On strict kernel memory permission, we couldn't patch code without
writable permission. Preserve two holes in fixmap area, so we can map
the kernel code temporarily to fixmap area, then patch the instructions.
We need two pages here because we support the compressed instruction, so
the instruction might be align to 2 bytes. When patching the 32-bit
length instruction which is 2 bytes alignment, it will across two pages.
Introduce two interfaces to patch kernel code:
riscv_patch_text_nosync:
- patch code without synchronization, it's caller's responsibility to
synchronize all CPUs if needed.
riscv_patch_text:
- patch code and always synchronize with stop_machine()
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Extract the calculation of instruction length for common use.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The commit contains that make text section as non-writable, rodata
section as read-only, and data section as non-executable.
The init section should be changed to non-executable.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The kernel mapping will tried to optimize its mapping by using bigger
size. In rv64, it tries to use PMD_SIZE, and tryies to use PGDIR_SIZE in
rv32. To ensure that the start address of these sections could fit the
mapping entry size, make them align to the biggest alignment.
Define a macro SECTION_ALIGN because the HPAGE_SIZE or PMD_SIZE, etc.,
are invisible in linker script.
This patch is prepared for STRICT_KERNEL_RWX support.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Move EXCEPTION_TABLE immediately after RO_DATA. Make it easy to set the
attribution of the sections which should be read-only at a time.
Add _data to specify the start of data section with write permission.
This patch is prepared for STRICT_KERNEL_RWX support.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
ARCH_SUPPORTS_DEBUG_PAGEALLOC provides a hook to map and unmap
pages for debugging purposes. Implement the __kernel_map_pages
functions to fill the poison pattern.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add set_direct_map_*() functions for setting the direct map alias for
the page to its default permissions and to an invalid state that cannot
be cached in a TLB. (See d253ca0c ("x86/mm/cpa: Add set_direct_map_*()
functions")) Add a similar implementation for RISC-V.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add set_memory_ro/rw/x/nx architecture hooks to change the page
attribution.
Use own set_memory.h rather than generic set_memory.h
(i.e. include/asm-generic/set_memory.h), because we want to add other
function prototypes here.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch fixes the IPI(inner processor interrupt) missing issue. It
failed because it used hartid_mask to iterate for_each_cpu(), however the
cpu_mask and hartid_mask may not be always the same. It will never send the
IPI to hartid 4 because it will be skipped in for_each_cpu loop in my case.
We can reproduce this case in Qemu sifive_u machine by this command.
qemu-system-riscv64 -nographic -smp 5 -m 1G -M sifive_u -kernel \
arch/riscv/boot/loader
It will hang in csd_lock_wait(csd) because the csd_unlock(csd) is not
called. It is not called because hartid 4 doesn't receive the IPI to
release this lock. The caller hart doesn't send the IPI to hartid 4 is
because of hartid 4 is skipped in for_each_cpu(). It will be skipped is
because "(cpu) < nr_cpu_ids" is not true. The hartid is 4 and nr_cpu_ids
is 4. Therefore it should use cpumask in for_each_cpu() instead of
hartid_mask.
/* Send a message to all CPUs in the map */
arch_send_call_function_ipi_mask(cfd->cpumask_ipi);
if (wait) {
for_each_cpu(cpu, cfd->cpumask) {
call_single_data_t *csd;
csd = per_cpu_ptr(cfd->csd, cpu);
csd_lock_wait(csd);
}
}
for ((cpu) = -1; \
(cpu) = cpumask_next((cpu), (mask)), \
(cpu) < nr_cpu_ids;)
It could boot to login console after this patch applied.
Fixes: b2d36b5668f6 ("riscv: provide native clint access for M-mode")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, PLIC threshold is only initialized once in the beginning.
However, threshold can be set to disabled if a CPU is marked offline with
CPU hotplug feature. This will not allow to change the irq affinity to a
CPU that just came online.
Add PLIC specific CPU hotplug callbacks and enable the threshold when a CPU
comes online. Take this opportunity to move the external interrupt enable
code from trap init to PLIC driver as well. On cpu offline path, the driver
performs the exact opposite operations i.e. disable the interrupt and
the threshold.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20200302231146.15530-2-atish.patra@wdc.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-03-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 86 non-merge commits during the last 12 day(s) which contain
a total of 107 files changed, 5771 insertions(+), 1700 deletions(-).
The main changes are:
1) Add modify_return attach type which allows to attach to a function via
BPF trampoline and is run after the fentry and before the fexit programs
and can pass a return code to the original caller, from KP Singh.
2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher
objects to be visible in /proc/kallsyms so they can be annotated in
stack traces, from Jiri Olsa.
3) Extend BPF sockmap to allow for UDP next to existing TCP support in order
in order to enable this for BPF based socket dispatch, from Lorenz Bauer.
4) Introduce a new bpftool 'prog profile' command which attaches to existing
BPF programs via fentry and fexit hooks and reads out hardware counters
during that period, from Song Liu. Example usage:
bpftool prog profile id 337 duration 3 cycles instructions llc_misses
4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)
5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition
of a new bpf_link abstraction to keep in particular BPF tracing programs
attached even when the applicaion owning them exits, from Andrii Nakryiko.
6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering
and which returns the PID as seen by the init namespace, from Carlos Neira.
7) Refactor of RISC-V JIT code to move out common pieces and addition of a
new RV32G BPF JIT compiler, from Luke Nelson.
8) Add gso_size context member to __sk_buff in order to be able to know whether
a given skb is GSO or not, from Willem de Bruijn.
9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output
implementation but can be called from tracepoint programs, from Eelco Chaudron.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If both CONFIG_KASAN and CONFIG_SPARSEMEM_VMEMMAP are set, we get the
following compilation error.
---------------------------------------------------------------
./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’:
./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared
(first use in this function); did you mean ‘mem_map’?
#define __pfn_to_page(pfn) (vmemmap + (pfn))
^~~~~~~
./include/asm-generic/memory_model.h:82:21: note: in expansion of
macro ‘__pfn_to_page’
#define pfn_to_page __pfn_to_page
^~~~~~~~~~~~~
./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro
‘pfn_to_page’
return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
---------------------------------------------------------------
Fix the compliation errors by moving all the address space definition
macros before including pgtable-64.h.
Fixes: 8ad8b72721 (riscv: Add KASAN support)
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
If secure_computing() rejected a system call, we were previously setting
the system call number to -1, to indicate to later code that the syscall
failed. However, if something (e.g. a user notification) was sleeping, and
received a signal, we may set a0 to -ERESTARTSYS and re-try the system call
again.
In this case, seccomp "denies" the syscall (because of the signal), and we
would set a7 to -1, thus losing the value of the system call we want to
restart.
Instead, let's return -1 from do_syscall_trace_enter() to indicate that the
syscall was rejected, so we don't clobber the value in case of -ERESTARTSYS
or whatever.
This commit fixes the user_notification_signal seccomp selftest on riscv to
no longer hang. That test expects the system call to be re-issued after the
signal, and it wasn't due to the above bug. Now that it is, everything
works normally.
Note that in the ptrace (tracer) case, the tracer can set the register
values to whatever they want, so we still need to keep the code that
handles out-of-bounds syscalls. However, we can drop the comment.
