Use the SoC-specific compat string for mmcif in DT for the r8a7778 SoC.
This is in keeping with the use of compat strings for mmcif for other
Renesas ARM based SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use the SoC-specific compat string for mmcif in DT for the r8a73a4 SoC.
This is in keeping with the use of compat strings for mmcif for other
Renesas ARM based SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
To preserve both alphabetical (label) and numerical ordering (unit
address).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
To preserve both alphabetical (label) and numerical ordering (unit
address).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change it.
We should only add the generic compatible string "hisi-gmac-v1".
Fixes: 0855950ba5 ("ARM: dts: hix5hd2: add gmac generic compatible and clock names")
Signed-off-by: Dongpo Li <lidongpo@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lots of changes as usual, so I'm trying to be brief here. Most of the
new hardware support has the respective driver changes merged through
other trees or has had it available for a while, so this is where things
come together.
We get a DT descriptions for a couple of new SoCs, all of them variants
of other chips we already support, and usually coming with a new
evaluation board:
- Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices
- Qualcomm MDM9615 LTE baseband
- NXP imx6ull, the latest and smallest i.MX6 application processor variant
- Renesas RZ/G (r8a7743 and r8a7745) application processors
- Rockchip PX3, a variant of the rk3188 chip used in Android tablets
- Rockchip rk1108 single-core application processor
- ST stm32f746 Cortex-M7 based microcontroller
- TI DRA71x automotive processors
These are commercially available consumer platforms we now support:
- Motorola Droid 4 (xt894) mobile phone
- Rikomagic MK808 Android TV stick based on Rockchips rx3066
- Cloud Engines PogoPlug v3 based on OX820
- Various Broadcom based wireless devices:
- Netgear R8500 router
- Tenda AC9 router
- TP-LINK Archer C9 V1
- Luxul XAP-1510 Access point
- Turris Omnia open hardware router based on Armada 385
And a couple of new boards targeted at developers, makers
or industrial integration:
- Macnica Sodia development platform for Altera socfpga (Cyclone V)
- MicroZed board based on Xilinx Zynq FPGA platforms
- TOPEET itop/elite based on exynos4412
- WP8548 MangOH Open Hardware platform for IOT, based on
Qualcomm MDM9615
- NextThing CHIP Pro gadget
- NanoPi M1 development board
- AM571x-IDK industrial board based on TI AM5718
- i.MX6SX UDOO Neo
- Boundary Devices Nitrogen6_SOM2 (i.MX6)
- Engicam i.CoreM6
- Grinn i.MX6UL liteSOM/liteBoard
- Toradex Colibri iMX6 module
Other changes:
- added peripherals on renesas, davinci, stm32f429, uniphier, sti,
mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm,
mvebu, allwinner, broadcom, exynos, zynq
- Continued fixes for W=1 dtc warnings
- The old STiH415/416 SoC support gets removed, these never made it into
products and have served their purpose in the kernel as a template
for teh newer chips from ST
- The exynos4415 dtsi file is removed as nothing uses it.
- Intel PXA25x can now be booted using devicetree
Conflicts:
arch/arm/boot/dts/r8a*.dtsi: a node was added
the clk tree, keep both sides and watch out for git
dropping the required '};' at the end of each side.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wJt3
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM DT updates from Arnd Bergmann:
"Lots of changes as usual, so I'm trying to be brief here. Most of the
new hardware support has the respective driver changes merged through
other trees or has had it available for a while, so this is where
things come together.
We get a DT descriptions for a couple of new SoCs, all of them
variants of other chips we already support, and usually coming with a
new evaluation board:
- Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices
- Qualcomm MDM9615 LTE baseband
- NXP imx6ull, the latest and smallest i.MX6 application processor variant
- Renesas RZ/G (r8a7743 and r8a7745) application processors
- Rockchip PX3, a variant of the rk3188 chip used in Android tablets
- Rockchip rk1108 single-core application processor
- ST stm32f746 Cortex-M7 based microcontroller
- TI DRA71x automotive processors
These are commercially available consumer platforms we now support:
- Motorola Droid 4 (xt894) mobile phone
- Rikomagic MK808 Android TV stick based on Rockchips rx3066
- Cloud Engines PogoPlug v3 based on OX820
- Various Broadcom based wireless devices:
- Netgear R8500 router
- Tenda AC9 router
- TP-LINK Archer C9 V1
- Luxul XAP-1510 Access point
- Turris Omnia open hardware router based on Armada 385
And a couple of new boards targeted at developers, makers or
industrial integration:
- Macnica Sodia development platform for Altera socfpga (Cyclone V)
- MicroZed board based on Xilinx Zynq FPGA platforms
- TOPEET itop/elite based on exynos4412
- WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615
- NextThing CHIP Pro gadget
- NanoPi M1 development board
- AM571x-IDK industrial board based on TI AM5718
- i.MX6SX UDOO Neo
- Boundary Devices Nitrogen6_SOM2 (i.MX6)
- Engicam i.CoreM6
- Grinn i.MX6UL liteSOM/liteBoard
- Toradex Colibri iMX6 module
Other changes:
- added peripherals on renesas, davinci, stm32f429, uniphier, sti,
mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm,
mvebu, allwinner, broadcom, exynos, zynq
- Continued fixes for W=1 dtc warnings
- The old STiH415/416 SoC support gets removed, these never made it
into products and have served their purpose in the kernel as a
template for teh newer chips from ST
- The exynos4415 dtsi file is removed as nothing uses it.
