHC are supported on this board. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-12-17 11:22:09 +07:00
imx6sx-sabreauto.dtb \
ARM: imx6sx-sdb: add revb board and make it default Since imx6sx-sdb reva board is experimental and will not be used formally (eg, no software release based on it), we set revb board as the formal imx6sx-sdb board. The imx6sx-sdb uses pfuse200 as pmic which has only one power supply for both VDDARM_IN and VDDSOC_IN, so VDDARM_IN and VDDSOC_IN have to use the same (higher one in the same frequency) one as its power supply, that's the reason we override the OPP setting in board dts file. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-02-26 15:28:30 +07:00
imx6sx-sdb-reva.dtb \
ARM: dts: imx6sx-sdb: Add SAI support Introduce imx6sx-sdb-sai.dts so that it is possible to use the SAI interface. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-12 12:43:43 +07:00
imx6sx-sdb-sai.dtb \
ARM: dts: imx6sx: Add UDOO Neo support Add initial device trees for UDOO Neo Basic, Extended and Full boards: * Serial console is enabled, other serial ports are prepared. * I2C based PMIC is enabled. * Ethernet is enabled for Basic and Full. * SDHC is enabled, with the SDIO_PWR GPIO modeled as a regulator. * Both user LEDs are enabled, with the orange one reserved for the M4 and with the SD card as default trigger for the red LED. The decision on a board compatible string is deferred to later. Cc: Ettore Chimenti <ettore.chimenti@udoo.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-16 21:44:23 +07:00
imx6sx-sdb.dtb \
ARM: dts: imx6sx: add vining-2000 board support Add initial imx6sx-softing-vining-2000 board support. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-09-03 16:35:11 +07:00
imx6sx-softing-vining-2000.dtb \
ARM: dts: imx6sx: Add UDOO Neo support Add initial device trees for UDOO Neo Basic, Extended and Full boards: * Serial console is enabled, other serial ports are prepared. * I2C based PMIC is enabled. * Ethernet is enabled for Basic and Full. * SDHC is enabled, with the SDIO_PWR GPIO modeled as a regulator. * Both user LEDs are enabled, with the orange one reserved for the M4 and with the SD card as default trigger for the red LED. The decision on a board compatible string is deferred to later. Cc: Ettore Chimenti <ettore.chimenti@udoo.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-16 21:44:23 +07:00
imx6sx-udoo-neo-basic.dtb \
imx6sx-udoo-neo-extended.dtb \
imx6sx-udoo-neo-full.dtb
ARM: dts: imx: add imx6ul and imx6ul evk board support Add new SOC i.MX6UL dtb file support, including evk board support i.MX6 Ultralite processor include one ARM cortext-A7 core. Offer high perfomance and lowest power consumption. Main included: - 4 MMC/SD/SDIO - 2 USB 2.0 OTG - 3 I2S/SAI/AC97 - 4 eCSPI - 4 I2C - 2 ENET - 2 CAN - 3 wdog - ASRC - 8 uart - LCDIF - PXP Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Fancy Fang <chen.fang@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-10 01:09:45 +07:00
dtb-$(CONFIG_SOC_IMX6UL) += \
ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules The TXUL-0010/-0011 modules are Computers On Module manufactured by Ka-Ro electronics GmbH with the following characteristics: Processor Freescale i.MX 6UltraLite MCIMX6G2, 528 MHz RAM 256MB 16-bit DDR3 SDRAM ROM 128MB NAND Flash (TXUL-0010) / 4GB eMMC (TXUL-0011) Power supply Single 3.3 to 5V Size 26mm SO-DIMM Temp. Range -40°C to 85°C Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-04 19:37:22 +07:00
imx6ul-14x14-evk.dtb \
ARM: dts: imx6ul-geam: Skip suffix -kit from dts name Engicam SOM's with mounted on starter kits like icorem6(rqs), isiot usually not explicitly named with -kit in dts file names and instead Model has mentioned 'Starter kit' So apply the same rule for geam SOM as well. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-16 14:04:39 +07:00
imx6ul-geam.dtb \
ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL eMMC initial support Engicam Is.IoT MX6UL has separate module for eMMC, so add emmc dts file for imx6ul-isiot.dtsi, usdhc2 node represent eMMC. dmesg: ----- mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA mmc1: new DDR MMC card at address 0001 mmcblk1: mmc1:0001 M62704 3.53 GiB Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-23 16:38:34 +07:00
imx6ul-isiot-emmc.dtb \
ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL NAND initial support Engicam Is.IoT MX6UL has separate module for NAND, so add nand dts file for imx6ul-isiot.dtsi. dmesg: ----- nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAH4 nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 gpmi-nand 1806000.gpmi-nand: enable the asynchronous EDO mode 5 gpmi-nand 1806000.gpmi-nand: driver registered. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-23 16:43:10 +07:00
imx6ul-isiot-nand.dtb \
ARM: dts: imx6ul: Add DTS for liteBoard liteBoard is a development board which uses liteSOM as its base. Hardware specification: * liteSOM (i.MX6UL, DRAM, eMMC) * Ethernet PHY (id 0) * USB host (usb_otg1) * MicroSD slot (uSDHC1) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-21 22:07:17 +07:00
imx6ul-liteboard.dtb \
ARM: dts: add Armadeus Systems OPOS6UL and OPOS6ULDEV support OPOS6UL is an i.MX6UL based SoM. OPOS6ULDev is a carrier board for the OPOS6UL SoM. For more details see: http://www.opossom.com/english/products-processor_boards-opos6ul.html http://www.opossom.com/english/products-development_boards-opos6ul_dev.html Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2017-01-10 20:32:53 +07:00
imx6ul-opos6uldev.dtb \
ARM: dts: imx6ul-pico-hobbit: Add initial support Add initial support for imx6ul pico hobbit board. For information about this board, please visit: http://www.wandboard.org/images/hobbit/hobbitboard-imx6ul-reva1.pdf Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-27 11:00:21 +07:00
imx6ul-pico-hobbit.dtb \
ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules The TXUL-0010/-0011 modules are Computers On Module manufactured by Ka-Ro electronics GmbH with the following characteristics: Processor Freescale i.MX 6UltraLite MCIMX6G2, 528 MHz RAM 256MB 16-bit DDR3 SDRAM ROM 128MB NAND Flash (TXUL-0010) / 4GB eMMC (TXUL-0011) Power supply Single 3.3 to 5V Size 26mm SO-DIMM Temp. Range -40°C to 85°C Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-04 19:37:22 +07:00
imx6ul-tx6ul-0010.dtb \
ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL mainboard Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-04 19:37:23 +07:00
imx6ul-tx6ul-0011.dtb \
ARM: dts: imx6ull: add imx6ull support It is the 10th processor in the well-known imx6 series, and derived from imx6ul but cost optimized. The more information about imx6ull can be found at: http://www.nxp.com/products/microcontrollers-and-processors/ arm-processors/i.mx-applications-processors/i.mx-6-processors /i.mx6qp/i.mx-6ull-single-core-processor-with-arm-cortex-a7-core :i.MX6ULL imx6ul.dtsi is the SoC common stuff for both imx6ul and imx6ull; imx6ul-14x14-evk.dts is the board common stuff for both imx6ul and imx6ull 14x14 evk. In this patch, for SoC part, the imx6ull.dtsi includes imx6ul.dtsi; for board part, imx6ull-14x14-evk.dts includes imx6ul-14x14-evk.dts. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-14 14:04:20 +07:00
imx6ul-tx6ul-mainboard.dtb \
ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support Add support for the Computer on Module Colibri iMX6ULL and its Bluetooth/Wifi variant along with the development/evaluation carrier board device trees. Follow the usual hierarchic include model, maintaining shared configuration in imx6ull-colibri.dtsi and imx6ull-colibri-eval-v3.dtsi respectively. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-06 23:49:03 +07:00
imx6ull-14x14-evk.dtb \
imx6ull-colibri-eval-v3.dtb \
imx6ull-colibri-wifi-eval-v3.dtb
ARM: dts: add imx7d-sdb support add imx7d sdb board support Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-19 01:45:05 +07:00
dtb-$(CONFIG_SOC_IMX7D) += \
ARM: dts: imx7d: cl-som-imx7: add basic module support CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on Freescale i.MX7 System-on-Chip family. http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/ Add basic DT support for standalone module (without a carrier board): * Memory configuration * eMMC * 2x Gigabit Ethernet ports (FEC1 and FEC2) * I2C2 bus * EEPROM * PCA9555 GPIO extender * PMIC * UART1 * USB OTG port Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2015-12-22 15:15:19 +07:00
imx7d-cl-som-imx7.dtb \
ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support Add support for the Computer on Module Colibri iMX7D 1GB along with the Colibri Evaluation Board device trees. Follow the usual hierarchic include model, maintaining shared configuration in imx7-colibri.dtsi and imx7-colibri-eval-v3.dtsi respectively. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-20 01:10:38 +07:00
imx7d-colibri-emmc-eval-v3.dtb \
ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D support Add support for the Computer on Module Colibri iMX7S/iMX7D along with the development/evaluation carrier board device trees. Follow the usual hierarchic include model, maintaining shared configuration in imx7-colibri.dtsi and imx7-colibri-eval-v3.dtsi respectively. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-26 15:47:55 +07:00
imx7d-colibri-eval-v3.dtb \
ARM: dts: imx: add Boundary Devices Nitrogen7 board Based on i.MX7 Dual with 1GB of RAM. https://boundarydevices.com/product/nitrogen7/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-07 20:50:57 +07:00
imx7d-nitrogen7.dtb \
ARM: dts: imx7d-pico-pi: Separate into cpu and baseboard dts Separate the old imx7d-pico into cpu (imx7d-pico.dtsi) and baseboard (imx7d-pico-pi.dts) dts so the same cpu dtsi can be used in different baseboards variants. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-01 00:55:17 +07:00
imx7d-pico-pi.dtb \
ARM: dts: imx7d: sbc-imx7: add basic board support SBC-iMX7 is a single board computer designed for industrial and embedded applications. It is based on the Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with the CL-SOM-iMX7 System-on-Module providing most of the functions, and SB-SOM-iMX7 carrier board providing additional peripheral functions and connectors. http://www.compulab.co.il/products/sbcs/sbc-imx7-freescale-i-mx-7-single-board-computer/ http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/ Add basic board support, including SD card as a secondary boot and storage device Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2015-12-22 15:15:20 +07:00
imx7d-sbc-imx7.dtb \
ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D support Add support for the Computer on Module Colibri iMX7S/iMX7D along with the development/evaluation carrier board device trees. Follow the usual hierarchic include model, maintaining shared configuration in imx7-colibri.dtsi and imx7-colibri-eval-v3.dtsi respectively. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-26 15:47:55 +07:00
imx7d-sdb.dtb \
ARM: dts: imx7d-sdb: Add sht11 Click Board support The imx7d-sdb has a mickro bus connector that can be connected to a Sensirion SHT11 click board (temperature and humidity sensor): https://shop.mikroe.com/click/sensors/sht1x Add a new device tree file to describe such hardware. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-09 01:32:29 +07:00
imx7d-sdb-sht11.dtb \
ARM: dts: imx7s-warp: Add initial support Add the initial support for the Warp7 board. For more information about this reference design, please visit: https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-07-12 21:19:06 +07:00
imx7s-colibri-eval-v3.dtb \
imx7s-warp.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_LS1021A) += \
ARM: dts: ls1021a: add support for Moxa UC-8410A open platform Add support for Moxa UC-8410A open platform The UC-8410A computing platform is designed for embedded communication-centric industrial applications The features of UC-8410A are: * QSPI flash * SD slot * 3x LAN * 8x RS-232/422/485 ports, software-selectable * Mini PCIe form factor with PCIe/USB signal * 2x USB host * TPM * Watchdog * RTC * User LEDs * Beeper * Push button Signed-off-by: Jimmy Chen <jimmy.chen@moxa.com> Signed-off-by: Harry YJ Jhou <harryyj.jhou@moxa.com> Signed-off-by: SZ Lin <sz.lin@moxa.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26 11:54:31 +07:00
ls1021a-moxa-uc-8410a.dtb \
ARM: dts: Add initial LS1021A QDS board dts support The LS1021A QorIQ development system (QDS) is a high-performance computing evaluation, development and test platform supporting the LS1021A processor. The LS1021A QDS is optimized to support the high-bandwidth DDR3LP/DDR4 memory and a full complement of high-speed SerDes ports. For more detail information about the LS1021AQDS, please refer to the QorIQ LS1021A Development System Reference Manual. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Chao Fu <B44548@freescale.com> Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Jaiprakash Singh <b44839@freescale.com> Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-10-31 16:01:09 +07:00
ls1021a-qds.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
ls1021a-twr.dtb
dtb-$(CONFIG_SOC_VF610) += \
ARM: dts: vf500-colibri: add Colibri VF50 support Add Colibri VF50 device tree files vf500-colibri.dtsi and vf500-colibri-eval-v3.dts, in line with the Colibri VF61 device tree files. However, to minimize dupplication we also add vf-colibri.dtsi and vf-colibri-eval-v3.dtsi which contain the common device tree nodes. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-03 03:36:47 +07:00
vf500-colibri-eval-v3.dtb \
ARM: dts: vf610-colibri: split device tree for carrier boards The Colibri VF61 is a module which needs a carrier board to actually run. Different carrier board have different hardware support, hence we should reflect this in the device tree files. This patch adds the Colibri Evaluation Board, which supports almost all peripherals defined in the Colibri standard. Also align the compatible naming, file splitting and file naming with the scheme which was choosen for the Tegra based modules. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 21:25:18 +07:00
vf610-colibri-eval-v3.dtb \
ARM: dts: add support for Vybrid running on Cortex-M4 This adds an initial device tree to run Linux on the Cortex-M4 on the Vybrid based Colibri VF61 module. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-20 05:05:18 +07:00
vf610m4-colibri.dtb \
ARM: dts: add initial VF610 Cosmic/Cosmic+ board support Add initial PHYTEC VF610 Cosmic/Cosmic+ board support with UART and FEC enabled. Signed-off-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-23 22:14:44 +07:00
vf610-cosmic.dtb \
ARM: dts: vf6xx: Cosmic+: M4(nommu) initial support Minimal Cortex-M4 device tree to boot Linux to shell. M4 is booted via Cortex-A5 running Linux using Stefan Agner's <stefan@agner.ch> "m4boot" utility. Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-10-26 00:50:56 +07:00
vf610m4-cosmic.dtb \
ARM: dts: vf610-zii-dev: Add ZII development board. This commit adds support for Rev. B of a Zodiac Inflight Innovations development board, mainly intended for DSA and ARINC 429 development work. Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-05 04:53:12 +07:00
vf610-twr.dtb \
ARM: dts: vf610-zii-dev: Add .dts file for rev. C Add .dts file for rev. C of the board by factoring out commonalities into a shared include file (vf610-zii-dev-rev-b-c.dtsi) and deriving revision specific file from it (vf610-zii-dev-rev-b.dts and vf610-zii-dev-reb-c.dts). Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: andrew@lunn.ch Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Cc: cphealy@gmail.com Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-10 14:35:55 +07:00
vf610-zii-dev-rev-b.dtb \
vf610-zii-dev-rev-c.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_MXS) += \
imx23-evk.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx23-olinuxino.dtb \
ARM: dts: mxs: Add SanDisk Sansa Fuze+ support Add support for this small MP3 player based on STMP3780 (rev.3). Currently supported are both external microSD and internal SD-NAND bridge, PWM and USB gadget. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-10 02:43:13 +07:00
imx23-sansa.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx23-stmp378x_devb.dtb \
ARM: dts: mxs: Add Creative X-Fi3 support Add support for this small MP3 player based on STMP3780 (rev.4). Currently supported is both external microSD and internal SD-NAND bridge, PWM and USB gadget. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-10 02:43:12 +07:00
imx23-xfi3.dtb \
ARM: mxs: Add support for the Armadeus Systems APF28 module The APF28 is a small SOM built around an i.MX28 processor with 128MBytes DDR2, 256MBytes NAND Flash and an Ethernet PHY. Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-18 16:50:26 +07:00
imx28-apf28.dtb \
ARM: mxs: Add support for the Armadeus Systems APF28Dev docking board The APF28Dev is a docking board for an APF28 SOM Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-01 00:39:26 +07:00
imx28-apf28dev.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree support The CFA-10037 is another expansion board for the CFA-10036 module, with only a USB Host, a Ethernet device and a lot of gpios. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-26 12:40:37 +07:00
imx28-cfa10037.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 12:53:18 +07:00
imx28-cfa10049.dtb \
ARM: mxs: dt: Add the Crystalfontz CFA-10055 device tree The CFA-10055 is yet another breakout board for the CFA-10036, and is basically a CFA-10037, with the screen and LCD controller found on the CFA-10049. Signed-off-by: Brian Lilly <brian@crystalfontz.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-13 20:43:44 +07:00
imx28-cfa10055.dtb \
ARM: mxs: dt: Add Crystalfontz CFA-10056 device tree The CFA-10056 is a breakout board for the CFA-10036, and is basically a CFA-10037, with a 4.3" screen. Signed-off-by: Brian Lilly <brian@crystalfontz.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-01 20:23:23 +07:00
imx28-cfa10056.dtb \
ARM: mxs: dt: Add Crystalfontz CFA-10057 device tree The CFA-10057 is a breakout board for the CFA-10036 that has Ethernet, USB and a 4.3" LCD screen on it. Signed-off-by: Brian Lilly <brian@crystalfontz.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-13 20:43:45 +07:00
imx28-cfa10057.dtb \
ARM: mxs: dt: Add Crystalfontz CFA-10058 device tree The CFA-10058 is a breakout board for the CFA-10036 that has Ethernet, USB and a 5" LCD screen on it. Signed-off-by: Brian Lilly <brian@crystalfontz.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-01 20:23:24 +07:00
imx28-cfa10058.dtb \
ARM: dts: add support for I2SE Duckbill 2 485 This machine is based on I2SE's Duckbill 2 board and features a RS-485 daugther board. This device is intended to be used for e.g. home automation purposes. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-02-09 14:42:47 +07:00
imx28-duckbill-2-485.dtb \
ARM: dts: add support for I2SE Duckbill 2 boards This machine is an USB pen drive sized development board, based on NXP's i.MX28 CPU. In contrast to the previous model "Duckbill", the "Duckbill 2" series has internal eMMC storage. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-02-09 14:42:46 +07:00
imx28-duckbill-2.dtb \
ARM: dts: add support for I2SE Duckbill 2 EnOcean This machine is based on I2SE's Duckbill 2 board and features a EnOcean daugther board based on the popular TCM310 chipset. This product is intended to be used for e.g. home automation purposes. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-02-09 14:42:48 +07:00
imx28-duckbill-2-enocean.dtb \
ARM: dts: add support for I2SE Duckbill 2 SPI This machine is based on I2SE's Duckbill 2 board and is sold as part of I2SE's PLC Bundle for IoT. This is a development kit for Homeplug Green PHY based powerline products based on Qualcomms QCA7000 chip. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-02-09 14:42:49 +07:00
imx28-duckbill-2-spi.dtb \
ARM: mxs: add support for I2SE's duckbill series Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-09 18:14:16 +07:00
imx28-duckbill.dtb \
ARM: mxs: Add support for the eukrea-cpuimx28. The following devices/functionalities were tested: * Main UART. * Ethernet0. * Ethernet1. * SD. * USB host. * USB otg. * Display(and its backlight). * Touchscreen. * Audio. * nand. * i2c and the pcf8563 device. * The gpio buttons. * The gpio leds. * Watchdog Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-05 20:28:06 +07:00
imx28-eukrea-mbmx283lc.dtb \
imx28-eukrea-mbmx287lc.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx28-evk.dtb \
ARM: dts: mxs: Add MSR M28CU3 board This board is based on the M28 SoM with custom baseboard. Supported are LEDs, ethernet, PWM, LCD, SD slots. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-30 05:41:29 +07:00
imx28-m28cu3.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx28-m28evk.dtb \
ARM: mxs: Add SchulerControl SPS1 DTS file Add DTS file for this custom board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-19 04:08:29 +07:00
imx28-sps1.dtb \
ARM: dts: TS-4600: add basic device tree These device trees add support for the TS-4600 by Technologic Systems. More details here: http://wiki.embeddedarm.com/wiki/TS-4600 Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-08 00:11:18 +07:00
imx28-ts4600.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx28-tx28.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_NOMADIK) += \
ste-nomadik-s8815.dtb \
ARM: nomadik: device tree for NHK15 board This adds a device tree for the Nomadik NHK15 development kit board. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-10 03:10:35 +07:00
ste-nomadik-nhk15.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_NSPIRE) += \
nspire-cx.dtb \
arm: Add device trees for TI-Nspire hardware This patch adds device trees for describing the TI-Nspire hardware. Changes between v1 and v2: * Change "keymap" binding to the standard "linux,keymap" binding. Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-11 15:40:18 +07:00
nspire-tp.dtb \
nspire-clp.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_OMAP2) += \
omap2420-h4.dtb \
ARM: dts: Add basic Nokia N8X0 support Add minimal device tree support for n8x0 boards so we can make omap2 device tree only. Note that we still need to initialize various platform data quirks to keep things working until n8x0 drivers support device tree. Here's a rough todo list for the people using n8x0: 1. Update menelaus for device tree and set up regulators at least for the MMC driver 2. Remove the MMC regulator platform data callback by using the Menlaus regulators directly in the driver passed from the .dts file 3. Update GPMC connected devices for onenand and tusb6010 for device tree We're planning to remove all legacy platform data for mach-omap2 over next few merge cycles, so if people are still using n8x0, please fix the issues above. Cc: devicetree@vger.kernel.org Cc: "Benoît Cousson" <bcousson@baylibre.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 06:15:24 +07:00
omap2420-n800.dtb \
omap2420-n810.dtb \
omap2420-n810-wimax.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap2430-sdp.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_OMAP3) += \
am3517-craneboard.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit The LogicPD Torpedo DM3730 devkit consists of a base board and two processor boards. One of the processor boards has a WLAN and the other one does not. Let's set up basic dts file so we can move to device tree only based booting over next few merge windows. So far I've tested that UARTs, MMC1, USB OTG, smsc911x, and basic PM support works. Note that the wireless support in kernel for wl1283 seems to be broken, it tries to load wl127x-nvs.bin instead of wl128x-nvs.bin with firmware. Cc: Tim Nordell <tim.nordell@logicpd.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-20 23:23:43 +07:00
logicpd-torpedo-37xx-devkit.dtb \
ARM: dts: omap3: Add DTS for Logic PD SOM-LV 37xx Dev Kit Fixes: ("ab8dd3aed011 ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") This adds the dts file into the Makefile. This should have been included in the original patch. V2: Update patch description - same source code V1: Original patch Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-03 17:57:23 +07:00
logicpd-som-lv-37xx-devkit.dtb \
ARM: dts: OMAP3: Add support for OMAP3430 SDP board Adds basic device-tree support for OMAP3430 SDP board which has 256MB of RAM, 128MB ONENAND flash, 256MB NAND flash and uses the TWL4030 power management IC. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-01-11 23:39:22 +07:00
omap3430-sdp.dtb \
ARM: dts: Add omap3-beagle.dts Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This version of the Beagle board has 256MB of DDR and features the same TWL4030 power management IC (PMIC) as the Beagle board XM. Given that the Beagle and Beagle-XM boards use the same PMIC, move the definition of the VSIM regulator into the TWL4030.dtsi file so that we do not need to duplicate in the Beagle board dts file. This has been boot tested on an OMAP3530 Beagle board and verifing that the SD/MMC interface is working with a SD card. V2 changes - Rebased upon of devel-dt - Corrected copyright date in omap3-beagle.dts file - Added LED support after verifing that Beagle and Beagle XM have the same LED configuration Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-11 23:01:59 +07:00
omap3-beagle.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-beagle-xm.dtb \
omap3-beagle-xm-ab.dtb \
ARM: dts: sbc-t3517: add support for sbc-t3517 Add support for CM-T3517 CoM and SBC-T3517 board. reused common support for sbc-t3x boards (omap3-cm-t3x.dtsi, omap3-sb-t35.dtsi): * SB-T35 baseboard eth * MMC1, UART3 * HS USB Port 1/2 * I2C1/3 * Heartbit led Added basic support for: * MMC1 wp/cd signals * CM-T3517 Usb Hub * WL12xx WiFi chip * Davinci EMAC * AM35X OTG Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-01-12 20:22:54 +07:00
omap3-cm-t3517.dtb \
ARM: dts: sbc-t3530: add support for sbc-t3530 Add support for CM-T3530 CoM and SBC-T3530 board. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-01-12 20:22:53 +07:00
omap3-cm-t3530.dtb \
ARM: dts: Add support for sbc-3xxx with cm-t3730 This adds support for CompuLab SBC-T3530, also known as cm-t3730: http://compulab.co.il/products/sbcs/sbc-t3530/ It seems that with the sbc-3xxx mainboard is also used on SBC-T3517 and SBC-T3730 with just a different CPU module: http://compulab.co.il/products/sbcs/sbc-t3517/ http://compulab.co.il/products/sbcs/sbc-t3730/ So let's add a common omap3-sb-t35.dtsi and then separate SoC specific omap3-sbc-t3730.dts, omap3-sbc-t3530.dts and omap3-sbc-t3517.dts. I've tested this with SBC-T3730 as that's the only one I have. At least serial, both Ethernet controllers, MMC, and wl12xx WLAN work. Note that WLAN seems to be different for SBC-T3530. And SBC-T3517 may need some changes for the EMAC Ethernet if that's used instead of the smsc911x. Cc: devicetree@vger.kernel.org Cc: Mike Rapoport <mike@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-19 04:13:21 +07:00
omap3-cm-t3730.dtb \
ARM: dts: Add minimal DT support for DevKit8000 DevKit8000 is a beagle board clone from Timll, sold by armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D, S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and JTAG interface. Add the basic DT support for devkit8000. It includes: - twl4030 (PMIC) - MMC1 - I2C1 - leds Signed-off-by: Anil Kumar <anilk4.v@gmail.com> Tested-by: Thomas Weber <thomas@tomweber.eu> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-16 16:59:21 +07:00
omap3-devkit8000.dtb \
ARM: dts: omap3-devkit8000: add LCD panels Devkit8000 was sold with a 4.3" LCD or 7.0" or without. This patch creates one dts file per bundle. Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-06 04:47:08 +07:00
omap3-devkit8000-lcd43.dtb \
omap3-devkit8000-lcd70.dtb \
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 11:11:45 +07:00
omap3-evm.dtb \
ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM) I've tested the serial, MMC, smsc911x, wl12xx, and off-idle support with the pinctrl patches, so it probably works better than the board-*.c files ever did. Also the board-omap3evm.c file is broken for the DSS, and has been for a while. Patches are welcome to fix it in this .dts file, let's just drop the board-*.c file for this. Note that off-idle currently requires doing request_irq() on the wake-up pin from pinctrl-single IRQ domain until we can handle that in some Linux generic way. [tony@atomide.com: updated for make dtbs build fix] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-15 01:31:43 +07:00
omap3-evm-37xx.dtb \
