We are currently using a mix of platform name and acronym to name the
functions. Let's prefer the acronym as it should be clear what platform
it's about and it's shorter, so it doesn't go over 80 columns in a few
cases. This converts skylake to skl where appropriate.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224084012.24241-4-lucas.demarchi@intel.com
In record defaults, if we emit a request we expect a context switck on
parking. We need take no further action, so don't even mess with the low
level engine->serial where it is not warranted.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191225230703.2498794-1-chris@chris-wilson.co.uk
Add a space between the prefixed format and the users format so that the
join are not mistakenly combined into one long word.
Fixes: 639f2f2489 ("drm/i915: Introduce new macros for tracing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191223204411.2355304-1-chris@chris-wilson.co.uk
Our goal in wait_for_idle (intel_gt_retire_requests) is to the current
workload *and* their idle barriers. This requires us to notice the late
arrival of those, which is done by inspecting the list of active
timelines. However, if a concurrent retirer is running that new timeline
may not be added until after we drop the lock -- so flush concurrent
retirers before we take the lock and inspect the list.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/878
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191223211008.2371613-1-chris@chris-wilson.co.uk
The only protection for intel_context.gem_cotext is granted by RCU, so
annotate it as a rcu protected pointer and carefully dereference it in
the few occasions we need to use it.
Fixes: 9f3ccd40ac ("drm/i915: Drop GEM context as a direct link from i915_request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222233558.2201901-1-chris@chris-wilson.co.uk
For very light workloads that frequently park, acquiring the display
power well (required to prevent the dmc from trashing the system) takes
longer than the execution. A good example is the igt_coherency selftest,
which is slowed down by an order of magnitude in the worst case with
powerwell cycling. To prevent frequent cycling, while keeping our fast
soft-rc6, use a timer to delay release of the display powerwell.
Fixes: 311770173f ("drm/i915/gt: Schedule request retirement when timeline idles")
References: https://gitlab.freedesktop.org/drm/intel/issues/848
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218093504.3477048-1-chris@chris-wilson.co.uk
(cherry picked from commit 81ff52b705)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The GT system is becoming more and more a stand-alone system in
i915 and it's fair to assign it its own debugfs directory.
rc6, rps and llc debugfs files are gt related, move them into the
gt debugfs directory.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222144046.1674865-3-chris@chris-wilson.co.uk
Since intel_gt_resume() is always immediately proceeded by init_hw, pull
the call into intel_gt_resume, where we have the rpm and fw already
held.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222144046.1674865-1-chris@chris-wilson.co.uk
Begin pulling the GT setup underneath a single GT umbrella; let intel_gt
take ownership of its engines! As hinted, the complication is the
lifetime of the probed engine versus the active lifetime of the GT
backends. We need to detect the engine layout early and keep it until
the end so that we can sanitize state on takeover and release.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222120752.1368352-1-chris@chris-wilson.co.uk
Since we may retire timelines from secondary workers,
intel_gt_retire_requests() is not always a reliable indicator that all
pending retirements are complete. If we do detect secondary workers are
in progress, recommend intel_gt_wait_for_idle() to repeat the retirement
check.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221180204.1201217-1-chris@chris-wilson.co.uk
Allocate only an internal intel_context for the kernel_context, forgoing
a global GEM context for internal use as we only require a separate
address space (for our own protection).
Now having weaned GT from requiring ce->gem_context, we can stop
referencing it entirely. This also means we no longer have to create random
and unnecessary GEM contexts for internal use.
GEM contexts are now entirely for tracking GEM clients, and intel_context
the execution environment on the GPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221160324.1073045-1-chris@chris-wilson.co.uk
Decide whether or not we need to disable arbitration within user batches
based on our intel_engine_has_preemption() flag.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213151331.1788371-1-chris@chris-wilson.co.uk
Instead of rummaging through the intel_context to peek at the GEM
context in the middle of request submission to decide whether to use
semaphores, store that information on the intel_context itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191220101230.256839-2-chris@chris-wilson.co.uk
Keep the intel_context as being the primary state for i915_request, with
the GEM context a backpointer from the low level state for the rarer
cases we need client information. Our goal is to remove such references
to clients from the backend, and leave the HW submission agnostic to
client interfaces and self-contained.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191220101230.256839-1-chris@chris-wilson.co.uk
Since we added the context_alloc callback to intel_context_ops, we can
safely install a custom hook for the deferred virtual context allocation.
This means that all new contexts behave the same upon creation,
simplifying later code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219232932.189197-1-chris@chris-wilson.co.uk
Avoid adding the retire workers to the virtual engine so that we don't
end up in the unenviable situation of trying to free the virtual engine
while its worker remains active.
Fixes: dc93c9b693 ("drm/i915/gt: Schedule request retirement when signaler idles")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/867
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219221344.161523-1-chris@chris-wilson.co.uk
When we park RPS, we set the GPU to run at minimum 'idle' frequency.
However, as the GPU is idle, we also disable the worker and RPS
interrupts - changing the RPS thresholds has no effect, it just incurs
extra changes to restore them when we unpark. So on parking, leave the
thresholds set to the current power level and so we expect them to be
valid for our restart.
References: https://gitlab.freedesktop.org/drm/intel/issues/848
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218210545.3975426-2-chris@chris-wilson.co.uk
Use non-forcewaked writes to queue RPS register changes that will take
effect when the write buffer is flushed, rather than wake the mmio
device for immediate effect. This is so that we can avoid a slow
forcewake dance upon unparking, and at our irregular updates.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218210545.3975426-1-chris@chris-wilson.co.uk
Knowing the round trip time of an engine is useful for tracking the
health of the system as well as providing a metric for the baseline
responsiveness of the engine. We can use the latter metric for
automatically tuning our waits in selftests and when idling so we don't
confuse a slower system with a dead one.
Upon idling the engine, we send one last pulse to switch the context
away from precious user state to the volatile kernel context. We know
the engine is idle at this point, and the pulse is non-preemptible, so
this provides us with a good measurement of the round trip time. It also
provides us with faster engine parking for ringbuffer submission, which
is a welcome bonus (e.g. softer-rc6).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219105043.4169050-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20191219124353.8607-2-chris@chris-wilson.co.uk
Very similar to commit 4f88f8747f ("drm/i915/gt: Schedule request
retirement when timeline idles"), but this time instead of coupling into
the execlists CS event interrupt, we couple into the breadcrumb
interrupt and queue a timeline's retirement when the last signaler is
completed. This should allow us to more rapidly park ringbuffer
submission, and so help reduce power consumption on older systems.
v2: Fixup intel_engine_add_retire() to handle concurrent callers
References: 4f88f8747f ("drm/i915/gt: Schedule request retirement when timeline idles")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219124353.8607-1-chris@chris-wilson.co.uk
Only signal the breadcrumbs from inside the irq_work, simplifying our
interface and calling conventions. The micro-optimisation here is that
by always using the irq_work interface, we know we are always inside an
irq-off critical section for the breadcrumb signaling and can ellide
save/restore of the irq flags.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217095642.3124521-7-chris@chris-wilson.co.uk
For very light workloads that frequently park, acquiring the display
power well (required to prevent the dmc from trashing the system) takes
longer than the execution. A good example is the igt_coherency selftest,
which is slowed down by an order of magnitude in the worst case with
powerwell cycling. To prevent frequent cycling, while keeping our fast
soft-rc6, use a timer to delay release of the display powerwell.
Fixes: 311770173f ("drm/i915/gt: Schedule request retirement when timeline idles")
References: https://gitlab.freedesktop.org/drm/intel/issues/848
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218093504.3477048-1-chris@chris-wilson.co.uk
The Gen11+ and the legacy function differ in the register and value
written to interrupt the GuC. However, while on older gen the value
matches a bit on the register, on Gen11+ the value is a SW defined
payload that is sent to the FW. Since the FW behaves the same no matter
what value we pass to it, we can just write the same thing on all gens
and get rid of the function pointer by saving the register offset.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-6-daniele.ceraolospurio@intel.com
Since we started using CT buffers on all gens, the function pointers can
only be set to either the _nop() or the _ct() functions. Since the
_nop() case applies to when the CT are disabled, we can just handle that
case in the _ct() functions and call them directly.
v2: keep intel_guc_send() and make the CT send/receive functions work on
intel_guc_ct. (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-5-daniele.ceraolospurio@intel.com
For better isolation of the request tracking from the rest of the
CT-related data.
v2: split to separate patch, move next_fence to substructure (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-4-daniele.ceraolospurio@intel.com
The GuC supports having multiple CT buffer pairs and we designed our
implementation with that in mind. However, the different channels are not
processed in parallel within the GuC, so there is very little advantage
in having multiple channels (independent locks?), compared to the
drawbacks (one channel can starve the other if messages keep being
submitted to it). Given this, it is unlikely we'll ever add a second
channel and therefore we can simplify our code by removing the
flexibility.
v2: split substructure grouping to separate patch, improve docs (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-3-daniele.ceraolospurio@intel.com
We track the status of the GuC much more closely now and we expect the
enable/disable functions to be correctly called only once. If this isn't
true we do want to flag it as a flow failure (via the BUG_ON in the ctch
functions) and not silently ignore the call.
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-2-daniele.ceraolospurio@intel.com
The only difference from the GuC POV between guc_communication_stop and
guc_communication_disable is that the former can be called after GuC
has been reset. Instead of having two separate paths, we can just skip
the call into GuC in the disabling path and re-use that.
Note that by using the disable() path instead of the stop() one there
are two additional changes in SW side for the stop path:
- interrupts are now disabled before disabling the CT, which is ok
because we do not want interrupts with CT disabled;
- guc_get_mmio_msg() is called in the stop case as well, which is ok
because if there are errors before the reset we do want to record
them.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-1-daniele.ceraolospurio@intel.com
As we stash a pointer to the HWSP cacheline on the request, when reading
it we only need confirm that the cacheline is still valid by checking
that the request and timeline are still intact.
v2: Protect hwsp_cachline with RCU
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217011659.3092130-1-chris@chris-wilson.co.uk
Sandybridge is the gen that didn't handle multiple registers in a single
LRI packet. Don't forget it!
Fixes: 902eb748e5 ("drm/i915/gt: Tidy up full-ppgtt on Ivybridge")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Tested-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217091328.3093551-1-chris@chris-wilson.co.uk
With a couple more memory barriers dotted around the place we can
significantly reduce the MTBF on Ivybridge. Still doesn't really help
Haswell though.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191216142409.2605211-1-chris@chris-wilson.co.uk
typecheck() macro creates an huge stack size causing
issues with static analysis with coverity, addressing
this with creating a local pointer.
Fixes: 639f2f2489 ("drm/i915: Introduce new macros for tracing")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191216185332.83289-1-venkata.s.dhanalakota@intel.com
Add two helpers that for reading the actual GT's frequency. The
two helpers are:
- intel_rps_read_cagf: reads the frequency and returns it not
normalized
- intel_rps_read_actual_frequency: provides the frequency in Hz.
Use the above helpers in sysfs and debugfs.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213183736.31992-2-andi@etezian.org
While not good behaviour, it is, however, established behaviour that we
can punt EAGAIN to userspace if we need to retry the ioctl. When trying
to acquire a mutex, prefer to use EAGAIN to propagate losing the race
so that if it does end up back in userspace, we try again.
Fixes: c81471f5e9 ("drm/i915: Copy across scheduler behaviour flags across submit fences")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/800
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213160347.1789004-1-chris@chris-wilson.co.uk
New macros ENGINE_TRACE(), CE_TRACE(), RQ_TRACE() and
GT_TRACE() are introduce to tag device name and engine
name with contexts and requests tracing in i915.
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213155152.69182-2-venkata.s.dhanalakota@intel.com
The gen7 cmdparser is primarily a promotion-based system to allow access
to additional registers beyond the HW validation, and allows fallback to
normal execution of the user batch buffer if valid and requires
chaining. In the next patch, we will do the cmdparser validation in the
pipeline asynchronously and so at the point of request construction we
will not know if we want to execute the privileged and validated batch,
or the original user batch. The solution employed here is to execute
both batches, one with raised privileges and one as normal. This is
because the gen7 MI_BATCH_BUFFER_START command cannot change privilege
level within a batch and must strictly use the current privilege level
(or undefined behaviour kills the GPU). So in order to execute the
original batch, we need a second non-priviledged batch buffer chain from
the ring, i.e. we need to emit two batches for each user batch. Inside
the two batches we determine which one should actually execute, we
provide a conditional trampoline to call the original batch.
Implementation-wise, we create a single buffer and write the shadow and
the trampoline inside it at different offsets; and bind the buffer into
both the kernel GGTT for the privileged execution of the shadow and into
the user ppGTT for the non-privileged execution of the trampoline and
original batch. One buffer, two batches and two vma.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211230858.599030-1-chris@chris-wilson.co.uk
An oversight in that we use rc6->ctl_enable to disable rc6 on gen9 and
so it does not simply indicate indirect control via a PCU. Switch the
rc6->ctl_enable check for a platform-based check.
Fixes: 972745fd57 ("drm/i915/gt: Disable manual rc6 for Braswell/Baytrail")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212072737.884335-2-chris@chris-wilson.co.uk
The initial investigated showed that while the PCU on Braswell/Baytrail
controlled RC6 itself. setting the software RC6 request made no
difference. Further testing reveals though that it causes a delay in the
PCU on enabling RC6.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/763
Fixes: 730eaeb524 ("drm/i915/gt: Manual rc6 entry upon parking")
Testcase: igt/perf/rc6-disable
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210180111.3958558-1-chris@chris-wilson.co.uk
There is no need to pass explicit ggtt since we already have
a trick to get parent gt from uc_fw, we only need to use it.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211124549.59516-4-michal.wajdeczko@intel.com
There is no need to pass explicit gt since we already have
a trick to get parent gt from uc_fw, we only need to use it.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211124549.59516-3-michal.wajdeczko@intel.com
There is no need to pass explicit i915 since we already have
a debug trick to get parent gt from uc_fw, we only need to
make this trick available on non-debug builds.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211124549.59516-2-michal.wajdeczko@intel.com
Check that we own the global pointer before deregistering.