We can also drop syscall_set_nr(), since it is no longer used anywhere, and
the code that re-loads the value in a7 because of it.
Reported in: https://lore.kernel.org/bpf/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/
Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The newly introduced p*d_leaf macros allow to check if an entry of the
page table map to a physical page instead of the next level. To avoid
duplication of code, use those macros to determine if a page table entry
points to a hugepage.
Suggested-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add the ability to reboot the HiFive Unleashed board via GPIO.
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The SYSCON Reboot and Poweroff drivers can be used on QEMU virt machine
to reboot or poweroff the system hence we select these drivers using
QEMU virt machine kconfig option.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We have kconfig option for QEMU virt machine so let's enable it
in RV32 and RV64 defconfigs. Also, we remove various VIRTIO configs
from RV32 and RV64 defconfigs because these are now selected by
QEMU virt machine kconfig option.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This is an eBPF JIT for RV32G, adapted from the JIT for RV64G and
the 32-bit ARM JIT.
There are two main changes required for this to work compared to
the RV64 JIT.
First, eBPF registers are 64-bit, while RV32G registers are 32-bit.
BPF registers either map directly to 2 RISC-V registers, or reside
in stack scratch space and are saved and restored when used.
Second, many 64-bit ALU operations do not trivially map to 32-bit
operations. Operations that move bits between high and low words,
such as ADD, LSH, MUL, and others must emulate the 64-bit behavior
in terms of 32-bit instructions.
This patch also makes related changes to bpf_jit.h, such
as adding RISC-V instructions required by the RV32 JIT.
Supported features:
The RV32 JIT supports the same features and instructions as the
RV64 JIT, with the following exceptions:
- ALU64 DIV/MOD: Requires loops to implement on 32-bit hardware.
- BPF_XADD | BPF_DW: There's no 8-byte atomic instruction in RV32.
These features are also unsupported on other BPF JITs for 32-bit
architectures.
Testing:
- lib/test_bpf.c
test_bpf: Summary: 378 PASSED, 0 FAILED, [349/366 JIT'ed]
test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED
The tests that are not JITed are all due to use of 64-bit div/mod
or 64-bit xadd.
- tools/testing/selftests/bpf/test_verifier.c
Summary: 1415 PASSED, 122 SKIPPED, 43 FAILED
Tested both with and without BPF JIT hardening.
This is the same set of tests that pass using the BPF interpreter
with the JIT disabled.
Verification and synthesis:
We developed the RV32 JIT using our automated verification tool,
Serval. We have used Serval in the past to verify patches to the
RV64 JIT. We also used Serval to superoptimize the resulting code
through program synthesis.
You can find the tool and a guide to the approach and results here:
https://github.com/uw-unsat/serval-bpf/tree/rv32-jit-v5
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20200305050207.4159-3-luke.r.nels@gmail.com
This patch factors out code that can be used by both the RV64 and RV32
BPF JITs to a common bpf_jit.h and bpf_jit_core.c.
Move struct definitions and macro-like functions to header. Rename
rv_sb_insn/rv_uj_insn to rv_b_insn/rv_j_insn to match the RISC-V
specification.
Move reusable functions emit_body() and bpf_int_jit_compile() to
bpf_jit_core.c with minor simplifications. Rename emit_insn() and
build_{prologue,epilogue}() to be prefixed with "bpf_jit_" as they are
no longer static.
Rename bpf_jit_comp.c to bpf_jit_comp64.c to be more explicit.
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20200305050207.4159-2-luke.r.nels@gmail.com
When looking for the memblock where the kernel lives, we should check
that the memory range associated to the memblock entirely comprises the
kernel image and not only intersects with it.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for
a nommu kernel. Since the sparsemem model does not make sense anyway
for the nommu case, do not allow selecting this option to always use
the flatmem model.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
LLVM's integrated assembler doesn't support the LOCAL directive, which we're
using when generating our uaccess fixup tables. Luckily the table fragment is
small enough that there's only one internal symbol, so using a relative symbol
reference doesn't really complicate anything.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
These are only used once, and when reading the code I've always found them to
be more of a headache than a benefit. While they were never worth removing
before, LLVM's integrated assembler doesn't support LOCAL so rather that trying
to figure out how to refactor the macros it seems saner to just inline them.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
GCC allows users to hint to the register allocation that a variable should be
placed in a register by using a syntax along the lines of
function(...) {
register long in_REG __asm__("REG");
}
We've abused this a bit throughout the RISC-V port to access fixed registers
directly as C variables. In practice it's never going to blow up because GCC
isn't going to allocate these registers, but it's not a well defined syntax so
we really shouldn't be relying upon this. Luckily there is a very similar but
well defined syntax that allows us to still access these registers directly as
C variables, which is to simply declare the register variables globally. For
fixed variables this doesn't change the ABI.
LLVM disallows this ambiguous syntax, so this isn't just strictly a formatting
change.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
I don't know why we were doing this, as it's been there since the beginning.
After d841f729e655 ("riscv: force hart_lottery to put in .sdata section") my
guess would be that it made the kernel boot and we forgot to fix it more
cleanly.
The default .bss segment already contains the .sbss section, so we don't need
to do anything additional to ensure the symbols in .sbss continue to work.
Tested-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
In PIC code model, the zero initialized data always be put in .bss
section, so when building kernel as PIE, the hart_lottery won't present
in small data section, and it causes more than one harts to get the
lottery, because the main hart clears the content of .bss section
immediately after it getting the lottery.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[Palmer: added a comment]
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
According to init/Kconfig:
"sys_sysfs is an obsolete system call no longer supported in libc.
Note that disabling this option is more secure but might break
compatibility with some systems."
This syscall is not required for new architectures. Since the config
defaults to 'y'. Set this to 'n' exlicitly.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The only call path is:
__access_remote_vm -> copy_to_user_page -> flush_icache_user_range
Seems it's ok to use flush_icache_mm instead of flush_icache_all and
it could reduce flush_icache_all called on other harts.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
[Palmer: git-am wouldn't apply the patch, I did so manually]
Fixes: 08f051eda3 ("RISC-V: Flush I$ when making a dirty page executable")
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
All the loaded module locates in the region [＆_end-2G，VMALLOC_END] at
runtime, so the distance from the module start to the end of the kernel
image does not exceed 2GB. Hence, the code model of the kernel module can
be changed to medany to improve the performance data access.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The compiler uses the PIC-relative method to access static variables
instead of GOT when the code model is PIC. Therefore, the limitation of
the access range from the instruction to the symbol address is +-2GB.
Under this circumstance, the kernel cannot load a kernel module if this
module has static per-CPU symbols declared by DEFINE_PER_CPU(). The reason
is that kernel relocates the .data..percpu section of the kernel module to
the end of kernel's .data..percpu. Hence, the distance between the per-CPU
symbols and the instruction will exceed the 2GB limits. To solve this
problem, the kernel should place the loaded module in the memory area
[&_end-2G, VMALLOC_END].
