AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-26 16:30:55 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
b02f46b9e0
linux_dsm_epyc7002/arch/arm/boot/dts/Makefile

724 lines
18 KiB
Makefile
Raw Normal View History

ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
ifeq ($(CONFIG_OF),y)
ARM: dts: Alpine platform devicetree This patch introduces devicetree for the Alpine platform, and for a development board based on the same platform. Signed-off-by: Barak Wasserstrom <barak@annapurnalabs.com> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-12 18:53:12 +07:00
dtb-$(CONFIG_ARCH_ALPINE) += \
ARM: dts: fix typo in makefile for alpine-db File uses dash in the filename, not underscore. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-02 07:05:54 +07:00
alpine-db.dtb
ARM: dts: move alphascale in makefile The file is roughly sorted alphabetically (with some exceptions where old options have been split in two), so alphascale should go at the top instead of at the bottom. Also linewrap like other entries have been lately. Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-20 07:32:42 +07:00
dtb-$(CONFIG_MACH_ASM9260) += \
alphascale-asm9260-devkit.dtb
arm: at91: dt: at91sam9 add serial pinctrl support Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-07-05 15:56:09 +07:00
# Keep at91 dtb files sorted alphabetically for each SoC
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
dtb-$(CONFIG_SOC_SAM_V4_V5) += \
at91rm9200ek.dtb \
mpa1600.dtb \
animeo_ip.dtb \
at91-qil_a9260.dtb \
aks-cdu.dtb \
ethernut5.dtb \
evk-pro3.dtb \
tny_a9260.dtb \
usb_a9260.dtb \
at91sam9261ek.dtb \
at91sam9263ek.dtb \
tny_a9263.dtb \
usb_a9263.dtb \
at91-foxg20.dtb \
ARM: at91/dt: kizbox: rename to at91-kizbox Rename to match AT91 naming convention. Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-30 14:33:32 +07:00
at91-kizbox.dtb \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
at91sam9g20ek.dtb \
at91sam9g20ek_2mmc.dtb \
tny_a9g20.dtb \
usb_a9g20.dtb \
usb_a9g20_lpw.dtb \
at91sam9m10g45ek.dtb \
pm9g45.dtb \
at91sam9n12ek.dtb \
at91sam9rlek.dtb \
at91-ariag25.dtb \
ARM: at91/dt: Add Acme Arietta G25 Add a minimum Device Tree for Acme Arietta G25. http://acme.systems/arietta Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Sergio Tanzilli <tanzilli@acmesystems.it> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-06-03 19:24:18 +07:00
at91-ariettag25.dtb \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
at91-cosino_mega2560.dtb \
ARM: at91/dt: add support for kizboxmini Add DT file for Kizbox mini board. This board is based on Atmel's AT91SAM9G25 SoC. Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-05-04 22:59:07 +07:00
at91-kizboxmini.dtb \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
at91sam9g15ek.dtb \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
ARM: at91/dt: add support for kizbox2 Add DT file for Kizbox 2 board. This board is based on Atmel's SAMA5D31 Cortex-A5 SoC. Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-05-04 22:59:57 +07:00
at91-kizbox2.dtb \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
at91-sama5d3_xplained.dtb \
sama5d31ek.dtb \
sama5d33ek.dtb \
sama5d34ek.dtb \
sama5d35ek.dtb \
sama5d36ek.dtb \
ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board Add at91 sama5d4 xplained board support. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 09:51:48 +07:00
at91-sama5d4_xplained.dtb \
ARM: dts: re-fromat AT91 part to match other entries The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13 21:43:00 +07:00
at91-sama5d4ek.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_ATLAS6) += \
atlas6-evb.dtb
drop Marco and add init dts stuff for Atlas7 CSR Marco SoC has never shipped to customers that could be interested in mainline support. and new Atlas7 is a replacement SoC that is in development. so we drop Marco dts stuff, and add dts stuff for Atlas7. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJUtmPZAAoJEDIv4aC191Rh3ZEQAI0kUJqgUAK8te3zHnQ0rUBp zawNk6N5D6KIFEue3hNDE6XlBhhKz8o5Npr7Wlp3WDRlA9gvSn0BYd5iQhRQjg3F hXRLPpK47pUPlq0RMLFNiYO4EwNQlA6ANBDe1sAUDWPiDplfkF0w5WXW8ZvPk3FL YXbumzH6JOrCzyMijOXKfJEtN/8qkgbm8mEQxwiuwLzzfmsuryOTbJbSvv8ogP4K hZEnfAP6MfR9Kk87a1XKMgs3DMuaWou6RXh6Vah4z0OlvtWLOmAy/j0tXs0Qe8Eh Kcms+zHHrmT9QyT82x/FK3ZCj0Q+HuI9mf3Gf54DKfYh9zMhjZH/y3ORFxHMiQFi ycSVO/LuLEB9J2X/3UDmnsl2YVds7v9Bf+8ZkMTprA1MKEpxWnZDIEH7cX5e192+ pgVBh7N9dbeLxgH6i6VtRXSRtjNqE+893o4qKYGagvzJhQ0XO5Dk1Em+LrkJIQeh pdpmgpKCWfT5RPJLpdUC93TUvpex+LlcCC5Obk107aEjGDeZCqJDYMl6J3YQdVIC 2oY5+hAmq5rxQ3D4KrXoSLmFr9pXQSNEav18dM00LZMnpoQlC/2EiuIsCv/b45EF w31fW0CM0C8kXDabkQjZOTcItz+nkJCb1KLvhm20Zcir2g9zM9iqW8QVcg6BYm10 KC+gpZpQvAszle4KW+v0 =wbyB -----END PGP SIGNATURE----- Merge tag 'atlas7-init-dts-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/dt Merge "CSR atlas7 init dts for 3.20" from Barry Song: Drop Marco and add init dts stuff for Atlas7 CSR Marco SoC has never shipped to customers that could be interested in mainline support. and new Atlas7 is a replacement SoC that is in development. So we drop Marco dts stuff, and add dts stuff for Atlas7. * tag 'atlas7-init-dts-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: ARM: dts: add init dts file for CSR atlas7 SoC ARM: dts: drop MARCO platform DT stuff Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-20 01:57:35 +07:00
dtb-$(CONFIG_ARCH_ATLAS7) += \
atlas7-evb.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_AXXIA) += \
axm5516-amarillo.dtb
dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-b.dtb \
bcm2835-rpi-b-plus.dtb
ARM: BCM5301X: Add DT for Netgear R6300 V2 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2014-12-04 16:22:02 +07:00
dtb-$(CONFIG_ARCH_BCM_5301X) += \
ARM: BCM5301X: Add DT for Asus RT-AC56U Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-31 22:29:18 +07:00
bcm4708-asus-rt-ac56u.dtb \
ARM: BCM5301X: Add DT for Asus RT-AC68U Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-28 21:01:38 +07:00
bcm4708-asus-rt-ac68u.dtb \
ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2014-12-04 16:22:58 +07:00
bcm4708-buffalo-wzr-1750dhp.dtb \
ARM: BCM5301X: Add DT for Luxul XWC-1000 Luxul XWC-1000 is a controller device based on BCM4708 SoC. The only unusual thing in its DTS file is "ubi" partition on NAND flash. Signed-off-by: Dan Haab <dhaab@luxul.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2015-01-20 02:45:37 +07:00
bcm4708-luxul-xwc-1000.dtb \
ARM: BCM5301X: Add DT for Netgear R6300 V2 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2014-12-04 16:22:02 +07:00
bcm4708-netgear-r6250.dtb \
ARM: BCM5301X: Add DT for Asus RT-N18U Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2014-12-04 16:23:33 +07:00
bcm4708-netgear-r6300-v2.dtb \
ARM: BCM5301X: Add DT for SmartRG SR400ac Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-05-13 14:10:53 +07:00
bcm4708-smartrg-sr400ac.dtb \
ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2014-12-04 16:24:02 +07:00
bcm47081-asus-rt-n18u.dtb \
ARM: BCM5301X: Add DT for Buffalo WZR-900DHP Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2015-01-21 04:42:16 +07:00
bcm47081-buffalo-wzr-600dhp2.dtb \
ARM: BCM5301X: Add DT for Netgear R8000 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reported-by: Ian Kent <raven@themaw.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-02-18 18:25:42 +07:00
bcm47081-buffalo-wzr-900dhp.dtb \
ARM: BCM5301X: Add DT for Asus RT-AC87U Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-05-16 21:55:39 +07:00
bcm4709-asus-rt-ac87u.dtb \
ARM: BCM5301X: Add DT for Buffalo WXR-1900DHP Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-05-13 14:10:52 +07:00
bcm4709-buffalo-wxr-1900dhp.dtb \
ARM: BCM5301X: Add DT for Netgear R8000 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reported-by: Ian Kent <raven@themaw.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-02-18 18:25:42 +07:00
bcm4709-netgear-r8000.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
bcm911360_entphn.dtb \
ARM: dts: Enable Broadcom Cygnus SoC DT files to enable cygnus consisting on reference designs and cygnus core configuration. Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Arun Parameswaran <aparames@broadcom.com> Tested-by: Jonathan Richardson <jonathar@broadcom.com> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2014-10-15 06:42:25 +07:00
bcm911360k.dtb \
ARM: dts: Enable Broadcom Cygnus BCM958305K DT file to enable the Wireless Audio reference design based on the BCM58305. Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Tested-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Jonathan Richardson <jonathar@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-03 05:41:10 +07:00
bcm958300k.dtb \
bcm958305k.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
bcm28155-ap.dtb \
ARM: dts: bcm21664: Add device tree files. Add device tree files for the Broadcom BCM21664 SoC. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-03-06 16:18:14 +07:00
bcm21664-garnet.dtb
ARM: add Armada 1500 and Sony NSZ-GS7 device tree files This adds very basic device tree files for the Marvell Armada 1500 SoC (Berlin BG2) and the Sony NSZ-GS7 GoogleTV board. Currently, SoC only has nodes for cpus, some clocks, l2 cache controller, local timer, apb timers, uart, and interrupt controllers. The Sony NSZ-GS7 is a GoogleTV consumer device comprising the Armada 1500 SoC above. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jisheng Zhang <jszhang@marvell.com>
2013-09-09 19:17:52 +07:00
dtb-$(CONFIG_ARCH_BERLIN) += \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
berlin2-sony-nsz-gs7.dtb \
berlin2cd-google-chromecast.dtb \
ARM: dts: berlin: add the Marvell BG2-Q DMP device tree Adds initial support for the Marvell BG2-Q DMP. The board has 2GB of memory, an uart activated and what's initially supported by the Marvell Armada 1500 pro dtsi. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-03-18 21:32:47 +07:00
berlin2q-marvell-dmp.dtb
ARM: brcmstb: dts: add a reference DTS for Broadcom 7445 Add a sample DTS which will allow bootup of a board populated with the BCM7445 chip. Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Matt Porter <mporter@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-26 16:27:21 +07:00
dtb-$(CONFIG_ARCH_BRCMSTB) += \
bcm7445-bcm97445svmb.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_DAVINCI) += \
da850-enbw-cmc.dtb \
ARM: davinci: move dtb targets to common location The dtb targets belong in arch/arm/boot/dts/Makefile now, so move the newly added davinci targets there. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20 13:25:59 +07:00
da850-evm.dtb
ARM: digicolor: add minimal device tree description cx92755.dtsi describes CX92755 on chip peripherals. cx92755_equinox.dts describes the Equinox evaluation board for the CX92755 SoC. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-29 05:04:10 +07:00
dtb-$(CONFIG_ARCH_DIGICOLOR) += \
cx92755_equinox.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_EFM32) += \
efm32gg-dk3750.dtb
dtb-$(CONFIG_ARCH_EXYNOS3) += \
exynos3250-monk.dtb \
exynos3250-rinato.dtb
dtb-$(CONFIG_ARCH_EXYNOS4) += \
ARM: dts: Add board dts file for exynos3250-rinato This patch adds support for device tree source for Samsung Rinato board (Gear 2) based on Exynos3250 SoC. This dts file support following features: - eMMC - Main PMIC (Samsung S2MPS14) - Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger) - RTC of Exynos3250 - ADC of Exynos3250 with NTC thermistor - I2S of Exynos3250 - TMU of Exynos3250 - MFC of Exynos3250 - Secure firmware for Exynos3250 secondary cpu boot - Serial ports of Exynos3250 - gpio-key for power key Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-07 06:10:12 +07:00
exynos4210-origen.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
exynos4210-smdkv310.dtb \
ARM: soc: multiplatform enablement This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQaO7aAAoJEIwa5zzehBx3bUIP/02U8PhkHJJrrowyIsWRBOql 7LPJ53PRRgrpBdmEGzFD3TO3zaNyrjQRbYgNDvzHMO6NAMNvdRFouuWYjO11/tuB i32zssXCC+eUOEgbAo/U/lYq+UOvqw9gv6mU+3+i3OcGEhdKOaoT/DSLPQC4hoDm 222TeLfFB3HJXu5n720dEQ9V3fO6TS1+bbh8TU3cjHqzceXsOrffZqOA5CQxUcRr KWwOjA0nALDwWcqgv45GJNwY3GTyAQ/hPMQavnuWK0voJ+qUYk5HftKocAK7C+py 0T0OFOAHTwtyhvzJBxLC84M6Ox465BYXyeNjIB+2nG/Um9+mDoP0dnWpGy4c7DMU P5hyqbeLGeqjUXQuYtRmgMMc3UeHKoUGAfXW9eMsjLa6/M4NLGv//7E7LbZPpgMZ obkjwuesmcaYn/FRyj/yFmC35YlF4oCLziVzEtURZw3eKHHSUlhkTDSMNnkcZ0kZ Vv7kFxnD2Y46ixiwSJv30ErQnVkgI3MdqDlDxkE8r5+phYuK4gCrNaJtiwRh/oNw cFhpPxKuA0sJ9b6YRTzjC45eT/XZomEEr/uifCFeRNaCquyjYP00Mm8F0flSqwx9 zi+emzPAwNmk1bvxMUM/idGnaj0V4p+BAYUAvkbSoqU1p1flzyhU88fGTSIyKOt6 K5TCDS2v5hrVykK9TDwl =Tc6y -----END PGP SIGNATURE----- Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-02 09:11:38 +07:00
exynos4210-trats.dtb \
ARM: dts: exynos4210: Add basic dts file for universal_c210 board This patch adds basic device tree sources for Universal C210 board. Currently support includes: - eMMC - serial - max8952 and max8998 voltage regulators. - gpio-keys More support will be added in further patches. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-23 22:46:34 +07:00
exynos4210-universal_c210.dtb \
ARM: dts: refactor Odroid DTS file and add support for Odroid X2 and U2/U3 This patch moves some parts of exynos4412-odroidx.dts to common exynos4412-odroid-common.dtsi file and adds support for Odroid X2 and U2/U3 boards. X2 is same as X, but it has faster SoC module (1.7GHz instead of 1.4GHz), while U2/U3 differs from X2 by different way of routing signals to host USB hub. It also lacks some hw modules not yet supported by those dts files (i.e. LCD & touch panel). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-16 00:54:07 +07:00
exynos4412-odroidu3.dtb \
ARM: dts: Add board dts file for ODROID-X Add initial DT for Hardkernel's ODROID-X board based on EXYNOS4412 SoC. This patch including adds the node to support fixed voltage for peripherals like LED, ethernet controller, and this patch adds GPIO connected LEDS on ODROID-X board and configure its properties like following: LED1: use 'heartbeat' trigger, blinking while the board is running. LED2: use 'mmc0' trigger, on when mmc0 is accessing. And adds the device node to support eMMC storage on SDCARD4 ports, controlled by MSHC. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Acked-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: squashed into one commit as per Olof's comment] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-11 08:12:50 +07:00
exynos4412-odroidx.dtb \
ARM: dts: refactor Odroid DTS file and add support for Odroid X2 and U2/U3 This patch moves some parts of exynos4412-odroidx.dts to common exynos4412-odroid-common.dtsi file and adds support for Odroid X2 and U2/U3 boards. X2 is same as X, but it has faster SoC module (1.7GHz instead of 1.4GHz), while U2/U3 differs from X2 by different way of routing signals to host USB hub. It also lacks some hw modules not yet supported by those dts files (i.e. LCD & touch panel). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-16 00:54:07 +07:00
exynos4412-odroidx2.dtb \
ARM: dts: add board dts file for EXYNOS4412 based Origen board Add a minimal board dts file for EXYNOS4412 based Insignal Origen board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-01 06:07:39 +07:00
exynos4412-origen.dtb \
ARM: dts: re-ordering exynos dtbs in Makefile Re-ordering in alphabetical. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24 11:33:46 +07:00
exynos4412-smdk4412.dtb \
ARM: dts: add support for EXYNOS4412 based TINY4412 board Add a minimal board dts file for EXYNOS4412 based FriendlyARM's TINY4412 board. This patch including support peripherals like UART, SD card on SDMMC2 port and GPIO connected LEDs. Signed-off-by: Alex Ling <kasimling@gmail.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-19 03:34:26 +07:00
exynos4412-tiny4412.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
exynos4412-trats2.dtb
dtb-$(CONFIG_ARCH_EXYNOS5) += \
ARM: dts: Add initial board support file for exynos5250-arndale Arndale is a low cost board based on the Samsung Exynos5250 SoC. This patch adds initial device tree support for this board. Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Girish K S <ks.giri@samsung.com> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-02-05 07:15:56 +07:00
exynos5250-arndale.dtb \
ARM: dts: Add board dts file for Snow board (ARM Chromebook) This dts file is based on the Snow dts file in the Chromium OS kernel tree with the following changes: * Some details have been updated to match the exynos5250-smdk5250.dts file from linux-next (as of c11068538994430547722dc9fb515a0ceefd5cb9). * This file doesn't include references to hardware whose upstream support isn't quite there yet. That includes most i2c devices. Note that most i2c busses have been included with no devices. The Snow dts file is mostly just an include of the "cros5250" dts file which describes a class of similar boards. Support for other boards has not yet been send upstream. With this file and a change to use UART3 for serial output I can: * Boot to a command line using either SD or EMMC as a root filesystem * See the power button and lid switch using evtest. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-21 11:32:21 +07:00
exynos5250-smdk5250.dtb \
ARM: dts: fix duplicated build target and alphabetical sort out for exynos Commit db5b0ae00712 ("Merge tag 'dt' of git://git.kernel.org/.../arm-soc") causes a duplicated build target. This patch fixes it and sorts out the build target alphabetically so that we can recognize something wrong easily. Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-22 01:02:13 +07:00
exynos5250-snow.dtb \
ARM: dts: Add exynos5250-spring device tree Adds initial support for the HP Chromebook 11. Cc: Vincent Palatin <vpalatin@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Cc: Stephan van Schaik <stephan@synkhronix.com> Signed-off-by: Andreas Faerber <afaerber@suse.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-23 22:02:14 +07:00
exynos5250-spring.dtb \
ARM: dts: add dts file for exynos5260-xyref5260 board The patch adds the dts file for xyref5260 board which is based on exynos5260 SoC. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-09 04:26:44 +07:00
exynos5260-xyref5260.dtb \
ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410 Add initial device tree nodes for EXYNOS5410 SoC and SMDK5410 board. Signed-off-by: Tarek Dakhran <t.dakhran@samsung.com> Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-27 04:54:13 +07:00
exynos5410-smdk5410.dtb \
ARM: dts: Add initial support for Arndale Octa board Arndale Octa board is based on Exynos5420 SoC. This patch adds the basic support required for booting it through DT. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-12 05:32:39 +07:00
exynos5420-arndale-octa.dtb \
ARM: dts: Add exynos5420 peach-pit board support Adds the google peach-pit board dts file which uses exynos5420 SoC. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-09 04:06:25 +07:00
exynos5420-peach-pit.dtb \
ARM: dts: Add initial device tree support for EXYNOS5420 Add initial device tree nodes for EXYNOS5420 SoC and SMDK5420 board. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-18 22:29:35 +07:00
exynos5420-smdk5420.dtb \
ARM: dts: Add dts file for Odroid XU3 board Add DTS for the Hardkernel Odroid XU3. The name of the DTS file is kept the same as the vendors naming, which means it's prefixed with exynos5422 instead of exynos5800 as the SoC name even though it includes the exyno5800 dtsi. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-12 15:35:49 +07:00
exynos5422-odroidxu3.dtb \
ARM: dts: Add Odroid XU3 Lite support The Odroid XU3 Lite is almost the same as XU3, except: 1. Lower CPU frequencies (1.8 GHz for A15 and 1.3 GHz for A7, instead of 2.0 GHz and 1.4 GHz). 2. No DisplayPort. 3. No TI INA231 energy measurement sensors. This patch moves common nodes (which is almost everything) to a common DTSI file and adds a new XU3 Lite DTS. Currently in comparison to XU3, only the INA231 sensors are disabled to remove the warning: ina2xx 0-0040: error configuring the device: -6 Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-25 19:13:17 +07:00
exynos5422-odroidxu3-lite.dtb \
ARM: dts: re-ordering exynos dtbs in Makefile Re-ordering in alphabetical. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24 11:33:46 +07:00
exynos5440-sd5v1.dtb \
ARM: dts: add dts file for exynos5800-peach-pi board Adds support for google peach-pi board having the Exynos5800 SoC. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-12 05:56:34 +07:00
exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_HI3xxx) += \
hi3620-hi4511.dtb
dtb-$(CONFIG_ARCH_HIX5HD2) += \
hisi-x5hd2-dkb.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += \
highbank.dtb \
ARM: dts: Add Calxeda ECX-2000 support Separate out common dts pieces from highbank dts and add support for Calxeda ECX-2000 (Midway) SOC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25 23:59:09 +07:00
ecx-2000.dtb
ARM: dts: Add hip01-ca9x2 dts file Add dts file for Hisilicon hip01 ca9x2 board Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> [olof: Folded in smp enable-method from a different patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-24 10:09:58 +07:00
dtb-$(CONFIG_ARCH_HIP01) += \
hip01-ca9x2.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_HIP04) += \
hip04-d01.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += \
integratorap.dtb \
ARM: dts: compile Integrator device trees This makes sure that the ARM Integrator device trees get compiled during build. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-13 03:22:59 +07:00
integratorcp.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_KEYSTONE) += \
k2hk-evm.dtb \
