According to latest AM65x Data Manual[1], a different output tap delay
value is recommended for all speed modes. Therefore, replace the
ti,otap-del-sel binding with one ti,otap-del-sel- for each MMC/SD speed
mode.
[1] http://www.ti.com/lit/gpn/am6526
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Link: https://lore.kernel.org/r/20200108150920.14547-2-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To support the sdr104 mode, the sdmmc variant has a hardware delay block to
manage the clock phase when sampling data received by the card.
This patch adds a second base register (optional) for sdmmc delay block.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200128090636.13689-6-ludovic.barre@st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert the jz4740-rtc doc to YAML, and update it to reflect the new
changes in the driver:
- More compatible strings are specified, with fallbacks if needed,
- The vendor-specific properties are now properly prefixed with the
'ingenic,' prefix.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200311182318.22154-3-paul@crapouillou.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
As described above single-output clock provider should have
0 cells number, so let's fix it by using 0 as cells number.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Rob Herring <robh@kernel.org>
ENE Technology makes embedded controllers and perhaps other stuff. Their
web site is http://www.ene.com.tw/.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>
Dell makes computers and perhaps other stuff. Their web site is
http://www.dell.com/.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>
"SG Micro Corp (SGMICRO) specializes in high performance, high quality
analog IC design, marketing and sales." (http://www.sg-micro.com/)
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Rob Herring <robh@kernel.org>
Hello,
This small series adds audio route for built-in microphone on NVIDIA Tegra
boards that use WM8903 CODEC. In particular this is needed in order to unmute
internal microphone on Acer A500 tablet device. I'm planning to send out the
device tree for the A500 for 5.8, so will be nice to get the microphone
sorted out. Please review and apply, thanks in advance.
Dmitry Osipenko (2):
dt-bindings: sound: tegra-wm8903: Document built-in microphone audio
source
ASoC: tegra: tegra_wm8903: Support DAPM events for built-in microphone
.../sound/nvidia,tegra-audio-wm8903.txt | 1 +
sound/soc/tegra/tegra_wm8903.c | 18 ++++++++++++++++++
2 files changed, 19 insertions(+)
--
2.25.1
The internal microphone source is needed in order to be able to describe
the hardware audio routing for devices that have the built-in microphone
in addition to the external Mic Jack.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200320205504.30466-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the serial slave-device Device Tree binding documentation to
json-schema, and incorporate it into the generic serial bindings.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the generic serial interface Device Tree binding documentation
to json-schema.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Pull ARM cpufreq drivers updates for v5.7 from Viresh Kumar:
"This pull request contains:
- update to imx cpufreq drivers to improve their support (Anson Huang,
Christoph Niedermaier, and Peng Fan).
- Update to qcom cpufreq to support other krait based SoCs (Ansuel
Smith).
- Update ti cpufreq driver to support OPP_PLUS (Lokesh Vutla).
- Update cpufreq-dt driver to allow platfoem specific intermediate
callbacks (Peng Fan)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom: Add support for krait based socs
cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
cpufreq: dt: Allow platform specific intermediate callbacks
cpufreq: imx-cpufreq-dt: Correct i.MX8MP's market segment fuse location
cpufreq: imx6q: read OCOTP through nvmem for imx6q
cpufreq: imx6q: fix error handling
cpufreq: imx-cpufreq-dt: Add "cpu-supply" property check
cpufreq: ti-cpufreq: Add support for OPP_PLUS
cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL
*) Rename and Re-design phy-cadence-dp driver to phy-cadence-torrent driver
*) Add new PHY driver for Qualcomm 28nm Hi-Speed USB PHY
*) Add new PHY driver for Qualcomm Super Speed PHY in QCS404
*) Add support for Qualcomm PCIe QMP/QHP PHY in SDM845 to phy-qcom-qmp driver
*) Add support for Qualcomm UFS PHY in MSM8996 to phy-qcom-qmp driver
*) Add support for an additional reference clock in Mediatek phy-mtk-tphy driver
*) Add support for configuring tuning parameters in Mediatek phy-mtk-tphy driver
*) Add support for GMII PHY in TI K3 AM654x/J721E SoCs to phy-gmii-sel driver
*) Add support for USB2 PHY in Amlogic A1 SoC Family to phy-meson-g12a-usb2
driver
*) Add support for USB3/USB2/PCIe PHY in Socionext Pro5 SoC to
phy-uniphier-usb3ss/phy-uniphier-usb3hs/phy-uniphier-pcie driver respectively
*) Add support for QUSB2 PHY in Qualcomm SC7180 in driver
*) Convert dt-bindings of Cadence DP, Qualcomm QUSB2 to YAML format
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----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=+CzV
-----END PGP SIGNATURE-----
Merge tag 'phy-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
phy: for 5.7
*) Rename and Re-design phy-cadence-dp driver to phy-cadence-torrent driver
*) Add new PHY driver for Qualcomm 28nm Hi-Speed USB PHY
*) Add new PHY driver for Qualcomm Super Speed PHY in QCS404
*) Add support for Qualcomm PCIe QMP/QHP PHY in SDM845 to phy-qcom-qmp driver
*) Add support for Qualcomm UFS PHY in MSM8996 to phy-qcom-qmp driver
*) Add support for an additional reference clock in Mediatek phy-mtk-tphy driver
*) Add support for configuring tuning parameters in Mediatek phy-mtk-tphy driver
*) Add support for GMII PHY in TI K3 AM654x/J721E SoCs to phy-gmii-sel driver
*) Add support for USB2 PHY in Amlogic A1 SoC Family to phy-meson-g12a-usb2
driver
*) Add support for USB3/USB2/PCIe PHY in Socionext Pro5 SoC to
phy-uniphier-usb3ss/phy-uniphier-usb3hs/phy-uniphier-pcie driver respectively
*) Add support for QUSB2 PHY in Qualcomm SC7180 in driver
*) Convert dt-bindings of Cadence DP, Qualcomm QUSB2 to YAML format
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* tag 'phy-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (52 commits)
phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY
phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY
dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters
phy: qcom-qusb2: Add generic QUSB2 V2 PHY support
dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180
dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml
phy: rk-inno-usb2: Decrease verbosity of repeating log.
phy: amlogic: Add Amlogic A1 USB2 PHY Driver
dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings
phy: ti: gmii-sel: add support for am654x/j721e soc
dt-bindings: phy: ti: gmii-sel: add support for am654x/j721e soc
phy: qualcomm: usb: Add SuperSpeed PHY driver
dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver
dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding
dt-bindings: phy: remove qcom-dwc3-usb-phy
phy: phy-mtk-tphy: add a new reference clock
phy: phy-mtk-tphy: remove unused u3phya_ref clock
phy: phy-mtk-tphy: make the ref clock optional
phy: phy-mtk-tphy: add a property for internal resistance
...
Adds new coresight-cti.yaml file describing the bindings required to define
CTI in the device trees.
Adds an include file to dt-bindings/arm to define constants describing
common signal functionality used in CoreSight and generic usage.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This binding describes the PMUs that are found on MMP3 as well. Add the
compatible strings and adjust the description.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200309194254.29009-7-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the fixed-factor-clock binding to DT schema format using
json-schema.
While at that, fix a couple of small errors: make the file base name
match the compatible string, add an example and document the reg-names
property.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200309194254.29009-4-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The ICST clocks used in the ARM Integrator, Versatile and
RealView platforms are updated to use YAML schema, and two
new ICST clocks used by the Integrator IM-PD1 logical module
are added in the process.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lkml.kernel.org/r/20200219103326.81120-1-linus.walleij@linaro.org
[sboyd@kernel.org: Fix some typos]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Modem Subsystem clock provider have a bunch of generic properties
that are needed in a device tree. Add a YAML schemas for those.
Add clock ids for GCC MSS and MSS clocks which are required to bring
the modem out of reset.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/1584596131-22741-2-git-send-email-tdas@codeaurora.org
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert display/msm/gmu.txt to display/msm/gmu.yaml and remove the old
text bindings. The 'sram' text from the old binding never applied to
the GMU so it was not converted but all the other properties were correct.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add support for overriding QUSB2 V2 phy tuning parameters
in device tree bindings.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add compatibles for generic QUSB2 V2 phy which can be used for
sdm845 and sc7180.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Convert QUSB2 phy bindings to DT schema format using json-schema.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add the Amlogic A1 Family USB2 PHY Bindings
It supports Host mode only.
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
TI AM654x/J721E SoCs have the same PHY interface selection mechanism for
CPSWx subsystem as TI SoCs (AM3/4/5/DRA7), but registers and bit-fields
placement is different.
This patch adds corresponding compatible strings to enable support for TI
AM654x/J721E SoCs.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Binding description for Qualcomm's Synopsys 1.0.0 SuperSpeed PHY. This PHY
appears in a number of SoCs on various flavors of 20nm and 28nm nodes.
This commit adds information related to the 28nm node only.
Based on Sriharsha Allenki's <sallenki@codeaurora.org> original
definitions.
[bod: converted to yaml format]
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This binding is not used by any driver.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add three required properties about the address mapping, including
'#address-cells', '#size-cells' and 'ranges'
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Usually the digital and analog phys use the same reference clock,
but on some platforms, they are separated, so add another optional
clock to support it.
In order to keep the clock names consistent with PHY IP's, use
the da_ref for analog phy and ref clock for digital phy.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The u3phya_ref clock is already moved into sub-node, and
renamed as ref clock, no used anymore now, so remove it
to avoid confusion
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Make the ref clock optional, then we no need refer to a fixed-clock
in DTS anymore when the clock of USB3 PHY comes from oscillator
directly
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add two optional properties, one for tuning J-K voltage by INTR,
another for disconnect threshold, both of them are related with
connect detection
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This adds compatible string for Pro5 SoC that needs to manage gio clock
and reset. And Pro4 SoC uses USB2 PHY instead of USB3 HS-PHY, so this
removes Pro4 description from usb3-hsphy.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The support for the 14nm MSM8996 UFS PHY is currently handled by the
UFS-specific 14nm QMP driver, due to the earlier need for additional
operations beyond the standard PHY API.
