The cache bucket tracks the total number of MRs that exists, both inside
and outside of the cache. Removing a MR from the cache (by setting
cache_ent to NULL) without updating total_mrs will cause the tracking to
leak and be inflated.
Further fix the rereg_mr path to always destroy the MR. reg_create will
always overwrite all the MR data in mlx5_ib_mr, so the MR must be
completely destroyed, in all cases, before this function can be
called. Detach the MR from the cache and unconditionally destroy it to
avoid leaking HW mkeys.
Fixes: afd1417404 ("IB/mlx5: Use direct mkey destroy command upon UMR unreg failure")
Fixes: 56e11d628c ("IB/mlx5: Added support for re-registration of MRs")
Link: https://lore.kernel.org/r/20200310082238.239865-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are many bad APIs here that are accepting a cache bucket index
instead of a bucket pointer. Many of the callers already have a bucket
pointer, so this results in a lot of confusing uses of order2idx().
Pass the struct mlx5_cache_ent into add_keys(), remove_keys(), and
alloc_cached_mr().
Once the MR is in the cache, store the cache bucket pointer directly in
the MR, replacing the 'bool allocated_from cache'.
In the end there is only one place that needs to form index from order,
alloc_mr_from_cache(). Increase the safety of this function by disallowing
it from accessing cache entries in the ODP special area.
Link: https://lore.kernel.org/r/20200310082238.239865-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mkey variant calculation was spinlock protected to make it atomic, replace
that with one atomic variable.
Link: https://lore.kernel.org/r/20200310082238.239865-4-leon@kernel.org
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As mlx5_ib is the only user of the mlx5_core_create_mkey_cb, move the
logic inside mlx5_ib and cleanup the code in mlx5_core.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
mkey variant is not required for mlx5_core use, move the mkey variant
counter to mlx5_ib.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
On reg_mr_callback() mlx5_ib is recalculating the mkey variant which is
wrong and will lead to using a different key variant than the one
submitted to firmware on create mkey command invocation.
To fix this, we store the mkey variant before invoking the firmware
command and use it later on completion (reg_mr_callback).
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Peer to peer support was never implemented, so delete it to make code less
clutter.
Link: https://lore.kernel.org/r/20200310091438.248429-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Convert mlx4 to use in-kernel offsetofend() instead
of its duplicated implementation.
Link: https://lore.kernel.org/r/20200310091438.248429-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Until now the flex parser capability was used in ib_query_device() to
indicate tunnel_offloads_caps support for mpls_over_gre/mpls_over_udp.
Newer devices and firmware will have configurations with the flexparser
but without mpls support.
Testing for the flex parser capability was a mistake, the tunnel_stateless
capability was intended for detecting mpls and was introduced at the same
time as the flex parser capability.
Otherwise userspace will be incorrectly informed that a future device
supports MPLS when it does not.
Link: https://lore.kernel.org/r/20200305123841.196086-1-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.17
Fixes: e818e255a5 ("IB/mlx5: Expose MPLS related tunneling offloads")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Those macros are already defined in include/linux/mlx5/driver.h, so delete
their duplicate variants.
Link: https://lore.kernel.org/r/20200310075706.238592-1-leon@kernel.org
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The header file rdma_core.h is duplicate, so let's remove it.
Fixes: 622db5b643 ("RDMA/core: Add trace points to follow MR allocation")
Link: https://lore.kernel.org/r/20200310091656.249696-1-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
'wqe' is already zeroed at the top of the 'while' loop, just a few lines
below, and is not used outside of the loop.
So there is no need to zero it again, or for the variable to be declared
outside the loop.
Link: https://lore.kernel.org/r/20200308065442.5415-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The tgid used to be part of ib_umem_free_notifier(), when it was reworked
it got moved to release, but it should have been unconditional as all umem
alloc paths get the tgid.
As is, creating an implicit ODP will leak the tgid reference.
Link: https://lore.kernel.org/r/20200304181607.GA22412@ziepe.ca
Cc: stable@kernel.org
Fixes: f25a546e65 ("RDMA/odp: Use mmu_interval_notifier_insert()")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since RDMA rw API support operations with P2P memory sg list, make sure to
map/unmap the scatter list for signature operation correctly.
Link: https://lore.kernel.org/r/20200220100819.41860-2-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5lkYceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGpHQH/RJrzcaZHo4lw88m
Jf7vBZ9DYUlRgqE0pxTHWmodNObKRqpwOUGflUcWbb/7GD2LQUfeqhSECVQyTID9
N9y7FcPvx321Qhc3EkZ24DBYk0+DQ0K2FVUrSa/PxO0n7czxxXWaLRDmlSULEd3R
D4pVs3zEWOBXJHUAvUQ5R+lKfkeWKNeeepeh+rezuhpdWFBRNz4Jjr5QUJ8od5xI
sIwobYmESJqTRVBHqW8g2T2/yIsFJ78GCXs8DZLe1wxh40UbxdYDTA0NDDTHKzK6
lxzBgcmKzuge+1OVmzxLouNWMnPcjFlVgXWVerpSy3/SIFFkzzUWeMbqm6hKuhOn
wAlcIgI=
=VQUc
-----END PGP SIGNATURE-----
Merge tag 'v5.6-rc5' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yishai Hadas Says:
====================
Expose raw packet pacing APIs to be used by DEVX based applications. The
existing code was refactored to have a single flow with the new raw APIs.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Due to dependencies
* branch 'mlx5_packet_pacing':
IB/mlx5: Introduce UAPIs to manage packet pacing
net/mlx5: Expose raw packet pacing APIs
Introduce packet pacing uobject and its alloc and destroy
methods.
This uobject holds mlx5 packet pacing context according to the device
specification and enables managing packet pacing device entries that are
needed by DEVX applications.
Link: https://lore.kernel.org/r/20200219190518.200912-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- Fix busted syzkaller fix in 'get_new_pps' - this turned out to crash on
certain HW configurations
- Bug fixes for various missed things in error unwinds
- Add a missing rcu_read_lock annotation in hfi/qib
- Fix two ODP related regressions from the recent mmu notifier changes
- Several more syzkaller bugs in siw, RDMA netlink, verbs and iwcm
- Revert an old patch in CMA as it is now shown to not be allocating port
numbers properly
-----BEGIN PGP SIGNATURE-----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=SFSu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Nothing particularly exciting, some small ODP regressions from the mmu
notifier rework, another bunch of syzkaller fixes, and a bug fix for a
botched syzkaller fix in the first rc pull request.
- Fix busted syzkaller fix in 'get_new_pps' - this turned out to
crash on certain HW configurations
- Bug fixes for various missed things in error unwinds
- Add a missing rcu_read_lock annotation in hfi/qib
- Fix two ODP related regressions from the recent mmu notifier
changes
- Several more syzkaller bugs in siw, RDMA netlink, verbs and iwcm
- Revert an old patch in CMA as it is now shown to not be allocating
port numbers properly"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/iwcm: Fix iwcm work deallocation
RDMA/siw: Fix failure handling during device creation
RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missing
RDMA/odp: Ensure the mm is still alive before creating an implicit child
RDMA/core: Fix protection fault in ib_mr_pool_destroy
IB/mlx5: Fix implicit ODP race
IB/hfi1, qib: Ensure RCU is locked when accessing list
RDMA/core: Fix pkey and port assignment in get_new_pps
RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()
RDMA/rw: Fix error flow during RDMA context initialization
RDMA/core: Fix use of logical OR in get_new_pps
Revert "RDMA/cma: Simplify rdma_resolve_addr() error flow"
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dealloc_work_entries() function must update the work_free_list pointer
while freeing its entries, since potentially called again on same list. A
second iteration of the work list caused system crash. This happens, if
work allocation fails during cma_iw_listen() and free_cm_id() tries to
free the list again during cleanup.
Fixes: 922a8e9fb2 ("RDMA: iWARP Connection Manager.")
Link: https://lore.kernel.org/r/20200302181614.17042-1-bmt@zurich.ibm.com
Reported-by: syzbot+cb0c054eabfba4342146@syzkaller.appspotmail.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A failing call to ib_device_set_netdev() during device creation caused
system crash due to xa_destroy of uninitialized xarray hit by device
deallocation. Fixed by moving xarray initialization before potential
device deallocation.
Fixes: bdcf26bf9b ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20200302155814.9896-1-bmt@zurich.ibm.com
Reported-by: syzbot+2e80962bedd9559fe0b3@syzkaller.appspotmail.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Holding the rtnl_lock while iterating a devices interface address list
potentially causes deadlocks with the cma_netdev_callback. While this was
implemented to limit the scope of a wildcard listen to addresses of the
current device only, a better solution limits the scope of the socket to
the device. This completely avoiding locking, and also results in
significant code simplification.
Fixes: c421651fa2 ("RDMA/siw: Add missing rtnl_lock around access to ifa")
Link: https://lore.kernel.org/r/20200228173534.26815-1-bmt@zurich.ibm.com
Reported-by: syzbot+55de90ab5f44172b0c90@syzkaller.appspotmail.com
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Cited commit missed to include low level congestion control related
debugfs stage initialization. This resulted in missing debugfs entries
for cc_params of a RDMA device.
Add them back.
Fixes: b5ca15ad7e ("IB/mlx5: Add proper representors support")
Link: https://lore.kernel.org/r/20200227125407.99803-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add two debugfs parameters described below.
np_min_time_between_cnps - Minimum time between sending CNPs from the
port.
Unit = microseconds.
Default = 0 (no min wait time; generated
based on incoming ECN marked packets).
rp_max_rate - Maximum rate at which reaction point node can transmit.
Once this limit is reached, RP is no longer rate limited.
Unit = Mbits/sec
Default = 0 (full speed)
Link: https://lore.kernel.org/r/20200227125246.99472-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Registration of a mmu_notifier requires the caller to hold a mmget() on
the mm as registration is not permitted to race with exit_mmap(). There is
a BUG_ON inside the mmu_notifier to guard against this.
Normally creating a umem is done against current which implicitly holds
the mmget(), however an implicit ODP child is created from a pagefault
work queue and is not guaranteed to have a mmget().
Call mmget() around this registration and abort faulting if the MM has
gone to exit_mmap().
Before the patch below the notifier was registered when the implicit ODP
parent was created, so there was no chance to register a notifier outside
of current.
Fixes: c571feca2d ("RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'")
Link: https://lore.kernel.org/r/20200227114118.94736-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following race may occur because of the call_srcu and the placement of
the synchronize_srcu vs the xa_erase.
CPU0 CPU1
mlx5_ib_free_implicit_mr: destroy_unused_implicit_child_mr:
xa_erase(odp_mkeys)
synchronize_srcu()
xa_lock(implicit_children)
if (still in xarray)
atomic_inc()
call_srcu()
xa_unlock(implicit_children)
xa_erase(implicit_children):
xa_lock(implicit_children)
__xa_erase()
xa_unlock(implicit_children)
flush_workqueue()
[..]
free_implicit_child_mr_rcu:
(via call_srcu)
queue_work()
WARN_ON(atomic_read())
[..]
free_implicit_child_mr_work:
(via wq)
free_implicit_child_mr()
mlx5_mr_cache_invalidate()
mlx5_ib_update_xlt() <-- UMR QP fail
atomic_dec()
The wait_event() solves the race because it blocks until
free_implicit_child_mr_work() completes.
Fixes: 5256edcb98 ("RDMA/mlx5: Rework implicit ODP destroy")
Link: https://lore.kernel.org/r/20200227113918.94432-1-leon@kernel.org
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Commit f164be8c03 ("IB/mlx5: Extend caps stage to handle VAR
capabilities") introduced a straight "/" division of the u64 variable
"bar_size".
This was fixed with commit 685eff5131 ("IB/mlx5: Use div64_u64 for
num_var_hw_entries calculation"). However, div64_u64() is redundant here
as mlx5_var_table::stride_size is of type u32. Make the actual code way
more optimized on 32-bit kernels using div_u64() and fix 80 chars
break-through by the way.
Fixes: 685eff5131 ("IB/mlx5: Use div64_u64 for num_var_hw_entries calculation")
Link: https://lore.kernel.org/r/20200217073629.8051-1-alobakin@dlink.ru
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5cOX8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGw0AH/0nex1uEpzUTm+Gw
D8QPFr3y61sYLu7sIMVt39+Zl6OSxvOOX14QIM/mrNrzjjRI8EXGvYgES5gSO4on
6NLS6/64c1oQThDHCsxusKoSWLZ9KqP2vRPt7tZjn7DZMzEsuLhlINKBeupcqALX
FnOBr768P+if/j0WcDR2pBaMg3ch+XC5sfYav7kapjgWUqCx9BvrHKLXXdlEGUC0
7Ku7PH+nF7CIHiTay+i89odvOd8aLGsa/SUf5XGauKkH65VgQkmksgPeZUPqTnyC
MEsyLJLfn4AP3ySwqzfSLac8jqZG8FGBt4DgM2MQBHibctzfeMIznfcfh/A8+Edx
jqLKLAs=
=4075
-----END PGP SIGNATURE-----
Merge tag 'v5.6-rc4' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The proper return code is "-EOPNOTSUPP" when the requested QP type is
not supported by the provider.
Link: https://lore.kernel.org/r/20200130082049.463-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Relaxed ordering is not supported in UMR so we are disabling UMR usage
when user passes relaxed ordering access flag.
Enable using UMR when user requested relaxed ordering but there are no
relaxed ordering capabilities.
This will prevent user from unnecessarily registering a new mkey.
Fixes: d6de0bb185 ("RDMA/mlx5: Set relaxed ordering when requested")
Link: https://lore.kernel.org/r/20200227113834.94233-1-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c: In function '__send_message':
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:101:10: warning:
variable 'idx' set but not used [-Wunused-but-set-variable]
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:101:6: warning:
variable 'pg' set but not used [-Wunused-but-set-variable]
commit cee0c7bba4 ("RDMA/bnxt_re: Refactor command queue management
code") involved this, but not used.
Link: https://lore.kernel.org/r/20200227064900.92255-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_create_gsi_qp':
drivers/infiniband/hw/bnxt_re/ib_verbs.c:1283:30: warning:
variable 'dev_attr' set but not used [-Wunused-but-set-variable]
commit 8dae419f9e ("RDMA/bnxt_re: Refactor queue pair creation code")
involved this, but not used, so remove it.
Link: https://lore.kernel.org/r/20200227064542.91205-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/bnxt_re/qplib_res.c: In function '__alloc_pbl':
drivers/infiniband/hw/bnxt_re/qplib_res.c:109:13: warning:
variable 'pg_size' set but not used [-Wunused-but-set-variable]
commit 0c4dcd6028 ("RDMA/bnxt_re: Refactor hardware queue memory
allocation") involved this, but not used, so remove it.
Link: https://lore.kernel.org/r/20200227064209.87893-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Using the new unregister APIs provided by the core. Provide the
dealloc_driver hook for the core to callback at the time of device
un-registration.
bnxt_re VF resources are created by the corresponding PF driver. During
ib_unregister_driver, PF might get removed before VF and this could cause
failure when VFs are removed. Driver is explicitly queuing the removal of
VF devices before calling ib_unregister_driver.
Link: https://lore.kernel.org/r/1582731932-26574-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- bnxt_re_ib_reg() handles two main functionalities - initializing the
device and registering with the IB stack. Split it into 2 functions
i.e. bnxt_re_dev_init() and bnxt_re_ib_init() to account for the same
thereby improve modularity. Do the same for
bnxt_re_ib_unreg()i.e. split into two functions - bnxt_re_dev_uninit()
and bnxt_re_ib_uninit().
- Simplify the code by combining the different steps to add and remove
the device into two functions.
- Report correct netdev link state during device register
Link: https://lore.kernel.org/r/1582731932-26574-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The packet handling function, specifically the iteration of the qp list
for mad packet processing misses locking RCU before running through the
list. Not only is this incorrect, but the list_for_each_entry_rcu() call
can not be called with a conditional check for lock dependency. Remedy
this by invoking the rcu lock and unlock around the critical section.
This brings MAD packet processing in line with what is done for non-MAD
packets.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20200225195445.140896.41873.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When destroying a DMA mmapped object, there is no need to artificially
delay the freeing of the pages to the mmap entry removal. Since the vma
keeps a reference count on these pages, free_pages_exact can be called on
the destroy verb as it won't really free the pages until the reference
count is cleared (in case the user hasn't called munmap yet).
Remove the special handling of DMA pages and call free_pages_exact on
destroy_qp/cq. The mmap entry removal is moved to the beginning of the
destroy flows, so the driver can safely free the pages.
Link: https://lore.kernel.org/r/20200225114010.21790-4-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The fact that the LSB in the register is the enable bit should not be an
implicit assumption between the driver and the device, properly document
that in the register definition.
Link: https://lore.kernel.org/r/20200225114010.21790-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use unified macros for device structs access instead of open coding the
shifts and masks over and over again.
Link: https://lore.kernel.org/r/20200225114010.21790-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Encapsulate the kernel qp doorbell allocation related code into 2
functions: alloc_qp_db() and free_qp_db().
