* Switch to use dwc3-qcom glue driver on MSM8996
* Fix issue with xo clk name on MSM8998
* Add cooling maps on MSM8916
* Add UART nodes on SDM845
* Add camera subsystem support on MSM8996 and MSM8916
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=EMri
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.21 Part 2
* Switch to use dwc3-qcom glue driver on MSM8996
* Fix issue with xo clk name on MSM8998
* Add cooling maps on MSM8916
* Add UART nodes on SDM845
* Add camera subsystem support on MSM8996 and MSM8916
* tag 'qcom-arm64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
arm64: dts: qcom: msm8998: Fixup clock to use xo_board
arm64: dts: qcom: sdm845: Add UART nodes
arm64: dts: qcom: msm8996: Add CAMSS support
arm64: dts: qcom: msm8996: Add VFE SMMU node
arm64: dts: qcom: Add pinctrls for camera sensors
arm64: dts: qcom: Add Camera Control Interface pinctrls
arm64: dts: qcom: msm8916: Add CAMSS support
arm64: dts: qcom: msm8916: Add IOMMU sub-node for VFE context bank
arm64: dts: msm8916: Add all CPUs in cooling maps
Signed-off-by: Olof Johansson <olof@lixom.net>
Our usual set of arm64 DT changes, with the biggest additions being:
- Support for the video decoding engine in the A64
- Support for the audio codec in the A64
- USB Support in the H6
- HDMI Support in the H6
- EMAC Support in the H6
- New board: Orange Pi Lite2
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqGvQAKCRDj7w1vZxhR
xeObAQDZGMVjFjiWlC0jYjBQoCHMf1dlu6iPd4qe8h3GS1XUVQD/c8SJaMj5oLX1
HKjtqQD+sJRUQdcWlwAsqEEKyKUhfQs=
=aAr3
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner arm64 DT changes for 4.21
Our usual set of arm64 DT changes, with the biggest additions being:
- Support for the video decoding engine in the A64
- Support for the audio codec in the A64
- USB Support in the H6
- HDMI Support in the H6
- EMAC Support in the H6
- New board: Orange Pi Lite2
* tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits)
arm64: dts: allwinner: a64: Fix up RTC device node and clock references
arm64: dts: allwinner: a64: Add Video Engine node
arm64: dts: allwinner: a64: Add support for the SRAM C1 section
arm64: dts: allwinner: a64: pinebook: enable power supplies
arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies
arm64: dts: allwinner: axp803: add AC and battery power supplies
arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec
arm64: dts: allwinner: a64: enable sound on Pinebook
arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine
arm64: dts: allwinner: a64: add nodes necessary for analog sound support
arm64: dts: allwinner: h6: orangepi: Add device nodes for LEDs
arm64: dts: allwinner: h6: orangepi: Enable USB 2.0 host and OTG ports
arm64: dts: allwinner: h6: orangepi: Add board-wide 5V regulator
arm64: dts: allwinner: h6: fix EMAC compatible string sequence
arm64: dts: allwinner: a64: Add device node for Mali-400 GPU
dt-bindings: gpu: mali-utgard: Add compatible for A64 Mali
arm64: dts: allwinner: h6: enable USB2 on Pine H64
arm64: dts: allwinner: h6: add USB Vbus regulator for Pine H64
arm64: dts: allwinner: h6: add USB2-related device nodes
arm64: dts: allwinner: h6: Enable HDMI output on Pine H64 board
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This is a quite big pull request this time, with a huge number of changes
(and patches) due to us fixing the vast majority of the DTC warnings our DT
had.
We also have a bunch of other good, more meaningful, changes:
- Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5)
SoCs
- AXP803 PMIC AC Power supply support
- Rework of the oscillators tree
- Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano
Plus a few enhancements here and there.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqFhwAKCRDj7w1vZxhR
xcQzAQDJu0dPrs3SQlWdDhOa0iFVp/7gmN4iRMxMScIIjrRUgAEAzmhUjQNNTNLc
OPF9XzMdT12rs2SAbk2XXtWH1hN8KQA=
=vSCG
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.21
This is a quite big pull request this time, with a huge number of changes
(and patches) due to us fixing the vast majority of the DTC warnings our DT
had.
We also have a bunch of other good, more meaningful, changes:
- Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5)
SoCs
- AXP803 PMIC AC Power supply support
- Rework of the oscillators tree
- Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano
Plus a few enhancements here and there.
* tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (84 commits)
ARM: dts: sunxi: Fix PMU compatible strings
ARM: dts: sun8i: r40: Add RTC device node
ARM: dts: sunxi: h3/h5: Fix up RTC device node and clock references
ARM: dts: sun8i: a23/a33: Fix up RTC device node
ARM: dts: sun8i: r40: Add clock accuracy for external oscillators
ARM: dts: sunxi: h3/h5: Add clock accuracy for external oscillators
ARM: dts: sun8i: a33: Drop audio codec oversampling rate to 128 fs
ARM: dts: sun8i: h3: Remove unnecessary reserved memory node
ARM: dts: sun8i: a33: Remove unnecessary reserved memory node
ARM: dts: suniv: Add device tree for Lichee Pi Nano
ARM: dts: suniv: add initial DTSI file for F1C100s
ARM: dts: axp81x: add AC power supply subnode
ARM: dts: sun8i: v3s: Remove skeleton and memory to avoid warnings
ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers
ARM: dts: sun8i: v3s: Change pinctrl nodes to avoid warning
ARM: dts: sun8i: v3s: Change LRADC node names to avoid warnings
ARM: dts: sun8i: h3: Remove leading zeros from unit-addresses
ARM: dts: sun8i: BPI-M2M: Remove i2c nodes
ARM: dts: sun8i: a23/a33: Provide default muxing for relevant controllers
ARM: dts: sunxi: reference: Move the muxing back to the common DTSI
...
Signed-off-by: Olof Johansson <olof@lixom.net>
These changes add a bunch of features for Tegra194 and Tegra186, such as
wake events, on-die RTC, temperature sensors, HDA for audio over HDMI
and fan support on Jetson Xavier to allow cooling of the device.
-----BEGIN PGP SIGNATURE-----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=CDXO
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
arm64: tegra: Device tree change for v4.21-rc1
These changes add a bunch of features for Tegra194 and Tegra186, such as
wake events, on-die RTC, temperature sensors, HDA for audio over HDMI
and fan support on Jetson Xavier to allow cooling of the device.
* tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (29 commits)
arm64: tegra: Set reg property for display-hub on Tegra194
arm64: tegra: Set reg property for display-hub on Tegra186
arm64: dts: tegra186: Enable IOMMU for SDHCI
arm64: tegra: Enable HDA controller on Jetson TX1
arm64: tegra: Add CEC controller on Tegra194
arm64: tegra: Enable HDA on Jetson Xavier
arm64: tegra: Add HDA controller on Tegra194
arm64: tegra: Add CEC controller on Tegra186
arm64: tegra: Enable HDA on Jetson TX2
arm64: tegra: Add HDA controller on Tegra186
arm64: tegra: Add temperature sensor on P2888
arm64: tegra: Add gpio-keys on Jetson Xavier
arm64: tegra: Add AON GPIO controller on Tegra194
arm64: tegra: p2888: Enable on-die RTC
arm64: tegra: Add RTC support on Tegra194
arm64: tegra: Enable PMC wake events on Tegra194
arm64: tegra: p3310: Enable on-die RTC
arm64: tegra: Add RTC support on Tegra186
arm64: tegra: Enable PMC wake events on Tegra186
arm64: tegra: Fix power key interrupt type on Jetson TX2
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Move from dwc3-of-simple to dwc3-qcom glue driver to
support peripheral mode which requires qscratch wrapper
programming on VBUS event.
Fixes: a4333c3a6b ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch sets the msm8998 xo clock name back to xo_board. Recent
clock tree changes fixed the clock tree and the change to the xo name
is causing issues where msm8998 boards do not boot properly. Let's
change it back and leave the xo label on it.
Fixes: 634da3307b (arm64: dts: qcom: msm8998: correct xo clock name)
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Technically the display-hub driver could access registers via the
specified region, though it practice it will do so via the display
controllers' register regions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Technically the display-hub driver could access registers via the
specified region, though it practice it will do so via the display
controllers' register regions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The RTC module on the A64 was claimed to be the same as on the A31, when
in fact it is not. It is actually compatible to the H3's RTC. The A64's
RTC has some extra crypto-related registers which the H3's does not, but
the exact function of these is not clear.
This patch fixes the compatible string and clock properties to conform
to the updated bindings. The device node for the internal oscillator is
removed, as it is internalized into the RTC device. Clock references to
the IOSC and LOSC are also fixed.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The RTC module on the H3 was claimed to be the same as on the A31, when
in fact it is not. The A31 does not have an RTC external clock output,
and its internal RC oscillator's average clock rate is not in the same
range. The H5's RTC has some extra crypto-related registers compared to
the H3. Their exact functions are not clear. Also the RTC-VIO regulator
has different settings.
