Commit Graph

7850 Commits

Author SHA1 Message Date
Daniel Vetter
eae307a530 drm/i915: rip out crtc prepare/commit indirection
Just impendance matching with the the crtc helper stuff.

... and somehow the design of this all ended up in this commit here,
too ;-)

The big plan is that this new set of crtc display_funcs take full
responsibility of modeset operations for the entire display output
pipeline (by calling down into object-specific callbacks and
functions). The platform-specific callbacks simply know best what the
proper order is.

This has the drawback that we can't do minimal change-overs any more
if a modeset just disables one encoder in a cloned configuration
(because we will only expose a disable/enable action that takes
down/sets up the entire crtc including all encoders). Imo that's the
only sane way to do it though:
- The use-case for this is pretty minimal, even when presenting (at
  least sane people) should use a dual-screen output so that you can
  see your notes on your panel. Clone mode is imo BS.
- With all the clone mode constrains, shared resources, and special
  ordering requirements (which differ even on the same platform
  sometimes for different outputs) there's no way we'd get this right
  for all cases. Especially since this is a under-used feature.
- And to top it off: On haswell even dp link re-training requires us
  to take down the entire display pipe - otherwise the chip dies.

So the only sane way is to do a full modeset on every crtc where the
output config changes in any way.

To support global modeset (i.e. set the configuration for all crtcs at
once) we'd then add one more function to allocate global and shared
objects in the best ways (e.g. fdi links, pch plls, ...). The crtc
functions would then simply use the pre-allocated stuff (and shouldn't
be able to fail, ever). We could even do all the object pinning in
there (and maybe try to defragment the global gtt if we fail)!

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:53:10 +02:00
Daniel Vetter
76e5a89c0a drm/i915: add crtc->enable/disable vfuncs insted of dpms
Because that's what we're essentially calling. This is the first step
in untangling the crtc_helper induced dpms handling mess we have - at
the crtc level we only have 2 states and the magic is just in
selecting which one (and atm there isn't even much magic, but on
recent platforms where not even the crt output has more than 2 states
we could do better).

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:52:00 +02:00
Ben Widawsky
8c3f929b61 drm/i915: Enable some sysfs stuff without CONFIG_PM
The original patch was actually incorrect in stubbing out the sysfs for
l3 parity.
commit 5ab3633d69
Author: Hunt Xu <mhuntxu@gmail.com>
Date:   Sun Jul 1 03:45:07 2012 +0000

    drm/i915: make rc6 in sysfs functions conditional

Unfortunately Hunt didn't respond to my review comments, and Daniel
sucked in the patch again ignoring. Worst of all, I'm too lazy to write
the patch for what I originally wanted, which was to keep rc6 sysfs even
without CONFIG_PM. This simpler patch does enough to enable us to add
more sysfs entries though.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-05 23:26:29 +02:00
Keith Packard
804d74abe2 drm: use drm_compat_ioctl for 32-bit apps
Most of the DRM drivers appear to be missing the .compat_ioctl file
operation entry necessary for 32-bit application compatibility.

This patch  uses drm_compat_ioctl for all drivers which don't have
their own, and which are using drm_ioctl for .unlocked_ioctl.

This leaves drivers/gpu/drm/psb/psb_drv.c unchanged; it has a custom
.unlocked_ioctl and will presumably need a custom .compat_ioctl as
well.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2012-09-06 06:55:02 +10:00
Sedat Dilek
95ca19cf8c drm: udl: usb: Fix recursive Kconfig dependency
In drivers/usb/Kconfig "config USB_ARCH_HAS_HCD" is within "if USB_SUPPORT"
statement.

In drivers/gpu/drm/Kconfig "config DRM_USB" depends on USB_ARCH_HAS_HCD
but selects USB_SUPPORT which leads to the error for udl Kconfig:

$ yes "" | make oldconfig
scripts/kconfig/conf --oldconfig Kconfig
drivers/gpu/drm/udl/Kconfig:1:error: recursive dependency detected!
drivers/gpu/drm/udl/Kconfig:1:  symbol DRM_UDL depends on USB_ARCH_HAS_HCD
drivers/usb/Kconfig:76: symbol USB_ARCH_HAS_HCD depends on USB_SUPPORT
drivers/usb/Kconfig:58: symbol USB_SUPPORT is selected by DRM_USB
drivers/gpu/drm/Kconfig:22:     symbol DRM_USB is selected by DRM_UDL

Fix this by changing from select to depends on USB_SUPPORT in
"config DRM_USB".

This is a follow-up fix to df0b344300
in Dave's drm-next GIT branch.

[ v2: Restore old status, but change from select to depends on USB_SUPPORT ]

Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2012-09-04 18:21:50 +10:00
Jani Nikula
28dcc2d60c drm/i915: do not expose a dysfunctional backlight interface to userspace
Previously intel_panel_setup_backlight() would create a sysfs backlight
interface with max brightness of 1 if it was unable to figure out the max
backlight brightness. This rendered the backlight interface useless.

Do not create a dysfunctional backlight interface to begin with.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 20:42:10 +02:00
Ben Widawsky
8dee3eea3c drm/i915: Never read FORCEWAKE
The same designer from the previous patch has told us to never read
FORCEWAKE. We only do this for the POSTING_READ(), so simply change that
to something within the same cacheline (for no reason in particular
other than it sounds nice). In the _mt case we can leverage
the gtfifodbg check for the POSTING_READ.

This partially reverts
commit 6af2d180f8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jul 26 16:24:50 2012 +0200

    drm/i915: fix forcewake related hangs on snb

v2: commit message, comments about posting read from (Daniel)

Note: vlv forcewake doesn't need any changes for this special
treatment since FORCEWAKE_VLV is in a totally different register
range, and the readback FORCEWAKE_ACK_VLV readback that follows is in
the same range.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Added note.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:28:32 +02:00
Ben Widawsky
057d386061 drm/i915: Change forcewake timeout to 2ms
A designer familiar with the hardware has stated that the forcewake
timeout can theoretically be as high as a little over 1ms. Therefore we
modify our code to use 2ms (appropriate fudge and because we don't want
to round down).

Hopefully this can't prevent spurious timeouts.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Chris Wilson <chris@chris-wilson.oc.uk>
[danvet: again fix conflict with vlv patch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:28:28 +02:00
Ben Widawsky
0cc2764cc4 drm/i915: use cpu_relax() in wait_for_atomic
As part of the advice given to us from the hardware designers regarding
the maximum wait time on the forcewake handshake we need to move from us
granularity to ms granularity. In earlier patches to do this, Jani
noticed that wait_for_us was properly converted to use cpu_relax(), but
wait_for was not.

The issue has existed since the introduction of the macro:
commit 913d8d1100
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Sat Aug 7 11:01:35 2010 +0100

    drm/i915: Ensure that while(INREG()) are bounded (v2)

CC: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.oc.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:21:29 +02:00
Ben Widawsky
b67a4376d5 drm/i915: Extract forcewake ack timeout
It's used all over the place, and we want to be able to play around with
the value, apparently. Note that it doesn't touch other timeouts of the
same value (like gtfifo, and thread C0 wait).

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.oc.uk>
[danvet: fixup conflict with vlv forcewake patches.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:20:43 +02:00
Jani Nikula
5fa7ac9c9c drm/i915: fix sdvo hotplug support check and activation
The sdvo hotplug support check and activation has worked by coincidence for
TMDS0. The boolean value returned by intel_sdvo_supports_hotplug() was
masked with a bit shifted by device number, which also should have been one
of SDVO_OUTPUT_* bits instead. Boolean true masked with 1 shifted by 0 just
happened to match SDVO_OUTPUT_TMDS0...

Get hotplug support as a bit mask, check the correct bits for support, and
use the correct bits for activating hotplug support.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:30 +02:00
Jani Nikula
ff04b35af0 drm/i915: only enable sdvo hotplug irq if needed
Avoid constant wakeups caused by noisy irq lines when we don't even care
about the irq. This should be particularly useful for i945g/gm where the
hotplug has been disabled:

commit 768b107e4b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri May 4 11:29:56 2012 +0200

    drm/i915: disable sdvo hotplug on i945g/gm

v2: While at it, remove the bogus hotplug_active read, and do not mask
hotplug_active[0] before checking whether the irq is needed, per discussion
with Daniel on IRC.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=38442
Tested-by: Dominik Köppl <dominik@devwork.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:29 +02:00
Chris Wilson
a2c7f6fd4d drm/i915: Convert remaining debugfs iterators over rings to for_each_ring()
For code consolidation and future maintainability.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-and-Tested-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:29 +02:00
Daniel Vetter
8a038fd633 drm/i915: differ error message between forcwake timeouts
<ickle> danvet: in the force wake, both DRM_ERRORs have the same string.
<ickle> useful for .txt shrinkage, horrible for debugging

Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:28 +02:00
Daniel Vetter
5ab140a4ac drm/i915: align vlv forcewake with common lore
For some odd reasons, the vlv forcewake code is rather different from
all other platforms, with no clear justification. Adjust things:

- Don't check whether the gt is awake already (and bail out early), we
  need to grab a forcewake anyway. Otherwise the chip might go to
  sleep too early. And this would also screw up our forcewake
  accounting.
- Like all other platforms, check whether the gt has cleared the
  forcewake bit in the _ACK register before setting it again.
- Use _MASKED_BIT_ENABLE/DISABLE macros
- Only use bit0 of the forcewake reg, not all 16 bits.
- check the gtfifodb reg like on all other platforms in _put.
- Drop the POSTING_READs for consistency.

v2: Failure to git add ... again.

v3: Fixup the spelling fail a bit.

Tested-by: "Purushothaman, Vijay A" <vijay.a.purushothaman@intel.com>
Tested-by: "Widawsky, Benjamin" <benjamin.widawsky@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:28 +02:00
Daniel Vetter
be2cde9a6d drm/i915: add a tracepoint for gpu frequency changes
We've had and still have too many issues where the gpu turbo doesn't
quite to what it's supposed to do (or what we want it to do).

Adding a tracepoint to track when the desired gpu frequency changes
should help a lot in characterizing and understanding problematic
workloads.

Also, this should be fairly interesting for power tuning (and
especially noticing when the gpu is stuck in high frequencies, as has
happened in the past) and hence for integration into powertop and
similar tools.

Cc: Arjan van de Ven <arjan@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:27 +02:00
Daniel Vetter
20e4d407fb drm/ips: move drps/ips/ilk related variables into dev_priv->ips
Like with the equivalent change for gen6+ rps state, this helps in
clarifying the code (and in fixing a few places that have fallen through
the cracks in the locking review).

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:27 +02:00
Paulo Zanoni
f39876317a drm/i915: add workarounds to gen7_render_ring_flush
From Bspec, Vol 2a, Section 1.9.3.4 "PIPE_CONTROL", intro section
detailing the various workarounds:

"[DevIVB {W/A}, DevHSW {W/A}]: Pipe_control with CS-stall bit
set must be issued before a pipe-control command that has the State
Cache Invalidate bit set."

Note that public Bspec has different numbering, it's Vol2Part1,
Section 1.10.4.1 "PIPE_CONTROL" there.

There's also a second workaround for the PIPE_CONTROL command itself:

"[DevIVB, DevVLV, DevHSW] {WA}: Every 4th PIPE_CONTROL command, not
counting the PIPE_CONTROL with only read-cache-invalidate bit(s) set,
must have a CS_STALL bit set"

For simplicity we simply set the CS_STALL bit on every pipe_control on
gen7+

Note that this massively helps on some hsw machines, together with the
following patch to unconditionally set the CS_STALL bit on every
pipe_control it prevents a gpu hang every few seconds.

This is a regression that has been introduced in the pipe_control
cleanup:

commit 6c6cf5aa9c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jul 20 18:02:28 2012 +0100

    drm/i915: Only apply the SNB pipe control w/a to gen6

It looks like the massive snb pipe_control workaround also papered
over any issues on ivb and hsw.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: squashed both workarounds together, pimped commit message
with Bsepc citations, regression commit citation and changed the
comment in the code a bit to clarify that we unconditionally set
CS_STALL to avoid being hurt by trying to be clever.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:26 +02:00
Paulo Zanoni
b311150927 drm/i915: add workarounds directly to gen6_render_ring_flush
Since gen 7+ now run the new gen7_render_ring_flush function.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:26 +02:00
Paulo Zanoni
4772eaebcd drm/i915: add gen7_render_ring_flush
For now, just a copy of gen6_render_ring_flush. Different gens have
different workarounds, so we want different functions.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:25 +02:00
Daniel Vetter
85f9e50d81 drm/i915: move i915_get_extra_insdone out of CONFIG_DEBUG_FS block
Otherwise it just won't compile ...

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2012-09-03 18:06:37 +10:00
Jani Nikula
fcbc50da77 drm/i915: only enable sdvo hotplug irq if needed
Avoid constant wakeups caused by noisy irq lines when we don't even care
about the irq. This should be particularly useful for i945g/gm where the
hotplug has been disabled:

commit 768b107e4b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri May 4 11:29:56 2012 +0200

    drm/i915: disable sdvo hotplug on i945g/gm

v2: While at it, remove the bogus hotplug_active read, and do not mask
hotplug_active[0] before checking whether the irq is needed, per discussion
with Daniel on IRC.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=38442
Tested-by: Dominik Köppl <dominik@devwork.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 09:43:36 +02:00
Dave Airlie
c1f05264d8 drm/i915/edp: get the panel delay before powering up
In order to setup the i2c channel, we power up the panel
via ironlake_edp_panel_vdd_on, however it requires
intel_dp->panel_power_up_delay to be initialised,
which hasn't been setup yet.

So move things around so we set the panel power up
values first then init the i2c stuff.