Link: https://lore.kernel.org/r/1582526258-13825-8-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Encapsulate the kernel qp wrid allocation related code into 2 functions:
alloc_kernel_wrid() and free_kernel_wrid().
Link: https://lore.kernel.org/r/1582526258-13825-7-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Encapsulate qp buffer allocation related code into 3 functions:
alloc_qp_buf(), map_wqe_buf() and free_qp_buf().
Link: https://lore.kernel.org/r/1582526258-13825-5-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Encapsulate the code associated with the qp number assignment into
alloc_qpn() and free_qpn().
Link: https://lore.kernel.org/r/1582526258-13825-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Rename the qp context related functions and adjusts the code location to
distinguish between the qp context and the entire qp.
Link: https://lore.kernel.org/r/1582526258-13825-3-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Wrap the duplicate code in hip08 and hip06 qp destruction process as
hns_roce_qp_destroy() to simply the qp destroy flow.
Link: https://lore.kernel.org/r/1582526258-13825-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are two paths to update qp producer index into hardware now, one
path is doorbell in post verbs (send and recv), the another is mailbox in
modify qp verb which is called by flush process. This will lead the
hardware to be broken to correctly generate flush cqe. With stopping
doorbell update and holding qp spinlock in modify qp during flush process,
the problem can be solved.
Fixes: 0425e3e6e0 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Link: https://lore.kernel.org/r/1582367158-27030-3-git-send-email-liuyixian@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set revisions that equal to or higher than HIP08_B as default to maintain
backward compatibility.
Link: https://lore.kernel.org/r/1582363039-10714-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The algorithm pre-allocates a cm_id since allocation cannot be done while
holding the cm.lock spinlock, however it doesn't free it on one error
path, leading to a memory leak.
Fixes: 067b171b86 ("IB/cm: Share listening CM IDs")
Link: https://lore.kernel.org/r/20200221152023.GA8680@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The default version provided by "ethtool -i" it the correct way
to identify Driver version. There is no need to overwrite it.
Link: https://lore.kernel.org/r/20200220071239.231800-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to set driver version in in-tree kernel code.
Link: https://lore.kernel.org/r/20200220071239.231800-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Make sure to set the active_{speed, width} attributes to avoid reporting
the same values regardless of the underlying device.
Fixes: 303ae1cdfd ("rdma/siw: application interface")
Link: https://lore.kernel.org/r/20200218095911.26614-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Tested-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl5S7WYACgkQwjcgfpV0
+n1jmQgAmwV3V8pbgB4mi4P2Mv8w5Zj5feUe6uXnTR2AFv5nygLcTzdxN+TU/6lc
OmZv2zzdsAscYlhuUdI/4t4cXIjHAZI39+UBoNRuMqKbkbvXCFscZANLxvJjHjZv
FFbgUk0DXkF0BCEDuSLNavidAv4b3gZsOmHbPfwuB8xdP05LbvbS2mf+2tWVAi2z
ULfua/0o9yiwl19jSS6iQEPCvvLBeBzTLW7x5Rcm/S0JnotzB59yMaeqD7jO8JYP
5PvI4WM/l5UfVHnZp2k1R76AOjReALw8dQgqAsT79Q7+EH3sNNuIjU6omdy+DFf4
tnpwYfeLOaZ1SztNNfU87Hsgnn2CGw==
=pDE3
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
Pull EFI updates for v5.7 from Ard Biesheuvel:
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Replace the EFI runtime services check with one that tells us whether
EFI GetVariable() is implemented by the firmware.
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Four non-core fixes. Two are reverts of target fixes which turned out
to have unwanted side effects, one is a revert of an RDMA fix with the
same problem and the final one fixes an incorrect warning about memory
allocation failures in megaraid_sas (the driver actually reduces the
allocation size until it succeeds).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXlBhuyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdMGAQCR8Qi2
m2kPgccUvJwVmnJ+DRJ3MRRX3Kn0IJIDoIc0IgEA6/W33+7xY8qQ0uahOyOT90tz
g7Y2I7TxQ+dsL9pqs80=
=JIpx
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four non-core fixes.
Two are reverts of target fixes which turned out to have unwanted side
effects, one is a revert of an RDMA fix with the same problem and the
final one fixes an incorrect warning about memory allocation failures
in megaraid_sas (the driver actually reduces the allocation size until
it succeeds)"
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: Revert "target: iscsi: Wait for all commands to finish before freeing a session"
scsi: Revert "RDMA/isert: Fix a recently introduced regression related to logout"
scsi: megaraid_sas: silence a warning
scsi: Revert "target/core: Inline transport_lun_remove_cmd()"
Replacing the dev_err/dbg/warn with ibdev_err/dbg/warn. In the IB device
provider driver these functions are recommended to use.
Currently qplib layer function calls has not been replaced due to
unavailability of ib_device pointer at that layer.
Link: https://lore.kernel.org/r/1581786665-23705-9-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Moving all the fast path doorbell functions at one place under
qplib_res.h. To pass doorbell record information a new structure
bnxt_qplib_db_info has been introduced. Every roce object holds an
instance of this structure and doorbell information is initialized during
resource creation.
When DB is rung only the current queue index is read from hardware ring
and rest of the data is taken from pre-initialized dbinfo structure.
Link: https://lore.kernel.org/r/1581786665-23705-8-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Cleaning up the notification queue data structures and management
code. The CQ and SRQ event handlers have been type defined instead of
in-place declaration. NQ doorbell register descriptor has been added in
base NQ structure. The nq->vector has been renamed to nq->msix_vec.
Link: https://lore.kernel.org/r/1581786665-23705-7-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Refactoring the command queue (rcfw) management code. A new data-structure
is introduced to describe the bar register. each object which deals with
mmio space should have a descriptor structure. This structure specifically
hold DB register information. Thus, slow path creq structure now hold a
bar register descriptor.
Further cleanup the rcfw structure to introduce the command queue context
and command response event queue context structures. Rest of the rcfw
related code has been touched to incorporate these three structures.
Link: https://lore.kernel.org/r/1581786665-23705-6-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introducing a new attribute structure to reduce the long list of arguments
passed in bnxt_re_net_ring_alloc() function.
The caller of bnxt_re_net_ring_alloc should fill in the list of attributes
in bnxt_re_ring_attr structure and then pass the pointer to the function.
Link: https://lore.kernel.org/r/1581786665-23705-5-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
At top level there are three major data structure addition. viz
bnxt_qplib_hwq_attr, bnxt_qplib_sg_info and bnxt_qplib_tqm_ctx
Intorduction of first data structure reduces the arguments list to
bnxt_re_alloc_init_hwq() function. There are changes all over the driver
code to incorporate this new structure. The caller needs to fill the
attribute data structure and pass to this function.
The second data structure is to pass memory region description
viz. sghead, page_size and page_shift. There are changes all over the
driver code to initialize bnxt_re_sg_info data structure. The new data
structure helps to reduce the argument list of __alloc_pbl() function
call.
Till now the TQM rings related members were not collected under any
specific data-structure making it hard to manage. The third data
sctructure bnxt_qplib_tqm_ctx is added to refactor the TQM queue
allocation and initialization.
Link: https://lore.kernel.org/r/1581786665-23705-4-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The chip_ctx member in bnxt_re_dev structure is now a pointer to struct
bnxt_qplib_chip_ctx. Since the member type has changed there are changes
in rest of the code wherever dev->chip_ctx is used.
Link: https://lore.kernel.org/r/1581786665-23705-3-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Restructuring the bnxt_re_create_qp function. Listing below the major
changes:
- Monolithic central part of create_qp where attributes are initialized
is now enclosed in one function and this new function has few more
sub-functions.
- Top level qp limit checking code moved to a function.
- GSI QP creation and GSI Shadow qp creation code is handled in a sub
function.
Link: https://lore.kernel.org/r/1581786665-23705-2-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lore.kernel.org/r/20200213010425.GA13068@embeddedor.com
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> # added a few more
In case the SGL was mapped for P2P DMA operation, we must unmap it using
pci_p2pdma_unmap_sg during the error unwind of rdma_rw_ctx_init()
Fixes: 7f73eac3a7 ("PCI/P2PDMA: Introduce pci_p2pdma_unmap_sg()")
Link: https://lore.kernel.org/r/20200220100819.41860-1-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Multi chain support requires the miss path to continue the processing
from the last chain id, and for that we need to save the chain
miss tag (a mapping for 32bit chain id) on reg_c0 which will
come in a next patch.
Currently reg_c0 is exclusively used to store the source port
metadata, giving it 32bit, it is created from 16bits of vcha_id,
and 16bits of vport number.
We will move this source port metadata to upper 16bits, and leave the
lower bits for the chain miss tag. We compress the reg_c0 source port
metadata to 16bits by taking 8 bits from vhca_id, and 8bits from
the vport number.
Since we compress the vport number to 8bits statically, and leave two
top ids for special PF/ECPF numbers, we will only support a max of 254
vports with this strategy.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
From the comment above the definition of the roundup_pow_of_two() macro:
The result is undefined when n == 0.
Hence only pass positive values to roundup_pow_of_two(). This patch fixes
the following UBSAN complaint:
UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
Call Trace:
dump_stack+0xa5/0xe6
ubsan_epilogue+0x9/0x26
__ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9
rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe]
rxe_modify_qp+0x59/0x70 [rdma_rxe]
_ib_modify_qp+0x5aa/0x7c0 [ib_core]
ib_modify_qp+0x3b/0x50 [ib_core]
cma_modify_qp_rtr+0x234/0x260 [rdma_cm]
__rdma_accept+0x1a7/0x650 [rdma_cm]
nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma]
cma_cm_event_handler+0x6b/0x330 [rdma_cm]
cma_ib_req_handler+0xe60/0x22d0 [rdma_cm]
cm_process_work+0x30/0x140 [ib_cm]
cm_req_handler+0x11f4/0x1cd0 [ib_cm]
cm_work_handler+0xb8/0x344e [ib_cm]
process_one_work+0x569/0xb60
worker_thread+0x7a/0x5d0
kthread+0x1e6/0x210
ret_from_fork+0x24/0x30
Link: https://lore.kernel.org/r/20200217205714.26937-1-bvanassche@acm.org
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
bnxt_re HW maintains a GID table with only a single entry for the two
duplicate GID entries (v1 and v2). Driver needs to map stack gid index to
the HW table gid index. Use the new API rdma_read_gid_hw_context () to
retrieve the HW GID context to get the HW table index.
Link: https://lore.kernel.org/r/1582107594-5180-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Clang warns:
../drivers/infiniband/core/security.c:351:41: warning: converting the
enum constant to a boolean [-Wint-in-bool-context]
if (!(qp_attr_mask & (IB_QP_PKEY_INDEX || IB_QP_PORT)) && qp_pps) {
^
1 warning generated.
A bitwise OR should have been used instead.
Fixes: 1dd017882e ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list")
Link: https://lore.kernel.org/r/20200217204318.13609-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/889
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This reverts commit 219d2e9dfd.
The call chain below requires the cm_id_priv's destination address to be
setup before performing rdma_bind_addr(). Otherwise source port allocation
fails as cma_port_is_unique() no longer sees the correct tuple to allow
duplicate users of the source port.
rdma_resolve_addr()
cma_bind_addr()
rdma_bind_addr()
cma_get_port()
cma_alloc_any_port()
cma_port_is_unique() <- compared with zero daddr
This can result in false failures to connect, particularly if the source
port range is restricted.
Fixes: 219d2e9dfd ("RDMA/cma: Simplify rdma_resolve_addr() error flow")
Link: https://lore.kernel.org/r/20200212072635.682689-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This function accepts a udata but does nothing with it, and is never
passed a !NULL udata. Rename it to ib_create_qp which was the only caller
and remove the udata.
Link: https://lore.kernel.org/r/20200213191911.GA9898@ziepe.ca
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HiP08 RoCE hardware lacks ability(a known hardware problem) to flush
outstanding WQEs if QP state gets into errored mode for some reason. To
overcome this hardware problem and as a workaround, when QP is detected to
be in errored state during various legs like post send, post receive
etc[1], flush needs to be performed from the driver.
The earlier patch[1] sent to solve the hardware limitation explained in
the cover-letter had a bug in the software flushing leg. It acquired mutex
while modifying QP state to errored state and while conveying it to the
hardware using the mailbox. This caused leg to sleep while holding
spin-lock and caused crash.
Suggested Solution: we have proposed to defer the flushing of the QP in
the Errored state using the workqueue to get around with the limitation of
our hardware.
This patch specifically adds the calls to the flush handler from where
parts of the code like post_send/post_recv etc. when the QP state gets
into the errored mode.
[1] https://patchwork.kernel.org/patch/10534271/
Link: https://lore.kernel.org/r/1580983005-13899-3-git-send-email-liuyixian@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HiP08 RoCE hardware lacks ability(a known hardware problem) to flush
outstanding WQEs if QP state gets into errored mode for some reason. To
overcome this hardware problem and as a workaround, when QP is detected to
be in errored state during various legs like post send, post receive etc
[1], flush needs to be performed from the driver.
The earlier patch[1] sent to solve the hardware limitation explained in
the cover-letter had a bug in the software flushing leg. It acquired mutex
while modifying QP state to errored state and while conveying it to the
hardware using the mailbox. This caused leg to sleep while holding
spin-lock and caused crash.
Suggested Solution:
we have proposed to defer the flushing of the QP in the Errored state
using the workqueue to get around with the limitation of our hardware.
This patch adds the framework of the workqueue and the flush handler
function.
[1] https://patchwork.kernel.org/patch/10534271/
Link: https://lore.kernel.org/r/1580983005-13899-2-git-send-email-liuyixian@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For memory regions registered with IB_ACCESS_RELAXED_ORDERING will be dma
mapped with the DMA_ATTR_WEAK_ORDERING.
This will allow reads and writes to the mapping to be weakly ordered, such
change can enhance performance on some supporting architectures.
Link: https://lore.kernel.org/r/20200212073559.684139-1-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IBTA declares QPN as 24bits, mask input to ensure that kernel
doesn't get higher bits and ensure by adding WANR_ONCE() that
other CM users do the same.
Link: https://lore.kernel.org/r/20200212072635.682689-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When run stress tests with RXE, the following Call Traces often occur
watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [swapper/2:0]
...
Call Trace:
<IRQ>
create_object+0x3f/0x3b0
kmem_cache_alloc_node_trace+0x129/0x2d0
__kmalloc_reserve.isra.52+0x2e/0x80
__alloc_skb+0x83/0x270
rxe_init_packet+0x99/0x150 [rdma_rxe]
rxe_requester+0x34e/0x11a0 [rdma_rxe]
rxe_do_task+0x85/0xf0 [rdma_rxe]
tasklet_action_common.isra.21+0xeb/0x100
__do_softirq+0xd0/0x298
irq_exit+0xc5/0xd0
smp_apic_timer_interrupt+0x68/0x120
apic_timer_interrupt+0xf/0x20
</IRQ>
...
The root cause is that tasklet is actually a softirq. In a tasklet
handler, another softirq handler is triggered. Usually these softirq
handlers run on the same cpu core. So this will cause "soft lockup Bug".
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200212072635.682689-8-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The cmd and index variables declared as u16 and the result is supposed to
be stored in u64. The C arithmetic rules doesn't promote "(index >> 8) <<
16" to be u64 and leaves the end result to be u16.
Fixes: 7be76bef32 ("IB/mlx5: Introduce VAR object and its alloc/destroy methods")
Link: https://lore.kernel.org/r/20200212072635.682689-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When disassociating a device from umad we must ensure that the sysfs
access is prevented before blocking the fops, otherwise assumptions in
syfs don't hold:
CPU0 CPU1
ib_umad_kill_port() ibdev_show()
port->ib_dev = NULL
dev_name(port->ib_dev)
The prior patch made an error in moving the device_destroy(), it should
have been split into device_del() (above) and put_device() (below). At
this point we already have the split, so move the device_del() back to its
original place.
kernel stack
PF: error_code(0x0000) - not-present page
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
RIP: 0010:ibdev_show+0x18/0x50 [ib_umad]
RSP: 0018:ffffc9000097fe40 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffffa0441120 RCX: ffff8881df514000
RDX: ffff8881df514000 RSI: ffffffffa0441120 RDI: ffff8881df1e8870
RBP: ffffffff81caf000 R08: ffff8881df1e8870 R09: 0000000000000000
R10: 0000000000001000 R11: 0000000000000003 R12: ffff88822f550b40
R13: 0000000000000001 R14: ffffc9000097ff08 R15: ffff8882238bad58
FS: 00007f1437ff3740(0000) GS:ffff888236940000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000004e8 CR3: 00000001e0dfc001 CR4: 00000000001606e0
Call Trace:
dev_attr_show+0x15/0x50
sysfs_kf_seq_show+0xb8/0x1a0
seq_read+0x12d/0x350
vfs_read+0x89/0x140
ksys_read+0x55/0xd0
do_syscall_64+0x55/0x1b0
entry_SYSCALL_64_after_hwframe+0x44/0xa9:
Fixes: cf7ad30302 ("IB/umad: Avoid destroying device while it is accessed")
Link: https://lore.kernel.org/r/20200212072635.682689-9-leon@kernel.org
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As in the prior patch, the devx code is not fully cleaning up its
event_lists before finishing driver_destroy allowing a later read to
trigger user after free conditions.
