Add the backlight device for the LVDS1 output, in preparation for panel
support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* Hi3660 SoC and related boards:
- Standardize LED labels and triggers for the hikey960 board
- Add the missing cooling-cells property for the cpu nodes
- Add all cpus into the cooling maps
* Hi3670 SoC and related boards:
- Add clock nodes and update the uart clock
- Add Pinctrl, GPIO and uart nodes
- Enable uart and add GPIO line names for the hikey970 board
* Hi3798 SoC and related boards:
- Standardize LED labels and triggers for the poplar board
* Hi6220 SoC and related boards:
- Standardize LED labels and triggers for the hikey board
- Add all cpus into the cooling maps
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hzY6
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi into next/dt
ARM64: DT: Hisilicon SoCs DT updates for 4.21
* Hi3660 SoC and related boards:
- Standardize LED labels and triggers for the hikey960 board
- Add the missing cooling-cells property for the cpu nodes
- Add all cpus into the cooling maps
* Hi3670 SoC and related boards:
- Add clock nodes and update the uart clock
- Add Pinctrl, GPIO and uart nodes
- Enable uart and add GPIO line names for the hikey970 board
* Hi3798 SoC and related boards:
- Standardize LED labels and triggers for the poplar board
* Hi6220 SoC and related boards:
- Standardize LED labels and triggers for the hikey board
- Add all cpus into the cooling maps
* tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi:
ARM64: dts: hisilicon: Add all CPUs in cooling maps
arm64: dts: hi3660: Add missing cooling device properties for CPUs
arm64: dts: hisilicon: poplar: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey960: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey970: Add GPIO line names
arm64: dts: hisilicon: hikey970: Enable on-board UARTs
arm64: dts: hisilicon: hi3670: Add UART nodes
arm64: dts: hisilicon: hi3670: Add GPIO controller support
arm64: dts: hisilicon: Add Pinctrl support for HiKey970 board
arm64: dts: hisilicon: Source SoC clock for UART6
arm64: dts: hisilicon: Add clock nodes for Hi3670 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
This updates the Versatile Express family DTS files to
contain the correct and detailed information required
for the PL11x DRM driver to work properly.
-----BEGIN PGP SIGNATURE-----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=4oHX
-----END PGP SIGNATURE-----
Merge tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt
Versatile Express DTS update for DRM:
This updates the Versatile Express family DTS files to
contain the correct and detailed information required
for the PL11x DRM driver to work properly.
* tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: Modernize the Vexpress PL111 integration
Signed-off-by: Olof Johansson <olof@lixom.net>
- Use SPDX license identifier for all SoCFPGA DTS files.
- Remove dma-mask property as it has been deprecated.
- Use tabs in DTS files.
- Use the specific "altr,stratix10-rst-mgr" property for the Stratix10
reset manager.
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAlv+teoUHGRpbmd1eWVu
QGtlcm5lbC5vcmcACgkQGZQEC4GjKPS9Sg//b6N0rtVZlkVaOVtTDR+X/y3/GKyx
ZCbNaCygR5Iy17nz2XU/h9R/QEPDCWllmJyykvJ4jorwHLeebI2+CDN6aYRSZrA5
dKw7OFsWntRYAE9Z2v23fATPK0Gc94GopcE0p53YBMS03atKdf06ORDdYPTWs+bi
4TmP40NcQzTvcNDuOrnkE1Kg1QhH6hakt5u5d2zt4JK7oCkLsMH9uOF4XuoqXDfc
1RatsAaSbA5JRAB09y+uvPrFrDeA3Guzx9FruBhR4EdSgDJzVnKLZM8/7z+Zmq52
lwIcpaWBtSgcvB7BgfxgCEsfDbTIlrupWuWGubIShD6oBBdXqk8m5t2E0wqTbyuq
LJ72OBpUIo2KvMb2Q2cBDW5nyTGkiimf7DUjcBRLmPtAbpubrovt8jJGyJqzzbvn
p6Rf2AfYm43WiyeNCJGk4nnzO+gGS6T/RTvDIjMhLLRJtiftuj3JRlcJ7Ihx2deO
Cwu84mbyLQjT9VGOuLdtXAy8fDsZfpkJ9DVavWq8FPbZCdKhuk3vSyrxSVx/QPHt
uWeauXbyaL+aTOx6pH7opdl84nOwb8zVrldunmhzv0UmrrylttHGS0Dr1L2JiPip
bOBaPmHKDUFNjgL67PLQ4QCXIUe+4YSFUqRwiyF6e47TR4yVj5cDsUbHI/ttPiR0
cvfeRb6etth+ri0=
=IDQS
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt
SoCFPGA DTS updates for v5.0
- Use SPDX license identifier for all SoCFPGA DTS files.