- Intel PXA25x can now be booted using devicetree"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (422 commits)
arm: dts: zynq: Add MicroZed board support
ARM: dts: da850: enable high speed for mmc
ARM: dts: da850: Add node for pullup/pulldown pinconf
ARM: dts: da850: enable memctrl and mstpri nodes per board
ARM: dts: da850-lcdk: Add ethernet0 alias to DT
ARM: dts: artpec: add pcie support
ARM: dts: add support for Turris Omnia
devicetree: Add vendor prefix for CZ.NIC
ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node
ARM: dts: berlin2q-marvell-dmp: fix regulators' name
ARM: dts: Add xo to sdhc clock node on qcom platforms
ARM: dts: r8a7794: Add device node for PRR
ARM: dts: r8a7793: Add device node for PRR
ARM: dts: r8a7792: Add device node for PRR
ARM: dts: r8a7791: Add device node for PRR
ARM: dts: r8a7790: Add device node for PRR
ARM: dts: r8a7779: Add device node for PRR
ARM: dts: r8a73a4: Add device node for PRR
ARM: dts: sk-rzg1e: add Ether support
ARM: dts: sk-rzg1e: initial device tree
...
As usual, we queue up a few fixes that don't seem urgent enough to go in
through -rc, or that just came a little too late given their size.
The zx fixes make the platform finally boot on real hardware, the
davinci and imx31 get the DT support working better for some of
the machines that are still normally used with classic board files.
One tegra fix is important for new bootloader versions, but the
bug has been around for a while without anyone noticing.
The other changes are mostly cosmetic.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=i2l2
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-urgent fixes from Arnd Bergmann:
"As usual, we queue up a few fixes that don't seem urgent enough to go
in through -rc, or that just came a little too late given their size.
The zx fixes make the platform finally boot on real hardware, the
davinci and imx31 get the DT support working better for some of the
machines that are still normally used with classic board files. One
tegra fix is important for new bootloader versions, but the bug has
been around for a while without anyone noticing.
The other changes are mostly cosmetic"
* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
arm64: tegra: Add missing Smaug revision
arm64: tegra: Add VDD_GPU regulator to Jetson TX1
arm64: dts: zte: clean up gic-v3 redistributor properties
arm64: dts: zx: Fix gic GICR property
bus: vexpress-config: fix device reference leak
soc: ti: qmss: fix the case when !SMP
ARM: lpc32xx: drop duplicate header device.h
ARM: ixp4xx: drop duplicate header gpio.h
ARM: socfpga: fix spelling mistake in error message
ARM: dts: imx6q-cm-fx6: fix fec pinctrl
ARM: dts: imx7d-pinfunc: fix UART pinmux defines
ARM: dts: imx6qp: correct LDB clock inputs
ARM: OMAP2+: pm-debug: Use seq_putc() in two functions
ARM: OMAP2+: Remove the omapdss_early_init_of() function
mfd: tps65217: Fix mismatched interrupt number
ARM: zx: Fix error handling
ARM: spear: Fix error handling
ARM: davinci: da850: Fix pwm name matching
ARM: clk: imx31: properly init clocks for machines with DT
clk: imx31: fix rewritten input argument of mx31_clocks_init()
...
Fairly routine update this time around with all changes specific to drivers.
o New driver for STMicroelectronics FDMA
o Memory-to-memory transfers on dw dmac
o Support for slave maps on pl08x devices
o Bunch of driver fixes to use dma_pool_zalloc
o Bunch of compile and warning fixes spread across drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Pf0d
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"Fairly routine update this time around with all changes specific to
drivers:
- New driver for STMicroelectronics FDMA
- Memory-to-memory transfers on dw dmac
- Support for slave maps on pl08x devices
- Bunch of driver fixes to use dma_pool_zalloc
- Bunch of compile and warning fixes spread across drivers"
[ The ST FDMA driver already came in earlier through the remoteproc tree ]
* tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
dmaengine: sirf-dma: remove unused ‘sdesc’
dmaengine: pl330: remove unused ‘regs’
dmaengine: s3c24xx: remove unused ‘cdata’
dmaengine: stm32-dma: remove unused ‘src_addr’
dmaengine: stm32-dma: remove unused ‘dst_addr’
dmaengine: stm32-dma: remove unused ‘sfcr’
dmaengine: pch_dma: remove unused ‘cookie’
dmaengine: mic_x100_dma: remove unused ‘data’
dmaengine: img-mdc: remove unused ‘prev_phys’
dmaengine: usb-dmac: remove unused ‘uchan’
dmaengine: ioat: remove unused ‘res’
dmaengine: ioat: remove unused ‘ioat_dma’
dmaengine: ioat: remove unused ‘is_raid_device’
dmaengine: pl330: do not generate unaligned access
dmaengine: k3dma: move to dma_pool_zalloc
dmaengine: at_hdmac: move to dma_pool_zalloc
dmaengine: at_xdmac: don't restore unsaved status
dmaengine: ioat: set error code on failures
dmaengine: ioat: set error code on failures
dmaengine: DW DMAC: add multi-block property to device tree
...