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Suggested-by: Alexandre Ghiti <alex@ghiti.fr>
Suggested-by: Anup Patel <anup@brainfault.org>
Tested-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Carlos de Paula <me@carlosedp.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Each page table should be created by allocating a complete page size
for it. Otherwise, the content of the page table would be corrupted
somewhere through memory allocation which allocates the memory at the
middle of the page table for other use.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Tell git to not track the compiled boot/loader and boot/loader.lds
files.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Historically, we have been enabling all interrupts for each
HART in trap_init(). Ideally, we should only enable M-mode
interrupts for M-mode kernel and S-mode interrupts for S-mode
kernel in trap_init().
Currently, we get suprious S-mode interrupts on Kendryte K210
board running M-mode NO-MMU kernel because we are enabling all
interrupts in trap_init(). To fix this, we only enable software
and external interrupt in trap_init(). In future, trap_init()
will only enable software interrupt and PLIC driver will enable
external interrupt using CPU notifiers.
Fixes: a4c3733d32 ("riscv: abstract out CSR names for supervisor vs machine mode")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Palmer Dabbelt <palmerdabbelt@google.com> [QMEU virt machine with SMP]
[Palmer: Move the Fixes up to a newer commit]
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When the kernel is running in S-mode, the expectation is that the
bootloader or SBI layer will configure the PMP to allow the kernel to
access physical memory. But, when the kernel is running in M-mode and is
started with the ELF "loader", there's probably no bootloader or SBI layer
involved to configure the PMP. Thus, we need to configure the PMP
ourselves to enable the kernel to access all regions.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
- Enable CMA
- Add support for MB v11
- Defconfig updates
- Minor fixes
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXjlJ1gAKCRDKSWXLKUoM
IWy9AJ4tauV9sUb+zNadrYxI+2zemRstUwCfQ49LG4kHpFCv8ldSTmhBPJY/3MI=
=QpT4
-----END PGP SIGNATURE-----
Merge tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull Microblaze update from Michal Simek:
- enable CMA
- add support for MB v11
- defconfig updates
- minor fixes
* tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Add ID for Microblaze v11
microblaze: Prevent the overflow of the start
microblaze: Wire CMA allocator
asm-generic: Make dma-contiguous.h a mandatory include/asm header
microblaze: Sync defconfig with latest Kconfig layout
microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers
microblaze: Align comments with register usage
dma-continuguous.h is generic for all architectures except arm32 which has
its own version.
Similar change was done for msi.h by commit a1b39bae16
("asm-generic: Make msi.h a mandatory include/asm header")
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/linux-arm-kernel/20200117080446.GA8980@lst.de/T/#m92bb56b04161057635d4142e1b3b9b6b0a70122e
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # for arch/riscv
walk_page_range() is going to be allowed to walk page tables other than
those of user space. For this it needs to know when it has reached a
'leaf' entry in the page tables. This information is provided by the
p?d_leaf() functions/macros.
For riscv a page is a leaf page when it has a read, write or execute bit
set on it.
Link: http://lkml.kernel.org/r/20191218162402.45610-8-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Zong Li <zong.li@sifive.com>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> [arch/riscv]
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This tag contains a handful of patches that I'd like to target for this merge
window:
* Support for kasan.
* 32-bit physical addresses on rv32i-based systems.
* Support for CONFIG_DEBUG_VIRTUAL
* DT entry for the FU540 GPIO controller, which has recently had a device
driver merged.
These boot a buildroot-based system on QEMU's virt board for me.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl4xncwTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYibh5D/oCzcibEN/73fHCd5kgoAasX9o3ZmW/
i/GVcVAW7B2E0kpRheGbAisc2/E9o7qFTbji2cVFfApGYgjHV5tUTYbC9zIhxmQq
FW4fKwx/u6QnM8eW7gvOr7do6QFPC86dWqN5LN7g4ZfgamIPFBMUJgX4Ev/0zeJ8
zBZ3CHIGFID7uG8cyVmzO2PwFzedi7CuKVNRXggDcZgYM3+LXToevY05/9Nu1asA
i2T4IrLzB40pBmv5PxRDC1aNpHt5+fOuLb1kNYa8kWG/zj95kmeSirVIyvlbCQgX
VN6Za9z3EH/xu6zD2dlaSDrvbAQdY7fRPuvXyg/ZbJ3Z0daxt0JVj8iXVVWW3juP
9/DeQ/KiNOJ5LwnRjr6/uuxlzqlDNrzp2DSrpGzXvKhfgvDnKObX+HnND78aj/XJ
UPQ7Ef/wgOuM+IYFLYb2rdb65mFZ0Y+F7efAdXQTGlKMkKiGw9ci/oC9j/EG3TG1
cFNUY0mNJKJ8RNMUyvujzp/38si5Q7CN4/v/P80P9DOhOuZvSTW1YSAUUh6VZJEt
XoDrUIrKQPA+vuXcfUCk6ooBQorqzarwKYOilF7Pw7KHy4yZhz4aFbzi/VxJDNGI
p0UGfTB5te5u+l78dFm+Uigq4Q87xZ1byo4VXj9i/Jb2IvbxEbnDWjCHKmeugfUF
9PEtubl9UkKd2Q==
=W7f7
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains a handful of patches for this merge window:
- Support for kasan
- 32-bit physical addresses on rv32i-based systems
- Support for CONFIG_DEBUG_VIRTUAL
- DT entry for the FU540 GPIO controller, which has recently had a
device driver merged
These boot a buildroot-based system on QEMU's virt board for me"
* tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: Add DT support for SiFive FU540 GPIO driver
riscv: mm: add support for CONFIG_DEBUG_VIRTUAL
riscv: keep 32-bit kernel to 32-bit phys_addr_t
kasan: Add riscv to KASAN documentation.
riscv: Add KASAN support
kasan: No KASAN's memmove check if archs don't have it.
couple of things of note:
- Conversion of the NFS documentation to RST
- A new document on how to help with documentation (and a maintainer
profile entry too)
Plus the usual collection of typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl4wnWwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YFPIH/069z5bJMrT3QRzENu8A9Elz76IXoy7pJOmJ
53Ml5+c4sYpvV3o6d9n5TSvdy1pH0Shw73FbJzUIMj0ZCcHysWVO1eBDlcj8soJQ
UonCXbKc+30AJBoKZqAC3jjFw0/fXwD1x+GzQo+l0LMQDOc0i0Luv8/riR5c9hEO
5TOXB2GyhHnbSFxzcN9afmBsuNz1cPa/fg5q6zL+5Q/fUUOJ6IcYwq165P2EwZdm
KRah299VU/XhrYlHJX7OZX3ck9+PaYURSpv4KH81J4jhmoBWAw5jPt77Qw8aN3w9
LcNip+qgpx9wC7OgBiqdJkKcvsNy76pfDhUOj+XarGisA8031d0=
=9m/7
-----END PGP SIGNATURE-----
Merge tag 'docs-5.6' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively quiet cycle for documentation, but there's
still a couple of things of note:
- Conversion of the NFS documentation to RST
- A new document on how to help with documentation (and a maintainer
profile entry too)
Plus the usual collection of typo fixes, etc"
* tag 'docs-5.6' of git://git.lwn.net/linux: (40 commits)
docs: filesystems: add overlayfs to index.rst
docs: usb: remove some broken references
scripts/find-unused-docs: Fix massive false positives
docs: nvdimm: use ReST notation for subsection
zram: correct documentation about sysfs node of huge page writeback
Documentation: zram: various fixes in zram.rst
Add a maintainer entry profile for documentation
Add a document on how to contribute to the documentation
docs: Keep up with the location of NoUri
Documentation: Call out example SYM_FUNC_* usage as x86-specific
Documentation: nfs: fault_injection: convert to ReST
Documentation: nfs: pnfs-scsi-server: convert to ReST
Documentation: nfs: convert pnfs-block-server to ReST
Documentation: nfs: idmapper: convert to ReST
Documentation: convert nfsd-admin-interfaces to ReST
Documentation: nfs-rdma: convert to ReST
Documentation: nfsroot.rst: COSMETIC: refill a paragraph
Documentation: nfsroot.txt: convert to ReST
Documentation: convert nfs.txt to ReST
Documentation: filesystems: convert vfat.txt to RST
...
Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFRBg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn2VACgkge7vTeUNeZFc+6F4NWphAQ5tCQAoK/MMbU6
0O8ef7PjFwCU4s227UTv
=6m40
-----END PGP SIGNATURE-----
Merge tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
tty: n_hdlc: Use flexible-array member and struct_size() helper
tty: baudrate: SPARC supports few more baud rates
tty: baudrate: Synchronise baud_table[] and baud_bits[]
tty: serial: meson_uart: Add support for kernel debugger
serial: imx: fix a race condition in receive path
serial: 8250_bcm2835aux: Document struct bcm2835aux_data
serial: 8250_bcm2835aux: Use generic remapping code
serial: 8250_bcm2835aux: Allocate uart_8250_port on stack
serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Fix line mismatch on driver unbind
serial_core: Remove unused member in uart_port
vt: Correct comment documenting do_take_over_console()
vt: Delete comment referencing non-existent unbind_con_driver()
arch/xtensa/setup: Drop dummy_con initialization
arch/x86/setup: Drop dummy_con initialization
arch/unicore32/setup: Drop dummy_con initialization
arch/sparc/setup: Drop dummy_con initialization
arch/sh/setup: Drop dummy_con initialization
arch/s390/setup: Drop dummy_con initialization
...
Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
Pull scheduler updates from Ingo Molnar:
"These were the main changes in this cycle:
- More -rt motivated separation of CONFIG_PREEMPT and
CONFIG_PREEMPTION.
- Add more low level scheduling topology sanity checks and warnings
to filter out nonsensical topologies that break scheduling.
- Extend uclamp constraints to influence wakeup CPU placement
- Make the RT scheduler more aware of asymmetric topologies and CPU
capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y
- Make idle CPU selection more consistent
- Various fixes, smaller cleanups, updates and enhancements - please
see the git log for details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
sched/fair: Define sched_idle_cpu() only for SMP configurations
sched/topology: Assert non-NUMA topology masks don't (partially) overlap
idle: fix spelling mistake "iterrupts" -> "interrupts"
sched/fair: Remove redundant call to cpufreq_update_util()
sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled
sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP
sched/fair: calculate delta runnable load only when it's needed
sched/cputime: move rq parameter in irqtime_account_process_tick
stop_machine: Make stop_cpus() static
sched/debug: Reset watchdog on all CPUs while processing sysrq-t
sched/core: Fix size of rq::uclamp initialization
sched/uclamp: Fix a bug in propagating uclamp value in new cgroups
sched/fair: Load balance aggressively for SCHED_IDLE CPUs
sched/fair : Improve update_sd_pick_busiest for spare capacity case
watchdog: Remove soft_lockup_hrtimer_cnt and related code
sched/rt: Make RT capacity-aware
sched/fair: Make EAS wakeup placement consider uclamp restrictions
sched/fair: Make task_fits_capacity() consider uclamp restrictions
sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with()
sched/uclamp: Make uclamp util helpers use and return UL values
...
While rv32 technically has 34-bit physical addresses, no current platforms
use it and it's likely to shake out driver bugs.
Let's keep 64-bit phys_addr_t off on 32-bit builds until one shows up,
since other work will be needed to make such a system useful anyway.
PHYS_ADDR_T_64BIT is def_bool 64BIT, so just remove the select.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch ports the feature Kernel Address SANitizer (KASAN).
Note: The start address of shadow memory is at the beginning of kernel
space, which is 2^64 - (2^39 / 2) in SV39. The size of the kernel space is
2^38 bytes so the size of shadow memory should be 2^38 / 8. Thus, the
shadow memory would not overlap with the fixmap area.
There are currently two limitations in this port,
1. RV64 only: KASAN need large address space for extra shadow memory
region.
2. KASAN can't debug the modules since the modules are allocated in VMALLOC
area. We mapped the shadow memory, which corresponding to VMALLOC area, to
the kasan_early_shadow_page because we don't have enough physical space for
all the shadow memory corresponding to VMALLOC area.
Signed-off-by: Nick Hu <nickhu@andestech.com>
Reported-by: Greentime Hu <green.hu@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The existing __lshrti3 was really inefficient, and the other two helpers
are also needed to compile some modules.
Add the missing versions, and export all of the symbols like arm64
already does.
This code is based on the assembly generated by libgcc builds.
This fixes a build break triggered by ubsan:
riscv64-unknown-linux-gnu-ld: lib/ubsan.o: in function `.L2':
ubsan.c:(.text.unlikely+0x38): undefined reference to `__ashlti3'
riscv64-unknown-linux-gnu-ld: ubsan.c:(.text.unlikely+0x42): undefined reference to `__ashrti3'
Signed-off-by: Olof Johansson <olof@lixom.net>
[paul.walmsley@sifive.com: use SYM_FUNC_{START,END} instead of
ENTRY/ENDPROC; note libgcc origin]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Temporary files used in the VDSO build process linger on even after make
mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp.
Delete them once they're no longer needed.
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The code in secondary_park is currently placed in the .init section. The
kernel reclaims and clears this code when it finishes booting. That
causes the cores parked in it to go to somewhere unpredictable, so we
move this function out of init to make sure the cores stay looping there.
The instruction bgeu a0, t0, .Lsecondary_park may have "a relocation
truncated to fit" issue during linking time. It is because that sections
are too far to jump. Let's use tail to jump to the .Lsecondary_park.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup.patel@sifive.com>
Cc: Andreas Schwab <schwab@suse.de>
Cc: stable@vger.kernel.org
Fixes: 76d2a0493a ("RISC-V: Init and Halt Code")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset.
