This patch defines TRANS_CONF registers for DSI ports
0 and 1. Bitfields of these registers used for enabling
and reading the current state of transcoder.
v2: Add blank line before comment
v3 by Jani:
- Move DSI specific .pipe_offsets to GEN11_FEATURES
- Macro placement and comment juggling
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3aa11e41ea0d4eb434423cc5ddf0a63b19d54deb.1539613303.git.jani.nikula@intel.com
As part of DSI enable sequence, transcoder timings
(horizontal & vertical) need to be set so that transcoder
will generate the stream output as per those timings.
This patch set required transcoder timings as per BSPEC.
v2: Remove TRANS_TIMING_SHIFT usage
v3 by Jani:
- Rebase
- Reduce temp variable use
- Checkpatch fix
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/525949ae4e919a4f2b807d606234322534656048.1539613303.git.jani.nikula@intel.com
This patch defines TRANS_DDI_FUNC_CTL and TRANS_DDI_FUNC_CTL2
registers and their bitfields for DSI. These registers are used
for enabling port sync mode, input pipe select, data lane width
configuration etc.
v2: Changes:
- Remove redundant extra line
- Correct some of bitfield definition
v3 by Jani:
- Move DSI transcoder offsets to GEN11_FEATURES
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6b2d87db82660320be10e423742cbf5a31e18037.1539613303.git.jani.nikula@intel.com
We wrongly assumed that GuC is only using last scratch register
for G2H messages, but in fact it is also using register [14] to
report sleep state status. Remove that register from our H2G
send registers pool.
v2: No message from host to GuC uses more than 8 registers and
the GuC FW itself uses an 8-element array to store the H2G message,
so we may reduce our send array to just 8 registers (Daniele)
v3: use explicit define (Daniele)
v4: and explicit comment (Daniele)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181019101725.14024-1-michal.wajdeczko@intel.com
This patch programs DSI operation mode, pixel format,
BGR info, link calibration etc for the DSI transcoder.
This patch also extract BGR info of the DSI panel from
VBT and save it inside struct intel_dsi which used for
configuring DSI transcoder.
v2: Rebase
v3: Use newly defined bitfields.
v4 by Jani:
- Use intel_dsi_bitrate()
- Make bgr_enabled bool
- Use 0 instead of 0x0
- Replace DRM_ERROR() with MISSING_CASE() on pixel format and video mode
- Use is_vid_mode()
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7de4e39a4b2a18e53a2b9d9cea5b5b4c9d6eeb34.1539613303.git.jani.nikula@intel.com
This patch defines transcoder function configuration
registers and its bitfields for both DSI ports.
Used while programming/enabling DSI transcoder.
v2: Changes (Jani N)
- Define _SHIFT and _MASK for bitfields
- Define values for fields already shifted in place
v3 by Jani:
- Fix _SHIFT fields copy-pasted from _MASK
- Indentation fixes
- Reduce S3D orientation to single macro
- Wrap a macro parameter in parens
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f188d3e59f27cbcac87d331af3d0222249db7fe4.1539613303.git.jani.nikula@intel.com
This patch programs D-PHY timing parameters for the
bus turn around flow(in escape clocks) only if dsi link
frequency <=800 MHz using DPHY_TA_TIMING_PARAM and its
identical register DSI_TA_TIMING_PARAM (inside DSI
Controller within the Display Core).
v2: Changes
- Don't use KHz() macro (Ville/Jani N)
- Use newly defined bitfields
v3 by Jani:
- Use intel_dsi_bitrate() in favor of a new field
- Remove redundant parens
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2c777092a748dfc973714399d8c19ed7a8c31a10.1539613303.git.jani.nikula@intel.com
This patch programs D-PHY timing parameters for the
clock and data lane (in escape clocks) of DSI
controller (DSI port 0 and 1).
These programmed timings would be used by DSI Controller
to calculate link transition latencies of the data and
clock lanes.
v2: Use newly defined bitfields for data and clock lane
v3 by Jani:
- Rebase on dphy abstraction
- Reduce local variables
- Remove unrelated comment changes (Ville)
- Use the same style for range checks as VLV (Ville)
- Assign, don't OR dphy_reg contents
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/70d491e2357f328a63b67ea3c43cb57a1d469c15.1539613303.git.jani.nikula@intel.com
Currently the guest couldn't boot up under GVT-g environment as the
following call trace exists:
[ 272.504762] BUG: unable to handle kernel NULL pointer dereference at 0000000000000100
[ 272.504834] Call Trace:
[ 272.504852] execlists_context_pin+0x2b2/0x520 [i915]
[ 272.504869] intel_gvt_scan_and_shadow_workload+0x50/0x4d0 [i915]
[ 272.504887] intel_vgpu_create_workload+0x3e2/0x570 [i915]
[ 272.504901] intel_vgpu_submit_execlist+0xc0/0x2a0 [i915]
[ 272.504916] elsp_mmio_write+0xc7/0x130 [i915]
[ 272.504930] intel_vgpu_mmio_reg_rw+0x24a/0x4c0 [i915]
[ 272.504944] intel_vgpu_emulate_mmio_write+0xac/0x240 [i915]
[ 272.504947] intel_vgpu_rw+0x22d/0x270 [kvmgt]
[ 272.504949] intel_vgpu_write+0x164/0x1f0 [kvmgt]
GVT GEM context is created by i915_gem_context_create_gvt() which
doesn't allocate ppgtt. So GVT GEM context structure doesn't have
a valid i915_hw_ppgtt.
This patch create ppgtt table at GVT GEM context creation, then assign
shadow ppgtt's root table address to this ppgtt when shadow ppgtt will
be used on GPU. So GVT GEM context has valid ppgtt address. But note
that this ppgtt only contain valid ppgtt root table address, the table
entry in this ppgtt structure are invalid.
Fixes:4a3d3f6785be("drm/i915: Match code to comment and enforce ppgtt for execlists")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1539841231-3157-1-git-send-email-xiong.y.zhang@intel.com
As mentioned in the previous commit, we currently prevent new modesets
on recently-removed MST connectors by returning no encoder from our
->best_encoder() callback once the MST port has disappeared. This is
wrong however, because it prevents legacy modesetting users from being
able to disable CRTCs on MST connectors after the connector's respective
topology has disappeared.
So, fix this by instead by just always returning a valid encoder.
Changes since v2:
- Remove usage of atomic MST helper for now, since that got replaced
with a much simpler solution
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-3-lyude@redhat.com
(cherry picked from commit e87b0bbc9f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Unfortunately, it appears our fix in:
commit b5d29843d8 ("drm/atomic_helper: Allow DPMS On<->Off changes
for unregistered connectors")
Which attempted to work around the problems introduced by:
commit 4d80273976 ("drm/atomic_helper: Disallow new modesets on
unregistered connectors")
Is still not the right solution, as modesets can still be triggered
outside of drm_atomic_set_crtc_for_connector().
So in order to fix this, while still being careful that we don't break
modesets that a driver may perform before being registered with
userspace, we replace connector->registered with a tristate member,
connector->registration_state. This allows us to keep track of whether
or not a connector is still initializing and hasn't been exposed to
userspace, is currently registered and exposed to userspace, or has been
legitimately removed from the system after having once been present.
Using this info, we can prevent userspace from performing new modesets
on unregistered connectors while still allowing the driver to perform
modesets on unregistered connectors before the driver has finished being
registered.
Changes since v1:
- Fix WARN_ON() in drm_connector_cleanup() that CI caught with this
patchset in igt@drv_module_reload@basic-reload-inject and
igt@drv_module_reload@basic-reload by checking if the connector is
registered instead of unregistered, as calling drm_connector_cleanup()
on a connector that hasn't been registered with userspace yet should
stay valid.
- Remove unregistered_connector_check(), and just go back to what we
were doing before in commit 4d80273976 ("drm/atomic_helper: Disallow
new modesets on unregistered connectors") except replacing
READ_ONCE(connector->registered) with drm_connector_is_unregistered().
This gets rid of the behavior of allowing DPMS On<->Off, but that should
be fine as it's more consistent with the UAPI we had before - danvet
- s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet
- Update documentation, fix some typos.
Fixes: b5d29843d8 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com
(cherry picked from commit 39b50c6038)
Fixes: e96550956f ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
Fixes: 34ca26a98a ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors")
Cc: stable@vger.kernel.org
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
It appears when testing my previous fix for some of the legacy
modesetting issues with MST, I misattributed some kernel splats that
started appearing on my machine after a rebase as being from upstream.