ARM: dts: Build all keystone dt blobs Now we have additional two SOC/boards supported, so add make file rule so that all device tree blobs can be build for keystone with 'make dtbs'. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-03-19 03:02:34 +07:00
k2l-evm.dtb \
k2e-evm.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-b3.dtb \
Kirkwood: add support for Seagate BlackArmor NAS220 This patch adds support for Seagate BlackArmor NAS220. The Seagate BlackArmor NAS 220 is a NAS system based on Marvell 88f6192. It has 32MB NAND and 128MB DRAM. It has two SATA slots, one Gigabit Ethernet port, two USB 2.0 ports, two buttons and three LEDs. There is a serial port available on the CN5 connector on the board (1 - TX, 4 - RX, 6 - GND). The only functionality still not implemented is the bi-color led on the front panel (status). Pins mpp22 and mpp23 control this led. Setting mpp22 to high and mpp23 to low results in orange color. Setting mpp22 to low and mpp23 to high results in blue color. The third led is wired to show the SATA activity on the two drives. Signed-off-by: Evgeni Dobrev <evgeni@studio-punkt.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2014-12-28 17:46:54 +07:00
kirkwood-blackarmor-nas220.dtb \
ARM: mvebu: Move kirkwood DT boards into mach-mvebu Move the kirkwood DT support into mach-mvebu, and make them part of ARCH_MULTI_V5. Minimal changes have been made in order to make it boot. Cleanup of the header files and integration with mvebu will take place in following patches. In order to help Debian transition between mach-kirkwood and mach-mvebu, the DTS files are compiled for both, allowing Debian to continue using mach-kirkwood until all remaining boards are supported by mach-mvebu. Debian is then expected to simply swap from mach-kirkwood to mach-mvebu and mach-kirkwood will be removed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-23 02:14:57 +07:00
kirkwood-cloudbox.dtb \
ARM: Kirkwood: add DT support for d2 Network v2 This patch adds DT support for the LaCie NAS d2 Network v2 (d2net_v2). Most of the hardware characteristics are shared with the 2Big and 5Big Network v2 boards. - CPU: Marvell 88F6281 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - 2 SATA ports: internal and eSATA - Gigabit ethernet: PHY Marvell 88E1116R - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 power switch - 1 SATA LED (bi-color, blue and red) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1404830545-15581-3-git-send-email-simon.guinot@sequanux.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-08 21:42:25 +07:00
kirkwood-d2net.dtb \
arm: kirkwood: convert db-88f6281/db-88f6282 to the Device Tree This commit converts the Marvell DB-88F6281/DB-88F6282 board to the Device Tree. In fact, the code was supporting two different boards: one with the 6281 SoC variant, and one with the 6282 SoC variant. The difference between the two being that the 6281 has one PCIe interface, and the 6282 has two PCIe interfaces. In order to handle that with the Device Tree, we create a 'kirkwood-db.dtsi' file that contains the definitions common to both boards, and 'kirkwood-db-88f6281.dts' and 'kirkwood-db-88f6282.dts' for the definitions specific to each board. This is similar to what is done for the QNAP TS219 Kirkwood platform. We have kept one single Kconfig option, just like it was before. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-15 20:37:01 +07:00
kirkwood-db-88f6281.dtb \
kirkwood-db-88f6282.dtb \
ARM: Kirkwood: Add support for DLink DIR665 Add a device tree description of the DLINK DIR665 wireless access point. The support for the 88E6171 switch will be added in a later patch. Signed-off-by: Claudio Leite <leitec@staticky.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1414793613-11798-2-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-01 05:13:30 +07:00
kirkwood-dir665.dtb \
ARM: Kirkwood: DT board setup for CloudBox This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox is a low cost NAS based on the Network Space v2. Chipset list: - CPU MARVELL 88F6702 1Ghz - SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - SPI flash, NOR 512KB - 1 push button - 2 LEDs (red and blue) There is no EEPROM and no USB ports embedded. Note that this board must not be confused with the Network Space Mini v2 which is embedded in a previous LaCie product also named CloudBox. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 05:41:28 +07:00
kirkwood-dns320.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
kirkwood-dns325.dtb \
ARM: kirkwood: move new dtbs to common Makefile This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-23 03:53:12 +07:00
kirkwood-dockstar.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
kirkwood-dreamplug.dtb \
ARM: Kirkwood: Add support for many Synology NAS devices Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <andrew@lunn.ch> translation of the board setup file maintained by Ben Peddell <klightspeed@killerwolves.net> The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC. Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43. Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply. Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Tested-by: Ben Peddell <klightspeed@killerwolves.net> (ds211j) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-20 03:02:37 +07:00
kirkwood-ds109.dtb \
kirkwood-ds110jv10.dtb \
kirkwood-ds111.dtb \
kirkwood-ds209.dtb \
kirkwood-ds210.dtb \
kirkwood-ds212.dtb \
kirkwood-ds212j.dtb \
kirkwood-ds409.dtb \
kirkwood-ds409slim.dtb \
kirkwood-ds411.dtb \
kirkwood-ds411j.dtb \
kirkwood-ds411slim.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
kirkwood-goflexnet.dtb \
ARM: kirkwood: convert Guruplug Server Plus to use the device tree Add a device tree entry for the Guruplug Server Plus board. This port was based both on the work done on the dreamplug and the dockstar. It builds, boots and works on my Guruplug Server Plus. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-12-10 01:40:04 +07:00
kirkwood-guruplug-server-plus.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
kirkwood-ib62x0.dtb \
kirkwood-iconnect.dtb \
ARM: kirkwood: move new dtbs to common Makefile This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-23 03:53:12 +07:00
kirkwood-iomega_ix2_200.dtb \
ARM: kirkwood: DT board setup for Network Space v2 and parents This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:09:04 +07:00
kirkwood-is2.dtb \
ARM: kirkwood: move new dtbs to common Makefile This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-23 03:53:12 +07:00
kirkwood-km_kirkwood.dtb \
ARM: Kirkwood: DT board setup for LaPlug This patch adds DT board setup for the LaCie NAS LaPlug. Chipset list: - CPU MARVELL 88FR131 800Mhz - SDRAM memory: 128MB DDR2-800 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - 1 Mini PCI-Express port - 1 NAND 512 MB - 1 push button - 2 LEDs (red and blue) - 4 USB Ports Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-12-24 19:53:19 +07:00
kirkwood-laplug.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
ARM: kirkwood: Add support for the MPL CEC4 Signed-off-by: Stefan Peter <s.peter@mpl.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-18 22:46:16 +07:00
kirkwood-mplcec4.dtb \
ARM: kirkwood: convert the mv88f6281gtw_ge board to DT This commit converts the mv88f6281gtw_ge Kirkwood board to use a Device Tree representation, except for the Ethernet devices and the DSA switch. Even though the mv643xx_eth driver has a DT binding, converting this board to use it is for now left on the side because it doesn't use a simple PHY, but a DSA switch instead. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-01 22:07:32 +07:00
kirkwood-mv88f6281gtw-ge.dtb \
ARM: Kirkwood: add DT description for nas2big This patch adds the DT description for the LaCie "2Big NAS" (nas2big). This NAS is an hardware upgrade of the 2Big Network v2. Chipset and device list: - CPU Marvell 88F6282 1600Mhz - SDRAM memory, 256MB DDR3 (2x128MB x8) 533Mhz - 1 Ethernet Gigabit port (PHY Marvell 88E1518) - Flash memory, NAND 256MB TSOP48 - I2C EEPROM, 512 bytes (AT24 type) - PCIe SATA controller JMicron JMB360 (eSATA) - I2C fan controller GMT G762 (with a separate alarm GPIO) - 1 USB2 host port - 1 push button - 1 power switch - 2 SATA LEDs (bi-color, blue and red) - 1 power LED (bi-color, blue and red) - CPLD for LEDs and start-up management (Altera Max EMP3064) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-02 03:51:40 +07:00
kirkwood-nas2big.dtb \
ARM: Kirkwood: Add DT descriptions for net2big and net5big. Describe LaCie 2Big and 5Big Network v2 using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1401132591-26305-3-git-send-email-andrew@lunn.ch Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-27 02:29:49 +07:00
kirkwood-net2big.dtb \
kirkwood-net5big.dtb \
ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT Add support for NETGEAR ReadyNAS Duo v2 (Hardware specs available here: http://natisbad.org/NAS/). Almost everything is supported via provided .dts. A board-readynas.c file is nonetheless required for device not only converted to DT (Gbit controller). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Tested-By: Arnaud Ebalard <arno@natisbad.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-20 05:28:06 +07:00
kirkwood-netgear_readynas_duo_v2.dtb \
ARM: kirkwood: Add support for NETGEAR ReadyNAS NV+ v2 Almost all hardware parts of the NETGEAR ReadyNAS NV+ v2 ([1] for more details) are supported by mainline kernel. The only missing elements in provided .dts file are: - the front LCD module (Winstar WINSTAR WH1602): driver development is ongoing. This is the same LCD module as on ReadyNAS 104. - the Macronix MX25L512 512Kbit SPI flash: no time to play with it yet. The device is the big brother (4 vs 2 bay) of the ReadyNAS Duo v2. The main differences are some additional LEDs for the disks, a Marvell 88SM4140 SATA Port multiplier (no driver required to access the disk) and previously described LCD module. Otherwise, it shares the same SoC (kirkwood 88F6282), RAM (256MB), NAND (128MB), RTC chip (Ricoh rs5c372a), fan controller (GMT G762), XHCI controller (NEC/Renesas µPD720200). [1]: http://natisbad.org/NAS5/ Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-30 22:13:44 +07:00
kirkwood-netgear_readynas_nv+_v2.dtb \
ARM: kirkwood: DT board setup for Network Space v2 and parents This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:09:04 +07:00
kirkwood-ns2.dtb \
ARM: kirkwood: DT board setup for Network Space Lite v2 This patch adds DT board setup for the LaCie NAS Network Space Lite v2. This board is derived from the Network Space v2 and a lot of hardware characteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Note that the SATA LED is not compatible with the driver leds-ns2. The LED behaviour ("on", "off" or "SATA activity blink") is controlled via a single MPP (21). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:09:05 +07:00
kirkwood-ns2lite.dtb \
ARM: kirkwood: DT board setup for Network Space v2 and parents This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:09:04 +07:00
kirkwood-ns2max.dtb \
ARM: kirkwood: DT board setup for Network Space Mini v2 This patch adds DT board setup for the LaCie NAS Network Space Mini v2 (aka SafeBox). The hardware characteristics are very close to those of the Network Space Lite v2. The main difference are: - A GPIO fan which is only available on the NS2 Mini. - A single USB host port is wired on the NS2 Mini. The NS2 Lite provides an additional dual-mode USB port (host/device). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:09:06 +07:00
kirkwood-ns2mini.dtb \
arm: kirkwood: add support for ZyXEL NSA310 Hello, Andrew > > +#define NSA310_GPIO_LED_ESATA_GREEN 12 > > <..> > > +#define NSA310_GPIO_POWER_OFF 48 > > It looks like most of these are not used. Please remove them. True. Fixed. > > +static struct mtd_partition nsa310_mtd_parts[] = { > > + { > > + .name = "uboot", > > + .offset = 0, > > + .size = 0x100000, > > + .mask_flags = MTD_WRITEABLE, > > + }, { > > <..> > You should be able to put all that into DT. Take a look at Correct. I did the conversion and tested that the partitions can be read with dd and produce exactly the same data before and after conversion. So, the partition offsets at least should be fine. > > +static struct i2c_board_info __initdata nsa310_i2c_info[] = { > > + { I2C_BOARD_INFO("adt7476", 0x2e) }, > > +}; > > You can also do this in DT as well. kirkwood-ts219.dtsi has > > i2c@11000 { > status = "okay"; > clock-frequency = <400000>; Ok, I did convert the i2c definition to use the devicetree. The adt7476 device itself is not at reach of device tree, AFAIK and requires more work at there? Thanks for your valuable comments. Following is a new patch that should address the problems and mistakes you pointed and also some of the pointed by Jason Cooper. The nand and i2c are now defined at DT and I also removed the pointless defines and ARM_APPENDED_DTB. It is based against the Linus' official 3.6 version. Best regards, Tero Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-26 22:56:16 +07:00
kirkwood-nsa310.dtb \
ARM: Kirkwood: Add support for another ZyXEL NSA310 variant There are a number of variants of the ZyXEL NSA310, with slightly different LEDs, buttons and i2c devices. Add a DTS file to support one more of these variants. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Tibor Hársszegi <tibor@harsszegi.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-17 23:51:49 +07:00
kirkwood-nsa310a.dtb \
ARM: kirkwood: add support for OpenBlocks A7 platform The OpenBlocks A7 board is designed and sold by PlatHome, and based on a Kirkwood 6283 Marvell SoC. It is quite similar to the OpenBlocks A6 already supported in the kernel, with the following main differences: - The A6 uses a RTC on I2C, while the A7 uses the internal SoC RTC. - The A6 has one Ethernet port, while the A7 has two Ethernet ports - The A6 has only one USB port, while the A7 integrates a USB hub, which provides two front-side USB port, and an internal USB port as well. - The A6 has 512 MB of RAM, while the A7 has 1 GB of RAM. - Slightly different GPIOs for some functions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-10-30 23:55:09 +07:00
kirkwood-openblocks_a6.dtb \
kirkwood-openblocks_a7.dtb \
ARM: Kirkwood: DT versions of OpenRD boards Create DTS files to describe the Marvell OpenRD boards. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1399836639-1918-1-git-send-email-andrew@lunn.ch Tested-by: Francois Lorrain <francois.lorrain@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-12 02:30:39 +07:00
kirkwood-openrd-base.dtb \
kirkwood-openrd-client.dtb \
kirkwood-openrd-ultimate.dtb \
ARM: Kirkwood: Added support for pogoplug e02 (pink/gray) The pogoplug differs from the SheevaPlug only by a few details, but especially in the led assignments. This patch was tested under Gentoo Linux and is based on dts files from Arch Linux ARM and OpenWrt. Suggested-by: Felix Kaechele <heffer@fedoraproject.org> Suggested-by: Oleg Rakhmanov <moonman.ca@gmail.com> Signed-off-by: Christoph Junghans <ottxor@gentoo.org> [Andrew Lunn <andrew@lunn.ch>: Fixed subject line] Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-14 11:49:29 +07:00
kirkwood-pogo_e02.dtb \
ARM: Kirkwood: Add DT description of rd88f6192. Mechanically translate rd88f6192-nas-setup.c into DT equivelent. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-15 19:59:52 +07:00
kirkwood-rd88f6192.dtb \
ARM: Kirkwood: Fix DT based DSA. During the conversion of boards to use DT to instantiate Distributed Switch Architecture, nobody volunteered to test. As to be expected, the conversion was flawed. Testers and access to hardware has now become available, and this patch hopefully fixes the problems. dsa,mii-bus must be a phandle to the top level mdio node, not the port specific subnode of the mdio device. dsa,ethernet must be a phandle to the port subnode within the ethernet DT node, not the ethernet node. Don't pinctrl hog the card detect gpio for mvsdio. Rename the .dts files to make it clearer which file is for the Z0 stepping and which for the A0 or later stepping. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: seugene@marvell.com Tested-by: Eugene Sanivsky <seugene@marvell.com> Fixes: e2eaa339af44: ("ARM: Kirkwood: convert rd88f6281-setup.c to DT.") Fixes: e7c8f3808be8: ("ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT") Cc: <stable@vger.kernel.org> #v3.15+ Link: https://lkml.kernel.org/r/1409592941-22244-1-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-09-02 00:35:41 +07:00
kirkwood-rd88f6281-z0.dtb \
kirkwood-rd88f6281-a.dtb \
ARM: Kirkwood: Add support for many Synology NAS devices Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <andrew@lunn.ch> translation of the board setup file maintained by Ben Peddell <klightspeed@killerwolves.net> The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC. Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43. Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply. Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Tested-by: Ben Peddell <klightspeed@killerwolves.net> (ds211j) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-20 03:02:37 +07:00
kirkwood-rs212.dtb \
kirkwood-rs409.dtb \
kirkwood-rs411.dtb \
ARM: Kirkwood: Add dts files for Sheevaplug and eSATA Sheevaplug Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-14 04:19:00 +07:00
kirkwood-sheevaplug.dtb \
kirkwood-sheevaplug-esata.dtb \
ARM: kirkwood: Add dts file describing HP T5325 thin client Describe the T5325 using device tree properties, where possible. The first version of this file was produced by Thomas Petazzoni. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-26 00:34:02 +07:00
kirkwood-t5325.dtb \
ARM: Kirkwood: new board USI Topkick This is a new kirkwood box made by Universal Scientific Industrial, Inc. The product description is here: http://www.usish.com/english/products_topkick1281p2.php It is very similar to the dreamplug and other plug devices, with the exception that it has room for a 2.5" SATA HDD internally. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2012-10-22 09:15:35 +07:00
kirkwood-topkick.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
kirkwood-ts219-6281.dtb \
ARM: Kirkwood: Add DT description of QNAP 419 Re-implement the Marvell Kirkwood ts41x-setup.c in DT. As with the QNAP 119, there are two variants, depending on which SoC has been used. They differ on Ethernet PHY addresses and number of PCIe busses. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Ian Campbell <ijc@hellion.org.uk> (kirkwood-ts419-6281.dtb) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-01-07 05:49:17 +07:00
kirkwood-ts219-6282.dtb \
kirkwood-ts419-6281.dtb \
kirkwood-ts419-6282.dtb
ARM: dts: Add DT for Embedded Artists LPC4357 Developers Kit Adds basic support for Embedded Artists' LPC4357 Developer's Kit. Board features a LPC4357 Soc, 32 MB SDRAM, 128 MB NAND Flash, 16 MB SPI Flash, USB and Ethernet. More information can be found on: http://www.embeddedartists.com/products/kits/lpc4357_kit.php Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-12 05:00:51 +07:00
dtb-$(CONFIG_ARCH_LPC18XX) += \
ARM: dts: Add DT for Hitex LPC4350 Evaluation Board Add basic support for Hitex LPC4350 Evaluation Board. Board features a LPC4350 Soc, 8 MB SDRAM, 8 MB SPI Flash, USB and Ethernet. More information can be found on: http://www.hitex.com/index.php?id=3212 Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@gmail.com> Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-12 05:00:52 +07:00
lpc4350-hitex-eval.dtb \
ARM: dts: Add DT for Embedded Artists LPC4357 Developers Kit Adds basic support for Embedded Artists' LPC4357 Developer's Kit. Board features a LPC4357 Soc, 32 MB SDRAM, 128 MB NAND Flash, 16 MB SPI Flash, USB and Ethernet. More information can be found on: http://www.embeddedartists.com/products/kits/lpc4357_kit.php Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-12 05:00:51 +07:00
lpc4357-ea4357-devkit.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_LPC32XX) += \
ea3250.dtb phy3250.dtb
dtb-$(CONFIG_MACH_MESON6) += \
meson6-atv1200.dtb
ARM: dts: meson: add DTS file for MINIX NEO-X8 Add a DTS file for MINIX NEO-X8, a Meson8-based digital media player. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Carlo Caione <carlo@endlessm.com>
2015-03-02 01:19:26 +07:00
dtb-$(CONFIG_MACH_MESON8) += \
meson8-minix-neo-x8.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_MMP) += \
pxa168-aspenite.dtb \
arm: mmp: Make all the dts file to be compiled by Makefile Add items in arch/arm/boot/dt/Makefile to compile the dtb for mach-mmp. Change the dts and dtsi file to use #include instead of \include\ Signed-off-by: Chao Xie <chao.xie@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-10-31 09:13:52 +07:00
pxa910-dkb.dtb \
mmp2-brownstone.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_MOXART) += \
moxart-uc7112lx.dtb
dtb-$(CONFIG_SOC_IMX1) += \
ARM: i.MX: dts: Add support for the Freescale i.MX1 ADS board This patch adds support for the Freescale (Motorola) i.MX1 ADS board. This change is intended to further remove non-DT support for this board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-19 13:33:47 +07:00
imx1-ads.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
imx1-apf9328.dtb
dtb-$(CONFIG_SOC_IMX25) += \
ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard. The following devices/functionalities were added: * Main and secondary UARTs. * i2c and the pcf8563 device. * Ethernet. * NAND. * The BP1 button. * The LED. * Watchdog * SD. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-05 21:56:56 +07:00
imx25-eukrea-mbimxsd25-baseboard.dtb \
