mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-01-19 03:56:18 +07:00
ARM: dts: add Qualcomm APQ8060-based Dragonboard
This is the first Dragonboard based on APQ8060 and PM8058. It was produced in 2011 in cooperation between Qualcomm and BSQUARE. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
This commit is contained in:
Linus Walleij
Andy Gross
parent
1758b35808
commit
4892e0756c
@ -572,6 +572,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \
|
||||
dtb-$(CONFIG_ARCH_OXNAS) += \
|
||||
wd-mbwe.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
qcom-apq8060-dragonboard.dtb \
|
||||
qcom-apq8064-arrow-sd-600eval.dtb \
|
||||
qcom-apq8064-cm-qs600.dtb \
|
||||
qcom-apq8064-ifc6410.dtb \
|
||||
|
||||
626
arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
Normal file
626
arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
Normal file
@ -0,0 +1,626 @@
|
||||
/*
|
||||
* Copyright 2016 Linaro Ltd
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
||||
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include "qcom-msm8660.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm APQ8060 Dragonboard";
|
||||
compatible = "qcom,apq8060-dragonboard", "qcom,msm8660";
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi12_serial;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
|
||||
/* Main power of the board: 3.7V */
|
||||
vph: regulator-fixed {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
regulator-name = "VPH";
|
||||
regulator-type = "voltage";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* This is a levelshifter for SDCC5 */
|
||||
dragon_vio_txb: txb0104rgyr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "Dragon SDCC levelshifter";
|
||||
vin-supply = <&pm8058_l14>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
pinctrl@800000 {
|
||||
/* eMMMC pins, all 8 data lines connected */
|
||||
dragon_sdcc1_pins: sdcc1 {
|
||||
mux {
|
||||
pins = "gpio159", "gpio160", "gpio161",
|
||||
"gpio162", "gpio163", "gpio164",
|
||||
"gpio165", "gpio166", "gpio167",
|
||||
"gpio168";
|
||||
function = "sdc1";
|
||||
};
|
||||
clk {
|
||||
pins = "gpio167"; /* SDC5 CLK */
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
cmd {
|
||||
pins = "gpio168"; /* SDC5 CMD */
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
data {
|
||||
/* SDC5 D0 to D7 */
|
||||
pins = "gpio159", "gpio160", "gpio161", "gpio162",
|
||||
"gpio163", "gpio164", "gpio165", "gpio166";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* The SDCC3 pins are hardcoded (non-muxable) but need some pin
|
||||
* configuration.
|
||||
*/
|
||||
dragon_sdcc3_pins: sdcc3 {
|
||||
clk {
|
||||
pins = "sdc3_clk";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
cmd {
|
||||
pins = "sdc3_cmd";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
data {
|
||||
pins = "sdc3_data";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
/* Second SD card slot pins */
|
||||
dragon_sdcc5_pins: sdcc5 {
|
||||
mux {
|
||||
pins = "gpio95", "gpio96", "gpio97",
|
||||
"gpio98", "gpio99", "gpio100";
|
||||
function = "sdc5";
|
||||
};
|
||||
clk {
|
||||
pins = "gpio97"; /* SDC5 CLK */
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
cmd {
|
||||
pins = "gpio95"; /* SDC5 CMD */
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
data {
|
||||
/* SDC5 D0 to D3 */
|
||||
pins = "gpio96", "gpio98", "gpio99", "gpio100";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
dragon_gsbi12_i2c_pins: gsbi12_i2c {
|
||||
mux {
|
||||
pins = "gpio115", "gpio116";
|
||||
function = "gsbi12";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio115", "gpio116";
|
||||
drive-strength = <16>;
|
||||
/* These have external pull-up 4.7kOhm to 1.8V */
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
/* Primary serial port uart 0 pins */
|
||||
dragon_gsbi12_serial_pins: gsbi12_serial {
|
||||
mux {
|
||||
pins = "gpio117", "gpio118";
|
||||
function = "gsbi12";
|
||||
};
|
||||
tx {
|
||||
pins = "gpio117";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
rx {
|
||||
pins = "gpio118";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
qcom,ssbi@500000 {
|
||||
pmic@0 {
|
||||
keypad@148 {
|
||||
linux,keymap = <
|
||||
MATRIX_KEY(0, 0, KEY_MENU)
|
||||
MATRIX_KEY(0, 2, KEY_1)
|
||||
MATRIX_KEY(0, 3, KEY_4)
|
||||
MATRIX_KEY(0, 4, KEY_7)
|
||||
MATRIX_KEY(1, 0, KEY_UP)
|
||||
MATRIX_KEY(1, 1, KEY_LEFT)
|
||||
MATRIX_KEY(1, 2, KEY_DOWN)
|
||||
MATRIX_KEY(1, 3, KEY_5)
|
||||
MATRIX_KEY(1, 3, KEY_8)
|
||||
MATRIX_KEY(2, 0, KEY_HOME)
|
||||