Here's the big set of USB/PHY patches for 4.10-rc1.
A number of new drivers are here in this set of changes. We have a new
USB controller type "mtu3", a new usb-serial driver, and the usual churn
in the gadget subsystem and the xhci host controller driver, along with
a few other new small drivers added. And lots of little other changes
all over the USB and PHY driver tree. Full details are in the shortlog
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWFAxRg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynuLgCgsHgM/oba6UaVm1kmyN9V5e3PVjEAn34tRLht
R4enLi8Yv1bOWPdlrpzN
=3MGJ
-----END PGP SIGNATURE-----
Merge tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here's the big set of USB/PHY patches for 4.10-rc1.
A number of new drivers are here in this set of changes. We have a new
USB controller type "mtu3", a new usb-serial driver, and the usual
churn in the gadget subsystem and the xhci host controller driver,
along with a few other new small drivers added. And lots of little
other changes all over the USB and PHY driver tree. Full details are
in the shortlog
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (309 commits)
USB: serial: option: add dlink dwm-158
USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041
USB: OHCI: nxp: fix code warnings
USB: OHCI: nxp: remove useless extern declaration
USB: OHCI: at91: remove useless extern declaration
usb: misc: rio500: fix result type for error message
usb: mtu3: fix U3 port link issue
usb: mtu3: enable auto switch from U3 to U2
usbip: fix warning in vhci_hcd_probe/lockdep_init_map
usb: core: usbport: Use proper LED API to fix potential crash
usbip: add missing compile time generated files to .gitignore
usb: hcd.h: construct hub class request constants from simpler constants
USB: OHCI: ohci-pxa27x: remove useless functions
USB: OHCI: omap: remove useless extern declaration
USB: OHCI: ohci-omap: remove useless functions
USB: OHCI: ohci-s3c2410: remove useless functions
USB: cdc-acm: add device id for GW Instek AFG-125
fsl/usb: Workarourd for USB erratum-A005697
usb: hub: Wait for connection to be reestablished after port reset
usbip: vudc: Refactor init_vudc_hw() to be more obvious
...
framework. The only patch that can even be considered "core" adds another
clk_get() variant. The rest of the changes are in drivers for various SoCs, and
we have a few bits for ARM shmobile architecture code (dts and mach) due to the
dependency we're breaking between shmobile architecture code and its clk
driver. Those shmobile bits have also been pulled into arm-soc tree. Here's the
summary:
Core:
- Support for devm_get_clk_from_child() used with DT bindings that have
subnodes with the 'clocks' property
New Drivers:
- Allwinner A64 (sun50i)
- i.MX imx6ull
- Socionext's UniPhier SoC CPUs
- Mediatek MT2701 SoCs
- Rockchip rk1108 SoCs
- Qualcomm MSM8994/MSM8992 SoCS
- Qualcomm RPM Clocks
- Hisilicon Hi3516CV300 and Hi3798CV200 CRG
- Oxford Semiconductor OX820 and OX810SE SoCs
- Renesas RZ/G1M and RZ/GIE SoCs
- Renesas R-Car RST driver for mode pin states
Updates:
- Four Allwinner SoCs are migrated to the new style clk driver
- Rockchip rk3399,rk3066 PLL optimizations
- i.MX LVDS display glitch fixes and AV PLL precision improvements
- Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL support
- Explicit demodularization of always builtin drivers
- Freescale Qoriq ls1012a and ls1046a support
- Exynos 5433 parent typo fix and critical clock tagging
- Renesas r8a7743/r8a7745 CPG
- Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support
- stm32f4* LSI, LSE, RTC, and QSPI clocks
- pxa27x and pxa25x cpufreq as clks
- TI omap36xx sprz319 advisory 2.1 workaround
- Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=RXZr
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is a fairly quiet release. We don't have any patches to the core
framework. The only patch that can even be considered "core" adds
another clk_get() variant. The rest of the changes are in drivers for
various SoCs, and we have a few bits for ARM shmobile architecture
code (dts and mach) due to the dependency we're breaking between
shmobile architecture code and its clk driver. Those shmobile bits
have also been pulled into arm-soc tree. Here's the summary:
Core:
- Support for devm_get_clk_from_child() used with DT bindings that
have subnodes with the 'clocks' property
New Drivers:
- Allwinner A64 (sun50i)
- i.MX imx6ull
- Socionext's UniPhier SoC CPUs
- Mediatek MT2701 SoCs
- Rockchip rk1108 SoCs
- Qualcomm MSM8994/MSM8992 SoCS
