-----BEGIN PGP SIGNATURE-----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=7zP6
-----END PGP SIGNATURE-----
Merge tag 'stratix10_dts_fix_for_v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into fixes
ARM: dts: stratix10: fix multicast filtering
On Stratix 10, the EMAC has 256 hash buckets for multicast filtering. This
needs to be specified in DTS, otherwise the stmmac driver defaults to 64
buckets and initializes the filter incorrectly. As a result, e.g. valid
IPv6 multicast traffic ends up being dropped.
* tag 'stratix10_dts_fix_for_v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10: fix multicast filtering
Signed-off-by: Olof Johansson <olof@lixom.net>
The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND
array and the VCCQ supplies the bus. On Salvator-X and ULCB, the VCC is
connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust
the pinmux to match the bus, which is always operating in 1.8V mode.
While at it, deduplicate the pinmux entries, which are now the same for
both default and UHS modes. We still need the two pinctrl entries to
match the bindings though.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Gru-Scarlet is a tablet device using ChomeOS, dual-dsi display
and Wacom touchscreen with stylus.
There exist two variants in the market using different displays
that are differentiated via their sku-id.
The bootloader on them also determines the correct devicetree to
load via the sku-id.
So add a common scarlet dtsi and two minimal board devicetrees
for the two display variants.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring <robh@kernel.org>
On Stratix 10, the EMAC has 256 hash buckets for multicast filtering. This
needs to be specified in DTS, otherwise the stmmac driver defaults to 64
buckets and initializes the filter incorrectly. As a result, e.g. valid
IPv6 multicast traffic ends up being dropped.
Fixes: 78cd6a9d8e ("arm64: dts: Add base stratix 10 dtsi")
Cc: stable@vger.kernel.org
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
This patch adds the device nodes for all HSCIF serial ports to
the R8A77990 SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe TMUs in the R8A779{7|8}0 device trees.
Based on the original (and large) patches by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables Audio for the Ebisu board on R8A77990 SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[simon: rebased]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds Audio-DMAC0 device node and Sound device node
for the R8A77990 SoC.
Based on work by Takeshi Kihara and Hai Nguyen Pham.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
[simon: dropped include update, which is already present]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds/enables USB2.0 peripheral for R-Car [DE]3 boards.
R-Car E3 Ebisu board connects the ID pin to the SoC, so this adds
a group "usb0_id" into usb0_pins node. Also, to use SW15 pin 3 side,
this patch adds vbus0_usb2 node on r8a77990-ebisu.dts.
R-Car D3 Draak board doesn't connect the ID pin, so this adds
"renesas,no-otg-pins" property into usb2_phy0 node.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds a property "companion" with xhci0 phandle to
the usb3_peri0 node in salvator-common.dtsi.
About the detail of this property for renesas_usb3 udc driver, please
refer to the commit 39facfa01c ("usb: gadget: udc: renesas_usb3:
Add register of usb role switch").
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Hook up the R-Car E3 AVB device to IPMMU-DS0 16 as described in
the data sheet.
Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Hook up the R-Car V3H AVB device to IPMMU-DS1 33 as described in
the data sheet.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Hook up the R-Car M3-N AVB device to IPMMU-DS0 16 as described in
the data sheet.
Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The "official" Condor boards have always been wired to mount NFS via
GEther, not EtherAVB -- the boards resoldered for EtherAVB were local
to Cogent Embedded, so we've been having an unpleasant situation where
a "normal" Condor board still can't mount NFS (unless an EtherAVB PHY
extension board is plugged in). Switch from EtherAVB to GEther at last!
Fixes: 8091788f3d ("arm64: dts: renesas: condor: add EtherAVB support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
hscif2 has 4 dmas, but has only 2 dma-names.
This patch add missing dma-names.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: e0f0bda793 ("arm64: dts: renesas: r8a7795: sort subnodes
of the soc node")
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds the device nodes for SCIF-{0,1,3,4,5} serial ports to
the R8A77990 SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe MSIOF in the R8A779{7|8}0 device trees.
The DMA props are omitted for R8A77980 as the RT-DMAC isn't supported
(yet?)...
Based on the original (and large) patches by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The M3-N (r8a77965) platform has one LVDS encoder connected to the DU.
Add the corresponding DT node and wire it up.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe THS/CIVM in the R8A77980 device trees.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe THS/CIVM in the R8A77970 device tree.
Based on the original (and large) patches by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe PWMs in the R8A779{7|8}0 device trees.
Based on the original (and large) patches by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds a device node for the Interrupt Controller for External
Devices (INTC-EX) on R-Car E3, which serves external IRQ pins IRQ[0-5].
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
commit 2d87dc0e5b ("arm64: dts: renesas: r8a7795: Add address
properties to rcar_sound port nodes") added missing #address-cells
and #size-cells for sound ports.
But, these are based on platform, not on SoC. This patch cleanups it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the device nodes for both RZ/G2M CAN channels.
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The backlight is for the eDP panel and it has the connector on the excavator baseboard.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
After commit 88ba95bedb ("backlight: pwm_bl: Compute brightness of LED
linearly to human eye") the pwm_bl driver is able to calculate a default
brightness table. The calculated table for this PWM will have more
granularity and will be adjusted to change the brightness linearly to
the human eye. Use that table instead of have a DT-defined table with
less granularity.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In order to use earlycon, the stdout-path property needs to be set
in the chosen node.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
eMMC that's sold by Pine64 can do HS200, rk3328 can do it
as well, so update DTS to enable it.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Sapphire board has a 12V fan. So, adding it to the DTS.
There is no power supply directly connected, it needs the baseboard to
work.
If the board is used standalone then a hardware modification is needed.
On the Sapphire board there is an unpopulated resistor to connect it to
VBUS_TYPEC, which is usually 5V (too low) and can range up to 20V
(too high).
I tested it for a week connected to VCC_SYS which is 8.4V and proved to
be more than enough for the required cooling needs. This is the
connection described in the comment.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add spi dma channels as specified by the rk3399 TRM.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There are close to 800 indivudal changesets in this branch again, which
feels like a lot. There are particularly many changes for the NVIDIA
Tegra platform this time, in fact more than it has seen in the two years
since the v4.9 merge window. Aside from this, it's been fairly normal,
with lots of changes going into Renesas R-CAR, NXP i.MX, Allwinner Sunxi,
Samsung Exynos, and TI OMAP.
