We have added support for some AFBC only pixel formats like :-
DRM_FORMAT_YUV420_8BIT (single plane YUV 420 8 bit format)
DRM_FORMAT_VUY888 (single plane YUV 444 8 bit format)
DRM_FORMAT_VUY101010 (single plane YUV 444 10 bit format)
DRM_FORMAT_YUV420_10BIT (single plane YUV 420 10 bit format)
Generally, these formats are supported by our hardware using the same
hw-ids as the equivalent multi plane pixel formats.
Also we have added support for XYUV 444 8 and 10 bit formats
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291761/?series=57895&rev=1
Added the AFBC decoder registers for DP500 , DP550 and DP650.
These registers control the processing of AFBC buffers. It controls various
features like AFBC decoder enable, lossless transformation and block split
as well as setting of the left, right, top and bottom cropping of AFBC
buffers (in number of pixels).
All the layers (except DE_SMART) support framebuffers with AFBC modifiers.
One needs to set the pixel values of the top, left, bottom and right
cropping for the AFBC framebuffer.
Cropping an AFBC framebuffer is controlled by the AFBC crop registers.
In that case, the layer input size registers should be configured with
framebuffer's dimensions and not with drm_plane_state source width/height
values (which is used for non AFBC framebuffer to denote cropping).
Changes from v1:
- Removed the "if (fb->modifier)" check from malidp_de_plane_update()
and added it in malidp_de_set_plane_afbc(). This will consolidate all the
AFBC specific register configurations in a single function ie
malidp_de_set_plane_afbc().
Changes from v2:
- For AFBC framebuffer, layer input size register should be set to
framebuffer's width and height.
Changes from v3:
- Rebased on top of latest drm-misc-next
- Some cleanups/sanity changes based on Liviu's comments
Changes from v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
This new format is supported by DP550 and DP650
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291758/?series=57895&rev=1
As we look to enable AFBC using DRM format modifiers, we run into
problems which we've historically handled via vendor-private details
(i.e. gralloc, on Android).
AFBC (as an encoding) is fully flexible, and for example YUV data can
be encoded into 1, 2 or 3 encoded "planes", much like the linear
equivalents. Component order is also meaningful, as AFBC doesn't
necessarily care about what each "channel" of the data it encodes
contains. Therefore ABGR8888 and RGBA8888 can be encoded in AFBC with
different representations. Similarly, 'X' components may be encoded
into AFBC streams in cases where a decoder expects to decode a 4th
component.
In addition, AFBC is a licensable IP, meaning that to support the
ecosystem we need to ensure that _all_ AFBC users are able to describe
the encodings that they need. This is much better achieved by
preserving meaning in the fourcc codes when they are combined with an
AFBC modifier.
In essence, we want to use the modifier to describe the parameters of
the AFBC encode/decode, and use the fourcc code to describe the data
being encoded/decoded.
To do anything different would be to introduce redundancy - we would
need to duplicate in the modifier information which is _already_
conveyed clearly and non-ambigiously by a fourcc code.
I hope that for RGB this is non-controversial.
(BGRA8888 + MODIFIER_AFBC) is a different format from
(RGBA8888 + MODIFIER_AFBC).
Possibly more controversial is that (XBGR8888 + MODIFIER_AFBC)
is different from (BGR888 + MODIFIER_AFBC). I understand that in some
schemes it is not the case - but in AFBC it is so.
Where we run into problems is where there are not already fourcc codes
which represent the data which the AFBC encoder/decoder is processing.
To that end, we want to introduce new fourcc codes to describe the
data being encoded/decoded, in the places where none of the existing
fourcc codes are applicable.
Where we don't support an equivalent non-compressed layout, or where
no "obvious" linear layout exists, we are proposing adding fourcc
codes which have no associated linear layout - because any layout we
proposed would be completely arbitrary.
Some formats are following the naming conventions from [2].
The summary of the new formats is:
DRM_FORMAT_VUY888 - Packed 8-bit YUV 444. Y followed by U then V.
DRM_FORMAT_VUY101010 - Packed 10-bit YUV 444. Y followed by U then
V. No defined linear encoding.
DRM_FORMAT_Y210 - Packed 10-bit YUV 422. Y followed by U (then Y)
then V. 10-bit samples in 16-bit words.
DRM_FORMAT_Y410 - Packed 10-bit YUV 444, with 2-bit alpha.
