mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-04 11:36:51 +07:00
ARM: dts: display5: Device tree description of LWN's DISPLAY5 board
This commit adds device tree description of Liebherr's Display5 board. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Lukasz Majewski
Shawn Guo
parent
dd3421904f
commit
a103e41225
@ -414,6 +414,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
||||
imx6q-cm-fx6.dtb \
|
||||
imx6q-cubox-i.dtb \
|
||||
imx6q-dfi-fs700-m60.dtb \
|
||||
imx6q-display5-tianma-tm070-1280x768.dtb \
|
||||
imx6q-dmo-edmqmx6.dtb \
|
||||
imx6q-evi.dtb \
|
||||
imx6q-gk802.dtb \
|
||||
|
||||
51
arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
Normal file
51
arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
Normal file
@ -0,0 +1,51 @@
|
||||
/*
|
||||
* Copyright 2017
|
||||
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without
|
||||
* any warranty of any kind, whether express or implied.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "imx6q-display5.dtsi"
|
||||
|
||||
&panel {
|
||||
compatible = "tianma,tm070jdhg30";
|
||||
};
|
||||
|
||||
&ldb {
|
||||
lvds0: lvds-channel@0 {
|
||||
fsl,data-mapping = "spwg";
|
||||
fsl,data-width = <18>;
|
||||
};
|
||||
};
|
||||
596
arch/arm/boot/dts/imx6q-display5.dtsi
Normal file
596
arch/arm/boot/dts/imx6q-display5.dtsi
Normal file
@ -0,0 +1,596 @@
|
||||
/*
|
||||
* Copyright 2017
|
||||
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without
|
||||
* any warranty of any kind, whether express or implied.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "imx6q.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/sound/fsl-imx-audmux.h>
|
||||
|
||||
/ {
|
||||
model = "Liebherr (LWN) display5 i.MX6 Quad Board";
|
||||
compatible = "lwn,display5", "fsl,imx6q";
|
||||
|
||||
memory {
|
||||
reg = <0x10000000 0x40000000>;
|
||||
};
|
||||
|
||||
backlight_lvds: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_backlight>;
|
||||
pwms = <&pwm2 0 5000000 0>;
|
||||
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
|
||||
10 11 12 13 14 15 16 17 18 19
|
||||
20 21 22 23 24 25 26 27 28 29
|
||||
30 31 32 33 34 35 36 37 38 39
|
||||
40 41 42 43 44 45 46 47 48 49
|
||||
50 51 52 53 54 55 56 57 58 59
|
||||
60 61 62 63 64 65 66 67 68 69
|
||||
70 71 72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87 88 89
|
||||
90 91 92 93 94 95 96 97 98 99
|
||||
100 101 102 103 104 105 106 107 108 109
|
||||
110 111 112 113 114 115 116 117 118 119
|
||||
120 121 122 123 124 125 126 127 128 129
|
||||
130 131 132 133 134 135 136 137 138 139
|
||||
140 141 142 143 144 145 146 147 148 149
|
||||
150 151 152 153 154 155 156 157 158 159
|
||||
160 161 162 163 164 165 166 167 168 169
|
||||
170 171 172 173 174 175 176 177 178 179
|
||||
180 181 182 183 184 185 186 187 188 189
|
||||
190 191 192 193 194 195 196 197 198 199
|
||||
200 201 202 203 204 205 206 207 208 209
|
||||
210 211 212 213 214 215 216 217 218 219
|
||||
220 221 222 223 224 225 226 227 228 229
|
||||
230 231 232 233 234 235 236 237 238 239
|
||||
240 241 242 243 244 245 246 247 248 249
|
||||
250 251 252 253 254 255>;
|
||||
default-brightness-level = <250>;
|
||||
enable-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reg_lvds: regulator-lvds {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lvds_ppen";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_reg_lvds>;
|
||||
gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_usbh1_vbus: usb-h1-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbh1_vbus>;
|
||||
regulator-name = "usb_h1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-enable-ramp-delay = <300000>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
label = "tfa9879-mono";
|
||||
|
||||
simple-audio-card,dai-link {
|
||||
/* DAC */
|
||||
format = "i2s";
|
||||
bitclock-master = <&dailink_master>;
|
||||
frame-master = <&dailink_master>;
|
||||
|
||||
dailink_master: cpu {
|
||||
sound-dai = <&ssi2>;
|
||||
};
|
||||
codec {
|
||||
sound-dai = <&codec>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
panel: panel-lvds0 {
|
||||
backlight = <&backlight_lvds>;
|
||||
power-supply = <®_lvds>;
|
||||
|
||||
port {
|
||||
panel_in_lvds0: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&audmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_audmux>;
|
||||
status = "okay";
|
||||
|
||||
ssi2 {
|
||||
fsl,audmux-port = <1>;
|
||||
fsl,port-config = <
|
||||
(IMX_AUDMUX_V2_PTCR_SYN |
|
||||
IMX_AUDMUX_V2_PTCR_TFSEL(5) |
|
||||
IMX_AUDMUX_V2_PTCR_TCSEL(5) |
|
||||
IMX_AUDMUX_V2_PTCR_TFSDIR |
|
||||
IMX_AUDMUX_V2_PTCR_TCLKDIR)
|
||||
IMX_AUDMUX_V2_PDCR_RXDSEL(5)
|
||||
>;
|
||||
};
|
||||
|
||||
aud6 {
|
||||
fsl,audmux-port = <5>;
|
||||
fsl,port-config = <
|
||||
(IMX_AUDMUX_V2_PTCR_RFSEL(8) |
|
||||
IMX_AUDMUX_V2_PTCR_RCSEL(8) |
|
||||
IMX_AUDMUX_V2_PTCR_TFSEL(1) |
|
||||
IMX_AUDMUX_V2_PTCR_TCSEL(1) |
|
||||
IMX_AUDMUX_V2_PTCR_RFSDIR |
|
||||
IMX_AUDMUX_V2_PTCR_RCLKDIR |
|
||||
IMX_AUDMUX_V2_PTCR_TFSDIR |
|
||||
IMX_AUDMUX_V2_PTCR_TCLKDIR)
|
||||
IMX_AUDMUX_V2_PDCR_RXDSEL(1)
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&ecspi2 {
|
||||
cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs &pinctrl_ecspi2_flwp>;
|
||||
status = "okay";
|
||||
|
||||
s25fl256s: flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <40000000>;
|
||||
reg = <0>;
|
||||
|
||||
partition@0 {
|
||||
label = "SPL (spi)";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
partition@1 {
|
||||
label = "u-boot (spi)";
|
||||
reg = <0x20000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
partition@2 {
|
||||
label = "uboot-env (spi)";
|
||||
reg = <0x120000 0x10000>;
|
||||
};
|
||||
partition@3 {
|
||||
label = "uboot-envr (spi)";
|
||||
reg = <0x130000 0x10000>;
|
||||
};
|
||||
partition@4 {
|
||||
label = "linux-recovery (spi)";
|
||||
reg = <0x140000 0x800000>;
|
||||
};
|
||||
partition@5 {
|
||||
label = "swupdate-fitImg (spi)";
|
||||
reg = <0x940000 0x400000>;
|
||||
};
|
||||
partition@6 {
|
||||