This patch fixes the compatible string and clock properties to conform
to the updated bindings. The device node for the internal oscillator is
removed, as it is internalized into the RTC device. Clock references to
the IOSC and LOSC are also fixed.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The CEC controller found on Tegra194 can be used to control consumer
devices using the HDMI CEC pin.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The HDA controller found on Tegra194 can be used for audio playback over
HDMI.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The CEC controller found on Tegra186 can be used to control consumer
devices using the HDMI CEC pin.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the backlight device for the LVDS1 output, in preparation for panel
support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This adds nodes for all possible UARTs to sdm845.dtsi. By default
only configure the RX/TX lines with pinctrl. Boards that use UARTs
with flow control can overwrite the configuration in the
<board>.dtsi.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This adds the Video Engine node for the A64. Since it can map the whole
DRAM range, there is no particular need for a reserved memory node
(unlike platforms preceding the A33).
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Add the description for the SRAM C1 section to the A64 device-tree.
Since there is no entry for this section in the A64 manual, the base
address and size were only verified to be consistent empirically.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Add a node for the Camera Subsystem present on the Qualcomm
MSM8996 SoC.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add pinctrls required for camera sensors:
- power down signal;
- reset signal;
- camera external clock.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add pinctrls required for Camera Control Interface.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add a node for the Camera Subsystem present on the Qualcomm
MSM8916 SoC.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.
Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.
Update cooling maps to include all devices affected by individual trip
points.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The P2888 processor module contains a TI TMP451 temperature sensor with
two channels. These are used to measure the temperatures at different
locations on the module.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The power and force recovery buttons found on Jetson Xavier are hooked
up to two Tegra GPIOs. The power button can also function as a wake-up
source.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The AON GPIO controller is in an always-on power partition and typically
provides pins for functions that need to always work, such as the power
key for example.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The on-die RTC isn't hooked up to a backup battery, so it isn't useful
to track time across reboots, but as long as power remains enabled, it
keeps track of time accurately and can be used to wake the system from
sleep, for example.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The RTC on Tegra194 is very similar to the RTC on earlier generations.
One notable exception is that the source clock is now the 32 kHz clock
instead of a dedicated RTC clock and the RTC alarm is a wake event and
can be used to wake the system from sleep.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Wake events are a feature that allows the interrupt and GPIO controllers
to be powered off as part of system sleep. The PMC which is always on is
monitoring these wake events and can power up subsequent controllers as
necessary to process them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The on-die RTC isn't hooked up to a backup battery, so it isn't useful
to track time across reboots, but as long as power remains enabled, it
keeps track of time accurately and can be used to wake the system from
sleep, for example.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The RTC on Tegra186 is very similar to the RTC on earlier generations.
One notable exception is that the source clock is now the 32 kHz clock
instead of a dedicated RTC clock and the RTC alarm is a wake event and
can be used to wake the system from sleep.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Wake events are a feature that allows the interrupt and GPIO controllers
to be powered off as part of system sleep. The PMC which is always on is
monitoring these wake events and can power up subsequent controllers as
necessary to process them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
In order for the correct interrupt type to be configured, the event
action for the power key needs to be "asserted".
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable these thermal zones to be able to monitor their temperatures and
control the fan to cool down the system if necessary.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the 5V HDMI regulator and hook up the VDD_1V0 and VDD_1V8HS supplies
from the PMIC to the display block. Also enable the display hub which is
responsible for instantiating the display controllers. Finally, enable
the third SOR that drives the TMDS signals to the HDMI connector.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra194 has a version of VIC that is very similar to that on Tegra186.
Add the device tree node for it that is enabled by default.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra194 contains a display architecture very similar to that found on
the Tegra186. One notable exception is that DSI is no longer a supported
output. Instead there are four display controllers and four SORs (with a
DPAUX associated to each of them) that can drive HDMI or DP.