ARM: dts: imx25: mbimxsd25: Add displays support. The CMO-QVGA, DVI-VGA and DVI-SVGA displays were added. Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-22 21:00:43 +07:00
imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
ARM: dts: add missing imx dtb targets Add missing imx dtb targets, so that make dtbs can cover all imx dtbs. It's pretty useful for testing dts changes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 10:30:59 +07:00
imx25-karo-tx25.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
imx25-pdk.dtb
ARM: dts: fix imx27 dtb build rule The i.MX27 dtb build should be controlled by CONFIG_SOC_IMX27 rather than CONFIG_SOC_IMX31. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Fixes: cb612390e546 ("ARM: dts: Only build dtb if associated Arch and/or SoC is enabled") Cc: <stable@vger.kernel.org>
2015-05-19 21:06:41 +07:00
dtb-$(CONFIG_SOC_IMX27) += \
ARM: dts: add missing imx dtb targets Add missing imx dtb targets, so that make dtbs can cover all imx dtbs. It's pretty useful for testing dts changes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 10:30:59 +07:00
imx27-apf27.dtb \
ARM: imx: Add support for the Armadeus Systems APF27Dev docking board The APF27Dev is a docking board for an APF27 SOM Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-27 20:41:58 +07:00
imx27-apf27dev.dtb \
ARM: dts: Add support for the cpuimx27 board from Eukrea and its baseboard This patch adds support for the cpuimx27 board from Eukrea and its baseboard. This change is intended to further remove non-DT support for this board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-13 21:48:15 +07:00
imx27-eukrea-mbimxsd27-baseboard.dtb \
ARM: dts: add missing imx dtb targets Add missing imx dtb targets, so that make dtbs can cover all imx dtbs. It's pretty useful for testing dts changes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 10:30:59 +07:00
imx27-pdk.dtb \
ARM: dts: imx27-phytec-phycore-som: Add initial support for PCM970 RDK Patch adds initial dts for Phytec PCM970 Rapid development kit. - Added definition for UART0 and UART1. - Added additional SPI chipselect which used on RDK for ZegBee module. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-01 12:54:13 +07:00
imx27-phytec-phycore-rdk.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
imx27-phytec-phycard-s-rdk.dtb
dtb-$(CONFIG_SOC_IMX31) += \
imx31-bug.dtb
dtb-$(CONFIG_SOC_IMX35) += \
ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard. The following devices/functionalities were added: * Main and secondary UARTs. * i2c and the pcf8563 device. * Ethernet. * NAND. * The BP1 button. * The LED. * Watchdog * SD. Cc: Eric Bénard <eric@eukrea.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-15 23:32:12 +07:00
imx35-eukrea-mbimxsd35-baseboard.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
imx35-pdk.dtb
dtb-$(CONFIG_SOC_IMX50) += \
imx50-evk.dtb
dtb-$(CONFIG_SOC_IMX51) += \
ARM: dts: Add apf51 basic support Signed-off-by: Laurent Cans <laurent.cans@gmail.com> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-21 05:55:29 +07:00
imx51-apf51.dtb \
ARM: imx: Add support for the Armadeus Systems APF51Dev docking board The APF51Dev is a docking board for an APF51 SOM Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-08 14:41:38 +07:00
imx51-apf51dev.dtb \
ARM: boot: dts: Add an entry for imx27-pdk.dtb Add an entry for imx27-pdk.dtb, so that it can be generated by default. Also, add an entry into Documentation/devicetree/bindings/arm/fsl.txt. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-25 18:10:52 +07:00
imx51-babbage.dtb \
ARM i.MX51: Add Digi ConnectCore devicetree This patch adds support for Digi ConnectCore® i.MX51/Wi-i.MX51 SOM and basic support for the ConnectCore for i.MX51 JumpStart Kit. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-12 12:29:05 +07:00
imx51-digi-connectcore-jsk.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
imx51-eukrea-mbimxsd51-baseboard.dtb
dtb-$(CONFIG_SOC_IMX53) += \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx53-ard.dtb \
ARM: mx5: Add support for DENX M53EVK This patch adds support for the DENX M53EVK board. The board currently supports NAND, Ethernet, UART, CAN, I2C. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-23 04:23:47 +07:00
imx53-m53evk.dtb \
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 17:27:27 +07:00
imx53-mba53.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx53-qsb.dtb \
ARM: dts: i.MX53: add support for MCIMX53-START-R The "Start-R QSB" has a different PMIC than the older "Start QSB". Add a new devicetree for the Start-R. They both could use the same DT, as both PMICs (the dialog and the mc34708) have different i2c addresses and could coexist in the same DT without any errors. But once phandles are used, this will get messy. The pmic nodes are based on an earlier patch [PATCH] arm: imx53-qsb: Add Ripley driver DT nodes from Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> which apparently got lost/abandoned. I added phandles/newlines and changed the node name from ripley to mc34708. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-10 19:52:59 +07:00
imx53-qsrb.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx53-smd.dtb \
ARM: dts: imx53: add support for Ka-Ro TX53 modules This patch adds support for the Ka-Ro electronics GmbH TX53 modules. There are two distinct module types. One with an LVDS display interface and SATA support, the other with a parallel LCD interface and no SATA interface. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-18 15:18:38 +07:00
imx53-tx53-x03x.dtb \
imx53-tx53-x13x.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
imx53-voipac-bsb.dtb
dtb-$(CONFIG_SOC_IMX6Q) += \
ARM: dts: Armadeus Systems APF6 family support (i.MX6) Add support to the Armadeus Systems APF6 Solo / Dual / Quad SoM and the Armadeus Systems APF6Dev carrier board. For more details see: http://www.armadeus.com/english/products-processor_boards-apf6.html http://www.armadeus.com/english/products-development_boards-apf6_dev.html Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-15 20:44:27 +07:00
imx6dl-apf6dev.dtb \
ARM: dts: imx6: add aristainetos board support This patch add support for the imx6dl based aristainetos board with following configuration: CPU: Freescale i.MX6DL rev1.1 at 792 MHz DRAM: 1 GiB NAND: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB As this board can used with 2 different display types, the differences between them are extracted into 2 DTS files, and the common settings are collected in a common file. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-20 21:52:47 +07:00
imx6dl-aristainetos_4.dtb \
imx6dl-aristainetos_7.dtb \
ARM: dts: imx6: add DT for aristainetos2 board This patch adds support for the imx6dl based aristainetos2 board with following configuration: CPU: Freescale i.MX6DL rev1.1 at 792 MHz MReset cause: POR MBoard: aristaitenos2 DRAM: 1 GiB NAND: 1024 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16 MiB Display: lb07wv8 (800x480) As this board can be used with 2 different display types, the differences between them are extracted into 2 DTS files, and the common settings are collected in a common file. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-05-26 11:06:26 +07:00
imx6dl-aristainetos2_4.dtb \
imx6dl-aristainetos2_7.dtb \
ARM: imx: initial SolidRun Cubox-i support Add support for the SolidRun Cubox-i devices. This commit adds similar basic support as the HummingBoard. Further devices will be supported in future patches. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-16 23:12:38 +07:00
imx6dl-cubox-i.dtb \
ARM: dts: imx6: Add DFI FS700-M60 board support The DFI FS700-M60 is a q7 board with i.MX6 quad, dual, duallite or solo SoC. This adds support for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-18 15:41:30 +07:00
imx6dl-dfi-fs700-m60.dtb \
ARM: dts: add Gateworks Ventana support The Gateworks Ventana product family consists of several baseboard designs based on the Freescale i.MX6 family of processors. Each baseboard has a different set of possible features. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-07 14:24:56 +07:00
imx6dl-gw51xx.dtb \
imx6dl-gw52xx.dtb \
imx6dl-gw53xx.dtb \
imx6dl-gw54xx.dtb \
ARM: dts: Gateworks GW5510 support (i.MX6) Add support for the Gateworks GW5510 board featuring: * i.MX6 SoC * up to 512MB DDR3 * up to 2GB NAND flash * 1x miniPCIe socket (with USB) * HDMI out (micro-HDMI) * HDMI in (micro-HDMI) (currently supported by only vendor kernel) * TTL level I/O (supported by GW16111 breakout board): * I2C * 2x UART * CAN * 2x DIO (GPIO/PWM) * USB OTG For more details see: http://www.gateworks.com/product/item/ventana-gw5510-single-board-computer Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-07 22:38:00 +07:00
imx6dl-gw551x.dtb \
ARM: dts: Gateworks GW5520 support (i.MX6) Add support for the Gateworks GW5520 board. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-23 04:52:54 +07:00
imx6dl-gw552x.dtb \
ARM: imx: initial SolidRun HummingBoard support Add support for the SolidRun HummingBoard. This commit adds support for the following interfaces on this board: - Consumer Ir receiver - S/PDIF output - Both USB interfaces - Gigabit Ethernet using AR8035 - UART port Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-28 02:07:26 +07:00
imx6dl-hummingboard.dtb \
ARM: dts: imx: add nitrogen6x board Add file imx6q-nitrogen6x.dts, imx6dl-nitrogen6x.dts, imx6qdl-nitrogen6x.dtsi And add board to makefile. Eric Nelson created a web page to show the differences between Nitrogen6x and Sabre Lite boards. http://boundarydevices.com/differences-sabre-lite-nitrogen6x Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-17 08:13:03 +07:00
imx6dl-nitrogen6x.dtb \
ARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo The PBA-B-01 carrier board can be equipped with either Quad or DualLite/Solo phyFLEX i.MX6 modules (PFL-A-02). This moves all common devices into imx6qdl-phytec-pbab01.dtsi. The SoC specific device trees then just include the pfla01 and pbab01 dtsi files corresponding to the SoC variant. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14 22:37:24 +07:00
imx6dl-phytec-pbab01.dtb \
ARM: dts: add initial Rex Basic board support Add initial Rex Pro i.mx6dl board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6dl-rex-basic.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-08 21:49:23 +07:00
imx6dl-rex-basic.dtb \
ARM: dts: imx6: add new board RIoTboard add element14s RIoTboard http://www.riotboard.org which is an i.MX6Solo based design targeted at makers. Signed-off-by: Iain Paton<ipaton0@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-09 22:02:11 +07:00
imx6dl-riotboard.dtb \
ARM: dts: imx: add initial imx6dl-sabreauto support Add initial imx6dl-sabreauto support based on the common stuff already in imx6qdl-sabreauto.dtsi. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-02 13:38:11 +07:00
imx6dl-sabreauto.dtb \
ARM: dts: imx: sabrelite: add Dual Lite/Solo support This makes the structure of Sabre Lite board files the same as Sabre SD board files so that they are easier to compare. By this, I mean that the majority of the file imx6q-sabrelite.dts is moved to imx6qdl-sabrelite.dtsi so that both imx6q-sabrelite.dts and imx6dl-sabrelite.dts can include it. Now Sabre Lite has support for Dual Lite/Solo processors. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-13 08:49:05 +07:00
imx6dl-sabrelite.dtb \
ARM: dts: imx: add initial imx6dl-sabresd support Add initial imx6dl-sabresd support based on the common stuff already in imx6qdl-sabresd.dtsi. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-02 13:04:45 +07:00
imx6dl-sabresd.dtb \
ARM: dts: imx6: add support for Ka-Ro TX6 modules This patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are five distinct module types with either i.MX6Q or i.MX6DL and LVDS or LCD display interface and one DTS file for a complete system with an i.MX6DL based TX6 module and a baseboard mounted on the back of a display (imx6dl-tx6dl-comtft.dts). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-12 20:05:17 +07:00
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6u-801x.dtb \
imx6dl-tx6u-811x.dtb \
ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo For more information about the Udoo boards: http://www.udoo.org/ Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-12-23 00:29:21 +07:00
imx6dl-udoo.dtb \
ARM: dts: Add initial support for Wandboard Dual-Lite Wandboard is a development board that has two variants: one version based on mx6 dual lite and another one based on mx6 solo. For more details about Wandboard, please refer to: http://www.wandboard.org/ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-03 19:29:16 +07:00
imx6dl-wandboard.dtb \
ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. The rev C1 Wandboard uses the Broadcom 4330 for WiFi and Bluetooth instead of the 4329. This changes the PADS assigned for the control lines. Another side effect of the change is that on the rev C1 board, usdhc driver can't detect the chip presence correctly so usdhc2 now needs its 'non-removeable' property removed. So that rev B1 and earlier can continue to work, this patch splits the board-specific definitions from imx6qdl-wandboard.dtsi into imx6qdl-wandboard-revb1.dtsi and imx6qdl-wandboard-revc1.dtsi. The new files include the original base imx6qdl-wandboard.dtsi which retains the common definitions. The existing imx6dl-wandboard.dts includes imx6qdl-wandboard-revc1.dtsi and imx6dl-wandboard-revb1.dts (new) includes imx6qdl-wandboard-revb1.dtsi. This makes the rev C1 board the new default. The same pattern is used for imx6q-wandboard.dts. So, from U-Boot on a WB-Quad you use imxq-wandboard-revb1.dtb for the older B1 board and imxq-wandboard.dtb for the current rev C1 board. Signed-off-by: George Joseph <george.joseph@fairview5.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-09 01:48:16 +07:00
imx6dl-wandboard-revb1.dtb \
ARM: dts: Armadeus Systems APF6 family support (i.MX6) Add support to the Armadeus Systems APF6 Solo / Dual / Quad SoM and the Armadeus Systems APF6Dev carrier board. For more details see: http://www.armadeus.com/english/products-processor_boards-apf6.html http://www.armadeus.com/english/products-development_boards-apf6_dev.html Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-15 20:44:27 +07:00
imx6q-apf6dev.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx6q-arm2.dtb \
ARM: dts: Add initial support for cm-fx6. Add initial support for cm-fx6 module. cm-fx6 is a module based on mx6q SoC with the following features: - Up to 4GB of DDR3 - 1 LCD/DVI output port - 1 HDMI output port - 2 LVDS LCD ports - Gigabit Ethernet - Analog Audio - CAN - SATA - NAND - PCIE This patch allows to boot up the module, configures the serial console, the Ethernet adapter and the heartbeat led. cm-fx6 is embedded inside the Utilite computer. Signed-off-by: Valentin Raevsky <valentin@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-29 19:11:43 +07:00
imx6q-cm-fx6.dtb \
ARM: imx: initial SolidRun Cubox-i support Add support for the SolidRun Cubox-i devices. This commit adds similar basic support as the HummingBoard. Further devices will be supported in future patches. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-16 23:12:38 +07:00
imx6q-cubox-i.dtb \
ARM: dts: imx6: Add DFI FS700-M60 board support The DFI FS700-M60 is a q7 board with i.MX6 quad, dual, duallite or solo SoC. This adds support for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-18 15:41:30 +07:00
imx6q-dfi-fs700-m60.dtb \
ARM: dts: imx6: Add support for imx6q dmo edmqmx6 Signed-off-by: Silvio F <silvio.fricke@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-07 20:54:27 +07:00
imx6q-dmo-edmqmx6.dtb \
ARM: dts: imx6q: Add support for Zealz GK802 Add support for the GK802 'QUAD CORE Mini PC', which seems to be loosely based on the Freescale i.MX6Q HDMI dongle reference design. It is supposedly identical to the Hiapad Hi802. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-19 09:28:12 +07:00
imx6q-gk802.dtb \
ARM: dts: add Gateworks Ventana support The Gateworks Ventana product family consists of several baseboard designs based on the Freescale i.MX6 family of processors. Each baseboard has a different set of possible features. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-07 14:24:56 +07:00
imx6q-gw51xx.dtb \
imx6q-gw52xx.dtb \
imx6q-gw53xx.dtb \
imx6q-gw5400-a.dtb \
imx6q-gw54xx.dtb \
ARM: dts: Gateworks GW5510 support (i.MX6) Add support for the Gateworks GW5510 board featuring: * i.MX6 SoC * up to 512MB DDR3 * up to 2GB NAND flash * 1x miniPCIe socket (with USB) * HDMI out (micro-HDMI) * HDMI in (micro-HDMI) (currently supported by only vendor kernel) * TTL level I/O (supported by GW16111 breakout board): * I2C * 2x UART * CAN * 2x DIO (GPIO/PWM) * USB OTG For more details see: http://www.gateworks.com/product/item/ventana-gw5510-single-board-computer Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-07 22:38:00 +07:00
imx6q-gw551x.dtb \
ARM: dts: Gateworks GW5520 support (i.MX6) Add support for the Gateworks GW5520 board. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-23 04:52:54 +07:00
imx6q-gw552x.dtb \
ARM: dts: hummingboard: Split HummingBoard DT to support s/dl and d/q Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-23 16:11:36 +07:00
imx6q-hummingboard.dtb \
ARM: dts: imx: add nitrogen6x board Add file imx6q-nitrogen6x.dts, imx6dl-nitrogen6x.dts, imx6qdl-nitrogen6x.dtsi And add board to makefile. Eric Nelson created a web page to show the differences between Nitrogen6x and Sabre Lite boards. http://boundarydevices.com/differences-sabre-lite-nitrogen6x Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-17 08:13:03 +07:00
imx6q-nitrogen6x.dtb \
ARM: dts: Phytec imx6q pfla02 and pbab01 support Add support for imx6q Phytec phyFLEX-i.MX6 Quad (aka pfla02 and pbab01). - Module pfla02 - Carrier-Board pbab01 Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-12 00:48:22 +07:00
imx6q-phytec-pbab01.dtb \
ARM: dts: add initial Rex Pro board support Add initial Rex Pro i.mx6q board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6q-rex-pro.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-08 21:49:22 +07:00
imx6q-rex-pro.dtb \
ARM: dts: imx6q-sabreauto: Add basic support mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-08 00:12:49 +07:00
imx6q-sabreauto.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx6q-sabrelite.dtb \
ARM: dts: MicroSys sbc6x support (i.MX6) Add support for MicroSys sbc6x board. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 19:24:22 +07:00
imx6q-sabresd.dtb \
ARM: dts: imx6sl: add initial imx6sl-evk support Add initial imx6sl-evk board support with uart, usdhc and fec enabled. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-03 10:28:42 +07:00
imx6q-sbc6x.dtb \
ARM: dts: add initial support for TBS2910 Matrix ARM mini PC TBS2910 is a i.MX6Q based board. For additional details refer to http://www.tbsdtv.com/products/tbs2910-matrix-arm-mini-pc.html Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-10-28 02:10:51 +07:00
imx6q-tbs2910.dtb \
ARM: dts: imx6: add support for Ka-Ro TX6 modules This patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are five distinct module types with either i.MX6Q or i.MX6DL and LVDS or LCD display interface and one DTS file for a complete system with an i.MX6DL based TX6 module and a baseboard mounted on the back of a display (imx6dl-tx6dl-comtft.dts). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-12 20:05:17 +07:00
imx6q-tx6q-1010.dtb \
imx6q-tx6q-1010-comtft.dtb \
imx6q-tx6q-1020.dtb \
imx6q-tx6q-1020-comtft.dtb \
imx6q-tx6q-1110.dtb \
ARM: dts: imx6q: sort dtbs in makefile Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-24 05:45:34 +07:00
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_IMX6SL) += \
ARM: dts: warp: Add initial WaRP Board support The WaRP Board is a Wearable Reference Plaform. The board features: - Freescale i.MX6 SoloLite processor with 512MB of RAM - Freescale FXOS8700CQ 6-axis Xtrinsic sensor - Freescale Kinetis KL16 MCU - Freescale Xtrinsic MMA955xL intelligent motion sensing platform The board implements a hybrid architecture to address the evolving needs of the wearables market. The platform consists of a main board and an example daughtercard with the ability to add additional daughtercards for different usage models. For more information about the project, visit: http://www.warpboard.org/ Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-03 10:41:45 +07:00
imx6sl-evk.dtb \
imx6sl-warp.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_IMX6SX) += \
ARM: dts: imx6sx: add i.mx6sx sabreauto board support Add basic i.MX6SoloX Sabre Auto board support, currently only debug UART and uSDHC are supported on this board. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-12-17 11:22:09 +07:00
imx6sx-sabreauto.dtb \
ARM: imx6sx-sdb: add revb board and make it default Since imx6sx-sdb reva board is experimental and will not be used formally (eg, no software release based on it), we set revb board as the formal imx6sx-sdb board. The imx6sx-sdb uses pfuse200 as pmic which has only one power supply for both VDDARM_IN and VDDSOC_IN, so VDDARM_IN and VDDSOC_IN have to use the same (higher one in the same frequency) one as its power supply, that's the reason we override the OPP setting in board dts file. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-02-26 15:28:30 +07:00
imx6sx-sdb-reva.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
imx6sx-sdb.dtb
ARM: dts: add imx7d-sdb support add imx7d sdb board support Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-19 01:45:05 +07:00
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-sdb.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_LS1021A) += \
