.. |
include
|
|
|
aks-cdu.dts
|
ARM: at91/dt: aks-cdu: define slow crytal frequency
|
2014-07-09 19:05:16 +02:00 |
am33xx-clocks.dtsi
|
ARM: dts: am33xx-clock: Fix ehrpwm tbclk data
|
2014-05-23 11:50:36 +03:00 |
am33xx.dtsi
|
ARM: dts: OMAP2+: Add sub mailboxes device node information
|
2014-09-11 11:46:30 -07:00 |
am35xx-clocks.dtsi
|
ARM: dts: omap3 clock data
|
2014-01-17 12:36:41 -08:00 |
am43x-epos-evm.dts
|
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
|
2014-08-08 17:39:48 -07:00 |
am43xx-clocks.dtsi
|
Merge branch 'for-v3.16/clk-dt' of https://github.com/t-kristo/linux-pm into omap-for-v3.16/dt-v2
|
2014-05-28 10:14:48 -07:00 |
am335x-base0033.dts
|
ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
|
2013-11-26 15:03:38 -08:00 |
am335x-bone-common.dtsi
|
ARM: dts: am335x-boneblack: Add names for remaining regulators
|
2014-09-08 17:19:13 -07:00 |
am335x-bone.dts
|
ARM: dts: AM33XX: Add AES data and documentation
|
2013-10-11 21:06:40 +02:00 |
am335x-boneblack.dts
|
ARM: dts: am335x-boneblack: remove use of ti,vcc-aux-disable-is-sleep
|
2014-05-05 17:37:13 -07:00 |
am335x-evm.dts
|
ARM: dts: am335x-evm: Enable the McASP FIFO for audio
|
2014-07-07 04:57:17 -07:00 |
am335x-evmsk.dts
|
arm: Xilinx Zynq dt patches for v3.17
|
2014-07-19 12:16:34 -07:00 |
am335x-igep0033.dtsi
|
ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA.
|
2014-07-07 05:01:18 -07:00 |
am335x-nano.dts
|
ARM: dts: AM33XX: fix ethernet and mdio default state
|
2014-05-14 14:45:15 -07:00 |
am335x-pepper.dts
|
ARM: dts: Add devicetree for Gumstix Pepper board
|
2014-07-09 04:34:19 -07:00 |
am437x-gp-evm.dts
|
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
|
2014-08-08 17:39:48 -07:00 |
am437x-sk-evm.dts
|
ARM: dts: add support for AM437x StarterKit
|
2014-07-01 05:47:35 -07:00 |
am3517_mt_ventoux.dts
|
|
|
am3517-craneboard.dts
|
ARM: dts: Add basic devices for AM3517-craneboard
|
2014-03-02 18:34:14 +01:00 |
am3517-evm.dts
|
ARM: dts: Add basic devices on am3517-evm
|
2013-12-08 14:15:46 -08:00 |
am3517.dtsi
|
ARM: dts: AM3517: Disable absent IPs inherited from OMAP3
|
2014-04-25 09:55:00 -07:00 |
am4372.dtsi
|
ARM: dts: OMAP2+: Add sub mailboxes device node information
|
2014-09-11 11:46:30 -07:00 |
animeo_ip.dts
|
ARM: at91/dt: animeo_ip: define crystals frequencies
|
2014-07-09 19:05:18 +02:00 |
armada-38x.dtsi
|
mvebu DT changes for v3.17 (round 2)
|
2014-07-20 12:23:56 -07:00 |
armada-370-db.dts
|
ARM: mvebu: Add proper pin muxing on the Armada 370 DB board
|
2014-08-17 18:40:38 +00:00 |
armada-370-mirabox.dts
|
ARM: mvebu: Add proper pin muxing on Globalscale Mirabox board
|
2014-08-17 18:40:28 +00:00 |
armada-370-netgear-rn102.dts
|
ARM: mvebu: Change vendor prefix for Intersil Corporation to isil
|
2014-09-09 16:02:03 +00:00 |
armada-370-netgear-rn104.dts
|
ARM: mvebu: Change vendor prefix for Intersil Corporation to isil
|
2014-09-09 16:02:03 +00:00 |
armada-370-rd.dts
|
ARM: mvebu: switch the Armada 370 RD board to internal registers at 0xf1000000
|
2014-09-17 15:00:59 +00:00 |
armada-370-xp.dtsi
|
ARM: mvebu: use improved armada spi device tree compatible name
|
2014-09-09 15:59:31 +00:00 |
armada-370.dtsi
|
ARM: mvebu: add SSCG to Armada 370 Device Tree
|
2014-09-09 15:40:03 +00:00 |
armada-375-db.dts
|
mvebu DT changes for v3.17 (round 2)
|
2014-07-20 12:23:56 -07:00 |
armada-375.dtsi
|
ARM: mvebu: Add RTC support for Armada 375
|
2014-08-17 18:37:07 +00:00 |
armada-380.dtsi
|
ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard
|
2014-06-24 11:33:24 +00:00 |
armada-385-db.dts
|
mvebu fixes for v3.16
|
2014-06-25 20:26:30 +02:00 |
armada-385-rd.dts
|
ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard
|
2014-06-24 11:33:24 +00:00 |
armada-385.dtsi
|
ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard
|
2014-06-24 11:33:24 +00:00 |
armada-xp-axpwifiap.dts
|
ARM: mvebu: remove clock-frequency of serial port Device Tree nodes
|
2014-04-26 00:34:44 +00:00 |
armada-xp-db.dts
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
armada-xp-gp.dts
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
armada-xp-lenovo-ix4-300d.dts
|
ARM: mvebu: Add dts definition for Lenovo Iomega ix4-300d NAS
|
2014-07-28 13:59:41 +00:00 |
armada-xp-matrix.dts
|
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
|
2014-06-12 14:27:40 -07:00 |
armada-xp-mv78230.dtsi
|
ARM: mvebu: update Armada XP DT for dynamic frequency scaling
|
2014-07-16 12:54:13 +00:00 |
armada-xp-mv78260.dtsi
|
ARM: mvebu: update Armada XP DT for dynamic frequency scaling
|
2014-07-16 12:54:13 +00:00 |
armada-xp-mv78460.dtsi
|
ARM: mvebu: update Armada XP DT for dynamic frequency scaling
|
2014-07-16 12:54:13 +00:00 |
armada-xp-netgear-rn2120.dts
|
ARM: mvebu: Change vendor prefix for Intersil Corporation to isil
|
2014-09-09 16:02:03 +00:00 |
armada-xp-openblocks-ax3-4.dts
|
ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM size
|
2014-06-17 17:09:37 +02:00 |
armada-xp.dtsi
|
ARM: mvebu: update Armada XP DT for dynamic frequency scaling
|
2014-07-16 12:54:13 +00:00 |
armv7-m.dtsi
|
ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs
|
2013-12-16 17:51:34 +01:00 |
at91-ariag25.dts
|
ARM: at91/dt: ariag25: define crystals frequencies
|
2014-07-09 19:05:10 +02:00 |
at91-cosino_mega2560.dts
|
ARM: at91/dt: at91-cosino_mega2560 remove useless tsadcc node
|
2014-05-07 18:28:41 +02:00 |
at91-cosino.dtsi
|
ARM: at91/dt: cosino define crystals frequencies
|
2014-07-09 19:05:20 +02:00 |
at91-foxg20.dts
|
ARM: at91/dt: foxg20: define crystals frequencies
|
2014-07-09 19:05:14 +02:00 |
at91-qil_a9260.dts
|
ARM: at91/dt: qil_a9260: define crystals frequencies
|
2014-07-09 19:05:15 +02:00 |
at91-sama5d3_xplained.dts
|
ARM: at91/dt: sama5d3 crystals under the clocks node
|
2014-07-09 18:02:45 +02:00 |
at91rm9200_pqfp.dtsi
|
ARM: at91/dt: add at91rm9200 PQFP package version
|
2013-08-21 12:18:52 +02:00 |
at91rm9200.dtsi
|
ARM: at91/dt: rm9200: define clocks
|
2014-07-09 19:05:11 +02:00 |
at91rm9200ek.dts
|
ARM: at91/dt: at91rm9200ek: define crystals frequencies
|
2014-07-09 19:05:12 +02:00 |
at91sam9g15.dtsi
|
|
|
at91sam9g15ek.dts
|
|
|
at91sam9g20.dtsi
|
ARM: at91/dt: at91sam9g20: switch ssc compatible string
|
2014-09-18 16:53:28 +02:00 |
at91sam9g20ek_2mmc.dts
|
|
|
at91sam9g20ek_common.dtsi
|
ARM: at91/dt: at91sam9g20ek: define crystals frequencies
|
2014-07-09 19:05:14 +02:00 |
at91sam9g20ek.dts
|
|
|
at91sam9g25.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
at91sam9g25ek.dts
|
|
|
at91sam9g35.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
at91sam9g35ek.dts
|
|
|
at91sam9g45.dtsi
|
ARM: at91/dt: at91sam9m10g45ek add rtc node
|
2014-09-18 18:14:48 +02:00 |
at91sam9m10g45ek.dts
|
ARM: at91/dt: at91sam9m10g45ek add rtc node
|
2014-09-18 18:14:48 +02:00 |
at91sam9n12.dtsi
|
AT91 ramc and reset/poweroff related DT patches
|
2014-08-19 16:04:10 -05:00 |
at91sam9n12ek.dts
|
ARM: at91/dt: sam9n12ek: ohci: add port and vbus property
|
2014-09-01 11:50:33 +02:00 |
at91sam9rl.dtsi
|
ARM: at91/dt: at91sam9rl: switch ssc compatible string
|
2014-09-18 16:53:12 +02:00 |
at91sam9rlek.dts
|
ARM: at91/dt: sam9rl crystals under the clocks node
|
2014-07-09 18:02:44 +02:00 |
at91sam9x5_can.dtsi
|
ARM: at91/dt: define sam9x5 clocks
|
2014-05-22 18:03:13 +02:00 |
at91sam9x5_isi.dtsi
|
ARM: at91/dt: define sam9x5 clocks
|
2014-05-22 18:03:13 +02:00 |
at91sam9x5_lcd.dtsi
|
ARM: at91/dt: define sam9x5 clocks
|
2014-05-22 18:03:13 +02:00 |
at91sam9x5_macb0.dtsi
|
ARM: at91/dt: define sam9x5 clocks
|
2014-05-22 18:03:13 +02:00 |
at91sam9x5_macb1.dtsi
|
ARM: at91/dt: define sam9x5 clocks
|
2014-05-22 18:03:13 +02:00 |
at91sam9x5_usart3.dtsi
|
ARM: at91/dt: define sam9x5 clocks
|
2014-05-22 18:03:13 +02:00 |
at91sam9x5.dtsi
|
ARM: at91/dt: sam9x5: fix ADC compatible string
|
2014-09-01 11:39:20 +02:00 |
at91sam9x5cm.dtsi
|
ARM: at91/dt: sam9x5 crystals under the clocks node
|
2014-07-09 18:02:44 +02:00 |
at91sam9x5ek.dtsi
|
ARM: SoC DT updates for 3.12
|
2013-09-06 13:26:27 -07:00 |
at91sam9x25.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
at91sam9x25ek.dts
|
|
|
at91sam9x35.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
at91sam9x35ek.dts
|
|
|
at91sam9260.dtsi
|
ARM: at91/dt: sam9260: define clocks
|
2014-07-09 19:05:13 +02:00 |
at91sam9261.dtsi
|
ARM: at91/dt: sam9261 crystals under the clocks node
|
2014-07-09 18:02:43 +02:00 |
at91sam9261ek.dts
|
ARM: at91/dt: sam9261 crystals under the clocks node
|
2014-07-09 18:02:43 +02:00 |
at91sam9263.dtsi
|
AT91 ramc and reset/poweroff related DT patches
|
2014-08-19 16:04:10 -05:00 |
at91sam9263ek.dts
|
ARM: at91/dt: sam9263ek: define crystals frequencies
|
2014-07-09 19:05:22 +02:00 |
atlas6-evb.dts
|
|
|
atlas6.dtsi
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
axm55xx.dtsi
|
ARM: dts: axxia: Add reset controller
|
2014-05-23 18:18:46 +02:00 |
axm5516-amarillo.dts
|
ARM: dts: Device tree for AXM55xx.
|
2014-05-23 18:18:45 +02:00 |
axm5516-cpus.dtsi
|
ARM: dts: Device tree for AXM55xx.
|
2014-05-23 18:18:45 +02:00 |
bcm2835-rpi-b.dts
|
ARM: bcm2835: add I2S pinctrl to device tree
|
2014-09-25 23:25:30 +02:00 |
bcm2835.dtsi
|
ARM: bcm2835: add I2S pinctrl to device tree
|
2014-09-25 23:25:30 +02:00 |
bcm4708-netgear-r6250.dts
|
ARM: BCM5301X: add dts files for BCM4708 SoC
|
2014-02-19 09:15:59 -05:00 |
bcm4708.dtsi
|
ARM: BCM5301X: add dts files for BCM4708 SoC
|
2014-02-19 09:15:59 -05:00 |
bcm5301x.dtsi
|
ARM: BCM5301X: add dts files for BCM4708 SoC
|
2014-02-19 09:15:59 -05:00 |
bcm7445-bcm97445svmb.dts
|
ARM: brcmstb: dts: add a reference DTS for Broadcom 7445
|
2014-07-28 10:01:46 -04:00 |
bcm7445.dtsi
|
ARM: brcmstb: dts: add a reference DTS for Broadcom 7445
|
2014-07-28 10:01:46 -04:00 |
bcm11351.dtsi
|
ARM: dts: enable SMP support for bcm28155
|
2014-07-28 09:41:44 -04:00 |
bcm21664-garnet.dts
|
ARM: dts: bcm21664: Add device tree files.