- Remove dma-mask property as it has been deprecated.
- Use tabs in DTS files.
- Use the specific "altr,stratix10-rst-mgr" property for the Stratix10
reset manager.
* tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10: use "altr,stratix10-rst-mgr" binding
ARM: dts: socfpga: use tabs for indentation
arm: dts: socfpga: remove dma-mask property
arm: dts: socfpga*.dts*: use SPDX-License-Identifier
Signed-off-by: Olof Johansson <olof@lixom.net>
for all Gru devices, rk3399 spi dma properties, some improvements for
the rk3399-sapphire board (fan, chosen, backlight), hs200 mode for the
emmc on the rock64 and declaring all cpu cores in the cooling maps
instead of just cpu0.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlv2ni0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgeaVB/4vKlFs9CKs+oj7Wi5+UoSbsBReHqAuENVm
6ShgnA15nCVaOzo3RT1ck8hHjKpAcTfX1siwmCK9OETwyxXI5vQCbKz3EIkoQYCQ
WIyyqlTs6Ars67ZSxJSPgitj8kguzEfJo7T+mOhhQK0nWS1jjJRmdtMcsYXqJbMg
OYj35cG4zRVFIQg87kQnVC3rkBu5Pb4LhY8J8+Ft2NUlRbUHBC08zgxe7oZLlTrt
AIquFnEdhjSz0KxeN66wtvEyMT1e36qTjW8/iu3YQOIaxFoIcxCtrXIfxplFId6o
f01Yu86wjfANQYIRzZLRV2GsLIlYpdiGk/aCQnSb6xgB4bcXiZQ9
=WIig
-----END PGP SIGNATURE-----
Merge tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
New dts for Gru-Scarlet (tablet device), default backlight brightness
for all Gru devices, rk3399 spi dma properties, some improvements for
the rk3399-sapphire board (fan, chosen, backlight), hs200 mode for the
emmc on the rock64 and declaring all cpu cores in the cooling maps
instead of just cpu0.
* tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add all CPUs in cooling maps
arm64: dts: rockchip: add Gru Scarlet devicetrees
arm64: dts: rockchip: move backlight from rk3399 sapphire to excavator
arm64: dts: rockchip: Use default brightness table for rk3399-gru
arm64: dts: rockchip: add chosen node on rk3399-sapphire
arm64: dts: rockchip: enable HS200 for eMMC on rock64
arm64: dts: rockchip: add fan on rk3399-sapphire board
arm64: dts: rockchip: add rk3399 SPI DMAs
Signed-off-by: Olof Johansson <olof@lixom.net>
The scm binding and driver was updated to rely on the fallback to the
default qcom,scm for any modern SoC and as such both are required. Add
the default compatible to make the scm instance probe.
Fixes: d850156a22 ("arm64: dts: qcom: msm8998: Add firmware node")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
While commit 3b7e7848f0 ("arm64: dts: renesas: r8a7795: Add IPMMU
device nodes") for R-Car H3 ES2.0 did include power-domains properties,
they were forgotten in the counterpart for older R-Car H3 ES1.x SoCs.
Fixes: e4b9a493df ("arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The R-Car Gen3 HardWare Manual Errata for Rev. 1.00 (Aug 24, 2018)
removed the IPMMU-IR IOMMU instance on R-Car M3-N, as this SoC does not
have an Image Processing Unit (IMP-X5) nor the A3IR power domain.