ARM: dts: Add initial LS1021A QDS board dts support The LS1021A QorIQ development system (QDS) is a high-performance computing evaluation, development and test platform supporting the LS1021A processor. The LS1021A QDS is optimized to support the high-bandwidth DDR3LP/DDR4 memory and a full complement of high-speed SerDes ports. For more detail information about the LS1021AQDS, please refer to the QorIQ LS1021A Development System Reference Manual. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Chao Fu <B44548@freescale.com> Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Jaiprakash Singh <b44839@freescale.com> Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-10-31 16:01:09 +07:00
ls1021a-qds.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
ls1021a-twr.dtb
dtb-$(CONFIG_SOC_VF610) += \
ARM: dts: vf500-colibri: add Colibri VF50 support Add Colibri VF50 device tree files vf500-colibri.dtsi and vf500-colibri-eval-v3.dts, in line with the Colibri VF61 device tree files. However, to minimize dupplication we also add vf-colibri.dtsi and vf-colibri-eval-v3.dtsi which contain the common device tree nodes. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-03 03:36:47 +07:00
vf500-colibri-eval-v3.dtb \
ARM: dts: vf610-colibri: split device tree for carrier boards The Colibri VF61 is a module which needs a carrier board to actually run. Different carrier board have different hardware support, hence we should reflect this in the device tree files. This patch adds the Colibri Evaluation Board, which supports almost all peripherals defined in the Colibri standard. Also align the compatible naming, file splitting and file naming with the scheme which was choosen for the Tegra based modules. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 21:25:18 +07:00
vf610-colibri-eval-v3.dtb \
ARM: dts: add support for Vybrid running on Cortex-M4 This adds an initial device tree to run Linux on the Cortex-M4 on the Vybrid based Colibri VF61 module. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-20 05:05:18 +07:00
vf610m4-colibri.dtb \
ARM: dts: add initial VF610 Cosmic/Cosmic+ board support Add initial PHYTEC VF610 Cosmic/Cosmic+ board support with UART and FEC enabled. Signed-off-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-23 22:14:44 +07:00
vf610-cosmic.dtb \
ARM: dts: add initial VF610 Tower board dts support Add initial Freescale Vybrid VF610 Tower board support with uart and fec enabled. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-28 16:12:23 +07:00
vf610-twr.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_MXS) += \
imx23-evk.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx23-olinuxino.dtb \
imx23-stmp378x_devb.dtb \
ARM: mxs: Add support for the Armadeus Systems APF28 module The APF28 is a small SOM built around an i.MX28 processor with 128MBytes DDR2, 256MBytes NAND Flash and an Ethernet PHY. Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-18 16:50:26 +07:00
imx28-apf28.dtb \
ARM: mxs: Add support for the Armadeus Systems APF28Dev docking board The APF28Dev is a docking board for an APF28 SOM Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-01 00:39:26 +07:00
imx28-apf28dev.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree support The CFA-10037 is another expansion board for the CFA-10036 module, with only a USB Host, a Ethernet device and a lot of gpios. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-26 12:40:37 +07:00
imx28-cfa10037.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 12:53:18 +07:00
imx28-cfa10049.dtb \
ARM: mxs: dt: Add the Crystalfontz CFA-10055 device tree The CFA-10055 is yet another breakout board for the CFA-10036, and is basically a CFA-10037, with the screen and LCD controller found on the CFA-10049. Signed-off-by: Brian Lilly <brian@crystalfontz.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-13 20:43:44 +07:00
imx28-cfa10055.dtb \
ARM: mxs: dt: Add Crystalfontz CFA-10056 device tree The CFA-10056 is a breakout board for the CFA-10036, and is basically a CFA-10037, with a 4.3" screen. Signed-off-by: Brian Lilly <brian@crystalfontz.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-01 20:23:23 +07:00
imx28-cfa10056.dtb \
ARM: mxs: dt: Add Crystalfontz CFA-10057 device tree The CFA-10057 is a breakout board for the CFA-10036 that has Ethernet, USB and a 4.3" LCD screen on it. Signed-off-by: Brian Lilly <brian@crystalfontz.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-13 20:43:45 +07:00
imx28-cfa10057.dtb \
ARM: mxs: dt: Add Crystalfontz CFA-10058 device tree The CFA-10058 is a breakout board for the CFA-10036 that has Ethernet, USB and a 5" LCD screen on it. Signed-off-by: Brian Lilly <brian@crystalfontz.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-01 20:23:24 +07:00
imx28-cfa10058.dtb \
ARM: mxs: add support for I2SE's duckbill series Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-09 18:14:16 +07:00
imx28-duckbill.dtb \
ARM: mxs: Add support for the eukrea-cpuimx28. The following devices/functionalities were tested: * Main UART. * Ethernet0. * Ethernet1. * SD. * USB host. * USB otg. * Display(and its backlight). * Touchscreen. * Audio. * nand. * i2c and the pcf8563 device. * The gpio buttons. * The gpio leds. * Watchdog Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-05 20:28:06 +07:00
imx28-eukrea-mbmx283lc.dtb \
imx28-eukrea-mbmx287lc.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx28-evk.dtb \
ARM: dts: mxs: Add MSR M28CU3 board This board is based on the M28 SoM with custom baseboard. Supported are LEDs, ethernet, PWM, LCD, SD slots. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-30 05:41:29 +07:00
imx28-m28cu3.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx28-m28evk.dtb \
ARM: mxs: Add SchulerControl SPS1 DTS file Add DTS file for this custom board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-19 04:08:29 +07:00
imx28-sps1.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
imx28-tx28.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_NOMADIK) += \
ste-nomadik-s8815.dtb \
ARM: nomadik: device tree for NHK15 board This adds a device tree for the Nomadik NHK15 development kit board. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-10 03:10:35 +07:00
ste-nomadik-nhk15.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_NSPIRE) += \
nspire-cx.dtb \
arm: Add device trees for TI-Nspire hardware This patch adds device trees for describing the TI-Nspire hardware. Changes between v1 and v2: * Change "keymap" binding to the standard "linux,keymap" binding. Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-11 15:40:18 +07:00
nspire-tp.dtb \
nspire-clp.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_OMAP2) += \
omap2420-h4.dtb \
ARM: dts: Add basic Nokia N8X0 support Add minimal device tree support for n8x0 boards so we can make omap2 device tree only. Note that we still need to initialize various platform data quirks to keep things working until n8x0 drivers support device tree. Here's a rough todo list for the people using n8x0: 1. Update menelaus for device tree and set up regulators at least for the MMC driver 2. Remove the MMC regulator platform data callback by using the Menlaus regulators directly in the driver passed from the .dts file 3. Update GPMC connected devices for onenand and tusb6010 for device tree We're planning to remove all legacy platform data for mach-omap2 over next few merge cycles, so if people are still using n8x0, please fix the issues above. Cc: devicetree@vger.kernel.org Cc: "Benoît Cousson" <bcousson@baylibre.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 06:15:24 +07:00
omap2420-n800.dtb \
omap2420-n810.dtb \
omap2420-n810-wimax.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap2430-sdp.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_OMAP3) += \
am3517-craneboard.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit The LogicPD Torpedo DM3730 devkit consists of a base board and two processor boards. One of the processor boards has a WLAN and the other one does not. Let's set up basic dts file so we can move to device tree only based booting over next few merge windows. So far I've tested that UARTs, MMC1, USB OTG, smsc911x, and basic PM support works. Note that the wireless support in kernel for wl1283 seems to be broken, it tries to load wl127x-nvs.bin instead of wl128x-nvs.bin with firmware. Cc: Tim Nordell <tim.nordell@logicpd.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-20 23:23:43 +07:00
logicpd-torpedo-37xx-devkit.dtb \
ARM: dts: OMAP3: Add support for OMAP3430 SDP board Adds basic device-tree support for OMAP3430 SDP board which has 256MB of RAM, 128MB ONENAND flash, 256MB NAND flash and uses the TWL4030 power management IC. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-01-11 23:39:22 +07:00
omap3430-sdp.dtb \
ARM: dts: Add omap3-beagle.dts Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This version of the Beagle board has 256MB of DDR and features the same TWL4030 power management IC (PMIC) as the Beagle board XM. Given that the Beagle and Beagle-XM boards use the same PMIC, move the definition of the VSIM regulator into the TWL4030.dtsi file so that we do not need to duplicate in the Beagle board dts file. This has been boot tested on an OMAP3530 Beagle board and verifing that the SD/MMC interface is working with a SD card. V2 changes - Rebased upon of devel-dt - Corrected copyright date in omap3-beagle.dts file - Added LED support after verifing that Beagle and Beagle XM have the same LED configuration Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-11 23:01:59 +07:00
omap3-beagle.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-beagle-xm.dtb \
omap3-beagle-xm-ab.dtb \
ARM: dts: sbc-t3517: add support for sbc-t3517 Add support for CM-T3517 CoM and SBC-T3517 board. reused common support for sbc-t3x boards (omap3-cm-t3x.dtsi, omap3-sb-t35.dtsi): * SB-T35 baseboard eth * MMC1, UART3 * HS USB Port 1/2 * I2C1/3 * Heartbit led Added basic support for: * MMC1 wp/cd signals * CM-T3517 Usb Hub * WL12xx WiFi chip * Davinci EMAC * AM35X OTG Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-01-12 20:22:54 +07:00
omap3-cm-t3517.dtb \
ARM: dts: sbc-t3530: add support for sbc-t3530 Add support for CM-T3530 CoM and SBC-T3530 board. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-01-12 20:22:53 +07:00
omap3-cm-t3530.dtb \
ARM: dts: Add support for sbc-3xxx with cm-t3730 This adds support for CompuLab SBC-T3530, also known as cm-t3730: http://compulab.co.il/products/sbcs/sbc-t3530/ It seems that with the sbc-3xxx mainboard is also used on SBC-T3517 and SBC-T3730 with just a different CPU module: http://compulab.co.il/products/sbcs/sbc-t3517/ http://compulab.co.il/products/sbcs/sbc-t3730/ So let's add a common omap3-sb-t35.dtsi and then separate SoC specific omap3-sbc-t3730.dts, omap3-sbc-t3530.dts and omap3-sbc-t3517.dts. I've tested this with SBC-T3730 as that's the only one I have. At least serial, both Ethernet controllers, MMC, and wl12xx WLAN work. Note that WLAN seems to be different for SBC-T3530. And SBC-T3517 may need some changes for the EMAC Ethernet if that's used instead of the smsc911x. Cc: devicetree@vger.kernel.org Cc: Mike Rapoport <mike@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-19 04:13:21 +07:00
omap3-cm-t3730.dtb \
ARM: dts: Add minimal DT support for DevKit8000 DevKit8000 is a beagle board clone from Timll, sold by armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D, S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and JTAG interface. Add the basic DT support for devkit8000. It includes: - twl4030 (PMIC) - MMC1 - I2C1 - leds Signed-off-by: Anil Kumar <anilk4.v@gmail.com> Tested-by: Thomas Weber <thomas@tomweber.eu> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-16 16:59:21 +07:00
omap3-devkit8000.dtb \
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 11:11:45 +07:00
omap3-evm.dtb \
ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM) I've tested the serial, MMC, smsc911x, wl12xx, and off-idle support with the pinctrl patches, so it probably works better than the board-*.c files ever did. Also the board-omap3evm.c file is broken for the DSS, and has been for a while. Patches are welcome to fix it in this .dts file, let's just drop the board-*.c file for this. Note that off-idle currently requires doing request_irq() on the wake-up pin from pinctrl-single IRQ domain until we can handle that in some Linux generic way. [tony@atomide.com: updated for make dtbs build fix] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-15 01:31:43 +07:00
omap3-evm-37xx.dtb \
ARM: dts: Add gta04a3 model Add gta04a3 model with additional acceleromer. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-29 02:53:32 +07:00
omap3-gta04a3.dtb \
ARM: dts: omap3-gta04: Rename gta04.dts to gta04.dtsi and add a4 model This patch is preparation of adding more boards which have common moved to omap3-gta04.dtsi. Other boards have only small additions to omap3-gta04a4. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-29 02:53:31 +07:00
omap3-gta04a4.dtb \
ARM: dts: Add gta04a5 model Add model a5 which have additional jack detection. Signed-off-by: Marek Belisko <marek@goldelico.com> [tony@atomide.com: fixed a typo for make dtbs to work] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-29 02:53:33 +07:00
omap3-gta04a5.dtb \
ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based) These baseboards are equipped with the Technexion TAO35030 SOM. So they include this dtsi. The common parts are extracted into an "common" dtsi file. The main difference between both boards is, that the *lcd has DSS support enabled for the LCD. Some HEAD acoustics specific features are: - LED handling - Special FPGA/DSP audio driver (not included in this series) - powerdown GPIO Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-08-29 17:40:06 +07:00
omap3-ha.dtb \
omap3-ha-lcd.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-igep0020.dtb \
ARM: dts: omap3-igep0020-rev-f: Support IGEPv2 Rev. F Add support for the new hardware revision of the IGEPv2. Basically, the new revision F replaces the old Wifi module for a Wilink8 based module. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-06 19:01:49 +07:00
omap3-igep0020-rev-f.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-igep0030.dtb \
ARM: dts: omap3-igep0030-rev-g: Support IGEP COM MODULE Rev. G Add support for the new hardware revision of the IGEP COM MODULE. Basically, the new revision G replaces the old Wifi module for a Wilink8 based module. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-06 19:01:47 +07:00
omap3-igep0030-rev-g.dtb \
ARM: dts: Add basic support for omap3 LDP zoom1 labrador Basic things like serial, Ethernet, MMC, NAND, DSS, touchscreen and GPIO keys work. For twl4030-keypad we're still missing the binding, but support for that should be trivial to add once the driver has been updated. MUSB I'm pretty sure I got got to enumerate once, but I suspect the battery charging somehow disrupts it and it's not enumerating in general for some reason. Patches are welcome to improve things if people are still using this board. For reference, here's some more info on this old board: http://www.openomap.org/wiki/tiki-index.php?page=HardwareInfo Cc: devicetree@vger.kernel.org Cc: "Benoît Cousson" <bcousson@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 06:15:39 +07:00
omap3-ldp.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-lilly-dbb056.dtb \
ARM: dts: N900: Add device tree This adds device tree with necessary support to boot with functional video (on both emulator and real N900 device). Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-08-13 20:36:36 +07:00
omap3-n900.dtb \
ARM: dts: add minimal DT support for Nokia N950 & N9 phones Add minimal DT support for Nokia N950 & N9 phones. The same functionality that is provided by the current board file should work: serial console, USB, OneNAND and MMC. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-16 03:36:09 +07:00
omap3-n9.dtb \
omap3-n950.dtb \
ARM: dts: Add support for the Overo Alto35 Alto35 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-11 19:20:33 +07:00
omap3-overo-alto35.dtb \
ARM: dts: Add support for the Overo Chestnut43 Chestnut43 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-11 19:20:34 +07:00
omap3-overo-chestnut43.dtb \
ARM: dts: Add support for the Overo Gallop43 Gallop43 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-11 19:20:32 +07:00
omap3-overo-gallop43.dtb \
ARM: dts: overo: Add device tree for Palo35 board Also, reduce the maximum SPI device speed to the max. supported by the LCD controller used on the LGPhilips LB035Q02 panel for this board. Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-13 03:37:26 +07:00
omap3-overo-palo35.dtb \
ARM: dts: Add support for the Overo Palo43 Palo43 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-11 19:20:31 +07:00
omap3-overo-palo43.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-overo-storm-alto35.dtb \
omap3-overo-storm-chestnut43.dtb \
omap3-overo-storm-gallop43.dtb \
ARM: dts: overo: Add device tree for Palo35 board Also, reduce the maximum SPI device speed to the max. supported by the LCD controller used on the LGPhilips LB035Q02 panel for this board. Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-13 03:37:26 +07:00
omap3-overo-storm-palo35.dtb \
ARM: dts: Add support for the Overo Palo43 Palo43 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-11 19:20:31 +07:00
omap3-overo-storm-palo43.dtb \
ARM: dts: Add support for the Overo Summit Summit is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-11 19:20:35 +07:00
omap3-overo-storm-summit.dtb \
ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi Unfortunatly the device tree for older OMAP35xx Overo cannot be used with newer OMAP36xx and vice-versa. To address this issue, move most of the Tobi DTS to a common include file, and create model-specific Tobi DTS. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-13 17:25:15 +07:00
omap3-overo-storm-tobi.dtb \
ARM: dts: Add DTS for Gumstix TobiDuo expansion board The Gumstix "Tobi-Duo" expansion board [1] can be used with either OMAP3 Overo or Overo Storm COMs. It provides two NICs using LAN9221 chips. It is necessary to duplicate the interface information for the second SMSC9221 chip as discussed [2]. [1] https://store.gumstix.com/index.php/products/241/ [2] http://www.spinics.net/lists/linux-omap/msg115282.html Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-13 03:37:23 +07:00
omap3-overo-storm-tobiduo.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-overo-summit.dtb \
omap3-overo-tobi.dtb \
ARM: dts: Add DTS for Gumstix TobiDuo expansion board The Gumstix "Tobi-Duo" expansion board [1] can be used with either OMAP3 Overo or Overo Storm COMs. It provides two NICs using LAN9221 chips. It is necessary to duplicate the interface information for the second SMSC9221 chip as discussed [2]. [1] https://store.gumstix.com/index.php/products/241/ [2] http://www.spinics.net/lists/linux-omap/msg115282.html Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-13 03:37:23 +07:00
omap3-overo-tobiduo.dtb \
ARM: dts: omap3-pandora: add OMAP3530 600 MHz version Added Pandora Rebirth model which is based on Pandora Classic with 512 MiB DDR-333 SDRAM memory. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Reviewed-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-28 04:26:38 +07:00
omap3-pandora-600mhz.dtb \
ARM: dts: omap3-pandora: add DM3730 1 GHz version Added Pandora 1 GHz model which is based on Classic/Rebirth with following changes: - upgraded cpu to dm3730 runs on 1GHz - 512 MiB DDR-333 SDRAM @ 200 MHz Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Reviewed-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-28 04:26:39 +07:00
omap3-pandora-1ghz.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-sbc-t3517.dtb \
omap3-sbc-t3530.dtb \
omap3-sbc-t3730.dtb \
ARM: dts: omap3: Add Technexion Thunder support (TAO3530 SOM based) This baseboard is equipped with the Technexion TAO35030 SOM. So includes this dtsi. Some Thunder specific features are: - LCD panel Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-08-29 17:40:05 +07:00
omap3-thunder.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
omap3-zoom3.dtb
More changes for omap dts files mostly to add support for dm816x devices and clocks. Also adds a qspi device for dra72x-evm. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUvpqoAAoJEBvUPslcq6Vz2uwQALoPyfwWCDUlxZbZy/yNPq0b +l90dAo65hzrsPo9kWswj/lDfFDwTrLjxL9KcRu0gaoQp+UUgDOTuTIVe2ftqU4T 6C6MqriKlHL6vRYmm5BOrQq+Oc+xjdNSxfnCPOouOQRESJG8Jf7+5DykUkVcgh7n PeLaRLLb8AtEg0eBzRl7DtqvCJDU9zq8WkbtEeNso/j7P2uZ3DL/jieS0nyx9n14 fcHlHmNlBCAUH80DfbpU9QkfAg2G3DAahtdFFBrct/CltdbkprS3efzBGawQpRrh XBqWsFCnNz4nzAshFHgKsTmtX94mgzLj89VwvsVtVTnErlC7umbrUiPrj358F72Y lZib7jl3BLiVsDWSqIw5iulkpS+ukW1iBCzlp5C87DSXE97XJr7UscbA9EQMesFl bHcfq9cbpvMK6hujdx2QuZcSeahjvHSguIrxGtgtcf6Xj4Rx/iDGaTpalA5fxl65 VJn1FHmC74MYcpwnZSXk8KqVyX6IjlfRnc3C9Nt5GRXLx98h09l62LyIaMq2xAKv EvNoKf9T7MKo1ayhCDkja4ObcRU8HhR4v5Z32NkumbqT2jP8TjhzRGuLynMiNV1w M3Rv11D2wCo1e30vJjCpBI/cJOa6pdHFiWQrmmDI09wAywhZbmikxUJ0OIf5/H5r D+eWlZQSGWvtsRlVRkwI =vWKv -----END PGP SIGNATURE----- Merge tag 'omap-for-v3.20/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap device tree changes for v3.20, part 2" from Tony Lindgren: More changes for omap dts files mostly to add support for dm816x devices and clocks. Also adds a qspi device for dra72x-evm. * tag 'omap-for-v3.20/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra72-evm: Add qspi device ARM: dts: Add minimal support for dm8168-evm ARM: dts: Add basic clocks for dm816x ARM: dts: Add basic dm816x device tree configuration Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-24 04:48:57 +07:00
