Hygon Dhyana support (Pu Wen)
- sb_edac: New maintainer + fixes (Tony Luck)
Error reporting improvements and fixes (Qiuxu Zhuo)
- ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM error
accounting (Fan Wu)
- altera_edac: Stratix10 support and refactoring (Thor Thayer)
Out of tree addition:
- acpi_adxl: Address Translation interface using an ACPI DSM (Tony Luck)
- the usual amount of other misc fixes and cleanups all over.
-----BEGIN PGP SIGNATURE-----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=HEJK
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"The EDAC tree was busier than usual this cycle as the shortlog below
shows.
Also, this pull request is carrying an ACPI DSM driver which is used
to ask the platform to supply the DIMM location of a reported hardware
error and thus simplify all the EDAC logic when trying to map the
error address to the respective DIMM.
Core EDAC updates:
- amd64_edac: AMD family 0x17, models 0x10-0x2f support (Michael Jin)
Hygon Dhyana support (Pu Wen)
- sb_edac: New maintainer + fixes (Tony Luck) Error reporting
improvements and fixes (Qiuxu Zhuo)
- ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM
error accounting (Fan Wu)
- altera_edac: Stratix10 support and refactoring (Thor Thayer)
Out of tree addition:
- acpi_adxl: Address Translation interface using an ACPI DSM (Tony
Luck)
- the usual amount of other misc fixes and cleanups all over"
* tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits)
ACPI/ADXL: Add address translation interface using an ACPI DSM
EDAC, thunderx: Fix memory leak in thunderx_l2c_threaded_isr()
EDAC, skx_edac: Fix logical channel intermediate decoding
EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting
EDAC, altera: Work around int-to-pointer-cast warnings
EDAC, amd64: Add Hygon Dhyana support
EDAC: Raise the maximum number of memory controllers
arm64: dts: stratix10: Add peripheral EDAC nodes
EDAC, altera: Add Stratix10 peripheral support
EDAC, altera: Merge Stratix10 into the Arria10 SDRAM probe routine
arm64: dts: stratix10: Add SDRAM node
EDAC, altera: Combine Stratix10 and Arria10 probe functions
arm64: dts: stratix10: Additions to EDAC System Manager
EDAC, i7core: Remove set but not used variable pvt
EDAC, ghes: Use CPER module handles to locate DIMMs
EDAC: Correct DIMM capacity unit symbol
EDAC, sb_edac: Fix signedness bugs in *_get_ha() functions
EDAC, sb_edac: Fix reporting for patrol scrubber errors
EDAC, sb_edac: Return early on ADDRV bit and address type test
MAINTAINERS: Update maintainer for drivers/edac/sb_edac.c
...
Pull perf updates from Ingo Molnar:
"The main updates in this cycle were:
- Lots of perf tooling changes too voluminous to list (big perf trace
and perf stat improvements, lots of libtraceevent reorganization,
etc.), so I'll list the authors and refer to the changelog for
details:
Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter
Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven
Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas
Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir
Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa.
... with the bulk of the changes written by Jiri Olsa, Tzvetomir
Stoyanov and Arnaldo Carvalho de Melo.
- Continued intel_rdt work with a focus on playing well with perf
events. This also imported some non-perf RDT work due to
dependencies. (Reinette Chatre)
- Implement counter freezing for Arch Perfmon v4 (Skylake and newer).
This allows to speed up the PMI handler by avoiding unnecessary MSR
writes and make it more accurate. (Andi Kleen)
- kprobes cleanups and simplification (Masami Hiramatsu)
- Intel Goldmont PMU updates (Kan Liang)
- ... plus misc other fixes and updates"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits)
kprobes/x86: Use preempt_enable() in optimized_callback()
x86/intel_rdt: Prevent pseudo-locking from using stale pointers
kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack
perf/x86/intel: Export mem events only if there's PEBS support
x86/cpu: Drop pointless static qualifier in punit_dev_state_show()
x86/intel_rdt: Fix initial allocation to consider CDP
x86/intel_rdt: CBM overlap should also check for overlap with CDP peer
x86/intel_rdt: Introduce utility to obtain CDP peer
tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file
tools lib traceevent: Separate out tep_strerror() for strerror_r() issues
perf python: More portable way to make CFLAGS work with clang
perf python: Make clang_has_option() work on Python 3
perf tools: Free temporary 'sys' string in read_event_files()
perf tools: Avoid double free in read_event_file()
perf tools: Free 'printk' string in parse_ftrace_printk()
perf tools: Cleanup trace-event-info 'tdata' leak
perf strbuf: Match va_{add,copy} with va_end
perf test: S390 does not support watchpoints in test 22
perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG
tools include: Adopt linux/bits.h
...
Going primarily by:
https://en.wikipedia.org/wiki/List_of_Intel_Atom_microprocessors
with additional information gleaned from other related pages; notably:
- Bonnell shrink was called Saltwell
- Moorefield is the Merriefield refresh which makes it Airmont
The general naming scheme is: FAM6_ATOM_UARCH_SOCTYPE
for i in `git grep -l FAM6_ATOM` ; do
sed -i -e 's/ATOM_PINEVIEW/ATOM_BONNELL/g' \
-e 's/ATOM_LINCROFT/ATOM_BONNELL_MID/' \
-e 's/ATOM_PENWELL/ATOM_SALTWELL_MID/g' \
-e 's/ATOM_CLOVERVIEW/ATOM_SALTWELL_TABLET/g' \
-e 's/ATOM_CEDARVIEW/ATOM_SALTWELL/g' \
-e 's/ATOM_SILVERMONT1/ATOM_SILVERMONT/g' \
-e 's/ATOM_SILVERMONT2/ATOM_SILVERMONT_X/g' \
-e 's/ATOM_MERRIFIELD/ATOM_SILVERMONT_MID/g' \
-e 's/ATOM_MOOREFIELD/ATOM_AIRMONT_MID/g' \
-e 's/ATOM_DENVERTON/ATOM_GOLDMONT_X/g' \
-e 's/ATOM_GEMINI_LAKE/ATOM_GOLDMONT_PLUS/g' ${i}
done
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: dave.hansen@linux.intel.com
Cc: len.brown@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The count of errors is picked up from bits 52:38 of the machine check
bank status register. But this is the count of *corrected* errors. If an
uncorrected error is being logged, the h/w sets this field to 0. Which
means that when edac_mc_handle_error() is called, the EDAC core will
carefully add zero to the appropriate uncorrected error counts.
Signed-off-by: Tony Luck <tony.luck@intel.com>
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180928213934.19890-1-tony.luck@intel.com
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This
has the side effect of defaulting to iterating using "cpu" node names in
preference to the deprecated (for FDT) device_type == "cpu".
The error messages are removed in the process as it's not the driver's
job to be checking cpu nodes. Any problems with cpu nodes should be
noticed by the architecture code.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac@vger.kernel.org
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
The altera edac driver passes a token from a DT resource as
resource_size_t into an SMC call, but casts it to an __iomem pointer and
then a plain void pointer inbetween, mixing three or four incompatible
types in the process. The compiler complains about one of the
conversions:
drivers/edac/altera_edac.c: In function 'altr_init_a10_ecc_block':
drivers/edac/altera_edac.c:1053:10: error: cast to pointer from integer of \
different size [-Werror=int-to-pointer-cast]
base = (void __iomem *)res.start;
^
drivers/edac/altera_edac.c: In function 'altr_edac_a10_probe':
drivers/edac/altera_edac.c:2062:10: error: cast to pointer from integer of \
different size [-Werror=int-to-pointer-cast]
base = (void __iomem *)res.start;
Using a static checker probably also notices the __iomem cast. Solving
this properly isn't trivial, but simply casting to a 'uintptr_t' instead
of 'void __iomem *' makes it less wrong and should avoid the warnings.
Fixes: d5fc912556 ("EDAC, altera: Combine Stratix10 and Arria10 probe functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: David Frey <dpfrey@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20180927100949.973078-1-arnd@arndb.de
Remove the unused local variable pvt:
drivers/edac/i7core_edac.c: In function 'i7core_mce_check_error':
drivers/edac/i7core_edac.c:1818:21: warning: variable 'pvt' set but not used \
[-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1537841043-108267-1-git-send-email-yuehaibing@huawei.com
The {i3200|i7core|sb|skx}_edac drivers show DIMM capacity using the
wrong unit symbol: 'Mb' - megabit. Fix them by replacing 'Mb' with
'MiB' - mebibyte.
[Tony: These are all "edac_dbg()" messages, so this won't break scripts
that parse console logs.]
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20180919003433.16475-1-tony.luck@intel.com
A static checker gave the following warnings:
drivers/edac/sb_edac.c:1030 ibridge_get_ha() warn: signedness bug returning '(-22)'
drivers/edac/sb_edac.c:1037 knl_get_ha() warn: signedness bug returning '(-22)'
Both because the functions are declared to return a "u8", but try to
return -EINVAL for the error case.
Fix by returning 0xff (since the caller doesn't look at, or pass on, the
return value).
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180914201905.GA30946@agluck-desk
Signed-off-by: Borislav Petkov <bp@suse.de>
Add error reporting driver for Single Bit Errors (SBEs) and Double Bit
Errors (DBEs). As of now, this driver supports error reporting for
Last Level Cache Controller (LLCC) of Tag RAM and Data RAM. Interrupts
are triggered when the errors happen in the cache, the driver handles
those interrupts and dumps the syndrome registers.
Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Co-developed-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
sb_edac sometimes reports the wrong DIMM for a memory error found by
the patrol scrubber. That is because the hardware provides only a 4KB
page-aligned address for the error case.
This means that the EDAC driver will point at the DIMM matching offset
0x0 in the 4KB page, but because of interleaving across channels and
ranks, the actual DIMM involved may be different if the error is on some
other cache line within the page.
Therefore, reconstruct the socket/iMC/channel information from the "mce"
structure passed to the EDAC driver. The DIMM cannot be determined, so
pass "dimm=-1" to the EDAC core. It will report that all the DIMMs on
that channel may be affected.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180907230828.13901-3-tony.luck@intel.com
[ Improve comments on the functions to convert bank number
to memory controller number. Minor cleanup to commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
[ Massage commit message more. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Users of the mce_register_decode_chain() are called for every logged
error. EDAC drivers should check:
1) Is this a memory error? [bit 7 in status register]
2) Is there a valid address? [bit 58 in status register]
3) Is the address a system address? [bitfield 8:6 in misc register]
The sb_edac driver performed test "1" twice. Waited far too long to
perform check "2". Didn't do check "3" at all.
