Allwinner R40 SoC features a USB OTG port and two USB HOST ports.
Add support for the host ports in the DTSI file.
The OTG controller still cannot work with existing compatibles, and needs
more investigation. So it's not added yet.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
support for omap35xx-evm, am34xx-epos-evm and dra7:
- A series of changes to fix support for omap35xx-evm
- A series of changes to add earlycon support for n8x0, pandaboard
and omap5 boards
- A series of changes for am43xx-epos-evm pinctrl modes for default
and sleep states
- A series of changes to correct pbias regulator voltage for dra7
from 3V to 3.3V
- Use microchip compatible instead of deprecated mcp compatible for
mcp23017
-----BEGIN PGP SIGNATURE-----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=xWf5
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "device tree changes for omaps for v4.15 merge window" from Tony Lindgren:
Device tree changes for omaps for v4.15 merge window to improve
support for omap35xx-evm, am34xx-epos-evm and dra7:
- A series of changes to fix support for omap35xx-evm
- A series of changes to add earlycon support for n8x0, pandaboard
and omap5 boards
- A series of changes for am43xx-epos-evm pinctrl modes for default
and sleep states
- A series of changes to correct pbias regulator voltage for dra7
from 3V to 3.3V
- Use microchip compatible instead of deprecated mcp compatible for
mcp23017
* tag 'omap-for-v4.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (22 commits)
ARM: dts: omap3: Replace deprecated mcp prefix
ARM: dts: dra7-evm: Move pcie RC node to common file
ARM: dts: omap5: Increase max-voltage of pbias regulator
ARM: dts: dra7: Increase max-voltage of pbias regulator
ARM: dts: am43xx-epos-evm: Add default pinmux for unused pins
ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for usb2_phy1 and usb2_phy2
ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for uart0
ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for matrix_keypad0
ARM: dts: am43xx-epos-evm: Add sleep pinmux for mmc1
ARM: dts: am43xx-epos-evm: Add sleep pinmux for pixcir_ts
ARM: dts: am43xx-epos-evm: Add sleep pinmux for gpmc
ARM: dts: am43xx-epos-evm: Add sleep pinmux for ecap0
ARM: dts: am43xx-epos-evm: Add sleep pinmux for qspi1
ARM: dts: am43xx-epos-evm: Add sleep pinmux for spi0 and spi1
ARM: dts: am43xx: Introduce additional pinmux definitions for DS0
ARM: dts: Configure earlycon for omap5-common
ARM: dts: Configure earlycon for pandaboard
ARM: dts: Configure earlycon for n8x0
ARM: dts: omap3-evm: Add DSS {vdds_dsi,vdda_video}-supply references
ARM: dts: omap3: Add Sharp LS037V7DW01 'envdd' supply
...
dts files fixed up to contain the necessary data for basic resources, we
can drop the related platform data.
Note that this branch depends on the "omap-for-v4.15/fixes-dt-signed"
branch and the patches with dependencies are based on a merge with that
branch.
These patches first ensure things keep working for the legacy "ti,hwmods"
property when we start making it optional, then adds a minimal TI sysc
interconnect target device driver to handle the new generic "ti,sysc"
compatible property. And then we can finally drop the legacy platform
data for IRQ, DMA and IO resources as seen in the diffstats.
-----BEGIN PGP SIGNATURE-----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=UKzm
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.15/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "more soc changes for omaps for v4.15 merge window" from Tony Lindgren:
Drop omap legacy platform data for IRQ, DMA and IO resources. With the
dts files fixed up to contain the necessary data for basic resources, we
can drop the related platform data.
Note that this branch depends on the "omap-for-v4.15/fixes-dt-signed"
branch and the patches with dependencies are based on a merge with that
branch.
These patches first ensure things keep working for the legacy "ti,hwmods"
property when we start making it optional, then adds a minimal TI sysc
interconnect target device driver to handle the new generic "ti,sysc"
compatible property. And then we can finally drop the legacy platform
data for IRQ, DMA and IO resources as seen in the diffstats.
* tag 'omap-for-v4.15/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits)
bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
bus: ti-sysc: mark PM functions as __maybe_unused
ARM: OMAP2+: omap_device: fix error return code in omap_device_copy_resources()
ARM: OMAP2+: Drop legacy struct omap_hwmod_addr_space
ARM: OMAP2+: Drop omap_hwmod_dma_info
ARM: OMAP2+: Drop omap_hwmod_irq_info
ARM: OMAP4: Remove legacy IRQ for PRM
ARM: OMAP3: Remove legacy IRQ for PRM
bus: ti-sysc: Add minimal TI sysc interconnect target driver
ARM: OMAP2+: Populate legacy resources for dma and smartreflex
ARM: OMAP2+: Parse module IO range from dts for legacy "ti,hwmods" support
ARM: dts: Configure SmartReflex only to idle the interconnect target module
ARM: dts: Add nodes for missing omap4 interconnect target modules
dt-bindings: bus: Minimal TI sysc interconnect target module binding
ARM: dts: Add missing hwmod related properties for dra7
ARM: dts: Add missing hwmod related nodes for am33xx
ARM: dts: Add missing dma hwmod property for omap5
ARM: dts: Add missing wdt3 node for omap4
ARM: dts: Add missing hsi node for omap4
ARM: dts: Add missing onewire node for omap4
...
Pull "non-urgent device tree fixes for omaps for v4.15 merge window"
from Tony Lindgren
Non-urgent device tree fixes for omaps that can all wait for v4.15
merge window.
Turns out that we have many devices working just because we have
the legacy platform data still around. This is mostly an issue
for omap4, other SoCs just have minimal fixes needed.
As many of the missing device tree nodes and properties are for
devices that have no drivers in the mainline kernel, such as
slimbus, iss, mcasp, aess, fdif and gpu, we might as well start
using the new "ti,sysc" interconnect target module binding for
them so we can get the devices with no child device drivers idled.
This also makes it possible to drop unnecessary platform data
in later patches.
* tag 'omap-for-v4.15/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix typo for omap4 mcasp rx path
ARM: dts: Configure SmartReflex only to idle the interconnect target module
ARM: dts: Add nodes for missing omap4 interconnect target modules
dt-bindings: bus: Minimal TI sysc interconnect target module binding
ARM: dts: Add missing hwmod related properties for dra7
ARM: dts: Add missing hwmod related nodes for am33xx
ARM: dts: Add missing dma hwmod property for omap5
ARM: dts: Add missing wdt3 node for omap4
ARM: dts: Add missing hsi node for omap4
ARM: dts: Add missing onewire node for omap4
ARM: dts: Add missing smartreflex node and binding for omap4
ARM: dts: Add missing hwmods property for omap4 dma
ARM: dts: Add missing properties for omap4 control modules
ARM: dts: Configure pmu without interrupt for omap4430
ARM: dts: Add missing dma hwmods property for omap3
Pull "Rockchip dts32 updates for 4.15 part1" from Heiko Stübner:
One new board the Vyasa from Amarula Solutions using a rk3288
and core lvds node for the newly added driver+binding.
Also bindings + nodes for the Mali-Utgard GPUs found on some
Rockchip socs like rk3036 and rk3188. With the recently revived
Lima project they can even render a red triangle to a png file.
