mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-20 04:26:45 +07:00
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from BIPAI KEJI. Detailed hardware information for BPI-R2 which could be found on http://www.banana-pi.org/r2.html The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP table and thermal zone treating CPU as one of cooling devices and also added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART, SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing hardware and peripherals, they would be added and integrated continuously. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This commit is contained in:
Sean Wang
Matthias Brugger
parent
876680cf23
commit
f4ff257cd1
@ -49,6 +49,8 @@ Supported boards:
|
||||
- Reference board for MT7623n with NAND:
|
||||
Required root node properties:
|
||||
- compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
|
||||
- Bananapi BPI-R2 board:
|
||||
- compatible = "bananapi,bpi-r2", "mediatek,mt7623";
|
||||
- MTK mt8127 tablet moose EVB:
|
||||
Required root node properties:
|
||||
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
|
||||
|
||||
@ -1050,6 +1050,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
|
||||
mt6589-aquaris5.dtb \
|
||||
mt6592-evb.dtb \
|
||||
mt7623n-rfb-nand.dtb \
|
||||
mt7623n-bananapi-bpi-r2.dtb \
|
||||
mt8127-moose.dtb \
|
||||
mt8135-evbp1.dtb
|
||||
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
|
||||
|
||||
@ -21,12 +21,58 @@
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/phy/phy.h>
|
||||
#include <dt-bindings/reset/mt2701-resets.h>
|
||||
#include <dt-bindings/thermal/thermal.h>
|
||||
#include "skeleton64.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "mediatek,mt7623";
|
||||
interrupt-parent = <&sysirq>;
|
||||
|
||||
cpu_opp_table: opp_table {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp-98000000 {
|
||||
opp-hz = /bits/ 64 <98000000>;
|
||||
opp-microvolt = <1050000>;
|
||||
};
|
||||
|
||||
opp-198000000 {
|
||||
opp-hz = /bits/ 64 <198000000>;
|
||||
opp-microvolt = <1050000>;
|
||||
};
|
||||
|
||||
opp-398000000 {
|
||||
opp-hz = /bits/ 64 <398000000>;
|
||||
opp-microvolt = <1050000>;
|
||||
};
|
||||
|
||||
opp-598000000 {
|
||||
opp-hz = /bits/ 64 <598000000>;
|
||||
opp-microvolt = <1050000>;
|
||||
};
|
||||
|
||||
opp-747500000 {
|
||||
opp-hz = /bits/ 64 <747500000>;
|
||||
opp-microvolt = <1050000>;
|
||||
};
|
||||
|
||||
opp-1040000000 {
|
||||
opp-hz = /bits/ 64 <1040000000>;
|
||||
opp-microvolt = <1150000>;
|
||||
};
|
||||
|
||||
opp-1196000000 {
|
||||
opp-hz = /bits/ 64 <1196000000>;
|
||||
opp-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
opp-1300000000 {
|
||||
opp-hz = /bits/ 64 <1300000000>;
|
||||
opp-microvolt = <1300000>;
|
||||
};
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
@ -36,21 +82,31 @@ cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a7";
|
||||
reg = <0x0>;
|
||||
clocks = <&infracfg CLK_INFRA_CPUSEL>,
|
||||
<&apmixedsys CLK_APMIXED_MAINPLL>;
|
||||
clock-names = "cpu", "intermediate";
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
#cooling-cells = <2>;
|
||||
cooling-min-level = <0>;
|
||||
cooling-max-level = <7>;
|
||||
};
|
||||
cpu1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a7";
|
||||
reg = <0x1>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
};
|
||||
cpu2: cpu@2 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a7";
|
||||
reg = <0x2>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
};
|
||||
cpu3: cpu@3 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a7";
|
||||
reg = <0x3>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -74,6 +130,56 @@ clk26m: oscillator@0 {
|
||||
clock-output-names = "clk26m";
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
cpu_thermal: cpu_thermal {
|
||||
polling-delay-passive = <1000>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&thermal 0>;
|
||||
|
||||
trips {
|
||||
cpu_passive: cpu_passive {
|
||||
temperature = <47000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_active: cpu_active {
|
||||
temperature = <67000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
cpu_hot: cpu_hot {
|
||||
temperature = <87000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
cpu_crit {
|
||||
temperature = <107000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
trip = <&cpu_passive>;
|
||||
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
map1 {
|
||||
trip = <&cpu_active>;
|
||||
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
map2 {
|
||||
trip = <&cpu_hot>;
|
||||
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv7-timer";
|
||||
interrupt-parent = <&gic>;
|
||||
@ -172,7 +278,7 @@ pwrap: pwrap@1000d000 {
|
||||
clock-names = "spi", "wrap";
|
||||
};
|
||||
|
||||
cir: cir@0x10013000 {
|
||||
cir: cir@10013000 {
|
||||
compatible = "mediatek,mt7623-cir";
|
||||
reg = <0 0x10013000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
|
||||
