msm8996 features 4 cpus - 2 in each cluster. However, all cpus implement
the same microarchitecture and the two clusters only differ in the
maximum frequency attainable by the CPUs.
Add capacity-dmips-mhz property to allow the topology code to determine
the actual capacity by taking into account the highest frequency for
each CPU.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add device bindings for cpuidle states for cpu devices.
msm8996 features 4 cpus - 2 in each cluster. However, all cpus implement
the same microarchitecture and the two clusters only differ in the
maximum frequency attainable by the CPUs.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Instead of using Qualcomm-specific terminology, use generic node names
for the idle states that are easier to understand. Move the description
into the "idle-state-name" property.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The idle-states binding documentation[1] mentions that the
'entry-method' property is required on 64-bit platforms and must be set
to "psci".
[1] Documentation/devicetree/bindings/arm/idle-states.txt (see
idle-states node)
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add a node describing the Turing Clock Controller of the QCS404. Given
the default access restriction the node is left disabled.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add device bindings for cpuidle states for cpu devices.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
[amit: rename the idle-states to more generic names and fixups]
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Some Adreno GPU targets require a special zap shader to bring the GPU
out of secure mode. Define a region to allocate and store the zap
shader.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[bjorn: Rebase ontop of recent reserved-memory patch]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add the nodes to describe the Adreno GPU and GMU devices for sdm845.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[bjorn: Added required gx power-domain]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The MTP is a "mobile reference device", as such the default operation is
to use fastboot to boot/flash software onto it and the common case is
thereby that we boot with a USB cable connected downstream from a PC or
a hub. And without support for the PMI8998 charger block VBUS will not
be driven by the device.
Switch to peripheral until we can enable OTG.
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Increase s3 max voltage in accordance to QCS404 CPR Fusing Guide Rev 6.0
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The current l3 min voltage level is not supported by
the regulator (the voltage is not a multiple of the regulator step size),
so a driver requesting this exact voltage would fail, see discussion in:
https://patchwork.kernel.org/comment/22461199/
It was agreed upon to set a min voltage level that is a multiple of the
regulator step size.
There was actually a patch sent that did this:
https://patchwork.kernel.org/patch/10819313/
However, the commit 331ab98f8c ("arm64: dts: qcom: qcs404:
Fix voltages l3") that was applied is not identical to that patch.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The adc outputs shouldn't contain information about their configuration
e.g. 100K pull-up, but just reflect the name of the signal in the
schematics.
Making them labels also allows us to overwrite their configuration in
board-specific DTs.
Sort them by order as used in adc5_chans_rev2, while we're at it.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Set the qcom,ratiometric property to make the VADC use the VDD reference
(1.875V) and GND for channel calibration of the temperature channels
instead of 1.25V. Allow a 200us delay between the AMUX configuration and
ADC starting conversion using qcom,hw-settle-time as described in
documentation.
Fixes: 041b9a7b9f ("arm64: dts: pms405: Export PMIC temperature to thermal framework")
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
SDM845 implements ARM's Dynamiq architecture that allows the big and
LITTLE cores to exist in a single cluster sharing the L3 cache.
Fix the cpu-map to put all cpus into a single cluster.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add the reset controller for the UFS controller, and wire it up
so that the UFS PHY can initialize itself without relying on
implicit sequencing between the two drivers.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
We've introduced power management logics for the Spreadtrum serial
controller by commit 062ec2774c8a ("serial: sprd: Add power management
for the Spreadtrum serial controller"), thus add related clock properties
to support this feature.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains one patch to disable the recently added XUSB support on
Jetson TX2 which is reported to cause boot and CPU hotplug failures in
some cases and doesn't allow the core power rail to be switched off.
Furthermore there are some changes to enable IOMMU support on more
devices. This is needed in order to prevent these devices from breaking
with the policy change in the ARM SMMU driver to break insecure devices
that is currently headed for v5.2.
-----BEGIN PGP SIGNATURE-----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=a/kH
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.2-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/late
arm64: tegra: Device tree fixes for v5.2-rc1
This contains one patch to disable the recently added XUSB support on
Jetson TX2 which is reported to cause boot and CPU hotplug failures in
some cases and doesn't allow the core power rail to be switched off.
Furthermore there are some changes to enable IOMMU support on more
devices. This is needed in order to prevent these devices from breaking
with the policy change in the ARM SMMU driver to break insecure devices
that is currently headed for v5.2.
* tag 'tegra-for-5.2-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Disable XUSB support on Jetson TX2
arm64: tegra: Enable SMMU translation for PCI on Tegra186
arm64: tegra: Fix insecure SMMU users for Tegra186
Signed-off-by: Olof Johansson <olof@lixom.net>
SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to multiplatform enabled.
- Cleanups of Davinci
This tag also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release.
