The SDEI stack helper functions are only used by _on_sdei_stack() and
refer to symbols (e.g. sdei_stack_normal_ptr) that are only defined if
CONFIG_VMAP_STACK=y.
Mark these functions as static, so we don't run into errors at link-time
due to references to undefined symbols. Stick all the parameters onto
the same line whilst we're passing through.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Include KASLR offset in arm64 VMCOREINFO ELF notes to assist in
debugging. vmcore parsing in user-space already expects this value in
the notes and we are providing it for portability of those existing
tools with x86.
Ideally we would like core code to do this (so that way this
information won't be missed when an architecture adds KASLR support),
but mips has CONFIG_RANDOMIZE_BASE, and doesn't provide kaslr_offset(),
so I am not sure if this is needed for mips (and other such similar arch
cases in future). So, lets keep this architecture specific for now.
As an example of a user-space use-case, consider the
makedumpfile user-space utility which will need fixup to use this
KASLR offset to work with cases where we need to find a way to
translate symbol address from vmlinux to kernel run time address
in case of KASLR boot on arm64.
I have already submitted the makedumpfile user-space patch upstream
and the maintainer has suggested to wait for the kernel changes to be
included (see [0]).
I tested this on my qualcomm amberwing board both for KASLR and
non-KASLR boot cases:
Without this patch:
# cat > scrub.conf << EOF
[vmlinux]
erase jiffies
erase init_task.utime
for tsk in init_task.tasks.next within task_struct:tasks
erase tsk.utime
endfor
EOF
# makedumpfile --split -d 31 -x vmlinux --config scrub.conf vmcore dumpfile_{1,2,3}
readpage_elf: Attempt to read non-existent page at 0xffffa8a5bf180000.
readmem: type_addr: 1, addr:ffffa8a5bf180000, size:8
vaddr_to_paddr_arm64: Can't read pgd
readmem: Can't convert a virtual address(ffff0000092a542c) to physical
address.
readmem: type_addr: 0, addr:ffff0000092a542c, size:390
check_release: Can't get the address of system_utsname
After this patch check_release() is ok, and also we are able to erase
symbol from vmcore (I checked this with kernel 4.18.0-rc4+):
# makedumpfile --split -d 31 -x vmlinux --config scrub.conf vmcore dumpfile_{1,2,3}
The kernel version is not supported.
The makedumpfile operation may be incomplete.
Checking for memory holes : [100.0 %] \
Checking for memory holes : [100.0 %] |
Checking foExcluding unnecessary pages : [100.0 %]
\
Excluding unnecessary pages : [100.0 %] \
The dumpfiles are saved to dumpfile_1, dumpfile_2, and dumpfile_3.
makedumpfile Completed.
[0] https://www.spinics.net/lists/kexec/msg21195.html
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Acked-by: James Morse <james.morse@arm.com>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
It is useful to get the running time of a thread. Doing so in an
efficient manner can be important for performance of user applications.
Avoiding system calls in `clock_gettime` when handling
CLOCK_THREAD_CPUTIME_ID is important. Other clocks are handled in the
VDSO, but CLOCK_THREAD_CPUTIME_ID falls back on the system call.
CLOCK_THREAD_CPUTIME_ID is not handled in the VDSO since it would have
costs associated with maintaining updated user space accessible time
offsets. These offsets have to be updated everytime the a thread is
scheduled/descheduled. However, for programs regularly checking the
running time of a thread, this is a performance improvement.
This patch takes a middle ground, and adds support for cap_user_time an
optional feature of the perf_event API. This way costs are only
incurred when the perf_event api is enabled. This is done the same way
as it is in x86.
Ultimately this allows calculating the thread running time in userspace
on aarch64 as follows (adapted from perf_event_open manpage):
u32 seq, time_mult, time_shift;
u64 running, count, time_offset, quot, rem, delta;
struct perf_event_mmap_page *pc;
pc = buf; // buf is the perf event mmaped page as documented in the API.
if (pc->cap_usr_time) {
do {
seq = pc->lock;
barrier();
running = pc->time_running;
count = readCNTVCT_EL0(); // Read ARM hardware clock.
time_offset = pc->time_offset;
time_mult = pc->time_mult;
time_shift = pc->time_shift;
barrier();
} while (pc->lock != seq);
quot = (count >> time_shift);
rem = count & (((u64)1 << time_shift) - 1);
delta = time_offset + quot * time_mult +
((rem * time_mult) >> time_shift);
running += delta;
// running now has the current nanosecond level thread time.
}
Summary of changes in the patch:
For aarch64 systems, make arch_perf_update_userpage update the timing
information stored in the perf_event page. Requiring the following
calculations:
- Calculate the appropriate time_mult, and time_shift factors to convert
ticks to nano seconds for the current clock frequency.
- Adjust the mult and shift factors to avoid shift factors of 32 bits.
(possibly unnecessary)
- The time_offset userspace should apply when doing calculations:
negative the current sched time (now), because time_running and
time_enabled fields of the perf_event page have just been updated.
Toggle bits to appropriate values:
- Enable cap_user_time
Signed-off-by: Michael O'Farrell <micpof@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When kernel mode NEON was first introduced to the arm64 kernel,
every call to kernel_neon_begin()/_end() stacked resp. unstacked
the entire NEON register file, making it worthwile to reduce the
number of used NEON registers to a bare minimum, and only stack
those. kernel_neon_begin_partial() was introduced for this purpose,
but after the refactoring for SVE and other changes, it no longer
exists and was simply #define'd to kernel_neon_begin() directly.
In the mean time, all users have been updated, so let's remove
the fallback macro.
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
machine_kexec flushes the reboot_code_buffer from the icache
after stopping the other cpus.
Commit 3b8c9f1cdf ("arm64: IPI each CPU after invalidating the I-cache
for kernel mappings") added an IPI call to flush_icache_range, which
causes a hang here, so replace the call with __flush_icache_range
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We always run userspace with interrupts enabled, but with the recent
conversion of the syscall entry/exit code to C, we don't inform the
hardirq tracing code that interrupts are about to become enabled by
virtue of restoring the EL0 SPSR.
This patch ensures that trace_hardirqs_on() is called on the syscall
return path when we return to the assembly code with interrupts still
disabled.
Fixes: f37099b699 ("arm64: convert syscall trace logic to C")
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Merge misc fixes from Andrew Morton:
"11 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kvm, mm: account shadow page tables to kmemcg
zswap: re-check zswap_is_full() after do zswap_shrink()
include/linux/eventfd.h: include linux/errno.h
mm: fix vma_is_anonymous() false-positives
mm: use vma_init() to initialize VMAs on stack and data segments
mm: introduce vma_init()
mm: fix exports that inadvertently make put_page() EXPORT_SYMBOL_GPL
ipc/sem.c: prevent queue.status tearing in semop
mm: disallow mappings that conflict for devm_memremap_pages()
kasan: only select SLUB_DEBUG with SYSFS=y
delayacct: fix crash in delayacct_blkio_end() after delayacct init failure
Pull in arm perf updates, including support for 64-bit (chained) event
counters and some non-critical fixes for some of the system PMU drivers.
Signed-off-by: Will Deacon <will.deacon@arm.com>
The xen-privcmd driver, which can be modular, calls set_pte_at()
which in turn may call __sync_icache_dcache().
The call to __sync_icache_dcache() may be optimised out because it is
conditional on !pte_special(), and xen-privcmd calls pte_mkspecial().
But it seems unwise to rely on this optimisation.
Fixes: 3ad0876554 ("xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit b73b7ac0a7 ("crypto: sha256_generic - add cra_priority") gave
sha256-generic and sha224-generic a cra_priority of 100, to match the
convention for generic implementations. But sha256-arm64 and
sha224-arm64 also have priority 100, so their order relative to the
generic implementations became ambiguous.
Therefore, increase their priority to 125 so that they have higher
priority than the generic implementations but lower priority than the
NEON implementations which have priority 150.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make sure to initialize all VMAs properly, not only those which come
from vm_area_cachep.
Link: http://lkml.kernel.org/r/20180724121139.62570-3-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- add EINT support
- add gpio-ranges property to pinctrl
- add earlycon to rfb1 to find boot errros more easily
- fix uart clock
- add iommu and smi bindings
- mt6797:
- add support for the 96 board x20 development board
- fix cooling-cells of mt7622 and mt8173
-----BEGIN PGP SIGNATURE-----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=+G4b
-----END PGP SIGNATURE-----
Merge tag 'v4.18-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt
- mt7622:
- add EINT support
- add gpio-ranges property to pinctrl
- add earlycon to rfb1 to find boot errros more easily
- fix uart clock
- add iommu and smi bindings
- mt6797:
- add support for the 96 board x20 development board
- fix cooling-cells of mt7622 and mt8173
* tag 'v4.18-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: Add Mediatek X20 Development Board support
dt-bindings: arm: mediatek: Document Mediatek X20 Development Board
dt-bindings: mediatek: Add binding for mt2712 IOMMU and SMI
arm64: dts: mt7622: update a clock property for UART0
arm64: dts: mt7622: add earlycon to mt7622-rfb1 board
arm64: dts: mt7622: use gpio-ranges to pinctrl device
arm64: dts: mediatek: Add missing cooling device properties for CPUs
arm64: dts: mt7622: add EINT support to pinctrl
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds support for the STACKLEAK gcc plugin to arm64 by implementing
stackleak_check_alloca(), based heavily on the x86 version, and adding the
two helpers used by the stackleak common code: current_top_of_stack() and
on_thread_stack(). The stack erasure calls are made at syscall returns.
Additionally, this disables the plugin in hypervisor and EFI stub code,
which are out of scope for the protection.
Acked-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In preparation for enabling the stackleak plugin on arm64,
we need a way to get the bounds of the current stack. Extend
on_accessible_stack to get this information.
Acked-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
[will: folded in fix for allmodconfig build breakage w/ sdei]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Some interesting changes, especially:
- MMC support for the H6
- PMIC support for the PineH64
- HDMI simplefb support for the A64
- PWM support for the A64
- New board: Pinebook, Amarula A64-Relic
-----BEGIN PGP SIGNATURE-----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=MH+c
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner arm64 DT changes for 4.19
Some interesting changes, especially:
- MMC support for the H6
- PMIC support for the PineH64
- HDMI simplefb support for the A64
- PWM support for the A64
- New board: Pinebook, Amarula A64-Relic
* tag 'sunxi-dt64-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (22 commits)
arm64: allwinner: h6: enable MMC0/2 on Pine H64
arm64: allwinner: h6: add device tree nodes for MMC controllers
dt-binding: mmc: sunxi: add H6 compatible (with A64 fallback)
arm64: dts: allwinner: a64: Remove unused address-cells/size-cells of dwmac-sun8i
arm64: dts: allwinner: h6: enable AXP805 PMIC on Pine H64
arm64: dts: allwinner: h6: Use macros for R_CCU clock and reset indices
arm64: dts: allwinner: a64: add HDMI regulator to all DTs' simplefb_hdmi
arm64: dts: allwinner: a64: add device tree node for HDMI simplefb
arm64: dts: allwinner: a64: add necessary device tree nodes for DE2 CCU
arm64: dts: allwinner: h6: Add LED device nodes for Pine H64
arm64: allwinner: a64: allow laptops to wake up from lid
arm64: allwinner: a64: change TERES-I DLDO3's name to start with "vdd"
arm64: allwinner: a64-sopine: Add cd-gpios to mmc0 node
arm64: dts: allwinner: a64: add SRAM controller device tree node
arm64: dts: allwinner: add support for Pinebook
arm64: dts: allwinner: a64: Add PWM controllers
arm64: dts: allwinner: a64: add R_I2C controller
arm64: allwinner: a64-amarula-relic: Enable AP6330 WiFi support
arm64: allwinner: a64: Add RTC clock to phandle 32kHz external oscillator
arm64: allwinner: a64: Add Amarula A64-Relic initial support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- new SoC: S905W
- new boards: based on S905W: Amlogic P281, Oranth Tanix TX3 Mini
- AXG: add DT for new audio clock controller
-----BEGIN PGP SIGNATURE-----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=bHuf
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt64-2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic 64-bit DT changes for v4.19, round 2
- new SoC: S905W
- new boards: based on S905W: Amlogic P281, Oranth Tanix TX3 Mini
- AXG: add DT for new audio clock controller
* tag 'amlogic-dt64-2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-gxl: add support for the Oranth Tanix TX3 Mini
ARM64: dts: meson-gxl: add support for the S905W SoC and the P281 board
dt-bindings: arm: amlogic: Add support for the Oranth Tanix TX3 Mini
dt-bindings: arm: amlogic: Add support for GXL S905W and the P281 board
dt-bindings: add vendor prefix for Shenzhen Oranth Technology Co., Ltd.
ARM64: dts: meson-axg: add the audio clock controller
clk: meson: expose GEN_CLK clkid
clk: meson-axg: add pcie and mipi clock bindings
dt-bindings: clock: add meson axg audio clock controller bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
On Spreadtrum platform, the current clocksource for timekeeping will be
stopped in suspend state, thus add one always-on timer to calculate the
suspend time.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add the Spreadtrum SC27XX PMICs ADC device node which contains 32 channels.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds the eFuse device node for Spreadtrum SC27XX PMICs.