ARM: dts: Add gta04a3 model Add gta04a3 model with additional acceleromer. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-29 02:53:32 +07:00
omap3-gta04a3.dtb \
ARM: dts: omap3-gta04: Rename gta04.dts to gta04.dtsi and add a4 model This patch is preparation of adding more boards which have common moved to omap3-gta04.dtsi. Other boards have only small additions to omap3-gta04a4. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-29 02:53:31 +07:00
omap3-gta04a4.dtb \
ARM: dts: Add gta04a5 model Add model a5 which have additional jack detection. Signed-off-by: Marek Belisko <marek@goldelico.com> [tony@atomide.com: fixed a typo for make dtbs to work] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-29 02:53:33 +07:00
omap3-gta04a5.dtb \
ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based) These baseboards are equipped with the Technexion TAO35030 SOM. So they include this dtsi. The common parts are extracted into an "common" dtsi file. The main difference between both boards is, that the *lcd has DSS support enabled for the LCD. Some HEAD acoustics specific features are: - LED handling - Special FPGA/DSP audio driver (not included in this series) - powerdown GPIO Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-08-29 17:40:06 +07:00
omap3-ha.dtb \
omap3-ha-lcd.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-igep0020.dtb \
ARM: dts: omap3-igep0020-rev-f: Support IGEPv2 Rev. F Add support for the new hardware revision of the IGEPv2. Basically, the new revision F replaces the old Wifi module for a Wilink8 based module. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-06 19:01:49 +07:00
omap3-igep0020-rev-f.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-igep0030.dtb \
ARM: dts: omap3-igep0030-rev-g: Support IGEP COM MODULE Rev. G Add support for the new hardware revision of the IGEP COM MODULE. Basically, the new revision G replaces the old Wifi module for a Wilink8 based module. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-06 19:01:47 +07:00
omap3-igep0030-rev-g.dtb \
ARM: dts: Add basic support for omap3 LDP zoom1 labrador Basic things like serial, Ethernet, MMC, NAND, DSS, touchscreen and GPIO keys work. For twl4030-keypad we're still missing the binding, but support for that should be trivial to add once the driver has been updated. MUSB I'm pretty sure I got got to enumerate once, but I suspect the battery charging somehow disrupts it and it's not enumerating in general for some reason. Patches are welcome to improve things if people are still using this board. For reference, here's some more info on this old board: http://www.openomap.org/wiki/tiki-index.php?page=HardwareInfo Cc: devicetree@vger.kernel.org Cc: "Benoît Cousson" <bcousson@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 06:15:39 +07:00
omap3-ldp.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-lilly-dbb056.dtb \
ARM: dts: N900: Add device tree This adds device tree with necessary support to boot with functional video (on both emulator and real N900 device). Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-08-13 20:36:36 +07:00
omap3-n900.dtb \
ARM: dts: add minimal DT support for Nokia N950 & N9 phones Add minimal DT support for Nokia N950 & N9 phones. The same functionality that is provided by the current board file should work: serial console, USB, OneNAND and MMC. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-16 03:36:09 +07:00
omap3-n9.dtb \
omap3-n950.dtb \
ARM: dts: Add support for the Overo Alto35 Alto35 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-11 19:20:33 +07:00
omap3-overo-alto35.dtb \
ARM: dts: Add support for the Overo Chestnut43 Chestnut43 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-11 19:20:34 +07:00
omap3-overo-chestnut43.dtb \
ARM: dts: Add support for the Overo Gallop43 Gallop43 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-11 19:20:32 +07:00
omap3-overo-gallop43.dtb \
ARM: dts: overo: Add device tree for Palo35 board Also, reduce the maximum SPI device speed to the max. supported by the LCD controller used on the LGPhilips LB035Q02 panel for this board. Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-13 03:37:26 +07:00
omap3-overo-palo35.dtb \
ARM: dts: Add support for the Overo Palo43 Palo43 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-11 19:20:31 +07:00
omap3-overo-palo43.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-overo-storm-alto35.dtb \
omap3-overo-storm-chestnut43.dtb \
omap3-overo-storm-gallop43.dtb \
ARM: dts: overo: Add device tree for Palo35 board Also, reduce the maximum SPI device speed to the max. supported by the LCD controller used on the LGPhilips LB035Q02 panel for this board. Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-13 03:37:26 +07:00
omap3-overo-storm-palo35.dtb \
ARM: dts: Add support for the Overo Palo43 Palo43 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-11 19:20:31 +07:00
omap3-overo-storm-palo43.dtb \
ARM: dts: Add support for the Overo Summit Summit is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-11 19:20:35 +07:00
omap3-overo-storm-summit.dtb \
ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi Unfortunatly the device tree for older OMAP35xx Overo cannot be used with newer OMAP36xx and vice-versa. To address this issue, move most of the Tobi DTS to a common include file, and create model-specific Tobi DTS. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-13 17:25:15 +07:00
omap3-overo-storm-tobi.dtb \
ARM: dts: Add DTS for Gumstix TobiDuo expansion board The Gumstix "Tobi-Duo" expansion board [1] can be used with either OMAP3 Overo or Overo Storm COMs. It provides two NICs using LAN9221 chips. It is necessary to duplicate the interface information for the second SMSC9221 chip as discussed [2]. [1] https://store.gumstix.com/index.php/products/241/ [2] http://www.spinics.net/lists/linux-omap/msg115282.html Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-13 03:37:23 +07:00
omap3-overo-storm-tobiduo.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-overo-summit.dtb \
omap3-overo-tobi.dtb \
ARM: dts: Add DTS for Gumstix TobiDuo expansion board The Gumstix "Tobi-Duo" expansion board [1] can be used with either OMAP3 Overo or Overo Storm COMs. It provides two NICs using LAN9221 chips. It is necessary to duplicate the interface information for the second SMSC9221 chip as discussed [2]. [1] https://store.gumstix.com/index.php/products/241/ [2] http://www.spinics.net/lists/linux-omap/msg115282.html Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-13 03:37:23 +07:00
omap3-overo-tobiduo.dtb \
ARM: dts: omap3-pandora: add OMAP3530 600 MHz version Added Pandora Rebirth model which is based on Pandora Classic with 512 MiB DDR-333 SDRAM memory. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Reviewed-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-28 04:26:38 +07:00
omap3-pandora-600mhz.dtb \
ARM: dts: omap3-pandora: add DM3730 1 GHz version Added Pandora 1 GHz model which is based on Classic/Rebirth with following changes: - upgraded cpu to dm3730 runs on 1GHz - 512 MiB DDR-333 SDRAM @ 200 MHz Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Reviewed-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-28 04:26:39 +07:00
omap3-pandora-1ghz.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-sbc-t3517.dtb \
omap3-sbc-t3530.dtb \
omap3-sbc-t3730.dtb \
ARM: dts: LG Optimus Black codename sniper basic support The LG Optimus Black codename sniper is a smartphone that was designed and manufactured by LG Electronics (LGE) and released back in 2011. It is using an OMAP3630 SoC, GP version. This adds devicetree support for the device, with only a few basic features supported, such as debug uart, i2c, internal emmc and external mmc. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-28 19:39:41 +07:00
omap3-sniper.dtb \
ARM: dts: omap3: Add Technexion Thunder support (TAO3530 SOM based) This baseboard is equipped with the Technexion TAO35030 SOM. So includes this dtsi. Some Thunder specific features are: - LCD panel Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-08-29 17:40:05 +07:00
omap3-thunder.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-zoom3.dtb
More changes for omap dts files mostly to add support for dm816x devices and clocks. Also adds a qspi device for dra72x-evm. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUvpqoAAoJEBvUPslcq6Vz2uwQALoPyfwWCDUlxZbZy/yNPq0b +l90dAo65hzrsPo9kWswj/lDfFDwTrLjxL9KcRu0gaoQp+UUgDOTuTIVe2ftqU4T 6C6MqriKlHL6vRYmm5BOrQq+Oc+xjdNSxfnCPOouOQRESJG8Jf7+5DykUkVcgh7n PeLaRLLb8AtEg0eBzRl7DtqvCJDU9zq8WkbtEeNso/j7P2uZ3DL/jieS0nyx9n14 fcHlHmNlBCAUH80DfbpU9QkfAg2G3DAahtdFFBrct/CltdbkprS3efzBGawQpRrh XBqWsFCnNz4nzAshFHgKsTmtX94mgzLj89VwvsVtVTnErlC7umbrUiPrj358F72Y lZib7jl3BLiVsDWSqIw5iulkpS+ukW1iBCzlp5C87DSXE97XJr7UscbA9EQMesFl bHcfq9cbpvMK6hujdx2QuZcSeahjvHSguIrxGtgtcf6Xj4Rx/iDGaTpalA5fxl65 VJn1FHmC74MYcpwnZSXk8KqVyX6IjlfRnc3C9Nt5GRXLx98h09l62LyIaMq2xAKv EvNoKf9T7MKo1ayhCDkja4ObcRU8HhR4v5Z32NkumbqT2jP8TjhzRGuLynMiNV1w M3Rv11D2wCo1e30vJjCpBI/cJOa6pdHFiWQrmmDI09wAywhZbmikxUJ0OIf5/H5r D+eWlZQSGWvtsRlVRkwI =vWKv -----END PGP SIGNATURE----- Merge tag 'omap-for-v3.20/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap device tree changes for v3.20, part 2" from Tony Lindgren: More changes for omap dts files mostly to add support for dm816x devices and clocks. Also adds a qspi device for dra72x-evm. * tag 'omap-for-v3.20/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra72-evm: Add qspi device ARM: dts: Add minimal support for dm8168-evm ARM: dts: Add basic clocks for dm816x ARM: dts: Add basic dm816x device tree configuration Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-24 04:48:57 +07:00
dtb-$(CONFIG_SOC_TI81XX) += \
ARM: dts: Add minimal dts support for dm8148-evm Add minimal dts support for dm8148-evm. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-24 12:33:18 +07:00
dm8148-evm.dtb \
ARM: dts: Add minimal support for HP T410 Add minimal support for HP T410. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-24 12:33:19 +07:00
dm8148-t410.dtb \
ARM: dts: Add minimal dra62x j5-eco evm support This allows us to boot dra62x j5-eco evm with NFSroot. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-23 07:00:28 +07:00
dm8168-evm.dtb \
dra62x-j5eco-evm.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_AM33XX) += \
ARM: dts: add DTS for Baltos IR2110 Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26 20:00:26 +07:00
am335x-baltos-ir2110.dtb \
ARM: dts: add DTS for Baltos IR3220 Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26 20:00:25 +07:00
am335x-baltos-ir3220.dtb \
ARM: dts: add DTS for Baltos IR5221 This device is an industrial PC based on AM335x SoC. [ balbi@ti.com : updated to fit current mainline ] Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-19 15:29:48 +07:00
am335x-baltos-ir5221.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
am335x-base0033.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
am335x-bone.dtb \
am335x-boneblack.dtb \
ARM: dts: Add am335x-boneblack-wireless BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with the Ethernet replaced by a TI wl1835 wireless module. This board can be indentified by the BWAx value after A335BNLT (BBB) in the at24 eeprom: BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|] http://beagleboard.org/black-wireless https://github.com/beagleboard/beaglebone-black-wireless firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware wl18xx mac address: /proc/device-tree/ocp/ethernet@4a100000/slave@4a100200/mac-address Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tony Lindgren <tony@atomide.com> Acked-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-28 00:58:35 +07:00
am335x-boneblack-wireless.dtb \
ARM: dts: Add am335x-boneblue BeagleBone Blue is robotics-oriented version of the BeagleBone Black (BBB). This board can be indentified by the BLAx value after A335BNLT (BBB) in the at24 eeprom: BLAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 4c 41 30 |.U3.A335BNLTBLA2|] http://beagleboard.org/blue https://github.com/beagleboard/beaglebone-blue firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware wl18xx mac address: /proc/device-tree/ocp/ethernet@4a100000/slave@4a100200/mac-address Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Drew Fustini <drew@beagleboard.org> Acked-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-05-30 23:20:23 +07:00
am335x-boneblue.dtb \
ARM: dts: Add am335x-bonegreen SeeedStudio BeagleBone Green (BBG) is clone of the BeagleBone Black (BBB) minus the HDMI port and addition of two Grove connectors (i2c2 and usart2). This board can be identified by the 1A value after A335BNLT (BBB) in the at24 eeprom: 1A: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 1a 00 00 00 |.U3.A335BNLT....|] http://beagleboard.org/green http://www.seeedstudio.com/wiki/Beaglebone_green Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tony Lindgren <tony@atomide.com> CC: Jason Kridner <jkridner@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-25 22:10:31 +07:00
am335x-bonegreen.dtb \
ARM: dts: Add am335x-bonegreen-wireless SeeedStudio BeagleBone Green Wireless (BBGW) is an expansion of the SeeedStudio Green (BBG) with the Ethernet replaced by a TI wl1835 wireless module. This board can be indentified by the GW1x value after A335BNLT (BBB) in the at24 eeprom: GW1x [aa 55 33 ee 41 33 33 35 42 4e 4c 54 47 57 31 41 |.U3.A335BNLTGW1A|] http://beagleboard.org/green-wireless http://wiki.seeed.cc/BeagleBone_Green_Wireless/ firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware wl18xx mac address: Stored in at24 eeprom at address 5-16: hexdump -e '8/1 "%c"' /sys/bus/i2c/devices/0-0050/eeprom | cut -b 5-16 Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tony Lindgren <tony@atomide.com> CC: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-28 00:58:37 +07:00
am335x-bonegreen-wireless.dtb \
ARM: dts: cm-t335: add initial support Add basic support for CompuLab cm-t335 module based on AM335X SoC. CM-T335 is a tiny computer-on-module (CoM) / system-on-module (SoM) The module is built around the Texas Instruments Sitara AM3352/4 system-on-chip. The CPU is supplemented with up-to 512MB DDR3 and up-to 1GB of on-board NAND storage, WiFi connected to SPI, Bluetooth, Analog audio, Gigabit Ethernet, CAN bus. Current patch adds support: UART0 and GPIO LED Detailed description can be found at the module site: http://www.compulab.co.il/products/computer-on-modules/cm-t335/ Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> [uri.mashiach@compulab.co.il: the default RAM amount reduced to 128MB to support also the minimal module configuration] Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-24 21:02:08 +07:00
am335x-chiliboard.dtb \
am335x-cm-t335.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
am335x-evm.dtb \
am335x-evmsk.dtb \
ARM: dts: am335x: Add initial support for ICEv2 board TI's Industrial Communication Engine EVM is a low cost hardware mainly developed for industrial communication type applications using serial or Ethernet based interfaces. This platform features TI's AM3359 with 800MHz single core Cortex-A8 processor, 256MB DDR3, 64MB SPI flash, 8MB NOR Flash, mmc, usb, can, dual Ethernet ports. For more information, look at HW user guide[1], Data manual[2]. Just add basic support for the moment. [1] http://processors.wiki.ti.com/index.php/AM335x_Industrial_Communication_Engine_EVM_Rev2_1_HW_User_Guide [2] http://www.ti.com/lit/ds/symlink/am3359.pdf Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-23 10:34:13 +07:00
am335x-icev2.dtb \
ARM: dts: cm-t335: add initial support Add basic support for CompuLab cm-t335 module based on AM335X SoC. CM-T335 is a tiny computer-on-module (CoM) / system-on-module (SoM) The module is built around the Texas Instruments Sitara AM3352/4 system-on-chip. The CPU is supplemented with up-to 512MB DDR3 and up-to 1GB of on-board NAND storage, WiFi connected to SPI, Bluetooth, Analog audio, Gigabit Ethernet, CAN bus. Current patch adds support: UART0 and GPIO LED Detailed description can be found at the module site: http://www.compulab.co.il/products/computer-on-modules/cm-t335/ Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> [uri.mashiach@compulab.co.il: the default RAM amount reduced to 128MB to support also the minimal module configuration] Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-24 21:02:08 +07:00
am335x-lxm.dtb \
ARM: dts: am335x: add support for Moxa UC-8100-ME-T open platform Add support for Moxa UC-8100-ME-T open platform The UC-8100-ME-T computing platform is designed for embedded data acquisition industrial applications The features of UC-8100-ME-T series are: * eMMC * SPI flash * SD slot * 2x LAN * 2 RS-232/422/485 ports, software-selectable * Mini PCIe form factor with USB signal * USB host * EEPROM * TPM * Watchdog * RTC * User gpio-keys * User LEDs * User button Signed-off-by: SZ Lin <sz.lin@moxa.com> Acked-by: Rob Herring <robh@kernel.org> [tony@atomide.com: fix unit adress as suggested by Rob] Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-02 13:57:57 +07:00
am335x-moxa-uc-8100-me-t.dtb \
ARM: dts: Add devicetree for Gumstix Pepper board This adds the Gumstix Pepper[1] single-board computer based on the TI AM335x processor. Schematics are available [2]. [1] https://store.gumstix.com/index.php/products/344/ [2] https://pubs.gumstix.com/boards/PEPPER/ Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-06-11 05:22:00 +07:00
am335x-nano.dtb \
ARM: dts: am33xx: add PDU001 board This patch adds support for the PDU001 board from EETS GmbH. The board is built around the byteENGINE module AM335X from bytes at work AG which in turn is built around a Sitara SoC from TI. Signed-off-by: Felix Brack <fb@ltec.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-01-30 21:28:14 +07:00
am335x-pdu001.dtb \
ARM: dts: Add devicetree for NovaTech OrionLXm This adds the NovaTech OrionLXm which is based on the AM335x SoC http://www.novatechweb.com/substation-automation/orionlxm/ RAM: 512MiB Flash: 4GB eMMC Ethernet PHYs: 2x Micrel KSZ8041FTLI USB ports are used internally by the expansion cards. Internal micro SD slot is available. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-18 02:02:35 +07:00
am335x-pepper.dtb \
ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board The phyCORE-AM335x development kit is a combination of the phyCORE-AM335x SoM and a PCM-953 carrier board. The features of the PCM-953 are: * ETH phy on carrier board: 1x RGMII * 1x CAN * Up to 4x UART * USB0 (otg) * USB1 (host) * SD slot * User gpio-keys * User LEDs Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-24 17:09:34 +07:00
am335x-phycore-rdk.dtb \
ARM: dts: Add am335x-pocketbeagle PocketBeagle is an ultra-tiny-yet-complete open-source USB-key-fob computer. This board family can be indentified by the A335PBGL in the at24 eeprom: A2: [aa 55 33 ee 41 33 33 35 50 42 47 4c 30 30 41 32 |.U3.A335PBGL00A2|] http://beagleboard.org/pocket https://github.com/beagleboard/pocketbeagle Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tony Lindgren <tony@atomide.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Drew Fustini <drew@beagleboard.org> CC: Peter Robinson <pbrobinson@redhat.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-04-18 00:14:04 +07:00
am335x-pocketbeagle.dtb \
arm, am335x: add support for the bosch shc board add support for the am335x based shc board. UART: 0-2 and 4 DRAM: 512 MiB MMC: OMAP SD/MMC: 0 @ 26 MHz OMAP SD/MMC: 1 @ 26 MHz I2C: at24 eeprom, pcf8563 USB: USB1 (host) Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-17 15:24:15 +07:00
am335x-shc.dtb \
ARM: dts: cm-t335: add support for SBC-T335 Add basic support for the SBC-T335. CompuLab SBC-T335 is a single baseboard computer. The SBC-T335 is based on the Texas Instruments Cortex-A8 Sitara AM3354 SoC. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-13 15:55:36 +07:00
am335x-sbc-t335.dtb \
ARM: dts: cm-t335: add initial support Add basic support for CompuLab cm-t335 module based on AM335X SoC. CM-T335 is a tiny computer-on-module (CoM) / system-on-module (SoM) The module is built around the Texas Instruments Sitara AM3352/4 system-on-chip. The CPU is supplemented with up-to 512MB DDR3 and up-to 1GB of on-board NAND storage, WiFi connected to SPI, Bluetooth, Analog audio, Gigabit Ethernet, CAN bus. Current patch adds support: UART0 and GPIO LED Detailed description can be found at the module site: http://www.compulab.co.il/products/computer-on-modules/cm-t335/ Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> [uri.mashiach@compulab.co.il: the default RAM amount reduced to 128MB to support also the minimal module configuration] Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-24 21:02:08 +07:00
am335x-sl50.dtb \
ARM: dts: Add phyBOARD-WEGA-AM335x rdk phyBOARD-WEGA-AM335x represents a direct soldered combination of a phyCORE-AM335x SoM and carrier board. Different kind of SoM options can be connected to the wega carrier board. So we created a separate wega dtsi file. The final dts contains the actual SoM on the carrier board. WEGA carrier board features: * ETH phy on carrier board: 1x MII * 1x CAN * 2x UART * USB0 (device) * USB1 (host) * mSD slot Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-16 15:30:49 +07:00
am335x-wega-rdk.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_OMAP4) += \
ARM: dts: Add minimal support for motorola droid 4 xt894 Let's add minimal support for droid 4 with MMC and WLAN working. It can be booted with appended dtb using kexec to a state where MMC and WLAN work with currently no support for it's PMIC or display. Note that we are currently using fixed regulators as we don't have support for it's cpcap PMIC. I'll be posting regmap_spi based minimal cpcap patches later on for USB and the debug UART on droid 4 multiplexed with the USB connector. Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-12 23:57:59 +07:00
omap4-droid4-xt894.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
omap4-duovero-parlor.dtb \
ARM: dts: Amazon Kindle Fire (first generation) codename kc1 basic support The Amazon Kindle Fire (first generation) codename kc1 is a tablet that was released by Amazon back in 2011. It is using an OMAP4430 SoC GP version. This adds devicetree support for the device, with only a few basic features supported, such as debug uart, i2c and internal emmc. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-30 02:28:24 +07:00
omap4-kc1.dtb \
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 11:11:45 +07:00
omap4-panda.dtb \
ARM: dts: Add build target for omap4-panda-a4 Commit 0d9250c (ARM: dts: omap4-panda: Add pinmux configuration for HDMI) added a new device-tree source file for Rev A4 of the OMAP4430 Panda board but it did not add this version to the makefile. Hence, add this file to the makefile. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-15 04:55:39 +07:00
omap4-panda-a4.dtb \
ARM: dts: OMAP: Rename pandaES and var_som for consistency Rename the files to have names consistent across OMAP boards. Update the Makefile to use the new name. Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-24 17:31:34 +07:00
omap4-panda-es.dtb \
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 11:11:45 +07:00
omap4-sdp.dtb \
ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs target When making the dtbs target on OMAP/AM35xx, some trees are not built. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-05-31 21:05:51 +07:00
omap4-sdp-es23plus.dtb \
ARM: dts: Add support for OMAP4 VAR-DVK-OM44 Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-13 01:32:01 +07:00
omap4-var-dvk-om44.dtb \
ARM: dts: Add support for OMAP4 Variscite OM44 family Add support for VAR-SOM-OM44[1] SODIMM system on module from Variscite. SoM features a OMAP4460, 1GB RAM, Gigabit Ethernet (LAN7500) and optional WLAN/BT. Also add support for VAR-STK-OM44 development board from Variscite. This kit features a VAR-SOM-OM44 and the carrier board VAR-OM44CustomBoard[2]. The VAR-STK-OM44 is the same as VAR-DVK-OM44 but without the LCD display. omap4-var-stk-om44.dts replace the old and very limited omap4-var-som.dts. [1] http://www.variscite.com/products/system-on-module-som/cortex-a9/var-som-om44-cpu-ti-omap-4-omap4460 [2] http://www.variscite.com/products/single-board-computers/var-om44customboard Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-13 01:32:00 +07:00
omap4-var-stk-om44.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_AM43XX) += \
am43x-epos-evm.dtb \
ARM: dts: am437x: cm-t43: add basic support for sbc-t43 Add basic support for SBC-T43: a CM-T43 based single board computer. CM-T43 is an AM437x based System-on-Module designed to serve as a building block in embedded applications. SBC-T43 is composed of CM-T43 module on top of the SB-SOM-T43 baseboard. Basic support includes UART, GPIO, and I2C. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Rob Herring <robh@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-01 20:54:56 +07:00
am437x-cm-t43.dtb \
am437x-gp-evm.dtb \
ARM: dts: add support for AM437x IDK The AM437x Industrial Development Kit (IDK) is an application development platform targeted at industrial communication and control applications. It comes with a 3-phase motor driver, PROFINET, PROFIBUS and a few other industrial communication interfaces. The board has 1GiB of DDR3 RAM, QSPI NOR flash, a 100% discrete power design (no PMIC) and an on-board 2MP camera (not supported with Linux as of this writing). Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 05:30:14 +07:00
am437x-idk-evm.dtb \
ARM: dts: am437x: cm-t43: add basic support for sbc-t43 Add basic support for SBC-T43: a CM-T43 based single board computer. CM-T43 is an AM437x based System-on-Module designed to serve as a building block in embedded applications. SBC-T43 is composed of CM-T43 module on top of the SB-SOM-T43 baseboard. Basic support includes UART, GPIO, and I2C. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Rob Herring <robh@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-01 20:54:56 +07:00
am437x-sbc-t43.dtb \
am437x-sk-evm.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_OMAP5) += \
omap5-cm-t54.dtb \
ARM: dts: Add basic support for isee igepv5 With omap5-board-common.dtsi, we can now easily add support for various omap5 board variants. Let's add minimal support for isee igepv5. So far I've tested that basic things work, such as serial, USB Ethernet, HDMI and WLAN. Note that like omap5-uevm, these boards seem to need to reserve 16MB for a trap section as in commit 03178c66d289 ("ARM: dts: omap5-evm: Update available memory to 2032 MB") and also noted in a u-boot commit at http://marc.info/?l=u-boot&m=134376852603255 and also at http://patchwork.ozlabs.org/patch/159881/. Not sure why this is not needed for omap5-cm-t54.dts, maybe because of different u-boot configuration. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-10-17 02:32:33 +07:00
omap5-igep0050.dtb \
ARM: dts: sbc-t54: add support for sbc-t54 with cm-t54 Add support for CM-T54 CoM and SBC-T54 board: http://compulab.co.il/products/computer-on-modules/cm-t54/ http://compulab.co.il/products/sbcs/sbc-t54/ SBC-T54 is a single board computer based on OMAP5432 CPU. It is implemented with a CM-T54 CoM providing most of the functions, and SB-T54 carrier board providing connectors and several additional functions. Added basic support for: * PMIC * LED * MMC/SD * eMMC * USB * I2C1/4 * SB-T54 and CM-T54 EEPROMs * RTC Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> [tony@atomide.com: updated for Makefile sorting] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-28 18:41:44 +07:00
omap5-sbc-t54.dtb \
omap5-uevm.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_DRA7XX) += \
ARM: dts: Add am57xx-beagle-x15 BeagleBoard-X15 is the next generation Open Source Hardware BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15 processor. The platform features 2GB DDR3L (w/dual 32bit busses), eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G Ethernet. For more information, refer to: BeagleBoard-X15 Wiki: http://www.elinux.org/Beagleboard:BeagleBoard-X15 AM5728 is part of the Sitara product family whose additional details will be available: http://www.ti.com/lsds/ti/arm/overview.page Technical Reference Manual for AM5728 is public domain at: http://www.ti.com/lit/spruhz6 Just add basic support for the moment, the following updates are needed: i) Ethernet - depends on SoC dts fixes ii) USB Client (USB2) - depends on GPIO extcon ii) HDMI - additional driver fixes pending iii) Audio - additional driver fixes pending NOTE: AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All unused power supply balls must be supplied with the voltages specified in the Section 5.2, Recommended Operating Conditions". This implies that all unused voltage rails for AM5728 can never be switched off even if the hardware blocks inside that voltage domain is unused. Switching off these unused rails may result in stability issues on other domains and increased leakage and power-on-hour impacts. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-08 00:47:13 +07:00