-----BEGIN PGP SIGNATURE-----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=pUeO
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to
multiplatform enabled.
- Cleanups of Davinci
This also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
ARM: debug-ll: add default address for digicolor
ARM: u300: regulator: add MODULE_LICENSE()
ARM: ep93xx: move private headers out of mach/*
ARM: ep93xx: move pinctrl interfaces into include/linux/soc
ARM: ep93xx: keypad: stop using mach/platform.h
ARM: ep93xx: move network platform data to separate header
ARM: stm32: add AMBA support for stm32 family
MAINTAINERS: update arch/arm/mach-davinci
ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
soc: ixp4xx: qmgr: Add DT probe code
soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
soc: ixp4xx: npe: Add DT probe code
soc: ixp4xx: Add DT bindings for IXP4xx NPE
soc: ixp4xx: qmgr: Pass resources
soc: ixp4xx: Remove unused functions
soc: ixp4xx: Uninline several functions
soc: ixp4xx: npe: Pass addresses as resources
ARM: ixp4xx: Turn the QMGR into a platform device
ARM: ixp4xx: Turn the NPE into a platform device
...
- Document (kerneldoc) core mfd_add_devices() API
- New Drivers
- Add support for Altera SOCFPGA System Manager
- Add support for Maxim MAX77650/77651 PMIC
- Add support for Maxim MAX77663 PMIC
- Add support for ST Multi-Function eXpander (STMFX)
- New Device Support
- Add support for LEDs to Intel Cherry Trail Whiskey Cove PMIC
- Add support for RTC to SAMSUNG Electronics S2MPA01 PMIC
- Add support for SAM9X60 to Atmel HLCDC (High-end LCD Controller)
- Add support for USB X-Powers AXP 8xx PMICs
- Add support for Integrated Sensor Hub (ISH) to ChromeOS EC
- Add support for USB PD Logger to ChromeOS EC
- Add support for AXP223 to X-Powers AXP series PMICs
- Add support for Power Supply to X-Powers AXP 803 PMICs
- Add support for Comet Lake to Intel Low Power Subsystem
- Add support for Fingerprint MCU to ChromeOS EC
- Add support for Touchpad MCU to ChromeOS EC
- Move TI LM3532 support to LED
- New Functionality
- Add/extend DT support; max77650, max77620
- Add support for power-off; max77620
- Add support for clocking; syscon
- Add support for host sleep event; cros_ec
- Fix-ups
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
- Bug Fixes
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio
-----BEGIN PGP SIGNATURE-----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=dTSD
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Document (kerneldoc) core mfd_add_devices() API
New Drivers:
- Altera SOCFPGA System Manager
- Maxim MAX77650/77651 PMIC
- Maxim MAX77663 PMIC
- ST Multi-Function eXpander (STMFX)
New Device Support:
- LEDs support in Intel Cherry Trail Whiskey Cove PMIC
- RTC support in SAMSUNG Electronics S2MPA01 PMIC
- SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
- USB X-Powers AXP 8xx PMICs
- Integrated Sensor Hub (ISH) in ChromeOS EC
- USB PD Logger in ChromeOS EC
- AXP223 in X-Powers AXP series PMICs
- Power Supply in X-Powers AXP 803 PMICs
- Comet Lake in Intel Low Power Subsystem
- Fingerprint MCU in ChromeOS EC
- Touchpad MCU in ChromeOS EC
- Move TI LM3532 support to LED
New Functionality:
- max77650, max77620: Add/extend DT support
- max77620 power-off
- syscon clocking
- croc_ec host sleep event
Fix-ups:
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
Bug Fixes:
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio"
* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: Use dev_get_drvdata() directly
mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
mfd: cros_ec: Instantiate properly CrOS FP MCU device
mfd: cros_ec: Update the EC feature codes
mfd: intel-lpss: Add Intel Comet Lake PCI IDs
mfd: lochnagar: Add links to binding docs for sound and hwmon
mfd: ab8500-debugfs: Fix a typo ("deubgfs")
mfd: imx6sx: Add MQS register definition for iomuxc gpr
dt-bindings: mfd: LMU: Fix lm3632 dt binding example
mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
mfd: tps65912-spi: Add missing of table registration
mfd: axp20x: Add USB power supply mfd cell to AXP803
mfd: sun6i-prcm: Fix build warning for non-OF configurations
mfd: intel-lpss: Set the device in reset state when init
platform/chrome: Add support for v1 of host sleep event
mfd: cros_ec: Add host_sleep_event_v1 command
mfd: cros_ec: Instantiate the CrOS USB PD logger driver
mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
...