The SC27XX eFuse contains 32 blocks and each block's data width is
16 bits.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds the vibrator device node for Spreadtrum SC27XX PMICs.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The SC27xx breathing light controller can support 3 outputs:
red LED, green LED and blue LED.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add support for PM8005/PM8998 and related nodes
* Add/fix nodes on SDM845 for I2c, SPI, UART, and RPMH
* Fix BT LED trigger on DB410c
* Drop legacy clock names on MSM8916
* Add gpio line names on DB820c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DQjU
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.19
* Add support for PM8005/PM8998 and related nodes
* Add/fix nodes on SDM845 for I2c, SPI, UART, and RPMH
* Fix BT LED trigger on DB410c
* Drop legacy clock names on MSM8916
* Add gpio line names on DB820c
* tag 'qcom-arm64-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: qcom: db410c: Fix Bluetooth LED trigger
arm64: dts: sdm845: Default qupv3_id_0 as "disabled" like _id_1
arm64: dts: msm8916: drop legacy suffix for clocks used by MSM DRM driver
arm64: dts: qcom: db820c: Add gpio-line-names property
arm64: dts: sdm845: Add rpmh-clk node
arm64: dts: sdm845: Add rpmh-rsc node
arm64: dts: qcom: sdm845: Enable debug UART and I2C10 on sdm845-mtp
arm64: dts: qcom: sdm845: Add I2C, SPI, and UART9 nodes
arm64: dts: qcom: Add pm8005 and pm8998 support
arm64: dts: qcom: Add pmu node to sdm845
Signed-off-by: Olof Johansson <olof@lixom.net>
Arnd reports the following arm64 randconfig build error with the PSI
patches that add another page flag:
/git/arm-soc/arch/arm64/mm/init.c: In function 'mem_init':
/git/arm-soc/include/linux/compiler.h:357:38: error: call to
'__compiletime_assert_618' declared with attribute error: BUILD_BUG_ON
failed: sizeof(struct page) > (1 << STRUCT_PAGE_MAX_SHIFT)
The additional page flag causes other information stored in
page->flags to get bumped into their own struct page member:
#if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT+LAST_CPUPID_SHIFT <=
BITS_PER_LONG - NR_PAGEFLAGS
#define LAST_CPUPID_WIDTH LAST_CPUPID_SHIFT
#else
#define LAST_CPUPID_WIDTH 0
#endif
#if defined(CONFIG_NUMA_BALANCING) && LAST_CPUPID_WIDTH == 0
#define LAST_CPUPID_NOT_IN_PAGE_FLAGS
#endif
which in turn causes the struct page size to exceed the size set in
STRUCT_PAGE_MAX_SHIFT. This value is an an estimate used to size the
VMEMMAP page array according to address space and struct page size.
However, the check is performed - and triggers here - on a !VMEMMAP
config, which consumes an additional 22 page bits for the sparse
section id. When VMEMMAP is enabled, those bits are returned, cpupid
doesn't need its own member, and the page passes the VMEMMAP check.
Restrict that check to the situation it was meant to check: that we
are sizing the VMEMMAP page array correctly.
Says Arnd:
Further experiments show that the build error already existed before,
but was only triggered with larger values of CONFIG_NR_CPU and/or
CONFIG_NODES_SHIFT that might be used in actual configurations but
not in randconfig builds.
With longer CPU and node masks, I could recreate the problem with
kernels as old as linux-4.7 when arm64 NUMA support got added.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Fixes: 1a2db30034 ("arm64, numa: Add NUMA support for arm64 platforms.")
Fixes: 3e1907d5bf ("arm64: mm: move vmemmap region right below the linear region")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Since commit d3aec8a28b ("arm64: capabilities: Restrict KPTI
detection to boot-time CPUs") we rely on errata flags being already
populated during feature enumeration. The order of errata and
features was flipped as part of commit ed478b3f9e ("arm64:
capabilities: Group handling of features and errata workarounds").
Return to the orginal order of errata and feature evaluation to
ensure errata flags are present during feature evaluation.
Fixes: ed478b3f9e ("arm64: capabilities: Group handling of
features and errata workarounds")
CC: Suzuki K Poulose <suzuki.poulose@arm.com>
CC: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add the SPDIF playback codec to the axg s400 board
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the es7154 digital to analog converter which supplies the
lienout jack of the s400
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the es7241 analog to digital converter which is fed by the
lienin jack of the s400
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the devices reponsible for managing the i2s/tdm clocks and pads
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the tdm devices responsible for serializing audio samples
for i2s/tdm interfaces
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the tdm devices responsible for decoding the data provided
through audio serial interface.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the SPDIF output device of the axg audio subsystem
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This commit adds led support for the Firefly-RK3399. The board has two
leds, this commit enables them.
Signed-off-by: Shohei Maruyama <cheat.sc.linux@outlook.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Commit 0fbc47d9e4 ("phy: rockchip-typec: deprecate some DT properties
for various register fields.") deprecates some Rockchip Type-C
properties. As these are now not needed, remove from the device tree
file.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit adds power button support for the Firefly-RK3399.
Signed-off-by: Shohei Maruyama <cheat.sc.linux@outlook.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the audio memory arbiter which control the access of the audio
fifos to the DDR.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The usb power regulator is supplied by the vcc 5v regulator and
controlled by a GPIO. This will be needed to enable usb.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This regulator is controlled by a GPIO and supplies various devices
on the board, such as the lineout codec, the usb supply or the lcd
controller.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the parent supply of the s400 power supplies.
Also add 'regulator-always-on' property on the regulators which can't
be disabled
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Kconfig reports a warning on x86 builds after the ARM64 dependency
was added.
drivers/acpi/Kconfig:6:error: recursive dependency detected!
drivers/acpi/Kconfig:6: symbol ACPI depends on EFI
This rephrases the dependency to keep the ARM64 details out of the
shared Kconfig file, so Kconfig no longer gets confused by it.
For consistency, all three architectures that support ACPI now
select ARCH_SUPPORTS_ACPI in exactly the configuration in which
they allow it. We still need the 'default x86', as each one
wants a different default: default-y on x86, default-n on arm64,
and always-y on ia64.
Fixes: 5bcd44083a ("drivers: acpi: add dependency of EFI for arm64")
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This is a fix against the issue that crash dump kernel may hang up
during booting, which can happen on any ACPI-based system with "ACPI
Reclaim Memory."
(kernel messages after panic kicked off kdump)
(snip...)
Bye!
(snip...)
ACPI: Core revision 20170728
pud=000000002e7d0003, *pmd=000000002e7c0003, *pte=00e8000039710707
Internal error: Oops: 96000021 [#1] SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.0-rc6 #1
task: ffff000008d05180 task.stack: ffff000008cc0000
PC is at acpi_ns_lookup+0x25c/0x3c0
LR is at acpi_ds_load1_begin_op+0xa4/0x294
(snip...)
Process swapper/0 (pid: 0, stack limit = 0xffff000008cc0000)
Call trace:
(snip...)
[<ffff0000084a6764>] acpi_ns_lookup+0x25c/0x3c0
[<ffff00000849b4f8>] acpi_ds_load1_begin_op+0xa4/0x294
[<ffff0000084ad4ac>] acpi_ps_build_named_op+0xc4/0x198
[<ffff0000084ad6cc>] acpi_ps_create_op+0x14c/0x270
[<ffff0000084acfa8>] acpi_ps_parse_loop+0x188/0x5c8
[<ffff0000084ae048>] acpi_ps_parse_aml+0xb0/0x2b8
[<ffff0000084a8e10>] acpi_ns_one_complete_parse+0x144/0x184
[<ffff0000084a8e98>] acpi_ns_parse_table+0x48/0x68
[<ffff0000084a82cc>] acpi_ns_load_table+0x4c/0xdc
[<ffff0000084b32f8>] acpi_tb_load_namespace+0xe4/0x264
[<ffff000008baf9b4>] acpi_load_tables+0x48/0xc0
[<ffff000008badc20>] acpi_early_init+0x9c/0xd0
[<ffff000008b70d50>] start_kernel+0x3b4/0x43c
Code: b9008fb9 2a000318 36380054 32190318 (b94002c0)
---[ end trace c46ed37f9651c58e ]---
Kernel panic - not syncing: Fatal exception
Rebooting in 10 seconds..
(diagnosis)
* This fault is a data abort, alignment fault (ESR=0x96000021)
during reading out ACPI table.
* Initial ACPI tables are normally stored in system ram and marked as
"ACPI Reclaim memory" by the firmware.
* After the commit f56ab9a5b7 ("efi/arm: Don't mark ACPI reclaim
memory as MEMBLOCK_NOMAP"), those regions are differently handled
as they are "memblock-reserved", without NOMAP bit.
* So they are now excluded from device tree's "usable-memory-range"
which kexec-tools determines based on a current view of /proc/iomem.
* When crash dump kernel boots up, it tries to accesses ACPI tables by
mapping them with ioremap(), not ioremap_cache(), in acpi_os_ioremap()
since they are no longer part of mapped system ram.
* Given that ACPI accessor/helper functions are compiled in without
unaligned access support (ACPI_MISALIGNMENT_NOT_SUPPORTED),
any unaligned access to ACPI tables can cause a fatal panic.
With this patch, acpi_os_ioremap() always honors memory attribute
information provided by the firmware (EFI) and retaining cacheability
allows the kernel safe access to ACPI tables.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by and Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
There has been some confusion around what is necessary to prevent kexec
overwriting important memory regions. memblock: reserve, or nomap?
Only memblock nomap regions are reported via /proc/iomem, kexec's
user-space doesn't know about memblock_reserve()d regions.
Until commit f56ab9a5b7 ("efi/arm: Don't mark ACPI reclaim memory
as MEMBLOCK_NOMAP") the ACPI tables were nomap, now they are reserved
and thus possible for kexec to overwrite with the new kernel or initrd.
But this was always broken, as the UEFI memory map is also reserved
and not marked as nomap.
Exporting both nomap and reserved memblock types is a nuisance as
they live in different memblock structures which we can't walk at
the same time.
Take a second walk over memblock.reserved and add new 'reserved'
subnodes for the memblock_reserved() regions that aren't already
described by the existing code. (e.g. Kernel Code)
We use reserve_region_with_split() to find the gaps in existing named
regions. This handles the gap between 'kernel code' and 'kernel data'
which is memblock_reserve()d, but already partially described by
request_standard_resources(). e.g.:
| 80000000-dfffffff : System RAM
| 80080000-80ffffff : Kernel code
| 81000000-8158ffff : reserved
| 81590000-8237efff : Kernel data
| a0000000-dfffffff : Crash kernel
| e00f0000-f949ffff : System RAM
reserve_region_with_split needs kzalloc() which isn't available when
request_standard_resources() is called, use an initcall.
Reported-by: Bhupesh Sharma <bhsharma@redhat.com>
Reported-by: Tyler Baicar <tbaicar@codeaurora.org>
Suggested-by: Akashi Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: James Morse <james.morse@arm.com>
Fixes: d28f6df130 ("arm64/kexec: Add core kexec support")
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
CC: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Not all toolchains have the baremetal elf targets, RedHat/Fedora ones
in particular. So, probe for whether it's available and use the previous
(linux) targets if it isn't.
Reported-by: Laura Abbott <labbott@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
It's possible for userspace to control idx. Sanitize idx when using it
as an array index, to inhibit the potential spectre-v1 write gadget.
Found by smatch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Enable the Rockchip sound driver with MAX98357A/RT5514/DA7219 codecs,
Infineon TPM security chip (compliant with TCG TIS 1.2 TPM specification),
vctrl regulators for dynamic CPU voltages, UVC camera support and SBS-
compliant gas gauges needed for the Samsung Chromebook Plus.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There's one ARM, one x86_32 and one x86_64 version of efi_open_volume()
which can be folded into a single shared version by masking their
differences with the efi_call_proto() macro introduced by commit:
3552fdf29f ("efi: Allow bitness-agnostic protocol calls").
To be able to dereference the device_handle attribute from the
efi_loaded_image_t table in an arch- and bitness-agnostic manner,
introduce the efi_table_attr() macro (which already exists for x86)
to arm and arm64.
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180720014726.24031-7-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This branch adds initial support for new Texas Instruments AM654
quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC
architecture.
Initially only basic devices are configured, support for more devices
will follow later on. And many of the internal devices familiar from
earlier TI SoCs should work with existing kernel device drivers.
-----BEGIN PGP SIGNATURE-----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=pkLC
-----END PGP SIGNATURE-----
Merge tag 'am654-for-v4.19-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
TI AM654 support for v4.19 merge window
This branch adds initial support for new Texas Instruments AM654
quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC
architecture.
Initially only basic devices are configured, support for more devices
will follow later on. And many of the internal devices familiar from
earlier TI SoCs should work with existing kernel device drivers.
* tag 'am654-for-v4.19-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm64: dts: ti: Add support for AM654 EVM base board
soc: ti: Add Support for AM654 SoC config option
arm64: dts: ti: Add Support for AM654 SoC
arm64: Add support for TI's K3 Multicore SoC architecture
dt-bindings: arm: ti: Add bindings for AM654 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable BD9571MWV regulator in ARM64 defconfig
This is to allow wider testing of the BD9571 PMIC which is
present on boards with Renesas R-Car Gen3 SoCs
-----BEGIN PGP SIGNATURE-----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=BkCA
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM64 Based SoC Defconfig Updates for v4.19
* Enable BD9571MWV regulator in ARM64 defconfig
This is to allow wider testing of the BD9571 PMIC which is
present on boards with Renesas R-Car Gen3 SoCs
* tag 'renesas-arm64-defconfig-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: Enable BD9571MWV regulator
Signed-off-by: Olof Johansson <olof@lixom.net>
- Update device tree sources to use SPDX identifiers for license.
- Add cooling device property '#cooling-cells' for all CPUs of
a cluster.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbUpInAAoJEFBXWFqHsHzOVXAH/Rp2MvE/TQckMeB1HVUczu30
Lp3Q/SkdE8TRBdYmXscfMZtvzftZK127c+1NLb6Reo6HVvuGAnVIJgbkexj5Zq3N
BaPwsVO5GzVZn5IL6cWAyWerNpq/bQKRLkj/AkMtVDha1sAUK0Mudxjc1YJU1r7n
ZaIVxMNaaHK0gCVmK3PgQs8d/tHiszp2rWWuyoRFMMUlQFqHr5VseK8QLzk5dfUa
Ieva2igKpoL4TIyFfbVhUD9J9FJrve9W1TQZpreOZBgZmkSEGqj5vAmEVqDD4O4y
CwNKgemjQ9mfBCHH29lMl1xh1sPMSORVBVbzS5XUvVXypViOMNghGpL/I2OIk5o=
=2P5W
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Freescale arm64 device tree update for 4.19:
- Update device tree sources to use SPDX identifiers for license.