Fix it by moving the test for valid address from
sbridge_mce_output_error() into sbridge_mce_check_error() and add a test
for the type immediately after. Delete the redundant check for the type
of the error from sbridge_mce_output_error().
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180907230828.13901-2-tony.luck@intel.com
[ Re-word commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Split regmap_config.use_single_rw into use_single_read and
use_single_write. This change enables drivers of devices which only
support bulk operations in one direction to use the regmap_bulk_*()
functions for both directions and have their bulk operation split into
single operations only when necessary.
Update all struct regmap_config instances where use_single_rw==true to
instead set both use_single_read and use_single_write. No attempt was
made to evaluate whether it is possible to set only one of
use_single_read or use_single_write.
Signed-off-by: David Frey <dpfrey@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new device IDs for family 17h, models 10h-2fh.
This is required by amd64_edac_mod in order to properly detect PCI
device functions 0 and 6.
Signed-off-by: Michael Jin <mikhail.jin@gmail.com>
Reviewed-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180816192840.31166-1-mikhail.jin@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Extend the driver to check whether segment number and bus number matches
when deciding how to group memory controller PCI devices to CPU sockets.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180724190213.26359-1-msys.mizuma@gmail.com
[ Cleanup commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
In the quest to remove all stack VLA usage from the kernel[1], switch to
using a kmalloc-allocated buffer instead of stack space. This should be
fine since the existing routine is allocating memory too.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Jan Glauber <jglauber@cavium.com>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180629184850.GA37464@beast
Link: https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com [1]
Signed-off-by: Borislav Petkov <bp@suse.de>
Make sure to free and deregister the addrmatch and chancounts devices
allocated during probe in all error paths. Also fix use-after-free in a
probe error path and in the remove success path where the devices were
being put before before deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes: 356f0a3086 ("i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy")
Link: http://lkml.kernel.org/r/20180612124335.6420-2-johan@kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
Make sure to use put_device() to free the initialised struct device so
that resources managed by driver core also gets released in the event of
a registration failure.
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: Denis Kirjanov <kirjanov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes: 2d56b109e3 ("EDAC: Handle error path in edac_mc_sysfs_init() properly")
Link: http://lkml.kernel.org/r/20180612124335.6420-1-johan@kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
If regmap_write() fails, we should release some resources as done in all
the other error handling paths of the function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180610174532.22071-1-christophe.jaillet@wanadoo.fr
Fixes: e9918d7faf ("EDAC, altera: Handle SDRAM Uncorrectable Errors on Stratix10")
Signed-off-by: Borislav Petkov <bp@suse.de>
ARM machines all have DMI tables so if they request hw error reporting
through GHES, then the driver should be able to detect DIMMs and report
errors successfully (famous last words :)).
Make the platform-based list x86-specific so that ghes_edac can load on
ARM.
Reported-by: Qiang Zheng <zhengqiang10@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Tested-by: Qiang Zheng <zhengqiang10@huawei.com>
Link: https://lkml.kernel.org/r/1526039543-180996-1-git-send-email-zhengqiang10@huawei.com
The kbuild test robot reported the following warning:
drivers/edac/altera_edac.c: In function 'ocram_free_mem':
drivers/edac/altera_edac.c:1410:42: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
gen_pool_free((struct gen_pool *)other, (u32)p, size);
^
After adding support for ARM64 architectures, the unsigned long
parameter is 64 bits and causes a build warning on 64-bit configs. Fix
by casting to the correct size (unsigned long) instead of u32.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes: c3eea1942a ("EDAC, altera: Add Altera L2 cache and OCRAM support")
Link: http://lkml.kernel.org/r/1526317441-4996-1-git-send-email-thor.thayer@linux.intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Prevent build error when CONFIG_ACPI_NFIT=m and CONFIG_EDAC_SKX=y by
limiting EDAC_SKX based on how ACPI_NFIT is set.
Fixes this build error:
drivers/edac/skx_edac.o: In function `get_nvdimm_info':
../drivers/edac/skx_edac.c:399: undefined reference to `nfit_get_smbios_id'
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes: 58ca9ac146 ("EDAC, skx_edac: Detect non-volatile DIMMs")
Link: http://lkml.kernel.org/r/3af91354-8e19-d2af-1bba-ced8dce053f1@infradead.org
Signed-off-by: Borislav Petkov <bp@suse.de>
... for improved readability. Also, add a local mask variable for the
same reason.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
The ghes_edac driver obtains memory type from SMBIOS type 17, but it
does not recognize DDR4 and NVDIMM types.
Add support of DDR4 and NVDIMM types. NVDIMM type is denoted by memory
type DDR3/4 and non-volatile.
Reported-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180509222030.9299-1-toshi.kani@hpe.com
Signed-off-by: Borislav Petkov <bp@suse.de>
On Stratix10, uncorrectable errors are routed to the SError exception
instead of the IRQ exceptions. In Stratix10, uncorrectable SErrors
must be treated as fatal and will cause a panic. Older Altera/Intel
parts printed out a message for UE so do that here using the notifier
framework.
Record the UE in sticky registers that retain the state through a reset.
Check these registers on probe and printout the error on startup.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mark.rutland@arm.com
Cc: mchehab@kernel.org
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1526079610-5527-1-git-send-email-thor.thayer@linux.intel.com
[ Remove unused var in s10_edac_dberr_handler(), reorder args. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
The use of the @ghes argument was removed in a previous commit, but
function signature was not updated to reflect this.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: linux-acpi@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180430213358.8319-1-mr.nuke.me@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Add a null check for ghes_pvt, before dereferencing it. The pointer
could still be null in case the return path is taken before initialising
ghes_pvt in the registration function.
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lkml <linux-kernel@vger.kernel.org>
Link: http://lkml.kernel.org/r/1524737809-24475-1-git-send-email-sughosh.ganu@arm.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Tony reported seeing
"Internal error: Can't find EDAC structure"
when injecting correctable errors due to the fact that ghes_edac would
still load even if the whitelist won't hit. Drop the pr_err() in
ghes_edac_report_mem_error() for now due to the hacky way how ghes_edac
depends on ghes.c.
While at it, make ghes_edac_register() return an error if it doesn't hit
in the whitelist as it is the only sensible thing to do in that
situation.
Furthermore, move the call to it to happen last in ghes_probe() so that
GHES initializing properly does not depend on ghes_edac init at all
as latter is only reporting errors and not required for GHES's proper
functioning.
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Tested-by: Sughosh Ganu <sughosh.ganu@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20180420182015.zao3olss4tvvlxki@agluck-desk
* misc fixes
-----BEGIN PGP SIGNATURE-----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=K89j
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"Noteworthy is the NVDIMM support:
- NVDIMM support to EDAC (Tony Luck)
- misc fixes"
* tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, sb_edac: Remove variable length array usage
EDAC, skx_edac: Detect non-volatile DIMMs
firmware, DMI: Add function to look up a handle and return DIMM size
acpi, nfit: Add function to look up nvdimm device and provide SMBIOS handle
EDAC: Add new memory type for non-volatile DIMMs
EDAC: Drop duplicated array of strings for memory type names
EDAC, layerscape: Allow building for LS1021A
This removes the entire architecture code for blackfin, cris, frv, m32r,
metag, mn10300, score, and tile, including the associated device drivers.
I have been working with the (former) maintainers for each one to ensure
that my interpretation was right and the code is definitely unused in
mainline kernels. Many had fond memories of working on the respective
ports to start with and getting them included in upstream, but also saw
no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company
in charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems
that all the SoC product lines are still around, but have not used the
custom CPU architectures for several years at this point. In contrast,
CPU instruction sets that remain popular and have actively maintained
kernel ports tend to all be used across multiple licensees.
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I made
sure that they are all unused. Some architectures (notably tile, mn10300,
and blackfin) are still being shipped in products with old kernels,
but those products will never be updated to newer kernel releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing their
support or getting it added to mainline gcc in the first place.
They all have patched gcc-7.3 ports that work to some degree, but
complete upstream support won't happen before gcc-8.1. Csky posted
their first kernel patch set last week, their situation will be similar.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fQ8z
-----END PGP SIGNATURE-----
Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pul removal of obsolete architecture ports from Arnd Bergmann:
"This removes the entire architecture code for blackfin, cris, frv,
m32r, metag, mn10300, score, and tile, including the associated device
drivers.
I have been working with the (former) maintainers for each one to
ensure that my interpretation was right and the code is definitely
unused in mainline kernels. Many had fond memories of working on the
respective ports to start with and getting them included in upstream,
but also saw no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company in
charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
seems that all the SoC product lines are still around, but have not
used the custom CPU architectures for several years at this point. In
contrast, CPU instruction sets that remain popular and have actively
maintained kernel ports tend to all be used across multiple licensees.
[ See the new nds32 port merged in the previous commit for the next
generation of "one company in charge of an SoC line, a CPU
microarchitecture and a software ecosystem" - Linus ]
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I
made sure that they are all unused. Some architectures (notably tile,
mn10300, and blackfin) are still being shipped in products with old
kernels, but those products will never be updated to newer kernel
releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing
their support or getting it added to mainline gcc in the first
place. They all have patched gcc-7.3 ports that work to some
degree, but complete upstream support won't happen before gcc-8.1.
Csky posted their first kernel patch set last week, their situation
will be similar
[ Palmer Dabbelt points out that RISC-V support is in mainline gcc
since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]"
This really says it all:
2498 files changed, 95 insertions(+), 467668 deletions(-)
* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
MAINTAINERS: UNICORE32: Change email account
staging: iio: remove iio-trig-bfin-timer driver
tty: hvc: remove tile driver
tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
serial: remove tile uart driver
serial: remove m32r_sio driver
serial: remove blackfin drivers
serial: remove cris/etrax uart drivers
usb: Remove Blackfin references in USB support
usb: isp1362: remove blackfin arch glue
usb: musb: remove blackfin port
usb: host: remove tilegx platform glue
pwm: remove pwm-bfin driver
i2c: remove bfin-twi driver
spi: remove blackfin related host drivers
watchdog: remove bfin_wdt driver
can: remove bfin_can driver
mmc: remove bfin_sdh driver
input: misc: remove blackfin rotary driver
input: keyboard: remove bf54x driver
...
The Tile architecture is obsolete and getting removed from the kernel,
this driver appears to only be used there, and not on the ARM based
successors (Tile-Mx, BlueField), so we should remove it as well.