This is one step to fixing the eDP panel in the MBP
from uninitialised state.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 09:43:25 +02:00
Dave Airlie
65983bd605 Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Daniel writes:
"New stuff for -next. Highlights:
- prep patches for the modeset rework. Note that one of those patches
  touches the fb helper in the common drm code.
- hasw hdmi audio support (Wang Xingchao)
- improved instdone dumping for gen7 (Ben)
- unbound tracking and a few follow-up patches from Chris
- dma_buf->begin/end_cpu_access plus fix for drm/udl (Dave)
- improve mmio error reporting for hsw
- prep patch for WQ_NON_REENTRANT removal (Tejun Heo)
"

* 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel: (41 commits)
  drm/i915: Remove __GFP_NO_KSWAPD
  drm/i915: disable rc6 on ilk when vt-d is enabled
  drm/i915: Avoid unbinding due to an interrupted pin_and_fence during execbuffer
  drm/i915: Use new INSTDONE registers (Gen7+)
  drm/i915: Add new INSTDONE registers
  drm/i915: Extract reading INSTDONE
  drm/i915: Use a non-blocking wait for set-to-domain ioctl
  drm/i915: Juggle code order to ease flow of the next patch
  drm/i915: Use cpu relocations if the object is in the GTT but not mappable
  drm/i915: Extract general object init routine
  drm/i915: Protect private gem objects from truncate (such as imported dmabuf)
  drm/i915: Only pwrite through the GTT if there is space in the aperture
  i915: use alloc_ordered_workqueue() instead of explicit UNBOUND w/ max_active = 1
  drm/i915: Find unclaimed MMIO writes.
  drm/i915: Add ERR_INT to gen7 error state
  drm/i915: Cantiga+ cannot handle a hsync front porch of 0
  drm/i915: fix reassignment of variable "intel_dp->DP"
  drm/i915: Try harder to allocate an mmap_offset
  drm/i915: Show pin count in debugfs
  drm/i915: Show (count, size) of purgeable objects in i915_gem_objects
  ...
2012-09-03 12:05:01 +10:00
Dave Airlie
0273de08c4 drm/ast: drop debug level on error printk
This was never an error, drop to a debug print.

Reported-by: Keven Lachance
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-03 07:22:16 +10:00
Dave Airlie
f4fe968b61 Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/nouveau/linux-2.6 into drm-fixes
These two fix the MacBook Pro 2012 Retina display.

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/nouveau/linux-2.6:
  drm/nv50-/gpio: initialise to vbios defaults during init
  drm/nvd0/disp: hopefully fix selection of 6/8bpc mode on DP outputs
2012-09-02 20:22:04 +10:00
Ben Skeggs
991083ba60 drm/nv50-/gpio: initialise to vbios defaults during init
This is required to fix an issue on the Retina MBP where the eDP panel's
AUX channel isn't wired up to the HPD pin for the panel, causing our aux
code to bail out early.

From looking at various traces of the binary driver, it appears NVIDIA do
something very similar on at least all nv50+ chipsets during their
initialisation sequence.  So, hopefully this is safe.

Issue and fix initially tracked down by Ryan Bourgeois on fdo#51971.

Backported fix from reworked nouveau kernel module.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-31 10:51:20 +10:00
Ben Skeggs
a348cd5fd8 drm/nvd0/disp: hopefully fix selection of 6/8bpc mode on DP outputs
I have a very limited number of traces available for DP on NVD9+, but,
these values produce the same as the binary driver on a confirmed 18-bit
eDP panel and a confirmed 24-bit eDP panel (Retina MBP).

It's interesting that the bitfield values also match the MODE_CTRL values
that control the same thing on nv50:nvd9.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-31 10:49:38 +10:00
Paul Menzel
6f33814bd4 drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S
Connecting an ASUS VW222S [1] over VGA a garbled screen is shown with
vertical stripes in the top half.

In commit bc42aabc [2]

        commit bc42aabc6a
        Author: Adam Jackson <ajax@redhat.com>
        Date:   Wed May 23 16:26:54 2012 -0400

            drm/edid/quirks: ViewSonic VA2026w

Adam Jackson added the quirk `EDID_QUIRK_FORCE_REDUCED_BLANKING` which
is also needed for this ASUS monitor.

All log files and output from `xrandr` is included in the referenced
Bugzilla report #17629.

Please note that this monitor only has a VGA (D-Sub) connector [1].

[1] http://www.asus.com/Display/LCD_Monitors/VW222S/
[2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=bc42aabc6a01b92b0f961d65671564e0e1cd7592

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17629
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Cc: <dri-devel@lists.freedesktop.org>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Ian Pilcher <arequipeno@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-30 14:14:12 +10:00
Dave Airlie
c1b51124b6 Merge branch 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Alex writes:

Highlights:
- fix a gart regression on older IGP chips
- more MSAA fixes
- fix a double free in gpu reset code
- modesetting fixes
- trinity dig encoder fix.

* 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix dig encoder selection on DCE61
  drm/radeon: fix double free in radeon_gpu_reset
  drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740
  drm/radeon: rework panel mode setup
  drm/radeon/atom: powergating fixes for DCE6
  drm/radeon/atom: rework DIG modesetting on DCE3+
  drm/radeon: don't disable plls that are in use by other crtcs
  drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700
  drm/radeon: initialize tracked CS state
  drm/radeon: fix reading CB_COLORn_MASK from the CS
2012-08-30 10:35:34 +10:00
Forest Bond
4a68a74ba0 gma500: Consider CRTC initially active.
[this one ideally should make 3.6 - it fixes the very annoying mode setting bug]

This causes the pipe to be forced off prior to initial mode set, which
roughly mirrors the behavior of the i915 driver.  It fixes initial mode
setting on my Intel DN2800MT (Cedarview) board.  Without it, mode
setting triggers an out-of-range error from the monitor for most modes,
but only on initial configuration (i.e. they can be configured
successfully from userspace after that).

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-30 10:33:53 +10:00
Alex Deucher
41fa543770 drm/radeon: fix dig encoder selection on DCE61
Was using the DCE41 code which was wrong. Fixes
blank displays on a number of Trinity systems.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-29 19:57:34 -04:00
Christian König
f54b350d89 drm/radeon: fix double free in radeon_gpu_reset
radeon_ring_restore is freeing the memory for the saved
ring data. We need to remember that, otherwise we try to
restore the ring data again on the next try. Additional
to that it shouldn't try the reset infinitely if we have
saved ring data.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:01 -04:00
Jerome Glisse
4a2b6662c3 drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740
It seems some of those IGP dislike non dma32 page despite what
documentation says. Fix regression since we allowed non dma32
pages. It seems it only affect some revision of those IGP chips
as we don't know which one just force dma32 for all of them.

https://bugzilla.redhat.com/show_bug.cgi?id=785375

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:01 -04:00
Alex Deucher
0ceb996c9e drm/radeon: rework panel mode setup
Adjust the panel mode setup to match the behavior
of the vbios.  Rather than checking for specific
bridge chip ids, just check the eDP configuration register.
This saves extra aux transactions and works across
DP bridge chips without requiring additional per chip
id checking.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:01 -04:00
Alex Deucher
c205b232a6 drm/radeon/atom: powergating fixes for DCE6
Power gating is per crtc pair, but the powergating registers
should be called individually.  The hw handles power up/down
properly.  The pair is powered up if either crtc in the pair
is powered up and the pair is not powered down until both
crtcs in the pair are powered down.  This simplifies
programming and should save additional power as the previous
code never actually power gated the crtc pair.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-29 12:11:01 -04:00
Alex Deucher
8d1af57ae3 drm/radeon/atom: rework DIG modesetting on DCE3+
The ordering is important and the current drm code
wasn't cutting it for modern DIG encoders.  We need
to have information about crtc before setting up
the encoders so I've shifted the ordering a bit.
Probably we'll need a full rework akin to danvet's
recent intel patchs.  This patch fixes numerous
issues with DP bridge chips and makes link training
much more reliable.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-29 12:11:01 -04:00
Alex Deucher
4e58591c89 drm/radeon: don't disable plls that are in use by other crtcs
Some plls are shared for DP.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
2012-08-29 12:11:00 -04:00
Marek Olšák
523885dec1 drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700
Checking of the second colorbuffer was skipped on r700, because
CB_TARGET_MASK was 0xf. With r600, CB_TARGET_MASK is changed to 0xff,
so we must set the number of samples of the second colorbuffer to 1 in order
to pass the CS checker.
The DRM version is bumped, because RESOLVE_BOX is always rejected without this
fix on r600.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:00 -04:00
Marek Olšák
3b5ef597ec drm/radeon: initialize tracked CS state
This should help catch uninitialized registers and reject commands
because of that.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:00 -04:00
Marek Olšák
305a3d204a drm/radeon: fix reading CB_COLORn_MASK from the CS
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:00 -04:00
Dave Airlie
84f720ecba Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Daniel writes:

"Just a few smaller things:
- Fix up a pipe vs. plane confusion from a refactoring, fixes a regression
  from 3.1 (Anhua Xu).
- Fix ivb sprite pixel formats (Vijay).
- Fixup ppgtt pde placement for machines where the Bios artifically limits
  the availbale gtt space in the name of ... product differentiation
  (Chris). This fixes an oops.
- Yet another no_lvds quirk entry."

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard
  drm/i915: Use the correct size of the GTT for placing the per-process entries
  drm/i915: fix color order for BGR formats on IVB
  drm/i915: fix wrong order of parameters in port checking functions
2012-08-29 20:09:23 +10:00
Dave Airlie
f08859a9b0 Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
Ben says its just a single fix to avoid the wrong pcopy units being used.

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nvc0/copy: check PUNITS to determine which copy engines are disabled
2012-08-29 20:05:40 +10:00
Ben Skeggs
14f0458a41 drm/nvc0/copy: check PUNITS to determine which copy engines are disabled
On some Fermi chipsets (NVCE particularly) PCOPY1 doesn't exist.  And if
what I've seen on Kepler is true of Fermi too, chipsets of the same type
can have different PCOPY units available.

This should fix a v3.5 regression reported by a number of people effecting
suspend/resume on NVC8/NVCE chipsets.

Cc: stable@vger.kernel.org [3.5]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-29 13:21:41 +10:00
Sedat Dilek
d7c3b937bd drm/i915: Remove __GFP_NO_KSWAPD
When I pulled-in today's drm-intel-next into linux-next (next-20120824)
I saw this build-breakage:

drivers/gpu/drm/i915/i915_gem.c: In function 'i915_gem_object_get_pages_gtt':
drivers/gpu/drm/i915/i915_gem.c:1778:40: error: '__GFP_NO_KSWAPD' undeclared (first use in this function)
drivers/gpu/drm/i915/i915_gem.c:1778:40: note: each undeclared identifier is reported only once for each function it appears in

This is caused by commit ba099ef165f8 ("mm: remove __GFP_NO_KSWAPD")
and commit b6beae2c2014 ("mm: remove __GFP_NO_KSWAPD fixes") in
linux-next (next-20120824).

Fix this by removing __GFP_NO_KSWAPD from drm/i915 driver.

Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-27 17:11:38 +02:00
Dave Airlie
93bb70e0c0 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
There was some merge conflicts in -next and they weren't so pretty, so
backmerge now to avoid them.

Conflicts:
	drivers/gpu/drm/i915/i915_gem.c
	drivers/gpu/drm/i915/intel_modes.c
2012-08-27 16:22:20 +10:00
Daniel Vetter
cd7988eea5 drm/i915: disable rc6 on ilk when vt-d is enabled
It blows up. And hopefully this is the root-cause of the mysterious
rc6 related hang on ilk. For reference, the commit that enabled rc6 on
ilk again is:

commit 456470eb58
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Aug 8 23:35:40 2012 +0200

    drm/i915: enable rc6 on ilk again

Reported-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-26 20:35:57 +02:00
Chris Wilson
7788a76520 drm/i915: Avoid unbinding due to an interrupted pin_and_fence during execbuffer
If we need to stall in order to complete the pin_and_fence operation
during execbuffer reservation, there is a high likelihood that the
operation will be interrupted by a signal (thanks X!). In order to
simplify the cleanup along that error path, the object was
unconditionally unbound and the error propagated. However, being
interrupted here is far more common than I would like and so we can
strive to avoid the extra work by eliminating the forced unbind.

v2: In discussion over the indecent colour of the new functions and
unwind path, we realised that we can use the new unreserve function to
clean up the code even further.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 21:02:51 +02:00
Ben Widawsky
050ee91f12 drm/i915: Use new INSTDONE registers (Gen7+)
Using the extracted INSTDONE reading, and our new register definitions,
update our hangcheck detection and error collection to use it. This
primarily means changing == to memcmp, and changing = to memcpy.
Hopefully this will give more info on error dump, and provide more
accurate hangcheck detection (both are actually TBD).

Also, remove the reading of instdone1 from the ring error collection
function, and just crap everything in capture_error_state (that could be
split into a separate patch if it wasn't so trivial).

v2: Now assuming i915_get_extra_instdone does the memset we can clean up the
code a bit (Jani)

v3: use ARRAY_SIZE as requested earlier by Jani (didn't change sizeof)
Updated commit msg

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 16:58:36 +02:00
Ben Widawsky
d53bd48459 drm/i915: Add new INSTDONE registers
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 16:58:12 +02:00
Ben Widawsky
bd9854f995 drm/i915: Extract reading INSTDONE
INSTDONE is used in many places, and it varies from generation to
generation. This provides a good reason for us to extract the logic to
read the relevant information.

The patch has no functional change. It's prep for some new stuff.

v2: move the memset inside of i915_get_extra_instdone (Jani)
v3,4: bugs caught by (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 16:57:54 +02:00
Calvin Walton
a51d4ed01e i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard
This board is incorrectly detected as having an LVDS connector,
resulting in the VGA output (the only available output on the board)
showing the console only in the top-left 1024x768 pixels, and an extra
LVDS connector appearing in X.

It's a desktop Mini-ITX board using an Atom D525 CPU with an NM10
chipset.

I've had this board for about a year, but this is the first time I
noticed the issue because I've been running it headless for most of its
life.

Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca>
2012-08-24 14:40:09 +02:00
Chris Wilson
3236f57a01 drm/i915: Use a non-blocking wait for set-to-domain ioctl
The principal use for set-to-domain is for userspace to serialise
operations with a particular buffer, for example to maintain coherency
with a CPU map or to ratelimit its rendering by waiting on all previous
operations before continuing. As such we tend to hold the struct_mutex
for long periods during the synchronisation and so cause contention
issues with other users of the graphics device, even for independent
operations as memory management. An example is the contention between
compiz and X which causes jitter in the display and a drop in peak
throughput.