- Add cooling device property '#cooling-cells' for all CPUs of
a cluster.
* tag 'imx-dt64-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: Add missing cooling device properties for CPUs
arm64: dts: freescale: Update to use SPDX identifiers
Signed-off-by: Olof Johansson <olof@lixom.net>
Corrections:
* Remove non-existing STBE region from Ether-AVB node in DT of
R-Car E3 (r8a77990) SoC
This region does not exist on this SoC
Cleanups:
* Consistently use rwdt as label for Renesas Watchdog Timer devices
* Add second port to rcar_sound placeholder in DT of R-Car M3-N (r8a77965) SoC
Nodes with #address-cells/#size-cells should have more than one child node
* Fix adv7482 decimal unit addresses in DT of Salvator-X and -XS boards
Addresses are assumed to be hex by dtc, thus it is not valid to use
decimal
Enhancements:
* Describe in DT:
- INTC-EX of R-Car V3H (r8a77980) SoC
- USB3.0 of R-Car E3 (r8a77980) SoC
- All SCIF and HSCIF devices of R-Car D3 (r8a77995) SoC.
Previously only SCIF2, used as the debug consile, was described.
- All IPMMU devicesof R-Car M3-N (r8a77965), V3H (r8a77980) and
E3 (r8a77990) SoCs
* Enable USB3.0 in DT of R-Car E3 (r8a77980) based Ebisu board
* Prefer HSCIF1 over SCIF1 in DT of Salvator-X and -XS boards
HSCIF is superior to SCIF (larger FIFOs, more accurate and wider
supported range of bitrates).
-----BEGIN PGP SIGNATURE-----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=yZLk
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM64 Based SoC DT Updates for v4.19
Corrections:
* Remove non-existing STBE region from Ether-AVB node in DT of
R-Car E3 (r8a77990) SoC
Cleanups:
* Consistently use rwdt as label for Renesas Watchdog Timer devices
* Add second port to rcar_sound placeholder in DT of R-Car M3-N (r8a77965) SoC
* Fix adv7482 decimal unit addresses in DT of Salvator-X and -XS boards
Enhancements:
* Describe in DT:
- INTC-EX of R-Car V3H (r8a77980) SoC
- USB3.0 of R-Car E3 (r8a77980) SoC
- All SCIF and HSCIF devices of R-Car D3 (r8a77995) SoC.
Previously only SCIF2, used as the debug consile, was described.
- All IPMMU devicesof R-Car M3-N (r8a77965), V3H (r8a77980) and
E3 (r8a77990) SoCs
* Enable USB3.0 in DT of R-Car E3 (r8a77980) based Ebisu board
* Prefer HSCIF1 over SCIF1 in DT of Salvator-X and -XS boards
* tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a77980: add INTC-EX support
arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board
arm64: dts: renesas: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes
arm64: dts: renesas: Unify the labels for RWDT
arm64: dts: renesas: salvator-common: Prefer HSCIF1 over SCIF1
arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder
arm64: dts: renesas: salvator-common: Fix adv7482 decimal unit addresses
arm64: dts: renesas: r8a77990: Remove non-existing STBE region
Signed-off-by: Olof Johansson <olof@lixom.net>
- Tidy up MMC properties for hi3660
- Remove keep-power-in-suspend on hikey and hikey960 to
avoid keeping wifi power during suspend and let the
user enable it if required
- Update idle states for hikey960
- Add missing cooling device properties for cpus on hi6220
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=070t
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-4.19v2' of git://github.com/hisilicon/linux-hisi into next/dt
ARM64: DT: Hisilicon SoC DT updates for 4.19v2
- Tidy up MMC properties for hi3660
- Remove keep-power-in-suspend on hikey and hikey960 to
avoid keeping wifi power during suspend and let the
user enable it if required
- Update idle states for hikey960
- Add missing cooling device properties for cpus on hi6220
* tag 'hisi-arm64-dt-for-4.19v2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: Add missing cooling device properties for CPUs
arm64: hikey960: update idle-states
arm64: dts: hikey: Remove keep-power-in-suspend property
arm64: dts: hikey960: Remove keep-power-in-suspend property
arm64: dts: hikey960: Clean up MMC properties and move to proper file
arm64: dts: hikey960: Remove deprecated MMC properties
Signed-off-by: Olof Johansson <olof@lixom.net>
Current LED trigger, 'bt', is not known/used by any existing driver.
Fix this by renaming it to 'bluetooth-power' trigger which is
controlled by the Bluetooth subsystem.
Fixes: 9943230c88 ("arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
In commit 8e4947ee477d ("arm64: dts: qcom: sdm845: Add I2C, SPI, and
UART9 nodes") I accidentally forgot to add the line:
status = "disabled";
to qupv3_id_0 to match qupv3_id_1. Add it now. NOTE: right now the
only sdm845 board with a device tree in mainline is MTP and that board
currently doesn't have any peripherals under qupv3_id_0. If any board
was currently using peripherals under qupv3_id_0 then that board would
need to add this snippet to their board dts file:
&qupv3_id_0 {
status = "okay";
};
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Drop legacy suffix for clocks used by MSM DRM driver.
The _clk suffix has been deprecated since commit 20c3bb80235 ("drm/msm:
drop _clk suffix from clk names").
Fixes: 720c3bb802 (drm/msm: drop _clk suffix from clk names)
The following warnings during boot have been seen since the referenced
fixes commit:
msm_dsi_phy 1a98300.dsi-phy: Using legacy clk name binding. Use "iface" instead of "iface_clk"
msm 1a00000.mdss: Using legacy clk name binding. Use "iface" instead of "iface_clk"
msm 1a00000.mdss: Using legacy clk name binding. Use "bus" instead of "bus_clk"
msm 1a00000.mdss: Using legacy clk name binding. Use "vsync" instead of "vsync_clk"
msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "bus" instead of "bus_clk"
msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "iface" instead of "iface_clk"
msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "core" instead of "core_clk"
msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "vsync" instead of "vsync_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "mdp_core" instead of "mdp_core_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "iface" instead of "iface_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "bus" instead of "bus_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "byte" instead of "byte_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "pixel" instead of "pixel_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "core" instead of "core_clk"
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
QCOM IPQ8074 boards contain NAND flash memory for which
this config needs to be enabled.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add gpio-line-names property for Dragonboard820c based on APQ8096 SoC.
There are 4 gpio-controllers present on this board, including the
APQ8096 SoC, PM8994 (GPIO and MPP) and PMI8994 (GPIO).
Lines names are derived from 96Boards CE Specification 1.0, Appendix
"Expansion Connector Signal Description". Line names for PMI8994 MPP
pins are not added due to the absence of the gpio-controller support.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This adds the rpmh-clk node to sdm845 based on the examples in the
bindings.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This adds the rpmh-rsc node to sdm845 based on the examples in the
bindings.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The debug UART is very useful to have. I2C10 is enabled as an example
of a I2C port we can talk on for now. Eventually we'll want to put
peripherals under it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This adds nodes to SDM845-dtsi for all the I2C ports, all the SPI
ports, and UART9. Note that I2C / SPI / UART are a bit strange on
sdm845 because each "serial engine" has 4 pins associated with it and
depending on which firmware has been loaded into the serial engine
(loaded by the BIOS) the serial engine can behave like an I2C port, a
SPI port, or a UART. As per the landed bindings that means that we
need to create one node for each possible mode that the port could be
in. With 16 serial engines that means 16 x 3 = 48 nodes.
We get away with only creating 33 nodes for now because it seems very
likely that SDM845-based boards will actually all use the same UART
(UART 9) for debug purposes. While another UART could be used for
something like Bluetooth communication we can cross that path when we
come to it. Some documentation that I saw implied that using a UART
for "high speed" communications actually needs yet another different
serial engine firmware anyway.
Note that quick measurements adding all these nodes adds <10k of extra
space per dtb that they're included with. If this becomes a problem
we may need to think of a different way to structure this so that
boards only get the nodes they need (or figure out how to get dtc to
strip 'disabled' nodes). For now it seems OK.
These nodes were programmatically generated with a fairly dumb python
script. See http://crosreview.com/1091631 for the source.
NOTE: at the moment SPI chip select doesn't appear to work in my tests
with the latest posted SPI driver. All testing of SPI with this patch
has been done by hacking SPI to GPIO chip select.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add basic support for the pm8005 and pm8998 PMICs. For now just support
the GPIO controllers.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The get/set events helpers to do some work to check reserved
and padding fields are zero. This is useful on 32bit too.
Move this code into virt/kvm/arm/arm.c, and give the arch
code some underscores.
This is temporarily hidden behind __KVM_HAVE_VCPU_EVENTS until
32bit is wired up.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
For the arm64 RAS Extension, user space can inject a virtual-SError
with specified ESR. So user space needs to know whether KVM support
to inject such SError, this interface adds this query for this capability.
KVM will check whether system support RAS Extension, if supported, KVM
returns true to user space, otherwise returns false.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
[expanded documentation wording]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
For the migrating VMs, user space may need to know the exception
state. For example, in the machine A, KVM make an SError pending,
when migrate to B, KVM also needs to pend an SError.
This new IOCTL exports user-invisible states related to SError.
Together with appropriate user space changes, user space can get/set
the SError exception state to do migrate/snapshot/suspend.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
[expanded documentation wording]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When running on a non-VHE system, we initialize tpidr_el2 to
contain the per-CPU offset required to reach per-cpu variables.
Actually, we initialize it twice: the first time as part of the
EL2 initialization, by copying tpidr_el1 into its el2 counterpart,
and another time by calling into __kvm_set_tpidr_el2.
It turns out that the first part is wrong, as it includes the
distance between the kernel mapping and the linear mapping, while
EL2 only cares about the linear mapping. This was the last vestige
of the first per-cpu use of tpidr_el2 that came in with SDEI.
The only caller then was hyp_panic(), and its now using the
pc-relative get_host_ctxt() stuff, instead of kimage addresses
from the literal pool.
It is not a big deal, as we override it straight away, but it is
slightly confusing. In order to clear said confusion, let's
set this directly as part of the hyp-init code, and drop the
ad-hoc HYP helper.
Reviewed-by: James Morse <james.morse@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add the CPU PMU on sdm845 to get perf support for hardware events.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The Tanix TX3 Mini is a TV box based on the Amlogic S905W chipset.
There are two variants:
- 1 GiB or 2 GiB of DDR3 memory
- 8 GB or 16 GB eMMC flash
Both variants come with:
- 802.11 b/g/n wifi (Silicon Valley Microelectronics SSV6051, does not
support Bluetooth)
- an LED 7 segment display with an FD628 controller
- HDMI and AV (CVBS) output
- 2x USB (utilizing both USB ports provided by the SoC)
- micro SD card slot
- serial console (uart_AO) has to be soldered after opening the case
The board seems to be very similar to the P23x and Q20x reference
boards, which is why it includes meson-gx-p23x-q20x.dtsi:
- eMMC reset routed to BOOT_9
- the SDIO wifi chip's reset line is routed to GPIOX_6 and the reference
clock is 32.768KHz on PWM_E
- SD card detection is routed to CARD_6
- vqmmc of all MMC controllers is hard-wired to 1.8V (VDDIO_BOOT)
- uart_AO can be accessed after opening the case and soldering RX, TX
and GND lines onto the exposed solder points (marked with RX, TX and
GND)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
S905W is a new SoC from the GXL series. It is a cost-reduced version of
the S905X.
The P281 development board from Amlogic uses the same layout as the P231
(S905D development board). Thus the new P281 board inherits
meson-gx-p23x-q20x.dtsi to avoid code-duplication.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the audio clock controller which is part of the audio bus
This controller takes 8 input plls, and the usual clock gate, from the
main clock controller. It provides the clocs for the all the devices of
the audio subsystem, such as tdms, spdif, pdm, etc.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add initial device tree support for Mediatek X20 Development Board
based on MT6797 Deca core SoC. This board is one of the 96Boards
Consumer Edition platform.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Spdif out in not multiplexed on gpio A7 (spdif in is)
Remove this entry to fix the problem.
Fixes: 53c03b0aff36 ("ARM64: dts: meson-axg: add spdif output pins")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Regulator should not be defined inside the SoC dtsi file.
vddio_ao18 is already defined in the S400 board dts anyway.
Fixes: bb8a2ebd0498 ("ARM64: dts: meson-axg: add saradc support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the DT info for SAR ADC of the Amlogic's Meson-AXG SoC.
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The Amlogic P241 board is the Reference Design board for the S805X
variant of the Amlogic Meson GXL SoC family.
The P241 board has the following features :
- 1GiB DDR4 Memory
- HDMI Connector with CEC
- A/V jack with Stereo Audio and CVBS
- 10/100 Ethernet
- 2x USB2.0 Type-A
- On-board WiFi SDIO Module
- On-board eMMC storage
- Infraread Received
- Factory Reset button
- UART connector
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[khilman: s/arm64/ARM64/ in Subject]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the different pin configurations for the spdif output
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the first of the two tas5707 power amplifier present on the
speaker daughter board.
According to the schematics of the S400 v3, only I2SB_DIN3 and
I2SC_DOUT2 will be available to the speaker board.
9R83, 9R84 and 9R18 are not connected so no audio signal will be
provided to the second amplifier. There is no point in enabling it
even if it is visible on the i2c bus.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add a fixed regulator for the main 12v which is the main power supply
of the board.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The microphone card connected to the s400 has 6 leds controlled
through an additional i2c gpio controller.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The Amlogic Meson GXBB based Nanopi-K2 board has an HDMI connector
with CEC and CVBS available on the 40pin header.