Add support for this PHY to the common QMP driver, to allow us to remove
the old driver.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
- Add Cadence MHDP PHY bindings in YAML format.
- Add Torrent PHY reference clock bindings.
- Add sub-node bindings for each group of PHY lanes based on PHY type.
Each sub-node includes properties such as master lane number, link reset,
phy type, number of lanes etc.
- Add reset support including PHY reset and individual lane reset.
- Add a new compatible string used for TI SoCs using Torrent PHY.
This will not affect ABI as the driver has never been functional,
and therefore do not exist in any active use case.
Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Here is a pull request with interconnect changes for the 5.7-rc1 merge
window. It contains just driver updates, and these are:
- Refactoring of the SDM845 driver, which is now improved to better
represent the hardware.
- New driver for SC7180 platforms.
- New driver for OSM L3 interconnect hardware found on SDM845/SC7180
platforms.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
-----BEGIN PGP SIGNATURE-----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=jHM0
-----END PGP SIGNATURE-----
Merge tag 'icc-5.7-rc1' of https://git.linaro.org/people/georgi.djakov/linux into char-misc-next
Georgi writes:
interconnect changes for 5.7
Here is a pull request with interconnect changes for the 5.7-rc1 merge
window. It contains just driver updates, and these are:
- Refactoring of the SDM845 driver, which is now improved to better
represent the hardware.
- New driver for SC7180 platforms.
- New driver for OSM L3 interconnect hardware found on SDM845/SC7180
platforms.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.7-rc1' of https://git.linaro.org/people/georgi.djakov/linux:
interconnect: qcom: Add OSM L3 support on SC7180
dt-bindings: interconnect: Add OSM L3 DT binding on SC7180
interconnect: qcom: Add OSM L3 interconnect provider support
dt-bindings: interconnect: Add OSM L3 DT bindings
interconnect: qcom: Allow icc node to be used across icc providers
interconnect: qcom: Add SC7180 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings
interconnect: qcom: sdm845: Split qnodes into their respective NoCs
interconnect: qcom: Consolidate interconnect RPMh support
dt-bindings: interconnect: Update Qualcomm SDM845 DT bindings
dt-bindings: interconnect: Add YAML schemas for QCOM bcm-voter
dt-bindings: interconnect: Convert qcom,sdm845 to DT schema
Cooling-maps doesn't have to be a required property because there may
be no cooling device on system, or there are no enough cooling devices for
each thermal zone in multiple thermal zone cases since cooling devices
can't be shared.
So make this property optional to remove such limitations.
For thermal zones with no cooling-maps, there could be critic trips
that can trigger CPU reset or shutdown. So they still can take actions.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200309045411.21859-1-andy.tang@nxp.com
There's no need to specify 'maxItems' with the same value as the number
of entries in 'items'. A meta-schema update will catch future cases.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200313214552.845-2-robh@kernel.org
There's no need to specify 'maxItems' with the same value as the number
of entries in 'items'. A meta-schema update will catch future cases.
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200313214552.845-1-robh@kernel.org
Include Cadence core DT schema and define the Cadence platform DT schema
for both Host and Endpoint mode. Note: The Cadence core DT schema could
be included for other platforms using Cadence PCIe core.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add PCIe Host (RC) and Endpoint (EP) device tree schema for Cadence
PCIe core library. Platforms using Cadence PCIe core can include the
schemas added here in the platform specific schemas.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Define a common schema for PCI Endpoint Controllers.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Johan Hedberg says:
====================
pull request: bluetooth-next 2020-03-19
Here's the main bluetooth-next pull request for the 5.7 kernel.
- Added wideband speech support to mgmt and the ability for HCI drivers
to declare support for it.
- Added initial support for L2CAP Enhanced Credit Based Mode
- Fixed suspend handling for several use cases
- Fixed Extended Advertising related issues
- Added support for Realtek 8822CE device
- Added DT bindings for QTI chip WCN3991
- Cleanups to replace zero-length arrays with flexible-array members
- Several other smaller cleanups & fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
that has KRAIT processors the voltage/current value of each OPP
varies based on the silicon variant in use.
The required OPP related data is determined based on
the efuse value. This is similar to the existing code for
kryo cores. So adding support for krait cores here.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
i.MX8/8X SCU MU is dedicated for communication between SCU
and Cortex-A cores from hardware design, it could not be reused
for other purpose. To use SCU MU more effectivly, add "fsl,imx8-scu-mu"
compatile to support fast IPC.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
There is not any client driver using this feature now,
so remove it from binding.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This mailbox hardware is present in Allwinner sun6i, sun8i, sun9i, and
sun50i SoCs. Add a device tree binding for it.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UrsU
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.7' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next
Mediatek DRM Next for Linux 5.7
This include MT8183 DPI support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1584580683.29614.5.camel@mtksdaap41
The sram property was incorrectly added to the GMU binding when it
really belongs with the GPU binding instead. Let's go ahead and
move it.
While changes are being made here, let's update the sram property
description to mention that this property is only valid for a3xx and
a4xx GPUs. The a3xx/a4xx example in the GPU is replaced with what was
in the GMU.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Fixes: 198a72c8f9 ("dt-bindings: display: msm: gmu: add optional ocmem property")
Acked-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This patch brings support for the JZ4780 efuse. Currently it only exposes
a read only access to the entire 8K bits efuse memory.
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
[converted to yaml]
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200310132257.23358-12-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Includes changes for the counter subsystem
Core Feature
* Explicitly handle sysfs values in dB, including correctly handling the
needed postfix dB.
* Add a TODO to suggest suitable activities for new contributors to IIO now
the vast majority of drivers are out of staging (and the remaining ones
there are 'hard'). Also update the TODO in staging to remove stale entries.
Staging graduations
* ad7192 ADC.
New device support
* ad5770r
- New driver for this 6 channel DAC including DT bindings.
* ad8366
- Add supprot for the hmc1119 attenuator.
* al3010
- New driver supporting this Dyna-image light sensors.
- Power management and DT bindings added in additional patches.
* atlas-sensor
- Add support for atlas DO-SM device. Reads disolved oxygen in a solution.
* gpap002x00f
- New driver and bindings to support the GP2AP002A00F and GP2AP002S00F light
and proximity sensors. There is some limited existing support in
input. The intent is to drop this driver once IIO driver is in place.
* hmc425a
- New driver for this attenuator.
* icp10100
- New driver for this presure sensor.
* ltc2632
- Add support for the ltc2636 8 channel DAC. Includes bindings and some
tidying up of the driver.
* inv_mpu6050
- Support IAM20680, ICM20609, ICM20689 and ICM20690.
Includes related tidy up and rework of low pass filter bandwidth
handling to give suitable values for all chips.
Binding conversions to yaml or missing bindings docs.
* atlas-sensor, including consolidation of previous 3 separate docs into 1.
* ad7923, previously no doc.
* max1363, split into max1238 and max1363 to simplify yaml.
* stm32-adc
Features
* (counter) 104-quad-8
- Support a filter clock prescaler.
- Support reporting of encoder cable status.
* ad7124
- Low pass filter support.
- Debugfs interface to access registers directly.
* ad8366
- Support control of hardware gain.
* inv_mpu6050
- Runtime pm with autosuspend.
* npcm adc
- Add reset support. This is a breaking change if DT is not in sync,
however this device is a BMC so the ecosystem is closed enought that
this should not be a problem.
* srf04
- Add power management with DT bindings for the GPIO.
* stm32-timer-trigger
- Power management.
* (counter) stm32-timer-cnt
- Power management.
* vcnl4000
- Enable runtime PM for devices that don't use on demand measurement.
Cleanups and minor fixes
* core
- Avoid double read when using debugfs. Whilst we provide no guarantees
on lack of side effects using the debugfs interfaces, this one is
generate unexpected results so let us tidy it up.
* dac/Kconfig
- Alphabetic order.
* ad5755
- Grammar and minor other fixes.
* ad7124
- Fail probe if get_voltage fails as no meaningful readings can be had
without knowing the external reference.
- Switch to selection between different channel attributes rather than
building the arrays at runtime.
- Remove the spi_device_id table as the driver cannot be probled without
more information that can be provided without dt.
- Update sysfs docs to provide more inormation and bring remaining docs for
this part out of staging.
* ad9292
- Use new SPI transfer delay structure.
* adis library
- Add unlocked version of adis_initial_startup and refactor the function.
- Add a product ID santiy check.
- Add support for different self test registers.
- Use new SPI delay structure.
- Add new docs and tidy up existing.
* adis16136
- Initialize adis_data statically.
* adis16400
- Initialize adis_data statically.
* adis16460
- Use core __adis_initial_Startup now it supports everything needed.
* adis16480
- Initialize adis_data statically.
- Use core __adis_initial_startup now it supports everything needed.
* al3320a
- Add missing DT binding docs.
- Tidy up code formatting.
- Simplify error paths using devm_add_action_or_reset.
- Ensure autoloading works by adding the of_match_table.
* atlas-sensor
- Drop false requirement for interrupt line, the value can be polled using
a sysfs or hrtimer type trigger.
* exynos-adc
- Silence warning message on deferring probe.
* gp2ap002
- Greatly simplify the Lux LUT.
- Reorder actions around buffer setup and tear down as part of a sub-system
wide standardization of these.
* inv_mpu6050
- Various lttle tidyups.
- Simpliy I2C aux MUX handling by enabling it only at startup. It never
needs to be disabled.
- Simplify polling rate when magnetometer enabled by putting only under
control of userspace.
- Always execute full reset on devices supporting spi. It does no harm
when using i2c and makes for simpler code.
- Reduce over the top sleep times for vddio regulator power up.
- Greatly simplify power and engine management.
- Fix some delays in polled reads (only visible due to other changes)
- Stop preventing sampling rate changes whilst running as there is no
adverse consequence of doing so.
- Prevent attempting to read the temperature if neither accel nor
gyro is enabled.
* lmp9100
- Reorder actions around buffer setup and tear down as part of a sub-system
wide standardization of these.
* max1118
- Use new SPI transfer delay structure.
* mcp320x
- Use new SPI transfer delay structure.
* si1133
- Read full 24 bit signed integer instead o dropping last 8 bits of value.