- Qualcomm RPM Clocks
- Hisilicon Hi3516CV300 and Hi3798CV200 CRG
- Oxford Semiconductor OX820 and OX810SE SoCs
- Renesas RZ/G1M and RZ/GIE SoCs
- Renesas R-Car RST driver for mode pin states
Updates:
- Four Allwinner SoCs are migrated to the new style clk driver
- Rockchip rk3399,rk3066 PLL optimizations
- i.MX LVDS display glitch fixes and AV PLL precision improvements
- Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL
support
- Explicit demodularization of always builtin drivers
- Freescale Qoriq ls1012a and ls1046a support
- Exynos 5433 parent typo fix and critical clock tagging
- Renesas r8a7743/r8a7745 CPG
- Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support
- stm32f4* LSI, LSE, RTC, and QSPI clocks
- pxa27x and pxa25x cpufreq as clks
- TI omap36xx sprz319 advisory 2.1 workaround
- Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate()
clk: add devm_get_clk_from_child() API
clk: st: clk-flexgen: Unmap region obtained by of_iomap
clk: keystone: pll: Unmap region obtained by of_iomap
clk:mmp:clk-of-mmp2: Free memory and Unmap region obtained by kzalloc and of_iomap
clk:mmp:clk-of-pxa910: Free memory and Unmap region obtained by kzmalloc and of_iomap
clk: mmp: clk-of-pxa1928: Free memory obtained by kzalloc
clk: cdce925: Fix limit check
clk: bcm: Make COMMON_CLK_IPROC into a library
clk: qoriq: added ls1012a clock configuration
clk: ti: dra7: fix "failed to lookup clock node gmac_gmii_ref_clk_div" boot message
clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock
clk: bcm: Support rate change propagation on bcm2835 clocks
clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk
clk: ti: omap36xx: Work around sprz319 advisory 2.1
clk: clk-wm831x: fix a logic error
clk: uniphier: add cpufreq data for LD11, LD20 SoCs
clk: uniphier: add CPU-gear change (cpufreq) support
clk: qcom: Put venus core0/1 gdscs to hw control mode
clk: qcom: gdsc: Add support for gdscs with HW control
...
Bug report from Debian [0] shows there's minor changed model of
Linkstation LS-GL that uses the 2nd SATA port of the SoC.
So it's necessary to enable two SATA ports, though for that specific
model only the 2nd one is used.
[0] https://bugs.debian.org/845611
Fixes: b1742ffa9d ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl")
Reported-by: Ryan Tandy <ryan@nardis.ca>
Tested-by: Ryan Tandy <ryan@nardis.ca>
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The eLCDIF IP of the i.MX 7 SoC knows multiple clocks and lists them
separately:
Clock Clock Root Description
apb_clk MAIN_AXI_CLK_ROOT AXI clock
pix_clk LCDIF_PIXEL_CLK_ROOT Pixel clock
ipg_clk_s MAIN_AXI_CLK_ROOT Peripheral access clock
All of them are switched by a single gate, which is part of the
IMX7D_LCDIF_PIXEL_ROOT_CLK clock. Hence using that clock also for
the AXI bus clock (clock-name "axi") makes sure the gate gets
enabled when accessing registers.
There seem to be no separate AXI display clock, and the clock is
optional. Hence remove the dummy clock.
This fixes kernel freezes when starting the X-Server (which
disables/re-enables the display controller).
Fixes: e8ed73f691 ("ARM: dts: imx7d: add lcdif support")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
In a previous commit, I made a copy/paste error in the pinmux
definitions of UART3: PG{13,14} instead of PA{13,14}. This commit takes
care of that. I have tested this commit on Orange Pi PC and Orange Pi
Plus, and it works for these boards.
Fixes: e3d11d3c45 ("dts: sun8i-h3: add pinmux definitions for
UART2-3")
Signed-off-by: Jorik Jonker <jorik@kippendief.biz>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
bias control on DA850.
- Enable high speed support on DA850 MMC/SD
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=w2Ug
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.10/dt-4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
- Add device tree nodes for pin pull-up/pull-down
bias control on DA850.
- Enable high speed support on DA850 MMC/SD
* tag 'davinci-for-v4.10/dt-4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850: enable high speed for mmc
ARM: dts: da850: Add node for pullup/pulldown pinconf
Signed-off-by: Olof Johansson <olof@lixom.net>
The mmc controller in da850 supports high speed modes
so add cap-sd-highspeed and cap-mmc-highspeed.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Couple conflicts resolved here:
1) In the MACB driver, a bug fix to properly initialize the
RX tail pointer properly overlapped with some changes
to support variable sized rings.