label = "swupdate-initramfs (spi)";
|
||||
reg = <0xD40000 0x800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ecspi3 {
|
||||
cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet>;
|
||||
phy-handle = <ðernet_phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ethernet_phy0: ethernet-phy@0 {
|
||||
compatible = "marvell,88E1510";
|
||||
device_type = "ethernet-phy";
|
||||
/* Set LED0 control: */
|
||||
/* On - Link, Blink - Activity, Off - No Link */
|
||||
marvell,reg-init = <3 0x10 0 0x1011>;
|
||||
max-speed = <100>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
status = "okay";
|
||||
|
||||
codec: tfa9879@6C {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "nxp,tfa9879";
|
||||
reg = <0x6C>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
status = "okay";
|
||||
|
||||
at24@50 {
|
||||
compatible = "atmel,24c256";
|
||||
pagesize = <64>;
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
pfuze100: pmic@08 {
|
||||
compatible = "fsl,pfuze100";
|
||||
reg = <0x08>;
|
||||
|
||||
regulators {
|
||||
sw1a_reg: sw1ab {
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <1875000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <6250>;
|
||||
};
|
||||
|
||||
sw1c_reg: sw1c {
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <1875000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <6250>;
|
||||
};
|
||||
|
||||
sw2_reg: sw2 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3950000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw3a_reg: sw3a {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <1975000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw3b_reg: sw3b {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <1975000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw4_reg: sw4 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
swbst_reg: swbst {
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5150000>;
|
||||
};
|
||||
|
||||
snvs_reg: vsnvs {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vref_reg: vrefddr {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen1_reg: vgen1 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1550000>;
|
||||
};
|
||||
|
||||
vgen2_reg: vgen2 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1550000>;
|
||||
};
|
||||
|
||||
vgen3_reg: vgen3 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vgen4_reg: vgen4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen5_reg: vgen5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen6_reg: vgen6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ldb {
|
||||
status = "okay";
|
||||
|
||||
lvds0: lvds-channel@0 {
|
||||
status = "okay";
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
|
||||
lvds0_out: endpoint {
|
||||
remote-endpoint = <&panel_in_lvds0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
#pwm-cells = <3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssi2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart4>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart5>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
vbus-supply = <®_usbh1_vbus>;
|
||||
pinctrl-0 = <&pinctrl_usbh1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc4>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_audmux: audmuxgrp {
|
||||
fsl,pins = <
|
||||
/* I2S OUTPUT AUD6*/
|
||||
MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0
|
||||
MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0
|
||||
MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0
|
||||
MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_backlight: dispgrp {
|
||||
fsl,pins = <
|
||||
/* BLEN_OUT */
|
||||
MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi2: ecspi2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1
|
||||
MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1
|
||||
MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi2_cs: ecspi2csgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi2_flwp: ecspi2flwpgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi3: ecspi3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
|
||||
MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
|
||||
MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi3_cs: ecspi3csgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi3_flwp: ecspi3flwpgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_enet: enetgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
||||
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
|
||||
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
||||
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
|
||||
MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
|
||||
MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm2: pwm2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_reg_lvds: reqlvdsgrp {
|
||||
fsl,pins = <
|
||||
/* LVDS_PPEN_OUT */
|
||||
MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart4: uart4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart5: uart5grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbh1: usbh1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D30__USB_H1_OC 0x030b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbh1_vbus: usbh1_vbus_grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc4: usdhc4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
|
||||
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
|
||||
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
|
||||
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
|
||||
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
|
||||
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
|
||||
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
|
||||
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
|
||||
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
|
||||
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
|
||||
MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x17059
|
||||
>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user