Reported-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210153620.3929372-1-chris@chris-wilson.co.uk
Currently the variable sum is not uninitialized and hence will cause an
incorrect result in the summation values. Fix this by initializing
sum to the first item in the summation.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 3c7a44bbbf ("drm/i915/selftests: Perform some basic cycle counting of MI ops")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210143205.338308-1-colin.king@canonical.com
In order to avoid confusing the HW, we must never submit an empty ring
during lite-restore, that is we should always advance the RING_TAIL
before submitting to stay ahead of the RING_HEAD.
Normally this is prevented by keeping a couple of spare NOPs in the
request->wa_tail so that on resubmission we can advance the tail. This
relies on the request only being resubmitted once, which is the normal
condition as it is seen once for ELSP[1] and then later in ELSP[0]. On
preemption, the requests are unwound and the tail reset back to the
normal end point (as we know the request is incomplete and therefore its
RING_HEAD is even earlier).
However, if this w/a should fail we would try and resubmit the request
with the RING_TAIL already set to the location of this request's wa_tail
potentially causing a GPU hang. We can spot when we do try and
incorrectly resubmit without advancing the RING_TAIL and spare any
embarrassment by forcing the context restore.
In the case of preempt-to-busy, we leave the requests running on the HW
while we unwind. As the ring is still live, we cannot rewind our
rq->tail without forcing a reload so leave it set to rq->wa_tail and
only force a reload if we resubmit after a lite-restore. (Normally, the
forced reload will be a part of the preemption event.)
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/673
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@kernel.vger.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191209023215.3519970-1-chris@chris-wilson.co.uk
(cherry picked from commit 82c69bf586)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In order to avoid confusing the HW, we must never submit an empty ring
during lite-restore, that is we should always advance the RING_TAIL
before submitting to stay ahead of the RING_HEAD.
Normally this is prevented by keeping a couple of spare NOPs in the
request->wa_tail so that on resubmission we can advance the tail. This
relies on the request only being resubmitted once, which is the normal
condition as it is seen once for ELSP[1] and then later in ELSP[0]. On
preemption, the requests are unwound and the tail reset back to the
normal end point (as we know the request is incomplete and therefore its
RING_HEAD is even earlier).
However, if this w/a should fail we would try and resubmit the request
with the RING_TAIL already set to the location of this request's wa_tail
potentially causing a GPU hang. We can spot when we do try and
incorrectly resubmit without advancing the RING_TAIL and spare any
embarrassment by forcing the context restore.
In the case of preempt-to-busy, we leave the requests running on the HW
while we unwind. As the ring is still live, we cannot rewind our
rq->tail without forcing a reload so leave it set to rq->wa_tail and
only force a reload if we resubmit after a lite-restore. (Normally, the
forced reload will be a part of the preemption event.)
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/673
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@kernel.vger.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191209023215.3519970-1-chris@chris-wilson.co.uk
We now only use 1 client without any plan to add more. The client is
also only holding information about the WQ and the process desc, so we
can just move those in the intel_guc structure and always use stage_id
0.
v2: fix comment (John)
v3: fix the comment for real, fix kerneldoc
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-4-daniele.ceraolospurio@intel.com
Instead of relying on the workqueue, the upcoming reworked GuC
submission flow will offer the host driver indipendent control over
the execution status of each context submitted to GuC. As part of this,
the doorbell usage model has been reworked, with each doorbell being
paired to a single lrc and a doorbell ring representing new work
available for that specific context. This mechanism, however, limits
the number of contexts that can be registered with GuC to the number of
doorbells, which is an undesired limitation. To avoid this limitation,
we requested the GuC team to also provide a H2G that will allow the host
to notify the GuC of work available for a specified lrc, so we can use
that mechanism instead of relying on the doorbells. We can therefore drop
the doorbell code we currently have, also given the fact that in the
unlikely case we'd want to switch back to using doorbells we'd have to
heavily rework it.
The workqueue will still have a use in the new interface to pass special
commands, so that code has been retained for now.
With the doorbells gone and the GuC client becoming even simpler, the
existing GuC selftests don't give us any meaningful coverage so we can
remove them as well. Some selftests might come with the new code, but
they will look different from what we have now so if doesn't seem worth
it to keep the file around in the meantime.
v2: fix comments and commit message (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-3-daniele.ceraolospurio@intel.com
We already have a couple of use-cases in the code and another one will
come in one of the later patches in the series.
v2: use the new function for the CT object as well
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-2-daniele.ceraolospurio@intel.com
Remove unused enums and ctx_save_restore_disabled() function, leftover
from the legacy preemption removal.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-1-daniele.ceraolospurio@intel.com
"Have you tried switching it off and on again?"
Set the size of the mm to 0 to disable all PD cachelines, before
enabling the whole mm again. Let's see if that tricks the TLB into
reloading.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191208143648.2986669-1-chris@chris-wilson.co.uk
The preferred way to access the uncore is through the GT structure.
Update the GuC function, flush_ggtt_writes, to use this path.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207010033.24667-1-John.C.Harrison@Intel.com
msm-next:
- OCMEM support for a3xx and a4xx GPUs.
- a510 support + display support
core:
- mst payload deletion fix
i915:
- uapi alignment fix
- fix for power usage regression due to security fixes
- change default preemption timeout to 640ms from 100ms
- EHL voltage level display fixes
- TGL DGL PHY fix
- gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
- CI spotted deadlock fix
- EHL port D programming fix
amdgpu:
- VRAM lost fixes on BACO for CI/VI
- navi14 DC fixes
- misc SR-IOV, gfx10 fixes
- XGMI fixes for arcturus
- SRIOV fixes
amdkfd:
- KFD on ppc64le enabled
- page table optimisations
radeon:
- fix for r1xx/2xx register checker.
tegra:
- displayport regression fixes
- DMA API regression fixes
mgag200:
- fix devices that can't scanout except at 0 addr
omap:
- fix dma_addr refcounting
-----BEGIN PGP SIGNATURE-----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=3cs2
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Dave Airlie:
"Rob pointed out I missed his pull request for msm-next, it's been in
next for a while outside of my tree so shouldn't cause any unexpected
issues, it has some OCMEM support in drivers/soc that is acked by
other maintainers as it's outside my tree.
Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with
some tegra, omap, mgag200 and one core fix.
Summary:
msm-next:
- OCMEM support for a3xx and a4xx GPUs.
- a510 support + display support
core:
- mst payload deletion fix
i915:
- uapi alignment fix
- fix for power usage regression due to security fixes
- change default preemption timeout to 640ms from 100ms
- EHL voltage level display fixes
- TGL DGL PHY fix
- gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
- CI spotted deadlock fix
- EHL port D programming fix
amdgpu:
- VRAM lost fixes on BACO for CI/VI
- navi14 DC fixes
- misc SR-IOV, gfx10 fixes
- XGMI fixes for arcturus
- SRIOV fixes
amdkfd:
- KFD on ppc64le enabled
- page table optimisations
radeon:
- fix for r1xx/2xx register checker.
tegra:
- displayport regression fixes
- DMA API regression fixes
mgag200:
- fix devices that can't scanout except at 0 addr
omap:
- fix dma_addr refcounting"
* tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits)
drm/dp_mst: Correct the bug in drm_dp_update_payload_part1()
drm/omap: fix dma_addr refcounting
drm/tegra: Run hub cleanup on ->remove()
drm/tegra: sor: Make the +5V HDMI supply optional
drm/tegra: Silence expected errors on IOMMU attach
drm/tegra: vic: Export module device table
drm/tegra: sor: Implement system suspend/resume
drm/tegra: Use proper IOVA address for cursor image
drm/tegra: gem: Remove premature import restrictions
drm/tegra: gem: Properly pin imported buffers
drm/tegra: hub: Remove bogus connection mutex check
ia64: agp: Replace empty define with do while
agp: Add bridge parameter documentation
agp: remove unused variable num_segments
agp: move AGPGART_MINOR to include/linux/miscdevice.h
agp: remove unused variable size in agp_generic_create_gatt_table
drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n
drm/radeon: fix r1xx/r2xx register checker for POT textures
drm/amdgpu: fix GFX10 missing CSIB set(v3)
drm/amdgpu: should stop GFX ring in hw_fini
...
Get rid of the last remaining I915_READ in gt/ and make gt-land
the first I915_READ-free happy island.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205164422.727968-1-chris@chris-wilson.co.uk
This is really just an alias of mmap_gtt. The 'mmap offset' nomenclature
comes from the value returned by this ioctl which is the offset into the
device fd which userpace uses with mmap(2).
mmap_gtt was our initial mmap_offset implementation, this extends
our CPU mmap support to allow additional fault handlers that depends on
the object's backing pages.
Note that we multiplex mmap_gtt and mmap_offset through the same ioctl,
and use the zero extending behaviour of drm to differentiate between
them, when we inspect the flags.
To support multiple mmap types on an object we need to support multiple
mmap_offsets for an object (each offset in the global device address
space corresponding to a unique instance of the object for a file + mmap
type). As we drop the simplified drm core idea of a single mmap_offset,
we need to provide replacement hooks for the dumb mmap interface as
well.
Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/1675
Testcase: igt/gem_mmap_offset
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204120032.3682839-1-chris@chris-wilson.co.uk
Rather than assume if and only if the engine->default_state is not set
that the context is invalid, instead track when we know the context has
valid state -- either because we have copied the default_state or we
have completed a context switch to save the HW state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203124155.3019926-1-chris@chris-wilson.co.uk
Only along the submission path can we guarantee that the locked request
is indeed from a foreign engine, and so the nesting of engine/rq is
permissible. On the submission tasklet (process_csb()), we may find
ourselves competing with the normal nesting of rq/engine, invalidating
our nesting. As we only use the spinlock for debug purposes, skip the
debug if we cannot acquire the spinlock for safe validation - catching
99% of the bugs is better than causing a hard lockup.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: c95d31c3df ("drm/i915/execlists: Lock the request while validating it during promotion")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203152631.3107653-2-chris@chris-wilson.co.uk
After much hair pulling, resort to preallocating the ppGTT entries on
init to circumvent the apparent lack of PD invalidate following the
write to PP_DCLV upon switching mm between contexts (and here the same
context after binding new objects). However, the details of that PP_DCLV
invalidate are still unknown, and it appears we need to reload the mm
twice to cover over a timing issue. Worrying.
Fixes: 3dc007fe9b ("drm/i915/gtt: Downgrade gen7 (ivb, byt, hsw) back to aliasing-ppgtt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129201328.1398583-1-chris@chris-wilson.co.uk
As we only cancel the timers asynchronously, they may
still be running on another CPU as we shutdown, raising one last
softirq. So be safe and make sure the tasklet is flushed before
destroying the engine's memory.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129172542.1222810-1-chris@chris-wilson.co.uk
Implement Wa_1604555607 (set the DS pairing timer to 128 cycles).
FF_MODE2 is part of the register state context, that's why it is
implemented here.
At TGL A0 stepping, FF_MODE2 register read back is broken, hence
disabling the WA verification.
v2: Rebased on top of the WA refactoring (Oscar)
v3: Correctly add to ctx_workarounds_init (Michel)
v4:
uncore read is used [Tvrtko]
Macros as used for MASK definition [Chris]
v5:
Skip the Wa_1604555607 verification [Ram]
i915 ptr retrieved from engine. [Tvrtko]
v6:
Added wa_add as a wrapper for __wa_add [Chris]
wa_add is directly called instead of new wrapper [tvrtko]
BSpec: 19363
HSDES: 1604555607
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Ramalingam C <ramlingam.c@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v5]
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128021005.3350-1-ramalingam.c@intel.com
-----BEGIN PGP SIGNATURE-----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=Hj7G
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Lots of stuff in here, though it hasn't been too insane this merge
apart from dealing with the security fun.
uapi:
- export different colorspace properties on DP vs HDMI
- new fourcc for ARM 16x16 block format
- syncobj: allow querying last submitted timeline value
- DRM_FORMAT_BIG_ENDIAN defined as unsigned
core:
- allow using gem vma manager in ttm
- connector/encoder/bridge doc fixes
- allow more than 3 encoders for a connector
- displayport mst suspend/resume reprobing support
- vram lazy unmapping, uniform vram mm and gem vram
- edid cleanups + AVI informframe bar info
- displayport helpers - dpcd parser added
dp_cec:
- Allow a connector to be associated with a cec device
ttm:
- pipelining with no_gpu_wait fix
- always keep BOs on the LRU
sched:
- allow free_job routine to sleep
i915:
- Block userptr from mappable GTT
- i915 perf uapi versioning
- OA stream dynamic reconfiguration
- make context persistence optional
- introduce DRM_I915_UNSTABLE Kconfig
- add fake lmem testing under unstable
- BT.2020 support for DP MSA
- struct mutex elimination
- Tigerlake display/PLL/power management improvements
- Jasper Lake PCH support
- refactor PMU for multiple GPUs
- Icelake firmware update
- Split out vga + switcheroo code
amdgpu:
- implement dma-buf import/export without helpers
- vega20 RAS enablement
- DC i2c over aux fixes
- renoir GPU reset
- DC HDCP support
- BACO support for CI/VI asics
- MSI-X support
- Arcturus EEPROM support
- Arcturus VCN encode support
- VCN dynamic powergating on RV/RV2
amdkfd:
- add navi12/14/renoir support to kfd
radeon:
- SI dpm fix ported from amdgpu
- fix bad DMA on ppc platforms
gma500:
- memory leak fixes
qxl:
- convert to new gem mmap
exynos:
- build warning fix
komeda:
- add aclk sysfs attribute
v3d:
- userspace cleanup uapi change
i810:
- fix for underflow in dispatch ioctls
ast:
- refactor show_cursor
mgag200:
- refactor show_cursor
arcgpu:
- encoder finding improvements
mediatek:
- mipi_tx, dsi and partial crtc support for MT8183 SoC
- rotation support
meson:
- add suspend/resume support
omap:
- misc refactors
tegra:
- DisplayPort support for Tegra 210, 186 and 194.