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In preparation for enabling -Wvla, remove VLA and replace it with a
fixed-length array instead.
Also, remove max_interleave as it is no longer needed.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180314182131.GA25259@embeddedgus
Signed-off-by: Borislav Petkov <bp@suse.de>
This just covers the topology function of the EDAC driver. We locate
which DIMM slots are populated with NVDIMMs and query the NFIT and
SMBIOS tables to get the size.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: linux-acpi@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-nvdimm@lists.01.org
Link: http://lkml.kernel.org/r/20180312182430.10335-6-tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
There are now non-volatile versions of DIMMs. Add a new entry to "enum
mem_type" and a new string in edac_mem_types[].
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-nvdimm@lists.01.org
Link: http://lkml.kernel.org/r/20180312182430.10335-3-tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Somehow we ended up with two separate arrays of strings to describe the
"enum mem_type" values.
In edac_mc.c we have an exported list edac_mem_types[] that is used
by a couple of drivers in debug messaged.
In edac_mc_sysfs.c we have a private list that is used to display
values in:
/sys/devices/system/edac/mc/mc*/dimm*/dimm_mem_type
/sys/devices/system/edac/mc/mc*/csrow*/mem_type
This list was missing a value for MEM_LRDDR3.
The string values in the two lists were different :-(
Combining the lists, I kept the values so that the sysfs output
will be unchanged as some scripts may depend on that.
Reported-by: Borislav Petkov <bp@suse.de>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-nvdimm@lists.01.org
Link: http://lkml.kernel.org/r/20180312182430.10335-2-tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The LS1021A has a memory controller supported by this driver. It builds
just fine, and I've done some rudimentary testing using the error
injection facility, which suggests that it is indeed working.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: York Sun <york.sun@nxp.com>
Cc: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180220150912.2954-1-rasmus.villemoes@prevas.dk
Signed-off-by: Borislav Petkov <bp@suse.de>
Commit
3286d3eb90 ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4")
decreased NUM_CHANNELS from 8 to 4, but this is not enough for Knights
Landing which supports up to 6 channels.
This caused out-of-bounds writes to pvt->mirror_mode and pvt->tolm
variables which don't pay critical role on KNL code path, so the memory
corruption wasn't causing any visible driver failures.
The easiest way of fixing it is to change NUM_CHANNELS to 6. Do that.
An alternative solution would be to restructure the KNL part of the
driver to 2MC/3channel representation.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anna Karbownik <anna.karbownik@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: jim.m.snow@intel.com
Cc: krzysztof.paliswiat@intel.com
Cc: lukasz.odzioba@intel.com
Cc: qiuxu.zhuo@intel.com
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Fixes: 3286d3eb90 ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4")
Link: http://lkml.kernel.org/r/1519312693-4789-1-git-send-email-anna.karbownik@intel.com
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Currently, bank 4 is reserved on Fam17h, so we chose not to initialize
bank 4 in the smca_banks array. This means that when we check if a bank
is initialized, like during boot or resume, we will see that bank 4 is
not initialized and try to initialize it.
This will cause a call trace, when resuming from suspend, due to
rdmsr_*on_cpu() calls in the init path. The rdmsr_*on_cpu() calls issue
an IPI but we're running with interrupts disabled. This triggers:
WARNING: CPU: 0 PID: 11523 at kernel/smp.c:291 smp_call_function_single+0xdc/0xe0
...
Reserved banks will be read-as-zero, so their MCA_IPID register will be
zero. So, like the smca_banks array, the threshold_banks array will not
have an entry for a reserved bank since all its MCA_MISC* registers will
be zero.
Enumerate a "Reserved" bank type that matches on a HWID_MCATYPE of 0,0.
Use the "Reserved" type when checking if a bank is reserved. It's
possible that other bank numbers may be reserved on future systems.
Don't try to find the block address on reserved banks.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 4.14.x
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180221101900.10326-7-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 PTI and Spectre related fixes and updates from Ingo Molnar:
"Here's the latest set of Spectre and PTI related fixes and updates:
Spectre:
- Add entry code register clearing to reduce the Spectre attack
surface
- Update the Spectre microcode blacklist
- Inline the KVM Spectre helpers to get close to v4.14 performance
again.
- Fix indirect_branch_prediction_barrier()
- Fix/improve Spectre related kernel messages
- Fix array_index_nospec_mask() asm constraint
- KVM: fix two MSR handling bugs
PTI:
- Fix a paranoid entry PTI CR3 handling bug
- Fix comments
objtool:
- Fix paranoid_entry() frame pointer warning
- Annotate WARN()-related UD2 as reachable
- Various fixes
- Add Add Peter Zijlstra as objtool co-maintainer
Misc:
- Various x86 entry code self-test fixes
- Improve/simplify entry code stack frame generation and handling
after recent heavy-handed PTI and Spectre changes. (There's two
more WIP improvements expected here.)
- Type fix for cache entries
There's also some low risk non-fix changes I've included in this
branch to reduce backporting conflicts:
- rename a confusing x86_cpu field name
- de-obfuscate the naming of single-TLB flushing primitives"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
x86/entry/64: Fix CR3 restore in paranoid_exit()
x86/cpu: Change type of x86_cache_size variable to unsigned int
x86/spectre: Fix an error message
x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping
selftests/x86/mpx: Fix incorrect bounds with old _sigfault
x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]()
x86/speculation: Add <asm/msr-index.h> dependency
nospec: Move array_index_nospec() parameter checking into separate macro
x86/speculation: Fix up array_index_nospec_mask() asm constraint
x86/debug: Use UD2 for WARN()
x86/debug, objtool: Annotate WARN()-related UD2 as reachable
objtool: Fix segfault in ignore_unreachable_insn()
selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems
selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c
selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c
selftests/x86: Fix build bug caused by the 5lvl test which has been moved to the VM directory
selftests/x86/pkeys: Remove unused functions
selftests/x86: Clean up and document sscanf() usage
selftests/x86: Fix vDSO selftest segfault for vsyscall=none
x86/entry/64: Remove the unused 'icebp' macro
...
x86_mask is a confusing name which is hard to associate with the
processor's stepping.
Additionally, correct an indent issue in lib/cpu.c.
Signed-off-by: Jia Zhang <qianyue.zj@alibaba-inc.com>
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We should not call edac_mc_del_mc() if a corresponding call to
edac_mc_add_mc() has not been performed yet.
So here, we should go to err instead of err2 to branch at the right
place of the error handling path.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180107205400.14068-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Borislav Petkov <bp@suse.de>
TI Keystone and DRA7xx SoCs have support for EDAC on DDR3 memory that can
correct one bit errors and detect two bit errors. Add EDAC driver for this
feature which plugs into the generic kernel EDAC framework.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-omap@vger.kernel.org
Link: http://lkml.kernel.org/r/1510578490-14510-1-git-send-email-t-kristo@ti.com
[ Add SPDX tag and make _emif_get_id() use edac_printk(). ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Fix an uninitialized variable warning in the Octeon EDAC driver, as seen
in MIPS cavium_octeon_defconfig builds since v4.14 with Codescape GNU
Tools 2016.05-03:
drivers/edac/octeon_edac-lmc.c In function ‘octeon_lmc_edac_poll_o2’:
drivers/edac/octeon_edac-lmc.c:87:24: warning: ‘((long unsigned int*)&int_reg)[1]’ may \
be used uninitialized in this function [-Wmaybe-uninitialized]
if (int_reg.s.sec_err || int_reg.s.ded_err) {
^
Iinitialise the whole int_reg variable to zero before the conditional
assignments in the error injection case.
Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Fixes: 1bc021e815 ("EDAC: Octeon: Add error injection support")
Link: http://lkml.kernel.org/r/20171113161206.20990-1-james.hogan@mips.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Summary of modules changes for the 4.15 merge window:
- Treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- Minor code cleanups
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8vb
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
Worth noting are the changes to ghes_edac to use a whitelist of
known-good platforms on which GHES error reporting works relatively
reliably. By Toshi Kani and Borislav Petkov.
-----BEGIN PGP SIGNATURE-----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=XEah
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"The usual pile of bugfixes, cleanups and minor driver enhancements.
Worth noting are the changes to ghes_edac to use a whitelist of
known-good platforms on which GHES error reporting works relatively
reliably. By Toshi Kani and Borislav Petkov"
* tag 'edac_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, sb_edac: Fix missing break in switch
MAINTAINERS: Split Cavium EDAC entry and add myself
EDAC, sb_edac: Fix missing DIMM sysfs entries with KNL SNC2/SNC4 mode
EDAC, skx_edac: Handle systems with segmented PCI busses
EDAC, thunderx: Remove suspend/resume support
EDAC, skx_edac: Fix detection of single-rank DIMMs
EDAC, sb_edac: Don't create a second memory controller if HA1 is not present
EDAC: Add owner check to the x86 platform drivers
EDAC: Add helper which returns the loaded platform driver
EDAC, ghes: Add platform check
EDAC, ghes: Model a single, logical memory controller
EDAC, ghes: Remove symbol exports
EDAC: Handle return value of kasprintf()
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:
@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@
module_param_call(_name, _set_func, _get_func, _arg, _mode);
@fix_set_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _set_func(
-_val_type _val
+const char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
@fix_get_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _get_func(
-_val_type _val
+char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:
drivers/platform/x86/thinkpad_acpi.c
fs/lockd/svc.c
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't currently harmful.
However, for some features it is necessary to instrument reads and
writes separately, which is not possible with ACCESS_ONCE(). This
distinction is critical to correct operation.
It's possible to transform the bulk of kernel code using the Coccinelle
script below. However, this doesn't handle comments, leaving references
to ACCESS_ONCE() instances which have been removed. As a preparatory
step, this patch converts the Altera EDAC code and comments to use
{READ,WRITE}_ONCE() consistently.
----
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-2-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add missing break statement in order to prevent the code from falling
through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20171016174029.GA19757@embeddedor.com
Signed-off-by: Borislav Petkov <bp@suse.de>
When figuring out the size of the DIMMs and the cluster mode is SNC2 or SNC4 the
current algorithm ignores the contribution of some of the channels resulting in
EDAC never knowing of the existence of some DIMMs attached to such channels (thus
sysfs is not populated).
Instead of selectively iterating from 0 to interlv_ways when looking for all the
participants in the interleave, do an exhaustive search and iterate from 0 to
KNL_MAX_CHANNELS. The algorithm is already smart enough to consider participants
only one time.