|
2014-03-14 12:22:37 -04:00 |
bcm21664.dtsi
|
ARM: dts: enable SMP support for bcm21664
|
2014-07-28 09:41:54 -04:00 |
bcm28155-ap.dts
|
ARM: dts: Enable the PWM for bcm28155 AP board
|
2014-04-28 11:14:47 -04:00 |
bcm59056.dtsi
|
ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators
|
2014-05-23 08:07:01 -04:00 |
berlin2-sony-nsz-gs7.dts
|
ARM: add Armada 1500 and Sony NSZ-GS7 device tree files
|
2013-12-13 16:31:05 +01:00 |
berlin2.dtsi
|
ARM: dts: berlin: add SMP related nodes and properties for BG2
|
2014-06-16 13:17:53 +02:00 |
berlin2cd-google-chromecast.dts
|
ARM: add Armada 1500-mini and Chromecast device tree files
|
2013-12-13 16:31:06 +01:00 |
berlin2cd.dtsi
|
ARM: dts: berlin: add the pinctrl node and muxing setup for uarts
|
2014-05-19 23:02:31 +02:00 |
berlin2q-marvell-dmp.dts
|
ARM: dts: berlin: enable i2c0 and i2c2
|
2014-06-16 13:17:36 +02:00 |
berlin2q.dtsi
|
ARM: dts: berlin: add SMP related nodes and properties for BG2Q
|
2014-06-16 13:17:53 +02:00 |
cros-adc-thermistors.dtsi
|
ARM: dts: Add thermistor dts fragment used by exynos based Peach boards
|
2014-09-14 00:46:56 +09:00 |
cros-ec-keyboard.dtsi
|
ARM: dts: Create a cros-ec-keyboard fragment
|
2014-06-16 12:11:31 -06:00 |
da850-enbw-cmc.dts
|
|
|
da850-evm.dts
|
ARM: DTS: da850-evm: Enable audio via simple-card
|
2014-08-26 15:34:44 +05:30 |
da850.dtsi
|
ARM: DTS: da850: Add node for McASP
|
2014-08-26 15:34:43 +05:30 |
dove-cm-a510.dts
|
ARM: dove: use preprocessor on device tree files
|
2013-09-30 15:00:35 +00:00 |
dove-cubox-es.dts
|
ARM: dts: mvebu: split SolidRun CuBox into variants
|
2014-06-20 23:46:25 +00:00 |
dove-cubox.dts
|
ARM: dts: mvebu: split SolidRun CuBox into variants
|
2014-06-20 23:46:25 +00:00 |
dove-d2plug.dts
|
ARM: dove: use preprocessor on device tree files
|
2013-09-30 15:00:35 +00:00 |
dove-d3plug.dts
|
ARM: dove: add initial DT file for Globalscale D3Plug
|
2013-09-30 15:00:54 +00:00 |
dove-dove-db.dts
|
ARM: dove: use preprocessor on device tree files
|
2013-09-30 15:00:35 +00:00 |
dove.dtsi
|
ARM: dts: dove: add DT LCD controllers
|
2014-07-25 00:07:22 +00:00 |
dra7-evm.dts
|
ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable
|
2014-09-09 08:33:29 -05:00 |
dra7.dtsi
|
Merge branch 'pull/v3.18/for-dt-pinctrl-updates' of https://github.com/nmenon/linux-2.6-playground into omap-for-v3.18/dt
|
2014-09-09 19:28:41 -07:00 |
dra7xx-clocks.dtsi
|
arm: Xilinx Zynq dt patches for v3.17
|
2014-07-19 12:16:34 -07:00 |
dra72-evm.dts
|
ARM: dts: dra72-evm: Add tps65917 PMIC node
|
2014-09-08 16:11:40 -07:00 |
dra72x.dtsi
|
ARM: dts: DRA7: Add PMU nodes
|
2014-09-18 09:58:10 -07:00 |
dra74x.dtsi
|
ARM: dts: DRA7: Add PMU nodes
|
2014-09-18 09:58:10 -07:00 |
ea3250.dts
|
|
|
ecx-2000.dts
|
ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
|
2013-11-04 17:01:05 -06:00 |
ecx-common.dtsi
|
EDAC updates for 3.13
|
2013-11-18 14:50:17 -08:00 |
efm32gg-dk3750.dts
|
ARM: efm32: properly namespace i2c location property
|
2014-03-14 16:04:30 +01:00 |
efm32gg.dtsi
|
ARM: efm32: fix unit address part in USART2 device nodes' names
|
2014-03-14 16:04:15 +01:00 |
elpida_ecb240abacn.dtsi
|
|
|
emev2-kzm9d.dts
|
ARM: shmobile: emev2: Use interrupt macros in DT files
|
2013-12-10 17:27:20 +09:00 |
emev2.dtsi
|
ARM: shmobile: Update EMEV2 DTS to include CPU frequency
|
2014-06-17 17:27:54 +09:00 |
ethernut5.dts
|
ARM: at91/dt: ethernut5: define crystals frequencies
|
2014-07-09 19:05:17 +02:00 |
evk-pro3.dts
|
ARM: at91/dt: evk-pro3: define slow crytal frequency
|
2014-07-09 19:05:17 +02:00 |
exynos4.dtsi
|
ARM: SoC device-tree changes for 3.17
|
2014-08-08 11:16:58 -07:00 |
exynos4x12-pinctrl.dtsi
|
|
|
exynos4x12.dtsi
|
ARM: SoC device-tree changes for 3.17
|
2014-08-08 11:16:58 -07:00 |
exynos5.dtsi
|
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
|
2014-08-07 17:36:12 -07:00 |
exynos3250-pinctrl.dtsi
|
ARM: dts: add dts files for exynos3250 SoC
|
2014-05-31 02:09:17 +09:00 |
exynos3250.dtsi
|
ARM: SoC device-tree changes for 3.17
|
2014-08-08 11:16:58 -07:00 |
exynos4210-origen.dts
|
ARM: dts: use key code macros on Origen and Arndale boards
|
2014-05-31 02:06:51 +09:00 |
exynos4210-pinctrl.dtsi
|
|
|
exynos4210-smdkv310.dts
|
ARM: dts: fix the chip select gpios definition in the SPI nodes
|
2014-07-17 19:37:50 +01:00 |
exynos4210-trats.dts
|
ARM: dts: Enable USB gadget functionality for exynos4210-trats
|
2014-05-23 02:34:11 +09:00 |
exynos4210-universal_c210.dts
|
ARM: dts: add external sd card node for exynos4210-universal_c210
|
2014-05-23 02:34:14 +09:00 |
exynos4210.dtsi
|
ARM: SoC device-tree changes for 3.17
|
2014-08-08 11:16:58 -07:00 |
exynos4212.dtsi
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos4412-odroid-common.dtsi
|
ARM: dts: ODROID i2c improvements
|
2014-08-19 14:12:30 -07:00 |
exynos4412-odroidu3.dts
|
ARM: dts: Add sound nodes for Odroid-X2/U3 boards
|
2014-07-16 03:16:44 +09:00 |
exynos4412-odroidx2.dts
|
ARM: dts: Add sound nodes for Odroid-X2/U3 boards
|
2014-07-16 03:16:44 +09:00 |
exynos4412-odroidx.dts
|
ARM: dts: add support for GPIO buttons for exynos4412-odroid
|
2014-07-16 02:54:07 +09:00 |
exynos4412-origen.dts
|
ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos
|
2014-08-18 14:07:57 -05:00 |
exynos4412-smdk4412.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos4412-tiny4412.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos4412-trats2.dts
|
ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos
|
2014-08-18 14:07:57 -05:00 |
exynos4412.dtsi
|
ARM: dts: clean up arm-pmu node for exynos4
|
2014-07-19 03:11:48 +09:00 |
exynos5250-arndale.dts
|
ARM: dts: remove old USB2 PHY node hook for exynos5250-arndale
|
2014-09-14 10:11:06 +09:00 |
exynos5250-pinctrl.dtsi
|
ARM: dts: Add pwmX_out pinctrl nodes to exynos5250
|
2014-05-19 23:14:02 +09:00 |
exynos5250-smdk5250.dts
|
ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos
|
2014-08-18 14:07:57 -05:00 |
exynos5250-snow.dts
|
ARM: dts: update display related nodes for exynos5250-snow
|
2014-09-14 02:16:35 +09:00 |
exynos5250.dtsi
|
ARM: dts: remove old USB2 PHY node for exynos5250
|
2014-09-14 10:11:20 +09:00 |
exynos5260-pinctrl.dtsi
|
ARM: dts: add dts files for exynos5260 SoC
|
2014-05-31 02:09:04 +09:00 |
exynos5260-xyref5260.dts
|
ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos
|
2014-08-18 14:07:57 -05:00 |
exynos5260.dtsi
|
ARM: SoC device-tree changes for 3.17
|
2014-08-08 11:16:58 -07:00 |
exynos5410-smdk5410.dts
|
ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos
|
2014-08-18 14:07:57 -05:00 |
exynos5410.dtsi
|
ARM: SoC device-tree changes for 3.17
|
2014-08-08 11:16:58 -07:00 |
exynos5420-arndale-octa.dts
|
ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos
|
2014-08-18 14:07:57 -05:00 |
exynos5420-peach-pit.dts
|
ARM: dts: update display related nodes for exynos5420-peach-pit
|
2014-09-14 02:20:18 +09:00 |
exynos5420-pinctrl.dtsi
|
ARM: dts: Add pwmX_out pinctrl nodes to exynos5420
|
2014-05-09 06:06:10 +09:00 |
exynos5420-smdk5420.dts
|
ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos
|
2014-08-18 14:07:57 -05:00 |
exynos5420.dtsi
|
ARM: dts: exynos5420: remove disp_pd
|
2014-08-09 08:25:50 -07:00 |
exynos5440-sd5v1.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos5440-ssdk5440.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos5440.dtsi
|
ARM: dts: SAMSUNG: Add aliases of UART nodes
|
2014-07-09 17:22:55 -07:00 |
exynos5800-peach-pi.dts
|
ARM: dts: update display related nodes for exynos5800-peach-pi
|
2014-09-14 09:22:45 +09:00 |
exynos5800.dtsi
|
ARM: dts: add mfc node for exynos5800
|
2014-05-31 02:09:17 +09:00 |
ge863-pro3.dtsi
|
ARM: at91/dt: ge863-pro3: define main crystal frequency
|
2014-07-09 19:05:16 +02:00 |
hi3620-hi4511.dts
|
ARM: dts: rename hi4511 dts file
|
2013-12-20 08:23:01 -08:00 |
hi3620.dtsi
|
ARM: SoC platform changes for 3.17
|
2014-08-08 11:14:29 -07:00 |
highbank.dts
|
ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
|
2013-11-04 17:01:05 -06:00 |
hisi-x5hd2-dkb.dts
|
Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt"
|
2014-09-26 14:17:26 +02:00 |
hisi-x5hd2.dtsi
|
Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt"
|
2014-09-26 14:17:26 +02:00 |
imx1-ads.dts
|
ARM: i.MX: dts: Add support for the Freescale i.MX1 ADS board
|
2014-09-16 10:25:55 +08:00 |
imx1-apf9328.dts
|
ARM: dts: Add support for the i.MX1 Armadeus APF9328 board
|
2014-09-16 10:25:59 +08:00 |
imx1-pinfunc.h
|
ARM: dts: i.MX1: Add i.MX1 template
|
2014-09-16 10:25:51 +08:00 |
imx1.dtsi
|
ARM: dts: i.MX1: Add i.MX1 template
|
2014-09-16 10:25:51 +08:00 |
imx6dl-aristainetos_4.dts
|
ARM: dts: imx6: add aristainetos board support
|
2014-07-18 16:49:38 +08:00 |
imx6dl-aristainetos_7.dts
|
ARM: dts: imx6: add aristainetos board support
|
2014-07-18 16:49:38 +08:00 |
imx6dl-cubox-i.dts
|
ARM: imx: initial SolidRun Cubox-i support
|
2014-01-27 14:21:01 +00:00 |
imx6dl-dfi-fs700-m60.dts
|
ARM: dts: imx6: Add DFI FS700-M60 board support
|
2014-02-10 16:27:40 +08:00 |
imx6dl-gw51xx.dts
|
ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types
|
2014-07-18 16:49:32 +08:00 |
imx6dl-gw52xx.dts
|
ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types
|
2014-07-18 16:49:32 +08:00 |
imx6dl-gw53xx.dts
|
ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types
|
2014-07-18 16:49:32 +08:00 |
imx6dl-gw54xx.dts
|
ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types
|
2014-07-18 16:49:32 +08:00 |
imx6dl-gw552x.dts
|
ARM: dts: Gateworks GW5520 support (i.MX6)
|
2014-09-16 10:25:56 +08:00 |
imx6dl-hummingboard.dts
|
ARM: dts: hummingboard: Split HummingBoard DT to support s/dl and d/q
|
2014-09-16 10:25:58 +08:00 |
imx6dl-nitrogen6x.dts
|
ARM: dts: imx: add nitrogen6x board
|
2014-02-09 21:29:32 +08:00 |
imx6dl-phytec-pbab01.dts
|
ARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo
|
2014-05-16 23:01:53 +08:00 |
imx6dl-phytec-pfla02.dtsi
|
ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo
|
2014-05-16 23:01:52 +08:00 |
imx6dl-pinfunc.h
|
ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ
|
2014-02-09 21:29:44 +08:00 |
imx6dl-rex-basic.dts
|
ARM: dts: add initial Rex Basic board support
|
2014-07-18 16:49:47 +08:00 |
imx6dl-riotboard.dts
|
ARM: dts: imx6: RIoTboard explicitly define pad settings
|
2014-07-18 16:49:46 +08:00 |
imx6dl-sabreauto.dts
|
ARM: dts: imx: share pad macro names between imx6q and imx6dl
|
2013-08-22 23:29:11 +08:00 |
imx6dl-sabrelite.dts
|
ARM: dts: imx: sabrelite: add Dual Lite/Solo support
|
2014-02-09 21:29:16 +08:00 |
imx6dl-sabresd.dts
|
ARM: dts: imx: share pad macro names between imx6q and imx6dl
|
2013-08-22 23:29:11 +08:00 |
imx6dl-tx6dl-comtft.dts
|
ARM: dts: imx6: add support for Ka-Ro TX6 modules
|
2014-07-18 16:49:35 +08:00 |
imx6dl-tx6u-801x.dts
|
ARM: dts: imx6: add support for Ka-Ro TX6 modules
|
2014-07-18 16:49:35 +08:00 |
imx6dl-tx6u-811x.dts
|
ARM: dts: imx6: add support for Ka-Ro TX6 modules
|
2014-07-18 16:49:35 +08:00 |
imx6dl-wandboard-revb1.dts
|
ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.