am57xx-beagle-x15.dtb \
ARM: dts: am57xx-beagle-x15: Add support for rev B1 Latest update to the BeagleBoard-X15 platform (revision B1)[1] updates for allowing UHS SD cards to function with the split of supply to SD card from a dedicated LDO. As a result of this, AM57xx BeagleBoard-X15 now uses gpio2_30 instead of gpio6_28 for HDMI because HDMI_LS_OE should now be switched from GPIO6_28(Y9) to GPIO2_30 (AG8) to avoid a 1.8V GPIO toggling a 3.3V SoC input when the SD card is in UHS 1.8V mode. NOTE: For UHS mode to function, we need full fledged IODelay support in kernel to be functional. IODelay support is yet to be added. Further, It does not make much sense to spin off a new board compatible flag since there is no real functional benefit for the same. Note: Even though production version is supposed to be B1, there is over ~200 boards of previous version (A2)[2] out there which continue to get supported with the existing dts file (to maintain compatibility with existing bootloaders for A2) and the production board is now supported as revb1. [1] https://github.com/beagleboard/beagleboard-x15/blob/master/BEAGLEBOARD_X15_REV_B1.pdf [2] http://marc.info/?l=linux-arm-kernel&m=147273929820708&w=2 Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-03 00:14:45 +07:00
am57xx-beagle-x15-revb1.dtb \
ARM: dts: am57xx-beagle-x15: Add support for rev C Latest update to the BeagleBoard-X15 platform (revision C). This board contains a silicon update (Rev 2.0), which includes a fix for the 2nd ethernet phy when running at 1000 Mbps speeds. This board can be indentified by the [C.00] after [BBRDX15_] in the at24 eeprom: [BBRDX15_C.001731PX150249] Rev C is now in full production and boards are available for end users. https://beagleboard.org/x15 https://github.com/beagleboard/beagleboard-x15/ Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tony Lindgren <tony@atomide.com> CC: Nishanth Menon <nm@ti.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Drew Fustini <drew@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-16 23:50:53 +07:00
am57xx-beagle-x15-revc.dtb \
ARM: dts: am57xx: cl-som-am57x: add basic module support Add support for CompuLab CM-SOM-AM57X board. CL-SOM-AM57x is a miniature System-on-Module (SoM) based on TI Sitara AM57x ARM Cortex-A15 System-on-Chip family. https://www.compulab.co.il/products/computer-on-modules/cl-som-am57x-ti-am5728-am5718-system-on-module/ Add basic DT support for standalone module (without a carrier board): * Memory configuration * Heartbeat led * I2C1 and I2C4 * PMIC * SATA Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-02 01:03:03 +07:00
am57xx-cl-som-am57x.dtb \
ARM: dts: am57xx: sbc-am57x: add basic board support SBC-AM57x is a single board computer designed for industrial and embedded applications. It is based on the Texas Instruments Sitara AM57x system-on-chip family. SBC-AM57x is implemented with the CL-SOM-AM57x computer-on-module providing most of the functions, and SB-SOM-AM57x carrier board providing additional peripheral functions and connectors. https://www.compulab.co.il/products/sbcs/sbc-am57x-ti-am5728-am5718-single-board-computer/ https://www.compulab.co.il/products/computer-on-modules/cl-som-am57x-ti-am5728-am5718-system-on-module/ Add basic board support, including UART3, used as a serial console. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-02 01:03:13 +07:00
am57xx-sbc-am57x.dtb \
ARM: dts: AM572x-IDK Initial Support The AM572x-IDK board is a board based on TI's AM5728 SOC which has a dual core 1.5GHz A15 processor. This board is a development platform for the Industrial market with: - 2GB of DDR3L - Dual 1Gbps Ethernet - HDMI, - PRU-ICSS - uSD - 16GB eMMC - CAN - RS-485 - PCIe - USB3.0 - Video Input Port - Industrial IO port and expansion connector The link to the data sheet and TRM can be found here: http://www.ti.com/product/AM5728 This patch creates a common dtsi file that will provide a common board dtsi file to define the nodes that are common to AM57xx (including the upcoming AM5718) IDK boards. Initial support is only for basic peripherals Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-28 23:35:09 +07:00
am572x-idk.dtb \
ARM: dts: AM571x-IDK Initial Support The AM571x-IDK board is a board based on TI's AM5718 SOC which has a single core 1.5GHz A15 processor. This board is a development platform for the Industrial market with: - 1GB of DDR3L - Dual 1Gbps Ethernet - HDMI, - PRU-ICSS - uSD - 16GB eMMC - CAN - RS-485 - PCIe - USB3.0 - Video Input Port - Industrial IO port and expansion connector The link to the data sheet and TRM can be found here: http://www.ti.com/product/AM5718 Initial support is only for basic peripherals. Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-22 11:17:32 +07:00
am571x-idk.dtb \
ARM: dts: am57xx: Add support for am574x-idk am574x-idk is similar to am572x-idk with am574x SoC. So create a common file for both evms and include SoC dtsi as needed. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-18 13:20:03 +07:00
am574x-idk.dtb \
ARM: dts: am57xx: cl-som-am57x: add basic module support Add support for CompuLab CM-SOM-AM57X board. CL-SOM-AM57x is a miniature System-on-Module (SoM) based on TI Sitara AM57x ARM Cortex-A15 System-on-Chip family. https://www.compulab.co.il/products/computer-on-modules/cl-som-am57x-ti-am5728-am5718-system-on-module/ Add basic DT support for standalone module (without a carrier board): * Memory configuration * Heartbeat led * I2C1 and I2C4 * PMIC * SATA Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-02 01:03:03 +07:00
dra7-evm.dtb \
ARM: dts: Add support for dra72-evm rev C (SR2.0) DRA72-EVM now has an upgrade to Rev C with SR2.0 silicon. As part of this change, a few updates were factored in that were software incompatible with previous board in few areas: - We now use DP83867 ethernet phy instead of older DP838865 which fails in certain use cases. - Two Ethernet ports now instead of the single one in rev B. - polarities changed for certain pcf gpios - Due to SoC phy current requirements, VDDA supplies are split between ldo3 and ldo2 (ldo2 was previously unused). NOTE: DSS (VDDA_VIDEO) is still supplied by ldo5, HDMI is now supplied by LDO2 instead of using LDO3. NOTE: It does not make much sense to spin off a new board compatible flag since there is no real benefit for the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-15 00:45:58 +07:00
dra72-evm.dtb \
ARM: dts: Add support for dra718-evm The DRA718-evm is a board based on TI's DRA718 processor targeting BOM-optimized entry infotainment systems and is a reduced pin and software compatible derivative of the DRA72 ES2.0 processor. This platform features: - 2GB of DDR3L - Dual 1Gbps Ethernet - HDMI, - uSD - 8GB eMMC - CAN - PCIe - USB3.0 - Video Input Port - LP873x PMIC More information can be found here[1]. Adding support for this board while reusing the data available in dra72-evm-common.dtsi. [1] http://www.ti.com/product/dra718 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-10-21 17:38:39 +07:00
dra72-evm-revc.dtb \
ARM: dts: Add support for dra76-evm dra76-evm is a board based on TI's dra76 processor targeting for infotainment systems. Adding support for this platform. dra76-evm and dra7-evm has a similar layout except with few differences. So create a dra7-evm-common.dtsi with similarities on dra76-evm and dra7-evm. Include this common dtsi in both dra7-evm.dts and dra76-evm.dts Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-12 11:06:05 +07:00
dra71-evm.dtb \
dra76-evm.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_ORION5X) += \
ARM: dts: orion5x: add device tree for kurobox-pro Add dts file to support Buffalo/Revogear Kurobox-Pro, which is marvell orion5x based 3.5" HDD NAS. It's a quite old product and already discontinued. So there's no official website for it. But it was an early product which used marvell orion5x 88F5182 chipset, it's popular in the community. Some unofficial site: - http://buffalo.nas-central.org/wiki/Category:KuroboxPro - http://nice.kaze.com/KUROPRO_ProductSpecifications.pdf This device tree is based on the board file: arch/arm/mach-orion5x/kurobox_pro-setup.c However, the probing order of NAND and JEDEC-Flash are different from the original board file, this results in incompatible minor number for a few /dev/mtdX and /dev/mtdblockX devices. So I still want to keep the board file for the time being. Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-03-29 23:11:45 +07:00
orion5x-kuroboxpro.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
orion5x-lacie-d2-network.dtb \
ARM: orion5x: convert d2net to Device Tree This commit converts the LaCie d2 Network platform to the Device Tree. All devices except LEDs are converted, because the LED code needs a non-LED GPIO to be set to a given value for the LEDs to work, and this cannot yet be easily represented in DT. Also, references to the LaCie Big Disk Network platform are lost, because this platform apparently has exactly the same hardware support as the LaCie d2 Network, so their Device Tree files would be identical. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1398202002-28530-36-git-send-email-thomas.petazzoni@free-electrons.com Cc: Simon Guinot <sguinot@lacie.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-23 04:26:39 +07:00
orion5x-lacie-ethernet-disk-mini-v2.dtb \
ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl Add dts file to support Buffalo Linkstation LS-GL (a.k.a Buffalo Linkstation Pro/Live), which is marvell orion5x based 3.5" HDD NAS. Product info: - (JPN) http://buffalo.jp/products/catalog/item/l/ls-gl/ - (ENG) http://www.buffalotech.com/products/network-storage/linkstation/linkstation-pro This device tree is based on the board file: arch/arm/mach-orion5x/kurobox_pro-setup.c However, that board file also support Kurobox Pro, which is not supported by device tree yet. So the board file is not removed. Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-02-06 12:59:53 +07:00
orion5x-linkstation-lsgl.dtb \
ARM: dts: orion5x: add buffalo linkstation ls-wtgl Add dts file to support Buffalo Linkstation LS-WTGL, which is marvell orion5x based 2-bay 3.5" HDD NAS. Product info: - (JPN) http://buffalo.jp/products/catalog/storage/ls-wtgl_r1/ - (ENG) http://www.buffalotech.com/support-and-downloads/download/LinkStation_Pro_Duo_Manual_web.pdf Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-07-21 21:49:16 +07:00
orion5x-linkstation-lswtgl.dtb \
ARM: orion5x: fix Makefile for linkstation-lschl.dtb The rename of orion5x-lschl.dts needs to be reflected in the Makefile: make[3]: *** No rule to make target 'arch/arm/boot/dts/orion5x-lschl.dtb', needed by '__build'. Fixes: 6cfd3cd8d836 ("ARM: dts: orion5x-lschl: More consistent naming on linkstation series") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-02-02 18:38:33 +07:00
orion5x-linkstation-lschl.dtb \
ARM: dts: Convert Linkstation Mini to Device Tree The title says it all. The name of the dts file as been changed to better reflect the manufacturer's device name (LS-WSGL), rather than the original "lsmini", which exists in a kirkwood version too. [gregory.clement@free-electrons.com]: use tab instead of space to indent dts at line 185. Reslove merge conflict with patch "ARM: dts: orion5x: add buffalo linkstation ls-wtgl" in the file arch/arm/boot/dts/Makefile. Signed-off-by: Benjamin Cama <benoar@dolka.fr> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Alexey Kopytko <alexey@kopytko.ru> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-08-06 23:29:52 +07:00
orion5x-lswsgl.dtb \
ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree This commit converts the Maxtor Shared Storage II Orion5x platform to the Device Tree. The only remaining things not converted are PCI and the special power off method. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1398202002-28530-37-git-send-email-thomas.petazzoni@free-electrons.com Cc: Sylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-23 04:26:40 +07:00
orion5x-maxtor-shared-storage-2.dtb \
ARM: dts: orion5x: Add description for Netgear WNR854T This is a router based on the mv88f5181 chipset. http://www.netgear.com/support/product/WNR854T.aspx http://wiki.openwrt.org/toh/netgear/wnr854t [gregory.clement@free-electrons.com: - extract dt part from "arm: orion5x: Add DT-based support for Netgear WNR854T" - squashed "arm: orion5x: Alias uart0 to serial0 for all orion5x" into this commit and move serial0 alias from dtsi to dts] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 21:47:26 +07:00
orion5x-netgear-wnr854t.dtb \
ARM: orion5x: convert RD-88F5182 to Device Tree This commit converts the RD-88F5182 platform to the Device Tree. All devices except the PCI are converted to the Device Tree. It is worth noting that: * The PCI description for the DT case is kept in board-rd88f5182.c. * The existing non-DT support in rd88f5182-setup.c is kept as is, in order to allow testing of a given platform in both DT and non-DT cases. It will ultimately be removed, once we no longer care about non-DT support for Orion5x. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1398202002-28530-35-git-send-email-thomas.petazzoni@free-electrons.com Cc: Ronen Shitrit <rshitrit@marvell.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-23 04:26:38 +07:00
orion5x-rd88f5182-nas.dtb
ARM: dts: Add Actions Semi S500 and LeMaker Guitar Add Device Trees for Actions Semiconductor S500 SoC and LeMaker Guitar SoM and base board. Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-02-15 17:15:20 +07:00
dtb-$(CONFIG_ARCH_ACTIONS) += \
ARM: dts: owl-s500: Add CubieBoard6 Add a Device Tree for Cubietech CubieBoard6. Cc: support@cubietech.com Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-09-09 22:43:49 +07:00
owl-s500-cubieboard6.dtb \
arm: dts: owl-s500: Add Sparky Add a Device Tree for the Allo.com Sparky SBC. Acked-by: Sudeep Kumar <sudeepkumar@cem-solutions.net> [AF: Adjusted SPDX-License-Identifier style] Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-10-12 08:05:56 +07:00
owl-s500-guitar-bb-rev-b.dtb \
owl-s500-sparky.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
ARM: boot: dts: Add Western Digital My Book World Edition device tree Add Western Digital My Book World Edition device tree based on Oxford Semiconductor OX810SE SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-03-03 16:53:57 +07:00
dtb-$(CONFIG_ARCH_OXNAS) += \
ARM: dts: rename oxnas dts files Other platforms' device-tree files start with a platform prefix, such as sun7i-a20-*.dts or at91-*.dts. This naming scheme turns out to be handy when using multi-platform build systems such as OpenWrt. Prepend oxnas files with their platform prefix to comply with the naming scheme already used for most other platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-14 00:35:59 +07:00
ox810se-wd-mbwe.dtb \
ox820-cloudengines-pogoplug-series-3.dtb
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees Add basic APQ8064 SoC include device tree and support for basic booting on the IFC6410 board. Also, keep dtb build list and qcom_dt_match in sorted order. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-04-04 02:48:22 +07:00
dtb-$(CONFIG_ARCH_QCOM) += \
ARM: dts: add Qualcomm APQ8060-based Dragonboard This is the first Dragonboard based on APQ8060 and PM8058. It was produced in 2011 in cooperation between Qualcomm and BSQUARE. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-18 03:28:12 +07:00
qcom-apq8060-dragonboard.dtb \
ARM: dts: apq8064: rename db600c to SD_600eval This board has been renamed recently and announced at https://eragon.einfochips.com/products/sd-600eval.html So rename this board files so that it reflects actual product in market. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-11 01:19:54 +07:00
qcom-apq8064-arrow-sd-600eval.dtb \
ARM: dts: qcom: add CM-QS600 board CM-QS600 is a APQ8064 based computer on module. The details are available at http://compulab.co.il/products/computer-on-modules/cm-qs600/ Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-10-01 23:09:11 +07:00
qcom-apq8064-cm-qs600.dtb \
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees Add basic APQ8064 SoC include device tree and support for basic booting on the IFC6410 board. Also, keep dtb build list and qcom_dt_match in sorted order. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-04-04 02:48:22 +07:00
qcom-apq8064-ifc6410.dtb \
ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts This introduces initial support for the Sony Xperia Z smartphone, including support for UART, MMC, USB gadget and physical buttons. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-10-23 01:13:51 +07:00
qcom-apq8064-sony-xperia-yuga.dtb \
devicetree: Add DTS file to support the Nexus7 2013 (flo) device. This patch adds a dts file to support the Nexus7 2013 device. Its based off of the qcom-apq8064-ifc6410.dts which is similar hardware. Also includes some comments and context folded in from Vinay Simha BN <simhavcs@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-02-06 02:21:05 +07:00
qcom-apq8064-asus-nexus7-flo.dtb \
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees Add basic APQ8064 SoC include device tree and support for basic booting on the IFC6410 board. Also, keep dtb build list and qcom_dt_match in sorted order. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-04-04 02:48:22 +07:00
qcom-apq8074-dragonboard.dtb \
ARM: dts: qcom: Add initial IFC6540 board device tree Add basic support for the IFC6540 single-board computer boards, that are based on the APQ8084 SoC. This patch adds the initial device tree and the neccessary nodes required for enabling the serial port and eMMC. Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-09-03 23:50:31 +07:00
qcom-apq8084-ifc6540.dtb \
ARM: dts: qcom: Add APQ8084-MTP board support Add device-tree file for APQ8084-MTP board, which belongs to the Snapdragon 805 family. Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-05-23 22:12:30 +07:00
qcom-apq8084-mtp.dtb \
dts: ipq4019: Add support for IPQ4019 DK01 board Initial board support dts files for DK01 board. Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2015-11-20 06:19:32 +07:00
qcom-ipq4019-ap.dk01.1-c1.dtb \
ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file Reviewed-by: Abhishek Sahu <absahu@codeaurora.org> Tested-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25 13:11:15 +07:00
qcom-ipq4019-ap.dk04.1-c1.dtb \
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file Reviewed-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25 13:11:16 +07:00
qcom-ipq4019-ap.dk04.1-c3.dtb \
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file Reviewed-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25 13:11:18 +07:00
qcom-ipq4019-ap.dk07.1-c1.dtb \
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file Reviewed-by: Abhishek Sahu <absahu@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25 13:11:19 +07:00
qcom-ipq4019-ap.dk07.1-c2.dtb \
ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees Add basic IPQ8064 SoC include device tree and support for basic booting on the AP148 Reference board with support for UART, I2C, and SPI. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-03-07 23:56:59 +07:00
qcom-ipq8064-ap148.dtb \
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees Add basic APQ8064 SoC include device tree and support for basic booting on the IFC6410 board. Also, keep dtb build list and qcom_dt_match in sorted order. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-04-04 02:48:22 +07:00
qcom-msm8660-surf.dtb \
ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone This DTS has support for the Sony Xperia Z1 phone (codenamed Honami). This first version of the DTS supports just a serial console. Signed-off-by: Tim Bird <tim.bird@sonymobile.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-10-01 05:49:49 +07:00
qcom-msm8960-cdp.dtb \
ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone This DTS has support for the Fairphone 2 (codenamed FP2). This first version of the DTS supports just the serial console via the MSM UART pins. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-11 18:02:25 +07:00
qcom-msm8974-fairphone-fp2.dtb \
ARM: dts: qcom: Add initial DTS for LG Nexus 5 Phone This DTS file have support LG Nexus 5 (codenamed hammerhead). Initial version have support for just serial console over headphone jack. Cc: Andy Gross <andy.gross@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Bhushan Shah <bshah@kde.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-07-29 13:09:06 +07:00
qcom-msm8974-lge-nexus5-hammerhead.dtb \
ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S5 phone This DTS has support for the Samsung Galaxy S5 (codenamed klte). Initial version have support just for serial console. Cc: Andy Gross <andy.gross@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Daniele Debernardi <drebrez@gmail.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-01-09 08:15:13 +07:00
qcom-msm8974-samsung-klte.dtb \
ARM: dts: qcom: msm8974: Add Sony Xperia Z1 Compact This patch adds a DTS file for Sony Xperia Z1 Compact with support for regulators, serial UART, eMMC/SD-card, USB, charger, backlight, coincell and buttons. Work based on arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts. Signed-off-by: Attila Szöllősi <ata2001@airmail.cc> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-03 11:09:18 +07:00
qcom-msm8974-sony-xperia-amami.dtb \
ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet This adds a basic DTS file for the Sony Xperia Z2 Tablet, containing definitions for regulators, eMMC/SD-card, USB, WiFi, Touchscreen, charger, backlight, coincell and buttons. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-05 01:58:54 +07:00
qcom-msm8974-sony-xperia-castor.dtb \
ARM: dts: Add WP8548 based MangOH Green board DTS Add support for the Sierra Wireless MangOH Green board with the Sierra Wireless WP8548 Module. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-23 18:39:06 +07:00
qcom-msm8974-sony-xperia-honami.dtb \
qcom-mdm9615-wp8548-mangoh-green.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_REALVIEW) += \
ARM: realview: add device tree for PB11MPCore This adds a device tree for the ARM RealView ARM11MPCore reference design. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-08 16:11:48 +07:00
arm-realview-pb1176.dtb \
ARM: dts: realview: support all the RealView EB board variants The ARM RealView Evaluation Baseboards are basically these: - The original ARMv5 EB board with an ARM926EJ-S, ARM1136 or ARM1176 core tile here described in arm-realview-eb.dts no matter which of these core tiles is being used. This can be emulated by QEMU "realview-eb" machine, which by default will have the ARM926EJ-S core tile. - The same board with one of three MPCore Core tiles: ARM11MPCore, not to be confused with the similar ARM PB11MPCore ARM11MPCore test system. This exist in two revisions: - Revision A modeled in arm-realview-eb-11mp.dts - Revision B modeled arm-realview-eb-11mp-revb.dts Revision B can be emulated by the QEMU "realview-eb-mpcore" machine, but to match the hardware also the argument -smp cpus=4 must be passed so that it has four CPU cores, like the hardware. There is also evidently from the code in the kernel a Cortex-A9 core tile for the EB, and this is modeled in arm-realview-eb-a9mp.dts based on the kernel boardfile. I have not found a user guide for this EB core tile on the ARM website and it seems uncommon. It is however included for completeness. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-18 20:23:31 +07:00
arm-realview-pb11mp.dtb \
arm-realview-eb.dtb \
ARM: dts: add device tree for the RealView EB Rev D The RealView EB baseboard revision D is a special case as it appears to be undocumented in ARM official documents, while the Linux kernel still contains special code for handling it. commit be4f3c8691492934c8ee03dbecb3a3a865ac6cd6 "Add RealView/EB support for the LAN9118 Ethernet chip" adds support for the SMSC LAN9118 chip used on the D revision of the baseboard, but no other traces of hardware deviations for this variant can be found. This creates a separate top-level .dts file especially for this board version, so that it gets registered with the right type of ethernet controller. The ethernet controller modifications are then put into a separate .dtsi file so it can be overlaid on other EB variants using the revision D baseboard. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-08 16:17:14 +07:00
arm-realview-eb-bbrevd.dtb \
ARM: dts: realview: support all the RealView EB board variants The ARM RealView Evaluation Baseboards are basically these: - The original ARMv5 EB board with an ARM926EJ-S, ARM1136 or ARM1176 core tile here described in arm-realview-eb.dts no matter which of these core tiles is being used. This can be emulated by QEMU "realview-eb" machine, which by default will have the ARM926EJ-S core tile. - The same board with one of three MPCore Core tiles: ARM11MPCore, not to be confused with the similar ARM PB11MPCore ARM11MPCore test system. This exist in two revisions: - Revision A modeled in arm-realview-eb-11mp.dts - Revision B modeled arm-realview-eb-11mp-revb.dts Revision B can be emulated by the QEMU "realview-eb-mpcore" machine, but to match the hardware also the argument -smp cpus=4 must be passed so that it has four CPU cores, like the hardware. There is also evidently from the code in the kernel a Cortex-A9 core tile for the EB, and this is modeled in arm-realview-eb-a9mp.dts based on the kernel boardfile. I have not found a user guide for this EB core tile on the ARM website and it seems uncommon. It is however included for completeness. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-18 20:23:31 +07:00
arm-realview-eb-11mp.dtb \
ARM: dts: split RealView EB 11MPCore variants There used to be two versions of the RealView EB 11MPCore: - arm-realview-eb-11mp.dts: the most common variant supported by QEMU with the revision C core tile - arm-realview-eb-revb.dts: for the variant with the elder revision B core tile. As it turns out that there are also a few variants of the baseboard, unrelated to the coretile, and that these can of course be mounted on top of each other in all permutations, we create: - arm-realview-eb-11mp.dts: the most common variant supported by QEMU with the pre-revision D baseboard and the revision C core tile. - arm-realview-eb-11mp-bbrevd.dts: the revision D baseboard with the common revision C core tile. - arm-realview-eb-11mp-ctrevb.dts: the pre-revision D baseboard with the revision B core tile. - arm-realview-eb-11mp-bbrevd-ctrevb.dts: the revision D baseboard with the revision B core time. Or as a table: | Core tile: C | Core tile: B -----------+----------------------------+----------------------------------- Baseboard: | | pre-D |arm-realvie-eb-11mp | arm-realview-eb-11mp-ctrevb -----------+----------------------------+----------------------------------- Baseboard: | | D |arm-realview-eb-11mp-bbrevd | arm-realview-eb-11mp-bbrevd-ctrevb -----------+----------------------------+----------------------------------- Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-08 22:00:45 +07:00
arm-realview-eb-11mp-bbrevd.dtb \
arm-realview-eb-11mp-ctrevb.dtb \
arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
ARM: dts: realview: DT support for the PBA8 and PBX-A9 This adds a devicetree for the ARM RealView PBA8 platform, also known as HBI-0178, "RealView Platform Baseboard for Cortex-A8" and PBX-A9 "RealView Platform Baseboard Explore for Cortex-A9" Tested in QEMU with -M realview-pb-a8, as well as with -M realview-pbx-a9 -smp cpus=2 Cc: Arnd Bergmann <arnd@arndb.de> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-23 22:51:35 +07:00
arm-realview-eb-a9mp.dtb \
ARM: dts: add RealView EB rev D A9 MPCore variant The Cortex A9 MPCore tile can be mounted on top of the revision D variant of the RealView EB, so create another variant of the DTS file for this. arm-realview-eb-a9mp = mounted on pre-revision D baseboard arm-realview-eb-a9mp-bbrevd = mounted on the revision D baseboard Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-09 03:50:39 +07:00
arm-realview-eb-a9mp-bbrevd.dtb \
ARM: dts: realview: DT support for the PBA8 and PBX-A9 This adds a devicetree for the ARM RealView PBA8 platform, also known as HBI-0178, "RealView Platform Baseboard for Cortex-A8" and PBX-A9 "RealView Platform Baseboard Explore for Cortex-A9" Tested in QEMU with -M realview-pb-a8, as well as with -M realview-pbx-a9 -smp cpus=2 Cc: Arnd Bergmann <arnd@arndb.de> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-23 22:51:35 +07:00