But it appears they actually came from my patch series:
[ 2.980512] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
[ 2.980516] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] is not registered
[ 2.980516] ------------[ cut here ]------------
[ 2.980519] Could not determine valid watermarks for inherited state
[ 2.980553] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
[ 2.980556] Modules linked in: i915(O+) i2c_algo_bit drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops drm(O) intel_rapl x86_pkg_temp_thermal iTCO_wdt wmi_bmof coretemp crc32_pclmul psmouse i2c_i801 mei_me mei i2c_core lpc_ich mfd_core tpm_tis tpm_tis_core wmi tpm thinkpad_acpi pcc_cpufreq video ehci_pci crc32c_intel serio_raw ehci_hcd xhci_pci xhci_hcd
[ 2.980577] CPU: 3 PID: 551 Comm: systemd-udevd Tainted: G O 4.19.0-rc7Lyude-Test+ #1
[ 2.980579] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET63WW (1.27 ) 11/10/2016
[ 2.980605] RIP: 0010:intel_modeset_init+0x14d7/0x19f0 [i915]
[ 2.980607] Code: 89 df e8 ec 27 02 00 e9 24 f2 ff ff be 03 00 00 00 48 89 df e8 da 27 02 00 e9 26 f2 ff ff 48 c7 c7 c8 d1 34 a0 e8 23 cf dc e0 <0f> 0b e9 7c fd ff ff f6 c4 04 0f 85 37 f7 ff ff 48 8b 83 60 08 00
[ 2.980611] RSP: 0018:ffffc90000287988 EFLAGS: 00010282
[ 2.980614] RAX: 0000000000000000 RBX: ffff88031b488000 RCX: 0000000000000006
[ 2.980617] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff880321ad54d0
[ 2.980620] RBP: ffffc90000287a10 R08: 000000000000040a R09: 0000000000000065
[ 2.980623] R10: ffff88030ebb8f00 R11: ffffffff81416590 R12: ffff88031b488000
[ 2.980626] R13: ffff88031b4883a0 R14: ffffc900002879a8 R15: ffff880319099800
[ 2.980630] FS: 00007f475620d180(0000) GS:ffff880321ac0000(0000) knlGS:0000000000000000
[ 2.980633] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.980636] CR2: 00007f9ef28018a0 CR3: 000000031b72c001 CR4: 00000000003606e0
[ 2.980639] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.980642] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2.980645] Call Trace:
[ 2.980675] i915_driver_load+0xb0e/0xdc0 [i915]
[ 2.980681] ? kernfs_add_one+0xe7/0x130
[ 2.980709] i915_pci_probe+0x46/0x60 [i915]
[ 2.980715] pci_device_probe+0xd4/0x150
[ 2.980719] really_probe+0x243/0x3b0
[ 2.980722] driver_probe_device+0xba/0x100
[ 2.980726] __driver_attach+0xe4/0x110
[ 2.980729] ? driver_probe_device+0x100/0x100
[ 2.980733] bus_for_each_dev+0x74/0xb0
[ 2.980736] driver_attach+0x1e/0x20
[ 2.980739] bus_add_driver+0x159/0x230
[ 2.980743] ? 0xffffffffa0393000
[ 2.980746] driver_register+0x70/0xc0
[ 2.980749] ? 0xffffffffa0393000
[ 2.980753] __pci_register_driver+0x57/0x60
[ 2.980780] i915_init+0x55/0x58 [i915]
[ 2.980785] do_one_initcall+0x4a/0x1c4
[ 2.980789] ? do_init_module+0x27/0x210
[ 2.980793] ? kmem_cache_alloc_trace+0x131/0x190
[ 2.980797] do_init_module+0x60/0x210
[ 2.980800] load_module+0x2063/0x22e0
[ 2.980804] ? vfs_read+0x116/0x140
[ 2.980807] ? vfs_read+0x116/0x140
[ 2.980811] __do_sys_finit_module+0xbd/0x120
[ 2.980814] ? __do_sys_finit_module+0xbd/0x120
[ 2.980818] __x64_sys_finit_module+0x1a/0x20
[ 2.980821] do_syscall_64+0x5a/0x110
[ 2.980824] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 2.980826] RIP: 0033:0x7f4754e32879
[ 2.980828] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f7 45 2c 00 f7 d8 64 89 01 48
[ 2.980831] RSP: 002b:00007fff43fd97d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 2.980834] RAX: ffffffffffffffda RBX: 0000559a44ca64f0 RCX: 00007f4754e32879
[ 2.980836] RDX: 0000000000000000 RSI: 00007f475599f4cd RDI: 0000000000000018
[ 2.980838] RBP: 00007f475599f4cd R08: 0000000000000000 R09: 0000000000000000
[ 2.980839] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000000000
[ 2.980841] R13: 0000559a44c92fd0 R14: 0000000000020000 R15: 0000000000000000
[ 2.980881] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
[ 2.980884] ---[ end trace 5eb47a76277d4731 ]---
The cause of this appears to be due to the fact that if there's
pre-existing display state that was set by the BIOS when i915 loads, it
will attempt to perform a modeset before the driver is registered with
userspace. Since this happens before the driver's registered with
userspace, it's connectors are also unregistered and thus-states which
would turn on DPMS on a connector end up getting rejected since the
connector isn't registered.
These bugs managed to get past Intel's CI partially due to the fact it
never ran a full test on my patches for some reason, but also because
all of the tests unload the GPU once before running. Since this bug is
only really triggered when the drivers tries to perform a modeset before
it's been fully registered with userspace when coming from whatever
display configuration the firmware left us with, it likely would never
have been picked up by CI in the first place.
After some discussion with vsyrjala, we decided the best course of
action would be to just move the unregistered connector checks out of
update_connector_routing() and into drm_atomic_set_crtc_for_connector().
The reason for this being that legacy modesetting isn't going to be
expecting failures anywhere (at least this is the case with X), so
ideally we want to ensure that any DPMS changes will still work even on
unregistered connectors. Instead, we now only reject new modesets which
would change the current CRTC assigned to an unregistered connector
unless no new CRTC is being assigned to replace the connector's previous
one.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 4d80273976 ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009204424.21462-1-lyude@redhat.com
(cherry picked from commit b5d29843d8)
Fixes: e96550956f ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
With the exception of modesets which would switch the DPMS state of a
connector from on to off, we want to make sure that we disallow all
modesets which would result in enabling a new monitor or a new mode
configuration on a monitor if the connector for the display in question
is no longer registered. This allows us to stop userspace from trying to
enable new displays on connectors for an MST topology that were just
removed from the system, without preventing userspace from disabling
DPMS on those connectors.
Changes since v5:
- Fix typo in comment, nothing else
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-2-lyude@redhat.com
(cherry picked from commit 4d80273976)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
- Fix GPU hang on MacBook2,1 when booting in EFI mode (Bugzilla #105637)
- Fix garbled console on Y tiled BIOS framebuffer configs (Bugzilla #108264)
- Fix black screen on certain eDP panels eg. Dell XPS 9350 (Bugzilla #107489 and #105338)
- MST fixes that Rodrigo dropped from drm-intel-fixes and bunch of Icelake fixes
- Then assorted proactive code fixes caught by CI or developers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018165725.GA2281@jlahtine-desk.ger.corp.intel.com
Replace the kvmalloc_array() with i915_gem_object_get_dma_address() when
populating rotated vmas. One random access mechanism ought to be enough
for everyone?
To calculate the size of the radix tree I think we can do
something like this (assuming 64bit pointers):
num_pages = obj_size / 4096
tree_height = ceil(log64(num_pages))
num_nodes = sum(64^n, n, 0, tree_height-1)
tree_size = num_nodes * 576
If we compare that with the object size we should get a relative
overhead of around .2% to 1% for reasonable sized objects,
which framebuffers tend to be.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016150413.11577-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Use single exit point to drop rpm wakeref in case of an error.
Fixes: 9d3eb2c33f ("drm/i915: Hold rpm wakeref for debugfs/i915_drop_caches_set")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018092025.24076-1-joonas.lahtinen@linux.intel.com
The test requires driver tweaks to avoid causing error messages
on intentionally-triggered errors and to stop accessing non
existing register. However, this is a pure GuC FW interface test
and should be covered by FW validation, so it isn't really worth
tweaking the driver for it and we're better off dropping it instead.
Testing the driver running out of doorbells is already covered by
igt_guc_doorbells
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018004610.22895-1-daniele.ceraolospurio@intel.com
intel_dsi_vbt_init() has grown too unwieldy, and it's about to be
modified due to ICL DSI. Abstract out the VLV specific dphy param
init. No functional changes. Intentionally no stylistic changes during
code movement.
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/96d15760db027a137f298ec330520ef8ec6474b0.1539613303.git.jani.nikula@intel.com
Encoders are not alike, make enable and disable hooks optional like
other hooks. Utilize this in DSI code, and remove the silly nop hook.
v2: Add the check also to intel_sanitize_encoder() (Madhav)
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Acked-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016124134.10257-1-jani.nikula@intel.com
In response for I915_PARAM_HAS_HUC we are returning value that
indicates if HuC firmware was loaded and verified. However, our
previously used positive value was based on specific register bit
which is about to change on future platform. Let's normalize our
return values to 0 and 1 before clients will start to use Gen9 value.
v2: use bool for implicit conversion (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Haihao Xiang <haihao.xiang@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> #1
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017195245.39644-1-michal.wajdeczko@intel.com
GEM_WARN_ON currently has dangerous semantics where it is completely
compiled out on !GEM_DEBUG builds. This can leave users who expect it to
be more like a WARN_ON, just without a warning in non-debug builds, in
complete ignorance.