* tag 'v4.15-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Enable thermal on rk3288-vyasa board
ARM: dts: rockchip: fix mali400 ppmmu interrupt names
ARM: dts: rockchip: Enable mali GPU node on rk3288-vyasa
ARM: dts: rockchip: enable gpu on rk3188-radxarock
ARM: dts: rockchip: add gpu nodes on rk3066/rk3188
ARM: dts: rockchip: add rk322x gpu node
ARM: dts: rockchip: enable the gpu on rk3036-kylin boards
ARM: dts: rockchip: add rk3036 gpu node
dt-bindings: gpu: mali-utgard: add optional power-domain reference
dt-bindings: gpu: mali-utgard: add optional supply regulator
dt-bindings: gpu: mali-utgard: Add Rockchip Utgard Malis
ARM: dts: rockchip: enable vops and hdmi output on rk3288-vyasa
ARM: dts: rockchip: Add rk3288 vyasa board
dt-bindings: Add vendor prefix for Amarula Solutions
ARM: dts: rockchip: add LVDS node for rk3288
Pull "STM32 DT updates for v4.15, round 1" from Alexandre Torgue:
Highlights:
----------
-Add I2C1 support on STM32F746 SoC
-Enable I2C1 on STM32F746 eval board
-Add Timers support on STM32F746 SoC
-Add USB HS and FS supports on STM32F746 Soc
-Enable USB HS on STM32F746 disco and eval boards
-Enable USB FS en STM32F746 disco board
-Add Vrefbuf to STM32H743 SoC
-Add LPTIMERS support on STM32H743 SoC
-Add DMAMUX support on STM32H743 SoC
-Enable STM32H743 clock driver
-Add MDMA support on STM32H743 SoC
-Change pinctrl pinmux entries for all SoC.
* tag 'stm32-dt-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: Add MDMA support for STM32H743 SoC
ARM: dts: stm32: Enable USB FS on stm32f746-disco
ARM: dts: stm32: Add USB FS support for STM32F746 MCU
ARM: dts: stm32: Enable USB HS on stm32f746-disco
ARM: dts: stm32: Enable USB HS on stm32746g-eval
ARM: dts: stm32: Add USB HS support for STM32F746 MCU
ARM: dts: stm32: change pinctrl bindings definition
ARM: dts: stm32: Enable STM32H743 clock driver
ARM: dts: stm32: fix hse clock frequency on STM32H743 Eval board
ARM: dts: stm32: add Timers driver for stm32f746 MCU
ARM: dts: stm32: Add DMAMUX support for STM32H743 SoC
ARM: dts: stm32: Add lptimer definitions to stm32h743
ARM: dts: stm32: add vrefbuf to stm32h743
ARM: dts: stm32: Add I2C1 support for STM32F746 eval board
ARM: dts: stm32: Add I2C1 support for STM32F746 SoC
Pull "Samsung DTS ARM changes for 4.15" from Krzysztof Kozłowski:
1. Add new board: Hardkernel Odroid HC1.
2. Fix incomplete Odroid-XU3/4 thermal-zones definition leading to
possible overheat if first pair of A7+A15 cores is idle but rest of
CPUs are busy.
3. Add capacity-dmips-mhz properties for CPUs of octa-core SoCs.
4. Add power button to Odroid XU3/4.
5. Improvements in Gscaler, HDMI and Mixer blocks on Exynos5.
6. Add suspend quirk to DWC3 USB controller to fix enumeration of
SuperSpeed devices on Odroid XU4.
7. Add HDMI and MHL to Trats2.
8. Cleanups (redundant properties and nodes).
* tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: samsung: Document binding for new Odroid HC1 board
ARM: dts: exynos: Add HDMI and Sil9234 to Trats2 board
ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board
ARM: dts: exynos: Move audio clocks configuration to odroidxu3-audio.dtsi
ARM: dts: exynos: Add dwc3 SUSPHY quirk
ARM: dts: exynos: Add status property to Exynos 542x Mixer nodes
ARM: dts: exynos: Add status property to Exynos 5250 HDMI and Mixer nodes
ARM: dts: exynos: Cleanup HDMI DCC definitions on Exynos5250 and Exynos542x boards
ARM: dts: exynos: Move HDMI PHY node from boards to exynos5250.dtsi
ARM: dts: exynos: Use specific compatibles for proper Gscaler limits on Exynos5250 and Exynos5420
ARM: dts: exynos: Remove redundant interrupt properties in gpio-keys on Odroid boards
ARM: dts: exynos: Add power button for Odroid XU3/4
ARM: dts: exynos: Remove the display-timing and delay from Rinato
ARM: dts: exynos: add exynos5422 cpu capacity-dmips-mhz information
ARM: dts: exynos: add exynos5420 cpu capacity-dmips-mhz information
ARM: dts: exynos: fix incomplete Odroid-XU3/4 thermal-zones definition
Pull "DaVinci DT updates for v4.15" from Sekhar Nori:
Add support for accessing DSP on DA850 SoC when using
device-tree.
* tag 'davinci-for-v4.15/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: da8xx-dt: Add OF_DEV_AUXDATA entry for DSP clock matching
ARM: dts: da850-lcdk: Add and enable CMA reserved pool for DSP
ARM: dts: da850: Add DSP node
The Faraday TVE200 is present in the Gemini SoC, sometimes
under the name "TVC". Add it to the SoC DTSI file along with
its resources.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Renesas ARM Based SoC DT Updates for v4.15" from Simon Horman:
* r7s72100 (RZ/A1) Peach board
- Add pin groups for SCIF2 serial debug interface and Ethernet
This avoids relying on bootloader settings
- Support control of LED1 using gpio-leds
* r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
- Add MSIOF[012] support and define aliases for spi[0123]
* r8a7743 (RZ/G1M) SoC
- Add I2C and IIC core nodes
* r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform
- Enable SDHI1 SD controller supporting high-speed and SDR50 transfers
- Add chosen node to allow correct selection of serial console
and the kernel command line
- Enable RTC support
- Enable USB2.0 host support
This includes enabling USB PHY and internal PCI
* r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven and
r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoMs
- Enable Add SPI NOR support
This devices is used to boot up the system to the SoM DT
* r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM
- Enable SDHI0 SD controller supporting high-speed transfers
* r8a7745 (RZ/G1E) iW-RainboW-G22D development platform
- Add pnctl support for scif4
This avoids reling on boot loader settings
- Add EtherAVB support
* r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoM
- Add basic SoM support
- Enable MMCIF eMMC support
- Enable RTC support
- Enable SDHI1 SD controller supporting high-speed transfers
* r8a779[0-4] R-Car Gen2 SoCs
- Add reset control properties
Geert Uytterhoeven says:
This patch series describes the reset topology on all R-Car Gen2 Socs,
like was done before for R-Car Gen3 and RZ/G1.
Resets usually match the corresponding module clocks. Exceptions are:
- The audio module has resets for the Serial Sound Interfaces only,
- The display module has only a single reset for all DU channels, but
adding reset properties for the display is postponed upon request
from Laurent.
- Convert to new CPG/MSSR bindings
Geert Uytterhoven says:
Currently Renesas R-Car Gen2 SoCs use the common clk-rcar-gen2,
clk-mstp, and clk-div6 drivers, which depend on most clocks being
described in DT. Especially the module (MSTP) clocks are cumbersome
and error prone, due to 3 arrays (clocks, clock-indices, and
clock-output-names) to be kept in sync. In addition, the clk-mstp
driver cannot be extended easily to also support module resets, which
are provided by the same hardware module.
Hence when developing support for R-Car Gen3 SoCs, another approach
was chosen, which led to the CPG/MSSR driver core, and SoC-specific
subdrivers (initially for R-Car Gen3, but later also for RZ/G1).
This series converts the various R-Car Gen2 DTSes to migrate to the
new CPG/MSSR drivers that were added in v4.13-rc1.
* r8a779[0,1,3,4] R-Car Gen2 SoCs
- Stop grouping clocks under a "clocks" subnode
Geert Uytterhoeven says:
The current practice is to not group clocks under a "clocks" subnode,
but just put them together with the other on-SoC devices.
Hence this patch series implements this for the various R-Car Gen2
DTSes that still need this (r8a7792.dtsi is OK).
* r8a7794 (E2) Alt board
- Correct inverted sense of SD wip pins
* tag 'renesas-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (48 commits)
ARM: dts: r8a7743: Add MSIOF[012] support
ARM: dts: r8a7745: Add MSIOF[012] support
ARM: dts: iwg22d: Enable SDHI0 controller
ARM: dts: iwg22m: Add SPI NOR support
ARM: dts: r8a7745: Add QSPI support
ARM: dts: iwg20m: Add SPI NOR support
ARM: dts: r8a7743: Add QSPI support
ARM: dts: iwg22m: Enable SDHI1 controller
ARM: dts: r8a7745: Add SDHI controllers
ARM: dts: r8a7794: Add reset control properties
ARM: dts: r8a7793: Add reset control properties
ARM: dts: r8a7792: Add reset control properties
ARM: dts: r8a7791: Add reset control properties
ARM: dts: r8a7790: Add reset control properties
ARM: dts: r8a7743: Add IIC cores to dtsi
ARM: dts: alt: use correct logic for SD WP pins
ARM: dts: iwg20d-q7: Enable USB PHY
ARM: dts: iwg20d-q7: Enable internal PCI
ARM: dts: r8a7743: Link PCI USB devices to USB PHY
ARM: dts: r8a7743: Add USB PHY DT support
...