The ultimate solution would be a set of fine grained locks and lockless
operations, but an intermediate step is to first attempt the
synchronisation for set-to-domain without holding the mutex. This
introduces a number of race conditions, so we limit it use to the ioctl
periphery where we have no dependent state and can safely complete with
a locked synchronisation afterwards.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 11:12:56 +02:00
Chris Wilson
b361237bcc drm/i915: Juggle code order to ease flow of the next patch
Move the wait-for-rendering logic around in the file so that we can
group it together with the subsequent variations. The general goal is to
have the lower level routines clustered together and then the higher
level logic building upon those low level routines that came before.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 11:12:53 +02:00
Chris Wilson
9a0f938bde drm/i915: Use the correct size of the GTT for placing the per-process entries
The current layout is to place the per-process tables at the end of the
GTT. However, this is currently using a hardcoded maximum size for the GTT
and not taking in account limitations imposed by the BIOS. Use the value
for the total number of entries allocated in the table as provided by
the configuration registers.

Reported-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Matthew Garret <mjg@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 11:07:59 +02:00
Alan Cox
6f314ebbaa gma500: Fix frequency detection
If we have a 266MHz part we set core_freq to 0 in several spots

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2012-08-24 17:02:42 +10:00
Jani Nikula
f64c48f1d3 gma500: remove references to drm_display_info raw_edid field
Another reference to raw_edid field of struct drm_display_info was added in
gma500 while the whole field was being removed, causing build
failure. Remove the hopefully last references to raw_edid.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2012-08-24 17:00:37 +10:00
Dave Airlie
ce5fdd6375 gma500: fix incorrect declaration.
this header was incorrect, caused a build failure.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 13:53:49 +10:00
Chris Wilson
504c7267a1 drm/i915: Use cpu relocations if the object is in the GTT but not mappable
This prevents the case of unbinding the object in order to process the
relocations through the GTT and then rebinding it only to then proceed
to use cpu relocations as the object is now in the CPU write domain. By
choosing to use cpu relocations up front, we can therefore avoid the
rebind penalty.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 02:29:16 +02:00
Chris Wilson
0327d6ba99 drm/i915: Extract general object init routine
As we wish to create specialised object constructions in the near
future that share the same basic GEM object struct, export the default
initializer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 02:04:38 +02:00
Chris Wilson
4d6294bf77 drm/i915: Protect private gem objects from truncate (such as imported dmabuf)
If the object has no backing shmemfs filp, then we obviously cannot
perform a truncation operation upon it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 02:04:31 +02:00
Chris Wilson
86a1ee26bb drm/i915: Only pwrite through the GTT if there is space in the aperture
Avoid stalling and waiting for the GPU by checking to see if there is
sufficient inactive space in the aperture for us to bind the buffer
prior to writing through the GTT. If there is inadequate space we will
have to stall waiting for the GPU, and incur overheads moving objects
about. Instead, only incur the clflush overhead on the target object by
writing through shmem.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 02:03:33 +02:00
Sachin Kamat
78b9c3537e drm: Add misssing static storage class specifier in drm_fb_helper.c file
Fixes the following sparse warning:
drivers/gpu/drm/drm_fb_helper.c:239:6: warning:
symbol 'drm_fb_helper_force_kernel_mode' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 10:01:15 +10:00
Sachin Kamat
ea7f7abcbb drm: Add missing static storage class specifier in drm_irq.c file
Fixes the following sparse warning:
drivers/gpu/drm/drm_irq.c:1239:6:
warning: symbol 'drm_handle_vblank_events' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 10:00:56 +10:00
Mark Brown
0227a7fdc2 drm/i2c/ch7006: Convert to dev_pm_ops
The I2C specific suspend and resume functions have been deprecated and
printing a warning on boot for over a year, dev_pm_ops should be used
instead so convert to that.

Also remove the suspend function since all it does is log.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:56:08 +10:00
Sachin Kamat
df0b344300 drm/usb: select USB_SUPPORT in Kconfig
DRM_USB selects USB. However, USB depends on USB_SUPPORT and USB_ARCH_HAS_HCD.
Thus, selecting USB_SUPPORT in Kconfig avoids the following warning
(detected when DisplayLink was selected using exynos4_defconfig):

warning: (MOUSE_APPLETOUCH && MOUSE_BCM5974 && MOUSE_SYNAPTICS_USB && JOYSTICK_XPAD && TABLET_USB_ACECAD && TABLET_USB_AIPTEK && TABLET_USB_HANWANG && TABLET_USB_KBTAB && TABLET_USB_WACOM && TOUCHSCREEN_USB_COMPOSITE && INPUT_ATI_REMOTE2 && INPUT_KEYSPAN_REMOTE && INPUT_POWERMATE && INPUT_YEALINK && INPUT_CM109 && RC_ATI_REMOTE && IR_IMON && IR_MCEUSB && IR_REDRAT3 && IR_STREAMZAP && IR_IGUANA && DRM_USB) selects USB which has unmet direct dependencies (USB_SUPPORT && USB_ARCH_HAS_HCD)

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:54:54 +10:00
Jani Nikula
32285038f5 gma500: remove an unreachable return statement
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:48:48 +10:00
Forest Bond
f835bc0fca gma500: psb_intel_crtc: Drop crtc_enable flag.
This is set when setting DPMS on and off, but it isn't checked anywhere,
so just remove it.

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:43:27 +10:00
Forest Bond
28bbda39b6 gma500: Fix comment mispelling in cdv_intel_limits definition.
Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:43:21 +10:00
Huacai Chen
04cf55e1fa drm: Handle io prot correctly for MIPS.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Hongliang Tao <taohl@lemote.com>
Signed-off-by: Hua Yan <yanh@lemote.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:41:05 +10:00
Jakob Bornecrantz
7c4eaca416 drm: Check for invalid cursor flags
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:38:40 +10:00
Jani Nikula
451023dc32 drm: remove the raw_edid field from struct drm_display_info
Neither the drm core nor any of the drivers really need the raw_edid field
of struct drm_display_info for anything. Instead of being useful, it
creates confusion about who is responsible for freeing the memory it points
to and setting the field to NULL afterwards, leading to memory leaks and
dangling pointers.

Remove the raw_edid field, and fix drivers as necessary.

Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:37:36 +10:00
Jani Nikula
993dcb05e4 drm/ast: fix EDID memory leak
The EDID returned by drm_get_edid() was never freed.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:37:09 +10:00
Jani Nikula
bcd7235cea drm/i915: fix EDID memory leak in SDVO
The EDID returned by drm_get_edid() was never freed.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:37:03 +10:00
Maarten Lankhorst
7d406b1cc0 drm/mgag200: remove unused validate_sequence
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:34:52 +10:00
Maarten Lankhorst
5d77f13c1e drm/cirrus: Remove unused validate_sequence
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:34:46 +10:00
Maarten Lankhorst
a8e2fad3e9 drm/ast: remove unused validate_sequence
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:34:41 +10:00
Alan Cox
f76c0dde78 gma500/cdv: Fix call to cdv_intel_dp_set_m_n
We should be making this call not praying that the values are right.
In addition as noted by Josiah Standing we should be calling this
for eDP as well.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:33:32 +10:00
Laurent Pinchart
4d46259f00 drm: gma500: Kill the GEM glue layer
The private gem_create_mmap_offset() function is now implemented in the
DRM core as drm_gem_create_mmap_offset(). Use it and kill the private
copy.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:30:02 +10:00
Zhao Yakui
9a9f5786fc gma500: Disable the clock gating of display controller to make DP/eDP work well
I don't know why the DP/eDP is affected by the clock gating. But the test
shows that it really fixes the DP/eDP clock issue during enabling DP/eDP.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[Updated to only apply the workaround if the device has DP. We don't want
 to do this on netbooks]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:29:31 +10:00
Zhao Yakui
d112a8163f gma500/cdv: Add eDP support
Introduce the eDP support into the driver.

This has been reworked a bit because kernel driver proper uses encoder/connectors
while the legacy Intel driver uses the old output stuff.

It also diverges on the backlight handling. The legacy Intel driver adds a panel
abstraction based upon the i915 one. It's only really used for backlight bits
and we have a perfectly good backlight abstraction which can extend instead.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[ported to upstream driver, redid backlight abstraction]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:29:25 +10:00
Alan Cox
35659715c4 gma500/cdv: enable the DisplayPort support
This will give the basic support only

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:29:19 +10:00
Alan Cox
37e7b184da gma500/cdv: sync up and add the displayport code to the build
This is mostly just aligning bits of behaviour

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:29:16 +10:00
Alan Cox
220801bdb5 gma500/cdv: add the bits that don't need the new code
Based on bits from Yakui <yakui.zhao@intel.com>

We can import various little bits of code before we plumb it all
in and hopefully this way catch any regressions more easily.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:29:12 +10:00
Alan Cox
8695b61294 gma500: Add the support of display port on CDV
Import the pieces we need in order to do DisplayPort. Don't wire them
up yet as there is work to do to integrate them.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:29:06 +10:00
Zhao Yakui
d66760962d gma500: Program the DPLL lane based on the selected digitial port
Based on the spec, the CRT output doesn't use the lane. And the HDMI B output
uses the Lane0/1 while the HDMI C output uses the Lane 2/3. But currently
it will program all the four lanes for the CRT/HDMI.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[Ported to the in-kernel driver]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:28:58 +10:00
Zhao Yakui
25e9dc6970 gma500: Fix incorrect SR issue when disabling CRTC already in disabled state
Currently when trying to call the DPMS off again for one CRTC with DPMS off,
it will firstly disable the SR and can't enable it again because of the
incorrect check/logic. In such case the self refresh is still disabled
although one CRTC pipe is active. This is wrong.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[Ported to in kernel driver]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:28:53 +10:00
Tejun Heo
53621860c3 i915: use alloc_ordered_workqueue() instead of explicit UNBOUND w/ max_active = 1
This is an equivalent conversion and will ease scheduled removal of
WQ_NON_REENTRANT.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 01:13:53 +02:00
Vijay Purushothaman
5ee369138d drm/i915: fix color order for BGR formats on IVB
This is already fixed for ILK and SNB in the below commit but somehow
IVB is missed.

commit ab2f9df10d
	Author: Jesse Barnes <jbarnes@virtuousgeek.org>
	Date:   Mon Feb 27 12:40:10 2012 -0800

	drm/i915: fix color order for BGR formats on SNB

Had the wrong bits and field definitions.

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-23 11:44:53 +02:00
Xu, Anhua
b70ad58616 drm/i915: fix wrong order of parameters in port checking functions
Wrong order of parameters passed-in when calling hdmi/adpa
/lvds_pipe_enabled(), 2nd and 3rd parameters are reversed.

This bug was indroduced by

commit 1519b9956e
Author: Keith Packard <keithp@keithp.com>
Date:   Sat Aug 6 10:35:34 2011 -0700

    drm/i915: Fix PCH port pipe select in CPT disable paths

The reachable tag for this commit is v3.1-rc1-3-g1519b99

Signed-off-by: Anhua Xu <anhua.xu@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44876
Tested-by: Daniel Schroeder <sec@dschroeder.info>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-23 11:44:53 +02:00
Linus Torvalds
4ff63e47f7 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
 "Intel: edid fixes, power consumption fix, s/r fix, haswell fix

  Radeon: BIOS loading fixes for UEFI and Thunderbolt machines, better
  MSAA validation, lockup timeout fixes, modesetting fixes

  One udl dpms fix, one vmwgfx fix, a couple of trivial core changes.

  There is an export added to ACPI as part of the radeon bios fixes.

  I've also included the fbcon flashing cursor vs deinit race fix, that
  seems the simplest place to start"

Trivial conflict in drivers/video/console/fbcon.c due to me having
already applied the fbcon flashing cursor vs deinit race fix, and Dave
had added a comment in there too.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits)
  fbcon: fix race condition between console lock and cursor timer (v1.1)
  drm: Add missing static storage class specifiers in drm_proc.c file
  drm/udl: dpms off the crtc when disabled.
  drm: Remove two unused fields from struct drm_display_mode
  drm: stop vmgfx driver explosion
  drm/radeon/ss: use num_crtc rather than hardcoded 6
  Revert "drm/radeon: fix bo creation retry path"
  drm/i915: use hsw rps tuning values everywhere on gen6+
  drm/radeon: split ATRM support out from the ATPX handler (v3)
  drm/radeon: convert radeon vfct code to use acpi_get_table_with_size
  ACPI: export symbol acpi_get_table_with_size
  drm/radeon: implement ACPI VFCT vbios fetch (v3)
  drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover later silicon stepping
  drm/radeon: fix checking of MSAA renderbuffers on r600-r700
  drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700
  drm/radeon: init lockup timeout on ring init
  drm/radeon: avoid turning off spread spectrum for used pll
  drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads
  drm/i915: extract connector update from intel_ddc_get_modes() for reuse
  drm/i915: fix hsw uncached pte
  ...
2012-08-22 10:45:13 -07:00
Ben Widawsky
b4c145c1d2 drm/i915: Find unclaimed MMIO writes.
ERR_INT on HSW will display unclaimed MMIO accesses. This can be either
the result of a driver bug writing to an invalid addresses, or the
result of RC6.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-22 18:06:26 +02:00
Ben Widawsky
71e172e8d1 drm/i915: Add ERR_INT to gen7 error state
ERR_INT can generate interrupts. However since most of the conditions seem
quite fatal the patch opts to simply report it in error state instead of
adding more complexity to the interrupt handler for little gain (the
bits are sticky anyway).

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-22 18:05:54 +02:00
Chris Wilson
44f46b4222 drm/i915: Cantiga+ cannot handle a hsync front porch of 0
This addresses WaPruneModeWithIncorrectHsyncOffset.

Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=50236
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-22 17:39:01 +02:00
Sachin Kamat
27fc4f1c0b drm: Add missing static storage class specifiers in drm_proc.c file
Fixes the following sparse warning:
drivers/gpu/drm/drm_proc.c:92:5:
warning: symbol 'drm_proc_create_files' was not declared. Should it be static?
drivers/gpu/drm/drm_proc.c:175:5:
warning: symbol 'drm_proc_remove_files' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-22 09:30:00 +10:00
Dave Airlie
d5c2c20e35 drm/udl: dpms off the crtc when disabled.
This turns off the crtc when its been disabled,
fixes it not turning off properly the whole time.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-22 09:27:47 +10:00
Damien Lespiau
04ccfe77f1 drm: Remove two unused fields from struct drm_display_mode
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-22 09:27:27 +10:00
Alan Cox
f5869a8308 drm: stop vmgfx driver explosion
If you do a page flip with no flags set then event is NULL. If event is
NULL then the vmw_gfx driver likes to go digging into NULL and extracts
NULL->base.file_priv.

On a modern kernel with NULL mapping protection it's just another oops,
without it there are some "intriguing" possibilities.

What it should do is an open question but that for the driver owners to
sort out.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-22 09:26:50 +10:00
Dave Airlie
85119c16b3 Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Daniel writes:

" Nothing too major:
- A few fixes around the edid handling from Jani, also fixing a regression
  in 3.5 due to us using gmbus by default.
- Fixup hsw uncached pte flags.
- Fix suspend/resume crash when using hw contexts, from Ben.
- Try to tune gpu turbo a bit better, seems to help with some oddball
  power regressions."

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: use hsw rps tuning values everywhere on gen6+
  drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads
  drm/i915: extract connector update from intel_ddc_get_modes() for reuse
  drm/i915: fix hsw uncached pte
  drm/i915/contexts: fix list corruption
  drm/i915: fix EDID memory leak in SDVO
2012-08-22 09:19:40 +10:00
Alex Deucher
5317670692 drm/radeon/ss: use num_crtc rather than hardcoded 6
When checking if a pll is in use.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-21 18:52:56 -04:00
Alex Deucher
676bc2e1e4 Revert "drm/radeon: fix bo creation retry path"
This reverts commit d1c7871ddb.

ttm_bo_init() destroys the BO on failure. So this patch makes
the retry path work with freed memory.  This ends up causing
kernel panics when this path is hit.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-21 09:55:01 -04:00
Xu, Anhua
de9932d13c drm/i915: fix reassignment of variable "intel_dp->DP"
In intel_dp_mode_set we OR in the exact same bits twice at the same
spot. Kill one of the redundant assignments.

This little regression was introduced by:
commit 417e822dee
Author: Keith Packard <keithp@keithp.com>
Date:   Tue Nov 1 19:54:11 2011 -0700

    drm/i915: Treat PCH eDP like DP in most places

	PCH eDP has many of the same needs as regular PCH DP connections,
	including the DP_CTl bit settings, the TRANS_DP_CTL register.

The reachable tag for this commit is: v3.1-5461-g417e822

Signed-off-by: Anhua Xu <anhua.xu@intel.com>
[danvet: Improved the commit message somewhat and ensured the diff is
clearer.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-21 14:34:36 +02:00
Chris Wilson
d8cb508669 drm/i915: Try harder to allocate an mmap_offset
Given the persistence of an offset for the lifetime of an object, itis
easy to contemplate how the mmap space becomes badly fragmented to the
point that further allocations fail with ENOSPC. Our only recourse at
this point is to try to purge the objects to release some space and
reattempt the allocation.

References: https://bugs.freedesktop.org/show_bug.cgi?id=39552
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-21 14:34:36 +02:00
Chris Wilson
c110a6d728 drm/i915: Show pin count in debugfs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-21 14:34:35 +02:00
Chris Wilson
b7abb71443 drm/i915: Show (count, size) of purgeable objects in i915_gem_objects
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-21 14:34:23 +02:00
Chris Wilson
c4670ad080 drm/i915: Add some sanity checks to unbound tracking
A pair of universally true checks that just need to be put in the right
place depending on where in the patch sequence you go. Note that
i915_gem_object_put_pages_gtt() already gains the
BUG_ON(obj->gtt_space), but on reflection that needed to migrate to
put_pages().

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-21 14:34:20 +02:00
Chris Wilson
6c085a728c drm/i915: Track unbound pages
When dealing with a working set larger than the GATT, or even the
mappable aperture when touching through the GTT, we end up with evicting
objects only to rebind them at a new offset again later. Moving an
object into and out of the GTT requires clflushing the pages, thus
causing a double-clflush penalty for rebinding.

To avoid having to clflush on rebinding, we can track the pages as they
are evicted from the GTT and only relinquish those pages on memory
pressure.

As usual, if it were not for the handling of out-of-memory condition and
having to manually shrink our own bo caches, it would be a net reduction
of code. Alas.

Note: The patch also contains a few changes to the last-hope
evict_everything logic in i916_gem_execbuffer.c - we no longer try to
only evict the purgeable stuff in a first try (since that's superflous
and only helps in OOM corner-cases, not fragmented-gtt trashing
situations).

Also, the extraction of the get_pages retry loop from bind_to_gtt (and
other callsites) to get_pages should imo have been a separate patch.

v2: Ditch the newly added put_pages (for unbound objects only) in
i915_gem_reset. A quick irc discussion hasn't revealed any important
reason for this, so if we need this, I'd like to have a git blame'able
explanation for it.

v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Split out code movements and rant a bit in the commit message
with a few Notes. Done v2]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-21 14:34:11 +02:00
Linus Torvalds
10c63c9aec More USB patches for 3.6-rc3
Here are 10 more USB patches for 3.6-rc3.  They all fix reported
 problems (build problems for one of them, and easily repeatable oopses
 for the others.)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAlAyjj4ACgkQMUfUDdst+yn8gQCgkNpc92Ux5hBYJIX/AQYoBrTB
 ktAAoLiXxIhVP+D4C42R1VLw9vGeB1QH
 =+8kb
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull more USB patches from Greg Kroah-Hartman:
 "Here are 10 more USB patches for 3.6-rc3.  They all fix reported
  problems (build problems for one of them, and easily repeatable oopses
  for the others.)

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  gpu/mfd/usb: Fix USB randconfig problems
  USB: CDC ACM: Fix NULL pointer dereference
  USB: emi62: remove __devinit* from the struct usb_device_id table
  USB: winbond: remove __devinit* from the struct usb_device_id table
  USB: vt6656: remove __devinit* from the struct usb_device_id table
  USB: rtl8187: remove __devinit* from the struct usb_device_id table
  USB: p54usb: remove __devinit* from the struct usb_device_id table
  USB: spca506: remove __devinit* from the struct usb_device_id table
  USB: jl2005bcd: remove __devinit* from the struct usb_device_id table
  USB: smsusb: remove __devinit* from the struct usb_device_id table
2012-08-20 13:14:22 -07:00
Guenter Roeck
8f057d7bca gpu/mfd/usb: Fix USB randconfig problems
Fix config warning:

warning: ( ... && DRM_USB) selects USB which has unmet direct dependencies
(USB_SUPPORT && USB_ARCH_HAS_HCD)

and build error:
ERROR: "usb_speed_string" [drivers/usb/core/usbcore.ko] undefined!

by adding the missing dependency on USB_ARCH_HAS_HCD to DRM_UDL and DRM_USB.

This exposes:
drivers/video/Kconfig:36:error: recursive dependency detected!
drivers/video/Kconfig:36:       symbol FB is selected by DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:28:     symbol DRM_KMS_HELPER is selected by DRM_UDL
drivers/gpu/drm/udl/Kconfig:1:  symbol DRM_UDL depends on USB_ARCH_HAS_HCD
drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI
drivers/usb/Kconfig:16: symbol USB_ARCH_HAS_OHCI depends on I2C
drivers/i2c/Kconfig:5:  symbol I2C is selected by FB_DDC
drivers/video/Kconfig:86:       symbol FB_DDC is selected by FB_CYBER2000_DDC
drivers/video/Kconfig:385:      symbol FB_CYBER2000_DDC depends on FB_CYBER2000
drivers/video/Kconfig:373:      symbol FB_CYBER2000 depends on FB

which is due to drivers/usb/Kconfig:
config USB_ARCH_HAS_OHCI
	...
	default y if ARCH_PNX4008 && I2C

Fix by dropping I2C from the above dependency; logic is that this is not a
platform dependency but a configuration dependency: the _architecture_ still
supports USB even is I2C is not selected.

This exposes:
drivers/video/Kconfig:36:error: recursive dependency detected!
drivers/video/Kconfig:36:       symbol FB is selected by DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:28:     symbol DRM_KMS_HELPER is selected by DRM_UDL
drivers/gpu/drm/udl/Kconfig:1:  symbol DRM_UDL depends on USB_ARCH_HAS_HCD
drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI
drivers/usb/Kconfig:17: symbol USB_ARCH_HAS_OHCI depends on MFD_TC6393XB
drivers/mfd/Kconfig:396:        symbol MFD_TC6393XB depends on GPIOLIB
drivers/gpio/Kconfig:35:        symbol GPIOLIB is selected by FB_VIA
drivers/video/Kconfig:1560:     symbol FB_VIA depends on FB

which can be fixed by having MFD_TC6393XB select GPIOLIB instead of depending on
it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-20 11:52:41 -07:00
Daniel Vetter
1ee9ae3244 drm/i915: use hsw rps tuning values everywhere on gen6+
James Bottomley reported [1] a massive power regression, due to the
enabling of semaphores by default in 3.5. A workaround for him is to
again disable semaphores. And indeed, his system has a very hard time
to enter rc6 with semaphores enabled.

Ben Widawsky run around with a kill-a-watt a lot and noticed:
- There are indeed a few rare systems that seem to have a hard time
  entering rc6 when desktop-idle.
- One machine, The Indestructible Toshiba regressed in this behaviour
  between 3.5 and 3.6 in a merge commit! So rc6 behaviour with the
  current setting seems to be highly timing dependent and not robust
  at all.
- The behaviour James reported wrt semaphores seems to be a freak
  timing thing that only happens on his specific machine, confirming
  that enabling semaphores shouldn't reduce rc6 residency.

Now furthermore the Google ChromeOS guys reported [2] a while ago that
at least on some machines a simply a blinking cursor can keep the gpu
turbo at the highest frequency. This is because the current rps limits
used on snb/ivb are highly asymmetric.

On the theory that gpu turbo and rc6 tuning values are related, we've
tried whether the much saner looking (since much less asymmetric) rps
tuning values used for hsw would also help entering rc6 more robustly.

And it seems to mostly work, and we don't really have the resources to
through-roughly tune things in any better way: The values from the
ChromeOS ppl seem to fare a bit worse for James' machine, so I guess
we better stick with something vpg (the gpu hw/windows group)
provided, hoping that they've done their jobs.

Reference[1]: http://lists.freedesktop.org/archives/dri-devel/2012-July/025675.html
Reference[2]: http://lists.freedesktop.org/archives/intel-gfx/2012-July/018692.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53393
Tested-by: Ben Widawsky <ben@bwidawsk.net>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 20:49:19 +02:00
Alex Deucher
c61e277587 drm/radeon: split ATRM support out from the ATPX handler (v3)
There are systems that use ATRM, but not ATPX.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41265

V2: fix #ifdefs as per Greg's comments
V3: fix it harder

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-20 11:13:05 -04:00
Alex Deucher
7c3906d04a drm/radeon: convert radeon vfct code to use acpi_get_table_with_size
Allows us to verify the table size.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-20 11:13:05 -04:00
David Lamparter
268ba0a99f drm/radeon: implement ACPI VFCT vbios fetch (v3)
This is required for pure UEFI systems.  The vbios is stored
in ACPI rather than at the legacy vga location.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=26891

V2: fix #ifdefs as per Greg's comments
V3: fix it harder

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
2012-08-20 11:09:50 -04:00
Tvrtko Ursulin
52e9b39d9a drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover later silicon stepping
There is a more recent APU stepping with a new PCI ID
shipping in the same board by Fujitsu which needs the
same quirk to correctly mark the back plane connectors.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-20 11:09:50 -04:00
Marek Olšák
fcdeefe4df drm/radeon: fix checking of MSAA renderbuffers on r600-r700
The MSAA checking was mostly unimplemented on r600-r700. The userspace
submits GPU commands and the kernel driver computes how much memory
the GPU will access and checks if it's all within buffer bounds the
userspace allocated. This patch fixes the computations of the size of
MSAA surfaces in memory.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-20 11:09:49 -04:00
Marek Olšák
c116cc9496 drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700
MSAA is impossible without them.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-20 11:09:49 -04:00
Christian König
48c0ac9911 drm/radeon: init lockup timeout on ring init
Reset the lockup timeout on ring (re-)initialisation.

Otherwise we get error messages like this on gpu resets:
[ 1559.949177] radeon 0000:01:00.0: GPU lockup CP stall for more than 1482270msec

Signed-off-by: Christian König <deathsimple@vodafone.de>
cc: stable@vger.kernel.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
2012-08-20 11:09:48 -04:00
Jerome Glisse
5efcc76c13 drm/radeon: avoid turning off spread spectrum for used pll
If spread spectrum is enabled and in use for a given pll we
should not turn it off as it will lead to turning off display
for crtc that use the pll (this behavior was observed on chelsea
edp).