dtb-$(CONFIG_SOC_TI81XX) += \
ARM: dts: Add minimal dts support for dm8148-evm Add minimal dts support for dm8148-evm. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-24 12:33:18 +07:00
dm8148-evm.dtb \
ARM: dts: Add minimal support for HP T410 Add minimal support for HP T410. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-24 12:33:19 +07:00
dm8148-t410.dtb \
More changes for omap dts files mostly to add support for dm816x devices and clocks. Also adds a qspi device for dra72x-evm. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUvpqoAAoJEBvUPslcq6Vz2uwQALoPyfwWCDUlxZbZy/yNPq0b +l90dAo65hzrsPo9kWswj/lDfFDwTrLjxL9KcRu0gaoQp+UUgDOTuTIVe2ftqU4T 6C6MqriKlHL6vRYmm5BOrQq+Oc+xjdNSxfnCPOouOQRESJG8Jf7+5DykUkVcgh7n PeLaRLLb8AtEg0eBzRl7DtqvCJDU9zq8WkbtEeNso/j7P2uZ3DL/jieS0nyx9n14 fcHlHmNlBCAUH80DfbpU9QkfAg2G3DAahtdFFBrct/CltdbkprS3efzBGawQpRrh XBqWsFCnNz4nzAshFHgKsTmtX94mgzLj89VwvsVtVTnErlC7umbrUiPrj358F72Y lZib7jl3BLiVsDWSqIw5iulkpS+ukW1iBCzlp5C87DSXE97XJr7UscbA9EQMesFl bHcfq9cbpvMK6hujdx2QuZcSeahjvHSguIrxGtgtcf6Xj4Rx/iDGaTpalA5fxl65 VJn1FHmC74MYcpwnZSXk8KqVyX6IjlfRnc3C9Nt5GRXLx98h09l62LyIaMq2xAKv EvNoKf9T7MKo1ayhCDkja4ObcRU8HhR4v5Z32NkumbqT2jP8TjhzRGuLynMiNV1w M3Rv11D2wCo1e30vJjCpBI/cJOa6pdHFiWQrmmDI09wAywhZbmikxUJ0OIf5/H5r D+eWlZQSGWvtsRlVRkwI =vWKv -----END PGP SIGNATURE----- Merge tag 'omap-for-v3.20/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap device tree changes for v3.20, part 2" from Tony Lindgren: More changes for omap dts files mostly to add support for dm816x devices and clocks. Also adds a qspi device for dra72x-evm. * tag 'omap-for-v3.20/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra72-evm: Add qspi device ARM: dts: Add minimal support for dm8168-evm ARM: dts: Add basic clocks for dm816x ARM: dts: Add basic dm816x device tree configuration Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-24 04:48:57 +07:00
dm8168-evm.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_AM33XX) += \
ARM: dts: add DTS for Baltos IR5221 This device is an industrial PC based on AM335x SoC. [ balbi@ti.com : updated to fit current mainline ] Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-19 15:29:48 +07:00
am335x-baltos-ir5221.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
am335x-base0033.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
am335x-bone.dtb \
am335x-boneblack.dtb \
ARM: dts: am335x-sl50: Add Toby-Churchill SL50 board support. Add support for Lightwriter SL50 series board, a small, robust and portable Voice Output Communication Aids (VOCA) designed to meet the particular and changing needs of people with speech loss resulting from a wide range of acquired, progressive and congenital conditions. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Andy Simpkins <andy.simpkins@toby-churchill.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-28 23:49:50 +07:00
am335x-sl50.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
am335x-evm.dtb \
am335x-evmsk.dtb \
ARM: dts: Add devicetree for Gumstix Pepper board This adds the Gumstix Pepper[1] single-board computer based on the TI AM335x processor. Schematics are available [2]. [1] https://store.gumstix.com/index.php/products/344/ [2] https://pubs.gumstix.com/boards/PEPPER/ Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-06-11 05:22:00 +07:00
am335x-nano.dtb \
ARM: dts: Add devicetree for NovaTech OrionLXm This adds the NovaTech OrionLXm which is based on the AM335x SoC http://www.novatechweb.com/substation-automation/orionlxm/ RAM: 512MiB Flash: 4GB eMMC Ethernet PHYs: 2x Micrel KSZ8041FTLI USB ports are used internally by the expansion cards. Internal micro SD slot is available. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-18 02:02:35 +07:00
am335x-pepper.dtb \
ARM: dts: am335x: Add Chiliboard DTS Chiliboard uses ChiliSOM as its base. Hardware specification: * ChiliSOM (am335x, PMIC, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * microSD slot * 2x GPIO LED Signed-off-by: Rostislav Lisovy <lisovy@jablotron.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-09 21:48:05 +07:00
am335x-lxm.dtb \
ARM: dts: Add phyBOARD-WEGA-AM335x rdk phyBOARD-WEGA-AM335x represents a direct soldered combination of a phyCORE-AM335x SoM and carrier board. Different kind of SoM options can be connected to the wega carrier board. So we created a separate wega dtsi file. The final dts contains the actual SoM on the carrier board. WEGA carrier board features: * ETH phy on carrier board: 1x MII * 1x CAN * 2x UART * USB0 (device) * USB1 (host) * mSD slot Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-16 15:30:49 +07:00
am335x-chiliboard.dtb \
am335x-wega-rdk.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-duovero-parlor.dtb \
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 11:11:45 +07:00
omap4-panda.dtb \
ARM: dts: Add build target for omap4-panda-a4 Commit 0d9250c (ARM: dts: omap4-panda: Add pinmux configuration for HDMI) added a new device-tree source file for Rev A4 of the OMAP4430 Panda board but it did not add this version to the makefile. Hence, add this file to the makefile. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-15 04:55:39 +07:00
omap4-panda-a4.dtb \
ARM: dts: OMAP: Rename pandaES and var_som for consistency Rename the files to have names consistent across OMAP boards. Update the Makefile to use the new name. Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-24 17:31:34 +07:00
omap4-panda-es.dtb \
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 11:11:45 +07:00
omap4-sdp.dtb \
ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs target When making the dtbs target on OMAP/AM35xx, some trees are not built. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-05-31 21:05:51 +07:00
omap4-sdp-es23plus.dtb \
ARM: dts: Add support for OMAP4 VAR-DVK-OM44 Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-13 01:32:01 +07:00
omap4-var-dvk-om44.dtb \
ARM: dts: Add support for OMAP4 Variscite OM44 family Add support for VAR-SOM-OM44[1] SODIMM system on module from Variscite. SoM features a OMAP4460, 1GB RAM, Gigabit Ethernet (LAN7500) and optional WLAN/BT. Also add support for VAR-STK-OM44 development board from Variscite. This kit features a VAR-SOM-OM44 and the carrier board VAR-OM44CustomBoard[2]. The VAR-STK-OM44 is the same as VAR-DVK-OM44 but without the LCD display. omap4-var-stk-om44.dts replace the old and very limited omap4-var-som.dts. [1] http://www.variscite.com/products/system-on-module-som/cortex-a9/var-som-om44-cpu-ti-omap-4-omap4460 [2] http://www.variscite.com/products/single-board-computers/var-om44customboard Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-13 01:32:00 +07:00
omap4-var-stk-om44.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_AM43XX) += \
am43x-epos-evm.dtb \
ARM: dts: add support for AM437x StarterKit Add support for TI's AM437x StarterKit Evaluation Module. Cc: Josh Elliot <jelliott@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Tested-by: Franklin Cooper Jr. <fcooper@ti.com> Tested-by: Tom Rini <trini@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-06-24 01:20:59 +07:00
am437x-sk-evm.dtb \
ARM: dts: add support for AM437x IDK The AM437x Industrial Development Kit (IDK) is an application development platform targeted at industrial communication and control applications. It comes with a 3-phase motor driver, PROFINET, PROFIBUS and a few other industrial communication interfaces. The board has 1GiB of DDR3 RAM, QSPI NOR flash, a 100% discrete power design (no PMIC) and an on-board 2MP camera (not supported with Linux as of this writing). Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 05:30:14 +07:00
am437x-idk-evm.dtb \
ARM: dts: Only build OMAP dtb if associated SoC is built With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-04 07:11:37 +07:00
am437x-gp-evm.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_OMAP5) += \
omap5-cm-t54.dtb \
ARM: dts: sbc-t54: add support for sbc-t54 with cm-t54 Add support for CM-T54 CoM and SBC-T54 board: http://compulab.co.il/products/computer-on-modules/cm-t54/ http://compulab.co.il/products/sbcs/sbc-t54/ SBC-T54 is a single board computer based on OMAP5432 CPU. It is implemented with a CM-T54 CoM providing most of the functions, and SB-T54 carrier board providing connectors and several additional functions. Added basic support for: * PMIC * LED * MMC/SD * eMMC * USB * I2C1/4 * SB-T54 and CM-T54 EEPROMs * RTC Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> [tony@atomide.com: updated for Makefile sorting] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-28 18:41:44 +07:00
omap5-sbc-t54.dtb \
omap5-uevm.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_SOC_DRA7XX) += \
dra7-evm.dtb \
ARM: dts: Add am57xx-beagle-x15 BeagleBoard-X15 is the next generation Open Source Hardware BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15 processor. The platform features 2GB DDR3L (w/dual 32bit busses), eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G Ethernet. For more information, refer to: BeagleBoard-X15 Wiki: http://www.elinux.org/Beagleboard:BeagleBoard-X15 AM5728 is part of the Sitara product family whose additional details will be available: http://www.ti.com/lsds/ti/arm/overview.page Technical Reference Manual for AM5728 is public domain at: http://www.ti.com/lit/spruhz6 Just add basic support for the moment, the following updates are needed: i) Ethernet - depends on SoC dts fixes ii) USB Client (USB2) - depends on GPIO extcon ii) HDMI - additional driver fixes pending iii) Audio - additional driver fixes pending NOTE: AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All unused power supply balls must be supplied with the voltages specified in the Section 5.2, Recommended Operating Conditions". This implies that all unused voltage rails for AM5728 can never be switched off even if the hardware blocks inside that voltage domain is unused. Switching off these unused rails may result in stability issues on other domains and increased leakage and power-on-hour impacts. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-08 00:47:13 +07:00
am57xx-beagle-x15.dtb \
ARM: dts: Add support for DRA72x family of devices DRA722 is part of DRA72x family which are single core cortex A15 devices with most infrastructure IPs otherwise same as whats on the DRA74x family. So move the cpu nodes into dra74x.dtsi and dra72x.dtsi respectively. Also add a minimal dra72-evm dts file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: linux-doc@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> [tony@atomide.com: updated for Makefile sorting] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-29 18:05:10 +07:00
dra72-evm.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-lacie-d2-network.dtb \
ARM: orion5x: convert d2net to Device Tree This commit converts the LaCie d2 Network platform to the Device Tree. All devices except LEDs are converted, because the LED code needs a non-LED GPIO to be set to a given value for the LEDs to work, and this cannot yet be easily represented in DT. Also, references to the LaCie Big Disk Network platform are lost, because this platform apparently has exactly the same hardware support as the LaCie d2 Network, so their Device Tree files would be identical. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1398202002-28530-36-git-send-email-thomas.petazzoni@free-electrons.com Cc: Simon Guinot <sguinot@lacie.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-23 04:26:39 +07:00
orion5x-lacie-ethernet-disk-mini-v2.dtb \
ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree This commit converts the Maxtor Shared Storage II Orion5x platform to the Device Tree. The only remaining things not converted are PCI and the special power off method. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1398202002-28530-37-git-send-email-thomas.petazzoni@free-electrons.com Cc: Sylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-23 04:26:40 +07:00
orion5x-maxtor-shared-storage-2.dtb \
ARM: orion5x: convert RD-88F5182 to Device Tree This commit converts the RD-88F5182 platform to the Device Tree. All devices except the PCI are converted to the Device Tree. It is worth noting that: * The PCI description for the DT case is kept in board-rd88f5182.c. * The existing non-DT support in rd88f5182-setup.c is kept as is, in order to allow testing of a given platform in both DT and non-DT cases. It will ultimately be removed, once we no longer care about non-DT support for Orion5x. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1398202002-28530-35-git-send-email-thomas.petazzoni@free-electrons.com Cc: Ronen Shitrit <rshitrit@marvell.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-23 04:26:38 +07:00
orion5x-rd88f5182-nas.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees Add basic APQ8064 SoC include device tree and support for basic booting on the IFC6410 board. Also, keep dtb build list and qcom_dt_match in sorted order. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-04-04 02:48:22 +07:00
dtb-$(CONFIG_ARCH_QCOM) += \
ARM: dts: qcom: add CM-QS600 board CM-QS600 is a APQ8064 based computer on module. The details are available at http://compulab.co.il/products/computer-on-modules/cm-qs600/ Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-10-01 23:09:11 +07:00
qcom-apq8064-cm-qs600.dtb \
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees Add basic APQ8064 SoC include device tree and support for basic booting on the IFC6410 board. Also, keep dtb build list and qcom_dt_match in sorted order. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-04-04 02:48:22 +07:00
qcom-apq8064-ifc6410.dtb \
qcom-apq8074-dragonboard.dtb \
ARM: dts: qcom: Add initial IFC6540 board device tree Add basic support for the IFC6540 single-board computer boards, that are based on the APQ8084 SoC. This patch adds the initial device tree and the neccessary nodes required for enabling the serial port and eMMC. Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-09-03 23:50:31 +07:00
qcom-apq8084-ifc6540.dtb \
ARM: dts: qcom: Add APQ8084-MTP board support Add device-tree file for APQ8084-MTP board, which belongs to the Snapdragon 805 family. Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-05-23 22:12:30 +07:00
qcom-apq8084-mtp.dtb \
ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees Add basic IPQ8064 SoC include device tree and support for basic booting on the AP148 Reference board with support for UART, I2C, and SPI. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-03-07 23:56:59 +07:00
qcom-ipq8064-ap148.dtb \
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees Add basic APQ8064 SoC include device tree and support for basic booting on the IFC6410 board. Also, keep dtb build list and qcom_dt_match in sorted order. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-04-04 02:48:22 +07:00
qcom-msm8660-surf.dtb \
ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone This DTS has support for the Sony Xperia Z1 phone (codenamed Honami). This first version of the DTS supports just a serial console. Signed-off-by: Tim Bird <tim.bird@sonymobile.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-10-01 05:49:49 +07:00
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-pb1176.dtb
ARM: dts: Build dtbs for Rockchip boards This allows the "make dtbs" target to work. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 05:17:50 +07:00
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-bqcurie2.dtb \
ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066 This patch adds initial support for the Marsboard RK3066. It enables EMAC Rockchip which is the ethernet support on the board and registers it as a supported rockchip platform. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-02 17:20:01 +07:00
rk3066a-marsboard.dtb \
ARM: dts: rockchip: add dts for ChipSPARK Rayeager PX2 board This add support for Rayeager PX2, Rockchip PX2 based development board made by ChipSPARK. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> Tested-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-25 19:39:36 +07:00
rk3066a-rayeager.dtb \
ARM: dts: Build dtbs for Rockchip boards This allows the "make dtbs" target to work. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 05:17:50 +07:00
rk3188-radxarock.dtb \
rk3288-evb-act8846.dtb \
ARM: dts: rockchip: add dts for Firefly Firefly-RK3288 boards This adds support for Firefly-RK3288, Rockchip RK3288 based development boards made by Firefly. There are 2 dts for 2 versions of the board. rk3288-firefly-beta.dts is for the beta version, rk3288-firefly.dts is for the mass production version. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> [removed gmac reference, due to the gmac node going through the net-tree] Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-25 19:39:35 +07:00
rk3288-evb-rk808.dtb \
rk3288-firefly-beta.dtb \
rk3288-firefly.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_S3C24XX) += \
s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += \
s3c6410-mini6410.dtb \
ARM: dts: Add dts file for S3C6410-based SMDK6410 board This patch adds basic device tree sources for SAMSUNG SMDK6410 board based on SAMSUNG S3C6410 SoC. Currently only UARTs, SD channel 0 and 100Mbps ethernet (SMSC911x) are supported. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-26 00:38:41 +07:00
s3c6410-smdk6410.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_S5PV210) += \
s5pv210-aquila.dtb \
ARM: dts: Add Device tree for s5pc110/s5pv210 boards Add DTS for s5pc110 boards: goni, aquila, smdkc110 s5pv210: smdkv210, tiny210, torbreck Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [t.figa: Rebased, fixed merge conflicts, neatened.] Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-09-28 23:25:30 +07:00
s5pv210-goni.dtb \
s5pv210-smdkc110.dtb \
s5pv210-smdkv210.dtb \
s5pv210-torbreck.dtb
ARM: shmobile: r7s72100: Remove r7s72100-genmai.dtb for ARCH_SHMOBILE_LEGACY Forgotten by commit ad8c3af8b75ff26c ("ARM: shmobile: r7s72100: Remove legacy board support"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-03 21:55:52 +07:00
dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 11:11:45 +07:00
r8a7740-armadillo800eva.dtb \
ARM: shmobile: add R-Car M1A Bock-W platform support Add basic Bock-W board support More devices will be added on top of this patch after PICNTRL and clock framework are in better shape. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 17:03:38 +07:00
r8a7778-bockw.dtb \
ARM: shmobile: bockw: add DT reference This patch adds a sample DT-based Bock-W "reference" implementation. The use of platform-specific C-code should be avoided with this configuration as much as possible. This patch adds new r8a7778_add_dt_devices() which was same stance of r8a7790_add_dt_devices() Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24 14:36:51 +07:00
r8a7778-bockw-reference.dtb \
ARM: shmobile: marzen: Add r8a7779-marzen.dtb This is in preparation for converting the marzen board to use DT_MACHINE_START. Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-26 07:36:16 +07:00
r8a7779-marzen.dtb \
ARM: shmobile: kzm9g-reference: Remove board C code and DT file Now that the sh73a0 generic multiplatform case has the same feature set as the kzm9g DT reference board code, we get rid of the latter. DT reference code in the future shall make use of the sh73a0 multiplatform support code with the generic SoC machine vector. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 05:10:05 +07:00
sh73a0-kzm9g.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
emev2-kzm9d.dtb \
ARM: shmobile: Let Genmai multiplatform boot with Genmai DTB Let the multiplatform Genmai support boot with the unified DTS. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-16 19:10:15 +07:00
r7s72100-genmai.dtb \
ARM: shmobile: r8a73a4: Add r8a73a4-ape6evm.dtb to ARCH_SHMOBILE_MULTI Makes sure the dtb is built for multiplatform builds. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-17 23:18:18 +07:00
r8a73a4-ape6evm.dtb \
ARM: shmobile: armadillo800eva: Build DTS for multiplatform Build the r8a7740 Armadillo800EVA board DTB in case of Multiplatform. The DT reference case will be removed and can be ignored for now. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-28 10:35:01 +07:00
r8a7740-armadillo800eva.dtb \
ARM: shmobile: r8a7778: enable multiplatform target Adds config option and enables DTB building. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-26 23:42:13 +07:00
r8a7778-bockw.dtb \
ARM: dts: Sort SHMOBILE dtbs alphabetically Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [horms+renesas@verge.net.au: update for addition of r8a7794-alt.dtb] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-28 19:00:43 +07:00
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
ARM: shmobile: henninger: initial device tree Add the initial device tree for the R8A7791 SoC based Henninger board. SCIF0 serial port support is included, so that the serial console can work. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-25 05:42:41 +07:00
r8a7791-henninger.dtb \
ARM: shmobile: Let Koelsch multiplatform boot with Koelsch DTB Let the multiplatform Koelsch support boot with the legacy DTS for Koelsch as well as the Koelsch reference DTS. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-11 21:13:59 +07:00
r8a7791-koelsch.dtb \
ARM: shmobile: kzm9g: Build DTS for Multiplatform Build the sh73a0 KZM9G board DTB in case of Multiplatform. The DT reference case will be removed in the future and can be ignored for now. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-09 20:08:52 +07:00
r8a7794-alt.dtb \
sh73a0-kzm9g.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