Re-arrange things so that the event_list is always empty after destroy and
ensure it remains empty until the file is closed.
Fixes: f7c8416cce ("RDMA/core: Simplify destruction of FD uobjects")
Link: https://lore.kernel.org/r/20200212072635.682689-7-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the uobject file scheme was revised to allow device disassociation
from the file it became possible for read() to still happen the driver
destroys the uobject.
The old clode code was not tolerant to concurrent read, and when it was
moved to the driver destroy it creates a bug.
Ensure the event_list is empty after driver destroy by adding the missing
list_del(). Otherwise read() can trigger a use after free and double
kfree.
Fixes: f7c8416cce ("RDMA/core: Simplify destruction of FD uobjects")
Link: https://lore.kernel.org/r/20200212072635.682689-6-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Make sure to set the active_mtu attribute to avoid report the following
invalid value:
$ ibv_devinfo -d siw0 | grep active_mtu
active_mtu: invalid MTU (0)
Fixes: 303ae1cdfd ("rdma/siw: application interface")
Link: https://lore.kernel.org/r/20200205081354.30438-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The in_dev_for_each_ifa_rtnl() iterator in i40iw_add_ipv4_addr requires
that the rtnl lock be held. But the rtnl_trylock/unlock scheme in this
function does not guarantee it.
Replace the rtnl locking with an RCU lookup using
in_dev_for_each_ifa_rcu()
Fixes: 8e06af711b ("i40iw: add main, hdr, status")
Link: https://lore.kernel.org/r/20200204223840.2151-1-shiraz.saleem@intel.com
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As per draft-hilland-iwarp-verbs-v1.0, sec 6.2.3, always initiate a CLOSE
when entering into TERM state.
In c4iw_modify_qp(), disconnect operation should only be performed when
the modify_qp call is invoked from ib_core. And all other internal
modify_qp calls(invoked within iw_cxgb4) that needs 'disconnect' should
call c4iw_ep_disconnect() explicitly after modify_qp. Otherwise, deadlocks
like below can occur:
Call Trace:
schedule+0x2f/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.5+0x2d0/0x4a0
c4iw_ep_disconnect+0x39/0x430 => tries to reacquire ep lock again
c4iw_modify_qp+0x468/0x10d0
rx_data+0x218/0x570 => acquires ep lock
process_work+0x5f/0x70
process_one_work+0x1a7/0x3b0
worker_thread+0x30/0x390
kthread+0x112/0x130
ret_from_fork+0x35/0x40
Fixes: d2c33370ae ("RDMA/iw_cxgb4: Always disconnect when QP is transitioning to TERMINATE state")
Link: https://lore.kernel.org/r/20200204091230.7210-1-krishna2@chelsio.com
Signed-off-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When binding a QP with a counter and the QP state is not RESET, return
failure if the rts2rts_qp_counters_set_id is not supported by the
device.
This is to prevent cases like manual bind for Connect-IB devices from
returning success when the feature is not supported.
Fixes: d14133dd41 ("IB/mlx5: Support set qp counter")
Link: https://lore.kernel.org/r/20200126171708.5167-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The eqe has a private multi-hop addressing implementation, but there is
already a set of interfaces in the hns driver that can achieve this.
So, simplify the eqe buffer allocation process by using the mtr interface
and remove large amount of repeated logic.
Link: https://lore.kernel.org/r/20200126145835.11368-1-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Some magic numbers are hard to understand, so replace them with macros or
add some comments for them.
Link: https://lore.kernel.org/r/20200126145504.9700-1-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use a refcount_t for atomics being used as a refcount.
Link: https://lore.kernel.org/r/20200126142652.104803-8-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Helper functions which increment/decrement reference count of a
structure read better when they are named with the get/put suffix.
Hence, rename cma_ref/deref_id() to cma_id_get/put(). Also use
cma_get_id() wrapper to find the balancing put() calls.
Link: https://lore.kernel.org/r/20200126142652.104803-7-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use the refcount variant to capture the reference counting of the cma
device structure.
Link: https://lore.kernel.org/r/20200126142652.104803-6-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Helper functions which increment/decrement reference count of the
structure read better when they are named with the get/put suffix.
Hence, rename cma_ref/deref_dev() to cma_dev_get/put().
Link: https://lore.kernel.org/r/20200126142652.104803-5-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use RDMA device port iterator to avoid open coding.
Link: https://lore.kernel.org/r/20200126142652.104803-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
To avoid errors, with attaching ownership of work item and its cm_id
refcount which is decremented in work handler, tie them up in single
helper function. Also avoid code duplication.
Link: https://lore.kernel.org/r/20200126142652.104803-3-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Each user context is allocated a certain number of RcvArray (TID)
entries and these entries are managed through TID groups. These groups
are put into one of three lists in each user context: tid_group_list,
tid_used_list, and tid_full_list, depending on the number of used TID
entries within each group. When TID packets are expected, one or more
TID groups will be allocated. After the packets are received, the TID
groups will be freed. Since multiple user threads may access the TID
groups simultaneously, a mutex exp_mutex is used to synchronize the
access. However, when the user file is closed, it tries to release
all TID groups without acquiring the mutex first, which risks a race
condition with another thread that may be releasing its TID groups,
leading to data corruption.
This patch addresses the issue by acquiring the mutex first before
releasing the TID groups when the file is closed.
Fixes: 3abb33ac65 ("staging/hfi1: Add TID cache receive init and free funcs")
Link: https://lore.kernel.org/r/20200210131026.87408.86853.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- Driver updates and cleanup for qedr, bnxt_re, hns, siw, mlx5, mlx4, rxe,
i40iw
- Larger series doing cleanup and rework for hns and hfi1.
- Some general reworking of the CM code to make it a little more
understandable
- Unify the different code paths connected to the uverbs FD scheme
- New UAPI ioctls conversions for get context and get async fd
- Trace points for CQ and CM portions of the RDMA stack
- mlx5 driver support for virtio-net formatted rings as RDMA raw ethernet QPs
- verbs support for setting the PCI-E relaxed ordering bit on DMA traffic
connected to a MR
- A couple of bug fixes that came too late to make rc7
-----BEGIN PGP SIGNATURE-----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=hepK
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A very quiet cycle with few notable changes. Mostly the usual list of
one or two patches to drivers changing something that isn't quite rc
worthy. The subsystem seems to be seeing a larger number of rework and
cleanup style patches right now, I feel that several vendors are
prepping their drivers for new silicon.
Summary:
- Driver updates and cleanup for qedr, bnxt_re, hns, siw, mlx5, mlx4,
rxe, i40iw
- Larger series doing cleanup and rework for hns and hfi1.
- Some general reworking of the CM code to make it a little more
understandable
- Unify the different code paths connected to the uverbs FD scheme
- New UAPI ioctls conversions for get context and get async fd
- Trace points for CQ and CM portions of the RDMA stack
- mlx5 driver support for virtio-net formatted rings as RDMA raw
ethernet QPs
- verbs support for setting the PCI-E relaxed ordering bit on DMA
traffic connected to a MR
- A couple of bug fixes that came too late to make rc7"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (108 commits)
RDMA/core: Make the entire API tree static
RDMA/efa: Mask access flags with the correct optional range
RDMA/cma: Fix unbalanced cm_id reference count during address resolve
RDMA/umem: Fix ib_umem_find_best_pgsz()
IB/mlx4: Fix leak in id_map_find_del
IB/opa_vnic: Spelling correction of 'erorr' to 'error'
IB/hfi1: Fix logical condition in msix_request_irq
RDMA/cm: Remove CM message structs
RDMA/cm: Use IBA functions for complex structure members
RDMA/cm: Use IBA functions for simple structure members
RDMA/cm: Use IBA functions for swapping get/set acessors
RDMA/cm: Use IBA functions for simple get/set acessors
RDMA/cm: Add SET/GET implementations to hide IBA wire format
RDMA/cm: Add accessors for CM_REQ transport_type
IB/mlx5: Return the administrative GUID if exists
RDMA/core: Ensure that rdma_user_mmap_entry_remove() is a fence
IB/mlx4: Fix memory leak in add_gid error flow
IB/mlx5: Expose RoCE accelerator counters
RDMA/mlx5: Set relaxed ordering when requested
RDMA/core: Add the core support field to METHOD_GET_CONTEXT
...
In order to provide a clearer, more symmetric API for pinning and
unpinning DMA pages. This way, pin_user_pages*() calls match up with
unpin_user_pages*() calls, and the API is a lot closer to being
self-explanatory.
Link: http://lkml.kernel.org/r/20200107224558.2362728-23-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert infiniband to use the new pin_user_pages*() calls.
Also, revert earlier changes to Infiniband ODP that had it using
put_user_page(). ODP is "Case 3" in
Documentation/core-api/pin_user_pages.rst, which is to say, normal
get_user_pages() and put_page() is the API to use there.
The new pin_user_pages*() calls replace corresponding get_user_pages*()
calls, and set the FOLL_PIN flag. The FOLL_PIN flag requires that the
caller must return the pages via put_user_page*() calls, but infiniband
was already doing that as part of an earlier commit.
Link: http://lkml.kernel.org/r/20200107224558.2362728-14-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
And get rid of the mmap_sem calls, as part of that. Note that
get_user_pages_fast() will, if necessary, fall back to
__gup_longterm_unlocked(), which takes the mmap_sem as needed.
Link: http://lkml.kernel.org/r/20200107224558.2362728-10-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Compilation of mlx5 driver without CONFIG_INFINIBAND_USER_ACCESS generates
the following error.
on x86_64:
ld: drivers/infiniband/hw/mlx5/main.o: in function `mlx5_ib_handler_MLX5_IB_METHOD_VAR_OBJ_ALLOC':
main.c:(.text+0x186d): undefined reference to `ib_uverbs_get_ucontext_file'
ld: drivers/infiniband/hw/mlx5/main.o:(.rodata+0x2480): undefined reference to `uverbs_idr_class'
ld: drivers/infiniband/hw/mlx5/main.o:(.rodata+0x24d8): undefined reference to `uverbs_destroy_def_handler'
This is happening because some parts of the UAPI description are not
static. This is a hold over from earlier code that relied on struct
pointers to refer to object types, now object types are referenced by
number. Remove the unused globals and add statics to the remaining UAPI
description elements.
Remove the redundent #ifdefs around mlx5_ib_*defs and obsolete
mlx5_ib_get_devx_tree().
The compiler now trims alot more unused code, including the above
problematic definitions when !CONFIG_INFINIBAND_USER_ACCESS.
Fixes: 7be76bef32 ("IB/mlx5: Introduce VAR object and its alloc/destroy methods")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The uapi value IB_UVERBS_ACCESS_OPTIONAL_RANGE shouldn't be used inside
the driver, use IB_ACCESS_OPTIONAL instead.
Fixes: 86dd738cf2 ("RDMA/efa: Allow passing of optional access flags for MR registration")
Link: https://lore.kernel.org/r/20200129071803.40117-1-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
Below commit missed the AF_IB and loopback code flow in
rdma_resolve_addr(). This leads to an unbalanced cm_id refcount in
cma_work_handler() which puts the refcount which was not incremented prior
to queuing the work.
A call trace is observed with such code flow:
BUG: unable to handle kernel NULL pointer dereference at (null)
[<ffffffff96b67e16>] __mutex_lock_slowpath+0x166/0x1d0
[<ffffffff96b6715f>] mutex_lock+0x1f/0x2f
[<ffffffffc0beabb5>] cma_work_handler+0x25/0xa0
[<ffffffff964b9ebf>] process_one_work+0x17f/0x440
[<ffffffff964baf56>] worker_thread+0x126/0x3c0
Hence, hold the cm_id reference when scheduling the resolve work item.
Fixes: 722c7b2bfe ("RDMA/{cma, core}: Avoid callback on rdma_addr_cancel()")
Link: https://lore.kernel.org/r/20200126142652.104803-2-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Except for the last entry, the ending iova alignment sets the maximum
possible page size as the low bits of the iova must be zero when starting
the next chunk.
Fixes: 4a35339958 ("RDMA/umem: Add API to find best driver supported page size in an MR")
Link: https://lore.kernel.org/r/20200128135612.174820-1-leon@kernel.org
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Ftrace is one of the last W^X violators (after this only KLP is
left). These patches move it over to the generic text_poke()
interface and thereby get rid of this oddity. This requires a
surprising amount of surgery, by Peter Zijlstra.
- x86/AMD PMUs: add support for 'Large Increment per Cycle Events' to
count certain types of events that have a special, quirky hw ABI
(by Kim Phillips)
- kprobes fixes by Masami Hiramatsu
Lots of tooling updates as well, the following subcommands were
updated: annotate/report/top, c2c, clang, record, report/top TUI,
sched timehist, tests; plus updates were done to the gtk ui, libperf,
headers and the parser"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
perf/x86/amd: Add support for Large Increment per Cycle Events
perf/x86/amd: Constrain Large Increment per Cycle events
perf/x86/intel/rapl: Add Comet Lake support
tracing: Initialize ret in syscall_enter_define_fields()
perf header: Use last modification time for timestamp
perf c2c: Fix return type for histogram sorting comparision functions
perf beauty sockaddr: Fix augmented syscall format warning
perf/ui/gtk: Fix gtk2 build
perf ui gtk: Add missing zalloc object
perf tools: Use %define api.pure full instead of %pure-parser
libperf: Setup initial evlist::all_cpus value
perf report: Fix no libunwind compiled warning break s390 issue
perf tools: Support --prefix/--prefix-strip
perf report: Clarify in help that --children is default
tools build: Fix test-clang.cpp with Clang 8+
perf clang: Fix build with Clang 9
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic
tools lib: Fix builds when glibc contains strlcpy()
perf report/top: Make 'e' visible in the help and make it toggle showing callchains
perf report/top: Do not offer annotation for symbols without samples
...
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- Cleanup of the GOP [graphics output] handling code in the EFI stub
- Complete refactoring of the mixed mode handling in the x86 EFI stub
- Overhaul of the x86 EFI boot/runtime code
- Increase robustness for mixed mode code
- Add the ability to disable DMA at the root port level in the EFI
stub
- Get rid of RWX mappings in the EFI memory map and page tables,
where possible
- Move the support code for the old EFI memory mapping style into its
only user, the SGI UV1+ support code.
- plus misc fixes, updates, smaller cleanups.
... and due to interactions with the RWX changes, another round of PAT
cleanups make a guest appearance via the EFI tree - with no side
effects intended"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
efi/x86: Disable instrumentation in the EFI runtime handling code
efi/libstub/x86: Fix EFI server boot failure
efi/x86: Disallow efi=old_map in mixed mode
x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld
efi/x86: avoid KASAN false positives when accessing the 1: 1 mapping
efi: Fix handling of multiple efi_fake_mem= entries
efi: Fix efi_memmap_alloc() leaks
efi: Add tracking for dynamically allocated memmaps
efi: Add a flags parameter to efi_memory_map
efi: Fix comment for efi_mem_type() wrt absent physical addresses
efi/arm: Defer probe of PCIe backed efifb on DT systems
efi/x86: Limit EFI old memory map to SGI UV machines
efi/x86: Avoid RWX mappings for all of DRAM
efi/x86: Don't map the entire kernel text RW for mixed mode
x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd
efi/libstub/x86: Fix unused-variable warning
efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode
efi/libstub/x86: Use const attribute for efi_is_64bit()
efi: Allow disabling PCI busmastering on bridges during boot
efi/x86: Allow translating 64-bit arguments for mixed mode calls
...
- remove ioremap_nocache given that is is equivalent to
ioremap everywhere
-----BEGIN PGP SIGNATURE-----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=TUCJ
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap
Pull ioremap updates from Christoph Hellwig:
"Remove the ioremap_nocache API (plus wrappers) that are always
identical to ioremap"
* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
remove ioremap_nocache and devm_ioremap_nocache
MIPS: define ioremap_nocache to ioremap
Using CX-3 virtual functions, either from a bare-metal machine or
pass-through from a VM, MAD packets are proxied through the PF driver.
Since the VF drivers have separate name spaces for MAD Transaction Ids
(TIDs), the PF driver has to re-map the TIDs and keep the book keeping in
a cache.
Following the RDMA Connection Manager (CM) protocol, it is clear when an
entry has to evicted from the cache. When a DREP is sent from
mlx4_ib_multiplex_cm_handler(), id_map_find_del() is called. Similar when
a REJ is received by the mlx4_ib_demux_cm_handler(), id_map_find_del() is
called.
This function wipes out the TID in use from the IDR or XArray and removes
the id_map_entry from the table.
In short, it does everything except the topping of the cake, which is to
remove the entry from the list and free it. In other words, for the REJ
case enumerated above, one id_map_entry will be leaked.
For the other case above, a DREQ has been received first. The reception of
the DREQ will trigger queuing of a delayed work to delete the
id_map_entry, for the case where the VM doesn't send back a DREP.