This patch adds the nodes to enable HDMI, CEC and CVBS functionnalities.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
meson-gx-p23x-q20x.dtsi is currently used by five boards:
- Amlogic P230 and P231 (which should be identical, apart from the
external RGMII PHY on P230 whereas P231 can only use the internal PHY)
- Amlogic Q200 (identical to P230 but with an S912 GXM SoC instead of a
GXL S905D SoC) and Q201 (identical to P231 but with an S912 GXM SoC
instead of a GXL S905D SoC)
- NEXBOX A1 (based on the S912 GXM SoC)
The Amlogic P230 board uses a Broadcom BCM4356 SDIO wifi chip. Since the
other Amlogic reference design boards are very similar it's safe to
assume that these also use a Broadcom based SDIO wifi chip (which is
also how it was configured in meson-gx-p23x-q20x.dtsi).
However, NEXBOX A1 comes with a "longsys LTM8830" SDIO wifi module,
which is based on the "Qualcomm Atheros QCA9377-3(QCA1023-0)" chipset.
Thus move the wifi node from meson-gx-p23x-q20x.dtsi to each of the
four Amlogic reference board's .dts files.
There are no devicetree bindings for the QCA9377 SDIO wifi module yet,
so nothing is added to meson-gxm-nexbox-a1.dts.
Fixes: f51b454549 ("ARM64: dts: meson-gxm: Add support for the Nexbox A1")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
meson-gxl-s905d-p230.dts and meson-gxm-q200.dts enable the saradc node
(and configure it's vref-supply "VDDIO_AO18") in their corresponding
.dts file.
Move both (the saradc node as well as the VDDIO_AO18 regulator) to
remove some duplicate code.
As a positive side-effect this enables the saradc also for the P231 (GXL
S905D) and Q201 (GXM S912) development boards which are similar to the
P230/Q200 boards (P231 and Q201 use the internal 100Mbit/s PHY, while
P230 and Q200 have an external RGMII PHY).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Describe the INTC-EX interrupt controller in the R8A77980 device tree.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds and USB3.0 host device node and enable it for
R-Car E3 Ebisu board.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds the device nodes for SCIF {0,1,3,4,5} and all HSCIF serial
ports, incl. clocks, power domain and DMAs.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
arm64: dts: add ufs node for Hisilicon.
Signed-off-by: Li Wei <liwei213@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The Pine H64 board have a MicroSD slot connected to MMC0 controller of
the H6 SoC and a eMMC slot connected to MMC2.
Enable them in the device tree.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The Allwinner H6 SoC have 3 MMC controllers.
Add device tree nodes for them.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
address-cells/size-cells is unnecessary for dwmac-sun8i node.
It was in early days, but since a mdio node is used, it could be
removed.
This patch fix the following DT warning:
Warning (avoid_unnecessary_addr_size): /soc/ethernet@1c50000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Avnet Ultra96 rev1 board is commercialized Xilinx zcu100 revC/D
internal board. The patch is reusing zcu100 revC files but changing
model description and compatible strings which are used for example by
libmraa.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
dts reports incorrect usage of these properties in gpio-keys node.
Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary
The patch is removing these useless properties.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Mainline started to use serdev interface for uart attached devices.
Change description to reflect it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This patch adds GPIO for headphone detection on LD11 global board.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This patch adds GPIO for headphone detection on LD20 global board.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The EValuation Module(EVM) platform for AM654 consists of a
common Base board + one or more of daughter cards, which include:
a) "Personality Modules", which can be specific to a profile, such as
ICSSG enabled or Multi-media (including audio).
b) SERDES modules, which may be 2 lane PCIe or two port PCIe + USB2
c) Camera daughter card
d) various display panels
Among other options. There are two basic configurations defined which
include an "EVM" configuration and "IDK" (Industrial development kit)
which differ in the specific combination of daughter cards that are
used.
To simplify support, we choose to support just the base board as the
core device tree file and all daughter cards would be expected to be
device tree overlays.
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The AM654 SoC is a lead device of the K3 Multicore SoC architecture
platform, targeted for broad market and industrial control with aim to
meet the complex processing needs of modern embedded products.
Some highlights of this SoC are:
* Quad ARMv8 A53 cores split over two clusters
* GICv3 compliant GIC500
* Configurable L3 Cache and IO-coherent architecture
* Dual lock-step capable R5F uC for safety-critical applications
* High data throughput capable distributed DMA architecture under NAVSS
* Three Gigabit Industrial Communication Subsystems (ICSSG), each with dual
PRUs and dual RTUs
* Hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
* Centralized System Controller for Security, Power, and Resource
management.
* Dual ADCSS, eQEP/eCAP, eHRPWM, dual CAN-FD
* Flash subsystem with OSPI and Hyperbus interfaces
* Multimedia capability with CAL, DSS7-UL, SGX544, McASP
* Peripheral connectivity including USB3, PCIE, MMC/SD, GPMC, I2C, SPI,
GPIO
See AM65x Technical Reference Manual (SPRUID7, April 2018)
for further details: http://www.ti.com/lit/pdf/spruid7
NOTE:
1. AM654 is the first of the device variants, hence we introduce a
generic am65.dtsi.
2. We indicate the proper bus topology, the ranges are elaborated in
each bus segment instead of using the top level ranges to make sure
that peripherals in each segment use the address space accurately.
3. Peripherals in each bus segment is maintained in a separate dtsi
allowing for reuse in different bus segment representation from a
different core such as R5. This is also the reason for maintaining a
1-1 address map in the ranges.
4. Cache descriptions follow the ARM64 standard description.
Further tweaks may be necessary as we introduce more complex devices,
but can be introduced in context of the device introduction.
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The vDSO needs to have a unique build id in a similar manner
to the kernel and modules. Use the build salt macro.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Do minor rearrangement as well to keep ordering consistent.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Update entry/exit latency and residency time of hikey960 to use more
realistic figures based on unitary tests done on the platform.
The complete results (in us) :
big cluster
cluster CPU
max entry latency 800 400
max exit latency 2900 550
residency 903Mhz 5000 1500
residency 2363Mhz 0 1500
little cluster
cluster CPU
max entry latency 500 400
max exit latency 1600 650
residency 533Mhz 8000 4500
residency 1844Mhz 0 1500
We can see that the residency time depends of the running OPP which is not
handled for now. Then we also have to take into account the constraint of
a residency time shorter than the tick to get full advantage of idle loop
reordering(tick is stopped if idle duration is higher than tick period).
Finally the selected residency value are :
big cluster
cluster CPU
residency 3700 1500
little cluster
cluster CPU
residency 3500 1500
A simple test with a task waking up every 11.111ms shows improvement:
- 5% a lowest OPP
- 22% at highest OPP
The period has been chosen:
- to be shorter than old cluster residency time and longer than new
residency time of cluster off C-state
- to prevent any sync with tick (4ms) when running tests that can add
some variances between tests
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Remove the keep-power-in-suspend property because it keeps wifi power
on during suspend. This property is only required when enabling WoWLAN
and should only be enabled based on need.
Signed-off-by: Ryan Grachek <ryan@edited.us>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Remove the keep-power-in-suspend property because it keeps wifi power
on during suspend. This property is only required when enabling WoWLAN
and should only be enabled based on need. Also remove dupplicate property
Signed-off-by: Ryan Grachek <ryan@edited.us>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Certain properties should be moved to the board file to reflect
the specific properties of the board, and not the SoC. Move these
properties to proper location and organize properties in both files.
Signed-off-by: Ryan Grachek <ryan@edited.us>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The input clock of UART0 should be CLK_PERI_UART0_PD.
Fixes: 13f36c326c ("arm64: dts: mt7622: turn uart0 clock to real ones")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Pine H64 board has an AXP805 PMIC on it, wired up in standalone, or
self-working, mode.
Enable it in the device tree.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Now that the device tree binding headers for the R_CCU have been merged,
we can use the macros, instead of raw numbers.
Switch to R_CCU macros for clock and reset indices.
Reviewed-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The pwm-regulator for vdd_log uses additional unreviewed properties in the
vendor kernel, which slipped in with the devicetree.
As written, they are unreviewed and unused in all mainline implementations
so drop them again.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The vcc3v3_pcie regulator supplies 3.3V so add voltage properties
for it.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
[split off from original patch]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The board exposes two types A ports, one is USB 3.0, up to 5.0Gbps and
another one is USB 2.0 up to 480Mbps. Enable the USB PHYs and the USB
controllers to enable theses devices.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add earlycon to mt7622-rfb1 as to know what was going on when a certain
fault is happening at the early initialization stage.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Using gpio-ranges property represent which GPIOs correspond to which pins
on MT7622 pin controllers. For details, we can see section 2.1 of
Documentation/devicetree/bindings/gpio/gpio.txt to know how to bind pinctrl
and gpio drivers via the "gpio-ranges" property.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add IPMMU device nodes for the R-Car M3-N (r8a77965),
V3H (r8a77980) and E3 (r8a77990) SoCs.
* The r8a77965 IPMMU is quite similar to r8a7796 however VP0
has been added and PV1 has been removed. Also the IMSSTR
bit assignment has been reworked.
* The r8a77980 IPMMU is quite similar to r8a77970 however VC0
has been added. The IMSSTR bit assignment has also been
reworked. Power domains are also quite different however the
the documentation is rather unclear about this topic.
Until we know better VC0 gets assigned to R8A77980_PD_ALWAYS_ON.
* The r8a77990 IPMMU is similar to r8a77995. Power domains are
however different and the public documentation is still unclear.
Based on preliminary information from the hardware team the R-Car E3
SoC comes with an IPMMU-VP0 device in an Always-on power domain and
the IPMMU-VC0 is placed as expected in the A3VC power domain.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Armada 3700
- Add default memory reservation for ATF
- Add a node for AVS support
Fix eth3 connector name on the Macchiatobin
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCW0hwpQAKCRALBhiOFHI7
1WtcAKCGbi1l3gHxOT0WdMtx3vjxIlySYgCgknnIsyIO3uDuujsEOH9nGhzyDAo=
=KfNs
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.19-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt64 for 4.19 (part 1)
Armada 3700
- Add default memory reservation for ATF
- Add a node for AVS support
Fix eth3 connector name on the Macchiatobin
* tag 'mvebu-dt64-4.19-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: armada-37xx: reserve memory for ATF
arm64: dts: marvell: armada-37xx: add the node allowing AVS support
arm64: dts: marvell: mcbin: fix eth3 connector name
Signed-off-by: Olof Johansson <olof@lixom.net>
Cleanup from old properties and code-style warnings.
-----BEGIN PGP SIGNATURE-----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=Wb+u
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Samsung DTS ARM64 changes for v4.19
Cleanup from old properties and code-style warnings.
* tag 'samsung-dt64-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Remove leading 0x from unit addresses in Exynos5433
arm64: dts: exynos: Remove no longer needed samsung thermal properties
Signed-off-by: Olof Johansson <olof@lixom.net>
These changes enable the GPIO controllers on Tegra194 SoCs, which in
turn allows the SD card detection and ethernet controllers to be enabled
as well. The Tegra194 device tree is also extended with the list of CPUs
and a PSCI node to inform the kernel about the presence of PSCI capable
firmware.
-----BEGIN PGP SIGNATURE-----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=DE66
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
arm64: tegra: Device tree changes for v4.19-rc1
These changes enable the GPIO controllers on Tegra194 SoCs, which in
turn allows the SD card detection and ethernet controllers to be enabled
as well. The Tegra194 device tree is also extended with the list of CPUs
and a PSCI node to inform the kernel about the presence of PSCI capable
firmware.
* tag 'tegra-for-4.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add CPU nodes to Tegra194 device tree
arm64: tegra: Add ethernet controller on Tegra194
arm64: tegra: Enable card detect for SD card on P2888
arm64: tegra: Add GPIO controller on Tegra194
Signed-off-by: Olof Johansson <olof@lixom.net>
for 4.19, please pull the following:
- Scott does a bunch of updates to the Stingray DTS and DTS include
files to better support the addition of new boards. Scott also adds
the Stingray OTP Device Tree node
- Pramod updates the Stingray clocks such that they match the latest
revision of the ASIC and datasheets
- Ray sets the Stingray initial watchdog timeout to 60 seconds to give
sufficient time for the kernel to boot and then adds PAXC (internal
PCIe) support to the Stingray base DTS files
- Vladimir adds support for the Stingray smart NIC PS225 boards variants
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJbSLiKAAoJEIfQlpxEBwcEDkYQAKXLAq/k5hZa3vRc86Hd0bqS
9tMBuqsL/o5rFP0gXgtjnZ8vOVpFtan8a16pldIlm13sS6bMUePTLF/ek7O+Ug+6
ScbTG/oKeZ9ztWnttSy5o20c2E1U2IN/ZwRSV1QPOOLsw+fDhUrv+sH3uEF2nbqK
DVfQCoI+XhVauPDMVIJtM+4xor1YYPG4LCBvMUr9uqQX12XENd55IjHH8GSiTyvF
+mUXPQtudceCnuZlYJDTnEJv3a9QwT2Jut+IFf25MNjQl/C2OiJZDCBsLJ8Di164
O5KnZ+NlZFjyxtgl5OTYDYw9n7AeitYyF8+fji7d2PqhD2/cRPOVEmpGpTXJva5R
WSzfXmb4kGncAT48QlUfWZxjdLfC9SzZ0FO80rlAa1L5V8wEBYWzbEqder2/bLG3
DuwgfFzVX6Chvdb6U+Mky/DjWBWDv1BkqYJEUpgSf3vmHzVSFxHuNw4vj1p6Dmom
lCzqdP8EuYBEKObrOkBs4/f/Uy7bwC4l8WMLrHXtXJj753LT/YsByS5W0h15A/2e
0q989PpcLoM5umijzi25DDJLLH1ZfjttsAydccDF500fSj+FhH6Q9YkVLClNOmyw
6o4Jxx/ukcEAB85UiQ9kg8v1iylgONhau2eFGMdnsHHYY9jWEsca28pDIMtPB5zS
GvPZn9pS85230UJVbsLO
=wh6F
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.19/devicetree-arm64' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 4.19, please pull the following:
- Scott does a bunch of updates to the Stingray DTS and DTS include
files to better support the addition of new boards. Scott also adds
the Stingray OTP Device Tree node
- Pramod updates the Stingray clocks such that they match the latest
revision of the ASIC and datasheets
- Ray sets the Stingray initial watchdog timeout to 60 seconds to give
sufficient time for the kernel to boot and then adds PAXC (internal
PCIe) support to the Stingray base DTS files
- Vladimir adds support for the Stingray smart NIC PS225 boards variants
* tag 'arm-soc/for-4.19/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: stingray: add bcm958802a802x dts
arm64: dts: stingray: add PAXC support
arm64: dts: set initial SR watchdog timeout to 60 seconds
arm64: dts: Update Stingray clock DT nodes
arm64: dts: stingray: Add OTP device node
arm64: dts: stingray: move common board components to stingray-board-base
Signed-off-by: Olof Johansson <olof@lixom.net>
for 4.19, please pull the following changes:
- Stefan enables the Raspberry Pi voltage sensor driver (HWMON) in the
arm64 defconfig file
- Ray enables the ARM SP805 watchdog driver in the arm64 defconfig file
-----BEGIN PGP SIGNATURE-----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=DLo+
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.19/defconfig-arm64' of https://github.com/Broadcom/stblinux into next/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig changes
for 4.19, please pull the following changes:
- Stefan enables the Raspberry Pi voltage sensor driver (HWMON) in the
arm64 defconfig file
- Ray enables the ARM SP805 watchdog driver in the arm64 defconfig file
* tag 'arm-soc/for-4.19/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG
arm64: defconfig: Enable RPi voltage sensor
Signed-off-by: Olof Johansson <olof@lixom.net>
the Chromebook Flip C101PA which also got some stuff moved around
to make room for Scarlet once its display pipeline makes some more
advances.