- IOMMU-backed DMA API fixes
panfrost:
- fix lockdep issue
- simplify devfreq integration
rcar-du:
- R8A774B1 SoC support
- fixes for H2 ES2.0
sun4i:
- vcc-dsi regulator support
virtio-gpu:
- vmexit vs spinlock fix
- move to gem shmem helpers
- handle large command buffers with cma"
* tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm: (1855 commits)
drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10
drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub
drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF.
drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VF
drm/amdgpu/gfx10: re-init clear state buffer after gpu reset
merge fix for "ftrace: Rework event_create_dir()"
drm/amdgpu: Update Arcturus golden registers
drm/amdgpu/gfx10: fix out-of-bound mqd_backup array access
drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt
Revert "drm/amd/display: enable S/G for RAVEN chip"
drm/amdgpu: disable gfxoff on original raven
drm/amdgpu: remove experimental flag for Navi14
drm/amdgpu: disable gfxoff when using register read interface
drm/amdgpu/powerplay: properly set PP_GFXOFF_MASK (v2)
drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2
drm/radeon: fix bad DMA from INTERRUPT_CNTL2
drm/amd/display: Fix debugfs on MST connectors
drm/amdgpu/nv: add asic func for fetching vbios from rom directly
drm/amdgpu: put flush_delayed_work at first
drm/amdgpu/vcn2.5: fix the enc loop with hw fini
...
The design of our interrupt handlers is that we ack the receipt of the
interrupt first, inside the critical section where the master interrupt
control is off and other cpus cannot start processing the next
interrupt; and then process the interrupt events afterwards. However,
Icelake introduced a whole new set of banked GT_IIR that are inherently
serialised and slow to retrieve the IIR and must be processed within the
critical section. We can still push our breadcrumbs out of this critical
section by using our irq_worker. On bdw+, this should not make too much
of a difference as we only slightly defer the breadcrumbs, but on icl+
this should make a big difference to our throughput of interrupts from
concurrently executing engines.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127115813.3345823-1-chris@chris-wilson.co.uk
The expected downside to commit 58b4c1a07a ("drm/i915: Reduce nested
prepare_remote_context() to a trylock") was that it would need to return
-EAGAIN to userspace in order to resolve potential mutex inversion. Such
an unsightly round trip is unnecessary if we could atomically insert a
barrier into the i915_active_fence, so make it happen.
Currently, we use the timeline->mutex (or some other named outer lock)
to order insertion into the i915_active_fence (and so individual nodes
of i915_active). Inside __i915_active_fence_set, we only need then
serialise with the interrupt handler in order to claim the timeline for
ourselves.
However, if we remove the outer lock, we need to ensure the order is
intact between not only multiple threads trying to insert themselves
into the timeline, but also with the interrupt handler completing the
previous occupant. We use xchg() on insert so that we have an ordered
sequence of insertions (and each caller knows the previous fence on
which to wait, preserving the chain of all fences in the timeline), but
we then have to cmpxchg() in the interrupt handler to avoid overwriting
the new occupant. The only nasty side-effect is having to temporarily
strip off the RCU-annotations to apply the atomic operations, otherwise
the rules are much more conventional!
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112402
Fixes: 58b4c1a07a ("drm/i915: Reduce nested prepare_remote_context() to a trylock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127134527.3438410-1-chris@chris-wilson.co.uk
Now that we rapidly park the GT when the GPU idles, we often find
ourselves idling faster than the RC6 promotion timer. Thus if we tell
the GPU to enter RC6 manually as we park, we can do so quicker (by
around 50ms, half an EI on average) and marginally increase our
powersaving across all execlists platforms.
v2: Now with a selftest to check we can enter RC6 manually
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127095657.3209854-1-chris@chris-wilson.co.uk
On context retiring, we may invoke the kernel_context to unpin this
context. Elsewhere, we may use the kernel_context to modify this
context. This currently leads to an AB-BA lock inversion, so we need to
back-off from the contended lock, and repeat.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111732
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: a9877da2d6 ("drm/i915/oa: Reconfigure contexts on the fly")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191126065521.2331017-1-chris@chris-wilson.co.uk
(cherry picked from commit 58b4c1a07a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- A comprehensive rewrite of the robust/PI futex code's exit handling
to fix various exit races. (Thomas Gleixner et al)
- Rework the generic REFCOUNT_FULL implementation using
atomic_fetch_* operations so that the performance impact of the
cmpxchg() loops is mitigated for common refcount operations.
With these performance improvements the generic implementation of
refcount_t should be good enough for everybody - and this got
confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and
REFCOUNT_FULL entirely, leaving the generic implementation enabled
unconditionally. (Will Deacon)
- Other misc changes, fixes, cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
lkdtm: Remove references to CONFIG_REFCOUNT_FULL
locking/refcount: Remove unused 'refcount_error_report()' function
locking/refcount: Consolidate implementations of refcount_t
locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
locking/refcount: Move saturation warnings out of line
locking/refcount: Improve performance of generic REFCOUNT_FULL code
locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
locking/refcount: Remove unused refcount_*_checked() variants
locking/refcount: Ensure integer operands are treated as signed
locking/refcount: Define constants for saturation and max refcount values
futex: Prevent exit livelock
futex: Provide distinct return value when owner is exiting
futex: Add mutex around futex exit
futex: Provide state handling for exec() as well
futex: Sanitize exit state handling
futex: Mark the begin of futex exit explicitly
futex: Set task::futex_state to DEAD right after handling futex exit
futex: Split futex_mm_release() for exit/exec
exit/exec: Seperate mm_release()
futex: Replace PF_EXITPIDONE with a state
...
In order to avoid some nasty mutex inversions, commit 09c5ab384f
("drm/i915: Keep rings pinned while the context is active") allowed the
intel_ring unpinning to be run concurrently with the next context
pinning it. Thus each step in intel_ring_unpin() needed to be atomic and
ordered in a nice onion with intel_ring_pin() so that the lifetimes
overlapped and were always safe.
Sadly, a few steps in intel_ring_unpin() were overlooked, such as
closing the read/write pointers of the ring and discarding the
intel_ring.vaddr, as these steps were not serialised with
intel_ring_pin() and so could leave the ring in disarray.
Fixes: 09c5ab384f ("drm/i915: Keep rings pinned while the context is active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118230254.2615942-6-chris@chris-wilson.co.uk
(cherry picked from commit a266bf4200)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The major drawback of commit 7e34f4e4aa ("drm/i915/gen8+: Add RC6 CTX
corruption WA") is that it disables RC6 while Skylake (and friends) is
active, and we do not consider the GPU idle until all outstanding
requests have been retired and the engine switched over to the kernel
context. If userspace is idle, this task falls onto our background idle
worker, which only runs roughly once a second, meaning that userspace has
to have been idle for a couple of seconds before we enable RC6 again.
Naturally, this causes us to consume considerably more energy than
before as powersaving is effectively disabled while a display server
(here's looking at you Xorg) is running.
As execlists will get a completion event as each context is completed,
we can use this interrupt to queue a retire worker bound to this engine
to cleanup idle timelines. We will then immediately notice the idle
engine (without userspace intervention or the aid of the background
retire worker) and start parking the GPU. Thus during light workloads,
we will do much more work to idle the GPU faster... Hopefully with
commensurate power saving!
v2: Watch context completions and only look at those local to the engine
when retiring to reduce the amount of excess work we perform.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112315
References: 7e34f4e4aa ("drm/i915/gen8+: Add RC6 CTX corruption WA")
References: 2248a28384 ("drm/i915/gen8+: Add RC6 CTX corruption WA")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-3-chris@chris-wilson.co.uk
(cherry picked from commit 4f88f8747f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In the next patch, we will introduce a new asynchronous retirement
worker, fed by execlists CS events. Here we may queue a retirement as
soon as a request is submitted to HW (and completes instantly), and we
also want to process that retirement as early as possible and cannot
afford to postpone (as there may not be another opportunity to retire it
for a few seconds). To allow the new async retirer to run in parallel
with our submission, pull the __i915_request_queue (that passes the
request to HW) inside the timelines spinlock so that the retirement
cannot release the timeline before we have completed the submission.
v2: Actually to play nicely with engine_retire, we have to raise the
timeline.active_lock before releasing the HW. intel_gt_retire_requsts()
is still serialised by the outer lock so they cannot see this
intermediate state, and engine_retire is serialised by HW submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-2-chris@chris-wilson.co.uk
(cherry picked from commit 88a4655e75)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
I rushed a last minute correction to cancel_port_requests() to prevent
the snooping of *execlists->active as the inflight array was being
updated, without noticing we iterated the inflight array starting from
active! Oops.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112387
Fixes: 97f9af78f3 ("drm/i915/gt: Mark the execlists->active as the primary volatile access")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125112520.1760492-1-chris@chris-wilson.co.uk
(cherry picked from commit da0ef77e1e)
[Joonas: Fixed Fixes: tag to match drm-intel-next-fixes]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since we want to do a lockless read of the current active request, and
that request is written to by process_csb also without serialisation, we
need to instruct gcc to take care in reading the pointer itself.
Otherwise, we have observed execlists_active() to report 0x40.
[ 2400.760381] igt/para-4098 1..s. 2376479300us : process_csb: rcs0 cs-irq head=3, tail=4
[ 2400.760826] igt/para-4098 1..s. 2376479303us : process_csb: rcs0 csb[4]: status=0x00000001:0x00000000
[ 2400.761271] igt/para-4098 1..s. 2376479306us : trace_ports: rcs0: promote { b9c59:2622, b9c55:2624 }
[ 2400.761726] igt/para-4097 0d... 2376479311us : __i915_schedule: rcs0: -2147483648->3, inflight:0000000000000040, rq:ffff888208c1e940
which is impossible!
The answer is that as we keep the existing execlists->active pointing
into the array as we copy over that array, the unserialised read may see
a partial pointer value.
Fixes: df40306902 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125094318.1630806-1-chris@chris-wilson.co.uk
(cherry picked from commit 331bf90591)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In commit a79ca656b6 ("drm/i915: Push the wakeref->count deferral to
the backend"), I erroneously concluded that we last modify the engine
inside __i915_request_commit() meaning that we could enable concurrent
submission for userspace as we enqueued this request. However, this
falls into a trap with other users of the engine->kernel_context waking
up and submitting their request before the idle-switch is queued, with
the result that the kernel_context is executed out-of-sequence most
likely upsetting the GPU and certainly ourselves when we try to retire
the out-of-sequence requests.
As such we need to hold onto the effective engine->kernel_context mutex
lock (via the engine pm mutex proxy) until we have finish queuing the
request to the engine.
v2: Serialise against concurrent intel_gt_retire_requests()
v3: Describe the hairy locking scheme with intel_gt_retire_requests()
for future reference.
v4: Combine timeline->lock and engine pm release; it's hairy.
Fixes: a79ca656b6 ("drm/i915: Push the wakeref->count deferral to the backend")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120165514.3955081-2-chris@chris-wilson.co.uk
(cherry picked from commit 5cba288466)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The general concept was that intel_timeline.active_count was locked by
the intel_timeline.mutex. The exception was for power management, where
the engine->kernel_context->timeline could be manipulated under the
global wakeref.mutex.
This was quite solid, as we always manipulated the timeline only while
we held an engine wakeref.
And then we started retiring requests outside of struct_mutex, only
using the timelines.active_list and the timeline->mutex. There we
started manipulating intel_timeline.active_count outside of an engine
wakeref, and so introduced a race between __engine_park() and
intel_gt_retire_requests(), a race that could result in the
engine->kernel_context not being added to the active timelines and so
losing requests, which caused us to keep the system permanently powered
up [and unloadable].
The race would be easy to close if we could take the engine wakeref for
the timeline before we retire -- except timelines are not bound to any
engine and so we would need to keep all active engines awake. The
alternative is to guard intel_timeline_enter/intel_timeline_exit for use
outside of the timeline->mutex.
Fixes: e5dadff4b0 ("drm/i915: Protect request retirement with timeline->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120165514.3955081-1-chris@chris-wilson.co.uk
(cherry picked from commit a6edbca74b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Previously, we assumed we could use mutex_trylock() within an atomic
context, falling back to a worker if contended. However, such trickery
is illegal inside interrupt context, and so we need to always use a
worker under such circumstances. As we normally are in process context,
we can typically use a plain mutex, and only defer to a work when we
know we are being called from an interrupt path.
Fixes: 51fbd8de87 ("drm/i915/pmu: Atomically acquire the gt_pm wakeref")
References: a0855d24fc ("locking/mutex: Complain upon mutex API misuse in IRQ contexts")
References: https://bugs.freedesktop.org/show_bug.cgi?id=111626
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120125433.3767149-1-chris@chris-wilson.co.uk
(cherry picked from commit 07779a76ee)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
pm_suspend_target_state is declared under CONFIG_PM_SLEEP but only
defined under CONFIG_SUSPEND. Play safe and only use the symbol if it is
both declared and defined.