MATRIX_KEY(2, 1, KEY_REPLY)
|
||||
MATRIX_KEY(2, 2, KEY_2)
|
||||
MATRIX_KEY(2, 3, KEY_6)
|
||||
MATRIX_KEY(3, 0, KEY_VOLUMEUP)
|
||||
MATRIX_KEY(3, 1, KEY_RIGHT)
|
||||
MATRIX_KEY(3, 2, KEY_3)
|
||||
MATRIX_KEY(3, 3, KEY_9)
|
||||
MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
|
||||
MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
|
||||
MATRIX_KEY(4, 1, KEY_BACK)
|
||||
MATRIX_KEY(4, 2, KEY_CAMERA)
|
||||
MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
|
||||
>;
|
||||
keypad,num-rows = <6>;
|
||||
keypad,num-columns = <5>;
|
||||
};
|
||||
|
||||
gpio@150 {
|
||||
dragon_bmp085_gpios: bmp085-gpios {
|
||||
pinconf {
|
||||
pins = "gpio16";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
bias-disable;
|
||||
power-source = <PM8058_GPIO_S3>;
|
||||
};
|
||||
};
|
||||
dragon_sdcc3_gpios: sdcc3-gpios {
|
||||
pinconf {
|
||||
pins = "gpio22";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
bias-disable;
|
||||
power-source = <PM8058_GPIO_S3>;
|
||||
};
|
||||
};
|
||||
dragon_sdcc5_gpios: sdcc5-gpios {
|
||||
pinconf {
|
||||
pins = "gpio26";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
|
||||
power-source = <PM8058_GPIO_S3>;
|
||||
};
|
||||
};
|
||||
dragon_ak8975_gpios: ak8975-gpios {
|
||||
pinconf {
|
||||
pins = "gpio33";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
bias-disable;
|
||||
power-source = <PM8058_GPIO_S3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@19c00000 {
|
||||
status = "ok";
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
|
||||
serial@19c40000 {
|
||||
status = "ok";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dragon_gsbi12_serial_pins>;
|
||||
};
|
||||
|
||||
i2c@19c80000 {
|
||||
status = "ok";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
|
||||
|
||||
ak8975@0c {
|
||||
compatible = "asahi-kasei,ak8975";
|
||||
reg = <0x0c>;
|
||||
/* GPIO33 has interrupt 224 on the PM8058 */
|
||||
interrupt-parent = <&pm8058_gpio>;
|
||||
interrupts = <224 IRQ_TYPE_EDGE_RISING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dragon_ak8975_gpios>;
|
||||
vid-supply = <&pm8058_lvs0>; // 1.8V
|
||||
vdd-supply = <&pm8058_l14>; // 2.85V
|
||||
};
|
||||
bmp085@77 {
|
||||
compatible = "bosch,bmp085";
|
||||
reg = <0x77>;
|
||||
/* GPIO16 has interrupt 207 on the PM8058 */
|
||||
interrupt-parent = <&pm8058_gpio>;
|
||||
interrupts = <207 IRQ_TYPE_EDGE_RISING>;
|
||||
reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dragon_bmp085_gpios>;
|
||||
vddd-supply = <&pm8058_lvs0>; // 1.8V
|
||||
vdda-supply = <&pm8058_l14>; // 2.85V
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rpm@104000 {
|
||||
/*
|
||||
* Set up of the PMIC RPM regulators for this board
|
||||
* PM8901 supplies "preliminary regulators" whatever
|
||||
* that means
|
||||
*/
|
||||
pm8901-regulators {
|
||||
vdd_l0-supply = <&pm8901_s4>;
|
||||
vdd_l1-supply = <&vph>;
|
||||
vdd_l2-supply = <&vph>;
|
||||
vdd_l3-supply = <&vph>;
|
||||
vdd_l4-supply = <&vph>;
|
||||
vdd_l5-supply = <&vph>;
|
||||
vdd_l6-supply = <&vph>;
|
||||
/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
|
||||
vdd_s2-supply = <&vph>;
|
||||
vdd_s3-supply = <&vph>;
|
||||
vdd_s4-supply = <&vph>;
|
||||
lvs0_in-supply = <&pm8058_s3>;
|
||||
lvs1_in-supply = <&pm8901_s4>;
|
||||
lvs2_in-supply = <&pm8058_l0>;
|
||||
lvs3_in-supply = <&pm8058_s2>;
|
||||
mvs_in-supply = <&pm8058_s3>;
|
||||
|
||||
l0 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l1 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l2 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l3 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l4 {
|
||||
regulator-min-microvolt = <2600000>;
|
||||
regulator-max-microvolt = <2600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l5 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l6 {
|
||||
regulator-min-microvolt = <2200000>;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
/* s0 and s1 are SAW regulators controlled over SPM */
|
||||
s2 {
|
||||
regulator-min-microvolt = <1300000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
s3 {
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
s4 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
/* LVS0 thru 3 and mvs0 are just switches */
|
||||
lvs0 {
|
||||
regulator-always-on;
|
||||
};
|
||||
lvs1 { };
|
||||
lvs2 { };
|
||||
lvs3 { };
|
||||
mvs0 {};
|
||||
|
||||
};
|
||||
|
||||
pm8058-regulators {
|
||||
vdd_l0_l1_lvs-supply = <&pm8058_s3>;
|
||||
vdd_l2_l11_l12-supply = <&vph>;
|
||||
vdd_l3_l4_l5-supply = <&vph>;
|
||||