In the normal case, the VM _will_ send back a DREP, and id_map_find_del()
will be called.
But this scenario introduces a secondary leak. First, when the DREQ is
received, a delayed work is queued. The VM will then return a DREP, which
will call id_map_find_del(). As stated above, this will free the TID used
from the XArray or IDR. Now, there is window where that particular TID can
be re-allocated, lets say by an outgoing REQ. This TID will later be wiped
out by the delayed work, when the function id_map_ent_timeout() is
called. But the id_map_entry allocated by the outgoing REQ will not be
de-allocated, and we have a leak.
Both leaks are fixed by removing the id_map_find_del() function and only
using schedule_delayed(). Of course, a check in schedule_delayed() to see
if the work already has been queued, has been added.
Another benefit of always using the delayed version for deleting entries,
is that we do get a TimeWait effect; a TID no longer in use, will occupy
the XArray or IDR for CM_CLEANUP_CACHE_TIMEOUT time, without any ability
of being re-used for that time period.
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200123155521.1212288-1-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com>
Reviewed-by: Rama Nichanamatlu <rama.nichanamatlu@oracle.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Two last minute fixes, both in drivers. The fnic one is a highly
unlikely condition, but the RDMA one is a recently introduced
regression that causes a kernel warning to trigger in every RDMA
logon, which would be unsightly if it got into the final release.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJsEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXi3VRyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbrpAP9I/pEp
TWu/QkqFFrmuYbzuxtRML7X2T7+B96J/CRtQvQD3TAIW0gvw49Uj25yEwTRnVzCs
1A+eELAahzBPW+rRBw==
=C3yx
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two last minute fixes, both in drivers.
The fnic one is a highly unlikely condition, but the RDMA one is a
recently introduced regression that causes a kernel warning to trigger
in every RDMA logon, which would be unsightly if it got into the final
release"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: RDMA/isert: Fix a recently introduced regression related to logout
scsi: fnic: do not queue commands during fwreset
Correcting a minor spelling mistake in the comments.
Link: https://lore.kernel.org/r/20200118162542.15188-1-dab9861@gmail.com
Signed-off-by: Dillon Brock <dab9861@gmail.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Clang warns:
drivers/infiniband/hw/hfi1/msix.c:136:22: warning: overlapping
comparisons always evaluate to false [-Wtautological-overlap-compare]
if (type < IRQ_SDMA && type >= IRQ_OTHER)
~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
1 warning generated.
It is impossible for something to be less than 0 (IRQ_SDMA) and greater
than or equal to 3 (IRQ_OTHER) at the same time. A logical OR should
have been used to keep the same logic as before.
Link: https://lore.kernel.org/r/20200116222658.5285-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/841
Fixes: 13d2a8384b ("IB/hfi1: Decouple IRQ name from type")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All accesses now use the new IBA acessor scheme, so delete the structs
entirely and generate the structures from the schema file.
Link: https://lore.kernel.org/r/20200116170037.30109-8-jgg@ziepe.ca
Tested-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use a Coccinelle spatch script to replace use of simple CM structure
members with IBA_GET/SET versions. Applied with
$ spatch --sp-file edits.sp --in-place drivers/infiniband/core/cm.c
The spatch file was generated using the template pattern:
@@
expression val;
{struct} *msg;
@@
- msg->{old_name} = val
+ IBA_SET({new_name}, msg, be{bits}_to_cpu(val))
@@
{struct} *msg;
@@
- msg->{old_name}
+ cpu_to_be{bits}(IBA_GET({new_name}, msg))
Iterated for every IBA_CHECK_OFF that isn't a CM_FIELD_MLOC.
And the below iterated over all byte sizes to remove doubled byte swaps:
@@
expression val;
@@
-be{bits}_to_cpu(cpu_to_be{bits}(val))
+val
(and __be_to_cpu and ntoh varients)
Touched up with clang-format after.
Link: https://lore.kernel.org/r/20200116170037.30109-6-jgg@ziepe.ca
Tested-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use a Coccinelle spatch script to replace CM helper functions that
return/accept BE values with IBA_GET/SET versions. Applied with
$ spatch --sp-file edits.sp --in-place drivers/infiniband/core/cm.c
The spatch file was generated using the template pattern:
@@
expression val;
{struct} *msg;
@@
- {old_setter}(msg, val)
+ IBA_SET({new_name}, msg, be{bits}_to_cpu(val))
@@
{struct} *msg;
@@
- {old_getter}(msg)
+ cpu_to_be{bits}(IBA_GET({new_name}, msg))
Iterated for every IBA_CHECK_GET_BE()/IBA_CHECK_SET_BE() pairing.
And the below iterated over all byte sizes to remove doubled byte swaps:
@@
expression val;
@@
-be{bits}_to_cpu(cpu_to_be{bits}(val))
+val
(and __be_to_cpu and ntoh varients)
Touched up with clang-format after.
Link: https://lore.kernel.org/r/20200116170037.30109-5-jgg@ziepe.ca
Tested-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use a Coccinelle spatch to replace CM helper functions with IBA_GET/SET
versions. Applied with
$ spatch --sp-file edits.sp --in-place drivers/infiniband/core/cm.c
The spatch file was generated using the template pattern:
@@
expression val;
{struct} *msg;
@@
- {old_setter}
+ IBA_SET({new_name}, msg, val)
@@
{struct} *msg;
@@
- {old_getter}
+ IBA_GET({new_name}, msg)
Iterated for every IBA_CHECK_GET()/IBA_CHECK_GET() pairing. Touched up
with clang-format after.
Link: https://lore.kernel.org/r/20200116170037.30109-4-jgg@ziepe.ca
Tested-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no separation between RDMA-CM wire format as it is declared in
IBTA and kernel logic which implements needed support. Such situation
causes to many mistakes in conversion between big-endian (wire format)
and CPU format used by kernel. It also mixes RDMA core code with
combination of uXX and beXX variables.
The idea that all accesses to IBA definitions will go through special
GET/SET macros to ensure that no conversion mistakes are made. The
shifting and masking required to read the value is automatically deduced
using the field offset description from the tables in the IBA
specification.
This starts with the CM MADs described in IBTA release 1.3 volume 1.
To confirm that the new macros behave the same as the old accessors a
self-test is included in this patch.
Each macro replacing a straightforward struct field compile-time tests
that the new field has the same offsetof() and width as the old field.
For the fields with accessor functions a runtime test, the 'all ones'
value is placed in a dummy message and read back in several ways to
confirm that both approaches give identical results.
Later patches in this series delete the self test.
This creates a tested table of new field name, old field name(s) and some
meta information like BE coding for the functions which will be used in
the next patches.
Link: https://lore.kernel.org/r/20200116170037.30109-3-jgg@ziepe.ca
Link: https://lore.kernel.org/r/20191212093830.316934-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Access the two fields through wrappers, like all other fields, to make it
clearer what is happening.
Link: https://lore.kernel.org/r/20200116170037.30109-2-jgg@ziepe.ca
Tested-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A user can change the operational GUID (a.k.a affective GUID) through
link/infiniband. Therefore it is preferred to return the currently set
GUID if it exists instead of the operational.
This way the PF can query which VF GUID will be set in the next bind. In
order to align with MAC address, zero is returned if administrative GUID
is not set.
For example, before setting administrative GUID:
$ ip link show
ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 4092 qdisc mq state UP mode DEFAULT group default qlen 256
link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff,
spoof checking off, NODE_GUID 00:00:00:00:00:00:00:00, PORT_GUID 00:00:00:00:00:00:00:00, link-state auto, trust off, query_rss off
Then:
$ ip link set ib0 vf 0 node_guid 11:00:af:21:cb:05:11:00
$ ip link set ib0 vf 0 port_guid 22:11:af:21:cb:05:11:00
After setting administrative GUID:
$ ip link show
ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 4092 qdisc mq state UP mode DEFAULT group default qlen 256
link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff,
spoof checking off, NODE_GUID 11:00:af:21:cb:05:11:00, PORT_GUID 22:11:af:21:cb:05:11:00, link-state auto, trust off, query_rss off
Fixes: 9c0015ef09 ("IB/mlx5: Implement callbacks for getting VFs GUID attributes")
Link: https://lore.kernel.org/r/20200116120048.12744-1-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The set of entry->driver_removed is missing locking, protect it with
xa_lock() which is held by the only reader.
Otherwise readers may continue to see driver_removed = false after
rdma_user_mmap_entry_remove() returns and may continue to try and
establish new mmaps.
Fixes: 3411f9f01b ("RDMA/core: Create mmap database and cookie helper functions")
Link: https://lore.kernel.org/r/20200115202041.GA17199@ziepe.ca
Reviewed-by: Gal Pressman <galpress@amazon.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCXiVO8AAKCRAp8NhrnBAZ
scTrAP9gb0d3qv0IOtHw5aGI1DAgjTUn/SzUOnsjDEn7DIoh9gEA2+ZmaEyLXKrl
+UcZb31auy5P8ueJYokRLhLAyRcOIAg=
=yaHb
-----END PGP SIGNATURE-----
Merge tag 'rds-odp-for-5.5' into rdma.git for-next
From https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma
Leon Romanovsky says:
====================
Use ODP MRs for kernel ULPs
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
====================
* tag 'rds-odp-for-5.5':
net/rds: Use prefetch for On-Demand-Paging MR
net/rds: Handle ODP mr registration/unregistration
net/rds: Detect need of On-Demand-Paging memory registration
RDMA/mlx5: Fix handling of IOVA != user_va in ODP paths
IB/mlx5: Mask out unsupported ODP capabilities for kernel QPs
RDMA/mlx5: Don't fake udata for kernel path
IB/mlx5: Add ODP WQE handlers for kernel QPs
IB/core: Add interface to advise_mr for kernel users
IB/core: Introduce ib_reg_user_mr
IB: Allow calls to ib_umem_get from kernel ULPs
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCXiVO8AAKCRAp8NhrnBAZ
scTrAP9gb0d3qv0IOtHw5aGI1DAgjTUn/SzUOnsjDEn7DIoh9gEA2+ZmaEyLXKrl
+UcZb31auy5P8ueJYokRLhLAyRcOIAg=
=yaHb
-----END PGP SIGNATURE-----
Merge tag 'rds-odp-for-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma
Leon Romanovsky says:
====================
Use ODP MRs for kernel ULPs
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
iscsit_close_connection() calls isert_wait_conn(). Due to commit
e9d3009cb9 both functions call target_wait_for_sess_cmds() although that
last function should be called only once. Fix this by removing the
target_wait_for_sess_cmds() call from isert_wait_conn() and by only calling
isert_wait_conn() after target_wait_for_sess_cmds().
Fixes: e9d3009cb9 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session").
Link: https://lore.kernel.org/r/20200116044737.19507-1-bvanassche@acm.org
Reported-by: Rahul Kundu <rahul.kundu@chelsio.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This merge syncs with mlx5-next latest HW bits and layout updates for next
features, in addition one patch that improves
mlx5_create_auto_grouped_flow_table() API across all mlx5 users.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Refactor mlx5_create_auto_grouped_flow_table
net/mlx5e: Add discard counters per priority
net/mlx5e: Expose FEC feilds and related capability bit
net/mlx5: Add mlx5_ifc definitions for connection tracking support
net/mlx5: Add copy header action struct layout
net/mlx5: Expose resource dump register mapping
net/mlx5: Add structures and defines for MIRC register
net/mlx5: Read MCAM register groups 1 and 2
net/mlx5: Add structures layout for new MCAM access reg groups
net/mlx5: Expose vDPA emulation device capabilities
net/mlx5: Add Virtio Emulation related device capabilities
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Refactor mlx5_create_auto_grouped_flow_table() to use ft_attr param
which already carries the max_fte, prio and flags memebers, and is
used the same in similar mlx5_create_flow_table() function.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In procedure mlx4_ib_add_gid(), if the driver is unable to update the FW
gid table, there is a memory leak in the driver's copy of the gid table:
the gid entry's context buffer is not freed.
If such an error occurs, free the entry's context buffer, and mark the
entry as available (by setting its context pointer to NULL).
Fixes: e26be1bfef ("IB/mlx4: Implement ib_device callbacks")
Link: https://lore.kernel.org/r/20200115085050.73746-1-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce the following RoCE accelerator counters:
* roce_adp_retrans - number of adaptive retransmission for RoCE traffic.
* roce_adp_retrans_to - number of times RoCE traffic reached time out
due to adaptive retransmission.
* roce_slow_restart - number of times RoCE slow restart was used.
* roce_slow_restart_cnps - number of times RoCE slow restart
generate CNP packets.
* roce_slow_restart_trans - number of times RoCE slow restart change
state to slow restart.
Link: https://lore.kernel.org/r/20200115145459.83280-3-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Enable relaxed ordering in the mkey context when requested. As relaxed
ordering is not currently supported in UMR, disable UMR usage for relaxed
ordering MRs.
Link: https://lore.kernel.org/r/1578506740-22188-11-git-send-email-yishaih@mellanox.com
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the core support field to METHOD_GET_CONTEXT, this field should
represent capabilities that are not device-specific.
Return support for optional access flags for memory regions. User-space
will use this capability to mask the optional access flags for
unsupporting kernels.
Link: https://lore.kernel.org/r/1578506740-22188-10-git-send-email-yishaih@mellanox.com
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As part of adding a range of optional access flags that drivers need to be
able to accept, mask this range inside efa driver. This will prevent the
driver from failing when an access flag from that range is passed.
Link: https://lore.kernel.org/r/1578506740-22188-8-git-send-email-yishaih@mellanox.com
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Allow future extensions of the get context command through the uverbs
ioctl kabi.
Unlike the uverbs version this does not return an async_fd as well, that
has to be done with another command.
Link: https://lore.kernel.org/r/1578506740-22188-5-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This lock only serializes ucontext creation. Instead of checking the
ucontext_lock during destruction hold the existing hw_destroy_rwsem during
creation, which is the standard pattern for object creation.
The simplification of locking is needed for the next patch.
Link: https://lore.kernel.org/r/1578506740-22188-4-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Allow the async FD to be allocated separately from the context.
This is necessary to introduce the ioctl to create a context, as an ioctl
should only ever create a single uobject at a time.
If multiple async FDs are created then the first one is used to deliver
affiliated events from any ib_uevent_object, with all subsequent ones will
receive only unaffiliated events.
Link: https://lore.kernel.org/r/1578506740-22188-3-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Till recently it was not possible for userspace to specify a different
IOVA, but with the new ibv_reg_mr_iova() library call this can be done.
To compute the user_va we must compute:
user_va = (iova - iova_start) + user_va_start
while being cautious of overflow and other math problems.
The iova is not reliably stored in the mmkey when the MR is created. Only
the cached creation path (the common one) set it, so it must also be set
when creating uncached MRs.
Fix the weird use of iova when computing the starting page index in the
MR. In the normal case, when iova == umem.address:
iova & (~(BIT(page_shift) - 1)) ==
ALIGN_DOWN(umem.address, odp->page_size) ==
ib_umem_start(odp)
And when iova is different using it in math with a user_va is wrong.
Finally, do not allow an implicit ODP to be created with a non-zero IOVA
as we have no support for that.
Fixes: 7bdf65d411 ("IB/mlx5: Handle page faults")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The ODP handler for WQEs in RQ or SRQ is not implented for kernel QPs.
Therefore don't report support in these if query comes from a kernel user.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
One of the steps in ODP page fault handler for WQEs is to read a WQE
from a QP send queue or receive queue buffer at a specific index.
Since the implementation of this buffer is different between kernel and
user QP the implementation of the handler needs to be aware of that and
handle it in a different way.
ODP for kernel MRs is currently supported only for RDMA_READ
and RDMA_WRITE operations so change the handler to
- read a WQE from a kernel QP send queue
- fail if access to receive queue or shared receive queue is
required for a kernel QP
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Allow ULPs to call advise_mr, so they can control ODP regions
in the same way as user space applications.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add ib_reg_user_mr() for kernel ULPs to register user MRs.
The common use case that uses this function is a userspace application
that allocates memory for HCA access but the responsibility to register
the memory at the HCA is on an kernel ULP. This ULP that acts as an agent
for the userspace application.
This function is intended to be used without a user context so vendor
drivers need to be aware of calling reg_user_mr() device operation with
udata equal to NULL.
Among all drivers, i40iw is the only driver which relies on presence
of udata, so check udata existence for that driver.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
So far the assumption was that ib_umem_get() and ib_umem_odp_get()
are called from flows that start in UVERBS and therefore has a user
context. This assumption restricts flows that are initiated by ULPs
and need the service that ib_umem_get() provides.
This patch changes ib_umem_get() and ib_umem_odp_get() to get IB device
directly by relying on the fact that both UVERBS and ULPs sets that
field correctly.
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Some SRP targets that do not support specification SRP-2, put the garbage
to the reserved bits of the SRP login response. The problem was not
detected for a long time because the SRP initiator ignored those bits. But
now one of them is used as SRP_LOGIN_RSP_IMMED_SUPP. And it causes a
critical error on the target when the initiator sends immediate data.