Reported-by: kbuild-all@lists.01.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: a70a9e998e ("drm/i915: Defer rc6 shutdown to suspend_late")
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120182209.3967833-1-chris@chris-wilson.co.uk
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The major drawback of commit 7e34f4e4aa ("drm/i915/gen8+: Add RC6 CTX
corruption WA") is that it disables RC6 while Skylake (and friends) is
active, and we do not consider the GPU idle until all outstanding
requests have been retired and the engine switched over to the kernel
context. If userspace is idle, this task falls onto our background idle
worker, which only runs roughly once a second, meaning that userspace has
to have been idle for a couple of seconds before we enable RC6 again.
Naturally, this causes us to consume considerably more energy than
before as powersaving is effectively disabled while a display server
(here's looking at you Xorg) is running.
As execlists will get a completion event as each context is completed,
we can use this interrupt to queue a retire worker bound to this engine
to cleanup idle timelines. We will then immediately notice the idle
engine (without userspace intervention or the aid of the background
retire worker) and start parking the GPU. Thus during light workloads,
we will do much more work to idle the GPU faster... Hopefully with
commensurate power saving!
v2: Watch context completions and only look at those local to the engine
when retiring to reduce the amount of excess work we perform.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112315
References: 7e34f4e4aa ("drm/i915/gen8+: Add RC6 CTX corruption WA")
References: 2248a28384 ("drm/i915/gen8+: Add RC6 CTX corruption WA")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-3-chris@chris-wilson.co.uk
In the next patch, we will introduce a new asynchronous retirement
worker, fed by execlists CS events. Here we may queue a retirement as
soon as a request is submitted to HW (and completes instantly), and we
also want to process that retirement as early as possible and cannot
afford to postpone (as there may not be another opportunity to retire it
for a few seconds). To allow the new async retirer to run in parallel
with our submission, pull the __i915_request_queue (that passes the
request to HW) inside the timelines spinlock so that the retirement
cannot release the timeline before we have completed the submission.
v2: Actually to play nicely with engine_retire, we have to raise the
timeline.active_lock before releasing the HW. intel_gt_retire_requsts()
is still serialised by the outer lock so they cannot see this
intermediate state, and engine_retire is serialised by HW submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-2-chris@chris-wilson.co.uk
As the engine->kernel_context is used within the engine-pm barrier, we
have to be careful when emitting requests outside of the barrier, as the
strict timeline locking rules do not apply. Instead, we must ensure the
engine_park() cannot be entered as we build the request, which is
simplest by taking an explicit engine-pm wakeref around the request
construction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-1-chris@chris-wilson.co.uk
I rushed a last minute correction to cancel_port_requests() to prevent
the snooping of *execlists->active as the inflight array was being
updated, without noticing we iterated the inflight array starting from
active! Oops.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112387
Fixes: 331bf90591 ("drm/i915/gt: Mark the execlists->active as the primary volatile access")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125112520.1760492-1-chris@chris-wilson.co.uk
Since we want to do a lockless read of the current active request, and
that request is written to by process_csb also without serialisation, we
need to instruct gcc to take care in reading the pointer itself.
Otherwise, we have observed execlists_active() to report 0x40.
[ 2400.760381] igt/para-4098 1..s. 2376479300us : process_csb: rcs0 cs-irq head=3, tail=4
[ 2400.760826] igt/para-4098 1..s. 2376479303us : process_csb: rcs0 csb[4]: status=0x00000001:0x00000000
[ 2400.761271] igt/para-4098 1..s. 2376479306us : trace_ports: rcs0: promote { b9c59:2622, b9c55:2624 }
[ 2400.761726] igt/para-4097 0d... 2376479311us : __i915_schedule: rcs0: -2147483648->3, inflight:0000000000000040, rq:ffff888208c1e940
which is impossible!
The answer is that as we keep the existing execlists->active pointing
into the array as we copy over that array, the unserialised read may see
a partial pointer value.
Fixes: df40306902 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125094318.1630806-1-chris@chris-wilson.co.uk
Before checking the current i915_active state for the asynchronous work
we submitted, flush any ongoing callback. This ensures that our sampling
is robust and does not sporadically fail due to bad timing as the work
is running on another cpu.
v2: Drop the fence callback sync, retiring under the lock should be good
enough to synchronize with engine_retire() and the
intel_gt_retire_requests() background worker.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191122132404.690440-1-chris@chris-wilson.co.uk
From inside an active timeline in the execbuf ioctl, we may try to
reclaim some space in the GGTT. We need GGTT space for all objects on
!full-ppgtt platforms, and for context images everywhere. However, to
free up space in the GGTT we may need to remove some pinned objects
(e.g. context images) that require flushing the idle barriers to remove.
For this we use the big hammer of intel_gt_wait_for_idle()
However, commit 7936a22dd4 ("drm/i915/gt: Wait for new requests in
intel_gt_retire_requests()") will continue spinning on the wait if a
timeline is active but lacks requests, as is the case during execbuf
reservation. Spinning forever is quite time consuming, so revert that
commit and start again.
In practice, the effect commit 7936a22dd4 was trying to achieve is
accomplished by commit 1683d24c14 ("drm/i915/gt: Move new timelines
to the end of active_list"), so there is no immediate rush to replace
the looping.
Testcase: igt/gem_exec_reloc/basic-range
Fixes: a46bfdc83f ("drm/i915/gt: Wait for new requests in intel_gt_retire_requests()")
References: 1683d24c14 ("drm/i915/gt: Move new timelines to the end of active_list")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191121071044.97798-1-chris@chris-wilson.co.uk
(cherry picked from commit 689122dcc3)
[Joonas: Corrected Fixes: tag ref to match drm-intel-next-fixes]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Bonded request submission is designed to allow requests to execute in
parallel as laid out by the user. If the master request is already
finished before its bonded pair is submitted, the pair were not destined
to run in parallel and we lose the information about the master engine
to dictate selection of the secondary. If the second request was
required to be run on a particular engine in a virtual set, that should
have been specified, rather than left to the whims of a random
unconnected requests!
In the selftest, I made the mistake of not ensuring the master would
overlap with its bonded pairs, meaning that it could indeed complete
before we submitted the bonds. Those bonds were then free to select any
available engine in their virtual set, and not the one expected by the
test.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191122112152.660743-1-chris@chris-wilson.co.uk
Assume that intel_wakeref_get() may take the mutex, and perform other
sleeping actions in the course of its callbacks and so use might_sleep()
to ensure that all callers abide. Anything that cannot sleep has to use
e.g. intel_wakeref_get_if_active() to guarantee its avoidance of the
non-atomic paths.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191121130528.309474-1-chris@chris-wilson.co.uk
As we wait upon a request, we must be holding a reference to it, and be
wary that i915_request_add() consumes the passed in reference.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191121093326.134774-1-chris@chris-wilson.co.uk
From inside an active timeline in the execbuf ioctl, we may try to
reclaim some space in the GGTT. We need GGTT space for all objects on
!full-ppgtt platforms, and for context images everywhere. However, to
free up space in the GGTT we may need to remove some pinned objects
(e.g. context images) that require flushing the idle barriers to remove.
For this we use the big hammer of intel_gt_wait_for_idle()
However, commit 7936a22dd4 ("drm/i915/gt: Wait for new requests in
intel_gt_retire_requests()") will continue spinning on the wait if a
timeline is active but lacks requests, as is the case during execbuf
reservation. Spinning forever is quite time consuming, so revert that
commit and start again.
In practice, the effect commit 7936a22dd4 was trying to achieve is
accomplished by commit 1683d24c14 ("drm/i915/gt: Move new timelines
to the end of active_list"), so there is no immediate rush to replace
the looping.
Testcase: igt/gem_exec_reloc/basic-range
Fixes: 7936a22dd4 ("drm/i915/gt: Wait for new requests in intel_gt_retire_requests()")
References: 1683d24c14 ("drm/i915/gt: Move new timelines to the end of active_list")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191121071044.97798-1-chris@chris-wilson.co.uk
GuC submission path can be called from an interrupt context
and so should use a worker to avoid holding a mutex.
References: 07779a76ee ("drm/i915: Mark up the calling context for intel_wakeref_put()")
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120211321.88021-1-stuart.summers@intel.com
pm_suspend_target_state is declared under CONFIG_PM_SLEEP but only
defined under CONFIG_SUSPEND. Play safe and only use the symbol if it is
both declared and defined.
Reported-by: kbuild-all@lists.01.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: a70a9e998e ("drm/i915: Defer rc6 shutdown to suspend_late")
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120182209.3967833-1-chris@chris-wilson.co.uk
In commit a79ca656b6 ("drm/i915: Push the wakeref->count deferral to
the backend"), I erroneously concluded that we last modify the engine
inside __i915_request_commit() meaning that we could enable concurrent
submission for userspace as we enqueued this request. However, this
falls into a trap with other users of the engine->kernel_context waking
up and submitting their request before the idle-switch is queued, with
the result that the kernel_context is executed out-of-sequence most
likely upsetting the GPU and certainly ourselves when we try to retire
the out-of-sequence requests.
As such we need to hold onto the effective engine->kernel_context mutex
lock (via the engine pm mutex proxy) until we have finish queuing the
request to the engine.
v2: Serialise against concurrent intel_gt_retire_requests()
v3: Describe the hairy locking scheme with intel_gt_retire_requests()
for future reference.
v4: Combine timeline->lock and engine pm release; it's hairy.
Fixes: a79ca656b6 ("drm/i915: Push the wakeref->count deferral to the backend")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120165514.3955081-2-chris@chris-wilson.co.uk
The general concept was that intel_timeline.active_count was locked by
the intel_timeline.mutex. The exception was for power management, where
the engine->kernel_context->timeline could be manipulated under the
global wakeref.mutex.
This was quite solid, as we always manipulated the timeline only while
we held an engine wakeref.
And then we started retiring requests outside of struct_mutex, only
using the timelines.active_list and the timeline->mutex. There we
started manipulating intel_timeline.active_count outside of an engine
wakeref, and so introduced a race between __engine_park() and
intel_gt_retire_requests(), a race that could result in the
engine->kernel_context not being added to the active timelines and so
losing requests, which caused us to keep the system permanently powered
up [and unloadable].
The race would be easy to close if we could take the engine wakeref for
the timeline before we retire -- except timelines are not bound to any
engine and so we would need to keep all active engines awake. The
alternative is to guard intel_timeline_enter/intel_timeline_exit for use
outside of the timeline->mutex.
Fixes: e5dadff4b0 ("drm/i915: Protect request retirement with timeline->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120165514.3955081-1-chris@chris-wilson.co.uk
Previously, we assumed we could use mutex_trylock() within an atomic
context, falling back to a worker if contended. However, such trickery
is illegal inside interrupt context, and so we need to always use a
worker under such circumstances. As we normally are in process context,
we can typically use a plain mutex, and only defer to a work when we
know we are being called from an interrupt path.
Fixes: 51fbd8de87 ("drm/i915/pmu: Atomically acquire the gt_pm wakeref")
References: a0855d24fc ("locking/mutex: Complain upon mutex API misuse in IRQ contexts")
References: https://bugs.freedesktop.org/show_bug.cgi?id=111626
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120125433.3767149-1-chris@chris-wilson.co.uk
For our current users we don't expect pool objects to be writable from
the gpu.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 4f7af1948a ("drm/i915: Support ro ppgtt mapped cmdparser shadow buffers")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119150154.18249-1-matthew.auld@intel.com
(cherry picked from commit d18580b08b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reading from CTX_INFO upsets rc6, requiring us to detect and prevent
possible rc6 context corruption. Poke at the bear!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Tested-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119154723.3311814-1-chris@chris-wilson.co.uk
As we may park the gt during request retirement, we may cancel the
retirement worker only to then program the delayed worker once more.
If we schedule the next delayed retirement worker first, if we then park
the gt, the work will remain cancelled.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119162559.3313003-2-chris@chris-wilson.co.uk
When adding a new active timeline, place it at the end of the list. This
allows for intel_gt_retire_requests() to pick up the newcomer more
quickly and hopefully complete the retirement sooner. A miniscule
optimisation.
References: 7936a22dd4 ("drm/i915/gt: Wait for new requests in intel_gt_retire_requests()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119162559.3313003-1-chris@chris-wilson.co.uk
For our current users we don't expect pool objects to be writable from
the gpu.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 4f7af1948a ("drm/i915: Support ro ppgtt mapped cmdparser shadow buffers")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119150154.18249-1-matthew.auld@intel.com
In order to avoid some nasty mutex inversions, commit 09c5ab384f
("drm/i915: Keep rings pinned while the context is active") allowed the
intel_ring unpinning to be run concurrently with the next context
pinning it. Thus each step in intel_ring_unpin() needed to be atomic and
ordered in a nice onion with intel_ring_pin() so that the lifetimes
overlapped and were always safe.
Sadly, a few steps in intel_ring_unpin() were overlooked, such as
closing the read/write pointers of the ring and discarding the
intel_ring.vaddr, as these steps were not serialised with
intel_ring_pin() and so could leave the ring in disarray.
Fixes: 09c5ab384f ("drm/i915: Keep rings pinned while the context is active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118230254.2615942-6-chris@chris-wilson.co.uk
Only serialise with the chipset using an mmio if the chipset is
currently active. We expect that any writes into the chipset range will
simply be forgotten until it wakes up.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118184943.2593048-8-chris@chris-wilson.co.uk
On some platforms (e.g. KBL) that do not support GuC submission, but
the user enabled the GuC communication (e.g for HuC authentication)
calling the GuC EXIT_S_STATE action results in lose of ability to
enter RC6. We can remove the GuC suspend/resume entirely as we do
not need to save the GuC submission status.