2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix
overlapping with a reorganization of the driver to support
ACPI, OF, as well as PCI variants of the chip.
3) In 'net' we had several probe error path bug fixes to the
stmmac driver, meanwhile a lot of this code was cleaned up
and reorganized in 'net-next'.
4) The cls_flower classifier obtained a helper function in
'net-next' called __fl_delete() and this overlapped with
Daniel Borkamann's bug fix to use RCU for object destruction
in 'net'. It also overlapped with Jiri's change to guard
the rhashtable_remove_fast() call with a check against
tc_skip_sw().
5) In mlx4, a revert bug fix in 'net' overlapped with some
unrelated changes in 'net-next'.
6) In geneve, a stale header pointer after pskb_expand_head()
bug fix in 'net' overlapped with a large reorganization of
the same code in 'net-next'. Since the 'net-next' code no
longer had the bug in question, there was nothing to do
other than to simply take the 'net-next' hunks.
Signed-off-by: David S. Miller <davem@davemloft.net>
This SoC has a separate pin controller for configuring pullup/pulldown
bias on groups of pins.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
- Fix up new instances of gpio-key,wakeup to use wakeup-source
- Add beaglebone LCDC blue-and-red-wiring property to make use
of the new driver features
- Add bindings for IIO support for am335x and am437x
- Add palmas PMIC overide powerhold property for am57xx
- Update am335x-baltos to use phy-handle property
- Add initial support for am571x-idk
-----BEGIN PGP SIGNATURE-----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=Mk8K
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.10/dt-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "omap dts changes for v4.10, part 2" from Tony Lindgren:
Second set of device tree changes for omaps for v4.10 merge window:
- Fix up new instances of gpio-key,wakeup to use wakeup-source
- Add beaglebone LCDC blue-and-red-wiring property to make use
of the new driver features
- Add bindings for IIO support for am335x and am437x
- Add palmas PMIC overide powerhold property for am57xx
- Update am335x-baltos to use phy-handle property
- Add initial support for am571x-idk
* tag 'omap-for-v4.10/dt-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: AM571x-IDK Initial Support
ARM: dts: am335x-baltos: use phy-phandle declarations
ARM: dts: am57xx-idk-common: Add overide powerhold property
ARM: dts: am57xx-beagle-x15-common: Add overide powerhold property
ARM: dts: am57xx-idk: Add Industrial output support
ARM: dts: am57xx-idk: Add Industrial input support
ARM: dts: am437x-idk: Add Industrial output support
ARM: dts: am437x-idk: Add Industrial input support
ARM: dts: am335x-icev2: Add ADC support
ARM: dts: am335x-icev2: Disable Industrial I/O LEDs and fix naming
ARM: dts: am335x-icev2: Add Industrial input support
ARM: dts: am335x-boneblack: Add blue-and-red-wiring -property to LCDC node
ARM: dts: omap5: replace gpio-key,wakeup with wakeup-source property
Add Turris Omnia support, an open hardware router Armada 385 based
-----BEGIN PGP SIGNATURE-----
iGoEABECACoFAlg5WBkjHGdyZWdvcnkuY2xlbWVudEBmcmVlLWVsZWN0cm9ucy5j
b20ACgkQCwYYjhRyO9V4SwCeI0Ts8X8KIm6RWQgpwls8NJMM8sQAnRajp/psJgWF
5Rvn8aOROyyKIAkY
=N1hs
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.10-2' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu dt for 4.10 (part 1)" from Gregory CLEMENT:
Add Turris Omnia support, an open hardware router Armada 385 based
* tag 'mvebu-dt-4.10-2' of git://git.infradead.org/linux-mvebu:
ARM: dts: add support for Turris Omnia
devicetree: Add vendor prefix for CZ.NIC
as well as enabling the dma for uart and mmc controllers.
And one new soc, the rk1108 combining a single-core Cortex-A7
with a separate DSP core.
-----BEGIN PGP SIGNATURE-----
iQEtBAABCAAXBQJYNj8LEBxoZWlrb0BzbnRlY2guZGUACgkQ86Z5yZzRHYE3oggA
j0b99/r3uGOavo9nun2yJTqq/bKhjAAupNhrEJtjKP9gdbR/1HOkjzRX/1g9ID36
b5cMpOePpRN9xCg0IyK4/+0jgXJ1r41Fp1yEI51Z57jlo0WMzP10/E8hGwNQgW7Q
QSAPrTZbwLcrDjq7cOHrF8WvuMnA+6ye77IcDFJ0ZjtU7PYwfO63VTIJ/37Ph3FE
wlDb0YH57nrn13qUlK8UDJJysl1v2H8NP48/5qEfgF/swbyt6VKkaL2Q+Ua2aDys
AaH2oTRUPBSPqqXj78OKrWfHB8U5WWfn7PvDYxyjYcnOnasvE7kEBlmw4P955QDM
XzEEXkiEcQFMLoEiWim5Xw==
=2VYn
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "Rockchip dts32 changes for 4.10" from Heiko Stübner:
A bit of attention for the rk3066, fixed tsadc reset node
as well as enabling the dma for uart and mmc controllers.