Not a critical fix as just adds precision.
* st_sensors
- Use st_sensors_dev_name_probe instead of open coded version in st_accel
- Handle potential memory allocation failure.
* st_lsm6dsx
- Fix some wrong structure element naming in documentation.
- Add missing return value check.
* stm32_timer_cnt
- Drop some unused left over IIO headers from this count subsystem driver.
- Ensure the clock is enabled in master mode. Theoretical issue rather
than one known to happen in the wild.
* tlc4541
- Use new SPI delay structure.
-----BEGIN PGP SIGNATURE-----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=20Uc
-----END PGP SIGNATURE-----
Merge tag 'iio-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new IIO device support, fatures and cleanups for the 5.7 cycle
Includes changes for the counter subsystem
Core Feature
* Explicitly handle sysfs values in dB, including correctly handling the
needed postfix dB.
* Add a TODO to suggest suitable activities for new contributors to IIO now
the vast majority of drivers are out of staging (and the remaining ones
there are 'hard'). Also update the TODO in staging to remove stale entries.
Staging graduations
* ad7192 ADC.
New device support
* ad5770r
- New driver for this 6 channel DAC including DT bindings.
* ad8366
- Add supprot for the hmc1119 attenuator.
* al3010
- New driver supporting this Dyna-image light sensors.
- Power management and DT bindings added in additional patches.
* atlas-sensor
- Add support for atlas DO-SM device. Reads disolved oxygen in a solution.
* gpap002x00f
- New driver and bindings to support the GP2AP002A00F and GP2AP002S00F light
and proximity sensors. There is some limited existing support in
input. The intent is to drop this driver once IIO driver is in place.
* hmc425a
- New driver for this attenuator.
* icp10100
- New driver for this presure sensor.
* ltc2632
- Add support for the ltc2636 8 channel DAC. Includes bindings and some
tidying up of the driver.
* inv_mpu6050
- Support IAM20680, ICM20609, ICM20689 and ICM20690.
Includes related tidy up and rework of low pass filter bandwidth
handling to give suitable values for all chips.
Binding conversions to yaml or missing bindings docs.
* atlas-sensor, including consolidation of previous 3 separate docs into 1.
* ad7923, previously no doc.
* max1363, split into max1238 and max1363 to simplify yaml.
* stm32-adc
Features
* (counter) 104-quad-8
- Support a filter clock prescaler.
- Support reporting of encoder cable status.
* ad7124
- Low pass filter support.
- Debugfs interface to access registers directly.
* ad8366
- Support control of hardware gain.
* inv_mpu6050
- Runtime pm with autosuspend.
* npcm adc
- Add reset support. This is a breaking change if DT is not in sync,
however this device is a BMC so the ecosystem is closed enought that
this should not be a problem.
* srf04
- Add power management with DT bindings for the GPIO.
* stm32-timer-trigger
- Power management.
* (counter) stm32-timer-cnt
- Power management.
* vcnl4000
- Enable runtime PM for devices that don't use on demand measurement.
Cleanups and minor fixes
* core
- Avoid double read when using debugfs. Whilst we provide no guarantees
on lack of side effects using the debugfs interfaces, this one is
generate unexpected results so let us tidy it up.
* dac/Kconfig
- Alphabetic order.
* ad5755
- Grammar and minor other fixes.
* ad7124
- Fail probe if get_voltage fails as no meaningful readings can be had
without knowing the external reference.
- Switch to selection between different channel attributes rather than
building the arrays at runtime.
- Remove the spi_device_id table as the driver cannot be probled without
more information that can be provided without dt.
- Update sysfs docs to provide more inormation and bring remaining docs for
this part out of staging.
* ad9292
- Use new SPI transfer delay structure.
* adis library
- Add unlocked version of adis_initial_startup and refactor the function.
- Add a product ID santiy check.
- Add support for different self test registers.
- Use new SPI delay structure.
- Add new docs and tidy up existing.
* adis16136
- Initialize adis_data statically.
* adis16400
- Initialize adis_data statically.
* adis16460
- Use core __adis_initial_Startup now it supports everything needed.
* adis16480
- Initialize adis_data statically.
- Use core __adis_initial_startup now it supports everything needed.
* al3320a
- Add missing DT binding docs.
- Tidy up code formatting.
- Simplify error paths using devm_add_action_or_reset.
- Ensure autoloading works by adding the of_match_table.
* atlas-sensor
- Drop false requirement for interrupt line, the value can be polled using
a sysfs or hrtimer type trigger.
* exynos-adc
- Silence warning message on deferring probe.
* gp2ap002
- Greatly simplify the Lux LUT.
- Reorder actions around buffer setup and tear down as part of a sub-system
wide standardization of these.
* inv_mpu6050
- Various lttle tidyups.
- Simpliy I2C aux MUX handling by enabling it only at startup. It never
needs to be disabled.
- Simplify polling rate when magnetometer enabled by putting only under
control of userspace.
- Always execute full reset on devices supporting spi. It does no harm
when using i2c and makes for simpler code.
- Reduce over the top sleep times for vddio regulator power up.
- Greatly simplify power and engine management.
- Fix some delays in polled reads (only visible due to other changes)
- Stop preventing sampling rate changes whilst running as there is no
adverse consequence of doing so.
- Prevent attempting to read the temperature if neither accel nor
gyro is enabled.
* lmp9100
- Reorder actions around buffer setup and tear down as part of a sub-system
wide standardization of these.
* max1118
- Use new SPI transfer delay structure.
* mcp320x
- Use new SPI transfer delay structure.
* si1133
- Read full 24 bit signed integer instead o dropping last 8 bits of value.
Not a critical fix as just adds precision.
* st_sensors
- Use st_sensors_dev_name_probe instead of open coded version in st_accel
- Handle potential memory allocation failure.
* st_lsm6dsx
- Fix some wrong structure element naming in documentation.
- Add missing return value check.
* stm32_timer_cnt
- Drop some unused left over IIO headers from this count subsystem driver.
- Ensure the clock is enabled in master mode. Theoretical issue rather
than one known to happen in the wild.
* tlc4541
- Use new SPI delay structure.
* tag 'iio-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (98 commits)
iio: dac: Kconfig: sort symbols alphabetically
iio: light: gp2ap020a00f: fix iio_triggered_buffer_{predisable,postenable} positions
iio: potentiostat: lmp9100: fix iio_triggered_buffer_{predisable,postenable} positions
iio: trigger: stm32-timer: add power management support
iio: trigger: stm32-timer: rename enabled flag
iio: add a TODO
counter: 104-quad-8: Support Differential Encoder Cable Status
counter: 104-quad-8: Support Filter Clock Prescaler
iio: pressure: icp10100: add driver for InvenSense ICP-101xx
iio: industrialio-core: Fix debugfs read
iio: imu: adis: add a note better explaining state_lock
iio: imu: adis: update 'adis_data' struct doc-string
iio: imu: adis: add doc-string for 'adis' struct
iio: imu: adis_buffer: Use new structure for SPI transfer delays
iio: adc: ti-tlc4541: Use new structure for SPI transfer delays
iio: adc: mcp320x: Use new structure for SPI transfer delays
iio: adc: max1118: Use new structure for SPI transfer delays
iio: adc: ad9292: Use new structure for SPI transfer delays
iio: adc: exynos: Silence warning about regulators during deferred probe
staging: iio: update TODO
...
Convert ingenic,jz4740-musb.txt to ingenic,musb.yaml, and add the
new ingenic,jz4770-musb and ingenic,jz4725b-musb compatible strings
in the process.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200316211136.2274-3-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MP8867 is an I2C-controlled adjustable voltage regulator made by
Monolithic Power Systems. The difference between MP8867 and MP8869
are:
1.If V_BOOT, the vref of MP8869 is fixed at 600mv while vref of MP8867
is determined by the I2C control.
2.For MP8867, when setting voltage, if the steps is within 5, we need
to manually set the GO_BIT to 0.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200316223100.37805b22@xhacker
Signed-off-by: Mark Brown <broonie@kernel.org>
The MP8869 from Monolithic Power Systems is a single output dc/dc
converter with voltage control over i2c.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200316222945.74ad34dd@xhacker
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the binding for MT2712 RTC implemented by rtc-mt2712.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Link: https://lore.kernel.org/r/20200226051303.22560-2-ran.bi@mediatek.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Lots of changes on dwc3 this time, most of them from Thinh fixing a
bunch of really old mishaps on the driver.
DWC2 got support for STM32MP15 and a couple RockChip SoCs while DWC3
learned about Amlogic A1 family.
Apart from these, we have a few spelling fixes and other minor
non-critical fixes all over the place.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
-----BEGIN PGP SIGNATURE-----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=L9gx
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB: changes for v5.7 merge window
Lots of changes on dwc3 this time, most of them from Thinh fixing a
bunch of really old mishaps on the driver.
DWC2 got support for STM32MP15 and a couple RockChip SoCs while DWC3
learned about Amlogic A1 family.