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-20 11:09:48 -04:00
Daniel Vetter
225067eedf drm/i915: move functions around
Prep work to make Chris Wilson's unbound tracking patch a bit easier
to read. Alas, I'd have preferred that moving the page allocation
retry loop from bind to get_pages would have been a separate patch,
too. But that looks like real work ;-)

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 10:59:41 +02:00
Seth Forshee
e99eac5e4e vga_switcheroo: Don't require handler init callback
This callback is a no-op in nouveau, and the upcoming apple-gmux
switcheroo support won't require it either. Rather than forcing drivers
to stub it out, just make it optional and remove the callback from
nouveau.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-08-17 17:34:41 -04:00
Seth Forshee
36704c0c4c vga_switcheroo: Remove assumptions about registration/unregistration ordering
vga_switcheroo assumes that the handler will be registered before the
last client, otherwise switching will not be enabled. Likewise it's
assumed that the handler will not be unregistered without at least one
client also being unregistered, otherwise switching will remain enabled
despite no longer having a handler. These assumptions cannot be enforced
if the handler is in a separate driver from both clients, as with the
gmux found in Apple laptops. Remove this assumption.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-08-17 17:34:41 -04:00
Wang Xingchao
83358c8586 drm/i915: Haswell HDMI audio initialization
Added new haswell_write_eld() to initialize Haswell HDMI audio registers
to generate an unsolicited response to the audio controller driver to
indicate that the controller sequence should start.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:07 +02:00
Dave Airlie
32ecd24264 drm/udl: call begin/end cpu access at more appropriate time
We need to call these before we transfer the damaged areas to the device
not before/after we setup the long lived vmaps.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:07 +02:00
Dave Airlie
ec6f1bb90c drm/i915: implement dma buf begin_cpu_access (v2)
In order for udl vmap to work properly, we need to push the object
into the CPU domain before we start copying the data to the USB device.

This along with the udl change avoids userspace explicit mapping to
be used.

v2: add a flag for userspace to query to know if Intel kernel driver can
deal with the vmap flushing properly. In theory udl would need a flag also,
but I intend to push the patches very close to each other and other drivers
should do the right thing from the start.

I've added a test to my intel-gpu-tools prime branch, however testing
this is a bit messy since the only way to get udl to vmap is to rendering
something. I've tested this with real code as well to make sure it works.

Signed-off-by: Dave Airlie <airlied@redhat.com>
[danvet: resolved conflict, which required reallocating the PARAM
number to 21.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:06 +02:00
Keith Packard
0826874a66 drm/i915: Allow VGA on CRTC 2
This is left over from the old PLL sharing code and isn't useful now
that PLLs are shared when possible.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:06 +02:00
Damien Lespiau
523313092a drm/i915: Don't hardcode the number of pipes in the error state dump
New-ish devices have 3 pipes, so let's not just hardcode 2 but use the
for_each_pipe() macro and make struct intel_display_error_state is big
enough.

V2: Also add the number of pipes emitted (Chris Wilson)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:05 +02:00
Daniel Vetter
33faad195e drm/fb-helper: don't clobber output routing in setup_crtcs
Yet again the too close relationship between the fb helper and the
crtc helper code strikes. This time around the fb helper resets all
encoder->crtc pointers to NULL before starting to set up it's own
mode. Which is total bullocks, because this will clobber the existing
output routing, which the new drm/i915 code depends upon to be
absolutely correct.

The crtc helper itself doesn't really care about that, since it
disables unused encoders in a rather roundabout way anyway.

Two places call drm_setup_crts:

- For the initial fb config. I've auditted all current drivers, and
  they all allocate their encoders with kzalloc. So there's no need to
  clear encoder->crtc once more.

- When processing hotplug events while showing the fb console. This
  one is a bit more tricky, but both the crtc helper code and the new
  drm/i915 modeset code disable encoders if their crtc is changed and
  that encoder isn't part of the new config. Also, both disable any
  disconnected outputs, too.

  Which only leaves encoders that are on, connected, but for some odd
  reason the fb helper code doesn't want to use. That would be a bug
  in the fb configuration selector, since it tries to light up as many
  outputs as possible.

v2: Kill the now unused encoders variable.

Acked-by: Dave Airlie <airlied@gmail.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:05 +02:00
Wang Xingchao
9b138a8367 drm/i915: ironlake_write_eld code cleanup
Use _PIPE macro to get correct register definition for IBX/CPT, discard
old variable "i" way.

Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Added the DIP_PORT_SEL #define from a preceeding patch in the
series that needs more work.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:04 +02:00
Wang Xingchao
4f07854dd7 drm/i915: write eld info for HDMI audio
HDMI audio related registers will be configured in write_eld callback.

Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:04 +02:00
Wang Xingchao
9a78b6cce5 drm/i915: HSW audio registers definition
Add hsw audio registers definition

Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:03 +02:00
Daniel Vetter
88cefb6c60 drm/i915: extract ironlake_fdi_pll_disable
Simply to make the ilk+ crtc disable path clearer and more symmetric
with the enable function.

Also switch to intel_crtc for the enable function.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:03 +02:00
Daniel Vetter
5d985ac81a drm/i915: kill a few unused things in dev_priv
... and move a few others only used by i915_dma.c into the dri1
dungeon.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:03 +02:00
Daniel Vetter
fac3274c4e drm/i915: simplify dvo dpms interface
All dvo drivers only support 2 dpms states, and our dvo driver
even switches of the dvo port for anything else than DPMS_ON. Hence
ditch this complexity and simply use bool enable.

While reading through this code I've noticed that the mode_set
function of ch7017 is a bit peculiar - it disable the lvds again, even
though the crtc helper code should have done that ... This might be to
work around an issue at driver load, we pretty much ignore the hw
state when taking over.

v2: Also do the conversion for the new ns2501 driver.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:02 +02:00
Daniel Vetter
d2434ab7fb drm/i915: drop intel_encoder argument to load_detect_pipe functions
Since it's redundant - we can get the attached encoder in the
functions themselves.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:02 +02:00
Daniel Vetter
24218aacac drm/i915: prepare load-detect pipe code for dpms changes
A few things need adjustement:
- Change the dpms state by calling the dpms connector function and
  not some crtc helper internal callbacks. Otherwise this will break
  once we switch to our own dpms handling.
- Instead of tracking and restoring intel_crtc->dpms_mode use the
  connector's dpms variable - the former relies on the dpms compuation
  rules used by the crtc helper. And it would break when the encoder
  is cloned and the other output has a different dpms state. But luckily
  no one is crazy enough for that.
- Properly clear the connector -> encoder -> crtc linking, even when
  failing (note that the crtc helper removes the encoder -> crtc link
  in disabled_unused_functions for us).

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:01 +02:00
Daniel Vetter
6306cb4f80 drm/i915: rip out the overlay pipe A workaround
Now that all affected i830M systems have the pipe A quirk set,
we don't need to do any special dances in the overlay code any
longer. And reading through the code I'm rather dubios that it
actually does what it claims to do ...

As a nice benefit this rips out a users of the crtc helper dpms
callback.

v2: As suggested by Chris Wilson, replace the code by an appropriate
WARN to ensure that the pipe A is indeed running.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:01 +02:00
Daniel Vetter
a37b9b349e drm/i915/ns2501: kill pll A enabling hack
With the pipe A quirk properly fixed up for i830M, this shouldn't be
required any longer.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:00 +02:00
Daniel Vetter
dcdaed6eae drm/i915: add missing gen2 pipe A quirk entries
For some odd reason we've missed i830 and a i855 variant. Also
kill the two now redundant i830 entries.

v2: Don't add the missing 855 id to the pipe A quirk list, we seem to
lack justification for it.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:00 +02:00
Xu, Anhua
e9a851ed63 drm/i915: fix wrong order of parameters in port checking functions
Wrong order of parameters passed-in when calling hdmi/adpa
/lvds_pipe_enabled(), 2nd and 3rd parameters are reversed.

This bug was indroduced by

commit 1519b9956e
Author: Keith Packard <keithp@keithp.com>
Date:   Sat Aug 6 10:35:34 2011 -0700

    drm/i915: Fix PCH port pipe select in CPT disable paths

The reachable tag for this commit is v3.1-rc1-3-g1519b99

Signed-off-by: Anhua Xu <anhua.xu@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 09:22:39 +02:00
Jani Nikula
f1a2f5b7c5 drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads
GMBUS was enabled over bit-banging as the default in commits:

commit c3dfefa0a6
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Feb 14 22:37:25 2012 +0100

    drm/i915: reenable gmbus on gen3+ again

and

commit 0fb3f969c8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Mar 2 19:38:30 2012 +0100

    drm/i915: enable gmbus on gen2

Unfortunately, GMBUS seems to fail on some CRT displays. Add a bit-banging
fallback to CRT EDID reads.

LKML-Reference: <201207251020.47637.maciej.rutecki@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45881
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Alex Ferrando <alferpal@gmail.com>
Cc: stable@vger.kernel.org (for 3.4+3.5)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 09:21:36 +02:00
Jani Nikula
4eab813664 drm/i915: extract connector update from intel_ddc_get_modes() for reuse
Refactor the connector update part of intel_ddc_get_modes() into a separate
intel_connector_update_modes() function for reuse. No functional changes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45881
Tested-by: Alex Ferrando <alferpal@gmail.com>
Cc: stable@vger.kernel.org (for 3.4+3.5)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 09:21:35 +02:00
Daniel Vetter
a843af186c drm/i915: fix hsw uncached pte
They've changed it ... for no apparent reason. Meh.

V2: remove unused 'is_hsw' field.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 09:21:35 +02:00
Ben Widawsky
b6c7488df6 drm/i915/contexts: fix list corruption
After reset we unconditionally reinitialize lists. If the context switch
hasn't yet completed before the suspend, the default context object will
end up on lists that are going to go away when we resume.

The patch forces the context switch to be synchronous before suspend
assuring that the active/inactive tracking is correct at the time of
resume.

References: https://bugs.freedesktop.org/show_bug.cgi?id=52429
Tested-by: Guang A Yang <guang.a.yang@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 09:21:34 +02:00
Jani Nikula
38ab8a2009 drm/i915: fix EDID memory leak in SDVO
The EDID returned by drm_get_edid() was never freed.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 09:21:34 +02:00
Daniel Vetter
a22ddff8be Linux 3.6-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQLWtvAAoJEHm+PkMAQRiG/DYH+wd0FqfEuYkYk4KPyAPuhKpX
 zX7HYfLvyJE/ZYIdrhjq1E6Xm2KNr7gtX7/Rdzi2W38M9sjbYzwG1UGIw51qnxWy
 yZJH9BGkfyQgQPeuDGohfB6DkDy2JWr2eqMDvakjOwgBsIzji0PQD/f3UvndhtUa
 c+tTj/kjavHE1Yr2Wy6OnRZz3Uc0hIMn/Q0JqtbCs3LUgEV1KA4OEAe56XNz4Ku4
 WE+FFaGFPvtriQsQON+ohPS5IC8jzQGK/0vbrJ4lWjFnZy4gvZXnborTOwD0WSQG
 fbsNuxp1AaM2/pqfMwXm1w0ADvwOITHNiwwXf9id6DoK81QwTFpUdvKpn6yB6gQ=
 =rurr
 -----END PGP SIGNATURE-----

Merge tag 'v3.6-rc2' into drm-intel-next

Backmerge Linux 3.6-rc2 to resolve a few funny conflicts before we put
even more madness on top:

- drivers/gpu/drm/i915/i915_irq.c: Just a spurious WARN removed in
  -fixes, that has been changed in a variable-rename in -next, too.

- drivers/gpu/drm/i915/intel_ringbuffer.c: -next remove scratch_addr
  (since all their users have been extracted in another fucntion),
  -fixes added another user for a hw workaroudn.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 09:01:08 +02:00
Dave Airlie
2e26c73a1e Merge branch 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
* 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6:
  drm/nv86/fifo: suspend fix
  drm/nouveau: disable copy engine on NVAF
  nouveau: fixup scanout enable in nvc0_pm
  drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry
  drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate
  drm/nve0/fifo: add support for the flip completion swmthd
2012-08-15 20:31:22 +10:00
Dave Airlie
a389b6a156 Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Daniel Vetter writes:

"A few important fixers:
- fix various lvds backlight issues, regressed in 3.6 (Takashi Iwai)
- make the retina mbp work (ignore bogus edp bpc value in vbt)
- fix a gmbus regression introduced in (iirc) 3.4 (Jani Nikula)
- fix an edp panel power sequence regression, fixes the new macbook air
- apply the tlb invalidate w/a

Otherwise we still have another gmbus regression (patches are awaiting
tested-bys) and there's something odd going with some rare systems not
entering rc6 often enough (and hence blowing through too much power).  It
seems to be a timing-related issue and can be mitigated by frobbing the
magic tuning parameters. We're still working on that one. Also, we still
have some fallout from the hw context support, but you can only hit that
with mesa master."

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Apply post-sync write for pipe control invalidates
  drm/i915: reorder edp disabling to fix ivb MacBook Air
  drm/i915: ensure i2c adapter is all set before adding it
  drm/i915: ignore eDP bpc settings from vbt
  drm/i915: Fix blank panel at reopening lid
2012-08-15 20:27:51 +10:00
Chris Wilson
7d54a90428 drm/i915: Apply post-sync write for pipe control invalidates
When invalidating the TLBs it is documentated as requiring a post-sync
write. Failure to do so seems to result in a GPU hang.

Exposure to this hang on IVB seems to be a result of removing the extra
stalls required for SNB pipecontrol workarounds:

commit 6c6cf5aa9c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jul 20 18:02:28 2012 +0100

    drm/i915: Only apply the SNB pipe control w/a to gen6

Note: Manually switch the pipe_control cmd to 4 dwords to avoid a
(silent) functional conflict with -next. This way will get a loud (but
conflict with next (since the scratch_addr has been deleted there).

Reported-and-tested-by: yex.tian@intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53322
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: added note about merge conflict with -next.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14 09:47:45 +02:00
Daniel Vetter
35a38556d9 drm/i915: reorder edp disabling to fix ivb MacBook Air
eDP is tons of fun. It turns out that at least the new MacBook Air 5,1
model absolutely doesn't like the new force vdd dance we've introduced
in

commit 6cb49835da
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun May 20 17:14:50 2012 +0200

    drm/i915: enable vdd when switching off the eDP panel

But that patch also tried to fix some neat edp sequence issue with the
force_vdd timings. Closer inspection reveals that we've raised
force_vdd only to do the aux channel communication dp_sink_dpms. If we
move the edp_panel_off below that, we don't need any force_vdd for the
disable sequence, which makes the Air happy.

Unfortunately the reporter of the original bug that the above commit
fixed is travelling, so we can't test whether this regresses things.
But my theory is that since we don't check for any power-off ->
force_vdd-on delays in edp_panel_vdd_on, this was the actual
root-cause of this failure. With that force_vdd dance completely
eliminated, I'm hopeful the original bug stays fixed, too.