Pull "DTS updates for the Integrator PCIv3 driver" from Linus Walleij:
These are the DTS file changes required to fix bugs and satisfy
requirements for the new PCIv3 driver in the PCI subsystem.
The binding changes have been merged to the PCI tree.
[arnd] Note: this is an incompatible DT binding change, so things
will break during bisection or when using an old dtb file.
Since integrator has no real users, we can make an exception
for that.
* tag 'integrator-pciv3-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: Update Integrator/AP PCI v3 compatible
ARM: dts: integratorap: Fix PCI windows
ARM: dts: add the PCI clock to the device tree
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using
the following command:
perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*'
Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some
occurrences of uppercase hex.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"interrupt-parent" property is declared in root node, so it is global
to all nodes. This property is re-declared in few sub-nodes. To avoid
duplication this property is removed from following sub-nodes:
pmu, amba@0, amba@0/ethernet.
Signed-off-by: Surender Polsani <surenderp@techveda.org>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds interrupt-names property in audio node so that
binding can be agnostic of the IRQ order.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This patch adds board related config for MT2701 pwm backlight.
Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This patch adds the device node for MT2701 pwm backlight.
Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
These platforms provide a clock to their watchdog, in each
case this is the peripheral clock (PCLK), so explicitly
name the clock in the device tree.
Take this opportunity to add the "faraday,ftwdt010"
compatible as fallback to the watchdog IP blocks.
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix the legacy PCI interrupt numbers for i.MX7. The numbers were
wrongly coded in an inverted order than what Reference Manual tells.
It causes problem for PCI devices using legacy interrupt.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZ5F/UAAoJEFBXWFqHsHzOQCwH/3SfH9+Akv0M0noDacXyzD+2
MvQGppmagSl8TNeeP0kYc7wk2TeuYc24LJyEAR5xhDwkxL5LGLbXtMr5LqxJszcB
smQqS9MHpyuIboepw3xBcDBi+vOy9fmrLv7WUnM3yEXWh6gR6VYYU0D4jK/xYmUo
urH0j8etj5sao02s7D3O0iSEvaxIxtjOHB6i9fCcHNtJXo7iw2lv0XhyQhE73IX2
LFkRCdtj8EBb+gjPQrXMUE0gn67mvxuzwOOVunEGwl/13cI3WQoRh7pugTB7NBNQ
fVyBW/8TLOqkKjPinqbnyMVdS1rwel+pfC2Q8jVnjfGNjrmnCxWbcR4R8YqQJsw=
=+4ri
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Pull "i.MX fixes for 4.14" from Shawn Guo:
- Fix the legacy PCI interrupt numbers for i.MX7. The numbers were
wrongly coded in an inverted order than what Reference Manual tells.
It causes problem for PCI devices using legacy interrupt.
* tag 'imx-fixes-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx7d: Invert legacy PCI irq mapping
Two device tree related fixes:
- One on Armada 38x using a other compatible string for I2C in order
to cover an errata.
- One for Armada 7K/8K fixing a typo on interrupt-map property for
PCIe leading to fail PME and AER root port service initialization
And the last one for the mbus fixing the window size calculation when
it exceed 32bits
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWeDbriMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71RAJAJ9TyT+GrMdf
HsM7V74bSWYAUlWZ0ACcCWjIdnbVlinP+iuVS462du4HpU0=
=2AQR
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-4.14-2' of git://git.infradead.org/linux-mvebu into fixes
Pull "mvebu fixes for 4.14 (part 2)" from Gregory CLEMENT
Two device tree related fixes:
- One on Armada 38x using a other compatible string for I2C in order
to cover an errata.
- One for Armada 7K/8K fixing a typo on interrupt-map property for
PCIe leading to fail PME and AER root port service initialization
And the last one for the mbus fixing the window size calculation when
it exceed 32bits
* tag 'mvebu-fixes-4.14-2' of git://git.infradead.org/linux-mvebu:
bus: mbus: fix window size calculation for 4GB windows
ARM: dts: Fix I2C repeated start issue on Armada-38x
arm64: dts: marvell: fix interrupt-map property for Armada CP110 PCIe controller
- one DT phy address fix for the new sama5d27 som1 ek
- two DT ADC patches that were forgotten while moving to
hardware triggers for sama5d2 (iio changes already applied)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZ24QUAAoJEAf03oE53VmQHGAIAJcmiYj0qsO8ModMQjFSBR6Q
YW/7r8TAvJDgABWdu1RcpBFhGuZepYEBNToDtYAP/fLWJ14s0PqpJFM0JKZWUh4Q
SsX6zKuUcER09QyvFRmRRtF6HlyL/X84Rkf6wUfNvdaUOEUNF4qotG/6281ZlHxF
+RdKQkvx6Tv9oZAKyk9dwiYj6YtmGhZ4JQNoj+4yCqQ+ImLVlbfkLGMSPIzE1/KO
3+crrYTFl+hFcy+66hFgMz7RvbH0k+6djBkg2PDV1aD2EklStP6V98Wpxwm+fYhz
ka2Up5w+aDlp5Snif7+pH6oP0A1FvveTlv3t1wp3q9B2iqF7Ps4A+9J1L7p0n/4=
=W4R5
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes
Fixes: second batch for 4.14:
- one DT phy address fix for the new sama5d27 som1 ek
- two DT ADC patches that were forgotten while moving to
hardware triggers for sama5d2 (iio changes already applied)
* tag 'at91-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: dts: at91: sama5d2: add ADC hw trigger edge type
ARM: dts: at91: sama5d2_xplained: enable ADTRG pin
ARM: dts: at91: at91-sama5d27_som1: fix PHY ID
please pull the following:
- Loic fixes the console path on the Raspberry Pi 3 which was not correctly set
and would cause all sorts of confusion between the Bluetooth controller and the
kernel console
-----BEGIN PGP SIGNATURE-----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=GeQi
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.14/devicetree-fixes' of http://github.com/Broadcom/stblinux into fixes
Pull "Broadcom devicetree fixes for 4.14" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoC Device Tree fixes for 4.14,
please pull the following:
- Loic fixes the console path on the Raspberry Pi 3 which was not correctly set
and would cause all sorts of confusion between the Bluetooth controller and the
kernel console
* tag 'arm-soc/for-4.14/devicetree-fixes' of http://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Fix console path on RPi3
Enable the CEC controller on Jetson TK1 so that it can be used to
communicate with CEC devices via the HDMI connector.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for the Tegra CEC IP to the Tegra124 DTSI and link it to the
HDMI controller via phandle.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add node for xhci. Boards DT files will enable it if needed.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Various A10-based development boards have standard HDMI connectors
wired to the dedicated HDMI pins on the SoC.
Enable the display pipeline and HDMI output on boards I have or have
access to schematics:
- Cubieboard
- Olimex A10-OLinuXino-LIME
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
All the A20 devices I own have standard HDMI connectors wired
to the dedicated HDMI pins on the SoC:
- Bananapi M1+
- Cubieboard 2
- Cubietruck
- Lamobo R1 (or Bananapi R1)
Development boards from Olimex also have standard HDMI connectors.
Schematics for them are publicly available. Enable HDMI on them as
well.
- Olimex A20-OLinuXino-LIME
- Olimex A20-OLinuXino-LIME2
- Olimex A20-OLinuXino-MICRO
Enable the display pipeline and HDMI output for them.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Priit Laes <plaes@plaes.org> # Cubietruck, A20-OLinuXino-MICRO
Tested-by: Olliver Schinagl <oliver@schinagl.nl> # A20-OLinuXino-LIME2
Tested-by: Jonathan Liu <net147@gmail.com> # A20-OLinuXino-LIME
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A20 has two interconnected display pipelines, mirroring the A10.