Most of the changes are for adding new features into existing boards,
for brevity I'm only mentioning completely new machines and SoCs here.
For the first time I think we have (slightly) more new 64-bit hardware
than 32-bit:
Two boards get added for TI OMAP: Moxa UC-2101 is an industrial
computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5
is a minor variation of the motherboards of the GTA04 phone, see
https://shop.goldelico.com/wiki.php?page=GTA04A5
Clearfog is a nice little board for quad-core
Marvell Armada 8040 network processor, see
https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/
Two additional server boards come with the Aspeed baseboard management
controllers: Stardragon4800 is an arm64 reference platform made by HXT
(based on Qualcomm's server chips), and TiogaPass is an Open Compute
mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in
the BMC.
NXP i.MX usually sees a lot of new boards each release. This time there
we only add one minor variant: ConnectCore 6UL SBC Pro uses the same
SoM design as the ConnectCore 6UL SBC Express added later. However,
there is a new chip, the i.MX6ULZ, which is an even smaller variant
of the i.MX6ULL, with features removed. There is also support for the
reference board design, the i.MX6ULZ 14x14 EVK.
A new Raspberry Pi variant gets added, this one is the CM3 compute module
based on bcm2837, it was launched in early 2017 but only now added to
the kernel, both as 32-bit and as 64-bit files, as we tend to do for
Raspberry Pi.
On the Allwinner side, everything is again about cheap development
boards, usually of the "Fruit Pi" variety. The new ones this time
are:
Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/
Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/
Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts
Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html
The last one of these is now a 64-bit version of the earlier Banana
Pi M2+ H3, with the same board layout.
Similarly, for Rockchips, get get another variant of the 32-bit
Asus Tinker board, the model 'S' based on rk3288, and three now
boards based on the popular RK3399 chip:
ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/
Rock960: https://www.96boards.org/product/rock960/
RockPro64: https://www.pine64.org/?page_id=61454
These are all quite powerful boards with lots of RAM and I/O, and
the RK3399 is the same chip used in several Chromebooks. Finally,
we get support for the PX30 (aka rk3326) chip, which is based on the
low-end 64-bit Cortex-A35 CPU core. So far, only the evaluation board
is supported.
One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is based
on the MT7622 WiFi router platform, and the first product I've seen with
a 64-bit Mediatek chip in that market: http://www.banana-pi.org/r64.html
For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370
development board, which are similar to the Hi3660 and Hikey 360
respectively, but add support for an NPU.
Amlogic gets initial support for the Meson-G12A chip (S905D2),
another quad-core Cortex-A53 SoC, and its evaluation platform.
On the 32-bit side, we gain support for an actual end-user product,
the Endless Computers Endless Mini based on Meson8b (S805), see
https://endlessos.com/computers/
Qualcomm adds support for their MSM8998 SoC and evaluation platform. This
chip is commonly known as the Snapdragon 835, and is used in high-end
phones as well as low-end laptops.
For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added,
but no boards for this one. However, we do add boards for the previously
added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the M3NULCB
Starter Kit Pro.
While we have lots of DT changes for NVIDIA to update the existing files,
the only board that gets added is the Toradex Colibri T20 on Colibri
Evaluation Board for the old Tegra2.
Synaptics add support for their AS370 SoC, which is part of the (formerly
Marvell) Berlin line of set-top-box chips used e.g. in the various Google
Chromecast. Only the .dtsi gets added at this point, no actual machines.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=yaED
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Arnd Bergmann:
"There are close to 800 indivudal changesets in this branch again,
which feels like a lot. There are particularly many changes for the
NVIDIA Tegra platform this time, in fact more than it has seen in the
two years since the v4.9 merge window. Aside from this, it's been
fairly normal, with lots of changes going into Renesas R-CAR, NXP
i.MX, Allwinner Sunxi, Samsung Exynos, and TI OMAP.
Most of the changes are for adding new features into existing boards,
for brevity I'm only mentioning completely new machines and SoCs here.
For the first time I think we have (slightly) more new 64-bit hardware
than 32-bit:
Two boards get added for TI OMAP: Moxa UC-2101 is an industrial
computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5 is a
minor variation of the motherboards of the GTA04 phone, see
https://shop.goldelico.com/wiki.php?page=GTA04A5
Clearfog is a nice little board for quad-core Marvell Armada 8040
network processor, see
https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/
Two additional server boards come with the Aspeed baseboard management
controllers: Stardragon4800 is an arm64 reference platform made by HXT
(based on Qualcomm's server chips), and TiogaPass is an Open Compute
mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in the
BMC.
NXP i.MX usually sees a lot of new boards each release. This time
there we only add one minor variant: ConnectCore 6UL SBC Pro uses the
same SoM design as the ConnectCore 6UL SBC Express added later.
However, there is a new chip, the i.MX6ULZ, which is an even smaller
variant of the i.MX6ULL, with features removed. There is also support
for the reference board design, the i.MX6ULZ 14x14 EVK.
A new Raspberry Pi variant gets added, this one is the CM3 compute
module based on bcm2837, it was launched in early 2017 but only now
added to the kernel, both as 32-bit and as 64-bit files, as we tend to
do for Raspberry Pi.
On the Allwinner side, everything is again about cheap development
boards, usually of the "Fruit Pi" variety. The new ones this time are:
- Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/
- Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/
- Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts
- Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html
The last one of these is now a 64-bit version of the earlier Banana Pi
M2+ H3, with the same board layout.
Similarly, for Rockchips, get get another variant of the 32-bit Asus
Tinker board, the model 'S' based on rk3288, and three now boards
based on the popular RK3399 chip:
- ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/
- Rock960: https://www.96boards.org/product/rock960/
- RockPro64: https://www.pine64.org/?page_id=61454
These are all quite powerful boards with lots of RAM and I/O, and the
RK3399 is the same chip used in several Chromebooks. Finally, we get
support for the PX30 (aka rk3326) chip, which is based on the low-end
64-bit Cortex-A35 CPU core. So far, only the evaluation board is
supported.
One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is
based on the MT7622 WiFi router platform, and the first product I've
seen with a 64-bit Mediatek chip in that market:
http://www.banana-pi.org/r64.html
For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370
development board, which are similar to the Hi3660 and Hikey 360
respectively, but add support for an NPU.