Apart from these, we have a few spelling fixes and other minor
non-critical fixes all over the place.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'usb-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (41 commits)
dt-bindings: usb: add documentation for aspeed usb-vhub
ARM: dts: aspeed-g4: add vhub port and endpoint properties
ARM: dts: aspeed-g5: add vhub port and endpoint properties
ARM: dts: aspeed-g6: add usb functions
usb: gadget: aspeed: add ast2600 vhub support
usb: gadget: aspeed: read vhub properties from device tree
usb: gadget: aspeed: support per-vhub usb descriptors
usb: gadget: f_phonet: Replace zero-length array with flexible-array member
usb: gadget: composite: Inform controller driver of self-powered
usb: gadget: amd5536udc: fix spelling mistake "reserverd" -> "reserved"
udc: s3c-hsudc: Silence warning about supplies during deferred probe
usb: dwc2: Silence warning about supplies during deferred probe
dt-bindings: usb: dwc2: add compatible property for rk3368 usb
dt-bindings: usb: dwc2: add compatible property for rk3328 usb
usb: gadget: add raw-gadget interface
usb: dwc2: Implement set_selfpowered()
usb: dwc3: qcom: Replace <linux/clk-provider.h> by <linux/of_clk.h>
usb: dwc3: core: don't do suspend for device mode if already suspended
usb: dwc3: Rework resets initialization to be more flexible
usb: dwc3: Rework clock initialization to be more flexible
...
ath.git patches for v5.7. Major changes:
ath10k
* support for getting btcoex settings from Device Tree
* support QCA9377 SDIO device
ath11k
* add HE rate accounting
* add thermal sensor and cooling devices
Add device tree binding documentation for the Aspeed USB 2.0 Virtual HUb
Controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dt.yaml: usb@ff580000:
compatible:
['rockchip,rk3368-usb', 'rockchip,rk3066-usb', 'snps,dwc2']
is not valid under any of the given schemas
The compatible property for rk3368 dwc2 usb was somehow never added to
the documention. Fix this error by adding
'rockchip,rk3368-usb', 'rockchip,rk3066-usb', 'snps,dwc2'
to dwc2.yaml.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@ff580000:
compatible:
['rockchip,rk3328-usb', 'rockchip,rk3066-usb', 'snps,dwc2']
is not valid under any of the given schemas
The compatible property for rk3328 dwc2 usb was somehow never added to
the documention. Fix this error by adding
'rockchip,rk3328-usb', 'rockchip,rk3066-usb', 'snps,dwc2'
to dwc2.yaml.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Rather then adding another device specific binding to support
hikey960, Rob Herring suggested we expand the current dwc3
binding to allow for variable numbers of clocks and resets.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
CC: ShuFan Lee <shufan_lee@richtek.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Guillaume Gardet <Guillaume.Gardet@arm.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Suggested-by: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Add binding to configure the default role the controller
assumes is host mode when the usb role is USB_ROLE_NONE.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
CC: ShuFan Lee <shufan_lee@richtek.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Guillaume Gardet <Guillaume.Gardet@arm.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch updates the documentation with the information related
to the quirks that needs to be added for disabling all SuperSpeed XHCI
instances in park mode.
Cc: Dongjin Kim <tobetter@gmail.com>
Cc: Jianxin Pan <jianxin.pan@amlogic.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Reported-by: Tim <elatllat@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The Amlogic A1 SoC Family embeds 1 USB Controllers:
- a DWC3 IP configured as Host for USB2 and USB3
A glue connects the controllers to the USB2 PHY of A1 SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Qualcomm SoCs (starting with MSM8998) allow for multiple protection
domains (PDs) to run on the same Q6 sub-system. This allows for
services like AVS AUDIO to have their own separate address space and
crash/recover without disrupting the other PDs running on the same Q6
ADSP. Add "qcom,protection-domain" bindings to capture the dependencies
between the APR service and the PD on which the apr service runs.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200312120842.21991-3-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fix following type af warnings in the panel bindings:
Warning (unit_address_vs_reg): /example-0/dsi/panel: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /example-0/dsi@ff450000: node has a unit name, but no reg property
Removing the "@xxx" from the node name fixed first warning.
Adding a missing reg property fixed the second warning
v2:
- renamed mdss_dsi to dsi in panel-simple-dsi.yaml (Rob)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200308115017.18563-2-sam@ravnborg.org
Add missing definition of rpm clk for ipq806x soc
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: John Crispin <john@phrozen.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200310143756.244-1-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The descriptions for the spi-rx-bus-width and spi-tx-bus-width
properties refer to "MISO" and "MOSI", which are not explained in the
document. While these abbreviations are fairly common when talking
about SPI, and thus may not need an explanation, they are not entirely
correct in this context, as the SPI controller may be used in slave mode
instead of master mode.
Fix this by replacing them by "read transfers" resp. "write transfers",
like is done for the spi-rx-delay-us and spi-tx-delay-us properties.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200306085038.8111-3-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the DT bindings for an SPI controller specify that
"#address-cells" must be fixed to one. However, that applies to an SPI
controller in master mode only. When running in SPI slave mode,
"#address-cells" should not be specified.
Fix this making "#address-cells" mutually-exclusive with "spi-slave".
Fixes: 0a1b929356 ("spi: Add YAML schemas for the generic SPI options")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200306085038.8111-2-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset from Chuanhong Guo <gch981213@gmail.com> adds a spi-mem
driver for Mediatek SPI-NOR controller, which already has limited
support by mtk-quadspi. This new driver can make use of full quadspi
capability of this controller.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl5pQmYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0D9sB/9PBy5hYIWLJOqP3Tegy+si7eEjgYQe
32DvHZRYYL+Oc8OQMGnJYUY5grfriS300TjxeB4MNx8ajVyuaH7e2aIhgTz3oJ6a
YrygFcxEi0LmRT82HyLVxptyblMSo3A8QWOTOqe1aFvJRZjDDKvEIcGCW2RPmtxT
r/EoVVkSv4X+k3GUtYnRBrq12hL+vr1YIjZM05MVu2sDtFXLO2+wotFIODDv15zi
ByBtwhKumKawUOETzGDw4EDV5MJx9nZtswRC4x3hDrLS6au39F/MyP78gpHm8vw+
YfiS5/39rkB6j1QltcP3B9n7joxrgaFAYsLBTZUoE3IjeVTggcKCOSVX
=q5ml
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEHUIqys8OyG1eHf7fS1VPR6WNFOkFAl5rqKYACgkQS1VPR6WN
FOltQggAvmX8EZO9DvpKr6rVhrapDgkJUT5QmwTwZfmBgp5vlRqd8AvY2IYx6/a8
yVr8TwvbJuvPKaC3PI6I9/feDYx2P5NA9fAoqy6bMACeAwuXcDwjnv/aJo74bf6d
cY2zm/heVXJ9qecPmf0msgxBpnKBaxO/u9JmyX197pHdz3vAqNq2t4w4npSqnUlJ
M/dtUxL8bIjkPeQfbV3F+2y6Ttu5hsGauy5y+spnMnMga4+tTxtokauyPBxvkllv
tqbXP5Q1C0ogByJ0rg1M7XqLb1IuCNzYo5aH20T98aCxmcUyTVnanAMX9J/rmbH8
7ykpSUYMP5WvbpRUqdIWvhmJtkPbSA==
=mMmy
-----END PGP SIGNATURE-----
Merge tag 'mtk-mtd-spi-move' into spi-nor/next
spi: Rewrite mtk-quadspi spi-nor driver with spi-mem
This patchset from Chuanhong Guo <gch981213@gmail.com> adds a spi-mem
driver for Mediatek SPI-NOR controller, which already has limited
support by mtk-quadspi. This new driver can make use of full quadspi
capability of this controller.
The mtk-quadspi driver is replaced by the new spi-mtk-nor driver.
Merge it in spi-nor/next to avoid conflicts during the release cycle.
Add device-tree binding documentation for the XUSB device mode controller
present on Tegra210 and Tegra186 SoC. This controller supports the USB 3.0
specification.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add usb-role-switch property for Tegra210 and Tegra186 platforms. This
entry is used by XUSB pad controller driver to register for role changes
for OTG/Peripheral capable USB 2 ports.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Extend the bindings to cover the set of features found in Tegra194.
Note that, technically, there are four more supplies connected to the
XUSB pad controller (DVDD_PEX, DVDD_PEX_PLL, HVDD_PEX and HVDD_PEX_PLL)
, but the power sequencing requirements of Tegra194 require these to be
under the control of the PMIC.
Tegra194 XUSB PADCTL supports up to USB 3.1 Gen 2 speed, however, it
is possible for some platforms have long signal trace that could not
provide sufficient electrical environment for Gen 2 speed. This patch
adds a "maximum-speed" property to usb3 ports which can be used to
specify the maximum supported speed for any particular USB 3.1 port.
For a port that is not capable of SuperSpeedPlus, "maximum-speed"
property should carry "super-speed".
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Since commit 93512dad33 ("dt-bindings: Improve validation build error
handling"), 'make dtbs_check' does not validate the schema fully.
If you want to check everything, you need to run two commands separately.
$ make ARCH=arm dt_binding_check
$ make ARCH=arm dtbs_check
They are exclusive each other, so you cannot do like this:
$ make ARCH=arm dt_binding_check dtbs_check
In this case, dt-doc-validate and dt-extract-example are skipped
because CHECK_DTBS is set.
Let's make it possible to run these two targets in a single command.
It will be useful for schema writers.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Pull networking fixes from David Miller:
"It looks like a decent sized set of fixes, but a lot of these are one
liner off-by-one and similar type changes:
1) Fix netlink header pointer to calcular bad attribute offset
reported to user. From Pablo Neira Ayuso.
2) Don't double clear PHY interrupts when ->did_interrupt is set,
from Heiner Kallweit.
3) Add missing validation of various (devlink, nl802154, fib, etc.)
attributes, from Jakub Kicinski.
4) Missing *pos increments in various netfilter seq_next ops, from
Vasily Averin.
5) Missing break in of_mdiobus_register() loop, from Dajun Jin.
6) Don't double bump tx_dropped in veth driver, from Jiang Lidong.
7) Work around FMAN erratum A050385, from Madalin Bucur.
8) Make sure ARP header is pulled early enough in bonding driver,
from Eric Dumazet.
9) Do a cond_resched() during multicast processing of ipvlan and
macvlan, from Mahesh Bandewar.
10) Don't attach cgroups to unrelated sockets when in interrupt
context, from Shakeel Butt.
11) Fix tpacket ring state management when encountering unknown GSO
types. From Willem de Bruijn.
12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend()
only in the suspend context. From Heiner Kallweit"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
net: systemport: fix index check to avoid an array out of bounds access
tc-testing: add ETS scheduler to tdc build configuration
net: phy: fix MDIO bus PM PHY resuming
net: hns3: clear port base VLAN when unload PF
net: hns3: fix RMW issue for VLAN filter switch
net: hns3: fix VF VLAN table entries inconsistent issue
net: hns3: fix "tc qdisc del" failed issue
taprio: Fix sending packets without dequeueing them
net: mvmdio: avoid error message for optional IRQ
net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register
net: memcg: fix lockdep splat in inet_csk_accept()
s390/qeth: implement smarter resizing of the RX buffer pool
s390/qeth: refactor buffer pool code
s390/qeth: use page pointers to manage RX buffer pool
seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
net/packet: tpacket_rcv: do not increment ring index on drop
sxgbe: Fix off by one in samsung driver strncpy size arg
net: caif: Add lockdep expression to RCU traversal primitive
MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer
...