Drop it from arch setup code.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20191218214506.49252-19-nivedita@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two fixes for RISC-V:
- Clear FP registers during boot when FP support is present, rather than
when they aren't present
- Move the header files associated with the SiFive L2 cache controller
to drivers/soc (where the code was recently moved)
-----BEGIN PGP SIGNATURE-----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=qvPe
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Two fixes for RISC-V:
- Clear FP registers during boot when FP support is present, rather
than when they aren't present
- Move the header files associated with the SiFive L2 cache
controller to drivers/soc (where the code was recently moved)"
* tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup obvious bug for fp-regs reset
riscv: move sifive_l2_cache.h to include/soc
CSR_MISA is defined in Privileged Architectures' spec: 3.1.1 Machine
ISA Register misa. Every bit:1 indicate a feature, so we should beqz
reset_done when there is no F/D bit in csr_misa register.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
[paul.walmsley@sifive.com: fix typo in commit message]
Fixes: 9e80635619 ("riscv: clear the instruction cache and all registers when booting")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The commit 9209fb5189 ("riscv: move sifive_l2_cache.c to drivers/soc")
moves the sifive L2 cache driver to driver/soc. It did not move the
header file along with the driver. Therefore this patch moves the header
file to driver/soc
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: updated to fix the include guard]
Fixes: 9209fb5189 ("riscv: move sifive_l2_cache.c to drivers/soc")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The ungrafting from PRIO bug fixes in net, when merged into net-next,
merge cleanly but create a build failure. The resolution used here is
from Petr Machata.
Signed-off-by: David S. Miller <davem@davemloft.net>
"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently
generic macro name that it's used by several source files across the
Linux code base. Some of these other files ultimately include the
arch/riscv CSR include file, causing collisions. Fix by prefixing the
RISC-V csr.h IRQ_ macro names with an RV_ prefix.
Fixes: a4c3733d32 ("riscv: abstract out CSR names for supervisor vs machine mode")
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The condition should be logical NOT to assign the hook address to parent
address. Because the return value 0 of function_graph_enter upon
success.
Fixes: e949b6db51 (riscv/function_graph: Simplify with function_graph_enter())
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This patch enables GCOV code coverage measurement on RISC-V.
Lightly tested on QEMU and Hifive Unleashed board, seems to work as
expected.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
__pa_symbol is the marcro that should be used for kernel symbols. It is
also a pre-requisite for DEBUG_VIRTUAL which will do bounds checking.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This is needed by LKDTM (crash dump test module), it calls
flush_icache_range(), which on RISC-V turns into flush_icache_all(). On
other architectures, the actual implementation is exported, so follow
that precedence and export it here too.
Fixes build of CONFIG_LKDTM that fails with:
ERROR: "flush_icache_all" [drivers/misc/lkdtm/lkdtm.ko] undefined!
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Running "stress-ng --enosys 4 -t 20 -v" showed a large number of kernel oops
with "Unable to handle kernel paging request at virtual address" message. This
happens when enosys stressor starts testing random non-valid syscalls.
I forgot to redirect any syscall below -1 to sys_ni_syscall.
With the patch kernel oops messages are gone while running stress-ng enosys
stressor.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Fixes: 5340627e3f ("riscv: add support for SECCOMP and SECCOMP_FILTER")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
When support for !MMU was added, the declaration of
__asm_copy_to_user() & __asm_copy_from_user() were #ifdefed
out hence their EXPORT_SYMBOL() give an error message like:
.../riscv_ksyms.c:13:15: error: '__asm_copy_to_user' undeclared here
.../riscv_ksyms.c:14:15: error: '__asm_copy_from_user' undeclared here
Since these symbols are not defined with !MMU it's wrong to export them.
Same for __clear_user() (even though this one is also declared in
include/asm-generic/uaccess.h and thus doesn't give an error message).
Fix this by doing the EXPORT_SYMBOL() directly where these symbols
are defined: inside lib/uaccess.S itself.
Fixes: 6bd33e1ece ("riscv: fix compile failure with EXPORT_SYMBOL() & !MMU")
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-12-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 127 non-merge commits during the last 17 day(s) which contain
a total of 110 files changed, 6901 insertions(+), 2721 deletions(-).
There are three merge conflicts. Conflicts and resolution looks as follows:
1) Merge conflict in net/bpf/test_run.c:
There was a tree-wide cleanup c593642c8b ("treewide: Use sizeof_field() macro")
which gets in the way with b590cb5f80 ("bpf: Switch to offsetofend in
BPF_PROG_TEST_RUN"):
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) +
sizeof_field(struct __sk_buff, priority),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority),
>>>>>>> 7c8dce4b16
There are a few occasions that look similar to this. Always take the chunk with
offsetofend(). Note that there is one where the fields differ in here:
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) +
sizeof_field(struct __sk_buff, tstamp),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs),
>>>>>>> 7c8dce4b16
Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to
850a88cc40 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN").
2) Merge conflict in arch/riscv/net/bpf_jit_comp.c:
(I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.)
<<<<<<< HEAD
if (is_13b_check(off, insn))
return -1;
emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
=======
emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx);
>>>>>>> 7c8dce4b16
Result should look like:
emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx);
3) Merge conflict in arch/riscv/include/asm/pgtable.h:
<<<<<<< HEAD
=======
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
#define vmemmap ((struct page *)VMEMMAP_START)
>>>>>>> 7c8dce4b16
Only take the BPF_* defines from there and move them higher up in the
same file. Remove the rest from the chunk. The VMALLOC_* etc defines
got moved via 01f52e16b8 ("riscv: define vmemmap before pfn_to_page
calls"). Result:
[...]
#define __S101 PAGE_READ_EXEC
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
[...]
Let me know if there are any other issues.
Anyway, the main changes are:
1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific
to a provided BPF object file. This provides an alternative, simplified API
compared to standard libbpf interaction. Also, add libbpf extern variable
resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko.
2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by
generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also,
add various BPF riscv JIT improvements, from Björn Töpel.
3) Extend bpftool to allow matching BPF programs and maps by name,
from Paul Chaignon.
4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI
flag for allowing updates without service interruption, from Andrey Ignatov.
5) Cleanup and simplification of ring access functions for AF_XDP with a
bonus of 0-5% performance improvement, from Magnus Karlsson.
6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of
audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa.
7) Move and extend test_select_reuseport into BPF program tests under
BPF selftests, from Jakub Sitnicki.
8) Various BPF sample improvements for xdpsock for customizing parameters
to set up and benchmark AF_XDP, from Jay Jayatheerthan.
9) Improve libbpf to provide a ulimit hint on permission denied errors.
Also change XDP sample programs to attach in driver mode by default,
from Toke Høiland-Jørgensen.
10) Extend BPF test infrastructure to allow changing skb mark from tc BPF
programs, from Nikita V. Shirokov.
11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King.
12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after
libbpf conversion, from Jesper Dangaard Brouer.
13) Minor misc improvements from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Several fixes, and one cleanup, for RISC-V.
Fixes:
- Fix an error in a Kconfig file that resulted in an undefined Kconfig
option "CONFIG_CONFIG_MMU"
- Fix undefined Kconfig option "CONFIG_CONFIG_MMU"
- Fix scratch register clearing in M-mode (affects nommu users)
- Fix a mismerge on my part that broke the build for
CONFIG_SPARSEMEM_VMEMMAP users
Cleanups:
- Move SiFive L2 cache-related code to drivers/soc, per request
-----BEGIN PGP SIGNATURE-----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=TpM4
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Several fixes, and one cleanup, for RISC-V.