And one new soc, the rk1108 combining a single-core Cortex-A7
with a separate DSP core.
* tag 'v4.10-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add the sdmmc pinctrl for rk1108
ARM: dts: rockchip: add rockchip RK1108 Evaluation board
ARM: dts: rockchip: add basic support for RK1108 SOC
clk: rockchip: add dt-binding header for rk1108
dt-bindings: rockchip-dw-mshc: add RK1108 dw-mshc description
ARM: dts: rockchip: enable dma for uart and mmc on rk3066a
ARM: dts: rockchip: fix TSADC reset node for rk3066a
* Add SDHC xo clk
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=LQog
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Pull "Qualcomm Device Tree Changes for v4.10 - Part 2" from Andy Gross:
* Add SDHC xo clk
* tag 'qcom-dts-for-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: Add xo to sdhc clock node on qcom platforms
please pull the following:
- Rafal adds support for the Netgear R8500 routers, adds basic support
for the Tenda AC9 router which uses the new BCM53573 SoC (single core Cortex
A7). He also enables the UART on the Netgear R8000 and restructures the
include files a bit for the BCM47094 SoC, finally he adds USB 3.0 PHY nodes
which enables USB 3.0 on BCM5301X devices that support it. Finally he adds
support for the TP-LINK Archer C9 V1 router.
- Kamal adds support for the QSPI controller on the Northstar Plus SoCs and updates
the bcm958625k reference board to have it enabled
- Dan adds support for the Luxul XAP-1510 (using a BCM4708) and XWR-3100 (using
a BCM47094)
- Scott fixes the pinctrl names in the Cygnus DTS files
- Jonathan enables the Broadcom iProc mailbox controller for Broadcom Cygnus/iProc
SoCs, he adds interrupt support for the GPIO CRMU hardware block and finally adds
the node for the OTP controller found on Cygnus SoCs
- Dhananjay enables the GPIO B controller on Norstarh Plus SoCs
- Eric defines standard pinctrl groups in the BCM2835 GPIO node
- Gerd adds definitions for the pinctrl groups and updates the PWM, I2C and SDHCI nodes
to use their appropriate pinctrl functions
- Linus adds names for the Raspberry Pi GPIO lines based on the datasheet
- Martin adds the DT binding and nodes for the Raspberry Pi firmware thermal block
- Stefan fixes a few typos with respect to the BCM2835 mailbox binding example and
Device Tree nodes he also fixes the Raspberry Pi GPIO lines names and finally
adds names for the Raspberry Zero GPIO lines
-----BEGIN PGP SIGNATURE-----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=4GFQ
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.10/devicetree' of http://github.com/Broadcom/stblinux into next/dt
Pull "Broadcom devicetree changes for 4.10" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.10,
please pull the following:
- Rafal adds support for the Netgear R8500 routers, adds basic support
for the Tenda AC9 router which uses the new BCM53573 SoC (single core Cortex
A7). He also enables the UART on the Netgear R8000 and restructures the
include files a bit for the BCM47094 SoC, finally he adds USB 3.0 PHY nodes
which enables USB 3.0 on BCM5301X devices that support it. Finally he adds
support for the TP-LINK Archer C9 V1 router.
- Kamal adds support for the QSPI controller on the Northstar Plus SoCs and updates
the bcm958625k reference board to have it enabled
- Dan adds support for the Luxul XAP-1510 (using a BCM4708) and XWR-3100 (using
a BCM47094)
- Scott fixes the pinctrl names in the Cygnus DTS files
- Jonathan enables the Broadcom iProc mailbox controller for Broadcom Cygnus/iProc
SoCs, he adds interrupt support for the GPIO CRMU hardware block and finally adds
the node for the OTP controller found on Cygnus SoCs
- Dhananjay enables the GPIO B controller on Norstarh Plus SoCs
- Eric defines standard pinctrl groups in the BCM2835 GPIO node
- Gerd adds definitions for the pinctrl groups and updates the PWM, I2C and SDHCI nodes
to use their appropriate pinctrl functions
- Linus adds names for the Raspberry Pi GPIO lines based on the datasheet
- Martin adds the DT binding and nodes for the Raspberry Pi firmware thermal block
- Stefan fixes a few typos with respect to the BCM2835 mailbox binding example and
Device Tree nodes he also fixes the Raspberry Pi GPIO lines names and finally
adds names for the Raspberry Zero GPIO lines
* tag 'arm-soc/for-4.10/devicetree' of http://github.com/Broadcom/stblinux: (29 commits)
ARM: bcm2835: Add names for the RPi Zero GPIO lines
ARM: bcm2835: Fix names for the Raspberry Pi GPIO lines
ARM: dts: enable GPIO-b for Broadcom NSP
ARM: BCM5301X: Add DT for TP-LINK Archer C9 V1
ARM: dts: Add node for Broadcom OTP controller driver
ARM: dts: Enable interrupt support for cygnus crmu gpio driver
ARM: dts: Enable Broadcom iProc mailbox controller
ARM: bcm2835: Add names for the Raspberry Pi GPIO lines
ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
dt: bindings: add thermal device driver for bcm2835
ARM: dts: bcm283x: fix typo in mailbox address
DT: binding: bcm2835-mbox: fix address typo in example
ARM: dts: cygnus: fix naming of pinctrl node
ARM: BCM53573: Specify PMU and its ILP clock in the DT
ARM: BCM5301X: Add DT for Luxul XWR-3100
ARM: BCM5301X: Add DT for Luxul XAP-1510
ARM: BCM5301X: Specify USB 3.0 PHY in DT
ARM: BCM5301X: Enable UART on Netgear R8000
ARM: BCM5301X: Add separated DTS include file for BCM47094
ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes
...