Another gotcha with it is that it cannot be used as a statement. Which is
again different from a standard kernel WARN_ON.
This patch fixes both problems by making it behave as one would expect.
It can now be used both as an expression and as statement, and also the
condition evaluates properly in all builds - code under the conditional
will therefore not unexpectedly disappear.
To satisfy call sites which really want the code under the conditional to
completely disappear, we add GEM_DEBUG_WARN_ON and convert some of the
callers to it. This one can also be used as both expression and statement.
>From the above it follows GEM_DEBUG_WARN_ON should be used in situations
where we are certain the condition will be hit during development, but at
a place in code where error can be handled to the benefit of not crashing
the machine.
GEM_WARN_ON on the other hand should be used where condition may happen in
production and we just want to distinguish the level of debugging output
emitted between the production and debug build.
v2:
* Dropped BUG_ON hunk.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012063142.16080-1-tvrtko.ursulin@linux.intel.com
Since when it was introduced we forgot to add
this case so ICL was using a wrong signal_levels
as reference.
Fixes: fb5c8e9d43 ("drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017215652.26841-1-rodrigo.vivi@intel.com
(cherry picked from commit 61cdfb9e19)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are
from offset 12 & TC4 is at offset 21.
Create a function to choose correct clk-off bit.
v2: Add fixes tag (Lucas)
Fixes: c27e917e2b ("drm/i915/icl: add basic support for the ICL clocks")
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com
(cherry picked from commit bb1c7edc6d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This patch creates a function/wrapper to check if port is combophy port
instead of explicitly comparing ports.
Changes since V1:
- keep all intel_port_is_* helper together (Lucas)
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004085043.10154-1-mahesh1.kumar@intel.com
(cherry picked from commit 176597a12d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlvHll4ACgkQlvcN/ahK
Bwq+Bwf5AbcQDTCun9Qi1HGLxEJZJ/3CMY0PumrDf/U0qyLOs96GbwBJfG8orRpM
Fdyr91cQ0vWeMT3IvcHSj8lPhRRwSbzrLLYFZxoE9JLIaRzRovoavzXQH3IXZ6L0
MxO2t8ZhXlF9bM8dyrHHG7Q8OHdTjaoecTardtBn061cPXXQj4bhJxeCnIbjvMxv
Z4Uhq6vECz/X/xLifSb8Aag8riU0dsq0nqbMCU307xLiGW3Sg1vALcSgyMOlaHJq
iNVwG3rlDa0+6yAfEI1rGf3vy0zb5TohyC2b4934GRMmF55lgnu967npZeMRxKNU
yke98hm9T1b5xEMFXrfv94mQbYWisQ==
=+RQz
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-10-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- Add quirk to fix orientation of Acer One 10 (S1003) panel (Hans)
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017200741.GA240649@art_vandelay
If BIOS configured a Y tiled FB we failed to set up the backing object
tiling accordingly, leading to a lack of GT fence installed and a
garbled console.
The problem was bisected to
commit 011f22eb54 ("drm/i915: Do NOT skip the first 4k of stolen memory for pre-allocated buffers v2")
but it just revealed a pre-existing issue.
Kudos to Ville who suspected a missing fence looking at the corruption
on the screen.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: <ronald@innovation.ch>
Cc: <stable@vger.kernel.org>
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: <ronald@innovation.ch>
Tested-by: <ronald@innovation.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108264
Fixes: bc8d7dffac ("drm/i915/skl: Provide a Skylake version of get_plane_config()")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016160011.28347-1-imre.deak@intel.com
(cherry picked from commit 914a4fd8cd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For mmap-exhaustion, we deliberately put the system under a large amount
of pressure to ensure that we are able to reap mmap-offsets from dead
objects. If background activity does that reaping for us, that defeats
the purpose of the test and in some cases will fail our sanity checks
(because of the fake activity we use to prevent the idle worker).
Fixes: 932cac10c8 ("drm/i915/selftests: Prevent background reaping of acti
ve objects")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011103748.18387-1-chris@chris-wilson.co.uk
(cherry picked from commit 0b4bf7ca9b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This patch fixes the original commit c0cfb10d9e ("drm/i915/edp:
Do not do link training fallback or prune modes on EDP") that causes
a blank screen in case of certain eDP panels (Eg: seen on Dell XPS13 9350)
where first link training fails and a retraining is required by falling
back to lower link rate/lane count.
In case of some panels they advertise higher link rate/lane count
than whats required for supporting the panel's native mode.
But we always link train at highest link rate/lane count for eDP
and if that fails we can still fallback to lower link rate/lane count
as long as the fallback link BW still fits the native mode to avoid
pruning the panel's native mode yet retraining at fallback values
to recover from a blank screen.
v3:
* Add const for fixed_mode (Ville)
v2:
* Send uevent if link failure on eDP unconditionally
Fixes: c0cfb10d9e ("drm/i915/edp: Do not do link training fallback or prune modes on EDP")
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v4.17+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107489
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105338
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Alexander Wilson <alexander.wilson@ncf.edu>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009212804.702-1-manasi.d.navare@intel.com
(cherry picked from commit 1e712535c5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently, i915 appears to rely on blocking modesets on
no-longer-present MSTB ports by simply returning NULL for
->best_encoder(), which in turn causes any new atomic commits that don't
disable the CRTC to fail. This is wrong however, since we still want to
allow userspace to disable CRTCs on no-longer-present MSTB ports by
changing the DPMS state to off and this still requires that we retrieve
an encoder.
So, fix this by always returning a valid encoder regardless of the state
of the MST port.
Changes since v1:
- Remove mst atomic helper, since this got replaced with a much simpler
solution
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-6-lyude@redhat.com
(cherry picked from commit a9f9ca33d1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since we need to be able to allow DPMS on->off prop changes after an MST
port has disappeared from the system, we need to be able to make sure we
can compute a config for the resulting atomic commit. Currently this is
impossible when the port has disappeared, since the VCPI slot searching
we try to do in intel_dp_mst_compute_config() will fail with -EINVAL.
Since the only commits we want to allow on no-longer-present MST ports
are ones that shut off display hardware, we already know that no VCPI
allocations are needed. So, hardcode the VCPI slot count to 0 when
intel_dp_mst_compute_config() is called on an MST port that's gone.
Changes since V4:
- Don't use mst_port_gone at all, just check whether or not the drm
connector is registered - Daniel Vetter
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-5-lyude@redhat.com
(cherry picked from commit f67207d78c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently we set intel_connector->mst_port to NULL to signify that the
MST port has been removed from the system so that we can prevent further
action on the port such as connector probes, mode probing, etc.
However, we're going to need access to intel_connector->mst_port in
order to fixup ->best_encoder() so that it can always return the correct
encoder for an MST port to prevent legacy DPMS prop changes from
failing. This should be safe, so instead keep intel_connector->mst_port
always set and instead just check the status of
drm_connector->regustered to signify whether or not the connector has
disappeared from the system.
Changes since v2:
- Add a comment to mst_port_gone (Jani Nikula)
- Change mst_port_gone to a u8 instead of a bool, per the kernel bot.
Apparently bool is discouraged in structs these days
Changes since v4:
- Don't use mst_port_gone at all! Just check if the connector is
registered or not - Daniel Vetter
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-4-lyude@redhat.com
(cherry picked from commit 6ed5bb1fba)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Before we can reset the seqno, we have to be sure the engines are idle.
In debugfs/i915_drop_caches_set, we do wait_for_idle but allow ourselves
to be interrupted. We should only proceed to reset the seqno then if we
were not interrupted, and so also avoid overwriting the error status.
References: https://bugs.freedesktop.org/show_bug.cgi?id=108133
Fixes: 6b048706f4 ("drm/i915: Forcibly flush unwanted requests in drop-caches")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004082119.24970-1-chris@chris-wilson.co.uk
(cherry picked from commit 88a83f3c2d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When we decide that a plane is attached to the wrong pipe we try
to turn off said plane. However we are passing around the crtc we
think that the plane is supposed to be using rather than the crtc
it is currently using. That doesn't work all that well because
we may have to do vblank waits etc. and the other pipe might
not even be enabled here. So let's pass the plane's current crtc to
intel_plane_disable_noatomic() so that it can its job correctly.
To do that semi-cleanly we also have to change the plane readout
to record the plane's visibility into the bitmasks of the crtc
where the plane is currently enabled rather than to the crtc
we want to use for the plane.