For reference the old bug, which hopefully doesn't get broken by this:

https://bugzilla.kernel.org/show_bug.cgi?id=43163

In any case, regression fixers win over plain bugfixes, so this needs
to go in asap.

v2: The crucial pieces seems to be to clear the force_vdd flag
uncoditionally, too, in edp_panel_off. Looks like this is left behind
by the firmware somehow.

v3: The Apple firmware seems to switch off the panel on it's own, hence
we still need to keep force_vdd on, but properly clear it when switching
the panel off.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671
Tested-by: Roberto Romer <sildurin@gmail.com>
Tested-by: Daniel Wagner <wagi@monom.org>
Tested-by: Keith Packard <keithp@keithp.com>
Cc: stable@vger.kernel.org
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14 09:38:25 +02:00
Maxim Levitsky
2064db725c drm/nv86/fifo: suspend fix
This fix is a backport from the reworked nouveau driver.  It masks off the
engines we're not expecting to use before attempting a channel kickoff.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14 09:36:53 +10:00
Henrik Rydberg
fe0aac129c drm/nouveau: disable copy engine on NVAF
The copy engine exhibits random memory corruption in at least one case, the
GeForce 320M (nv50, 0xaf) in the MacBookAir3,1.

This patch omits creating the engine for the specific chipset, falling back
to M2MF, which kills the symptoms.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14 09:36:52 +10:00
Maarten Lankhorst
44b9f44e11 nouveau: fixup scanout enable in nvc0_pm
Fixes screen being black after changing performance level.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: stable@vger.kernel.org [3.5+]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14 09:36:51 +10:00
Ben Skeggs
3d7a1da2c2 drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry
At least partially fixes DP output detection on W530.  Not sure if more
issues remain, or if my adaptor is just behaving weirdly (it does that
sometimes).

In any case, this patch is necessary.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14 09:36:50 +10:00
Christoph Bumiller
af5e7d84b0 drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
2012-08-14 09:36:24 +10:00
Jani Nikula
cee25168e9 drm/i915: ensure i2c adapter is all set before adding it
i2c_add_adapter() may do i2c transfers on the bus to detect supported
devices. Therefore the adapter needs to be all set before adding it. This
was not the case for the bit-banging fallback, resulting in an oops if the
device detection GMBUS transfers timed out. Fix the issue by calling
i2c_add_adapter() only after intel_gpio_setup().

LKML-Reference: <5021F00B.7000503@ionic.de>
Tested-by: Mihai Moldovan <ionic@ionic.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-13 19:04:24 +02:00
Dmitrii Cherkasov
f59abbf286 drm/radeon: fix typo in function header comment
Signed-off-by: Dmitrii Cherkasov <DCherkasov@luxsoft.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13 10:53:29 -04:00
Marek Olšák
6759a0a7a0 drm/radeon/kms: implement timestamp userspace query (v2)
Returns a snapshot of the GPU clock counter.  Needed
for certain OpenGL extensions.

v2: agd5f
- address Jerome's comments
- add function documentation

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13 10:50:56 -04:00
Marek Olšák
b51ad12a36 drm/radeon/kms: add MSAA texture support for r600-evergreen
Most of the checking seems to be in place already. As you can see,
log2(number of samples) resides in LAST_LEVEL.

This is required for MSAA support (namely for depth-stencil resolve and
blitting between MSAA resources).

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13 10:50:56 -04:00
Marek Olšák
f00245f182 drm/radeon/kms: reorder code in r600_check_texture_resource
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13 10:50:55 -04:00
Jerome Glisse
e43b5ec05a drm/radeon: fence virtual address and free it once idle v4
Virtual address need to be fenced to know when we can safely remove it.
This patch also properly clear the pagetable. Previously it was
serouisly broken.

Kernel 3.5/3.4 need a similar patch but adapted for difference in mutex locking.

v2: For to update pagetable when unbinding bo (don't bailout if
    bo_va->valid is true).
v3: Add kernel 3.5/3.4 comment.
v4: Fix compilation warnings.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13 10:50:55 -04:00
Alex Deucher
69b62ad8a4 drm/radeon: fix some missing parens in asic macros
Better safe than sorry.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-13 10:50:54 -04:00
Alex Deucher
ecd67955fd drm/radeon: fix ordering in pll picking on dce4+
No functional change, but re-order the cases so they
evaluate properly due to the way the DCE macros work.

Noticed by kallisti5 on IRC.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13 10:50:53 -04:00
Jerome Glisse
81ee8fb6b5 drm/radeon: do not reenable crtc after moving vram start address
It seems we can not update the crtc scanout address. After disabling
crtc, update to base address do not take effect after crtc being
reenable leading to at least frame being scanout from the old crtc
base address. Disabling crtc display request lead to same behavior.

So after changing the vram address if we don't keep crtc disabled
we will have the GPU trying to read some random system memory address
with some iommu this will broke the crtc engine and will lead to
broken display and iommu error message.

So to avoid this, disable crtc. For flicker less boot we will need
to avoid moving the vram start address.

This patch should also fix :

https://bugs.freedesktop.org/show_bug.cgi?id=42373

Cc: <stable@vger.kernel.org>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
2012-08-13 10:50:52 -04:00
Alex Deucher
5b23c9045a drm/radeon: fix bank tiling parameters on cayman
Handle the 16 bank case.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-13 10:50:52 -04:00
Alex Deucher
c8d15edc17 drm/radeon: fix bank tiling parameters on evergreen
Handle the 16 bank case.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-13 10:50:51 -04:00
Christian König
dca571a6a4 drm/radeon: fix bank tiling parameters on SI
The sixteen bank case wasn't handled here, leading to GPU
crashes because of userspace miscalculation.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13 10:50:50 -04:00
Alex Deucher
6c0ae2ab85 drm/radeon: properly handle crtc powergating
Need to make sure the crtc is gated on before modesetting.
Explicitly gate the crtc on in prepare() and set a flag
so that the dpms functions don't gate it off during
mode set.

Noticed by sylware on IRC.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-13 10:50:50 -04:00
Alex Deucher
3838f46e36 drm/radeon: properly handle SS overrides on TN (v2)
The IntegratedSystemInfo table changed versions
on TN.  Update the SS override lookup to handle it.

v2: fix copy-paste typo.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13 10:50:49 -04:00
Alex Deucher
f4254a2bb4 drm/radeon/dce4+: set a more reasonable cursor watermark
Set a more reasonable default cursor watermark. The
recommended default value is 4.  This should reduce
urgency requests to the MC form the display hw.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13 10:50:49 -04:00
Alex Deucher
3d61bd4213 drm/radeon: fix handling for ddc type 5 on combios
When ddc type is 5, need to look up the i2c channel
in the i2c table.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13 10:50:48 -04:00
Daniel Vetter
20d5a540e5 drm/i915: don't grab dev->struct_mutex for userspace forcewak
Since forcewake is now protected by a spinlock, we don't need to grab
dev->struct_mutex any more. This way we can also get rid of a stale
comment, noticed by Ben Widawsky while reviewing some locking changes.

v2: Kill the unused variable ret, noticed by Fengguang Wu.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-12 11:28:49 +02:00
Daniel Vetter
4344b813f1 drm/i915: ignore eDP bpc settings from vbt
This has originally been introduced to not oversubscribe the dp links
in

commit 885a5fb5b1
Author: Zhenyu Wang <zhenyuw@linux.intel.com>
Date:   Tue Jan 12 05:38:31 2010 +0800

    drm/i915: fix pixel color depth setting on eDP

Since then we've fixed up the dp link bandwidth calculation code and
should now automatically fall back to 6bpc dithering. So this is
unnecessary.

Furthermore it seems to break the new MacbookPro with retina display,
hence let's just rip this out.

Reported-by: Benoit Gschwind <gschwind@gnu-log.net>
Cc: Benoit Gschwind <gschwind@gnu-log.net>
Cc: Francois Rigaut <frigaut@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Tested-by: Bernhard Froemel <froemel at vmars tuwien.ac.at>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

--

Testing feedback highgly welcome, and thanks for Benoit for finding
out that the bpc computations are busted.
-Daniel
2012-08-11 21:42:52 +02:00
Takashi Iwai
770c12312a drm/i915: Fix blank panel at reopening lid
When you reopen the lid on a laptop with PCH, the panel suddenly goes
blank sometimes.  It seems because BLC_PWM_CPU_CTL register is cleared
to zero when BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1 registers are
enabled.

This patch fixes the problem by moving the call of the function setting
BLC_PWM_CPU_CTL after enabling other two registers.

Reported-and-tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-11 21:15:16 +02:00
Paulo Zanoni
126e9be816 drm/i915: try harder to find WR PLL clock settings
If we don't find the exact refresh rate, go with the next one. This
makes some modes work for me. They won't have the best settings, but
will at least have something. Just returning from this function when
we don't find the perfect settings does not help us at all.

Version 2:
  - Remove duplicate lines on the clock table.
  - Add back debug message with refresh, p, n2 and r2.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-10 18:35:28 +02:00
Paulo Zanoni
228d3e367c drm/i915: use the correct encoder type when comparing
- intel_encoder->type is INTEL_OUTPUT_SOMETHING
  - drm_encoder->encoder_type is DRM_MODE_ENCODER_SOMETHING

Here we're using intel_encoder, so compare the oranges against
oranges. While at it, rename the variable to "intel_encoder" so we
keep our naming standards used everywhere.

Luckily this was not a bug because both DRM_MODE_ENCODER_DAC and
INTEL_OUTPUT_ANALOG are defined as 1. This is the only case where the
drm definition matches the intel definition.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-10 18:34:05 +02:00
Dave Airlie
9830605d4c drm/mgag200: fix G200ER pll picking algorithm
The original code was misported from the X driver,

a) an int went to unsigned int, breaking the downward counting testm code
b) the port did the vco/computed clock bits completely wrong.

This fixes an infinite loop on modprobe on some Dell servers with the G200ER
chipset variant.

Found in internal testing.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-10 20:31:37 +10:00
Alexey Khoroshilov
f7b83b908f drm/edid: Fix potential memory leak in edid_load()
Do not leak memory by updating pointer with potentially
NULL realloc return value.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-10 20:30:04 +10:00
Chris Wilson
b2eadbc85b drm/i915: Lazily apply the SNB+ seqno w/a
Avoid the forcewake overhead when simply retiring requests, as often the
last seen seqno is good enough to satisfy the retirment process and will
be promptly re-run in any case. Only ensure that we force the coherent
seqno read when we are explicitly waiting upon a completion event to be
sure that none go missing, and also for when we are reporting seqno
values in case of error or debugging.

This greatly reduces the load for userspace using the busy-ioctl to
track active buffers, for instance halving the CPU used by X in pushing
the pixels from a software render (flash). The effect will be even more
magnified with userptr and so providing a zero-copy upload path in that
instance, or in similar instances where X is simply compositing DRI
buffers.

v2: Reverse the polarity of the tachyon stream. Daniel suggested that
'force' was too generic for the parameter name and that 'lazy_coherency'
better encapsulated the semantics of it being an optimization and its
purpose. Also notice that gen6_get_seqno() is only used by gen6/7
chipsets and so the test for IS_GEN6 || IS_GEN7 is redundant in that
function.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-10 11:11:32 +02:00
Daniel Vetter
456470eb58 drm/i915: enable rc6 on ilk again
I have the faint hope that the total absence of any locking for the
rps code wasn't too good an idea and could very well have caused some
rc6 related regressions.

Unfortunately we've never managed to reproduce these issues on any of
our own machines, so the only way to go about this is to enable it and
see what happens.

While at it, kill some stale comments and improve the logging.

Acked-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 22:35:48 +02:00
Daniel Vetter
9270388e18 drm/i915: fix up ilk drps/ips locking
We change the drps/ips sw/hw state from different callers: Our own irq
handler, the external intel-ips module and from process context. Most
of these callers don't take any lock at all.

Protect everything by making the mchdev_lock irqsave and grabbing it in
all relevant callsites. Note that we have to convert a few sleeps in the
drps enable/disable code to delays, but alas, I'm not volunteering to
restructure the code around a few work items.

For paranoia add a spin_locked assert to ironlake_set_drps, too.

v2: Move one access inside the lock protection. Caught by the
dev_priv->ips mass-rename ...

v3: Resolve rebase conflict.

Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 21:53:52 +02:00
Daniel Vetter
73edd18f61 drm/i915: DE_PCU_EVENT irq is ilk-only
Like all the other drps/ips stuff. Hence add the corresponding check,
give the function a preciser prefix and move the single reg clearing into
the rps handling function, too.

Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 21:53:17 +02:00
Daniel Vetter
35eb73234b drm/i915: kill dev_priv->mchdev_lock
It's only ever a pointer to the global mchdev_lock, and we don't use
it at all.

Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 21:53:01 +02:00
Daniel Vetter
c6a828d326 drm/i915: move all rps state into dev_priv->rps
This way it's easier so see what belongs together, and what is used
by the ilk ips code. Also add some comments that explain the locking.

Note that (cur|min|max)_delay need to be duplicated, because
they're also used by the ips code.

v2: Missed one place that the dev_priv->ips change caught ...

Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 21:52:22 +02:00
Daniel Vetter
22bcfc6a4b drm/i915: use mutex_lock_interruptible for debugfs files
It's no fun if your shell hangs when the driver has gone on vacation
and you want to know why ...

Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 21:50:17 +02:00
Daniel Vetter
004777cb22 drm/i915: fixup up debugfs rps state handling
- Take the dev->struct_mutex around access the corresponding state
  (and adjusting the rps hw state).
- Add an assert to gen6_set_rps to ensure we don't forget about this
  in the future.
- Don't set up the min/max_freq files if it doesn't apply to the hw.
  And do the same for the gen6+ cache sharing file while at it.

v2: Move the gen6+ checks into the read/write callbacks. Thanks to the
awesome drm midlayer we can't check that when registering the debugfs
files, because the driver is not yet fully set up, specifically the
->load callback hasn't run yet.

Oh how I despise this disaster ...

v3: Also add a WARN_ON(mutex_is_locked) in set_rps to check the
locking.

v4: Use mutex_lock_interruptible, suggested by Chris Wilson.

Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (for v2)
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 21:49:54 +02:00
Daniel Vetter
02d719562e drm/i915: properly guard ilk ips state
The update_gfx_val function called from mark_busy wasn't taking the
mchdev_lock, as it should have. Also sprinkle a few spinlock asserts
over the code to document things better.

Things are still rather confusing, especially since a few variables
in dev_priv are used by both the gen6+ rps code and the ilk ips code.
But protected by totally different locks. Follow-on patches will clean
that up.

v2: Don't add a deadlock ... hence split up update_gfx_val into a
wrapper that grabs the lock and an internal __ variant for callsites
within intel_pm.c that already have taken the lock.

v3: Mark the internal helper as static, noticed by Ben Widawsky.

v4: Damien Lespiau had questions about the safety of the ips setup
sequence, explain in a comment why it works.

Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 21:45:17 +02:00
Paulo Zanoni
745ca3be81 drm/i915: add parentheses around PIXCLK_GATE definitions
By looking at the current way we're using these definitions I don't
think this commit will fix any bug, but programmers from the future
are evil and will certainly find ways to combine macro expansion with
operator precedence to introduce bugs that are hard to find.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 18:42:09 +02:00
Paulo Zanoni
5e49cea643 drm/i915: reindent Haswell register definitions
It's the only part of the i915_reg.h file that looks totally wrongly
indented, so I assume my editor config is the correct one.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 18:41:47 +02:00
Paulo Zanoni
602c43d34d drm/i915: completely reset the value of DDI_FUNC_CTL
Don't rely on previous values already set on the register. Everything
we're not explicitly setting should be zero for now.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 18:41:25 +02:00
Paulo Zanoni
dfcef252e0 drm/i915: correctly set the DDI_FUNC_CTL bpc field
Correctly erase the values previously set and also check for 6bpc and
10bpc.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 18:41:14 +02:00
Paulo Zanoni
f63eb7c452 drm/i915: set the DDI sync polarity bits
During my tests, everything worked even if the wrong polarity was set.
Still, we should try to set the correct values.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 18:38:18 +02:00
Paulo Zanoni
3f7c447faa drm/i915: fix pipe DDI mode select
Mask the value before changing it and also select DVI when needed.

DVI was working in cases where the BIOS was setting the correct value
because we were not masking the value before changing it.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 18:36:04 +02:00
Daniel Vetter
c96ea64ebb drm/i915: dump the device info
Handy for lazy people like me, or when people forget to add the output
of lspci -nn.

v2: Chris Wilson noticed that we have this duplicated already in the
i915_capabilites debugfs file. But there \n as separator looks better,
which would be a bit verbose in dmesg. Abuse the preprocessor to
extract this all.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-09 18:29:21 +02:00
Thomas Meyer
959f724728 drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]
The semantic patch that makes this change is available
in scripts/coccinelle/api/err_cast.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-09 09:58:44 +10:00
Dave Airlie
41494cbaea Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Daniel writes:

"- Regression fixer for an OOPS at boot when i915.ko is built-in and
  CONFIG_PM=n, introduce in 3.5 (patch from Hunt Xu)
- Regression fixer for occlusion query failures, the required w/a wasn't
  applied in all cases (thanks to Eric for tracking this on down).
- dmar vs. dma_buf imprt fix (Dave Airlie)
- 2 patches to fight down forcewake issues on snb. This is the stuff I've
  talked about 2 weeks ago already, it's a minefield. Investigation still
  going on, but afaict this is the best we have for now.
- a few minor things to keep coverty&compiler happy (Alan, Davendra,
  Stéphane)
- tons of hsw pci ids - this one is a bit late because internal approval
  sometimes takes a while, but ppl in charge finally agreed that world+dog
  already knows about ult and crw haswell variants ;-)

Wrt regressions I'm aware of:
- the power regression due to semaphores=1. Ben is running around with a
  killawatt, unfortunately we have a hard time reproducing this one. And
  this /shouldn't/ increase power usage. Ben has turned up a few odds bits
  though already.
- the lvds fix in 3.6-rc1 broke a backlight after lid close/open (but can
  be resurrected with a modeset cycle). I guess we anger the bios - I'm
  still looking into this one.
- gmbus broke edid reading on an odd-ball monitor, we need to fall-back.
  Due to vacation (both mine&the reporter's) this is stalling for a final
  patch and a tested-by on it. But issue is fully diagnosed."

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: correctly order the ring init sequence
  drm/i915: add more Haswell PCI IDs
  drm/i915: make rc6 in sysfs functions conditional
  drm/i915: Workaround hang with BSD and forcewake on SandyBridge
  drm/i915: Make intel_panel_get_backlight static.
  i915: don't map imported dma-bufs for dmar.
  drm/i915: remove unused variable
  drm/i915: Don't forget to apply SNB PIPE_CONTROL GTT workaround.
  drm/i915: fix forcewake related hangs on snb
  i915: Remove silly test
  i915: fix error path leak in intel_sdvo_write_cmd
  vlv: it might be wise if we initialised the flag value...
2012-08-09 09:54:49 +10:00
Marek Olšák
0f457e488c drm/radeon/kms: allow "invalid" DB formats as a means to disable DB
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-09 09:53:13 +10:00
Daniel Vetter
65bccb5c70 drm/i915: fixup desired rps frequency computation
In commit

commit 20b46e59dd
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jul 26 11:16:14 2012 +0200

    drm/i915: Only set the down rps limit when at the loweset frequency

The computation for the new desired frequency was extracted, but since
the desired frequency was passed-by value, the adjustments didn't
propgate back. Fix this.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-08 22:54:06 +02:00
Chris Wilson
2fedbff948 drm/i915: Add I915_GEM_PARAM_HAS_SEMAPHORES
Userspace tries to estimate the cost of ring switching based on whether
the GPU and GEM supports semaphores. (If we have multiple rings and no
semaphores, userspace assumes that the cost of switching rings between
batches is exorbitant and will endeavour to keep the next batch on the
active ring - as a coarse approximation to tracking both destination and
source surfaces.) Currently userspace has to guess whether semaphores
exist based on the chipset generation and the module parameter,
i915.semaphores. This is a crude and inaccurate guess as the defaults
internally depend upon other chipset features being enabled or disabled,
nor does it extend well into the future. By exporting a HAS_SEMAPHORES
parameter, we can easily query the driver and obtain an accurate answer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-08 14:29:12 +02:00
Daniel Vetter
0d8957c8a9 drm/i915: correctly order the ring init sequence
We may only start to set up the new register values after having
confirmed that the ring is truely off. Otherwise the hw might lose the
newly written register values. This is caught later on in the init
sequence, when we check whether the register writes have stuck.

Cc: stable@vger.kernel.org
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50522
Tested-by: Yang Guang <guang.a.yang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-08 10:23:35 +02:00
Chris Wilson
6c6cf5aa9c drm/i915: Only apply the SNB pipe control w/a to gen6
The requirements for the sync flush to be emitted prior to the render
cache flush is only true for SandyBridge. On IvyBridge and friends we
can just emit the flushes with an inline CS stall.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-08 09:34:32 +02:00
Paulo Zanoni
da612d880f drm/i915: add more Haswell PCI IDs
Also properly indent the HB IDs.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-07 13:17:33 +02:00
Hunt Xu
5ab3633d69 drm/i915: make rc6 in sysfs functions conditional
Commit 0136db586c merges rc6 information
into the power group. However, when compiled with CONFIG_PM not set,
modprobing i915 would taint since power_group_name is defined as NULL.

This patch makes these rc6 in sysfs functions conditional upon the
definition of the CONFIG_PM macro to avoid the above-mentioned problem.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45181
Cc: stable@vger.kernel.org
Tested-by: Kris Karas <bugs-a12@moonlit-rail.com>
Signed-off-by: Hunt Xu <mhuntxu@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-06 19:31:33 +02:00
Chris Wilson
bcf9dcc1e6 drm/i915: Workaround hang with BSD and forcewake on SandyBridge
For reasons that are not apparent to anybody, 990bbdadab (drm/i915:
Group the GT routines together in both code and vtable) breaks the use
of the BitStream Decoder ring on SandyBridge. The active ingredient of
that patch is the conversion from a udelay(10) to a udelay(1) in the
busy-wait loop of waiting for the forcewake acknowledge. If we restore
that udelay(10) or insert another udelay(1) afterwards (or any wait
longer than 250ns) everything works again. An alternative is also to
remove any delay from the busy-wait loop.

Given that in the atomic sections we want to complete the wait as quick
as possible to avoid blocking the CPU for too long, it makes sense to
remove the delay altogether and simply spin on the exit condition until
it completes. So we replace the udelay(1) with cpu_relax().

Papers over regression from

commit 990bbdadab
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Jul 2 11:51:02 2012 -0300

    drm/i915: Group the GT routines together in both code and vtable

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51738
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-06 10:43:29 +02:00
Stéphane Marchesin
faea35dd8a drm/i915: Make intel_panel_get_backlight static.
This function isn't used outside of intel_panel.c, so make it static.

Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-06 08:57:48 +02:00
Dave Airlie
f00f979145 i915: don't map imported dma-bufs for dmar.
The exporter should have given us pages in the correct place, avoid
the prepare object mapping phase on dmar systems.

This fixes an oops on a GM45/R600 machine, when running the intel/radeon
tests.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-05 22:53:59 +02:00
Devendra Naga
e47e9ad918 drm/i915: remove unused variable
the following warning was produced,

drivers/gpu/drm/i915/i915_gem_context.c: In function ‘i915_switch_context’:
drivers/gpu/drm/i915/i915_gem_context.c:454:6: warning: unused variable ‘ret’ [-Wunused-variable]

fix up by removing it

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-05 22:39:53 +02:00
Eric Anholt
e844b990b1 drm/i915: Don't forget to apply SNB PIPE_CONTROL GTT workaround.
If a buffer that was the target of a PIPE_CONTROL from userland was a
reused one that hadn't been evicted which had not previously had this
workaround applied, then the early return for a correct
presumed_offset in this function meant we would not bind it into the
GTT and the write would land somewhere else.

Fixes reproducible failures with GL_EXT_timer_query usage in apitrace,
and I also expect it to fix the intermittent OQ issues on snb that
danvet's been working on.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48019
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52932
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Carl Worth <cworth@cworth.org>
Tested-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-05 21:45:01 +02:00
Ben Skeggs
e2b34fa046 drm/nve0/fifo: add support for the flip completion swmthd
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-03 15:40:24 +10:00
Linus Torvalds
219c673438 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull Exynos DRM changes from Dave Airlie:
 "So I totally missed Inki's pull request for -next, its fully exynos
  self contained."

(I took just the actual commits, not Dave's two extraneous merges)

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (30 commits)
  drm/exynos: fixed exception to page allocation failure
  drm/exynos: use __free_page() to deallocate memory
  drm/exynos: fixed a comment to gem size.
  drm/exynos: removed unnecessary variable
  drm/exynos: do not release memory region from exporter.
  drm/exynos: set buffer type from exporter.
  drm/exynos: use alloc_page() to allocate pages.
  drm/exynos: fixed build warning.
  drm/exynos: fixed edid data setting at vidi connection request
  drm/exynos: check if raw edid data is fake or not for test
  drm/exynos: set edid fake data only for test.
  drm/exynos: removed unnecessary declaration.
  drm/exynos: fix buffer pitch calculation
  drm/exynos: check for null in return value of dma_buf_map_attachment()
  drm/exynos: return NULL if exynos_pages_to_sg fails
  drm/exynos: Use devm_* functions in exynos_mixer.c
  drm/exynos: Use devm_* functions in exynos_hdmi.c
  drm/exynos: Use devm_* functions in exynos_drm_fimd.c
  drm/exynos: Add missing static storage class specifier
  drm/exynos: add property for crtc mode
  ...
2012-07-30 10:06:23 -07:00
Daniel Vetter
6af2d180f8 drm/i915: fix forcewake related hangs on snb
... by adding seemingly redudant posting reads.

This little dragon lair exploded the first time around when we've
refactored the code a bit to use the common wait_for_atomic_us in
"drm/i915: Group the GT routines together in both code and vtable",
which caused QA to file fdo bug #51738.

Chris Wilson entertained a few approaches to fixing #51738: Replacing
the udelay(1) with the previously-used udelay(10) (or any other
"sufficiently larger" delay), adding a posting read, or ditching the
delay completely and using cpu_relax. We went with the cpu_relax and
"915: Workaround hang with BSD and forcewake on SandyBridge". Which
blew up in fdo bug #52424, but adding the posting read while still
using cpu_relax seems to also fix that, it looks like the
posting read is the important ingriedient to fix these rc6 related
hangs on snb.

Popular theories as to why this is like it is include:
- A herd of pink elephants got royally angered somehow.

- The gpu has internally different functional units and judging by the
  register offsets, the forcewake request register and the forcewake
  ack registers are _not_ in the same functional unit (or at least
  aren't reached through the same routes). Hence the posting read
  syncs up with the wrong block and gets the entire gpu confused.

- ...

As a minimal ducttape fix for 3.6, let's just put these posting reads
into place again. We can try fancier approaches (like adding back the
cpu_relax instead of the udelay) in -next.

This (re-)fixes a regression introduced in

commit 990bbdadab
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Jul 2 11:51:02 2012 -0300

    drm/i915: Group the GT routines together in both code and vtable

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Du Yan <yanx.du@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52424
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51738u
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-27 08:23:28 +02:00
Inki Dae
cb364e342d drm/exynos: fixed exception to page allocation failure
this patch corrects to deallocate the pages allocated already
at alloc_page failure.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:57 +09:00
Inki Dae
d73c1c995b drm/exynos: use __free_page() to deallocate memory
this patch uses __free_page() to deallocate the pages allocated
by alloc_page() and the pages doesn't need set_parge_dirty()
and mark_page_accessed() because they aren't from page cache so
removes them.

this patch has a pair with previous patch below,
	http://www.spinics.net/lists/dri-devel/msg24382.html

Changelog v2:
remove unnecessary arguments.