- Fix SD card detect polarity
- Prevent Ethernet from picking a random mac address
- Fix error messages on platforms which dont use
bus master and emif priority settings.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mrAJ
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.10/dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
Pull "DaVinci DT updates for v4.10 (part 3)" from Sekhar Nori:
Some fixes for device-tree patches already queued.
- Fix SD card detect polarity
- Prevent Ethernet from picking a random mac address
- Fix error messages on platforms which dont use
bus master and emif priority settings.
* tag 'davinci-for-v4.10/dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850: enable memctrl and mstpri nodes per board
ARM: dts: da850-lcdk: Add ethernet0 alias to DT
ARM: dts: da850-lcdk: fix mmc card detect polarity
and bus master priority settings needed for
stable LCDC operation on DA850.
Also adds support for MUSB device on DA850
providing USB OTG support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=GK5j
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.10/dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
Pull "DaVinci DT updates for v4.10 (part 2)" from Sekhar Nori:
Adds device tree nodes enabling DDR controller
and bus master priority settings needed for
stable LCDC operation on DA850.
Also adds support for MUSB device on DA850
providing USB OTG support.
* tag 'davinci-for-v4.10/dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lcdk: Enable the usb otg device node
ARM: dts: da850: Add the usb otg device node
ARM: dts: da850: add the mstpri and ddrctl nodes
Several versions of DW DMAC have multi block transfers hardware
support. Hardware support of multi block transfers is disabled
by default if we use DT to configure DMAC and software emulation
of multi block transfers used instead.
Add multi-block property, so it is possible to enable hardware
multi block transfers (if present) via DT.
Switch from per device is_nollp variable to multi_block array
to be able enable/disable multi block transfers separately per
channel.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Currently the memory controller and master priorities drivers are
enabled in da850.dtsi. For boards for which there are no settings
defined, this makes these drivers emit error messages.
Disable the nodes in da850.dtsi and only enable them for da850-lcdk -
the only board that currently needs them.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
In order to avoid Linux generating a random mac address on every boot,
add an ethernet0 alias that will allow u-boot to patch the dtb with
the MAC address programmed into the EEPROM.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The usual bunch of DT additions, but most notably:
- A31 DRM driver
- A31 audio codec
- WiFi for the A80-Based boards and the CHIP
- Support for the NextThing Co CHIP Pro (the first board with NAND
enabled)
- New board: NanoPi M1
-----BEGIN PGP SIGNATURE-----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=cln8
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.10-bis' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt
Pull "Allwinner DT additions for 4.10, bis" from Maxime Ripard:
The usual bunch of DT additions, but most notably:
- A31 DRM driver
- A31 audio codec
- WiFi for the A80-Based boards and the CHIP
- Support for the NextThing Co CHIP Pro (the first board with NAND
enabled)
- New board: NanoPi M1
* tag 'sunxi-dt-for-4.10-bis' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (41 commits)
ARM: dts: sun6i: hummingbird-a31: Enable display output through VGA bridge
ARM: dts: sun5i: Add touchscreen node to reference-design-tablet.dtsi
ARM: sunxi: Add the missing clocks to the pinctrl nodes
ARM: dts: sun7i: bananapi-m1-plus: Enable USB OTG
ARM: dts: sun7i: bananapi-m1-plus: Add PMIC regulators
ARM: dts: sun7i: bananapi-m1-plus: Enable USB PHY for USB host support
ARM: sun8i: sina33: Enable USB gadget
ARM: dts: sun8i: reference-design-tablet: ldo_io1 is vcc-touchscreen
ARM: dts: sun8i: replace enable-sdio-wakeup with wakeup-source for BananaPi M1+
ARM: gr8: evb: Add i2s codec
ARM: dts: sun6i: sina31s: Enable internal audio codec
ARM: dts: sun6i: hummingbird: Enable internal audio codec
ARM: dts: sun6i: Add audio codec device node
ARM: gr8: evb: Enable SPDIF
ARM: dts: sun8i: Add SPI controller node in H3
ARM: dts: sun8i: Add SPI pinctrl node in H3
ARM: dts: sun8i: Add dts file for NanoPi M1 SBC
ARM: dts: sun8i: Use the common file in NanoPi NEO SBC
ARM: dts: sun8i: Add common dtsi file for NanoPi SBCs
ARM: dts: sun9i: cubieboard4: Enable AP6330 WiFi
...