The ib_srp module has a use_imm_date parameter to enable or disable
immediate data manually. But it does not help in the above case, because
use_imm_date is ignored at handling the SRP login response. The problem is
definitely caused by a bug on the target side, but the initiator's
behavior also does not look correct. The initiator should not use
immediate data if use_imm_date is disabled by a user.
This commit adds an additional checking of use_imm_date at the handling of
SRP login response to avoid unexpected use of immediate data.
Fixes: 882981f4a4 ("RDMA/srp: Add support for immediate data")
Link: https://lore.kernel.org/r/20200115133055.30232-1-sergeygo@mellanox.com
Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The SGE buffer size and max_inline data should be derived from the size of
the WQE. Each value individually sets the WQE size, so compute the actual
sizes based on the actual WQE size and configure the QP with the maximums.
Also fix the missing return of the actual maximum capability to the caller.
Link: https://lore.kernel.org/r/1578962480-17814-3-git-send-email-rao.shoaib@oracle.com
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ucontext parameter is unused, remove it.
Link: https://lore.kernel.org/r/20200114085706.82229-6-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The {} brackets are not needed according to the Linux coding style.
Link: https://lore.kernel.org/r/20200114085706.82229-5-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Various clarifications and updates to the documentation of the device
definitions.
No functional changes in this patch.
Link: https://lore.kernel.org/r/20200114085706.82229-4-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
To support extended atomic operations including cmp & swap and fetch & add
of 8 bytes, 16 bytes, 32 bytes, 64 bytes in userspace, some field in qpc
should be configured.
Link: https://lore.kernel.org/r/1579052546-11746-1-git-send-email-liweihang@huawei.com
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Get pf capabilities from firmware according to different hardwares, if it
fails, all capabilities will be set with a default value.
Link: https://lore.kernel.org/r/1578738761-3176-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
pf capabilities are set by default for hip08 previously which should
depends on different types of hardware. So add new interfaces to get them
from firmware.
Link: https://lore.kernel.org/r/1578738761-3176-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In struct hns_roce_caps, max_srq_sg and max_srqwqes is unused, and
max_srqs has the same effect with num_srqs. So remove them from this
structrue.
Link: https://lore.kernel.org/r/1578738761-3176-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The writer for async_file holds the ucontext_lock, while the readers are
left unlocked. Most readers rely on an implicit locking, either by having
a uobject (which cannot be created before a context) or by holding the
ib_ufile kref.
However ib_uverbs_free_hw_resources() has no implicit lock and has a
possible race. Make this all clear and sane by using READ_ONCE
consistently.
Link: https://lore.kernel.org/r/1578504126-9400-15-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This makes async events aligned with completion events as both are full
uobjects of FD type and use the same uobject lifecycle.
A bunch of duplicate code is consolidated and the general flow between the
two FDs is now very similar.
Link: https://lore.kernel.org/r/1578504126-9400-14-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that all callers provide a non-NULL attrs the ufile is redundant.
Adjust things so that the context handling is done inside alloc_uobj,
and the ib_uverbs_get_ucontext_file() is avoided if we already have the
context.
Link: https://lore.kernel.org/r/1578504126-9400-13-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This function works on an ib_uverbs_async_file. Accept that as a parameter
instead of the struct ib_uverbs_file.
Consoldiate all the callers working from an ib_uevent_object to a single
function and locate the async_file directly from the struct ib_uobject
instead of using context_ptr.
Link: https://lore.kernel.org/r/1578504126-9400-11-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Any uobject that sends events into the async_event_file should be using
ib_uevent_object so it can use the standard uevent based helper
functions. CQ pushes events into both the async_event and the comp_channel
in an open coded way. Move the async events related stuff to
ib_uevent_object.
Link: https://lore.kernel.org/r/1578504126-9400-6-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is a left over from an earlier version that creates a lot of
complexity for error unwind, particularly for FD uobjects.
The only reason this was done is so that anon_inode_get_file() could be
called with the final fops and a fully setup uobject. Both need to be
setup since unwinding anon_inode_get_file() via fput will call the
driver's release().
Now that the driver does not provide release, we no longer need to worry
about this complicated sequence, simply create the struct file at the
start and allow the core code's release function to deal with the abort
case.
This allows all the confusing error paths around commit to be removed.
Link: https://lore.kernel.org/r/1578504126-9400-5-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
With the new FD structure the async commands do not need to hold any
references while running. The existing mlx5_cmd_exec_cb() and
mlx5_cmd_cleanup_async_ctx() provide enough synchronization to ensure
that all outstanding commands are completed before the uobject can be
destructed.
Remove the now confusing get_file() and the type erasure of the
devx_async_cmd_event_file.
Link: https://lore.kernel.org/r/1578504126-9400-4-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
FD uobjects have a weird split between the struct file and uobject
world. Simplify this to make them pure uobjects and use a generic release
method for all struct file operations.
This fixes the control flow so that mlx5_cmd_cleanup_async_ctx() is always
called before erasing the linked list contents to make the concurrancy
simpler to understand.
For this to work the uobject destruction must fence anything that it is
cleaning up - the design must not rely on struct file lifetime.
Only deliver_event() relies on the struct file to when adding new events
to the queue, add a is_destroyed check under lock to block it.
Link: https://lore.kernel.org/r/1578504126-9400-3-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
dispatch_event_fd() runs from a notifier with minimal locking, and relies
on RCU and a file refcount to keep the uobject and eventfd alive.
As the next patch wants to remove the file_operations release function
from the drivers, re-organize things so that the devx_event_notifier()
path uses the existing RCU to manage the lifetime of the uobject and
eventfd.
Move the refcount puts to a call_rcu so that the objects are guaranteed to
exist and remove the indirect file refcount.
Link: https://lore.kernel.org/r/1578504126-9400-2-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
After device disassociation the uapi_objects are destroyed and freed,
however it is still possible that core code can be holding a kref on the
uobject. When it finally goes to uverbs_uobject_free() via the kref_put()
it can trigger a use-after-free on the uapi_object.
Since needs_kfree_rcu is a micro optimization that only benefits file
uobjects, just get rid of it. There is no harm in using kfree_rcu even if
it isn't required, and the number of involved objects is small.
Link: https://lore.kernel.org/r/20200113143306.GA28717@ziepe.ca
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add mmap support for VAR, it uses the 'offset' command mode with
involvement of IB core APIs to find the previously allocated mmap entry.
Link: https://lore.kernel.org/r/20191212110928.334995-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce VAR object and its alloc/destroy KABI methods. The internal
implementation uses the IB core API to manage mmap/munamp calls.
Link: https://lore.kernel.org/r/20191212110928.334995-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When hardware is in resetting stage, we may can't poll back all the
expected work completions as the hardware won't generate cqe anymore.
This patch allows the driver to compose the expected wc instead of the
hardware during resetting stage. Once the hardware finished resetting, we
can poll cq from hardware again.
Link: https://lore.kernel.org/r/1578572412-25756-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Driver should first check whether the sge is valid, then fill the valid
sge and the caculated total into hardware, otherwise invalid sges will
cause an error.
Fixes: 52e3b42a2f ("RDMA/hns: Filter for zero length of sge in hip08 kernel mode")
Fixes: 7bdee4158b ("RDMA/hns: Fill sq wqe context of ud type in hip08")
Link: https://lore.kernel.org/r/1578571852-13704-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This counter, RxShrErr, is required for error analysis and debug.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20200106134235.119356.29123.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All other code paths increment some form of drop counter.
This was missed in the original implementation.
Fixes: 82c2611daa ("staging/rdma/hfi1: Handle packets with invalid RHF on context 0")
Link: https://lore.kernel.org/r/20200106134228.119356.96828.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Packet receiving functions returns int value, and yet the return values
are not used at all.
This patch converts the functions to return void.
Link: https://lore.kernel.org/r/20200106134222.119356.84098.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IRQ name was connected to IRQ type, this is not sufficient and it would be
better to use name as argument to msix_request_irq instead of assigning it
to variables when function is called.
Index argument was required to generate name and now it can be removed.
To generate name correctly helpers function were added and updated.
Link: https://lore.kernel.org/r/20200106134216.119356.44478.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add an auto activate routine for use by the interrupt handler.
Link: https://lore.kernel.org/r/20200106134210.119356.43079.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch pushes special case drop logic into an API to be shared by all
interrupt handlers.
Additionally, convert do_drop to a bool.
Link: https://lore.kernel.org/r/20200106134203.119356.36962.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Tracing interrupts, incrementing interrupt counter and ASPM are part that
will be reused by HFI1 receive IRQ handlers.
Create common function to have shared code in one place.
Link: https://lore.kernel.org/r/20200106134157.119356.32656.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch eliminate special cases by adding a fast_handler member to the
receive context and changes to the fast handler as specified in the new
variable. Initialize the variable as soon as the setting for dma tail is
known when the context is created.
Setting fast path is called every time when any context has entered slow
path. Add function to check if contexts is using fast path and do not set
fast path when it is already done to improve RCD fastpath setting.
Link: https://lore.kernel.org/r/20200106134150.119356.87558.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move routines and defines associated with hdrq size validation to a chip
specific routine since the limits are specific to the device.
Fix incorrect value for min size 2 -> 32
CSR writes should also be in chip.c.
Create a chip routine to write the hdrq specific CSRs and call as
appropriate.
Link: https://lore.kernel.org/r/20200106134144.119356.74312.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This should not be using ib_dev to test for disassociation, during
disassociation is_closed is set under lock and the waitq is triggered.
Instead check is_closed and be sure to re-obtain the lock to test the
value after the wait_event returns.
Fixes: 036b106357 ("IB/uverbs: Enable device removal when there are active user space applications")
Link: https://lore.kernel.org/r/1578504126-9400-12-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HPAGE_SHIFT is only defined on architectures that support hugepages:
drivers/infiniband/core/umem_odp.c: In function 'ib_umem_odp_get':
drivers/infiniband/core/umem_odp.c:245:26: error: 'HPAGE_SHIFT' undeclared (first use in this function); did you mean 'PAGE_SHIFT'?
Enclose this in an #ifdef.
Fixes: 9ff1b6466a ("IB/core: Fix ODP with IB_ACCESS_HUGETLB handling")
Link: https://lore.kernel.org/r/20200109084740.2872079-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This lock is used to protect the qp->open_list linked list. As a side
effect it seems to also globally serialize the qp event_handler, but it
isn't clear if that is a deliberate design.
Link: https://lore.kernel.org/r/20191212113024.336702-5-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Given that ib_cache structure has only single member now, merge the cache
lock directly in the ib_device.
Link: https://lore.kernel.org/r/20191212113024.336702-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently when the low level driver notifies Pkey, GID, and port change
events they are notified to the registered handlers in the order they are
registered.
IB core and other ULPs such as IPoIB are interested in GID, LID, Pkey
change events.
Since all GID queries done by ULPs are serviced by IB core, and the IB
core deferes cache updates to a work queue, it is possible for other
clients to see stale cache data when they handle their own events.
For example, the below call tree shows how ipoib will call
rdma_query_gid() concurrently with the update to the cache sitting in the
WQ.
mlx5_ib_handle_event()
ib_dispatch_event()
ib_cache_event()
queue_work() -> slow cache update
[..]
ipoib_event()
queue_work()
[..]
work handler
ipoib_ib_dev_flush_light()
__ipoib_ib_dev_flush()
ipoib_dev_addr_changed_valid()
rdma_query_gid() <- Returns old GID, cache not updated.
Move all the event dispatch to a work queue so that the cache update is
always done before any clients are notified.
Fixes: f35faa4ba9 ("IB/core: Simplify ib_query_gid to always refer to cache")
Link: https://lore.kernel.org/r/20191212113024.336702-3-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When IB device profile initialization completes, device is marked as
active.
However, IB device is not marked inactive, during device removal flow. It
should be the mirror of the add flow.
Hence, mark it inactive during remove sequence.
Link: https://lore.kernel.org/r/20191212113024.336702-2-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix some coding style issuses without changing logic of codes, most of the
modification is unreasonable line breaks and alignments.
Link: https://lore.kernel.org/r/1578313276-29080-8-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are already necessary prints in outer function, prints in
hns_roce_function_clear() may confuse users. So these prints is removed.
Link: https://lore.kernel.org/r/1578313276-29080-6-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current state and new state of qp won't be configured when modifying qp,
so these two redundant parameters should be removed.
Link: https://lore.kernel.org/r/1578313276-29080-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The values used to represent service type of RC and UD should be
interchanged according to design of hardware. And it's better to define
these types in enumeration than macros.
Link: https://lore.kernel.org/r/1578313276-29080-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
hns_roce_init_eq_table() is an unused function that only retains its
declaration in driver.
Link: https://lore.kernel.org/r/1578313276-29080-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Sample trace events:
kworker/u29:0-300 [007] 120.042217: cq_alloc: cq.id=4 nr_cqe=161 comp_vector=2 poll_ctx=WORKQUEUE
<idle>-0 [002] 120.056292: cq_schedule: cq.id=4
kworker/2:1H-482 [002] 120.056402: cq_process: cq.id=4 wake-up took 109 [us] from interrupt
kworker/2:1H-482 [002] 120.056407: cq_poll: cq.id=4 requested 16, returned 1
<idle>-0 [002] 120.067503: cq_schedule: cq.id=4
kworker/2:1H-482 [002] 120.067537: cq_process: cq.id=4 wake-up took 34 [us] from interrupt
kworker/2:1H-482 [002] 120.067541: cq_poll: cq.id=4 requested 16, returned 1
<idle>-0 [002] 120.067657: cq_schedule: cq.id=4
kworker/2:1H-482 [002] 120.067672: cq_process: cq.id=4 wake-up took 15 [us] from interrupt
kworker/2:1H-482 [002] 120.067674: cq_poll: cq.id=4 requested 16, returned 1
...
systemd-1 [002] 122.392653: cq_schedule: cq.id=4
kworker/2:1H-482 [002] 122.392688: cq_process: cq.id=4 wake-up took 35 [us] from interrupt
kworker/2:1H-482 [002] 122.392693: cq_poll: cq.id=4 requested 16, returned 16
kworker/2:1H-482 [002] 122.392836: cq_poll: cq.id=4 requested 16, returned 16
kworker/2:1H-482 [002] 122.392970: cq_poll: cq.id=4 requested 16, returned 16
kworker/2:1H-482 [002] 122.393083: cq_poll: cq.id=4 requested 16, returned 16
kworker/2:1H-482 [002] 122.393195: cq_poll: cq.id=4 requested 16, returned 3
Several features to note in this output:
- The WCE count and context type are reported at allocation time
- The CPU and kworker for each CQ is evident
- The CQ's restracker ID is tagged on each trace event
- CQ poll scheduling latency is measured
- Details about how often single completions occur versus multiple
completions are evident
- The cost of the ULP's completion handler is recorded
Link: https://lore.kernel.org/r/20191218201815.30584.3481.stgit@manet.1015granger.net
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Record state transitions as each connection is established. The IP address
of both peers and the Type of Service is reported. These trace points are
not in performance hot paths.
Also, record each cm_event_handler call to ULPs. This eliminates the need
for each ULP to add its own similar trace point in its CM event handler
function.
These new trace points appear in a new trace subsystem called "rdma_cma".
Sample events:
<...>-220 [004] 121.430733: cm_id_create: cm.id=0
<...>-472 [003] 121.430991: cm_event_handler: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 ADDR_RESOLVED (0/0)
<...>-472 [003] 121.430995: cm_event_done: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 result=0
<...>-472 [003] 121.431172: cm_event_handler: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 ROUTE_RESOLVED (2/0)
<...>-472 [003] 121.431174: cm_event_done: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 result=0
<...>-220 [004] 121.433480: cm_qp_create: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 pd.id=2 qp_type=RC send_wr=4091 recv_wr=256 qp_num=521 rc=0
<...>-220 [004] 121.433577: cm_send_req: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 qp_num=521
kworker/1:2-973 [001] 121.436190: cm_send_mra: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
kworker/1:2-973 [001] 121.436340: cm_send_rtu: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
kworker/1:2-973 [001] 121.436359: cm_event_handler: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 ESTABLISHED (9/0)
kworker/1:2-973 [001] 121.436365: cm_event_done: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 result=0
<...>-1975 [005] 123.161954: cm_disconnect: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
<...>-1975 [005] 123.161974: cm_sent_dreq: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
<...>-220 [004] 123.162102: cm_disconnect: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
kworker/0:1-13 [000] 123.162391: cm_event_handler: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 DISCONNECTED (10/0)
kworker/0:1-13 [000] 123.162393: cm_event_done: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 result=0
<...>-220 [004] 123.164456: cm_qp_destroy: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 qp_num=521
<...>-220 [004] 123.165290: cm_id_destroy: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
Some features to note:
- restracker ID of the rdma_cm_id is tagged on each trace event
- The source and destination IP addresses and TOS are reported
- CM event upcalls are shown with decoded event and status
- CM state transitions are reported
- rdma_cm_id lifetime events are captured
- The latency of ULP CM event handlers is reported
- Lifetime events of associated QPs are reported
- Device removal and insertion is reported
This patch is based on previous work by:
Saeed Mahameed <saeedm@mellanox.com>
Mukesh Kacker <mukesh.kacker@oracle.com>
Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com>
Aron Silverton <aron.silverton@oracle.com>
Avinash Repaka <avinash.repaka@oracle.com>
Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Link: https://lore.kernel.org/r/20191218201810.30584.3052.stgit@manet.1015granger.net
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
vm_ops is now initialized in ib_uverbs_mmap() with the recent rdma mmap
API changes. Earlier it was done in rdma_umap_priv_init() which would not
be called unless a driver called rdma_user_mmap_io() in its mmap.
i40iw does not use the rdma_user_mmap_io API but sets the vma's
vm_private_data to a driver object. This now conflicts with the vm_op
rdma_umap_close as priv pointer points to the i40iw driver object instead
of the private data setup by core when rdma_user_mmap_io is called. This
leads to a crash in rdma_umap_close with a mmap put being called when it
should not have.