Add all the device nodes for them, including the downstream HDMI
controller that we already support.
Signed-off-by: Jonathan Liu <net147@gmail.com>
[wens@csie.org: Squashed in HDMI and provided commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A10 has two interconnected display pipelines, much like the A31,
but without the DRCs between the backend and TCONs.
Add all the device nodes for them, including the downstream HDMI
controller that we already support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The R40 SoC has a watchdog like the one on A20, in the timer memory zone
(which is also the same on A20).
Add the device tree node for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add usb otg support for rk3288-vyasa, board support usb1 otg
power through otg_vbus_drv and naming conversion followed
as per schematic.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add usb host support for rk3288-vyasa, board support hub power
through phy_pwr_en and usb2 host power through usb2_pwr_en and
naming conversion followed as per schematic.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the external clock-reference, enable the gmac node
and define the phy-related pin settings.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add supporting regulators for rk3288-vyasa board, dc12_vbat is
parent regulatorand followed regulators as are child regulators.
regulator naming conversion followed as per schematic for better
readability and easy for identification.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rk808, SWITCH_REG1 has configured for sdmmc regulator as vcc_sd,
so use the same by renaming vcc33_sd to vcc_sd(as per schematic)
and drop explicit regulator definition from root.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
vdd_log, never used on DCDC_REG1 of rk808 from latest schematic so
remove the same and update the regulator-name as 'vdd_arm' to sync
with existing rk3288 board dts files.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add thermal zone and dynamic CPU power coefficients for RV1108
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add tsadc needed main information for RV1108 SoC.
750000Hz is the max clock rate supported by tsadc module.
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds the USB pins and nodes for USB FS core on STM32F746 SoC.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This patch adds the USB pins and nodes for USB HS core on STM32F746 SoC.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Initially each pin was declared in "include/dt-bindings/stm32<SOC>-pinfunc.h"
and each definition contained SOC names (ex: STM32F429_PA9_FUNC_USART1_TX).
Since this approach was approved, the number of supported MCU has
increased (STM32F429/STM32F469/STM32f746/STM32H743). To avoid to add a new
file in "include/dt-bindings" each time a new STM32 SOC arrives I propose
a new approach which consist to use a macro to define pin muxing in device
tree. All STM32 will use the common macro to define pinmux. Furthermore, it
will make STM32 maintenance and integration of new SOC easier .
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Vikas MANOCHA <vikas.manocha@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Fix HSE frequency to 25Mhz for STM32H743 Eval Board
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add Timers and it sub-nodes into DT for stm32f746 family.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add lptimer definitions, depending on features they provide:
- lptimer1 & 2 can act as PWM, trigger and encoder/counter
- lptimer3 can act as PWM and trigger
- lptimer4 & 5 can act as PWM
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Improve hardware description by adding a clock property to the device
node corresponding to the CA9 CPU core.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Improve hardware description by adding clocks properties to the device
nodes corresponding to the CA9 CPU cores.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Currently only the primary CPU in the CA7 cluster has a clocks property,
while the secondary CPU core is driven by the same clock.
Add the missing clocks property to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Currently only the primary CPU in the CA15 cluster has a clocks
property, while the secondary CPU core is driven by the same clock.
Add the missing clocks property to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Currently only the primary CPU in the CA15 cluster has a clocks
property, while the secondary CPU core is driven by the same clock.
Add the missing clocks property to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Currently only the primary CPU in the CA15 cluster has a clocks
property, while the secondary CPU core is driven by the same clock.
Add the missing clocks property to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Currently only the CPU cores in the CA15 cluster have clocks properties.
Add the missing clocks properties for the CPU cores in the CA7 cluster
to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Currently only the primary CPU in the CA15 cluster has a clocks
property, while the secondary CPU cores are driven by the same clock.
Add the missing clocks properties to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Improve hardware description by adding clocks properties to the device
nodes corresponding to the CA9 CPU cores.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Improve hardware description by adding a clock property to the device
node corresponding to the CA9 CPU core.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Currently only the primary CPU in the CA15 cluster has a clocks
property, while the secondary CPU core is driven by the same clock.
Add the missing clocks property to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Improve hardware description by adding a clocks property to the device
node corresponding to the primary CA15 CPU core, which is for now the
only one described.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7794 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7793 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7792 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7791 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7790 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7743 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use newly added R-Car GPIO Gen1 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in DT of r8a7779 SoC.
As the driver does not match on "renesas,gpio-r8a7779" there
are some run-time considerations for this patch:
* When a resulting DTB is used with kernels newer than v4.14 this should
not have any run-time effect as renesas,rcar-gen1-gpio is matched by the
driver since commit dbd1dad2ab ("gpio: rcar: add gen[123] fallback
compatibility strings")
* However, when used with older kernels GPIO will be disabled as
no compat string match will be made by the driver.
The regression documented above for the new DTB with old kernel case
is acceptable in my opinion.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use newly added R-Car GPIO Gen1 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in DT of r8a7778 SoC.
As the driver does not match on "renesas,gpio-r8a7778" there
are some run-time considerations for this patch:
* When a resulting DTB is used with kernels newer than v4.14 this should
not have any run-time effect as renesas,rcar-gen1-gpio is matched by the
driver since commit dbd1dad2ab ("gpio: rcar: add gen[123] fallback
compatibility strings")
* However, when used with older kernels GPIO will be disabled as
no compat string match will be made by the driver.
The regression documented above for the new DTB with old kernel case
is acceptable in my opinion.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fix warnings like follows:
Warning (node_name_chars_strict): Character '_' not recommended in ...
Commit 8654cb8d03 ("dtc: update warning settings for new bus and
node/property name checks") says these checks are a bit subjective,
but Rob also says to not add new W=2 warnings.
The exising warnings should be fixed in order to catch new ones
easily.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add nodes of thermal monitor and thermal zone for UniPhier PXs2 SoC.
The thermal monitor node is included in sysctrl. Since the efuse might not
have a calibrated value of thermal monitor, this patch gives the default
value for PXs2.
Furthermore, add cpuN labels for reference in cooling-device property.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Enable thermal on rk3288-vyasa board, TSHUT is high active.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to i.MX7D reference manual (Rev. 0.1, table 7-1, page 1221)
legacy PCI interrupt mapping is as follows:
- PCIE INT A is IRQ 122
- PCIE INT B is IRQ 123
- PCIE INT C is IRQ 124
- PCIE INT D is IRQ 125
Invert the mapping information in corresponding DT node to reflect
that.
Cc: yurovsky@gmail.com
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Fixes: a816d5750e ("ARM: dts: imx7d: Add node for PCIe controller")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
It is not recommended to place the regulator nodes inside 'simple-bus',
so adjust them accordingly.
The motivation for rearranging this is to make it easier to add new
regulator nodes in the future.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The current GPL only licensing on the dts file makes it very
impractical for other software components licensed under another
license.
In order to make it easier for them to reuse our device trees,
relicense our dts files first under a GPL/X11 dual-license.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As reported by Peter Ujfalusi <peter.ujfalusi@ti.com>, the rx path on macsp
is disabled and only tx is usable if the davinci-mcasp driver is updated for
it.
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Contrary to later i.MX SoCs, the parallel display interface pad groups on
i.MX51 are called DISP1 and DISP2 in the Reference Manual, not DISP0 and
DISP1.
Fix this inconsistence by changing the DISP names in the i.mx51 dts.
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The following build warnings are seen with W=1:
Warning (unit_address_vs_reg): Node /display@di0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /display@di1 has a unit name, but no reg property
Fix all these warnings by changing 'display@diX' to 'dispX'.
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The reference design tablet has the DC jack wired to AXP209's ACIN.
As a tablet, it also has an internal LiPo battery, wired to the PMIC's
battery charger.