-----BEGIN PGP SIGNATURE-----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=55X1
-----END PGP SIGNATURE-----
Merge branches 'ib-mfd-arm-leds-5.2', 'ib-mfd-gpio-input-leds-power-5.2', 'ib-mfd-pinctrl-5.2-2' and 'ib-mfd-regulator-5.2', tag 'ib-mfd-arm-net-5.2' into ibs-for-mfd-merged
Immutable branch between MFD, ARM and Net due for the 5.2 merge window
The recently introduced XUSB support for Jetson TX2 is causing boot, CPU
hotplug and suspend/resume failures according to several reports.
Temporarily work around this by disabling the XUSB controller and XUSB
pad controller nodes in device tree, while we figure out what's causing
this.
Reported-by: Bitan Biswas <bbiswas@nvidia.com>
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Tested-by: Bitan Biswas <bbiswas@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 954a03be03 ("iommu/arm-smmu: Break insecure users by disabling
bypass by default") intentionally breaks all devices using the SMMU in
bypass mode. This breaks, among other things, PCI support on Tegra186.
Fix this by populating the iommus property and friends for the PCIe
controller.
Fixes: 954a03be03 ("iommu/arm-smmu: Break insecure users by disabling bypass by default")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 954a03be03 ("iommu/arm-smmu: Break insecure users by disabling
bypass by default") intentionally breaks all devices using the SMMU in
bypass mode. This is breaking various devices on Tegra186 which include
the ethernet, BPMP and HDA device. Fix this by populating the iommus
property for these devices with their stream ID.
Fixes: 954a03be03 ("iommu/arm-smmu: Break insecure users by disabling bypass by default")
Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
* skx_*: Librarize it so that it can be shared between drivers (Qiuxu Zhuo)
* altera: Stratix10 improvements (Thor Thayer)
* The usual round of fixes, fixlets and cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAlzP7hkACgkQEsHwGGHe
VUr1EA//R5XbYk3yucZ0w6IItELeLPO+bT2HWmTpxhIzKDMGBqefycLxYJd9P3AA
oNZufW91R4+idoZ8lmv0YA/NQuqncHnsk3MZGHCeX6hE20hRM5GuCIdx5X/UHxo0
pmpdN9vvIE3aUDy0vJbUk1wWlAJ0k6uCw4NFs0sHzJdTVHZPXluZtCejHC0RbdZ+
IS0AkscNf4Ksz6TWg/WJl6d5hSloRPReMSehRo1DfZfc4arIHpg/BerQN+jh2GOm
evWIxGlQifw+Q+922cWV1hl/S8PgXluLcV/FneCyMzIiE/kuglq2AROXli3jPwyI
VRuNZB+qeoWe3lSjCBcUNS6XzNhyRcZx5JJ5ghIC2zUBM7LHKxkIT0wu9gHpwKpT
gi6sZO98pwg+PwnNnIyC5aDmDzc3wjf1+JILlrWks8EtHwJ8pP0V972GFdMw1Ta9
l4KVLpEL8+7JO9jXerw/U5DKTXrB74sPlrLrvivsH2uYortSHV807aE5eb7xqNKy
eKRKfK95NSxnnv63PV4gIFc4ap6FH0Fy9y1qvncbHUeAoWeqxb/f4wcQsYMmw0xa
/Tpz+2oPUt2uPc9TryHkFtXUGfnFEyJdH8SFFThmje1QVwatzinmtUDnojj99Ewh
g6C362HZBXQymuzkRF637eYpDVrt+Cj1Z1c4Jxlgxfjc6/lSimg=
=GTck
-----END PGP SIGNATURE-----
Merge tag 'edac_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
- amd64_edac: Family 0x17, models 0x30-.. enablement (Yazen Ghannam)
- skx_*: Librarize it so that it can be shared between drivers (Qiuxu Zhuo)
- altera: Stratix10 improvements (Thor Thayer)
- The usual round of fixes, fixlets and cleanups
* tag 'edac_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
Revert "EDAC/amd64: Support more than two controllers for chip select handling"
arm64: dts: stratix10: Use new Stratix10 EDAC bindings
Documentation: dt: edac: Add Stratix10 Peripheral bindings
Documentation: dt: edac: Fix Stratix10 IRQ bindings
EDAC/altera, firmware/intel: Add Stratix10 ECC DBE SMC call
EDAC/altera: Initialize peripheral FIFOs in probe()
EDAC/altera: Do less intrusive error injection
EDAC/amd64: Adjust printed chip select sizes when interleaved
EDAC/amd64: Support more than two controllers for chip select handling
EDAC/amd64: Recognize x16 symbol size
EDAC/amd64: Set maximum channel layer size depending on family
EDAC/amd64: Support more than two Unified Memory Controllers
EDAC/amd64: Use a macro for iterating over Unified Memory Controllers
EDAC/amd64: Add Family 17h Model 30h PCI IDs
MAINTAINERS: Add entry for EDAC-I10NM
MAINTAINERS: Update entry for EDAC-SKYLAKE
EDAC, altera: Fix S10 Double Bit Error Notification
EDAC, skx, i10nm: Make skx_common.c a pure library
Mostly just incremental improvements here:
- Introduce AT_HWCAP2 for advertising CPU features to userspace
- Expose SVE2 availability to userspace
- Support for "data cache clean to point of deep persistence" (DC PODP)
- Honour "mitigations=off" on the cmdline and advertise status via sysfs
- CPU timer erratum workaround (Neoverse-N1 #1188873)
- Introduce perf PMU driver for the SMMUv3 performance counters
- Add config option to disable the kuser helpers page for AArch32 tasks
- Futex modifications to ensure liveness under contention
- Rework debug exception handling to seperate kernel and user handlers
- Non-critical fixes and cleanup
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlzMFGgACgkQt6xw3ITB
YzTicAf/TX1h1+ecbx4WJAa4qeiOCPoNpG9efldQumqJhKL44MR5bkhuShna5mwE
ptm5qUXkZCxLTjzssZKnbdbgwa3t+emW8Of3D91IfI9akiZbMoDx5FGgcNbqjazb
RLrhOFHwgontA38yppZN+DrL+sXbvif/CVELdHahkEx6KepSGaS2lmPXRmz/W56v
4yIRy/zxc3Dhjgfm3wKh72nBwoZdLiIc4mchd5pthNlR9E2idrYkQegG1C+gA00r
o8uZRVOWgoh7H+QJE+xLUc8PaNCg8xqRRXOuZYg9GOz6hh7zSWhm+f1nRz9S2tIR
gIgsCHNqoO2I3E1uJpAQXDGtt2kFhA==
=ulpJ
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Mostly just incremental improvements here:
- Introduce AT_HWCAP2 for advertising CPU features to userspace
- Expose SVE2 availability to userspace
- Support for "data cache clean to point of deep persistence" (DC PODP)
- Honour "mitigations=off" on the cmdline and advertise status via
sysfs
- CPU timer erratum workaround (Neoverse-N1 #1188873)
- Introduce perf PMU driver for the SMMUv3 performance counters
- Add config option to disable the kuser helpers page for AArch32 tasks
- Futex modifications to ensure liveness under contention
- Rework debug exception handling to seperate kernel and user
handlers
- Non-critical fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
Documentation: Add ARM64 to kernel-parameters.rst
arm64/speculation: Support 'mitigations=' cmdline option
arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB
arm64: enable generic CPU vulnerabilites support
arm64: add sysfs vulnerability show for speculative store bypass
arm64: Fix size of __early_cpu_boot_status
clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters
clocksource/arm_arch_timer: Remove use of workaround static key
clocksource/arm_arch_timer: Drop use of static key in arch_timer_reg_read_stable
clocksource/arm_arch_timer: Direcly assign set_next_event workaround
arm64: Use arch_timer_read_counter instead of arch_counter_get_cntvct
watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct
ARM: vdso: Remove dependency with the arch_timer driver internals
arm64: Apply ARM64_ERRATUM_1188873 to Neoverse-N1
arm64: Add part number for Neoverse N1
arm64: Make ARM64_ERRATUM_1188873 depend on COMPAT
arm64: Restrict ARM64_ERRATUM_1188873 mitigation to AArch32
arm64: mm: Remove pte_unmap_nested()
arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable
arm64: compat: Reduce address limit for 64K pages
...
- Added GPIO support for BM1880 SoC based on Designware APB GPIO
controller
- Added GPIO line names for Sophon Edge board based on 96Boards CE
specification for accessing GPIOs using line names from userspace
tools like MRAA.
- Added pinctrl node for BM1880 SoC as a child node of sctrl syscon
node.
- Added pinctrl support to UARTs exposed on the Sophon Edge board.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAlzGixQACgkQVZ8R5v6R
zvXzAwgAn+KrTa0tM+HdDFwW8S9jzPll9zOj5YcTSvopecsUu1d+qGy4knd3Ufev
HzeuD8gfUfxqaZ5nX9yETQ7XH6zwz4kTvGLh3jHhkdZ+SH7AYEdro9d8fEx71YD1
dEoUXSws5lWrvUusPzSsjWYCMbCOooBgXV2BjgK+jmVhE6HIDNSzIkQLrWRAgcxz
V5VyLw2p+4vwY8cPBs7K6N8u453y1a5zcK3644a6dw58vqTRtg5++Acp0xrXg66b
adFzIsUAto9W8mvwFYHwYty2NvdRWsSSnlZqfo8fopeUYUnzFKnlEHptisMcYuux
ITN7ZkQFjVFKGXUZTV1CK4rIAby2kA==
=7o9e
-----END PGP SIGNATURE-----
Merge tag 'bitmain-soc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-bitmain into arm/dt
Bitmain SoC changes for v5.2:
- Added GPIO support for BM1880 SoC based on Designware APB GPIO
controller
- Added GPIO line names for Sophon Edge board based on 96Boards CE
specification for accessing GPIOs using line names from userspace
tools like MRAA.