ARM: socfpga: dts: rename socdk board file to socdk_sdmmc Rename the socfpga_arria10_socdk board file to socfpga_arria10_socdk_sdmmc as Arria 10 devkit cannot support SDMMC and QSPI at the same time. Thus we will need to have 2 separate board files, one for SDMMC and one for QSPI. We also add a new base board dtsi file, socfpga_arria10_socdk.dtsi so that we use common peripherals for each flavor of the devkits. Add the sdmmc node to the socfpga_arria10_socdk_sdmmc.dts board file. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-10 10:57:04 +07:00
socfpga_arria10_socdk_sdmmc.dtb \
dts: socfpga: Add support for Altera's SOCFPGA Arria V board Add support for a new SOCFPGA board that has an Arria V FPGA along with dual ARM Cortex-A9 cores. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Cc: Pavel Machek <pavel@denx.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: devicetree@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org
2013-09-26 03:38:20 +07:00
socfpga_cyclone5_socdk.dtb \
ARM: socfpga: dts: Add support for terasic SoCkit This adds basic support for the terasic SoCkit board. The board includes an Altera Cyclone 5 SoC. [Dinh Nguyen] - Changed to 115200 for baudrate in dts bootargs Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2013-10-07 22:41:32 +07:00
socfpga_cyclone5_sockit.dtb \
ARM: socfpga: dts: add support for EBV SOCrates The SOCrates is a SOCFpga-Cyclone5 based board from EBV. Add support for it. Reviewed-by: Pavel Machek <pavel@denx.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-04-02 23:13:11 +07:00
socfpga_cyclone5_socrates.dtb \
arm: socfpga: Add entries to enable make dtbs socfpga Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Tested-by: Pavel Machek <pavel@denx.de> Reviewed-by: Pavel Machek <pavel@denx.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Pavel Machek <pavel@denx.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-12 06:30:31 +07:00
socfpga_vt.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_SPEAR13XX) += \
spear1310-evb.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
spear1340-evb.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_SPEAR3XX) += \
spear300-evb.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
spear310-evb.dtb \
ARM: SPEAr320: DT: Add SPEAr 320 HMI board support This adds support for SPEAr320-HMI board. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-08-09 06:20:11 +07:00
spear320-evb.dtb \
spear320-hmi.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_SPEAR6XX) += \
spear600-evb.dtb
dtb-$(CONFIG_ARCH_STI) += \
stih407-b2120.dtb \
ARM: STi: DT: STiH410: Add STiH410 SoC and b2120 board support. The STiH410 is an advanced multi-HD AVC processor with 3D graphics acceleration and 1.5-GHz ARM Cortex-A9 SMP CPU part of the stih407 family. It has wide connectivity including USB 3.0, PCI-e, SATA and gigabit ethernet. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-17 23:48:00 +07:00
stih410-b2120.dtb \
ARM: dts: STiH407: Add B2120 board support B2120 HDK is the reference board for STiH407 SoC. It has the following characteristics: - 1GB DDR3 - 8GB eMMC / SD-Card slot - 32MB NOR Flash - 1 x Gbit Ethernet - 1 x USB 3.0 port - 1 x Mini-PCIe - 1 x SATA - 1 x HDMI output - 1 x HDMI input - 1 x SPDIF This patch only introduces basic functionnalities, such as I2C and UART. Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-02-27 19:33:27 +07:00
stih415-b2000.dtb \
ARM: stih41x: Add B2020 board support B2020 ADI board is reference board for STIH415/416 SOCs, it has 2 x UART, 4x USB, 1 x Ethernet, 1 x SATA, 1 x PCIe, and 2GB RAM with standard set-top box IPs. This patch adds initial support to B2020 with STiH415/416 with SBC_UART1 as console and a heard beat LED. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Stuart Menefy <stuart.menefy@st.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:16:13 +07:00
stih415-b2020.dtb \
ARM: dts: Sort STi boards in Makefile The boards have to be sorted in alphanumerical order in the Makefile. Cc: Olof Johansson <olof@lixom.net> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-05-20 16:01:53 +07:00
stih416-b2000.dtb \
ARM: sti: stih416: Add support for B2020 RevE The B2020 RevE differs from the other B2020 boards in a few subtle ways; including the Ethernet reset GPIO which this patch adds support for and the LED wiring which will follow in a latter patch. Without supplying these differences Ethernet and the board LEDs simply will not work. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-05-21 15:45:00 +07:00
stih416-b2020.dtb \
ARM: dts: STiH418: Add B2199 board support B2199 HDK is the reference board for STiH418 SoC. It has the following characteristics: - 3GB DDR3 - 8GB eMMC / SD-Card slot - 32MB NOR Flash - 1 x Gbit Ethernet - 1 x USB3.0 port - 2 x USB2.0 ports - 1 x Sata or Mini-PCIe port - 1 x WiFi 802.11ac (Quantenna) - 1 x HDMI out - 1 x HDMI in - 1 x SPDIF Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-01-09 22:11:00 +07:00
stih416-b2020e.dtb \
stih418-b2199.dtb
ARM: dts: Introduce STM32F429 MCU The STMicrolectornics's STM32F429 MCU has the following main features: - Cortex-M4 core running up to @180MHz - 2MB internal flash, 256KBytes internal RAM - FMC controller to connect SDRAM, NOR and NAND memories - SD/MMC/SDIO support - Ethernet controller - USB OTFG FS & HS controllers - I2C, SPI, CAN busses support - Several 16 & 32 bits general purpose timers - Serial Audio interface - LCD controller Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-06-03 21:54:02 +07:00
dtb-$(CONFIG_ARCH_STM32)+= stm32f429-disco.dtb
ARM: sunxi: dt: build DTs according to new MACH_SUNxI Kconfig symbols Allwinner sunxi support has been split into the various SoCs in Kconfig. Adapt the new symbols for the device trees. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-17 20:11:20 +07:00
dtb-$(CONFIG_MACH_SUN4I) += \
ARM: sunxi: dt: Add device tree for Mele A1000 This adds a device tree usable on Mele A1000 (and A2000, as it apparently is the same device except for the case). This device features one UART port, Ethernet, an AXP209 PMU on i2c0 and two user configurable LEDs. Signed-off-by: Emilio López <emilio@elopez.com.ar> [maxime: fixed the soc node address] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-14 06:18:21 +07:00
sun4i-a10-a1000.dtb \
ARM: dts: sun4i: Add new ba10-tvbox board The ba10 tvbox is an A10 based android tvbox, with 512M RAM, 8G nand flash, rtl8188ctv usb wifi 1 USB-A receptacle hooked up to an EHCI/OHCI controller, 1 USB-A receptacle hooked up to the OTG and 100Mbit ethernet using a rtl8201 phy. The PCB is labelled ba10 hence I've named the board ba10-tvbox. It is used in noname allwinner A10 tv-boxes. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-01 04:57:57 +07:00
sun4i-a10-ba10-tvbox.dtb \
ARM: dts: sun4i: Add dts file for Chuwi V7 CW0825 tablet The Chuwi V7 is an A10 (sun4i) based tablet with 1G of RAM, 16G of nand flash, microsd slot, 7" 1024x768 lvds ips panel, mini hdmi out, headphones out, stereo speakers, front & back camera and usb wifi. It is clearly marked "CHUWI", "V7" and "Model: CW0825" on the back of the tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-18 19:08:20 +07:00
sun4i-a10-chuwi-v7-cw0825.dtb \
ARM: sunxi: Fix Mini X-plus device tree build Commit b00adbe0 ("ARM: sunxi: Rename uart nodes to serial") changed the node names in the DTSI, changes that were not accordingly made to the Mini X-Plus device tree. This breakage slipped through because it was not properly declared in the Makefile. Fix both issues. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-19 03:44:29 +07:00
sun4i-a10-cubieboard.dtb \
ARM: dts: sun4i: Add initial dts for Gemei G9 tablet Gemei G9 is an A10 based tablet, with 1G RAM, 16G NAND, 1024x768 IPS LCD display, stereo speakers, 1.3MP front camera and 5 MP rear camera, 8000mAh battery, GT901 2+1 touchscreen, Bosch BMA250 accelerometer and RTL8188CUS USB wifi. It also has MicroSD slot, miniHDMI, 1 x MicroUSB OTG port and 1 x MicroUSB host port and 3.5mm headphone jack. Changes since v2: * Fix syntax error (brown paper bag release) Changes since v1: * Added sun4i-lradc keymap * Added TODO note about missing IRQ pins for bma250 * Fixed formatting issues and removed external URLs Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-27 01:00:06 +07:00
sun4i-a10-gemei-g9.dtb \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
sun4i-a10-inet97fv2.dtb \
ARM: dts: sun7i: Add dts file for the Jesurun Q5 top set box The Jesurun Q5 has a black plastic casing with the approximate dimensions of 100mm x 100mm x 24mm with rounded edges. In terms of hardware it features an Allwinner A10 SoC with 1GB RAM and 8GB of NAND flash. The external connectors are: 2x USB-A female supporting USB2.0, 3.5mm female jack for audio, HDMI female, SPDIF, RJ45 LAN and Power. In addition the device has 1x red LED (hard wired to power) and an programmable green led. On the board there is also an unpopulated IR receiver and the UART. The devices is equipped with an AXP209 PMU. For more details see: http://linux-sunxi.org/Jesurun_Q5 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-23 19:26:50 +07:00
sun4i-a10-jesurun-q5.dtb \
ARM: dts: sun4i: Add Marsboard A10 board This patch add support for Marsboard A10 board. The Marsboard A10 is a A10 based development board with 1G RAM, 1G NAND, micro SD card slot, SATA 2.0 socket, 10/100 ethernet, mini HDMI port, 1 USB OTG port and 2 USB 2.0 ports. Board does not use the AXP209 pmic, it does not have a pmic at all. Board also have 2 expansion 70 pin headers. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21 01:03:28 +07:00
sun4i-a10-marsboard.dtb \
ARM: sunxi: Fix Mini X-plus device tree build Commit b00adbe0 ("ARM: sunxi: Rename uart nodes to serial") changed the node names in the DTSI, changes that were not accordingly made to the Mini X-Plus device tree. This breakage slipped through because it was not properly declared in the Makefile. Fix both issues. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-19 03:44:29 +07:00
sun4i-a10-mini-xplus.dtb \
ARM: dts: sun4i: Add mk802 board The mk802 is the "classic" Allwinner A10 based hdmi tv-stick, it features 512M or 1G RAM, 4G nand, a mini-hdmi female connector, USB-A receptacle, mini-usb receptacle (OTG) and USB-wifi. Somewhat unique the mk802 does not use the AXP209 pmic, it does not have a pmic at all. For more details see: http://linux-sunxi.org/Rikomagic_mk802 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-18 19:09:43 +07:00
sun4i-a10-mk802.dtb \
ARM: dts: sun4i: Add mk802ii board The mk802ii is a revised version of the mk802 A10 based hdmi tv-stick, it features 1G RAM, 4G nand, a hdmi male connector, USB-A receptacle, 2 micro usb receptacles (OTG & power) and USB-wifi, and does come with an axp209 pmic. For more details see: http://linux-sunxi.org/Rikomagic_mk802ii Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-18 19:09:44 +07:00
sun4i-a10-mk802ii.dtb \
ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board This add support for the A10-OLinuXino-LIME: https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME A low cost Allwinner A10 based dev-board, with sata, ethernet, hdmi and 2x USB. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-02 02:26:37 +07:00
sun4i-a10-olinuxino-lime.dtb \
ARM: sunxi: dt: build DTs according to new MACH_SUNxI Kconfig symbols Allwinner sunxi support has been split into the various SoCs in Kconfig. Adapt the new symbols for the device trees. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-17 20:11:20 +07:00
sun4i-a10-pcduino.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
ARM: dts: sun5i: Add new Auxtek-t004 board The auxtek-t004: http://www.fasttech.com/products/1110/10004200/1318603-auxtek-t004-allwinner-a10s-single-core-android-ics Is an Allwinner A10s based hdmi tv stick with with 512M RAM, 4G nand flash, toc9002 (bcm43362) sdio wifi, 1 USB host ports using an USB-A receptacle and a 2 micro-usb receptacles, one for power and one for USB OTG. The sdio wifi appears to not have an oob irq hooked up, so we rely on sdio-irq support for it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-03-08 02:01:21 +07:00
sun5i-a10s-auxtek-t004.dtb \
ARM: dts: sun5i: Add mk802_a10s board The mk802_a10s re-uses is the "classic" mk802 case and functionality, but has an A10s SoC inside rather then the A10, it features 512M or 1G RAM, 4G nand, a mini-hdmi female connector, USB-A receptacle, mini-usb receptacle (OTG) and a sdio realtek wifi chip. Unlike the original mk802 it does have a pmic, the axp152. For more details see: http://linux-sunxi.org/Semitime_g2 Signed-off-by: Hans de Goede <hdegoede@redhat.com> [Maxime: Changed the compatible and node names labels] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-18 19:09:45 +07:00
sun5i-a10s-mk802.dtb \
ARM: sunxi: Add Olimex A10s-Olinuxino-micro device tree Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Acked-by: Emilio López <emilio@elopez.com.ar>
2013-06-09 15:41:22 +07:00
sun5i-a10s-olinuxino-micro.dtb \
ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board The R7 tv-dongle is an A10s based hdmi tv dongle, with 1G RAM, 4G nand flash, and rtl8189es sdio wifi. It has a standard male hdmi connector, an USB host port using an USB-A receptacle and a micro-usb receptacle for both power and USB OTG. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-12 19:11:06 +07:00
sun5i-a10s-r7-tv-dongle.dtb \
ARM: dts: sun5i: Add DT for HSG H702 tablet board This is a Q8 format 7 inch tablet with an Allwinner A13 SoC. It has 512MB DRAM, 4GB NAND flash, an accelerometer, camera, RTL8188-based WiFi, and micro SD slot for external storage. It is likely made by a subsidiary of Hanns.G (Hannstar). Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-09-16 23:04:46 +07:00
sun5i-a13-hsg-h702.dtb \
ARM: sun6i: Add WITS Colombus A31 evaluation kit support This platform from WITS is the evaluation board for the Allwinner A31. It features a quad-Cortex A7, 2048MB of RAM, NAND, USB, MMC, several UART, HDMI, a 2048 x 1536 10" screen, powered by a PowerVR, etc. Of course, most of these peripherals aren't supported yet, but support for those will come eventually. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-06-23 01:22:14 +07:00
sun5i-a13-olinuxino.dtb \
ARM: dts: sun5i: Add new Utoo P66 board The UTOO P66 is a 6" A13 tablet / lcd ereader. It features a 6" 480x800 ips lcd screen, 512MB RAM & 4GB emmc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-03-08 02:01:22 +07:00
sun5i-a13-olinuxino-micro.dtb \
sun5i-a13-utoo-p66.dtb
ARM: sunxi: dt: build DTs according to new MACH_SUNxI Kconfig symbols Allwinner sunxi support has been split into the various SoCs in Kconfig. Adapt the new symbols for the device trees. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-17 20:11:20 +07:00
dtb-$(CONFIG_MACH_SUN6I) += \
ARM: sunxi: dt: add APP4-EVB1 board support The APP4 EVB1 development boards embeds an A31, together with some NAND, one SD card slot, and one SDIO + UART WiFi and Bluetooth chip, a few I2C buses, USB, and a LCD display. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2014-05-13 22:44:22 +07:00
sun6i-a31-app4-evb1.dtb \
ARM: sun7i: Add Olimex A20-Olinuxino-Micro support The Olimex A20-Olinuxino is an open-hardware board based on the Allwinner A20 SoC, with most of the pins exported on headers, a 10/100M ethernet port, SATA, SD and uSD slots, etc. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-07-17 15:12:16 +07:00
sun6i-a31-colombus.dtb \
ARM: dts: sun6i: Add Merrii A31 Hummingbird support This adds support for the A31 Hummingbird: http://www.merrii.com/en/pla_d.asp?id=172 The Merrii A31 Hummingbird is a development board based on the Allwinner A31 SoC with multiple USB ports through a USB hub chip, a uSD slot, a 10/100/1000M ethernet port, an AP6210 WiFi/BT chip, TV-in, HDMI, VGA, audio in/out ports, and LCD/CSI headers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: enable usbphy, ehci0, ohci0 for on-board usb hub; add pcf8563 rtc node; add comments for i2c0 and mmc0 pull-ups; correct ethernet phy address to 0x01; drop uart2 (BT chip has no power) and uart3 (no device); use proper commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2014-07-16 00:15:47 +07:00
sun6i-a31-hummingbird.dtb \
ARM: sun6i: dt: Add new Mele I7 device The Mele I7 is a Allwinner A31 based Android TV box, with 1G RAM, 8GB NAND flash, a RTL8188etv wifi chip, 3 USB Host ports using USB-A receptacles, a micro USB-B receptacle for USB OTG, HDMI out, a TRS connector for A/V, SPDIF and IrDA. This patch adds basic support for the device, more information can be found here (http://linux-sunxi.org/Mele_I7). Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-02-28 20:48:05 +07:00
sun6i-a31-i7.dtb \
ARM: dts: sun6i: Add dts file for CSQ CS908 board The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND, rtl8188etv usb wifi, 2 USB A receptacles (1 connected through the OTG controller), ethernet, 3.5 mm jack with a/v out and hdmi out. Note it has no sdcard slot and therefore can only be fel booted. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-12-29 18:09:26 +07:00
sun6i-a31-m9.dtb \
ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using the same dts for both models. Unfortunately this does not work for the otg controller, on the M9 this is routed to a micro-usb connector on the outside, while as on the A1000G-quad it is connected to an usb to sata bridge (which is not populated on the M9 pcb). This commit adds a new dts for the Mele-A1000G-quad to allow using different otg controller settings on the 2 boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-01 22:02:59 +07:00
sun6i-a31-mele-a1000g-quad.dtb \
ARM: dts: sun6i: Add dts file for CSQ CS908 board The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND, rtl8188etv usb wifi, 2 USB A receptacles (1 connected through the OTG controller), ethernet, 3.5 mm jack with a/v out and hdmi out. Note it has no sdcard slot and therefore can only be fel booted. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-12-29 18:09:26 +07:00
sun6i-a31s-cs908.dtb
ARM: sunxi: dt: build DTs according to new MACH_SUNxI Kconfig symbols Allwinner sunxi support has been split into the various SoCs in Kconfig. Adapt the new symbols for the device trees. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-17 20:11:20 +07:00
dtb-$(CONFIG_MACH_SUN7I) += \
ARM: dts: sun7i: Add Banana Pi board The Banana Pi is an A20 based development board using Raspberry Pi compatible IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi and stereo audio out + various expenansion headers: http://www.lemaker.org/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-10-01 14:26:06 +07:00
sun7i-a20-bananapi.dtb \
ARM: dts: sun7i: Add dts file for Bananapro board Add support for the new Bananapro A20 development board from lemaker.org. This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver, 3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-18 19:08:19 +07:00
sun7i-a20-bananapro.dtb \
ARM: sun7i: Add Cubieboard2 Device Tree The Cubieboard2 is the successor of the first Cubieboard, and shares the same hardware, except that the Allwinner A10 found initially has been replaced by an Allwinner A20. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-07-25 17:19:16 +07:00
sun7i-a20-cubieboard2.dtb \
ARM: sunxi: dts: Add support for the cubieboard3, the CubieTruck Cubietech introduced a new cubieboard, the CubieTruck. This board added more output connectors and features 2 GiB of RAM and a Gigabit PHY. Tested are are uart0 and LEDS which both work as expected. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-10-08 15:22:32 +07:00
sun7i-a20-cubietruck.dtb \
ARM: dts: sun7i: Add Merrii A20 Hummingbird board This adds support for the A20 Hummingbird: http://www.merrii.com/en/pla_d.asp?id=171 This patch enable most on-board peripherals supported on current kernel, such as uart, i2c, spi, pwm, ohci/ehci, gmac and mmc. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Wills Wang <wills.wang.open@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-19 14:33:01 +07:00
sun7i-a20-hummingbird.dtb \
ARM: dts: sun7i: Add new i12-tvbox board The i12 tvbox is an A20 based android tvbox, with 512M / 1G RAM, 4G nand flash, ap6210 or ap6330 sdio wifi + bt (broadcom sdio wifi + uart attached brcm bt), 2USB host ports using USB-A receptacles and a micro-usb receptacle for USB OTG, and 100Mbit ethernet using an IP101a phy. The PCB is labelled i12-a20 hence I've named the board i12-a20. It is used in noname allwinner A20 tv-boxes, which are sometimes sold with Q5 or QT840A as product name. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-22 00:43:31 +07:00
sun7i-a20-i12-tvbox.dtb \
ARM: dts: sun7i: Add Mele M3 board The Mele M3 is yet another Allwinnner based Android top set box from Mele. It uses a housing similar to the A2000, but without the USM sata storage slot at the top. It features an A20 SoC, 1G RAM, 4G eMMC (unique for Allwinner devices), 100Mbit ethernet, HDMI out, 3 USB A receptacles, VGA, and A/V OUT connections. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-10-01 21:25:37 +07:00
sun7i-a20-m3.dtb \
ARM: sun7i: dt: Add new MK808C device The MK808C is an A20 based android stick, with 1G RAM, 8G NAND flash, a RTL8723au wifi + bt combo chip, a USB host ports using USB-A receptacles, a mini USB-B receptacle for USB OTG, mini HDMI and a TRS connector for AV. This patch adds basic support for the device, more information can be found here (http://linux-sunxi.org/MK808C). Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-29 01:01:06 +07:00
sun7i-a20-mk808c.dtb \
ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME This patch adds support for Olimex A20-OLinuXino-LIME board. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-20 12:25:03 +07:00