Enable both.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Some boards have had node names with underscores. Remove them in favour of
hyphens in order to reduce the DTC warnings.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Some node names in the A80 DTSI still have underscores in them. Remove them
in favour of hyphens to remove DTC warnings.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Some GPIO pinctrl nodes cannot be easily removed, because they would also
change the pin configuration, for example to add a pull resistor or change
the current delivered by the pin.
Those nodes still have underscores and unit-addresses in their node names
in our DTs, so adjust their name to remove the warnings. Use that occasion
to also fix some poorly chosen node-names.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The I2C's, MMC0 and EMAC controllers have only one muxing option in the
SoC. In such a case, we can just move the muxing into the DTSI, and remove
it from the DTS.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
All our pinctrl nodes were using a node name convention with a unit-address
to differentiate the different muxing options. However, since those nodes
didn't have a reg property, they were generating warnings in DTC.
In order to accomodate for this, convert the old nodes to the syntax we've
been using for the new SoCs, including removing the letter suffix of the
node labels to the bank of those pins to make things more readable.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add support for the built-in touchscreen controller present on MX25.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The following build warnings are seen with W=1:
Warning (simple_bus_reg): Node /soc/sram@00900000 simple-bus unit
address format error, expected "900000"
Warning (simple_bus_reg): Node /soc/aips-bus@02000000 simple-bus unit
address format error, expected "2000000"
Warning (simple_bus_reg): Node /soc/aips-bus@02000000/pxp@020f0000
simple-bus unit address format error, expected "20f0000"
(...)
Remove the leading zeroes from unit addresses to fix the warnings.
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The following build warnings are seen with W=1:
Warning (unit_address_format): Node /interrupt-controller@00a01000 unit
name should not have leading 0s
Warning (simple_bus_reg): Node /soc/sram@00900000 simple-bus unit address
format error, expected "900000"
Warning (simple_bus_reg): Node /soc/dma-apbh@01804000 simple-bus unit
address format error, expected "1804000"
(...)
Remove the leading zeroes from unit addresses to fix the warnings.
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On the Utilite Pro the CEC line is wired up to the HDMI connector.
Add the required pinctrl setting.
Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
HDMI_TX_CEC_LINE pin is used for CEC, so pass it in the device tree.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit c26ebe98a1 ("PCI: imx6: Add regulator support"), it is
possible to pass the 'vpcie-supply' property to describe the PCIE supply.
This way we can remove the 'regulator-always-on' property from the
regulator and have a better device tree description.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for can1 and can2 nodes on Engicam i.CoreM6 RQS
QDL module boards.
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
max11801 touchscreen on Engicam iCoreM6 DualLite/Solo module is
connected via i2c1, so add max11801: touchscreen@48 on i2c1.
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch replace fsl,imx-audio-sgtl5000 and use simple-audio-card
for Engicam i.CoreM6 RQS QDL platform boards.
This patch also fix, pinctrl_adumux.
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx6q, imx6dl icore-rqs modules share common sound nodes,
so move the sound nodes from imx6q-icore-rqs into dtsi so-that
both can share the common node details.
And also replace codec: sgtl5000@0a => sgtl5000: codec@a
on imx6q-icore-rqs.dts to [label:] node-name[@unit-address]
according to devicetree specification from ePAPER v1.1
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Linux Sound card now uses generic simple-audio-card, so add
the same along with related audmux and codec(via u2c3) for
i.CoreM6 QDL module boards.
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add basic board support for the Ubiquiti UniFi Switch 8 port model. This
is a small home and office use managed switch based on the BCM53342
switching control SoC.
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Describe the Broadcom Hurricane 2 SoC comprised of a Cortex-A9 CPU
complex along with standard iProc peripherals:
* timers
* SPI controller
* NAND controller
* a single AMAC (Ethernet MAC controller)
* dual PCIe controllers
The design is largely similar to existing iProc-based SoCs such as
Northstar Plus.
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable ostm0 and ostm1 timers to be used as clock source and clockevent
source. The timers provides greater accuracy than the already enabled
mtu2 one.
With these enabled:
clocksource: ostm: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns
sched_clock: 32 bits at 33MHz, resolution 30ns, wraps every 64440619504ns
ostm: used for clocksource
ostm: used for clock events
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Suggested-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds DMA properties to the HSUSB node.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable HS-USB device for the iWave G20D-Q7 carrier board based on
RZ/G1M.
Also disable the host mode support on usb otg port by default to avoid
pin conflicts.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the R8A7743 generic part of the HS-USB device node. It is up to the
board file to enable the device.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers
attached to them.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe the PCI USB devices that are behind the PCI bridges, adding
necessary links to the USB PHY device.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the r8a7745 generic part of the USB PHY device node.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The following 'capacity-dmips-mhz' dt property values are used:
Cortex-A15: 1024, Cortex-A7: 539
They have been derived form the cpu_efficiency values:
Cortex-A15: 3891, Cortex-A7: 2048
by scaling them so that the Cortex-A15s (big cores) use 1024.
The cpu_efficiency values were originally derived from the "Big.LITTLE
Processing with ARM Cortex™-A15 & Cortex-A7" white paper
(http://www.cl.cam.ac.uk/~rdm34/big.LITTLE.pdf). Table 1 lists 1.9x
(3891/2048) as the Cortex-A15 vs Cortex-A7 performance ratio for the
Dhrystone benchmark.
The following platform is affected once cpu-invariant accounting
support is re-connected to the task scheduler:
r8a7790-lager
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Meson6, Meson8 and Meson8b are using the same MMC controller IP. This
adds the MMC controller node to meson.dtsi so it can be used by all
SoCs.
The controller itself is a bit special, because it has multiple slots.
Each slot is accessed through a sub-node of the controller. However,
currently the driver for this hardware only supports one slot.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Remove pin offset on the AO controller. meson pinctrl no longer has
this quirk
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This introduces the usb node which can be used e.g. for USB_ETH
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This introduces the eMMC sdhci node and its pinctrl state
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The voltages are pulled from the vendor source tree.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This introduces the gpio-keys nodes for keys of the FP2 and the
associated pinctrl state.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This DTS has support for the Fairphone 2 (codenamed FP2).
This first version of the DTS supports just the serial console via the
MSM UART pins.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This adds the GSBI6 and GSBI7 IO blocks to the MSM8660 DTSI file.
On the APQ8060 DragonBoard, GSBI6 DM is used for Bluetooth UART,
and GSBI7 I2C is used for FM radio I2C.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This adds a basic DTS file for the Sony Xperia Z2 Tablet, containing
definitions for regulators, eMMC/SD-card, USB, WiFi, Touchscreen,
charger, backlight, coincell and buttons.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch marks gsbi i2c node at soc level dtsi, so that kernel
would not assume that its enabled and result in pin conflicts on
some boards like IFC6410 which do use these pins for uart.
Without this patch we see below pin conflict:
apq8064-pinctrl 800000.pinctrl: pin GPIO_16 already requested by
16540000.serial; cannot claim for 16580000.i2c
apq8064-pinctrl 800000.pinctrl: pin-16 (16580000.i2c) status -22
apq8064-pinctrl 800000.pinctrl: could not request pin 16 (GPIO_16)
from group gpio16 on device 800000.pinctrl
i2c_qup 16580000.i2c: Error applying setting, reverse things back
i2c_qup: probe of 16580000.i2c failed with error -22
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the necessary #phy-cells property to the DSI and HDMI
phys.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
The devicetree prefix mcp is deprecated in favour of microchip. Thus
this replaces mcp with microchip for the mcp23017 gpio expander chip.
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Move the pcie_rc node to common file so that it can be
used by dra76-evm as well.
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
As per recent TRM, PBIAS cell on omap5 devices supports
3.3v and not 3.0v as documented earlier.
Update PBIAS regulator max voltage to match this.
Document reference:
SWPU249AF - OMAP543x Technical reference manual August 2016
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
As per recent TRM, PBIAS cell on dra7 devices supports
3.3v and not 3.0v as documented earlier.
Update PBIAS regulator max voltage to match this.