Amlogic gets initial support for the Meson-G12A chip (S905D2), another
quad-core Cortex-A53 SoC, and its evaluation platform. On the 32-bit
side, we gain support for an actual end-user product, the Endless
Computers Endless Mini based on Meson8b (S805), see
https://endlessos.com/computers/
Qualcomm adds support for their MSM8998 SoC and evaluation platform.
This chip is commonly known as the Snapdragon 835, and is used in
high-end phones as well as low-end laptops.
For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added,
but no boards for this one. However, we do add boards for the
previously added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the
M3NULCB Starter Kit Pro.
While we have lots of DT changes for NVIDIA to update the existing
files, the only board that gets added is the Toradex Colibri T20 on
Colibri Evaluation Board for the old Tegra2.
Synaptics add support for their AS370 SoC, which is part of the
(formerly Marvell) Berlin line of set-top-box chips used e.g. in the
various Google Chromecast. Only the .dtsi gets added at this point, no
actual machines"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (721 commits)
ARM: dts: socfgpa: remove ethernet aliases from dtsi
arm64: dts: stratix10: add ethernet aliases
dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI
dt-bindings: mediatek: Add JPEG Decoder binding for MT7623
dt-bindings: iommu: mediatek: Add binding for MT7623
dt-bindings: clock: mediatek: add support for MT7623
ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites
ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
ARM: dts: da850-evm: Enable tca6416 on baseboard
arm64: dts: uniphier: Add USB2 PHY nodes
arm64: dts: uniphier: Add USB3 controller nodes
ARM: dts: uniphier: Add USB2 PHY nodes
ARM: dts: uniphier: Add USB3 controller nodes
arm64: dts: meson-axg: s400: disable emmc
arm64: dts: meson-axg: s400: add missing emmc pwrseq
arm64: dts: clearfog-gt-8k: add PCIe slot description
ARM: dts: at91: sama5d4_xplained: even nand memory partitions
ARM: dts: at91: sama5d3_xplained: even nand memory partitions
ARM: dts: at91: at91sam9x5cm: even nand memory partitions
ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets
...
These updates bring:
- Debugfs support for the Intel VT-d driver. When enabled, it
now also exposes some of its internal data structures to
user-space for debugging purposes.
- ARM-SMMU driver now uses the generic deferred flushing
and fast-path iova allocation code. This is expected to be a
major performance improvement, as this allocation path scales
a lot better.
- Support for r8a7744 in the Renesas iommu driver
- Couple of minor fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=q1HJ
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- Debugfs support for the Intel VT-d driver.
When enabled, it now also exposes some of its internal data
structures to user-space for debugging purposes.
- ARM-SMMU driver now uses the generic deferred flushing and fast-path
iova allocation code.
This is expected to be a major performance improvement, as this
allocation path scales a lot better.
- Support for r8a7744 in the Renesas iommu driver
- Couple of minor fixes and improvements all over the place
* tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
iommu/arm-smmu-v3: Remove unnecessary wrapper function
iommu/arm-smmu-v3: Add SPDX header
iommu/amd: Add default branch in amd_iommu_capable()
dt-bindings: iommu: ipmmu-vmsa: Add r8a7744 support
iommu/amd: Move iommu_init_pci() to .init section
iommu/arm-smmu: Support non-strict mode
iommu/io-pgtable-arm-v7s: Add support for non-strict mode
iommu/arm-smmu-v3: Add support for non-strict mode
iommu/io-pgtable-arm: Add support for non-strict mode
iommu: Add "iommu.strict" command line option
iommu/dma: Add support for non-strict mode
iommu/arm-smmu: Ensure that page-table updates are visible before TLBI
iommu/arm-smmu-v3: Implement flush_iotlb_all hook
iommu/arm-smmu-v3: Avoid back-to-back CMD_SYNC operations
iommu/arm-smmu-v3: Fix unexpected CMD_SYNC timeout
iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()
iommu/arm-smmu-v3: Fix a couple of minor comment typos
iommu: Fix a typo
iommu: Remove .domain_{get,set}_windows
iommu: Tidy up window attributes
...
Hygon Dhyana support (Pu Wen)
- sb_edac: New maintainer + fixes (Tony Luck)
Error reporting improvements and fixes (Qiuxu Zhuo)
- ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM error
accounting (Fan Wu)
- altera_edac: Stratix10 support and refactoring (Thor Thayer)
Out of tree addition:
- acpi_adxl: Address Translation interface using an ACPI DSM (Tony Luck)
- the usual amount of other misc fixes and cleanups all over.
-----BEGIN PGP SIGNATURE-----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=HEJK
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"The EDAC tree was busier than usual this cycle as the shortlog below
shows.
Also, this pull request is carrying an ACPI DSM driver which is used
to ask the platform to supply the DIMM location of a reported hardware
error and thus simplify all the EDAC logic when trying to map the
error address to the respective DIMM.
Core EDAC updates:
- amd64_edac: AMD family 0x17, models 0x10-0x2f support (Michael Jin)
Hygon Dhyana support (Pu Wen)
- sb_edac: New maintainer + fixes (Tony Luck) Error reporting
improvements and fixes (Qiuxu Zhuo)
- ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM
error accounting (Fan Wu)
- altera_edac: Stratix10 support and refactoring (Thor Thayer)
Out of tree addition:
- acpi_adxl: Address Translation interface using an ACPI DSM (Tony
Luck)
- the usual amount of other misc fixes and cleanups all over"
* tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits)
ACPI/ADXL: Add address translation interface using an ACPI DSM
EDAC, thunderx: Fix memory leak in thunderx_l2c_threaded_isr()
EDAC, skx_edac: Fix logical channel intermediate decoding
EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting
EDAC, altera: Work around int-to-pointer-cast warnings
EDAC, amd64: Add Hygon Dhyana support
EDAC: Raise the maximum number of memory controllers
arm64: dts: stratix10: Add peripheral EDAC nodes
EDAC, altera: Add Stratix10 peripheral support
EDAC, altera: Merge Stratix10 into the Arria10 SDRAM probe routine
arm64: dts: stratix10: Add SDRAM node
EDAC, altera: Combine Stratix10 and Arria10 probe functions
arm64: dts: stratix10: Additions to EDAC System Manager
EDAC, i7core: Remove set but not used variable pvt
EDAC, ghes: Use CPER module handles to locate DIMMs
EDAC: Correct DIMM capacity unit symbol
EDAC, sb_edac: Fix signedness bugs in *_get_ha() functions
EDAC, sb_edac: Fix reporting for patrol scrubber errors
EDAC, sb_edac: Return early on ADDRV bit and address type test
MAINTAINERS: Update maintainer for drivers/edac/sb_edac.c
...