DRM_FORMAT_P210 - Semi-planar 10-bit YUV 422. Y plane, followed by
interleaved U-then-V plane. 10-bit samples in
16-bit words.
DRM_FORMAT_YUV420_8BIT - Packed 8-bit YUV 420. Y followed by U then
V. No defined linear encoding
DRM_FORMAT_YUV420_10BIT - Packed 10-bit YUV 420. Y followed by U
then V. No defined linear encoding
Please also note that in the absence of AFBC, we would still need to
add Y410, Y210 and P210.
Full rationale follows:
YUV 444 8-bit, 1-plane
----------------------
The currently defined AYUV format encodes a 4th alpha component,
which makes it unsuitable for representing a 3-component YUV 444
AFBC stream.
The proposed[1] XYUV format which is supported by Mali-DP in linear
layout is also unsuitable, because the component order is the
opposite of the AFBC version, and it encodes a 4th 'X' component.
DRM_FORMAT_VUY888 is the "obvious" format for a 3-component, packed,
YUV 444 8-bit format, with the component order which our HW expects to
encode/decode. It conforms to the same naming convention as the
existing packed YUV 444 format.
The naming here is meant to be consistent with DRM_FORMAT_AYUV and
DRM_FORMAT_XYUV[1]
YUV 444 10-bit, 1-plane
-----------------------
There is no currently-defined YUV 444 10-bit format in
drm_fourcc.h, irrespective of number of planes.
The proposed[1] XVYU2101010 format which is supported by Mali-DP in
linear layout uses the wrong component order, and also encodes a 4th
'X' component, which doesn't match the AFBC version of YUV 444
10-bit which we support.
DRM_FORMAT_Y410 is the same layout as XVYU2101010, but with 2 bits of
alpha. This format is supported with linear layout by Mali GPUs. The
naming follows[2].
There is no "obvious" linear encoding for a 3-component 10:10:10
packed format, and so DRM_FORMAT_VUY101010 defines a component
order, but not a bit encoding. Again, the naming is meant to be
consistent with DRM_FORMAT_AYUV.
YUV 422 8-bit, 1-plane
----------------------
The existing DRM_FORMAT_YUYV (and the other component orders) are
single-planar YUV 422 8-bit formats. Following the convention of
the component orders of the RGB formats, YUYV has the correct
component order for our AFBC encoding (Y followed by U followed by
V). We can use YUYV for AFBC YUV 422 8-bit.
YUV 422 10-bit, 1-plane
-----------------------
There is no currently-defined YUV 422 10-bit format in drm_fourcc.h
DRM_FORMAT_Y210 is analogous to YUYV, but with 10-bits per sample
packed into the upper 10-bits of 16-bit samples. This format is
supported in both linear and AFBC by Mali GPUs.
YUV 422 10-bit, 2-plane
-----------------------
The recently defined DRM_FORMAT_P010 format is a 10-bit semi-planar
YUV 420 format, which has the correct component ordering for an AFBC
2-plane YUV 420 buffer. The linear layout contains meaningless padding
bits, which will not be encoded in an AFBC stream.
YUV 420 8-bit, 1-plane
----------------------
There is no currently defined single-planar YUV 420, 8-bit format
in drm_fourcc.h. There's differing opinions on whether using the
existing fourcc-implied n_planes where possible is a good idea or
not when using modifiers.
For me, it's much more "obvious" to use NV12 for 2-plane AFBC and
YUV420 for 3-plane AFBC. This keeps the aforementioned separation
between the AFBC codec settings (in the modifier) and the pixel data
format (in the fourcc). With different vendors using AFBC, this helps
to ensure that there is no confusion in interoperation. It also
ensures that the AFBC modifiers describe AFBC itself (which is a
licensable component), and not implementation details which are not
defined by AFBC.
The proposed[1] X0L0 format which Mali-DP supports with Linear layout
is unsuitable, as it contains a 4th 'X' component, and our AFBC
decoder expects only 3 components.
To that end, we propose a new YUV 420 8-bit format. There is no
"obvious" linear encoding for a 3-component 8:8:8, 420, packed format,
and so DRM_FORMAT_YUV420_8BIT defines a component order, but not a
bit encoding. I'm happy to hear different naming suggestions.
YUV 420 8-bit, 2-, 3-plane
--------------------------
These already exist, we can use NV12 and YUV420.
YUV 420 10-bit, 1-plane
-----------------------
As above, no current definition exists, and X0L2 encodes a 4th 'X'
channel.
