The A83T has an RSB controller for talking to the PMIC and audio codec.
Add a device node for it. Since there is only one usable pinmux setting,
for it, add that as well.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Adds support for the Broadcom reference board BCM947189ACDMBR which
features the following:
* 128MB of DRAM
* External MoCA support through a Broadcom BCM6802 chip
* 1x external Gigabit PHY through the external BCM6802
* 1x USB 2.0 port
* 1x PCIE slot
* Few configurable buttons and LEDs
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This uses trigger-sources documented in commit 80dc6e1cd8 ("dt-bindings:
leds: document new trigger-sources property") to specify USB ports. Such an
information can be used by operating system to setup LEDs behavior.
I updated dts files for 7 devices I own and I was able to test.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This uses the existing Northstar USB3 PHY driver to enable the USB3
ports on NSP.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The rest of the DTSI file is in incrementing addresses, but the USB
OHCI/ECHI entries are out of sequence. Move them to put them in the
proper place.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cache related issues with DMA rings and performance issues related to
caching are being caused by not properly setting the "dma-coherent" flag
in the device tree entries. Adding it here to correct the issue.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: 3107fa5bcf ("ARM: dts: NSP: Add SD/MMC support")
Fixes: 13d04f2093 ("ARM: dts: NSP: Add AMAC entries")
Fixes: 5aeda7bf8a ("ARM: dts: NSP: Add and enable amac2")
Fixes: 17d5171723 ("ARM: dts: NSP: Add mailbox (PDC) to NSP")
Fixes: 1d8ece6639 ("ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree")
Fixes: 0f9f27a36d ("ARM: dts: NSP: Add I2C support to the DT")
Fixes: 8dbcad020f ("ARM: dts: nsp: Add sata device tree entry")
Fixes: 522199029f ("ARM: dts: NSP: Fix PCIE DT issue")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable MMC0 which is used for micro SD and MMC1 which is used for the on
board EMMC.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[fcooper@ti.com: add mmc1, bufferclass and pullup/pulldown settings]
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
[nsekhar@ti.com: add card detect GPIO support]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Add device tree nodes for MMC0 and MMC1 pesent
on 66AK2G device.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[nsekhar@ti.com: fix clock-names for mmc1 node]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
66AK2G has 2 instances of gpio. The first one has all the 144 GPIOs
functional. 9 banks with 16 gpios making a total of 144. The second
instance has only the GPIO0:GPIO67 functional and rest are marked
reserved.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
In order to be able to use more than 4GB of RAM when the LPAE is
activated, the dts must be converted in 64 bits.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The H8 homlet has a micro-SD card slot connected to mmc0,
and onboard eMMC from FORESEE, connected to mmc2.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Now that we support the MMC controllers on the A83T SoC, we can enable
them on some boards.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
mmc2 can support 8-bit eMMC chips, with a dedicated reset line.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A83T has 3 MMC controllers. The third one is a bit special, as it
supports a wider 8-bit bus, and a "new timing mode".
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The dwmac-sun8i hardware is present on the Beelink X2.
It uses the internal PHY.
This patch create the needed emac node.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[wens@csie.org: Fixed typo in commit subject]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
This STB has a type A socket which acts as OTG.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Bananapi M2-Magic is a board with an A33, a USB host and USB OTG
connectors, and 8GB eMMC, an AP6212 WiFi/Bluetooth chip and connectors for
DSI, CSI and GPIOs.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[wens@csie.org: Correct subject prefix case]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Cubietruck has an AXP209 PMIC with battery connector.
This enables the battery power supply subnode.
Signed-off-by: Alexander Syring <alex@asyring.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[wens@csie.org: Correct subject prefix order]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The R_INTC interrupt controller handles the NMI interrupt pin for the
SoC. While there is no documentation or code from the vendor for this
device on the A83T, existing mainline kernel drivers and bindings show
this to be similar to the old Allwinner interrupt controller found on
the A10 SoC, but with only the NMI interrupt wired. Register poking
experiments confirm this.
The device seems to be the same across all recent Allwinner SoCs, apart
from the A20 and A80, which have a separate set of registers to handle
the NMI interrupt. We already have a set of bindings supporting this
on the A31.
Add a device node for it, with an SoC specific compatible.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We introduced a new compatible for the NMI or R_INTC interrupt
controller. This new compatible has the register region aligned
to the boundary listed in the SoC's memory map.
This patch converts the NMI/R_INTC node to using the new compatible,
and fixes up the register region and device node name.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We introduced a new compatible for the NMI or R_INTC interrupt
controller. This new compatible has the register region aligned
to the boundary listed in the SoC's memory map.
This patch converts the NMI/R_INTC node to using the new compatible,
and fixes up the register region and device node name.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Support proper system power-off, which disables main regulator. This
results in much lower power consumption and support of power-on issued
by button press.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a ranges; line to the tscadc node. This creates a 1:1 mapping between
the addresses used by tscadc and those in its child nodes (adc, tsc).
Without such a mapping, the reg = ... lines in the tsc and adc nodes do
not create a resource. Probing the fsl-imx25-tcq and fsl-imx25-tsadc
drivers will then fail since there's no IORESOURCE_MEM.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Fixes: 92f651f39b ("ARM: dts: imx25: Add TSC and ADC support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- no SATA connector
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
UART2 on EIM_D26 - EIM_D29 pins supports interchanging RXD/TXD pins
and RTS/CTS pins.
One board using these alternate settings is Beckhoff CX9020. Add the
alternative configuration here, to make it available to others, too.
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX53 has an integrated secure real time clock. Add it to the dtsi.
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a devicetree entry for the Random Number Generator Version B (RNGB).
The driver for RNGC supports version B as well.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The mmc1 interrupt should be connected to GIC_SPI 40,
this patch fixes this.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
They should be used only when an actual
remote-endpoint is connected.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rgNN
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
Pull "DaVinci fixes for v4.13" from Sekhar Nori:
Drop unused VPIF endpoints from device-tree.
They should be used only when an actual
remote-endpoint is connected.
* tag 'davinci-fixes-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lcdk: drop unused VPIF endpoints
ARM: dts: da850-evm: drop unused VPIF endpoints
Two fixes to correct the EMAC blocks memory region size to match the
datasheet. One that converts raw A83T clock indices to macros from the
clk dt-binding header, completing the A83T sunxi-ng clk driver.
-----BEGIN PGP SIGNATURE-----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=aFvT
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Pull "Allwinner fixes for 4.13" from Chen-Yu Tsai:
Two fixes to correct the EMAC blocks memory region size to match the
datasheet. One that converts raw A83T clock indices to macros from the
clk dt-binding header, completing the A83T sunxi-ng clk driver.
* tag 'sunxi-fixes-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros
arm64: allwinner: sun50i-a64: Correct emac register size
ARM: dts: sunxi: h3/h5: Correct emac register size
showed a wrong value, so fix it before it gets copy-pasted
to much.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmEM5wQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVn+B/9Xy9km3t8cFVQ//SjNm1MEfiyVrgCnH6TH
trLit6AKq19LTIfeyI2RQucEXB0Csw2+YNh4q9Td6utnc0S3OpzueFsfKfAD9xif
WpRR6MJjCSlIQfhd09XuKyWoDwwNmnidv+Xd/H3M83dTOzoPmy0aDkn/shc1I+Tw
gL0CbLPz1HuHuG55S5EkxcBNi/Mj34qI5e3O8hrqzpfzmc1CdQ38zblfkiyu94v7
f/sVUv8p2YHyfvIJ1n1DxQx7lvAxGzo3Q7fXqS9D1jJx4iDWWFaraLMPu3NztLcv
1XrawJTdGZ9vTJSmzcEwH7JeAUHX41wIWjf/jEx9iE2R9EY0lyLo
=B0nU
-----END PGP SIGNATURE-----
Merge tag 'v4.13-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Pull "Rockchip dts32 fixes for 4.13" from Heiko Stübner:
Fix for the recently added mali dt support. The example
showed a wrong value, so fix it before it gets copy-pasted
to much.
* tag 'v4.13-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: fix mali gpu node on rk3288
dt-bindings: gpu: drop wrong compatible from midgard binding example
Since generic Cortex-A9 global timer is available after adding
it to compilation, enable its node in armada-38x.dtsi.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 is connected to the INT1 pin of
the FXLS8471Q accelerometer, so remove it from the unrelated ENET
group.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Colibri iMX7 modules come with 512MB on-module SLC NAND flash
populated. Make use of it by enabling the GPMI controller.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Raspberry Pi Zero W has the same components like the Zero plus
a Cypress CYW43438 wireless chip (wifi + bl).
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Until RPI 3 and Zero W the pl011 (uart0) was always on pin 14/15. So in
order to take care of them and other boards in the future,
we need to define UART pinmuxing on board level.
This work based on Eric Anholt's patch "ARM: bcm2385: Don't force pl011
onto pins 14/15." and Fabian Vogt's patch "ARM64: dts: bcm2837: assign
uart0 to BT and uart1 to pin headers".
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Northstar has 3 controllers: OHCI and EHCI (each with 2 ports) and XHCI
(with just 1 port). Describe them in the DT. In future this will allow
to reference them as trigger sources.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The clock controller provides a few reset lines as well. Add the
corresponding CPU cores.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add ethernet device node for MT2701
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add pin configuration for LED0 which is connected to a GPIO.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add pin configuration for SCIF2 serial console interface.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This registers the host1x node with the SMMU (as HC swgroup) to allow
the host1x code to attach to it. It avoid failing the probe sequence,
which resulted in the Tegra DRM driver not probing and thus nothing
being displayed on-screen.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable the nand device and setup pinmux on the mt7632m rfb with nand
support.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
All versions of the mt7623n RFB have an USB port so enable the device.
There is a gpio that gets used to power up the port supply. Add support
for this gpio using the fixed-regulator driver.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This patch does a cleanup of the uart nodes in the dts file of the RFB. It
adds aliases, enables 2 more uarts and explicitly sets the uart mode of the
console.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
There are 2 versions of the MT7623 SoC, the one is MT7623N and the other
is MT7623A. MT7623N is almost identical to MT7623A but has some
additional multimedia features. The reference boards are available as
NAND or MMC and might have a different ethernet setup. In order to reduce
the duplication of devicetree code we add an intermediate dtsi file for
these reference boards. Additionally MediaTek pointed out, that the EVB
is yet another board and the board in question is infact the RFB. Take
this into account while renaming the files.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MediaTek produces various PMICs. Which one is used depends on the actual
circuit design. Instead of adding the correct PMIC node to every dts file
we instead add a new intermediate dtsi file which adds the PMIC node. For
those boards with the same PMIC, the intermediate mt6323.dtsi could be
reused to save more redundant nodes created on each board device-tree
files.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
A CMA memory pool reserved memory node is added, and is attached to
the DSP node through the 'memory-region' property on the K2E EVM board.