Properly specify the RX and TX FIFO size which is important
for Jumbo frames.
Update the max-frame-size to support Jumbo frames.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add System Error Interrupt support to Armada SoCs (7K/8K)
- Add CPU idle support on Armada 8K
-----BEGIN PGP SIGNATURE-----
iFwEABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCW7Y4zAAKCRALBhiOFHI7
1QMVAKCqI2E6bf9ZiombIqMC/6/3IyxBMQCYxOCnpIbMbfaaufLkOf2XgOnq7g==
=KspX
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.20-2' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt64 for 4.20 (part 2)
- Add System Error Interrupt support to Armada SoCs (7K/8K)
- Add CPU idle support on Armada 8K
* tag 'mvebu-dt64-4.20-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: clearfog-gt-8k: add PCIe slot description
arm64: dts: marvell: add CP110 ICU SEI subnode
arm64: dts: marvell: use new bindings for CP110 interrupts
arm64: dts: marvell: add AP806 SEI subnode
arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K
arm64: dts: marvell: Add node labels for the cpus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
as the Vamrs Rock960. Another big feature is display support including hdmi
and the Innosilicon hdmiphy on the rk3328, right now enabled on the rock64.
The rock64 also got its spi-nor and spdif enabled. On the px30 we can see
dwc2-based usb support now and finally some misc fixes, like for a new dtc
warning, missing address and size cells and microSD fix on sapphire.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAluyLSYQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgSyPB/4y5G/sz6xboaYAj1G14gZDgBeG3PKI2ek1
klDXRhIETCBhwrxic5XErraF2PY+2KJybw85zUBt+d3Bnmixo85qqTKrAEzefvvw
A9cDtzCl1qOjMUcuYKOVjiyl0k5QsEr1Rsl77DCrupNHsOqE6jDQzZbCMSdWIxrG
5e6jyYYVPRibjOFS3AYBGJ5S026fHd/mq9GvUWPcOaOpDngQIvo26PD8H0vKWqXn
py61c0WkOp/revpv9x8Tazz1D9w+xn60jrnXSkKXyKn/sDpixZSPslR2u0oZXP58
lA+ku9XatjFkG1n2d00UQtb7QLpJod0Jrzcy/n5hSdY3C3mHjEE4
=7qWr
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Some additional new boards, the rk3399-based RockPro64 from Pine64, as well
as the Vamrs Rock960. Another big feature is display support including hdmi
and the Innosilicon hdmiphy on the rk3328, right now enabled on the rock64.
The rock64 also got its spi-nor and spdif enabled. On the px30 we can see
dwc2-based usb support now and finally some misc fixes, like for a new dtc
warning, missing address and size cells and microSD fix on sapphire.
* tag 'v4.20-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: enable display nodes on rk3328-rock64
arm64: dts: rockchip: add rk3328 display nodes
arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328
arm64: dts: rockchip: add missing address and size cells for rk3399 mipi dsi
arm64: dts: rockchip: Enable SPI NOR flash on Rock64
arm64: dts: rockchip: add initial dts support for Rockpro64
arm64: dts: rockchip: enable dwc2-based otg controller on px30-evb
arm64: dts: rockchip: add dwc2 otg controller on px30
dt-bindings: usb: dwc2: add description for px30
arm64: dts: rockchip: Enable SD card detection for Rock960 boards
arm64: dts: rockchip: Add support for Rock960 board
dt-bindings: arm: rockchip: Add binding for Rock960 board
arm64: dts: rockchip: Split out common nodes for Rock960 based boards
arm64: dts: rockchip: add spdif sound node for rock64
arm64: dts: rockchip: Fix microSD in rk3399 sapphire board
arm64: dts: rockchip: Fix I2C bus unit-address error on rk3399-puma-haikou
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add USB3 controller nodes including usb-core, resets, regulator, ss-phy
and hs-phy. This supports for LD20, PXs3 and the boards. This includes
additional efuse nodes for obtaining PHY trimming values.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
While it is possible to rework the s400 board to solder an eMMC on it,
it is not the default option and most boards are fitted with a NAND
instead.
Let's disable the emmc device by default to reflect this. The board
equipped with an eMMC will just have to alter the DT in the
bootloader, like we do for the reserved memory regions.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
eMMC pwrseq is defined in the s400 dts but not used in the emmc node.
This is probably just a copy/paste error
Fixes: 221cf34bac ("ARM64: dts: meson-axg: enable the eMMC controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This adds support for the PCIe interface on the CON4 mini-PCIe
connector.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The ICU handles several interrupt groups, each of them being a subpart
of the ICU node.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Create an ICU subnode for the NSR interrupts. This subnode becomes the
CP110 interrupt parent, removing the need for the ICU_GRP_NSR parameter.
Move all DT110 nodes to use these new bindings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add SD controller nodes for LD20 and PXs3.
LD20 does not support the UHS mode, while PXs3 supports it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add the System Error Interrupt node, representing an IRQ chip which is
part of the GIC. The SEI node aggregates interrupts from the AP through
wired interrupts, and from the CPs through MSIs.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This patch adds CPU deep Idle and Cluster deep Idle states BUT it defines
the idle state for each cpu (defined under cpu-idle-states parameter)
only for the quad version therefore it does NOT activate CPU Idle
capability for the other version.