Also included are some general sound improvements for rk3399
including enabling hdmi-sound on the sapphire board and some
misc fixes like missing cooling device properties and wrong
clock-names for the uart1 on rk3328.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAltGDh0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgYhLB/9X2ICbvSw51i1N/4nmuik4t8bXG9l68NtG
E9sGvNI0/kJB8pZAodQfQFCih0+kw++mDQoRimVsIIicbc6T02slKtmF8ezRuLRB
sDb+HTwFcJ6c4WtdNynD7YkSqonMEDJ1RZgCRRwXWjmU17kXUuYLC43FXri6EBID
jqv38rehXt+6qNnIBHXAX52h7jKQWK2rocg8k19J+NOyESQBYB4wJ/HOAqf9nsiZ
eh+xSSg1gmQXuBgbbFKoNu328PGGiEbQq/W7TBMHUu8kjWUKinpu+Hqjj3K8daDm
sE6WR+Gv7aQ7J6xRkabtGo/WqiStcduk12yhuKy44mzUYlcZ3HVB
=o2KT
-----END PGP SIGNATURE-----
Merge tag 'v4.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
SPDX conversion for existing devicetree files. New board is Gru-Bob
the Chromebook Flip C101PA which also got some stuff moved around
to make room for Scarlet once its display pipeline makes some more
advances.
Also included are some general sound improvements for rk3399
including enabling hdmi-sound on the sapphire board and some
misc fixes like missing cooling device properties and wrong
clock-names for the uart1 on rk3328.
* tag 'v4.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: corrected uart1 clock-names for rk3328
arm64: dts: rockchip: add Google Bob
arm64: dts: rockchip: move core edp from rk3399-kevin to shared chromebook
arm64: dts: rockchip: move Chromebook-specific Gru-parts to a separate file
arm64: dts: rockchip: add phandles to some nodes on rk3399-gru
arm64: dts: rockchip: add some common pin-settings to rk3399
arm64: dts: rockchip: generalize rk3399 #sound-dai-cells
arm64: dts: rockchip: Add missing cooling device properties for CPUs
arm64: dts: rockchip: enable hdmi sound on rk3399-sapphire
arm64: dts: rockchip: connect hdmi sound in rk3399
arm64: dts: rockchip: use SPDX-License-Identifier
Signed-off-by: Olof Johansson <olof@lixom.net>
Add bcm958802a802x dts to be used on all Stingray smart NIC PS225 board
variants
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add PAXC support to Broadcom Stingray SoC
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
New compatibles are now supported by the Inside Secure SafeXcel driver.
As they are more specific than the old ones, they should be used
whenever possible. This patch updates the Marvell Armada 37xx device
tree accordingly.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
New compatibles are now supported by the Inside Secure SafeXcel driver.
As they are more specific than the old ones, they should be used
whenever possible. This patch updates the Marvell cp110 device tree
accordingly.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
syscall_trace_{enter,exit} are only called from C code, so drop the
asmlinkage qualifier from their definitions.
Signed-off-by: Will Deacon <will.deacon@arm.com>
To minimize the risk of userspace-controlled values being used under
speculation, this patch adds pt_regs based syscall wrappers for arm64,
which pass the minimum set of required userspace values to syscall
implementations. For each syscall, a wrapper which takes a pt_regs
argument is automatically generated, and this extracts the arguments
before calling the "real" syscall implementation.
Each syscall has three functions generated:
* __do_<compat_>sys_<name> is the "real" syscall implementation, with
the expected prototype.
* __se_<compat_>sys_<name> is the sign-extension/narrowing wrapper,
inherited from common code. This takes a series of long parameters,
casting each to the requisite types required by the "real" syscall
implementation in __do_<compat_>sys_<name>.
This wrapper *may* not be necessary on arm64 given the AAPCS rules on
unused register bits, but it seemed safer to keep the wrapper for now.
* __arm64_<compat_>_sys_<name> takes a struct pt_regs pointer, and
extracts *only* the relevant register values, passing these on to the
__se_<compat_>sys_<name> wrapper.
The syscall invocation code is updated to handle the calling convention
required by __arm64_<compat_>_sys_<name>, and passes a single struct
pt_regs pointer.
The compiler can fold the syscall implementation and its wrappers, such
that the overhead of this approach is minimized.
Note that we play games with sys_ni_syscall(). It can't be defined with
SYSCALL_DEFINE0() because we must avoid the possibility of error
injection. Additionally, there are a couple of locations where we need
to call it from C code, and we don't (currently) have a
ksys_ni_syscall(). While it has no wrapper, passing in a redundant
pt_regs pointer is benign per the AAPCS.
When ARCH_HAS_SYSCALL_WRAPPER is selected, no prototype is defines for
sys_ni_syscall(). Since we need to treat it differently for in-kernel
calls and the syscall tables, the prototype is defined as-required.
The wrappers are largely the same as their x86 counterparts, but
simplified as we don't have a variety of compat calling conventions that
require separate stubs. Unlike x86, we have some zero-argument compat
syscalls, and must define COMPAT_SYSCALL_DEFINE0() to ensure that these
are also given an __arm64_compat_sys_ prefix.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In preparation for converting to pt_regs syscall wrappers, convert our
existing compat wrappers to C. This will allow the pt_regs wrappers to
be automatically generated, and will allow for the compat register
manipulation to be folded in with the pt_regs accesses.
To avoid confusion with the upcoming pt_regs wrappers and existing
compat wrappers provided by core code, the C wrappers are renamed to
compat_sys_aarch32_<syscall>.
With the assembly wrappers gone, we can get rid of entry32.S and the
associated boilerplate.
Note that these must call the ksys_* syscall entry points, as the usual
sys_* entry points will be modified to take a single pt_regs pointer
argument.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We don't currently annotate our mmap implementation as a syscall, as we
need to do to use pt_regs syscall wrappers.
Let's mark it as a real syscall.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We don't currently annotate our various sigreturn functions as syscalls,
as we need to do to use pt_regs syscall wrappers.
Let's mark them as real syscalls.
For compat_sys_sigreturn and compat_sys_rt_sigreturn, this changes the
return type from int to long, matching the prototypes in sys32.c.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
With pt_regs syscall wrappers, the calling convention for
sys_personality() will change. Use ksys_personality(), which is
functionally equivalent.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Our syscall tables are aligned to 4096 bytes, which allowed their
addresses to be generated with a single adrp in entry.S. This has the
unfortunate property of wasting space in .rodata for the necessary
padding.
Now that the address is generated by C code, we can rely on the compiler
to do the right thing, and drop the alignemnt.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We can zero GPRs x0 - x29 upon entry from EL0 to make it harder for
userspace to control values consumed by speculative gadgets.
We don't blat x30, since this is stashed much later, and we'll blat it
before invoking C code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that all of the syscall logic works on the saved pt_regs, apply_ssbd
can safely corrupt x0-x3 in the entry paths, and we no longer need to
restore them. So let's remove the logic doing so.
With that logic gone, we can fold the branch target into the macro, so
that callers need not deal with this. GAS provides \@, which provides a
unique value per macro invocation, which we can use to create a unique
label.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that syscalls are invoked with pt_regs, we no longer need to ensure
that the argument regsiters are live in the entry assembly, and it's
fine to not restore them after context_tracking_user_exit() has
corrupted them.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the syscall invocation logic is in C, we can migrate the rest
of the syscall entry logic over, so that the entry assembly needn't look
at the register values at all.
The SVE reset across syscall logic now unconditionally clears TIF_SVE,
but sve_user_disable() will only write back to CPACR_EL1 when SVE is
actually enabled.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently syscall tracing is a tricky assembly state machine, which can
be rather difficult to follow, and even harder to modify. Before we
start fiddling with it for pt_regs syscalls, let's convert it to C.
This is not intended to have any functional change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
As a first step towards invoking syscalls with a pt_regs argument,
convert the raw syscall invocation logic to C. We end up with a bit more
register shuffling, but the unified invocation logic means we can unify
the tracing paths, too.
Previously, assembly had to open-code calls to ni_sys() when the system
call number was out-of-bounds for the relevant syscall table. This case
is now handled by invoke_syscall(), and the assembly no longer need to
handle this case explicitly. This allows the tracing paths to be
simplified and unified, as we no longer need the __ni_sys_trace path and
the __sys_trace_return label.
This only converts the invocation of the syscall. The rest of the
syscall triage and tracing is left in assembly for now, and will be
converted in subsequent patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In preparation for invoking arbitrary syscalls from C code, let's define
a type for an arbitrary syscall, matching the parameter passing rules of
the AAPCS.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The arm64 sigreturn* syscall handlers are non-standard. Rather than
taking a number of user parameters in registers as per the AAPCS,
they expect the pt_regs as their sole argument.
To make this work, we override the syscall definitions to invoke
wrappers written in assembly, which mov the SP into x0, and branch to
their respective C functions.
On other architectures (such as x86), the sigreturn* functions take no
argument and instead use current_pt_regs() to acquire the user
registers. This requires less boilerplate code, and allows for other
features such as interposing C code in this path.
This patch takes the same approach for arm64.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tentatively-reviewed-by: Dave Martin <dave.martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In subsequent patches, we'll want to make use of sve_user_enable() and
sve_user_disable() outside of kernel/fpsimd.c. Let's move these to
<asm/fpsimd.h> where we can make use of them.
To avoid ifdeffery in sequences like:
if (system_supports_sve() && some_condition)
sve_user_disable();
... empty stubs are provided when support for SVE is not enabled. Note
that system_supports_sve() contains as IS_ENABLED(CONFIG_ARM64_SVE), so
the sve_user_disable() call should be optimized away entirely when
CONFIG_ARM64_SVE is not selected.
To ensure that this is the case, the stub definitions contain a
BUILD_BUG(), as we do for other stubs for which calls should always be
optimized away when the relevant config option is not selected.
At the same time, the include list of <asm/fpsimd.h> is sorted while
adding <asm/sysreg.h>.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that we have sysreg_clear_set(), we can use this instead of
change_cpacr().
Note that the order of the set and clear arguments differs between
change_cpacr() and sysreg_clear_set(), so these are flipped as part of
the conversion. Also, sve_user_enable() redundantly clears
CPACR_EL1_ZEN_EL0EN before setting it; this is removed for clarity.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that we have sysreg_clear_set(), we can consistently use this
instead of config_sctlr_el1().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently we assert that the SCTLR_EL{1,2}_{SET,CLEAR} bits are
self-consistent with an assertion in config_sctlr_el1(). This is a bit
unusual, since config_sctlr_el1() doesn't make use of these definitions,
and is far away from the definitions themselves.
We can use the CPP #error directive to have equivalent assertions in
<asm/sysreg.h>, next to the definitions of the set/clear bits, which is
a bit clearer and simpler.
At the same time, lets fill in the upper 32 bits for both registers in
their respective RES0 definitions. This could be a little nicer with
GENMASK_ULL(63, 32), but this currently lives in <linux/bitops.h>, which
cannot safely be included from assembly, as <asm/sysreg.h> can.
Note the when the preprocessor evaluates an expression for an #if
directive, all signed or unsigned values are treated as intmax_t or
uintmax_t respectively. To avoid ambiguity, we define explicitly define
the mask of all 64 bits.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In do_notify_resume, we manipulate thread_flags as a 32-bit unsigned
int, whereas thread_info::flags is a 64-bit unsigned long, and elsewhere
(e.g. in the entry assembly) we manipulate the flags as a 64-bit
quantity.
For consistency, and to avoid problems if we end up with more than 32
flags, let's make do_notify_resume take the flags as a 64-bit unsigned
long.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This reverts commit 7e7df71fd5.
When unwinding out of the IRQ stack and onto the interrupted EL1 stack,
we cannot rely on the frame pointer being strictly increasing, as this
could terminate the backtrace early depending on how the stacks have
been allocated.
Signed-off-by: Will Deacon <will.deacon@arm.com>
The RK3399 Ficus board is an Enterprise Edition board
manufactured by Vamrs Ltd., based on the Rockchip RK3399 SoC.