Convert the usb-connector.txt bindings file to YAML format. This allows
it to be used in dt_bindings_check verification. This patch was
born out of a patch series for the addition of a Type C connector
class port driver[1].
An attempt has been made to maintain the same documentation text and
example structure as was in the .txt file, but wherever needed
modifications have been made to satisfy dt_bindings_check.
Also, update all references to usb-connector.txt to now use
usb-connector.yaml.
[1]: https://lkml.org/lkml/2020/2/19/1232
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
The Amlogic G12A SPICC controllers uses a secondary clock used to feed the
baud rate generator and the delay control logic.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200312133131.26430-9-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kryo280 is found in msm8998, so add it to the list of cpu compatibles.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
The description below is already in use for px30.dtsi,
but was somehow never added to a document, so add
"rockchip,px30-i2c", "rockchip,rk3399-i2c"
for i2c nodes on a px30 platform to i2c-rk3x.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The description below is already in use for rk3308.dtsi,
but was somehow never added to a document, so add
"rockchip,rk3308-i2c", "rockchip,rk3399-i2c"
for i2c nodes on a rk3308 platform to i2c-rk3x.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The description below is already in use for rk3368.dtsi,
but was somehow never added to a document, so add
"rockchip,rk3368-i2c", "rockchip,rk3288-i2c"
for i2c nodes on a rk3368 platform to i2c-rk3x.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The description below is already in use for rk3036.dtsi,
but was somehow never added to a document, so add
"rockchip,rk3036-i2c", "rockchip,rk3288-i2c"
for i2c nodes on a rk3036 platform to i2c-rk3x.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Current dts files with 'i2c' nodes are manually verified.
In order to automate this process i2c-rk3x.txt
has to be converted to yaml. In the new setup
i2c-rk3x.yaml will inherit properties from
i2c-controller.yaml.
Also change document name in MAINTAINERS.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Document the optional binding to limit the possible sdtv standards on the
input connectors.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use underlines to highlight optional and required properties. This is
quite common for all bindings. Align descriptions and start sentence
with uppercase letter. Also reword the usage of the required
endpoint properties for the output port in case BT.656 should be used.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The TVP5150/1 decoders support different video input sources to their
AIP1A/B pins.
Possible configurations are as follows:
- Analog Composite signal connected to AIP1A.
- Analog Composite signal connected to AIP1B.
- Analog S-Video Y (luminance) and C (chrominance)
signals connected to AIP1A and AIP1B respectively.
This patch extends the device tree bindings documentation to describe
how the input connectors for these devices should be defined in a DT.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some connectors no matter if in- or output supports only a limited
range of sdtv standards. It doesn't matter if the hardware behind that
connector supports more than the listed formats since the users are
restriced by a label e.g. to plug only a camera into this connector
which uses the PAL format.
This patch adds the capability to describe such limitation within the
firmware. There are no format restrictions if the property isn't
present, so it's completely backward compatible.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Extra dtc warnings (roughly what W=1 enables) are now enabled by default
when building the binding examples. These were fixed treewide in
5.6-rc5, but the newly added google,cros-ec-codec schema adds some new
warnings:
Documentation/devicetree/bindings/sound/google,cros-ec-codec.example.dts:17.28-21.11:
Warning (unit_address_vs_reg): /example-0/reserved_mem: node has a reg or ranges property, but no unit name
Documentation/devicetree/bindings/sound/google,cros-ec-codec.example.dts:22.19-32.11:
Warning (unit_address_vs_reg): /example-0/cros-ec@0: node has a unit name, but no reg property
Documentation/devicetree/bindings/sound/google,cros-ec-codec.example.dts:26.37-31.15:
Warning (unit_address_vs_reg): /example-0/cros-ec@0/ec-codec: node has a reg or ranges property, but no unit name
Fixing the above, then results in:
Documentation/devicetree/bindings/sound/google,cros-ec-codec.example.dts:26.13-23:
Warning (reg_format): /example-0/cros-ec@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/sound/google,cros-ec-codec.example.dts:27.37-32.15:
Warning (unit_address_vs_reg): /example-0/cros-ec@0/ec-codec: node has a reg or ranges property, but no unit name
Fixes: eadd54c75f ("dt-bindings: Convert the binding file google, cros-ec-codec.txt to yaml format.")
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: alsa-devel@alsa-project.org
Cc: Benson Leung <bleung@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20200311205841.2710-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If the kernel configuration option CONFIG_PCIE_DW_PLAT_HOST is enabled
then this can cause the kernel to incorrectly probe the generic
designware PCIe platform driver instead of the Tegra194 designware PCIe
driver. This causes a boot failure on Tegra194 because the necessary
configuration to access the hardware is not performed.
The order in which the compatible strings are populated in Device-Tree
is not relevant in this case, because the kernel will attempt to probe
the device as soon as a driver is loaded and if the generic designware
PCIe driver is loaded first, then this driver will be probed first.
Therefore, to fix this problem, remove the "snps,dw-pcie" string from
the compatible string as we never want this driver to be probe on
Tegra194.
Fixes: 2602c32f15 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
system controller, the system controller is in charge of system
power, clock and thermal sensors etc. management, Linux kernel
has to communicate with system controller via MU (message unit)
IPC to get temperature from thermal sensors, this patch adds
binding doc for i.MX system controller thermal driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1582330132-13461-1-git-send-email-Anson.Huang@nxp.com
Add documentation for the devicetree bindings of the
Ingenic JZ4770 USB transceiver.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200229161820.17824-1-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The definitions for the "qcom,smem-states" and "qcom,smem-state-names"
properties need to list their "$ref" under an "allOf" keyword.
In addition, fix two problems in the example at the end:
- Use #include for header files that define needed symbolic values
- Terminate the line that includes the "ipa-shared" register space
name with a comma rather than a semicolon
Finally, update some white space in the example for better alignment.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset from Chuanhong Guo <gch981213@gmail.com> adds a spi-mem
driver for Mediatek SPI-NOR controller, which already has limited
support by mtk-quadspi. This new driver can make use of full quadspi
capability of this controller.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl5pQmYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0D9sB/9PBy5hYIWLJOqP3Tegy+si7eEjgYQe
32DvHZRYYL+Oc8OQMGnJYUY5grfriS300TjxeB4MNx8ajVyuaH7e2aIhgTz3oJ6a
YrygFcxEi0LmRT82HyLVxptyblMSo3A8QWOTOqe1aFvJRZjDDKvEIcGCW2RPmtxT
r/EoVVkSv4X+k3GUtYnRBrq12hL+vr1YIjZM05MVu2sDtFXLO2+wotFIODDv15zi
ByBtwhKumKawUOETzGDw4EDV5MJx9nZtswRC4x3hDrLS6au39F/MyP78gpHm8vw+
YfiS5/39rkB6j1QltcP3B9n7joxrgaFAYsLBTZUoE3IjeVTggcKCOSVX
=q5ml
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl5pQt4THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0BFqB/9jBg5bNy9mNXljELZ7RKCtbn9CThYk
NvccckUJnjaTxSccGcGEetfFtoVvM4IJ8ffiL6gBrNDgvuSbedLkboqlftRRbkE2
tvxnfjKGeiVIHXcXG0kzrVMDPPncYy+o8nQMJ8b/v+VFeLah6LCo0nT4t54LPvfZ
52Nncdr8jAnjoet7t2CX2nJrhTOPUGhC7HxbwOyu2HOOd5nWmYAdT4UZo4Vdv1g9
L1knLoZctpvCpql/mUWdOAqQbD0bD0vT3FKQaq6C6kAeE+kMWSGdPgYxyFdBEVXi
uOmaqU7lHt2bsr6TRbOpw4ON0PzQtzZ/YhW2XEPJd6uc3GWy//qEyqgO
=qoqi
-----END PGP SIGNATURE-----
Merge tag 'mtk-mtd-spi-move' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.7
spi: Rewrite mtk-quadspi spi-nor driver with spi-mem
This patchset from Chuanhong Guo <gch981213@gmail.com> adds a spi-mem
driver for Mediatek SPI-NOR controller, which already has limited
support by mtk-quadspi. This new driver can make use of full quadspi
capability of this controller.
spi-mtk-nor is a driver to replace mtk-quadspi and they have almost
the same device-tree bindings. Reuse this binding documentation and
convert it for new driver:
1. "Mediatek SoCs" -> "Mediatek ARM SoCs" because MTK MIPS SoCs
use different controllers.
2. document "interrupts" as a required property because it's
available on all SoCs with this controller and new driver takes
advantages of it. It's implemented as optional only to maintain
backward compatibility.
3. add a dummy interrupt binding in example.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Link: https://lore.kernel.org/r/20200306085052.28258-4-gch981213@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the STM32 SPDIFRX bindings to DT schema format using json-schema.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200117170352.16040-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The A33 SS has a difference with all other SS, it give SHA1 digest
directly in BE.
This difference need to be handlded by the driver and so need a new
compatible.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add support for PCIe controllers that can operate in endpoint mode
in Tegra194.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
i.MX6UL example uses a specific node name for the crypto node.
Let's fix it so we avoid this propagating further.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
crypto node should use the "crypto" generic naming,
and not the "dcp" specific one.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
crypto node should use the "crypto" generic naming,
and not a specific one.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A test with the command below gives this error:
arch/arm/boot/dts/rk3036-evb.dt.yaml: /: compatible:
['rockchip,rk3036-evb', 'rockchip,rk3036']
is not valid under any of the given schemas
This board was somehow never added to the documentation.
Fix this error by adding the rk3036-evb board to rockchip.yaml.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/rockchip.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200302092759.3291-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives this error:
arch/arm/boot/dts/rk3036-kylin.dt.yaml: /: compatible:
['rockchip,rk3036-kylin', 'rockchip,rk3036']
is not valid under any of the given schemas
Normally the dt-binding is the authoritative part, so boards should follow
the binding, but in the kylin-case the compatible from the .dts is used for
years in the field now, so fix the binding, as otherwise
we would break old users.