Remove the redundant setting of the vma private_data in i40iw as it is not
used. Also move i40iw over to use the rdma_user_mmap_io API. This gives
the extra protection of having the mappings zapped when the context is
detsroyed.
BUG: unable to handle page fault for address: 0000000100000001
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 6 PID: 9528 Comm: rping Kdump: loaded Not tainted 5.5.0-rc4+ #117
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014
RIP: 0010:rdma_user_mmap_entry_put+0xa/0x30 [ib_core]
RSP: 0018:ffffb340c04c7c38 EFLAGS: 00010202
RAX: 00000000ffffffff RBX: ffff9308e7be2a00 RCX: 000000000000cec0
RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000100000001
RBP: ffff9308dc7641f0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: ffffffff8d4414d8 R12: ffff93075182c780
R13: 0000000000000001 R14: ffff93075182d2a8 R15: ffff9308e2ddc840
FS: 0000000000000000(0000) GS:ffff9308fdc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000100000001 CR3: 00000002e0412004 CR4: 00000000001606e0
Call Trace:
rdma_umap_close+0x40/0x90 [ib_uverbs]
remove_vma+0x43/0x80
exit_mmap+0xfd/0x1b0
mmput+0x6e/0x130
do_exit+0x290/0xcc0
? get_signal+0x152/0xc40
do_group_exit+0x46/0xc0
get_signal+0x1bd/0xc40
? prepare_to_wait_event+0x97/0x190
do_signal+0x36/0x630
? remove_wait_queue+0x60/0x60
? __audit_syscall_exit+0x1d9/0x290
? rcu_read_lock_sched_held+0x52/0x90
? kfree+0x21c/0x2e0
exit_to_usermode_loop+0x4f/0xc3
do_syscall_64+0x1ed/0x270
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fae715a81fd
Code: Bad RIP value.
RSP: 002b:00007fae6e163cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: fffffffffffffe00 RBX: 00007fae6e163d30 RCX: 00007fae715a81fd
RDX: 0000000000000010 RSI: 00007fae6e163cf0 RDI: 0000000000000003
RBP: 00000000013413a0 R08: 00007fae68000000 R09: 0000000000000017
R10: 0000000000000001 R11: 0000000000000293 R12: 00007fae680008c0
R13: 00007fae6e163cf0 R14: 00007fae717c9804 R15: 00007fae6e163ed0
CR2: 0000000100000001
---[ end trace b33d58d3a06782cb ]---
RIP: 0010:rdma_user_mmap_entry_put+0xa/0x30 [ib_core]
Fixes: b86deba977 ("RDMA/core: Move core content from ib_uverbs to ib_core")
Link: https://lore.kernel.org/r/20200107162223.1745-1-shiraz.saleem@intel.com
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Clean the code by deleting ARP functions, which are not called anyway.
Link: https://lore.kernel.org/r/20191212093830.316934-46-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Clean the code by deleting LAP functions, which are not called anyway.
Link: https://lore.kernel.org/r/20191212093830.316934-43-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A NULL pointer can be returned by in_dev_get(). Thus add a corresponding
check so that a NULL pointer dereference will be avoided at this place.
Fixes: 8e06af711b ("i40iw: add main, hdr, status")
Link: https://lore.kernel.org/r/1577672668-46499-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The type of mmap_offset should be u64 instead of int to match the type of
mminfo.offset. If otherwise, after we create several thousands of CQs, it
will run into overflow issues.
Link: https://lore.kernel.org/r/20191227113613.5020-1-kejiewei.cn@gmail.com
Signed-off-by: Jiewei Ke <kejiewei.cn@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes coccicheck warning:
drivers/infiniband/hw/mlx5/mr.c:150:2-26: WARNING: Assignment of 0/1 to bool variable
drivers/infiniband/hw/mlx5/mr.c:1455:2-26: WARNING: Assignment of 0/1 to bool variable
drivers/infiniband/hw/mlx5/qp.c:1874:6-20: WARNING: Assignment of 0/1 to bool variable
Link: https://lore.kernel.org/r/1577176812-2238-6-git-send-email-zhengbin13@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As VMAs for a given range might not be available as part of the
registration phase in ODP.
ib_init_umem_odp() considered the expected page shift value that was
previously set and initializes its internals accordingly.
If memory isn't backed by physical contiguous pages aligned to a hugepage
boundary an error will be set as part of the page fault flow and come back
to the user as some failed RDMA operation.
Fixes: 0008b84ea9 ("IB/umem: Add support to huge ODP")
Link: https://lore.kernel.org/r/20191222124649.52300-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The nr_pages argument of get_user_pages_remote() should always be in terms
of the system page size, not the MR page size. Use PAGE_SIZE instead of
umem_odp->page_shift.
Fixes: 403cd12e2c ("IB/umem: Add contiguous ODP support")
Link: https://lore.kernel.org/r/20191222124649.52300-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Building MR translation table in the ODP case requires additional
flexibility, namely random access to DMA addresses. Make both direct and
indirect ODP MR use same code path, separated from the non-ODP MR code
path.
With the restructuring the correct page_shift is now used around
__mlx5_ib_populate_pas().
Fixes: d2183c6f19 ("RDMA/umem: Move page_shift from ib_umem to ib_odp_umem")
Link: https://lore.kernel.org/r/20191222124649.52300-2-leon@kernel.org
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a TID RDMA ACK to RESYNC request is received, the flow PSNs for
pending TID RDMA WRITE segments will be adjusted with the next flow
generation number, based on the resync_psn value extracted from the flow
PSN of the TID RDMA ACK packet. The resync_psn value indicates the last
flow PSN for which a TID RDMA WRITE DATA packet has been received by the
responder and the requester should resend TID RDMA WRITE DATA packets,
starting from the next flow PSN.
However, if resync_psn points to the last flow PSN for a segment and the
next segment flow PSN starts with a new generation number, use of the old
resync_psn to adjust the flow PSN for the next segment will lead to
miscalculation, resulting in WARN_ON and sge rewinding errors:
WARNING: CPU: 4 PID: 146961 at /nfs/site/home/phcvs2/gitrepo/ifs-all/components/Drivers/tmp/rpmbuild/BUILD/ifs-kernel-updates-3.10.0_957.el7.x86_64/hfi1/tid_rdma.c:4764 hfi1_rc_rcv_tid_rdma_ack+0x8f6/0xa90 [hfi1]
Modules linked in: ib_ipoib(OE) hfi1(OE) rdmavt(OE) rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfsv3 nfs_acl nfs lockd grace fscache iTCO_wdt iTCO_vendor_support skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm irqbypass crc32_pclmul ghash_clmulni_intel ib_isert iscsi_target_mod target_core_mod aesni_intel lrw gf128mul glue_helper ablk_helper cryptd rpcrdma sunrpc opa_vnic ast ttm ib_iser libiscsi drm_kms_helper scsi_transport_iscsi ipmi_ssif syscopyarea sysfillrect sysimgblt fb_sys_fops drm joydev ipmi_si pcspkr sg drm_panel_orientation_quirks ipmi_devintf lpc_ich i2c_i801 ipmi_msghandler wmi rdma_ucm ib_ucm ib_uverbs acpi_cpufreq acpi_power_meter ib_umad rdma_cm ib_cm iw_cm ip_tables ext4 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul i2c_algo_bit crct10dif_common
crc32c_intel e1000e ib_core ahci libahci ptp libata pps_core nfit libnvdimm [last unloaded: rdmavt]
CPU: 4 PID: 146961 Comm: kworker/4:0H Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.el7.x86_64 #1
Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.0X.02.0117.040420182310 04/04/2018
Workqueue: hfi0_0 _hfi1_do_tid_send [hfi1]
Call Trace:
<IRQ> [<ffffffff9e361dc1>] dump_stack+0x19/0x1b
[<ffffffff9dc97648>] __warn+0xd8/0x100
[<ffffffff9dc9778d>] warn_slowpath_null+0x1d/0x20
[<ffffffffc05d28c6>] hfi1_rc_rcv_tid_rdma_ack+0x8f6/0xa90 [hfi1]
[<ffffffffc05c21cc>] hfi1_kdeth_eager_rcv+0x1dc/0x210 [hfi1]
[<ffffffffc05c23ef>] ? hfi1_kdeth_expected_rcv+0x1ef/0x210 [hfi1]
[<ffffffffc0574f15>] kdeth_process_eager+0x35/0x90 [hfi1]
[<ffffffffc0575b5a>] handle_receive_interrupt_nodma_rtail+0x17a/0x2b0 [hfi1]
[<ffffffffc056a623>] receive_context_interrupt+0x23/0x40 [hfi1]
[<ffffffff9dd4a294>] __handle_irq_event_percpu+0x44/0x1c0
[<ffffffff9dd4a442>] handle_irq_event_percpu+0x32/0x80
[<ffffffff9dd4a4cc>] handle_irq_event+0x3c/0x60
[<ffffffff9dd4d27f>] handle_edge_irq+0x7f/0x150
[<ffffffff9dc2e554>] handle_irq+0xe4/0x1a0
[<ffffffff9e3795dd>] do_IRQ+0x4d/0xf0
[<ffffffff9e36b362>] common_interrupt+0x162/0x162
<EOI> [<ffffffff9dfa0f79>] ? swiotlb_map_page+0x49/0x150
[<ffffffffc05c2ed1>] hfi1_verbs_send_dma+0x291/0xb70 [hfi1]
[<ffffffffc05c2c40>] ? hfi1_wait_kmem+0xf0/0xf0 [hfi1]
[<ffffffffc05c3f26>] hfi1_verbs_send+0x126/0x2b0 [hfi1]
[<ffffffffc05ce683>] _hfi1_do_tid_send+0x1d3/0x320 [hfi1]
[<ffffffff9dcb9d4f>] process_one_work+0x17f/0x440
[<ffffffff9dcbade6>] worker_thread+0x126/0x3c0
[<ffffffff9dcbacc0>] ? manage_workers.isra.25+0x2a0/0x2a0
[<ffffffff9dcc1c31>] kthread+0xd1/0xe0
[<ffffffff9dcc1b60>] ? insert_kthread_work+0x40/0x40
[<ffffffff9e374c1d>] ret_from_fork_nospec_begin+0x7/0x21
[<ffffffff9dcc1b60>] ? insert_kthread_work+0x40/0x40
This patch fixes the issue by adjusting the resync_psn first if the flow
generation has been advanced for a pending segment.
Fixes: 9e93e967f7 ("IB/hfi1: Add a function to receive TID RDMA ACK packet")
Link: https://lore.kernel.org/r/20191219231920.51069.37147.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Comments need to be with the definition of rvt_restart_sge().
Other comments were duplicated in sw/rdmavt/rc.c and were removed.
Fixes: 385156c5f2 ("IB/hfi: Move RC functions into a header file")
Link: https://lore.kernel.org/r/20191219211934.58387.88014.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current debugfs output for receive contexts (rcds), stops after the
kernel receive contexts have been displayed. This is not enough
information to fully diagnose packet drops.
Display all of the receive contexts.
Augment the output with some more context information.
Limit the ring buffer header output to 5 entries to avoid overextending
the sequential file output.
Fixes: bf808b5039 ("IB/hfi1: Add kernel receive context info to debugfs")
Link: https://lore.kernel.org/r/20191219211928.58387.20737.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds a set of accessor routines to access context members.
Link: https://lore.kernel.org/r/20191219211922.58387.26548.stgit@awfm-01.aw.intel.com
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the iowait structure, two iowait_work entries were included to queue a
given object: one for normal IB operations, and the other for TID RDMA
operations. For non-TID RDMA operations, the iowait_work structure for TID
RDMA is initialized to contain a NULL function (not used). When the QP is
reset, the function iowait_cancel_work will be called to cancel any
pending work. The problem is that this function will call
cancel_work_sync() for both iowait_work entries, even though the one for
TID RDMA is not used at all. Eventually, the call cascades to
__flush_work(), wherein a WARN_ON will be triggered due to the fact that
work->func is NULL.
The WARN_ON was introduced in commit 4d43d395fe ("workqueue: Try to
catch flush_work() without INIT_WORK().")
This patch fixes the issue by making sure that a work function is present
for TID RDMA before calling cancel_work_sync in iowait_cancel_work.
Fixes: 4d43d395fe ("workqueue: Try to catch flush_work() without INIT_WORK().")
Fixes: 5da0fc9dbf ("IB/hfi1: Prepare resource waits for dual leg")
Link: https://lore.kernel.org/r/20191219211941.58387.39883.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ingress checksum offload was not working for IPv6 frames because the
conditional expression that checks validation status passed from the
hardware was not matching the algorithm described in the documentation.
This patch defines L4_CSUM flag (which falls inside the badfcs_enc field
in the existing definition of the CQE layout) and replaces the conditional
expression with the one defined in the "ConnectX(r) Family Programmer's
Manual" document.
Link: https://lore.kernel.org/r/20191219134847.413582-1-leon@kernel.org
Signed-off-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The RCU mechanism is optimized for read-mostly scenarios and therefore
more suitable to protect the cm_id_private to decrease "cm.lock"
congestion.
This patch replaces the existing spinlock locking mechanism and kfree with
RCU mechanism in places where spinlock(cm.lock) protected xa_load
returning the cm_id_priv
In addition, delete the cm_get_id() function as there is no longer a
distinction if the caller already holds the cm_lock.
Remove an open coded version of cm_get_id().
Link: https://lore.kernel.org/r/20191219134750.413429-1-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since ch has already been de-referenced by the time we get to the BUG_ON,
it is useless. The back trace alone is enough to tell what is going on,
delete the redundant BUG_ON.
Link: https://lore.kernel.org/r/20191217194437.25568-1-pakki001@umn.edu
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In rdma_nl_rcv_skb(), the local variable err is assigned the return value
of the supplied callback function, which could be one of
ib_nl_handle_resolve_resp(), ib_nl_handle_set_timeout(), or
ib_nl_handle_ip_res_resp(). These three functions all return skb->len on
success.
rdma_nl_rcv_skb() is merely a copy of netlink_rcv_skb(). The callback
functions used by the latter have the convention: "Returns 0 on success or
a negative error code".
In particular, the statement (equal for both functions):
if (nlh->nlmsg_flags & NLM_F_ACK || err)
implies that rdma_nl_rcv_skb() always will ack a message, independent of
the NLM_F_ACK being set in nlmsg_flags or not.
The fix could be to change the above statement, but it is better to keep
the two *_rcv_skb() functions equal in this respect and instead change the
three callback functions in the rdma subsystem to the correct convention.
Fixes: 2ca546b92a ("IB/sa: Route SA pathrecord query through netlink")
Fixes: ae43f82867 ("IB/core: Add IP to GID netlink offload")
Link: https://lore.kernel.org/r/20191216120436.3204814-1-haakon.bugge@oracle.com
Suggested-by: Mark Haywood <mark.haywood@oracle.com>
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Tested-by: Mark Haywood <mark.haywood@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Commit b0ffeb537f ("IB/mlx5: Fix iteration overrun in GSI qps") changed
the way outstanding WRs are tracked for the GSI QP. But the fix did not
cover the case when a call to ib_post_send() fails and updates index to
track outstanding.
Since the prior commmit outstanding_pi should not be bounded otherwise the
loop generate_completions() will fail.
Fixes: b0ffeb537f ("IB/mlx5: Fix iteration overrun in GSI qps")
Link: https://lore.kernel.org/r/1576195889-23527-1-git-send-email-psajeepa@purestorage.com
Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Change siw_qp to contain ib_qp. Use rdma_is_kernel_res() on contained
ib_qp to distinguish kernel level from user level applications
resources. Apply same mechanism for kernel/user level application
detection to completion queues.
Link: https://lore.kernel.org/r/20191210161729.31598-1-bmt@zurich.ibm.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, the wqe idx is calculated repeatly everywhere it is used. This
patch defines wqe_idx and calculated it only once, then just use it as
needed.
Fixes: 2d40788825 ("RDMA/hns: Add support for processing send wr and receive wr")
Link: https://lore.kernel.org/r/1575981902-5274-1-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Report the the data path MSIx vectors allocated by driver as number of
completion vectors. One interrupt vector is used for Control path. So
reporting one less than the total number of MSIx vectors allocated by the
driver.