This works fine in all KNL cluster modes and even when there are missing DIMMs
as the contribution of those channels is 0.
Signed-off-by: Luis Felipe Sandoval Castro <luis.felipe.sandoval.castro@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: arozansk@redhat.com
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: qiuxu.zhuo@intel.com
Link: http://lkml.kernel.org/r/1506606882-90521-1-git-send-email-luis.felipe.sandoval.castro@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Large systems separate their PCI busses into segments since
the limit of only 256 PCI busses can be too restrictive.
Extend this driver to check whether <segment, bus-number> matches
when deciding how to group memory controller PCI devices to
CPU sockets.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Charles Rose <charles.rose@dell.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/f58abfd10bf73c8bc5adc1fe4de7408128b00625.1506358467.git.tony.luck@intel.com
[ Make skx_dev.seg an int. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
The memory controller on ThunderX/OcteonTX systems does not support
power management. Therefore remove the suspend/resume callbacks.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Jan Glauber <jglauber@cavium.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Zhangshaokun <zhangshaokun@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/20170925123502.17289-2-jglauber@cavium.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Single-rank DIMMs did not get detected on Skylake/Kabylake systems due
to wrong limit check. The single rank DIMM check is a simple typo. "0"
is a legal value in this field meaning single rank.
Signed-off-by: Charles Rose <charles.rose@dell.com>
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/66df72d327c265fbf92fe25df96daa228a35f076.1506358467.git.tony.luck@intel.com
[ Also fix debug message to print number of ranks. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
[ Expand commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Yi Zhang reported the following failure on a 2-socket Haswell (E5-2603v3)
server (DELL PowerEdge 730xd):
EDAC sbridge: Some needed devices are missing
EDAC MC: Removed device 0 for sb_edac.c Haswell SrcID#0_Ha#0: DEV 0000:7f:12.0
EDAC MC: Removed device 1 for sb_edac.c Haswell SrcID#1_Ha#0: DEV 0000:ff:12.0
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
The refactored sb_edac driver creates the IMC1 (the 2nd memory
controller) if any IMC1 device is present. In this case only
HA1_TA of IMC1 was present, but the driver expected to find
HA1/HA1_TM/HA1_TAD[0-3] devices too, leading to the above failure.
The document [1] says the 'E5-2603 v3' CPU has 4 memory channels max. Yi
Zhang inserted one DIMM per channel for each CPU, and did random error
address injection test with this patch:
4024 addresses fell in TOLM hole area
12715 addresses fell in CPU_SrcID#0_Ha#0_Chan#0_DIMM#0
12774 addresses fell in CPU_SrcID#0_Ha#0_Chan#1_DIMM#0
12798 addresses fell in CPU_SrcID#0_Ha#0_Chan#2_DIMM#0
12913 addresses fell in CPU_SrcID#0_Ha#0_Chan#3_DIMM#0
12674 addresses fell in CPU_SrcID#1_Ha#0_Chan#0_DIMM#0
12686 addresses fell in CPU_SrcID#1_Ha#0_Chan#1_DIMM#0
12882 addresses fell in CPU_SrcID#1_Ha#0_Chan#2_DIMM#0
12934 addresses fell in CPU_SrcID#1_Ha#0_Chan#3_DIMM#0
106400 addresses were injected totally.
The test result shows that all the 4 channels belong to IMC0 per CPU, so
the server really only has one IMC per CPU.
In the 1st page of chapter 2 in datasheet [2], it also says 'E5-2600 v3'
implements either one or two IMCs. For CPUs with one IMC, IMC1 is not
used and should be ignored.
Thus, do not create a second memory controller if the key HA1 is absent.
[1] http://ark.intel.com/products/83349/Intel-Xeon-Processor-E5-2603-v3-15M-Cache-1_60-GHz
[2] https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e5-v3-datasheet-vol-2.pdf
Reported-and-tested-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes: e2f747b1f4 ("EDAC, sb_edac: Assign EDAC memory controller per h/w controller")
Link: http://lkml.kernel.org/r/20170913104214.7325-1-qiuxu.zhuo@intel.com
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Change x86 EDAC platform drivers to verify the module owner at the
beginning of their module init functions. This allows them to fail their
init immediately when ghes_edac is enabled. Similar change can be made
to other edac drivers if necessary.
Also, remove ".c" from module names of pnp2_edac, sb_edac, and skx_edac.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170823225447.15608-6-toshi.kani@hpe.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Only a single EDAC platform driver can be loaded. When ghes_edac is
enabled, an EDAC platform driver still attempts to register itself and
fails in edac_mc_add_mc().
Add edac_get_owner() so that EDAC platform drivers can check the owner
first.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170823225447.15608-5-toshi.kani@hpe.com
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
The ghes_edac driver was introduced in 2013 [1], but it has not been
enabled by any distro yet. This driver obtains error info from firmware
interfaces (APEI), which are not properly implemented on many platforms,
as the driver says on load:
This EDAC driver relies on BIOS to enumerate memory and get error
reports. Unfortunately, not all BIOSes reflect the memory layout
correctly. So, the end result of using this driver varies from vendor
to vendor. If you find incorrect reports, please contact your hardware
vendor to correct its BIOS.
To get out from this situation, add a platform check to selectively
enable the driver on platforms that are known to have proper APEI
firmware implementation.
"ghes_edac.force_load=1" skips this platform check.
[1]: https://lkml.kernel.org/r/cover.1360931635.git.mchehab@redhat.com
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170823225447.15608-4-toshi.kani@hpe.com
Signed-off-by: Borislav Petkov <bp@suse.de>
We're enumerating the DIMMs through a DMI walk and since we can't get
any more detailed topological information about which DIMMs belong to
which memory controller, convert it to a single, logical controller
which contains all the DIMMs.
The error reporting path from GHES ghes_edac_report_mem_error() doesn't
get called in NMI context but add a warning about it to catch any
changes in the future as if so, our locking scheme will be insufficient
then.
Signed-off-by: Borislav Petkov <bp@suse.de>
kasprintf() can fail and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: linux-edac@vger.kernel.org
[ Merged into a single patch, small formatting fixups. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
struct mce.cpuid contains CPUID(1).EAX which contains family, model and
stepping and thus has enough information for our purposes. Thus get rid
of some external dependencies which are not really needed.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Make these const as they are only stored in the type field of a device
structure, which is const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1503130946-2854-2-git-send-email-bhumirks@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
On Deverton server, the P2SB PCI device (DEV:1F, FUN:1) is used by multiple
device drivers.
If it's hidden by some device driver (e.g. with the i801 I2C driver,
the commit
9424693035 ("i2c: i801: Create iTCO device on newer Intel PCHs")
unconditionally hid the P2SB PCI device wrongly) it will make the
pnd2_edac driver read out an invalid BAR value of 0xffffffff and then
fail on ioremap().
Therefore, store the presence state of P2SB PCI device before unhiding
it for reading BAR and restore the presence state after reading BAR.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-i2c@vger.kernel.org
Link: http://lkml.kernel.org/r/20170814154845.21663-1-qiuxu.zhuo@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Bit[0] of BAR is always zero. Bit[2:1] and bit[3] of BAR contain the
information of 'type' and the 'prefetchable' accordingly. Therefore,
mask the lower four bits to retrieve the actual base address of a BAR.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170814154813.21619-1-qiuxu.zhuo@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
I've been waing a long time for the generic sideband driver to
appear. Patience has run out, so include the minimum here to
just read registers.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Patrick Geary <patrickg@supermicro.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170803210536.5662-1-tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Basically, there are full memory mirroring and address range partial
memory mirroring (supported by Haswell EX and Broadwell EX) modes.
a) In full memory mirroring, the memory behind each memory controller
is mirrored, i.e. the memory is split into two identical mirrors
(primary and secondary), half of the memory is reserved for redundancy.
b) In address range partial memory mirroring, the memory size (range)
of primary and secondary behind each memory controller can be user
defined by the TAD0 register. The rest of memory ranges defined by
TAD1/TAD2/... in that memory controller are non-mirrored.
For more detail on memory mirroring, see the following link written by Tony Luck:
https://01.org/lkp/blogs/tonyluck/2016/address-range-partial-memory-mirroring-linux
Currently the sb_edac driver only supports address decoding in full
memory mirroring and non-mirroring modes. In address range partial
memory mirroring mode, it may fail to decode an address that falls in a
non-mirroring area (the following was one of this kind of failed logs).
mce: Uncorrected hardware memory error in user-access at 566d53a400
Memory failure: 0x566d53a: Killing einj_mem_uc:4647 due to hardware memory corruption
Memory failure: 0x566d53a: recovery action for dirty LRU page: Recovered
mce: [Hardware Error]: Machine check events logged
EDAC sbridge MC1: HANDLING MCE MEMORY ERROR
EDAC sbridge MC1: CPU 48: Machine Check Event: 0 Bank 7: ec00000000010090
EDAC sbridge MC1: TSC 4b914aa5a99dab
EDAC sbridge MC1: ADDR 566d53a400
EDAC sbridge MC1: MISC 1443a0c86
EDAC sbridge MC1: PROCESSOR 0:406f1 TIME 1499712764 SOCKET 2 APIC 80
EDAC MC1: 0 UE Can't discover the memory rank for ch addr 0x7fb54e900 on any memory ( page:0x0 offset:0x0 grain:32)
mce: [Hardware Error]: Machine check events logged
Therefore, classify memory mirroring modes and make the address decoding
in address range partial memory mode correct.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170730180651.30060-1-qiuxu.zhuo@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing of
the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170718214339.7774-19-robh@kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
It is a write-only variable so get rid of it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Thor Thayer <thor.thayer@linux.intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Loc Ho <lho@apm.com>
Cc: linux-edac@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Using the homegrown amd_get_nb_id() to find a node ID on AMD was fine
while the L3 to node mapping was 1:1. And Zen topology broke this. So
let's start slowly moving away from it and use the topology interfaces
instead.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1490041614-90057-2-git-send-email-Yazen.Ghannam@amd.com
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Non-existent or empty DIMM slots result in error return from
RD_REGP(). But we shouldn't give up on failure.
So long as we find at least one DIMM we can continue.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170628234407.21521-1-tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The function sbi_send() is local to just pnd2_edac.c and does not need
to be in global scope, so make it static.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170623084855.9197-1-colin.king@canonical.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Add code comment to make it clear that the fall-through is intentional
and, OR ret with its previous value to avoid overwriting it so that
callers can check the correct return value.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170622220535.GA4896@embeddedgus
[ Massage a bit. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Use of_address_to_resource() and resource_size() instead of manually
parsing the "reg" property from the "memory" node(s).