One caveat here is that our active_planes bitmask will get confused
if both planes are enabled on the same pipe. Fortunately we can use
plane_mask to reconstruct active_planes sufficiently since
plane_mask still has the same meaning (is the plane visible?)
during readout. We also have to do the same during the initial
plane readout as the second plane could clear the active_planes
bit the first plane had already set.
v2: Rely on fixup_active_planes() to populate active_planes fully (Daniel)
Add Daniel's proposed comment to better document why we do this
Drop the redundant intel_set_plane_visible() call
Cc: stable@vger.kernel.org # fcba862e8428 drm/i915: Have plane->get_hw_state() return the current pipe
Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Cc: Daniel Vetter <daniel@ffwll.ch>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a6 ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003145017.4527-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 62358aa4ee)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Plane sanitation needs vblank interrupts (on account of CxSR disable).
So let's restore vblank interrupts earlier.
v2: Make it actually build
v3: Add comment to explain why we need this (Daniel)
Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a6 ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003144951.4397-1-ville.syrjala@linux.intel.com
(cherry picked from commit 68bc30deac)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
commit 4e0b83a567 ("drm/i915: Extract per-platform plane->check()
functions") removed the plane max stride check for sprite planes.
I was going to add it back when introducing GTT remapping for the
display, but after further thought it seems better to re-introduce
it separately.
So let's add the max stride check back. And let's do it in a nicer
form than what we had before and do it for all plane types (easy
now that we have the ->max_stride() plane vfunc).
Only sprite planes really need this for now since primary planes
are capable of scanning out the current max fb size we allow, and
cursors have more stringent stride checks elsewhere.
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 4e0b83a567 ("drm/i915: Extract per-platform plane->check() functions")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918140243.12207-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
(cherry picked from commit fc3fed5d29)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since when it was introduced we forgot to add
this case so ICL was using a wrong signal_levels
as reference.
Fixes: fb5c8e9d43 ("drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017215652.26841-1-rodrigo.vivi@intel.com
ret_code should be initialized with 0. The check of read/write
ptr should be activate when UVD_POWER_STATUS_TILES is off.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unfortunately, it appears our fix in:
commit b5d29843d8 ("drm/atomic_helper: Allow DPMS On<->Off changes
for unregistered connectors")
Which attempted to work around the problems introduced by:
commit 4d80273976 ("drm/atomic_helper: Disallow new modesets on
unregistered connectors")
Is still not the right solution, as modesets can still be triggered
outside of drm_atomic_set_crtc_for_connector().
So in order to fix this, while still being careful that we don't break
modesets that a driver may perform before being registered with
userspace, we replace connector->registered with a tristate member,
connector->registration_state. This allows us to keep track of whether
or not a connector is still initializing and hasn't been exposed to
userspace, is currently registered and exposed to userspace, or has been
legitimately removed from the system after having once been present.
Using this info, we can prevent userspace from performing new modesets
on unregistered connectors while still allowing the driver to perform
modesets on unregistered connectors before the driver has finished being
registered.
Changes since v1:
- Fix WARN_ON() in drm_connector_cleanup() that CI caught with this
patchset in igt@drv_module_reload@basic-reload-inject and
igt@drv_module_reload@basic-reload by checking if the connector is
registered instead of unregistered, as calling drm_connector_cleanup()
on a connector that hasn't been registered with userspace yet should
stay valid.
- Remove unregistered_connector_check(), and just go back to what we
were doing before in commit 4d80273976 ("drm/atomic_helper: Disallow
new modesets on unregistered connectors") except replacing
READ_ONCE(connector->registered) with drm_connector_is_unregistered().
This gets rid of the behavior of allowing DPMS On<->Off, but that should
be fine as it's more consistent with the UAPI we had before - danvet
- s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet
- Update documentation, fix some typos.
Fixes: b5d29843d8 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com
The ENTER/EXIT_S_STATE actions queue the save/restore operation in GuC
FW and then return, so waiting on the H2G is not enough to guarantee
GuC is done.
When all the processing is done, GuC writes 0 to scratch register 14,
so we can poll on that. Note that GuC does not ensure that the value
in the register is different from 0 while the action is in progress
so we need to take care of that ourselves as well.
v2: improve comment, return early on GuC error and improve error
message (Michal)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016224648.2326-1-daniele.ceraolospurio@intel.com
The Acer One 10 uses a clamshell design with a detachable keyboard.
As such in normal operating mode, with the keyboard attach the device
is in landscape mode (and the Acer logo at boot also shows in landscape
mode).
But the device uses a portrait screen rotated 90 degrees (sigh). This
commit adds a quirk for this device so that we shown the fbcon the
right way up and that we hint userspace to also show e.g. plymouth and
gdm the right way up.
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012101610.29100-1-hdegoede@redhat.com
If BIOS configured a Y tiled FB we failed to set up the backing object
tiling accordingly, leading to a lack of GT fence installed and a
garbled console.
The problem was bisected to
commit 011f22eb54 ("drm/i915: Do NOT skip the first 4k of stolen memory for pre-allocated buffers v2")
but it just revealed a pre-existing issue.
Kudos to Ville who suspected a missing fence looking at the corruption
on the screen.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: <ronald@innovation.ch>
Cc: <stable@vger.kernel.org>
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: <ronald@innovation.ch>
Tested-by: <ronald@innovation.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108264
Fixes: bc8d7dffac ("drm/i915/skl: Provide a Skylake version of get_plane_config()")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016160011.28347-1-imre.deak@intel.com
In commit 4502e9ec82 ("drm/i915/uc: Unify firmware loading") we
stopped converting errors detected during firmware transfer into
-EAGAIN and this indirectly killed our workarounds for Gen9 GuC.
Reactivate those workarounds by looking for actual -ETIMEDOUT error.
Testcase: igt@drv_selftest@live_hangcheck
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
References: commit 4502e9ec82 ("drm/i915/uc: Unify firmware loading")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016085931.23532-1-michal.wajdeczko@intel.com
Clang build with UBSAN enabled leads to the following build error:
drivers/gpu/drm/i915/intel_engine_cs.o: In function `intel_engine_init_execlist':
drivers/gpu/drm/i915/intel_engine_cs.c:411: undefined reference to `__compiletime_assert_411'
Again, for this to work the code would first need to be inlined and then
constant folded, which doesn't work for Clang because semantic analysis
happens before optimization/inlining.
Use GEM_BUG_ON() instead of BUILD_BUG_ON().
v2: Use is_power_of_2() from log2.h (Chris)
References: http://mid.mail-archive.com/20181015203410.155997-1-swboyd@chromium.org
Reported-by: Stephen Boyd <swboyd@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016122938.18757-2-jani.nikula@intel.com
When building the kernel with Clang with defconfig and CONFIG_64BIT
disabled, vmlinux fails to link because of the BUILD_BUG in
_print_param.
ld: drivers/gpu/drm/i915/i915_params.o: in function `i915_params_dump':
i915_params.c:(.text+0x56): undefined reference to
`__compiletime_assert_191'
This function is semantically invalid unless the code is first inlined
then constant folded, which doesn't work for Clang because semantic
analysis happens before optimization/inlining.
[The above written by Nathan Chancellor <natechancellor@gmail.com>]
Use WARN_ONCE() instead of BUILD_BUG() to avoid the problem. The
WARN_ONCE() should get optimized away unless there's a type that's not
handled by _print_param().
References: https://github.com/ClangBuiltLinux/linux/issues/191
References: http://mid.mail-archive.com/20181009171401.14980-1-natechancellor@gmail.com
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016122938.18757-1-jani.nikula@intel.com
Rename intel_get_pipe_from_connector() to intel_connector_get_pipe() and
move it near its connector function friends in intel_connector.c. No
functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016145044.3924-1-jani.nikula@intel.com
The error handling is wrong and "ent" could be NULL we when dereference
it to get "ent->d_inode".
The thing is that normally debugfs_create_file() is not supposed to
require (or have) any error handling. That function does return error
pointers if debugfs is turned off but we know it's enable here. When
it's enabled, then it returns NULL on error.
So what I did was I stripped out all the error handling except around
the i_size_write(). I could have just used a NULL check instead of an
IS_ERR_OR_NULL() but I figured this was more clear because that way you
don't have to look at the surrounding code to see whether debugfs is
enabled or not.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the PPtable structure to fit the latest SMC firmware.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PPTABLE structure is stretched to add I2C controller
configuration. Hold on the PPTABLE_V20_SMU_VERSION bump
until the VBIOS is ready.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix a typo in for loop: i->j
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are
from offset 12 & TC4 is at offset 21.
Create a function to choose correct clk-off bit.
v2: Add fixes tag (Lucas)
Fixes: c27e917e2b ("drm/i915/icl: add basic support for the ICL clocks")
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com
combo-phy register instances are at same offset from base for each
combo-phy port, i.e.
Port A base offset: 0x16200
Port B base offset: 0x6C000
All the other addresses for both ports can be derived by calculating
offset to these base addresses.