[gregory: extract from a larger patch]
Signed-off-by: orenbh <orenbh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Aligned with what we have done for the others nodes. It will also allow
to easily modify the cpu configuration at board (or sub-SoC) level.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
- Add watchdog node on Armada 37xx
- Update PPv2 interrupts name
- Add support for the SolidRun Clearfog GT 8K (Aramda 8040 based)
- Add thermal-zone nodes for Aramda 7K/8K
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCW7HpQwAKCRALBhiOFHI7
1a8HAJ4tUZNYmuo9AWVWLj+FJaTBgQSJYgCaA+tkbl2J+bsZfL7JFpHGVukKmzc=
=4cF/
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.20-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt64 for 4.20 (part 1)
- Add watchdog node on Armada 37xx
- Update PPv2 interrupts name
- Add support for the SolidRun Clearfog GT 8K (Aramda 8040 based)
- Add thermal-zone nodes for Aramda 7K/8K
* tag 'mvebu-dt64-4.20-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: armada-37xx: add nodes to support watchdog
arm64: dts: marvell: armada-cp110: describe more PPv2 interrupts
arm64: dts: marvell: armada-cp110: change the PPv2 IRQ names
arm64: dts: add support for SolidRun Clearfog GT 8K
arm64: dts: marvell: add thermal-zone node in cp110 DTSI file
arm64: dts: marvell: add macro to make distinction between node names
arm64: dts: marvell: add thermal-zone node in ap806 DTSI file
arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add the second Dual UART device for LS208xA SoCs.
- Add necessary big-endian property for NOR device on LS104xA based
boards, remove unneeded big-endian property from IFC controller.
- DTC has new checks for I2C and SPI buses to land into 4.20. A patch
from Rob to fix the bus node names and warnings in unit-addresses.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbscRcAAoJEFBXWFqHsHzOxVQIALdjNChTrg5K0GBRTavdl+Hq
sOjW0W6Hh5MN4r1wKpSsKAPD/XsPmjMpsreC/qlR+uFGleKzhrHWRtbmR/FG7Aut
Sv052Yew5Fc8mWzNGNwQes6rpagRioqnLD6L6bPFoelgGsVFxrysDhAWhBgp7Zj8
HhQvgVaP2t2FDJX6O3Vbve4OgUNrmg5fp6bm19X3BSDa8Bsm6+9QU1w0ulCeWA/R
HXiGtECO+N1td3ViVh2iZMoQgvXSxY0twn2srMlFP+TsfOxKvC8lN2/RhwqtrbQs
AIWTbCuJHukGUQfRuIhVYhPUVZomPuaBUIBm8Semjn/dhjmBK7eXytFKY7AQcKM=
=BFcP
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Freescale arm64 device tree update for 4.20:
- Add the second Dual UART device for LS208xA SoCs.
- Add necessary big-endian property for NOR device on LS104xA based
boards, remove unneeded big-endian property from IFC controller.
- DTC has new checks for I2C and SPI buses to land into 4.20. A patch
from Rob to fix the bus node names and warnings in unit-addresses.
* tag 'imx-dt64-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: fsl: Fix I2C and SPI bus warnings
arm64: dts: ls208xa: add second duart
arm64: dts: fsl: remove big-endian field from IFC controller
arm64: dts: Add big-endian in nor node for ls104xa
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Our usual set of DT changes for the arm64 Allwinner SoCs.
The most notable things are:
- HDMI support on the A64
- New boards: OrangePi One Plus
-----BEGIN PGP SIGNATURE-----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=sPs9
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner arm64 DT changes for 4.20
Our usual set of DT changes for the arm64 Allwinner SoCs.
The most notable things are:
- HDMI support on the A64
- New boards: OrangePi One Plus
* tag 'sunxi-dt64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (28 commits)
arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay
arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI
arm64: dts: allwinner: a64: Add display pipeline
arm64: dts: allwinner: h6: add system controller device tree node
arm64: dts: allwinner: h6: Add OrangePi One Plus initial support
arm64: dts: allwinner: a64: Rename r_i2c_pins_a label to r_i2c_pl89_pins
arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins
arm64: dts: allwinner: a64: Split out data strobe pin from mmc2 pinmux
arm64: dts: allwinner: a64: NanoPi-A64: Add blue status LED
arm64: dts: allwinner: a64: NanoPi-A64: Add Wifi chip
arm64: dts: allwinner: a64: NanoPi-A64: Add Ethernet
arm64: dts: allwinner: a64: NanoPi-A64: Fix DCDC1 voltage
arm64: dts: allwinner: a64: Olinuxino: enable USB
arm64: dts: allwinner: a64: Olinuxino: add Ethernet nodes
arm64: dts: allwinner: a64: Olinuxino: fix DRAM voltage
arm64: dts: allwinner: a64: Orange Pi Win: Adjust CSI power rails
arm64: dts: allwinner: a64: Orange Pi Win: Add SPI flash node
arm64: dts: allwinner: a64: Orange Pi Win: Add SDIO node
arm64: dts: allwinner: a64: Orange Pi Win: Add LED node
arm64: dts: allwinner: a64: Orange Pi Win: Add UARTs
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is our usual H3/H5 pull request
The most notable changes are:
- the video decoding / encoding unit is finally enabled on the H3
- Mali support for the H5
- New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support
-----BEGIN PGP SIGNATURE-----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=AJmQ
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner H3 and H5 DT additions for 4.20
This is our usual H3/H5 pull request
The most notable changes are:
- the video decoding / encoding unit is finally enabled on the H3
- Mali support for the H5
- New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support
* tag 'sunxi-h3-h5-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees
ARM: dts: sun8i-h3: Add Video Engine and reserved memory nodes
arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5
ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus
ARM: dts: sun8i: h3: bpi-m2-plus: Fix address for external RGMII Ethernet PHY
ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block
arm64: dts: allwinner: h5: Add device node for Mali-450 GPU
ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 support
nvmem: sunxi-sid: add support for H5's SID controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove fixed clock in Cubieboard 7 and use Clock Management Unit clocks
for all UART nodes in Actions Semi S700 SoC.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Moved/added to SoC]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add pinctrl definitions for Actions Semiconductor S900 I2C controllers.
Pinctrl definitions are only available for I2C0, I2C1, and I2C2.
Enable I2C1 and I2C2 exposed on the low speed expansion connector in
Bubblegum-96 board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Squashed]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Bananapi released an updated revision of the H3/H5 based Bananapi M2+.
Version 1.2 enables voltage control for the CPU's regulator by using
a GPIO line to toggle a MOSFET that can change the effective resistance
value in the regulator's feedback network.
This patch adds a common .dtsi file for this new revision, which
includes the original common sunxi-bananapi-m2-plus.dtsi file, and
adds the GPIO-controlled regulator and a cpu-supply reference. H3
and H5 variant dts files are added as well.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Bananapi M2 Plus H5 is a variant of the original Bananapi M2 Plus,
with the H3 SoC replaced with an H5. Everything else is the same.