Analogous to DRM_FORMAT_YUV420_8BIT, we define DRM_FORMAT_YUV420_10BIT.
[1] https://lists.freedesktop.org/archives/dri-devel/2018-July/184598.html
[2] https://docs.microsoft.com/en-us/windows/desktop/medfound/10-bit-and-16-bit-yuv-video-formats
Changes since RFC v1:
- Fix confusing subsampling vs bit-depth X:X:X notation in
descriptions (danvet)
- Rename DRM_FORMAT_AVYU1101010 to DRM_FORMAT_Y410 (Lisa Wu)
- Add drm_format_info structures for the new formats, using the
new 'bpp' field for those with non-integer bytes-per-pixel
- Rebase, including Juha-Pekka Heikkila's format definitions
Changes since RFC v2:
- Rebase on top of latest changes in drm-misc-next
- Change the description of DRM_FORMAT_P210 in __drm_format_info and
drm_fourcc.h so as to make it consistent with other DRM_FORMAT_PXXX
formats.
Changes since v3:
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291759/?series=57895&rev=1
The vboxvideo driver has been converted to the atomic modesetting API
and all FIXME and TODO items have been fixed, so it is time to move it out
of staging.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190304164724.10210-4-hdegoede@redhat.com
Refactor vbox_update_mode_hints to no longer use the obsolete
drm_modeset_lock_all() and switch it over to drm_connector_list_iter
instead of directly accessing the list using list_for_each_entry.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190304164724.10210-3-hdegoede@redhat.com
Drop the initial_mode_queried workaround for kms clients which do not
support hotplug, all kms clients should be able to deal with hotplug.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190304164724.10210-2-hdegoede@redhat.com
Found while grepping around.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221155951.19855-1-daniel.vetter@ffwll.ch
The DRM_STM driver can be built independently of the framebuffer
layer, but it causes a Kconfig warning:
WARNING: unmet direct dependencies detected for FB_PROVIDE_GET_FB_UNMAPPED_AREA
Depends on [n]: HAS_IOMEM [=y] && FB [=n]
Selected by [y]:
- DRM_STM [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARCH_STM32 [=n] || ARCH_MULTIPLATFORM [=y])
Selecting FB_PROVIDE_GET_FB_UNMAPPED_AREA actually has no effect
if CONFIG_FB is disabled, so we can make it a conditional 'select'
instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307155323.2949975-1-arnd@arndb.de
No compatible string for it yet, just the version-dependent changes.
They've now tied the hub and the core interrupt lines into a single
interrupt line coming out of the block. It also turns out I made a
mistake in modeling the V3D v3.3 and v4.1 bridge as a part of V3D
itself -- the bridge is going away in favor of an external reset
controller in a larger HW module.
v2: Use consistent checks for whether we're on 4.2, and fix a leak in
an error path.
v3: Use more general means of determining if the current 4.2 changes
are in place, as apparently other platforms may switch back (noted
by Dave). Update the binding doc.
v4: Improve error handling for IRQ init.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-2-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>
The old field is gone and the register now has a different field,
QRMAXCNT for how many TMU requests get serviced before thread switch.
We were accidentally reducing it from its default of 0x3 (4 requests)
to 0x0 (1).