This area will be used for allocating virtio rings and buffers. This
node allows the DSP Memory Protection and Address Extension (MPAX)
module to be configured properly for the DSP processor, and matches
the values used on the other Keystone 2 boards for software
compatibility.
The reserved memory node and the user DSP node are also marked okay
to enable the DSP on the 66AK2E EVM board.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
A common CMA memory pool reserved memory node is added, and is attached
to all the DSP nodes through the 'memory-region' property on the 66AK2L
EVM board. This area will be used for allocating virtio rings and buffers.
The common node allows the DSP Memory Protection and Address Extension
(MPAX) module to be configured uniformly across all the DSP processors.
The reserved memory node and all the user DSP nodes are also marked okay
to enable the DSPs on the 66AK2L EVM board.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
A common CMA memory pool reserved memory node is added, and is attached
to all the DSP nodes through the 'memory-region' property on the 66AK2H
EVM board. This area will be used for allocating virtio rings and buffers.
The common node allows the DSP Memory Protection and Address Extension
(MPAX) module to be configured uniformly across all the DSP processors.
The reserved memory node and all the user DSP nodes are also marked okay
to enable the DSPs on the 66AK2K EVM board.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The Keystone 2 66AK2E SoC has one TMS320C66x DSP Core Subsystem
(C66x CorePac), with a 1.4 GHz C66x Fixed or Floating-Point DSP
Core, and 32 KB of L1P & L1D SRAMs and a 1 MB L2 SRAM. Add the
DT node for this DSP processor sub-system. The processor does
not have a MMU, and uses various IPC Generation registers and
shared memory for inter-processor communication. The alias with
a stem 'rproc' has also been added for the DSP, it provides a
fixed remoteproc id for the DSP processor.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The Keystone 2 66AK2L SoCs have 4 TMS320C66x DSP Core Subsystems
(C66x CorePacs), each with a 1.0 GHz or 1.2 GHz C66x Fixed /
Floating-Point DSP Core, and 32 KB of L1P & L1D SRAMs and a 1 MB
L2 SRAM. Add the DT nodes for these DSP processor sub-systems.
The processors do not have an MMU, and use various IPC Generation
registers and shared memory for inter-processor communication.
The aliases with a stem 'rproc' have also been added for all the
DSPs, they provide a fixed remoteproc id to each DSP processor.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The Keystone 2 66AK2H/66AK2K SoCs have upto 8 TMS320C66x DSP Core
Subsystems (C66x CorePacs), each with a 1.0 GHz or 1.2 GHz C66x
Fixed/Floating-Point DSP Core, and 32 KB of L1P & L1D SRAMs and a
1 MB L2 SRAM. Add the DT nodes for these DSP processor sub-systems.
The processors do not have an MMU, and use various IPC Generation
registers and shared memory for inter-processor communication.
The aliases with a stem 'rproc' have also been added for all the
DSPs, they provide a fixed remoteproc id to each DSP processor.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
BCM2837 is somewhat unusual in that we build its DT on both arm32 and
arm64. Most devices are being run in arm32 mode.
Having the body of the DT for 2837 separate from 2835/6 has been a
source of pain, as we often need to make changes that span both
directories simultaneously (for example, the thermal changes for 4.13,
or anything that changes the name of a node referenced by '&' from
board files). Other changes are made more complicated than they need
to be, such as the SDHOST enabling, because we have to split a single
logical change into a 283[56] half and a 2837 half.
To fix this, make the stub board include file live in arm64 instead of
arm32, and keep all of BCM283x's contents in arm32. From here on, our
changes to DT contents can be submitted through a single tree.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
All 32bit Meson SoCs contain 128KiB SRAM. This SRAM is used when
suspending the device (the the ARM Power Firmware on
Meson8/Meson8b/Meson8m2 saves the DDR settings there) and to boot the
secondary CPU cores.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Meson8b has to define it's own compatible string for the watchdog. This
patch removes the duplicate resource (register region and interrupt)
definition from meson8b.dtsi and simply re-uses these values from
meson.dtsi (as the register offset, size and interrupt are identical).
This is purely cosmetic and does not change any functionality.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
pwm_ab and pwm_cd are already inherited from meson.dtsi, we only need to
define the correct "compatible" string so the pwm-meson driver can
choose the parent clocks correctly.
pwm_ef is added to meson8.dtsi directly (similar to how it's done in
meson8b.dtsi) as this controller only exists on Meson8 and Meson8b.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
According to the vendor kernel sources these also exist (at the same
address) on Meson6 and Meson8. This can be found by running
$ grep -R "define PWM_PWM_[A-D]" arch/arm/
in the Amlogic GPL kernel tree (arm-src-kernel-2015-01-15-321cfb5a46).
pwm_ef does not seem to exist on older SoCs, so we keep it in
meson8b.dtsi for now.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
dtc recently added PCI bus checks. Fix these warnings.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Define the iwg20m board dependent part of the MMCIF0 device node.
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Use R-Car Gen 2 fallback binding for vind nodes in DT for r8a7794 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7794 and the
fallback binding for R-Car Gen 2
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use R-Car Gen 2 fallback binding for vind nodes in DT for r8a7791 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7791 and the
fallback binding for R-Car Gen 2
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use R-Car Gen 2 fallback binding for vind nodes in DT for r8a7790 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7790 and the
fallback binding for R-Car Gen 2
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the MMCIF0 device to the r8a7743 device tree.
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reserve SRAM for the jump stub for CPU core bringup.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reserve SRAM for the jump stub for CPU core bringup.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reserve SRAM for the jump stub for CPU core bringup.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reserve SRAM for the jump stub for CPU core bringup.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reserve SRAM for the jump stub for CPU core bringup.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reserve SRAM for the jump stub for CPU core bringup.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reserve SRAM for the jump stub for CPU core bringup.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
R-Car E2 has 2 regions of Inter Connect RAM (72 + 4 KiB).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
R-Car M2-N has 2 regions of Inter Connect RAM (72 + 4 KiB).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
R-Car V2H has 2 regions of Inter Connect RAM (72 + 4 KiB).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
R-Car M2-W has 2 regions of Inter Connect RAM (72 + 4 KiB).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
R-Car H2 has 2 regions of Inter Connect RAM (72 + 4 KiB).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
RZ/G1E has 3 regions of Inter Connect RAM (72 + 4 + 256 KiB).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
RZ/G1M has 3 regions of Inter Connect RAM (72 + 4 + 256 KiB).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the iWave RainboW-G20D-Qseven board dependent part of the Ethernet
AVB device node.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add Ethernet AVB support for r8a7743 SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Adding pinctrl support for scif0 interface.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe GPIO blocks in the R8A7743 device tree.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the (previously omitted) Ether/PHY pin data to the SK-RZG1M board's
device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the (previously omitted) SCIF0 pin data to the SK-RZG1M board's
device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A7743 part of the PFC device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Now that the CCU device tree binding headers have been merged, we can
use the properly named macros in the device tree, instead of raw
numbers.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The datasheet said that emac register size is 0x10000 not 0x104
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[wens@csie.org: Fixed commit subject prefix]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Drop the unused endpoints. They should only be used when there is an
actual remote-endpoint connected.
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Drop the unused endpoints. They should only be used when there is
an actual remote-endpoint connected.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
- Fix wrong irq type for gpio expeander on Armada 388 GP
- Use __pa_symbol instead of virt_to_phys in the mv98dx3236 platform
SMP code
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWW3X4iMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71e78AJ4+wNdgOn6C
8PVxz97Ngx2L0O44AgCfXWXbhHye3y4p2wfLfFTBT1prMZ4=
=gydP
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-4.13-1' of git://git.infradead.org/linux-mvebu into fixes
Pull "mvebu fixes for 4.13 (part 1)" from Gregory CLEMENT:
- Fix wrong irq type for gpio expeander on Armada 388 GP
- Use __pa_symbol instead of virt_to_phys in the mv98dx3236 platform
SMP code
* tag 'mvebu-fixes-4.13-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada-38x: Fix irq type for pca955
ARM: mvebu: use __pa_symbol in the mv98dx3236 platform SMP code
Add necessary parent clocks for audss (Audio SubSystem, MAUDIO) clock
controller block.
This allows driver to keep EPLL enabled before accessing any MAUDIO
registers thus fixing silent hang. This silent hang appeared with
commit 6edfa11cb3 ("clk: samsung: Add enable/disable operation for
PLL36XX clocks"), e.g. on Odroid U3 usually with last (but unrelated)
messages:
[ 2.382741] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[ 2.405686] usb 1-3: new high-speed USB device number 3 using exynos-ehci
[ 2.419843] max77686-rtc max77686-rtc: setting system clock to 2017-06-21 17:04:13 UTC (1498064653)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix disable_irq related shared IRQ warnings for omap3 PRM
- Fix omap4 legacy code regression that accidentally removed code that
we still need for PRM interrupts
- Fix dm8168-evm NAND pins and MMC write protect pin direction
- Fix dra71-evm mdio impedance values
-----BEGIN PGP SIGNATURE-----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=ibLi
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Pull "Few fixes for omaps for issues found recently" from Tony Lindgren:
- Fix disable_irq related shared IRQ warnings for omap3 PRM
- Fix omap4 legacy code regression that accidentally removed code that
we still need for PRM interrupts
- Fix dm8168-evm NAND pins and MMC write protect pin direction
- Fix dra71-evm mdio impedance values
* tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra71-evm: mdio: Fix impedance values
ARM: dts: dm816x: Correct the state of the write protect pin
ARM: dts: dm816x: Correct NAND support nodes
ARM: OMAP4: Fix legacy code clean-up regression
ARM: OMAP2+: Fix omap3 prm shared irq
There's a potentiometer connected to ADC1 and ADC2 in0 on
stm32h743i-eval board.
- Add fixed-voltage 'vdda' regulator that supplies 'vref' pin.
It's used as voltage reference for ADC and/or DAC.
- Enable ADC1 in0 input (arbitrary choice: could be ADC2 as well).
Note: No pinctrl is needed to use in0 dedicated analog input pin
(e.g. ADC12_INP0).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add support for ADC (Analog to Digital Converter) to STM32H743.
It has 3 ADCs, distributed over two ADC blocks:
- ADC1 and ADC2 @0x40022000
- ADC3 @0x58026000 (instantiated separately)
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add support for DAC (Digital to Analog Converter) to STM32H743.
STM32H743 DAC has two output channels.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add support for DAC (Digital to Analog Converter) to STM32F429.
STM32F429 DAC has two output channels.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
add cec in devicetree for stm32f7 family
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Reorder nodes to keep coherency with others platforms (stm32f4/stm32f7).
Nodes are ordered following base address.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This patch adds the pin muxing for classd and enables it.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patch adds nodes for the classd device and its generated clock.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Declared as a regulator since the driver doesn't have a reset-gpios
property for this.
This ensures that the PHY is woken up, not depending on the state the
second stage bootloader leaves the pin.
This is a workaround until a proper mechanism is provided to reset such
devices like the pwrseq library [1] for instance.