- Added pinctrl node for BM1880 SoC as a child node of sctrl syscon
node.
- Added pinctrl support to UARTs exposed on the Sophon Edge board.
* tag 'bitmain-soc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-bitmain:
arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge
arm64: dts: bitmain: Add pinctrl support for BM1880 SoC
arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board
arm64: dts: bitmain: Add GPIO support for BM1880 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add initial i.MX8MM SoC and EVK board support.
- Enable OPP table for cpufreq support on i.MX8MQ, i.MX8QXP and
i.MX8MM.
- A series from Andrey Smirnov to enable PCIe support for i.MX8MQ.
- Add TMU (Thermal Management Unit) device on i.MX8MQ for managing
thermal of CPU, GPU, and VPU.
- Add SDMA and SAI2 devices for i.MX8MQ SoC and enable wm8524 audio
support on EVK board.
- Add LPUART, OCOTP and GPU devices for i.MX8MQ SoC.
- Add initial i.MX8MQ based Zii Ultra board support
- Add SCU general IRQ and watchdog support for i.MX8QXP.
- Add audio related devices and PMU for LS1028A.
- Enable SATA and cpuidle support for LX2160A.
- Other small random updates.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcvXYXAAoJEFBXWFqHsHzOWlEH/iJbC6k4poz0+q2/skY1yfRk
7oJv+R62y6PiejRW44Rb/yY7H9D2WZS/r6lvo8XeG9zMJsKbi/NoeN9EUHu3uZDI
xrhEz/joDCS9LyEfsibRWNSFjm5wXUMw5qa+wpvSMvS4ipOv2lySZKeBzmjQq55v
2+OTO0S6r3totaJ203rp6jlmuhQK6NfC72umpcw8Wxmyfudi337xzbMH/dtm4Pb5
Q9G322cywDjZ3TukgMqWqg/s8kya7iKkyVb6abvEEAmCR2JZYzO0+XOpVLHbLDEi
lYC8ONALwOSyHW7mvxqB87qaCPinTH7PTKi3bNv+qgG1Fyemshs0nvPskaJO394=
=MK87
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.2:
- Add initial i.MX8MM SoC and EVK board support.
- Enable OPP table for cpufreq support on i.MX8MQ, i.MX8QXP and
i.MX8MM.
- A series from Andrey Smirnov to enable PCIe support for i.MX8MQ.
- Add TMU (Thermal Management Unit) device on i.MX8MQ for managing
thermal of CPU, GPU, and VPU.
- Add SDMA and SAI2 devices for i.MX8MQ SoC and enable wm8524 audio
support on EVK board.
- Add LPUART, OCOTP and GPU devices for i.MX8MQ SoC.
- Add initial i.MX8MQ based Zii Ultra board support
- Add SCU general IRQ and watchdog support for i.MX8QXP.
- Add audio related devices and PMU for LS1028A.
- Enable SATA and cpuidle support for LX2160A.
- Other small random updates.
* tag 'imx-dt64-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits)
arm64: dts: lx2160a: add cpu idle support
arm64: dts: imx8mq: fix GPU clock frequency
arm64: dts: fsl: imx8mq-evk: link regulator to GPU domain
arm64: dts: imx8mm: Add cpufreq properties
arm64: dts: imx8qxp-mek: Add i2c1 with pca9646
arm64: dts: imx8qxp: enable scu general irq channel
arm64: dts: imx8mq: add GPU node
arm64: dts: imx: add Zii Ultra board support
arm64: dts: imx8mq: fix higher CPU operating point
arm64: dts: imx8mq-evk: Enable PCIE0 interface
arm64: dts: imx8mq: Add nodes for PCIe IP blocks
arm64: dts: imx8mq: Combine PCIE power domains
arm64: dts: imx8mq: Add a node for SRC IP block
arm64: dts: imx8mq: Mark iomuxc_gpr as i.MX6Q compatible
arm64: dts: imx8qxp: Add lpuart1/lpuart2/lpuart3 nodes
arm64: dts: lx2160a: add sata node support
arm64: dts: ls1028a: Corrected the SATA ecc address
arm64: dts: imx8mq: Change ahb clock for imx8mq
arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
arm64: dts: imx8qxp: add system controller watchdog support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Add pinctrl support for UARTs exposed on the Sophon Edge board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Add pinctrl support for Bitmain BM1880 SoC. This SoC only supports
pinmuxing and the pinctrl registers are part of the sctrl block.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Add GPIO line names for Sophon Edge board based on BM1880 SoC from
Bitmain. Line names are based on the board schematics as well as the
96Boards Consumer Edition specification v1.0.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Add GPIO support for Bitmain BM1880 SoC based on Designware APB GPIO
controller IP. IP exposes 3 GPIO controllers with a total of 72 pins.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