|
2014-07-18 16:49:45 +08:00 |
imx6dl-wandboard.dts
|
ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.
|
2014-07-18 16:49:45 +08:00 |
imx6dl.dtsi
|
ARM: dts: imx6qdl: use DT macro for clock ID
|
2014-07-18 16:49:38 +08:00 |
imx6q-arm2.dts
|
ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.
|
2014-02-10 16:27:27 +08:00 |
imx6q-cm-fx6.dts
|
ARM: dts: Add initial support for cm-fx6.
|
2014-02-09 21:28:55 +08:00 |
imx6q-cubox-i.dts
|
ARM: dts: cubox-i: disable spread-spectrum for Cubox-i eSATA
|
2014-07-18 16:49:40 +08:00 |
imx6q-dfi-fs700-m60.dts
|
ARM: dts: imx6: Add DFI FS700-M60 board support
|
2014-02-10 16:27:40 +08:00 |
imx6q-dmo-edmqmx6.dts
|
ARM: dts: imx6: edmqmx6: change enet reset pin
|
2014-08-18 14:42:14 +08:00 |
imx6q-gk802.dts
|
ARM: dts: Add stdout-path property to i.MX boards
|
2014-05-16 23:02:07 +08:00 |
imx6q-gw51xx.dts
|
ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types
|
2014-07-18 16:49:32 +08:00 |
imx6q-gw52xx.dts
|
ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types
|
2014-07-18 16:49:32 +08:00 |
imx6q-gw53xx.dts
|
ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types
|
2014-07-18 16:49:32 +08:00 |
imx6q-gw54xx.dts
|
ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types
|
2014-07-18 16:49:32 +08:00 |
imx6q-gw552x.dts
|
ARM: dts: Gateworks GW5520 support (i.MX6)
|
2014-09-16 10:25:56 +08:00 |
imx6q-gw5400-a.dts
|
ARM: dts: imx: ventana: cleanup pinctrl groups
|
2014-09-16 10:27:20 +08:00 |
imx6q-hummingboard.dts
|
ARM: dts: hummingboard: add mSATA support for iMX6 quad/dual HummingBoard
|
2014-09-16 10:25:58 +08:00 |
imx6q-nitrogen6x.dts
|
ARM: dts: imx: add nitrogen6x board
|
2014-02-09 21:29:32 +08:00 |
imx6q-phytec-pbab01.dts
|
ARM: dts: Add stdout-path property to i.MX boards
|
2014-05-16 23:02:07 +08:00 |
imx6q-phytec-pfla02.dtsi
|
ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo
|
2014-05-16 23:01:52 +08:00 |
imx6q-pinfunc.h
|
ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ
|
2014-02-09 21:29:44 +08:00 |
imx6q-rex-pro.dts
|
ARM: dts: add initial Rex Pro board support
|
2014-07-18 16:49:46 +08:00 |
imx6q-sabreauto.dts
|
ARM: dtsi: enable ahci sata on imx6q platforms
|
2013-08-22 23:29:25 +08:00 |
imx6q-sabrelite.dts
|
ARM: dts: imx: sabrelite: add Dual Lite/Solo support
|
2014-02-09 21:29:16 +08:00 |
imx6q-sabresd.dts
|
ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsi
|
2014-03-07 16:17:59 +00:00 |
imx6q-sbc6x.dts
|
ARM: dts: imx6qdl: make pinctrl nodes board specific
|
2014-02-09 21:28:56 +08:00 |
imx6q-tx6q-1010-comtft.dts
|
ARM: dts: imx6: add support for Ka-Ro TX6 modules
|
2014-07-18 16:49:35 +08:00 |
imx6q-tx6q-1010.dts
|
ARM: dts: imx6: add support for Ka-Ro TX6 modules
|
2014-07-18 16:49:35 +08:00 |
imx6q-tx6q-1020-comtft.dts
|
ARM: dts: imx6: add support for Ka-Ro TX6 modules
|
2014-07-18 16:49:35 +08:00 |
imx6q-tx6q-1020.dts
|
ARM: dts: imx6: add support for Ka-Ro TX6 modules
|
2014-07-18 16:49:35 +08:00 |
imx6q-tx6q-1110.dts
|
ARM: dts: imx6: add support for Ka-Ro TX6 modules
|
2014-07-18 16:49:35 +08:00 |
imx6q-udoo.dts
|
ARM: dts: imx6q-udoo: Add USB Host support
|
2014-07-18 16:49:34 +08:00 |
imx6q-wandboard-revb1.dts
|
ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.
|
2014-07-18 16:49:45 +08:00 |
imx6q-wandboard.dts
|
ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.
|
2014-07-18 16:49:45 +08:00 |
imx6q.dtsi
|
ARM: dts: imx6qdl: use DT macro for clock ID
|
2014-07-18 16:49:38 +08:00 |
imx6qdl-aristainetos.dtsi
|
ARM: dts: imx6: add aristainetos board support
|
2014-07-18 16:49:38 +08:00 |
imx6qdl-cubox-i.dtsi
|
ARM: dts: hummingboard/cubox-i: change SPDIF output to be more descriptive
|
2014-08-25 19:11:21 +08:00 |
imx6qdl-dfi-fs700-m60.dtsi
|
ARM: dts: Add stdout-path property to i.MX boards
|
2014-05-16 23:02:07 +08:00 |
imx6qdl-gw51xx.dtsi
|
ARM: dts: imx: ventana: cleanup pinctrl groups
|
2014-09-16 10:27:20 +08:00 |
imx6qdl-gw52xx.dtsi
|
ARM: dts: imx: ventana: add canbus support for GW52xx
|
2014-09-16 10:27:21 +08:00 |
imx6qdl-gw53xx.dtsi
|
ARM: dts: imx: ventana: cleanup pinctrl groups
|
2014-09-16 10:27:20 +08:00 |
imx6qdl-gw54xx.dtsi
|
ARM: dts: imx: ventana: cleanup pinctrl groups
|
2014-09-16 10:27:20 +08:00 |
imx6qdl-gw552x.dtsi
|
ARM: dts: Gateworks GW5520 support (i.MX6)
|
2014-09-16 10:25:56 +08:00 |
imx6qdl-hummingboard.dtsi
|
ARM: dts: hummingboard: fix configuration of IR input
|
2014-09-16 10:25:59 +08:00 |
imx6qdl-microsom-ar8035.dtsi
|
ARM: dts: microsom-ar8035: MDIO pad must be set open drain
|
2014-08-27 13:32:26 +08:00 |
imx6qdl-microsom.dtsi
|
ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level
|
2014-06-17 22:00:07 +08:00 |
imx6qdl-nitrogen6x.dtsi
|
ARM: dts: nitrogen6x: Add Intersil ISL1208 RTC
|
2014-09-16 10:25:57 +08:00 |
imx6qdl-phytec-pbab01.dtsi
|
ARM: dts: pbab01: Enable DVI
|
2014-05-16 23:01:56 +08:00 |
imx6qdl-phytec-pfla02.dtsi
|
devicetree: Dialog Semiconductor consolidate existing vendor prefixes to standardise on 'dlg'
|
2014-08-29 09:26:29 +01:00 |
imx6qdl-rex.dtsi
|
ARM: dts: add initial Rex Pro board support
|
2014-07-18 16:49:46 +08:00 |
imx6qdl-sabreauto.dtsi
|
ARM: dts: imx6qdl-sabreauto: Support debug LED
|
2014-02-20 09:38:07 +08:00 |
imx6qdl-sabrelite.dtsi
|
ARM: dts: imx: remove ssi fsl,mode for audio cards
|
2014-07-18 16:49:37 +08:00 |
imx6qdl-sabresd.dtsi
|
ARM: dts: imx6qdl-sabresd: Configure the pins locally
|
2014-09-16 10:26:04 +08:00 |
imx6qdl-tx6.dtsi
|
ARM: dts: mx6: Disable the keypad in the dtsi files
|
2014-07-18 16:49:40 +08:00 |
imx6qdl-wandboard-revb1.dtsi
|
ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.
|
2014-07-18 16:49:45 +08:00 |
imx6qdl-wandboard-revc1.dtsi
|
ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.
|
2014-07-18 16:49:45 +08:00 |
imx6qdl-wandboard.dtsi
|
ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.
|
2014-07-18 16:49:45 +08:00 |
imx6qdl.dtsi
|
ARM: dts: imx6: make gpt per clock can be from OSC
|
2014-09-16 10:27:32 +08:00 |
imx6sl-evk.dts
|
ARM: dts: imx6sl-evk: Fix display duplicate name warning
|
2014-09-16 10:26:02 +08:00 |
imx6sl-pinfunc.h
|
|
|
imx6sl.dtsi
|
ARM: dts: imx6sl: add baud clock and clock-names for ssi
|
2014-09-16 10:27:17 +08:00 |
imx6sx-pinfunc.h
|
ARM: dts: imx6sx: fix the pad setting for uart CTS_B
|
2014-08-19 20:06:59 +08:00 |
imx6sx-sdb.dts
|
ARM: dts: imx6x-sdb: Add LCD support
|
2014-09-16 10:26:01 +08:00 |
imx6sx.dtsi
|
ARM: dts: imx6: make gpt per clock can be from OSC
|
2014-09-16 10:27:32 +08:00 |
imx23-evk.dts
|
ARM: dts: imx23-evk: Fix display duplicate name warning
|
2014-09-16 10:26:01 +08:00 |
imx23-olinuxino.dts
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx23-pinfunc.h
|
ARM: dts: mxs: add pinctrl header files
|
2013-09-26 13:01:36 +08:00 |
imx23-stmp378x_devb.dts
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx23.dtsi
|
ARM: dts: mxs: add mxs phy controller id
|
2014-02-09 21:33:36 +08:00 |
imx25-eukrea-cpuimx25.dtsi
|
ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.
|
2014-02-09 21:33:21 +08:00 |
imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
|
ARM: dts: mbimxsd25: cmo-qvga: Fix lcd regulator
|
2014-07-18 16:49:37 +08:00 |
imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
|
ARM: dts: imx25: mbimxsd25: Add displays support.
|
2014-07-18 16:49:34 +08:00 |
imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
|
ARM: dts: imx25: mbimxsd25: Add displays support.
|
2014-07-18 16:49:34 +08:00 |
imx25-eukrea-mbimxsd25-baseboard.dts
|
ARM: dts: imx: remove ssi fsl,mode for audio cards
|
2014-07-18 16:49:37 +08:00 |
imx25-karo-tx25.dts
|
ARM: dts: Karo TX25: use hardware ecc
|
2014-05-16 23:02:11 +08:00 |
imx25-pdk.dts
|
ARM: dts: imx25-pdk: Add USB OTG support
|
2014-07-18 16:49:42 +08:00 |
imx25-pinfunc.h
|
ARM: dts: imx25-pinfunc: Add several pin configurations
|
2014-09-16 10:25:52 +08:00 |
imx25.dtsi
|
ARM: i.MX: dts: Add simple-card support
|
2014-09-16 10:25:55 +08:00 |
imx27-apf27.dts
|
ARM: dts: imx: add required #clock-cells for fixed-clock
|
2014-04-14 10:22:39 +08:00 |
imx27-apf27dev.dts
|
ARM: dts: apf27dev: add max1027 in the dts
|
2014-09-16 10:26:00 +08:00 |
imx27-eukrea-cpuimx27.dtsi
|
ARM: dts: Add support for the cpuimx27 board from Eukrea and its baseboard
|
2014-07-18 16:49:31 +08:00 |
imx27-eukrea-mbimxsd27-baseboard.dts
|
ARM: dts: imx: remove ssi fsl,mode for audio cards
|
2014-07-18 16:49:37 +08:00 |
imx27-pdk.dts
|
ARM: i.MX27 clk: dts: Use clock defines in DTS files
|
2014-07-18 16:49:44 +08:00 |
imx27-phytec-phycard-s-rdk.dts
|
ARM: dts: Add stdout-path property to i.MX boards
|
2014-05-16 23:02:07 +08:00 |
imx27-phytec-phycard-s-som.dtsi
|
ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi
|
2014-02-13 09:57:32 +08:00 |
imx27-phytec-phycore-rdk.dts
|
ARM: i.MX27 clk: dts: Use clock defines in DTS files
|
2014-07-18 16:49:44 +08:00 |
imx27-phytec-phycore-som.dtsi
|
ARM: i.MX27 clk: dts: Use clock defines in DTS files
|
2014-07-18 16:49:44 +08:00 |
imx27-pinfunc.h
|
pinctrl: i.MX27: Remove nonexistent pad definitions
|
2014-07-11 14:08:26 +02:00 |
imx27.dtsi
|
ARM: i.MX27 clk: dts: Use clock defines in DTS files
|
2014-07-18 16:49:44 +08:00 |
imx28-apf28.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers
|
2013-09-26 13:01:36 +08:00 |
imx28-apf28dev.dts
|
ARM: dts: imx28-apf28dev: Fix display duplicate name warning
|
2014-09-16 10:26:02 +08:00 |
imx28-apx4devkit.dts
|
ARM: dts: imx28-apx4devkit: Fix display duplicate name warning
|
2014-09-16 10:26:02 +08:00 |
imx28-cfa10036.dts
|
ARM: dt: imx28-cfa10036: introduce a regulator for mmc0
|
2014-07-18 16:49:32 +08:00 |
imx28-cfa10037.dts
|
ARM: i.MX28: dts: rename usbphy pin names
|
2014-02-09 21:33:22 +08:00 |
imx28-cfa10049.dts
|
ARM: dts: imx28-cfa100: Fix display duplicate name warning
|
2014-09-16 10:26:03 +08:00 |
imx28-cfa10055.dts
|
ARM: dts: imx28-cfa100: Fix display duplicate name warning
|
2014-09-16 10:26:03 +08:00 |
imx28-cfa10056.dts
|
ARM: dts: imx28-cfa100: Fix display duplicate name warning
|
2014-09-16 10:26:03 +08:00 |
imx28-cfa10057.dts
|
ARM: dts: imx28-cfa100: Fix display duplicate name warning
|
2014-09-16 10:26:03 +08:00 |
imx28-cfa10058.dts
|
ARM: dts: imx28-cfa100: Fix display duplicate name warning
|
2014-09-16 10:26:03 +08:00 |
imx28-duckbill.dts
|
ARM: dts: imx28-duckbill: use symbolic names from gpio.h
|
2014-05-16 23:01:48 +08:00 |
imx28-eukrea-mbmx28lc.dtsi
|
ARM: mxs: Add support for the eukrea-cpuimx28.