The board exposes a bunch of nice peripherals, including
SATA, HDMI, MIPI CSI, Ethernet, WiFi, and PCIe.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
It does not matter if the caller of may_use_simd() migrates to
another cpu after the call, but it is still important that the
kernel_neon_busy percpu instance that is read matches the cpu the
task is running on at the time of the read.
This means that raw_cpu_read() is not sufficient. kernel_neon_busy
may appear true if the caller migrates during the execution of
raw_cpu_read() and the next task to be scheduled in on the initial
cpu calls kernel_neon_begin().
This patch replaces raw_cpu_read() with this_cpu_read() to protect
against this race.
Cc: <stable@vger.kernel.org>
Fixes: cb84d11e16 ("arm64: neon: Remove support for nested or hardirq kernel-mode NEON")
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Yandong Zhao <yandong77520@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The labels for RWDT device node were named as 2 types now:
- wdt0: r8a7795, r8a7796, r8a77965.
- rwdt: r8a77970, r8a77990, r8a77995.
To be made consistent, this patch unifis the labels as the hardware
name "rwdt".
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Implement calls to rseq_signal_deliver, rseq_handle_notify_resume
and rseq_syscall so that we can select HAVE_RSEQ on arm64.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Building without NUMA but with FLATMEM results in a link error
because mem_map[] is not available:
aarch64-linux-ld -EB -maarch64elfb --no-undefined -X -pie -shared -Bsymbolic --no-apply-dynamic-relocs --build-id -o .tmp_vmlinux1 -T ./arch/arm64/kernel/vmlinux.lds --whole-archive built-in.a --no-whole-archive --start-group arch/arm64/lib/lib.a lib/lib.a --end-group
init/do_mounts.o: In function `mount_block_root':
do_mounts.c:(.init.text+0x1e8): undefined reference to `mem_map'
arch/arm64/kernel/vdso.o: In function `vdso_init':
vdso.c:(.init.text+0xb4): undefined reference to `mem_map'
This uses the same trick as the other architectures, making flatmem
depend on !NUMA to avoid the broken configuration.
Fixes: e7d4bac428 ("arm64: add ARM64-specific support for flatmem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add support for 64bit event by using chained event counters
and 64bit cycle counters.
PMUv3 allows chaining a pair of adjacent 32-bit counters, effectively
forming a 64-bit counter. The low/even counter is programmed to count
the event of interest, and the high/odd counter is programmed to count
the CHAIN event, taken when the low/even counter overflows.
For CPU cycles, when 64bit mode is requested, the cycle counter
is used in 64bit mode. If the cycle counter is not available,
falls back to chaining.
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The arm64 PMU updates the event counters and reprograms the
counters in the overflow IRQ handler without disabling the
PMU. This could potentially cause skews in for group counters,
where the overflowed counters may potentially loose some event
counts, while they are reprogrammed. To prevent this, disable
the PMU while we process the counter overflows and enable it
right back when we are done.
This patch also moves the PMU stop/start routines to avoid a
forward declaration.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
armv8pmu_select_counter always returns the passed idx. So
let us make that void and get rid of the pointless checks.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The armpmu uses get_event_idx callback to allocate an event
counter for a given event, which marks the selected counter
as "used". Now, when we delete the counter, the arm_pmu goes
ahead and clears the "used" bit and then invokes the "clear_event_idx"
call back, which kind of splits the job between the core code
and the backend. To keep things tidy, mandate the implementation
of clear_event_idx() and add it for exisiting backends.
This will be useful for adding the chained event support, where
we leave the event idx maintenance to the backend.
Also, when an event is removed from the PMU, reset the hw.idx
to indicate that a counter is not allocated for this event,
to help the backends do better checks. This will be also used
for the chain counter support.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Convert the {read/write}_counter APIs to handle 64bit values
to enable supporting chained event counters. The backends still
use 32bit values and we pass them 32bit values only. So in effect
there are no functional changes.
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Each PMU defines their max_period of the counter as the maximum
value that can be counted. Since all the PMU backends support
32bit counters by default, let us remove the redundant field.
No functional changes.
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This reverts commit 38fc424867.
Distributions such as Fedora and Debian do not package the ELF linker
scripts with their toolchains, resulting in kernel build failures such
as:
| CHK include/generated/compile.h
| LD [M] arch/arm64/crypto/sha512-ce.o
| aarch64-linux-gnu-ld: cannot open linker script file ldscripts/aarch64elf.xr: No such file or directory
| make[1]: *** [scripts/Makefile.build:530: arch/arm64/crypto/sha512-ce.o] Error 1
| make: *** [Makefile:1029: arch/arm64/crypto] Error 2
Revert back to the linux targets for now, adding a comment to the Makefile
so we don't accidentally break this in the future.
Cc: Paul Kocialkowski <contact@paulk.fr>
Cc: <stable@vger.kernel.org>
Fixes: 38fc424867 ("arm64: Use aarch64elf and aarch64elfb emulation mode variants")
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Set initial Stingray watchdog timeout to 60 seconds
By the time when the userspace watchdog daemon is ready and taking control
over, the watchdog timeout will then be reset to what's configured in the
daemon.
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Current ACPI ARM64 NUMA initialization code in
acpi_numa_gicc_affinity_init()
carries out NUMA nodes creation and cpu<->node mappings at the same time
in the arch backend so that a single SRAT walk is needed to parse both
pieces of information. This implies that the cpu<->node mappings must
be stashed in an array (sized NR_CPUS) so that SMP code can later use
the stashed values to avoid another SRAT table walk to set-up the early
cpu<->node mappings.
If the kernel is configured with a NR_CPUS value less than the actual
processor entries in the SRAT (and MADT), the logic in
acpi_numa_gicc_affinity_init() is broken in that the cpu<->node mapping
is only carried out (and stashed for future use) only for a number of
SRAT entries up to NR_CPUS, which do not necessarily correspond to the
possible cpus detected at SMP initialization in
acpi_map_gic_cpu_interface() (ie MADT and SRAT processor entries order
is not enforced), which leaves the kernel with broken cpu<->node
mappings.
Furthermore, given the current ACPI NUMA code parsing logic in
acpi_numa_gicc_affinity_init(), PXM domains for CPUs that are not parsed
because they exceed NR_CPUS entries are not mapped to NUMA nodes (ie the
PXM corresponding node is not created in the kernel) leaving the system
with a broken NUMA topology.
Rework the ACPI ARM64 NUMA initialization process so that the NUMA
nodes creation and cpu<->node mappings are decoupled. cpu<->node
mappings are moved to SMP initialization code (where they are needed),
at the cost of an extra SRAT walk so that ACPI NUMA mappings can be
batched before being applied, fixing current parsing pitfalls.
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: John Garry <john.garry@huawei.com>
Fixes: d8b47fca8c ("arm64, ACPI, NUMA: NUMA support based on SRAT and
SLIT")
Link: http://lkml.kernel.org/r/1527768879-88161-2-git-send-email-xiexiuqi@huawei.com
Reported-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Flatmem is useful in reducing kernel memory usage.
One usecase is in kdump kernel. We are able to save
~14M by moving to flatmem scheme.
Cc: xe-kernel@external.cisco.com
Cc: Nikunj Kela <nkela@cisco.com>
Signed-off-by: Nikunj Kela <nkela@cisco.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Trapping blocking WFE is extremely beneficial in situations where
the system is oversubscribed, as it allows another thread to run
while being blocked. In a non-oversubscribed environment, this is
the complete opposite, and trapping WFE is just unnecessary overhead.
Let's only enable WFE trapping if the CPU has more than a single task
to run (that is, more than just the vcpu thread).
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The {pmd,pud,pgd}_populate accessors usage have always been a bit weird
in KVM. We don't have a struct mm to pass (and neither does the kernel
most of the time, but still...), and the 32bit code has all kind of
cache maintenance that doesn't make sense on ARMv7+ when MP extensions
are mandatory (which is the case when the VEs are present).
Let's bite the bullet and provide our own implementations. The only bit
of architectural code left has to do with building the table entry
itself (arm64 having up to 52bit PA, arm lacking PUD level).
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The arm and arm64 KVM page tables accessors are pointlessly different
between the two architectures, and likely both wrong one way or another:
arm64 lacks a dsb(), and arm doesn't use WRITE_ONCE.
Let's unify them.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On systems where CTR_EL0.DIC is set, we don't need to perform
icache invalidation to guarantee that we'll fetch the right
instruction stream.
This also means that taking a permission fault to invalidate the
icache is an unnecessary overhead.
On such systems, we can safely leave the page as being executable.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Set/Way handling is one of the ugliest corners of KVM. We shouldn't
have to handle that, but better safe than sorry.
Thankfully, FWB fixes this for us by not requiering any maintenance
(the guest is forced to use cacheable memory, no matter what it says,
and the whole system is garanteed to be cache coherent), which means
we don't have to emulate S/W CMOs, and don't have to track VM ops either.
We still have to trap S/W though, if only to prevent the guest from
doing something bad.
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Up to ARMv8.3, the combinaison of Stage-1 and Stage-2 attributes
results in the strongest attribute of the two stages. This means
that the hypervisor has to perform quite a lot of cache maintenance
just in case the guest has some non-cacheable mappings around.
ARMv8.4 solves this problem by offering a different mode (FWB) where
Stage-2 has total control over the memory attribute (this is limited
to systems where both I/O and instruction fetches are coherent with
the dcache). This is achieved by having a different set of memory
attributes in the page tables, and a new bit set in HCR_EL2.
On such a system, we can then safely sidestep any form of dcache
management.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Many shash algorithms set .cra_flags = CRYPTO_ALG_TYPE_SHASH. But this
is redundant with the C structure type ('struct shash_alg'), and
crypto_register_shash() already sets the type flag automatically,
clearing any type flag that was already there. Apparently the useless
assignment has just been copy+pasted around.
So, remove the useless assignment from all the shash algorithms.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After Kevin, the second chromebook-incarnation of the Gru series is Bob.
This materializes as the Asus Chromebook Flip C101PA, whose formfactor
is quite similar to Minnie from the Veyron series.
Add the devicetree file and binding update for it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Bob needs the same backlight and core edp settings, so move these nodes to
the shared dtsi that both will use as a base.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Similar to rk3288-Veyron before, the Gru-series does contain Chromebook
(aka clamshell laptops) and non-Chromebook devices. And while the two
Chromebook devices Kevin and Bob are quite similar, Scarlet the tablet-
device is quite different in its design.
Therefore move the Chromebook parts into a gru-chromebook dtsi file
to make sharing easier.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Some nodes will need to be refined on a per board level, so add phandles
to them to reference them later.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
lkdtm calls flush_icache_range(), which results in an out-of-line call
to __flush_icache_range(), which is not exported to modules.
Export the symbol to modules to fix this build breakage.
Fixes: 3b8c9f1cdf ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 37c3ec2d81 ("arm64: topology: divorce MC scheduling domain from
core_siblings") selected the smallest of LLC, socket siblings, and NUMA
node siblings to ensure that the sched domain we build for the MC layer
isn't larger than the DIE above it or it's shrunk to the socket or NUMA
node if LLC exist acrosis NUMA node/chiplets.
Commit acd32e52e4e0 ("arm64: topology: Avoid checking numa mask for
scheduler MC selection") reverted the NUMA siblings checks since the
CPU topology masks weren't updated on hotplug at that time.
This patch re-introduces numa mask check as the CPU and NUMA topology
is now updated in hotplug paths. Effectively, this patch does the
partial revert of commit acd32e52e4e0.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Tested-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Similar to core_sibling and thread_sibling, it's better to align and
rename llc_siblings to llc_sibling.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Tested-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We already repopulate the information on CPU hotplug-in, so we can safely
remove the CPU topology and NUMA cpumap information during CPU hotplug
out operation. This will help to provide the correct cpumask for
scheduler domains.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Tested-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
It's incorrect to iterate over all the possible CPUs to update the
sibling masks when any CPU is hotplugged in. In case the topology
siblings masks of the CPU is removed when is it hotplugged out, we
end up updating those masks when one of it's sibling is powered up
again. This will provide inconsistent view.
Further, since the CPU calling update_sibling_masks is yet to be set
online, there's no need to compare itself with each online CPU when
updating the siblings masks.
This patch restricts updation of sibling masks only for CPUs that are
already online. It also the drops the unnecessary cpuid check.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Tested-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch adds support to remove all the CPU topology information using
clear_cpu_topology and also resetting the sibling information on other
sibling CPUs. This will be used in cpu_disable so that all the topology
sibling information is removed on CPU hotplug out.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Tested-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently numa_clear_node removes both cpu information from the NUMA
node cpumap as well as the NUMA node id from the cpu. Similarly
numa_store_cpu_info updates both percpu nodeid and NUMA cpumap.
However we need to retain the numa node id for the cpu and only remove
the cpu information from the numa node cpumap during CPU hotplug out.
The same can be extended for hotplugging in the CPU.
This patch separates out numa_{add,remove}_cpu from numa_clear_node and
numa_store_cpu_info.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Tested-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently reset_cpu_topology clears all the CPU topology information
and resets to default values. However we may need to just clear the
information when we hotplug out the CPU. In preparation to add the
support the same, let's refactor reset_cpu_topology to just reset
the information and move clearing out the topology information to
clear_cpu_topology.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Tested-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ERRATA_MIDR_REV_RANGE macro assigns ARM64_CPUCAP_LOCAL_CPU_ERRATUM
to the '.type' field of the 'struct arm64_cpu_capabilities', so there's
no need to assign it explicitly as well.
Signed-off-by: Will Deacon <will.deacon@arm.com>
arm64 requires break-before-make. Originally, before
setting up new pmd/pud entry for huge mapping, in few
cases, the modifying pmd/pud entry was still valid
and pointing to next level page table as we only
clear off leaf PTE in unmap leg.
a) This was resulting into stale entry in TLBs (as few
TLBs also cache intermediate mapping for performance
reasons)
b) Also, modifying pmd/pud was the only reference to
next level page table and it was getting lost without
freeing it. So, page leaks were happening.