- Pinctrl related fixes for the A33 NAND controller
- Fix the refcounting of DT nodes in our core code
- Fix for a typo'd DT property
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXLmrygAKCRDj7w1vZxhR
xWPzAPsG8IOfePeDDq5QtpXuO/ksMCb1H/+1dsHwe6yW2CFrQwD/W3p/n5i/ervO
tUtfb4a4uz0WthUrApkWlCUS30IGdwU=
=/Hf9
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-5.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Allwinner fixes for 5.1
- Pinctrl related fixes for the A33 NAND controller
- Fix the refcounting of DT nodes in our core code
- Fix for a typo'd DT property
* tag 'sunxi-fixes-for-5.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing
arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply
ARM: sunxi: fix a leaked reference by adding missing of_node_put
ARM: sunxi: fix a leaked reference by adding missing of_node_put
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add ADC temp for temp alarm node on PM8998
* Add ref clks for DSI PHYs on SDM845 and MSM8916
* Add CPU capacity and topology on SDM845
* Add display and gpu related nodes on MSM8996
* Add sound and hdmi display support on DB820C
* Fixup thermal nodes on MSM8998 platform
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=99VN
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt
Qualcomm ARM64 Updates for v5.2 - Part 2
* Add ADC temp for temp alarm node on PM8998
* Add ref clks for DSI PHYs on SDM845 and MSM8916
* Add CPU capacity and topology on SDM845
* Add display and gpu related nodes on MSM8996
* Add sound and hdmi display support on DB820C
* Fixup thermal nodes on MSM8998 platform
* tag 'qcom-arm64-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
arm64: dts: msm8998: thermal: Fix number of supported sensors
arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
arm64: dts: db820c: Add sound card support
arm64: dts: apq8096-db820c: Add HDMI display support
arm64: dts: Add Adreno GPU definitions
arm64: qcom: msm8996.dtsi: Add Display nodes
arm64: dts: msm8996: Add display smmu node
arm64: dts: msm8996: Add graphics smmu node
arm64: dts: sdm845: Add CPU capacity values
arm64: dts: sdm845: Add CPU topology
arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs
arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY
arm64: dts: qcom: pm8998: Use ADC temperature to temp-alarm node
Signed-off-by: Olof Johansson <olof@lixom.net>
for the rk3328-roc-cc and some minor fixes for rk3399 and rockpro64.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAly/g+YQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgX5oB/0Sub17eWc+RSKRLTKoBZooMK+aS4iEqzl9
T3Um1m0c/zR5XY+cMnmlvBUp9ryu/XEjiX9pi2EiE/Oio2Ty6t4q/4td+9BvH+gb
TbCmNI+ZVWvqrMyRAPjrXT3lJc2dOIWbf9Ej02MdZC/WSG5JfWMKfI8PxZRV4IlW
TSJbQLVVjrVcFk0J2Ov/iDyIuDNBOhN4zUNm3YbBGLJ0Wa0KmoaHa0qtTK5SRcEm
ZUztuzscla5nWo2kXI2Aw2UMiparGaqGT+uAODGdhIbgIsa+o2D9WzAfW4xalvlJ
NSzXvJIHGIDdWmBEku8JNitWh3S85Y4DYfXv/kGqWU6CYGaTqr5z
=Sd0J
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Bulk conversion of remaining gpios to the helper constants, new peripherals
for the rk3328-roc-cc and some minor fixes for rk3399 and rockpro64.
* tag 'v5.2-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
arm64: dts: rockchip: fix cts, rts pin assign of UART3 for rk3399
arm64: dts: rockchip: bulk convert gpios to their constant counterparts
arm64: dts: rockchip: enable display nodes on rk3328-roc-cc
arm64: dts: rockchip: eMMC additions for rk3328-roc-cc
Signed-off-by: Olof Johansson <olof@lixom.net>
The old "cooling-{min,max}-state" properties for thermal bindings were
ratified to "cooling-{min,max}-level" by commit eb168b70de ("of:
thermal: Fix inconsitency between cooling-*-state and cooling-*-level"),
which were later removed entirely by commit e04907dbc2 ("dt-bindings:
thermal: Remove "cooling-{min|max}-level" properties").
The pwm-fan binding, however, was apparently in-flight in parallel with
that ratification, and so managed to introduce an example of the old
properties which escaped the scope of the later cleanup and has thus
continued to be dutifully copied for new boards despite being useless.