Fixes:
- Fix an error in a Kconfig file that resulted in an undefined
Kconfig option "CONFIG_CONFIG_MMU"
- Fix undefined Kconfig option "CONFIG_CONFIG_MMU"
- Fix scratch register clearing in M-mode (affects nommu users)
- Fix a mismerge on my part that broke the build for
CONFIG_SPARSEMEM_VMEMMAP users
Cleanup:
- Move SiFive L2 cache-related code to drivers/soc, per request"
* tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: move sifive_l2_cache.c to drivers/soc
riscv: define vmemmap before pfn_to_page calls
riscv: fix scratch register clearing in M-mode.
riscv: Fix use of undefined config option CONFIG_CONFIG_MMU
Pull networking fixes from David Miller:
1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
including adding a missing ipv6 match description.
2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
Bhat.
3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.
4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.
5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.
6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
Chaignon.
7) Multicast MAC limit test is off by one in qede, from Manish Chopra.
8) Fix established socket lookup race when socket goes from
TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
RCU grace period. From Eric Dumazet.
9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.
10) Fix active backup transition after link failure in bonding, from
Mahesh Bandewar.
11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.
12) Fix wrong interface passed to ->mac_link_up(), from Russell King.
13) Fix DSA egress flooding settings in b53, from Florian Fainelli.
14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.
15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.
16) Reject invalid MTU values in stmmac, from Jose Abreu.
17) Fix refcount leak in error path of u32 classifier, from Davide
Caratti.
18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
Kaseorg.
19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.
20) Disable hardware GRO when XDP is attached to qede, frm Manish
Chopra.
21) Since we encode state in the low pointer bits, dst metrics must be
at least 4 byte aligned, which is not necessarily true on m68k. Add
annotations to fix this, from Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
sfc: Include XDP packet headroom in buffer step size.
sfc: fix channel allocation with brute force
net: dst: Force 4-byte alignment of dst_metrics
selftests: pmtu: fix init mtu value in description
hv_netvsc: Fix unwanted rx_table reset
net: phy: ensure that phy IDs are correctly typed
mod_devicetable: fix PHY module format
qede: Disable hardware gro when xdp prog is installed
net: ena: fix issues in setting interrupt moderation params in ethtool
net: ena: fix default tx interrupt moderation interval
net/smc: unregister ib devices in reboot_event
net: stmmac: platform: Fix MDIO init for platforms without PHY
llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
net: hisilicon: Fix a BUG trigered by wrong bytes_compl
net: dsa: ksz: use common define for tag len
s390/qeth: don't return -ENOTSUPP to userspace
s390/qeth: fix promiscuous mode after reset
s390/qeth: handle error due to unsupported transport mode
cxgb4: fix refcount init for TC-MQPRIO offload
tc-testing: initial tdc selftests for cls_u32
...
The sifive_l2_cache.c is in no way related to RISC-V architecture
memory management. It is a little stub driver working around the fact
that the EDAC maintainers prefer their drivers to be structured in a
certain way that doesn't fit the SiFive SOCs.
Move the file to drivers/soc and add a Kconfig option for it, as well
as the whole drivers/soc boilerplate for CONFIG_SOC_SIFIVE.
Fixes: a967a289f1 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
[paul.walmsley@sifive.com: keep the MAINTAINERS change specific to the L2$ controller code]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
pfn_to_page & page_to_pfn depend on vmemmap being available before the calls
if kernel is configured with CONFIG_SPARSEMEM_VMEMMAP=y. This was caused
by NOMMU changes which moved vmemmap definition bellow functions definitions
calling pfn_to_page & page_to_pfn.
Noticed while compiled 5.5-rc2 kernel for Fedora/RISCV.
v2:
- Add a comment for vmemmap in source
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Fixes: 6bd33e1ece ("riscv: add nommu support")
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This patch fixes that the sscratch register clearing in M-mode. It cleared
sscratch register in M-mode, but it should clear mscratch register. That will
cause kernel trap if the CPU core doesn't support S-mode when trying to access
sscratch.
Fixes: 9e80635619 ("riscv: clear the instruction cache and all registers when booting")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
In Kconfig files, config options are written without the CONFIG_ prefix.
Fixes: 6bd33e1ece ("riscv: add nommu support")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
There are some typos in boot image header and riscv boot documentation.
Fix the typos.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Link: https://lore.kernel.org/r/20191009010637.9955-1-atish.patra@wdc.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add missing uapi header the BPF_PROG_TYPE_PERF_EVENT programs by
exporting struct user_regs_struct instead of struct pt_regs which is
in-kernel only.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191216091343.23260-9-bjorn.topel@gmail.com
Instead of using emit_imm() and emit_jalr() which can expand to six
instructions, start using jal or auipc+jalr.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191216091343.23260-8-bjorn.topel@gmail.com
This commit makes sure that the JIT images is kept close to the kernel
text, so BPF calls can use relative calling with auipc/jalr or jal
instead of loading the full 64-bit address and jalr.
The BPF JIT image region is 128 MB before the kernel text.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191216091343.23260-7-bjorn.topel@gmail.com
This commit add support for far (offset > 21b) jumps and exits.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Luke Nelson <lukenels@cs.washington.edu>
Link: https://lore.kernel.org/bpf/20191216091343.23260-5-bjorn.topel@gmail.com
This commit adds branch relaxation to the BPF JIT, and with that
support for far (offset greater than 12b) branching.
The branch relaxation requires more than two passes to converge. For
most programs it is three passes, but for larger programs it can be
more.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Luke Nelson <lukenels@cs.washington.edu>
Link: https://lore.kernel.org/bpf/20191216091343.23260-3-bjorn.topel@gmail.com
The BPF JIT incorrectly clobbered the a0 register, and did not flag
usage of s5 register when BPF stack was being used.
Fixes: 2353ecc6f9 ("bpf, riscv: add BPF JIT for RV64G")
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191216091343.23260-2-bjorn.topel@gmail.com
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime. In addition, a test was recently added, in tailcalls2,
to check this limit.
This patch updates the tail call limit in RISC-V's JIT compiler to allow
33 tail calls. I tested it using the above selftest on an emulated
RISCV64.
Fixes: 2353ecc6f9 ("bpf, riscv: add BPF JIT for RV64G")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/966fe384383bf23a0ee1efe8d7291c78a3fb832b.1575916815.git.paul.chaignon@gmail.com
In the x86 MM code we'd like to untangle various types of historic
header dependency spaghetti, but for this we'd need to pass to
the generic vmalloc code various vmalloc related defines that
customarily come via the <asm/page.h> low level arch header.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is some warning if TTY is not enabled, and lead to
build error, only select serial sifive if TTY enabled, and
this also makes randconfig happy.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[paul.walmsley@sifive.com: updated to apply]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The Makefile addition for the flat image loader missed an obj prefix.
For most parallel builds this worked out fine, but with -j1 the dependency
wasn't fulfilled and thus fails:
arch/riscv/boot/loader.S: Assembler messages:
arch/riscv/boot/loader.S:7: Error: file not found: arch/riscv/boot/Image
Fixes: 405fe7aa0d ("riscv: provide a flat image loader")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Switch the entry code over to use CONFIG_PREEMPTION.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # for arch/riscv
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20191015191821.11479-17-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A few minor RISC-V updates for v5.5-rc1 that arrived late.
New features:
- Dump some kernel virtual memory map details to the console if
CONFIG_DEBUG_VM is enabled
Other improvements:
- Enable more debugging options in the primary defconfigs
Cleanups:
- Clean up Kconfig indentation
-----BEGIN PGP SIGNATURE-----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=IXlq
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
"A few minor RISC-V updates for v5.5-rc1 that arrived late.