sun7i-a20-olinuxino-lime.dtb \
ARM: sun7i: add support for A20-OLinuXino-Lime2 This adds support for the Olimex A20-OLinuXino-Lime2 https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2 Differences to previous Lime boards are 1GB RAM and gigabit ethernet Signed-off-by: Iain Paton <ipaton0@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-10-10 20:15:24 +07:00
sun7i-a20-olinuxino-lime2.dtb \
ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3 The LinkSprite pcDuino V3 is an A20 based development board featuring arduino compatible io headers, 1G RAM, 4G nand, sata, rtl8188cus usb wifi and 100 Mbit ethernet using an ip101a phy: http://www.pcduino.com/pcduino-v3/ Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> [hdegoede@redhat.com: Various cleanups, correct led pins] [hdegoede@redhat.com: Add axp209, ir and gpio-keys nodes] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-01 04:57:56 +07:00
sun7i-a20-olinuxino-micro.dtb \
ARM: dts: sun7i: Add dts file for the Orangepi SBC The Orangepi is a development board using the Allwinner A20 SoC, with 1G RAM, microsd slot, HDMI, 1Gbit ethernet, USB wifi, Micro USB (otg), sata, 4 USB A ports, ir receiver and a headphones jack. Also see: http://linux-sunxi.org/Xunlong_Orange_Pi http://www.orangepi.org/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> [maxime: Added /chosen/stdout-path] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-04 15:59:53 +07:00
sun7i-a20-orangepi.dtb \
ARM: dts: sun7i: Add dts file for the Orangepi mini SBC The Orangepi mini is a development board using the Allwinner A20 SoC, with 1G RAM, 2 microsd slots (use the top side one for booting), HDMI, 1Gbit ethernet, USB wifi, Micro USB (otg), sata, 4 USB A ports, ir receiver and a headphones jack. Also see: http://linux-sunxi.org/Xunlong_Orange_Pi_Mini http://www.orangepi.org/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> [maxime: Added /chosen/stdout-path] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-04 15:59:54 +07:00
sun7i-a20-orangepi-mini.dtb \
ARM: dts: sun7i: Add dts file for pcDuino 3 Nano board Add support for the LinkSprite pcDuino 3 Nano board. This is a low-cost Allwinner A20 board with Arduino-style GPIO headers; it features 1G RAM, 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro USB socket for OTG and another for power in, HDMI, SATA, 5V power for SATA devices, gigabit Ethernet, an IR receiver, 3.5mm audio out and a MIPI camera connector. For more details, see: http://linux-sunxi.org/LinkSprite_pcDuino3_Nano Changes in v3: - rename LEDs to pcduino3-nano:green:usr[12] - remove optional features on Arduino headers (i2c2, spi0, uart2) Signed-off-by: Adam Sampson <ats@offog.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 01:27:45 +07:00
sun7i-a20-pcduino3.dtb \
ARM: dts: sun7i: Add dts file for Wexler TAB7200 This patch add support for Wexler TAB7200 tablet. The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480), capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot, mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-03-08 18:57:33 +07:00
sun7i-a20-pcduino3-nano.dtb \
sun7i-a20-wexler-tab7200.dtb
ARM: sun8i: dt: Add Ippo-q8h v5 support The Ippo-q8h is a tablet circuit board commonly found in cheap Android tablets with A23 SoCs. There are at least 2 versions of the board, with different peripherals, such as WiFi chips. Common features among these tablets include 512 MB DRAM, NAND, MMC, LCD, capacitive touchscreen, accelerometer, 1 or 2 camera sensors, USB OTG, microphone and speaker. v5 of these board designs has a ESP8089 WiFi chip (not supported) connected to mmc1. This patch adds very basic support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-06-20 21:52:53 +07:00
dtb-$(CONFIG_MACH_SUN8I) += \
ARM: sun8i: Introduce A23 Evaluation Board Support The A23 Evaluation Board has an MMC slot, two UARTs, NAND, a few display connectors (RGB, MIPI, LVDS), a mini-PCIE slot, USB host and OTG and a bunch of embedded sensors. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-05-08 03:46:53 +07:00
sun8i-a23-evb.dtb \
ARM: dts: sun8i: Add dts file for Ippo Q8H v1.2 tablets The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate dtb file since some gpio-s surrounding the wlan/bluetooth are different, it uses different camera sensors, and different DRAM timings. Note that atm neither the wlan/bluetooth nor the camera are supported, so atm their is no difference between the dts files, but because of the different DRAM timings there are already separate u-boot configs for the 2 different versions, and the 1.2 config refers to sun8i-a23-ippo-q8h-v1.2.dtb to be future proof, so we need to provide a sun8i-a23-ippo-q8h-v1.2.dtb file. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-13 17:44:32 +07:00
sun8i-a23-ippo-q8h-v5.dtb \
ARM: dts: sun8i: Add ET-Q8 A33 support ET-Q8_A33 is A33 based cheap tablet in common Q8 format. It has 512MB RAM, 4GB Nand, 7" Display, RDA5900P wifi, GSL1680 touch, etc. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Chen-Yu Tsai <wens@csie.org>
2015-05-30 21:55:05 +07:00
sun8i-a23-ippo-q8h-v1.2.dtb \
ARM: dts: sun8i-a33: Add dts for Sinlinx SinA33 development board. The SinA33 is a core/SDK development board by Sinlinx. The core board does not have any connectors or pads, other than the pads used to connect it to the SDK board. The core board only has the A33 SoC, 2 RAM chips, an eMMC flash chip, the AXP223 PMIC, and supporting discrete components. eMMC is optional. The SDK board has a USB host, USB OTG, volume control and home buttons, audio input/output jacks, a micro-SD slot, camera and SDIO expansion headers, an LCD connector, and a GPIO expansion header, which has UARTs, MIPI DSI and I2C available. Only UART0 is enabled though. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-02 17:04:03 +07:00
sun8i-a33-et-q8-v1.6.dtb \
ARM: dts: sun8i: Add dts file for the GA10H-A33 tablet The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand, sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot. This commit adds a dts file for the v1.1 pcb with an a33 soc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-03 03:08:02 +07:00
sun8i-a33-ga10h-v1.1.dtb \
ARM: dts: sun8i-a33: Add dts for Sinlinx SinA33 development board. The SinA33 is a core/SDK development board by Sinlinx. The core board does not have any connectors or pads, other than the pads used to connect it to the SDK board. The core board only has the A33 SoC, 2 RAM chips, an eMMC flash chip, the AXP223 PMIC, and supporting discrete components. eMMC is optional. The SDK board has a USB host, USB OTG, volume control and home buttons, audio input/output jacks, a micro-SD slot, camera and SDIO expansion headers, an LCD connector, and a GPIO expansion header, which has UARTs, MIPI DSI and I2C available. Only UART0 is enabled though. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-02 17:04:03 +07:00
sun8i-a33-sinlinx-sina33.dtb
ARM: dts: sun9i: Add A80 Optimus Board support The A80 Optimus Board is was launched with the Allwinner A80 SoC. It was jointly developed by Allwinner and Merrii. This board has a UART port, a JTAG connector, USB host ports, a USB 3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash, 4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone jack, IR receiver, and additional GPIO headers. This patch adds only basic support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Andreas Färber <afaerber@suse.de>
2014-10-08 20:02:54 +07:00
dtb-$(CONFIG_MACH_SUN9I) += \
ARM: dts: add cubietech cubieboard4 Add a Cubietech Cubieboard4 device tree and instruct make to build it. This device tree has been derived from the sun9i-a80-optimus.dts as they are very similar in design[1]. Notably, I2C3 is not used on Cubieboard4 and the LED/PWM definitions will need to be updated in the future. [1] http://dl.cubieboard.org/model/cc-a80/Hardware/CC-A80-HW-V1.1.pdf Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-03-10 03:19:57 +07:00
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
tegra20-harmony.dtb \
ARM: tegra: Add Toradex Iris carrier board DT with T20 512MB COM This adds the device tree for the Toradex Iris carrier board used together with a Colibri T20 512MB COM. The Iris has the following features, in brackets the current status: - DVI and VGA output through DVI-I connector (DVI-D enabled and tested) - LVDS output - 1 USB host port (enabled and tested) - 1 USB OTG port (enabled) - 100 MBit Ethernet (enabled and tested) - 5 UART ports (2 on 10way headers enabled and tested) - 1 MicroSD Slot (enabled and tested) - Audio connectors (enabled, only HP out and Line-in tested) - i2c RTC - GPIO connector (enabled, only sparsely tested) - external i2c bus - 4 PWM out - analog in Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-23 04:46:09 +07:00
tegra20-iris-512.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 12:53:18 +07:00
tegra20-medcom-wide.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
tegra20-paz00.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 12:53:18 +07:00
tegra20-plutux.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
tegra20-seaboard.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 12:53:18 +07:00
tegra20-tec.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
tegra20-whistler.dtb
dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
ARM: tegra: initial support for apalis t30 This patch adds the device tree to support Toradex Apalis T30, a computer on module which can be used on different carrier boards. The module consists of a Tegra 3 SoC, two PMICs, 1 or 2 GB of DDR3L RAM, eMMC, an LM95245 temperature sensor chip, an i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller as well as two MCP2515 CAN controllers. Furthermore, there is an SGTL5000 audio codec which is not yet supported. Anything that is not self contained on the module is disabled by default. The device tree for the Evaluation Board includes the modules device tree and enables the supported peripherals of the carrier board (the Evaluation Board supports almost all of them). While at it also add the device tree binding documentation for Apalis T30. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [swarren: fixed some node sort orders] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-10 05:52:46 +07:00
tegra30-apalis-eval.dtb \
ARM: DT: tegra: Add Tegra30 Beaver board support This patch adds support for Tegra30 Beaver board in upstream kernel. Beaver board is a Tegra30 SoC based development board, it has following features: - T30 or T33 SoC (Qual core ARM Cortex A9) - 2 GB DDR3L - 16 GB EMMC - 1 SD slot - 1 USB Standart A port and 1 USB micro AB port - PCI-E Gig Ethernet - Audio input/output - SATA port - HDMI output - UART and JTAG Signed-off-by: Bryan Wu <pengw@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-03 06:53:51 +07:00
tegra30-beaver.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 12:53:18 +07:00
tegra30-cardhu-a02.dtb \
ARM: dt: tegra114: Add new board, Dalmore Add a new evaluation board, Dalmore for Tegra 114 family. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-24 08:10:24 +07:00
tegra30-cardhu-a04.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
tegra30-colibri-eval-v3.dtb
dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
ARM: tegra: add Venice2 board support Add support for the Tegra124 based Venice2 reference board. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-08 11:50:06 +07:00
tegra114-dalmore.dtb \
ARM: tegra: add device tree for SHIELD NVIDIA SHIELD is a portable Android console containing a Tegra 4 SoC with 2GB RAM and a 720p panel. The following hardware is enabled by this device tree: UART, eMMC, USB (needs external power), PMIC, backlight, joystick, SD card, GPIO keys. DSI panel, HDMI output, charger, self-powered USB, audio, wifi bluetooth are not supported yet but might be by future patches (likely in that order). Touch panel and sensors will probably never be supported. Initrd addresses are hardcoded to match the static values used by the bootloader, since it won't add them for us. All the same, a kernel command-line is provided to replace the one passed by the bootloader which is filled with garbage. NVIDIA SHIELD is typically booted with an appended DTB to avoid modifications made by the bootloader. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> [swarren, fixed gpio-keys child node sort order, patch description] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-05-12 15:26:49 +07:00
tegra114-roth.dtb \
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
tegra114-tn7.dtb
dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
ARM: tegra: add Jetson TK1 device tree Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124, 2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI, audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing GPIOs, I2C, SPI, CSI, eDP, etc. The following features work with this device tree: UART, SD card, eMMC, SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system power-off, suspend/resume (LP1) with wake via RTC alarm. The following features should work with this device tree, but are not validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the power button. The following features are not yet implemented in this device tree: Most voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini- PCIe connector), CSI, SATA. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
tegra124-jetson-tk1.dtb \
ARM: tegra: add Acer Chromebook 13 device tree The Acer Chromebook 13, codenamed Big, contains an NVIDIA tegra124 processor and is similar to the Venice2 reference platform. The keyboard, USB 2, audio, sdcard and emmc have been tested and work on the 1366x768 models. The Full HD models haven't been tested yet. WiFi does not yet work, it needs at least some PMIC changes to enable the 32k clock. The elan trackpad is not yet functional but hopefully will be soon as there are patches under review. There is also an issue on reboot because the TPM isn't reset. It will cause the stock firmware to enter recovery mode. This can be worked around by an EC-reset, press the refresh and power keys at the same time. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-09-05 05:20:35 +07:00
tegra124-nyan-big.dtb \
ARM: tegra: Add DTS for the nyan-blaze board It's commercial name is HP Chromebook 14 and is substantially similar to the Acer Chromebook 13 (nyan-big). Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-18 16:52:19 +07:00
tegra124-nyan-blaze.dtb \
ARM: tegra: add Venice2 board support Add support for the Tegra124 based Venice2 reference board. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-08 11:50:06 +07:00
tegra124-venice2.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_U300) += \
ste-u300.dtb
dtb-$(CONFIG_ARCH_U8500) += \
ste-snowball.dtb \
ARM: Tidy up DTB Makefile entries Few things were out of order: - removed ARCH_BCM2835 duplicate - shuffled ARCH_BCM_5301X, ARCH_U8500 and ARCH_U300 around so to keep the list sorted Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Signed-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-14 16:55:01 +07:00
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
ste-hrefv60plus-stuib.dtb \
ste-hrefv60plus-tvk.dtb \
ste-ccu8540.dtb \
ste-ccu9540.dtb
ARM: dts: UniPhier: add support for UniPhier SoCs and boards Initial device trees for UniPhier SoCs: PH1-sLD3, PH1-LD4, PH1-Pro4, and PH1-sLD8. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-08 11:07:13 +07:00
dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ph1-sld3-ref.dtb \
uniphier-ph1-ld4-ref.dtb \
uniphier-ph1-pro4-ref.dtb \
uniphier-ph1-sld8-ref.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_VERSATILE) += \
versatile-ab.dtb \
ARM: versatile: add versatile dtbs to dtbs target Add the versatile platform dtbs to the dtbs make rule. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-03-14 09:31:42 +07:00
versatile-pb.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_VEXPRESS) += \
vexpress-v2p-ca5s.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
xen: move the xenvm machine to mach-virt xenvm is based on mach-vexpress, move it to mach-virt. Changes in v4: - update the dts Makefile too. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> CC: Marc Zyngier <marc.zyngier@arm.com> CC: will.deacon@arm.com CC: arnd@arndb.de CC: rob.herring@calxeda.com
2013-04-23 21:51:11 +07:00
vexpress-v2p-ca15_a7.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_VIRT) += \
xenvm-4.2.dtb
dtb-$(CONFIG_ARCH_VT8500) += \
vt8500-bv07.dtb \
dtb: Add arch-vt8500 board files to arch/arm/boot/dts/Makefile Add board files (vt8500-bv07, wm8505-ref and wm8650-mid) to allow 'make dtbs' on arch-vt8500. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-07 08:14:41 +07:00
wm8505-ref.dtb \
dts: vt8500: Add initial dts support for WM8850 This patch adds a soc dtsi for the Wondermedia WM8850. A board dts file is also included for the W70v2 tablet, with support for all the drivers currently in mainline. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-19 13:44:28 +07:00
wm8650-mid.dtb \
dts: vt8500: Add devicetree support for WM8750 SoC and APC8750 board This patch adds support for the WonderMedia WM8750 SoC and the VIA APC8750 board. Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
2013-04-23 05:55:57 +07:00
wm8750-apc8750.dtb \
dts: vt8500: Add initial dts support for WM8850 This patch adds a soc dtsi for the Wondermedia WM8850. A board dts file is also included for the W70v2 tablet, with support for all the drivers currently in mainline. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-19 13:44:28 +07:00
wm8850-w70v2.dtb
ARM: dts: zynq: Add Parallella device tree This allows to boot the Adapteva Parallella board to serial console. Cc: Andreas Olofsson <andreas@adapteva.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-25 06:00:12 +07:00
dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-parallella.dtb \
zynq-zc702.dtb \
arm: dt: zynq: Add support for the zed platform Add a DT fragment for the Zed Zynq platform and a corresponding target to the Makefile Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-13 23:37:18 +07:00
zynq-zc706.dtb \
arm: dts: zynq: Add Digilent ZYBO board Add a DTS describing the Digilent ZYBO board. Similar to ZED but with a 50MHz crystal instead of 33MHz. Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-12-01 07:25:50 +07:00
zynq-zed.dtb \
zynq-zybo.dtb
mvebu dt changes for v3.15 (incremental pull #3) - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJTFTyxAAoJEP45WPkGe8ZnDnwP/j1mxhzK7jY6KHJlY79Z/Bjr ZXGcVZIcmzYQMEaEcpT1lMtzQnxRf9xqd8JMr2k33oNe0uzEOp6wiSfIkw7aldkV s2ZGp0PjaVhJZqhgzbH0LJhid73RRBTCUGNrzCYDQt9BWkvJygnP7iFjNHQzijVJ UjpXhxVdVXpx9RTVwgcHs7GtDskrUhiPBlDcJePuk3q8oRwNJA+jDiWxBTALtABd JdvpaNW4RHFR1KAoHTqxhFuS61W+DF3IQalH8PpcYHYV/MXs1QByP1nbEira7Dav HuIgGtiltfObMHN6DrU4uPQFvb0Ab13q5WoZmW4bR9Y01wpM5TgOQxXpLZi/aCbV dr4UmbcUSo9MDCMZvOEIHC+7FW5LutVNt4IwqQN/bJQyK1aZMjJTS4aVxmU+2Vl+ mIaPyh3ePXAtGEg3Ai7iWfbEMANKz2qoqShckxbqEPLsDCeYY4ar9TnUHHSc8Mat LskwGE25ACcaQkf1vFkZNSaezEiB9yai37yGKu83FyYk8Vi/hsLxeb6EBHKULC// 8uU4abC12nw8KAX/sHStjMKa64upoyycczVxhKjwLPmgwSSW47m8ZyE+tzxpNBE3 4oBLB4C9lCouUXrpOxkkRv0uSSeJ/1dW8IhSxFWQuNRi2rl2KJsKzYKIWLEjNbqT YrrarK14xpMewjJduvat =38NX -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper: - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) * tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add dts file describing HP T5325 thin client ARM: kirkwood: Add i2c alias so setting bus number ARM: kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: select dtbs from MACH_ARMADA_* ARM: dove: add global-config register node ARM: dove: add additional pinctrl registers ARM: mvebu: Instantiate system controller in kirkwood.dtsi ARM: kirkwood: Instantiate L2 cache from DT. ARM: mvebu: use macros for interrupt flags on Armada 375/38x ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs ARM: mvebu: use C preprocessor include for Armada 375/38x DTs ARM: Kirkwood: Add support for many Synology NAS devices DT: i2c: Trivial: Add sii,s35390a DT: Vendor prefixes: Add ricoh, qnap, sii and synology ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: add Device Tree for the Armada 385 DB board ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs ARM: mvebu: add Device Tree for the Armada 375 DB board ARM: mvebu: add Device Tree description of the Armada 375 SoC ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:02:46 +07:00
dtb-$(CONFIG_MACH_ARMADA_370) += \
armada-370-db.dtb \
ARM: mvebu: dts: Add dts file for DLink DNS-327L DNS-327L is a 2-bay NAS with the following specs: - 512MiB RAM - 128MiB NAND Flash - 1 GbE interface (Marvell PHY) - 1 rear USB 3.0 port (via PCIe USB 3.0 controller) - 2 internal SATA ports handled by the Armada 370: uses 2 gpios for power control - two front 2-color leds (amber + white) for both discs, controlled by the SoC - One white LED handled by SoC (USB) - 3 buttons. Power handled by weltrend, USB and RESET (on the bottom) are wired via GPIOs - Unidentified i2c device at address 0x13 (via i2cdetect) - UART0 providing serial console - Weltrend MCU serving for RTC, temperature, fan control, and power button handling interfaced via UART1 (Handled via userspace dns320l-daemon) Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-05-26 22:51:11 +07:00
armada-370-dlink-dns327l.dtb \