|
2014-02-09 21:33:20 +08:00 |
imx28-eukrea-mbmx283lc.dts
|
ARM: mxs: Add support for the eukrea-cpuimx28.
|
2014-02-09 21:33:20 +08:00 |
imx28-eukrea-mbmx287lc.dts
|
ARM: mxs: Add support for the eukrea-cpuimx28.
|
2014-02-09 21:33:20 +08:00 |
imx28-evk.dts
|
ARM: dts: imx28-evk: Fix display duplicate name warning
|
2014-09-16 10:26:01 +08:00 |
imx28-m28.dtsi
|
ARM: dts: mxs: Split M28EVK into SoM and EVK parts
|
2014-07-18 16:49:41 +08:00 |
imx28-m28cu3.dts
|
ARM: dts: imx28-m28cu: Fix display duplicate name warning
|
2014-09-16 10:26:03 +08:00 |
imx28-m28evk.dts
|
ARM: dts: imx28-m28evk: Fix display duplicate name warning
|
2014-09-16 10:26:04 +08:00 |
imx28-pinfunc.h
|
ARM: dts: mxs: add pinctrl header files
|
2013-09-26 13:01:36 +08:00 |
imx28-sps1.dts
|
ARM: i.MX28: dts: rename usbphy pin names
|
2014-02-09 21:33:22 +08:00 |
imx28-tx28.dts
|
ARM: dts: imx28-tx28: add alias for CAN XCVR regulator
|
2014-09-16 10:27:19 +08:00 |
imx28.dtsi
|
ARM: dts: imx28: add alternative pinmuxing for i2c1
|
2014-09-16 10:25:53 +08:00 |
imx31-bug.dts
|
|
|
imx31.dtsi
|
ARM: dts: imx: Add the missing cpus node
|
2013-08-22 23:29:01 +08:00 |
imx35-eukrea-cpuimx35.dtsi
|
ARM: dts: cpuimx35 Add touchscreen support.
|
2014-05-16 23:01:50 +08:00 |
imx35-eukrea-mbimxsd35-baseboard.dts
|
ARM: dts: imx: remove ssi fsl,mode for audio cards
|
2014-07-18 16:49:37 +08:00 |
imx35-pdk.dts
|
ARM: dts: imx35-pdk: Fix memory region description
|
2014-05-16 23:02:13 +08:00 |
imx35-pinfunc.h
|
|
|
imx35.dtsi
|
ARM: i.MX: dts: Add simple-card support
|
2014-09-16 10:25:55 +08:00 |
imx50-evk.dts
|
ARM: dts: imx: add device tree support for Freescale imx50evk board
|
2014-02-09 21:32:21 +08:00 |
imx50-pinfunc.h
|
ARM: dts: imx: add device tree pin definitions for the IMX50
|
2014-02-09 21:32:18 +08:00 |
imx50.dtsi
|
ARM: i.MX: dts: Add simple-card support
|
2014-09-16 10:25:55 +08:00 |
imx51-apf51.dts
|
ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions
|
2014-02-09 21:32:51 +08:00 |
imx51-apf51dev.dts
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
imx51-babbage.dts
|
ARM: dts: imx: remove ssi fsl,mode for audio cards
|
2014-07-18 16:49:37 +08:00 |
imx51-digi-connectcore-jsk.dts
|
ARM i.MX51: Add Digi ConnectCore devicetree
|
2014-05-16 23:01:51 +08:00 |
imx51-digi-connectcore-som.dtsi
|
ARM: dts: i.MX51: Allow to define partitions onto NFC
|
2014-05-16 23:01:56 +08:00 |
imx51-eukrea-cpuimx51.dtsi
|
ARM: dts: cpuimx51 Add touchscreen support.
|
2014-05-16 23:01:50 +08:00 |
imx51-eukrea-mbimxsd51-baseboard.dts
|
ARM: dts: imx: remove ssi fsl,mode for audio cards
|
2014-07-18 16:49:37 +08:00 |
imx51-pinfunc.h
|
|
|
imx51.dtsi
|
ARM: i.MX: dts: Add simple-card support
|
2014-09-16 10:25:55 +08:00 |
imx53-ard.dts
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx53-m53.dtsi
|
ARM: dts: mx5: Split M53EVK into SoM and EVK parts
|
2014-07-18 16:49:46 +08:00 |
imx53-m53evk.dts
|
ARM: dts: mx5: Split M53EVK into SoM and EVK parts
|
2014-07-18 16:49:46 +08:00 |
imx53-mba53.dts
|
ARM: dts: imx: remove ssi fsl,mode for audio cards
|
2014-07-18 16:49:37 +08:00 |
imx53-pinfunc.h
|
|
|
imx53-qsb-common.dtsi
|
ARM: dts: imx: remove ssi fsl,mode for audio cards
|
2014-07-18 16:49:37 +08:00 |
imx53-qsb.dts
|
ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi
|
2014-03-07 16:17:58 +00:00 |
imx53-qsrb.dts
|
ARM: dts: imx53-qsrb: Fix suspend/resume
|
2014-08-19 22:02:25 +08:00 |
imx53-smd.dts
|
devicetree: Dialog Semiconductor consolidate existing vendor prefixes to standardise on 'dlg'
|
2014-08-29 09:26:29 +01:00 |
imx53-tqma53.dtsi
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx53-tx53-x03x.dts
|
ARM: dts: imx53-tx53: add IPU DI ports and endpoints
|
2014-04-14 10:22:38 +08:00 |
imx53-tx53-x13x.dts
|
ARM: dts: imx53: add support for Ka-Ro TX53 modules
|
2014-02-09 21:33:48 +08:00 |
imx53-tx53.dtsi
|
ARM: dts: imx: remove ssi fsl,mode for audio cards
|
2014-07-18 16:49:37 +08:00 |
imx53-voipac-bsb.dts
|
ARM: dts: imx: remove ssi fsl,mode for audio cards
|
2014-07-18 16:49:37 +08:00 |
imx53-voipac-dmm-668.dtsi
|
ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module
|
2014-02-09 21:32:23 +08:00 |
imx53.dtsi
|
ARM: dts: i.MX53: add pmu node
|
2014-09-16 10:25:57 +08:00 |
integrator.dtsi
|
ARM: integrator: move EBI to the device tree
|
2013-12-04 16:22:31 +01:00 |
integratorap.dts
|
ARM: integrator: get rid of <mach/memory.h>
|
2014-06-27 10:15:22 +02:00 |
integratorcp.dts
|
ARM: integrator: define clocks in the device trees
|
2014-02-13 11:20:31 +01:00 |
k2e-clocks.dtsi
|
ARM: dts: keystone: fix bindings for pcie and usb clock nodes
|
2014-09-22 15:19:36 -04:00 |
k2e-evm.dts
|
ARM: dts: keystone-evm: add spi nor flash support
|
2014-05-12 11:43:59 -04:00 |
k2e.dtsi
|
ARM: dts: keystone-k2e: fix mdio io start address
|
2014-10-01 09:58:25 -04:00 |
k2hk-clocks.dtsi
|
ARM: dts: keystone: fix netcp's clocks definitions
|
2014-07-08 12:23:42 -04:00 |
k2hk-evm.dts
|
ARM: dts: keystone-evm: add 1g ethernet phys nodes
|
2014-07-17 13:29:06 -04:00 |
k2hk.dtsi
|
ARM: dts: keystone: add dsp gpio controllers nodes
|
2014-09-22 15:19:27 -04:00 |
k2l-clocks.dtsi
|
ARM: dts: keystone: fix netcp's clocks definitions
|
2014-07-08 12:23:42 -04:00 |
k2l-evm.dts
|
ARM: dts: keystone-evm: add spi nor flash support
|
2014-05-12 11:43:59 -04:00 |
k2l.dtsi
|
ARM: dts: keystone-k2l: fix mdio io start address
|
2014-10-01 09:59:33 -04:00 |
keystone-clocks.dtsi
|
ARM: dts: keystone: fix netcp's clocks definitions
|
2014-07-08 12:23:42 -04:00 |
keystone.dtsi
|
ARM: dts: keystone: fix io range for usb_phy0
|
2014-10-01 09:58:25 -04:00 |
kirkwood-98dx4122.dtsi
|
ARM: dts: kirkwood: resynch 98dx4122 dtsi
|
2014-05-16 17:56:51 +00:00 |
kirkwood-6192.dtsi
|
ARM: dts: kirkwood: consolidate common pinctrl settings
|
2014-05-05 00:52:28 +00:00 |
kirkwood-6281.dtsi
|
ARM: dts: kirkwood: consolidate common pinctrl settings
|
2014-05-05 00:52:28 +00:00 |
kirkwood-6282.dtsi
|
ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282
|
2014-05-05 00:53:24 +00:00 |
kirkwood-b3.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-cloudbox.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-d2net.dts
|
ARM: Kirkwood: add DT support for d2 Network v2
|
2014-07-13 21:29:56 +00:00 |
kirkwood-db-88f6281.dts
|
ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding
|
2013-10-01 16:28:03 +00:00 |
kirkwood-db-88f6282.dts
|
ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding
|
2013-10-01 16:28:03 +00:00 |
kirkwood-db.dtsi
|
ARM: dts: kirkwood: set default pinctrl for NAND
|
2014-05-05 00:53:06 +00:00 |
kirkwood-dns320.dts
|
ARM: dts: kirkwood: set default pinctrl for UART0/1
|
2014-05-05 00:52:45 +00:00 |
kirkwood-dns325.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-dnskw.dtsi
|
ARM: dts: kirkwood: set default pinctrl for NAND
|
2014-05-05 00:53:06 +00:00 |
kirkwood-dockstar.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-dreamplug.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-ds109.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds110jv10.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds111.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds112.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds209.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds210.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds212.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds212j.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds409.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds409slim.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds411.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds411j.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds411slim.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-goflexnet.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-guruplug-server-plus.dts
|
ARM: dts: kirkwood: fix phy-connection-type for Guruplug
|
2014-06-23 21:48:16 +00:00 |
kirkwood-ib62x0.dts
|
ARM: dts: kirkwood: set default pinctrl for NAND
|
2014-05-05 00:53:06 +00:00 |
kirkwood-iconnect.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-iomega_ix2_200.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-is2.dts
|
ARM: SoC board updates for 3.12
|
2013-09-06 13:34:43 -07:00 |
kirkwood-km_common.dtsi
|
ARM: dts: kirkwood: add kirkwood-km_common DTSI files
|
2014-05-16 17:57:19 +00:00 |
kirkwood-km_fixedeth.dts
|
ARM: dts: kirkwood: add kirkwood-km_fixedeth DTS file
|
2014-05-16 17:57:27 +00:00 |
kirkwood-km_kirkwood.dts
|
ARM: dts: kirkwood: add kirkwood-km_common DTSI files
|
2014-05-16 17:57:19 +00:00 |
kirkwood-laplug.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-lschlv2.dts
|
|
|
kirkwood-lsxhl.dts
|
|
|
kirkwood-lsxl.dtsi
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-mplcec4.dts
|
ARM: dts: kirkwood: set default pinctrl for NAND
|
2014-05-05 00:53:06 +00:00 |
kirkwood-mv88f6281gtw-ge.dts
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
kirkwood-net2big.dts
|
ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS
|
2014-07-13 21:22:49 +00:00 |
kirkwood-net5big.dts
|
ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS
|
2014-07-13 21:22:49 +00:00 |
kirkwood-netgear_readynas_duo_v2.dts
|
ARM: dts: kirkwood: set default pinctrl for UART0/1
|
2014-05-05 00:52:45 +00:00 |
kirkwood-netgear_readynas_nv+_v2.dts
|
ARM: dts: kirkwood: set default pinctrl for UART0/1
|
2014-05-05 00:52:45 +00:00 |
kirkwood-netxbig.dtsi
|
ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS
|
2014-07-13 21:22:49 +00:00 |
kirkwood-ns2-common.dtsi
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-ns2.dts
|
ARM: SoC board updates for 3.12
|
2013-09-06 13:34:43 -07:00 |
kirkwood-ns2lite.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-ns2max.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-ns2mini.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-nsa3x0-common.dtsi
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
kirkwood-nsa310.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-nsa310a.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-nsa320.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-openblocks_a6.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-openblocks_a7.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-openrd-base.dts
|
ARM: Kirkwood: DT versions of OpenRD boards
|
2014-05-16 05:20:38 +00:00 |
kirkwood-openrd-client.dts
|
ARM: Kirkwood: DT versions of OpenRD boards
|
2014-05-16 05:20:38 +00:00 |
kirkwood-openrd-ultimate.dts
|
ARM: Kirkwood: DT versions of OpenRD boards
|
2014-05-16 05:20:38 +00:00 |
kirkwood-openrd.dtsi
|
ARM: Kirkwood: DT versions of OpenRD boards
|
2014-05-16 05:20:38 +00:00 |
kirkwood-rd88f6192.dts
|
ARM: dts: kirkwood: set default pinctrl for SPI0
|
2014-05-05 00:52:55 +00:00 |
kirkwood-rd88f6281-a0.dts
|
ARM: Kirkwood: convert rd88f6281-setup.c to DT.