[1] https://lkml.org/lkml/2017/2/10/779
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Declared as a regulator since the driver doesn't have a reset-gpios
property for this.
This ensures that the PHY is woken up, not depending on the state the
second stage bootloader leaves the pin.
This is a workaround until a proper mechanism is provided to reset such
devices like the pwrseq library [1] for instance.
[1] https://lkml.org/lkml/2017/2/10/779
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
gpio-line-names may help to make work with GPIOs from user space easier.
Following examples are provided with libgpiod
https://github.com/brgl/libgpiod :
|# Toggle a GPIO by name, then wait for the user to press ENTER.
|$ gpioset --mode=wait `gpiofind "USR-LED-2"`=1
|# Pause execution until a single event of any type occurs. Don't print
|# anything. Find the line by name.
|$ gpiomon --num-events=1 --silent `gpiofind "USR-IN"`
Used names was taken from RIoTboard schematics, version 1 (2013.12.07).
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Micrel PHY has its interrupt pin connected to a GPIO line. Wire
this up in the device tree.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Marvell switch has its interrupt pin connected to a GPIO
line. Wire this up in the device tree. This then allows us to use
interrupts from the embedded Ethernet PHYs in the switch. Also wire
them up in device tree.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Marvell switch has an EEPROM connected to it. List the size in DT,
in order to enable access to it via ethtool.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The RDU2 has a Marvell 88E6352 switch. Both the FEC and the i210
Ethernet interfaces are connected to the switch. Make the FEC the DSA
"CPU" port, and the i210 as a regular port on the switch.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The FEC has a Micrel PHY connected to it. This PHY is managed using
the bit-banging MDIO bus. Add this to the device tree.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently the LCD is turned on thanks to the bootloader initialization.
In order to make the kernel to turn on the LCD on is own, pass the
'enable-gpios' and 'power-supply' properties.
Also, the GPIO1_IO01 is not used as PWM functionality on this board. It is
connected to the PWREN pin of connector J14 and has a GPIO function, so
remove the PWM1 node and change the GPIO1_IO01 IOMUX to GPIO function.
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
It is preferred to use the panel compatible string rather than passing the
LCD timming in the device tree.
So pass the "innolux,at043tn24" compatible string to describe the parallel
LCD on this board.
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The 'uart-has-rtscts' property should be used when the board exposes the
native RTS and CTS UART pins.
On the imx6qdl-gw5xxx boards such pins are not used, so remove the
'uart-has-rtscts' property to make the hardware description correct.
Documentation/devicetree/bindings/serial/serial.txt states that
'uart-has-rtscts' and 'rts-gpios' properties are mutually exclusive.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Somehow the strange property ordering of the rv1108 mmc nodes slipped
through when it was added. To lessen the confusion in the future, do
the needed reordering to bring them in line with our regular order.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable sdmmc on rv1108 evaluation board. Also
add pinctrl for sdmmc controller.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On tango platforms, firmware configures the CPU clock, and Linux is
then only allowed to use the cpu_clk_divider to change the frequency.
Build the OPP table dynamically at init, in order to support whatever
firmware throws at us.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a reset-controller node for managing resets of various
remote processor devices on the SoC over the Texas Instrument's
System Control Interface (TI SCI) protocol.
Signed-off-by: Andrew F. Davis <afd@ti.com>
[s-anna@ti.com: rename node name, drop obsolete header]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Add a ti-sci node representing the clock provider in the system.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Add a ti-sci k2g_pds node to act as our generic power domain provider
in the system.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Texas Instrument's System Control Interface (TI-SCI) Message Protocol
is implemented in Keystone 2 generation 66AK2G SoC with the PMMC entity.
Add the ti-sci node representing this 66AK2G PMMC module.
Signed-off-by: Nishanth Menon <nm@ti.com>
[s-anna@ti.com: add unit address to DT node]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
fix up binding violation where the reset property is required
additionally.
Cc: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
As written in the datasheet the PCA955 can only handle low level irq and
not edge irq.
Without this fix the interrupt is not usable for pca955: the gpio-pca953x
driver already set the irq type as low level which is incompatible with
edge type, then the kernel prevents using the interrupt:
"irq: type mismatch, failed to map hwirq-18 for
/soc/internal-regs/gpio@18100!"
Fixes: 928413bd85 ("ARM: mvebu: Add Armada 388 General Purpose
Development Board support")
Cc: stable@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The tps61052 device node doesn't have a vendor prefix
in its compatible string, fix it by adding one.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The retu device node doesn't have a vendor prefix
in its compatible string, fix it by adding one.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
It's not correct to encode the subsystem in the I2C device name, so
drop the -mfd suffix. To maintain bisect-ability, change driver and
platform code / DTS users in the same patch.
Suggested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
dwmmc driver deprecated num-slots and plan to get rid
of it finally. Just move a step to cleanup it from DT.
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The OF graph is not needed because the panel is a child of dsi. Remove
the ports node in DSI node, and port node in panel node.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add a efuse node in the device tree for the rk3228 SoC.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for Altera FPGA connected to an spi port
to the evi devicetree file
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new compatible string has been introduced for sama5d2 SMC to allow to
manage the registers mapping change.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patch adds gpio power-key support for rk3229-evb board.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch enables the tsadc for rk3229-evb board.
The rk3229 evb board uses the CRU to reset the chip since it has not
the PMIC to connect it, and TSHUT is low active on evb board.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch enables eMMC support for rk3229-evb board.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch enables io-domain support for rk3229-evb board.
The power domain of VCCIO3 is selected from maskrom, so we do not
need to configure it.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds the cpu-supply property so that cpu can do dvfs
on rk3229-evb board.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds regulator info for rk3229-evb board.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds amend compatible content for eMMC of RK3228 SoC.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch sets PSCI as the default cpu enable-method for RK3228 SoC.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We deprecated the "num-slots" property now and plan to get
rid of it finally. Just move a step to cleanup it from DT.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds io-domain support for rk3228 SoC.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Due to some tiny differences between RK3228 and RK3229, this patch adds
a basic dtsi file which first includes a new CPU opp table for RK3229.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add reference to the Mali GPU device tree node on rk3288-fennec
Tested on Fennec board.
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add reference to the Mali GPU device tree node on rk3288-evb.
Tested on rk3288-evb-act8846 board.
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add reference to the Mali GPU device tree node on rk3288-tinker.
Tested on Tinker board.
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
"clock-freq-min-max" was deprecated. There is only using in rv1108.dtsi.
Use the "max-frequency" for removiing "clock-freq-min-max" in future.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The binding specifies the actual implementations only (mali-t760
for example) but not the arm,mali-midgard used in some vendor kernels.
So drop that compatible property from the rk3288 where it had slipped in.
Also fix the node name which should be a generic gpu@...
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Commit fa53757bca ("ARM: dts: uniphier: use SPDX-License-Identifier")
missed to touch these two. Now updating.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
pinctrl_spi4 pin group is not part of the low power iomux controller,
so move it under the normal iomuxc node.
Fixes: 184f39b57c ("ARM: dts: imx7d-sdb: Add GPIO expander node")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pass the 'backlight' property as described in
Documentation/devicetree/bindings/display/panel/simple-panel.txt
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
It is preferred to use the panel compatible string rather than passing the LCD
timming in the device tree.
So pass the "innolux,at043tn24" compatible string to describe the parallel LCD
on this board.
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Make the syscon-poweroff driver change only the shutdown bits on the
SNVS_LP control register.
This change fixes an issue with the RTC wakeup alarm, that was
previously disabled during power off.
Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx6qdl-icore-rqs boards use sgtl5000 codec and the machine
file (imx-sgtl5000) already sets SSI in slave mode and codec in
master mode, so there is no need for having this property.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pass the phy-reset-gpios property so that Ethernet PHYs can go
through a proper reset.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The IPU that drives HDMI must have its pre_sel set to pll2_pfd_396m
to avoid stepping on the LVDS output's toes, as the PLL can't be clocked
to the pixel clock and to the LVDS serial clock (3.5*pixel clock) at the
same time.
As we are using ipu1_di0 and ipu2_di0, ensure both are switched to
to pll2_pfd2_396m to avoid issues. The LDB driver will switch the
required IPU to ldb_di1 when it uses it to drive LVDS.
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to mx7sabresd schematics the MIPI CSI/DSI voltage rails
should be 2.8V but the voltage provided is a maximum of 3.3V and
minimum of 1.8V. Providing such a higher voltage might damage the
peripherals and violates the schematic settings.
Signed-off-by: Gautam Bhat <mindentropy@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables the ADV7180 analog video decoder sensor connected to the
IMX6 IPU on various Gateworks Ventana boards.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for Sound card and related codec(via i2c1) nodes
on Engicam GEAM6UL variant module boards.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Engicam SOM's with mounted on starter kits like icorem6(rqs), isiot
usually not explicitly named with -kit in dts file names and
instead Model has mentioned 'Starter kit' So apply the same rule
for geam SOM as well.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
GEAM6UL SOM does have single module, it doesn't come with
any variants. Maintaining imx6ul-geam.dtsi make no sense
so move all devices from .dtsi into dts file and drop the same.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
usdhc1 is enabled and assigned pinctrl-0 on imx6ul-geam.dtsi
but same thing done on imx6ul-geam-kit.dts, so remove this
re-enabled node from the same.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for Sound card and related codec(via i2c1) nodes
on Engicam Is.IoT MX6UL variant module boards.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Maintaining separate dtsi file with common nodes make unclear and
confusing since -isiot.dtsi is available for adding common nodes.
If the nodes are common between the dts files then mark status
as "okay" otherwise mark it "disabled" so-that respective dts
can mark status "okay"
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
dwmmc driver deprecated num-slots and plan to get rid
of it finally. Just move a step to cleanup it from DT.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 7dd968163f ("bitmap: bitmap_equal memcmp optimization") was
rather more restrictive than necessary; we can use memcmp() to implement
bitmap_equal() as long as the number of bits can be proved to be a
multiple of 8. And architectures other than s390 may be able to make
good use of this optimisation.
[arnd@arndb.de: fix build: add a memcmp() declaration]
Link: http://lkml.kernel.org/r/20170630153908.3439707-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20170628153221.11322-5-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
v1 series[1] for dp83867 phy impedance-control support,
specifies to use ti,impedance-control with a value. These
properties got updated iduring review to specify whether
min or max impedance. But the DT still uses the old values
which never takes effect. Update the DT node by using the
proper DT properties.
[1] https://patchwork.kernel.org/patch/9239729/
Fixes: 9868bc585ae2c ("ARM: dts: Add support for dra718-evm")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 599c376c49 ("ARM: dts: Fix gpio interrupts for dm816x")
corrected some problems with the MMC. However, it gets the write
protect pin backwards. It needs to be ACTIVE_HIGH not ACTIVE_LOW.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ELM node in dm816x.dtsi needs to declare the correct compatible
value here as per the binding only one value is correct, and the current
driver handles it correctly. We then add pinmux information for the
NAND found on the EVM so that we do not rely on the ROM to do this for
us, and also so that we do not try and probe NAND before we probe the
ELM.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Device-tree continues to see lots of updates. The majority of patches
here are smaller changes for new hardware on existing platforms, and
there are a few larger changes worth pointing out.