Document reference:
SPRUI30C – DRA75x, DRA74x Technical reference manual- November 2016
Tested on:
DRA75x PG 2.0 REV H EVM
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
All the A31/A31s devices I own have some kind of HDMI connector wired
to the dedicated HDMI pins on the SoC:
- A31 Hummingbird (standard HDMI connector, display already enabled)
- Sinlinx SinA31s (standard HDMI connector)
- MSI Primo81 tablet (micro HDMI connector)
Enable the display pipeline (if needed) and HDMI output for them.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Now that we support the HDMI controller on the A31 SoC, we can add it
to the device tree.
This adds a device node for the HDMI controller, and the of_graph nodes
connecting it to the 2 TCONs.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The TRM has marked dra7 SmartReflex as reserved and we should not
touch those registers as pointed out by Nishanth Menon <nm@ti.com>.
We do still want to idle the related interconnect target modules on
init though.
Let's do this by only configuring the generic interconnect target modules
and not add the child SmartReflex devices.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
On omap4 we are missing dts nodes for several interconnect target
modules that we are idling on init. This currently works with the
legacy platform data still around.
To fix this, let's add the interconnect target modules so we can
idle the unused interconnect target module on init.
Also note that adding the interconnect target module node does not
necessarily mean that there is a driver available for the child IP
block, or that the child IP block is even functional.
In the SGX case, the PowerVR driver is closed source. And McASP on
omap4 has at least the TX path disabled and is not supported by the
davinci-mcasp driver. For AESS there is old Android 3.4 kernel
driver available.
For smarflex, we are still probing with platform data and the
driver needs more work before we can add the device ip child nodes.
And finally, we're not yet using the interconnet ranges. I will
be posting separate patches for those later on.
Cc: Benoît Cousson <bcousson@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Nishanth Menon <nm@ti.com>
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
K2G EVM has n25q128a13 SPI NOR flash on SPI1. Enable SPI1 in the DT
node as well as add a subnode for the SPI NOR.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Add nodes for the various SPI instances.
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Enable PWM ECAP0 which will be used for display backlight.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Enable USB 0 which will be used as a host port and USB 1 which will be
used in peripheral mode.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Add nodes for both USB instances supported by 66AK2G.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
K2G EVM has an onboard I2C EEPROM connected to I2C0. This patch adds
the necessary DT entry for the AT24CM01 EEPROM.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Add nodes for the various I2C instances.
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Use DMA for USART0 (which is used as ttyS1) as we have enough channels and to
show how to specify DMA use with serial nodes.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Add the PWM0 interface and one output of channel 0 (on PC10) on this headless
board. The output conflicts with LCD and ISI, so only enable it for this
particular board of the series (ISI is enabled on at91sam9g25ek, as an example
but we can do the other way around).
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
As the CAN1 interface is not multiplexed with other peripherals on this
board, enable it so that it can be tested more easily.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
As the board have the proper pull-ups soldered on the data and CMD
lines we don't need them specified in the PADs. So remove the
"bias-pull-up" property and set "bias-disable".
This will also save some power.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[claudiu.beznea@microchip.com: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Add pin muxing for pwm0 and set it as disabled since it is in conflict
with pins for leds.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Set the PB_USER button as a wakeup source to resume from ulp0 mode.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
[claudiu.beznea@microchip.com: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
As the board have the proper pull-ups soldered on the data
and CMD lines we don't need them specified in the PADs. So remove
the "bias-pull-up" property and set "bias-disable".
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[claudiu.beznea@microchip.com: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
CAN0 is not connected on the sama5d27_som1_ek board, so remove
it from DT.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[claudiu.beznea@microchip.com: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Add pin muxing for pwm0 and set it as disabled since it is in conflict
with the pins for leds.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Set the USER button as a wakeup source to allow wakeup from ULP0.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
[claudiu.beznea@microchip.com: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Overwrite sama5d2.dtsi aliases node to match the at91-sama5d27_som1_ek
board configuration. ttyS0 stands for DBGU, ttyS1 for the mikro BUS 1
serial lines and ttyS2 for the mikro BUS 2 serial lines.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
[claudiu.beznea@microchip.com: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Add disabled statuses for all devices and for those those which pins
are in conflict with other devices add a comment in the DT file to specify
this.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The interrupts were wrongly named as ppXmmu while the binding
specifies them as ppmmuX.
Fix that for the recently added Utgard mali nodes on Rockchip socs.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is BCM53573 WiSoC based outdoor access point with an extra BCM43217
chipset used for 2.4 GHz.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This is BCM53573 WiSoC based access point with an extra BCM43217 chipset
used for 2.4 GHz.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
board design.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
board design.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add HDMI and Sil9234 MHL converter to Trats2 board.
Following in SoC devices have been enabled:
- HDMI (HDMI signal encoder),
- Mixer (video buffer scanout device),
- I2C_5 bus (used for HDMI DDC)
- I2C_8 bus (used for HDMI_PHY control).
Based on previous work by:
Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The rv3029 compatible is missing its vendor string, add it.
Also fix the node name to be a proper generic name.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
As the SAMA5D2 SDHCI controller works with an external power supply,
describe the power supply for the SD card slot. This makes it possible
to use mmc power sequences, in the case of external SDIO modules.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Add the charger device node as a sub-device of act8945a mfd, move
the charger's properties in the node, and replace the
"active-semi,irq_gpios" with the "interrupts" property to denote
the act8945a charger's irq.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Added ADTRG edge type property as interrupt edge type value
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
One of the usage of the LRADC is to implement buttons. The bindings define
that we should have one subnode per button, with their associated voltage
as a property.
However, there was no reg property but we still used the voltage associated
to the button as the unit-address, which eventually generated warnings in
DTC.
Rename the node names to avoid those warnings.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Using skeleton.dtsi will create a memory node that will generate a warning
in DTC. However, that node will be created by the bootloader, so we can
just remove it entirely in order to remove that warning.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Some gpio-keys definitions in our DTs were having buttons defined with a
unit-address and that would generate a DTC warning.
Change the buttons node names to remove the warnings.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The PHY ID is incorrect. It leads to troubles when resuming from standby
or mem power states.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: af690fa37e ("ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support")
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
This patch adds a .dtsi that describes the camera daughter board
and a .dts to describe the HW made of iWave's RZ/G1M SoM, iWave's
RZ/G1M/G1N Qseven carrier board, and the camera daughter board.
The camera daughter board .dtsi adds support for ttySC[14].
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Since the same carrier board may host RZ/G1M and RZ/G1N based
Systems on Module, the DT architecture for iwg20d-q7 needs
better decoupling. This patch provides:
* iwg20d-q7-common.dtsi - its purpose is to define the carrier
board definitions, and its content is basically the same
as the previous version of r8a7743-iwg20d-q7.dts, only it
has no reference to the SoM .dtsi, and that's why the
filename doesn't mention the SoC name any more.
* r8a7743-iwg20d-q7.dts - its new purpose is to put together
the SoM .dtsi (r8a7743-iwg20m.dtsi) and the carrier board
.dtsi defined by this very patch, along with "model" and
"compatible" properties.
The final DT architecture to describe the board is now:
r8a7743-iwg20d-q7.dts # Carrier Board + SoM
├── r8a7743-iwg20m.dtsi # SoM
│ └── r8a7743.dtsi # SoC
└── iwg20d-q7-common.dtsi # Carrier Board
and maximizes the reuse of the definitions for the carrier board
and for the SoM.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This info can be used by operating system to setup LED behavior.
Reported-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
So far, the stress-ng tool for instance quickly resulted in a silent
freeze of the system with no prior notice on a serial console when
running its filesystem or memory stressor classes.
Even with a panic-on-OOM and reboot-on-panic (vm.panic_on_oom=1,
kernel.panic=10) configured, the system would neither reboot nor
would the OOM killer get any chance to otherwise do its job.
The Amlogic reference source code uses a 2MB PHYS_OFFSET. With these 2MB
reserved via DT, stress-ng was able to run on an Odroid C1+ just fine for
several hours, the OOM killer was able to kill processes again and if
configured would successfully trigger a reboot of the system.