Link: https://lore.kernel.org/r/1574671174-5064-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Some adapters need a fence Work Entry to handle retransmission. Currently
the driver checks for this condition, only if the Send queue entry is
signalled. Implement the condition check, irrespective of the signalled
state of the Work queue entries
Failure to add the fence can result in access to memory that is already
marked as completed, triggering data corruption, transmission failure,
IOMMU failures, etc.
Fixes: 9152e0b722 ("RDMA/bnxt_re: HW workarounds for handling specific conditions")
Link: https://lore.kernel.org/r/1574671174-5064-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HW/FW support two types of latency enhancement features. Until now
user-space implemented only edpm (enhanced dpm). We add kernel capability
flags to differentiate between current FW in kernel that supports both
ldpm and edpm. Since edpm is not yet supported for iWARP we add different
flags for iWARP + RoCE. We also fix bad practice of defining sizes in
rdma-core and pass initialization to kernel, for forward compatibility.
The capability flags are added for backward-forward compatibility between
kernel and rdma-core for qedr.
Before this change there was a field called dpm_enabled which could hold
either 0 or 1 value, this indicated whether RoCE edpm was enabled or
not. We modified this field to be dpm_flags, and bit 1 still holds the
same meaning of RoCE edpm being enabled or not.
Link: https://lore.kernel.org/r/20191121112957.25162-1-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- Update Steve Wise info
- Fix for soft-RoCE crc calculations (will break back compatibility, but
only with the soft-RoCE driver, which has had this bug since it was
introduced and it is an on-the-wire bug, but will make soft-RoCE fully
compatible with real RoCE hardware)
- cma init fixup
- counters oops fix
- fix for mlx4 init/teardown sequence
- fix for mkx5 steering rules
- introduce a cleanup API, which isn't a fix, but we want to use it in
the next fix
- fix for mlx5 memory management that uses API in previous patch
Signed-off-by: Doug Ledford <dledford@redhat.com>
-----BEGIN PGP SIGNATURE-----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=UNwD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"A small collection of -rc fixes. Mostly. One API addition, but that's
because we wanted to use it in a fix. There's also a bug fix that is
going to render the 5.5 kernel's soft-RoCE driver incompatible with
all soft-RoCE versions prior, but it's required to actually implement
the protocol according to the RoCE spec and required in order for the
soft-RoCE driver to be able to successfully work with actual RoCE
hardware.
Summary:
- Update Steve Wise info
- Fix for soft-RoCE crc calculations (will break back compatibility,
but only with the soft-RoCE driver, which has had this bug since it
was introduced and it is an on-the-wire bug, but will make
soft-RoCE fully compatible with real RoCE hardware)
- cma init fixup
- counters oops fix
- fix for mlx4 init/teardown sequence
- fix for mkx5 steering rules
- introduce a cleanup API, which isn't a fix, but we want to use it
in the next fix
- fix for mlx5 memory management that uses API in previous patch"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Fix device memory flows
IB/core: Introduce rdma_user_mmap_entry_insert_range() API
IB/mlx5: Fix steering rule of drop and count
IB/mlx4: Follow mirror sequence of device add during device removal
RDMA/counter: Prevent auto-binding a QP which are not tracked with res
rxe: correctly calculate iCRC for unaligned payloads
Update mailmap info for Steve Wise
RDMA/cma: add missed unregister_pernet_subsys in init failure
Fix device memory flows so that only once there will be no live mmaped
VA to a given allocation the matching object will be destroyed.
This prevents a potential scenario that existing VA that was mmaped by
one process might still be used post its deallocation despite that it's
owned now by other process.
The above is achieved by integrating with IB core APIs to manage
mmap/munmap. Only once the refcount will become 0 the DM object and its
underlay area will be freed.
Fixes: 3b113a1ec3 ("IB/mlx5: Support device memory type attribute")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191212100237.330654-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Introduce rdma_user_mmap_entry_insert_range() API to be used once the
required key for the given entry should be in a given range.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191212100237.330654-2-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
There are two flow rule destinations: QP and packet. While users are
setting DROP packet rule, the QP should not be set as a destination.
Fixes: 3b3233fbf0 ("IB/mlx5: Add flow counters binding support")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191212091214.315005-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Current code device add sequence is:
ib_register_device()
ib_mad_init()
init_sriov_init()
register_netdev_notifier()
Therefore, the remove sequence should be,
unregister_netdev_notifier()
close_sriov()
mad_cleanup()
ib_unregister_device()
However it is not above.
Hence, make do above remove sequence.
Fixes: fa417f7b52 ("IB/mlx4: Add support for IBoE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191212091214.315005-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
pat.h is a file whose main purpose is to provide the memtype_*() APIs.
PAT is the low level hardware mechanism - but the high level abstraction
is memtype.
So name the header <memtype.h> as well - this goes hand in hand with memtype.c
and memtype_interval.c.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If RoCE PDUs being sent or received contain pad bytes, then the iCRC
is miscalculated, resulting in PDUs being emitted by RXE with an incorrect
iCRC, as well as ingress PDUs being dropped due to erroneously detecting
a bad iCRC in the PDU. The fix is to include the pad bytes, if any,
in iCRC computations.
Note: This bug has caused broken on-the-wire compatibility with actual
hardware RoCE devices since the soft-RoCE driver was first put into the
mainstream kernel. Fixing it will create an incompatibility with the
original soft-RoCE devices, but is necessary to be compatible with real
hardware devices.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Steve Wise <larrystevenwise@gmail.com>
Link: https://lore.kernel.org/r/20191203020319.15036-2-larrystevenwise@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().
This patch is generated using following script:
EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"
git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do
if [[ "$file" =~ $EXCLUDE_FILES ]]; then
continue
fi
sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
The driver forgets to call unregister_pernet_subsys() in the error path
of cma_init().
Add the missed call to fix it.
Fixes: 4be74b42a6 ("IB/cma: Separate port allocation to network namespaces")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Link: https://lore.kernel.org/r/20191206012426.12744-1-hslester96@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
ipv6_stub uses the ip6_dst_lookup function to allow other modules to
perform IPv6 lookups. However, this function skips the XFRM layer
entirely.
All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the
ip_route_output_key and ip_route_output helpers) for their IPv4 lookups,
which calls xfrm_lookup_route(). This patch fixes this inconsistent
behavior by switching the stub to ip6_dst_lookup_flow, which also calls
xfrm_lookup_route().
This requires some changes in all the callers, as these two functions
take different arguments and have different return types.
Fixes: 5f81bd2e5d ("ipv6: export a stub for IPv6 symbols used by vxlan")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
This is another round of bug fixing and cleanup. This time the focus is on
the driver pattern to use mmu notifiers to monitor a VA range. This code
is lifted out of many drivers and hmm_mirror directly into the
mmu_notifier core and written using the best ideas from all the driver
implementations.
This removes many bugs from the drivers and has a very pleasing
diffstat. More drivers can still be converted, but that is for another
cycle.
- A shared branch with RDMA reworking the RDMA ODP implementation
- New mmu_interval_notifier API. This is focused on the use case of
monitoring a VA and simplifies the process for drivers
- A common seq-count locking scheme built into the mmu_interval_notifier
API usable by drivers that call get_user_pages() or hmm_range_fault()
with the VA range
- Conversion of mlx5 ODP, hfi1, radeon, nouveau, AMD GPU, and Xen GntDev
drivers to the new API. This deletes a lot of wonky driver code.
- Two improvements for hmm_range_fault(), from testing done by Ralph
-----BEGIN PGP SIGNATURE-----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=Hj8a
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This is another round of bug fixing and cleanup. This time the focus
is on the driver pattern to use mmu notifiers to monitor a VA range.
This code is lifted out of many drivers and hmm_mirror directly into
the mmu_notifier core and written using the best ideas from all the
driver implementations.
This removes many bugs from the drivers and has a very pleasing
diffstat. More drivers can still be converted, but that is for another
cycle.
- A shared branch with RDMA reworking the RDMA ODP implementation
- New mmu_interval_notifier API. This is focused on the use case of
monitoring a VA and simplifies the process for drivers
- A common seq-count locking scheme built into the
mmu_interval_notifier API usable by drivers that call
get_user_pages() or hmm_range_fault() with the VA range
- Conversion of mlx5 ODP, hfi1, radeon, nouveau, AMD GPU, and Xen
GntDev drivers to the new API. This deletes a lot of wonky driver
code.
- Two improvements for hmm_range_fault(), from testing done by Ralph"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
mm/hmm: remove hmm_range_dma_map and hmm_range_dma_unmap
mm/hmm: make full use of walk_page_range()
xen/gntdev: use mmu_interval_notifier_insert
mm/hmm: remove hmm_mirror and related
drm/amdgpu: Use mmu_interval_notifier instead of hmm_mirror
drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror
drm/amdgpu: Call find_vma under mmap_sem
nouveau: use mmu_interval_notifier instead of hmm_mirror
nouveau: use mmu_notifier directly for invalidate_range_start
drm/radeon: use mmu_interval_notifier_insert
RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv
RDMA/odp: Use mmu_interval_notifier_insert()
mm/hmm: define the pre-processor related parts of hmm.h even if disabled
mm/hmm: allow hmm_range to be used with a mmu_interval_notifier or hmm_mirror
mm/mmu_notifier: add an interval tree notifier
mm/mmu_notifier: define the header pre-processor parts even if disabled
mm/hmm: allow snapshot of the special zero page
Here is the "big" set of driver core patches for 5.5-rc1
There's a few minor cleanups and fixes in here, but the majority of the
patches in here fall into two buckets:
- debugfs api cleanups and fixes
- driver core device link support for boot dependancy issues
The debugfs api cleanups are working to slowly refactor the debugfs apis
so that it is even harder to use incorrectly. That work has been
happening for the past few kernel releases and will continue over time,
it's a long-term project/goal
The driver core device link support missed 5.4 by just a bit, so it's
been sitting and baking for many months now. It's from Saravana Kannan
to help resolve the problems that DT-based systems have at boot time
with dependancy graphs and kernel modules. Turns out that no one has
actually tried to build a generic arm64 kernel with loads of modules and
have it "just work" for a variety of platforms (like a distro kernel)
The big problem turned out to be a lack of depandancy information
between different areas of DT entries, and the work here resolves that
problem and now allows devices to boot properly, and quicker than a
monolith kernel.
All of these patches have been in linux-next for a long time with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6m6Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yntJQCcCqg6RQ7LTdHuZv1ETeefXlsfk00An1Jtean6
42bWGx52bGFvAcpjWy8R
=P7hq
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 5.5-rc1
There's a few minor cleanups and fixes in here, but the majority of
the patches in here fall into two buckets:
- debugfs api cleanups and fixes
- driver core device link support for boot dependancy issues
The debugfs api cleanups are working to slowly refactor the debugfs
apis so that it is even harder to use incorrectly. That work has been
happening for the past few kernel releases and will continue over
time, it's a long-term project/goal
The driver core device link support missed 5.4 by just a bit, so it's
been sitting and baking for many months now. It's from Saravana Kannan
to help resolve the problems that DT-based systems have at boot time
with dependancy graphs and kernel modules. Turns out that no one has
actually tried to build a generic arm64 kernel with loads of modules
and have it "just work" for a variety of platforms (like a distro
kernel). The big problem turned out to be a lack of dependency
information between different areas of DT entries, and the work here
resolves that problem and now allows devices to boot properly, and
quicker than a monolith kernel.
All of these patches have been in linux-next for a long time with no
reported issues"
* tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits)
tracing: Remove unnecessary DEBUG_FS dependency
of: property: Add device link support for interrupt-parent, dmas and -gpio(s)
debugfs: Fix !DEBUG_FS debugfs_create_automount
of: property: Add device link support for "iommu-map"
of: property: Fix the semantics of of_is_ancestor_of()
i2c: of: Populate fwnode in of_i2c_get_board_info()
drivers: base: Fix Kconfig indentation
firmware_loader: Fix labels with comma for builtin firmware
driver core: Allow device link operations inside sync_state()
driver core: platform: Declare ret variable only once
cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h>
crypto: hisilicon: no need to check return value of debugfs_create functions
driver core: platform: use the correct callback type for bus_find_device
firmware_class: make firmware caching configurable
driver core: Clarify documentation for fwnode_operations.add_links()
mailbox: tegra: Fix superfluous IRQ error message
net: caif: Fix debugfs on 64-bit platforms
mac80211: Use debugfs_create_xul() helper
media: c8sectpfe: no need to check return value of debugfs_create functions
of: property: Add device link support for iommus, mboxes and io-channels
...
Mainly a collection of smaller of driver updates this cycle.
- Various driver updates and bug fixes for siw, bnxt_re, hns, qedr,
iw_cxgb4, vmw_pvrdma, mlx5
- Improvements in SRPT from working with iWarp
- SRIOV VF support for bnxt_re
- Skeleton kernel-doc files for drivers/infiniband
- User visible counters for events related to ODP
- Common code for tracking of mmap lifetimes so that drivers can link HW
object liftime to a VMA
- ODP bug fixes and rework
- RDMA READ support for efa
- Removal of the very old cxgb3 driver
-----BEGIN PGP SIGNATURE-----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=UV2u
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Again another fairly quiet cycle with few notable core code changes
and the usual variety of driver bug fixes and small improvements.
- Various driver updates and bug fixes for siw, bnxt_re, hns, qedr,
iw_cxgb4, vmw_pvrdma, mlx5
- Improvements in SRPT from working with iWarp
- SRIOV VF support for bnxt_re
- Skeleton kernel-doc files for drivers/infiniband
- User visible counters for events related to ODP
- Common code for tracking of mmap lifetimes so that drivers can link
HW object liftime to a VMA
- ODP bug fixes and rework
- RDMA READ support for efa
- Removal of the very old cxgb3 driver"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (168 commits)
RDMA/hns: Delete unnecessary callback functions for cq
RDMA/hns: Rename the functions used inside creating cq
RDMA/hns: Redefine the member of hns_roce_cq struct
RDMA/hns: Redefine interfaces used in creating cq
RDMA/efa: Expose RDMA read related attributes
RDMA/efa: Support remote read access in MR registration
RDMA/efa: Store network attributes in device attributes
IB/hfi1: remove redundant assignment to variable ret
RDMA/bnxt_re: Fix missing le16_to_cpu
RDMA/bnxt_re: Fix stat push into dma buffer on gen p5 devices
RDMA/bnxt_re: Fix chip number validation Broadcom's Gen P5 series
RDMA/bnxt_re: Fix Kconfig indentation
IB/mlx5: Implement callbacks for getting VFs GUID attributes
IB/ipoib: Add ndo operation for getting VFs GUID attributes
IB/core: Add interfaces to get VF node and port GUIDs
net/core: Add support for getting VF GUIDs
RDMA/qedr: Fix null-pointer dereference when calling rdma_user_mmap_get_offset
RDMA/cm: Use refcount_t type for refcount variable
IB/mlx5: Support extended number of strides for Striding RQ
IB/mlx4: Update HW GID table while adding vlan GID
...
Rework event_create_dir() to use an array of static data instead of
function pointers where possible.
The problem is that it would call the function pointer on module load
before parse_args(), possibly even before jump_labels were initialized.
Luckily the generated functions don't use jump_labels but it still seems
fragile. It also gets in the way of changing when we make the module map
executable.
The generated function are basically calling trace_define_field() with a
bunch of static arguments. So instead of a function, capture these
arguments in a static array, avoiding the function call.
Now there are a number of cases where the fields are dynamic (syscall
arguments, kprobes and uprobes), in which case a static array does not
work, for these we preserve the function call. Luckily all these cases
are not related to modules and so we can retain the function call for
them.
Also fix up all broken tracepoint definitions that now generate a
compile error.
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191111132458.342979914@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, when cq event occurred, we first call our own callback
functions in the event process function, then call ib callback
functions. Actually, we can directly call ib callback functions.
Link: https://lore.kernel.org/r/1574044493-46984-5-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current names of functions are not proper, such as hns_roce_free_cq,
actually it means free cqc, thus we rename them. Furthermore, functions
used inside one file can be named without the prefix hns_roce_ which will
make the functions for verbs symbols more eye-catching.
Link: https://lore.kernel.org/r/1574044493-46984-4-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to package buf and mtt into hns_roce_cq_buf, which will
make code more complex, just delete this struct and move buf and mtt into
hns_roce_cq. Furthermore, we add size member for hns_roce_buf to avoid
repeatly calculating where needed it.
Link: https://lore.kernel.org/r/1574044493-46984-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Some interfaces defined with unnecessary input parameters, such as "nent"
and "vector". This patch redefined these interfaces to make the code more
readable and simple.
Link: https://lore.kernel.org/r/1574044493-46984-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Query the device attributes for RDMA operations, including maximum
transfer size and maximum number of SGEs per RDMA WR, and report them
back to the userspace library.
Link: https://lore.kernel.org/r/20191121141509.59297-4-galpress@amazon.com
Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Enable remote read access for memory regions in order to support RDMA
operations.
Link: https://lore.kernel.org/r/20191121141509.59297-3-galpress@amazon.com
Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There's no reason to separate the network attributes from all other
device attributes. Embed the fields inside the device attributes and
query them all in one function.