New machines:
- The new Action Semi S500 platform is added along with initial
support for the LeMaker Guitar board.
- STM32 gains support for three new boards: stm32h743-disco,
stm32f746-disco, and stm32f769-disco, along with new device
support for the existing stm32f429 boards.
- Renesas adds two new boards, the tiny GR-Peach based on RZ/A1H
with 10MB on-chip SRAM, and the iWave G20D-Q7 System-on-Module
plus board.
- On Marvell "mvebu", we gain support for the Linksys WRT3200ACM
wireless router.
- For NXP i.MX, we gain support for the Gateworks Ventana GW5600
and the Technexion Pico i.MX7D single-board computers.
- The BeagleBone Blue is added for OMAP, it's the latest variation
of the popular Beaglebone Black single-board computer.
- The Allwinner based Lichee Pi Zero and NanoPi M1 Plus boards
are added, these are the latest variations of a seemingly endless
supply of similar single-board computers.
Other updates:
- Linus Walleij improves support for the "Faraday" based SoC platforms
from various SoC makers (Moxart, Aspeed, Gemini)
- The ARM Mali GPU is now describe on Rockchips SoCs
- Mediatek MT7623 is extended significantly, making it much
more useful.
- Lots of individual updates on Renesas, OMAP, Rockchips, Broadcom,
Allwinner, Qualcomm, iMX
- For Amlogic, the clock support is extended a lot on meson8b.
- We now build the devicetree file for the Raspberry Pi 3 on 32-bit
ARM, in addition to the existing ARM64 support, to help users
wanting to run a 32-bit system on it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=onXv
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM device-tree updates from Arnd Bergmann:
"Device-tree continues to see lots of updates. The majority of patches
here are smaller changes for new hardware on existing platforms, and
there are a few larger changes worth pointing out.
New machines:
- The new Action Semi S500 platform is added along with initial
support for the LeMaker Guitar board.
- STM32 gains support for three new boards: stm32h743-disco,
stm32f746-disco, and stm32f769-disco, along with new device support
for the existing stm32f429 boards.
- Renesas adds two new boards, the tiny GR-Peach based on RZ/A1H with
10MB on-chip SRAM, and the iWave G20D-Q7 System-on-Module plus
board.
- On Marvell "mvebu", we gain support for the Linksys WRT3200ACM
wireless router.
- For NXP i.MX, we gain support for the Gateworks Ventana GW5600 and
the Technexion Pico i.MX7D single-board computers.
- The BeagleBone Blue is added for OMAP, it's the latest variation of
the popular Beaglebone Black single-board computer.
- The Allwinner based Lichee Pi Zero and NanoPi M1 Plus boards are
added, these are the latest variations of a seemingly endless
supply of similar single-board computers.
Other updates:
- Linus Walleij improves support for the "Faraday" based SoC
platforms from various SoC makers (Moxart, Aspeed, Gemini)
- The ARM Mali GPU is now describe on Rockchips SoCs
- Mediatek MT7623 is extended significantly, making it much more
useful.
- Lots of individual updates on Renesas, OMAP, Rockchips, Broadcom,
Allwinner, Qualcomm, iMX
- For Amlogic, the clock support is extended a lot on meson8b.
- We now build the devicetree file for the Raspberry Pi 3 on 32-bit
ARM, in addition to the existing ARM64 support, to help users
wanting to run a 32-bit system on it"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (345 commits)
ARM: dts: socfpga: set the i2c frequency
ARM: dts: socfpga: Add second ethernet alias to VINING FPGA
ARM: dts: socfpga: Drop LED node from VINING FPGA
ARM: dts: socfpga: Remove I2C EEPROMs from VINING FPGA
ARM: dts: socfpga: Enable QSPI support on VINING FPGA
ARM: dts: socfpga: Fix the ethernet clock phandle
ARM: pxa: Use - instead of @ for DT OPP entries
ARM: dts: owl-s500: Add SPS node
ARM: dts: owl-s500: Set CPU enable-method
dt-bindings: arm: cpus: Add S500 enable-method
ARM: dts: Add Actions Semi S500 and LeMaker Guitar
dt-bindings: arm: Document Actions Semi S900
dt-bindings: timer: Document Owl timer
ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
dt-bindings: arm: Document Actions Semi S500
dt-bindings: Add vendor prefix for Actions Semi
ARM: dts: turris-omnia: Add generic compatible string for I2C EEPROM
ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango)
ARM: dts: armada-385-linksys: fixup button node names
ARM: dts: armada-385-linksys: group pins in pinctrl
...
Smaller patches that didn't seem to find a home in other branches, and
low-priority fixes from late in the merge window.
- Lee Jones retires as bcm2835 (raspberry pi) co-maintainer.
- A couple of bugfixes for the ARM CCN bus driver that were
regarded not important enough
- minor device tree fixes for the Renesas and Marvell platforms,
that came a little late or did not justify have another
pull request after the last -rc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MBxL
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull non-urgent ARM SoC fixes from Arnd Bergmann:
"Smaller patches that didn't seem to find a home in other branches, and
low-priority fixes from late in the merge window.
- Lee Jones retires as bcm2835 (raspberry pi) co-maintainer.
- a couple of bugfixes for the ARM CCN bus driver that were regarded
not important enough
- minor device tree fixes for the Renesas and Marvell platforms, that
came a little late or did not justify have another pull request
after the last -rc"
* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
bus: arm-ccn: Enable stats for CCN-502 interconnect
dt-bindings: arm-ccn: Add bindings info for CCN-502 compatible string
bus: arm-ccn: Use devm_kcalloc() in arm_ccn_probe()
bus: arm-ccn: Fix module autoload
MAINTAINERS: add RV1108 Rockchip soc to maintained files
ARM: dts: kirkwood: Fix Openblock A6 nand partition overlap
ARM: dts: armadillo800eva: Split LCD mux and gpio
MAINTAINERS: Remove Lee Jones from bcm2835.
- Add support to enable irq wake for slot gpio
- Remove MMC_CAP2_HC_ERASE_SZ and make it the default behaviour
- Improve R1 response error checks for stop commands
- Cleanup and clarify some MMC specific code
- Keep card runtime resumed while adding SDIO function devices
- Use device_property_read instead of of_property_read in mmc_of_parse()
- Move boot partition locking into a driver op to enable proper I/O scheduling
- Move multi/single-ioctl() to use block layer to enable proper I/O scheduling
- Delete bounce buffer Kconfig option
- Improve the eMMC HW reset support provided via the eMMC pwrseq
- Add host API to manage SDIO IRQs from a workqueue
MMC host:
- dw_mmc: Drop support for multiple slots
- dw_mmc: Use device_property_read instead of of_property_read
- dw_mmc-rockchip: Optional improved tuning to greatly decrease tuning time
- dw_mmc: Prevent rpm suspend for SDIO IRQs instead of always for SDIO cards
- dw_mmc: Convert to use MMC_CAP2_SDIO_IRQ_NOTHREAD for SDIO IRQs
- omap_hsmmc: Convert to mmc regulator APIs to consolidate code
- omap_hsmmc: Deprecate "vmmc_aux" in DT and use "vqmmc" instead
- tmio: make sure SDIO gets reinitialized after resume
- sdhi: add CMD23 support to R-Car Gen2 & Gen3
- tmio: add CMD23 support
- sdhi/tmio: Refactor code and rename files to simplify Kconfig options
- sdhci-pci: Enable card detect wake for Intel BYT-related SD controllers
- sdhci-pci: Add support for Intel CNP
- sdhci-esdhc-imx: Remove ENGcm07207 workaround - allow multi block transfers
- sdhci-esdhc-imx: Allow all supported prescaler values
- sdhci-esdhc-imx: Fix DAT line software reset
- sdhci-esdhc: Add SDHCI_QUIRK_32BIT_DMA_ADDR
- atmel-mci: Drop AVR32 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zJi3
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support to enable irq wake for slot gpio
- Remove MMC_CAP2_HC_ERASE_SZ and make it the default behaviour
- Improve R1 response error checks for stop commands
- Cleanup and clarify some MMC specific code
- Keep card runtime resumed while adding SDIO function devices
- Use device_property_read instead of of_property_read in mmc_of_parse()
- Move boot partition locking into a driver op to enable proper I/O scheduling
- Move multi/single-ioctl() to use block layer to enable proper I/O scheduling
- Delete bounce buffer Kconfig option
- Improve the eMMC HW reset support provided via the eMMC pwrseq
- Add host API to manage SDIO IRQs from a workqueue
MMC host:
- dw_mmc: Drop support for multiple slots
- dw_mmc: Use device_property_read instead of of_property_read
- dw_mmc-rockchip: Optional improved tuning to greatly decrease tuning time
- dw_mmc: Prevent rpm suspend for SDIO IRQs instead of always for SDIO cards
- dw_mmc: Convert to use MMC_CAP2_SDIO_IRQ_NOTHREAD for SDIO IRQs
- omap_hsmmc: Convert to mmc regulator APIs to consolidate code
- omap_hsmmc: Deprecate "vmmc_aux" in DT and use "vqmmc" instead
- tmio: make sure SDIO gets reinitialized after resume
- sdhi: add CMD23 support to R-Car Gen2 & Gen3
- tmio: add CMD23 support
- sdhi/tmio: Refactor code and rename files to simplify Kconfig options
- sdhci-pci: Enable card detect wake for Intel BYT-related SD controllers
- sdhci-pci: Add support for Intel CNP
- sdhci-esdhc-imx: Remove ENGcm07207 workaround - allow multi block transfers
- sdhci-esdhc-imx: Allow all supported prescaler values
- sdhci-esdhc-imx: Fix DAT line software reset
- sdhci-esdhc: Add SDHCI_QUIRK_32BIT_DMA_ADDR
- atmel-mci: Drop AVR32 support"
* tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
mmc: dw_mmc: remove the unnecessary slot variable
mmc: dw_mmc: use the 'slot' instead of 'cur_slot'
mmc: dw_mmc: remove the 'id' arguments about functions relevant to slot
mmc: dw_mmc: change the array of slots
mmc: dw_mmc: remove the loop about finding slots
mmc: dw_mmc: deprecated the "num-slots" property
mmc: dw_mmc-rockchip: parse rockchip, desired-num-phases from DT
dt-bindings: rockchip-dw-mshc: add optional rockchip, desired-num-phases
mmc: renesas-sdhi: improve checkpatch cleanness
mmc: tmio: improve checkpatch cleanness
mmc: sdhci-pci: Enable card detect wake for Intel BYT-related SD controllers
mmc: slot-gpio: Add support to enable irq wake on cd_irq
mmc: core: Remove MMC_CAP2_HC_ERASE_SZ
mmc: core: for data errors, take response of stop cmd into account
mmc: core: check also R1 response for stop commands
mmc: core: Clarify code for sending CSD
mmc: core: Drop mmc_all_send_cid() and use mmc_send_cxd_native() instead
mmc: core: Re-factor code for sending CID
mmc: core: Remove redundant code in mmc_send_cid()
mmc: core: Make mmc_can_reset() static
...