arm-realview-pba8.dtb \
arm-realview-pbx-a9.dtb
ARM: dts: renesas: Switch from ARCH_SHMOBILE_MULTI to ARCH_RENESAS Commit 9b5ba0df4ea4 ("ARM: shmobile: Introduce ARCH_RENESAS") started the migration from ARCH_SHMOBILE_MULTI to ARCH_RENESAS. Update the Makefile to build DTBs for Renesas platforms to use the new symbol, and move the Renesas section to preserve sort order. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-02-09 17:18:48 +07:00
dtb-$(CONFIG_ARCH_RENESAS) += \
emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
ARM: dts: r7s72100: Add support for GR-Peach Add device tree source for Renesas GR-Peach board. GR-Peach is an RZ/A1H based board with 10MB of on-chip SRAM and 8MB QSPI flash storage. Add support for the board, and create a 2MB partition to use as rootfs. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-24 02:20:54 +07:00
r7s72100-gr-peach.dtb \
ARM: dts: renesas: Switch from ARCH_SHMOBILE_MULTI to ARCH_RENESAS Commit 9b5ba0df4ea4 ("ARM: shmobile: Introduce ARCH_RENESAS") started the migration from ARCH_SHMOBILE_MULTI to ARCH_RENESAS. Update the Makefile to build DTBs for Renesas platforms to use the new symbol, and move the Renesas section to preserve sort order. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-02-09 17:18:48 +07:00
r7s72100-rskrza1.dtb \
r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
ARM: dts: iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1M Add support for iWave RainboW-G20D-Qseven board based on RZ/G1M. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-06-06 22:10:18 +07:00
r8a7743-iwg20d-q7.dtb \
ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB This patch adds a .dtsi that describes the camera daughter board and a .dts to describe the HW made of iWave's RZ/G1M SoM, iWave's RZ/G1M/G1N Qseven carrier board, and the camera daughter board. The camera daughter board .dtsi adds support for ttySC[14]. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-07 00:59:53 +07:00
r8a7743-iwg20d-q7-dbcm-ca.dtb \
ARM: dts: renesas: Switch from ARCH_SHMOBILE_MULTI to ARCH_RENESAS Commit 9b5ba0df4ea4 ("ARM: shmobile: Introduce ARCH_RENESAS") started the migration from ARCH_SHMOBILE_MULTI to ARCH_RENESAS. Update the Makefile to build DTBs for Renesas platforms to use the new symbol, and move the Renesas section to preserve sort order. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-02-09 17:18:48 +07:00
r8a7743-sk-rzg1m.dtb \
ARM: dts: iwg22d-sodimm: Add support for iWave G22D-SODIMM board Add support for iWave RainboW-G22D-SODIMM board based on RZ/G1E. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-15 17:54:20 +07:00
r8a7745-iwg22d-sodimm.dtb \
ARM: dts: iwg22d-sodimm-dbhd-ca: Add device tree for HDMI DB Add file r8a7745-iwg22d-sodimm-dbhd-ca.dts to provide support for iW-RainboW-G22D with HDMI daughter board plugged in. The interfaces defined in the new .dts file are: scif1, scif5, and hscif2. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-24 00:09:24 +07:00
r8a7745-iwg22d-sodimm-dbhd-ca.dtb \
ARM: dts: renesas: Switch from ARCH_SHMOBILE_MULTI to ARCH_RENESAS Commit 9b5ba0df4ea4 ("ARM: shmobile: Introduce ARCH_RENESAS") started the migration from ARCH_SHMOBILE_MULTI to ARCH_RENESAS. Update the Makefile to build DTBs for Renesas platforms to use the new symbol, and move the Renesas section to preserve sort order. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-02-09 17:18:48 +07:00
r8a7745-sk-rzg1e.dtb \
ARM: dts: iwg23s-sbc: Add support for iWave G23S-SBC based on RZ/G1C Add support for iWave iW-RainboW-G23S single board computer based on RZ/G1C. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-03 18:19:39 +07:00
r8a77470-iwg23s-sbc.dtb \
ARM: dts: renesas: Switch from ARCH_SHMOBILE_MULTI to ARCH_RENESAS Commit 9b5ba0df4ea4 ("ARM: shmobile: Introduce ARCH_RENESAS") started the migration from ARCH_SHMOBILE_MULTI to ARCH_RENESAS. Update the Makefile to build DTBs for Renesas platforms to use the new symbol, and move the Renesas section to preserve sort order. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-02-09 17:18:48 +07:00
r8a7778-bockw.dtb \
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
ARM: dts: stout: Initial r8a7790 Stout board support Stout base board support making use of 1 GiB of memory, the Renesas H2 r8a7790 SoC with the SCIFA0 serial port and CA15 with ARM architected timer. Furthermore, this device tree contains entries for: - 4x LEDs - SDHI SD/MMC controller - Display unit with HDMI output - SH fast ethernet controller - QSPI controller with S25FL512S attached to it - I2C controller with DA9210 and DA 9063 PMICs Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-16 01:49:19 +07:00
r8a7790-stout.dtb \
ARM: dts: renesas: Switch from ARCH_SHMOBILE_MULTI to ARCH_RENESAS Commit 9b5ba0df4ea4 ("ARM: shmobile: Introduce ARCH_RENESAS") started the migration from ARCH_SHMOBILE_MULTI to ARCH_RENESAS. Update the Makefile to build DTBs for Renesas platforms to use the new symbol, and move the Renesas section to preserve sort order. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-02-09 17:18:48 +07:00
r8a7791-koelsch.dtb \
r8a7791-porter.dtb \
r8a7792-blanche.dtb \
r8a7792-wheat.dtb \
r8a7793-gose.dtb \
r8a7794-alt.dtb \
r8a7794-silk.dtb \
sh73a0-kzm9g.dtb
ARM: dts: Build dtbs for Rockchip boards This allows the "make dtbs" target to work. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 05:17:50 +07:00
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
ARM: dts: rockchip: rename RK1108-evb to RV1108-evb Rockchip finally named the SOC as RV1108, so change it for compatible. The rk1108/rv1108 is completely new to the market, so there no real devices exist in the wild, only the Rockchip internal evaluation board. Therefore we're not breaking any existing devices when changing compatible values. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Acked-by: Rob Herring <robh@kernel.org> [added paragraph about no real devices existing] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-03-18 00:18:40 +07:00
rv1108-evb.dtb \
ARM: dts: rockchip: add rk3036-evb board Initial release for rk3036 sdk board. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 14:39:52 +07:00
rk3036-evb.dtb \
ARM: dts: rockchip: add the kylin board for rk3036 This patchset is the initiation version to try work for kylin board. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-17 21:21:50 +07:00
rk3036-kylin.dtb \
ARM: dts: Build dtbs for Rockchip boards This allows the "make dtbs" target to work. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 05:17:50 +07:00
rk3066a-bqcurie2.dtb \
ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066 This patch adds initial support for the Marsboard RK3066. It enables EMAC Rockchip which is the ethernet support on the board and registers it as a supported rockchip platform. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-02 17:20:01 +07:00
rk3066a-marsboard.dtb \
ARM: dts: rockchip: Add rk3066 MK808 board MK808 is a tv stick which has rockchip rk3066 CPU inside, two usb ports - host and otg, micro sd card slot and onboard wifi RK901. Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chip.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-09 03:22:30 +07:00
rk3066a-mk808.dtb \
ARM: dts: rockchip: add dts for ChipSPARK Rayeager PX2 board This add support for Rayeager PX2, Rockchip PX2 based development board made by ChipSPARK. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> Tested-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-25 19:39:36 +07:00
rk3066a-rayeager.dtb \
ARM: dts: rockchip: add rockchip PX3 Evaluation board PX3 EVB is designed by Rockchip for automotive field, with integrated CVBS (TP2825) / MIPI DSI / LVDS / HDMI video input/output interface, WIFI/BT/GPS (on a module named S500 which based on MT6620), Gsensor BMA250E and light&proximity sensor STK3410. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-09-11 00:44:00 +07:00
rk3188-px3-evb.dtb \
ARM: dts: Build dtbs for Rockchip boards This allows the "make dtbs" target to work. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 05:17:50 +07:00
rk3188-radxarock.dtb \
ARM: dts: rockchip: add rk3228-evb board Initial release for rk3228 sdk board. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-11 08:30:52 +07:00
rk3228-evb.dtb \
ARM: dts: rockchip: add support rk3229 evb board Initial release for rk3229 evb board, and turn the GMAC on. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-06-22 10:16:53 +07:00
rk3229-evb.dtb \
ARM: dts: Build dtbs for Rockchip boards This allows the "make dtbs" target to work. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 05:17:50 +07:00
rk3288-evb-act8846.dtb \
ARM: dts: rockchip: add dts for Firefly Firefly-RK3288 boards This adds support for Firefly-RK3288, Rockchip RK3288 based development boards made by Firefly. There are 2 dts for 2 versions of the board. rk3288-firefly-beta.dts is for the beta version, rk3288-firefly.dts is for the mass production version. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> [removed gmac reference, due to the gmac node going through the net-tree] Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-25 19:39:35 +07:00
rk3288-evb-rk808.dtb \
ARM: dts: rockchip: add dts for RK3288-Fennec boards This adds support for RK3288-Fennec boards. Currently supported are serial console, wired networking, hdmi output and USB. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-07 17:01:12 +07:00
rk3288-fennec.dtb \
ARM: dts: rockchip: add dts for Firefly Firefly-RK3288 boards This adds support for Firefly-RK3288, Rockchip RK3288 based development boards made by Firefly. There are 2 dts for 2 versions of the board. rk3288-firefly-beta.dts is for the beta version, rk3288-firefly.dts is for the mass production version. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> [removed gmac reference, due to the gmac node going through the net-tree] Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-25 19:39:35 +07:00
rk3288-firefly-beta.dtb \
ARM: dts: rockchip: add Netxeon R89 board This board is used in some TV-boxes like for example the Beelink R89 or Tronsmart R28. The board itself follows the reference design for the most part. But there are no schematics available it seems, so some things should be taken with a grain of salt. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Romain Perier <romain.perier@gmail.com>
2015-05-27 02:50:09 +07:00
rk3288-firefly.dtb \
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 22:32:32 +07:00
rk3288-firefly-reload.dtb \
ARM: dts: rockchip: add MiQi board from mqmaker The MiQi is a rk3288-based devboard from Shenzen based mqmaker, with a footprint the size of a credit card. Main available outside connections are 4 usb ports, hdmi, gigabit ethernet and two expansion headers. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-04-18 05:44:03 +07:00
rk3288-miqi.dtb \
ARM: dts: rockchip: Add support for PCM-947 carrier board Add basic support for the PCM-947 carrier board, a RK3288 based development board made by PHYTEC. This board works in a combination with the phyCORE-RK3288 System on Module. Following interfaces and devices are available on the PCM-947 carrier board: - 2x UART - micro SDMMC - USB host and USB otg - USB 3503 HSIC hub - Ethernet - 2nd alternative KSZ9031 ethernet phy - Display connectors: PHYTEC LVDS, DDG LVDS, parallel signals, HDMI - Parallel Camera CIF - SGTL5000-32QFN audio codec - 4x LEDs connected via PCA9533 - 2 user buttons - Expansion connectors for WiFi and other modules - RTC RV-4162-C7 - Resistive touch STMPE811 - EEPROM M24C32 Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-04-06 20:04:25 +07:00
rk3288-phycore-rdk.dtb \
ARM: dts: rockchip: add rk3288-popmetal board to dtb list The popmetal board was not included in the list of Rockchip boards, so was only built when explicitly called with make rk3288-popmetal.dtb but not in a generic make dtbs, so add the missing entry. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-10-01 01:49:38 +07:00
rk3288-popmetal.dtb \
ARM: dts: rockchip: add veyron-jerry board The Hisense Chromebook C11, also named jerry. Signed-off-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org>
2015-07-08 01:04:32 +07:00
rk3288-r89.dtb \
ARM: dts: rockchip: Add dtb for the Radxa Rock 2 Square board The Radxa Rock 2 Square board is a combination of the Radxa Rock 2 SoM with the Square baseboard. Add a dtsi for the SoM which can be included into the dts for the various baseboards (e.g. full and square) and a dts for the square board. Currently supported are serial console, wired networking, hdmi output, eMMC and SD storage and USB. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-09-15 13:57:21 +07:00
rk3288-rock2-square.dtb \
ARM: dts: rockchip: add dts for RK3288-Tinker board This patch add basic support for RK3288-Tinker board. We can boot in to rootfs with this patch. Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-02-14 17:07:31 +07:00
rk3288-tinker.dtb \
ARM: dts: rockchip: add veyron-brain board Similar to pinky, brain is a development model and probably also nearing extinction. But to keep pinky from being lonely I'll keep the two brain boards around as well, especially as they as well have easily accessible dut-connectors. Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> For the license change: Acked-by: Brian Norris <briannorris@chromium.org>
2015-11-30 21:29:11 +07:00
rk3288-veyron-brain.dtb \
ARM: dts: rockchip: add veyron-jaq board a.k.a. Haier Chromebook 11, and others Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-08-25 05:58:03 +07:00
rk3288-veyron-jaq.dtb \
ARM: dts: rockchip: add veyron-pinky board While pinky was one of the earlier development models, is on the list of endangered species today and nearly extinct, I want to keep mine around for the foreseeable future after spending all the time making a nice hole into the base below the dut-connector. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-07-08 01:09:34 +07:00
rk3288-veyron-jerry.dtb \
ARM: dts: rockchip: add veyron-mickey board Also known as the Asus Chromebit. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Caesar Wang <wxt@rock-chips.com> For the license change: Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-01 23:03:04 +07:00
rk3288-veyron-mickey.dtb \
ARM: dts: rockchip: add veyron-minnie board Also known as the Asus Chromebook Flip. Signed-off-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2015-07-30 01:57:20 +07:00
rk3288-veyron-minnie.dtb \
ARM: dts: rockchip: Add veyron-speedy board Which is formally known as the Asus C201 chromebook Signed-off-by: Romain Perier <romain.perier@gmail.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-07-23 23:50:49 +07:00
rk3288-veyron-pinky.dtb \
ARM: dts: rockchip: Add rk3288 vyasa board This patch adds initial support for rk3288 based Vyasa board, which is made by Amarula Solutions. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-26 17:09:24 +07:00
rk3288-veyron-speedy.dtb \
rk3288-vyasa.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_S3C24XX) += \
s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += \
s3c6410-mini6410.dtb \
ARM: dts: Add dts file for S3C6410-based SMDK6410 board This patch adds basic device tree sources for SAMSUNG SMDK6410 board based on SAMSUNG S3C6410 SoC. Currently only UARTs, SD channel 0 and 100Mbps ethernet (SMSC911x) are supported. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-26 00:38:41 +07:00
s3c6410-smdk6410.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_S5PV210) += \
s5pv210-aquila.dtb \
ARM: dts: Add Device tree for s5pc110/s5pv210 boards Add DTS for s5pc110 boards: goni, aquila, smdkc110 s5pv210: smdkv210, tiny210, torbreck Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [t.figa: Rebased, fixed merge conflicts, neatened.] Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-09-28 23:25:30 +07:00
s5pv210-goni.dtb \
s5pv210-smdkc110.dtb \
s5pv210-smdkv210.dtb \
s5pv210-torbreck.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
ARM: dts: socfpga: Add NAND device tree for Arria10 Add socfpga_arria10_socdk_nand.dts board file for supporting NAND. Signed-off-by: Graham Moore <grmoore@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- v2: move nand dts node to socfpga_arria10.dtsi
2015-07-07 21:58:36 +07:00
socfpga_arria10_socdk_nand.dtb \
ARM: dts: socfpga: Enable QSPI in Arria10 devkit Enable the QSPI node and add the flash chip. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-10-19 22:07:48 +07:00
socfpga_arria10_socdk_qspi.dtb \
ARM: socfpga: dts: rename socdk board file to socdk_sdmmc Rename the socfpga_arria10_socdk board file to socfpga_arria10_socdk_sdmmc as Arria 10 devkit cannot support SDMMC and QSPI at the same time. Thus we will need to have 2 separate board files, one for SDMMC and one for QSPI. We also add a new base board dtsi file, socfpga_arria10_socdk.dtsi so that we use common peripherals for each flavor of the devkits. Add the sdmmc node to the socfpga_arria10_socdk_sdmmc.dts board file. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-10 10:57:04 +07:00
socfpga_arria10_socdk_sdmmc.dtb \
ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard Add support for the DENX MCV SoM and MCVEVK baseboard. The SoM contains eMMC, DRAM, Altera Cyclone V SoC. The baseboard contains CAN ports, UART ports, STMPE811 touchscreen controller, USB OTG port, ethernet port and a lot of IO pins. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: Vince Bridgers <vbridgers2013@gmail.com> Cc: Alan Tull <atull@altera.com> Cc: Thor Thayer <tthayer@altera.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-11-19 23:15:05 +07:00
socfpga_cyclone5_mcvevk.dtb \
dts: socfpga: Add support for Altera's SOCFPGA Arria V board Add support for a new SOCFPGA board that has an Arria V FPGA along with dual ARM Cortex-A9 cores. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Cc: Pavel Machek <pavel@denx.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: devicetree@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org
2013-09-26 03:38:20 +07:00
socfpga_cyclone5_socdk.dtb \
ARM: dts: socfpga: Add support of Terasic DE0 Atlas board The Terasic DE0 Atlas board is also known as the DE0-Nano board. This patch adds the DTS board file for the DE0-Nano Sockit board, and not the DE0 Nano "Development Board". Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v3: Updated skew settings for the gmac1 node as this board is using the KSZ9031 PHY instead of the 9021 PHY. v2: use stdpath-out for console and remove comment regarding u-boot ethaddr
2015-07-09 06:48:49 +07:00
socfpga_cyclone5_de0_sockit.dtb \
ARM: socfpga: dts: Add support for terasic SoCkit This adds basic support for the terasic SoCkit board. The board includes an Altera Cyclone 5 SoC. [Dinh Nguyen] - Changed to 115200 for baudrate in dts bootargs Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2013-10-07 22:41:32 +07:00
socfpga_cyclone5_sockit.dtb \
ARM: socfpga: dts: add support for EBV SOCrates The SOCrates is a SOCFpga-Cyclone5 based board from EBV. Add support for it. Reviewed-by: Pavel Machek <pavel@denx.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-04-02 23:13:11 +07:00
socfpga_cyclone5_socrates.dtb \
ARM: dts: socfpga: Add Macnica sodia board Add support for board based on the Altera Cyclone V SoC. This board has the following functions: - 1 GiB of DRAM - 1 Gigabit ethernet - 1 SD card slot - 1 USB gadget port - QSPI NOR Flash - I2C EEPROMs and I2C RTC - DVI output - Audio port This commit supports without QSPI, DVI and Audio. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-09-25 06:59:45 +07:00
socfpga_cyclone5_sodia.dtb \
ARM: dts: socfpga: Add samtec VIN|ING board Add support for board based on the popular Altera Cyclone V SoC. This board has the following properties: - 1 GiB of DRAM - 1 Gigabit ethernet - 1 USB gadget port - 1 USB host port with an on-board hub - 2 QSPI NORs connected to the Cadence QSPI core - Multiple I2C EEPROMs and one I2C temperature sensor Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-04-13 19:24:58 +07:00
socfpga_cyclone5_vining_fpga.dtb \
arm: socfpga: Add entries to enable make dtbs socfpga Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Tested-by: Pavel Machek <pavel@denx.de> Reviewed-by: Pavel Machek <pavel@denx.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Pavel Machek <pavel@denx.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-12 06:30:31 +07:00
socfpga_vt.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_SPEAR13XX) += \
spear1310-evb.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
spear1340-evb.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_SPEAR3XX) += \
spear300-evb.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
spear310-evb.dtb \
ARM: SPEAr320: DT: Add SPEAr 320 HMI board support This adds support for SPEAr320-HMI board. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-08-09 06:20:11 +07:00
spear320-evb.dtb \
spear320-hmi.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_SPEAR6XX) += \
spear600-evb.dtb
dtb-$(CONFIG_ARCH_STI) += \
stih407-b2120.dtb \
ARM: STi: DT: STiH410: Add STiH410 SoC and b2120 board support. The STiH410 is an advanced multi-HD AVC processor with 3D graphics acceleration and 1.5-GHz ARM Cortex-A9 SMP CPU part of the stih407 family. It has wide connectivity including USB 3.0, PCI-e, SATA and gigabit ethernet. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-17 23:48:00 +07:00
stih410-b2120.dtb \
ARM: dts: STi: Introduce B2260 board B2260 board is the STMicroelectronics 96Board based on STiH410 soc : - 1GB DDR - On-Board USB combo WiFi/Bluetooth RTL8723BU with PCB soldered antenna - Ethernet 1000-BaseT - Sata - HDMI - 2 x USB2 type A - micro USB2 type AB - SD card slot - High speed connector (SD/I2C/USB interfaces) - Slow speed connector (UART/I2C/GPIO/SPI/PCM interfaces) Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
2016-08-15 19:17:00 +07:00
stih410-b2260.dtb \
ARM: dts: STiH418: Add B2199 board support B2199 HDK is the reference board for STiH418 SoC. It has the following characteristics: - 3GB DDR3 - 8GB eMMC / SD-Card slot - 32MB NOR Flash - 1 x Gbit Ethernet - 1 x USB3.0 port - 2 x USB2.0 ports - 1 x Sata or Mini-PCIe port - 1 x WiFi 802.11ac (Quantenna) - 1 x HDMI out - 1 x HDMI in - 1 x SPDIF Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-01-09 22:11:00 +07:00
stih418-b2199.dtb
ARM: dts: stm32: add initial support of stm32mp157c eval board Add support of stm32mp157c evaluation board (part number: STM32MP157C-EV1) split in 2 elements: -Daughter board (part number: STM32MP157C-ED1) which includes CPU, memory and power supply -Mother board (part number: STM32MP157C-EM1) which includes external peripherals (like display, camera,...) and extension connectors. The daughter board can run alone, this is why the device tree files are split in two layers, for the complete evaluation board (ev1) and for the daughter board alone (ed1). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-02-26 22:49:18 +07:00
dtb-$(CONFIG_ARCH_STM32) += \
ARM: dts: Add STM32429i-EVAL board support Main features of STM32429i-EVAL evaluation kit are: - STM32F429 Cortex-M4 MCU @180MHz * 2MB internal Flash * 256KB internal RAM - 32MB SDRAM - 16MB NOR Flash - 2MB SRAM - 4.3" TFT LCD with resistive touchscreen - SDCard connector (SDIO compatible) - 1x USB 2.0 OTG + 1x USB 1.1 OTG - Ethernet Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
2015-07-12 16:27:36 +07:00
stm32f429-disco.dtb \
ARM: stm32: Supply a DTS file for the STM32F469 Discovery board It's pretty similar to the STM32F429, but there are some subtle changes required to boot successfully. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
2016-02-16 21:16:00 +07:00
stm32f469-disco.dtb \
ARM: dts: stm32: add stm32f769I & stm32f746 discovery board support Stm32f769I & stm32f746 are MCUs of stm32f7 family. Here are the major specs of the two boards: stm32f769I discovery board: - Cortex-M7 core @216MHz - 2MB mcu internal flash - 512KB internal sram - 16MB sdram memory - 64MB qspi flash memory - 4 inch wvga LCD-TFT Display stm32f746 discovery board: - Cortex-M7 core @216MHz - 1MB mcu internal flash - 320KB internal sram - 8MB sdram memory - 16MB qspi flash memory - 4.3 inch 480x272 LCD-TFT display Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-06-07 18:55:25 +07:00
stm32f746-disco.dtb \
stm32f769-disco.dtb \
ARM: dts: Add STM32F746 MCU and STM32746g-EVAL board The STMicrolectornics's STM32F746 MCU has the following main features: - Cortex-M7 core running up to @216MHz - 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM) - FMC controller to connect SDRAM, NOR and NAND memories - Dual mode QSPI - SD/MMC/SDIO support - Ethernet controller - USB OTFG FS & HS controllers - I2C, SPI, CAN busses support - Several 16 & 32 bits general purpose timers - Serial Audio interface - LCD controller - HDMI-CEC - SPDIFRX Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-15 18:01:57 +07:00
stm32429i-eval.dtb \
ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board Add basic support for STM32H743 MCU and his eval board. The STMicrolectornics's STM32H743 MCU is based on Cortex-M7 core running up to @400MHz with 2MB internal flash and 1MB internal RAM. For more details see: Documentation/arm/stm32/stm32h743-overview.txt Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-01-31 16:44:25 +07:00
stm32746g-eval.dtb \
ARM: dts: stm32: Add stm32h743i-disco board Add basic support for stm32h743i-discovery board This board offers : _ 2MBytes Flash _ 1 x micro USB OTG port _ 1 x STLink connector (micro USB) _ 1 x micro SD card slot _ 1 x RJ45 connector _ 1 x RCA connector _ 2 x Audio jack connectors (in and out) _ 2 x speaker connectors (left and right) _ 1 x joystick _ 1 x DCMI connector (Digital camera interface) _ 1 x 4 inch DSI LCD (Display Serial Interface) _ Arduino Uno Connectors _ 2 x PIO connectors (PMOD and PMOD+) _ 1 x wakeup button _ 1 x reset button Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-06-07 14:16:00 +07:00
stm32h743i-eval.dtb \
ARM: dts: stm32: add initial support of stm32mp157c eval board Add support of stm32mp157c evaluation board (part number: STM32MP157C-EV1) split in 2 elements: -Daughter board (part number: STM32MP157C-ED1) which includes CPU, memory and power supply -Mother board (part number: STM32MP157C-EM1) which includes external peripherals (like display, camera,...) and extension connectors. The daughter board can run alone, this is why the device tree files are split in two layers, for the complete evaluation board (ev1) and for the daughter board alone (ed1). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-02-26 22:49:18 +07:00
stm32h743i-disco.dtb \
stm32mp157c-ed1.dtb \
stm32mp157c-ev1.dtb
ARM: sunxi: dt: build DTs according to new MACH_SUNxI Kconfig symbols Allwinner sunxi support has been split into the various SoCs in Kconfig. Adapt the new symbols for the device trees. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-17 20:11:20 +07:00
dtb-$(CONFIG_MACH_SUN4I) += \
ARM: sunxi: dt: Add device tree for Mele A1000 This adds a device tree usable on Mele A1000 (and A2000, as it apparently is the same device except for the case). This device features one UART port, Ethernet, an AXP209 PMU on i2c0 and two user configurable LEDs. Signed-off-by: Emilio López <emilio@elopez.com.ar> [maxime: fixed the soc node address] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-14 06:18:21 +07:00
sun4i-a10-a1000.dtb \
ARM: dts: sun4i: Add new ba10-tvbox board The ba10 tvbox is an A10 based android tvbox, with 512M RAM, 8G nand flash, rtl8188ctv usb wifi 1 USB-A receptacle hooked up to an EHCI/OHCI controller, 1 USB-A receptacle hooked up to the OTG and 100Mbit ethernet using a rtl8201 phy. The PCB is labelled ba10 hence I've named the board ba10-tvbox. It is used in noname allwinner A10 tv-boxes. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-01 04:57:57 +07:00
sun4i-a10-ba10-tvbox.dtb \
ARM: dts: sun4i: Add dts file for Chuwi V7 CW0825 tablet The Chuwi V7 is an A10 (sun4i) based tablet with 1G of RAM, 16G of nand flash, microsd slot, 7" 1024x768 lvds ips panel, mini hdmi out, headphones out, stereo speakers, front & back camera and usb wifi. It is clearly marked "CHUWI", "V7" and "Model: CW0825" on the back of the tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-18 19:08:20 +07:00
sun4i-a10-chuwi-v7-cw0825.dtb \
ARM: sunxi: Fix Mini X-plus device tree build Commit b00adbe0 ("ARM: sunxi: Rename uart nodes to serial") changed the node names in the DTSI, changes that were not accordingly made to the Mini X-Plus device tree. This breakage slipped through because it was not properly declared in the Makefile. Fix both issues. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-19 03:44:29 +07:00