Fix this error by changing 'rockchip,kylin-rk3036' to
'rockchip,rk3036-kylin' in rockchip.yaml.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/rockchip.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200302092759.3291-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Convert the Renesas Clock Pulse Generator / Module Standby and Software
Reset Device Tree binding documentation to json-schema.
Note that #reset-cells was incorrecty marked a required property for
RZ/A2 before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200303094848.23670-1-geert+renesas@glider.be
Convert Renesas R-Car VIN bindings documentation to json-schema.
As the examples in the bindings now can be tested add a new one which
describes how the both a parallel and a CSI-2 source can be connected on
Gen3 SoCs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5lkYceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGpHQH/RJrzcaZHo4lw88m
Jf7vBZ9DYUlRgqE0pxTHWmodNObKRqpwOUGflUcWbb/7GD2LQUfeqhSECVQyTID9
N9y7FcPvx321Qhc3EkZ24DBYk0+DQ0K2FVUrSa/PxO0n7czxxXWaLRDmlSULEd3R
D4pVs3zEWOBXJHUAvUQ5R+lKfkeWKNeeepeh+rezuhpdWFBRNz4Jjr5QUJ8od5xI
sIwobYmESJqTRVBHqW8g2T2/yIsFJ78GCXs8DZLe1wxh40UbxdYDTA0NDDTHKzK6
lxzBgcmKzuge+1OVmzxLouNWMnPcjFlVgXWVerpSy3/SIFFkzzUWeMbqm6hKuhOn
wAlcIgI=
=VQUc
-----END PGP SIGNATURE-----
Merge v5.6-rc5 into drm-next
Requested my mripard for some misc patches that need this as a base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Consolidate and move the 'secondary-boot-reg' property from the 3
existing binding documents into the main cpus.yaml documentation, also
make sure that the property is enforced when relevant.
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update Vulcan SoC family binding document for boards/SoCs to use YAML.
Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom BCM11351 SoC family binding document for boards/SoCs
to use YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom BCM4708 SoC family binding document for boards/SoCs
to use YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom BCM23550 SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom BCM21664 SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom Stingray SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom Northstar 2 SoC binding document for boards/SoCs to
use YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom Northstar Plus SoC binding document for boards/SoCs
to use YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom Hurricane 2 SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadocom Cygnus SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
A test with the command below gives these errors:
arch/arm64/boot/dts/rockchip/rk3308-evb.dt.yaml: serial@ff0d0000: compatible:
['rockchip,rk3308-uart', 'snps,dw-apb-uart']
is not valid under any of the given schemas
arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dt.yaml: serial@ff0a0000: compatible:
['rockchip,rk3308-uart', 'snps,dw-apb-uart']
is not valid under any of the given schemas
The compatible property for the Rockchip rk3308 uart was somehow never
added to the documention. Fix this error by adding 'rockchip,rk3308-uart'
to snps-dw-apb-uart.yaml.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/serial/
snps-dw-apb-uart.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The HDMI blocks in the BCM2771 have an i2c controller to retrieve the
EDID. This block is split into two parts, the BSC and the AUTO_I2C,
lying in two separate register areas.
The AUTO_I2C block has a mailbox-like interface and will take away the
BSC control from the CPU if enabled. However, the BSC is the actually
the same controller than the one supported by the brcmstb driver, and
the AUTO_I2C doesn't really bring any immediate benefit.
We can model it in the DT as a single device with two register range,
which will allow us to use or or the other in the driver without
changing anything in the DT.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Switch the DT binding to a YAML schema to enable the DT validation.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
We need the vt fixes in here and it resolves a merge issue with
drivers/tty/vt/selection.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support for MSM8976 was added to the clk-smd-rpm driver: let's
document here the newly added compatible string.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lkml.kernel.org/r/20191031112951.35850-3-kholk11@gmail.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This patch adds missing required properties of power-domains and resets.
Fortunately, no one has this device node for now, so that we don't
need to think of backward compatibility.
Fixes: 311accb645 ("clk: renesas: rcar-usb2-clock-sel: Add R-Car USB 2.0 clock selector PHY")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1583304137-28482-3-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Since the hardware requires to enable both USB 2.0 host and peripheral
functional clock, this patch fixes the documentation.
Fortunately, no one has this device node for now, so that we don't
need to think of backward compatibility.
Fixes: 311accb645 ("clk: renesas: rcar-usb2-clock-sel: Add R-Car USB 2.0 clock selector PHY")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1583304137-28482-2-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the binding definitions for the "qcom,ipa" device tree node.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add binding information for the adi,pwm-active-state property.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add binding for adi,adt7475 and variants.
Remove from trivial-devices.
Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Texas Instruments LM73 is a digital temperature sensor with 2-wire
interface. Add LM73 as a trivial device.
Signed-off-by: Henry Shen <henry.shen@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200212030615.28537-2-henry.shen@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document the AXI FAN Control IP core devicetree bindings.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191009102806.262241-2-nuno.sa@analog.com
[groeck: adi,pulses-per-revolution -> pulses-per-revolution]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
We've been accruing these for a couple of weeks, so the batch is a bit
bigger than usual.
Largest delta is due to a led-bl driver that is added -- there was
a miscommunication before the merge window and the driver didn't make it
in. Due to this, the platforms needing it regressed. At this point, it
seemed easier to add the new driver than unwind the changes.
Besides that, there are a handful of various fixes:
- AMD tee memory leak fix
- A handful of fixlets for i.MX SCU communication
- A few maintainers woke up and realized DEBUG_FS had been missing for
a while, so a few updates of that.
... and the usual collection of smaller fixes to various platforms.
-----BEGIN PGP SIGNATURE-----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=gCNz
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"We've been accruing these for a couple of weeks, so the batch is a bit
bigger than usual.
Largest delta is due to a led-bl driver that is added -- there was a
miscommunication before the merge window and the driver didn't make it
in. Due to this, the platforms needing it regressed. At this point, it
seemed easier to add the new driver than unwind the changes.
Besides that, there are a handful of various fixes:
- AMD tee memory leak fix
- A handful of fixlets for i.MX SCU communication
- A few maintainers woke up and realized DEBUG_FS had been missing
for a while, so a few updates of that.
... and the usual collection of smaller fixes to various platforms"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits)
ARM: socfpga_defconfig: Add back DEBUG_FS
arm64: dts: socfpga: agilex: Fix gmac compatible
ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS
arm64: dts: meson: fix gxm-khadas-vim2 wifi
arm64: dts: meson-sm1-sei610: add missing interrupt-names
ARM: meson: Drop unneeded select of COMMON_CLK
ARM: dts: bcm2711: Add pcie0 alias
ARM: dts: bcm283x: Add missing properties to the PWR LED
tee: amdtee: fix memory leak in amdtee_open_session()
ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set
arm: dts: dra76x: Fix mmc3 max-frequency
ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
bus: ti-sysc: Fix 1-wire reset quirk
ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value
soc: imx-scu: Align imx sc msg structs to 4
firmware: imx: Align imx_sc_msg_req_cpu_start to 4
firmware: imx: scu-pd: Align imx sc msg structs to 4
firmware: imx: misc: Align imx sc msg structs to 4
firmware: imx: scu: Ensure sequential TX
ARM: dts: imx7-colibri: Fix frequency for sd/mmc
...
Adding dt-bindings documentation for AD5770R DAC.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch add device tree binding documentation for AD7923 adc in YAML
format.
Signed-off-by: Daniel Junho <djunho@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since Atlas Scientific device support only varies from the compatible
string is ideal all the respective docs are merged into a single doc
named atlas,sensor.yaml
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Split the binding in two to reflect the threshold monitor capabilities
and hence interrupts vs the more straight forward parts that
don't have this facility.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
The Dyna-Image AL3010 is a 16-bit digital ambient light sensor which
provides a multiple gain function with linear response over a dynamic
range 1216/4863/19452/77806.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit add dt-bindings support to al3320a driver and vendor-prefix
dynaimage.
Partly based on unmerged commit:
"iio: Add Dyna-Image AP3223 ambient light and proximity driver"
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document support for Analog Devices MC425A Step Attenuator.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
FMAN DMA read or writes under heavy traffic load may cause FMAN
internal resource leak; thus stopping further packet processing.
The FMAN internal queue can overflow when FMAN splits single
read or write transactions into multiple smaller transactions
such that more than 17 AXI transactions are in flight from FMAN
to interconnect. When the FMAN internal queue overflows, it can
stall further packet processing. The issue can occur with any one
of the following three conditions:
1. FMAN AXI transaction crosses 4K address boundary (Errata
A010022)
2. FMAN DMA address for an AXI transaction is not 16 byte
aligned, i.e. the last 4 bits of an address are non-zero
3. Scatter Gather (SG) frames have more than one SG buffer in
the SG list and any one of the buffers, except the last
buffer in the SG list has data size that is not a multiple
of 16 bytes, i.e., other than 16, 32, 48, 64, etc.
With any one of the above three conditions present, there is
likelihood of stalled FMAN packet processing, especially under
stress with multiple ports injecting line-rate traffic.
To avoid situations that stall FMAN packet processing, all of the
above three conditions must be avoided; therefore, configure the
system with the following rules:
1. Frame buffers must not span a 4KB address boundary, unless
the frame start address is 256 byte aligned
2. All FMAN DMA start addresses (for example, BMAN buffer
address, FD[address] + FD[offset]) are 16B aligned
3. SG table and buffer addresses are 16B aligned and the size
of SG buffers are multiple of 16 bytes, except for the last
SG buffer that can be of any size.
Additional workaround notes:
- Address alignment of 64 bytes is recommended for maximally
efficient system bus transactions (although 16 byte alignment is
sufficient to avoid the stall condition)
- To support frame sizes that are larger than 4K bytes, there are
two options:
1. Large single buffer frames that span a 4KB page boundary can
be converted into SG frames to avoid transaction splits at
the 4KB boundary,
2. Align the large single buffer to 256B address boundaries,
ensure that the frame address plus offset is 256B aligned.