Pull timer updates from Thomas Gleixner:
"A rather large update for timers/timekeeping:
- compat syscall consolidation (Al Viro)
- Posix timer consolidation (Christoph Helwig / Thomas Gleixner)
- Cleanup of the device tree based initialization for clockevents and
clocksources (Daniel Lezcano)
- Consolidation of the FTTMR010 clocksource/event driver (Linus
Walleij)
- The usual set of small fixes and updates all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (93 commits)
timers: Make the cpu base lock raw
clocksource/drivers/mips-gic-timer: Fix an error code in 'gic_clocksource_of_init()'
clocksource/drivers/fsl_ftm_timer: Unmap region obtained by of_iomap
clocksource/drivers/tcb_clksrc: Make IO endian agnostic
clocksource/drivers/sun4i: Switch to the timer-of common init
clocksource/drivers/timer-of: Fix invalid iomap check
Revert "ktime: Simplify ktime_compare implementation"
clocksource/drivers: Fix uninitialized variable use in timer_of_init
kselftests: timers: Add test for frequency step
kselftests: timers: Fix inconsistency-check to not ignore first timestamp
time: Add warning about imminent deprecation of CONFIG_GENERIC_TIME_VSYSCALL_OLD
time: Clean up CLOCK_MONOTONIC_RAW time handling
posix-cpu-timers: Make timespec to nsec conversion safe
itimer: Make timeval to nsec conversion range limited
timers: Fix parameter description of try_to_del_timer_sync()
ktime: Simplify ktime_compare implementation
clocksource/drivers/fttmr010: Factor out clock read code
clocksource/drivers/fttmr010: Implement delay timer
clocksource/drivers: Add timer-of common init routine
clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume
...
This adds an initial DT for the S500 SoC and a devboard based on it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Z5XX
-----END PGP SIGNATURE-----
Merge tag 'actions-arm-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt
Pull "Actions Semi ARM based SoC DT for v4.13" from Andreas Färber:
This adds an initial DT for the S500 SoC and a devboard based on it.
* tag 'actions-arm-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
ARM: dts: owl-s500: Add SPS node
ARM: dts: owl-s500: Set CPU enable-method
dt-bindings: arm: cpus: Add S500 enable-method
ARM: dts: Add Actions Semi S500 and LeMaker Guitar
dt-bindings: arm: Document Actions Semi S900
dt-bindings: timer: Document Owl timer
dt-bindings: arm: Document Actions Semi S500
dt-bindings: Add vendor prefix for Actions Semi
- greatly expands DT clock support for meson8b
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=o8Zj
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Merge "Amlogic 32-bit DT changes for v4.13 (round 2)" from Kevin Hilman:
- greatly expands DT clock support for meson8b
* tag 'amlogic-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (22 commits)
ARM: dts: meson: use the real ethernet clock on Meson8 and Meson8b
ARM: dts: meson8b: add the SCU device node
ARM: dts: meson: add USB support on Meson8 and Meson8b
ARM: dts: meson: add the hardware random number generator
ARM: dts: meson8: add reserved memory zones
ARM: dts: meson: add the SAR ADC
ARM: dts: meson8: add the pins for the SDIO controller
ARM: dts: meson8: add the PWM_E and PWM_F pins
ARM: dts: meson: use GIC_SPI and IRQ_TYPE_EDGE_RISING macros
ARM: dts: meson: use C preprocessor friendly include syntax
ARM: dts: meson8: fix the IR receiver pins
clk: meson8b: export the ethernet gate clock
clk: meson8b: export the USB clocks
clk: meson8b: export the gate clock for the HW random number generator
clk: meson8b: export the SDIO clock
clk: meson8b: export the SAR ADC clocks
clk: meson-gxbb: un-export the CPU clock
clk: meson-gxbb: expose UART clocks
clk: meson-gxbb: expose SPICC gate
clk: meson-gxbb: expose spdif master clock
...
Pull ARM fixes from Russell King:
"Three more fixes:
- Fix the previous fix merged in the last pull for the Thumb2
decompressor.
- A fix from Vladimir to correctly identify the V7M cache type.
- The optimised 3G vmsplit case does not work with LPAE, so don't
allow this to be selected for LPAE configurations"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8682/1: V7M: Set cacheid iff DminLine or IminLine is nonzero
ARM: 8681/1: make VMSPLIT_3G_OPT depends on !ARM_LPAE
ARM: 8680/1: boot/compressed: fix inappropriate Thumb2 mnemonic for __nop
Use 'clock-frequency' binding for the i2c node that will put the I2C driver
into the standard operating mode. 'speed-mode' was not a valid binding for
the I2C driver, remove it.
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add DT alias for the second ethernet present on mainboard rev 1.10.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Drop the LED node from VINing FPGA DT because the LED wiring is
different on each mainboard revision. This wiring is therefore
handled in mainboard DT Overlays.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Remove the EEPROMs attached to the I2C expander ports which
lead to the backplane slots from the main VIN|ING DTS file.
These EEPROMs are bound using separate DTO files, which lets
us handle both two-slot and six-slot configuration of the
backplane.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The ethernet block clock phandle must point to the clock node which
represents the clock which directly supply the ethernet block. This
is emac_x_clk , not emacx_clk , so fix this.
From: Pavel Machek <pavel@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
- cpu operating points renaming from Viresh
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZSqEIAAoJEAP2et0duMsSArIP/RW+VulRdyplsFlvIejM2kMt
wmMUinNQWDEob0mqWBKcPuoX89qI+J2psvX+IbqG/lAgkCmT9C3QH2k+4QEyoeTf
YuN4h9vhaetOROthnz8xcz5w8hVkxTeMSaOA/OHWMC0Ao/2/n2VP2UDS5J5aN97o
wWTR2FWdpQ1uqfv/GRngM3jmLn1EvufwgVKwfEd2J6iYuHdESFURsGzafOBk5stX
GP5UUtzTP+vrEapfxZtcKM1hhDtoDDLXa3FAQ9YUv4bX1DQVSwXnm43rKcxvBfo7
2fUSJSqeRnj4kkGaAtT8/Nm8lhJQUP5xsBVbUs1S2hwooLczinSdlOuIlUgfWrA9
KnNljLOsWiq2onobI4YMMS3J01X/k1nXt7qF7tju1z/H2/IoEgnD7QuJJAE982Of
PSoi1C7adRf7d2FSZsNlYMiUkSzVwGdgfA6x97ar1yH/rJnVojW/s3wurrQYT9Lo
/uz81rbHxR6XmkAYIB5PA9TyxQkuFrioiMnAjiF2jldRzFodTaTz+9lvTDUrJe02
jj7sshrafuht0tNiVPwJSpmWUK+gP3+nxseJ6MwRfDX40VsdC+TbSumWplyFqowo
IU8jjF1ueW2wBtAnEA5ZH9ZhoCeGC9KCqxdLiplaDVnXa8pc7bThPw4LTC60Xe3T
wlNJwqJHMjjCx/am1jIO
=QBWb
-----END PGP SIGNATURE-----
Merge tag 'pxa-dt-4.13' of https://github.com/rjarzmik/linux into next/dt
Pull "pxa-dt for v4.13" from Robert Jarzmik:
This device-tree pxa update brings :
- cpu operating points renaming from Viresh
* tag 'pxa-dt-4.13' of https://github.com/rjarzmik/linux:
ARM: pxa: Use - instead of @ for DT OPP entries
1. Add needed property for CEC on Odroid U3,
2. Fix reset GPIO polarity on Rinato.
-----BEGIN PGP SIGNATURE-----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=iCaB
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Pull "Samsung DeviceTree update for v4.13, part two" from Krzysztof Kozłowski:
1. Add needed property for CEC on Odroid U3,
2. Fix reset GPIO polarity on Rinato.
* tag 'samsung-dt-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Fix polarity of panel reset gpio in Rinato
ARM: dts: exynos: add needs-hpd to &hdmicec for Odroid-U3
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
commit 94647a3012 ("ARM: dts: omap3-overo: Enable WiFi/BT combo")
while enabling WiFi/BT combo added regulator to trigger the nReset
signal of the Bluetooth module in vqmmc-supply. However BT should be
handled by UART. Moreover "vqmmc" is not a defined binding for
omap_hsmmc. While "vqmmc" in mmc2 hasn't caused any issues so far,
mmc2 will start to mis-behave once omap_hsmmc defines "vqmmc"
binding.
Remove "vqmmc-supply" property in mmc2 here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add "max-frequency" property to MMC dt nodes and set the
maximum frequency to 192MHz for MMC1/MMC2, 64MHz for MMC3
and 192MHz for MMC4. pdata quirks must be utilized to
detect presence of rev 1.1/1.0 of silicon and adjust
maximum frequencies as per restrictions documented in i843.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
On DRA75x EVM, MMC2 vdd/ios are connected to a common supply fixed at 1.8V
not 3.3V
Fixes: 6cf02dbb4b ("ARM: dts: dra7-evm: Add mmc2 node for eMMC support")
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dt binding documentation of omap-hsmmc recommends using
"vmmc_aux" for IO supply lines. However
commit 0af28cc926 ("ARM: dts: am57xx-beagle-x15: Add support
for rev B1") added it as "vmmc-aux". Now that anyways it
needs to be fixed, use the generic "vqmmc" binding instead of
the deprecated "vmmc_aux".
Fixes: commit 0af28cc926 ("ARM: dts: am57xx-beagle-x15: Add
support for rev B1")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add vqmmc-supply property to mmc1 dt node and populate
it with ldo1_reg to reflect ldo1_out is connected to mmc1 IO lines.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add vqmmc-supply property to mmc1 dt node and populate
it with ldo1_reg to reflect ldo1_out is connected to mmc1 IO lines.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
On dra72/dra71 evms, mmc2 vdd/ios are connected to a common 1.8V supply
not 3.3V. Also the regulator that supplies 1.8V is different on dra71-evm
so move the supply property from common dtsi to evm specific dts files.
Fixes: a4240d3af6 ("ARM: dts: Add support for dra72-evm rev C (SR2.0)")
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Stream of fixes has slowed down, only a few this week:
- Some DT fixes for Allwinner platforms, and addition of a clock to
the R_CCU clock controller that had been missed.
- A couple of small DT fixes for am335x-sl50.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pi+d
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Stream of fixes has slowed down, only a few this week:
- Some DT fixes for Allwinner platforms, and addition of a clock to
the R_CCU clock controller that had been missed.