Add intel_guc_submission_is_enabled() function to determine if
GuC submission is active.
v2: Do not suspend/resume the GuC on platforms that do not support
Guc Submission.
v3: Fix typo, move suspend logic to remove goto.
v4: Use intel_guc_submission_is_enabled() to check GuC submission
status.
v5: No need to look at engine to determine if submission is enabled.
Squash fix + intel_guc_submission_is_enabled() patch into one.
v6: Move resume check into intel_guc_resume() for symmetry.
Fix commit Fixes tag.
Reported-by: KiteStramuort <kitestramuort@autistici.org>
Reported-by: S. Zharkoff <s.zharkoff@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623
Fixes: ffd5ce22fa ("drm/i915/guc: Updates for GuC 32.0.3 firmware")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Tomas Janousek <tomi@nomi.cz>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115231538.1249-1-don.hiatt@intel.com
(cherry picked from commit 82e0c5bbd6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Our callers fall into two categories, those passing timeout=0 who just
want to flush request retirements and those passing a timeout that need
to wait for submission completion (e.g. intel_gt_wait_for_idle()).
Currently, we only wait for a snapshot of timelines at the start of the
wait (but there was an expectation that new requests would cause timelines
to appear at the end). However, our callers, such as
intel_gt_wait_for_idle() before suspend, do require us to wait for the
power management requests emitted by retirement as well. If we don't,
then it takes an extra second or two for the background worker to flush
the queue and mark the GT as idle.
Fixes: 7e80576266 ("drm/i915: Drop struct_mutex from around i915_retire_requests()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114225736.616885-1-chris@chris-wilson.co.uk
(cherry picked from commit 7936a22dd4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The workaround to disable coarse power gating is still needed on SKL
GT3/GT4 machines and since the RC6 context corruption was discovered by
the hardware team also on all GEN9 machines. Restore applying the
workaround.
Fixes: c113236718 ("drm/i915: Extract GT render sleep (rc6) management")
Testcase: igt/intel_gt_pm_late_selftests/live_rc6_ctx
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114152621.7235-1-imre.deak@intel.com
(cherry picked from commit 980f87a2ed)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
On some platforms (e.g. KBL) that do not support GuC submission, but
the user enabled the GuC communication (e.g for HuC authentication)
calling the GuC EXIT_S_STATE action results in lose of ability to
enter RC6. We can remove the GuC suspend/resume entirely as we do
not need to save the GuC submission status.
Add intel_guc_submission_is_enabled() function to determine if
GuC submission is active.
v2: Do not suspend/resume the GuC on platforms that do not support
Guc Submission.
v3: Fix typo, move suspend logic to remove goto.
v4: Use intel_guc_submission_is_enabled() to check GuC submission
status.
v5: No need to look at engine to determine if submission is enabled.
Squash fix + intel_guc_submission_is_enabled() patch into one.
v6: Move resume check into intel_guc_resume() for symmetry.
Fix commit Fixes tag.
Reported-by: KiteStramuort <kitestramuort@autistici.org>
Reported-by: S. Zharkoff <s.zharkoff@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623
Fixes: ffd5ce22fa ("drm/i915/guc: Updates for GuC 32.0.3 firmware")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Tomas Janousek <tomi@nomi.cz>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115231538.1249-1-don.hiatt@intel.com
When telling the user that device power management is disabled, it is
helpful to say which device that was.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115122343.821331-1-chris@chris-wilson.co.uk
As the heartbeat has the effect of flushing context barriers, this
interferes with the context barrier tests that are trying to observe
them directly. Disable the heartbeat so that the barriers are as
predictable as the test demands.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115150841.880349-2-chris@chris-wilson.co.uk
i915:
- MOCS table fixes for EHL and TGL
- Update Display's rawclock on resume
- GVT's dmabuf reference drop fix
amdgpu:
- Fix a potential crash in firmware parsing
sun4i:
- One fix to the dotclock dividers range for sun4i
-----BEGIN PGP SIGNATURE-----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=RKpL
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-11-15' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Here is this weeks non-intel hw vuln fixes pull. Three drivers, all
small fixes.
i915:
- MOCS table fixes for EHL and TGL
- Update Display's rawclock on resume
- GVT's dmabuf reference drop fix
amdgpu:
- Fix a potential crash in firmware parsing
sun4i:
- One fix to the dotclock dividers range for sun4i"
* tag 'drm-fixes-2019-11-15' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: fix null pointer deref in firmware header printing
drm/i915/tgl: MOCS table update
Revert "drm/i915/ehl: Update MOCS table for EHL"
drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.
drm/i915: update rawclk also on resume
drm/i915/gvt: fix dropping obj reference twice
Verify that we can execute a long chain of dependent requests from
userspace, each one slightly more important than the last.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114225736.616885-4-chris@chris-wilson.co.uk
RC6 is tracked underneath the intel_gt, so use our local pointers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115114800.725061-1-chris@chris-wilson.co.uk
Our callers fall into two categories, those passing timeout=0 who just
want to flush request retirements and those passing a timeout that need
to wait for submission completion (e.g. intel_gt_wait_for_idle()).
Currently, we only wait for a snapshot of timelines at the start of the
wait (but there was an expectation that new requests would cause timelines
to appear at the end). However, our callers, such as
intel_gt_wait_for_idle() before suspend, do require us to wait for the
power management requests emitted by retirement as well. If we don't,
then it takes an extra second or two for the background worker to flush
the queue and mark the GT as idle.
Fixes: 7e80576266 ("drm/i915: Drop struct_mutex from around i915_retire_requests()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114225736.616885-1-chris@chris-wilson.co.uk
Backmerge to get dfce90259d ("Backmerge i915 security patches from
commit 'ea0b163b13ff' into drm-next") and thus 100d46bd72 ("Merge
Intel Gen8/Gen9 graphics fixes from Jon Bloomfield.").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- PMU "Frequency" is reported as accumulated cycles
- Avoid OOPS in dumb_create IOCTL when no CRTCs
- Mitigation for userptr put_pages deadlock with trylock_page
- Fix to avoid freeing heartbeat request too early
- Fix LRC coherency issue
- Fix Bugzilla #112212: Avoid screen corruption on MST
- Error path fix to unlock context on failed context VM SETPARAM
- Always consider holding preemption a privileged op in perf/OA
- Preload LUTs if the hw isn't currently using them to avoid color flash on VLV/CHV
- Protect context while grabbing its name for the request
- Don't resize aliasing ppGTT size
- Smaller fixes picked by tooling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114085213.GA6440@jlahtine-desk.ger.corp.intel.com
With the new interrupt re-partitioning in Gen11, GuC controls by itself
the interrupts it receives, so steering bits and registers have been
defeatured. Being this the case, when the GuC is in control of
submissions we won't know what to do with the ctx switch interrupt
in the driver, so disable it.
v2 (Daniele): replace the gen9 paths instead of keeping gen9 and gen11
functions since we won't support guc submission on any pre-gen11 platform.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191105225321.26642-1-daniele.ceraolospurio@intel.com
The workaround to disable coarse power gating is still needed on SKL
GT3/GT4 machines and since the RC6 context corruption was discovered by
the hardware team also on all GEN9 machines. Restore applying the
workaround.
Fixes: c113236718 ("drm/i915: Extract GT render sleep (rc6) management")
Testcase: igt/intel_gt_pm_late_selftests/live_rc6_ctx
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114152621.7235-1-imre.deak@intel.com
Probe the mocs registers for new contexts and across GPU resets. Similar
to intel_workarounds, we have tables of what register values we expect
to see, so verify that user contexts are affected by them. In the
future, we should add tests similar to intel_sseu to cover dynamic
reconfigurations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112223600.30993-4-chris@chris-wilson.co.uk
We repeatedly (and more so in future) use the same looping construct
over the mocs definition table to setup the register state. Refactor the
loop construct into a reusable macro.
add/remove: 2/1 grow/shrink: 1/2 up/down: 113/-330 (-217)
Function old new delta
intel_mocs_init_engine.cold - 71 +71
offset - 28 +28
__func__ 17273 17287 +14
intel_mocs_init 143 113 -30
mocs_register.isra 91 - -91
intel_mocs_init_engine 503 294 -209
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112223600.30993-3-chris@chris-wilson.co.uk
Be consistent in our mocs setup on Tigerlake and set the unused control
value to follow the PTE entry as we previously have done. The unused
values are beyond the defines of the ABI, the consistency simplifies our
checking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112223600.30993-1-chris@chris-wilson.co.uk
This backmerges the branch that ended up in Linus' tree. It removes
all the changes for the rc6 patches from Linus' tree in favour of
a patch that is based on a large refactor that occured.
Otherwise it all looks good.
Signed-off-by: Dave Airlie <airlied@redhat.com>
In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.
v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
change.
v5:
- Rebased on latest upstream gt_pm refactoring.
v6:
- s/i915_rc6_/intel_rc6_/
- Don't return a value from i915_rc6_ctx_wa_check().
v7:
- Rebased on latest gt rc6 refactoring.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
[airlied: pull this later version of this patch into drm-next
to make resolving the conflict mess easier.]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Extend disabling SAMPLER_STATE prefetch workaround to gen12.
v2: Limit the WA to TGL A0 and update the WA no(Chris)
BSpec: 52890
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113231953.24853-1-radhakrishna.sripada@intel.com
The bspec was just updated with a minor correction to entry 61 (it
shouldn't have had the SCF bit set).
v2:
- Add a MOCS_ENTRY_UNUSED() and use it to declare the
explicitly-reserved MOCS entries. (Lucas)
- Move the warning suppression from the Makefile to a #pragma that only
affects the TGL table. (Lucas)
v3:
- Entries 16 and 17 are identical to ICL now, so no need to explicitly
adjust them (or mess with compiler warning overrides).
Bspec: 45101
Fixes: 2ddf992179 ("drm/i915/tgl: Define MOCS entries for Tigerlake")
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-2-matthew.d.roper@intel.com
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
(cherry picked from commit bfb0e8e63d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts commit f4071997f1.
These extra EHL entries won't behave as expected without a bit more work
on the kernel side so let's drop them until that kernel work has had a
chance to land. Userspace trying to use these new entries won't get the
advantage of the new functionality these entries are meant to provide,
but at least it won't misbehave.
When we do add these back in the future, we'll probably want to
explicitly use separate tables for ICL and EHL so that userspace
software that mistakenly uses these entries (which are undefined on ICL)
sees the same behavior it sees with all the other undefined entries.
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v5.3+
Fixes: f4071997f1 ("drm/i915/ehl: Update MOCS table for EHL")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-1-matthew.d.roper@intel.com
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit 046091758b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Still the saga of the hsw live_blt incoherency continues. While it did
seem that the invalidate before the breadcrumb had improved the mtbf,
nevertheless live_blt still failed. Mika's next idea was to pull the
invalidate-stall into the breadcrumb write itself.
References: 860afa0868 ("drm/i915/gt: Flush gen7 even harder")
References: https://bugs.freedesktop.org/show_bug.cgi?id=112147
Testcase: igt/i915_selftest/live_blt
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113151956.32242-1-chris@chris-wilson.co.uk
The bspec was just updated with a minor correction to entry 61 (it
shouldn't have had the SCF bit set).
v2:
- Add a MOCS_ENTRY_UNUSED() and use it to declare the
explicitly-reserved MOCS entries. (Lucas)
- Move the warning suppression from the Makefile to a #pragma that only
affects the TGL table. (Lucas)
v3:
- Entries 16 and 17 are identical to ICL now, so no need to explicitly
adjust them (or mess with compiler warning overrides).
Bspec: 45101
Fixes: 2ddf992179 ("drm/i915/tgl: Define MOCS entries for Tigerlake")
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-2-matthew.d.roper@intel.com
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
This reverts commit f4071997f1.
These extra EHL entries won't behave as expected without a bit more work
on the kernel side so let's drop them until that kernel work has had a
chance to land. Userspace trying to use these new entries won't get the
advantage of the new functionality these entries are meant to provide,
but at least it won't misbehave.
When we do add these back in the future, we'll probably want to
explicitly use separate tables for ICL and EHL so that userspace
software that mistakenly uses these entries (which are undefined on ICL)
sees the same behavior it sees with all the other undefined entries.
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v5.3+
Fixes: f4071997f1 ("drm/i915/ehl: Update MOCS table for EHL")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-1-matthew.d.roper@intel.com
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
The gem_ctx_persistence/smoketest was detecting an odd coherency issue
inside the LRC context image; that the address of the ring buffer did
not match our associated struct intel_ring. As we set the address into
the context image when we pin the ring buffer into place before the
context is active, that leaves the question of where did it get
overwritten. Either the HW context save occurred after our pin which
would imply that our idle barriers are broken, or we overwrote the
context image ourselves. It is only in reset_active() where we dabble
inside the context image outside of a serialised path from schedule-out;
but we could equally perform the operation inside schedule-in which is
then fully serialised with the context pin -- and remains serialised by
the engine pulse with kill_context(). (The only downside, aside from
doing more work inside the engine->active.lock, was the plan to merge
all the reset paths into doing their context scrubbing on schedule-out
needs more thought.)
Fixes: d12acee84f ("drm/i915/execlists: Cancel banned contexts on schedule-out")
Testcase: igt/gem_ctx_persistence/smoketest
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-3-chris@chris-wilson.co.uk
(cherry picked from commit 31b61f0ef9)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
live_blt is still failing on hsw, showing the hallmark of incoherency.
Since we are fairly certain that the interrupt is after the seqno is
visible, the other possibility is that the seqno is before the writes to
memory are flushed. Throw in an TLB invalidate before the breadcrumb as
we are reasonably confident that forces a CS stall.