Fixes: 4a69fcd3a1 ("ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The SoC type and version information is encoded in different register
blocks.
The SoC type information is part of the "assist" registers.
The misc version information is part of the "bootrom" registers.
On Meson8, Meson8b and Meson8m2 there is additionally information about
the minor version. This information is stored in the "analog top"
registers.
Add the nodes for these register blocks so we can decode the SoC type
and version information.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This patch fixes the Meson6, Meson8 and Meson8b USB controllers dts nodes
which interrupts are level type instead of edge type.
This avoids errors like "usb 1-1-port1: cannot reset (err = -110)" and
similars on Odroid-C1+ board.
Fixes: e29b1cf874 ("ARM: dts: meson: add USB support on Meson8 and Meson8b")
Signed-off-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This patch enables the USB Host controller (USB1) and the relative USB2 PHY
on Odroid-C1/C1+ board.
Signed-off-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
can be probed automatically without userspace hciattach calls.
-----BEGIN PGP SIGNATURE-----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=FCYe
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3p0u
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-dt-next-2017-10-06' into devicetree/next
This pull request adds the Pi 3's built in bluetooth device so that it
can be probed automatically without userspace hciattach calls.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
RPi3, so it now comes up with no config.txt/cmdline.txt settings in
the firmware.
-----BEGIN PGP SIGNATURE-----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=5wQi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pMRq
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-dt-fixes-2017-10-06' into devicetree/next
This pull request brings in a fix for default serial console setup on
RPi3, so it now comes up with no config.txt/cmdline.txt settings in
the firmware.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add BCM43438 (bluetooth) as a slave device of uart0 (pl011/ttyAMA0).
This allows to automatically insert the bcm43438 to the bluetooth
subsystem instead of relying on userspace helpers (hciattach).
Overwrite chosen/stdout-path to use 8250 aux uart as console.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Contrary to other RPi devices, RPi3 uses uart0 to communicate with
the BCM43438 bluetooth controller. uart1 is then used for the console.
Today, the console configuration is inherited from the bcm283x dtsi
(bootargs) which is not the correct one for the RPi3. This leads to
routing issue and confuses the Bluetooth controller with unexpected
data.
This patch introduces chosen/stdout path to configure console to uart0
on bcm283x family and overwrite it to uart1 in the RPi3 dts.
Create serial0/1 aliases referring to uart0 and uart1 paths.
Remove unneeded earlyprintk.
Fixes: 4188ea2aeb ("ARM: bcm283x: Define UART pinmuxing on board level")
Signed-off-by: Loic Poulain <loic.poulain@gmail.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Use the preferred generic node name instead of the specific name.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Use the preferred generic node name instead of the specific name.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Use the preferred generic node name instead of the specific name.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Use the preferred generic node name instead of the specific name.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The board has an external pull-up on the card-detect signal, so there's no
need to add another one.
This also removes a DTC warning.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The board has an external pull-up on the card-detect signal, so there's no
need to add another one.
This also removes a DTC warning.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Our pinctrl node names were containing unit-adresses without a reg
property, resulting in a warning. Change the names for our new convention.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A80 boards still define some GPIO pinctrl nodes that are not really
useful, and redundant with the muxing already happening on gpio_request.
Let's remove those nodes. This will also remove DTC warnings.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Using skeleton.dtsi will create a memory node that will generate a warning
in DTC. However, that node will be created by the bootloader, so we can
just remove it entirely in order to remove that warning.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The gpio pinctrl nodes are redundant and as such useless most of the times.
Since they will also generate warnings in DTC, we can simply remove most of
them.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The thermal-zone subnodes we defined for the A10 have underscores in them
that will generate DTC warnings. Change those underscores for hyphens.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Our main node for all the in-SoC controllers used to have a unit name. The
unit-name, in addition to being actually false, would not match any reg
property, which generates a warning.
Remove it in order to remove those warnings.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Our oscillators clock names have a unit address, but no reg property, which
generates a warning in DTC. Change these names to remove those unit
addresses.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The simple-framebuffer nodes have a unit address, but no reg property which
generates a warning when compiling it with DTC.
Change the simple-framebuffer node names so that there is no warnings on
this anymore.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The USB power supply node in the AXP209 DTSI is using underscores in its
node name, which is generating a warning. Change those underscores for
hyphens.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Most of our device trees have had leading zeros for padding as part of
the nodes unit-addresses.
Remove all these useless zeros that generate warnings
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Banana Pi M2 Ultra is an SBC based on the Allwinner V40 SoC (same as
the R40 SoC). The form factor is similar to the Raspberry Pi series.
It features:
- X-Powers AXP221s PMIC connected to i2c0
- 1GiB DDR3 DRAM
- microSD slot
- MicroUSB Type-B port for power and connected to usb0
- HDMI output
- MIPI DSI connector
- 4 USB Type-A ports (connected to the usb1 controller via a hub)
- gigabit ethernet with Realtek RTL8211E transceiver
- WiFi/Bluetooth with AP6212 module, with external antenna connector
- SATA and power connectors for native SATA support
- camera sensor connector
- audio out headphone jack
- red and green LEDs
- debug UART pins
- Raspberry Pi B+ compatible GPIO header
- power and reset buttons
This patch adds a dts file that enables UART, MMC and PMIC support.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Banana Pi M2 Ultra is an SBC based on the Allwinner R40 SoC. The
form factor and position of various connectors, leds and buttons is
similar to the Banana Pi M1+, Banana Pi M3, and is exactly the same
as the latest Banana Pi M64.
It features:
- X-Powers AXP221s PMIC connected to i2c0
- 2 GB DDR3 DRAM
- 8 GB eMMC
- micro SD card slot
- DC power jack
- HDMI output
- MIPI DSI connector
- 2x USB 2.0 hosts
- 1x USB 2.0 OTG
- gigabit ethernet with Realtek RTL8211E transceiver
- WiFi/Bluetooth with AP6212 chip, with external antenna connector
- SATA and power connectors for native SATA support
- camera sensor connector
- consumer IR receiver
- audio out headphone jack
- onboard microphone
- red, green, and blue LEDs
- debug UART pins
- Li-Po battery connector
- Raspberry Pi B+ compatible GPIO header
- power, reset, and boot control buttons
This patch adds a dts file that enables UART, MMC and PMIC support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Allwinner R40 SoC is marketed as the successor to the A20 SoC.
The R40 is a smaller chip than the A20, but features the same set
of programmable pins, with a couple extra pins and some new pin
functions. The chip features 4 Cortex-A7 cores and a Mali-400 MP2
GPU. It retains most if not all features from the A20, while adding
some new features, such as MIPI DSI output, or updating various
hardware blocks, such as DE 2.0.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
MTU2 multi-function/multi-channel timer/counter is not enabled for
GR-Peach board. The timer is used as clock event source to schedule
wake-ups, and without this enabled all sleeps not performed through busy
waiting hang the board.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Fix 'leds' node name indent as it was wrongly aligned.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The second watchdog is left running by u-boot in the common
configurations of the firmware shipped on ASPEED boards. Ensure a driver
is loaded so the system can succcessfully boot.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The watchdog bindings do not describe an interrupt property nor clock
phandle, and the upstream driver never had code to use them. Drop them
from the device tree.
Also rename the node from wdt the more commonly used watchdog.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Shorten size of reg property so it covers only the implemented
registers
- Add VUART compatible, and change node name to serial@
- Remove outdated current-speed property. Different bootloaders use
different speeds, so this is no longer helpful
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Existing userspace expects the console (UART5) to be at /dev/ttyS4. To
ensure the UARTs show up where users expect them, we give them fixed
aliases starting at 0.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable the buses that are in use and the devices that are attached.
Currently that includes temperature measurement and EEPROM.
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable the buses that are in use and the devices that are attached.
Currently that includes the battery backed RTC, temperature measurement
and EEPROM.
Some of these buses are for hotplugged cards, such as PCIe cards.
Others do not yet have upstream drivers, so there are no devices
attached.
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable the buses that are in use and the devices that are attached.
Currently that is just the battery backed RTC.