v2: Skip setting the reg at all on 4.x, instead of trying to update
only the old field.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220233658.986-2-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAlyA6D8ACgkQ/lWMcqZw
E8MkeA/+KRMSXY2ljbi59SKRx0/pQ0HPoZv4sb7J7Rr0IHTEOfTfxJRNjIbJDHvu
DR9F6+dx43XExWNr4mbKQ3Fooc7zKUJ/Fn1MrwVwr647LIBHtsw2VQ3PAcIK50Ph
ml+rDahrEAoUF8FMAXAK8IjXh5BXG/HSOAu14JMxQvKGm4/CmAgKFnPYU16Eg1Oc
kEi394cJ/DKsalXqIQiFDmCViuAYKUbMRoYYkAa/gr451zuGVoIOwSbhHTNcvjc2
cnF8oMAgjVdhp0egtKOqCHGXqSd0l4LMxjy5zOyatpgmMELK7Ns1dyWMtyPFQWKp
pgD/QoGWn7aTMR1ihh6u0tNOfRIHQxrXVXAjHfA2uWVQC6Ms9cDilNkyizOXrcb6
r9tAOTeGQI6mhVhQhaVzi/NSYxrsXBt8Bo6Spj8QYupfNGU0tlOxwMqtcHXrJZ1N
06/+IPXwzYVkxzhtR3ORvwqFOkIT4ZvOc5zxT27TKSBR/HMDa4CFJFrcAAR+3eN+
Wn6wLDDxPW+ZA7Oitrq5iAJaXif8QEEtXETS/S3ZubDFw0qQYvFJbmpNOSMd9qk4
WfxUhzMiLm2DuD44b3x28fi0ekLehquWFuyBrIyAic5K+GDMJamqSBgKXXB5Oen6
hbL1mBq5ZdMZRfOR+ss2QwlbI47deHdhhEq36Rl7gi1Pub2qNuY=
=u0KV
-----END PGP SIGNATURE-----
Merge tag 'topic/hdr-formats-2019-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-misc-next
Add support for Y21x and Y41x to drm core and i915, and P01x support to i915.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f2485309-d645-bed4-95f4-e66ff312aa05@linux.intel.com
The current code, since commit bb43d40d7c ("drm/sun4i: rgb: Validate the
clock rate"), perform some validation on the pixel clock to filter out the
EDID modes provided by monitors (through bridges) that we wouldn't be able
to reach. For the usual modes, we're able to generate a perfect clock rate,
so a strict check was enough.
However, this had the side effect of preventing displays that would work
otherwise to operate properly, since we would pretty much never be able to
generate an exact rate for those displays, even though we would fall within
that panel tolerance.
This was also shown to happen for unusual modes exposed through EDIDs, for
example on eDP panels.
We can work around this by simplifying a bit the problem: no panels we've
encountered so far actually needed that check. All of them are tied to a
particular board when it is produced, and made to work with the Allwinner
BSP. That pretty much guarantees that we never have a pixel clock out of
reach.
On the other hand, the EDIDs modes that needed to be validated have always
been exposed through bridges.
Let's just use that metric to instead of validating all modes, only
validate modes when we have a bridge attached. It should be good enough for
now, while we still have room for improvements or refinements using the
display_timings structure for example for panels.
We also add a tolerance for EDID-based modes instead of doing a strict
check. This tolerance is of 0.5% which is the one advertised in the VESA
DVT and CVT specs. If that needed to be extended in the future, we can add
a custom module parameter to relax it a bit.
Fixes: bb43d40d7c ("drm/sun4i: rgb: Validate the clock rate")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> # tested on pinebook
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ec2dc2a7b3d4bd44f7a2a6e1c1813f92449a7310.1551191081.git-series.maxime.ripard@bootlin.com
Our clock rate variables are getting pretty close to the LONG_MAX / ULONG_MAX
limit, especially since we will start doing arithmetic on it. Move those
types to unsigned long long to be sure we don't overflow their type.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> # tested on pinebook
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/022c3b850413edd6afbca20062f100971de2f5af.1551191081.git-series.maxime.ripard@bootlin.com
The TCON driver used to need the panel pointer in order to configure the
tcon according to the various parameters of the panel. However, this has
evolved over time (especially to support bridges), and therefore the panel
pointer isn't needed anymore by the TCON driver.
Move that pointer to the LVDS and RGB encoders drivers.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> # tested on pinebook
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/13288b6b8f27b614a6c9aef348923c34b2803ad4.1551191081.git-series.maxime.ripard@bootlin.com
The preferred bpp for the fbdev emulation buffer has been 32 so far, which
means that by default we will allocate an 8MB buffer with a 1920x1080
resolution.
Worse this memory will be allocated from the CMA pool, and will never be
freed even if we don't use the fbdev emulation. Therefore, reducing it is a
big deal, and switching to 16bpp by default will gain us around 4MB at
1920x1080, while keeping decent color depth. And users still have the
option to switch to 32bpp using the kernel command line.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306140245.21973-1-maxime.ripard@bootlin.com
In order to test whether the load tracker is working as expected, we
need the ability to compare the commit result with the underrun
indication. With the load tracker always enabled, commits that are
expected to trigger an underrun are always rejected, so userspace
cannot get the actual underrun indication from the hardware.
Add a debugfs entry to disable/enable the load tracker, so that a DRM
commit expected to trigger an underrun can go through with the load
tracker disabled. The underrun indication is then available to
userspace and can be checked against the commit result with the load
tracker enabled.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220155124.25022-4-paul.kocialkowski@bootlin.com
The HVS block is supposed to fill the pixelvalve FIFOs fast enough to
meet the requested framerate. The problem is, the HVS and memory bus
bandwidths are limited, and if we don't take these limitations into
account we might end up with HVS underflow errors.