sun4i-a10-cubieboard.dtb \
ARM: dts: sun4i: Add dts file for Dserve DSRV9703C tablet The Dserve DSRV9703C is a 9.7" A10 tablet with a 1024x768 ips LCD, 1G RAM, 4GB flash, a Focaltech FT5406EE8 touchscreen and rtl8188ctv wifi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-03-19 14:53:52 +07:00
sun4i-a10-dserve-dsrv9703c.dtb \
ARM: dts: sun4i: Add initial dts for Gemei G9 tablet Gemei G9 is an A10 based tablet, with 1G RAM, 16G NAND, 1024x768 IPS LCD display, stereo speakers, 1.3MP front camera and 5 MP rear camera, 8000mAh battery, GT901 2+1 touchscreen, Bosch BMA250 accelerometer and RTL8188CUS USB wifi. It also has MicroSD slot, miniHDMI, 1 x MicroUSB OTG port and 1 x MicroUSB host port and 3.5mm headphone jack. Changes since v2: * Fix syntax error (brown paper bag release) Changes since v1: * Added sun4i-lradc keymap * Added TODO note about missing IRQ pins for bma250 * Fixed formatting issues and removed external URLs Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-27 01:00:06 +07:00
sun4i-a10-gemei-g9.dtb \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
ARM: dts: sun4i: Add dts file for iNet-1 based tablets The iNet-tek iNet-1 PCB is a PCB found in various generic 10.1" 1024x600 A10 based tablets such as the Point of View Protab2 XXL and the Cherry M1007. This patch has been tested on both rev2 and rev5 of this board / these tablets. It comes with a rtl8188cus usb wifi connected to ehci1, focal ft5406ee8 touchscreen connected to i2c2 addr 0x38, bosch bma 250 accelerometer connected to i2c1 addr 0x18 and the usual connectors: headphone, mini hdmi, power-barrel, mini-usb and a micro-sd slot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-09 15:23:24 +07:00
sun4i-a10-inet1.dtb \
ARM: dts: sun4i: Add initial dts for Gemei G9 tablet Gemei G9 is an A10 based tablet, with 1G RAM, 16G NAND, 1024x768 IPS LCD display, stereo speakers, 1.3MP front camera and 5 MP rear camera, 8000mAh battery, GT901 2+1 touchscreen, Bosch BMA250 accelerometer and RTL8188CUS USB wifi. It also has MicroSD slot, miniHDMI, 1 x MicroUSB OTG port and 1 x MicroUSB host port and 3.5mm headphone jack. Changes since v2: * Fix syntax error (brown paper bag release) Changes since v1: * Added sun4i-lradc keymap * Added TODO note about missing IRQ pins for bma250 * Fixed formatting issues and removed external URLs Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-27 01:00:06 +07:00
sun4i-a10-inet97fv2.dtb \
ARM: dts: sun4i: Add dts file inet9f-rev03 based tablets The inet9f-rev03 pcb is specially designed for gaming tablets, such as the qware tb-g100 tablet. These 7" tablets feature a dpad, firebuttons and 2 joysticks on the sides of the screen. Besides this they have the usual connectors: power-barrel, mini usb, mini hdmi, headphone and micro-sd slot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-09 15:23:23 +07:00
sun4i-a10-inet9f-rev03.dtb \
ARM: dts: Fix Makefile target for sun4i-a10-itead-iteaduino-plus Commit 79ae3e66f8d (ARM: dts: sun4i: Add Iteaduino Plus A10) added a new make target for the sun4i-a10-itead-iteaduino-plus dts file, but mistakenly used .dts instead of the correct .dtb suffix. This resulted in a build error like: scripts/Makefile.dtbinst:42: target 'sun4i-a10-itead-iteaduino-plus.dts' doesn't match the target pattern when doing a make dtbs_install. Fix it to use the proper file name. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-04 19:49:34 +07:00
sun4i-a10-itead-iteaduino-plus.dtb \
ARM: dts: sun7i: Add dts file for the Jesurun Q5 top set box The Jesurun Q5 has a black plastic casing with the approximate dimensions of 100mm x 100mm x 24mm with rounded edges. In terms of hardware it features an Allwinner A10 SoC with 1GB RAM and 8GB of NAND flash. The external connectors are: 2x USB-A female supporting USB2.0, 3.5mm female jack for audio, HDMI female, SPDIF, RJ45 LAN and Power. In addition the device has 1x red LED (hard wired to power) and an programmable green led. On the board there is also an unpopulated IR receiver and the UART. The devices is equipped with an AXP209 PMU. For more details see: http://linux-sunxi.org/Jesurun_Q5 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-23 19:26:50 +07:00
sun4i-a10-jesurun-q5.dtb \
ARM: dts: sun4i: Add Marsboard A10 board This patch add support for Marsboard A10 board. The Marsboard A10 is a A10 based development board with 1G RAM, 1G NAND, micro SD card slot, SATA 2.0 socket, 10/100 ethernet, mini HDMI port, 1 USB OTG port and 2 USB 2.0 ports. Board does not use the AXP209 pmic, it does not have a pmic at all. Board also have 2 expansion 70 pin headers. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21 01:03:28 +07:00
sun4i-a10-marsboard.dtb \
ARM: sunxi: Fix Mini X-plus device tree build Commit b00adbe0 ("ARM: sunxi: Rename uart nodes to serial") changed the node names in the DTSI, changes that were not accordingly made to the Mini X-Plus device tree. This breakage slipped through because it was not properly declared in the Makefile. Fix both issues. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-19 03:44:29 +07:00
sun4i-a10-mini-xplus.dtb \
ARM: dts: sun4i: Add mk802 board The mk802 is the "classic" Allwinner A10 based hdmi tv-stick, it features 512M or 1G RAM, 4G nand, a mini-hdmi female connector, USB-A receptacle, mini-usb receptacle (OTG) and USB-wifi. Somewhat unique the mk802 does not use the AXP209 pmic, it does not have a pmic at all. For more details see: http://linux-sunxi.org/Rikomagic_mk802 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-18 19:09:43 +07:00
sun4i-a10-mk802.dtb \
ARM: dts: sun4i: Add mk802ii board The mk802ii is a revised version of the mk802 A10 based hdmi tv-stick, it features 1G RAM, 4G nand, a hdmi male connector, USB-A receptacle, 2 micro usb receptacles (OTG & power) and USB-wifi, and does come with an axp209 pmic. For more details see: http://linux-sunxi.org/Rikomagic_mk802ii Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-18 19:09:44 +07:00
sun4i-a10-mk802ii.dtb \
ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board This add support for the A10-OLinuXino-LIME: https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME A low cost Allwinner A10 based dev-board, with sata, ethernet, hdmi and 2x USB. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-02 02:26:37 +07:00
sun4i-a10-olinuxino-lime.dtb \
ARM: sun4i: dt: Add new LinkSprite pcDuino2 board The LinkSprite pcDuino2 board is almost identical to the older LinkSprite pcDuino1 board according to the schematic pdf files. So we just include the existing "sun4i-a10-pcduino.dts" file and make the necessary adjustments. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-09 18:09:38 +07:00
sun4i-a10-pcduino.dtb \
ARM: dts: sun4i: Add dts file for the pov protab2-ips9 tablet The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 lcd screen, microsd slot, headphones, mini hdmi, mini usb b and power barrel connectors. It uses a rtl8188cus usb wifi chip and a RDA 5875Y bluetooth chip attached to uart2. It has a bma250 accelerometer attached to i2c1 addr 0x18, this only works when ldo3 is set to 2.8 volt, otherwise i2c1 gets stuck, so for now we mark i2c1 as failed. It has a pixcir,pixcir_tangoc compatible touchscreen attached to i2c2 addr 0x5c. This is not enabled in this dts, because this variant of the pixcir_tangoc has separate wakeup and enable pins both of which need to be driven low before the touchscreen will work. Before we can enable this the pixcir driver and devicetree-bindings need to be extended to support these pins. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-21 05:04:29 +07:00
sun4i-a10-pcduino2.dtb \
sun4i-a10-pov-protab2-ips9.dtb
ARM: sunxi: dt: build DTs according to new MACH_SUNxI Kconfig symbols Allwinner sunxi support has been split into the various SoCs in Kconfig. Adapt the new symbols for the device trees. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-17 20:11:20 +07:00
dtb-$(CONFIG_MACH_SUN5I) += \
ARM: dts: sun5i: Add support for the Auxtek-T003 HDMI stick The Auxtek-T003 HDMI stick is an A10s based HDMI stick with USB wifi, and composite video out support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-08-07 22:22:33 +07:00
sun5i-a10s-auxtek-t003.dtb \
ARM: dts: sun5i: Add new Auxtek-t004 board The auxtek-t004: http://www.fasttech.com/products/1110/10004200/1318603-auxtek-t004-allwinner-a10s-single-core-android-ics Is an Allwinner A10s based hdmi tv stick with with 512M RAM, 4G nand flash, toc9002 (bcm43362) sdio wifi, 1 USB host ports using an USB-A receptacle and a 2 micro-usb receptacles, one for power and one for USB OTG. The sdio wifi appears to not have an oob irq hooked up, so we rely on sdio-irq support for it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-03-08 02:01:21 +07:00
sun5i-a10s-auxtek-t004.dtb \
ARM: dts: sun5i: Add mk802_a10s board The mk802_a10s re-uses is the "classic" mk802 case and functionality, but has an A10s SoC inside rather then the A10, it features 512M or 1G RAM, 4G nand, a mini-hdmi female connector, USB-A receptacle, mini-usb receptacle (OTG) and a sdio realtek wifi chip. Unlike the original mk802 it does have a pmic, the axp152. For more details see: http://linux-sunxi.org/Semitime_g2 Signed-off-by: Hans de Goede <hdegoede@redhat.com> [Maxime: Changed the compatible and node names labels] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-18 19:09:45 +07:00
sun5i-a10s-mk802.dtb \
ARM: sunxi: Add Olimex A10s-Olinuxino-micro device tree Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Acked-by: Emilio López <emilio@elopez.com.ar>
2013-06-09 15:41:22 +07:00
sun5i-a10s-olinuxino-micro.dtb \
ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board The R7 tv-dongle is an A10s based hdmi tv dongle, with 1G RAM, 4G nand flash, and rtl8189es sdio wifi. It has a standard male hdmi connector, an USB host port using an USB-A receptacle and a micro-usb receptacle for both power and USB OTG. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-12 19:11:06 +07:00
sun5i-a10s-r7-tv-dongle.dtb \
ARM: dts: sun5i: Add dts file for the Wobo i5 top set box The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller. This commit adds a dts file adding support for this top set box. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-10 20:05:59 +07:00
sun5i-a10s-wobo-i5.dtb \
ARM: dts: sun5i: Add dts for Difrence DIT4350 tablet The Difrnce dit4350 tablet is a tiny tablet with a 4.3" 16:9 480x272 LCD, A13 SoC, 512M RAM, 4G NAND, solomon systech ssd2532qn6 touchscreen at i2c1 address 0x48, Memsic MXC622X accelerometer at i2c1 address 0x15 and rtl8188etv wifi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-03-11 04:38:04 +07:00
sun5i-a13-difrnce-dit4350.dtb \
ARM: dts: sun5i: Add dts file for the Empire Electronix D709 tablet The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet, featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack. Empire Electronix is written on the back of the tablet, the D709 model info can be found in the about tablet menu in android. The PCB has no markings to speak of. This dts file does not add support for the ft5x touchscreen found at i2c bus 1, addr 0x38, irq PG11, because it does not work out of the box. It seems it has been flashed with the wrong firmware and needs to have alternative firmware uploaded at boot to make the touchscreen work properly, when hot-booting from android into an upstream kernel the touchscreen does work. The Memsic MXC622X accelerometer at i2c bus 1, addr 0x15 also is not enabled as there is no driver for it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-20 18:43:01 +07:00
sun5i-a13-empire-electronix-d709.dtb \
ARM: dts: sun5i: Add dts file for the Empire Electronix M712 tablet Add a dts file for the Empire Electronix M712 tablet, this is a 7" A13 tablet, with micro-usb (otg), headphone and micro-sd slots on the outside. It uses a Goodix gt811 touchscreen controller, a RTL8188CTV wifi chip and a DMART06 (1238a4) accelerometer. Note currently the dts for this is somewhat empty. This will change once we add support for the touchscreen and accelerometer. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-26 21:42:25 +07:00
sun5i-a13-empire-electronix-m712.dtb \
ARM: dts: sun5i: Add DT for HSG H702 tablet board This is a Q8 format 7 inch tablet with an Allwinner A13 SoC. It has 512MB DRAM, 4GB NAND flash, an accelerometer, camera, RTL8188-based WiFi, and micro SD slot for external storage. It is likely made by a subsidiary of Hanns.G (Hannstar). Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-09-16 23:04:46 +07:00
sun5i-a13-hsg-h702.dtb \
ARM: dts: sun5i: Add dts file for inet98v_rev2 based tablets The inet98v_rev2 is a pcb used in generic A13 based tablets. It features volume buttons, a power barrel, micro-usb otg, headphone connector and a power button. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-08-28 20:15:17 +07:00
sun5i-a13-inet-98v-rev2.dtb \
ARM: dts: sun5i: add support for Lichee Pi One board Lichee Pi One is a low-cost Allwinner A13-based development board, with an AXP209 PMU, a USB2.0 OTG port, a USB2.0 host port (or an onboard RTL8723BU Wi-Fi card), optional headers for LCD and CSI, two GPIO headers and two MicroSD card slots (connected to mmc0 and mmc2, both bootable). Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-12-22 03:02:35 +07:00
sun5i-a13-licheepi-one.dtb \
ARM: sun6i: Add WITS Colombus A31 evaluation kit support This platform from WITS is the evaluation board for the Allwinner A31. It features a quad-Cortex A7, 2048MB of RAM, NAND, USB, MMC, several UART, HDMI, a 2048 x 1536 10" screen, powered by a PowerVR, etc. Of course, most of these peripherals aren't supported yet, but support for those will come eventually. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-06-23 01:22:14 +07:00
sun5i-a13-olinuxino.dtb \
ARM: dts: sun5i: Add new Utoo P66 board The UTOO P66 is a 6" A13 tablet / lcd ereader. It features a 6" 480x800 ips lcd screen, 512MB RAM & 4GB emmc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-03-08 02:01:22 +07:00
sun5i-a13-olinuxino-micro.dtb \
ARM: dts: sun5i: Add dts file for q8 formfactor a13 based tablets This commits adds a generic dts file for q8 formfactor a13 based tablets. The tablets ship in many variants, with the difference mainly being the touchscreen controller / accelerometer / wifi chip used. The wifi is USB based, and thus not listed in devicetree. The touchscreen controller / accelerometer may turn out to be a problem once we add support for those. We can either do something with devicetree overlays, or add sun5i-a13-<touchscreen>-<accelerometer>.dts files. The latter is what the android mod community is doing with firmware images. This dts was tested with an a13 q8 tablet with a pcb labelled: "94V-0", silead gsl1680 touchscreen controller and a mc32x0 accelerometer. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-05 21:55:53 +07:00
sun5i-a13-q8-tablet.dtb \
ARM: sun5i: Add C.H.I.P DTS The C.H.I.P. is a small SBC with an Allwinner R8, 8GB of NAND, 512MB of RAM, USB host and OTG, a wifi / bluetooth combo chip, an audio/video jack and two connectors to plug additional boards on top of it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2015-06-10 00:38:43 +07:00
sun5i-a13-utoo-p66.dtb \
ARM: gr8: Add CHIP Pro support The CHIP Pro is a small embeddable board. It features a GR8, an AXP209 PMIC, a 512MB SLC NAND and a WiFi/BT chip. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-01 23:27:21 +07:00
sun5i-gr8-chip-pro.dtb \
ARM: gr8: Rename the DTSI and relevant DTS Reviews have found that sun5i was a better prefix after all for the GR8. Rename the relevant device trees before it's too late. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-22 21:06:04 +07:00
sun5i-gr8-evb.dtb \
ARM: sun5i: Add C.H.I.P DTS The C.H.I.P. is a small SBC with an Allwinner R8, 8GB of NAND, 512MB of RAM, USB host and OTG, a wifi / bluetooth combo chip, an audio/video jack and two connectors to plug additional boards on top of it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2015-06-10 00:38:43 +07:00
sun5i-r8-chip.dtb
ARM: sunxi: dt: build DTs according to new MACH_SUNxI Kconfig symbols Allwinner sunxi support has been split into the various SoCs in Kconfig. Adapt the new symbols for the device trees. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-17 20:11:20 +07:00
dtb-$(CONFIG_MACH_SUN6I) += \
ARM: sunxi: dt: add APP4-EVB1 board support The APP4 EVB1 development boards embeds an A31, together with some NAND, one SD card slot, and one SDIO + UART WiFi and Bluetooth chip, a few I2C buses, USB, and a LCD display. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2014-05-13 22:44:22 +07:00
sun6i-a31-app4-evb1.dtb \
ARM: sun7i: Add Olimex A20-Olinuxino-Micro support The Olimex A20-Olinuxino is an open-hardware board based on the Allwinner A20 SoC, with most of the pins exported on headers, a 10/100M ethernet port, SATA, SD and uSD slots, etc. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-07-17 15:12:16 +07:00
sun6i-a31-colombus.dtb \
ARM: dts: sun6i: Add Merrii A31 Hummingbird support This adds support for the A31 Hummingbird: http://www.merrii.com/en/pla_d.asp?id=172 The Merrii A31 Hummingbird is a development board based on the Allwinner A31 SoC with multiple USB ports through a USB hub chip, a uSD slot, a 10/100/1000M ethernet port, an AP6210 WiFi/BT chip, TV-in, HDMI, VGA, audio in/out ports, and LCD/CSI headers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: enable usbphy, ehci0, ohci0 for on-board usb hub; add pcf8563 rtc node; add comments for i2c0 and mmc0 pull-ups; correct ethernet phy address to 0x01; drop uart2 (BT chip has no power) and uart3 (no device); use proper commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2014-07-16 00:15:47 +07:00
sun6i-a31-hummingbird.dtb \
ARM: sun6i: dt: Add new Mele I7 device The Mele I7 is a Allwinner A31 based Android TV box, with 1G RAM, 8GB NAND flash, a RTL8188etv wifi chip, 3 USB Host ports using USB-A receptacles, a micro USB-B receptacle for USB OTG, HDMI out, a TRS connector for A/V, SPDIF and IrDA. This patch adds basic support for the device, more information can be found here (http://linux-sunxi.org/Mele_I7). Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-02-28 20:48:05 +07:00
sun6i-a31-i7.dtb \
ARM: dts: sun6i: Add dts file for CSQ CS908 board The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND, rtl8188etv usb wifi, 2 USB A receptacles (1 connected through the OTG controller), ethernet, 3.5 mm jack with a/v out and hdmi out. Note it has no sdcard slot and therefore can only be fel booted. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-12-29 18:09:26 +07:00
sun6i-a31-m9.dtb \
ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using the same dts for both models. Unfortunately this does not work for the otg controller, on the M9 this is routed to a micro-usb connector on the outside, while as on the A1000G-quad it is connected to an usb to sata bridge (which is not populated on the M9 pcb). This commit adds a new dts for the Mele-A1000G-quad to allow using different otg controller settings on the 2 boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-01 22:02:59 +07:00
sun6i-a31-mele-a1000g-quad.dtb \
ARM: dts: sun6i: Add dts for colorfly e708 q1 tablet The colorfly e708 q1 is a 7" tablet which is clearly marked as colorfly e708 q1 on the back. It features a 9:16 800x1280 IPS LCD, A31s SoC, 1GB RAM, 8G NAND, ilitek 2139qt004 touchscreen on i2c-1 addr 0x41, stk8313 accelerometer on i2c-2 addr 0x22 and a rtl8188etv wifi chip. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-03-10 04:50:30 +07:00
sun6i-a31s-colorfly-e708-q1.dtb \
ARM: dts: sun6i: Add support for Yones Toptech bs1078v2 tablets The bs1078v2 is a pcb found in 10.1" tablets with an A31 soc, 1G RAM and 8G NAND, rtl8723as usb wifi, 1 micro USB OTG port, 1 USB HOST port This commit adds a dts for v2 of the bs1078 pcb. Signed-off-by: Lawrence Yu <lyu@micile.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-22 22:50:50 +07:00
sun6i-a31s-cs908.dtb \
ARM: dts: sun6i: Add new dts file for tablets using the inet-q972 PCB Add a dts file for tablets using the generic inet-q972 PCB. Tablets with this PCB feature a mini-hdmi output, micro-usb usb-host, micro-usb usb-otg, 3.5mm headphone jack, a micro sd slot, (mini) power-barrel and an usb wifi module. This has been tested on a 9.7" 1024x768 qware qw tb9718-qhd tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-19 01:02:17 +07:00
sun6i-a31s-inet-q972.dtb \
ARM: dts: sun6i: Add dts file for MSI Primo81 tablet The MSI Primo81 is an A31s based tablet, with 1G RAM, 16G NAND, 768x1024 IPS LCD display, mono speaker, 0.3 MP front camera, 2.0 MP rear camera, 3500 mAh battery, gt911 touchscreen, mma8452 accelerometer and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons (both volume buttons are also connected to the UBOOT_SEL pin). The external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB OTG and 3.5mm headphone jack. USB OTG is enabled in host only mode. AXP221 USB power supply and GPIO support are required for full USB OTG support. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-23 10:50:41 +07:00
sun6i-a31s-primo81.dtb \
ARM: dts: sun6i: Add support for Sinlinx A31s SDK board The Sinlinx A31s SDK is a A31s based module/baseboard development kit. The core module has the SoC, PMIC, DRAM, eMMC and supporting components. There are also pads for UART0, JTAG and I2S. The baseboard has 100 Mbps Ethernet, 5x USB 2.0 host ports via a USB 2.0 hub chip, MMC, HDMI, SPDIF, CIR, audio jacks, 2 tablet-like volume buttons, RS232 style UART and USB OTG (though VBUS is not connected). Various headers are available for other addon modules, such as SDIO WiFi, LCD display, camera sensor, UARTs, I2C, SPI and GPIOs. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-17 23:04:09 +07:00
sun6i-a31s-sina31s.dtb \
ARM: dts: sun6i: Add a dts file for the Sinovoip BPI-M2 board The Sinovoip BPI-M2 is a SBC board based on the A31s SoC it features 1G RAM, a microsd slot, Gbit ethernet, 4 usb-a USB-2 ports, ir receiver, stereo headphone jack and hdmi video output. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-15 21:28:47 +07:00
sun6i-a31s-sinovoip-bpi-m2.dtb \
ARM: dts: sun6i: Add support for Yones Toptech bs1078v2 tablets The bs1078v2 is a pcb found in 10.1" tablets with an A31 soc, 1G RAM and 8G NAND, rtl8723as usb wifi, 1 micro USB OTG port, 1 USB HOST port This commit adds a dts for v2 of the bs1078 pcb. Signed-off-by: Lawrence Yu <lyu@micile.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-22 22:50:50 +07:00
sun6i-a31s-yones-toptech-bs1078-v2.dtb
ARM: sunxi: dt: build DTs according to new MACH_SUNxI Kconfig symbols Allwinner sunxi support has been split into the various SoCs in Kconfig. Adapt the new symbols for the device trees. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-17 20:11:20 +07:00
dtb-$(CONFIG_MACH_SUN7I) += \
ARM: dts: sun7i: Add Banana Pi board The Banana Pi is an A20 based development board using Raspberry Pi compatible IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi and stereo audio out + various expenansion headers: http://www.lemaker.org/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-10-01 14:26:06 +07:00
sun7i-a20-bananapi.dtb \
ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board Add support for the Bananapi M1 Plus A20 development board from sinovoip.com.cn . This board is nearly a clone of the Lemaker's Bananapro, but differ with the wlan chipset connection and i2s pinout. And I also enable the integrated audio codec on default. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-06-17 16:56:02 +07:00
sun7i-a20-bananapi-m1-plus.dtb \
ARM: dts: sun7i: Add dts file for Bananapro board Add support for the new Bananapro A20 development board from lemaker.org. This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver, 3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-18 19:08:19 +07:00
sun7i-a20-bananapro.dtb \
ARM: sun7i: Add Cubieboard2 Device Tree The Cubieboard2 is the successor of the first Cubieboard, and shares the same hardware, except that the Allwinner A10 found initially has been replaced by an Allwinner A20. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-07-25 17:19:16 +07:00
sun7i-a20-cubieboard2.dtb \
ARM: sunxi: dts: Add support for the cubieboard3, the CubieTruck Cubietech introduced a new cubieboard, the CubieTruck. This board added more output connectors and features 2 GiB of RAM and a Gigabit PHY. Tested are are uart0 and LEDS which both work as expected. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-10-08 15:22:32 +07:00
sun7i-a20-cubietruck.dtb \
ARM: dts: sun7i: Add Merrii A20 Hummingbird board This adds support for the A20 Hummingbird: http://www.merrii.com/en/pla_d.asp?id=171 This patch enable most on-board peripherals supported on current kernel, such as uart, i2c, spi, pwm, ohci/ehci, gmac and mmc. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Wills Wang <wills.wang.open@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-19 14:33:01 +07:00
sun7i-a20-hummingbird.dtb \
ARM: dts: sun7i: Add Itead Ibox support The Itead Ibox is a multi board device based on the Allwinner A20 SoC. It contains the A20 Itead Core module and a base board for the external interfaces. The core module comes with 4GB NAND and 1GB DDR RAM. The base board to which the core board is connected provides 3 USB 2.0 Host ports, 1 USB 2.0 OTG, 1 uSD slot, 10/100 Ethernet port, HDMI, IR receiver, SPDIF and a 32-pin GPIO header. This header expands the features of core board by exposing the VGA pins, audio In/Out pins, SATA, SPI, I2C, UARTS, USB-OTG and power. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-23 22:18:18 +07:00
sun7i-a20-itead-ibox.dtb \
ARM: dts: sun7i: Add new i12-tvbox board The i12 tvbox is an A20 based android tvbox, with 512M / 1G RAM, 4G nand flash, ap6210 or ap6330 sdio wifi + bt (broadcom sdio wifi + uart attached brcm bt), 2USB host ports using USB-A receptacles and a micro-usb receptacle for USB OTG, and 100Mbit ethernet using an IP101a phy. The PCB is labelled i12-a20 hence I've named the board i12-a20. It is used in noname allwinner A20 tv-boxes, which are sometimes sold with Q5 or QT840A as product name. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-22 00:43:31 +07:00
sun7i-a20-i12-tvbox.dtb \
arm: sun7i: Add sun7i-a20-icnova-swac.dts This baseboard from SWAC is equipped with the ICnova-A20 SoM from Incircuit. This board is equipped with the following interfaces / devices: - 512 MiB SDRAM - 4 GiB MLC NAND (Micron MT29F32G08CBACAWP or Hynix H27UBG8T2BTR) - USB host - LCD 800x480 - HDMI - CAN Note that the NAND support is still missing. As its currently not supported in mainline for sunxi and especially for these MLC devices. The original plan was to also provide a dtsi for the ICnova SoM, to put all the SoM internal nodes / properties there. But as I don't have a clear overview of the SoM specific and baseboard specific differences, I'm putting all in one dts for now. Once somebody pushed support for some other baseboard using the A20 SoM from Incircuit (e.g. the ADB4006 reference design), this should be separated. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marcus Heuer <marcus.heuer@swac.de> [maxime: Fixed CPU regulator upper voltage boundary] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-23 17:56:12 +07:00
sun7i-a20-icnova-swac.dtb \
ARM: dts: sun7i: Add dts file for the lamobo-r1 board The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet ports, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n. Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-24 05:12:43 +07:00
sun7i-a20-lamobo-r1.dtb \
ARM: dts: sun7i: Add Mele M3 board The Mele M3 is yet another Allwinnner based Android top set box from Mele. It uses a housing similar to the A2000, but without the USM sata storage slot at the top. It features an A20 SoC, 1G RAM, 4G eMMC (unique for Allwinner devices), 100Mbit ethernet, HDMI out, 3 USB A receptacles, VGA, and A/V OUT connections. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-10-01 21:25:37 +07:00
sun7i-a20-m3.dtb \
ARM: sun7i: dt: Add new MK808C device The MK808C is an A20 based android stick, with 1G RAM, 8G NAND flash, a RTL8723au wifi + bt combo chip, a USB host ports using USB-A receptacles, a mini USB-B receptacle for USB OTG, mini HDMI and a TRS connector for AV. This patch adds basic support for the device, more information can be found here (http://linux-sunxi.org/MK808C). Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-29 01:01:06 +07:00
sun7i-a20-mk808c.dtb \