PORT_CL_DW_OFFSET 0x0
PORT_CL_DW<x> 0 + x * 4
PORT_COMP_OFFSET 0x100
PORT_COMP_DW<x> 0x100 + x * 4
PORT_PCS_AUX_OFFSET 0x300
PORT_PCS_GRP_OFFSET 0x600
PORT_PCS_LN<y>_OFFSET 0x800 + y * 0x100
PORT_TX_AUX_OFFSET 0x380
PORT_TX_GRP_OFFSET 0x680
PORT_TX_LN<y>_OFFSET 0x880 + y * 0x100
And inside each PORT_TX_[AUX|GRP|LN] we add `dw * 4`.
Based on original patch by Mahesh Kumar <mahesh1.kumar@intel.com>.
v2: make port, dw and ln arguments follow the order in
register's name
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023517.8576-1-lucas.demarchi@intel.com
This patch combines CNL/ICL specific port/combophy macros together
at one location. This is prework for patches later in series where
new macros to find port/combophy register will be introduced.
v2: remove wrong empty line
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012234717.8284-1-lucas.demarchi@intel.com
This patch adds helper function for identifying
whether the given PLL is combo PHY PLL or not.
This helper function is used inside various ICL
functions to make them scalable.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003072203.12848-6-mahesh1.kumar@intel.com
Use intel_port_is_tc and intel_port_is_combophy
functions to replace the individual port checks
from port C to F and port A to B respectively.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003072203.12848-5-mahesh1.kumar@intel.com
Use the existing port-to-id helper function, to refactor
hence making it scalable.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003072203.12848-4-mahesh1.kumar@intel.com
This patch creates a function/wrapper to check if port is combophy port
instead of explicitly comparing ports.
Changes since V1:
- keep all intel_port_is_* helper together (Lucas)
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004085043.10154-1-mahesh1.kumar@intel.com
Display WA #1178 is meant to fix Aux channel voltage swing too low with
some type C dongles. It applies to external ports on combo phy. On
Icelake this is port A and B when those are not eDP.
v2: follow the spec to the letter: include Aux A and just check if it's
not eDP instead of checking only for Aux B.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012215758.25342-1-lucas.demarchi@intel.com
has_drrs is a flag we can't read out. We set it when seamless DRRS is
enabled in pipe_config, so intel_dump_pipe_config() and
intel_pipe_config_compare() will continue to do the right thing when
has_drrs is set on the real state.
This removes one more dereference of crtc->config.
While at it, fixup the comment and also read out M2_N2 for CHV, since
we program it in the set_m_n function.
Changes since v1:
- Only read out M2/N2 on platforms that support DRRS.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181015094023.6211-1-maarten.lankhorst@linux.intel.com
Another user of crtc->config gone. The functions it calls also
needed crtc->config, so convert those as well.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Still pass m_n struct to intel_pch_transcoder_set_m_n (Ville)]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011100457.8776-3-maarten.lankhorst@linux.intel.com
Disable master interrupt before reading level indications.
This will close a race where we get a level indication between
reading and disabling, generating an extra interrupt where we
could have avoided one.
Further, as the reading acts also as a post, replace the
write/post on the irq reset with the helper. On enabling side,
posting doesn't serve any purpose so it can also be replaced
with helper.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181015141440.21845-3-mika.kuoppala@linux.intel.com
All other master control register bits, except the enable,
are read only and they are level indications of the second
level interrupt status. Only touch enable bit and rectify
the comment.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181015141440.21845-2-mika.kuoppala@linux.intel.com
Disable master interrupt before reading level indications.
This will close a race where we get a level indication between
reading and disabling, generating an extra interrupt where we
could have avoided one.
Further, as the reading acts also as a post, replace the
write/post on the irq reset with the helper. On enabling side,
posting doesn't serve any purpose so it can also be replaced
with helper.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181015141440.21845-1-mika.kuoppala@linux.intel.com
[Why]
A loop inside of build_evenly_distributed_points function that traverse through
the array of points become an infinite loop when m_GammaUpdates does not
get assigned to any value.
[How]
In DMColor, clear m_gammaIsValid bit just before writting all Zeromem for
m_GammaUpdates, to prevent calling build_evenly_distributed_points
before m_GammaUpdates gets assigned to some value.
Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit b24413180f added
"SPDX-License-Identifier: GPL-2.0" to files which previously had no
license, change this to MIT for radeon matching the license text of the
other radeon files.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit b24413180f
'License cleanup: add SPDX GPL-2.0 license identifier to files with no license'
incorrectly added "SPDX-License-Identifier: GPL-2.0" to a file with MIT
license text. Change the SPDX identifier to match the license text.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
LSPCON chips can generate YCBCR outputs, if asked nicely :).
In order to generate YCBCR 4:2:0 outputs, a source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:2:0 in AVI infoframes
Whereas for YCBCR 4:4:4 outputs, the source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:4:4 in AVI infoframes
So for both 4:2:0 as well as 4:4:4 outputs, we are driving the
pipe for YCBCR 4:4:4 output, but AVI infoframe's color space
information indicates LSPCON FW to start scaling down from YCBCR
4:4:4 and generate YCBCR 4:2:0 output. As the scaling is done by
LSPCON device, we need not to reserve a scaler for 4:2:0 outputs.
V2: rebase
V3: Addressed review comments from Ville
- add enum crtc_output_format instead of bool ycbcr420
- use crtc_output_format=4:4:4 for modeset of LSPCON 4:2:0 output
cases in this way we will have YCBCR 4:4:4 framework ready (except
the ABI part)
V4: Added r-b from Maarten (for v3)
Addressed review comments from Ville:
- Do not add a non-atomic state variable to determine lspcon output.
Instead add bool in CRTC state to indicate lspcon based scaling.
V5: Addressed review comments from Ville:
- Change the state bool name from external scaling to something more
relavent.
- Keep the info and adjusted_mode structures const.
- use crtc_state instead of pipe_config.
- Push all the config change into lspcon_ycbcr420_config function.
V6: Rebase, small changes to accommodate changes in patch 2.
V7: Fixed checkpatch warnings for alignment
V8: Rebase
PS: Ignored following warnings to match the current formatting:
drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON
-:53: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#53: FILE: drivers/gpu/drm/i915/i915_reg.h:8721:
+#define TRANS_MSA_SAMPLING_444 (2<<1)
^
-:54: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#54: FILE: drivers/gpu/drm/i915/i915_reg.h:8722:
+#define TRANS_MSA_CLRSP_YCBCR (2<<3)
V9: Rebase
V10: Rebase
V11: Rebase
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-8-git-send-email-shashank.sharma@intel.com
Different LSPCON vendors specify their custom methods to pass
AVI infoframes to the LSPCON chip, so does Parade tech.
This patch adds functions to arrange and write AVI infoframes
into Parade LSPCON chips.
V2: rebase
V3: Added r-b from Maarten
V4: rebase
V5: rebase
V6: rebase
V7: Fixed checkpatch warnings for alignment
V8: Rebase
V9: Rebase
V10: Rebase
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-7-git-send-email-shashank.sharma@intel.com
LSPCON is a DP branch device, so LSPCON vendors define
specific methods to pass AVI infoframes to the the chip.
This patch adds:
- a generic wrapper function for writing AVI infoframes for
all LSPCON devices.
- a vendor specific function to wrire AVI infoframes into
MCA LSPCON devices.
V2: Rebase
V3: Added r-b from Maarten
V4: Rebase
V5: Rebase
V6: Rebase
V7: Fixed checkpatch warnings for alignment
V8: Rebase
V9: Added the retry logic, with 50ms incremental delays while
writing AVI IF
V10: Changed the return value check
V11: Fixed checkpatch warning
V12: Rebase
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-6-git-send-email-shashank.sharma@intel.com
In order to pass AVI infoframes to LSPCON devices, a source has to
write them in a vendor recommended method and location.
This patch series:
- adds generic LSPCON infoframe setup functions.
- registers these functions into existing AVI infoframe framework.
- triggers these functions from modeset sequence.
Next patches in the series will add vendor specific code.
V2: Added new parameter to align with new definition of
drm_hdmi_avi_infoframe_quant_range
V3: Added r-b from Maarten (for V2)
Added new parameter output_format in struct lspcon to accommodate
Ville's review comments on last patch of the series
V4: Addressed Ville's review comment
- Do not add output_format in LSPCON state, as its non-atomic. Add
this into CRTC state (added in a later patch).
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
V11: Accommodated rebasing changes in intel_git_port fptrs (set_infoframes and infoframe_enabled)
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-5-git-send-email-shashank.sharma@intel.com
Intel LSPCON chip is provided by 2 vendors:
- Megachips America (MCA)
- Parade technologies (Parade tech)
Its important to know the vendor of this chip, as the address to
write AVI infoframes is different for those two.
This patch reads the vendor OUI signature, and marks into LSPCON
encoder structure for future usages.
This patch also does a small re-arrangement of the code, by moving
lspcon mode change into probe function.
V2: Use dp->desc for OUI detection, dont add a helper for this
(Ville)
V3: Rebase, Added r-b from Maarten
V4: Rebase
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-4-git-send-email-shashank.sharma@intel.com
This patch adds support for YCBCR 4:4:4 CRTC output format.