This patch is trying to model the per-plane HVS and memory bus bandwidth
consumption and take a decision at atomic_check() time whether the
estimated load will fit in the HVS and membus budget.
Note that we take an extra margin on the memory bus consumption to let
the system run smoothly when other blocks are doing heavy use of the
memory bus. Same goes for the HVS limit, except the margin is smaller in
this case, since the HVS is not used by external components.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220155124.25022-3-paul.kocialkowski@bootlin.com
Add a debugfs entry and helper for reporting HVS underrun errors as
well as helpers for masking and unmasking the underrun interrupts.
Add an IRQ handler and initial IRQ configuration.
Rework related register definitions to take the channel number.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220155124.25022-2-paul.kocialkowski@bootlin.com
The DP 1.4 spec defines the SDP header and SDP contents for
a Picture Parameter Set (PPS) that must be sent in advance
of DSC transmission to define the encoding characteristics.
This was done in one struct, drm_dsc_pps_infoframe, which
conatined the SDP header and PPS. Because the PPS is
a property of DSC over any connector, not just DP, and because
drm drivers may have their own SDP structs they wish to use,
make the functions that initialise SDP and PPS headers take
the components they operate on, not drm_dsc_pps_infoframe,
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-4-David.Francis@amd.com
Native 420 and 422 transfer modes are new in DSC1.2
In these modes, each two pixels of a slice are treated as one
pixel, so the slice width is half as large (round down) for
the purposes of calucating the groups per line and chunk size
in bytes
In native 422 mode, each pixel has four components, so the
mux component of a group is larger by one additional mux word
and one additional component
Now that there is native 422 support, the configuration option
previously called enable422 is renamed to simple_422 to avoid
confusion
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-3-David.Francis@amd.com
The function intel_compute_rc_parameters is part of the dsc spec
and is not driver-specific. Other drm drivers might like to use
it. The function is not changed; just moved and renamed.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-2-David.Francis@amd.com
The following pixel formats are packed format that follows 4:2:2
chroma sampling. For memory represenation each component is
allocated 16 bits each. Thus each pixel occupies 32bit.
Y210: For each component, valid data occupies MSB 10 bits.
LSB 6 bits are filled with zeroes.
Y212: For each component, valid data occupies MSB 12 bits.
LSB 4 bits are filled with zeroes.
Y216: For each component valid data occupies 16 bits,
doesn't require any padding bits.
First 16 bits stores the Y value and the next 16 bits stores one
of the chroma samples alternatively. The first luma sample will
be accompanied by first U sample and second luma sample is
accompanied by the first V sample.
The following pixel formats are packed format that follows 4:4:4
chroma sampling. Channels are arranged in the order UYVA in
increasing memory order.
Y410: Each color component occupies 10 bits and X component
takes 2 bits, thus each pixel occupies 32 bits.
Y412: Each color component is 16 bits where valid data
occupies MSB 12 bits. LSB 4 bits are filled with zeroes.
Thus, each pixel occupies 64 bits.
Y416: Each color component occupies 16 bits for valid data,
doesn't require any padding bits. Thus, each pixel
occupies 64 bits.
v3: fixed missing tab for XYUV8888 (JP)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1551700595-21481-5-git-send-email-swati2.sharma@intel.com
- Block fb changes for async atomic updates to prevent a use after free.
- Fix ID mismatch error on load in bochs.
- Fix memory leak when drm_setup fails.
- Fixes around handling of DRM_AUTH.
-
-----BEGIN PGP SIGNATURE-----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=Rf1K
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-02-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-fixes for v5.0:
- Block fb changes for async atomic updates to prevent a use after free.
- Fix ID mismatch error on load in bochs.
- Fix memory leak when drm_setup fails.
- Fixes around handling of DRM_AUTH.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/42113611-e2cd-6bdd-7de5-4f8ab5a0cbe6@linux.intel.com
In VRR mode, keep track of the vblank count of the last
completed pageflip in amdgpu_crtc->last_flip_vblank, as
recorded in the pageflip completion handler after each
completed flip.
Use that count to prevent mmio programming a new pageflip
within the same vblank in which the last pageflip completed,
iow. to throttle pageflips to at most one flip per video
frame, while at the same time allowing to request a flip
not only before start of vblank, but also anywhere within
vblank.