Fixes: 55697cbb44 ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The SDC2 control pins are typically used to manage sleep.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The externally accessible SD card slot on the MTP is driven by SDCC2.
Wire it up for use.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
SDCC2 is typically used as the controller for an external SD card slot.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The root parent clock of most msm8998 clock is the "xo" clock. The DT node
is incorrectly named "xo_board", which prevents Linux from correctly
parsing the clock tree, resulting in most clocks being unparented and
unable to be manipulated. The end result is that we can't turn on clocks
for peripherals like SD, so init usually fails.
Fixes: 4807c71cc6 (arm64: dts: Add msm8998 SoC and MTP board support)
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The Amlogic Meson GX SoCs embeds a clock measurer IP to measure the internal
clock paths frequencies.
This patch adds the node in the top-level meson-gx dtsi.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.
Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.
Update cooling maps to include all devices affected by individual trip
points.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This patch adds support for the Phicomm N1. This device based on P230 reference design.
And this box doesn't have cvbs, so disable related section in device tree.
Signed-off-by: He Yangxuan <yangxuan8282@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
On Amlogic chipsets, the bias set through pinconf applies to the pad
itself, not only the GPIO function. This means that even when we change
the function of the pad from GPIO to anything else, the bias previously
set still applies.
As we have seen with the eMMC, depending on the bias type and the function,
it may trigger problems.
The underlying issue is that we inherit whatever was left by previous user
of the pad (pinconf, u-boot or the ROM code). As a consequence, the actual
setup we will get is undefined.
There is nothing mentioned in the documentation about pad bias and pinmux
function, however leaving it undefined is not an option.
This change consistently disable the pad bias for every pinmux functions.
It seems to work well, we can only assume that the necessary bias (if any)
is already provided by the pin function itself.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
In some cases (such as a boot from SPI) the bootloader or the ROM code may
leave a bias pull-down on the mmc pins. If so the MMC will fail during the
initialisation.
Explicitly disabling the pinmux solves the problem.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
In the pinmux of the mmc clk_gate nodes, we define 2 subnodes. One for
the function definition, the other for the bias. This is not necessary
since we can define the function and the bias in the same subnode.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This patch disable EEE advertisement for P230 board (DWMAC + RTL8211F).
If not disable it, the network connection is not stable, will got issues
like throughput drop or broken link.
Signed-off-by: He Yangxuan <yangxuan8282@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Enable SCPI on the axg platform, with cpu clock and hwmon
(core temperature) support
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Correct the unit-address in the node name of the SRAM shared memory
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
MHU mailbox address is wrong. Fixing it enables the mailboxes on the A113.
These mailboxes are needed for SCPI
Fixes: 9d59b70850 ("arm64: dts: meson-axg: add initial A113D SoC DT support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The hdmi_5v regulator must be enabled to provide power to the physical HDMI
PHY and enables the HDMI 5V presence loopback for the monitor.
Fixes: b409f625a6 ("ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the secure monitor device to the axg platform.
With this, we can read the SoC serial number.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The uart used with bluetooth chipset on the s400 has flow control
available. Let's enable it.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The gpio line names were set in the pinctrl node instead of the gpio node,
at the time it was merged, it worked, but was obviously wrong.
This patch moves the properties to the gpio nodes.
Fixes: 60795933b7 ("ARM64: dts: meson-gxl-khadas-vim: Add GPIO lines names")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The gpio line names were set in the pinctrl node instead of the gpio node,
at the time it was merged, it worked, but was obviously wrong.
This patch moves the properties to the gpio nodes.
Fixes: b03c7d6438 ("ARM64: dts: meson-gxbb-odroidc2: Add GPIO lines names")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The gpio line names were set in the pinctrl node instead of the gpio node,
at the time it was merged, it worked, but was obviously wrong.
This patch moves the properties to the gpio nodes.
Fixes: 12ada0513d ("ARM64: dts: meson-gxbb-nanopi-k2: Add GPIO lines names")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The gpio line names were set in the pinctrl node instead of the gpio node,
at the time it was merged, it worked, but was obviously wrong.
This patch moves the properties to the gpio nodes.