@ -193,7 +299,7 @@ sysirq: interrupt-controller@10200100 {
|
||||
efuse: efuse@10206000 {
|
||||
compatible = "mediatek,mt7623-efuse",
|
||||
"mediatek,mt8173-efuse";
|
||||
reg = <0 0x10206000 0 0x1000>;
|
||||
reg = <0 0x10206000 0 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
thermal_calibration_data: calib@424 {
|
||||
@ -561,7 +667,8 @@ usb1: usb@1a1c0000 {
|
||||
};
|
||||
|
||||
u3phy1: usb-phy@1a1c4000 {
|
||||
compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
|
||||
compatible = "mediatek,mt7623-u3phy",
|
||||
"mediatek,mt2701-u3phy";
|
||||
reg = <0 0x1a1c4000 0 0x0700>;
|
||||
clocks = <&clk26m>;
|
||||
clock-names = "u3phya_ref";
|
||||
@ -599,7 +706,8 @@ usb2: usb@1a240000 {
|
||||
};
|
||||
|
||||
u3phy2: usb-phy@1a244000 {
|
||||
compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
|
||||
compatible = "mediatek,mt7623-u3phy",
|
||||
"mediatek,mt2701-u3phy";
|
||||
reg = <0 0x1a244000 0 0x0700>;
|
||||
clocks = <&clk26m>;
|
||||
clock-names = "u3phya_ref";
|
||||
@ -639,7 +747,9 @@ ethsys: syscon@1b000000 {
|
||||
};
|
||||
|
||||
eth: ethernet@1b100000 {
|
||||
compatible = "mediatek,mt2701-eth", "syscon";
|
||||
compatible = "mediatek,mt7623-eth",
|
||||
"mediatek,mt2701-eth",
|
||||
"syscon";
|
||||
reg = <0 0x1b100000 0 0x20000>;
|
||||
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
|
||||
|
||||
443
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
Normal file
443
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
Normal file
@ -0,0 +1,443 @@
|
||||
/*
|
||||
* Copyright 2017 Sean Wang <sean.wang@mediatek.com>
|
||||
*
|
||||
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "mt7623.dtsi"
|
||||
#include "mt6323.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Bananapi BPI-R2";
|
||||
compatible = "bananapi,bpi-r2", "mediatek,mt7623";
|
||||
|
||||
aliases {
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
};
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
proc-supply = <&mt6323_vproc_reg>;
|
||||
};
|
||||
|
||||
cpu@1 {
|
||||
proc-supply = <&mt6323_vproc_reg>;
|
||||
};
|
||||
|
||||
cpu@2 {
|
||||
proc-supply = <&mt6323_vproc_reg>;
|
||||
};
|
||||
|
||||
cpu@3 {
|
||||
proc-supply = <&mt6323_vproc_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&key_pins_a>;
|
||||
|
||||
factory {
|
||||
label = "factory";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_pins_a>;
|
||||
|
||||
red {
|
||||
label = "bpi-r2:pio:red";
|
||||
gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
green {
|
||||
label = "bpi-r2:pio:green";
|
||||
gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
blue {
|
||||
label = "bpi-r2:pio:blue";
|
||||
gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
reg = <0 0x80000000 0 0x40000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&cir {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cir_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "trgmii";
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
mdio: mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
switch@0 {
|
||||
compatible = "mediatek,mt7530";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&pio 33 0>;
|
||||
core-supply = <&mt6323_vpa_reg>;
|
||||
io-supply = <&mt6323_vemc3v3_reg>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan0";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
label = "cpu";
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "trgmii";
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
cir_pins_a:cir@0 {
|
||||
pins_cir {
|
||||
pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c0_pins_a: i2c@0 {
|
||||
pins_i2c0 {
|
||||
pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
|
||||
<MT7623_PIN_76_SCL0_FUNC_SCL0>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c1_pins_a: i2c@1 {
|
||||
pin_i2c1 {
|
||||
pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
|
||||
<MT7623_PIN_58_SCL1_FUNC_SCL1>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2s0_pins_a: i2s@0 {
|
||||
pin_i2s0 {
|
||||
pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
|
||||
<MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
|
||||
<MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
|
||||
<MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
|
||||
<MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
|
||||
drive-strength = <MTK_DRIVE_12mA>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
i2s1_pins_a: i2s@1 {
|
||||
pin_i2s1 {
|
||||
pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
|
||||
<MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
|
||||
<MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
|
||||
<MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
|
||||
<MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
|
||||
drive-strength = <MTK_DRIVE_12mA>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
key_pins_a: keys@0 {
|
||||
pins_keys {
|
||||
pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
|
||||
<MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins_a: leds@0 {