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170606235500.22772-3-chris.packham@alliedtelesis.co.nz
Signed-off-by: Borislav Petkov <bp@suse.de>
Xiaolong Ye reported the following failure on Broadwell D server:
EDAC sbridge: Some needed devices are missing
EDAC MC: Removed device 0 for sbridge_edac.c Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
Broadwell D (only IMC0 per socket) and Broadwell X (IMC0 and IMC1 per
socket) use the same PCI device IDs for IMC0 per socket, then they
share pci_dev_descr_broadwell_table (n_imcs_per_sock=2). In this case,
Broadwell D wrongly creates the nonexistent SOCK EDAC memory controller
and reports above error messages, since it has no IMC1 per socket.
Avoid creating the nonexistent SOCK memory controller.
Reported-and-tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170608113351.25323-1-qiuxu.zhuo@intel.com
[ Massage. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
edac_op_state is a module parameter which affects the behaviour of
the driver probe which can potentially be invoked as soon as the
platform driver registration happens. Because of this we need to
ensure that we sanity check the module parameter before calling
platform_register_drivers().
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170607215530.8604-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Borislav Petkov <bp@suse.de>
Compare the number of debugfs entries created by
thunderx_create_debugfs_nodes() with the requested number of entries to
properly determine whether to print a warning.
Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@caviumnetworks.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/20170531155157.93583-1-stemerkhanov@cavium.com
Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Check the return status of platform_driver_register() in
mv64x60_edac_init(). Only output messages and initialise the
edac_op_state if the registration is successful.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170529212142.25572-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Borislav Petkov <bp@suse.de>
Kaby Lake seems to work just like Skylake.
Reported-and-tested-by: Doug Thompson <bc.tdw@recursor.net>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1495823683-32569-1-git-send-email-jbaron@akamai.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Collapse 'case:' in *_mci_bind_devs() and update driver version from
1.1.1 to 1.1.2.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000934.87971-1-qiuxu.zhuo@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
This is based on previous work by Patrick Geary, see Link.
Additional cleanups ontop:
- Remove the code to read MCMTR from pci_ha1_ta and CHN_TO_HA macro,
now that TA0 and TA1 are unified.
- Remove get_pdev_same_bus(), since in get_dimm_config() the
variable "pvt->pci_ta" for KNL is also ready, we can simply use
pci_read_config_dword(pvt->pci_ta, KNL_MCMTR, &pvt->info.mcmtr) to read
MCMTR.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/57884350.1030401@supermicro.com
Link: http://lkml.kernel.org/r/20170523000910.87925-1-qiuxu.zhuo@intel.com
[ Make __populate_dimms() return int. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
We don't need this quirk anymore now that the EDAC memory controller
representation matches the hardware.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000834.87881-1-qiuxu.zhuo@intel.com
[ Commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Tony pointed out: "currently the driver pretends there is one big
8-channel memory controller per socket instead of 2 4-channel
controllers. This is fine with all memory controller populated with
symmetrical DIMM configurations, but runs into difficulties on
asymmetrical setups".
Restructure the driver to assign an EDAC memory controller to each real
h/w memory controller to resolve the issue.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000731.87793-1-qiuxu.zhuo@intel.com
[ Break some lines at convenient points. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
EDAC assigns logical memory controller numbers in the order that we find
memory controllers, which depends on which PCI bus they are on. Some
systems end up with MC0 on socket0, others (e.g Haswell) have MC0 on
socket3.
All this is made more confusing for users because we use the string
"Socket" while generating names for memory controllers, but the number
that we attach there is the memory controller number. E.g.
EDAC MC0: Giving out device to module sbridge_edac.c controller
Haswell Socket#0: DEV 0000:ff:12.0 (INTERRUPT)
Change the names to say "SrcID#%d" (where the number we use is read from
the h/w associated with the memory controller instead of some logical
number internal to the EDAC driver). New message:
EDAC MC0: Giving out device to module sbridge_edac.c controller
Haswell SrcID#3: DEV 0000:ff:12.0 (INTERRUPT)
Reported-by: Andrey Korolyov <andrey@xdel.ru>
Reported-by: Patrick Geary <patrickg@supermicro.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000603.87748-1-qiuxu.zhuo@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Each of the PCI device IDs belongs to a CPU socket, or to one of the
integrated memory controllers. Provide an enum to specify the domain of
each, and distinguish the resource number in each domain: the number
of the PCI device IDs per integrated memory controller/socket, and the
number of integrated memory controllers per socket.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000533.87704-1-qiuxu.zhuo@intel.com
[ Realign pci_dev_descr_knl members. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
struct irq_domain_ops is not modified, so it can be made const.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: Thor Thayer <thor.thayer@linux.intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170524133505.1233-1-tklauser@distanz.ch
Signed-off-by: Borislav Petkov <bp@suse.de>
The wrong index into the csbases/csmasks arrays was being passed to
the function to compute the chip select sizes, which resulted in the
wrong size being computed. Address that so that the correct values are
computed and printed.
Also, redo how we calculate the number of pages in a CS row.
Reported-by: Benjamin Bennett <benbennett@gmail.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: <stable@vger.kernel.org> # 4.10.x
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1493313114-11260-1-git-send-email-Yazen.Ghannam@amd.com
[ Remove unneeded integer math comment, minor cleanups. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Leave it to the user to decide whether to enable this or not. Otherwise,
platform-specific drivers won't initialize (currently, EDAC supports
only a single platform driver loaded).
Signed-off-by: Borislav Petkov <bp@suse.de>
Move all the EDAC core functionality behind CONFIG_EDAC and get rid of
that indirection. Update defconfigs which had it.
While at it, fix dependencies such that EDAC depends on RAS for the
tracepoints.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-edac@vger.kernel.org
Use mc_devices list instead to check whether we have EDAC driver
instances successfully registered with EDAC core.
Signed-off-by: Borislav Petkov <bp@suse.de>
Apparently, some machines used to report DRAM errors through a PCI SERR
NMI. This is why we have a call into EDAC in the NMI handler. See
c0d1217202 ("drivers/edac: add new nmi rescan").
From looking at the patch above, that's two drivers: e752x_edac.c and
e7xxx_edac.c. Now, I wanna say those are old machines which are probably
decommissioned already.
Tony says that "[t]the newest CPU supported by either of those drivers
is the Xeon E7520 (a.k.a. "Nehalem") released in Q1'2010. Possibly some
folks are still using these ... but people that hold onto h/w for 7
years generally cling to old s/w too ... so I'd guess it unlikely that
we will get complaints for breaking these in upstream."
So even if there is a small number still in use, we did load EDAC with
edac_op_state == EDAC_OPSTATE_POLL by default (we still do, in fact)
which means a default EDAC setup without any parameters supplied on the
command line or otherwise would never even log the error in the NMI
handler because we're polling by default:
inline int edac_handler_set(void)
{
if (edac_op_state == EDAC_OPSTATE_POLL)
return 0;
return atomic_read(&edac_handlers);
}
So, long story short, I'd like to get rid of that nastiness called
edac_stub.c and confine all the EDAC drivers solely to drivers/edac/. If
we ever have to do stuff like that again, it should be notifiers we're
using and not some insanity like this one.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
The peripherals' RAS functionality only exist on the Arria10 SoCFPGA.
The Cyclone5 initialization generates EDAC warnings when the peripherals
aren't found in the device tree. Fix by checking for Arria10 in the init
functions.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1491415262-5018-1-git-send-email-thor.thayer@linux.intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
DIMM number passed to edac_mc_handle_error() was accidentally hardcoded
to zero. Pass in the correct daddr->dimm value.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Provide debugfs function stubs when EDAC_DEBUG is not enabled so that we
don't fail the build:
drivers/edac/pnd2_edac.c: In function ‘pnd2_init’:
drivers/edac/pnd2_edac.c:1521:2: error: implicit declaration of function ‘setup_pnd2_debug’ [-Werror=implicit-function-declaration]
setup_pnd2_debug();
^
drivers/edac/pnd2_edac.c: In function ‘pnd2_exit’:
drivers/edac/pnd2_edac.c:1529:2: error: implicit declaration of function ‘teardown_pnd2_debug’ [-Werror=implicit-function-declaration]
teardown_pnd2_debug();
^
Signed-off-by: Borislav Petkov <bp@suse.de>
Initial target for this driver is the Intel Apollo Lake platform and
Denverton micro-server, they use the same internal memory controller IP
called Pondicherry2.
Memory controller registers are not in PCI config space like earlier
Intel memory controllers. For Apollo Lake platform they are accessed via
a "side-band" interface, for Denverton micro-server they are access via
PCI config space and memory map I/O. This driver is for Apollo Lake and
Denverton, but only the Denverton is fully enabled while we wait for the
sideband driver.
Apollo lake driver and initial cut at Denverton driver by Tony Luck.
Extensive cleanup, refactoring and basic verification by Qiuxu Zhuo.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170308174539.14432-1-qiuxu.zhuo@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The MTR_DRAM_WIDTH macro returns the data width. It is sometimes used
as if it returned a boolean true if the width if 8. Fix the tests where
MTR_DRAM_WIDTH is misused.
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170309011809.8340-1-jeremy.lefaure@lse.epita.fr
Signed-off-by: Borislav Petkov <bp@suse.de>
Fix spelling mistake in dev_err message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Loc Ho <lho@apm.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170223002609.9440-1-colin.king@canonical.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Pull RAS updates from Ingo Molnar:
"The main changes in this cycle were:
- Assign notifier chain priorities for all RAS related handlers to
make the ordering explicit (Borislav Petkov)
- Improve the AMD MCA banks sysfs output (Yazen Ghannam)
- Various cleanups and restructuring of the x86 RAS code (Borislav
Petkov)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ras, EDAC, acpi: Assign MCE notifier handlers a priority
x86/ras: Get rid of mce_process_work()
EDAC/mce/amd: Dump TSC value
EDAC/mce/amd: Unexport amd_decode_mce()
x86/ras/amd/inj: Change dependency
x86/ras: Flip the TSC-adding logic
x86/ras/amd: Make sysfs names of banks more user-friendly
x86/ras/therm_throt: Do not log a fake MCE for thermal events
x86/ras/inject: Make it depend on X86_LOCAL_APIC=y
Currently, the IPID and Syndrome are printed on the same line as the
Address. There are cases when we can have a valid Syndrome but not a
valid Address.