New features:
- Dump some kernel virtual memory map details to the console if
CONFIG_DEBUG_VM is enabled
Other improvements:
- Enable more debugging options in the primary defconfigs
Cleanups:
- Clean up Kconfig indentation"
* tag 'riscv/for-v5.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Add address map dumper
riscv: defconfigs: enable more debugging options
riscv: defconfigs: enable debugfs
riscv: Fix Kconfig indentation
-----BEGIN PGP SIGNATURE-----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=uUXw
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Warn if a host bridge has no NUMA info (Yunsheng Lin)
- Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
Efremov)
Resource management:
- Fix boot-time Embedded Controller GPE storm caused by incorrect
resource assignment after ACPI Bus Check Notification (Mika
Westerberg)
- Protect pci_reassign_bridge_resources() against concurrent
addition/removal (Benjamin Herrenschmidt)
- Fix bridge dma_ranges resource list cleanup (Rob Herring)
- Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
the MMIO and prefetchable MMIO window sizes of hotplug bridges
independently (Nicholas Johnson)
- Fix MMIO/MMIO_PREF window assignment that assigned more space than
desired (Nicholas Johnson)
- Only enforce bus numbers from bridge EA if the bridge has EA
devices downstream (Subbaraya Sundeep)
- Consolidate DT "dma-ranges" parsing and convert all host drivers to
use shared parsing (Rob Herring)
Error reporting:
- Restore AER capability after resume (Mayurkumar Patel)
- Add PoisonTLPBlocked AER counter (Rajat Jain)
- Use for_each_set_bit() to simplify AER code (Andy Shevchenko)
- Fix AER kernel-doc (Andy Shevchenko)
- Add "pcie_ports=dpc-native" parameter to allow native use of DPC
even if platform didn't grant control over AER (Olof Johansson)
Hotplug:
- Avoid returning prematurely from sysfs requests to enable or
disable a PCIe hotplug slot (Lukas Wunner)
- Don't disable interrupts twice when suspending hotplug ports (Mika
Westerberg)
- Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
Westerberg)
Power management:
- Remove unnecessary ASPM locking (Bjorn Helgaas)
- Add support for disabling L1 PM Substates (Heiner Kallweit)
- Allow re-enabling Clock PM after it has been disabled (Heiner
Kallweit)
- Add sysfs attributes for controlling ASPM link states (Heiner
Kallweit)
- Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
sysfs files (Heiner Kallweit)
- Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
USB 2.0 or 1.1 connect events (Kai-Heng Feng)
- Move power state check out of pci_msi_supported() (Bjorn Helgaas)
- Fix incorrect MSI-X masking on resume and revert related nvme quirk
for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)
- Always return devices to D0 when thawing to fix hibernation with
drivers like mlx4 that used legacy power management (previously we
only did it for drivers with new power management ops) (Dexuan Cui)
- Clear PCIe PME Status even for legacy power management (Bjorn
Helgaas)
- Fix PCI PM documentation errors (Bjorn Helgaas)
- Use dev_printk() for more power management messages (Bjorn Helgaas)
- Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)
- Convert xen-platform from legacy to generic power management (Bjorn
Helgaas)
- Removed unused .resume_early() and .suspend_late() legacy power
management hooks (Bjorn Helgaas)
- Rearrange power management code for clarity (Rafael J. Wysocki)
- Decode power states more clearly ("4" or "D4" really refers to
"D3cold") (Bjorn Helgaas)
- Notice when reading PM Control register returns an error (~0)
instead of interpreting it as being in D3hot (Bjorn Helgaas)
- Add missing link delays required by the PCIe spec (Mika Westerberg)
Virtualization:
- Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
Helgaas)
- Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
previously didn't recognize that) (Kuppuswamy Sathyanarayanan)
- Allow VFs to use PASID (the PF PASID capability is shared by the
VFs, but the code previously didn't recognize that) (Kuppuswamy
Sathyanarayanan)
- Disconnect PF and VF ATS enablement, since ATS in PFs and
associated VFs can be enabled independently (Kuppuswamy
Sathyanarayanan)
- Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)
- Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)
- Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
Wilczynski)
- Remove unused PRI and PASID stubs (Bjorn Helgaas)
- Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
interfaces that are only used by built-in IOMMU drivers (Bjorn
Helgaas)
- Hide PRI and PASID state restoration functions used only inside the
PCI core (Bjorn Helgaas)
- Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)
- Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)
- Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
Cherian)
- Fix the UPDCR register address in the Intel ACS quirk (Steffen
Liebergeld)
- Unify ACS quirk implementations (Bjorn Helgaas)
Amlogic Meson host bridge driver:
- Fix meson PERST# GPIO polarity problem (Remi Pommarel)
- Add DT bindings for Amlogic Meson G12A (Neil Armstrong)
- Fix meson clock names to match DT bindings (Neil Armstrong)
- Add meson support for Amlogic G12A SoC with separate shared PHY
(Neil Armstrong)
- Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
combo PHY (Neil Armstrong)
- Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)
- Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
(Neil Armstrong)
Broadcom iProc host bridge driver:
- Invalidate iProc PAXB address mapping before programming it
(Abhishek Shah)
- Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)
Cadence host bridge driver:
- Refactor Cadence PCIe host controller to use as a library for both
host and endpoint (Tom Joseph)
Freescale Layerscape host bridge driver:
- Add layerscape LS1028a support (Xiaowei Bao)
Intel VMD host bridge driver:
- Add VMD bus 224-255 restriction decode (Jon Derrick)
- Add VMD 8086:9A0B device ID (Jon Derrick)
- Remove Keith from VMD maintainer list (Keith Busch)
Marvell ARMADA 3700 / Aardvark host bridge driver:
- Use LTSSM state to build link training flag since Aardvark doesn't
implement the Link Training bit (Remi Pommarel)
- Delay before training Aardvark link in case PERST# was asserted
before the driver probe (Remi Pommarel)
- Fix Aardvark issues with Root Control reads and writes (Remi
Pommarel)
- Don't rely on jiffies in Aardvark config access path since
interrupts may be disabled (Remi Pommarel)
- Fix Aardvark big-endian support (Grzegorz Jaszczyk)
Marvell ARMADA 370 / XP host bridge driver:
- Make mvebu_pci_bridge_emul_ops static (Ben Dooks)
Microsoft Hyper-V host bridge driver:
- Add hibernation support for Hyper-V virtual PCI devices (Dexuan
Cui)
- Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
Cui)
- Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)
Mobiveil host bridge driver:
- Change mobiveil csr_read()/write() function names that conflict
with riscv arch functions (Kefeng Wang)
NVIDIA Tegra host bridge driver:
- Fix Tegra CLKREQ dependency programming (Vidya Sagar)
Renesas R-Car host bridge driver:
- Remove unnecessary header include from rcar (Andrew Murray)
- Tighten register index checking for rcar inbound range programming
(Marek Vasut)
- Fix rcar inbound range alignment calculation to improve packing of
multiple entries (Marek Vasut)
- Update rcar MACCTLR setting to match documentation (Yoshihiro
Shimoda)
- Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
(Yoshihiro Shimoda)
- Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
Horman)
Rockchip host bridge driver:
- Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
Murphy)
Socionext UniPhier host bridge driver:
- Set uniphier to host (RC) mode always (Kunihiko Hayashi)
Endpoint drivers:
- Fix endpoint driver sign extension problem when shifting page
number to phys_addr_t (Alan Mikhak)
Misc:
- Add NumaChip SPDX header (Krzysztof Wilczynski)
- Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)
- Remove unused includes (Krzysztof Wilczynski)
- Removed unused sysfs attribute groups (Ben Dooks)
- Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)
- Add PCIe Link Control 2 register field definitions to replace magic
numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)
- Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)
- Use pcie_capability_read_word() instead of pci_read_config_word()
in AMDGPU and Radeon CIK/SI (Frederick Lawler)
- Remove unused pci_irq_get_node() Greg Kroah-Hartman)
- Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
(Palmer Dabbelt, Michal Simek)
- Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
Helgaas)
- Fix bridge emulation big-endian support (Grzegorz Jaszczyk)
- Fix dwc find_next_bit() usage (Niklas Cassel)
- Fix pcitest.c fd leak (Hewenliang)
- Fix typos and comments (Bjorn Helgaas)
- Fix Kconfig whitespace errors (Krzysztof Kozlowski)"
* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
asm-generic: Make msi.h a mandatory include/asm header
Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
PCI/MSI: Fix incorrect MSI-X masking on resume
PCI/MSI: Move power state check out of pci_msi_supported()
PCI/MSI: Remove unused pci_irq_get_node()
PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
PCI: hv: Change pci_protocol_version to per-hbus
PCI: hv: Add hibernation support
PCI: hv: Reorganize the code in preparation of hibernation
MAINTAINERS: Remove Keith from VMD maintainer
PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
PCI/ASPM: Add sysfs attributes for controlling ASPM link states
PCI: Fix indentation
drm/radeon: Prefer pcie_capability_read_word()
drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
drm/radeon: Correct Transmit Margin masks
drm/amdgpu: Prefer pcie_capability_read_word()
PCI: uniphier: Set mode register to host mode
drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
...