vdd_l6_l7-supply = <&vph>;
|
||||
vdd_l8-supply = <&vph>;
|
||||
vdd_l9-supply = <&vph>;
|
||||
vdd_l10-supply = <&vph>;
|
||||
vdd_l13_l16-supply = <&pm8058_s4>;
|
||||
vdd_l14_l15-supply = <&vph>;
|
||||
vdd_l17_l18-supply = <&vph>;
|
||||
vdd_l19_l20-supply = <&vph>;
|
||||
vdd_l21-supply = <&pm8058_s3>;
|
||||
vdd_l22-supply = <&pm8058_s3>;
|
||||
vdd_l23_l24_l25-supply = <&pm8058_s3>;
|
||||
vdd_s0-supply = <&vph>;
|
||||
vdd_s1-supply = <&vph>;
|
||||
vdd_s2-supply = <&vph>;
|
||||
vdd_s3-supply = <&vph>;
|
||||
vdd_s4-supply = <&vph>;
|
||||
vdd_ncp-supply = <&vph>;
|
||||
|
||||
l0 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l1 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l2 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l3 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l4 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l5 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l6 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l8 {
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <3050000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l9 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l10 {
|
||||
regulator-min-microvolt = <2600000>;
|
||||
regulator-max-microvolt = <2600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l11 {
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l12 {
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l13 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l14 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
l15 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
bias-pull-down;
|
||||
regulator-always-on;
|
||||
};
|
||||
l17 {
|
||||
// 1.5V according to schematic
|
||||
regulator-min-microvolt = <2600000>;
|
||||
regulator-max-microvolt = <2600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l18 {
|
||||
regulator-min-microvolt = <2200000>;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l19 {
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l20 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l21 {
|
||||
// 1.1 V according to schematic
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
bias-pull-down;
|
||||
regulator-always-on;
|
||||
};
|
||||
l22 {
|
||||
// 1.2 V according to schematic
|
||||
regulator-min-microvolt = <1150000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l23 {
|
||||
// Unused
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l24 {
|
||||
// Unused
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
l25 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
s0 {
|
||||
// regulator-min-microvolt = <500000>;
|
||||
// regulator-max-microvolt = <1325000>;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
s1 {
|
||||
// regulator-min-microvolt = <500000>;
|
||||
// regulator-max-microvolt = <1250000>;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
s2 {
|
||||
// 1.3 V according to schematic
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
s3 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
regulator-always-on;
|
||||
bias-pull-down;
|
||||
};
|
||||
s4 {
|
||||
regulator-min-microvolt = <2200000>;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
regulator-always-on;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
/* LVS0 and LVS1 are just switches */
|
||||
lvs0 {
|
||||
bias-pull-down;
|
||||
};
|
||||
lvs1 {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
ncp {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
amba {
|
||||
/* Internal 3.69 GiB eMMC */
|
||||
sdcc@12400000 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dragon_sdcc1_pins>;
|
||||
vmmc-supply = <&pm8901_l5>;
|
||||
vqmmc-supply = <&pm8901_lvs0>;
|
||||
};
|
||||
|
||||
/* External micro SD card, directly connected, pulled up to 2.85 V */
|
||||
sdcc@12180000 {
|
||||
status = "okay";
|
||||
/* Enable SSBI GPIO 22 as input, use for card detect */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
|
||||
cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
||||
vmmc-supply = <&pm8058_l14>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Second external micro SD card, using two TXB104RGYR levelshifters
|
||||
* to lift from 1.8 V to 2.85 V
|
||||
*/
|
||||
sdcc@12200000 {
|
||||
status = "okay";
|
||||
/* Enable SSBI GPIO 26 as input, use for card detect */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
|
||||
cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
|
||||
vmmc-supply = <&pm8058_l14>;
|
||||
vqmmc-supply = <&dragon_vio_txb>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user