Implement pud_free_pmd_page() and pmd_free_pte_page() to
enforce BBM and also free the leaking page tables.
Implementation requires,
1) Clearing off the current pud/pmd entry
2) Invalidation of TLB
3) Freeing of the un-used next level page tables
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Chintan Pandya <cpandya@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add an interface to invalidate intermediate page tables
from TLB for kernel.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Chintan Pandya <cpandya@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Pull in core ioremap changes from -tip, since we depend on these for
re-enabling huge I/O mappings on arm64.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Linking the ARM64 defconfig kernel with LLVM lld fails with the error:
ld.lld: error: unknown argument: -p
Makefile:1015: recipe for target 'vmlinux' failed
Without this flag, the ARM64 defconfig kernel successfully links with
lld and boots on Dragonboard 410c.
After digging through binutils source and changelogs, it turns out that
-p is only relevant to ancient binutils installations targeting 32-bit
ARM. binutils accepts -p for AArch64 too, but it's always been
undocumented and silently ignored. A comment in
ld/emultempl/aarch64elf.em explains that it's "Only here for backwards
compatibility".
Since this flag is a no-op on ARM64, we can safely drop it.
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Patching kernel instructions at runtime requires other CPUs to undergo
a context synchronisation event via an explicit ISB or an IPI in order
to ensure that the new instructions are visible. This is required even
for "hotpatch" instructions such as NOP and BL, so avoid optimising in
this case and always go via stop_machine() when performing general
patching.
ftrace isn't quite as strict, so it can continue to call the nosync
code directly.
Signed-off-by: Will Deacon <will.deacon@arm.com>
When invalidating the instruction cache for a kernel mapping via
flush_icache_range(), it is also necessary to flush the pipeline for
other CPUs so that instructions fetched into the pipeline before the
I-cache invalidation are discarded. For example, if module 'foo' is
unloaded and then module 'bar' is loaded into the same area of memory,
a CPU could end up executing instructions from 'foo' when branching into
'bar' if these instructions were fetched into the pipeline before 'foo'
was unloaded.
Whilst this is highly unlikely to occur in practice, particularly as
any exception acts as a context-synchronizing operation, following the
letter of the architecture requires us to execute an ISB on each CPU
in order for the new instruction stream to be visible.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that users have been migrated to PSR_AA32, kill the unused
COMPAT_PSR definitions.
The only difference we need a definition for is COMPAT_PSR_DIT_BIT,
which differs from PSR_AA32_DIT_BIT.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Some code cares about the SPSR_ELx format for exceptions taken from
AArch32 to inspect or manipulate the SPSR_ELx value, which is already in
the SPSR_ELx format, and not in the AArch32 PSR format.
To separate these from cases where we care about the AArch32 PSR format,
migrate these cases to use the PSR_AA32_* definitions rather than
COMPAT_PSR_*.
There should be no functional change as a result of this patch.
Note that arm64 KVM does not support a compat KVM API, and always uses
the SPSR_ELx format, even for AArch32 guests.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Some code cares about the SPSR_ELx format for exceptions taken from
AArch32 to inspect or manipulate the SPSR_ELx value, which is already in
the SPSR_ELx format, and not in the AArch32 PSR format.
To separate these from cases where we care about the AArch32 PSR format,
migrate these cases to use the PSR_AA32_* definitions rather than
COMPAT_PSR_*.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The SPSR_ELx format for exceptions taken from AArch32 is slightly
different to the AArch32 PSR format.
Map between the two in the compat ptrace code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 7206dc93a5 ("arm64: Expose Arm v8.4 features")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The SPSR_ELx format for exceptions taken from AArch32 differs from the
AArch32 PSR format. Thus, we must translate between the two when setting
up a compat sigframe, or restoring context from a compat sigframe.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 7206dc93a5 ("arm64: Expose Arm v8.4 features")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently valid_user_regs() treats SPSR_ELx.DIT as a RES0 bit, causing
it to be zeroed upon exception return, rather than preserved. Thus, code
relying on DIT will not function as expected, and may expose an
unexpected timing sidechannel.
Let's remove DIT from the set of RES0 bits, such that it is preserved.
At the same time, the related comment is updated to better describe the
situation, and to take into account the most recent documentation of
SPSR_ELx, in ARM DDI 0487C.a.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 7206dc93a5 ("arm64: Expose Arm v8.4 features")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The AArch32 CPSR/SPSR format is *almost* identical to the AArch64
SPSR_ELx format for exceptions taken from AArch32, but the two have
diverged with the addition of DIT, and we need to treat the two as
logically distinct.
This patch adds new definitions for the SPSR_ELx format for exceptions
taken from AArch32, with a consistent PSR_AA32_ prefix. The existing
COMPAT_PSR_ definitions will be used for the PSR format as seen from
AArch32.
Definitions of DIT are provided for both, and inline functions are
provided to map between the two formats. Note that for SPSR_ELx, the
(RES0) J bit has been re-allocated as the DIT bit.
Once users of the COMPAT_PSR definitions have been migrated over to the
PSR_AA32 definitions, the (majority of) the former will be removed, so
no efforts is made to avoid duplication until then.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
HSCIF is superior to SCIF (larger FIFOs, more accurate and wider
supported range of bitrates).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Track mismatches in the cache type register (CTR_EL0), other
than the D/I min line sizes and trap user accesses if there are any.
Fixes: be68a8aaf9 ("arm64: cpufeature: Fix CTR_EL0 field definitions")
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
If there is a mismatch in the I/D min line size, we must
always use the system wide safe value both in applications
and in the kernel, while performing cache operations. However,
we have been checking more bits than just the min line sizes,
which triggers false negatives. We may need to trap the user
accesses in such cases, but not necessarily patch the kernel.
This patch fixes the check to do the right thing as advertised.
A new capability will be added to check mismatches in other
fields and ensure we trap the CTR accesses.
Fixes: be68a8aaf9 ("arm64: cpufeature: Fix CTR_EL0 field definitions")
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When running with CONFIG_PREEMPT=n, the spinlock fastpaths fit inside
64 bytes, which typically coincides with the L1 I-cache line size.
Inline the spinlock fastpaths, like we do already for rwlocks.
Signed-off-by: Will Deacon <will.deacon@arm.com>
It's fair to say that our ticket lock has served us well over time, but
it's time to bite the bullet and start using the generic qspinlock code
so we can make use of explicit MCS queuing and potentially better PV
performance in future.
Signed-off-by: Will Deacon <will.deacon@arm.com>
With the recent syntax extension, Kconfig is now able to evaluate the
compiler / toolchain capability.
However, accumulating flags to 'LD' is not compatible with the way
it works; 'LD' must be passed to Kconfig to call $(ld-option,...)
from Kconfig files. If you tweak 'LD' in arch Makefile depending on
CONFIG_CPU_BIG_ENDIAN, this would end up with circular dependency
between Makefile and Kconfig.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The following kernel panic was observed on ARM64 platform due to a stale
TLB entry.
1. ioremap with 4K size, a valid pte page table is set.
2. iounmap it, its pte entry is set to 0.
3. ioremap the same address with 2M size, update its pmd entry with
a new value.
4. CPU may hit an exception because the old pmd entry is still in TLB,
which leads to a kernel panic.
Commit b6bdb7517c ("mm/vmalloc: add interfaces to free unmapped page
table") has addressed this panic by falling to pte mappings in the above
case on ARM64.
To support pmd mappings in all cases, TLB purge needs to be performed
in this case on ARM64.
Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page()
so that TLB purge can be added later in seprate patches.
[toshi.kani@hpe.com: merge changes, rewrite patch description]
Fixes: 28ee90fe60 ("x86/mm: implement free pmd/pte page interfaces")
Signed-off-by: Chintan Pandya <cpandya@codeaurora.org>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: mhocko@suse.com
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com
Currently machine_kexec() doesn't reset to EL2 in the case of a
crashdump kernel. This leaves potentially dodgy state active at EL2, and
means that if the crashdump kernel attempts to online secondary CPUs,
these will be booted as mismatched ELs.
Let's reset to EL2, as we do in all other cases, and simplify things. If
EL2 state is corrupt, things are already sufficiently bad that kdump is
unlikely to work, and it's best-effort regardless.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The aarch64linux and aarch64linuxb emulation modes are not supported by
bare-metal toolchains and Linux using them forbids building the kernel
with these toolchains.
Since there is apparently no reason to target these emulation modes, the
more generic elf modes are used instead, allowing to build on bare-metal
toolchains as well as the already-supported ones.
Fixes: 3d6a7b99e3 ("arm64: ensure the kernel is compiled for LP64")
Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The cros-ec I2C and SPI transport drivers have been moved from MFD
subsystem to platform/chrome, at the same time, the config symbol has
been renamed and lost the MFD_ prefix, so update all configs to the new
config symbol name.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Do minor rearrangement as well to keep ordering consistent.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Simple overlapping changes in stmmac driver.
Adjust skb_gro_flush_final_remcsum function signature to make GRO list
changes in net-next, as per Stephen Rothwell's example merge
resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add CPU and PSCI nodes to device tree. The Tegra194 SoC contains
eight NVIDIA Carmel CPUs.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra194 contains the same ethernet controller as the Tegra186.
Add the device tree node for it, and correspondingly the PHY node
on the board device tree.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Now that we have a GPIO controller, enable the card detect GPIO for
the SD card slot.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the device tree node for the GPIO controller on Tegra194.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the required clocks for the new Stratix10 clock bindings
to the SPI nodes.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Peng Donglin <dolinux.peng@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
A smaller batch for the end of the week (let's see if I can keep the
weekly cadence going for once).
All medium-grade fixes here, nothing worrisome:
- Fixes for some fairly old bugs around SD card write-protect detection
and GPIO interrupt assignments on Davinci.
- Wifi module suspend fix for Hikey.
- Minor DT tweaks to fix inaccuracies for Amlogic platforms, on of
which solves booting with third-party u-boot.
-----BEGIN PGP SIGNATURE-----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=55JJ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A smaller batch for the end of the week (let's see if I can keep the
weekly cadence going for once).
All medium-grade fixes here, nothing worrisome:
- Fixes for some fairly old bugs around SD card write-protect
detection and GPIO interrupt assignments on Davinci.
- Wifi module suspend fix for Hikey.
- Minor DT tweaks to fix inaccuracies for Amlogic platforms, one
of which solves booting with third-party u-boot"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: hikey960: Define wl1837 power capabilities
arm64: dts: hikey: Define wl1835 power capabilities
ARM64: dts: meson-gxl: fix Mali GPU compatible string
ARM64: dts: meson-axg: fix ethernet stability issue
ARM64: dts: meson-gx: fix ATF reserved memory region
ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0
ARM64: dts: meson: fix register ranges for SD/eMMC
ARM64: dts: meson: disable sd-uhs modes on the libretech-cc
ARM: dts: da850: Fix interrups property for gpio
ARM: davinci: board-da850-evm: fix WP pin polarity for MMC/SD
- Added power capabilities for the mmc host controller on the
hikey and hikey960 boards to avoid broken wifi.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbNUZNAAoJEAvIV27ZiWZcRy8P/1z1LnU8CaxaxJo2yD02pq1X
EauFEMVOQP6zoV6+nrLRoMdZ8RSif4joOK5W+mv+9ZIkEeDZ7n5iL23ZNujcUYWH
a+B2zJ6jNMmpnTHADsadQBCtkX+OLlDFqCMmspV/equMgJNIEd8gPQg07jYklZZs
JG9Gb/ZvfILaX6/h3DfYiyc6+ILroxSdH1VgCfXVAA8umzDu5Sn6eakl1NbEYCTe
Wx1vfP0jbaxwPwLB0V6VVV5O/ByykVbf13iNVQMLXGn9bYQzbJ0DCzhZxlXsr2iH
Wrx1ur9oRaGCGsnPq2Koj0oy9mX1wfuDyEedN94SzQezAXUXiQh1yLr6RJitnSkP
cE/UJgNbLOccpzC9/px8ff7igAfLfFVEoFKRYLXmNu45wL7FEiPxrgS4IW4z5IcS
nXH8VBG8KYLWlurJsaHIvf4L4Iaga1Grz1fZrOISdUu9gOpSMrBrVy/u2DSJORWZ
ZG2LCfELPl62XnsE7NGxAV3198ui0SOB75/bdU2emEBwjqB+d7ljrBhPoWrFYk1u
EZ35wWxBwveGXYa7oiRZL7uo4mKHfKY1BAAPGqrK3Q91c+upMgx9+klkFZrRQt1f
FcP5sOPPLUISSvz8jG9mL7SHB7VDWSuN7iV/sWtdz6ayi4WimTX4dR5HIDKiweAF
IFKNuzJr09hEa+9kwH65
=mr1l
-----END PGP SIGNATURE-----
Merge tag 'hisi-fixes-for-4.18' of git://github.com/hisilicon/linux-hisi into fixes
ARM64: hisi fixes for 4.18
- Added power capabilities for the mmc host controller on the
hikey and hikey960 boards to avoid broken wifi.
* tag 'hisi-fixes-for-4.18' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hikey960: Define wl1837 power capabilities
arm64: dts: hikey: Define wl1835 power capabilities
Signed-off-by: Olof Johansson <olof@lixom.net>
This node is just a placeholder but fills that function better if it does
not trigger build warnings. This update satisfies the requirement that
nodes with #address-cells/#size-cells properties have more than one child
node.
This is flagged by dtc as follows:
# make dtbs W=1
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning (graph_child_address): /soc/sound@ec500000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dtb: Warning (graph_child_address): /soc/sound@ec500000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
The PSCI area should be reserved in Linux for PSCI operations such as
suspend/resume.