- A couple of small DT fixes for am335x-sl50"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
ARM: dts: am335x-sl50: Fix card detect pin for mmc1
arm64: allwinner: h5: Remove syslink to shared DTSI
ARM: sunxi: h3/h5: fix the compatible of R_CCU
- New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D
Board.
- A series from Alexandre Belloni to correct the vendor prefix for
rv4162 compatible.
- A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and
imx7d-sdb board.
- Increase the SGTL5000 LRCLK pad strength to fix a random audio
channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri
boards.
- Clean up non-existing property 'enable-active-low' from fixed
regulator device nodes.
- Correct GPIO polarity for Ethernet PHY and PCI reset lines, even
though device drivers do not use the polarity for now.
- Add Wifi and Bluetooth support for imx7d-sdb board.
- Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding.
- Update zii-rdu2 device tree source to use #include "..." for local
inclusion.
- A series from Philipp Zabel and Steve Longerbeam to enable video
capture support for imx6qdl platforms.
- A number of small random updates on various board support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZRcZ+AAoJEFBXWFqHsHzOPrcIAKrIeegjnl29Fp6JA2u3xC3R
XRyi59ybxGLB/8FNdbKqWJS9cAgOuF61FgYIgSRTqxVobPtZTdGMicnbp+FTTRYa
AaXxeB+3YVH2PJxDB1f4ZrlcBMNo3cpSO4ECbtnBgxoupQXOKIBQbLbujbyjsnbP
d/XFCC6LQFlL7yH8+jQrjiUkk0HSzHpzq3Kt6Dzq7WqWsOghOqDfsV2PhqnKvNzL
V0iovP9u9rayWn7Ik+bg7GlOtdaBTf8i0/TN4LcpCiKSw3wh7Uz03E0Cd2WMIO3N
Qs9R2QQ/GS0zZOmBlpYBO2waw9Xy9ZnbX/5zJtnw29IBiVdmbSNA5Q0QJySxPtw=
=hxCr
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
The i.MX device tree updates for 4.13:
- New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D
Board.
- A series from Alexandre Belloni to correct the vendor prefix for
rv4162 compatible.
- A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and
imx7d-sdb board.
- Increase the SGTL5000 LRCLK pad strength to fix a random audio
channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri
boards.
- Clean up non-existing property 'enable-active-low' from fixed
regulator device nodes.
- Correct GPIO polarity for Ethernet PHY and PCI reset lines, even
though device drivers do not use the polarity for now.
- Add Wifi and Bluetooth support for imx7d-sdb board.
- Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding.
- Update zii-rdu2 device tree source to use #include "..." for local
inclusion.
- A series from Philipp Zabel and Steve Longerbeam to enable video
capture support for imx6qdl platforms.
- A number of small random updates on various board support.
* tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
ARM: dts: ls1021a: update the clockgen node
ARM: dts: imx6-sabreauto: add the ADV7180 video decoder
ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture
ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
ARM: dts: imx6-sabreauto: create i2cmux for i2c3
ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors
ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround
ARM: dts: imx6qdl: add capture-subsystem device
ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections
ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
ARM: dts: imx6qdl: add multiplexer controls
ARM: dts: imx6: Fix PCI GPIO reset polarity
ARM: dts: imx7d-sdb: Add Bluetooth support
ARM: dts: imx7d-sdb: Add Wifi support
ARM: dts: imx7d-sdb: Adjust the regulator nodes
ARM: dts: imx: Fix Ethernet PHY reset polarity
ARM: dts: imx7: Fix typo in watchdog pin name
ARM: dts: vf610-zii: Add switch eeprom-length properties
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add Linksys WRT3200ACM (Rango) support
- Add PWM properties for gpio on Aramda XP and 38x
- A couple of minor updates for the 98dx3236 and 98dx4251
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWUTNiiMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71SXoAJsEyr+EVfF0
JgsHdARO9tMWcZ8otQCdHFovLqsE2/sNSkwdZrUjaC3xRgY=
=bXFP
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.13-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.13 (part 1)
- Add Linksys WRT3200ACM (Rango) support
- Add PWM properties for gpio on Aramda XP and 38x
- A couple of minor updates for the 98dx3236 and 98dx4251
* tag 'mvebu-dt-4.13-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: turris-omnia: Add generic compatible string for I2C EEPROM
ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango)
ARM: dts: armada-385-linksys: fixup button node names
ARM: dts: armada-385-linksys: group pins in pinctrl
ARM: dts: armada-385-linksys: partition layout is board specific
ARM: dts: armada-385-linksys: use binary unit prefixes
ARM: dts: armada-385-linksys: drop legacy DSA bindings
ARM: dts: armada-385-linksys: usb3 label cleanup
ARM: dts: armada-385-linksys: bm pools by label order
ARM: dts: armada-385-linksys: drop redundant properties in dependants
ARM: dts: armada-385-linksys: flatten dependants
ARM: dts: armada-385-linksys: label nodes
ARM: dts: armada-385-linksys: flatten dtsi
ARM: dts: mvebu: disable the rtc on 98dx3236 SoC
ARM: dts: mvebu: add missing interrupt to 98dx4251 switch
ARM: dts: armada-xp: Use pwm-fan rather than gpio-fan
ARM: dts: mvebu: Add PWM properties for armada-38x
ARM: dts: mvebu: Add PWM properties to .dtsi files
Signed-off-by: Olof Johansson <olof@lixom.net>
- Switch to the new NAND binding
- A few non urgent fixes
-----BEGIN PGP SIGNATURE-----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=N7os
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.13-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
DT for 4.13
- Switch to the new NAND binding
- A few non urgent fixes
* tag 'at91-ab-4.13-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: dts: at91: sama5d2_xplained: remove wrong memory node
ARM: dts: at91: sama5d2_xplained: add pwm controller
ARM: dts: at91: Add the NOR flash available on sama5d3 dev kits
ARM: dts: at91: Switch to the new NAND bindings
ARM: dts: at91: Declare EBI/NAND controllers
dt-bindings: mtd: atmel-nand: Document the nfc-io bindings
ARM: dts: at91-sama5d4: use IRQ_TYPE_* to specify irq flags
dts: gpio_atmel: adapt binding doc to reality
ARM: dts: at91: sama5d2: add m_can nodes
ARM: dts: at91: Add generic compatible string for I2C EEPROM
Signed-off-by: Olof Johansson <olof@lixom.net>
Cleanup:
* Correct PCI bus dtc warnings for r8a779x SoCs
Enhancements:
* Add support for iWave G20D-Q7 board based on RZ/G1M SoC
* Add support for GR-Peach board based on r7s72100 SoC
* Add composite video and HDMI input to gose board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zBWR
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM Based SoC DT Updates for v4.13
Cleanup:
* Correct PCI bus dtc warnings for r8a779x SoCs
Enhancements:
* Add support for iWave G20D-Q7 board based on RZ/G1M SoC
* Add support for GR-Peach board based on r7s72100 SoC
* Add composite video and HDMI input to gose board
* tag 'renesas-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r8a779x: Fix PCI bus dtc warnings
ARM: dts: iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1M
ARM: dts: iwg20m: Add iWave RZG1M Qseven SOM
ARM: dts: gose: add composite video input
ARM: dts: r7s72100: Add support for GR-Peach
ARM: dts: gose: add HDMI input
Signed-off-by: Olof Johansson <olof@lixom.net>
* Fix IPQ4019 i2c0 node
* Add GSBI7 on IPQ8064
* Add misc APQ8060 devices
* Fixup USB related devices on APQ8064 and MSM8974
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ynzd
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm Device Tree Changes for v4.13
* Fix IPQ4019 i2c0 node
* Add GSBI7 on IPQ8064
* Add misc APQ8060 devices
* Fixup USB related devices on APQ8064 and MSM8974
* tag 'qcom-dts-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: add core I2C devices to the APQ8060 Dragonboard
ARM: dts: add GSBI8 defines to the MSM8660 family
ARM: dts: Qualcomm APQ8060 DragonBoard ALS sensor
ARM: dts: add XOADC and IIO HWMON to MSM8660/APQ8060
ARM: dts: qcom: ipq4019: fix i2c_0 node
ARM: dts: qcom: add gsbi7 serial to ipq8064 SoC device tree
ARM: dts: qcom-apq8064: Collapse usb support into one node
ARM: dts: qcom-msm8974: Add HS usb node and OTG detection mechanisms
ARM: dts: qcom: add charger otg regulator
ARM: dts: qcom: Remove s4/5vs1,2 from RPM pm8941 control
Signed-off-by: Olof Johansson <olof@lixom.net>
This removes support for the Whistler board, which only a handful of
people ever had access to and which doesn't provide any features over
other Tegra20 devices that we support.
Also this cleans up some PCI related device tree content in preparation
for a future DTC release that has additional checks for the PCI bus.
-----BEGIN PGP SIGNATURE-----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=Il+U
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.13-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
ARM: tegra: Device tree changes for v4.13-rc1
This removes support for the Whistler board, which only a handful of
people ever had access to and which doesn't provide any features over
other Tegra20 devices that we support.
Also this cleans up some PCI related device tree content in preparation
for a future DTC release that has additional checks for the PCI bus.
* tag 'tegra-for-4.13-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: dts: tegra: fix PCI bus dtc warnings
ARM: tegra: remove Whistler support
Signed-off-by: Olof Johansson <olof@lixom.net>
This tag is about bringing the EMAC support to the H3 boards.
-----BEGIN PGP SIGNATURE-----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=1g1O
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-h3-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner H3 changes for 4.13
This tag is about bringing the EMAC support to the H3 boards.
* tag 'sunxi-dt-h3-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E
arm: sun8i: orangepi-zero: Enable dwmac-sun8i
ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i
ARM: sun8i: orangepi-plus: Enable dwmac-sun8i
arm: sun8i: nanopi-neo: Enable dwmac-sun8i
arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high
arm: sun8i: orangepi-2: Enable dwmac-sun8i
arm: sun8i: orangepi-one: Enable dwmac-sun8i
arm: sun8i: orangepi-pc: Enable dwmac-sun8i
arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros
Signed-off-by: Olof Johansson <olof@lixom.net>
A few fixes around the PRCM support that got in 4.12 with a wrong
compatible, and a missing clock in the binding.
-----BEGIN PGP SIGNATURE-----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=WD1J
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Allwinner fixes for 4.12
A few fixes around the PRCM support that got in 4.12 with a wrong
compatible, and a missing clock in the binding.
* tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
arm64: allwinner: h5: Remove syslink to shared DTSI
ARM: sunxi: h3/h5: fix the compatible of R_CCU
Signed-off-by: Olof Johansson <olof@lixom.net>
The usual chunk of patches. The most notable improvements are the power
supplies improvements (battery and AC-IN), crypto support for the sun5i
family, HDMI support for the A10s, plus a lot of new things for the V3S and
the A83T.
-----BEGIN PGP SIGNATURE-----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=fwEx
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.13
The usual chunk of patches. The most notable improvements are the power
supplies improvements (battery and AC-IN), crypto support for the sun5i
family, HDMI support for the A10s, plus a lot of new things for the V3S and
the A83T.