|
2014-02-17 03:01:25 +00:00 |
kirkwood-rd88f6281-a1.dts
|
ARM: Kirkwood: convert rd88f6281-setup.c to DT.
|
2014-02-17 03:01:25 +00:00 |
kirkwood-rd88f6281.dtsi
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-rs212.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-rs409.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-rs411.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-sheevaplug-common.dtsi
|
ARM: dts: kirkwood: set default pinctrl for NAND
|
2014-05-05 00:53:06 +00:00 |
kirkwood-sheevaplug-esata.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-sheevaplug.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-synology.dtsi
|
ARM: dts: kirkwood: set default pinctrl for I2C0
|
2014-05-05 00:53:15 +00:00 |
kirkwood-t5325.dts
|
ARM: Kirkwood: t5325: Use simple card to instantiate audio
|
2014-05-05 01:18:45 +00:00 |
kirkwood-topkick.dts
|
ARM: dts: kirkwood: set default pinctrl for I2C0
|
2014-05-05 00:53:15 +00:00 |
kirkwood-ts219-6281.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-ts219-6282.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-ts219.dtsi
|
ARM: dts: kirkwood: set default pinctrl for I2C0
|
2014-05-05 00:53:15 +00:00 |
kirkwood-ts419-6281.dts
|
ARM: Kirkwood: Add DT description of QNAP 419
|
2014-02-05 02:22:07 +00:00 |
kirkwood-ts419-6282.dts
|
ARM: Kirkwood: Add DT description of QNAP 419
|
2014-02-05 02:22:07 +00:00 |
kirkwood-ts419.dtsi
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood.dtsi
|
ARM: Kirkwood: DT: Add missing #sound-dai-cells property
|
2014-05-05 01:18:44 +00:00 |
kizbox.dts
|
ARM: at91/dt: kizbox: define main crystal frequency
|
2014-07-09 19:05:18 +02:00 |
lpc32xx.dtsi
|
|
|
Makefile
|
Allwinner DT Additions for 3.18
|
2014-09-25 18:13:49 +02:00 |
marco-evb.dts
|
|
|
marco.dtsi
|
ARM: l2c: prima2: convert to generic l2c OF initialisation
|
2014-05-30 00:49:55 +01:00 |
meson6-atv1200.dts
|
ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS
|
2014-09-25 17:34:14 +02:00 |
meson6.dtsi
|
ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS
|
2014-09-25 17:34:14 +02:00 |
meson.dtsi
|
ARM: DTS: meson: update DTSI to add watchdog node
|
2014-10-02 22:27:42 +02:00 |
mmp2-brownstone.dts
|
|
|
mmp2.dtsi
|
|
|
moxart-uc7112lx.dts
|
ARM: moxart: move fixed rate clock child node to board level dts
|
2014-01-23 18:13:44 -08:00 |
moxart.dtsi
|
ARM: moxart: move fixed rate clock child node to board level dts
|
2014-01-23 18:13:44 -08:00 |
mpa1600.dts
|
ARM: at91/dt: mpa1600: define crytals frequencies
|
2014-07-09 19:05:16 +02:00 |
mt6589-aquaris5.dts
|
ARM: dts: mediatek: Add compatible property for aquaris5
|
2014-09-24 11:12:27 -07:00 |
mt6589.dtsi
|
ARM: dts: mt6589: Change compatible string for GIC
|
2014-09-24 11:12:32 -07:00 |
mxs-pinfunc.h
|
ARM: dts: mxs: add pinctrl header files
|
2013-09-26 13:01:36 +08:00 |
nspire-classic.dtsi
|
|
|
nspire-clp.dts
|
|
|
nspire-cx.dts
|
|
|
nspire-tp.dts
|
|
|
nspire.dtsi
|
|
|
omap2.dtsi
|
ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox
|
2014-04-25 09:53:43 -07:00 |
omap3-beagle-xm-ab.dts
|
ARM: dts: Add support for the BeagleBoard xM A/B
|
2014-04-18 16:50:23 -07:00 |
omap3-beagle-xm.dts
|
ARM: dts: omap: Remove WAKEUPENABLE mux options for UARTs
|
2014-09-18 09:03:36 -07:00 |
omap3-beagle.dts
|
ARM: dts: Enable UART wake-up events for beagleboard
|
2014-08-25 16:15:35 -07:00 |
omap3-cm-t3x30.dtsi
|
ARM: dts: Fix GPMC Ethernet timings for omap cm-t sbc-t boards for device tree
|
2014-04-23 11:29:49 -07:00 |
omap3-cm-t3x.dtsi
|
ARM: dts: cm-t3x30: add HS USB Host support
|
2014-02-28 14:09:11 -08:00 |
omap3-cm-t3517.dts
|
ARM: dts: sbc-t3517: add support for sbc-t3517
|
2014-02-28 14:09:14 -08:00 |
omap3-cm-t3530.dts
|
ARM: dts: Add MMC2/SDIO/WLAN support for cm-t3530
|
2014-03-12 10:40:37 -07:00 |
omap3-cm-t3730.dts
|
ARM: dts: sbc-t3x: refactor DT support
|
2014-02-28 14:09:08 -08:00 |
omap3-devkit8000.dts
|
ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nand
|
2014-04-18 16:37:43 -07:00 |
omap3-evm-37xx.dts
|
fbdev changes for 3.16 (omap devicetree)
|
2014-06-09 18:32:13 -07:00 |
omap3-evm-common.dtsi
|
ARM: dts: Enable twl4030 off-idle configuration for selected omaps
|
2014-06-16 01:10:22 -07:00 |
omap3-evm.dts
|
ARM: dts: Add common support for omap3-evm
|
2013-10-14 11:34:37 -07:00 |
omap3-gta04.dtsi
|
ARM: dts: omap3-gta04: Rename gta04.dts to gta04.dtsi and add a4 model
|
2014-07-29 23:50:23 -07:00 |
omap3-gta04a3.dts
|
ARM: dts: Add gta04a3 model
|
2014-07-29 23:50:53 -07:00 |
omap3-gta04a4.dts
|
ARM: dts: omap3-gta04: Rename gta04.dts to gta04.dtsi and add a4 model
|
2014-07-29 23:50:23 -07:00 |
omap3-gta04a5.dts
|
ARM: dts: Add gta04a5 model
|
2014-07-29 23:51:04 -07:00 |
omap3-ha-common.dtsi
|
ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based)
|
2014-09-08 17:09:11 -07:00 |
omap3-ha-lcd.dts
|
ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based)
|
2014-09-08 17:09:11 -07:00 |
omap3-ha.dts
|
ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based)
|
2014-09-08 17:09:11 -07:00 |
omap3-igep0020.dts
|
ARM: dts: omap3-igep0020: use SMSC9221 timings
|
2014-04-25 09:30:00 -07:00 |
omap3-igep0030.dts
|
ARM: dts: omap3-igep: fix boot fail due wrong compatible match
|
2014-02-28 11:29:18 -08:00 |
omap3-igep.dtsi
|
ARM: dts: omap3-igep0020: use SMSC9221 timings
|
2014-04-25 09:30:00 -07:00 |
omap3-ldp.dts
|
ARM: dts: Enable PMIC idle configuration for LDP
|
2014-09-18 09:03:36 -07:00 |
omap3-lilly-a83x.dtsi
|
ARM: dts: omap3 a83x: fix duplicate usb pin config
|
2014-05-27 13:51:01 -07:00 |
omap3-lilly-dbb056.dts
|
ARM: dts: omap3: Add support for INCOstartec DBB056 baseboard
|
2014-02-28 15:04:28 -08:00 |
omap3-n9.dts
|
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
|
2014-02-13 15:21:36 -08:00 |
omap3-n900.dts
|
ARM: dts: Add support for Ethernet on some N900 macro boards
|
2014-09-18 09:03:36 -07:00 |
omap3-n950-n9.dtsi
|
ARM: dts: n950: Add missing regulator definitions
|
2014-05-06 10:19:49 -07:00 |
omap3-n950.dts
|
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
|
2014-02-13 15:21:36 -08:00 |
omap3-overo-alto35-common.dtsi
|
ARM: dts: overo: Add support for 3.5'' LCD output
|
2014-06-03 10:22:23 +03:00 |
omap3-overo-alto35.dts
|
ARM: dts: Add support for the Overo Alto35
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-base.dtsi
|
ARM: dts: overo: Push uart3 pinmux down to expansion board
|
2014-03-12 10:18:16 -07:00 |
omap3-overo-chestnut43-common.dtsi
|
ARM: dts: overo: Add support for 4.3'' LCD output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-chestnut43.dts
|
ARM: dts: Add support for the Overo Chestnut43
|
2014-03-12 10:21:15 -07:00 |
omap3-overo-common-dvi.dtsi
|
ARM: dts: overo: Add support for DVI output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-common-lcd35.dtsi
|
ARM: dts: overo: Add support for 3.5'' LCD output
|
2014-06-03 10:22:23 +03:00 |
omap3-overo-common-lcd43.dtsi
|
ARM: dts: overo: Add support for 4.3'' LCD output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-common-peripherals.dtsi
|
ARM: dts: omap3-overo: Fix UART wake-up events
|
2014-09-18 09:03:36 -07:00 |
omap3-overo-gallop43-common.dtsi
|
ARM: dts: overo: Add support for 4.3'' LCD output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-gallop43.dts
|
ARM: dts: Add support for the Overo Gallop43
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-palo43-common.dtsi
|
ARM: dts: overo: Add support for 4.3'' LCD output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-palo43.dts
|
ARM: dts: Add support for the Overo Palo43
|
2014-03-12 10:21:13 -07:00 |
omap3-overo-storm-alto35.dts
|
ARM: dts: Add support for the Overo Alto35
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-storm-chestnut43.dts
|
ARM: dts: Add support for the Overo Chestnut43
|
2014-03-12 10:21:15 -07:00 |
omap3-overo-storm-gallop43.dts
|
ARM: dts: Add support for the Overo Gallop43
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-storm-palo43.dts
|
ARM: dts: Add support for the Overo Palo43
|
2014-03-12 10:21:13 -07:00 |
omap3-overo-storm-summit.dts
|
ARM: dts: Add support for the Overo Summit
|
2014-03-12 10:21:16 -07:00 |
omap3-overo-storm-tobi.dts
|
ARM: dts: overo: reorganize include files
|
2014-03-12 10:17:25 -07:00 |
omap3-overo-storm.dtsi
|
ARM: dts: omap3-overo: Add HSUSB PHY
|
2014-03-12 10:17:27 -07:00 |
omap3-overo-summit-common.dtsi
|
ARM: dts: overo: Add support for DVI output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-summit.dts
|
ARM: dts: Add support for the Overo Summit
|
2014-03-12 10:21:16 -07:00 |
omap3-overo-tobi-common.dtsi
|
ARM: dts: overo: Add support for DVI output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-tobi.dts
|
ARM: dts: overo: reorganize include files
|
2014-03-12 10:17:25 -07:00 |
omap3-overo.dtsi
|
Merge branch '3.15/dss-dt-dts' into 3.15/fbdev
|
2014-03-20 08:18:27 +02:00 |
omap3-panel-sharp-ls037v7dw01.dtsi
|
ARM: dts: Add LCD panel sharp ls037v7dw01 support for omap3-evm and ldp
|
2014-06-03 10:22:21 +03:00 |
omap3-sb-t35.dtsi
|
ARM: dts: Fix GPMC timings for LAN9220
|
2014-04-23 11:30:09 -07:00 |
omap3-sbc-t3517.dts
|
ARM: dts: Fix GPMC Ethernet timings for omap cm-t sbc-t boards for device tree
|
2014-04-23 11:29:49 -07:00 |
omap3-sbc-t3530.dts
|
ARM: dts: sbc-t3530: add support for sbc-t3530
|
2014-02-28 14:09:13 -08:00 |
omap3-sbc-t3730.dts
|
ARM: dts: sbc-t3730: add pinmux for usb hub reset
|
2014-02-28 14:09:12 -08:00 |
omap3-tao3530.dtsi
|
ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi
|
2014-09-08 17:07:46 -07:00 |
omap3-thunder.dts
|
ARM: dts: omap3: Add Technexion Thunder support (TAO3530 SOM based)
|
2014-09-08 17:09:11 -07:00 |
omap3-zoom3.dts
|
ARM: dts: Split omap3 pinmux core device
|
2014-01-07 14:01:39 -08:00 |
omap3.dtsi
|
ARM: dts: OMAP2+: Add sub mailboxes device node information
|
2014-09-11 11:46:30 -07:00 |
omap3xxx-clocks.dtsi
|
ARM: dts: set 'ti,set-rate-parent' for dpll4_m5 path
|