Fixes: 47884c5c74 ("ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
section 2.2.1 of the DT specs says: " If the node has no reg property,
the @unit-address must be omitted and the node-name alone differentiates
the node from other nodes at the same level in the tree"
Simply replace the '@' with a '-' to fix this warning.
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This enables Bluetooth support for the following models:
- Khadas VIM basic (AP6212) using firmware BCM43438A1.hcd
- Khadas VIM pro (AP6255) using firmware BCM4345C0.hcd
The AP6212 module used on the VIM basic has an ID clash with another
device. To get Bluetooth working you either need to apply a kernel
patch to drivers/bluetooth/btbcm.c so 0x2209 loads BCM43438A1 or the
BCM43438A1.hcd firmware must be renamed to BCM43430A1.hcd.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.
Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.
Update cooling maps to include all devices affected by individual trip
points.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
For all 96Boards, the following standard is used for onboard LEDs.
green:user1 default-trigger: heartbeat
green:user2 default-trigger: mmc0/disk-activity(onboard-storage)
green:user3 default-trigger: mmc1 (SD-card)
green:user4 default-trigger: none, panic-indicator
yellow:wlan default-trigger: phy0tx
blue:bt default-trigger: hci0-power
So lets adopt the same for Poplar, which is one of the 96Boards
Enterprise edition platform.
Due to absence of WLAN and BT support, corresponding LED nodes are not
considered.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
For all 96Boards, the following standard is used for onboard LEDs.
green:user1 default-trigger: heartbeat
green:user2 default-trigger: mmc0/disk-activity(onboard-storage)
green:user3 default-trigger: mmc1 (SD-card)
green:user4 default-trigger: none, panic-indicator
yellow:wlan default-trigger: phy0tx
blue:bt default-trigger: hci0-power
So lets adopt the same for HiKey960 which is one of the 96Boards
CE platform.
Since there is no trigger available for onboard-storage UFS now, user2
trigger is set to none.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
For all 96Boards, the following standard is used for onboard LEDs.
green:user1 default-trigger: heartbeat
green:user2 default-trigger: mmc0/disk-activity(onboard-storage)
green:user3 default-trigger: mmc1 (SD-card)
green:user4 default-trigger: none, panic-indicator
yellow:wlan default-trigger: phy0tx
blue:bt default-trigger: hci0-power
So lets adopt the same for HiKey, which is one of the 96Boards
CE platform.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add GPIO line names for HiSilicon HiKey970 board based on HI3670 SoC.
The Line names are derived from "hikey970-schematics.pdf" document and
named in conjunction with 96Boards CE Specification v1.0.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The Versatile Express was submitted with the actual display
bridges unconnected (but defined in the device tree) and
mock "panels" encoded in the device tree node of the PL111
controller.
This doesn't even remotely describe the actual Versatile
Express hardware. Exploit the SiI9022 bridge by connecting
the PL111 pads to it, making it use EDID or fallback values
to drive the monitor.
The also has to use the reserved memory through the
CMA pool rather than by open coding a memory region and
remapping it explicitly in the driver. To achieve this,
a reserved-memory node must exist in the root of the
device tree, so we need to pull that out of the
motherboard .dtsi include files, and push it into each
top-level device tree instead.
We do the same manouver for all the Versatile Express
boards, taking into account the different location of the
video RAM depending on which chip select is used on
each platform.
This plays nicely with the new PL111 DRM driver and
follows the standard ways of assigning bridges and
memory pools for graphics.
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Tested-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The standard reset-simple driver the uses the "altr,rst-mgr" binding is
not getting initialized early enough in the boot process, so timers
that the kernel needs are still left in reset. Thus an early
reset driver was created. This early reset driver is only for the
SoCFPGA 32-bit platform.
The Stratix10 platform does not need any of the timers that in reset to
boot, thus we don't need to early reset driver. Therefore, use the
"altr,stratix10-rst-mgr" binding for the reset-simple platform driver on
the Stratix10 platform.
Also remove the "altr,modrst-offset" property because the driver no
longer needs it.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add pinctrl support based on "pinctrl-single" driver for HiKey970
development board from HiSilicon.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