ARM: sun7i: dt: Add new Olimex A20 EVB device The A20-SOM-EVB is a reference design of a 2-layer board for the A20-SOM. It expands the features of A20-SOM by adding VGA connector, HDMI connector, audio In/Out, LCD connector, 2 Mpix camera, gigabit Ethernet, SATA, USB-OTG and 2 USB hosts. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-01 00:34:39 +07:00
sun7i-a20-olimex-som-evb.dtb \
ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board With the new rev.E of A20-SOM-EVB, there is option for 16GB eMMC. Currently used card is KLMAG2GEND, wired to MMC2 slot. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-05-16 18:38:08 +07:00
sun7i-a20-olimex-som-evb-emmc.dtb \
ARM: dts: sunxi: Add Olimex A20-SOM204-EVB board This is new System-On-Module platform with universal dimm socket for easy insertation. The EVB board is designed to be universal with future modules. Product page is located here [1]. There are two dts files - one for base model and another for eMMC variant. Base features of A20-SOM204 board includes: * 1GB DDR3 RAM * AXP209 PMU * KSZ9031 Gigabit PHY * AT24C16 EEPROM * Status LED * LCD connector * GPIO connector There will be variants with the following options: * Second LAN8710A Megabit PHY * 16MB SPI Flash memory * eMMC card * ATECC508 crypto device The EVB board has: * Debug UART * MicroSD card connector * USB-OTG connector * Two USB host * RTL8723BS WiFi/BT combo * IrDA transceiver/receiver * HDMI connector * VGA connector * Megabit ethernet transceiver * Gigabit ethernet transceiver * SATA connector * CAN driver * CSI camera * MIC and HP connectors * PCIe x4 connector * USB3 connector * Two UEXT connectors * Two user LEDs Some of the features are multiplexed and cannot be used the same time: CAN and Megabit PHY. Others are not usable with A20 SoC: PCIe and USB3. [1] https://www.olimex.com/Products/SOM204/ Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-01-29 20:56:39 +07:00
sun7i-a20-olimex-som204-evb.dtb \
ARM: dts: sunxi: Add Olimex A20-SOM204-EVB-eMMC board A20-SOM204 board has option with onboard 16GB eMMC. The chip is wired to MMC2 slot. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-01-29 20:56:40 +07:00
sun7i-a20-olimex-som204-evb-emmc.dtb \
ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME This patch adds support for Olimex A20-OLinuXino-LIME board. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-20 12:25:03 +07:00
sun7i-a20-olinuxino-lime.dtb \
ARM: sun7i: add support for A20-OLinuXino-Lime2 This adds support for the Olimex A20-OLinuXino-Lime2 https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2 Differences to previous Lime boards are 1GB RAM and gigabit ethernet Signed-off-by: Iain Paton <ipaton0@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-10-10 20:15:24 +07:00
sun7i-a20-olinuxino-lime2.dtb \
ARM: dts: sunxi: Add OLinuXino Lime2 eMMC to the Makefile commit 27dd9af6bc000ab21fd ("ARM: dts: sunxi: Add a olinuxino-lime2-emmc") added the new emmc equipped lime2 but forgot its Makefile. This patch adds an entry to the Makefile. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-05-14 02:57:16 +07:00
sun7i-a20-olinuxino-lime2-emmc.dtb \
ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3 The LinkSprite pcDuino V3 is an A20 based development board featuring arduino compatible io headers, 1G RAM, 4G nand, sata, rtl8188cus usb wifi and 100 Mbit ethernet using an ip101a phy: http://www.pcduino.com/pcduino-v3/ Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> [hdegoede@redhat.com: Various cleanups, correct led pins] [hdegoede@redhat.com: Add axp209, ir and gpio-keys nodes] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-01 04:57:56 +07:00
sun7i-a20-olinuxino-micro.dtb \
ARM: dts: sun7i: Add dts file for A20-OLinuXino-MICRO-eMMC A20-OLinuXino-MICRO has option with onboard eMMC chip. For now it's only shipped with 4BG chip, but in the future this may change. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-28 13:32:43 +07:00
sun7i-a20-olinuxino-micro-emmc.dtb \
ARM: dts: sun7i: Add dts file for the Orangepi SBC The Orangepi is a development board using the Allwinner A20 SoC, with 1G RAM, microsd slot, HDMI, 1Gbit ethernet, USB wifi, Micro USB (otg), sata, 4 USB A ports, ir receiver and a headphones jack. Also see: http://linux-sunxi.org/Xunlong_Orange_Pi http://www.orangepi.org/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> [maxime: Added /chosen/stdout-path] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-04 15:59:53 +07:00
sun7i-a20-orangepi.dtb \
ARM: dts: sun7i: Add dts file for the Orangepi mini SBC The Orangepi mini is a development board using the Allwinner A20 SoC, with 1G RAM, 2 microsd slots (use the top side one for booting), HDMI, 1Gbit ethernet, USB wifi, Micro USB (otg), sata, 4 USB A ports, ir receiver and a headphones jack. Also see: http://linux-sunxi.org/Xunlong_Orange_Pi_Mini http://www.orangepi.org/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> [maxime: Added /chosen/stdout-path] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-04 15:59:54 +07:00
sun7i-a20-orangepi-mini.dtb \
ARM: dts: sun7i: Add dts file for pcDuino 3 Nano board Add support for the LinkSprite pcDuino 3 Nano board. This is a low-cost Allwinner A20 board with Arduino-style GPIO headers; it features 1G RAM, 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro USB socket for OTG and another for power in, HDMI, SATA, 5V power for SATA devices, gigabit Ethernet, an IR receiver, 3.5mm audio out and a MIPI camera connector. For more details, see: http://linux-sunxi.org/LinkSprite_pcDuino3_Nano Changes in v3: - rename LEDs to pcduino3-nano:green:usr[12] - remove optional features on Arduino headers (i2c2, spi0, uart2) Signed-off-by: Adam Sampson <ats@offog.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 01:27:45 +07:00
sun7i-a20-pcduino3.dtb \
ARM: dts: sun7i: Add dts file for Wexler TAB7200 This patch add support for Wexler TAB7200 tablet. The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480), capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot, mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-03-08 18:57:33 +07:00
sun7i-a20-pcduino3-nano.dtb \
ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT The Wits Pro A20 DKT is an A20 Development KiT with 1G RAM, 4G NAND, sdio wifi, 1Gbit ethernet, 1024x768 lcd screen with ft5x_ts touchscreen and a ton of IO connectors. Note there seem to be multiple sdcard slots on the board (4 in total), but other then mmc0 none of these are hooked up by default, there is a ton of dip-switches which likely allow hooking some of these up, but the documentation of the board only describes the use of a fraction of them, so for now we only support mmc0. Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> [hdegoede@redhat.com: Use pwrseq instead of a regulator for the wifi-en pin] [hdegoede@redhat.com: Add support for OOB irq for the sdio wifi] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-22 20:36:05 +07:00
sun7i-a20-wexler-tab7200.dtb \
sun7i-a20-wits-pro-a20-dkt.dtb
ARM: sun8i: dt: Add Ippo-q8h v5 support The Ippo-q8h is a tablet circuit board commonly found in cheap Android tablets with A23 SoCs. There are at least 2 versions of the board, with different peripherals, such as WiFi chips. Common features among these tablets include 512 MB DRAM, NAND, MMC, LCD, capacitive touchscreen, accelerometer, 1 or 2 camera sensors, USB OTG, microphone and speaker. v5 of these board designs has a ESP8089 WiFi chip (not supported) connected to mmc1. This patch adds very basic support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-06-20 21:52:53 +07:00
dtb-$(CONFIG_MACH_SUN8I) += \
ARM: sun8i: Introduce A23 Evaluation Board Support The A23 Evaluation Board has an MMC slot, two UARTs, NAND, a few display connectors (RGB, MIPI, LVDS), a mini-PCIE slot, USB host and OTG and a bunch of embedded sensors. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-05-08 03:46:53 +07:00
sun8i-a23-evb.dtb \
ARM: dts: sun8i: Add support for qt90h-v4 tablets The gt90h is a pcb found in generic 9" tablets with an A23 soc, 1G RAM and 8G nand, rtl8723as usb wifi, 1 micro usb port and 1 micro sd slot. This commit adds a dts for v4 of the gt90h pcb. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-08-14 21:44:37 +07:00
sun8i-a23-gt90h-v4.dtb \
ARM: dts: sun8i: Add dts file for inet86dz board The inet86dz board is a board used in 7" tablets from various oems. These tablets are a23 based 7" tablets featuring a 1024x600 LCD, 512MB RAM, 4G NAND, rtl8188etv usb wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-08 23:05:56 +07:00
sun8i-a23-inet86dz.dtb \
ARM: dts: sun8i: Add dts file for Ippo Q8H v1.2 tablets The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate dtb file since some gpio-s surrounding the wlan/bluetooth are different, it uses different camera sensors, and different DRAM timings. Note that atm neither the wlan/bluetooth nor the camera are supported, so atm their is no difference between the dts files, but because of the different DRAM timings there are already separate u-boot configs for the 2 different versions, and the 1.2 config refers to sun8i-a23-ippo-q8h-v1.2.dtb to be future proof, so we need to provide a sun8i-a23-ippo-q8h-v1.2.dtb file. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-13 17:44:32 +07:00
sun8i-a23-ippo-q8h-v5.dtb \
ARM: dts: sun8i: Add ET-Q8 A33 support ET-Q8_A33 is A33 based cheap tablet in common Q8 format. It has 512MB RAM, 4GB Nand, 7" Display, RDA5900P wifi, GSL1680 touch, etc. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Chen-Yu Tsai <wens@csie.org>
2015-05-30 21:55:05 +07:00
sun8i-a23-ippo-q8h-v1.2.dtb \
ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet The Polaroid MID2407PXE03 is an a23 based 7" tablet based on a M86_MB V2.0 PCB, featuring a 800x480 LCD, 512MB RAM, 4G NAND, esp8089 wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-08 23:05:55 +07:00
sun8i-a23-polaroid-mid2407pxe03.dtb \
ARM: dts: sun8i: Add dts file for the Polaroid MID2809PXE4 tablet The Polaroid MID2809PXE4 is a 9" tablet which is clearly marked Polaroid MID2809PXE4 on the back. It features a 9" 16:9 800x480 LCD, A23 Soc, 1GB RAM, 8GB NAND, gsl3670 touchscreen and esp8089 wifi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-03-14 23:32:25 +07:00
sun8i-a23-polaroid-mid2809pxe04.dtb \
ARM: dts: sun8i: Add sun8i-a23-q8-tablet.dts file This is a generic dts file for A23 based q8 formfactor tablets, this is intended to replace both sun8i-a23-ippo-q8h-v5.dts and sun8i-a23-ippo-q8h-v1.2.dts (these can be fully dropped after a transition period). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-13 19:35:46 +07:00
sun8i-a23-q8-tablet.dtb \
ARM: dts: sun8i-a33: Add dts for Sinlinx SinA33 development board. The SinA33 is a core/SDK development board by Sinlinx. The core board does not have any connectors or pads, other than the pads used to connect it to the SDK board. The core board only has the A33 SoC, 2 RAM chips, an eMMC flash chip, the AXP223 PMIC, and supporting discrete components. eMMC is optional. The SDK board has a USB host, USB OTG, volume control and home buttons, audio input/output jacks, a micro-SD slot, camera and SDIO expansion headers, an LCD connector, and a GPIO expansion header, which has UARTs, MIPI DSI and I2C available. Only UART0 is enabled though. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-02 17:04:03 +07:00
sun8i-a33-et-q8-v1.6.dtb \
ARM: dts: sun8i: Add dts file for the GA10H-A33 tablet The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand, sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot. This commit adds a dts file for the v1.1 pcb with an a33 soc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-03 03:08:02 +07:00
sun8i-a33-ga10h-v1.1.dtb \
ARM: dts: sun8i: Add dts file for inet-d978_rev2 tablets The inet-d978_rev2 is a pcb used in generic A33 based tablets. It features volume buttons, micro-usb otg, headphone connector and a power button. On the board a Realtek RTL8723BS SDIO Wi-Fi module are soldered, and there is also a accompanied board which has a Goodix GT9271 soldered. As this board is desired to create tablets with a Home key dealed by GT9271, a LED is present at the front panel at the position of the Home key. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-26 17:23:56 +07:00
sun8i-a33-inet-d978-rev2.dtb \
ARM: sun8i: dts: Add Ippo-q8h v1.2 with A33 The Ippo-q8h is a tablet circuit board commonly found in cheap Android tablets. The v1.2 version can be used with either an A23 or A33 SoC. This version features 512 MB DRAM, 4G NAND, MMC, LCD, capacitive touchscreen, accelerometer, 2 camera sensors, USB OTG, microphone and speakers. i2c0 is connected to the gsl1680 capacitive touch panel controller, i2c1 is connected to an mma7660 3-axis accelerometer, these peripherals are not supported by the kernel yet, i2c bus functionality has been tested via i2c-dev. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [maxime: Removed the resolution mention, and modified the compatible to have a unique one with the A23 version] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-05-30 21:55:06 +07:00
sun8i-a33-ippo-q8h-v1.2.dtb \
ARM: dts: sun8i: Add dts file for Olimex A33-OLinuXino A33-OLinuXino is A33 development board designed by Olimex LTD. It has AXP223 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector, headphone and mic jacks, connector for LiPo battery and optional 4GB NAND Flash. It has two 40-pin headers. One for LCD panel, and one for additional modules. Also there is CSI/DSI connector. Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-15 14:36:33 +07:00
sun8i-a33-olinuxino.dtb \
ARM: dts: sun8i: Add sun8i-a33-q8-tablet.dts file This is a generic dts file for A33 based q8 formfactor tablets, this is intended to replace both sun8i-a33-ippo-q8h-v1.2.dts and sun8i-a33-et-q8-v1.6.dts (these can be fully dropped after a transition period). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-24 22:23:53 +07:00
sun8i-a33-q8-tablet.dtb \
ARM: dts: sun8i: Add Orange Pi Plus support The Orange Pi Plus is a SBC based on the Allwinner H3 SoC with 8GB eMMC, multiple USB ports through a USB hub chip, SATA through a USB-SATA bridge, one uSD slot, a 10/100/1000M ethernet port, WiFi, HDMI, headphone jack, IR receiver, a microphone, a CSI connector and a 40-pin GPIO header. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-05 04:24:43 +07:00
sun8i-a33-sinlinx-sina33.dtb \
ARM: dts: sun8i: Add A83T HomletV2 Board by Allwinner H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner. It has UART, ethernet, USB, HDMI, etc ports on it. A83T patches are tested on this board. It has UART, ethernet, USB, HDMI, etc ports on it. For FEL mode it needs USB A-A(Male) cable. I used uart0 which is multiplexed to microsd pins PF2 and PF4. Enabled UART0 Header(PB9, PB10 pins). Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-06 20:11:54 +07:00
sun8i-a83t-allwinner-h8homlet-v2.dtb \
ARM: sun8i: a83t: Add device tree for Sinovoip Bananapi BPI-M3 The BPI-M3 is an Allwinner A83T based SBC in the Bananapi/Bpi family. It is roughly the same form factor as the BPI-M1+, with roughly the same peripherals and connectors: - 2GB LPDDR3 DRAM - 8GB eMMC - Micro-SD card slot - HDMI output - Headset (stereo + mic) jack - Onboard mic - Gigabit Ethernet with RTL8211E transceiver - Ampak AP6212 WiFi + BT - USB OTG connector - USB-to-SATA bridge connected through a USB 2.0 hub - Consumer IR receiver - MIPI DSI LCD panel connector - Camera interface (parallel and MIPI CSI) connector - 3 LEDs (Red, Green, Blue), of which 2 are controllable (GB) - Raspberry Pi 2 compatible GPIO header Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-17 10:40:48 +07:00
sun8i-a83t-bananapi-m3.dtb \
ARM: dts: sun8i: Add device tree for Cubietruck Plus Cubietruck Plus is a A83T/H8 based development board. The board has standard DDR3 SDRAM, AXP818 PMIC/codec, SD/MMC, eMMC, USB 2.0 host via HSIC USB Hub, USB OTG, SATA via USB bridge, gigabit ethernet, WiFi, headphone out / mic in, and various GPIO headers. The board also has an EEPROM on i2c0 which holds the MAC address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-16 23:24:57 +07:00
sun8i-a83t-cubietruck-plus.dtb \
arm: dts: sun8i: Add the TBS A711 tablet devicetree The TBS A711 is a tablet with an A83T, a modem, wifi/BT chip, an eMMC and a 1024x600 LVDS display. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-01 20:48:51 +07:00
sun8i-a83t-tbs-a711.dtb \
ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board Banana Pi M2 Zero board is a H2+-based board by Sinovoip, with a form factor and GPIO holes similar to Raspberry Pi Zero. It features: - Allwinner H2+ SoC - Single-chip (16-bit) 512MiB DDR3 DRAM - Ampak AP6212 Wi-Fi/Bluetooth module - MicroSD slot - Two MicroUSB Type-B ports (one can only be used to power the board and the other features OTG functionality) - Two keys, a reset and a GPIO-connected key. - HDMI Type-C (miniHDMI) connector connected to the HDMI part of H2+. - CSI connector to connect the camera sensor provided by Sinovoip. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-02-08 17:06:13 +07:00
sun8i-h2-plus-bananapi-m2-zero.dtb \
ARM: dts: sun8i: h2+: Add Libre Computer Board ALL-H3-CC H2+ ver. This patch adds a device tree file for the H2+ version of the Libre Computer Board ALL-H3-CC. It is the same board first introduced in commit 6ca358645d4d ("ARM: dts: sun8i: h3: Add dts file for Libre Computer Board ALL-H3-CC H3 ver."), with the H3 SoC replaced with the H2+ SoC, and has only two 2Gb DDR3 chips instead of four. The device tree utilizes the common board design file for ALL-H3-CC, providing just the model strings and SoC specifics. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-04-24 18:34:21 +07:00
sun8i-h2-plus-libretech-all-h3-cc.dtb \
ARM: dts: sun8i: h2-plus: Sort dtb entries in Makefile The dtb entry for the Banana Pi M2 Zero in the device tree makefile somehow ended up in between two Orange Pi boards. Move it so the list is properly sorted. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-04-24 18:34:20 +07:00
sun8i-h2-plus-orangepi-r1.dtb \
ARM: dts: sunxi: add support for Orange Pi Zero board Orange Pi Zero is a board that came with the new Allwinner H2+ SoC and a SDIO Wi-Fi chip by Allwinner (XR819). Add a device tree file for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-12-02 22:05:13 +07:00
sun8i-h2-plus-orangepi-zero.dtb \
ARM: dts: sun8i-h3: Rename sinovoip-bpi-m2-plus to bananapi-m2-plus The Banana Pi series is a well known series of single board computers. The manufacturer, Sinovoip, is less well known. Moreover, the board markings do not mention Sinovoip, but only the Banana Pi logo, and the BPI-M* model name. Rename the dts file to use the more well known name. Also fix up some of the model names and labels to match other Banana Pi boards. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-08 09:40:39 +07:00
sun8i-h3-bananapi-m2-plus.dtb \
ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot, 2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the SoC's integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver, a dual colour LED and an optical S/PDIF connector. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-27 02:48:04 +07:00
sun8i-h3-beelink-x2.dtb \
ARM: dts: sun8i: h3: Add dts file for Libre Computer Board ALL-H3-CC H3 ver. The Libre Computer Board ALL-H3-CC from Libre Technology is a Raspberry Pi B+ form factor single board computer based on the Allwinner H3 SoC. The board has 1GB DDR3 SDRAM, provided by 4 2Gb chips. The mounting holes and connectors are in the exact same position as on the Raspberry Pi B+. Raspberry Pi B+ like peripherals supported on this board include: - Power input through micro-USB connector (without USB OTG) - Native 100 Mbps ethernet using the internal PHY, as opposed to USB-based on the RPi - 4x USB 2.0 host ports, directly connected to the SoC, as opposed to being connected through a USB 2.0 hub on the RPi - TV and audio output on a 3.5mm TRRS jack - HDMI output - Micro-SD card slot - Standard RPi B+ GPIO header, with the standard peripherals routed to the same pins. * 5V, 3.3V power, and ground * I2C0 on the H3 is routed to I2C1 pins on the RPi header * I2C1 on the H3 is routed to I2C0 pins on the RPi header * UART1 on the H3 is routed to UART0 pins on the RPi header * SPI0 on the H3 is routed to SPI0 pins on the RPi header, with GPIO pin PA17 replacing the missing Chip Select 1 * I2S1 on the H3 is routed to PCM pins on the RPi header - Additional peripherals from the H3 are available on different pins. These include I2S0, JTAG, PWM1, SPDIF, SPI1, and UART3 In addition, there are a number of new features: - Console UART header - Consumer IR receiver - Camera interface (not compatible with RPi) - Onboard microphone - eMMC expansion module port - Heatsink mounting holes - Power button The power button requires corresponding software for the embedded coprocessor to properly function. This patch adds a dts file for this board that enables all "onboard" peripherals currently supported. This means no display or camera support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-05 13:06:15 +07:00
sun8i-h3-libretech-all-h3-cc.dtb \
ARM: dts: sun8i: Support DTB build for NanoPi M1 The commit 10efbf5f1633 ("ARM: dts: sun8i: Add dts file for NanoPi M1 SBC") introduced NanoPi M1 board but it's missing in Allwinner H3 DTB build. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-12-13 06:18:15 +07:00
sun8i-h3-nanopi-m1.dtb \
ARM: dts: sun8i: h3: Add initial NanoPi M1 Plus support NanoPi M1 Plus is designed and developed by FriendlyElec for professionals, enterprise users, makers and hobbyists using the Allwinner H3 SOC. NanoPi M1 Plus key features - Allwinner H3, Quad-core Cortex-A7@1.2GHz - 1GB DDR3 RAM - 8GB eMMC - microSD slot - 10/100/1000M Ethernet - Serial Debug Port - 5V 2A DC power-supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-05-31 00:42:50 +07:00
sun8i-h3-nanopi-m1-plus.dtb \
ARM: dts: sun8i: Add dts file for the NanoPi NEO SBC The NanoPi NEO is a minimal H3 based SBC. It comes with 256/512M RAM, a micro SD slot, 10/100Mbit ethernet and a single USB-A port. Signed-off-by: James Pettigrew <james@innovum.com.au> Reviewed-by: Rask Ingemann Lambertsen <ccc94453@vip.cybercity.dk> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-06 05:15:56 +07:00
sun8i-h3-nanopi-neo.dtb \
ARM: dts: sun8i: Add dts file for NanoPi NEO Air add support for the NanoPi NEO Air H3 board from friendlyarm.com . This board contains WiFi, Bluetooth, 8GB eMMC storage and 512 MB DDR3 ram. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-09 02:44:44 +07:00
sun8i-h3-nanopi-neo-air.dtb \
ARM: dts: sun8i: Add dts for Orange Pi 2 SBC The Orange Pi 2 is a SBC based on the Allwinner H3 SoC with a uSD slot, 4 USB ports connected via a USB-2 hub, a 10/100M ethernet port using the SoC's integrated PHY, Wifi via a RTL8189ETV sdio wifi chip, USB OTG, HDMI, a TRRS headphone jack for stereo out and composite out, a microphone, an IR receiver, a CSI connector, 2 LEDs, a 3 pin UART header and a 40-pin GPIO header. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-03-23 17:17:05 +07:00
sun8i-h3-orangepi-2.dtb \
ARM: dts: sun8i: Add dts file for the Orange Pi Lite SBC The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM, micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector, sdio attached rtl8189ftv wifi and an ir receiver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-07 21:16:44 +07:00
sun8i-h3-orangepi-lite.dtb \
ARM: dts: sun8i: Add dts file for the Orange Pi One SBC The Orange Pi One SBC, is a stripped down version of the popular Orange Pi PC. The one is a H3 based SBC, with 512M of RAM, micro-sd slot, 1 host usb, 1 otg usb, hdmi and 100Mbit ethernet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-09 20:22:41 +07:00
sun8i-h3-orangepi-one.dtb \
ARM: dts: sun8i: Add Orange Pi PC support The Orange Pi PC is an SBC based on the Allwinner H3 SoC with a uSD slot, 3 USB ports directly from the SoC, a 10/100M ethernet port using the SoC's integrated PHY, USB OTG, HDMI, a TRRS headphone jack for stereo out and composite out, a microphone, an IR receiver, a CSI connector, 2 LEDs, a 3 pin UART header, and a 40-pin GPIO header. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-03-23 04:37:29 +07:00
sun8i-h3-orangepi-pc.dtb \
ARM: dts: sun8i: Add dts file for the Orange Pi PC Plus SBC There is a new Orange Pi PC *Plus* version available now, this is an extended version of the regular Orange Pi PC with sdio wifi and an eMMC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [Maxime: Fix model and compatible] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-27 04:04:31 +07:00
sun8i-h3-orangepi-pc-plus.dtb \
ARM: dts: sun8i-h3: Add dts file for Sinovoip BPI-M2+ The BPI-M2+ is an H3 development board. It is a smaller form factor than the original BPI-M2, with the new H3 SoC. It has 1GB DRAM, 8GB eMMC, a micro SD card slot, HDMI output, 2 USB host connector and 1 USB OTG connector, an IR receiver, WiFi+BT based on Ampak AP6212. The board also has a 3 pin header for (debug) UART, a 40 pin GPIO header based on the Raspberry Pi B+, but the peripheral signals are not the same, and an FPC connector for connecting BPI's camera. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-06-02 14:50:11 +07:00
sun8i-h3-orangepi-plus.dtb \
ARM: dts: sun8i: Add dts file for the Orange Pi Plus2E SBC The Orange Pi Plus2E is an extended version of the Orange Pi Pc Plus, with 2G RAM and an external gbit ethernet phy. Note currently the dts is pretty much empty (except for including the pc-plus dts), I've a local patch which enables the emac actually making this dts different from the pc-plus one, but that needs the h3 emac driver to get merged first. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-03 18:05:18 +07:00
sun8i-h3-orangepi-plus2e.dtb \
ARM: dts: sun8i: Add BananaPI M2-Magic DTS The Bananapi M2-Magic is a board with an A33, a USB host and USB OTG connectors, and 8GB eMMC, an AP6212 WiFi/Bluetooth chip and connectors for DSI, CSI and GPIOs. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: Correct subject prefix case] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-04-11 19:49:56 +07:00
sun8i-r16-bananapi-m2m.dtb \
ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support The Nintendo NES/SuperNES features an R16 already well supported in mainline. The console over UART0 may be wired on two ports of the R16, both available on the NES Classic PCB. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-04-24 22:55:03 +07:00
sun8i-r16-nintendo-nes-classic.dtb \
sun8i-r16-nintendo-super-nes-classic.dtb \
ARM: dts: sunxi: add support for Lichee Pi Zero board Lichee Pi Zero is a small-sized V3s board, which is breadboard-compatible, and with a MicroUSB port with both OTG function and power function. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 00:54:48 +07:00
sun8i-r16-parrot.dtb \
ARM: dts: sun8i: Add board dts file for Banana Pi M2 Ultra The Banana Pi M2 Ultra is an SBC based on the Allwinner R40 SoC. The form factor and position of various connectors, leds and buttons is similar to the Banana Pi M1+, Banana Pi M3, and is exactly the same as the latest Banana Pi M64. It features: - X-Powers AXP221s PMIC connected to i2c0 - 2 GB DDR3 DRAM - 8 GB eMMC - micro SD card slot - DC power jack - HDMI output - MIPI DSI connector - 2x USB 2.0 hosts - 1x USB 2.0 OTG - gigabit ethernet with Realtek RTL8211E transceiver - WiFi/Bluetooth with AP6212 chip, with external antenna connector - SATA and power connectors for native SATA support - camera sensor connector - consumer IR receiver - audio out headphone jack - onboard microphone - red, green, and blue LEDs - debug UART pins - Li-Po battery connector - Raspberry Pi B+ compatible GPIO header - power, reset, and boot control buttons This patch adds a dts file that enables UART, MMC and PMIC support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-06 13:42:32 +07:00
sun8i-r40-bananapi-m2-ultra.dtb \
ARM: sun8i: v3s: add support for Lichee Pi Zero w/ dock board The Lichee Pi Zero board has a "dock board" which needs to be soldered with the 1.27mm stamp holes on a Lichee Pi Zero board. It features: - Onboard MIC and headphone jack (not supported yet) - Ethernet port (not supported yet) - An extra MicroSD slot connected to MMC1 controller - four keys connected to the LRADC. As it needs to be soldered with the main board to use, add a stand-alone device tree for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-05-15 15:40:01 +07:00
sun8i-v3s-licheepi-zero.dtb \