mvebu dt changes for v3.15 (incremental pull #3) - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJTFTyxAAoJEP45WPkGe8ZnDnwP/j1mxhzK7jY6KHJlY79Z/Bjr ZXGcVZIcmzYQMEaEcpT1lMtzQnxRf9xqd8JMr2k33oNe0uzEOp6wiSfIkw7aldkV s2ZGp0PjaVhJZqhgzbH0LJhid73RRBTCUGNrzCYDQt9BWkvJygnP7iFjNHQzijVJ UjpXhxVdVXpx9RTVwgcHs7GtDskrUhiPBlDcJePuk3q8oRwNJA+jDiWxBTALtABd JdvpaNW4RHFR1KAoHTqxhFuS61W+DF3IQalH8PpcYHYV/MXs1QByP1nbEira7Dav HuIgGtiltfObMHN6DrU4uPQFvb0Ab13q5WoZmW4bR9Y01wpM5TgOQxXpLZi/aCbV dr4UmbcUSo9MDCMZvOEIHC+7FW5LutVNt4IwqQN/bJQyK1aZMjJTS4aVxmU+2Vl+ mIaPyh3ePXAtGEg3Ai7iWfbEMANKz2qoqShckxbqEPLsDCeYY4ar9TnUHHSc8Mat LskwGE25ACcaQkf1vFkZNSaezEiB9yai37yGKu83FyYk8Vi/hsLxeb6EBHKULC// 8uU4abC12nw8KAX/sHStjMKa64upoyycczVxhKjwLPmgwSSW47m8ZyE+tzxpNBE3 4oBLB4C9lCouUXrpOxkkRv0uSSeJ/1dW8IhSxFWQuNRi2rl2KJsKzYKIWLEjNbqT YrrarK14xpMewjJduvat =38NX -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper: - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) * tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add dts file describing HP T5325 thin client ARM: kirkwood: Add i2c alias so setting bus number ARM: kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: select dtbs from MACH_ARMADA_* ARM: dove: add global-config register node ARM: dove: add additional pinctrl registers ARM: mvebu: Instantiate system controller in kirkwood.dtsi ARM: kirkwood: Instantiate L2 cache from DT. ARM: mvebu: use macros for interrupt flags on Armada 375/38x ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs ARM: mvebu: use C preprocessor include for Armada 375/38x DTs ARM: Kirkwood: Add support for many Synology NAS devices DT: i2c: Trivial: Add sii,s35390a DT: Vendor prefixes: Add ricoh, qnap, sii and synology ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: add Device Tree for the Armada 385 DB board ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs ARM: mvebu: add Device Tree for the Armada 375 DB board ARM: mvebu: add Device Tree description of the Armada 375 SoC ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:02:46 +07:00
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
armada-370-netgear-rn104.dtb \
arm: mvebu: add .dts file for Synology DS213j Synology DS213j is a 2-bay NAS powered by a Marvell Armada 370 (88F6710 @1.2Ghz). It is very similar on many aspects to previous 2-bay synology models based on Marvell kirkwood SoC. Here is a short summary of the device: - 512MB RAM - boot on SPI flash (64Mbit Micron N25Q064) - 1 GbE interface (Armada MAC connected to a Marvell 88E1512 PHY via SGMII) - 2 rear USB 2.0 ports (directly handled by the Armada 370) - 2 internal SATA ports handled by the Armada 370: 2 GPIO for presence, 2 for powering them - two front amber LED (disk1, disk2) controlled by the SoC - Seiko S-35390A I2C RTC chip - UART0 providing serial console - UART1 used for poweroff (connected to a TI MSP430F2111) - Fan handled via 4 GPIO (3 for speed, 1 for alarm) Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/20f1a03897df1d825b62abdd525e588a8e39b3ec.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-22 06:46:49 +07:00
armada-370-rd.dtb \
armada-370-synology-ds213j.dtb
mvebu dt changes for v3.15 (incremental pull #3) - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJTFTyxAAoJEP45WPkGe8ZnDnwP/j1mxhzK7jY6KHJlY79Z/Bjr ZXGcVZIcmzYQMEaEcpT1lMtzQnxRf9xqd8JMr2k33oNe0uzEOp6wiSfIkw7aldkV s2ZGp0PjaVhJZqhgzbH0LJhid73RRBTCUGNrzCYDQt9BWkvJygnP7iFjNHQzijVJ UjpXhxVdVXpx9RTVwgcHs7GtDskrUhiPBlDcJePuk3q8oRwNJA+jDiWxBTALtABd JdvpaNW4RHFR1KAoHTqxhFuS61W+DF3IQalH8PpcYHYV/MXs1QByP1nbEira7Dav HuIgGtiltfObMHN6DrU4uPQFvb0Ab13q5WoZmW4bR9Y01wpM5TgOQxXpLZi/aCbV dr4UmbcUSo9MDCMZvOEIHC+7FW5LutVNt4IwqQN/bJQyK1aZMjJTS4aVxmU+2Vl+ mIaPyh3ePXAtGEg3Ai7iWfbEMANKz2qoqShckxbqEPLsDCeYY4ar9TnUHHSc8Mat LskwGE25ACcaQkf1vFkZNSaezEiB9yai37yGKu83FyYk8Vi/hsLxeb6EBHKULC// 8uU4abC12nw8KAX/sHStjMKa64upoyycczVxhKjwLPmgwSSW47m8ZyE+tzxpNBE3 4oBLB4C9lCouUXrpOxkkRv0uSSeJ/1dW8IhSxFWQuNRi2rl2KJsKzYKIWLEjNbqT YrrarK14xpMewjJduvat =38NX -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper: - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) * tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add dts file describing HP T5325 thin client ARM: kirkwood: Add i2c alias so setting bus number ARM: kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: select dtbs from MACH_ARMADA_* ARM: dove: add global-config register node ARM: dove: add additional pinctrl registers ARM: mvebu: Instantiate system controller in kirkwood.dtsi ARM: kirkwood: Instantiate L2 cache from DT. ARM: mvebu: use macros for interrupt flags on Armada 375/38x ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs ARM: mvebu: use C preprocessor include for Armada 375/38x DTs ARM: Kirkwood: Add support for many Synology NAS devices DT: i2c: Trivial: Add sii,s35390a DT: Vendor prefixes: Add ricoh, qnap, sii and synology ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: add Device Tree for the Armada 385 DB board ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs ARM: mvebu: add Device Tree for the Armada 375 DB board ARM: mvebu: add Device Tree description of the Armada 375 SoC ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:02:46 +07:00
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
ARM: mvebu: Add Armada 385 Access Point Development Board support The A385-AP is a board produced by Marvell that holds 3 mPCIe slot, a 16MB SPI-NOR, 3 Gigabit Ethernet ports, USB3 and NAND flash storage. [gregory.clement@free-electrons.com: switch the license to the dual X11/GPL with the agreement of the author] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09 00:38:09 +07:00
armada-385-db-ap.dtb \
ARM: mvebu: add support for the new Armada 385 based Linksys boards This patch adds support for the Linksys WRT1200AC (Caiman) and the Linksys WRT1900AC v2 (Cobra). Both boards have: - 2 Marvell 88W8864 radios - 1 USB 3.0 port - 1 USB 2.0/eSATAp port - 2 Ethernet interfaces connected to a 88E6176 switch (1x WAN + 4x LAN) - 128MB NAND flash - 512MB RAM gregory.clement@free-electrons.com: use serial0:115200n8 in stdout-path and remove the bootargs part in the chosen node Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-05-21 04:14:16 +07:00
armada-385-linksys-caiman.dtb \
armada-385-linksys-cobra.dtb \
ARM: mvebu: Add Device Tree description of the Armada 388 SoC This SoC belongs to the Armada 38x family. The main difference with the Armada 385 is that the 388 can handle two more SATA ports. Currently the consequence is the use of a different compatible string for the pinctrl node, in order to be able to use the pins associated to this 2 new SATA ports. The second SATA controller has also been moved from the armada38x.dtsi as it it specific to the Armada388 version. In the same time the Armada385 DB and Armada 385 RD board have been renamed in the 388 one and now include the armada-388.dtsi file. AS both of them have 4 SATA ports the SoC used on them were wrongly described. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09 00:38:13 +07:00
armada-388-db.dtb \
ARM: mvebu: Add Armada 388 General Purpose Development Board support The A388-GP is a board produced by Marvell that holds - 1 PCIe slot - 2 mini PCIe slot (one of them is multiplexed with the PCIe slot, muxing is selected through the GPIO expander) - 1 16MB SPI-NOR - 2 Gigabit Ethernet ports - 4 SATA ports (2 of them are multiplexed with the mini PCIe slots, muxing is selected through the GPIO expander) - 1 SDIO slot - 1 USB3 port - 2 USB2 port - 2 GPIO/interrupts expander on I2C Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09 01:11:33 +07:00
armada-388-gp.dtb \
ARM: mvebu: Add Device Tree description of the Armada 388 SoC This SoC belongs to the Armada 38x family. The main difference with the Armada 385 is that the 388 can handle two more SATA ports. Currently the consequence is the use of a different compatible string for the pinctrl node, in order to be able to use the pins associated to this 2 new SATA ports. The second SATA controller has also been moved from the armada38x.dtsi as it it specific to the Armada388 version. In the same time the Armada385 DB and Armada 385 RD board have been renamed in the 388 one and now include the armada-388.dtsi file. AS both of them have 4 SATA ports the SoC used on them were wrongly described. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09 00:38:13 +07:00
armada-388-rd.dtb
ARM: mvebu: add Device Tree files for Armada 39x SoC and board This commit adds the Device Tree files for the Armada 39x family of processors, as well as one Armada 398 Development Board. Like for other Marvell EBU families, a common armada-39x.dtsi contains the description of the common features of all Armada 39x SoCs, while armada-390.dtsi and armada-398.dtsi respectively describe the specificities of those SoCs. Finally, an armada-398-db.dts file is added to describe the Armada 398 Development Board itself. So far, the following features are supported: * SMP: dual Cortex-A9 * Basic ARM IPs: SCU, timer, GIC, L2 cache * Basic Marvell IPs: pin-muxing, clocks, system controller, MBus controller, MPIC interrupt controller, timer, CPU reset for SMP, PMSU. * I2C * SPI * SDHCI * XOR * NAND * UART * PCIe Additional features will be supported in the future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-03 21:41:12 +07:00
dtb-$(CONFIG_MACH_ARMADA_39X) += \
armada-398-db.dtb
mvebu dt changes for v3.15 (incremental pull #3) - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJTFTyxAAoJEP45WPkGe8ZnDnwP/j1mxhzK7jY6KHJlY79Z/Bjr ZXGcVZIcmzYQMEaEcpT1lMtzQnxRf9xqd8JMr2k33oNe0uzEOp6wiSfIkw7aldkV s2ZGp0PjaVhJZqhgzbH0LJhid73RRBTCUGNrzCYDQt9BWkvJygnP7iFjNHQzijVJ UjpXhxVdVXpx9RTVwgcHs7GtDskrUhiPBlDcJePuk3q8oRwNJA+jDiWxBTALtABd JdvpaNW4RHFR1KAoHTqxhFuS61W+DF3IQalH8PpcYHYV/MXs1QByP1nbEira7Dav HuIgGtiltfObMHN6DrU4uPQFvb0Ab13q5WoZmW4bR9Y01wpM5TgOQxXpLZi/aCbV dr4UmbcUSo9MDCMZvOEIHC+7FW5LutVNt4IwqQN/bJQyK1aZMjJTS4aVxmU+2Vl+ mIaPyh3ePXAtGEg3Ai7iWfbEMANKz2qoqShckxbqEPLsDCeYY4ar9TnUHHSc8Mat LskwGE25ACcaQkf1vFkZNSaezEiB9yai37yGKu83FyYk8Vi/hsLxeb6EBHKULC// 8uU4abC12nw8KAX/sHStjMKa64upoyycczVxhKjwLPmgwSSW47m8ZyE+tzxpNBE3 4oBLB4C9lCouUXrpOxkkRv0uSSeJ/1dW8IhSxFWQuNRi2rl2KJsKzYKIWLEjNbqT YrrarK14xpMewjJduvat =38NX -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper: - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) * tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add dts file describing HP T5325 thin client ARM: kirkwood: Add i2c alias so setting bus number ARM: kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: select dtbs from MACH_ARMADA_* ARM: dove: add global-config register node ARM: dove: add additional pinctrl registers ARM: mvebu: Instantiate system controller in kirkwood.dtsi ARM: kirkwood: Instantiate L2 cache from DT. ARM: mvebu: use macros for interrupt flags on Armada 375/38x ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs ARM: mvebu: use C preprocessor include for Armada 375/38x DTs ARM: Kirkwood: Add support for many Synology NAS devices DT: i2c: Trivial: Add sii,s35390a DT: Vendor prefixes: Add ricoh, qnap, sii and synology ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: add Device Tree for the Armada 385 DB board ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs ARM: mvebu: add Device Tree for the Armada 375 DB board ARM: mvebu: add Device Tree description of the Armada 375 SoC ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:02:46 +07:00
dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
armada-xp-gp.dtb \
ARM: mvebu: Add dts definition for Lenovo Iomega ix4-300d NAS The Lenovo Iomega ix4-300d is a 4-Bay sata NAS with dual Gb, USB2.0 & 3.0, powered by a Marvell Armada XP MV78230 dual core CPU. http://shop.lenovo.com/us/en/servers/network-storage/lenovoemc/ix4-300d/ Signed-off-by: Benoit Masson <yahoo@perenite.com> Link: https://lkml.kernel.org/r/1406503839-4662-1-git-send-email-yahoo@perenite.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-28 06:30:39 +07:00
armada-xp-lenovo-ix4-300d.dtb \
ARM: mvebu: add Linksys WRT1900AC (Mamba) support The Linksys WRT1900AC (Mamba) is a router that has - 2 mini-PCIe slots with Marvell 88W8864 radios - 1 USB 3.0 port - 1 USB 2.0/eSATAp port - 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN) - 128MB NAND flash - 256MB RAM gregory.clement@free-electrons.com: - add ARM to the title - fix the reference to CONFIG_DEBUG_MVEBU_UART0_ALTERNATE - fix the unbalanced comment for the syscfg partition Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-02-16 19:31:04 +07:00
armada-xp-linksys-mamba.dtb \
mvebu dt changes for v3.15 (incremental pull #3) - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJTFTyxAAoJEP45WPkGe8ZnDnwP/j1mxhzK7jY6KHJlY79Z/Bjr ZXGcVZIcmzYQMEaEcpT1lMtzQnxRf9xqd8JMr2k33oNe0uzEOp6wiSfIkw7aldkV s2ZGp0PjaVhJZqhgzbH0LJhid73RRBTCUGNrzCYDQt9BWkvJygnP7iFjNHQzijVJ UjpXhxVdVXpx9RTVwgcHs7GtDskrUhiPBlDcJePuk3q8oRwNJA+jDiWxBTALtABd JdvpaNW4RHFR1KAoHTqxhFuS61W+DF3IQalH8PpcYHYV/MXs1QByP1nbEira7Dav HuIgGtiltfObMHN6DrU4uPQFvb0Ab13q5WoZmW4bR9Y01wpM5TgOQxXpLZi/aCbV dr4UmbcUSo9MDCMZvOEIHC+7FW5LutVNt4IwqQN/bJQyK1aZMjJTS4aVxmU+2Vl+ mIaPyh3ePXAtGEg3Ai7iWfbEMANKz2qoqShckxbqEPLsDCeYY4ar9TnUHHSc8Mat LskwGE25ACcaQkf1vFkZNSaezEiB9yai37yGKu83FyYk8Vi/hsLxeb6EBHKULC// 8uU4abC12nw8KAX/sHStjMKa64upoyycczVxhKjwLPmgwSSW47m8ZyE+tzxpNBE3 4oBLB4C9lCouUXrpOxkkRv0uSSeJ/1dW8IhSxFWQuNRi2rl2KJsKzYKIWLEjNbqT YrrarK14xpMewjJduvat =38NX -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper: - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) * tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add dts file describing HP T5325 thin client ARM: kirkwood: Add i2c alias so setting bus number ARM: kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: select dtbs from MACH_ARMADA_* ARM: dove: add global-config register node ARM: dove: add additional pinctrl registers ARM: mvebu: Instantiate system controller in kirkwood.dtsi ARM: kirkwood: Instantiate L2 cache from DT. ARM: mvebu: use macros for interrupt flags on Armada 375/38x ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs ARM: mvebu: use C preprocessor include for Armada 375/38x DTs ARM: Kirkwood: Add support for many Synology NAS devices DT: i2c: Trivial: Add sii,s35390a DT: Vendor prefixes: Add ricoh, qnap, sii and synology ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: add Device Tree for the Armada 385 DB board ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs ARM: mvebu: add Device Tree for the Armada 375 DB board ARM: mvebu: add Device Tree description of the Armada 375 SoC ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:02:46 +07:00
armada-xp-matrix.dtb \
ARM: mvebu: Add dts definition for Lenovo Iomega ix4-300d NAS The Lenovo Iomega ix4-300d is a 4-Bay sata NAS with dual Gb, USB2.0 & 3.0, powered by a Marvell Armada XP MV78230 dual core CPU. http://shop.lenovo.com/us/en/servers/network-storage/lenovoemc/ix4-300d/ Signed-off-by: Benoit Masson <yahoo@perenite.com> Link: https://lkml.kernel.org/r/1406503839-4662-1-git-send-email-yahoo@perenite.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-28 06:30:39 +07:00
armada-xp-netgear-rn2120.dtb \
arm: mvebu: add .dts file for Synology DS414 Synology DS414 is a 4-bay NAS powered by a Marvell Armada XP (mv78230 dual-core @1.33Ghz). It is very similar on many aspects to previous 4-bay synology models based on Marvell kirkwood SoC. Here is a short summary of the device: - 1GB RAM - Boot on SPI flash (64Mbit Micron N25Q064) - 2 GbE interfaces (Armada MAC connected to two Marvell 88E1512 PHY via RGMII) - 1 front USB 2.0 ports (directly handled by the Armada 370) - 2 rear USB 3.0 ports (handled by an EtronTech EJ168A XHCI controller on the PCIe bus) - 4 internal SATA ports handled by a Marvell 88SX7042 SATA-II controller on the PCIe bus) - Seiko S-35390A I2C RTC chip - UART0 providing serial console - UART1 used for poweroff (connected to a Microchip PIC16F883) Additional note: the front LEDs the and the two fans are not directly connected to the SoC and under its control. The former are presumably driven by the SATA controller, the latter by the PIC. [ jac: fixed up s/ge[01]_rgmii_pins/pmx_ge[01]_rgmii/ to match armada-xp.dtsi ] Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/5b678d6d1f2f42f4bf0d087878b9d8024d463ea7.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-22 06:46:57 +07:00
armada-xp-openblocks-ax3-4.dtb \
armada-xp-synology-ds414.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_MACH_DOVE) += \
Merge tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental #4)" from Jason Cooper: - dove - add system controller node - drop pinctrl PMU reg property _before_ it hits mainline and becomes ABI - mvebu - XP/370 - change default PCIe apertures - switch GP and DB boards internal registers to 0xf1000000 - correct RAM size on Matrix board - 385 - correct phy connection type for DB board - add RD board * tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu: ARM: dove: drop pinctrl PMU reg property ARM: mvebu: add Device Tree for the Armada 385 RD board ARM: mvebu: use the correct phy connection mode on Armada 385 DB ARM: mvebu: the Armada XP Matrix board has 4 GB ARM: mvebu: switch the Armada XP GP to use internal registers at 0xf1000000 ARM: mvebu: switch the Armada XP DB to use internal registers at 0xf1000000 ARM: mvebu: change the default PCIe apertures for Armada 370/XP ARM: dove: add system controller node Conflicts: arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:07:25 +07:00
dove-cubox.dtb \
ARM: dts: mvebu: split SolidRun CuBox into variants As Mainlining effort for SolidRun CuBox has been carried out on the Engineering Sample, the board DTS was reflecting this. Actually, SolidRun CuBox comes in three different variants: Engineering Sample (ES), production with 1GB RAM (1G), and production with 2GB RAM (2G). Therefore, we base current dove-cubox.dts on to the 1G production variant and add a ES dts to add required quirk for misrouted SDHCI card detect on top of dove-cubox.dts. For the 2G variant we rely on the bootloader to setup correct RAM size. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1401228006-3212-1-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-28 05:00:06 +07:00
dove-cubox-es.dtb \
Merge tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v3.15 (incremental #4)" from Jason Cooper: - dove - add system controller node - drop pinctrl PMU reg property _before_ it hits mainline and becomes ABI - mvebu - XP/370 - change default PCIe apertures - switch GP and DB boards internal registers to 0xf1000000 - correct RAM size on Matrix board - 385 - correct phy connection type for DB board - add RD board * tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu: ARM: dove: drop pinctrl PMU reg property ARM: mvebu: add Device Tree for the Armada 385 RD board ARM: mvebu: use the correct phy connection mode on Armada 385 DB ARM: mvebu: the Armada XP Matrix board has 4 GB ARM: mvebu: switch the Armada XP GP to use internal registers at 0xf1000000 ARM: mvebu: switch the Armada XP DB to use internal registers at 0xf1000000 ARM: mvebu: change the default PCIe apertures for Armada 370/XP ARM: dove: add system controller node Conflicts: arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 17:07:25 +07:00
dove-d2plug.dtb \
dove-d3plug.dtb \
ARM: dts: dove: Add Compulab SBC-A510 to Makefile With reworked device tree files for Compulab CM-A510 SoM and SBC-A510 base board, now add the correspoding board file to Makefile again. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-05-05 03:08:50 +07:00
dove-dove-db.dtb \
dove-sbc-a510.dtb
ARM: dts: Only build dtb if associated Arch and/or SoC is enabled A number of arches (EXYNOS/IMX/TEGRA) are separated out into finer grained definitions whether it be sub ARCH or SOC definitions. The device tree blobs should only be built if the specific option is enabled that supports that device or it might be that there's an expectation that the device is supported when in actual fact it's not. This ensures only the relevant bits are built. Also standardised the line break between the arch/soc definitions and the dtbs to be on separate lines for better consistency as per feedback. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> [olof: Fixed stray \ in one of the IMX rules] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-30 13:20:27 +07:00
dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6589-aquaris5.dtb \
ARM: mediatek: add dts for mt6592-evb The mt6592-evb is an evaluation board based on the MT6592 SoC. Signed-off-by: Howard Chen <ibanezchen@gmail.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-11-14 12:14:53 +07:00
mt6592-evb.dtb \
ARM: dts: Build dtb for mt8127 & mt8135 This allows the "make dtbs" to build the moose and mt8135-evbp1 for MediaTek SoC Signed-off-by: Joe.C <yingjoe.chen@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-11-04 14:30:53 +07:00
mt8127-moose.dtb \
mt8135-evbp1.dtb
ARM: dts: zx: add an initial zx296702 dts and doc Add initial dts file and document for ZX296702 and board ZX296702-AD1. More peripherals will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-06-04 10:21:02 +07:00
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-07 01:32:38 +07:00
endif
ARM: dt: change .dtb build rules to build in dts directory The current rules have the .dtb files build in a different directory from the .dts files. The only reason for this is that it was what PowerPC has done historically. This patch changes ARM to use the generic dtb rule which builds .dtb files in the same directory as the source .dts. Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Grant Likely <grant.likely@secretlab.ca> [swarren: added rm command for old stale .dtb files] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-11-28 06:29:11 +07:00
dts, arm/arm64: Remove dtbs build rules in sub-makes Add dtb files to build targets and let kbuild handle them. Thus, special dtbs rules can be removed. This eases Makefiles and the implementation of the support of vendor dtb subdirectories. Signed-off-by: Robert Richter <rrichter@cavium.com>
2014-09-03 20:54:55 +07:00
always := $(dtb-y)
clean-files := *.dtb
Reference in New Issue Copy Permalink