To do this, this patch extends the existing YCBCR 4:2:0
framework by:
- Adding new parameter in for YCBCR 4:4:4 enum crtc_iutput_format.
- Adding case for YCBCR 4:4:4 in while setting AVI infoframes.
- Adding necessary checks in modeset sequence.
V3: Added this patch in the series
V4: Added r-b from Maarten (for v3)
Addressed review comment from Ville:
Do not use (config->output_format > CRTC_OUTPUT_RGB)
V5: Rebase
V6: Rebase and small change, to accommodate changes in patch 2
V7: Fixed checkpatch alignment warnings
V8: Rebase
V9: Rebase
V10: Rebase
V11: Addressed review comment from Ville
Missing output_format_str[INTEL_OUTPUT_FORMAT_YCBCR444]
Added Ville's R-B.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-3-git-send-email-shashank.sharma@intel.com
Currently, we are using a bool in CRTC state (state->ycbcr420),
to indicate modeset, that the output format is YCBCR 4:2:0. Now in
order to support other YCBCR formats, we will need more such flags.
This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the
CRTC output formats and then plugs it during the modeset.
V3: Added this patch in the series, to address review comments from
second patchset.
V4: Added r-b from Maarten (on v3)
Addressed review comments from Ville:
- Change the enum name to intel_output_format.
- Start the enum value (INVALID) from 0 instaed of 1.
- Set the crtc's output_format to RGB in encoder's compute_config.
V5: Broke previous patch 1 into two parts,
- first patch to add CRTC output format in general
- second patch (this one) to add YCBCR 4:2:0 output
format specifically.
- Use ARRAY_SIZE(format_str) for output format validity check (Ville)
V6: Added a separate function to calculate crtc_state->output_format, and
calling it from various get_config function (Fix CI build warning)
V7: Fixed checkpatch warnings for alignment
V8: Rebase
V9: Rebase
V10: Rebase
V11: Addressed review comments from Ville:
- Change check for CRTC output format from > ARRAY_SIZE to >= ARRAY_SIZE.
- Check for values < INTEL_OUTPUT_FORMAT_RGB is unnecessary.
- No need to get CRTC YCBCR config, for pre-BDW functions.
Added Ville's r-b.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-2-git-send-email-shashank.sharma@intel.com
This patch adds an enum "intel_output_format" to represent
the output format of a particular CRTC. This enum will be
used to produce a RGB/YCBCR4:4:4/YCBCR4:2:0 output format
during the atomic modeset calculations.
V5:
- Created this separate patch to introduce and init output_format.
- Initialize parameters of output_format_str respectively (Jani N).
- Call it intel_output_format than crtc_output_format(Ville).
- Set output format in pipe_config for every encoder (Ville).
- Get rid of extra DRM_DEBUG_KMS during get_pipe_config (Ville)
V6: Rebase
V7: Fixed alignment warnings (checkpatch)
V8: Another check[atch warning for alignment
V9: Rebase
V10: Rebase on top of DSI restructure
V11: Addressed review comment from Ville
- Set CRTC format for pre-HSW get_pipe_config() function too.
Added Ville's R-B
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-1-git-send-email-shashank.sharma@intel.com
Update Static Power Gate mode UVD status clear
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set VCPU busy after gate power during vcn Static Power Gate start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply new UMC enable for VNC Dynamic Power Gate mode
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove Sitatic Power Gate mode unused steps during vcn start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Static Power Gate mode Register XX check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move Static Power Gate mode mc resume after MPC control
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update Static Power Gate mode VCN global tiling
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update Static Power Gate mode VCN memory control
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply new UMC enable for VNC Dynamic Power Gate mode start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove Dynamic Power Gate mode unused steps during VCN start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Dynamic Power Gate mode Register XX check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update Dynamic Power Gate mode VCN global tiling registers
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update Dynamic Power Gate mode VCN memory control
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reduce unnecessary local variable.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ring write/read pointer check for VCN dynamic power gate mode
stop,to make sure that no job is left in ring before turn off DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update latest static power gate mode stop function for VCN
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update latest UVD_MPC register for VCN. Use defined
macro to replace value for readability.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new register offset/mask for VCN to support
latest VCN implementation.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY] dp debugfs file does not exist for eDP under
/sys/kernel/debug/dri/0/eDP-1. the root is phy debugfs
is created for dp connector only.
[HOW] for eDP connector, create phy debugfs too.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For sriov, when first run windows guest, then run linux guest, the gds
vmid0 size will be reset to 0 by windows guest. So if the value has been
reset to 0, then set the value to the default value in linux guest.
v2:
Fixed value instead of reading mmGDS_VMID0_SIZE.
v3:
Set the default value of the switch.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to make sure that we don't race between job completion and
timeout.
v2: put revert label after calling the handling manually
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup starting the timeout a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Give user some hints when the power profile setting is not supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correctly translate the power profile specified by user to workload
type accepted by SMU fw.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This message is currently marked as DRM_DEBUG_ATOMIC. I would like it
to be DRM_DEBUG_KMS since it is more KMS than atomic, and this will
also make the message appear in the CI logs, which may or may not help
us with some FIFO underrun bugs.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004231600.14101-7-paulo.r.zanoni@intel.com
We were writing to PLANE_BUF_CFG(pipe, plane_id) twice for every
platform, and we were even using different values on the gen10- planar
case. The first write is useless since it just gets replaced with the
next one, so kill it.
There's a lot to improve in the DDB code, but let's start by avoiding
the double write.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004231600.14101-6-paulo.r.zanoni@intel.com
The transition watermarks ask for Selected Result Blocks (the real
value), not Result Blocks (the integer value). Given how ceilings are
applied in both the non-transition and the transition watermarks
calculations, we can get away with assuming that Selected Result
Blocks is actually Result Blocks minus 1 without any rounding errors.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004231600.14101-5-paulo.r.zanoni@intel.com
The transition minimum is 14 blocks for gens 9 and 10, and 4 blocks
for gen 11. This minimum value is supposed to be added to the
configurable trans_amount. This matches both BSpec and additional
information provided by our HW engineers.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004231600.14101-3-paulo.r.zanoni@intel.com
Function intel_framebuffer_init() checks for the possibilities during
framebuffer creation (addfb ioctl time). It is missing the fact that
the indexed format is not supported with Yf tiling.
It is worth noticing that skl_plane_format_mod_supported() correctly
handles for the C8/Yf combination, but this function runs during
modeset time, so we only reject the combination later.
Ville recently proposed a new IGT test that only uses addfb to assert
supported formats, so that IGT was failing. Add the check so we get
green squares right from the start after Ville merges his test.
Also drive-by fix the missing /* fall through */ in the chunk we
modified by just turning it into a "break;" since IMHO breaks are
easier to read than fall-throughs.
BSpec: 18565
Testcase: igt/kms_addfb_basic/expected-formats (not merged yet)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180925001913.29460-1-paulo.r.zanoni@intel.com
We need extra load failure point to better test error path in
i915_driver_init_mmio.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011130008.24640-2-michal.wajdeczko@intel.com
In case of the error we missed to call i915_mmio_cleanup
that matches earlier call to i915_mmio_setup.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011130008.24640-1-michal.wajdeczko@intel.com
This new AML PCI ID uses the same gen graphics as Coffe Lake not a
Kaby Lake one like the other AMLs.
So to make it more explicit renaming INTEL_AML_GT2_IDS to
INTEL_AML_KBL_GT2_IDS and naming this id as INTEL_AML_CFL_GT2_IDS.
v2:
- missed add new AML macro to INTEL_CFL_IDS()
- added derivated platform initials to AML macros
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927010650.22731-1-jose.souza@intel.com
For mmap-exhaustion, we deliberately put the system under a large amount
of pressure to ensure that we are able to reap mmap-offsets from dead
objects. If background activity does that reaping for us, that defeats
the purpose of the test and in some cases will fail our sanity checks
(because of the fake activity we use to prevent the idle worker).
Fixes: 932cac10c8 ("drm/i915/selftests: Prevent background reaping of acti
ve objects")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011103748.18387-1-chris@chris-wilson.co.uk
Add a new list.h helper for doing bulk updates. Used by ttm.