References: f9228f7658 ("drm/i915/gt: Try an extra flush on the Haswell blitter")
References: https://bugs.freedesktop.org/show_bug.cgi?id=112147
Testcase: igt/i915_selftest/live_blt
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112160941.23969-1-chris@chris-wilson.co.uk
On gen7, including Haswell, the MI_FLUSH_DW command is not synchronous
with the command streamer nor is there an option to make it so. To hide
this we add a large delay on the CS so that the breadcrumb should always
be visible before the interrupt. However, that does not seem to be
enough to ensure the memory is actually coherent with the read of the
breadcrumb. The breadcrumb update is a post-sync op... Throw in a
preliminary MI_FLUSH_DW before the breadcrumb update in the hope that
helps.
References: https://bugs.freedesktop.org/show_bug.cgi?id=112147
Testcase: igt/i915_selftest/live_blt
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111120957.17732-1-chris@chris-wilson.co.uk
Inside print_request(), we query the context/timeline name. Nothing
immediately protects the context from being freed if the request is
complete -- we rely on serialisation by the caller to keep the name
valid until they finish using it. Inside intel_engine_dump(), we
generally only print the requests in the execution queue protected by the
engine->active.lock, but we also show the pending execlists ports which
are not protected and so require a rcu_read_lock to keep the pointer
valid.
[ 1695.700883] BUG: KASAN: use-after-free in i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.700981] Read of size 8 at addr ffff8887344f4d50 by task gem_ctx_persist/2968
[ 1695.701068]
[ 1695.701156] CPU: 1 PID: 2968 Comm: gem_ctx_persist Tainted: G U 5.4.0-rc6+ #331
[ 1695.701246] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[ 1695.701334] Call Trace:
[ 1695.701424] dump_stack+0x5b/0x90
[ 1695.701870] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.701964] print_address_description.constprop.7+0x36/0x50
[ 1695.702408] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702856] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702947] __kasan_report.cold.10+0x1a/0x3a
[ 1695.703390] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.703836] i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.704241] print_request+0x82/0x2e0 [i915]
[ 1695.704638] ? fwtable_read32+0x133/0x360 [i915]
[ 1695.705042] ? write_timestamp+0x110/0x110 [i915]
[ 1695.705133] ? _raw_spin_lock_irqsave+0x79/0xc0
[ 1695.705221] ? refcount_inc_not_zero_checked+0x91/0x110
[ 1695.705306] ? refcount_dec_and_mutex_lock+0x50/0x50
[ 1695.705709] ? intel_engine_find_active_request+0x202/0x230 [i915]
[ 1695.706115] intel_engine_dump+0x2c9/0x900 [i915]
Fixes: c36eebd9ba ("drm/i915/gt: execlists->active is serialised by the tasklet")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-1-chris@chris-wilson.co.uk
(cherry picked from commit fecffa4668)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Some basic information that is useful to know, such as how many cycles
is a MI_NOOP.
v2: Keep volatile pages pinned at all times! (Matthew)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Anna Karas <anna.karas@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111172716.23733-1-chris@chris-wilson.co.uk
The gem_ctx_persistence/smoketest was detecting an odd coherency issue
inside the LRC context image; that the address of the ring buffer did
not match our associated struct intel_ring. As we set the address into
the context image when we pin the ring buffer into place before the
context is active, that leaves the question of where did it get
overwritten. Either the HW context save occurred after our pin which
would imply that our idle barriers are broken, or we overwrote the
context image ourselves. It is only in reset_active() where we dabble
inside the context image outside of a serialised path from schedule-out;
but we could equally perform the operation inside schedule-in which is
then fully serialised with the context pin -- and remains serialised by
the engine pulse with kill_context(). (The only downside, aside from
doing more work inside the engine->active.lock, was the plan to merge
all the reset paths into doing their context scrubbing on schedule-out
needs more thought.)
Fixes: d12acee84f ("drm/i915/execlists: Cancel banned contexts on schedule-out")
Testcase: igt/gem_ctx_persistence/smoketest
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-3-chris@chris-wilson.co.uk
Having been forced to reduce Braswell back to using the aliasing ppgtt,
the coherency issue we previously observed cannot impact us. Reduce the
performance penalty imposed on all platforms from using the mfence to a
mere sfence.
References: cf66b8a0ba ("drm/i915/execlists: Apply a full mb before execution for Braswell")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191110185806.17413-10-chris@chris-wilson.co.uk
If we detect a hang in a closed context, just flush all of its requests
and cancel any remaining execution along the context. Note that after
closing the context, the last reference to the context may be dropped,
leaving it only valid under RCU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-5-chris@chris-wilson.co.uk
We mention that we are resetting the GPU, and dump the device state for
post mortem debugging. However, while that dump contains the active
processes and the one flagged as causing the error, we do not always
include that information in dmesg. Include the name of the guilty
process in dmesg for reference.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-4-chris@chris-wilson.co.uk
Inside print_request(), we query the context/timeline name. Nothing
immediately protects the context from being freed if the request is
complete -- we rely on serialisation by the caller to keep the name
valid until they finish using it. Inside intel_engine_dump(), we
generally only print the requests in the execution queue protected by the
engine->active.lock, but we also show the pending execlists ports which
are not protected and so require a rcu_read_lock to keep the pointer
valid.
[ 1695.700883] BUG: KASAN: use-after-free in i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.700981] Read of size 8 at addr ffff8887344f4d50 by task gem_ctx_persist/2968
[ 1695.701068]
[ 1695.701156] CPU: 1 PID: 2968 Comm: gem_ctx_persist Tainted: G U 5.4.0-rc6+ #331
[ 1695.701246] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[ 1695.701334] Call Trace:
[ 1695.701424] dump_stack+0x5b/0x90
[ 1695.701870] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.701964] print_address_description.constprop.7+0x36/0x50
[ 1695.702408] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702856] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702947] __kasan_report.cold.10+0x1a/0x3a
[ 1695.703390] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.703836] i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.704241] print_request+0x82/0x2e0 [i915]
[ 1695.704638] ? fwtable_read32+0x133/0x360 [i915]
[ 1695.705042] ? write_timestamp+0x110/0x110 [i915]
[ 1695.705133] ? _raw_spin_lock_irqsave+0x79/0xc0
[ 1695.705221] ? refcount_inc_not_zero_checked+0x91/0x110
[ 1695.705306] ? refcount_dec_and_mutex_lock+0x50/0x50
[ 1695.705709] ? intel_engine_find_active_request+0x202/0x230 [i915]
[ 1695.706115] intel_engine_dump+0x2c9/0x900 [i915]
Fixes: c36eebd9ba ("drm/i915/gt: execlists->active is serialised by the tasklet")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-1-chris@chris-wilson.co.uk
After doing some measuring, Icelake behaves on a par with Broadwell, and
without having to compromise for low power cores with long latencies, we
can reduce the powergating hysteresis so that the powersaving is enabled
faster. No impact observed on client side throughput measures (so
negligible increase in extra switching), and inspection from high
frequency polling using igt/gem_exec_nop/sequential, provided an estimate
for the upper bound before we can measure a substantial impact on
latency.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191110185806.17413-9-chris@chris-wilson.co.uk
Mika spotted that only using cancel_delayed_work() could mean that we
attempted to clear the heartbeat.systole while the worker was still
running. Rectify the situation by only touching the systole from outside
the worker if we suceeded in cancelling the worker before it could run.
The worker is expected to clean up by itself upon idling.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: 058179e72e ("drm/i915/gt: Replace hangcheck by heartbeats")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106133129.17732-1-chris@chris-wilson.co.uk
(cherry picked from commit 841e867286)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since drm provided us with a real struct file we can use for our
anonymous internal clients (mock_file), complete our transition to using
that as the primary interface (and not the mocked up struct drm_file we
previous were using).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107213929.23286-1-chris@chris-wilson.co.uk
The headers in the gem/selftests/, gt/selftests, gvt/, selftests/
directories have never been compile-tested, but it would be possible
to make them self-contained.
This commit only addresses missing <linux/types.h> and forward
struct declarations.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108094142.25942-1-yamada.masahiro@socionext.com
As drm now exports a method to create an anonymous struct file around a
drm_device for internal use, make use of it to avoid our horrible hacks.
Danial suggested that the mock_file_put() wrapper was suitable for
drm-core, along with the mock_drm_getfile() [and that the vestigal
mock_drm_file() in this patch should perhaps be the drm interface
itself]. However, the eventual goal is to remove the mock_drm_file() and
use the struct file and fput() directly, in this patch we take a simple
transition in that direction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-3-chris@chris-wilson.co.uk
Only add the engine to the available set of uabi engines once it has
been fully initialised and we know we want it in the public set.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107081252.10542-17-chris@chris-wilson.co.uk
Before we grab the engine wakeref, tidy up the previous heartbeat
request. If we then abort because the engine powerwell is off, we ensure
the request is freed as we know we will not have freed it when
cancelling the work (as the work is running!).
Fixes: 841e867286 ("drm/i915/gt: Only drop heartbeat.systole if the sole owner")
References: 058179e72e ("drm/i915/gt: Replace hangcheck by heartbeats")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106223410.30334-1-chris@chris-wilson.co.uk
Mika spotted that only using cancel_delayed_work() could mean that we
attempted to clear the heartbeat.systole while the worker was still
running. Rectify the situation by only touching the systole from outside
the worker if we suceeded in cancelling the worker before it could run.
The worker is expected to clean up by itself upon idling.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: 058179e72e ("drm/i915/gt: Replace hangcheck by heartbeats")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106133129.17732-1-chris@chris-wilson.co.uk
In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.
v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
change.
v5: rebased on gem/gt split (Mika)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
The existing cmdparser for gen7 can be bypassed by specifying
batch_len=0 in the execbuf call. This is safe because bypassing
simply reduces the cmd-set available.
In a later patch we will introduce cmdparsing for gen9, as a
security measure, which must be strictly enforced since without
it we are vulnerable to DoS attacks.
Introduce the concept of 'required' cmd parsing that cannot be
bypassed by submitting zero-length bb's.
v2: rebase (Mika)
v2: rebase (Mika)
v3: fix conflict on engine flags (Mika)
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
The counter is removed from the pm wakeref count, but it remains intact
so that we can restore it upon resume. Ergo inside suspend, it may have
a value.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104090158.2959-1-chris@chris-wilson.co.uk
(cherry picked from commit 83c55ee82f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Currently we shutdown rc6 during i915_gem_resume() but this is called
during the preparation phase (i915_drm_prepare) for all suspend paths,
but we only want to shutdown rc6 for S3+. Move the actual shutdown to
i915_gem_suspend_late().
We then need to differentiate between suspend targets, to distinguish S0
(s2idle) where the device is kept awake but needs to be in a low power
mode (the same as runtime suspend) from the device suspend levels where
we lose control of HW and so must disable any HW access to dangling
memory.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111909
Fixes: c113236718 ("drm/i915: Extract GT render sleep (rc6) management")
Testcase: igt/gem_exec_suspend/power-S0
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-4-chris@chris-wilson.co.uk
(cherry picked from commit c601cb2135)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We already track the debugfs user_forcewake on the GT, so it is natural
to pull the suspend/resume handling under gt/ as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-3-chris@chris-wilson.co.uk
(cherry picked from commit 9ab3fe2d7d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Assume all responsibility for operating on the HW to sanitize the GT
state upon load/resume in intel_gt_sanitize() itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-1-chris@chris-wilson.co.uk
(cherry picked from commit 797a615357)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The counter is removed from the pm wakeref count, but it remains intact
so that we can restore it upon resume. Ergo inside suspend, it may have
a value.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104090158.2959-1-chris@chris-wilson.co.uk
Currently we shutdown rc6 during i915_gem_resume() but this is called
during the preparation phase (i915_drm_prepare) for all suspend paths,
but we only want to shutdown rc6 for S3+. Move the actual shutdown to
i915_gem_suspend_late().
We then need to differentiate between suspend targets, to distinguish S0
(s2idle) where the device is kept awake but needs to be in a low power
mode (the same as runtime suspend) from the device suspend levels where
we lose control of HW and so must disable any HW access to dangling
memory.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111909
Fixes: c113236718 ("drm/i915: Extract GT render sleep (rc6) management")
Testcase: igt/gem_exec_suspend/power-S0
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-4-chris@chris-wilson.co.uk
Our timelines are currently contained within an intel_gt, and we only
need to perform list/spinlock initialisation, so we can pull the
intel_timelines_init() into our intel_gt_init_early().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101130406.4142-1-chris@chris-wilson.co.uk
An interesting observation made with our parallel selftests was that on
our small/single cpu systems we would call kthread_stop() before the
kthreads were spawned. If this happens, the kthread is never run at all;
completely bypassing the test.
A simple yield() from the parent will ensure that all children have the
opportunity to start before we reap them.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101084940.31838-1-chris@chris-wilson.co.uk
Recent GuC doesn't require the shared area. We still have one user in
i915 (engine reset via guc) because we haven't updated the command to
match the current guc submission flow [1]. Since the flow in guc is
about to change again, just disable the command for now and add a note
that we'll implement it as part of the new flow.
[1] https://patchwork.freedesktop.org/patch/295038/
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031013040.25803-2-daniele.ceraolospurio@intel.com
Recent GuC binaries (including all the ones we're currently using)
don't require this shared area anymore, having moved the relevant
entries into the stage pool instead. i915 itself doesn't write
anything into it either, so we can safely drop it.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031013040.25803-1-daniele.ceraolospurio@intel.com
When checking the heartbeat pulse, we expect it to have been sent by the
time we have slept. We can verify this by checking the engine serial
number to see if that matches the predicted pulse serial. It will always
be true if, and only if, the pulse was sent by itself (as designed by
the test).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031094259.23028-1-chris@chris-wilson.co.uk
GuC 35.2.0 and HuC 7.0.3 are the first production releases for TGL.