- clean up various obsolete ioremap and iounmap variants
- add a new generic ioremap implementation and switch csky, nds32 and
riscv over to it
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl3cKcsLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYO1CRAAwFQigsbi0CqqshPWnP0owKV+HA4Xfz/lQZsd7SM/
BVXhKyDJQum6gp73dW025HCfjidTknsbdCUIP/LNUgAnop3lOlnB31/munDnJJ1H
6hB1pc+zB9VgbOe0A6TxtxPRm5aE33k1hZIZS99lOh7mY3FvF7mbkkbVoCjdS3Cq
a9bTX+X+esfUQ5GgaIc2zmz2GLkyFXIeVGs8/CoOX58ESCWQcVZrsQRompo4SgrI
jqwf47NzdmK8hW4mZ+jdQUiWiAmNs5+2om7Bvi/deFAIFUo1/hLHvQzqEGramq/j
5SPHax2gWAN3uWYP91QISkUAJWFydwgmUDoTO1M04ov4xLuBrqIQmc43tLjHo2UT
RwMozWJWN+gkB9zTIboqMPi2qcuDaWcCij7LwHl5zLxPTcOKsrALarL55BQ8MipQ
x6fpvskrQQvlArNTsRWFRUq0mCtkzE3wMZ9RR3AIETQL2hlAzB1S4gzhD+Z6WTYY
pXNgkunonVGxwyN/7iJTEl/mvF/+MynGcWqhrwHZLqncyhn/WJJ2USH3nAD1+yjp
v8v6UUeMXIjUsGAyfTjXy/WXAfwRuSC038AAFcmWKDdh08h4XvPHRficT4U8wr34
7WzGizHP9f1CqrhYL/4exhPY9X2Yb7HhsFd0bZGG0rRvSillPUp0b8s++m12QuQU
+VY=
=ooiA
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap
Pull generic ioremap support from Christoph Hellwig:
"This adds the remaining bits for an entirely generic ioremap and
iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant
mess of weird ioremap variants we had with no users outside the arch
code.
For now just the three newest ports use the code, but there is more
than a handful others that can be converted without too much work.
Summary:
- clean up various obsolete ioremap and iounmap variants
- add a new generic ioremap implementation and switch csky, nds32 and
riscv over to it"
* tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits)
nds32: use generic ioremap
csky: use generic ioremap
csky: remove ioremap_cache
riscv: use the generic ioremap code
lib: provide a simple generic ioremap implementation
sh: remove __iounmap
nios2: remove __iounmap
hexagon: remove __iounmap
m68k: rename __iounmap and mark it static
arch: rely on asm-generic/io.h for default ioremap_* definitions
asm-generic: don't provide ioremap for CONFIG_MMU
asm-generic: ioremap_uc should behave the same with and without MMU
xtensa: clean up ioremap
x86: Clean up ioremap()
parisc: remove __ioremap
nios2: remove __ioremap
alpha: remove the unused __ioremap wrapper
hexagon: clean up ioremap
ia64: rename ioremap_nocache to ioremap_uc
unicore32: remove ioremap_cached
...
New features:
- SECCOMP support
- nommu support
- SBI-less system support
- M-Mode support
- TLB flush optimizations
Other improvements:
- Pass the complete RISC-V ISA string supported by the CPU cores to
userspace, rather than redacting parts of it in the kernel
- Add platform DMA IP block data to the HiFive Unleashed board DT file
- Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image
compression formats, in line with other architectures
Cleanups:
- Remove unnecessary PTE_PARENT_SIZE macro
- Standardize include guard naming across arch/riscv
-----BEGIN PGP SIGNATURE-----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=nbwY
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"New features:
- SECCOMP support
- nommu support
- SBI-less system support
- M-Mode support
- TLB flush optimizations
Other improvements:
- Pass the complete RISC-V ISA string supported by the CPU cores to
userspace, rather than redacting parts of it in the kernel
- Add platform DMA IP block data to the HiFive Unleashed board DT
file
- Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image
compression formats, in line with other architectures
Cleanups:
- Remove unnecessary PTE_PARENT_SIZE macro
- Standardize include guard naming across arch/riscv"
* tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits)
riscv: provide a flat image loader
riscv: add nommu support
riscv: clear the instruction cache and all registers when booting
riscv: read the hart ID from mhartid on boot
riscv: provide native clint access for M-mode
riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00
riscv: add support for MMIO access to the timer registers
riscv: implement remote sfence.i using IPIs
riscv: cleanup the default power off implementation
riscv: poison SBI calls for M-mode
riscv: don't allow selecting SBI based drivers for M-mode
RISC-V: Add multiple compression image format.
riscv: clean up the macro format in each header file
riscv: Use PMD_SIZE to replace PTE_PARENT_SIZE
riscv: abstract out CSR names for supervisor vs machine mode
riscv: separate MMIO functions into their own header file
riscv: enter WFI in default_power_off() if SBI does not shutdown
RISC-V: Issue a tlb page flush if possible
RISC-V: Issue a local tlbflush if possible.
RISC-V: Do not invoke SBI call if cpumask is empty
...