ARM: dts: sun8i: Add board dts file for Banana Pi M2 Berry The Banana Pi M2 Ultra is an SBC based on the Allwinner V40 SoC (same as the R40 SoC). The form factor is similar to the Raspberry Pi series. It features: - X-Powers AXP221s PMIC connected to i2c0 - 1GiB DDR3 DRAM - microSD slot - MicroUSB Type-B port for power and connected to usb0 - HDMI output - MIPI DSI connector - 4 USB Type-A ports (connected to the usb1 controller via a hub) - gigabit ethernet with Realtek RTL8211E transceiver - WiFi/Bluetooth with AP6212 module, with external antenna connector - SATA and power connectors for native SATA support - camera sensor connector - audio out headphone jack - red and green LEDs - debug UART pins - Raspberry Pi B+ compatible GPIO header - power and reset buttons This patch adds a dts file that enables UART, MMC and PMIC support. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-06 13:42:33 +07:00
sun8i-v3s-licheepi-zero-dock.dtb \
sun8i-v40-bananapi-m2-berry.dtb
ARM: dts: sun9i: Add A80 Optimus Board support The A80 Optimus Board is was launched with the Allwinner A80 SoC. It was jointly developed by Allwinner and Merrii. This board has a UART port, a JTAG connector, USB host ports, a USB 3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash, 4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone jack, IR receiver, and additional GPIO headers. This patch adds only basic support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Andreas Färber <afaerber@suse.de>
2014-10-08 20:02:54 +07:00
dtb-$(CONFIG_MACH_SUN9I) += \
ARM: dts: add cubietech cubieboard4 Add a Cubietech Cubieboard4 device tree and instruct make to build it. This device tree has been derived from the sun9i-a80-optimus.dts as they are very similar in design[1]. Notably, I2C3 is not used on Cubieboard4 and the LED/PWM definitions will need to be updated in the future. [1] http://dl.cubieboard.org/model/cc-a80/Hardware/CC-A80-HW-V1.1.pdf Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-03-10 03:19:57 +07:00
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
ARM: dts: tango4: Initial device trees This device tree was tested on a Sigma Designs SMP8758 Vantage-1172 Rev E1 development board. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-15 16:39:19 +07:00
dtb-$(CONFIG_ARCH_TANGO) += \
tango4-vantage-1172.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
tegra20-harmony.dtb \
ARM: tegra: Add Toradex Iris carrier board DT with T20 512MB COM This adds the device tree for the Toradex Iris carrier board used together with a Colibri T20 512MB COM. The Iris has the following features, in brackets the current status: - DVI and VGA output through DVI-I connector (DVI-D enabled and tested) - LVDS output - 1 USB host port (enabled and tested) - 1 USB OTG port (enabled) - 100 MBit Ethernet (enabled and tested) - 5 UART ports (2 on 10way headers enabled and tested) - 1 MicroSD Slot (enabled and tested) - Audio connectors (enabled, only HP out and Line-in tested) - i2c RTC - GPIO connector (enabled, only sparsely tested) - external i2c bus - 4 PWM out - analog in Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-23 04:46:09 +07:00
tegra20-iris-512.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 12:53:18 +07:00
tegra20-medcom-wide.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
tegra20-paz00.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 12:53:18 +07:00
tegra20-plutux.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
tegra20-seaboard.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 12:53:18 +07:00
tegra20-tec.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
tegra20-trimslice.dtb \
ARM: tegra: remove Whistler support Whistler is an ancient Tegra 2 reference board. I may have been the only person who ever used it with upstream software, and I've just recycled the board hardware. Hence, it makes sense to remove support from software. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-14 01:55:58 +07:00
tegra20-ventana.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
ARM: tegra: initial support for apalis t30 This patch adds the device tree to support Toradex Apalis T30, a computer on module which can be used on different carrier boards. The module consists of a Tegra 3 SoC, two PMICs, 1 or 2 GB of DDR3L RAM, eMMC, an LM95245 temperature sensor chip, an i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller as well as two MCP2515 CAN controllers. Furthermore, there is an SGTL5000 audio codec which is not yet supported. Anything that is not self contained on the module is disabled by default. The device tree for the Evaluation Board includes the modules device tree and enables the supported peripherals of the carrier board (the Evaluation Board supports almost all of them). While at it also add the device tree binding documentation for Apalis T30. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [swarren: fixed some node sort orders] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-10 05:52:46 +07:00
tegra30-apalis-eval.dtb \
ARM: DT: tegra: Add Tegra30 Beaver board support This patch adds support for Tegra30 Beaver board in upstream kernel. Beaver board is a Tegra30 SoC based development board, it has following features: - T30 or T33 SoC (Qual core ARM Cortex A9) - 2 GB DDR3L - 16 GB EMMC - 1 SD slot - 1 USB Standart A port and 1 USB micro AB port - PCI-E Gig Ethernet - Audio input/output - SATA port - HDMI output - UART and JTAG Signed-off-by: Bryan Wu <pengw@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-03 06:53:51 +07:00
tegra30-beaver.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 12:53:18 +07:00
tegra30-cardhu-a02.dtb \
ARM: dt: tegra114: Add new board, Dalmore Add a new evaluation board, Dalmore for Tegra 114 family. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-24 08:10:24 +07:00
tegra30-cardhu-a04.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
tegra30-colibri-eval-v3.dtb
dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
ARM: tegra: add Venice2 board support Add support for the Tegra124 based Venice2 reference board. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-08 11:50:06 +07:00
tegra114-dalmore.dtb \
ARM: tegra: add device tree for SHIELD NVIDIA SHIELD is a portable Android console containing a Tegra 4 SoC with 2GB RAM and a 720p panel. The following hardware is enabled by this device tree: UART, eMMC, USB (needs external power), PMIC, backlight, joystick, SD card, GPIO keys. DSI panel, HDMI output, charger, self-powered USB, audio, wifi bluetooth are not supported yet but might be by future patches (likely in that order). Touch panel and sensors will probably never be supported. Initrd addresses are hardcoded to match the static values used by the bootloader, since it won't add them for us. All the same, a kernel command-line is provided to replace the one passed by the bootloader which is filled with garbage. NVIDIA SHIELD is typically booted with an appended DTB to avoid modifications made by the bootloader. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> [swarren, fixed gpio-keys child node sort order, patch description] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-05-12 15:26:49 +07:00
tegra114-roth.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
tegra114-tn7.dtb
dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
ARM: tegra: Initial support for Apalis TK1 This patch adds the device tree to support Toradex Apalis TK1 a computer on module which can be used on different carrier boards. The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of DDR3L RAM, a bunch of level shifters, an eMMC, a TMP451 temperature sensor chip, an I210 gigabit Ethernet controller and a SGTL5000 audio codec. Furthermore, there is a Kinetis MK20DN512 companion micro controller for analogue, CAN and resistive touch functionality which is not yet supported. Anything that is not self contained on the module is disabled by default. The device tree for the Evaluation Board includes the module's device tree and enables the supported peripherals of the carrier board (the Evaluation Board supports almost all of them). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-30 05:23:17 +07:00
tegra124-apalis-eval.dtb \
ARM: tegra: apalis-tk1: Support v1.2 hardware revision Support the V1.2 hardware revision with the following pin muxing changes: Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4 are now used as DDC pins. Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are now used as USB power enable signals. Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power enable signals are now used as GPIO3 and GPIO4. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-02-10 08:38:06 +07:00
tegra124-apalis-v1.2-eval.dtb \
ARM: tegra: add Jetson TK1 device tree Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124, 2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI, audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing GPIOs, I2C, SPI, CSI, eDP, etc. The following features work with this device tree: UART, SD card, eMMC, SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system power-off, suspend/resume (LP1) with wake via RTC alarm. The following features should work with this device tree, but are not validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the power button. The following features are not yet implemented in this device tree: Most voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini- PCIe connector), CSI, SATA. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
tegra124-jetson-tk1.dtb \
ARM: tegra: add Acer Chromebook 13 device tree The Acer Chromebook 13, codenamed Big, contains an NVIDIA tegra124 processor and is similar to the Venice2 reference platform. The keyboard, USB 2, audio, sdcard and emmc have been tested and work on the 1366x768 models. The Full HD models haven't been tested yet. WiFi does not yet work, it needs at least some PMIC changes to enable the 32k clock. The elan trackpad is not yet functional but hopefully will be soon as there are patches under review. There is also an issue on reboot because the TPM isn't reset. It will cause the stock firmware to enter recovery mode. This can be worked around by an EC-reset, press the refresh and power keys at the same time. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-09-05 05:20:35 +07:00
tegra124-nyan-big.dtb \
ARM: tegra: Add DTS for the nyan-blaze board It's commercial name is HP Chromebook 14 and is substantially similar to the Acer Chromebook 13 (nyan-big). Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-18 16:52:19 +07:00
tegra124-nyan-blaze.dtb \
ARM: tegra: add Venice2 board support Add support for the Tegra124 based Venice2 reference board. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-08 11:50:06 +07:00
tegra124-venice2.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_U300) += \
ste-u300.dtb
dtb-$(CONFIG_ARCH_U8500) += \
ste-snowball.dtb \
ARM: Tidy up DTB Makefile entries Few things were out of order: - removed ARCH_BCM2835 duplicate - shuffled ARCH_BCM_5301X, ARCH_U8500 and ARCH_U300 around so to keep the list sorted Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Signed-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-14 16:55:01 +07:00
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
ste-hrefv60plus-stuib.dtb \
ARM: ux500: Drop the U8540 device trees The U8540 was an evolved version of the U8500, but it was never mass produced or put into products, only reference designs exist. The upstream support was never completed and it is unlikely that this will happen so drop the support for now to simplify maintenance of the U8500. Cc: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-07 20:32:29 +07:00
ste-hrefv60plus-tvk.dtb
ARM: dts: UniPhier: add support for UniPhier SoCs and boards Initial device trees for UniPhier SoCs: PH1-sLD3, PH1-LD4, PH1-Pro4, and PH1-sLD8. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-08 11:07:13 +07:00
dtb-$(CONFIG_ARCH_UNIPHIER) += \
ARM: dts: uniphier: match DT names to other projects and documents All UniPhier device trees have the common prefix "uniphier-", so "ph1-" is just making names longer. Recent documents and other projects are not using PH1- prefixes any more. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-30 12:02:41 +07:00
uniphier-ld4-ref.dtb \
uniphier-ld6b-ref.dtb \
uniphier-pro4-ace.dtb \
uniphier-pro4-ref.dtb \
uniphier-pro4-sanji.dtb \
uniphier-pxs2-gentil.dtb \
uniphier-pxs2-vodka.dtb \
uniphier-sld8-ref.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_VERSATILE) += \
versatile-ab.dtb \
ARM: dts: Add Versatile IB2 device tree The Versatile board can be equipped with a interface board just named "IB2". This was created in the early 2000s for prototyping GSM candybar phone form factor products. The IB2 board contains: - Cascaded interrupt controller - Enfora Enabler GSM0308 quad-band module with antenna and separate audio jack - Keypad with joystick - Sanyo 2.5" color display - A 28-pin connector for mounting a camera This adds a DTS file for the combination of the Versatile AB with an IB2 daughterboard mounted, making the LED blink and making the system controller available for drivers, such as the panel driver. The device tree bindings already exist in Documentation/devicetree/bindings/arm/arm-boards. Cc: Mali DP Maintainers <malidp@foss.arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-26 15:50:55 +07:00
versatile-ab-ib2.dtb \
ARM: versatile: add versatile dtbs to dtbs target Add the versatile platform dtbs to the dtbs make rule. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-03-14 09:31:42 +07:00
versatile-pb.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_VEXPRESS) += \
vexpress-v2p-ca5s.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
xen: move the xenvm machine to mach-virt xenvm is based on mach-vexpress, move it to mach-virt. Changes in v4: - update the dts Makefile too. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> CC: Marc Zyngier <marc.zyngier@arm.com> CC: will.deacon@arm.com CC: arnd@arndb.de CC: rob.herring@calxeda.com
2013-04-23 21:51:11 +07:00
vexpress-v2p-ca15_a7.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_VIRT) += \
xenvm-4.2.dtb
dtb-$(CONFIG_ARCH_VT8500) += \
vt8500-bv07.dtb \
dtb: Add arch-vt8500 board files to arch/arm/boot/dts/Makefile Add board files (vt8500-bv07, wm8505-ref and wm8650-mid) to allow 'make dtbs' on arch-vt8500. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-07 08:14:41 +07:00
wm8505-ref.dtb \
dts: vt8500: Add initial dts support for WM8850 This patch adds a soc dtsi for the Wondermedia WM8850. A board dts file is also included for the W70v2 tablet, with support for all the drivers currently in mainline. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-19 13:44:28 +07:00
wm8650-mid.dtb \
dts: vt8500: Add devicetree support for WM8750 SoC and APC8750 board This patch adds support for the WonderMedia WM8750 SoC and the VIA APC8750 board. Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
2013-04-23 05:55:57 +07:00
wm8750-apc8750.dtb \
dts: vt8500: Add initial dts support for WM8850 This patch adds a soc dtsi for the Wondermedia WM8850. A board dts file is also included for the W70v2 tablet, with support for all the drivers currently in mainline. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-19 13:44:28 +07:00
wm8850-w70v2.dtb
ARM: dts: zynq: Add Parallella device tree This allows to boot the Adapteva Parallella board to serial console. Cc: Andreas Olofsson <andreas@adapteva.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-25 06:00:12 +07:00
dtb-$(CONFIG_ARCH_ZYNQ) += \
arm: zynq: Add Xilinx cc108 board The board contains 7z010 with 512MB memory, ethernet, qspi, uart, usbs and sd. But board is not supporting booting from sd card. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-01-17 20:25:16 +07:00
zynq-cc108.dtb \
arm: dts: zynq: Add MicroZed board support Added basic dts support for MicroZed board. - UART - SDHCI - Ethernet Cc: Soren Brinkmann <soren.brinkmann@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-23 16:48:33 +07:00
zynq-microzed.dtb \
ARM: dts: zynq: Add Parallella device tree This allows to boot the Adapteva Parallella board to serial console. Cc: Andreas Olofsson <andreas@adapteva.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-25 06:00:12 +07:00
zynq-parallella.dtb \
zynq-zc702.dtb \
arm: dt: zynq: Add support for the zed platform Add a DT fragment for the Zed Zynq platform and a corresponding target to the Makefile Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-13 23:37:18 +07:00
zynq-zc706.dtb \
arm: zynq: Add support for Xilinx zc770 xm010 dc1 board zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-01-17 20:58:44 +07:00
zynq-zc770-xm010.dtb \
arm: zynq: Add support for Xilinx zc770 xm011 dc2 board zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, i2c, nand uart, spi and usb. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-01-17 21:07:46 +07:00
zynq-zc770-xm011.dtb \
arm: zynq: Add support for Xilinx zc770 xm012 dc3 board zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, 2x i2c, nor flash, spi and uart. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-01-17 21:12:16 +07:00
zynq-zc770-xm012.dtb \
arm: zynq: Add support for Xilinx zc770 xm013 dc4 board zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, ethernet, i2c, qspi, spi and uart. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-01-17 21:15:42 +07:00
zynq-zc770-xm013.dtb \
arm: dts: zynq: Add Digilent ZYBO board Add a DTS describing the Digilent ZYBO board. Similar to ZED but with a 50MHz crystal instead of 33MHz. Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-12-01 07:25:50 +07:00
zynq-zed.dtb \
arm: dts: zynq: Add Digilent Zybo Z7 board This add a DTS for the Digilent Zybo Z7 board. This board is the successor board of Zybo, these are almost the same except for ps-clk-frequency specifications. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu@cybertrust.co.jp> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-02-28 09:25:52 +07:00
zynq-zybo.dtb \
zynq-zybo-z7.dtb
mvebu dt changes for v3.15 (incremental pull #3) - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJTFTyxAAoJEP45WPkGe8ZnDnwP/j1mxhzK7jY6KHJlY79Z/Bjr ZXGcVZIcmzYQMEaEcpT1lMtzQnxRf9xqd8JMr2k33oNe0uzEOp6wiSfIkw7aldkV s2ZGp0PjaVhJZqhgzbH0LJhid73RRBTCUGNrzCYDQt9BWkvJygnP7iFjNHQzijVJ UjpXhxVdVXpx9RTVwgcHs7GtDskrUhiPBlDcJePuk3q8oRwNJA+jDiWxBTALtABd JdvpaNW4RHFR1KAoHTqxhFuS61W+DF3IQalH8PpcYHYV/MXs1QByP1nbEira7Dav HuIgGtiltfObMHN6DrU4uPQFvb0Ab13q5WoZmW4bR9Y01wpM5TgOQxXpLZi/aCbV dr4UmbcUSo9MDCMZvOEIHC+7FW5LutVNt4IwqQN/bJQyK1aZMjJTS4aVxmU+2Vl+ mIaPyh3ePXAtGEg3Ai7iWfbEMANKz2qoqShckxbqEPLsDCeYY4ar9TnUHHSc8Mat LskwGE25ACcaQkf1vFkZNSaezEiB9yai37yGKu83FyYk8Vi/hsLxeb6EBHKULC// 8uU4abC12nw8KAX/sHStjMKa64upoyycczVxhKjwLPmgwSSW47m8ZyE+tzxpNBE3 4oBLB4C9lCouUXrpOxkkRv0uSSeJ/1dW8IhSxFWQuNRi2rl2KJsKzYKIWLEjNbqT YrrarK14xpMewjJduvat =38NX -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper: - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) * tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add dts file describing HP T5325 thin client ARM: kirkwood: Add i2c alias so setting bus number ARM: kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: select dtbs from MACH_ARMADA_* ARM: dove: add global-config register node ARM: dove: add additional pinctrl registers ARM: mvebu: Instantiate system controller in kirkwood.dtsi ARM: kirkwood: Instantiate L2 cache from DT. ARM: mvebu: use macros for interrupt flags on Armada 375/38x ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs ARM: mvebu: use C preprocessor include for Armada 375/38x DTs ARM: Kirkwood: Add support for many Synology NAS devices DT: i2c: Trivial: Add sii,s35390a DT: Vendor prefixes: Add ricoh, qnap, sii and synology ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: add Device Tree for the Armada 385 DB board ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs ARM: mvebu: add Device Tree for the Armada 375 DB board ARM: mvebu: add Device Tree description of the Armada 375 SoC ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:02:46 +07:00
dtb-$(CONFIG_MACH_ARMADA_370) += \
armada-370-db.dtb \
ARM: mvebu: dts: Add dts file for DLink DNS-327L DNS-327L is a 2-bay NAS with the following specs: - 512MiB RAM - 128MiB NAND Flash - 1 GbE interface (Marvell PHY) - 1 rear USB 3.0 port (via PCIe USB 3.0 controller) - 2 internal SATA ports handled by the Armada 370: uses 2 gpios for power control - two front 2-color leds (amber + white) for both discs, controlled by the SoC - One white LED handled by SoC (USB) - 3 buttons. Power handled by weltrend, USB and RESET (on the bottom) are wired via GPIOs - Unidentified i2c device at address 0x13 (via i2cdetect) - UART0 providing serial console - Weltrend MCU serving for RTC, temperature, fan control, and power button handling interfaced via UART1 (Handled via userspace dns320l-daemon) Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-05-26 22:51:11 +07:00
armada-370-dlink-dns327l.dtb \
mvebu dt changes for v3.15 (incremental pull #3) - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJTFTyxAAoJEP45WPkGe8ZnDnwP/j1mxhzK7jY6KHJlY79Z/Bjr ZXGcVZIcmzYQMEaEcpT1lMtzQnxRf9xqd8JMr2k33oNe0uzEOp6wiSfIkw7aldkV s2ZGp0PjaVhJZqhgzbH0LJhid73RRBTCUGNrzCYDQt9BWkvJygnP7iFjNHQzijVJ UjpXhxVdVXpx9RTVwgcHs7GtDskrUhiPBlDcJePuk3q8oRwNJA+jDiWxBTALtABd JdvpaNW4RHFR1KAoHTqxhFuS61W+DF3IQalH8PpcYHYV/MXs1QByP1nbEira7Dav HuIgGtiltfObMHN6DrU4uPQFvb0Ab13q5WoZmW4bR9Y01wpM5TgOQxXpLZi/aCbV dr4UmbcUSo9MDCMZvOEIHC+7FW5LutVNt4IwqQN/bJQyK1aZMjJTS4aVxmU+2Vl+ mIaPyh3ePXAtGEg3Ai7iWfbEMANKz2qoqShckxbqEPLsDCeYY4ar9TnUHHSc8Mat LskwGE25ACcaQkf1vFkZNSaezEiB9yai37yGKu83FyYk8Vi/hsLxeb6EBHKULC// 8uU4abC12nw8KAX/sHStjMKa64upoyycczVxhKjwLPmgwSSW47m8ZyE+tzxpNBE3 4oBLB4C9lCouUXrpOxkkRv0uSSeJ/1dW8IhSxFWQuNRi2rl2KJsKzYKIWLEjNbqT YrrarK14xpMewjJduvat =38NX -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper: - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) * tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add dts file describing HP T5325 thin client ARM: kirkwood: Add i2c alias so setting bus number ARM: kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: select dtbs from MACH_ARMADA_* ARM: dove: add global-config register node ARM: dove: add additional pinctrl registers ARM: mvebu: Instantiate system controller in kirkwood.dtsi ARM: kirkwood: Instantiate L2 cache from DT. ARM: mvebu: use macros for interrupt flags on Armada 375/38x ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs ARM: mvebu: use C preprocessor include for Armada 375/38x DTs ARM: Kirkwood: Add support for many Synology NAS devices DT: i2c: Trivial: Add sii,s35390a DT: Vendor prefixes: Add ricoh, qnap, sii and synology ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: add Device Tree for the Armada 385 DB board ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs ARM: mvebu: add Device Tree for the Armada 375 DB board ARM: mvebu: add Device Tree description of the Armada 375 SoC ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:02:46 +07:00
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
armada-370-netgear-rn104.dtb \
arm: mvebu: add .dts file for Synology DS213j Synology DS213j is a 2-bay NAS powered by a Marvell Armada 370 (88F6710 @1.2Ghz). It is very similar on many aspects to previous 2-bay synology models based on Marvell kirkwood SoC. Here is a short summary of the device: - 512MB RAM - boot on SPI flash (64Mbit Micron N25Q064) - 1 GbE interface (Armada MAC connected to a Marvell 88E1512 PHY via SGMII) - 2 rear USB 2.0 ports (directly handled by the Armada 370) - 2 internal SATA ports handled by the Armada 370: 2 GPIO for presence, 2 for powering them - two front amber LED (disk1, disk2) controlled by the SoC - Seiko S-35390A I2C RTC chip - UART0 providing serial console - UART1 used for poweroff (connected to a TI MSP430F2111) - Fan handled via 4 GPIO (3 for speed, 1 for alarm) Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/20f1a03897df1d825b62abdd525e588a8e39b3ec.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-22 06:46:49 +07:00
armada-370-rd.dtb \
ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay This patch adds DT support for the Seagate NAS 2 and 4-Bay. Here are some information allowing to identify these devices: Product name | Seagate NAS 2-Bay | Seagate NAS 4-Bay Code name (board/PCB) | Dart 2-Bay | Dart 4-Bay Model name (case sticker) | SRPD20 | SRPD40 Material desc (product spec) | STCTxxxxxxx | STCUxxxxxxx Chipset list (common): - SoC Marvell Armada 370 88F6707, CPU @1.2GHz - SDRAM memory: 512MB DDR3 600MHz (16-bits bandwidth) - NAND flash 256MB, 8-bits (Micron MT29F2G08AAB or Hinyx H27U2G8F2CTR-BC) - 2 SATA II ports (SoC) - 1 Ethernet Gigabit ports (PHY Marvell 88E1518) - 2 USB3 host ports (PCIe controller ASM1042) - GPIO fan (4 speeds) - External I2C RTC (MCP7940NT) - 3 push buttons (power, backup and reset) - 2 SATA LEDs (bi-color, blue and red) - 1 power LED (bi-color, blue and red) Only on 4-Bay models: - 2 extra SATA III ports (PCIe AHCI controller Marvell 88SE9170) - 1 extra Ethernet Gigabit ports (PHY Marvell 88E1518) - I2C GPIO expander (PCA9554A) - 2 extra SATA LEDs (bi-color, blue and red) Note that support for the white SATA LEDs associated with HDDs 0 and 1 is missing. A dedicated LED driver is needed. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-10-06 21:13:42 +07:00
armada-370-seagate-nas-2bay.dtb \
armada-370-seagate-nas-4bay.dtb \
ARM: mvebu: add DT support for Seagate Personal Cloud This patch adds DT support for the Seagate Personal Cloud 1 and 2-Bay. Here are some information allowing to identify these devices: Product name | Personal Cloud | Personal Cloud 2-Bay Code name (board/PCB) | Cumulus | Cumulus Max Model name (case sticker) | SRN21C | SRN22C Material desc (product spec) | STCRxxxxxxx | STCSxxxxxxx Chipset list: - SoC Marvell Armada 370 88F6707, CPU @1GHz - SDRAM memory: 512MB DDR3 667MHz (16-bits bandwidth) - SPI flash 1MB (Macronix MX25L8006E) - 1 or 2 SATA internal ports - 1 Ethernet Gigabit port (PHY Marvell 88E1518) - 1 USB3 host port (PCIe controller ASM1042) - 1 USB2 host port (SoC) - 2 push buttons (power and reset) - 1 SATA LED (bi-color, white and red) Note that support for the white SATA LED is missing. A dedicated LED driver is needed. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-10-06 21:13:43 +07:00
armada-370-seagate-personal-cloud.dtb \
armada-370-seagate-personal-cloud-2bay.dtb \
arm: mvebu: add .dts file for Synology DS213j Synology DS213j is a 2-bay NAS powered by a Marvell Armada 370 (88F6710 @1.2Ghz). It is very similar on many aspects to previous 2-bay synology models based on Marvell kirkwood SoC. Here is a short summary of the device: - 512MB RAM - boot on SPI flash (64Mbit Micron N25Q064) - 1 GbE interface (Armada MAC connected to a Marvell 88E1512 PHY via SGMII) - 2 rear USB 2.0 ports (directly handled by the Armada 370) - 2 internal SATA ports handled by the Armada 370: 2 GPIO for presence, 2 for powering them - two front amber LED (disk1, disk2) controlled by the SoC - Seiko S-35390A I2C RTC chip - UART0 providing serial console - UART1 used for poweroff (connected to a TI MSP430F2111) - Fan handled via 4 GPIO (3 for speed, 1 for alarm) Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/20f1a03897df1d825b62abdd525e588a8e39b3ec.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-22 06:46:49 +07:00
armada-370-synology-ds213j.dtb
mvebu dt changes for v3.15 (incremental pull #3) - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJTFTyxAAoJEP45WPkGe8ZnDnwP/j1mxhzK7jY6KHJlY79Z/Bjr ZXGcVZIcmzYQMEaEcpT1lMtzQnxRf9xqd8JMr2k33oNe0uzEOp6wiSfIkw7aldkV s2ZGp0PjaVhJZqhgzbH0LJhid73RRBTCUGNrzCYDQt9BWkvJygnP7iFjNHQzijVJ UjpXhxVdVXpx9RTVwgcHs7GtDskrUhiPBlDcJePuk3q8oRwNJA+jDiWxBTALtABd JdvpaNW4RHFR1KAoHTqxhFuS61W+DF3IQalH8PpcYHYV/MXs1QByP1nbEira7Dav HuIgGtiltfObMHN6DrU4uPQFvb0Ab13q5WoZmW4bR9Y01wpM5TgOQxXpLZi/aCbV dr4UmbcUSo9MDCMZvOEIHC+7FW5LutVNt4IwqQN/bJQyK1aZMjJTS4aVxmU+2Vl+ mIaPyh3ePXAtGEg3Ai7iWfbEMANKz2qoqShckxbqEPLsDCeYY4ar9TnUHHSc8Mat LskwGE25ACcaQkf1vFkZNSaezEiB9yai37yGKu83FyYk8Vi/hsLxeb6EBHKULC// 8uU4abC12nw8KAX/sHStjMKa64upoyycczVxhKjwLPmgwSSW47m8ZyE+tzxpNBE3 4oBLB4C9lCouUXrpOxkkRv0uSSeJ/1dW8IhSxFWQuNRi2rl2KJsKzYKIWLEjNbqT YrrarK14xpMewjJduvat =38NX -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper: - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) * tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add dts file describing HP T5325 thin client ARM: kirkwood: Add i2c alias so setting bus number ARM: kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: select dtbs from MACH_ARMADA_* ARM: dove: add global-config register node ARM: dove: add additional pinctrl registers ARM: mvebu: Instantiate system controller in kirkwood.dtsi ARM: kirkwood: Instantiate L2 cache from DT. ARM: mvebu: use macros for interrupt flags on Armada 375/38x ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs ARM: mvebu: use C preprocessor include for Armada 375/38x DTs ARM: Kirkwood: Add support for many Synology NAS devices DT: i2c: Trivial: Add sii,s35390a DT: Vendor prefixes: Add ricoh, qnap, sii and synology ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: add Device Tree for the Armada 385 DB board ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs ARM: mvebu: add Device Tree for the Armada 375 DB board ARM: mvebu: add Device Tree description of the Armada 375 SoC ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:02:46 +07:00