Add a stub device tree incorporating the shared bananapi-m2-plus dtsi
file.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The H5 has a Mali-450 GPU with 4 Pixel Processor cores.
Interestingly, while the datasheet lists an interrupt line for the GPU's
PMU, the hardware block itself doesn't seem to have it. Reads from the
PMU address range all return zero, and writes are ignored.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This contains mostly device tree changes to support faster SDHCI modes
on Tegra210 and Tegra186.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlutRCATHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoaEeD/9u+1Pv4ygX1eGlBCYoYDLNnzo+Eckn
KiZzrBnK5Wxl6X/SagxQBOK8QmzTJrIAWo0oRBcUknBWKKlP7xdM4DKHnWhWHvZZ
d7ulULfWDEaqcLXnlf5LH8XzrkG3UON/AA9IkAkx9jXwv7ipZVzDBN7kiLNBpZbU
BPra4HRWAw2H7umDC0STSnfQoyvJ0zidk86xEWHNRTkjaQvPjuz7GmKWcgsM6cFv
mh7ZdCqNYrW09D8CJwaCiSHx5DIVUyfoK9+BWxYyiYe2hOxZJHybVdOWZbjvg2K3
nD+tsV2/Ej9JUrBuxTz12IQ4Wpz/PQqkXTs3RBfzvh08+4tu20dWyt/Rj9LY5hWE
R0P4RD3LOMGlycAFiSm30cRQPieYqScHsYsW6FKlE42W/4gyABgItv+nfrIVtBUd
jg1XlDINhLcVTobKQAztssaPKm0iUbABrfCqccIdBSfSGIUSpxUsSlggmBYs11U+
+Yj20ObJgKvgY/1/t3VoIOYiSZ3foUq1ykqib1nVS84JJRPYVSMPy6cMu62tLT17
lyGP9SV/k5KuSrVyGyxtYiDrvWbXb+y4+4+5G3VepFkAo6CCf7GPYl92ZfAFMdGH
h4IV7nZb3SLxgp7J1KtGXwblegOtt/nEWn4WqtKZiLYukKd1kdZ4wZDQx1lpb40s
PCZzQrYnEKS/0w==
=DHnl
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
arm64: tegra: Device tree changes for v4.20-rc1
This contains mostly device tree changes to support faster SDHCI modes
on Tegra210 and Tegra186.
* tag 'tegra-for-4.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: I2C on Tegra194 is not compatible with Tegra114
arm64: dts: tegra186: Enable HS400
arm64: dts: tegra210: Enable HS400
arm64: dts: tegra186: Add SDMMC4 DQS trim value
arm64: dts: tegra210: Add SDMMC4 DQS trim value
arm64: dts: tegra186: Assign clocks for sdmmc1 and sdmmc4
arm64: dts: tegra210: Assign clocks for sdmmc1 and sdmmc4
arm64: dts: tegra186: Add SDHCI tap and trim values
arm64: dts: tegra210: Add SDHCI tap and trim values
arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the chain of display nodes from the core display-subsystem
through the one vop to the dw-hdmi output.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
changes in v3:
- drop reg from hdmi-in-port
changes in v2:
- remove trailing 0 from vop irq
The rk3328 uses a hdmiphy from Innosilicon, so add the necessary node
to the rk3328 soc devicetree.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
- new SoC support: basic support for G12A family
- new board: Amlogic U200 board, using G12A SoC
- fix SPI bus warnings from new dtc updates
-----BEGIN PGP SIGNATURE-----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=TU0T
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic ARM64 DT updates for v4.20, round 2
- new SoC support: basic support for G12A family
- new board: Amlogic U200 board, using G12A SoC
- fix SPI bus warnings from new dtc updates
* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT support
dt-bindings: arm: amlogic: Add Meson G12A binding
arm64: dts: meson: Fix erroneous SPI bus warnings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dtc has new checks for SPI buses. Fix the warnings in node names.
arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
Cc: Brijesh Singh <brijeshkumar.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds the system controller node for CPU Miscellaneous Registers
(which is needed for the watchdog node) and the watchdog node.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The PHY found on the A64-OLinuXino requires a TX delay in order to
operate properly. Olimex uses a 600ps second delay in their BSP, and
that has been found to work, so let's use that value in the current
DT.
Signed-off-by: Rodrigo Exterckötter Tjäder <rodrigo@tjader.xyz>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Switch to updated coresight bindings for hw ports
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Tegra194 contains a version of the I2C controller that is no longer
compatible with the version found in Tegra114.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch describes 3 additional interrupts per PPv2 port. Those
interrupts will be used later in future versions of the Marvell PPv2
driver, and now the device tree description matches the hardware
capabilities.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This patch changes the PPv2 IRQ names in the CP110 device tree to match
a corresponding change in the Marvell PPv2 driver. The reason this was
updated is the IRQ where names after Tx/Rx interrupts, but this is not
true and can be configured. A following patch will add more of them and
the names wouldn't make sense.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The SolidRun Clearfog GT-8K is based on Marvell Armada 8040 SoC.
https://wiki.solid-run.com/doku.php?id=products:a8040:clearfoggt8k
The following devices were tested with this DT on top of kernel
v4.19-rc4:
* 1GB Ethernet WAN
* 4 ports 1GB Ethernet switch (2.5GB uplink)
* SFP port
* SATA on CON3 PCIe slot
* USB3 type A port
* SD card and eMMC
* 2 LEDs
* 2 push buttons
[gregory: fix block comment alignement]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
DSI controllers are also the hosts of their dsi bus and therefore contain
nodes describing the attached panels with their reg properties containing
the virtual ids.
The dsi controller nodes on rk3399 lacked the #address-cells and #size-cells
for these subnodes, so add them.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Pine64 Rock64 board comes with a GigaDevice GD25Q128CSIG
or GD25Q127CSIG chip, which is a 128 Mbit SPI NOR flash chip
that supports the JEDEC read-ID command.
This patch enables the SPI controller and adds a device node
for the flash chip using the generic "jedec,spi-nor" comaptible.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rockpro64 is a rockchip RK3399 based board from pine64.org.
This patch adds basic device node support for Rockpro64 board and make it able
to bring up.