Clean up these remaining undocumented anachronisms to minimise any
further confusion.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add wlan_disable signal hog for rfkill signal on clearfog-gt-8k
(Armada 8040 based board)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXL7EYQAKCRALBhiOFHI7
1f2CAJ4nM5kwS3ogb4dRIixdHzTVxZZabwCdE2uvCR2nncS4NC05L07TKISs/pk=
=v9Z0
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.2-1' of git://git.infradead.org/linux-mvebu into arm/dt
mvebu dt64 for 5.2 (part 1)
Add wlan_disable signal hog for rfkill signal on clearfog-gt-8k
(Armada 8040 based board)
* tag 'mvebu-dt64-5.2-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: clearfog-gt-8k: add wlan_disable signal hog
Signed-off-by: Olof Johansson <olof@lixom.net>
Our usual bunch of changes shared between arm and arm64, the most notable
one being:
- Fix of improper usage of DT bindings, thanks to the DT validation
- Add the SID for the H3 and H5
- New board: RerVision H3-DVK
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXLm2aQAKCRDj7w1vZxhR
xQJYAQDs7mcoEHwBqw+1iZGmHZuvj4jJXdAd/FkmoujMawaGoQD/a4zddy8AL7s9
WA9I42cSuBwfZjftLX/br4Ycssd1sgQ=
=90I8
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner H3/H5 changes for 5.2
Our usual bunch of changes shared between arm and arm64, the most notable
one being:
- Fix of improper usage of DT bindings, thanks to the DT validation
- Add the SID for the H3 and H5
- New board: RerVision H3-DVK
* tag 'sunxi-h3-h5-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: mapleboard: Remove cd-inverted
ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI
ARM: dts: sun8i: h3: bluetooth for Banana Pi M2 Zero board
ARM: dts: sun8i: h3: Add default dr_mode
ARM: dts: sun8i: h3: Refactor the pinctrl node names
ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry
ARM: dts: sunxi: h3/h5: Add device node for SID
ARM: dts: sun8i-h3: Add support for the RerVision H3-DVK board
Signed-off-by: Olof Johansson <olof@lixom.net>
This PR is pretty significant, but it been mostly about:
- Fixing the DTC warnings in most of our DT. We're now down to 2
warnings, from several thousands.
- Fixing a good number of minor issues, typos, and so on thanks to the DT
validation tools
- Describe the MBUS controller and the special DMA RAM mapping on the A13
- Add support for the LRADC on the A83t
- Add support for the I2C bus used for the PMIC on the A33
- Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXLmxsgAKCRDj7w1vZxhR
xQs0APwIUuCrLfRD0av6xeCI4bon+G6drCxNVqkgf/cm3sAd5AEAzd6Ok74CEJar
xlSPxgqpBxCVyt2bxQxfN5mch2OPKgA=
=HH/F
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner DT changes for 5.2
This PR is pretty significant, but it been mostly about:
- Fixing the DTC warnings in most of our DT. We're now down to 2
warnings, from several thousands.
- Fixing a good number of minor issues, typos, and so on thanks to the DT
validation tools
- Describe the MBUS controller and the special DMA RAM mapping on the A13
- Add support for the LRADC on the A83t
- Add support for the I2C bus used for the PMIC on the A33
- Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes
* tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (65 commits)
ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards
ARM: dtsi: axp81x: add USB power supply node
ARM: dts: sun5i: Reorder pinctrl nodes
ARM: dts: sun6i: i7: Remove useless property
ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO properties
ARM: dts: sun4i: protab2: Remove stale pinctrl-names entry
ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI
ARM: dts: sun8i: v40: bananapi-m2-berry: Sort device node dereferences.
ARM: dts: sun5i: Add the MBUS controller
dt-bindings: sunxi: Add compatible for OrangePi 3 board
ARM: dts: sun8i: a83t: Add I2C2 pinmux setting for PE pins
dt-bindings: arm: sunxi: Add Beelink GS1 board
ARM: dts: sun8i: tbs-a711: Add support for volume keys input
ARM: dts: sunxi: Add R_LRADC support for A83T
ARM: dts: sunxi: Improve A33 NAND transfers by using DMA
ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module)
ARM: dts: sunxi: Remove useless pinctrl nodes
ARM: dts: sunxi: Remove pinctrl groups setting bias
ARM: dts: sunxi: Remove useless address and size cells
ARM: dts: sunxi: Conform to DT spec for NAND controller
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains a bunch of changes all across the board. Perhaps the most
notable introduction here is support for the Jetson Nano Developer Kit.
-----BEGIN PGP SIGNATURE-----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=V3kv
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.2-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.2-rc1
This contains a bunch of changes all across the board. Perhaps the most
notable introduction here is support for the Jetson Nano Developer Kit.