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
ARM: mvebu: Add Armada 385 Access Point Development Board support The A385-AP is a board produced by Marvell that holds 3 mPCIe slot, a 16MB SPI-NOR, 3 Gigabit Ethernet ports, USB3 and NAND flash storage. [gregory.clement@free-electrons.com: switch the license to the dual X11/GPL with the agreement of the author] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09 00:38:09 +07:00
armada-385-db-ap.dtb \
ARM: mvebu: add support for the new Armada 385 based Linksys boards This patch adds support for the Linksys WRT1200AC (Caiman) and the Linksys WRT1900AC v2 (Cobra). Both boards have: - 2 Marvell 88W8864 radios - 1 USB 3.0 port - 1 USB 2.0/eSATAp port - 2 Ethernet interfaces connected to a 88E6176 switch (1x WAN + 4x LAN) - 128MB NAND flash - 512MB RAM gregory.clement@free-electrons.com: use serial0:115200n8 in stdout-path and remove the bootargs part in the chosen node Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-05-21 04:14:16 +07:00
armada-385-linksys-caiman.dtb \
armada-385-linksys-cobra.dtb \
ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango) The Linksys WRT3200ACM (Rango) is the lates Armada-385 based router in the Linksys WRT AC Series which got released in October 2016. Key differences to the earlier Armada-385 based devices in the series is a bigger flash chip, next generation wireless modules (Marvell 88W8964) in the mini pcie slots as well as a Marvell SD8887. Finally the CPU is clocked at 1866 GHz by default. The file armada-385-linksys-rango.dts is loosly based off of a DTS authored by Imre Kaloz. As Rango is part of the armada-385-linksys family of boards use the armada-385-linksys.dtsi as basis. As for functional differences to Imre Kaloz dts, the wlan LEDs aren't connected to the expander chip pca9635 but directly to GPIOs. Then mpp47 controls the USB2.0 port and not the USB3.0 port, so use the correct GPIO mpp44 for it. Finally use non-removable instead of broken-cd with the sdhci node to avoid polling. Other changes can be categorized as just cleanup / reorganization due to using the armada-385-linksys.dtsi. URL: https://github.com/openwrt/openwrt/blob/0abc3fa5a996daf7dafdc7794ccfe3fa7e955c5a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-05-24 13:16:46 +07:00
armada-385-linksys-rango.dtb \
ARM: dts: armada-385: add support for the Linksys WRT1900ACS (Shelby) The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in the Linksys WRT AC Series which got released in October 2015. The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and originally authored by Imre Kaloz. URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts CC: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-02-15 02:17:42 +07:00
armada-385-linksys-shelby.dtb \
ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS This commit adds the device tree description for the Synology DS116 NAS. It is a one-bay NAS powered by a Marvell Armada 385 at 1.866 GHz. The device features the following items : - 1 GB DDR3 RAM - a 8MB SPI flash - 2 USB3 ports, power-controlled via a GPIO for each - 1 gigabit ethernet interface connected over SGMII to a 88e1514 phy - a single SATA port, power-controlled via a GPIO - a battery-powered RTC - one UART connected to the serial console (2mm connector on board) - the Tx line of the second UART connected to a PIC microcontroller dealing with beep, reset, power-off and LED blinking (9600 Bps) - some of the front-panel LEDs are connected to GPIOs, one is directly connected to the SATA link to report disk activity. - a GPIO-controlled fan (3 bits for 7 speeds and OFF) With this DTS, my NAS is 100% functional starting with kernel 4.9. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-02-12 16:30:35 +07:00
armada-385-synology-ds116.dtb \
ARM: dts: add support for Turris Omnia This machine is an open hardware router by cz.nic driven by a Marvell Armada 385. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-11-25 21:26:58 +07:00
armada-385-turris-omnia.dtb \
ARM: dts: Add SolidRun Armada 388 Clearfog A1 DT file Add support for the SolidRun Armada 388 Clearfog A1 board. This board has an Armada 388 microsom, dedicated gigabit ethernet, six switched gigabit ethernet ports, SFP cage, two Mini-PCIe/mSATA slots, a m.2 SATA slot, and a MikroBUS connector to allow MikroBUS modules to be added. This DT file adds support for all board facilities with the exception of full SFP support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-07 04:52:06 +07:00
armada-388-clearfog.dtb \
ARM: dts: armada388-clearfog: add base model DTS file Add the DTS file to describe the clearfog base model. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-01-02 21:59:17 +07:00
armada-388-clearfog-base.dtb \
ARM: dts: armada388-clearfog: add pro model DTS file Add the DTS file to describe the clearfog pro model - we update the platform name and compatible string compared to the original version. The original version remains for compatibility for the time being as the name of the file has become established, and the machine name and/or compatible may be used by userspace. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-01-02 21:59:22 +07:00
armada-388-clearfog-pro.dtb \
ARM: mvebu: Add Device Tree description of the Armada 388 SoC This SoC belongs to the Armada 38x family. The main difference with the Armada 385 is that the 388 can handle two more SATA ports. Currently the consequence is the use of a different compatible string for the pinctrl node, in order to be able to use the pins associated to this 2 new SATA ports. The second SATA controller has also been moved from the armada38x.dtsi as it it specific to the Armada388 version. In the same time the Armada385 DB and Armada 385 RD board have been renamed in the 388 one and now include the armada-388.dtsi file. AS both of them have 4 SATA ports the SoC used on them were wrongly described. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09 00:38:13 +07:00
armada-388-db.dtb \
ARM: mvebu: Add Armada 388 General Purpose Development Board support The A388-GP is a board produced by Marvell that holds - 1 PCIe slot - 2 mini PCIe slot (one of them is multiplexed with the PCIe slot, muxing is selected through the GPIO expander) - 1 16MB SPI-NOR - 2 Gigabit Ethernet ports - 4 SATA ports (2 of them are multiplexed with the mini PCIe slots, muxing is selected through the GPIO expander) - 1 SDIO slot - 1 USB3 port - 2 USB2 port - 2 GPIO/interrupts expander on I2C Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09 01:11:33 +07:00
armada-388-gp.dtb \
ARM: mvebu: Add Device Tree description of the Armada 388 SoC This SoC belongs to the Armada 38x family. The main difference with the Armada 385 is that the 388 can handle two more SATA ports. Currently the consequence is the use of a different compatible string for the pinctrl node, in order to be able to use the pins associated to this 2 new SATA ports. The second SATA controller has also been moved from the armada38x.dtsi as it it specific to the Armada388 version. In the same time the Armada385 DB and Armada 385 RD board have been renamed in the 388 one and now include the armada-388.dtsi file. AS both of them have 4 SATA ports the SoC used on them were wrongly described. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09 00:38:13 +07:00
armada-388-rd.dtb
ARM: mvebu: add Device Tree files for Armada 39x SoC and board This commit adds the Device Tree files for the Armada 39x family of processors, as well as one Armada 398 Development Board. Like for other Marvell EBU families, a common armada-39x.dtsi contains the description of the common features of all Armada 39x SoCs, while armada-390.dtsi and armada-398.dtsi respectively describe the specificities of those SoCs. Finally, an armada-398-db.dts file is added to describe the Armada 398 Development Board itself. So far, the following features are supported: * SMP: dual Cortex-A9 * Basic ARM IPs: SCU, timer, GIC, L2 cache * Basic Marvell IPs: pin-muxing, clocks, system controller, MBus controller, MPIC interrupt controller, timer, CPU reset for SMP, PMSU. * I2C * SPI * SDHCI * XOR * NAND * UART * PCIe Additional features will be supported in the future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-03 21:41:12 +07:00
dtb-$(CONFIG_MACH_ARMADA_39X) += \
armada-398-db.dtb
mvebu dt changes for v3.15 (incremental pull #3) - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJTFTyxAAoJEP45WPkGe8ZnDnwP/j1mxhzK7jY6KHJlY79Z/Bjr ZXGcVZIcmzYQMEaEcpT1lMtzQnxRf9xqd8JMr2k33oNe0uzEOp6wiSfIkw7aldkV s2ZGp0PjaVhJZqhgzbH0LJhid73RRBTCUGNrzCYDQt9BWkvJygnP7iFjNHQzijVJ UjpXhxVdVXpx9RTVwgcHs7GtDskrUhiPBlDcJePuk3q8oRwNJA+jDiWxBTALtABd JdvpaNW4RHFR1KAoHTqxhFuS61W+DF3IQalH8PpcYHYV/MXs1QByP1nbEira7Dav HuIgGtiltfObMHN6DrU4uPQFvb0Ab13q5WoZmW4bR9Y01wpM5TgOQxXpLZi/aCbV dr4UmbcUSo9MDCMZvOEIHC+7FW5LutVNt4IwqQN/bJQyK1aZMjJTS4aVxmU+2Vl+ mIaPyh3ePXAtGEg3Ai7iWfbEMANKz2qoqShckxbqEPLsDCeYY4ar9TnUHHSc8Mat LskwGE25ACcaQkf1vFkZNSaezEiB9yai37yGKu83FyYk8Vi/hsLxeb6EBHKULC// 8uU4abC12nw8KAX/sHStjMKa64upoyycczVxhKjwLPmgwSSW47m8ZyE+tzxpNBE3 4oBLB4C9lCouUXrpOxkkRv0uSSeJ/1dW8IhSxFWQuNRi2rl2KJsKzYKIWLEjNbqT YrrarK14xpMewjJduvat =38NX -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper: - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) * tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add dts file describing HP T5325 thin client ARM: kirkwood: Add i2c alias so setting bus number ARM: kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: select dtbs from MACH_ARMADA_* ARM: dove: add global-config register node ARM: dove: add additional pinctrl registers ARM: mvebu: Instantiate system controller in kirkwood.dtsi ARM: kirkwood: Instantiate L2 cache from DT. ARM: mvebu: use macros for interrupt flags on Armada 375/38x ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs ARM: mvebu: use C preprocessor include for Armada 375/38x DTs ARM: Kirkwood: Add support for many Synology NAS devices DT: i2c: Trivial: Add sii,s35390a DT: Vendor prefixes: Add ricoh, qnap, sii and synology ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: add Device Tree for the Armada 385 DB board ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs ARM: mvebu: add Device Tree for the Armada 375 DB board ARM: mvebu: add Device Tree description of the Armada 375 SoC ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:02:46 +07:00
dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
ARM: dts: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards These boards are Marvell's evaluation boards for the 98DX4251 and 98DX3336 SoCs. [gregory.clement@free-electrons.com: fix topic and update Makefile] Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-01-30 06:20:35 +07:00
armada-xp-db-dxbc2.dtb \
armada-xp-db-xc3-24g4xg.dtb \
mvebu dt changes for v3.15 (incremental pull #3) - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJTFTyxAAoJEP45WPkGe8ZnDnwP/j1mxhzK7jY6KHJlY79Z/Bjr ZXGcVZIcmzYQMEaEcpT1lMtzQnxRf9xqd8JMr2k33oNe0uzEOp6wiSfIkw7aldkV s2ZGp0PjaVhJZqhgzbH0LJhid73RRBTCUGNrzCYDQt9BWkvJygnP7iFjNHQzijVJ UjpXhxVdVXpx9RTVwgcHs7GtDskrUhiPBlDcJePuk3q8oRwNJA+jDiWxBTALtABd JdvpaNW4RHFR1KAoHTqxhFuS61W+DF3IQalH8PpcYHYV/MXs1QByP1nbEira7Dav HuIgGtiltfObMHN6DrU4uPQFvb0Ab13q5WoZmW4bR9Y01wpM5TgOQxXpLZi/aCbV dr4UmbcUSo9MDCMZvOEIHC+7FW5LutVNt4IwqQN/bJQyK1aZMjJTS4aVxmU+2Vl+ mIaPyh3ePXAtGEg3Ai7iWfbEMANKz2qoqShckxbqEPLsDCeYY4ar9TnUHHSc8Mat LskwGE25ACcaQkf1vFkZNSaezEiB9yai37yGKu83FyYk8Vi/hsLxeb6EBHKULC// 8uU4abC12nw8KAX/sHStjMKa64upoyycczVxhKjwLPmgwSSW47m8ZyE+tzxpNBE3 4oBLB4C9lCouUXrpOxkkRv0uSSeJ/1dW8IhSxFWQuNRi2rl2KJsKzYKIWLEjNbqT YrrarK14xpMewjJduvat =38NX -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper: - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) * tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add dts file describing HP T5325 thin client ARM: kirkwood: Add i2c alias so setting bus number ARM: kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: select dtbs from MACH_ARMADA_* ARM: dove: add global-config register node ARM: dove: add additional pinctrl registers ARM: mvebu: Instantiate system controller in kirkwood.dtsi ARM: kirkwood: Instantiate L2 cache from DT. ARM: mvebu: use macros for interrupt flags on Armada 375/38x ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs ARM: mvebu: use C preprocessor include for Armada 375/38x DTs ARM: Kirkwood: Add support for many Synology NAS devices DT: i2c: Trivial: Add sii,s35390a DT: Vendor prefixes: Add ricoh, qnap, sii and synology ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: add Device Tree for the Armada 385 DB board ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs ARM: mvebu: add Device Tree for the Armada 375 DB board ARM: mvebu: add Device Tree description of the Armada 375 SoC ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:02:46 +07:00
armada-xp-gp.dtb \
ARM: mvebu: Add dts definition for Lenovo Iomega ix4-300d NAS The Lenovo Iomega ix4-300d is a 4-Bay sata NAS with dual Gb, USB2.0 & 3.0, powered by a Marvell Armada XP MV78230 dual core CPU. http://shop.lenovo.com/us/en/servers/network-storage/lenovoemc/ix4-300d/ Signed-off-by: Benoit Masson <yahoo@perenite.com> Link: https://lkml.kernel.org/r/1406503839-4662-1-git-send-email-yahoo@perenite.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-28 06:30:39 +07:00
armada-xp-lenovo-ix4-300d.dtb \
ARM: mvebu: add Linksys WRT1900AC (Mamba) support The Linksys WRT1900AC (Mamba) is a router that has - 2 mini-PCIe slots with Marvell 88W8864 radios - 1 USB 3.0 port - 1 USB 2.0/eSATAp port - 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN) - 128MB NAND flash - 256MB RAM gregory.clement@free-electrons.com: - add ARM to the title - fix the reference to CONFIG_DEBUG_MVEBU_UART0_ALTERNATE - fix the unbalanced comment for the syscfg partition Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-02-16 19:31:04 +07:00
armada-xp-linksys-mamba.dtb \
mvebu dt changes for v3.15 (incremental pull #3) - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJTFTyxAAoJEP45WPkGe8ZnDnwP/j1mxhzK7jY6KHJlY79Z/Bjr ZXGcVZIcmzYQMEaEcpT1lMtzQnxRf9xqd8JMr2k33oNe0uzEOp6wiSfIkw7aldkV s2ZGp0PjaVhJZqhgzbH0LJhid73RRBTCUGNrzCYDQt9BWkvJygnP7iFjNHQzijVJ UjpXhxVdVXpx9RTVwgcHs7GtDskrUhiPBlDcJePuk3q8oRwNJA+jDiWxBTALtABd JdvpaNW4RHFR1KAoHTqxhFuS61W+DF3IQalH8PpcYHYV/MXs1QByP1nbEira7Dav HuIgGtiltfObMHN6DrU4uPQFvb0Ab13q5WoZmW4bR9Y01wpM5TgOQxXpLZi/aCbV dr4UmbcUSo9MDCMZvOEIHC+7FW5LutVNt4IwqQN/bJQyK1aZMjJTS4aVxmU+2Vl+ mIaPyh3ePXAtGEg3Ai7iWfbEMANKz2qoqShckxbqEPLsDCeYY4ar9TnUHHSc8Mat LskwGE25ACcaQkf1vFkZNSaezEiB9yai37yGKu83FyYk8Vi/hsLxeb6EBHKULC// 8uU4abC12nw8KAX/sHStjMKa64upoyycczVxhKjwLPmgwSSW47m8ZyE+tzxpNBE3 4oBLB4C9lCouUXrpOxkkRv0uSSeJ/1dW8IhSxFWQuNRi2rl2KJsKzYKIWLEjNbqT YrrarK14xpMewjJduvat =38NX -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper: - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) * tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add dts file describing HP T5325 thin client ARM: kirkwood: Add i2c alias so setting bus number ARM: kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: select dtbs from MACH_ARMADA_* ARM: dove: add global-config register node ARM: dove: add additional pinctrl registers ARM: mvebu: Instantiate system controller in kirkwood.dtsi ARM: kirkwood: Instantiate L2 cache from DT. ARM: mvebu: use macros for interrupt flags on Armada 375/38x ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs ARM: mvebu: use C preprocessor include for Armada 375/38x DTs ARM: Kirkwood: Add support for many Synology NAS devices DT: i2c: Trivial: Add sii,s35390a DT: Vendor prefixes: Add ricoh, qnap, sii and synology ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: add Device Tree for the Armada 385 DB board ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs ARM: mvebu: add Device Tree for the Armada 375 DB board ARM: mvebu: add Device Tree description of the Armada 375 SoC ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:02:46 +07:00
armada-xp-matrix.dtb \
ARM: mvebu: Add dts definition for Lenovo Iomega ix4-300d NAS The Lenovo Iomega ix4-300d is a 4-Bay sata NAS with dual Gb, USB2.0 & 3.0, powered by a Marvell Armada XP MV78230 dual core CPU. http://shop.lenovo.com/us/en/servers/network-storage/lenovoemc/ix4-300d/ Signed-off-by: Benoit Masson <yahoo@perenite.com> Link: https://lkml.kernel.org/r/1406503839-4662-1-git-send-email-yahoo@perenite.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-28 06:30:39 +07:00
armada-xp-netgear-rn2120.dtb \
arm: mvebu: add .dts file for Synology DS414 Synology DS414 is a 4-bay NAS powered by a Marvell Armada XP (mv78230 dual-core @1.33Ghz). It is very similar on many aspects to previous 4-bay synology models based on Marvell kirkwood SoC. Here is a short summary of the device: - 1GB RAM - Boot on SPI flash (64Mbit Micron N25Q064) - 2 GbE interfaces (Armada MAC connected to two Marvell 88E1512 PHY via RGMII) - 1 front USB 2.0 ports (directly handled by the Armada 370) - 2 rear USB 3.0 ports (handled by an EtronTech EJ168A XHCI controller on the PCIe bus) - 4 internal SATA ports handled by a Marvell 88SX7042 SATA-II controller on the PCIe bus) - Seiko S-35390A I2C RTC chip - UART0 providing serial console - UART1 used for poweroff (connected to a Microchip PIC16F883) Additional note: the front LEDs the and the two fans are not directly connected to the SoC and under its control. The former are presumably driven by the SATA controller, the latter by the PIC. [ jac: fixed up s/ge[01]_rgmii_pins/pmx_ge[01]_rgmii/ to match armada-xp.dtsi ] Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/5b678d6d1f2f42f4bf0d087878b9d8024d463ea7.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-22 06:46:57 +07:00
armada-xp-openblocks-ax3-4.dtb \
armada-xp-synology-ds414.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_MACH_DOVE) += \
Merge tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental #4)" from Jason Cooper: - dove - add system controller node - drop pinctrl PMU reg property _before_ it hits mainline and becomes ABI - mvebu - XP/370 - change default PCIe apertures - switch GP and DB boards internal registers to 0xf1000000 - correct RAM size on Matrix board - 385 - correct phy connection type for DB board - add RD board * tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu: ARM: dove: drop pinctrl PMU reg property ARM: mvebu: add Device Tree for the Armada 385 RD board ARM: mvebu: use the correct phy connection mode on Armada 385 DB ARM: mvebu: the Armada XP Matrix board has 4 GB ARM: mvebu: switch the Armada XP GP to use internal registers at 0xf1000000 ARM: mvebu: switch the Armada XP DB to use internal registers at 0xf1000000 ARM: mvebu: change the default PCIe apertures for Armada 370/XP ARM: dove: add system controller node Conflicts: arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:07:25 +07:00
dove-cubox.dtb \
ARM: dts: mvebu: split SolidRun CuBox into variants As Mainlining effort for SolidRun CuBox has been carried out on the Engineering Sample, the board DTS was reflecting this. Actually, SolidRun CuBox comes in three different variants: Engineering Sample (ES), production with 1GB RAM (1G), and production with 2GB RAM (2G). Therefore, we base current dove-cubox.dts on to the 1G production variant and add a ES dts to add required quirk for misrouted SDHCI card detect on top of dove-cubox.dts. For the 2G variant we rely on the bootloader to setup correct RAM size. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1401228006-3212-1-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-28 05:00:06 +07:00
dove-cubox-es.dtb \
Merge tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental #4)" from Jason Cooper: - dove - add system controller node - drop pinctrl PMU reg property _before_ it hits mainline and becomes ABI - mvebu - XP/370 - change default PCIe apertures - switch GP and DB boards internal registers to 0xf1000000 - correct RAM size on Matrix board - 385 - correct phy connection type for DB board - add RD board * tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu: ARM: dove: drop pinctrl PMU reg property ARM: mvebu: add Device Tree for the Armada 385 RD board ARM: mvebu: use the correct phy connection mode on Armada 385 DB ARM: mvebu: the Armada XP Matrix board has 4 GB ARM: mvebu: switch the Armada XP GP to use internal registers at 0xf1000000 ARM: mvebu: switch the Armada XP DB to use internal registers at 0xf1000000 ARM: mvebu: change the default PCIe apertures for Armada 370/XP ARM: dove: add system controller node Conflicts: arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:07:25 +07:00
dove-d2plug.dtb \
dove-d3plug.dtb \
ARM: dts: dove: Add Compulab SBC-A510 to Makefile With reworked device tree files for Compulab CM-A510 SoM and SBC-A510 base board, now add the correspoding board file to Makefile again. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-05-05 03:08:50 +07:00
dove-dove-db.dtb \
dove-sbc-a510.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_MEDIATEK) += \
ARM: dts: mediatek: add MT2701 basic support This adds basic chip support for Mediatek 2701. Signed-off-by: Erin Lo <erin.lo@mediatek.com> [matthias.bgg@gmail.com: Fixed reg address of mt2701-timer] Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-10-20 13:34:31 +07:00
mt2701-evb.dtb \
ARM: dts: mediatek: add mt6580 basic support This adds basic chip support for Mediatek 6580. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-07-14 13:07:09 +07:00
mt6580-evbp1.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
mt6589-aquaris5.dtb \
ARM: mediatek: add dts for mt6592-evb The mt6592-evb is an evaluation board based on the MT6592 SoC. Signed-off-by: Howard Chen <ibanezchen@gmail.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-11-14 12:14:53 +07:00
mt6592-evb.dtb \
arm: dts: mt7623: add MT7623A reference boards Add MT7623A reference board with eMMC and NAND, respectively. The both boards compared against MT7623N BPI-R2, we could see there are UART[0-1] and USB2 being removed, I2C2 and SPI1 being added, I2C1, UART2 owning distinct pin usage and an extra WM8960 codec chip plugged into the I2C1 offering the functionality of audio player and recorder through SoC audio front-end engine (AFE). Signed-off-by: Sean Wang <sean.wang@mediatek.com> Suggested-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-04-11 15:54:04 +07:00
mt7623a-rfb-emmc.dtb \
mt7623a-rfb-nand.dtb \
arm: dts: mt7623: add MT7623N reference board with eMMC Add MT7623N reference board with eMMC. On the board, there is additional external PHY ICPlus IP1001 transceiver available by port 5 on the MDIO bus connectted with GMAC2. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Suggested-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-04-11 15:54:05 +07:00
mt7623n-rfb-emmc.dtb \
arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi There are 2 versions of the MT7623 SoC, the one is MT7623N and the other is MT7623A. MT7623N is almost identical to MT7623A but has some additional multimedia features. The reference boards are available as NAND or MMC and might have a different ethernet setup. In order to reduce the duplication of devicetree code we add an intermediate dtsi file for these reference boards. Additionally MediaTek pointed out, that the EVB is yet another board and the board in question is infact the RFB. Take this into account while renaming the files. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 14:36:37 +07:00
mt7623n-rfb-nand.dtb \
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board Add support for the Bananapi R2 (BPI-R2) development board from BIPAI KEJI. Detailed hardware information for BPI-R2 which could be found on http://www.banana-pi.org/r2.html The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP table and thermal zone treating CPU as one of cooling devices and also added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART, SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing hardware and peripherals, they would be added and integrated continuously. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 14:36:42 +07:00
mt7623n-bananapi-bpi-r2.dtb \
ARM: dts: Build dtb for mt8127 & mt8135 This allows the "make dtbs" to build the moose and mt8135-evbp1 for MediaTek SoC Signed-off-by: Joe.C <yingjoe.chen@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-11-04 14:30:53 +07:00
mt8127-moose.dtb \
mt8135-evbp1.dtb
ARM: dts: zx: add an initial zx296702 dts and doc Add initial dts file and document for ZX296702 and board ZX296702-AD1. More peripherals will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-06-04 10:21:02 +07:00
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
ARM: dts: aspeed: Sort ASPEED entries in makefile In preperation for adding more boards. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-11-28 19:57:05 +07:00
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
ARM: dts: aspeed: Add Qualcomm Centriq 2400 REP BMC The Qualcomm Centriq 2400 REP (Reference Evaluation Platform) is an aarch64 Armv8 server platform with an ast2520 BMC. Signed-off-by: Ken Chen <chen.kenyy@inventec.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-02-21 14:17:26 +07:00
aspeed-bmc-arm-centriq2400-rep.dtb \
ARM: dts: aspeed: Add S2600WF BMC Machine S2600WF is a Intel platform family with an ASPEED AST2500 BMC. Signed-off-by: James Feist <james.feist@linux.intel.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-12-12 03:20:34 +07:00
aspeed-bmc-intel-s2600wf.dtb \
ARM: dts: aspeed: Add Inventec Lanyang BMC The Inventec Lanyang is Power 9 platform with ast2500 BMC. Signed-off-by: Brian Yang <yang.brianc.w@inventec.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-04-11 14:42:22 +07:00
aspeed-bmc-opp-lanyang.dtb \
ARM: dts: aspeed: Sort ASPEED entries in makefile In preperation for adding more boards. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-11-28 19:57:05 +07:00
aspeed-bmc-opp-palmetto.dtb \
ARM: dts: aspeed: Add Romulus BMC platform Romulus is an OpenPower machine with an ast2500 BMC. It has NCSI networking and 512MB of RAM. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-04 13:01:28 +07:00
aspeed-bmc-opp-romulus.dtb \
ARM: dts: aspeed: Add Ingrasys Zaius BMC machine Zaius is a POWER9 platform announced at OpenPOWER Summit 2016. This adds basic DTS support for its AST2500 BMC. This adds the device tree description for most upstream components. It is a squashed commit of all of the patches from the OpenBMC kernel tree. Signed-off-by: Xo Wang <xow@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Robert Lippert <rlippert@google.com> Signed-off-by: Peter Hanson <peterh@google.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Rick Altherr <raltherr@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-11-28 19:41:05 +07:00
aspeed-bmc-opp-witherspoon.dtb \
ARM: dts: aspeed: Add Qanta Q71L BMC machine The Qanta Q71L BMC is an ASPEED ast2400 based BMC that is part of a Qanta x86 server. This adds the device tree description for most upstream components. It is a squashed commit from the OpenBMC kernel tree. Signed-off-by: Peter Hanson <peterh@google.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Rick Altherr <raltherr@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-11-28 19:41:05 +07:00
aspeed-bmc-opp-zaius.dtb \
ARM: dts: aspeed: Add Portwell Neptune machine Initial introduction of Portwell Neptune family equipped with Aspeed 2500 BMC SoC. Neptune is a x86 server development kit with a ASPEED ast2500 BMC manufactured by Portwell. Specifically, This adds the neptune platform device tree file including the flash layout used by the neptune machines. Signed-off-by: Amithash Prasad <amithash@fb.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-03-27 07:11:49 +07:00
aspeed-bmc-portwell-neptune.dtb \
ARM: dts: aspeed: Add Qanta Q71L BMC machine The Qanta Q71L BMC is an ASPEED ast2400 based BMC that is part of a Qanta x86 server. This adds the device tree description for most upstream components. It is a squashed commit from the OpenBMC kernel tree. Signed-off-by: Peter Hanson <peterh@google.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Rick Altherr <raltherr@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-11-28 19:41:05 +07:00
aspeed-bmc-quanta-q71l.dtb
Reference in New Issue Copy Permalink