For example, the MCA_SYND register can be used to hold more detailed
error info that the hardware folks can use. It's not just DRAM ECC
syndromes. There are some error types that aren't related to memory that
may have valid syndromes, like some errors related to links in the Data
Fabric, etc.
In these cases, the IPID and Syndrome are not printed at the same log
level as the rest of the stanza, so users won't see them on the console.
Console:
[Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b
[Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2
Dmesg:
[Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b
, Syndrome: 0x000000010b404000, IPID: 0x0001002e00000002
[Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2
Print the IPID first and on a new line. The IPID should always be
printed on SMCA systems. The Syndrome will then be printed with the IPID
and at the same log level when valid:
[Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b
[Hardware Error]: IPID: 0x0001002e00000002, Syndrome: 0x000000010b404000
[Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1487192182-2474-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Last time we did that was when we enabled Bulldozer. Now, we enabled Zen
so it is only natural ... :-)
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Fix the following sparse warnings:
drivers/edac/fsl_ddr_edac.c:148:1: warning:
symbol 'dev_attr_inject_data_hi' was not declared. Should it be static?
drivers/edac/fsl_ddr_edac.c:150:1: warning:
symbol 'dev_attr_inject_data_lo' was not declared. Should it be static?
drivers/edac/fsl_ddr_edac.c:152:1: warning:
symbol 'dev_attr_inject_ctrl' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170209150424.15124-1-weiyj.lk@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The L2 cache controller on the T2080 SoC has similar capabilities to the
others already supported by the mpc85xx_edac driver. Add it to the list
of compatible devices.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: devicetree@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170201231624.28843-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Borislav Petkov <bp@suse.de>
Match one of the devices in amd64_cpuids[] before loading the module.
This is an additional sanity check against users trying to load
amd64_edac_mod on unsupported systems.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1485537863-2707-9-git-send-email-Yazen.Ghannam@amd.com
[ Get rid of err_ret label, make it a bit more readable this way. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Having ECC disabled on a node doesn't necessarily mean that it's
disabled for the entire system. So let's return a non-failing code when
ECC is disabled on a node. This way we can skip initialization for the
node but still continue with the remaining nodes.
After probing all instances, make sure we have at least one MC device
allocated.
This issue is seen and fix tested on Fam15h and Fam17h MCM systems.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1485537863-2707-8-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Print the node number when informing that DRAM ECC is disabled so
that we can show which nodes have DRAM ECC disabled. Also, print more
detailed system information as edac_dbg(), so as to not bother general
users.
Switch amd64_notice to amd64_info to match the message above it.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1485537863-2707-5-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
We have a few functions that register/unregister an ECC error decoding
routine. These functions are called when we init/remove instances.
However, they are global and so don't need to be registered/unregistered
multiple times.
So move them out of the init/remove instance functions and into the
module init/exit routines.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1485297149-13733-4-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Users may not be familiar with the concept of deferred errors. There is
no action for users to take on this type of error, so give more context
in the error message to make this more clear.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1485297149-13733-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
REDMEMB[17] is the ECC_Locator bit, which, when set, identifies the
CS[3:2] as the simbols in error. And thus the second channel.
The macro computing it was wrong so get rid of it (it was used at one
place only) and get rid of the conditional too. Generates better code
this way anyway.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reported-by: David Binderman <dcb314@hotmail.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Assign all notifiers on the MCE decode chain a priority so that they get
called in the correct order.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170123183514.13356-10-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dump the TSC value of the time when the MCE got logged.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170123183514.13356-8-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is not used outside of the driver anymore.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170123183514.13356-7-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Function sbridge_register_mci() sets pvt->info.show_interleave_mode
to knl_show_interleave_mode() on Knight's Landing and
show_interleave_mode() anywhere else.
Merge show_interleave_mode() and knl_show_interleave_mode() in a single
implementation and use it without an indirect function pointer.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170122172806.10412-1-nicolas.iooss_linux@m4x.org
[ Call it get_intlv_mode_str(). ]
Signed-off-by: Borislav Petkov <bp@suse.de>
The old csrowX sysfs directories have per-csrow error counters, but the
new dimmX directories do not currently expose error counts.
EDAC already keeps these counts, add them to sysfs so per-DIMM counts
are still available when CONFIG_EDAC_LEGACY_SYSFS=n.
Signed-off-by: Aaron Miller <aaronmiller@fb.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20161103220153.3997328-1-aaronmiller@fb.com
Signed-off-by: Borislav Petkov <bp@suse.de>
We should save the return code from probe_one_instance() so that it can
be returned from the module init function. Otherwise, we'll be returning
the -ENOMEM from above.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1484322741-41884-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
If ioremap_nocache() fails, it will return NULL. Which will then cause a
NULL-pointer dereference. Handle the returned value properly.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1484549092-11349-1-git-send-email-arvind.yadav.cs@gmail.com
[ Boris: massage commit message and improve error message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
The dev_attr_sdram_scrub_rate is not declared in a header or used
anywhere else, so make it static to fix the following warning:
drivers/edac/edac_mc_sysfs.c:816:1: warning: symbol
'dev_attr_sdram_scrub_rate' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1465407356-7357-1-git-send-email-ben.dooks@codethink.co.uk
Signed-off-by: Borislav Petkov <bp@suse.de>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some kernel-doc tags don't provide good descriptions or use
a different style. Adjust them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently, there's no device driver documentation for the EDAC
subsystem at the driver-api book. Fill in the blanks for the
structures and functions that misses documentation, uniform
the word on the existing ones, and add a new edac.rst file at
driver-api, in order to document the EDAC subsystem.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several functions are documented at edac_mc.c.
As we'll be including edac_core.h at drivers-api book, move
those, in order for the kernel-doc markups be part of the API
documentation book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several functions are documented at edac_pci.c and edac_pci_sysfs.c.
As we'll be including edac_pci.h at drivers-api book, move those,
in order for the kernel-doc markups be part of the API
documentation book.
As several of those kernel-doc macros are not in the right format,
fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several functions are documented at edac_device.c.
As we'll be including edac_core.h at drivers-api book, move those,
in order for the kernel-doc markups be part of the API
documentation book.
As several of those kernel-doc macros are not in the right format,
fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The edac_core.h header contain data structures and function
definitions for both EDAC MC and EDAC device.
Let's move the devices ones to a separate header file, as part
of a header reorganization.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The edac_core.h header contain data structures and function
definitions for the 3 parts of EDAC: MC, PCI and device.
Let's move the PCI ones to a separate header file, as part
of a header reorganization.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Prefix the warn and error macros with the respective string so that
callers don't have to say "Error" or "Warning". We save us string length
this way in the actual calls.
While at it, shorten the calls in reserve_mc_sibling_devs().
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
How we need to decode UMC errors is different from how we decode bus
errors, so let's define a new function for this. We also need a way to
determine the UMC channel since we're not guaranteed that there is a
fixed relation between channel and MCA bank.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1480359593-80369-1-git-send-email-Yazen.Ghannam@amd.com
[ Fold in decode_synd_reg(), simplify. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
We need to determine the EDAC capabilities from all UMCs on the node. We
should only check UMCs that are enabled and make sure they all agree.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-15-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The UMCs on Fam17h are independent memory controllers so we need to
read the capabilities from all UMCs and make sure they agree. Once
we determine what capabilities are available we should save them for
convenience.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1480431116-94683-1-git-send-email-Yazen.Ghannam@amd.com
[ Simplify f17h_determine_edac_ctl_cap(), preinit edac_mode in init_csrows(). ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Read a few more UMC registers and provide debug output in order to be as
similar as possible to older AMD systems.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1480344621-14966-1-git-send-email-Yazen.Ghannam@amd.com
[ Remove unneeded K8 check and comments, fixup others. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Fam17h has new register offsets and fields for setting up the DRAM
scrubber so add support for this.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-17-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
MCA_STATUS[43] has been defined as "Poison" or "Reserved" for every bank
since Fam15h except for Fam15h, bank 4 in which case it's defined as
part of the McaStatSubCache bitfield.
Filter out that case.
Reported-by: Dean Liberty <Dean.Liberty@amd.com>
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1479478222-19896-1-git-send-email-Yazen.Ghannam@amd.com
[ Split an almost unparseable ternary conditional, add a comment. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Fam17h has a different set of registers and bitfields. Most of these
registers are read through SMN (System Management Network) rather
than PCI config space. Also, the derivation of various values is now
different.
Update amd64_edac to read the appropriate registers and extract the
correct values for Fam17h.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-12-git-send-email-Yazen.Ghannam@amd.com
[ Save us the indentation level in read_mc_regs(), add defines ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Fam17h needs PCI device functions 0 and 6 instead of 1 and 2 as on older
systems. Update struct amd64_pvt to hold the new functions and reserve
them if on Fam17h.
Also, allocate an array of UMC structs within our newly allocated PVT
struct.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-11-git-send-email-Yazen.Ghannam@amd.com
[ init_one_instance() error handling, shorten lines, unbreak >80 cols lines. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Add a family type and associated ops for Fam17h. Define a struct to hold
all the UMC registers that we need. Make this a part of struct amd64_pvt
in order to maximize code reuse in the rest of the driver.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-10-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Update the ecc_enabled() function to work on Fam17h. This entails
reading a different set of registers and using the SMN (System
Management Network) rather than PCI devices.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-9-git-send-email-Yazen.Ghannam@amd.com
[ Fixup ecc_en assignment and get_umc_base(). ]
Signed-off-by: Borislav Petkov <bp@suse.de>
tip:ras/core contains the respective Fam17h x86 RAS bits which
amd64_edac is going to use. So merge it into the EDAC branch.
Signed-off-by: Borislav Petkov <bp@suse.de>
It's not recommended for the OS to try and force-enable ECC checking.
This is considered a firmware task since it includes memory training,
etc, so don't change ECC settings on Fam17h or newer systems and inform
the user.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1479850816-1595-1-git-send-email-Yazen.Ghannam@amd.com
[ Put the "forcing" message in an else branch. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Currently, deferred errors are classified as correctable in EDAC. Add a
new error type for deferred errors so that they are correctly reported
to the user.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-7-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
We only use __log_bus_error() to log DRAM ECC errors, so let's change
the name to reflect this. We'll also use this function for DRAM ECC
errors on Fam17h, but we'll call it from a different function than
decode_bus_error().