* tag 'tegra-for-5.2-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Remove regulator hacks on Jetson TX2
arm64: tegra: Enable XUSB on P2771
arm64: tegra: Add XUSB and pad controller on Tegra186
arm64: tegra: Add NVIDIA Jetson Nano Developer Kit support
arm64: tegra: smaug: Move PLL power supplies to XUSB pad controller
arm64: tegra: jetson-tx1: Move PLL power supplies to XUSB pad controller
arm64: tegra: Enable command queue for Tegra186 SDMMC4
arm64: tegra: Fix default tap and trim values
arm64: tegra: Add supply for temperature sensor on P2888
arm64: tegra: Enable aconnect, ADMA and AGIC on Jetson TX1
arm64: tegra: Add L2 cache topology to Tegra210
arm64: tegra: Enable CPU idle support for Shield
arm64: tegra: Enable CPU idle support for Smaug
arm64: tegra: Enable CPU idle support for Jetson TX1
arm64: tegra: Add CPU idle states properties for Tegra210
arm64: tegra: Fix timer node for Tegra210
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add base support for Agilex platform
- Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform
- Increase Stratix10 QSPI support to 100 MHz
-----BEGIN PGP SIGNATURE-----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=PxBZ
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.2
- Add base support for Agilex platform
- Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform
- Increase Stratix10 QSPI support to 100 MHz
* tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA
arm64: dts: stratix10: increase QSPI max frequency to 100MHz
arm64: dts: stratix10: enable MMC highspeed support
ARM: dts: socfpga: enable MMC highspeed support
Signed-off-by: Olof Johansson <olof@lixom.net>
* Hi3660 SoC and related boards:
- Added DMA support for the uart nodes
- Added the asp DMA controller node
- Replaced dma-min-chan with dma-channel-mask to follow the binding
* Hi3670 SoC and related boards:
- Reused Hi3660 reset to support Hi3670, updated the binding
document and added dts node
- Reused Hi3660 MMC controller to support Hi3670, updated the
binding document and added related nodes to support SD and WiFi
for the SoC and hikey970 board
- Added UFS controller node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJctKRtAAoJEAvIV27ZiWZcHWUP/2adwR95p9SDb4WUZsmxWAPm
W3vveeLqack6K70ySStBmNCgrTyW5txJcJOFU4ceoERBOkpEfWJV6SEuWMma0ssW
Vz4Zs15T+d6Pz2UbIi7owhj1ooyxVuJpPwZRFMs0esD8d92ZuptTWAnnbyA5WCKB
Obvucl04QUHpzmCQAPKXW2icQFmGPCA+UOviSR/0Kj00XDhmxVkpUl54fe16r6e+
keVT5ElVuI4SZax5BPIHiUryKbujL6A+n7y3goV57MGkKhklJ78BRb3czxLUpgSq
xyqfYYnpTGszZ/gNIIYohHvp1N09dMXXhmIt22zfUCpG+1ClquK8oDtZzDBAl0wV
ZtXn1Khb+D96nzZobYIEhKX0ki76OeRIJAj1gxLkpMJkhp8amGLmeVJP6ER88zuN
ypVSpXfPnOAeGGcrVUIXhYIGqBWinM7iCasX9lctkD+Mui0bBjaF5NFWuNAIo74w
N57yNRQRdK0CMxuyU57lrxPzlmWibnSx3gVz8BXTSBBXDkTefmwKITDjyJ8swo8m
voeBOAYOdbdCKWaU5Nh1DAfBorvP3MPXi33KkdTUaMzkd5pqbNq02IqG7DlFE3L1
CMw4PnCgLoVVN8s7ud8l1wiXkeXJSgskE2P/c57/4t4cGargC8xyz8ALXobCJFGq
N795O6Za9LYzTQyLpyzn
=9+Sr
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for 5.2
* Hi3660 SoC and related boards:
- Added DMA support for the uart nodes
- Added the asp DMA controller node
- Replaced dma-min-chan with dma-channel-mask to follow the binding
* Hi3670 SoC and related boards:
- Reused Hi3660 reset to support Hi3670, updated the binding
document and added dts node
- Reused Hi3660 MMC controller to support Hi3670, updated the
binding document and added related nodes to support SD and WiFi
for the SoC and hikey970 board
- Added UFS controller node
* tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hi3670: Add UFS controller support
arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-mask
arm64: dts: hi3660: Add hisi asp dma device
arm64: dts: hi3660: Add dma to uart nodes
arm64: dts: hisilicon: hikey970: Add SD and WiFi support
arm64: dts: hisilicon: hi3670: Add MMC controller support
dt-bindings: mmc: Add HI3670 MMC controller binding
arm64: dts: hisilicon: hi3670: Add reset controller support
dt-bindings: reset: Add HI3670 reset controller binding
Signed-off-by: Olof Johansson <olof@lixom.net>