2014-05-16 17:08:57 +03:00 |
omap4-cpu-thermal.dtsi
|
arm: dts: add omap4 CPU thermal data
|
2013-12-04 09:34:25 -04:00 |
omap4-duovero-parlor.dts
|
ARM: dts: duovero-parlor: Add HDMI output
|
2014-06-03 10:22:23 +03:00 |
omap4-duovero.dtsi
|
ARM: dts: Enable mcpdm and mcbsp1 on DuoVero
|
2014-05-19 17:20:31 -07:00 |
omap4-panda-a4.dts
|
|
|
omap4-panda-common.dtsi
|
ARM: dts: Fix omap serial wake-up when booted with device tree
|
2014-05-06 13:48:35 -07:00 |
omap4-panda-es.dts
|
ARM: dts: omap4-panda-es: Do not reset gpio1
|
2013-10-20 19:16:53 +02:00 |
omap4-panda.dts
|
|
|
omap4-sdp-es23plus.dts
|
|
|
omap4-sdp.dts
|
ARM: dts: Fix omap serial wake-up when booted with device tree
|
2014-05-06 13:48:35 -07:00 |
omap4-var-dvk-om44.dts
|
ARM: dts: Add VAR-SOM-OM44 WLAN nodes
|
2014-05-19 17:20:30 -07:00 |
omap4-var-om44customboard.dtsi
|
ARM: dts: Add support for OMAP4 Variscite OM44 family
|
2014-05-19 17:20:30 -07:00 |
omap4-var-som-om44-wlan.dtsi
|
ARM: dts: Add VAR-SOM-OM44 WLAN nodes
|
2014-05-19 17:20:30 -07:00 |
omap4-var-som-om44.dtsi
|
ARM: dts: Add support for OMAP4 Variscite OM44 family
|
2014-05-19 17:20:30 -07:00 |
omap4-var-stk-om44.dts
|
ARM: dts: Add VAR-SOM-OM44 WLAN nodes
|
2014-05-19 17:20:30 -07:00 |
omap4.dtsi
|
ARM: dts: OMAP2+: Add sub mailboxes device node information
|
2014-09-11 11:46:30 -07:00 |
omap5-cm-t54.dts
|
ARM: dts: cm-t54: setup omap_dwc3
|
2014-09-18 09:07:52 -07:00 |
omap5-core-thermal.dtsi
|
arm: dts: add omap5 CORE thermal data
|
2013-12-04 09:34:26 -04:00 |
omap5-gpu-thermal.dtsi
|
arm: dts: add omap5 GPU thermal data
|
2013-12-04 09:34:26 -04:00 |
omap5-sbc-t54.dts
|
ARM: dts: sbc-t54: fix mux mode comment style
|
2014-09-18 09:06:51 -07:00 |
omap5-uevm.dts
|
ARM: DTS: omap5-uevm: Enable basic audio (McPDM <-> twl6040)
|
2014-07-15 00:21:25 -07:00 |
omap5.dtsi
|
ARM: dts: OMAP2+: Add sub mailboxes device node information
|
2014-09-11 11:46:30 -07:00 |
omap24xx-clocks.dtsi
|
ARM: dts: omap2 clock data
|
2014-05-28 13:11:36 +03:00 |
omap34xx-hs.dtsi
|
ARM: dts: Fix booting for secure omaps
|
2013-12-06 15:30:43 -08:00 |
omap34xx-omap36xx-clocks.dtsi
|
ARM: dts: omap3 clock data
|
2014-01-17 12:36:41 -08:00 |
omap34xx.dtsi
|
ARM: dts: omap3-n900: Add SSI support
|
2014-05-27 11:59:44 -07:00 |
omap36xx-am35xx-omap3430es2plus-clocks.dtsi
|
ARM: dts: fix omap3 dss clock handle names
|
2014-03-19 09:31:47 +02:00 |
omap36xx-clocks.dtsi
|
ARM: dts: use ti,fixed-factor-clock for dpll4_m5x2_mul_ck
|
2014-05-16 17:08:57 +03:00 |
omap36xx-hs.dtsi
|
ARM: dts: Fix booting for secure omaps
|
2013-12-06 15:30:43 -08:00 |
omap36xx-omap3430es2plus-clocks.dtsi
|
ARM: dts: omap3 clocks: simplify ssi aliases
|
2014-02-28 14:02:25 -08:00 |
omap36xx.dtsi
|
ARM: dts: omap3-n900: Add SSI support
|
2014-05-27 11:59:44 -07:00 |
omap44xx-clocks.dtsi
|
ARM: dts: omap4 clock data
|
2014-01-17 12:35:57 -08:00 |
omap54xx-clocks.dtsi
|
ARM: dts: omap54xx-clocks: Fix the l3 and l4 clock rates
|
2014-08-26 13:04:00 -07:00 |
omap443x-clocks.dtsi
|
ARM: dts: omap4 clock data
|
2014-01-17 12:35:57 -08:00 |
omap443x.dtsi
|
ARM: dts: OMAP4: Add device nodes for ABB
|
2014-03-05 11:53:36 -08:00 |
omap446x-clocks.dtsi
|
ARM: dts: omap4 clock data
|
2014-01-17 12:35:57 -08:00 |
omap2420-clocks.dtsi
|
ARM: dts: omap2 clock data
|
2014-05-28 13:11:36 +03:00 |
omap2420-h4.dts
|
ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
|
2013-10-08 17:51:40 +02:00 |
omap2420-n8x0-common.dtsi
|
ARM: OMAP2+: dts: add n8x0 onenand
|
2013-11-25 15:38:09 -08:00 |
omap2420-n800.dts
|
ARM: dts: Add basic Nokia N8X0 support
|
2013-11-25 15:15:24 -08:00 |
omap2420-n810-wimax.dts
|
ARM: dts: Add basic Nokia N8X0 support
|
2013-11-25 15:15:24 -08:00 |
omap2420-n810.dts
|
ARM: dts: Add basic Nokia N8X0 support
|
2013-11-25 15:15:24 -08:00 |
omap2420.dtsi
|
ARM: dts: OMAP2+: Add sub mailboxes device node information
|
2014-09-11 11:46:30 -07:00 |
omap2430-clocks.dtsi
|
ARM: dts: omap2 clock data
|
2014-05-28 13:11:36 +03:00 |
omap2430-sdp.dts
|
ARM: dts: Add basic device tree support for omap2430 sdp
|
2013-11-25 15:15:23 -08:00 |
omap2430.dtsi
|
ARM: dts: OMAP2+: Add sub mailboxes device node information
|
2014-09-11 11:46:30 -07:00 |
omap3430-sdp.dts
|
ARM: dts: omap3430-sdp: Revert to using software ECC for NAND
|
2014-08-25 16:15:33 -07:00 |
omap3430es1-clocks.dtsi
|
ARM: dts: fix omap3 dss clock handle names
|
2014-03-19 09:31:47 +02:00 |
omap4460.dtsi
|
ARM: dts: OMAP4: Add device nodes for ABB
|
2014-03-05 11:53:36 -08:00 |
omap-gpmc-smsc911x.dtsi
|
ARM: dts: Fix GPMC timings for LAN9220
|
2014-04-23 11:30:09 -07:00 |
omap-gpmc-smsc9221.dtsi
|
ARM: dts: omap: Add common file for SMSC9221
|
2014-03-12 10:18:16 -07:00 |
omap-zoom-common.dtsi
|
ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x
|
2013-11-15 14:33:26 -08:00 |
orion5x-lacie-d2-network.dts
|
ARM: orion5x: convert d2net to Device Tree
|
2014-04-26 19:45:24 +00:00 |
orion5x-lacie-ethernet-disk-mini-v2.dts
|
ARM: orion5x: keep TODO list in edmini_v2 DT
|
2014-04-26 19:45:19 +00:00 |
orion5x-maxtor-shared-storage-2.dts
|
ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree
|
2014-04-26 19:45:25 +00:00 |
orion5x-mv88f5182.dtsi
|
ARM: orion5x: add standard pinctrl configs for sata0 and sata1
|
2014-04-26 19:45:13 +00:00 |
orion5x-rd88f5182-nas.dts
|
ARM: orion5x: convert RD-88F5182 to Device Tree
|
2014-04-26 19:45:22 +00:00 |
orion5x.dtsi
|
ARM: orion5x: add Device Bus description at SoC level
|
2014-04-26 19:45:12 +00:00 |
phy3250.dts
|
|
|
picoxcell-pc3x2.dtsi
|
|
|
picoxcell-pc3x3.dtsi
|
|
|
picoxcell-pc7302-pc3x2.dts
|
|
|
picoxcell-pc7302-pc3x3.dts
|
|
|
pm9g45.dts
|
ARM: at91/dt: pm9g45: crystals frequencies
|
2014-07-09 19:05:20 +02:00 |
prima2-evb.dts
|
|
|
prima2.dtsi
|
Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next
|
2014-06-05 15:57:04 -07:00 |
pxa2xx.dtsi
|
ARM: pxa: dts: fix ohci controller compatible string
|
2014-09-19 01:39:03 +08:00 |
pxa3xx.dtsi
|
ARM: pxa: DTS: override gpio node in pxa3xx.dtsi
|
2013-08-13 15:51:02 -07:00 |
pxa27x.dtsi
|
ARM: pxa: add PWM nodes to pxa27x.dtsi
|
2013-12-11 16:36:47 -08:00 |
pxa168-aspenite.dts
|
|
|
pxa168.dtsi
|
|
|
pxa910-dkb.dts
|
|
|
pxa910.dtsi
|
|
|
qcom-apq8064-ifc6410.dts
|
ARM: DT: apq8064: Add i2c device nodes
|
2014-09-17 17:24:20 -05:00 |
qcom-apq8064-v2.0.dtsi
|
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees
|
2014-05-29 10:39:07 -05:00 |
qcom-apq8064.dtsi
|
ARM: DT: apq8064: Add i2c device nodes
|
2014-09-17 17:24:20 -05:00 |
qcom-apq8074-dragonboard.dts
|
ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 board
|
2014-09-17 17:23:47 -05:00 |
qcom-apq8084-ifc6540.dts
|
ARM: dts: qcom: Add initial IFC6540 board device tree
|
2014-09-11 11:14:00 -05:00 |
qcom-apq8084-mtp.dts
|
ARM: dts: qcom: Add APQ8084 serial port DT node
|
2014-08-21 11:43:33 -05:00 |
qcom-apq8084.dtsi
|
ARM: dts: qcom: Add TLMM DT node for APQ8084
|
2014-09-11 11:14:05 -05:00 |
qcom-ipq8064-ap148.dts
|
ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees
|
2014-08-21 11:43:34 -05:00 |
qcom-ipq8064-v1.0.dtsi
|
ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees
|
2014-08-21 11:43:34 -05:00 |
qcom-ipq8064.dtsi
|
ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees
|
2014-08-21 11:43:34 -05:00 |
qcom-msm8660-surf.dts
|
ARM: DT: msm8660: Add sdcc nodes
|
2014-09-22 13:49:41 -05:00 |
qcom-msm8660.dtsi
|
ARM: DT: msm8660: Add sdcc nodes
|
2014-09-22 13:49:41 -05:00 |
qcom-msm8960-cdp.dts
|
ARM: DT: msm8960: Add sdcc nodes
|
2014-09-22 13:49:43 -05:00 |
qcom-msm8960.dtsi
|
ARM: DT: msm8960: Add sdcc nodes
|
2014-09-22 13:49:43 -05:00 |
qcom-msm8974.dtsi
|
ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 board
|
2014-09-17 17:23:47 -05:00 |
r7s72100-genmai.dts
|
ARM: shmobile: genmai reference dts: Add RSPI node
|
2014-07-06 16:29:34 +02:00 |
r7s72100.dtsi
|
ARM: shmobile: Update r7s72100 DTS to include CPU frequency
|
2014-06-17 19:50:33 +09:00 |
r8a73a4-ape6evm-reference.dts
|
ARM: shmobile: ape6evm-reference: Initialise SCIF device using DT
|
2014-07-12 15:16:57 +02:00 |
r8a73a4-ape6evm.dts
|
ARM: shmobile: Include all 2 GiB of memory on APE6EVM
|
2013-12-10 17:27:17 +09:00 |
r8a73a4.dtsi
|
ARM: shmobile: r8a73a4 dtsi: Add SoC-specific irqc compatible property
|
2014-09-16 09:37:41 +09:00 |
r8a7740-armadillo800eva-reference.dts
|
ARM: shmobile: armadillo800eva-reference: Initialise SCIF device using DT
|
2014-07-12 15:16:57 +02:00 |
r8a7740-armadillo800eva.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
r8a7740.dtsi
|
ARM: shmobile: r8a7740: Add SCIF nodes
|
2014-07-12 15:16:57 +02:00 |
r8a7778-bockw-reference.dts
|
ARM: shmobile: bockw-reference: Initialise SCIF device using DT
|
2014-07-12 15:16:56 +02:00 |
r8a7778-bockw.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
r8a7778.dtsi
|
ARM: shmobile: r8a7778: Add SCIF nodes
|
2014-07-12 15:16:56 +02:00 |
r8a7779-marzen.dts
|
ARM: shmobile: marzen: Consistently use tabs for indentation
|
2014-07-09 10:36:01 +02:00 |
r8a7779.dtsi
|
ARM: shmobile: r8a7779 dtsi: Use tabs for indentation
|
2014-09-02 10:22:42 +09:00 |
r8a7790-lager.dts
|
The i.MX device tree changes for 3.18:
|
2014-09-24 11:29:50 -07:00 |
r8a7790.dtsi
|
ARM: shmobile: r8a7790 dtsi: Remove superfluous interrupt-parent
|
2014-08-22 12:34:46 +09:00 |
r8a7791-henninger.dts
|
ARM: shmobile: henninger: add VIN0/ADV7180 DT support
|
2014-08-17 09:44:05 +09:00 |
r8a7791-koelsch.dts
|
The i.MX device tree changes for 3.18:
|
2014-09-24 11:29:50 -07:00 |
r8a7791.dtsi
|
ARM: shmobile: r8a7791 dtsi: Remove superfluous interrupt-parent
|
2014-08-22 12:34:50 +09:00 |
r8a7794-alt.dts
|
ARM: shmobile: Initial Alt board device tree
|
2014-09-09 11:29:27 +09:00 |
r8a7794.dtsi
|
ARM: shmobile: Initial r8a7794 SoC device tree
|
2014-09-09 11:29:08 +09:00 |
rk3xxx.dtsi
|
More peripheral support for Rockchip SoCs
|
2014-09-23 22:27:51 -07:00 |
rk3066a-bqcurie2.dts
|
arm: dts: Add Altera SDRAM EDAC bindings & devicetree entries.