* tag 'sunxi-dt-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (47 commits)
ARM: sun6i: a31s: primo81: Enable battery power supply
ARM: sun6i: a31s: primo81: Change USB OTG to OTG mode
ARM: sun8i: a83t: Add dt node for the syscon control module
ARM: sun8i: a83t: Add device node for R_PIO
ARM: sun8i: v3s: add device nodes for DE2 display pipeline
ARM: dts: sunxi: add SoC specific compatibles for the crypto nodes
ARM: sun5i: add a cryptographic engine node
ARM: sun8i: a83t: Add device node for PRCM
ARM: dts: sun8i: h3: Add initial NanoPi M1 Plus support
ARM: dts: orange-pi-zero: add node for SPI NOR
ARM: sun7i: a20: cubietruck: Tie AXP209's USB power supply to USB PHY
ARM: sun6i: a31: hummingbird: Enable AXP221's ACIN power supply
ARM: sun4i: a10: cubieboard: Enable AXP209's ACIN power supply
ARM: sun7i: a20: bananapi-m1-plus: Enable AXP209's ACIN power supply
ARM: sun7i: a20: cubieboard2: Enable AXP209's ACIN power supply
ARM: sun7i: a20: cubieboard2: Move usb_otg node for alphabetical ordering
ARM: sun8i: a83t: cubietruck-plus: Enable SPDIF output
ARM: sun8i: a83t: cubietruck-plus: Add LED device nodes
ARM: sun8i: a83t: Add device node for SPDIF transmitter
ARM: sun8i: a83t: Add device node for DMA controller
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- minor reorganization to support different busses
- add/use real clock controller
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3gA0
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic 32-bit DT changes for v4.13:
- minor reorganization to support different busses
- add/use real clock controller
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8: add and use the real clock controller
ARM: dts: meson: Extend L2 cache controller node for Meson8 and Meson8b
ARM: dts: meson8b: inherit meson.dtsi from meson8b.dtsi
ARM: dts: meson: organize devices in their corresponding busses
Signed-off-by: Olof Johansson <olof@lixom.net>
Note that Baruch's changes are fixes that are currently included in v4.12-rc2,
but they are also included here in order to keep this tag based off v4.12-rc1.
Please pull the following:
- Rafal adds CPU and thermal zones to the Northstar (BCM5301X) Device Tree and he
also adds the MDIO controller nodes for later use by USB PHYs
- Eric adds support for the V3D engine and Ethernet switch on the Cygnus
platforms, he also adds a set of Device Tree sources and include files for the
Raspberry Pi 3 (BCM2837) to be used with the ARM/Linux kernel,
- Jon adds CPU and thermal zones to the Northstar Plus Device Tree files
- Stefan updates the Raspberry Pi DTS files with thermal trip points and zones,
adds support for the USB OTG on the Raspberry Pi Zero which includes the
proper dwc2 configuration, a generic USB PHY and finally the enabling of the
OTG controller by including the proper DTS include file
- Gerd switches the Raspberry Pi DTS files to use the SDHOST controller (faster
than the SDHCI)
-----BEGIN PGP SIGNATURE-----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=aDbe
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.13/devicetree' of http://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM-based Device Tree changes for 4.13.
Note that Baruch's changes are fixes that are currently included in v4.12-rc2,
but they are also included here in order to keep this tag based off v4.12-rc1.
Please pull the following:
- Rafal adds CPU and thermal zones to the Northstar (BCM5301X) Device Tree and he
also adds the MDIO controller nodes for later use by USB PHYs
- Eric adds support for the V3D engine and Ethernet switch on the Cygnus
platforms, he also adds a set of Device Tree sources and include files for the
Raspberry Pi 3 (BCM2837) to be used with the ARM/Linux kernel,
- Jon adds CPU and thermal zones to the Northstar Plus Device Tree files
- Stefan updates the Raspberry Pi DTS files with thermal trip points and zones,
adds support for the USB OTG on the Raspberry Pi Zero which includes the
proper dwc2 configuration, a generic USB PHY and finally the enabling of the
OTG controller by including the proper DTS include file
- Gerd switches the Raspberry Pi DTS files to use the SDHOST controller (faster
than the SDHCI)
* tag 'arm-soc/for-4.13/devicetree' of http://github.com/Broadcom/stblinux:
ARM: dts: bcm2835-rpi-zero: Enable OTG mode
ARM: dts: bcm283x: Add generic USB PHY
ARM: dts: bcm283x: Add dtsi for OTG mode
ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY
ARM: dts: NSP: Add Thermal Support
ARM: dts: Cygnus: Add BCM11360's V3D device
ARM: dts: BCM5301X: Specify MDIO bus in the DT
ARM: dts: BCM5301X: Add CPU thermal sensor and zone
ARM: dts: bcm283x: switch from &sdhci to &sdhost
ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
Signed-off-by: Olof Johansson <olof@lixom.net>
* Split LCD mux and gpio on armadillo800eva board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oB4F
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/fixes-non-critical
Second Round of Renesas ARM Based SoC Fixes for v4.12
* Split LCD mux and gpio on armadillo800eva board
* tag 'renesas-fixes2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: armadillo800eva: Split LCD mux and gpio
Signed-off-by: Olof Johansson <olof@lixom.net>
following (and including) the new Mali Midgard binding; a lot of
improvements for the rk3228/rk3229 socs (tsadc, operating points,
usb, clock-rates, pinctrl, watchdog); finalizing the rk1108->rv1108
rename and adc buttons for the rk3288 firefly boards.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlk5x+gQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVOmB/sHN5YBQCwdlermcO75CiLktacneQ6qcom2
GCBHfKwXxmey7puB8cKfQ1IgvvsKmXU1+QbUDjxD13p7b139WVRM3VEokOiSR7cl
XjGFFy9u6ECfPRpJfPBN/8oENcZ1N94S3gfhCwgcF6JDkumMI4DWVTLD4lZLeIcR
LTfZMddSevITXMzrWh0+Q9/TgnJbD58x4lSxs5m85h/8JDSfqdsijs/j2HJrBHPv
01NwQBm8w6rmTNL3UGfqDeUZTnmaczXRf2sgEr5ORLln2Qn++FpUaJiRPUdtYRs7
NEWLppFQeykoxgTQnttkt8oOyaKfNS3PsvwgA7R35w5HnbEtXcDK
=b2HZ
-----END PGP SIGNATURE-----
Merge tag 'v4.13-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
A bunch of changes including mali gpu nodes for rk3288 boards
following (and including) the new Mali Midgard binding; a lot of
improvements for the rk3228/rk3229 socs (tsadc, operating points,
usb, clock-rates, pinctrl, watchdog); finalizing the rk1108->rv1108
rename and adc buttons for the rk3288 firefly boards.
* tag 'v4.13-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable usb for rk3229 evb board
ARM: dts: rockchip: add usb nodes on rk322x
ARM: dts: rockchip: add adc button for Firefly
ARM: dts: rockchip: enable ARM Mali GPU on rk3288-veyron
ARM: dts: rockchip: enable ARM Mali GPU on rk3288-firefly
ARM: dts: rockchip: enable ARM Mali GPU on rk3288-rock2-som
ARM: dts: rockchip: add ARM Mali GPU node for rk3288
dt-bindings: gpu: add bindings for the ARM Mali Midgard GPU
ARM: dts: rockchip: set a sane frequence for tsadc on rk322x
ARM: dts: rockchip: add operating-points-v2 for cpu on rk322x
ARM: dts: rockchip: set default rates for core clocks on rk322x
ARM: dts: rockchip: add second uart2 pinctrl on rk322x
ARM: dts: rockchip: correct rk322x uart2 pinctrl
ARM: dts: rockchip: add watchdog device node on rk322x
clk: rockchip: add clock-ids for more rk3228 clocks
clk: rockchip: add ids for camera on rk3399
ARM: dts: rockchip: fix rk322x i2s1 pinctrl error
ARM: dts: rockchip: rename RK1108-evb to RV1108-evb
ARM: dts: rockchip: rename core dtsi from RK1108 to RV1108
ARM: dts: rockchip: Setup usb vbus-supply on rk3288-rock2
Signed-off-by: Olof Johansson <olof@lixom.net>
EV3 battery support, DMA support for MUSB, and non-critical fixes to
GPIO nodes of DA850's GPIO controller and GPIO expander available on
DA850 EVM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZLlm
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.13/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
Miscellaneous DT support updates for DA850. Includes Lego mindstorms
EV3 battery support, DMA support for MUSB, and non-critical fixes to
GPIO nodes of DA850's GPIO controller and GPIO expander available on
DA850 EVM.
* tag 'davinci-for-v4.13/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-evm: fix tca6416 for use with GPIO hogs
ARM: dts: da850: Add interrupt-controller property to gpio node
ARM: dts: da850: Add CPPI 4.1 DMA to USB OTG controller
ARM: dts: da850-lego-ev3: Add node for LEGO MINDSTORMS EV3 Battery
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds support for am335x-boneblue. The rest of
the changes are for enabling features on various
devices with the git shortlog describing the changes.
-----BEGIN PGP SIGNATURE-----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=u58m
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.13/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Device tree changes for omaps for v4.13 merge window.
This adds support for am335x-boneblue. The rest of
the changes are for enabling features on various
devices with the git shortlog describing the changes.
* tag 'omap-for-v4.13/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm: dts: am33xx: Remove redundant interrupt-parent property
ARM: dts: bonegreen-wireless: add WL1835 Bluetooth device node
ARM: dts: AM43XX: Remove min and max voltage values for dcdc3
ARM: dts: Add am335x-boneblue
ARM: dts: twl4030: Add missing madc reference for bci subnode
ARM: dts: am43xx-clocks: Add support for CLKOUT2
ARM: dts: Configure USB host for 37xx-evm
ARM: dts: omap: Add generic compatible string for I2C EEPROM
ARM: dts: Enable earlycon stdout path for LogicPD torpedo
ARM: dts: Enable earlycon stdout path for duovero
arm: dts: boneblack-wireless: add WL1835 Bluetooth device node
ARM: dts: am571x-idk: Enable the system mailboxes 5 and 6
ARM: dts: am572x-idk: Enable the system mailboxes 5 and 6
ARM: dts: omap4-devkit8000: fix gpmc ranges property
ARM: dts: omap3: Remove 'enable-active-low' property
ARM: dts: OMAP5: uevm: add µSD card detect
ARM: dts: omap4-droid4: Add bluetooth
ARM: dts: dra7x-evm: Enable dual-role mode for USB1
ARM: dts: Use - instead of @ for DT OPP entries for TI SoCs
ARM: dts: am335x-phycore-som: fix rv4162 compatible
Signed-off-by: Olof Johansson <olof@lixom.net>
for claiming SPI pins, and to fix a SDIO card detect
pin for production version of the device.