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-6-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
AMD Fam17h will not be using PCI function 2 for EDAC, but will continue
to use function 3. So let's get the name of F3 instead of F2 to support
Fam17h and previous families.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-5-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
nb_bus_decoder() is only used for DRAM ECC errors so rename it so that
the name is more generic and descriptive.
Also, call it for DRAM ECC errors on SMCA systems.
[ Boris: rename it to real function name with a verb in it. ]
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-4-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
If we execute the below steps without this patch:
modprobe mpc85xx_edac [The first insmod, everything is well.]
modprobe -r mpc85xx_edac
modprobe mpc85xx_edac [insmod again, error happens.]
We would get the error messages as below:
BUG: recent printk recursion!
Oops: Kernel access of bad area, sig: 11 [#48]
Modules linked in: mpc85xx_edac edac_core softdog [last unloaded: mpc85xx_edac]
CPU: 5 PID: 14773 Comm: modprobe Tainted: G D C 4.8.3-rt2
.vsnprintf
.vscnprintf
.vprintk_emit
.printk
.edac_pci_add_device
.mpc85xx_pci_err_probe
.platform_drv_probe
.driver_probe_device
.__driver_attach
.bus_for_each_dev
.driver_attach
.bus_add_driver
.driver_register
.__platform_register_drivers
.mpc85xx_mc_init
.do_one_initcall
.do_init_module
.load_module
.SyS_finit_module
system_call
Address this by cleaning up properly when removing the platform driver.
Tested on a T4240QDS board.
Signed-off-by: Yanjiang Jin <yanjiang.jin@windriver.com>
Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: york.sun@nxp.com
Link: http://lkml.kernel.org/r/1479351380-17109-2-git-send-email-yanjiang.jin@windriver.com
[ Boris: massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Trivial fix to spelling mistake "Mutilple" to "Multiple" in error
messages.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Loc Ho <lho@apm.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20161114231104.5585-1-colin.king@canonical.com
Signed-off-by: Borislav Petkov <bp@suse.de>
When accessing the mc_devices list of memory controller descriptors, we
need to hold mem_ctls_mutex. This was not always the case, fix that.
Make all external callers call a version which grabs the mutex since the
last is local to edac_mc.c.
Reported-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Add accessor functions and hide the smca_names array. Also, add a
sanity-check to bank HWID assignment in get_smca_bank_info().
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20161104152317.5r276t35df53qk76@pd.tnic
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make it differ more from struct smca_bank_name for better readability.
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: http://lkml.kernel.org/r/20161103125556.15482-3-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Call it simply smca_hwid and call local variables "hwid". More readable.
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: http://lkml.kernel.org/r/20161103125556.15482-2-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Disable IRQs while injecting SDRAM errors. The RT patches exposed
a spinlock deadlock where the spinlock taken for the regmap write
deadlocked with the IRQ clear regmap write.
Error injection is not normally enabled for ECC but only for testing.
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1476906827-9412-1-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Fix the following sparse warnings:
drivers/edac/skx_edac.c:266:25: warning:
symbol 'skx_cpuids' was not declared. Should it be static?
drivers/edac/skx_edac.c:1040:12: warning:
symbol 'skx_init' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1477147098-2842-1-git-send-email-weiyj.lk@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Add Knights Mill (KNM) to the list of CPU models supported by sb_edac.
Signed-off-by: Piotr Luc <piotr.luc@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20161013153105.2517-6-piotr.luc@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
We now have symbolic names for a bunch of Intel CPU models via
asm/intel-family.h. The original conversion missed the EDAC drivers.
Convert them.
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20160929204321.9FAE5F84@viggo.jf.intel.com
[ Remove comment, macro name is descriptive enough. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
buffers (Thor Thayer)
* Split the memory controller part out of mpc85xx and share it with a
* new Freescale ARM Layerscape driver (York Sun)
* amd64_edac fixes (Yazen Ghannam)
* Misc cleanups, refactoring and fixes all over the place
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pcI8
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"A lot of movement in the EDAC tree this time around, coarse summary
below:
- Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO
buffers (Thor Thayer)
- split the memory controller part out of mpc85xx and share it with a
new Freescale ARM Layerscape driver (York Sun)
- amd64_edac fixes (Yazen Ghannam)
- misc cleanups, refactoring and fixes all over the place"
* tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (37 commits)
EDAC, altera: Add IRQ Flags to disable IRQ while handling
EDAC, altera: Correct EDAC IRQ error message
EDAC, amd64: Autoload module using x86_cpu_id
EDAC, sb_edac: Remove NULL pointer check on array pci_tad
EDAC: Remove NO_IRQ from powerpc-only drivers
EDAC, fsl_ddr: Fix error return code in fsl_mc_err_probe()
EDAC, fsl_ddr: Add entry to MAINTAINERS
EDAC: Move Doug Thompson to CREDITS
EDAC, I3000: Orphan driver
EDAC, fsl_ddr: Replace simple_strtoul() with kstrtoul()
EDAC, layerscape: Add Layerscape EDAC support
EDAC, fsl_ddr: Fix IRQ dispose warning when module is removed
EDAC, fsl_ddr: Add support for little endian
EDAC, fsl_ddr: Add missing DDR DRAM types
EDAC, fsl_ddr: Rename macros and names
EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx
EDAC, mpc85xx: Replace printk() with pr_* format
EDAC, mpc85xx: Drop setting/clearing RFXE bit in HID1
EDAC, altera: Rename MC trigger to common name
EDAC, altera: Rename device trigger to common name
...
Add the IRQF_ONESHOT and IRQF_TRIGGER_HIGH flags to disable the IRQ
while executing the IRQ handler. Remove the IRQF_SHARED because these
are not shared IRQs in the domain. Exposed when flooding IRQs.
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1474582419-7053-2-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Bank 4 is reserved on family 0x17 and shouldn't generate any MCE
records. However, broken hardware and software is not something unheard
of so warn about bank 4 errors. They shouldn't be coming from bank 4
naturally but users can still use mce_amd_inj to simulate errors from it
for testing purposed.
Also, avoid special handling in the injector mce_amd_inj like it is
being done on the older families.
[ bp: Rewrite commit message and merge into one patch. Use boot_cpu_data. ]
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Link: http://lkml.kernel.org/r/1473384591-5323-1-git-send-email-Yazen.Ghannam@amd.com
Link: http://lkml.kernel.org/r/1473384591-5323-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The MCA_SYND and MCA_IPID registers contain valuable information and
should be included in MCE output. The MCA_SYND register contains
syndrome and other error information, and the MCA_IPID register will
uniquely identify the MCA bank's type without having to rely on system
software.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472680624-34221-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Scalable MCA defines a number of IP types. An MCA bank on an SMCA
system is defined as one of these IP types. A bank's type is uniquely
identified by the combination of the HWID and MCATYPE values read from
its MCA_IPID register.
Add the required tables in order to be able to lookup error descriptions
based on a bank's type and the error's extended error code.
[ bp: Align comments, simplify a bit. ]
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472741832-1690-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The error descriptions defined for Fam17h can be reused for other SMCA
systems, so their names should reflect this.
Change f17h prefix to smca for error descriptions.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472673994-12235-4-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Print SyndV bit status and print the raw value of the MCA_SYND register.
Further decoding of the syndrome from struct mce.synd can be done in
other places where appropriate, e.g. DRAM ECC.
Boris: make the error stanza more compact by putting the error address
and syndrome on the same line:
[Hardware Error]: Corrected error, no action required.
[Hardware Error]: CPU:2 (17:0:0) MC4_STATUS[-|CE|-|PCC|AddrV|-|-|SyndV|CECC]: 0x96204100001e0117
[Hardware Error]: Error Addr: 0x000000007f4c52e3, Syndrome: 0x0000000000000000
[Hardware Error]: Invalid IP block specified.
[Hardware Error]: cache level: L3/GEN, tx: DATA, mem-tx: RD
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1467633035-32080-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
pvt->pci_tad is a NUM_CHANNELS array of struct pci_dev pointers and
hence cannot be NULL, so the NULL pointer check on pci_tad is redundant.
Remove it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20160908083801.14766-1-colin.king@canonical.com
Signed-off-by: Borislav Petkov <bp@suse.de>
We'd like to eventually remove NO_IRQ on powerpc, so remove usages of it
from powerpc-only drivers.
The pdata structs are kzalloc'ed, so we don't need to initialise those
to 0, we can just drop the assignments entirely.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Johannes Thumshirn <morbidrsa@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/1473674436-19467-1-git-send-email-mpe@ellerman.id.au
Signed-off-by: Borislav Petkov <bp@suse.de>
Return negative error code from the edac_mc_add_mc() error handling case
instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: York Sun <york.sun@nxp.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1473350284-26482-1-git-send-email-weiyj.lk@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The compatible DDR controllers may support DDR, DDR2, DDR3, DDR4 DRAM.
An individual controller doesn't support all of them. The EDAC driver
reads SDRAM_CFG to determine which mode is configured.
Add DDR4 and drop the defines used only in the mtype assignment.
Signed-off-by: York Sun <york.sun@nxp.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: morbidrsa@gmail.com
Cc: oss@buserror.net
Cc: stuart.yoder@nxp.com
Link: http://lkml.kernel.org/r/1470779760-16483-6-git-send-email-york.sun@nxp.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The mpc85xx-compatible DDR controllers are used on ARM-based SoCs too.
Carve out the DDR part from the mpc85xx EDAC driver in preparation to
support both architectures.
Signed-off-by: York Sun <york.sun@nxp.com>
Cc: Johannes Thumshirn <morbidrsa@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: oss@buserror.net
Cc: stuart.yoder@nxp.com
Link: http://lkml.kernel.org/r/1470946525-3410-1-git-send-email-york.sun@nxp.com
Signed-off-by: Borislav Petkov <bp@suse.de>
On e500v1, read fault exception enable (RFXE) controls whether assertion
of core_fault_in causes a machine check interrupt. Assertion of
core_fault_in can result from uncorrectable data error, such as an L2
multi-bit ECC error. It can also occur from a system error if logic on
the integrated device signals a fault for nonfatal errors. RFXE bit is
cleared out of reset, and should be left clear for normal operation.
Assertion of core_fault_in does not cause a machine check.
RFXE is set specifically for RIO (Rapid IO) and PCI for book E to catch
the errors by machine check. With this bit set, the EDAC driver can't
get the interrupt in case of uncorrectable error. So this bit is cleared
in favor of EDAC. However, the benefit of catching such uncorrectable
error doesn't outweigh the other errors which may hang the system.