|
2014-09-09 16:49:28 +02:00 |
rk3066a.dtsi
|
ARM: dts: rockchip: add emmc nodes for rk3066 and rk3188
|
2014-09-13 20:28:17 +02:00 |
rk3188-radxarock.dts
|
More peripheral support for Rockchip SoCs
|
2014-09-23 22:27:51 -07:00 |
rk3188.dtsi
|
ARM: dts: rockchip: fix rk3188 emmc pull references
|
2014-09-16 18:59:36 +02:00 |
rk3288-evb-act8846.dts
|
ARM: dts: Move the PMIC interrupt pinctrl line to rk3288-evb common
|
2014-08-16 22:30:56 +02:00 |
rk3288-evb-rk808.dts
|
ARM: dts: Switch i2c0 to 400kHz on rk3288-evb-rk808
|
2014-09-11 11:22:43 +02:00 |
rk3288-evb.dtsi
|
ARM: dts: Enable USB host1(dwc) on rk3288-evb
|
2014-09-09 10:01:21 +02:00 |
rk3288.dtsi
|
ARM: dts: add rk3288 i2s controller
|
2014-09-26 00:38:53 +02:00 |
s3c24xx.dtsi
|
ARM: dts: SAMSUNG: Add aliases of UART nodes
|
2014-07-09 17:22:55 -07:00 |
s3c64xx-pinctrl.dtsi
|
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
|
2013-09-17 06:48:28 +09:00 |
s3c64xx.dtsi
|
ARM: dts: SAMSUNG: Add aliases of UART nodes
|
2014-07-09 17:22:55 -07:00 |
s3c2416-pinctrl.dtsi
|
|
|
s3c2416-smdk2416.dts
|
ARM: dts: add clock data for s3c2416
|
2014-04-15 02:11:08 +09:00 |
s3c2416.dtsi
|
ARM: dts: SAMSUNG: Add aliases of UART nodes
|
2014-07-09 17:22:55 -07:00 |
s3c6400.dtsi
|
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
|
2013-09-17 06:48:28 +09:00 |
s3c6410-mini6410.dts
|
ARM: dts: Add dts file for S3C6410-based Mini6410 board
|
2013-09-17 06:48:29 +09:00 |
s3c6410-smdk6410.dts
|
ARM: dts: Add dts file for S3C6410-based SMDK6410 board
|
2013-09-17 06:48:29 +09:00 |
s3c6410.dtsi
|
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
|
2013-09-17 06:48:28 +09:00 |
s5pv210-aquila.dts
|
ARM: dts: Add Device tree for s5pc110/s5pv210 boards
|
2014-07-19 04:31:51 +09:00 |
s5pv210-goni.dts
|
ARM: dts: Add Device tree for s5pc110/s5pv210 boards
|
2014-07-19 04:31:51 +09:00 |
s5pv210-pinctrl.dtsi
|
ARM: dts: Add Device tree for s5pv210 SoC
|
2014-07-19 04:31:20 +09:00 |
s5pv210-smdkc110.dts
|
ARM: dts: Add Device tree for s5pc110/s5pv210 boards
|
2014-07-19 04:31:51 +09:00 |
s5pv210-smdkv210.dts
|
ARM: dts: Add Device tree for s5pc110/s5pv210 boards
|
2014-07-19 04:31:51 +09:00 |
s5pv210-torbreck.dts
|
ARM: dts: Add Device tree for s5pc110/s5pv210 boards
|
2014-07-19 04:31:51 +09:00 |
s5pv210.dtsi
|
ARM: dts: Add Device tree for s5pv210 SoC
|
2014-07-19 04:31:20 +09:00 |
sama5d3_can.dtsi
|
ARM: at91/dt: Fix typo regarding can0_clk
|
2014-09-18 16:53:46 +02:00 |
sama5d3_emac.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
sama5d3_gmac.dtsi
|
ARM: at91: change compatibility string for sama5d3x gem
|
2014-07-24 23:39:55 -07:00 |
sama5d3_lcd.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
sama5d3_mci2.dtsi
|
dt-bindings: clock: Move at91.h to dt-bindigs/clock
|
2014-04-18 23:44:52 +02:00 |
sama5d3_tcb1.dtsi
|
dt-bindings: clock: Move at91.h to dt-bindigs/clock
|
2014-04-18 23:44:52 +02:00 |
sama5d3_uart.dtsi
|
dt-bindings: clock: Move at91.h to dt-bindigs/clock
|
2014-04-18 23:44:52 +02:00 |
sama5d3.dtsi
|
ARM: at91/dt: sama5d3: use new pinctrl compatible string
|
2014-09-18 17:33:55 +02:00 |
sama5d3xcm.dtsi
|
ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek boards
|
2014-09-01 19:29:03 +02:00 |
sama5d3xdm.dtsi
|
ARM: at91/dt: sama5d3: remove useless adc properties
|
2014-03-12 19:11:29 +01:00 |
sama5d3xmb.dtsi
|
ARM: at91: sama5d3xek: reserve dma channel for audio
|
2014-09-18 15:21:03 +02:00 |
sama5d31.dtsi
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d31ek.dts
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d33.dtsi
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d33ek.dts
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d34.dtsi
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d34ek.dts
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d35.dtsi
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d35ek.dts
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d36.dtsi
|
ARM: at91: fix network interface ordering for sama5d36
|
2014-03-11 12:49:10 -07:00 |
sama5d36ek.dts
|
ARM: at91: sama5d3/dt: add sama5d36ek dts files
|
2013-12-10 09:59:57 -08:00 |
samsung_k3pe0e000b.dtsi
|
|
|
sh73a0-kzm9g-reference.dts
|
ARM: shmobile: kzm9g-reference dts: Use tabs for indentation
|
2014-09-02 10:22:42 +09:00 |
sh73a0-kzm9g.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
sh73a0.dtsi
|
ARM: shmobile: sh73a0 dtsi: Move interrupt-parent to the top
|
2014-08-22 12:34:53 +09:00 |
sh7372-mackerel.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
sh7372.dtsi
|
|
|
skeleton64.dtsi
|
|
|
skeleton.dtsi
|
|
|
socfpga_arria5_socdk.dts
|
ARM: dts: socfpga: remove extra alias in the ArriaV devkit
|
2014-09-04 10:15:50 -05:00 |
socfpga_arria5.dtsi
|
ARM: dts: socfpga: memreserve first 4KB for future system use
|
2014-09-04 10:15:51 -05:00 |
socfpga_cyclone5_socdk.dts
|
ARM: dts: socfpga: Add SD card detect
|
2014-09-04 10:15:51 -05:00 |
socfpga_cyclone5_sockit.dts
|
ARM: socfpga: dts: Add DTS entries for USB
|
2014-05-05 22:33:16 -05:00 |
socfpga_cyclone5_socrates.dts
|
ARM: socfpga: dts: convert to preprocessor includes
|
2014-05-05 22:33:14 -05:00 |
socfpga_cyclone5.dtsi
|
ARM: dts: socfpga: memreserve first 4KB for future system use
|
2014-09-04 10:15:51 -05:00 |
socfpga_vt.dts
|
ARM: dts: socfpga: unuse the slot-node and deprecate the supports-highspeed for
|
2014-09-04 10:15:13 -05:00 |
socfpga.dtsi
|
arm: dts: Add Altera SDRAM EDAC bindings & devicetree entries.
|
2014-09-04 10:15:52 -05:00 |
spear3xx.dtsi
|
|
|
spear13xx.dtsi
|
ARM: SPEAr13xx: Add pcie and miphy DT nodes
|
2014-07-14 11:04:43 +05:30 |
spear300-evb.dts
|
|
|
spear300.dtsi
|
|
|
spear310-evb.dts
|
|
|
spear310.dtsi
|
|
|
spear320-evb.dts
|
|
|
spear320-hmi.dts
|
Shiraz has moved
|
2014-04-18 16:40:08 -07:00 |
spear320.dtsi
|
|
|
spear600-evb.dts
|
|
|
spear600.dtsi
|
|
|
spear1310-evb.dts
|
ARM: SPEAr13xx: Add pcie and miphy DT nodes
|
2014-07-14 11:04:43 +05:30 |
spear1310.dtsi
|
ARM: SPEAr13xx: Add pcie and miphy DT nodes
|
2014-07-14 11:04:43 +05:30 |
spear1340-evb.dts
|
ARM: SPEAr13xx: Add pcie and miphy DT nodes
|
2014-07-14 11:04:43 +05:30 |
spear1340.dtsi
|
ARM: SPEAr13xx: Add pcie and miphy DT nodes
|
2014-07-14 11:04:43 +05:30 |
st-pincfg.h
|
ARM: STi: OF: Fix a typo in pincfg header
|
2013-12-04 08:58:39 +00:00 |
ste-ccu8540-pinctrl.dtsi
|
ARM: ux500: fix devicetree builds
|
2013-08-14 22:32:07 +02:00 |
ste-ccu8540.dts
|
arm: dts: Fix missing device_type="memory" for ste-ccu8540
|
2014-05-16 15:22:40 +01:00 |
ste-ccu9540.dts
|
ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
|
2014-05-12 12:52:40 +02:00 |
ste-dbx5x0.dtsi
|
ARM: ux500: add some DB8500 DMA channel info
|
2014-07-07 11:54:06 +02:00 |
ste-href-ab8500.dtsi
|
ARM: ux500: move AB8500 clock out pins to DT
|
2014-02-04 20:50:50 +01:00 |
ste-href-ab8505.dtsi
|
ARM: ux500: move last AB8505 set-up to DT
|
2014-02-04 20:50:55 +01:00 |
ste-href-family-pinctrl.dtsi
|
ARM: ux500: move the WLAN GPIO pin setup to the device tree
|
2013-11-26 21:01:56 +01:00 |
ste-href-stuib.dtsi
|
ARM: ux500: add VCC and VIO regulators to STMPE IC
|
2014-07-07 11:53:32 +02:00 |
ste-href-tvk1281618.dtsi
|
ARM: ux500: add misc sensors to the device trees
|
2014-07-07 11:54:07 +02:00 |
ste-href.dtsi
|
ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href
|
2014-05-12 12:52:44 +02:00 |
ste-hrefprev60-stuib.dts
|
ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS
|
2013-10-03 10:29:24 +02:00 |
ste-hrefprev60-tvk.dts
|
ARM: ux500: split the HREF DTS files from two to four
|
2013-10-02 16:17:04 +02:00 |
ste-hrefprev60.dtsi
|
ARM: ux500: move AB8500 GPIOs to device tree
|
2014-02-04 20:46:50 +01:00 |
ste-hrefv60plus-stuib.dts
|
ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS
|
2013-10-03 10:29:24 +02:00 |
ste-hrefv60plus-tvk.dts
|
ARM: ux500: split the HREF DTS files from two to four
|
2013-10-02 16:17:04 +02:00 |
ste-hrefv60plus.dtsi
|
ARM: ux500: add misc sensors to the device trees
|
2014-07-07 11:54:07 +02:00 |
ste-nomadik-pinctrl.dtsi
|
ARM: ux500: move GPIO key configuration to device tree
|
2013-11-26 21:01:56 +01:00 |
ste-nomadik-s8815.dts
|
ARM: nomadik: fix up double inversion in DT
|
2014-07-30 12:47:17 -07:00 |
ste-nomadik-stn8815.dtsi
|
ARM: nomadik: fix up double inversion in DT
|
2014-07-30 12:47:17 -07:00 |
ste-snowball.dts
|
ARM: ux500: add misc sensors to the device trees
|
2014-07-07 11:54:07 +02:00 |
ste-u300.dts
|
ARM: u300: Convert to the common mmc DT bindings for highspeed mode
|
2014-05-12 12:52:41 +02:00 |
stih41x-b2000.dtsi
|
ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs
|
2014-05-21 14:27:14 +02:00 |
stih41x-b2020.dtsi
|
ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs
|
2014-05-21 14:27:14 +02:00 |
stih41x-b2020x.dtsi
|
ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
|
2014-03-27 02:01:25 +01:00 |
stih41x.dtsi
|
ARM: sti: stih41x: Provide a proper header for this DTSI file
|
2014-05-21 14:27:16 +02:00 |
stih407-b2120.dts
|
ARM: dts: STiH407: Add B2120 board support
|
2014-05-21 14:20:33 +02:00 |
stih407-clock.dtsi
|
ARM: dts: Add STiH407 SoC support
|
2014-05-21 14:20:27 +02:00 |
stih407-pinctrl.dtsi
|
ARM: dts: Add STiH407 SoC support
|
2014-05-21 14:20:27 +02:00 |
stih407.dtsi
|
ARM: dts: Add STiH407 SoC support
|
2014-05-21 14:20:27 +02:00 |
stih415-b2000.dts
|
ARM: dts: Fix STi boards compatibles
|
2014-05-21 14:20:23 +02:00 |
stih415-b2020.dts
|
ARM: dts: Fix STi boards compatibles
|
2014-05-21 14:20:23 +02:00 |
stih415-clock.dtsi
|
ARM: STi: DT: STiH415: 415 DT Entry for clockgen A9
|
2014-05-21 14:27:14 +02:00 |
stih415-pinctrl.dtsi
|
Merge tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt
|
2014-05-23 22:35:56 +02:00 |
stih415.dtsi
|
ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6
|
2014-06-17 16:55:17 +02:00 |
stih416-b2000.dts
|
ARM: dts: Fix STi boards compatibles
|
2014-05-21 14:20:23 +02:00 |
stih416-b2020.dts
|
ARM: dts: Fix STi boards compatibles
|
2014-05-21 14:20:23 +02:00 |
stih416-b2020e.dts
|
ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts
|
2014-06-19 10:45:36 +02:00 |
stih416-clock.dtsi
|