Link: https://lore.kernel.org/r/20191121141509.59297-2-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The variable ret is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Link: https://lore.kernel.org/r/20191122154814.87257-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Due to recent advances in the firmware for Broadcom's gen p5 series of
adaptors the driver code to report hardware counters has been broken
w.r.t. roce devices.
The new firmware command expects dma length to be specified during stat
dma buffer allocation.
Fixes: 2792b5b95e ("bnxt_en: Update firmware interface spec. to 1.10.0.89.")
Link: https://lore.kernel.org/r/1574317343-23300-3-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the first version of Gen P5 ASIC, chip-id was always set to 0x1750 for
all adaptor port configurations. This has been fixed in the new chip rev.
Due to this missing fix users are not able to use adaptors based on latest
chip rev of Broadcom's Gen P5 adaptors.
Fixes: ae8637e131 ("RDMA/bnxt_re: Add chip context to identify 57500 series")
Link: https://lore.kernel.org/r/1574317343-23300-2-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Luke Starrett <luke.starrett@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adjust indentation from spaces to tab (+optional two spaces) as in coding
style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Link: https://lore.kernel.org/r/20191120134138.15245-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Danit Goldberg says:
====================
This series extends RTNETLINK to provide IB port and node GUIDs, which
were configured for Infiniband VFs.
The functionality to set VF GUIDs already existed for a long time, and
here we are adding the missing "get" so that netlink will be symmetric and
various cloud orchestration tools will be able to manage such VFs more
naturally.
The iproute2 was extended too to present those GUIDs.
- ip link show <device>
For example:
- ip link set ib4 vf 0 node_guid 22:44:33:00:33:11:00:33
- ip link set ib4 vf 0 port_guid 10:21:33:12:00:11:22:10
- ip link show ib4
ib4: <BROADCAST,MULTICAST> mtu 4092 qdisc noop state DOWN mode DEFAULT group default qlen 256
link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff,
spoof checking off, NODE_GUID 22:44:33:00:33:11:00:33, PORT_GUID 10:21:33:12:00:11:22:10, link-state disable, trust off, query_rss off
====================
Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies
* branch 'ib-guids': (35 commits)
IB/mlx5: Implement callbacks for getting VFs GUID attributes
IB/ipoib: Add ndo operation for getting VFs GUID attributes
IB/core: Add interfaces to get VF node and port GUIDs
net/core: Add support for getting VF GUIDs
net/mlx5: Add new chain for netfilter flow table offload
net/mlx5: Refactor creating fast path prio chains
net/mlx5: Accumulate levels for chains prio namespaces
net/mlx5: Define fdb tc levels per prio
net/mlx5: Rename FDB_* tc related defines to FDB_TC_* defines
net/mlx5: Simplify fdb chain and prio eswitch defines
IB/mlx5: Load profile according to RoCE enablement state
IB/mlx5: Rename profile and init methods
net/mlx5: Handle "enable_roce" devlink param
net/mlx5: Document flow_steering_mode devlink param
devlink: Add new "enable_roce" generic device param
net/mlx5: fix spelling mistake "metdata" -> "metadata"
net/mlx5: fix kvfree of uninitialized pointer spec
IB/mlx5: Introduce and use mlx5_core_is_vf()
net/mlx5: E-switch, Enable metadata on own vport
net/mlx5: Refactor ingress acl configuration
...
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This converts one of the two users of mmu_notifiers to use the new API.
The conversion is fairly straightforward, however the existing use of
notifiers here seems to be racey.
Link: https://lore.kernel.org/r/20191112202231.3856-7-jgg@ziepe.ca
Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Replace the internal interval tree based mmu notifier with the new common
mmu_interval_notifier_insert() API. This removes a lot of code and fixes a
deadlock that can be triggered in ODP:
zap_page_range()
mmu_notifier_invalidate_range_start()
[..]
ib_umem_notifier_invalidate_range_start()
down_read(&per_mm->umem_rwsem)
unmap_single_vma()
[..]
__split_huge_page_pmd()
mmu_notifier_invalidate_range_start()
[..]
ib_umem_notifier_invalidate_range_start()
down_read(&per_mm->umem_rwsem) // DEADLOCK
mmu_notifier_invalidate_range_end()
up_read(&per_mm->umem_rwsem)
mmu_notifier_invalidate_range_end()
up_read(&per_mm->umem_rwsem)
The umem_rwsem is held across the range_start/end as the ODP algorithm for
invalidate_range_end cannot tolerate changes to the interval
tree. However, due to the nested invalidation regions the second
down_read() can deadlock if there are competing writers. The new core code
provides an alternative scheme to solve this problem.
Fixes: ca748c39ea ("RDMA/umem: Get rid of per_mm->notifier_count")
Link: https://lore.kernel.org/r/20191112202231.3856-6-jgg@ziepe.ca
Tested-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rhashtable_lookup_fast() internally calls rcu_read_lock() then,
calls rhashtable_lookup(). So if rcu_read_lock() is already held,
rhashtable_lookup() is enough.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Implement the IB defined callback mlx5_ib_get_vf_guid used to query FW
for VFs attributes and return node and port GUIDs.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add ndo operation to the network driver that enables configuring
ipoib_get_vf_guid operation. The operation allows to get a VF port
and node GUIDs.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Provide ability to get node and port GUIDs of VFs to be symmetrical
to already existing set option.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
When running against rdma-core that doesn't support doorbell recovery, the
rdma_user_mmap_entry won't be allocated for doorbell recovery related
mappings.
We have a flag indicating whether rdma-core supports doorbell recovery or
not which was used during initialization, however some cases didn't check
that the rdma_user_mmap_entry exists before attempting to acquire it's
offset.
Fixes: 97f6125092 ("RDMA/qedr: Add doorbell overflow recovery support")
Link: https://lore.kernel.org/r/20191118150645.26602-1-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This atomic in struct cm_id_private is being used as a refcount, change it
to refcount_t for better clarity and to get the refcount protections.
Link: https://lore.kernel.org/r/1573997601-4502-1-git-send-email-danitg@mellanox.com
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extends the minimum single WQE strides from 64 to 8, which is exposed
by the "min_single_wqe_log_num_of_strides" field of striding_rq_caps.
Choose right number of strides based on FW capability.
Link: https://lore.kernel.org/r/20191115154555.247856-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When adding a new GID compare the vlan along with the GID and type. This
allows vlan's to have GIDs that alias each other, such as the default
GID. Otherwise they the GID cache view can become inconsistent with the HW
view.
Link: https://lore.kernel.org/r/20191115154457.247763-1-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The cma is currently using a hard-coded value, CMA_IBOE_PACKET_LIFETIME,
for the PacketLifeTime, as it can not be determined from the network.
This value might not be optimal for all networks.
The cma module supports the function rdma_set_ack_timeout to set the ACK
timeout for a QP associated with a connection. As per IBTA 12.7.34 local
ACK timeout = (2 * PacketLifeTime + Local CA’s ACK delay). Assuming a
negligible local ACK delay, we can use PacketLifeTime = local ACK
timeout/2 as a reasonable approximation for RoCE networks.
Link: https://lore.kernel.org/r/1572439440-17416-1-git-send-email-dag.moxnes@oracle.com
Signed-off-by: Dag Moxnes <dag.moxnes@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The argument is always ignored, so remove it.
Link: https://lore.kernel.org/r/20191113073214.9514-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This flag is not implemented by any backend and only set by the ib_umem
module in a single instance.
Link: https://lore.kernel.org/r/20191113073214.9514-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We cannot rely on the entry memcpy as we only copy the actual size of the
command, the rest of the bytes must be memset to zero.
Currently providing non-zero memory will not have any user visible impact.
However, since admin commands are extendable (in a backwards compatible
way) everything beyond the size of the command must be cleared to prevent
issues in the future.
Fixes: 0420e54256 ("RDMA/efa: Implement functions that submit and complete admin commands")
Link: https://lore.kernel.org/r/20191112092608.46964-1-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Removes obsolete driver specific mmap information after
generalization of RDMA driver mmap service. Also removes
useless forward declaration of struct siw_mr.
Fixes: 11f1a75567 ("RDMA/siw: Use the common mmap_xa helpers")
Link: https://lore.kernel.org/r/20191113153404.7402-1-bmt@zurich.ibm.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The function qedr_iw_load_qp() is only used in qedr_iw_cm.c
Fixes: 82af6d19d8 ("RDMA/qedr: Fix synchronization methods and memory leaks in qedr")
Link: https://lore.kernel.org/r/20191110113645.20058-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a spelling mistake in the variable nak_invalid_requst_errors,
rename it to nak_invalid_request_errors.
Link: https://lore.kernel.org/r/20191107224855.417647-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The permissions of the read-only or write-only sysfs files can be
changed (as root) and the user can then try to read a write-only file or
write to a read-only file which will lead to kernel crash here.
Protect against that by always validating the show/store callbacks.
Link: https://lore.kernel.org/r/d45cc26361a174ae12dbb86c994ef334d257924b.1573096807.git.viresh.kumar@linaro.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move the release operation after error log to avoid possible use after
free.
Link: https://lore.kernel.org/r/1573021434-18768-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
1) New generic devlink param "enable_roce", for downstream devlink
reload support
2) Do vport ACL configuration on per vport basis when
enabling/disabling a vport. This enables to have vports enabled/disabled
outside of eswitch config for future
3) Split the code for legacy vs offloads mode and make it clear
4) Tide up vport locking and workqueue usage
5) Fix metadata enablement for ECPF
6) Make explicit use of VF property to publish IB_DEVICE_VIRTUAL_FUNCTION
7) E-Switch and flow steering core low level support and refactoring for
netfilter flowtables offload
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The code added by this patch is similar to the code that already exists in
ibmvscsis_determine_resid(). This patch has been tested by running the
following command:
strace sg_raw -r 1k /dev/sdb 12 00 00 00 60 00 -o inquiry.bin |&
grep resid=
Link: https://lore.kernel.org/r/20191105214632.183302-1-bvanassche@acm.org
Fixes: a42d985bd5 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support for flow steering counters action with a non-base counter
ID (offset) for bulk counters.
When creating a flow counter object, save the bulk value. This value is
used when a flow action with a non-base counter ID is requested - to
validate that the required offset is in the range of the allocated bulk.
Link: https://lore.kernel.org/r/20191103140723.77411-1-leon@kernel.org
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All users of process_mad() converts input pointers from ib_mad_hdr to be
ib_mad, update the function declaration to use ib_mad directly.
Also remove not used input MAD size parameter.
Link: https://lore.kernel.org/r/20191029062745.7932-17-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-By: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All callers allocate MAD structures with proper sizes, there is no need to
recheck it.
Link: https://lore.kernel.org/r/20191029062745.7932-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When RoCE is disabled load mlx5_ib in raw_eth profile.
Clean pf_profile roce capability checks as it will not be used without
roce capability.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Rename uplink_rep_profile and its unique init and cleanup stages to
suit its upcoming use as the profile when RoCE is disabled.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Modify some printings that is not in uniformed style, non-standard or with
spelling errors.
Link: https://lore.kernel.org/r/1572952082-6681-10-git-send-email-liweihang@hisilicon.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It is better to return a linux error code than define a private constant.
Link: https://lore.kernel.org/r/1572952082-6681-9-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Merge base configuration of hr_dev into hns_roce_hw_v2_get_cfg(). In
addition, there is no need to return 0 at last, so we change return type
of it to void.
Link: https://lore.kernel.org/r/1572952082-6681-8-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use wqe_cnt instead of max which means the queue size of srq, and remove
wqe_ctr which is not used.
Link: https://lore.kernel.org/r/1572952082-6681-5-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The uar information is already recorded in priv_uar of hns_roce_dev, there
is no need to record it in hns_roce_cq again.
Link: https://lore.kernel.org/r/1572952082-6681-4-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Special QP have no differences with normal qp in data structure, so
definition of struct hns_roce_sqp should be removed and replaced by struct
hns_roce_qp.
Link: https://lore.kernel.org/r/1572952082-6681-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Multiple "if"s and "||" make extension of process_mad() function
as a tedious task, rewrite that function to be more readable.
Link: https://lore.kernel.org/r/20191029062745.7932-14-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Change the switch with one case into a simple if statement so the code is
less confusing.
Link: https://lore.kernel.org/r/20191029062745.7932-12-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All callers for process_mad allocate MAD structures with proper sizes,
there is no need to recheck it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This function always returns 0, so just use void and remove the bogus
checking at the only call site.
Link: https://lore.kernel.org/r/20191029062745.7932-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ensure that MAD output buffer is zero-based allocated in all the callers
of process_mad and remove the various memset()'s from the drivers.
Link: https://lore.kernel.org/r/20191029062745.7932-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Trivial cleanup to fix the following warning:
drivers/infiniband/hw/qib/qib_iba6120.c:1420: warning: bad line:
Fixes: f931551baf ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Link: https://lore.kernel.org/r/20191029062745.7932-15-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Although the mentioned patch fixes a use-after-free bug, it introduces a
hang during shutdown. Since the latter is worse, revert this patch.
Link: https://lore.kernel.org/r/20191101204756.182162-1-bvanassche@acm.org
Reported-by: Honggang Li <honli@redhat.com>
Fixes: 9b64f7d0bb ("RDMA/srpt: Postpone HCA removal until after configfs directory removal")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
srq_desc_size should be rounded up to pow of two before used, or related
calculation may cause allocating wrong size of memory for srq buffer.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1572575610-52530-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Size of pointer to buf field of struct hns_roce_hem_chunk should be
considered when calculating HNS_ROCE_HEM_CHUNK_LEN, or sg table size will
be larger than expected when allocating hem.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/1572575610-52530-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Sirong Wang <wangsirong@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to return always zero for function which is not
supported.
Fixes: ac1b36e55a ("qedr: Add support for user context verbs")
Link: https://lore.kernel.org/r/20191028155931.1114-5-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to return always zero for function which is not
supported.
Fixes: fe2caefcdf ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter")
Link: https://lore.kernel.org/r/20191028155931.1114-4-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to return always zero for function which is not
supported.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20191028155931.1114-3-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Improve return code from ib_modify_port() by doing the following:
- Use "-EOPNOTSUPP" instead "-ENOSYS" which is the proper return code
- Allow only fake IB_PORT_CM_SUP manipulation for RoCE providers that
didn't implement the modify_port callback, otherwise return
"-EOPNOTSUPP"
Fixes: 61e0962d52 ("IB: Avoid ib_modify_port() failure for RoCE devices")
Link: https://lore.kernel.org/r/20191028155931.1114-2-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Normal RDMA WRITE request never returns IB_WC_RNR_RETRY_EXC_ERR to ULPs
because it does not need post receive buffer on the responder side.
Consequently, as an enhancement to normal RDMA WRITE request inside the
hfi1 driver, TID RDMA WRITE request should not return such an error status
to ULPs, although it does receive RNR NAKs from the responder when TID
resources are not available. This behavior is violated when
qp->s_rnr_retry_cnt is set in current hfi1 implementation.
This patch enforces these semantics by avoiding any reaction to the updates
of the RNR QP attributes.
Fixes: 3c6cb20a0d ("IB/hfi1: Add TID RDMA WRITE functionality into RDMA verbs")
Link: https://lore.kernel.org/r/20191025195842.106825.71532.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For a TID RDMA WRITE request, a QP on the responder side could be put into
a queue when a hardware flow is not available. A RNR NAK will be returned
to the requester with a RNR timeout value based on the position of the QP
in the queue. The tid_rdma_flow_wt variable is used to calculate the
timeout value and is determined by using a MTU of 4096 at the module
loading time. This could reduce the timeout value by half from the desired
value, leading to excessive RNR retries.
This patch fixes the issue by calculating the flow weight with the real
MTU assigned to the QP.
Fixes: 07b923701e ("IB/hfi1: Add functions to receive TID RDMA WRITE request")
Link: https://lore.kernel.org/r/20191025195836.106825.77769.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If an hfi1 card is inserted in a Gen4 systems, the driver will avoid the
gen3 speed bump and the card will operate at half speed.
This is because the driver avoids the gen3 speed bump when the parent bus
speed isn't identical to gen3, 8.0GT/s. This is not compatible with gen4
and newer speeds.
Fix by relaxing the test to explicitly look for the lower capability
speeds which inherently allows for gen4 and all future speeds.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20191101192059.106248.1699.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: James Erwin <james.erwin@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds the iWARP specific doorbells to the doorbell recovery
mechanism.
Link: https://lore.kernel.org/r/20191030094417.16866-9-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use the doorbell recovery mechanism to register rdma related doorbells
that will be restored in case there is a doorbell overflow attention.
Link: https://lore.kernel.org/r/20191030094417.16866-8-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove all functions related to mmap from qedr and use the common API.
Link: https://lore.kernel.org/r/20191030094417.16866-7-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the functions related to managing the mmap_xa database. This code
is now common in ib_core.
Link: https://lore.kernel.org/r/20191030094417.16866-6-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Tested-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the functions related to managing the mmap_xa database. This code
was replaced with common code in ib_core.
Link: https://lore.kernel.org/r/20191030094417.16866-5-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