- If software generated SG frames have buffers that are unaligned
and with random non-multiple of 16 byte lengths, before
transmitting such frames via FMAN, frames will need to be copied
into a new single buffer or multiple buffer SG frame that is
compliant with the three rules listed above.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fixes for warnings introduced by hierarchical PSCI binding changes
- Fixes for broken doc references due to DT schema conversions
- Several grammar and typo fixes
- Fix a bunch of dtc warnings in examples
-----BEGIN PGP SIGNATURE-----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=sbhb
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another batch of DT fixes. I think this should be the last of it, but
sending pull requests seems to cause people to send more fixes.
Summary:
- Fixes for warnings introduced by hierarchical PSCI binding changes
- Fixes for broken doc references due to DT schema conversions
- Several grammar and typo fixes
- Fix a bunch of dtc warnings in examples"
* tag 'devicetree-fixes-for-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: arm: Fixup the DT bindings for hierarchical PSCI states
dt-bindings: power: Extend nodename pattern for power-domain providers
MAINTAINERS: update ALLWINNER CPUFREQ DRIVER entry
dt-bindings: bus: Drop empty compatible string in example
dt-bindings: power: Convert domain-idle-states bindings to json-schema
dt-bindings: arm: Fix cpu compatibles in the hierarchical example for PSCI
dt-bindings: arm: Correct links to idle states definitions
dt-bindings: mfd: Fix typo in file name of twl-familly.txt
dt-bindings: mfd: tps65910: Improve grammar
dt-bindings: mfd: zii,rave-sp: Fix a typo ("onborad")
dt-bindings: arm: fsl: fix APF6Dev compatible
dt-bindings: Fix dtc warnings in examples
docs: dt: fix several broken doc references
docs: dt: fix several broken references due to renames
MAINTAINERS: clean up PCIE DRIVER FOR CAVIUM THUNDERX
A couple of small fixes, one for a minor issue in the stm32-vrefbuf
driver and a documentation fix in the Qualcomm code.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl5ie5ITHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0J5lB/wOdphcQj9YKbq1fO5Z2i4zROn85dbT
JREqpS5SNY+znox3WFct08L7xyrUBwFgZwzlF0KTnoBfNLznjcdY34YNSswWMZzY
vo0frRtEzdetjtQOYzuKfr+cWSozNLFCz4rGb9eMZicR28yaU+WluKlNLtwgkgq0
WEqyDZKK1KhVZYDJPVY6gb3NgTYlUvaJyRKEFGxSNHTDR9qL5koP7ym1yIqBjAu/
N596CtL8A24z9x7Wlmt2I9m13S/YXPUbDibYU10UC6amFWfsiuZ0hi577ToXvr1X
PruiRr63WgFlHGedAjsyfW1y1O9oBvGksb9rlBmwYzssgnuqV5DTuxsB
=s+Ng
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes, one for a minor issue in the stm32-vrefbuf
driver and a documentation fix in the Qualcomm code"
* tag 'regulator-fix-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: stm32-vrefbuf: fix a possible overshoot when re-enabling
regulator: qcom_spmi: Fix docs for PM8004
The hierarchical topology with power-domain should be described through
child nodes, rather than as currently described in the PSCI root node. Fix
this by adding a patternProperties with a corresponding reference to the
power-domain DT binding.
Additionally, update the example to conform to the new pattern, but also to
the adjusted domain-idle-state DT binding.
Fixes: a3f048b542 ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: Add missing allOf, tweak power-domain node name]
Signed-off-by: Rob Herring <robh@kernel.org>
The existing binding requires the nodename to have a '@', which is a bit
limiting for the wider use case. Therefore, let's extend the pattern to
allow either '@' or '-'.
Fixes: a3f048b542 ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: drop example change]
Signed-off-by: Rob Herring <robh@kernel.org>
convert the binding file rockchip-drm.txt to yaml format.
This was tested and verified on ARM and ARM64 with:
make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
Changes since v2:
- add a missing ">" sign in maintainers list
- change the licens to GPL-2.0-only
- add "additionalProperties: false"
- change the commit message to conform that it was tested on both ARM and ARM64
Changes since v1:
- fixed worng sign-off
- fixed the path of the $id property to be the path of the yaml file
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121154314.3444-1-dafna.hirschfeld@collabora.com
Add a description for the new fsl,inverted-tx and fsl,inverted-rx
options for the i.MX UART peripheral.
Signed-off-by: George Hilliard <ghilliard@kopismobile.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200226222319.18383-2-ghilliard@kopismobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The KD35T133 is a 3.5" 320x480 DSI display used in the RK3326-based
Odroid Go Advance handheld device.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200229151506.750242-2-heiko@sntech.de
First set of patches for v5.7. Lots of mt76 patches as they missed the
v5.6 deadline and hence they were postponed to the next version.
Otherwise nothing special standing out.
mt76
Major changes:
* dual-band concurrent support for MT7615
* fixes for rx path race conditions
* coverage class support for MT7615
* beacon fixes for USB devices
* MT7615 LED support
* set_antenna support for MT7615
* tracing improvements
* preparation for supporting new USB devices
* tx power fixes
brcmfmac
* support BRCM 4364 found in MacBook Pro 15,2
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJeYQnTAAoJEG4XJFUm622bVEkH/13OGWPYjWQXeAFeMFiukSp0
NJk9s6xRQmzuLxJsharKfwpr1hVm93ZZpGCG8RGCRAlMJqRnRT9q429YNFcpbWFY
NIfsioktIk7wbyXiw6p73z+vlvRgCYTQ/QCr19731xRli2JCNh9ZYzAOA6I6iX8v
7nCcRLLm4NM/+L+iybBumgNB4/5CCRgQTJQqbtvrgDQYXLMtu6HqcHQ1ldzivM9U
cs9c25tthC5Zv7YhAscVRDys4ca1o/gJr7VB6surTqLCx02LmgUjBZQ9ZFqabSBa
hkumUGivGkRN6yW1CDYu+Gok5ij0a/A3QQ9Hy5gAq1KrjtUKXbZeFVNSBSiKtQQ=
=kUdG
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2020-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.7
First set of patches for v5.7. Lots of mt76 patches as they missed the
v5.6 deadline and hence they were postponed to the next version.
Otherwise nothing special standing out.
mt76
Major changes:
* dual-band concurrent support for MT7615
* fixes for rx path race conditions
* coverage class support for MT7615
* beacon fixes for USB devices
* MT7615 LED support
* set_antenna support for MT7615
* tracing improvements
* preparation for supporting new USB devices
* tx power fixes
brcmfmac
* support BRCM 4364 found in MacBook Pro 15,2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The description below is already in use for rk3328.dtsi,
but was somehow never added to a document, so add
"rockchip,rk3328-spi", "rockchip,rk3066-spi"
for spi nodes on a rk3328 platform to spi-rockchip.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200304184203.9548-3-jbx6244@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The description below is already in use for rk3308.dtsi,
but was somehow never added to a document, so add
"rockchip,rk3308-spi", "rockchip,rk3066-spi"
for spi nodes on a rk3308 platform to spi-rockchip.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200304184203.9548-2-jbx6244@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current dts files with 'spi' nodes are manually verified.
In order to automate this process spi-rockchip.txt
has to be converted to yaml. In the new setup
spi-rockchip.yaml will inherit properties from
spi-controller.yaml.
Add document to MAINTAINERS.
Also rk3188.dtsi, rk3288.dtsi, rk3368.dtsi and rk3399.dtsi
use an extra fallback string, so change this in the documentation.
Changed:
"rockchip,rk3188-spi", "rockchip,rk3066-spi"
"rockchip,rk3288-spi", "rockchip,rk3066-spi"
"rockchip,rk3368-spi", "rockchip,rk3066-spi"
"rockchip,rk3399-spi", "rockchip,rk3066-spi"
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200304184203.9548-1-jbx6244@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPI bus number is completely optional to Linux, so make the
corresponding device tree property optional as well.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20200305115546.31814-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the Cadence MHDP PHY bindings. The binding is added
in next commit in YAML format. It is renamed to adopt
torrent nomenclature.
This will not affect ABI as the driver has never been functional,
and therefore do not exist in any active use case.
Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Shenzen Elida Technology Co. Ltd. is a Chinese TFT manufacturer.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the UniPhier System Cache binding to DT schema format.
This is a full-custom outer cache (L2 and L3) used on UniPhier
ARM 32-bit SoCs.
While I was here, I added the interrupts property. This is not
used in Linux, but the hardware has interrupt lines at least.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
In preparation to add generic checks of compatible strings, drop
the compatible as '...' is not a valid compatible string.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
This series makes room in the driver for differentiation between the
controllers which currently operate in TCFQ mode. Most of these are
actually capable of a lot more in terms of throughput. This is in
preparation of a second series which will convert the remaining users of
TCFQ mode altogether to XSPI mode with command cycling.
Vladimir Oltean (6):
doc: spi-fsl-dspi: Add specific compatibles for all Layerscape SoCs
spi: spi-fsl-dspi: Use specific compatible strings for all SoC
instantiations
spi: spi-fsl-dspi: Parameterize the FIFO size and DMA buffer size
spi: spi-fsl-dspi: LS2080A and LX2160A support XSPI mode
spi: spi-fsl-dspi: Support SPI software timestamping in all non-DMA
modes
spi: spi-fsl-dspi: Convert the instantiations that support it to DMA
.../devicetree/bindings/spi/spi-fsl-dspi.txt | 17 +-
drivers/spi/spi-fsl-dspi.c | 162 +++++++++++++-----
2 files changed, 128 insertions(+), 51 deletions(-)
--
2.17.1
Make the second compatible string optional for LS1012A, LS1088A and
LS2080A. Old versions of the spi-fsl-dspi.c driver still need to probe
on the old, generic compatible string for these controllers (such as
"fsl,ls1021a-v1.0-dspi") which provides less functionality.
Document the device tree bindings for LS1043A and LS1046A, whose
bindings are already in use in fsl-ls1043a.dtsi and fsl-ls1046a.dtsi.
Introduce new compatible strings for LS1028A and LX2160A. There will be
no second compatible string for these.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-2-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The PRUSS module has a SYSCFG which is unique. The SYSCFG
has two additional unique fields called STANDBY_INIT and
SUB_MWAIT in addition to regular IDLE_MODE and STANDBY_MODE
fields. Add the bindings for this new sysc type.