Some of these buses are for hotplugged cards, such as PCIe cards. Others
do not yet have upstream drivers, so there are no devices attached.
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Now with an upstream i2c bus driver, we can add the 14 i2c buses that
exist in ASPEED G4 and G5 generation SoCs.
It also adds aliases for the 14 built-in I2C busses to ensure userspace
sees the numbering staring from zero and counting up.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
We try to keep the nodes in address order. The ADC node was out of
place.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Moving the subnodes out of the pinctrl node declaration to a reference
allows easier access to the remaining parts of the devicetree.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Xo Wang <xow@google.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---------------------
-Fix STMPE1600 bindings for stm32429i-eval board
-Use right compatible for stm32f469 pinctrl. It implies to use
pinctrl dedicated files for F4 SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C7yt
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into fixes
STM32 fixes for v4.14:
---------------------
-Fix STMPE1600 bindings for stm32429i-eval board
-Use right compatible for stm32f469 pinctrl. It implies to use
pinctrl dedicated files for F4 SoCs.
* tag 'stm32-dt-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: use right pinctrl compatible for stm32f469
ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board
Signed-off-by: Olof Johansson <olof@lixom.net>
Currently, same stm32f429-pinctrl driver is used for stm32f429 and
stm32f469. As pin map is different between those 2 MCUs,
a stm32f469-pinctrl driver has been recently added.
This patch
-allows to use stm32f469-pinctrl driver for stm32f469 boards
-reworks stm32 devicetree files to fit with stm32f429 / stm32f469
In the same time it fixes an issue when only MACH_STM32F469 flag is
selected in menuconfig.
Fixes: d28bcd53fa ("ARM: stm32: Introduce MACH_STM32F469 flag")
Reported-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
To declare gpio interrupt line for STMPE1600, 2 possibilities are offered:
-use gpio binding (and then the gpiolib interface inside driver)
-use interrupt binding as each gpio-controller are also interrupt controller
on stm32f429.
In STMPE 1600 node both (gpio and interrupt) bindings are defined.
This patch fixes this issue and use only interrupt binding.
Fixes: c04b2e72af ("ARM: dts: stm32: Enable STMPE1600 gpio expander of STM32F429-EVAL board")
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Few minor fixes for omaps, mostly just boot time warning fixes:
- Drop undocumented camera binding that got merged during the merge window by
accident as I applied before Sakari's comments
- Fix soft reset warning for dra7 kexec boot for gpio1 as the optional clocks
need to be enabled for reset
- Fix dra7 kexec boot clock rate for McASP as the rate is no longer the default
rate after kexec
- Fix omap3 pandora MMC warning during boot
- Add am33xx SPI alias like we have on other SoCs
- Remove node for non-existing CPSW EMAC Ethernet on am43xx-epos-evm
-----BEGIN PGP SIGNATURE-----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=abMX
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.14-rc cycle
Few minor fixes for omaps, mostly just boot time warning fixes:
- Drop undocumented camera binding that got merged during the merge window by
accident as I applied before Sakari's comments
- Fix soft reset warning for dra7 kexec boot for gpio1 as the optional clocks
need to be enabled for reset
- Fix dra7 kexec boot clock rate for McASP as the rate is no longer the default
rate after kexec
- Fix omap3 pandora MMC warning during boot
- Add am33xx SPI alias like we have on other SoCs
- Remove node for non-existing CPSW EMAC Ethernet on am43xx-epos-evm
* tag 'omap-for-v4.14/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry
ARM: dts: am33xx: Add spi alias to match SOC schematics
ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both
ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux
ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts
Signed-off-by: Olof Johansson <olof@lixom.net>
on DA850 EVM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fiWW
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
A fix for random ethernet mac address problem
on DA850 EVM.
* tag 'davinci-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-evm: add serial and ethernet aliases
Signed-off-by: Olof Johansson <olof@lixom.net>
- three DT fixes for the newly introduced sama5d27_som1_ek board
- one treewide modification that didn't touch this new PM code: we
synchronize now to be coherent with the other ARM platforms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZv+9LAAoJEAf03oE53VmQ8pwH/i8kzx5nHFyzAAmgye9WlvSQ
WSIliLLrITv3lM5YWpWuIq2y4ou8pvRmWxkb02Ih58E/A3TGsTzuvide0DgNAzOf
blrFWF0cjcMEw1RwwdbhJZlxi/5PpKAPhR8TKLeB5RBtUhdcDenp3SMIDGeK/XZK
ejJXm6OuT8NLGo69+7DbJ6/6zRlbFRe+TwehOz5afmTsRemvqf+U1k65nEwuVhLK
F9ic2ADGT7noqc6+NPtyrW5pXIEis4+hnkSTGOo0k6GWmp64fWU4Vdt+qgwqDqhl
ts81yk/sOA+nVS417AHYw5rA2VlzxpibJ/7U84QJyBNf+5gWijAhIrpORAS3FuA=
=4X2n
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes
Fixes for 4.14:
- three DT fixes for the newly introduced sama5d27_som1_ek board
- one treewide modification that didn't touch this new PM code: we
synchronize now to be coherent with the other ARM platforms
* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: at91: Replace uses of virt_to_phys with __pa_symbol
ARM: dts: at91: sama5d27_som1_ek: fix USB host vbus
ARM: dts: at91: sama5d27_som1_ek: fix typos
ARM: dts: at91: sama5d27_som1_ek: update pinmux/pinconf for LEDs and USB
Signed-off-by: Olof Johansson <olof@lixom.net>
Add default and sleep pinmux for matrix_keypad0.
Signed-off-by: Kabir Sahane <x0153567@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Odroid HC1 board is based on Odroid XU4 board, but it has no HDMI,
no eMMC, no built-in USB3.0 hub, no extension port pins, and no GPIO
button. USB3.0 ports are used for built-in JMicron USB to SATA bridge
and Gigabit R8152 ethernet chips. HC1 uses only passive cooling.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
All the Armada 38x(380, 385, 388) have a silicon issue in
the I2C controller which violates the I2C repeated start timing
(errata FE-8471889).
i2c-mv64xxx driver handles this errata based on the compatible string
"marvell,mv78230-a0-i2c".
This patch activates the "marvell,mv78230-a0-i2c" compatible string
for the I2C controller on armada-38x SoC based devices.
Signed-off-by: Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Audio subsystem clocks configuration is a part of audio block,
so there it should be moved to exynos5422-odroidxu3-audio.dtsi
to avoid it on Odroid XU4, which has no audio codec.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
With commit 8dd6666f49 ("ARM: OMAP2+: omap_hwmod: Add support for
earlycon") we can now get debug information early if something goes
wrong as long as kernel command line has earlycon in it. Let's enable
it for omap5-common as all these have debug uart at uart3.
Signed-off-by: Tony Lindgren <tony@atomide.com>
With commit 8dd6666f49 ("ARM: OMAP2+: omap_hwmod: Add support for
earlycon") we can now get debug information early if something goes
wrong as long as kernel command line has earlycon in it. Let's enable
it for pandaboards as they all have a debug uart at uart3.
Signed-off-by: Tony Lindgren <tony@atomide.com>
With commit 8dd6666f49 ("ARM: OMAP2+: omap_hwmod: Add support for
earlycon") we can now get debug information early if something goes
wrong as long as kernel command line has earlycon in it. Let's enable
it for n8x0.
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit eliminates two dummy regulator assignments.
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The Sharp panel 'envdd' regulator is now selected properly. This commit
eliminates a dummy regulator assignment at boot.
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit allows OMAP3530 variants to use common data that is
available in 'omap3-evm-processor-common.dtsi'. It adds proper pinmux
macros for 'omap3_pmx_core2' on OMAP3430. The Micron NAND chip is also
added for the TMDSEVM3530 processor module.
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit moves common OMAP3-EVM processor module device tree data
to a separate include file. This will allow for 'omap3-evm.dts' to use
device tree data that is unique to the OMAP3530 version of the
processor module, while making use of the work already done for the
'omap3-evm-37xx.dts'.
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi.
Also, define aliases for spi[123].
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi.
Also, define aliases for spi[123].
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