The old logic did the same, and made sense for regular fixed
refresh rate flipping, but in vrr mode it prevents requesting
a flip anywhere inside the possibly huge vblank, thereby
reducing framerate in vrr mode instead of improving it, by
delaying a slightly delayed flip requests up to a maximum
vblank duration + 1 scanout duration. This would limit VRR
usefulness to only help applications with a very high GPU
demand, which can submit the flip request before start of
vblank, but then have to wait long for fences to complete.
With this method a flip can be both requested and - after
fences have completed - executed, ie. it doesn't matter if
the request (amdgpu_dm_do_flip()) gets delayed until deep
into the extended vblank due to cpu execution delays. This
also allows clients which want to regulate framerate within
the vrr range a much more fine-grained control of flip timing,
a feature that might be useful for video playback, and is
very useful for neuroscience/vision research applications.
In regular non-VRR mode, retain the old flip submission
behavior. This to keep flip scheduling for fullscreen X11/GLX
OpenGL clients intact, if they use the GLX_OML_sync_control
extensions glXSwapBufferMscOML(, ..., target_msc,...) function
with a specific target_msc target vblank count.
glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will
not flip at the proper target_msc for a non-zero target_msc
if VRR mode is active with this patch. They'd often flip one
frame too early. However, this limitation should not matter
much in VRR mode, as scheduling based on vblank counts is
pretty futile/unusable under variable refresh duration
anyway, so no real extra harm is done.
According to some testing already done with this patch by
Nicholas on top of my tests, IGT tests didn't report any
problems. If fixes stuttering and flickering when flipping
at rates below the minimum vrr refresh rate.
Fixes: bb47de7366 ("drm/amdgpu: Set FreeSync state using drm VRR
properties")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Tested-by: Bruno Filipe <bmilreu@gmail.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This protects device resources from use after device removal.
There are 3 ways for driver-device unbinding to happen:
- The driver module is unloaded causing the driver to be unregistered.
This can't happen as long as there are open file handles because a
reference is taken on the module.
- The device is removed (Device Tree overlay unloading).
This can happen at any time.
- The driver sysfs unbind file can be used to unbind the driver from the
device. This can happen any time.
v2: Since drm_atomic_helper_shutdown() has to be called after
drm_dev_unplug() we don't want do block ->disable after unplug.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-8-noralf@tronnes.org
No more users left so it can go alongside its helpers.
Update the tinydrm docs description and remove todo entry.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-7-noralf@tronnes.org
This adds a resource managed (devres) version of drm_dev_init().
v2: Remove devm_drm_dev_register() since we can't touch hw in devm
release functions and drivers want to disable hw on driver module
unload (Daniel Vetter, Greg KH)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-3-noralf@tronnes.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlx8YYIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGs5MIAIiVVIH+C0St60vf
nzfGpVe+BETe199UveM4Ic2FWMk97ZhSk5Oj6HwYY9vnw4iwoRCZIO5B8Dna4nxY
8XjiwxpJRVLq+7Y1d61O6NHo6UjFHF0GMzyeJeNNUq+mCISxZdLsqzsszt9X09mA
GoJjZ0UMw2Tkz/s3Ie4MumKASc+y2CjJc0ZVEZlJsMaqMJLIfUn/CrTzHBivmuqJ
sV6ZkP4as6h87bI9mi79p8pzvVooCRJ10cg4A/DHG4t2bEAIlB4t5dfZRFzVMhVo
cCPRk9tiA9y4I3zBjcuAZMODcBpfdWoQK8TqYw2cDS3LEDMgnEdIH6snMYHr69z0
kZJjA2A=
=Qs0l
-----END PGP SIGNATURE-----
Merge v5.0 into drm-next
There is a really hairy resolution involving amdgpu fixes, that I'd rather confirm here.
Also some misc fixes are landed by me, but the pr has them as well.