ARM: STi: DT: STiH416: 416 DT Entry for clockgen A9/DDR/GPU
|
2014-05-21 14:27:11 +02:00 |
stih416-pinctrl.dtsi
|
Merge tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt
|
2014-05-23 22:35:56 +02:00 |
stih416.dtsi
|
ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6
|
2014-06-17 16:55:17 +02:00 |
sun4i-a10-a1000.dts
|
ARM: dts: sun4i: Add ir node to various boards
|
2014-07-01 10:05:38 +02:00 |
sun4i-a10-ba10-tvbox.dts
|
ARM: dts: sun4i: Add new ba10-tvbox board
|
2014-07-01 10:01:16 +02:00 |
sun4i-a10-cubieboard.dts
|
ARM: dts: sun4i: Add ir node to various boards
|
2014-07-01 10:05:38 +02:00 |
sun4i-a10-hackberry.dts
|
ARM: dts: sun4i: Add ir node to various boards
|
2014-07-01 10:05:38 +02:00 |
sun4i-a10-inet97fv2.dts
|
ARM: dts: sun4i: Add AXP209 support to various boards
|
2014-07-01 09:48:54 +02:00 |
sun4i-a10-mini-xplus.dts
|
ARM: dts: sun4i: Add ir node to various boards
|
2014-07-01 10:05:38 +02:00 |
sun4i-a10-olinuxino-lime.dts
|
ARM: dts: sun4i: Add AXP209 support to various boards
|
2014-07-01 09:48:54 +02:00 |
sun4i-a10-pcduino.dts
|
ARM: dts: sun4i: Add AXP209 support to various boards
|
2014-07-01 09:48:54 +02:00 |
sun4i-a10.dtsi
|
ARM: dt: sunxi: Remove i2c controller clock-frequency that matches default
|
2014-08-18 19:51:50 +02:00 |
sun5i-a10s-olinuxino-micro.dts
|
ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes
|
2014-05-11 19:07:07 +02:00 |
sun5i-a10s-r7-tv-dongle.dts
|
ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board
|
2014-05-12 17:06:55 +02:00 |
sun5i-a10s.dtsi
|
ARM: dt: sunxi: Remove i2c controller clock-frequency that matches default
|
2014-08-18 19:51:50 +02:00 |
sun5i-a13-hsg-h702.dts
|
ARM: dts: sun5i: Add DT for HSG H702 tablet board
|
2014-09-17 17:46:05 +02:00 |
sun5i-a13-olinuxino-micro.dts
|
ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes
|
2014-05-11 19:07:07 +02:00 |
sun5i-a13-olinuxino.dts
|
ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes
|
2014-05-11 19:07:07 +02:00 |
sun5i-a13.dtsi
|
ARM: dt: sunxi: Remove i2c controller clock-frequency that matches default
|
2014-08-18 19:51:50 +02:00 |
sun6i-a31-app4-evb1.dts
|
ARM: sunxi: dt: add APP4-EVB1 board support
|
2014-05-14 14:30:05 +02:00 |
sun6i-a31-colombus.dts
|
ARM: sun6i: Add MMC0 controller to the Colombus board
|
2014-05-22 10:49:21 +02:00 |
sun6i-a31-hummingbird.dts
|
ARM: dts: sun6i: Add Merrii A31 Hummingbird support
|
2014-07-18 22:40:37 +02:00 |
sun6i-a31-m9.dts
|
ARM: dts: sun6i: Add reg_vcc3v3 to sun6i board mmc nodes
|
2014-05-11 19:07:10 +02:00 |
sun6i-a31.dtsi
|
Allwinner DT Additions for 3.18
|
2014-09-25 18:13:49 +02:00 |
sun7i-a20-cubieboard2.dts
|
ARM: dts: sun7i: Add AXP209 support to various boards
|
2014-07-01 09:48:54 +02:00 |
sun7i-a20-cubietruck.dts
|
ARM: dts: sun7i: Add AXP209 support to various boards
|
2014-07-01 09:48:54 +02:00 |
sun7i-a20-hummingbird.dts
|
ARM: dts: sun7i: Add Merrii A20 Hummingbird board
|
2014-08-19 13:19:35 +02:00 |
sun7i-a20-i12-tvbox.dts
|
ARM: dts: sun7i: Add ir receiver support to a20-i12-tvbox
|
2014-07-01 09:48:55 +02:00 |
sun7i-a20-olinuxino-lime.dts
|
ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME
|
2014-08-27 22:47:05 +02:00 |
sun7i-a20-olinuxino-micro.dts
|
ARM: dts: sun7i: Add AXP209 support to various boards
|
2014-07-01 09:48:54 +02:00 |
sun7i-a20-pcduino3.dts
|
ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3
|
2014-07-01 09:49:37 +02:00 |
sun7i-a20.dtsi
|
ARM: sun7i: Relicense the A20 DTSI under GPLv2/X11
|
2014-09-07 17:49:53 +02:00 |
sun8i-a23-ippo-q8h-v5.dts
|
ARM: dts: sun8i: Enable i2c controllers on ippo-q8h-v5
|
2014-08-18 19:33:22 +02:00 |
sun8i-a23.dtsi
|
ARM: dts: sun8i: Add DMA controller node
|
2014-09-20 12:39:13 +02:00 |
sunxi-common-regulators.dtsi
|
ARM: dts: sunxi: Add fixed 5V regulator
|
2014-09-17 17:45:45 +02:00 |
tegra20-colibri-512.dtsi
|
ARM: SoC DT updates for 3.14
|
2014-01-23 18:45:38 -08:00 |
tegra20-harmony.dts
|
ARM: tegra: Remove legacy PCIe power supply properties
|
2014-07-18 11:20:10 +02:00 |
tegra20-iris-512.dts
|
ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines
|
2013-12-16 14:09:20 -07:00 |
tegra20-medcom-wide.dts
|
ARM: tegra: tamonten: add the display to the Medcom Wide
|
2014-07-17 15:02:10 +02:00 |
tegra20-paz00.dts
|
ARM: tegra: paz00: Fix some indentation inconsistencies
|
2014-07-30 12:48:52 -07:00 |
tegra20-plutux.dts
|
ARM: tegra: tamonten: add the base board regulators
|
2014-07-17 15:02:09 +02:00 |
tegra20-seaboard.dts
|
ARM: tegra: enable LCD panel on Seaboard
|
2014-02-19 10:15:37 -07:00 |
tegra20-tamonten.dtsi
|
ARM: SoC driver changes for 3.17
|
2014-08-08 11:34:32 -07:00 |
tegra20-tec.dts
|
ARM: tegra: tamonten: add the base board regulators
|
2014-07-17 15:02:09 +02:00 |
tegra20-trimslice.dts
|
ARM: tegra: Remove legacy PCIe power supply properties
|
2014-07-18 11:20:10 +02:00 |
tegra20-ventana.dts
|
ARM: tegra: enable LCD panel on Ventana
|
2014-02-19 10:15:45 -07:00 |
tegra20-whistler.dts
|
ARM: tegra: set up /aliases entries for RTCs
|
2013-12-18 14:10:48 -07:00 |
tegra20.dtsi
|
ARM: tegra: Add device tree nodes for flow controller
|
2014-08-26 11:47:21 -06:00 |
tegra30-apalis-eval.dts
|
ARM: tegra: apalis t30: fix device tree compatible node
|
2014-07-30 12:49:00 -07:00 |
tegra30-apalis.dtsi
|
ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies
|
2014-08-24 11:21:19 -07:00 |
tegra30-beaver.dts
|
ARM: tegra: Remove legacy PCIe power supply properties
|
2014-07-18 11:20:10 +02:00 |
tegra30-cardhu-a02.dts
|
ARM: tegra: fix node sort order
|
2013-12-16 14:09:17 -07:00 |
tegra30-cardhu-a04.dts
|
ARM: tegra: fix node sort order
|
2013-12-16 14:09:17 -07:00 |
tegra30-cardhu.dtsi
|
ARM: tegra: Remove legacy PCIe power supply properties
|
2014-07-18 11:20:10 +02:00 |
tegra30-colibri-eval-v3.dts
|
ARM: tegra: initial add of Colibri T30
|
2014-05-15 12:30:40 -06:00 |
tegra30-colibri.dtsi
|
ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies
|
2014-08-24 11:21:19 -07:00 |
tegra30.dtsi
|
ARM: tegra: Add device tree nodes for flow controller
|
2014-08-26 11:47:21 -06:00 |
tegra114-dalmore.dts
|
ARM: tegra: add SD wp-gpios to Dalmore DT
|
2014-04-29 10:09:54 -06:00 |
tegra114-roth.dts
|
ARM: tegra: roth: add display DT node
|
2014-07-17 15:02:14 +02:00 |
tegra114-tn7.dts
|
ARM: tegra: add Tegra Note 7 device tree
|
2014-05-02 12:17:11 -06:00 |
tegra114.dtsi
|
ARM: tegra: Add device tree nodes for flow controller
|
2014-08-26 11:47:21 -06:00 |
tegra124-jetson-tk1.dts
|
ARM: tegra: enable PCIe in Jetson TK1 DT
|
2014-09-17 10:06:22 -06:00 |
tegra124-nyan-big.dts
|
ARM: tegra: add Acer Chromebook 13 device tree
|
2014-09-05 11:00:23 -06:00 |
tegra124-venice2.dts
|
ARM: tegra: rely on bootloader pinmux programming on Tegra124
|
2014-09-05 11:04:30 -06:00 |
tegra124.dtsi
|
ARM: tegra: add PCIe to Tegra124 DT
|
2014-09-17 10:06:06 -06:00 |
tny_a9g20.dts
|
|
|
tny_a9260_common.dtsi
|
ARM: at91/dt: tny_a9260: define crystals frequencies
|
2014-07-09 19:05:15 +02:00 |
tny_a9260.dts
|
|
|
tny_a9263.dts
|
ARM: at91/dt: tny_a9263: define crystals frequencies
|
2014-07-09 19:05:22 +02:00 |
tps6507x.dtsi
|
|
|
tps65217.dtsi
|
|
|
tps65910.dtsi
|
ARM: dts: tps65910 backup battery regulator
|
2014-02-28 13:52:25 -08:00 |
twl4030_omap3.dtsi
|
ARM: dts: Configure omap3 twl4030 I2C4 pins by default
|
2014-05-06 15:45:14 -07:00 |
twl4030.dtsi
|
ARM: dts: twl4030: Add madc
|
2014-05-06 10:19:49 -07:00 |
twl6030_omap4.dtsi
|
ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file
|
2013-10-08 17:51:41 +02:00 |
twl6030.dtsi
|
ARM: dts: Remove twl6030 clk32g "regulator"
|
2014-08-25 16:15:34 -07:00 |
usb_a9g20_common.dtsi
|
|
|
usb_a9g20_lpw.dts
|
|
|
usb_a9g20-dab-mmx.dtsi
|
|
|
usb_a9g20.dts
|
|
|
usb_a9260_common.dtsi
|
ARM: at91/dt: usb_a9260: define crystals frequencies
|
2014-07-09 19:05:14 +02:00 |
usb_a9260.dts
|
|
|
usb_a9263.dts
|
ARM: at91/dt: usb_a9263: define crystals frequencies
|
2014-07-09 19:05:23 +02:00 |
versatile-ab.dts
|
The branch contains the following device tree changes the v3.17 merge
|
2014-08-14 09:53:39 -06:00 |
versatile-pb.dts
|
The branch contains the following device tree changes the v3.17 merge
|
2014-08-14 09:53:39 -06:00 |
vexpress-v2m-rs1.dtsi
|
ARM: vexpress: Add CLCD Device Tree properties
|
2014-09-25 23:54:33 +02:00 |
vexpress-v2m.dtsi
|
ARM: vexpress: Add CLCD Device Tree properties
|
2014-09-25 23:54:33 +02:00 |
vexpress-v2p-ca5s.dts
|
dts: ca5: add the global timer for the A5
|
2014-04-22 11:44:26 +02:00 |
vexpress-v2p-ca9.dts
|
ARM: vexpress: Add CLCD Device Tree properties
|
2014-09-25 23:54:33 +02:00 |
vexpress-v2p-ca15_a7.dts
|
mfd: vexpress: Convert custom func API to regmap
|
2014-05-15 17:02:18 +01:00 |
vexpress-v2p-ca15-tc1.dts
|
|
|
vf610-colibri-eval-v3.dts
|
ARM: dts: vf610-colibri: split device tree for carrier boards
|
2014-09-16 10:25:49 +08:00 |
vf610-colibri.dtsi
|
ARM: dts: vf610-colibri: Add USB support
|
2014-09-16 10:25:54 +08:00 |
vf610-cosmic.dts
|
ARM: dts: vf610: make pinctrl nodes board specific
|
2014-02-09 21:32:28 +08:00 |
vf610-pinfunc.h
|
|
|
vf610-twr.dts
|
ARM: dts: vf610-twr: Add USB support
|
2014-09-16 10:25:55 +08:00 |
vf610.dtsi
|
ARM: dts: vf610: Add usbmisc for non-core registers
|
2014-09-16 10:25:54 +08:00 |
vt8500-bv07.dts
|
|
|
vt8500.dtsi
|
net: via-rhine: add OF bus binding
|
2014-04-23 15:24:06 -04:00 |
wm8505-ref.dts
|
|
|
wm8505.dtsi
|
|
|
wm8650-mid.dts
|
|
|
wm8650.dtsi
|
net: via-rhine: add OF bus binding
|
2014-04-23 15:24:06 -04:00 |
wm8750-apc8750.dts
|
|
|
wm8750.dtsi
|
|
|
wm8850-w70v2.dts
|
ARM: dts: Use the PWM polarity flags
|
2013-09-03 13:08:11 +02:00 |
wm8850.dtsi
|
net: via-rhine: add OF bus binding
|
2014-04-23 15:24:06 -04:00 |
xenvm-4.2.dts
|
|
|
zynq-7000.dtsi
|
ARM: zynq: DT: Fix coding style issues in dtsi
|
2014-09-01 13:12:35 +02:00 |
zynq-parallella.dts
|
ARM: zynq: Add ISL9305 regulator on Parallella board
|
2014-09-16 12:48:57 +02:00 |
zynq-zc702.dts
|
ARM: zynq: DT: Add Ethernet phys
|
2014-09-16 12:48:56 +02:00 |
zynq-zc706.dts
|
ARM: zynq: DT: Add Ethernet phys
|
2014-09-16 12:48:56 +02:00 |
zynq-zed.dts
|
ARM: zynq: DT: Add Ethernet phys
|
2014-09-16 12:48:56 +02:00 |