- Fixes for display underflow on VI APUs at 4K with UVD running
- Endian fixes for powerplay on vega
- DC fixes for interlaced video
- Vega20 powerplay fixes
- RV/RV2/PCO powerplay fixes
- Fix for spurious ACPI events on HG laptops
- Fix a memory leak in DC on driver unload
- Fixes for manual fan control mode switching
- Suspend/resume robustness fixes
- Fix display handling on RV2
- VCN fixes for DPG on PCO
- Misc code cleanups and warning fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011014739.3117-1-alexander.deucher@amd.com
- Add Maxime to drm-misc maintainer group (Sean)
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sean Paul <sean@poorly.run>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlu+YzwACgkQlvcN/ahK
BwrmCwf/QIjDH5jqxt/QPYphNBEKTbAbLRZoN4QM7SZ+asyB+qUKmfrEvgy+dy+e
vNKgm/iYdQs9s/YsOjiMqu50C5ZOyqCvlmGsTVyB0Bssn7TDcgDauXKKd54h/FsC
c63IQzQtcslrUTk2aNrCdU3n4X8FcRP4dRG2u5RuHZuE1z97Rjf0YwWjuTavzOig
M3OWlRzvIpT5e2M6k5mjSkRGx7ezLfdwkjxBKhroe6hjgInx5qg8ZCbSHDMfMlSO
YXYHSStl7DiNAIesUaoA3p7tIrNH+KZ1XqzYqvILkvmze8cssRWeQZEgs+mxSxS8
NSqnoLs0BUWcsyhfowBJpETb8e+w0g==
=7V8f
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-10-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- Fix build failure without CONFIG_DRM_FBDEV_EMULATION (Arnd)
- Add Maxime to drm-misc maintainer group (Sean)
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010203951.GA229456@art_vandelay
In case memory resources for *bl_desc* were allocated, release
them before return.
Addresses-Coverity-ID: 1472021 ("Resource leak")
Fixes: 0d46690155 ("drm/nouveau/secboot/acr: Remove VLA usage")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Scrambling is required for supporting any mode over 340MHz. If it's not
supported, reject any modes that would require it.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When SCDC is supported, make sure that we configure the GPU and monitor
to the same parameters.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The register programmed by the clock method needs to contain a different
setting for the link speed as well as special divider settings.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
High pixel clocks are required to use a 40 TMDS divider instead of 10,
and even low ones may optionally use scrambling depending on device
support.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Per the documentation in drm_get_pci_dev(), this function is deprecated
and shouldn't be used anymore. As it turns out, we're going to need to
stop using drm_get_pci_dev() anyway in order to allow us to turn off the
card before full system shutdowns, otherwise we'll hit race conditions
with userspace while trying to tear down the card on shutdown.
So, start using drm_dev_get() and drm_dev_put(), and just turn our
load/unload callbacks into open coded init/fini() functions.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We forget to free drm in all instances of failure, and additionally also
forget to destroy the master client if the other client fails
initialization.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There's literally no difference between any of the backlight init
functions besides the backlight properties they set and the backlight
callbacks that they set, so move all of the duplicated backlight init
code out of there and into nouveau_backlight_init().
This gets rid of a lot of copy pasta!
Changes since v1:
- Some of the pre-refactor callbacks were storing nv_encoder in callback
data for the backlight devices that they registered, as opposed to
nouveau_drm. This got missed and caused some bugs that didn't
originally appear on my setup (NULL kernel derefs) for some reason.
So, fix this by finding the nouveau_encoder in
nouveau_backlight_init(), and using that as the callback data for all
gens instead even if they don't care about the encoder.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jeffery Miller <jmiller@neverware.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Still no functional changes.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
More consistent with the rest of the codebase, no functional changes
here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since we're about to use this in nouveau_backlight.c. Same thing as
DRM_WARN_ONCE, DRM_INFO_ONCE, etc...
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Remember, ida IDs start at 0, not 1!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
As mentioned in the previous commit, we currently prevent new modesets
on recently-removed MST connectors by returning no encoder from our
->best_encoder() callback once the MST port has disappeared. This is
wrong however, because it prevents legacy modesetting users from being
able to disable CRTCs on MST connectors after the connector's respective
topology has disappeared.
So, fix this by instead by just always returning a valid encoder.
Changes since v2:
- Remove usage of atomic MST helper for now, since that got replaced
with a much simpler solution
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-3-lyude@redhat.com
Move all entries between @first and including @last before @head.
This is useful for LRU lists where a whole block of entries should be
moved to the end of the list.
Used as a band aid in TTM, but better placed in the common list headers.
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move copy_array helpers to smu_helper.c and share between
vega12 and vega20.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c: In function 'amdgpu_ucode_init_bo':
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c:431:39: warning:
variable 'header' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/psp_v11_0.c: In function 'psp_v11_0_ring_stop':
drivers/gpu/drm/amd/amdgpu/psp_v11_0.c:309:19: warning:
variable 'ring' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c: In function 'destroy_queue_cpsch':
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c:1366:7: warning:
variable 'preempt_all_queues' set but not used [-Wunused-but-set-variable]
It never used since introduct in
commit 992839ad64 ("drm/amdkfd: Add static user-mode queues support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are several switch statements that are missing break statements.
Add missing breaks to handle any fall-throughs corner cases.
Detected by CoverityScan, CID#1457175 ("Missing break in switch")
Fixes: 18aafc59b1 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently we return NOTIFY_DONE for any event which we don't think is
ours. However, many laptops will send more then just an ATIF event and
will also send an ACPI_VIDEO_NOTIFY_PROBE event as well. Since we don't
check for this, we return NOTIFY_DONE which causes a keypress for the
ACPI event to be propogated to userspace. This is the equivalent of
someone pressing the display key on a laptop every time there's a
hotplug event.
So, check for ACPI_VIDEO_NOTIFY_PROBE events and suppress keypresses
from them.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sdma2.4 is only for iceland. For Vi, we don't maintain the
direct fw loading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the warning message:
"-1 is not supported on VI"
the -1 is the default fw load type, mean auto.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extract the function of fw loading out of powerplay.
Do fw loading between hw_init/resuem_phase1 and phase2
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to do some IPs earlier to deal with ordering issues
similar to how resume is split into two phases.
Will do fw loading via smu/psp between the two phases.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable clean is unnecessary.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. one is for create/free bo when init/fini
2. one is for fill the bo before fw loading
the ucode bo only need to be created when load driver
and free when driver unload.
when resume/reset, driver only need to re-fill the bo
if the bo is allocated in vram.
Suggested by Christian.
v2: Return error when bo create failed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix cg/pg unexpected set in hw init failed case.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. only call late_init when hw_init successful,
so check status.hw instand of status.valid in late_init.
2. set status.late_initialized true if late_init was not implemented.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
initialize gfx/sdma before dpm features enabled.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
initialize gfx/sdma before dpm features enabled.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For the vram_start is 0 case, the gart range will be from 0x0000FFFF00000000
to 0x0000FFFF1FFFFFFF, which will cause the engine hang.
So to avoid the hole, limit the max mc address to AMDGPU_GMC_HOLE_START.:wq
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix CPDMA hang in PRT mode, set CPF_INT_DMA in reg CP_MECx_F32_INT_DIS for Compute and set DISABLE_GFX_HALT_ON_UTCL1_ERROR in reg CP_DEBUG for GFX
Affected ASICs: Vega10 Vega12 Raven
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Tested-by: Yukun.Li <yukun1.li@amd.com>
Tested-by: Maciej.Jesionowski <maciej.jesionowski@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add CP_DEBUG register definition.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RV2 resource is limit to 3 pipes. Limitation should apply to all HW
blocks instead of front pipe.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Wrong index for pstate debug test register
[How]
Add correct index value for dcn1_01 in hubbub1_construct()
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It appears when testing my previous fix for some of the legacy
modesetting issues with MST, I misattributed some kernel splats that
started appearing on my machine after a rebase as being from upstream.