Signed-off-by: Dave Airlie <airlied@redhat.com>
One more set of simple ARM platform fixes:
- A boot regression on qualcomm msm8998
- Gemini display controllers got turned off by accident
- incorrect reference counting in optee
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=doMO
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"One more set of simple ARM platform fixes:
- A boot regression on qualcomm msm8998
- Gemini display controllers got turned off by accident
- incorrect reference counting in optee"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
tee: optee: add missing of_node_put after of_device_is_available
arm64: dts: qcom: msm8998: Extend TZ reserved memory area
ARM: dts: gemini: Re-enable display controller
Pull x86 fixes from Thomas Gleixner:
"Two last minute fixes:
- Prevent value evaluation via functions happening in the user access
enabled region of __put_user() (put another way: make sure to
evaluate the value to be stored in user space _before_ enabling
user space accesses)
- Correct the definition of a Hyper-V hypercall constant"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyper-v: Fix definition of HV_MAX_FLUSH_REP_COUNT
x86/uaccess: Don't leak the AC flag into __put_user() value evaluation
Nine small fixes. The resume fix is a cosmetic removal of a warning
with an incorrect condition causing it to alarm people wrongly. The
other eight patches correct a thinko in Christoph Hellwig's DMA
conversion series. Without it all these drivers end up with 32 bit
DMA masks meaning they bounce any page over 4GB before sending it to
the controller. Nowadays, even laptops mostly have memory above 4GB,
so this can lead to significant performance degradation with all the
bouncing.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXHql8CYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQmvAQCSVQRf
kx3ABDGnaj4Km4/Jzibj44aCYwh+ewwtLCWwFQD9GWaEaDxBkbxQDf/YndQKRhYg
VJQjjj6a9VlNSmWoW28=
=L9Fe
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Nine small fixes.
The resume fix is a cosmetic removal of a warning with an incorrect
condition causing it to alarm people wrongly.
The other eight patches correct a thinko in Christoph Hellwig's DMA
conversion series. Without it all these drivers end up with 32 bit DMA
masks meaning they bounce any page over 4GB before sending it to the
controller.
Nowadays, even laptops mostly have memory above 4GB, so this can lead
to significant performance degradation with all the bouncing"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Avoid that system resume triggers a kernel warning
scsi: hptiop: fix calls to dma_set_mask()
scsi: hisi_sas: fix calls to dma_set_mask_and_coherent()
scsi: csiostor: fix calls to dma_set_mask_and_coherent()
scsi: bfa: fix calls to dma_set_mask_and_coherent()
scsi: aic94xx: fix calls to dma_set_mask_and_coherent()
scsi: 3w-sas: fix calls to dma_set_mask_and_coherent()
scsi: 3w-9xxx: fix calls to dma_set_mask_and_coherent()
scsi: lpfc: fix calls to dma_set_mask_and_coherent()
Pull networking fixes from David Miller:
1) Fix refcount leak in act_ipt during replace, from Davide Caratti.
2) Set task state properly in tun during blocking reads, from Timur
Celik.
3) Leaked reference in DSA, from Wen Yang.
4) NULL deref in act_tunnel_key, from Vlad Buslov.
5) cipso_v4_erro can reference the skb IPCB in inappropriate contexts
thus referencing garbage, from Nazarov Sergey.
6) Don't accept RTA_VIA and RTA_GATEWAY in contexts where those
attributes make no sense.
7) Fix hung sendto in tipc, from Tung Nguyen.
8) Out-of-bounds access in netlabel, from Paul Moore.
9) Grant reference leak in xen-netback, from Igor Druzhinin.
10) Fix tx stalls with lan743x, from Bryan Whitehead.
11) Fix interrupt storm with mv88e6xxx, from Hein Kallweit.
12) Memory leak in sit on device registry failure, from Mao Wenan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
net: sit: fix memory leak in sit_init_net()
net: dsa: mv88e6xxx: Fix statistics on mv88e6161
geneve: correctly handle ipv6.disable module parameter
net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode
bpf: fix sanitation rewrite in case of non-pointers
ipv4: Add ICMPv6 support when parse route ipproto
MIPS: eBPF: Fix icache flush end address
lan743x: Fix TX Stall Issue
net: phy: phylink: fix uninitialized variable in phylink_get_mac_state
net: aquantia: regression on cpus with high cores: set mode with 8 queues
selftests: fixes for UDP GRO
bpf: drop refcount if bpf_map_new_fd() fails in map_create()
net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X
net: dsa: mv88e6xxx: Fix u64 statistics
xen-netback: don't populate the hash cache on XenBus disconnect
xen-netback: fix occasional leak of grant ref mappings under memory pressure
sctp: chunk.c: correct format string for size_t in printk
net: netem: fix skb length BUG_ON in __skb_to_sgvec
netlabel: fix out-of-bounds memory accesses
ipv4: Pass original device to ip_rcv_finish_core
...