Besides, e500v2 has different errors masked by RFXE, and e500mc doesn't
support this bit. It is more reasonable to leave RFXE as is in the EDAC
driver, and leave the uncorrectable errors triggering machine check for
e500v1.
Suggested-by: Scott Wood <oss@buserror.net>
Signed-off-by: York Sun <york.sun@nxp.com>
Cc: Johannes Thumshirn <morbidrsa@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: oss@buserror.net
Cc: stuart.yoder@nxp.com
Link: http://lkml.kernel.org/r/1470779760-16483-2-git-send-email-york.sun@nxp.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The L2 and OCRAM devices have different ecc trigger names than the other
EDAC devices (FIFO peripherals). Make them all the same and remove the
character array from the device structure.
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1471622666-15197-2-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
This is an entirely new driver instead of yet another set of patches
to sb_edac.c because:
1) Mapping from PCI devices to socket/memory controller is significantly
different. Skylake scatters devices on a socket across a number of
PCI buses.
2) There is an extra level of interleaving via the "mcroute" register
that would be a little messy to squeeze into the old driver.
3) Validation is getting too expensive. Changes to sb_edac need to
be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and
Knights Landing.
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
According to the reference manual of MPC8572 and T4240, bit 31 of
PEX_ERR_CAP_STAT is W1C (write 1 to clear).
Add the corresponding write to PEX_ERR_CAP_STAT in order to fix the PCIe
error capture.
Tested on a T4240 processor.
Signed-off-by: Tillmann Heidsieck <theidsieck@leenox.de>
Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20160815190849.29327-1-theidsieck@leenox.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Replace the deprecated create_singlethread_workqueue() with
alloc_ordered_workqueue() with WQ_MEM_RECLAIM. This is the identity
conversion.
It's not recommended to stall it from memory pressure. Hence,
WQ_MEM_RECLAIM has been set to ensure forward progress under memory
pressure.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20160813164124.GA9077@Karyakshetra
Signed-off-by: Borislav Petkov <bp@suse.de>
Fix the following sparse warning:
drivers/edac/altera_edac.c:1649:23: warning:
symbol 'a10_eccmgr_ic_ops' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Reviewed-by: Thor Thayer <tthayer@opensource.altera.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lkml <linux-kernel@vger.kernel.org>
Link: http://lkml.kernel.org/r/1470836667-11822-1-git-send-email-weiyj.lk@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Fam15hMod60h systems are using the channel decode of Fam15hMod30h which
gives incorrect results. Fam15hMod60h systems should use the generic
channel decode method plus a couple more cases.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1470236355-30039-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
On Intel Xeon Phi Knights Landing processor family the channels of the
memory controller have untypical arrangement - MC0 is mapped to CH3,4,5
and MC1 is mapped to CH0,1,2. This causes the EDAC driver to report the
channel name incorrectly.
We missed this change earlier, so the code already contains similar
comment, but the translation function is incorrect.
Without this patch:
errors in DIMM_A and DIMM_D were reported in DIMM_D
errors in DIMM_B and DIMM_E were reported in DIMM_E
errors in DIMM_C and DIMM_F were reported in DIMM_F
Correct this.
Hubert Chrzaniuk:
- rebased to 4.8
- comments and code cleanup
Fixes: d0cdf90031 ("sb_edac: Add Knights Landing (Xeon Phi gen 2) support")
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Cc: lukasz.odzioba@intel.com
Cc: mchehab@kernel.org
Cc: <stable@vger.kernel.org> # v4.5..
Link: http://lkml.kernel.org/r/1469231089-22837-1-git-send-email-lukasz.odzioba@intel.com
Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
[ Boris: Simplify a bit by removing char mc. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
* Minor cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mdxx
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"This last cycle, Thor was busy adding Arria10 eth FIFO support to the
altera_edac driver along with other improvements. We have two
cleanups/fixes too.
Summary:
- Altera Arria10 ethernet FIFO buffer support (Thor Thayer)
- Minor cleanups"
* tag 'edac_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
ARM: dts: Add Arria10 Ethernet EDAC devicetree entry
EDAC, altera: Add Arria10 Ethernet EDAC support
EDAC, altera: Add Arria10 ECC memory init functions
Documentation: dt: socfpga: Add Arria10 Ethernet binding
EDAC, altera: Drop some ifdeffery
EDAC, altera: Add panic flag check to A10 IRQ
EDAC, altera: Check parent status for Arria10 EDAC block
EDAC, altera: Make all private data structures static
EDAC: Correct channel count limit
EDAC, amd64_edac: Init opstate at the proper time during init
EDAC, altera: Handle Arria10 SDRAM child node
EDAC, altera: Add ECC Manager IRQ controller support
Documentation: dt: socfpga: Add interrupt-controller to ecc-manager
In commit 2c1ea4c700 ("EDAC, sb_edac: Use cpu family/model in driver
detection") I broke Knights Landing because I failed to notice that it
called a wrapper macro "sbridge_get_all_devices_knl" instead of
"sbridge_get_all_devices" like all the other types.
Now that we include the processor type in the pci_id_table structure we
can skip the wrappers and just have the sbridge_get_all_devices() check
the type to decide whether to allow duplicate devices and controllers to
have registers spread across buses.
Fixes: 2c1ea4c700 ("EDAC, sb_edac: Use cpu family/model in driver detection")
Tested-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In preparation for additional memory module ECCs, the IRQ function will
check a panic flag before doing a kernel panic on double bit errors.
OCRAM uncorrectable errors cause a panic because sleep/resume functions
and FPGA contents during sleep are stored in OCRAM.
ECCs on peripheral FIFO buffers will not cause a kernel panic on DBERRs
because the packet can be retried and therefore recovered.
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1466603939-7526-3-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
c44696fff0 ("EDAC: Remove arbitrary limit on number of channels")
lifted the arbitrary limit on memory controller channels in EDAC.
However, the dynamic channel attributes dynamic_csrow_dimm_attr and
dynamic_csrow_ce_count_attr remained 6.
This wasn't a problem except channels 6 and 7 weren't visible in sysfs
on machines with more than 6 channels after the conversion to static
attr groups with
2c1946b6d6 ("EDAC: Use static attribute groups for managing sysfs entries")
[ without that, we're exploding in edac_create_sysfs_mci_device()
because we're dereferencing out of the bounds of the
dynamic_csrow_dimm_attr array. ]
Add attributes for channels 6 and 7 along with a guard for the
future, should more channels be required and/or to sanity check for
misconfigured machines.
We still need to check against the number of channels present on the MC
first, as Thor reported.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reported-by: Hironobu Ishii <ishii.hironobu@jp.fujitsu.com>
Tested-by: Thor Thayer <tthayer@opensource.altera.com>
Cc: <stable@vger.kernel.org> # 4.2
It is useless to do it if we're loaded on unsupported hardware so do
that only after we have detected at least 1 supported AMD northbridge.
Signed-off-by: Borislav Petkov <bp@suse.de>
Separate the device match arrays for each platform to prevent CycloneV
matches when calling of_platform_populate() on the Arria10 ECC manager
node.
If the SDRAM is a child node of ECC manager, call probe function via
of_platform_populate().
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1464193783-5071-4-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
In commit
2c1ea4c700 ("EDAC, sb_edac: Use cpu family/model in driver detection")
we switched from using PCI ids to determine which platform we are
running on to using CPU model instead.
I forgot that Broadwell-DE has its own distinct model number different
from Broadwell-EP or -EX.
Fixing this isn't just adding a line to the array of cpuids - the
exising code assumed a 1:1 mapping between entries in that array and the
"enum type" values. Added the type to pci_id_table structure to remove
this dependency and allows two Broadwell cpu models.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes: 2c1ea4c700 ("EDAC, sb_edac: Use cpu family/model in driver detection")
Link: http://lkml.kernel.org/r/b3cffe40dec6dfe0235a5d52a504f0ba86a07ce7.1464902605.git.tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Broadwell made a small change to the rank target register moving the
target rank ID field up from bits 16:19 to bits 20:23.
Also found that the offset field grew by one bit in the IVY_BRIDGE to
HASWELL transition, so fix the RIR_OFFSET() macro too.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org # v3.19+
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/2943fb819b1f7e396681165db9c12bb3df0e0b16.1464735623.git.tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
* Remove ad-hoc buffering of MCE records in sb_edac and i7core_edac. (Tony Luck)
* Do not register sb_edac with pci_register_driver(). (Tony Luck)
* Add support for Skylake to ie31200_edac. (Jason Baron)
* Do not register amd64_edac with pci_register_driver(). (Borislav Petkov)
+ the usual round of cleanups and fixes all over the place.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ud2P
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"It was pretty busy in EDAC land this time:
- Altera Arria10 L2 cache and On-Chip RAM ECC handling (Thor Thayer)
- Remove ad-hoc buffering of MCE records in sb_edac and i7core_edac
(Tony Luck)
- Do not register sb_edac with pci_register_driver() (Tony Luck)
- Add support for Skylake to ie31200_edac (Jason Baron)
- Do not register amd64_edac with pci_register_driver() (Borislav
Petkov)
... plus the usual round of cleanups and fixes all over the place"
* tag 'edac_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (25 commits)
EDAC, amd64_edac: Drop pci_register_driver() use
EDAC, ie31200_edac: Add Skylake support
EDAC, sb_edac: Use cpu family/model in driver detection
EDAC, i7core: Remove double buffering of error records
EDAC, amd64_edac: Issue driver banner only on success
ARM: socfpga: Initialize Arria10 OCRAM ECC on startup
EDAC: Increment correct counter in edac_inc_ue_error()
EDAC, sb_edac: Remove double buffering of error records
EDAC: Fix used after kfree() error in edac_unregister_sysfs()
EDAC, altera: Avoid unused function warnings
EDAC, altera: Remove useless casts
ARM: socfpga: Enable Arria10 OCRAM ECC on startup
EDAC, altera: Add Arria10 OCRAM ECC support
Documentation: dt: socfpga: Add Altera Arria10 OCRAM binding
EDAC, altera: Make OCRAM ECC dependency check generic
EDAC, altera: Add register offset for ECC Enable
EDAC, altera: Extract error inject operations to a struct fops
ARM: socfpga: Enable Arria10 L2 cache ECC on startup
EDAC, altera: Add Arria10 L2 Cache ECC handling
Documentation, dt, socfpga: Add Altera Arria10 L2 cache binding
...
Use X86_FEATURE_SMCA when detecting if SMCA is available instead of
directly using CPUID 0x80000007_EBX.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1462971509-3856-7-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