Changelog v3:
fix npages type.
- npages can have negative value.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:57 +09:00
Inki Dae
3c52b8804f drm/exynos: fixed a comment to gem size.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:57 +09:00
Inki Dae
e3fd38cffa drm/exynos: removed unnecessary variable
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:57 +09:00
Inki Dae
c374e73192 drm/exynos: do not release memory region from exporter.
the region should be released by exporter once dmabuf's refcount becomes 0.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:56 +09:00
Inki Dae
47fcdce2d5 drm/exynos: set buffer type from exporter.
when fd is imported to gem, whether the memory type from exporter
is contigous or not should be set to gem flag so that drm-based
driver can aware of the memory type.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:56 +09:00
Inki Dae
c62bc752f2 drm/exynos: use alloc_page() to allocate pages.
shmem_read_mapping_page_gfp() first tries to allocate pages from page cache
so if pages are allocated from page cache then these pages could have
valid cache line. after that cpu may read garbage data from cache
once gpu operation is completed with allocated pages. so with this patch,
Non-contiguous memory allocation request allocates pages from highmem
through alloc_page() with GFP_HIGHUSER_MOVABLE.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:56 +09:00
Inki Dae
f91f2f331e drm/exynos: fixed build warning.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:56 +09:00
Inki Dae
d3b62dbfc7 drm/exynos: fixed edid data setting at vidi connection request
edid data from user should be allocated and copied into vidi context and also
freed with disconnection.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:56 +09:00
Inki Dae
d7b8478aa9 drm/exynos: check if raw edid data is fake or not for test
if raw edid data isn't same as fake data then it can't be tested.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:56 +09:00
Inki Dae
d07d39df30 drm/exynos: set edid fake data only for test.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:56 +09:00
Inki Dae
a04f3fab2a drm/exynos: removed unnecessary declaration.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:55 +09:00
Cooper Yuan
3fd6b69474 drm/exynos: fix buffer pitch calculation
Signed-off-by: Cooper Yuan <cooperyuan@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:55 +09:00
Subash Patel
0dd3b72cc6 drm/exynos: check for null in return value of dma_buf_map_attachment()
dma_buf_map_attachment() can return NULL and valid sg as return
value. Hence the check for the returned scatter-gather must be using
the inline function IS_ERR_OR_NULL() in place of IS_ERR()

Signed-off-by: Subash Patel <subash.ramaswamy@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:55 +09:00
Subash Patel
56fb5380c7 drm/exynos: return NULL if exynos_pages_to_sg fails
exynos_pages_to_sg() internally calls sg_kmalloc() which can return
no pages when the system is under high memory crunch. One such instance
is chromeos-install in the chromeos. This patch adds check for the return
value of the function in subject to return NULL on failure.

Signed-off-by: Subash Patel <subash.ramaswamy@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:55 +09:00
Sachin Kamat
9416dfa76a drm/exynos: Use devm_* functions in exynos_mixer.c
devm_* functions are device managed functions and make error handling
and cleanup cleaner and simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:55 +09:00
Sachin Kamat
a6e6507210 drm/exynos: Use devm_* functions in exynos_hdmi.c
devm_* functions are device managed functions and make error handling
and cleanup cleaner and simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:55 +09:00
Sachin Kamat
edc572662a drm/exynos: Use devm_* functions in exynos_drm_fimd.c
devm_* functions are device managed functions and make error handling
and cleanup cleaner and simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:55 +09:00
Sachin Kamat
2fb16de327 drm/exynos: Add missing static storage class specifier
Fixes the following sparse warning:
drivers/gpu/drm/exynos/exynos_drm_connector.c:199:20:
warning: symbol 'exynos_drm_best_encoder' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27 11:13:54 +09:00
Joonyoung Shim
3b8d1cf818 drm/exynos: add property for crtc mode
This patch adds exynos specific property for crtc mode. The crtc mode
property has tow modes - normal and blank. The normal mode is default
mode and can use crtc normally. The blank mode turns off the private
plane of crtc, so we don't see crtc screen but can see other plane
screens.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27 11:13:54 +09:00
Joonyoung Shim
a365d9eba3 drm/exynos: add crtc disable function
The crtc disable is used to turn off private plane for crtc.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27 11:13:54 +09:00
Joonyoung Shim
cf5188ac1c drm/exynos: add plane enable/disable
The plane enable/disable can control only a power of plane, so they will
be helpful to handle planes with dpms.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27 11:13:54 +09:00
Joonyoung Shim
d55ab76efb drm/exynos: remove unnecessary connector dpms control
The connector dpms should be controlled only by DPMS property and mode
set.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27 11:13:54 +09:00
Joonyoung Shim
bebab8ff31 drm/exynos: fix dpms operation for mode set
When we do mode set, the dpms mode should be ON. Don't control dpms in
crtc commit function.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27 11:13:54 +09:00
Joonyoung Shim
00ae67cf26 drm/exynos: add property for plane zpos
The exynos drm driver used a specific ioctl - DRM_EXYNOS_PLANE_SET_ZPOS
to set zpos of plane. It can be substitute to property of plane. This
patch adds a property for plane zpos and removes
DRM_EXYNOS_PLANE_SET_ZPOS ioctl.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27 11:13:54 +09:00
Joonyoung Shim
4070d212eb drm/exynos: update overlay via plane from crtc
There is no any reason to update overlay at crtc directly because the
crtc uses plane. Move its code to plane and call proper functions of
plane from crtc.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27 11:13:53 +09:00
Joonyoung Shim
b5d2eb3bd6 drm/exynos: use private plane for crtc
The crtc can use private plane instead it has overlay struct. It will be
helpful use plane feature from crtc later.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27 11:13:53 +09:00
Joonyoung Shim
fdc575e795 drm/exynos: define to_exynos_plane macro
Add macro to get struct exynos_plane from struct drm_plane pointer.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27 11:13:53 +09:00
Joonyoung Shim
d249ce024b drm/exynos: fix to set pipe of crtc
It is enough to set pipe of crtc to manager only when do mode_set of
crtc.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27 11:13:53 +09:00
Joonyoung Shim
aeb292245a drm/exynos: fix point to call overlay_ops->mode_set
Call overlay->mode_set from crtc->mode_set instead of encoder->mode_set,
it makes codes clearly.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27 11:13:53 +09:00
Linus Torvalds
bd22dc17e4 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "One of the smaller drm -next pulls in ages!

  Ben (nouveau) has a rewrite in progress but we decided to leave it
  stew for another cycle, so just some fixes from him.

   - radeon: lots of documentation work, fixes, more ring and locking
     changes, pcie gen2, more dp fixes.
   - i915: haswell features, gpu reset fixes, /dev/agpgart removal on
     machines that we never used it on, more VGA/HDP fix., more DP fixes
   - drm core: cleanups from Daniel, sis 64-bit fixes, range allocator
     colouring.

  but yeah fairly quiet merge this time, probably because I missed half
  of it!"

Trivial add-add conflict in include/linux/pci_regs.h

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (255 commits)
  drm/nouveau: init vblank requests list
  drm/nv50: extend vblank semaphore to generic dmaobj + offset pair
  drm/nouveau: mark most of our ioctls as deprecated, move to compat layer
  drm/nouveau: move current gpuobj code out of nouveau_object.c
  drm/nouveau/gem: fix object reference leak in a failure path
  drm/nv50: rename INVALID_QUERY_OR_TEXTURE error to INVALID_OPERATION
  drm/nv84: decode PCRYPT errors
  drm/nouveau: dcb table quirk for fdo#50830
  nouveau: Fix alignment requirements on src and dst addresses
  drm/i915: unbreak lastclose for failed driver init
  drm/i915: Set the context before setting up regs for the context.
  drm/i915: constify mode in crtc_mode_fixup
  drm/i915/lvds: ditch ->prepare special case
  drm/i915: dereferencing an error pointer
  drm/i915: fix invalid reference handling of the default ctx obj
  drm/i915: Add -EIO to the list of known errors for __wait_seqno
  drm/i915: Flush the context object from the CPU caches upon switching
  drm/radeon: fix dpms on/off on trinity/aruba v2
  drm/radeon: on hotplug force link training to happen (v2)
  drm/radeon: fix hotplug of DP to DVI|HDMI passive adapters (v2)
  ...
2012-07-26 14:18:18 -07:00
Eugeni Dodonov
ab3951eb74 drm/i915: prevent possible pin leak on error path
We should not hit this under any sane conditions, but still, this does not
looks right.

CC: Chris Wilson <chris@chris-wilson.co.uk>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
CC: stable@vger.kernel.org
Reported-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Reviewed-by: Chris Wlison <chris@chris-wilson.co.uk>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-26 22:32:29 +02:00
Daniel Vetter
acbe947550 drm/i915: rip out sanitize_pm again
We believe to have squashed all issues around the gen6+ rps interrupt
generation and why the gpu sometimes got stuck. With that cleared up,
there's no user left for the sanitize_pm infrastructure, so let's just
rip it out.

Note that 'intel_reg_write 0xa014 0x13070000' is the w/a if we find
ourselves stuck again.

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-26 13:37:13 +02:00
Daniel Vetter
20b46e59dd drm/i915: Only set the down rps limit when at the loweset frequency
The power docs say that when the gt leaves rc6, it is in the lowest
frequency and only about 25 usec later will switch to the frequency
selected in GEN6_RPNSWREQ. If the downclock limit expires in that
window and the down limit is set to the lowest possible frequency, the
hw will not send the down interrupt. Which leads to a too high gpu
clock and wasted power.

Chris Wilson already worked on this with

commit 7b9e0ae6da
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Sat Apr 28 08:56:39 2012 +0100

    drm/i915: Always update RPS interrupts thresholds along with
    frequency

but got the logic inverted: The current code set the down limit as
long as we haven't reached it. Instead of only once with reached the
lowest frequency.

Note that we can't always set the downclock limit to 0, because
otherwise the hw will keep on bugging us with downclock request irqs
once the lowest level is reached.

For similar reasons also always set the upclock limit, otherwise the
hw might poke us again with interrupts.

v2: Chris Wilson noticed that the limit reg is also computed in
sanitize_pm. To avoid duplication, extract the code into a common
function.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-26 13:29:30 +02:00
Chris Wilson
e6994aeedc drm/i915: Export ability of changing cache levels to userspace
By selecting the cache level (essentially whether or not the CPU snoops
any updates to the bo, and on more recent machines whether it resides
inside the CPU's last-level-cache) a userspace driver is able to then
manage all of its memory within buffer objects, if it so desires. This
enables the userspace driver to accelerate uploads and more importantly
downloads from the GPU and to able to mix CPU and GPU rendering/activity
efficiently.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Added code comment about where we plan to stuff platform
specific cacheing control bits in the ioctl struct.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-26 12:56:25 +02:00
Chris Wilson
42d6ab4839 drm/i915: Segregate memory domains in the GTT using coloring
Several functions of the GPU have the restriction that differing memory
domains cannot be placed next to each other (as the GPU may prefetch
beyond the end of one domain and hang as it crosses into the other
domain). We use the facility of the drm_mm to mark ranges with a
particular color that corresponds to the cache attributes of those pages
in order to prevent allocating adjacent blocks of differing memory
types.

v2: Rebase ontop of drm_mm coloring v2.
v3: Fix rebinding existing gtt_space and add a verification routine.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-26 12:56:25 +02:00
Alan Cox
9978cf5042 i915: Remove silly test
drv_priv->gmbus is an array. Comparing it with NULL is somewhat less useful
than a chocolate teapot.

Possibly we should be testing bus != NULL each iteration of the loop
instead ?

gcc could help by warning too!

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-26 09:50:35 +02:00
Alan Cox
0274df3e43 i915: fix error path leak in intel_sdvo_write_cmd
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-26 09:50:04 +02:00
Alan Cox
af447bd358 vlv: it might be wise if we initialised the flag value...
Otherwise our initial behaviour is "randomly save a bogus PLL
choice" as far as I can see.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-26 09:47:31 +02:00
Dave Airlie
98c7b42375 Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Daniel writes: (this pull is the one with the bad patch dropped)
First pile of fixes for 3.6 already, and I'm afraid it's a bit larger than
what I'd wish for. But I've moved all the feature-y stuff to -next, so
this really is all -fixes. Most of it is handling fallout from the hw
context stuff, discovered now that mesa git has started using them for
real. Otherwise all just small fixes:
- unbreak modeset=0 on gen6+ (regressed in next)
- const mismatch fix for ->mode_fixup
- simplify overly clever lvds modeset code (current code can totally
  confuse backlights, resulting in broken panels until a full power draw
  restores them).
- fix some fallout from the flushing_list disabling (regression only
  introduced in -next)
- DP link train improvements (this also kills the last 3.2 dp regression
  afaik)
- bugfix for the new ddc VGA detection on newer platforms
- minor backlight fixes (one of them a -next regression)
- only enable the required PM interrupts (to avoid waking up the cpu
  unnecessarily)
- some really minor bits (workaround clarification, make coverty happy,
  hsw init fix)
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: (23 commits)
  drm/i915: unbreak lastclose for failed driver init
  drm/i915: Set the context before setting up regs for the context.
  drm/i915: constify mode in crtc_mode_fixup
  drm/i915/lvds: ditch ->prepare special case
  drm/i915: dereferencing an error pointer
  drm/i915: fix invalid reference handling of the default ctx obj
  drm/i915: Add -EIO to the list of known errors for __wait_seqno
  drm/i915: Flush the context object from the CPU caches upon switching
  drm/i915: Make the lock for pageflips interruptible
  drm/i915: don't forget the PCH backlight registers
  drm/i915: Insert a flush between batches if the breadcrumb was dropped
  drm/i915: missing error case in init status page
  drm/i915: mask tiled bit when updating ILK sprites
  drm/i915: try to train DP even harder
  drm/i915: kill intel_ddc_probe
  drm/i915: check whether we actually received an edid in detect_ddc
  drm/i915: fix up PCH backlight #define mixup
  drm/i915: Add comments to explain the BSD tail write workaround
  drm/i915: Disable the BLT on pre-production SNB hardware
  drm/i915: initialize power wells in modeset_init_hw
  ...
2012-07-26 10:40:31 +10:00