Peripheral Works
- Sdcard
- USB 2.0, 3.0
- Leds
- Ethernet
- Debug console
Not working:
- USB Type-C
Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>
Acked-by: Deepak Das <Deepak_Das@mentor.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Based on a similar patch of the R8A7796 device tree
by Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Adds LVDS decoder, HDMI encoder and connector for the Draak board.
The LVDS0 and LVDS1 encoders can use the DU_DOTCLKIN0, DU_DOTCLKIN1 and
EXTAL externals clocks. Two of them are provided to the SoC on the Draak
board, hook them up in DT.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the LVDS decoder, HDMI encoder, VGA encoder and HDMI and VGA
connectors, and wire up the display-related nodes with clocks, pinmux
and regulators.
The LVDS0 and LVDS1 encoders can use the DU_DOTCLKIN0, DU_DOTCLKIN1 and
EXTAL externals clocks. Two of them are provided to the SoC on the Ebisu
board, hook them up in DT.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The r8a77995 D3 platform has 2 LVDS channels connected to the DU.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
[uli: moved lvds* into the soc node, added PM domains, resets]
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Try to add basic DT support for the Amlogic's Meson-G12A S905D2 SoC,
which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
Timer, UART. It's capable of booting up into the serial console.
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
dtc has new checks for I2C and SPI buses. Fix the SPI bus node names
and warnings in unit-addresses.
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@57: I2C bus unit address format error, expected "53"
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@56: I2C bus unit address format error, expected "52"
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The R8A77990 (E3) platform has one RGB output and two LVDS outputs
connected to the DU. Add the DT nodes for the DU, LVDS encoders and
supporting VSP and FCP.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Commit a7eb26392b ("arm64: dts: broadcom: Add reference to Compute
Module IO Board V3") adds the bcm2837-rpi-cm3-io3.dts file as a target
in the Makefile, rather than the .dtb name. This will skip the
generation of the .dtb file at compile time and will fail the dtbs_install
target.
Fixes: a7eb26392b ("arm64: dts: broadcom: Add reference to Compute Module IO Board V3")
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for the bananapi R64 (BPI-R64) development board from
BIPAI KEJI. Detailed hardware information for BPI-R64 which could be
found on http://wiki.banana-pi.org/Banana_Pi_BPI-R64
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Fix ram size to 512 megabytes and sort nodes in alphabetical order.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add a built-in bluetooth 5 support for MT7622.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add device tree entries for timer, ARM CCI-400 and its PMU.
Otherwise, we add a cortex-a53-pmu node to enable hw perfevents.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable all necessary device tree nodes and add connector node to device
trees for all supported A64 boards with HDMI.
Jagan, tested on BPI-M64, OPI-Win, A64-Olinuxino, NPI-A64
Vasily, tested on pine64-lts
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Icenowy: squash all board patches altogether and change supply name]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Allwinner A64 have a display pipeline with 2 mixers/TCONs, the first
TCON is connected to LCD and the second is to HDMI.
The HDMI controller/PHY pair is similar to the one on H3/H5.
Add all required device tree nodes of the display pipeline, including
the TCON0 LCD one and the TCON1 HDMI one.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Icenowy: refactor commit message and add 1st pipeline]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
fsl-mc bus support the new iommu-map property. Comply to this binding
for fsl_mc bus.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Describe TPU in the R8A779{7|8}0 device trees.
Based on the original (and large) patches by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
R-Car Gen3 SoCs need to enable/deassert clocks/resets of both usb 2.0
host (included phy) and peripheral. Otherwise, other side device
cannot work correctly. So, this patch revises properties of clocks
and resets. After that, each device driver can enable/deassert
clocks/resets by its self.
Notes:
- To work the renesas_usbhs driver correctly when host side drivers
are disabled and the renesas_usbhs driver doesn't have multiple
clock management, this patch doesn't change the order of the clocks
property in each hsusb node.
- This patch doesn't have any side-effects even if the renesas_usbhs
driver doesn't have reset_control and multiple clock management.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
MMC host controller bindings and MMC core defines card detect pin as
active low. Therefore there is no point to invert it twice.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
It can't boot without bootargs settings on Uboot on ulcb board.
This patch adds missing default bootargs.
ulcb BSP can overwrite it by own UBoot settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This branch adds changes for the Texas Instruments AM654 SoC. Included
changes are:
- Add uart nodes
- Change address cells and size-cells of interconnect tfrom 1 to 2
- Add secure proxy instance for main domain
- Add DMSC support
-----BEGIN PGP SIGNATURE-----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=VyVP
-----END PGP SIGNATURE-----
Merge tag 'am654-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into next/dt
TI AM654 support for v4.20 merge window.
This branch adds changes for the Texas Instruments AM654 SoC. Included
changes are:
- Add uart nodes
- Change address cells and size-cells of interconnect tfrom 1 to 2
- Add secure proxy instance for main domain
- Add DMSC support
* tag 'am654-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-am6: Add Device Management Security Controller support
arm64: dts: ti: am654: Add secure proxy instance for main domain
arm64: dts: ti: am654: Add uart nodes
arm64: dts: ti: k3-am65: Change #address-cells and #size-cells of interconnect to 2
Signed-off-by: Olof Johansson <olof@lixom.net>
for 4.20, please pull the following:
- Stefan provides a reference to the Compute Module IO Board V3 such
that we can reference the arm counterpart and still build it for arm64
- Rob fixes I2C and SPI bus warnings which are going to show up with his
update to DTC scheduled for 4.20
-----BEGIN PGP SIGNATURE-----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=Ulpq
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.20/devicetree-arm64' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 4.20, please pull the following:
- Stefan provides a reference to the Compute Module IO Board V3 such
that we can reference the arm counterpart and still build it for arm64
- Rob fixes I2C and SPI bus warnings which are going to show up with his
update to DTC scheduled for 4.20
* tag 'arm-soc/for-4.20/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Fix I2C and SPI bus warnings
arm64: dts: broadcom: Add reference to Compute Module IO Board V3
Signed-off-by: Olof Johansson <olof@lixom.net>
New boards are the px30 eval board and roc-rk3399-pc.
The rk3328 got support for the one gpio controlled via the general
register files and the rk3399 finally got its idle-states defined.