|
||||
pins_leds {
|
||||
pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
|
||||
<MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
|
||||
<MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc0_pins_default: mmc0default {
|
||||
pins_cmd_dat {
|
||||
pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
|
||||
<MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
|
||||
<MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
|
||||
<MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
|
||||
<MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
|
||||
<MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
|
||||
<MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
|
||||
<MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
|
||||
<MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pins_clk {
|
||||
pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pins_rst {
|
||||
pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
mmc0_pins_uhs: mmc0 {
|
||||
pins_cmd_dat {
|
||||
pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
|
||||
<MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
|
||||
<MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
|
||||
<MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
|
||||
<MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
|
||||
<MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
|
||||
<MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
|
||||
<MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
|
||||
<MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
|
||||
input-enable;
|
||||
drive-strength = <MTK_DRIVE_2mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
|
||||
pins_clk {
|
||||
pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
|
||||
drive-strength = <MTK_DRIVE_2mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
|
||||
pins_rst {
|
||||
pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
mmc1_pins_default: mmc1default {
|
||||
pins_cmd_dat {
|
||||
pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
|
||||
<MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
|
||||
<MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
|
||||
<MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
|
||||
<MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
|
||||
input-enable;
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
||||
};
|
||||
|
||||
pins_clk {
|
||||
pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
|
||||
bias-pull-down;
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc1_pins_uhs: mmc1 {
|
||||
pins_cmd_dat {
|
||||
pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
|
||||
<MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
|
||||
<MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
|
||||
<MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
|
||||
<MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
|
||||
input-enable;
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
||||
};
|
||||
|
||||
pins_clk {
|
||||
pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
||||
};
|
||||
};
|
||||
|
||||
spi0_pins_a: spi@0 {
|
||||
pins_spi {
|
||||
pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
|
||||
<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
|
||||
<MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
|
||||
<MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_pins_a: pwm@0 {
|
||||
pins_pwm {
|
||||
pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
|
||||
<MT7623_PIN_204_PWM1_FUNC_PWM1>,
|
||||
<MT7623_PIN_205_PWM2_FUNC_PWM2>,
|
||||
<MT7623_PIN_206_PWM3_FUNC_PWM3>,
|
||||
<MT7623_PIN_207_PWM4_FUNC_PWM4>;
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins_a: uart@0 {
|
||||
pins_dat {
|
||||
pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
|
||||
<MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
|
||||
};
|
||||
};
|
||||
|
||||
uart1_pins_a: uart@1 {
|
||||
pins_dat {
|
||||
pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
|
||||
<MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwrap {
|
||||
mt6323 {
|
||||
mt6323led: led {
|
||||
compatible = "mediatek,mt6323-led";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
label = "bpi-r2:isink:green";
|
||||
default-state = "off";
|
||||
};
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
label = "bpi-r2:isink:red";
|
||||
default-state = "off";
|
||||
};
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
label = "bpi-r2:isink:blue";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins_a>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&u3phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u3phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins_a>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
vusb33-supply = <&mt6323_vusb_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
vusb33-supply = <&mt6323_vusb_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user