GuC 35.2 for Gen12 is interface-compatible with 33.0 on older Gens,
because the differences are related to additional blocks/commands in
the interface to support new Gen12 features. These parts of the
interface will be added when the relevant features are enabled.
v2: fix typos (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191026003507.21769-1-daniele.ceraolospurio@intel.com
Execlists uses a scheduling quantum (a timeslice) to alternate execution
between ready-to-run contexts of equal priority. This ensures that all
users (though only if they of equal importance) have the opportunity to
run and prevents livelocks where contexts may have implicit ordering due
to userspace semaphores. However, not all workloads necessarily benefit
from timeslicing and in the extreme some sysadmin may want to disable or
reduce the timeslicing granularity.
The timeslicing mechanism can be compiled out^W^W disabled (but should
DCE!) with
./scripts/config --set-val DRM_I915_TIMESLICE_DURATION 0
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029091632.26281-1-chris@chris-wilson.co.uk
Commit 50d84418f5 ("drm/i915: Add i915 to i915_inject_probe_failure")
introduced new functions unfortunately named incompatibly with rules
established by commit f2db53f14d ("drm/i915: Replace "_load" with
"_probe" consequently"). Fix it for consistency.
Suggested-by: Michał Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029102036.6326-2-janusz.krzysztofik@linux.intel.com
The design of the OA unit has been split into several units. We now
have a global unit (OAG) and a render specific unit (OAR). This leads
to some changes on how we program things. Some details :
OAR:
- has its own set of counter registers, they are per-context
saved/restored
- counters are not written to the circular OA buffer
- a snapshot of the counters can be acquired with
MI_RECORD_PERF_COUNT, or a single counter can be read with
MI_STORE_REGISTER_MEM.
OAG:
- has global counters that increment across context switches
- counters are written into the circular OA buffer (if requested)
v2: Fix checkpatch warnings on code style (Lucas)
v3: (Umesh)
- Update register from which tail, status and head are read
- Update logic to sample context reports
- Update whitelist mux and b counter regs
v4: Fix a bug when updating context image for new contexts (Umesh)
v5: Squash patch enabling save/restore of counters into context image
We want this so we can preempt performance queries and keep the
system responsive even when long running queries are ongoing. We
avoid doing it for all contexts.
- use LRI to modify context control (Chris)
- use MASKED_FIELD to program just the masked bits (Chris)
- disable save/restore of counters on cleanup (Chris)
v6: Do not use implicit parameters (Chris)
BSpec: 28727, 30021
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Chris Wilson <chris.p.wilson@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025193746.47155-2-umesh.nerlige.ramappa@intel.com
We may be missing support for the mappable aperture on some platforms.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029095856.25431-7-matthew.auld@intel.com
HWS placement restrictions can't just rely on HAS_LLC flag.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029095856.25431-5-matthew.auld@intel.com
While processing CSB there is no need to look at GuC submission
settings, just check if engine is configured for execlists mode.
While today GuC submission is disabled it's settings are still
based on modparam values that might not correctly reflect actual
submission status in case of any fallback. Until that is fully
fixed, use alternate method to confirm that engine really runs in
execlists mode by comparing set_default_submission vfunc.
v2: add other immediate use of new helper
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028164520.31772-1-michal.wajdeczko@intel.com
drivers/gpu/drm/i915//gt/selftest_engine_heartbeat.c:255 live_heartbeat_fast() error: uninitialized symbol 'err'.
drivers/gpu/drm/i915//gt/selftest_engine_heartbeat.c:320 live_heartbeat_off() error: uninitialized symbol 'err'.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025135943.12524-2-chris@chris-wilson.co.uk
The request's timeline will only contain requests from this context, in
order of execution. Therefore, we can simply look back along this
timeline to find the currently executing request.
If we do find that the current context has completed its last request,
that does not imply that all requests are completed in the context, so
only advance the ring->head up to the end of the known completions!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028124125.25176-1-chris@chris-wilson.co.uk
As we use hard coded offsets for a few locations within the context
image, include those in the selftests to assert that they are valid.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028121803.29408-1-chris@chris-wilson.co.uk
ips uses clock delays as opposed to rps frequency bins. To fit the
delays into the same rps calculations, we need to invert the ips delays.
Fixes: 3e7abf8141 ("drm/i915: Extract GT render power state management")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191026200917.1780-1-chris@chris-wilson.co.uk
Pull the GuC interrupt handlers out of i915_irq.c. They now use the GT
interrupt facilities rather than the central dispatch.
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024211642.7688-2-chris@chris-wilson.co.uk
i915_irq.c is large. One reason for this is that has a large chunk of
the GT render power management stashed away in it. Extract that logic
out of i915_irq.c and intel_pm.c and put it under one roof.
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024211642.7688-1-chris@chris-wilson.co.uk
The location of RING_MI_MODE (used to stop the ring across resets) moved
for Tigerlake. Fixup the new location and include a selftest to verify
the location in the default context image.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191026082220.32632-1-chris@chris-wilson.co.uk
Avoid angering clang and smatch by using a constant value in a '&&' test,
by forcing that constant value into a boolean.
E.g.,
drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c:159:13: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
if (!delay && CONFIG_DRM_I915_PREEMPT_TIMEOUT) {
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025135943.12524-1-chris@chris-wilson.co.uk
On dgfx there's no LLC and eDRAM control table. Since now this
also means the device has global MOCS, just return early on the
initialization function.
L3 settings still apply and still need to be tweaked.
Bspec: 45101
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024195122.22877-3-lucas.demarchi@intel.com
As with commit 3fe0107e45, this change fixes multiple tests that are
using the invocation counts. Documentation doesn't list the workaround
for TGL but applying it fixes the tests.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024103858.28113-2-mika.kuoppala@linux.intel.com
On testing the whitelists, using any of the nonpriv
flags when trying to access the register offset will lead
to failure.
Define address mask to get the mmio offset in order
to guard against any current and future flag usage.
v2: apply also on scrub_whitelisted_registers (Lionel)
Cc: Tapani Pälli <tapani.palli@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024110331.8935-1-mika.kuoppala@linux.intel.com
Make trebly sure that all possible callbacks and their delayed brethren
are complete before asserting that the i915_active should be idle after
flushing all barriers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023235359.27132-1-chris@chris-wilson.co.uk
Replace sampling the engine state every so often with a periodic
heartbeat request to measure the health of an engine. This is coupled
with the forced-preemption to allow long running requests to survive so
long as they do not block other users.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023133108.21401-5-chris@chris-wilson.co.uk
On schedule-out (CS completion) of a banned context, scrub the context
image so that we do not replay the active payload. The intent is that we
skip banned payloads on request submission so that the timeline
advancement continues on in the background. However, if we are returning
to a preempted request, i915_request_skip() is ineffective and instead we
need to patch up the context image so that it continues from the start
of the next request.
v2: Fixup cancellation so that we only scrub the payload of the active
request and do not short-circuit the breadcrumbs (which might cause
other contexts to execute out of order).
v3: Grammar pass
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023133108.21401-3-chris@chris-wilson.co.uk
If the preempted context takes too long to relinquish control, e.g. it
is stuck inside a shader with arbitration disabled, evict that context
with an engine reset. This ensures that preemptions are reasonably
responsive, providing a tighter QoS for the more important context at
the cost of flagging unresponsive contexts more frequently (i.e. instead
of using an ~10s hangcheck, we now evict at ~100ms). The challenge of
lies in picking a timeout that can be reasonably serviced by HW for
typical workloads, balancing the existing clients against the needs for
responsiveness.
Note that coupled with timeslicing, this will lead to rapid GPU "hang"
detection with multiple active contexts vying for GPU time.
The forced preemption mechanism can be compiled out with
./scripts/config --set-val DRM_I915_PREEMPT_TIMEOUT 0
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023133108.21401-2-chris@chris-wilson.co.uk
If we are doing a normal GPU reset triggered after detecting a long
period of stalled work, we can take our time and allow the engines to
quiesce. Since we've stopped submission to the engine, and if we wait
long enough an innocent context should complete, leaving the engine idle.
So by waiting a short amount of time, we should prevent clobbering other
users when resetting a stuck context.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Suggested-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023133108.21401-1-chris@chris-wilson.co.uk
GuC enable logging H2G action definition changed some time ago from 0xE000
to 0x40. All current GuC FW blobs use this definition, so fix the action
definition in driver to match.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022163754.23870-2-robert.m.fosha@intel.com
Creating and opening the GuC log relay file enables and starts
the relay potentially before the caller is ready to consume logs.
Change the behavior so that relay starts only on an explicit call
to the write function (with a value of '1'). Other values flush
the log relay as before.
v2: Style changes and fix typos. Add guc_log_relay_stop()
function. (Daniele)
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022163754.23870-1-robert.m.fosha@intel.com
If retirement is running on another thread, we may inspect the status of
the i915_active before its retirement callback is complete. As we expect
it to be running synchronously, we can wait for any callback to complete
by acquiring the i915_active.mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022112111.9317-1-chris@chris-wilson.co.uk
The actual conditions are that we know the GPU is not accessing the
context, and we hold a pin on the context image to allow CPU access. We
used a fake lock on ce->pin_mutex so that we could try and use lockdep
to assert that access is serialised, but the various different
hardirq/softirq contexts where we need to *fake* holding the pin_mutex
are causing more trouble.
Still it would be nice if we did have a way to reassure ourselves that
the direct update to the context image is serialised with GPU execution.
In the meantime, stop lockdep complaining about false irq inversions.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111923
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022122845.25038-1-chris@chris-wilson.co.uk
With the last user, i915_vma_parked(), retired, there are no more users
of the per-gt pm notifications and we can remove the unused
infrastructure.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021183236.21790-2-chris@chris-wilson.co.uk
Currently even though i915_vma_parked() operates on a per-gt struct, it
is called from a global pm notify. This oddity was only because the long
term plan is to decouple the vma cache from the pm notification, but
right now the oddity stands out like a sore thumb!
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021183236.21790-1-chris@chris-wilson.co.uk
To flush idle barriers, and even inflight requests, we want to send a
preemptive 'pulse' along an engine. We use a no-op request along the
pinned kernel_context at high priority so that it should run or else
kick off the stuck requests. We can use this to ensure idle barriers are
immediately flushed, as part of a context cancellation mechanism, or as
part of a heartbeat mechanism to detect and reset a stuck GPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021174339.5389-1-chris@chris-wilson.co.uk
Although the ring management is much smaller compared to the other GT
power management functions, continue the theme of extracting it out of
the huge intel_pm.c for maintenance.
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191020184139.9145-1-chris@chris-wilson.co.uk
Remember to include the newly created mock engine in the list of
available engines inside the gt.
Fixes: a50134b198 ("drm/i915: Make for_each_engine_masked work on intel_gt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018130703.31125-1-chris@chris-wilson.co.uk
Normally, we try and skip submission if ELSP[1] is filled. However, we
may desire to enable timeslicing due to the queue priority, even if
ELSP[1] itself does not require timeslicing. That is the queue is equal
priority to ELSP[0] and higher priority then ELSP[1]. Previously, we
would wait until the context switch to preempt the current ELSP[1], but
with timeslicing, we want to preempt ELSP[0] and replace it with the
queue.
In writing the test case, it become quickly apparent that we were also
suppressing the tasklet during promotion and so failing to notice when
the queue started requiring timeslicing.
Fixes: 2229adc813 ("drm/i915/execlist: Trim immediate timeslice expiry")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018072027.31948-1-chris@chris-wilson.co.uk
Where the function, or code segment, operates on intel_gt, we need to
start passing it instead of i915 to for_each_engine(_masked).
This is another partial step in migration of i915->engines[] to
gt->engines[].
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017094500.21831-2-tvrtko.ursulin@linux.intel.com
Medium term goal is to eliminate the i915->engine[] array and to get there
we have recently introduced equivalent array in intel_gt. Now we need to
migrate the code further towards this state.
This next step is to eliminate usage of i915->engines[] from the
for_each_engine_masked iterator.
For this to work we also need to use engine->id as index when populating
the gt->engine[] array and adjust the default engine set indexing to use
engine->legacy_idx instead of assuming gt->engines[] indexing.
v2:
* Populate gt->engine[] earlier.
* Check that we don't duplicate engine->legacy_idx
v3:
* Work around the initialization order issue between default_engines()
and intel_engines_driver_register() which sets engine->legacy_idx for
now. It will be fixed properly later.
v4:
* Merge with forgotten v2.5.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017161852.8836-1-tvrtko.ursulin@linux.intel.com
Better explain the usage of the microcontroller and what i915 is
responsible of. While at it, fix the documentation for the auth
function, which doesn't do any pinning anymore.
v2: add a comment on HuC being optional and descrive how HuC accesses
memory (Martin)
v3: add extra newline for better text organization (Martin)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Acked-by: Anna Karas <anna.karas@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014183602.3643-3-daniele.ceraolospurio@intel.com
Add a short description of what we expect from GuC and some minor
improvements to existing documentation. Also remove a comment about a
difference between GuC and HuC that is not true anymore.
v2: add that the GuC is not mandatory (Martin)
v3: add extra newline for better text organization (Martin)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Acked-by: Anna Karas <anna.karas@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014183602.3643-2-daniele.ceraolospurio@intel.com
Now that i915_ggtt knows everything about its own paths to perform mmio,
we can use that as our primary backpointer for individual fence
registers. This reduces the amount of pointer dancing we have to perform
on the common paths, but more importantly finishes our fence register
encapsulation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016143234.4075-1-chris@chris-wilson.co.uk
Now that we record the default "goldenstate" context, we do not need to
emit the mocs registers at the start of each context and can simply do
mmio before the first context and capture the registers as part of its
default image. As a consequence, this means that we repeat the mmio
after each engine reset, fixing up any platform and registers that were
zapped by the reset (for those platforms with global not context-saved
settings).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111723
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111645
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Reviewed-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016090749.7092-1-chris@chris-wilson.co.uk
As preempt-to-busy leaves the request on the HW as the resubmission is
processed, that request may complete in the background and even cause a
second virtual request to enter queue. This second virtual request
breaks our "single request in the virtual pipeline" assumptions.