-----BEGIN PGP SIGNATURE-----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=e4F/
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.12/fixes-sl50' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Two fixes for am335x-sl50 to fix a boot time error
for claiming SPI pins, and to fix a SDIO card detect
pin for production version of the device.
* tag 'omap-for-v4.12/fixes-sl50' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
ARM: dts: am335x-sl50: Fix card detect pin for mmc1
Signed-off-by: Olof Johansson <olof@lixom.net>
The cm-fx6 module has an on-board AW-NH387 WiFi/BT module which is
based on Marvell's SD8787 chip and is connected to the usdhc1
controller.
Unfortunately, the chip gets unresponsive if the Bluetooth AMP
(Alternate Mac/Phy) function gets probed but the loaded firmware
doesn't support it. For instance, this is the case for the most
recent firmware in linux-firmware (Version 14.66.35.p52).
Thus, just add the required nodes but leave the usdhc1 node disabled
explicitly. Users who disabled the Bluetooth (AMP) support of their
OS can then conveniently enable WiFi (or even plain Bluetooth) support
with a simple device tree overlay/bootloader configuration.
Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The "test" and "conf" nand partitions partly overlap:
Creating 6 MTD partitions on "orion_nand":
0x000000000000-0x000000090000 : "uboot"
0x000000090000-0x0000000d4000 : "env"
0x0000000d4000-0x0000000f8000 : "test"
0x0000000f4000-0x0000004f4000 : "conf"
That is unlikely to be desired, and not matching the partition map used in
u-boot - So adjust the test partition size to fix this.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The Linksys WRT3200ACM (Rango) is the lates Armada-385 based router in
the Linksys WRT AC Series which got released in October 2016.
Key differences to the earlier Armada-385 based devices in the series is
a bigger flash chip, next generation wireless modules (Marvell 88W8964)
in the mini pcie slots as well as a Marvell SD8887. Finally the CPU is
clocked at 1866 GHz by default.
The file armada-385-linksys-rango.dts is loosly based off of a DTS
authored by Imre Kaloz.
As Rango is part of the armada-385-linksys family of boards use the
armada-385-linksys.dtsi as basis. As for functional differences to Imre
Kaloz dts, the wlan LEDs aren't connected to the expander chip pca9635
but directly to GPIOs. Then mpp47 controls the USB2.0 port and not the
USB3.0 port, so use the correct GPIO mpp44 for it. Finally use
non-removable instead of broken-cd with the sdhci node to avoid polling.
Other changes can be categorized as just cleanup / reorganization due to
using the armada-385-linksys.dtsi.
URL: 0abc3fa5a9/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Buttons don't have a reg property; drop pseudo address and fixup names
of individual button nodes. Also drop #address-cells and #size-cells
properties.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
A pin group per node is sufficient, further specialization only serves
as documentation which can be a comment just as well. This simplifies
configuring pins for nodes in dependants.
Also use labels which end up right by the node they are intended for.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Move the partition layout to individual boards. The Linksys WRT 3200 ACM
(Rango) comes with a 256MiB nand flash chip and different layout.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Use IEEE 1541-2002 unit prefixes for sizes.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The new ones work so there is little reason to keep the legacy bindings.
Use the rework as the opportunity to drop the legacy node.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Now that we use the reference for the USB3.0 port update the node name
and labels for the phy and vbus to match the label used by
armada-38x.dtsi.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Which pools we assing doesn't matter. Use the order which doesen't leave
a chance for questions for first time readers.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Drop redundant declaration of #address-cells and #size-cells.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Flatten dts of individual boards to match the new style used in
armada-385-linksys.dtsi and for the Rango addition.
* Caiman - Linksys WRT1200AC v1 & v2
* Cobra - Linksys WRT1900AC v2
* Shelby - Linksys WRT1900ACS v1 & v2
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add labels to nodes used by dependants. Also rename node gpio_keys to
gpio-keys to match the style of the rest of the file as well as the
documented example.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Since the addition of the spi reference two styles are used. Use
references instead of recreating the same structure over and over again.
This helps to distinguish which are changes to the underlying nodes and
which are new additions and helps maintainability in general.
Verified the resulting dtb to be binary identical.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
There is no rtc for the 98dx3236 and derivative SoCs. Disable the rtc
node inherited from the armada-370-xp base.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The 98dx4251 has 4 interrupts for the packet processor whereas the
98dx3236 and 98dx3336 only have 3.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The mvebu GPIO driver can also perform PWM on some pins. Use the pwm-fan
driver to control the fan of the WRT1900AC, giving us finer grained control
over its speed and hence noise.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
URL: https://patchwork.ozlabs.org/patch/427291/
[Ralph Sennhauser: drop flags paramter from pwms, no longer used]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add the required properties to the GPIO nodes for them to be used as PWM
lines.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add properties to the GPIO nodes for Armada 370/XP to allow them to be
also used as PWM lines.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
URL: https://patchwork.ozlabs.org/patch/427294/
[Ralph Sennhauser: Add new compatible string marvell,armada-370-gpio]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Until now clk81 was used as gate clock for the ethernet controller on
Meson8 whereas Meson8b did not configure a gate clock at all. Use
CLKID_ETH for both SoCs, which is the real gate clock for the ethernet
controller.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Amlogic's Meson8b SoC has a Snoop Control Unit (SCU), just like many
other Cortex-A5 SoCs. Add the corresponding devicetree node so it can be
used during SMP boot.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This adds the DWC2 USB controller nodes and the corresponding USB2 PHY
nodes to meson.dtsi (as the same - or at least a very similar) IP block
is used on all SoCs (at the same physical address).
Additionally meson8.dtsi and meson8b.dtsi add the required clocks to the
DWC2 and USB2 PHY nodes, otherwise the DWC2 controller cannot be
initialized by the dwc2 driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
All supported Meson SoCs have a random number generator in CBUS.
Newer SoCs (GXBB, GXL and GXM) provide only one 32-bit random number
register, whereas the older SoCs (Meson6, Meson8 and Meson8b) have two
32-bit random number registers. The existing meson-rng driver only
supports the lower 32-bit - but it still works fine on the older SoCs
apart from this small limitation.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
There seem to be two memory regions that need to be reserved, otherwise
the system just hangs when running:
$ stress --vm-bytes $(awk '/MemFree/{printf "%d\n", $2 * 0.9;}' < /proc/meminfo)k \
--vm-keep -m 1
The first memory region is really crucial and without it the system
hangs. I could not find any references to this in Amlogic's GPL kernel
sources.
The second region is used by the "suspend firmware". The u-boot sources
(/arch/arm/cpu/aml_meson/m8/firmwareld.c) state that the suspend
firmware is located at "64M + 15M" which matches CONFIG_MESON_SUSPEND in
the Amlogic GPL kernel sources. The "suspend firmware" is responsible
for waking up the system from suspend state.
This also fixes reading the full SD card as without this the system
would simply hang (probably related to the first memory region, if some
buffer is allocated there).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This adds the SAR ADC to meson.dtsi and configures the clocks on Meson8
and Meson8b to allow boards to use it. Some boards use it to connect a
button to it.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This adds the definition of the PWM_E (CBUS) and PWM_F (AOBUS) to
meson8.dtsi, allowing devices to use them. PWM_E can be used on some
devices to generate the 32.768kHz clock for the SDIO wifi module, while
PWM_F can be used to control the power LED.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This makes meson.dtsi easier to read as we are not using magic numbers
for the GIC interrupt type (GIC_SPI) and the interrupt polarity
(IRQ_TYPE_EDGE_RISING).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This replaces the "/include/" syntax with the "#include" syntax in all
Amlogic Meson .dts and .dtsi files. That is required to use preprocessor
defines (like GIC_SPI and IRQ_TYPE_EDGE_RISING) in meson.dtsi (all files
which directly or indirectly include meson.dtsi need to use the
"#include" syntax, otherwise the .dts files cannot be compiled).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The IR receiver pins are currently defined in the CBUS pin-controller.
However the pins are in the AO region, which is controlled by the AOBUS
pin-controller. Move the pins to pinctrl_aobus so they can actually be
used.
Fixes: b60e1157d8 ("ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This reset gpio is active low, therefore fix from active high to low.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Odroid-U3 board has an IP4791CZ12 level shifter that is
disabled if the HPD is low, which means that the CEC pin is
disabled as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
qoriq clock driver has been updated to parse the clock configuration
information defined in driver itself not in dts.
Since the new implementation and the bindings have been merged,
it is time to update the clock related node and remove redundent clock
configuration information from the dts.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The MSI Primo81 tablet has a 3500 mAh 3.7V LiPo battery.
Enable the PMIC's battery power supply so the battery can be monitored.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Now that we have support for the AXP221 PMIC's USB VBUS detection and
DRIVEVBUS vbus control, we can use the USB OTG port in proper OTG mode.
This patch enables the aforementioned PMIC functions, adds the OTG ID
detection pin to the USB PHY node, and changes the mode of USB OTG to
"otg".
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch add the dt node for the syscon register present on the
Allwinner A83T
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enables the ADV7180 decoder sensor. The ADV7180 connects to the
parallel-bus mux input on ipu1_csi0_mux.
The ADV7180 power pin is via max7310_b port expander.
Changes from Tim Harvey:
- Use IRQ_TYPE_LEVEL_LOW instead of 0x8 for interrupt type for clarity.
- For 8-bit parallel IPU1-CSI0 bus connection only data[12-19] are used.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The reset pin to the port expander chip (MAX7310) is controlled by a gpio,
so define a reset-gpios property to control it. There are three MAX7310's
on the SabreAuto CPU card (max7310_[abc]), but all use the same pin for
their reset. Since all can't acquire the same pin, assign it to max7310_b,
that chip is needed by more functions (usb and adv7180).
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The sabreauto uses a steering pin to select between the SDA signal on
i2c3 bus, and a data-in pin for an SPI NOR chip. Use i2cmux to control
this steering pin. Idle state of the i2cmux selects SPI NOR. This is not
a classic way to use i2cmux, since one side of the mux selects something
other than an i2c bus, but it works and is probably the cleanest
solution. Note that if one thread is attempting to access SPI NOR while
another thread is accessing i2c3, the SPI NOR access will fail since the
i2cmux has selected the SDA pin rather than SPI NOR data-in. This couldn't
be avoided in any case, the board is not designed to allow concurrent
i2c3 and SPI NOR functions (and the default device-tree does not enable
SPI NOR anyway).
Devices hanging off i2c3 should now be defined under i2cmux, so
that the steering pin can be properly controlled to access those
devices. The port expanders (MAX7310) are thus moved into i2cmux.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables the OV5642 parallel-bus sensor, and the OV5640 MIPI CSI-2 sensor.
The OV5642 connects to the parallel-bus mux input port on ipu1_csi0_mux.
The OV5640 connects to the input port on the MIPI CSI-2 receiver on
mipi_csi.
Until the OV5652 sensor module compatible with the SabreSD becomes
available for testing, the ov5642 node is currently disabled.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