Add missing pinmux declaration for netgear NASes
Fix i2c compatible string for netgear NASes
Fix on a wrong comment about PLL frequency
Fix spelling mistake of the manufacturer's name of the Topkick
Add dt support for the orion5x ls-chl Linkstation device
First step of fixing DTC warning for Armada 370, 375 and XP
-----BEGIN PGP SIGNATURE-----
iGoEABECACoFAlgwC9wjHGdyZWdvcnkuY2xlbWVudEBmcmVlLWVsZWN0cm9ucy5j
b20ACgkQCwYYjhRyO9VAsgCfdqwKz5V7XP/xfkIUxoykhtrLL4QAoJlAAwV+UG2U
Gbvc3BMoymvienDl
=06ld
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.10-1' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu dt for 4.10 (part 1)" from Gregory CLEMENT:
Add missing pinmux declaration for netgear NASes
Fix i2c compatible string for netgear NASes
Fix on a wrong comment about PLL frequency
Fix spelling mistake of the manufacturer's name of the Topkick
Add dt support for the orion5x ls-chl Linkstation device
First step of fixing DTC warning for Armada 370, 375 and XP
* tag 'mvebu-dt-4.10-1' of git://git.infradead.org/linux-mvebu: (30 commits)
ARM: dts: armada-375: Fixup ethernet child DT warning
ARM: dts: armada-375: Fixup memory DT warning
ARM: dts: armada-375: Remove skeleton.dtsi
ARM: dts: armada-375: Fixup pinctrl DT warnings
ARM: dts: armada-375: Fixup pcie DT warnings
ARM: dts: armada-375: Fixup mdio DT warning
ARM: dts: armada-375: Use the node labels
ARM: dts: armada-375: Add node labels
ARM: dts: armada-370-xp: Fixup regulator DT warning
ARM: dts: armada-370-xp: Remove button address and fixup names
ARM: dts: armada-370-xp: Remove address from dsa unit name
ARM: dts: armada-370-xp: Fixup memory DT warning
ARM: dts: armada-370-xp: Fixup l2-cache DT warning
ARM: dts: armada-370-xp: Remove skeleton.dtsi
ARM: dts: armada-370: Fixup pcie DT warnings
ARM: dts: armada-xp: Fixup pcie DT warnings
ARM: dts: armada-370-xp: Fixup mdio DT warning
ARM: dts: armada-370-xp: Use the node labels
ARM: dts: armada-370-xp: add node labels
ARM: dts: armada-370-xp: move the cpurst node in the common file
...
Add PCIe support to the ARTPEC-6 SoC. This uses the existing
pcie-artpec6 driver.
So, all that is needed is device tree entries in the DTS.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
The I2C nodes are missing #address-cells and #size-cells.
This is causing warning at device tree compilation when
some I2C device sub-nodes are defined.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nQve
-----END PGP SIGNATURE-----
Merge tag 'sti-dt-for-v4.9-rc-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into fixes
Pull "STi DT fix" from Patrice Chotard:
The I2C nodes are missing #address-cells and #size-cells.
This is causing warning at device tree compilation when
some I2C device sub-nodes are defined.
* tag 'sti-dt-for-v4.9-rc-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: STiH407-family: fix i2c nodes
A renaming of the GR8 DTSI and DTS to make it explicitly part of the sun5i
family.
-----BEGIN PGP SIGNATURE-----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=Mw6R
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Pull "Allwinner fixes for 4.9, second iteration" from Maxime Ripard:
A renaming of the GR8 DTSI and DTS to make it explicitly part of the sun5i
family.
* tag 'sunxi-fixes-for-4.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: gr8: Rename the DTSI and relevant DTS
This machine is an open hardware router by cz.nic driven by a
Marvell Armada 385.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This patch fixes the following DTC warnings with W=1:
Warning (unit_address_vs_reg): Node /regulators/regulator@0 has a unit
name, but no reg property
Warning (unit_address_vs_reg): Node /regulators/regulator@1 has a unit
name, but no reg property
Warning (unit_address_vs_reg): Node /regulators/regulator@2 has a unit
name, but no reg property
Warning (unit_address_vs_reg): Node /regulators/regulator@3 has a unit
name, but no reg property
Warning (unit_address_vs_reg): Node /regulators/regulator@4 has a unit
name, but no reg property
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Add xo entry to sdhc clock node on all qcom platforms.
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