Reserve 2MiB of memory which matches the area used by ATF (BL1, BL2,
BL3x, see [1] in ATF source code). This covers all PSCI code and data
area and is 2MiB aligned, which is required by Linux for huge pages
handling.
Please note that this is a default setup allowing to perform PSCI
operations with legacy bootloaders. Recent bootloaders should update the
region size/position accordingly.
[1] plat/marvell/a3700/common/include/platform_def.h
Signed-off-by: Victor Gu <xigu@marvell.com>
[miquel.raynal@bootlin.com: reword of commit message, comment in the DTSI]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
In order to be able to use Adaptive Voltage Scaling, we need to add a
reference to these registers.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
These properties are required for compatibility with runtime PM.
Without these properties, MMC host controller will not be aware
of power capabilities. When the wlcore driver attempts to power
on the device, it will erroneously fail with -EACCES. This fixes
a regression found here: https://lkml.org/lkml/2018/6/12/930
Fixes: 60f36637bb ("wlcore: sdio: allow pm to handle sdio power")
Signed-off-by: Ryan Grachek <ryan@edited.us>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
These properties are required for compatibility with runtime PM.
Without these properties, MMC host controller will not be aware
of power capabilities. When the wlcore driver attempts to power
on the device, it will erroneously fail with -EACCES.
Fixes: 60f36637bb ("wlcore: sdio: allow pm to handle sdio power")
Signed-off-by: Ryan Grachek <ryan@edited.us>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
With recent dtc and W=1:
...salvator-x.dtb: Warning (graph_port): /soc/i2c@e66d8000/video-receiver@70/port@10: graph node unit address error, expected "a"
...salvator-x.dtb: Warning (graph_port): /soc/i2c@e66d8000/video-receiver@70/port@11: graph node unit address error, expected "b"
Unit addresses are always hexadecimal (without prefix), while the bases
of reg property values depend on their prefixes.
Fixes: 908001d778 ("arm64: dts: renesas: salvator-common: Add ADV7482 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
meson-gxl-mali.dtsi is only used on GXL SoCs. Thus it should use the GXL
specific compatible string instead of the GXBB one.
For now this is purely cosmetic since the (out-of-tree) lima driver for
this GPU currently uses the "arm,mali-450" match instead of the SoC
specific one. However, update the .dts to match the documentation since
this driver behavior might change in the future.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Like the odroid-c2 and wetek, the s400 uses the RTL8211F and seems to
suffer from the kind of stability issue.
Doing an iperf3 download test, we can see a significant number of LPI
interrupts on the tx path. After a short while (5 to 15 seconds), the
network connection dies. If using rootfs over NFS, the connection may
also break during the boot sequence.
We still don't have a real explanation for this problem so let's disable
EEE once again.
Fixes: f6f6ac914b ("ARM64: dts: meson-axg: enable ethernet for A113D S400 board")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Vendor firmware/uboot has different reserved regions depending on
firmware version, but current codebase reserves the same regions on
GXL and GXBB, so move the additional reserved memory region to common
.dtsi.
Found when putting a recent vendor u-boot on meson-gxbb-p200.
Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Like LibreTech-CC, the USB0 needs the 5V regulator to be enabled to power the
devices on the P212 Reference Design based boards.
Fixes: b9f07cb4f4 ("ARM64: dts: meson-gxl-s905x-p212: enable the USB controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Based on updated information from Amlogic, correct the register range
for the SD/eMMC blocks to the right size.
Reported-by: Yixun Lan <yixun.lan@amlogic.com>
Tested-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
There is a problem with the sd-uhs mode when doing a soft reboot.
Switching back from 1.8v to 3.3v messes with the card, which no longer
respond (timeout errors). According to the specification, we should
perform a card reset (power cycling the card) but this is something we
cannot control on this design.
Then the only solution to restore the communication with the card is an
"unplug-plug" which is not acceptable
Until we find a solution, if any, disable the sd-uhs modes on this design.
For the people using uhs at the moment, there will a performance drop as
a result.
Fixes: 3cde63ebc8 ("ARM64: dts: meson-gxl: libretech-cc: enable high speed modes")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
On usual A64 board design the power of HDMI controller is connected to
DLDO1 of the AXP803 PMIC. If this regulator is shut down, the HDMI
output will be blank. Therefore the simplefb driver should keep this
regulator on.
Add the regulator to all currently available A64 boards' simplefb_hdmi
device node, if the board is capable of outputing HDMI.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
As the U-Boot bootloader now is also capable of initialize the HDMI on
A64 boards, add a simplefb device tree node for accessing the HDMI
framebuffer initialized by the bootloader.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
As we have all necessary parts to enable the DE2 CCU on the Allwinner
A64 SoC, add the needed device tree nodes, including the DE2 CCU itself
and the DE2 bus.
The "mixer0-lcd0" simplefb device node is updated to use the DE2 CCU.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Commit 7f0b1bf045 ("arm64: Fix barriers used for page table modifications")
fixed a reported issue with fixmap page-table entries not being visible
to the walker due to a missing DSB instruction. At the same time, it added
ISB instructions to the arm64 set_{pte,pmd,pud} functions, which are not
required by the architecture and make little sense in isolation.
Remove the redundant ISBs.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The implementation of flush_icache_range() includes instruction sequences
which are themselves patched at runtime, so it is not safe to call from
the patching framework.
This patch reworks the alternatives cache-flushing code so that it rolls
its own internal D-cache maintenance using DC CIVAC before invalidating
the entire I-cache after all alternatives have been applied at boot.
Modules don't cause any issues, since flush_icache_range() is safe to
call by the time they are loaded.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Rohit Khanna <rokhanna@nvidia.com>
Cc: Alexander Van Brunt <avanbrunt@nvidia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A handful of fixes, nothing really concerning and most touching devicetree
files for various platforms.
I also regenerated the shared multiplatform defconfigs; they have drifted
quite a bit due to Kconfig changes and reordering, and several platform
maintainers tried doing the same which resulted in a lot of conflict pain
-- this way we get everybody onto the same base for next merge window.
-----BEGIN PGP SIGNATURE-----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=QzLy
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A handful of fixes, nothing really concerning and most touching
devicetree files for various platforms.
I also regenerated the shared multiplatform defconfigs; they have
drifted quite a bit due to Kconfig changes and reordering, and several
platform maintainers tried doing the same which resulted in a lot of
conflict pain -- this way we get everybody onto the same base for next
merge window"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
arm64: dts: uniphier: fix widget name of headphone for LD11/LD20 boards
ARM: dts: Fix SPI node for Arria10
arm64: dts: stratix10: Fix SPI nodes for Stratix10
qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependency
ARM: Always build secure_cntvoff.S on ARM V7 to fix shmobile !SMP build
ARM: multi_v7_defconfig: renormalize based on recent additions
arm64: defconfig: renormalize based on recent additions
arm64: dts: msm8916: fix Coresight ETF graph connections
arm64: dts: apq8096-db820c: disable uart0 by default
ARM: dts: imx6sx: fix irq for pcie bridge
arm64: dts: Stingray: Fix I2C controller interrupt type
arm64: dts: ns2: Fix PCIe controller interrupt type
arm64: dts: ns2: Fix I2C controller interrupt type
arm64: dts: specify 1.8V EMMC capabilities for bcm958742t
arm64: dts: specify 1.8V EMMC capabilities for bcm958742k
ARM: dts: Cygnus: Fix PCIe controller interrupt type
ARM: dts: Cygnus: Fix I2C controller interrupt type
ARM: dts: BCM5301x: Fix i2c controller interrupt type
ARM: dts: HR2: Fix interrupt types for i2c and PCIe
ARM: dts: NSP: Fix PCIe controllers interrupt types
...
R-Car E3 does not have the Stream Buffer for EtherAVB-IF (STBE).
Note that the RAVB driver does not use this region.
Fixes: 913a78b575 ("arm64: dts: renesas: r8a77990: Add EthernetAVB device nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch fixes wrong name of headphone widget for receiving events
of insert/remove headphone plug from simple-card or audio-graph-card.
If we use wrong widget name then we get warning messages such as
"asoc-audio-graph-card sound: ASoC: DAPM unknown pin Headphones"
when the plug is inserted or removed from headphone jack.
Fixes: fb21a0acaa ("arm64: dts: uniphier: add sound node")
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The right most SFP connector on the Macchiatobin board and schematics is
marked as CON13/CON14.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Update clock output names in the Stingray clock DT nodes so they match
the binding document and the latest ASIC datasheet. Also add entries
for LCPLL2
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Move common board components from base bcm958742 dtsi file to new
stingray-board-base dtsi file so they can be shared between many stingray
boards following common design.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This patch is to move ptp timer node out of fman.
Because ptp timer will be probed by ptp_qoriq driver,
it should be an independent device in case of conflict
memory mapping.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All architectures have implemented it, we can now remove the poor weak
version.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joel Fernandes <joel.opensrc@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1529981939-8231-11-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Migrate to the new API in order to remove arch_validate_hwbkpt_settings()
that clumsily mixes up architecture validation and commit.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joel Fernandes <joel.opensrc@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1529981939-8231-7-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We can't pass the breakpoint directly on arch_check_bp_in_kernelspace()
anymore because its architecture internal datas (struct arch_hw_breakpoint)
are not yet filled by the time we call the function, and most
implementation need this backend to be up to date. So arrange the
function to take the probing struct instead.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joel Fernandes <joel.opensrc@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1529981939-8231-3-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The Pine H64 has 3 GPIO-controlled LEDs, which are labeled "heartbeat",
"link", and "status".
Add device nodes for them.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Currently all ARM kernels will have s2idle enabled if CONFIG_SUSPEND is
present. In this case if the lid is closed, systemd-logind will enter
s2idle mode by default; however there's no possible wakeup source
defined, so the system will enter a forever idle.
Add the lid itself as a wakeup source, thus the system can wakeup when
the lid is opened.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Originally the name of the DLDO3 regulator on TERES-I is "eDP12", which
is not consistent with other regulator names.
Change it to "vdd-edp", in order to make it more consistent.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Remove leading 0x from recently introduced unit addresses to fix DTC
warnings:
Warning (unit_address_format): /soc/sysmmu@0x15040000: unit name should not have leading "0x"
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Remove no longer needed samsung thermal properties.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add EINT support to pinctrl and set those GPIO keys as interrupt-driven
keys.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This patch adds pin control for HSCIF1, and supports connection with
Debug Serial-1 (CN26) on Salvator boards.
SCIF1 and HSCIF1 are sharing the pins connected to Debug Serial-1 (CN26)
on Salvator boards, and it is necessary to ensure that either SCIF1 or
HSCIF1 is enabled, not both.
As for the default of this DeviceTree, SCIF1 is connected.
Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Add missing "uart-has-rtscts"]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe the interconnected FCPVD0, VSPD0, DU, and LVDS0 devices in the
R8A77980 device tree...
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Specify Ethernet PHY IRQs in the Condor/V3HSK board device trees, now that
we have the GPIO support (previously phylib had to resort to polling).
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds PCIe{0,1} device nodes to R8A77965 SoC.
Based on a similar patches of the R8A7796 device tree
by Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The VSPD and FCPVD nodes have overlapping register ranges, as the FCPVD
devices are mapped in the memory range usually used by the VSP LUT and
CLU, which are not present in the VSPD. Fix this by shortening the VSPD
registers range to 0x5000.
Fixes: 9f8573e38a ("arm64: dts: renesas: r8a7795: Add VSP instances")
Fixes: 291e0c4994 ("arm64: dts: r8a7795: Add support for R-Car H3 ES2.0")
Fixes: f06ffdfbdd ("arm64: dts: r8a7796: Add VSP instances")
Fixes: b4f92030d5 ("arm64: dts: renesas: r8a77970: add VSPD support")
Fixes: 295952a183 ("arm64: dts: renesas: r8a77995: add VSP instances")
Fixes: 85cb322921 ("arm64: dts: renesas: r8a77965: Add VSP instances")
Reported-by: Simon Horman <horms+renesas@verge.net.au>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe all 6 GPIO controllers in the R8A77980 device tree.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds USB2.0 PHY and Host(EHCI/OHCI) nodes and
enables them for R-Car E3 Ebisu board.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the second Cortex-A53 CPU core on the Renesas
R-Car E3 (r8a77990) SoC, and adjust the interrupt delivery masks for ARM
Generic Interrupt Controller and Architectured Timer.
Based on a patch in the BSP by Takeshi Kihara.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the Watchdog Timer (WDT) controller on the
R8A77990 SoC, and enable the watchdog on the Ebisu board.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Squashed 2 commits]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the Condor board dependent part of the I2C0 device node.
The I2C0 bus is populated by 2 ON Semiconductor PCA9654 I/O expanders
and Analog Devices ADV7511W HDMI transmitter (but we're only describing
the former chips now).
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A77980 parts of the I2C[0-5] device nodes.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Any of the following devices connected to I2C ch4 of the Salvator-X(S)
boards will operate at 400 kHz:
PCA9654, 9FGV0841, ADV7482WBBCZ, MAX9611, 5P49V5923, 5P49V6901A
This patch updates the clock frequency to 400 KHz.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[wsa: squashed commits into one]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds definitions for configuration of the power-source,
drive-strength, etc... for the SD2_DS pin for Salvator-X(S) and ULCB
boards.
Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[wsa: fixed for ULCB boards, too]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Based on a similar patch of the R8A7796 device tree
by Ulrich Hecht <ulrich.hecht+renesas@gmail.com>.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Replace the hardcoded clock indices by R8A77965_CLK_* symbols.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add bindings for CryptoCell instance in the SoC.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the Watchdog Timer (WDT) controller on the Renesas
R-Car M3-N (R8A77965) SoC.
Based on a similar patch of the R8A7796 device tree
by Geert Uytterhoeven <geert+renesas@glider.be>.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the V3H Starter Kit board dependent part of the GEther device node.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A77980 part of the GEther device node.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: add resets property]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