And finally fixes and improvements for firefly-rk3399 (wifi),
roc-rk3328-cc (sdmmc-uhs, io-domains), rk3328-rock64 (gpio-regulator
pin fix) and rk3399-sapphire (gpio-regulator pin fix, pmic pin fix
and type-c port supply).
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAluaaskQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgTTdCACrfKOzRBY7rAmuo5abqWZGsAmbVLFmC/dG
ssxdF9uUAKS2vOV2OKu4364RZgBTXI4Ko+k4IT/mbQbAOduvlrcdHoB+a0IzSJJj
WGpFKTyt63uL9V34sLSXfJ7f0NevWXnBT54tisbvfOVHC+ysJ6MrvEiGl6eDcCkh
Hweejd/tzryFefgn4r2TClsGtew45cSo2ZO9IHNTaLSNxL2yz6r3jCwmWl3P7a8o
eBfvOllg/5FYKL1ybXs6/RJBOeowzOk9RBr9r2Q+7EGD6XsuU4W1DXc8wI57xwXP
bYP/JfQR/yGrJuX+eA6XxkMoGXu5VWSu6PFnyupIGpmJz2EG/kGL
=T4U2
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
New soc support for the px30 quad-core Cortex-A35.
New boards are the px30 eval board and roc-rk3399-pc.
The rk3328 got support for the one gpio controlled via the general
register files and the rk3399 finally got its idle-states defined.
And finally fixes and improvements for firefly-rk3399 (wifi),
roc-rk3328-cc (sdmmc-uhs, io-domains), rk3328-rock64 (gpio-regulator
pin fix) and rk3399-sapphire (gpio-regulator pin fix, pmic pin fix
and type-c port supply).
* tag 'v4.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add type-c port supply on rk3399-sapphire board
arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64
arm64: dts: rockchip: add WiFi module support for Firefly-RK3399
arm64: dts: rockchip: remove dvs2 pinctrl from pmic on rk3399-sapphire
arm64: dts: rockchip: Fix VCC5V0_HOST_EN on rk3399-sapphire
arm64: dts: rockchip: re-order vcc_sys on rk3399-sapphire
arm64: dts: rockchip: add missing vop properties for px30
arm64: dts: rockchip: Add idle-states to device tree for rk3399
arm64: dts: rockchip: add sdmmc UHS support for roc-rk3328-cc
arm64: dts: rockchip: add GRF GPIO controller to rk3328
arm64: dts: rockchip: add io-domain to roc-rk3328-cc
arm64: dts: rockchip: add PX30 evaluation board devicetree
arm64: dts: rockchip: add core dtsi file for PX30 SoCs
dt-bindings: rockchip: grf: add grf and pmugrf description for px30
arm64: dts: rockchip: add support for ROC-RK3399-PC board
Signed-off-by: Olof Johansson <olof@lixom.net>
For proper working of SD cards, let's add the Card Detect GPIO property
to the common devicetree for Rock960 family boards.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add devicetree support for Rock960 board, one of the Consumer Edition
boards of the 96Boards family. This board support utilizes the common
Rock960 family board support that includes Ficus 96Board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Since the same family members of Rock960 boards (Rock960 and Ficus)
share the same configuration, split out the common nodes into a common
dtsi file for reducing code duplication. The board specific nodes for
Ficus boards are then placed in corresponding board DTS file.
Below are some of the key differences between both Rock960 and Ficus
boards:
1. Different host enable GPIO for USB
2. Different power and reset GPIO for PCI-E
3. No Ethernet port on Rock960
Only the properties which differ between both boards are placed in the
board specific dts and the reset of the nodes are placed in common dtsi
file.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds sound card node for rock64. Currently we can support
S/PDIF only. It seems the lack of codec driver of rk3328 to enable
analog audio out.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The microSD card slot in the Sapphire board is not working because of
several issues:
1.- The vmmc power supply is missing in the DTS. It is capable of 3.0V
and has a GPIO-based enable control.
2.- The vqmmc power supply can provide up to 3.3V, but it is capped in
the DTS to just 3.0V because of the vmmc capability. This results in a
conflict from the mmc driver requesting an unsupportable voltage range
from 3.3V to 3.0V (min > max) as reported in dmesg. So, extend the
range up to 3.3V. The hw should be able to stand this 0.3V tolerance.
See mmc_regulator_set_vqmmc in drivers/mmc/core/core.c.
3.- The card detect signal is non-working. There is a known conflict
with jtag, but the workaround in drivers/soc/rockchip/grf.c does not
work. Adding the broken-cd attribute to the DTS fixes the issue.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
OF graph describes USB data lanes between USB-PHY and respective MUIC.
Since graph is present and DWC driver can use it to get extcon, obsolete
extcon property can be removed.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add a thermal-zone node and fill in all the sensors available in a
cp110 (only one in the thermal IP).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Because the label is different between CPs, the full path of a node is
unique. However, when referring to the end of the path only (the node
name), this name is not unique anymore.
The *thermal_zone_of_sensor_register() functions of the thermal core
present this limitation and prevent having a thermal-zone per CP.
Add a macro to make the distinction between node names to solve this
situation.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add a thermal-zone node and fill in all the sensors available in an
ap806 (one in the IC plus one per CPU).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
New bindings impose to declare the thermal IP from within a new syscon.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add devicetree support for HiKey970 development board which
based on Hi3670 SoC and is also one of the 96Boards Consumer
Edition and AI platform.
Only UART6 is enabled which is the default console required
by the 96Boards Consumer Edition Specification.
This patch has been tested on HiKey970 Board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add initial devicetree support for Hisilicon Hi3670 SoC which
is similar to Hi3660 SoC with NPU support.
This SoC has Octal core BigLittle CPUs in two clusters(4 * A53 & 4 * A73).
Only UART6 has been added for console support which is
pre configured by the bootloader. A fixed clock is sourcing
the UART6 which will get replaced by the clock driver when available.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The clocks property should either be present for all the CPUs of a
cluster or none. If these are present only for a subset of CPUs of a
cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add missing clocks property.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Describe CMTs in the R8A779{7|8}0 device trees.
Based on the original (and large) patches by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The PMIC and EEPROM can operate at 400kHz, so use this speed.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
For R-Car V3H hook up SYS-DMAC1 and SYS-DMAC2 to IPMMU-DS1 to match
information in the R-Car Gen3 Rev.1.00 (April 2018) datasheet.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