Signed-off-by: Thierry Reding <treding@nvidia.com>
* Hi3660 SoC and related boards:
- Standardize LED labels and triggers for the hikey960 board
- Add the missing cooling-cells property for the cpu nodes
- Add all cpus into the cooling maps
* Hi3670 SoC and related boards:
- Add clock nodes and update the uart clock
- Add Pinctrl, GPIO and uart nodes
- Enable uart and add GPIO line names for the hikey970 board
* Hi3798 SoC and related boards:
- Standardize LED labels and triggers for the poplar board
* Hi6220 SoC and related boards:
- Standardize LED labels and triggers for the hikey board
- Add all cpus into the cooling maps
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hzY6
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi into next/dt
ARM64: DT: Hisilicon SoCs DT updates for 4.21
* Hi3660 SoC and related boards:
- Standardize LED labels and triggers for the hikey960 board
- Add the missing cooling-cells property for the cpu nodes
- Add all cpus into the cooling maps
* Hi3670 SoC and related boards:
- Add clock nodes and update the uart clock
- Add Pinctrl, GPIO and uart nodes
- Enable uart and add GPIO line names for the hikey970 board
* Hi3798 SoC and related boards:
- Standardize LED labels and triggers for the poplar board
* Hi6220 SoC and related boards:
- Standardize LED labels and triggers for the hikey board
- Add all cpus into the cooling maps
* tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi:
ARM64: dts: hisilicon: Add all CPUs in cooling maps
arm64: dts: hi3660: Add missing cooling device properties for CPUs
arm64: dts: hisilicon: poplar: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey960: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey970: Add GPIO line names
arm64: dts: hisilicon: hikey970: Enable on-board UARTs
arm64: dts: hisilicon: hi3670: Add UART nodes
arm64: dts: hisilicon: hi3670: Add GPIO controller support
arm64: dts: hisilicon: Add Pinctrl support for HiKey970 board
arm64: dts: hisilicon: Source SoC clock for UART6
arm64: dts: hisilicon: Add clock nodes for Hi3670 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
This updates the Versatile Express family DTS files to
contain the correct and detailed information required
for the PL11x DRM driver to work properly.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJb/5ZcAAoJEEEQszewGV1zXo0QAMzrWDyBqNxgPR5XwNJBzgu1
x68wAA9N3jLXvHm0KG+J5OP9830m3uCLefhH4/dZN5XV4EjMME9n1Uv+uz6/8/Uu
fGBMFR1AwIH1qbN1bhG6wcC495vsUp+k8Q8zkpTZ4iT18pv0FMLgTugpOUIIbhxP
1oUP4xi/c97190QRy1OS7MDTyXElhrxoVtrjmggE9kWgkHPP76FX9ZAQE5EMTDtU
+O6JrpWuNjpusgOaTYwgNeKzOloAcFbNcaQOGLjHQmGoFRgRuK1jP+ZpULyFaJKo
5U4D6haYKJqcVhzlMclZa2rh3gkH8M8YUGhDNDABKiTdy1R+gkn44GWKBT9+uKpl
ve0Jd6ca3DhBe/XQlCADUYGmGy6PUJY9DpWCNxCZn/BBsSOLMiom51jndsnk8Y5b
gszQnkDPIv6tKxuUIxLS7Q89Jf3TIlVwiDbVHlzvYjiAqJQ9fsRa/BrGM5FknMl6
YAg8UPAqveUt26RL2t4VEpVY9FSJtCFsmvD202dbmbkJYHpihIN5Nse+msxAn5Ln
GbCZsA5SFSUapXYDSPQmpLiu2fGS8ojVUzadAKvoG1ktIo1h1SMbvBpHjeERIKaM
Zw1ErQ5IMyAhtXq64dqIEIgesb7zYiZ+TC89huJr96CRkShfu2bLy0oaqa09GUvk
JXPF+OrQmUqmq/5P385H
=4oHX
-----END PGP SIGNATURE-----
Merge tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt
Versatile Express DTS update for DRM:
This updates the Versatile Express family DTS files to
contain the correct and detailed information required
for the PL11x DRM driver to work properly.
* tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: Modernize the Vexpress PL111 integration
Signed-off-by: Olof Johansson <olof@lixom.net>
- Use SPDX license identifier for all SoCFPGA DTS files.
- Remove dma-mask property as it has been deprecated.
- Use tabs in DTS files.
- Use the specific "altr,stratix10-rst-mgr" property for the Stratix10
reset manager.
-----BEGIN PGP SIGNATURE-----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=IDQS
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt
SoCFPGA DTS updates for v5.0
- Use SPDX license identifier for all SoCFPGA DTS files.
- Remove dma-mask property as it has been deprecated.
- Use tabs in DTS files.
- Use the specific "altr,stratix10-rst-mgr" property for the Stratix10
reset manager.
* tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10: use "altr,stratix10-rst-mgr" binding
ARM: dts: socfpga: use tabs for indentation
arm: dts: socfpga: remove dma-mask property
arm: dts: socfpga*.dts*: use SPDX-License-Identifier
Signed-off-by: Olof Johansson <olof@lixom.net>