But it appears they actually came from my patch series:
[ 2.980512] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
[ 2.980516] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] is not registered
[ 2.980516] ------------[ cut here ]------------
[ 2.980519] Could not determine valid watermarks for inherited state
[ 2.980553] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
[ 2.980556] Modules linked in: i915(O+) i2c_algo_bit drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops drm(O) intel_rapl x86_pkg_temp_thermal iTCO_wdt wmi_bmof coretemp crc32_pclmul psmouse i2c_i801 mei_me mei i2c_core lpc_ich mfd_core tpm_tis tpm_tis_core wmi tpm thinkpad_acpi pcc_cpufreq video ehci_pci crc32c_intel serio_raw ehci_hcd xhci_pci xhci_hcd
[ 2.980577] CPU: 3 PID: 551 Comm: systemd-udevd Tainted: G O 4.19.0-rc7Lyude-Test+ #1
[ 2.980579] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET63WW (1.27 ) 11/10/2016
[ 2.980605] RIP: 0010:intel_modeset_init+0x14d7/0x19f0 [i915]
[ 2.980607] Code: 89 df e8 ec 27 02 00 e9 24 f2 ff ff be 03 00 00 00 48 89 df e8 da 27 02 00 e9 26 f2 ff ff 48 c7 c7 c8 d1 34 a0 e8 23 cf dc e0 <0f> 0b e9 7c fd ff ff f6 c4 04 0f 85 37 f7 ff ff 48 8b 83 60 08 00
[ 2.980611] RSP: 0018:ffffc90000287988 EFLAGS: 00010282
[ 2.980614] RAX: 0000000000000000 RBX: ffff88031b488000 RCX: 0000000000000006
[ 2.980617] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff880321ad54d0
[ 2.980620] RBP: ffffc90000287a10 R08: 000000000000040a R09: 0000000000000065
[ 2.980623] R10: ffff88030ebb8f00 R11: ffffffff81416590 R12: ffff88031b488000
[ 2.980626] R13: ffff88031b4883a0 R14: ffffc900002879a8 R15: ffff880319099800
[ 2.980630] FS: 00007f475620d180(0000) GS:ffff880321ac0000(0000) knlGS:0000000000000000
[ 2.980633] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.980636] CR2: 00007f9ef28018a0 CR3: 000000031b72c001 CR4: 00000000003606e0
[ 2.980639] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.980642] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2.980645] Call Trace:
[ 2.980675] i915_driver_load+0xb0e/0xdc0 [i915]
[ 2.980681] ? kernfs_add_one+0xe7/0x130
[ 2.980709] i915_pci_probe+0x46/0x60 [i915]
[ 2.980715] pci_device_probe+0xd4/0x150
[ 2.980719] really_probe+0x243/0x3b0
[ 2.980722] driver_probe_device+0xba/0x100
[ 2.980726] __driver_attach+0xe4/0x110
[ 2.980729] ? driver_probe_device+0x100/0x100
[ 2.980733] bus_for_each_dev+0x74/0xb0
[ 2.980736] driver_attach+0x1e/0x20
[ 2.980739] bus_add_driver+0x159/0x230
[ 2.980743] ? 0xffffffffa0393000
[ 2.980746] driver_register+0x70/0xc0
[ 2.980749] ? 0xffffffffa0393000
[ 2.980753] __pci_register_driver+0x57/0x60
[ 2.980780] i915_init+0x55/0x58 [i915]
[ 2.980785] do_one_initcall+0x4a/0x1c4
[ 2.980789] ? do_init_module+0x27/0x210
[ 2.980793] ? kmem_cache_alloc_trace+0x131/0x190
[ 2.980797] do_init_module+0x60/0x210
[ 2.980800] load_module+0x2063/0x22e0
[ 2.980804] ? vfs_read+0x116/0x140
[ 2.980807] ? vfs_read+0x116/0x140
[ 2.980811] __do_sys_finit_module+0xbd/0x120
[ 2.980814] ? __do_sys_finit_module+0xbd/0x120
[ 2.980818] __x64_sys_finit_module+0x1a/0x20
[ 2.980821] do_syscall_64+0x5a/0x110
[ 2.980824] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 2.980826] RIP: 0033:0x7f4754e32879
[ 2.980828] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f7 45 2c 00 f7 d8 64 89 01 48
[ 2.980831] RSP: 002b:00007fff43fd97d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 2.980834] RAX: ffffffffffffffda RBX: 0000559a44ca64f0 RCX: 00007f4754e32879
[ 2.980836] RDX: 0000000000000000 RSI: 00007f475599f4cd RDI: 0000000000000018
[ 2.980838] RBP: 00007f475599f4cd R08: 0000000000000000 R09: 0000000000000000
[ 2.980839] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000000000
[ 2.980841] R13: 0000559a44c92fd0 R14: 0000000000020000 R15: 0000000000000000
[ 2.980881] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
[ 2.980884] ---[ end trace 5eb47a76277d4731 ]---
The cause of this appears to be due to the fact that if there's
pre-existing display state that was set by the BIOS when i915 loads, it
will attempt to perform a modeset before the driver is registered with
userspace. Since this happens before the driver's registered with
userspace, it's connectors are also unregistered and thus-states which
would turn on DPMS on a connector end up getting rejected since the
connector isn't registered.
These bugs managed to get past Intel's CI partially due to the fact it
never ran a full test on my patches for some reason, but also because
all of the tests unload the GPU once before running. Since this bug is
only really triggered when the drivers tries to perform a modeset before
it's been fully registered with userspace when coming from whatever
display configuration the firmware left us with, it likely would never
have been picked up by CI in the first place.
After some discussion with vsyrjala, we decided the best course of
action would be to just move the unregistered connector checks out of
update_connector_routing() and into drm_atomic_set_crtc_for_connector().
The reason for this being that legacy modesetting isn't going to be
expecting failures anywhere (at least this is the case with X), so
ideally we want to ensure that any DPMS changes will still work even on
unregistered connectors. Instead, we now only reject new modesets which
would change the current CRTC assigned to an unregistered connector
unless no new CRTC is being assigned to replace the connector's previous
one.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 4d80273976 ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009204424.21462-1-lyude@redhat.com
Check we can handle a late display load failure where the final act of
registering the connector fails.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010123833.16797-1-chris@chris-wilson.co.uk
Now that we have intel_connector.c, move the connector specific
functions from intel_display.c there. Fix a few checkpatch complaints
while at it. No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010075205.7713-2-jani.nikula@intel.com
The common denominator here seems to be connector more than
modes. Prepare for moving more connector functions to the same place. No
functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010075205.7713-1-jani.nikula@intel.com
For a while we carried lvds connector specific data in the lvds
connector, but since commit 05c72e77cc ("drm/i915: Nuke the LVDS lid
notifier") we haven't needed it. Revert back to plain intel_connector.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009210916.19578-1-jani.nikula@intel.com
This time mostly further refinement of dpu1+a6xx for sdm845 and
beyond.. and hurray for more negative diffstat :-)
- Misc cleanups and fixes
- GPU preemption optimization
- a6xx perf improvements and clock fixes (ie. lets actually not run at
minimum clks)
- a6xx devfreq/DCVS
- Lots of code cleanup across dpu (Bruce, Jeykumar, Sean)
- Fixed a few crashes on startup relating to dsi (Sean)
- Add cursor support (Sravanthi, Sean)
- Properly free mdss irq on destroy (Jordan)
- Use correct encoder_type when initializing, fixes crash on boot (Stephen)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsNevCzMiLuNW1EVN6gtP3JZSir6PfnWvnCavSZM+bUFQ@mail.gmail.com
This patch fixes the original commit c0cfb10d9e ("drm/i915/edp:
Do not do link training fallback or prune modes on EDP") that causes
a blank screen in case of certain eDP panels (Eg: seen on Dell XPS13 9350)
where first link training fails and a retraining is required by falling
back to lower link rate/lane count.
In case of some panels they advertise higher link rate/lane count
than whats required for supporting the panel's native mode.
But we always link train at highest link rate/lane count for eDP
and if that fails we can still fallback to lower link rate/lane count
as long as the fallback link BW still fits the native mode to avoid
pruning the panel's native mode yet retraining at fallback values
to recover from a blank screen.
v3:
* Add const for fixed_mode (Ville)
v2:
* Send uevent if link failure on eDP unconditionally
Fixes: c0cfb10d9e ("drm/i915/edp: Do not do link training fallback or prune modes on EDP")
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v4.17+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107489
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105338
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Alexander Wilson <alexander.wilson@ncf.edu>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009212804.702-1-manasi.d.navare@intel.com
initialize gfx/sdma before dpm features enabled.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx and sdma can be initialized before smu.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
with this interface, gfx/sdma can be initialized
before smu.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ucode bo is needed by request_smu_load_fw,
the request_smu_load_fw maybe called by gfx/sdma
before smu hw init.
so move amdgpu_ucode_bo_init to request_smu_lowd_fw
from smu hw init.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
driver don't release the ucode memory when suspend. so don't
need to allocate bo when resume back.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMDGPU_FW_LOAD_DIRECT is used for bring up.
Now it don't work any more. so remove the support.
v2: Add warning message if user select
AMDGPU_FW_LOAD_DIRECT/AMDGPU_FW_LOAD_PSP on VI.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct VCN cache window definition. The old one
is reused from UVD, and it is not fully correct.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace value with defined macro to make
code more readable
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use mmUVD_SCRATCH2 tracking decode write point.
It will help avoid dpg pause mode hang issue.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following WREG32_SOC15_DPG_MODE will overwrite register
mmUVD_CGC_CTRL. This code can be removed.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So a few days ago I started getting sprays of these warnings --
sorry, but because it was a few days ago I'm not sure what I was
running at the time (but it was probably either Stellaris or Chromium).
Sep 25 22:06:34 mutilate err: : [ 544.718905] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [ 544.718909] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [ 544.719710] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [ 544.719714] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [ 544.719862] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [ 544.719865] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [ 544.720772] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [ 544.720778] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate warning: : [ 544.721415] radeon 0000:01:00.0: vbo resource seems too big for the bo
followed by a massive stream of "vbo resource seems too big for the bo".
The most extreme flood ran from 23:01:58 to 23:02:47 and emitted 91,000
lines of log in that time. This... seems excessive, given that each log
message after the first contains more or less no information.
So ratelimit these messages. (We probably want to see at least *some* so
that the underlying bug can be fixed -- always assuming the bug isn't in
unfixable closed-source game code somewhere.)
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding a second irq source because of a different src_id is actually a
bug.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That also simplifies handling quite a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