Furthermore, as the virtual request may be completed and retired, we
lose the reference the virtual engine assumes is held. Normally, just
removing the request from the scheduler queue removes it from the
engine, but the virtual engine keeps track of its singleton request via
its ve->request. This pointer needs protecting with a reference.
v2: Drop unnecessary motion of rq->engine = owner
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-1-chris@chris-wilson.co.uk
(cherry picked from commit b647c7df01)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull setting -EIO on the hung requests into its own utility function.
Having allowed ourselves to short-circuit submission of completed
requests, we can now do the mark_eio() prior to submission and avoid
some redundant operations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-4-chris@chris-wilson.co.uk
(cherry picked from commit 0d7cf7bc15)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We perform timeslicing immediately upon receipt of a request that may be
put into the second ELSP slot. The idea behind this was that since we
didn't install the timer if the second ELSP slot was empty, we would not
have any idea of how long ELSP[0] had been running and so giving the
newcomer a chance on the GPU was fair. However, this causes us extra
busy work that we may be able to avoid if we wait a jiffie for the first
timeslice as normal.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016100851.4979-1-chris@chris-wilson.co.uk
To ensure correct state data for compute workloads, we
need to keep the ff dop clock enabled.
References: HSDES#1606700617
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-5-mika.kuoppala@linux.intel.com
In order to ensure constant caches are invalidated
properly with a0, we need extra hdc flush after invalidation.
v2: use IS_TGL_REVID (Chris)
References: HSDES#1604544889
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-4-mika.kuoppala@linux.intel.com
Add hdc pipeline flush to ensure memory state is coherent
in L3 when we are done.
v2: Flush also in breadcrumbs (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-3-mika.kuoppala@linux.intel.com
Aim for completeness and invalidate also the ro parts
in l3 cache. This might allow to get rid of the preparser
disable/enable workaround on invalidation path.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-2-mika.kuoppala@linux.intel.com
There is no significance to our delay before clearing the semaphore the
engine is waiting on, so release it as soon as we acknowledge the CS
update following our preemption request. This should allow the GPU to
resume work earlier, if it was stuck on the semaphore at the end of a
request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015093204.25693-1-chris@chris-wilson.co.uk
We rely on only the tasklet being allowed to call into process_csb(), so
assert that is locked when we do. As the tasklet uses a simple bitlock,
there is no strong lockdep checking so we must make do with a plain
assertion that the tasklet is running and assume that we are the
tasklet!
v2: Fixup intel_gt_sanitize() to prepare each engine for the reset so
that the locks are marked as held during the reset
v3: Check for existent function pointers for very early sanitisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014121336.30137-1-chris@chris-wilson.co.uk
Since commit e2144503bf ("drm/i915: Prevent bonded requests from
overtaking each other on preemption") we have restricted requests to run
on their chosen engine across preemption events. We can take this
restriction into account to know that we will want to resubmit those
requests onto the same physical engine, and so can shortcircuit the
virtual engine selection process and keep the request on the same
engine during unwind.
References: e2144503bf ("drm/i915: Prevent bonded requests from overtaking each other on preemption")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ramlingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191013203012.25208-1-chris@chris-wilson.co.uk
We want the general purpose registers to be clear in all new contexts so
that we can be confident that no information is leaked from one to the
next.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014090757.32111-7-chris@chris-wilson.co.uk
Check the logical ring context by asserting that the registers hold
expected start during execution. (It's a bit chicken-and-egg for how
could we manage to execute our request if the registers were not being
updated. Still, it's nice to verify that the HW is working as expected.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014090757.32111-6-chris@chris-wilson.co.uk
NOA configuration take some amount of time to apply. That amount of
time depends on the size of the GT. There is no documented time for
this. For example, past experimentations with powergating
configuration changes seem to indicate a 60~70us delay. We go with
500us as default for now which should be over the required amount of
time (according to HW architects).
v2: Don't forget to save/restore registers used for the wait (Chris)
v3: Name used CS_GPR registers (Chris)
Fix compile issue due to rebase (Lionel)
v4: Fix save/restore helpers (Umesh)
v5: Move noa_wait from drm_i915_private to i915_perf_stream (Lionel)
v6: Add missing struct declarations in i915_perf.h
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012072308.30312-2-chris@chris-wilson.co.uk
Here we introduce a mechanism by which the execbuf part of the i915
driver will be able to request that a batch buffer containing the
programming for a particular OA config be created.
We'll execute these OA configuration buffers right before executing a
set of userspace commands so that a particular user batchbuffer be
executed with a given OA configuration.
This mechanism essentially allows the userspace driver to go through
several OA configuration without having to open/close the i915/perf
stream.
v2: No need for locking on object OA config object creation (Chris)
Flush cpu mapping of OA config (Chris)
v3: Properly deal with the perf_metric lock (Chris/Lionel)
v4: Fix oa config unref/put when not found (Lionel)
v5: Allocate BOs for configurations on the stream instead of globally
(Lionel)
v6: Fix 64bit division (Chris)
v7: Store allocated config BOs into the stream (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012072308.30312-1-chris@chris-wilson.co.uk
Sometimes we want to emit a terminator request, a request that flushes
the pipeline and allows no request to come after it. This can be used
for a "preempt-to-idle" to ensure that upon processing the
context-switch to that request, all other active contexts have been
flushed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012070136.32058-1-chris@chris-wilson.co.uk
We set out-of-bound parameters inside the i915_requests.flags field,
such as disabling preemption or marking the end-of-context. We should
not coalesce consecutive requests if they have differing instructions
as we only inspect the last active request in a context. Thus if we
allow a later request to be merged into the same execution context, it
will mask any of the earlier flags.
References: 2a98f4e65b ("drm/i915: add infrastructure to hold off preemption on a request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011190325.10979-9-chris@chris-wilson.co.uk
Add the missing serialisation on the request for a write into a vma to
wait until that vma is bound before being executed by the GPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011193620.14026-1-chris@chris-wilson.co.uk
Only the requests that have not completed do we want to change the
status of to signal the -EIO when cancelling the inflight set of requests
upon wedging.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011103345.26013-1-chris@chris-wilson.co.uk
Before we BUG out with bad pending state, leave a telltale as to which
test failed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010071434.31195-2-chris@chris-wilson.co.uk
If we have a wedged GPU that we need to recover, but fail, add a taint
for CI to pickup and schedule a reboot.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002160034.5121-1-chris@chris-wilson.co.uk
There are small differences between the blitter and the video engines in
the xcs context image (e.g. registers 0x200 and 0x204 only exist on the
blitter). Since we never explicitly set a value for those register and
given that we don't need to update the offsets in the lrc image when we
change engine within the class for virtual engine because the HW can
handle that, instead of having a separate define for the BCS we can
just restrict the programming to the part we're interested in, which is
common across the engines.
Bspec: 45584
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009230424.6507-2-daniele.ceraolospurio@intel.com
The specs don't mention any specific HW limitation on the blitter and
manual inspection shows that the HW does set the relative MMIO bit in
the LRI of the blitter context image, so we can remove our limitations.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009230424.6507-1-daniele.ceraolospurio@intel.com
The active/pending execlists is no longer protected by the
engine->active.lock, but is serialised by the tasklet instead. Update
the locking around the debug and stats to follow suit.
v2: local_bh_disable() to prevent recursing into the tasklet in case we
trigger a softirq (Tvrtko)
Fixes: df40306902 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009160906.16195-1-chris@chris-wilson.co.uk
(cherry picked from commit c36eebd9ba)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that we dropped the engine->active.lock serialisation from around
process_csb(), direct submission can run concurrently to the interrupt
handler. As such execlists->active may be advanced as we dequeue,
dropping the reference to the request. We need to employ our RCU request
protection to ensure that the request is not freed too early.
Fixes: df40306902 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009100955.21477-1-chris@chris-wilson.co.uk
(cherry picked from commit c949ae4314)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Due to the nature of preempt-to-busy the execlists active tracking and
the schedule queue may become temporarily desync'ed (between resubmission
to HW and its ack from HW). This means that we may have unwound a
request and passed it back to the virtual engine, but it is still
inflight on the HW and may even result in a GPU hang. If we detect that
GPU hang and try to reset, the hanging request->engine will no longer
match the current engine, which means that the request is not on the
execlists active list and we should not try to find an older incomplete
request. Given that we have deduced this must be a request on a virtual
engine, it is the single active request in the context and so must be
guilty (as the context is still inflight, it is prevented from being
executed on another engine as we process the reset).
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-2-chris@chris-wilson.co.uk
(cherry picked from commit cb2377a919)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we are asked to submit a completed request, just move it onto the
active-list without modifying it's payload. If we try to emit the
modified payload of a completed request, we risk racing with the
ring->head update during retirement which may advance the head past our
breadcrumb and so we generate a warning for the emission being behind
the RING_HEAD.
v2: Commentary for the sneaky, shared responsibility between functions.
v3: Spelling mistakes and bonus assertion
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-3-chris@chris-wilson.co.uk
(cherry picked from commit c0bb487dc1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since amalgamating the queued and active lists in commit 422d7df4f0
("drm/i915: Replace engine->timeline with a plain list"), performing a
i915_request_submit() will remove the request from the execlists
priority queue.
References: 422d7df4f0 ("drm/i915: Replace engine->timeline with a plain list")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-2-chris@chris-wilson.co.uk
(cherry picked from commit 3231f8c011)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The active/pending execlists is no longer protected by the
engine->active.lock, but is serialised by the tasklet instead. Update
the locking around the debug and stats to follow suit.
v2: local_bh_disable() to prevent recursing into the tasklet in case we
trigger a softirq (Tvrtko)
Fixes: df40306902 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009160906.16195-1-chris@chris-wilson.co.uk
Now that we dropped the engine->active.lock serialisation from around
process_csb(), direct submission can run concurrently to the interrupt
handler. As such execlists->active may be advanced as we dequeue,
dropping the reference to the request. We need to employ our RCU request
protection to ensure that the request is not freed too early.
Fixes: df40306902 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009100955.21477-1-chris@chris-wilson.co.uk
Assign a separate lockclass to the perma-pinned timelines of the
kernel_context, such that we can use them from within the user timelines
should we ever need to inject GPU operations to fixup faults during
request construction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008185941.15228-1-chris@chris-wilson.co.uk
A common bane of ours is arbitrary delays in ksoftirqd processing our
submission tasklet. Give the submission tasklet a kick before we wait to
avoid those delays eating into a tight timeout.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008105655.13256-1-chris@chris-wilson.co.uk
If we cannot claim the timeline->mutex while preparing for a wait on it,
we have to skip the timeline. In doing so, treat it as active so that
under a intel_gt_wait_for_idle() loop, we repeat the wait after
scheduling away.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191006165002.30312-4-chris@chris-wilson.co.uk
Avoid going to the base i915 device when we already have a path from gt
to the runtime powermanagement interface. The benefit is that it looks a
bit more self-consistent to always be acquiring the gt->uncore->rpm for
use with the gt->uncore.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007154531.1750-1-chris@chris-wilson.co.uk
Don't populate the array hw_engine_mask on the stack but instead make it
static. Makes the object code smaller by 316 bytes.
Before:
text data bss dec hex filename
34004 4388 320 38712 9738 gpu/drm/i915/gt/intel_reset.o
After:
text data bss dec hex filename
33528 4548 320 38396 95fc gpu/drm/i915/gt/intel_reset.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007154151.23245-1-colin.king@canonical.com
Force bonded requests to run on distinct engines so that they cannot be
shuffled onto the same engine where timeslicing will reverse the order.
A bonded request will often wait on a semaphore signaled by its master,
creating an implicit dependency -- if we ignore that implicit dependency
and allow the bonded request to run on the same engine and before its
master, we will cause a GPU hang. [Whether it will hang the GPU is
debatable, we should keep on timeslicing and each timeslice should be
"accidentally" counted as forward progress, in which case it should run
but at one-half to one-third speed.]
We can prevent this inversion by restricting which engines we allow
ourselves to jump to upon preemption, i.e. baking in the arrangement
established at first execution. (We should also consider capturing the
implicit dependency using i915_sched_add_dependency(), but first we need
to think about the constraints that requires on the execution/retirement
ordering.)
Fixes: 8ee36e048c ("drm/i915/execlists: Minimalistic timeslicing")
References: ee1136908e ("drm/i915/execlists: Virtual engine bonding")
Testcase: igt/gem_exec_balancer/bonded-slice
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-3-chris@chris-wilson.co.uk
(cherry picked from commit e2144503bf)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A few times in CI, we have detected a GPU hang on our Haswell GT2
systems with the characteristic IPEHR of 0x780c0000. When the PSMI w/a
was first introducted, it was applied to all Haswell, but later on we
found an erratum that supposedly restricted the issue to GT1 and so
constrained it only be applied on GT1. That may have been a mistake...
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111692
Fixes: 167bc759e8 ("drm/i915: Restrict PSMI context load w/a to Haswell GT1")
References: 2c55018347 ("drm/i915: Disable PSMI sleep messages on all rings around context switches")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917194746.26710-1-chris@chris-wilson.co.uk
(cherry picked from commit 56c05de6bd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