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
While converting to the json-schema, let's also take the opportunity to
further specify/clarify some more details about the DT binding.
For example, let's define the label where to put the states nodes, set a
pattern for nodename of the state nodes and finally add an example.
Fixes: a3f048b542 ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: drop type refs from standard unit properties]
Signed-off-by: Rob Herring <robh@kernel.org>
The arm,idle-state DT bindings recently got converted to the json-schema,
but some links are still pointing to the old, non-existing, txt file. Let's
update the links to fix this.
Fixes: baac82fe06 ("dt-bindings: arm: Convert arm,idle-state binding to DT schema")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
We created new bindings for the ARM Board using YAML
so delete the old human-parseable-only bindings.
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This implements the top-level schema for the ARM Versatile
Express and Juno platforms.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This implements the top-level schema for the ARM RealView
platforms.
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This implements the top-level schema for the ARM Versatile
platforms.
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This implements the top-level schema for the ARM Integrator
platforms.
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds bindings for the Qualcomm IPQ4019 VQMMC SD LDO driver.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Message-Id: <20200122134023.1467806-1-robert.marko@sartura.hr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that a new PHYs has been introduced for AXG SoC family, update
dt bindings documentation.
Please note that this breaks backward compatibility but as not a single
devicetree uses that yet that seems ok.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add documentation for the shared MIPI/PCIE analog PHY found in AXG
SoCs.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add documentation for PCIE PHYs found in AXG SoCs.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
- The compatible for Agilex GMAC should be "altr,socfpga-stmmac-a10-s10"
-----BEGIN PGP SIGNATURE-----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=VAHM
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_fix_for_v5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
arm64: dts: agilex: fix gmac compatible
- The compatible for Agilex GMAC should be "altr,socfpga-stmmac-a10-s10"
* tag 'socfpga_dts_fix_for_v5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (578 commits)
arm64: dts: socfpga: agilex: Fix gmac compatible
Linux 5.6-rc4
KVM: VMX: check descriptor table exits on instruction emulation
ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
macintosh: therm_windtunnel: fix regression when instantiating devices
jbd2: fix data races at struct journal_head
kvm: x86: Limit the number of "kvm: disabled by bios" messages
KVM: x86: avoid useless copy of cpufreq policy
KVM: allow disabling -Werror
KVM: x86: allow compiling as non-module with W=1
KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis
KVM: Introduce pv check helpers
KVM: let declaration of kvm_get_running_vcpus match implementation
KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter
MAINTAINERS: Correct Cadence PCI driver path
io_uring: fix 32-bit compatability with sendmsg/recvmsg
net: dsa: mv88e6xxx: Fix masking of egress port
mlxsw: pci: Wait longer before accessing the device after reset
sfc: fix timestamp reconstruction at 16-bit rollover points
vsock: fix potential deadlock in transport->release()
...
Link: https://lore.kernel.org/r/20200303153509.28248-1-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Add OSM L3 interconnect provider binding on SC7180 SoCs.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200227105632.15041-5-sibis@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add bindings for Operating State Manager (OSM) L3 interconnect provider
on SDM845 SoCs.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200227105632.15041-3-sibis@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The Qualcomm SC7180 platform has several bus fabrics that could be
controlled and tuned dynamically according to the bandwidth demand.
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1583241493-21212-2-git-send-email-okukatla@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Now that we have a separate rule for DT binding examples, we can customize
the dtc options. Let's adjust the dtc warnings to me more strict by
default so the examples get cleaned up as they get converted to schema.
Leaving 'avoid_unnecessary_addr_size' and 'graph_child_address' warnings
disabled as examples tend to be incomplete and they generates a lot of
warnings.
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Most folks only run dt_binding_check on the single schema they care about
by setting DT_SCHEMA_FILES. That means example is only checked against
that one schema which is not always sufficient.
Let's address this by splitting processed-schema.yaml into 2 files: one
that's always all schemas for the examples and one that's just the schema
in DT_SCHEMA_FILES for dtbs.
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Missing ';' in the end of secure-monitor example node.
Fixes: 165b5fb294 ("dt-bindings: power: add Amlogic secure power domains bindings")
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/1583164448-83438-1-git-send-email-jianxin.pan@amlogic.com
APF6 Dev compatible is armadeus,imx6dl-apf6dev and not
armadeus,imx6dl-apf6dldev.
Fixes: 3d735471d0 ("dt-bindings: arm: Document Armadeus SoM and Dev boards devicetree binding")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Some Allwinner SoCs like A83T and A64 contain rotate core which can
rotate and flip images.
Add a binding for it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add new entry for rc-videostrong-kii-pro in linux,rc-map-name
Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In UDMA each channel can use different ATYPE value which tells UDMA how
the addresses in the descriptors should be treated:
0: pointers are physical addresses (no translation)
1: pointers are intermediate addresses (PVU)
2: pointers are virtual addresses (SMMU)
When virtualized environment is used then the dma binding should use
additional cell to configure the desired ATYPE for the channel.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200218143126.11361-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add data-mapping property that can be used to specify
the media format used for the connection betwwen the
display controller (connector) and the panel.
v2:
- drop lvds666 (Rob)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200216181513.28109-5-sam@ravnborg.org
With panel-timing converted, now convert the single
remaining .txt user in panel/ of panel-timing to DT schema.
v2:
- Drop Thierry as maintainer, as this is not a general panel binding
and I have no acks.
- Drop requirement for a panel- specific binding - "panel-dpi" is enough
- Updated example
v3:
- added yaml document terminator "..."
- always require a specific binding - panel-dpi (based on feedback from Rob)
- use "power-supply" for the supply property, and made it mandatory
"power-supply" is the standard property for panels
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200216181513.28109-4-sam@ravnborg.org
Add display-timings.yaml - that references panel-timings.yaml.
display-timings.yaml will be used for display bindings
when they are converted to meta-schema format.
For now the old display-timing.txt points to the new
display-timings.yaml - and all users are left as-is.
v2:
- Updated native-mode description
v3:
- Simpler "^timing" pattern (Rob)
- timing node is of type object (Rob)
- added display-timings to panel-common.yaml
- added yaml document terminator "..."
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Cc: devicetree@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200216181513.28109-3-sam@ravnborg.org
Add meta-schema variant of panel-timing and
reference it from panel-common.yaml.
Part of this came form other files with other
licenses - original commits:
commit cc3f414cf2 ("video: add of helper for display timings/videomode")
commit 86f46565df ("dt-bindings: display: display-timing: Add property to configure sync drive edge")
commit 9cad9c95d7 ("Documentation: DocBook DRM framework documentation")
The original authors acked the license change to:
(GPL-2.0-only OR BSD-2-Clause)
v2:
- Got OK from original authors for re-license
Huge thanks for the quick replies!
- Typo fixes (Oleksandr)
- Drop -array variant when not needed (Maxime)
- Replace oneOf:... with enum (Maxime)
- Drop type from clock-frequency (Rob)
- Drop "|" when not needed (Rob)
v3:
- Added comment to acks that are only for the license change
- Add yaml document terminator "..."
- Updated description (removed reference to native-mode)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [license change]
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [license change]
Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> [license change]
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> [license change]
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200216181513.28109-2-sam@ravnborg.org
This adds device tree bindings for the Novatek NT35510-based
family of panels. Since several such panels are in existence
we define bindings common for all, and define the compatible
string for one certain panel (Hydis HVA40WV1).
As other panels are discovered and investigated, we can add
more compatibles to the binding using oneOf constructions.
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200223121841.26836-2-linus.walleij@linaro.org
Fix all the warnings in the DT binding schema examples when built with
'W=1'. This is in preparation to make that the default for examples.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Renesas Advanced Power Management Unit Device Tree binding
documentation to json-schema.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Renesas R-Car System Controller Device Tree binding
documentation to json-schema.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Rob Herring <robh@kernel.org>
Redefine the Network-on-Chip devices to more accurately describe
the interconnect topology on Qualcomm's SDM845 platform. Each
interconnect device can communicate with different instances of the
RPMh hardware which are described as RSCs(Resource State Coordinators).
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200209183411.17195-4-sibis@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add YAML schemas for interconnect bcm-voters found on QCOM RPMh-based
SoCs.
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200209183411.17195-3-sibis@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Convert the qcom,sdm845 interconnect provider binding to DT schema.
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200209183411.17195-2-sibis@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The mptcp conflict was overlapping additions.
The SMC conflict was an additional and removal happening at the same
time.
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=8Bsc
-----END PGP SIGNATURE-----
Merge tag 'tee-amdtee-fix-for-5.6' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Fix AMDTEE memory leak in amdtee_open_session()
* tag 'tee-amdtee-fix-for-5.6' of https://git.linaro.org/people/jens.wiklander/linux-tee: (344 commits)
tee: amdtee: fix memory leak in amdtee_open_session()
Linux 5.6-rc2
ext4: improve explanation of a mount failure caused by a misconfigured kernel
Input: cyapa - replace zero-length array with flexible-array member
Input: tca6416-keypad - replace zero-length array with flexible-array member
Input: gpio_keys_polled - replace zero-length array with flexible-array member
IB/mlx5: Use div64_u64 for num_var_hw_entries calculation
nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info
nvme/pci: move cqe check after device shutdown
nvme: prevent warning triggered by nvme_stop_keep_alive
nvme/tcp: fix bug on double requeue when send fails
cifs: make sure we do not overflow the max EA buffer size
cifs: enable change notification for SMB2.1 dialect
netdevice.h: fix all kernel-doc and Sphinx warnings
net: dsa: tag_ar9331: Make sure there is headroom for tag
net: dsa: tag_qca: Make sure there is headroom for tag
net, ip6_tunnel: enhance tunnel locate with link check
net/smc: no peer ID in CLC decline for SMCD
net/smc: transfer fasync_list in case of fallback
net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()
...
Link: https://lore.kernel.org/r/20200227165205.GA7926@jade
Signed-off-by: Olof Johansson <olof@lixom.net>
After transitioning to YAML DT schema we don't need this old-style
document.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Call it "pocketbook".
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
