mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
bc811c697b
1341 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Florian Fainelli
|
bc811c697b |
dt-bindings: Add documentation for Broadcom Hurricane 2 SoCs
Add binding documentation for the Broadcom Hurricane 2 SoCs used in switching control planes. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> |
||
|
Linus Torvalds
|
e90937e756 |
ARM: arm64: Devicetree updates for v4.14
As usual, device tree updates is the bulk of our material in this merge
window. This time around, 559 patches affecting both 32- and 64-bit
platforms.
Changes are too many to list individually, but some of the larger ones:
New platform/SoC support:
- Automotive:
+ Renesas R-Car D3 (R8A77995)
+ TI DT76x
+ MediaTek mt2712e
- Communication-oriented:
+ Qualcomm IPQ8074
+ Broadcom Stingray
+ Marvell Armada 8080
- Set top box:
+ Uniphier PXs3
Besides some vendor reference boards for the SoC above, there are also several
new boards/machines:
- TI AM335x Moxa UC-8100-ME-T open platform
- TI AM57xx Beaglebone X15 Rev C
- Microchip/Atmel sama5d27 SoM1 EK
- Broadcom Raspberry Pi Zero W
- Gemini-based D-Link DIR-685 router
- Freescale i.MX6:
+ Toradex Apalis module + Apalis and Ixora carrier boards
+ Engicam GEAM6UL Starter Kit
- Freescale i.MX53-based Beckhoff CX9020 Embedded PC
- Mediatek mt7623-based BananaPi R2
- Several Allwinner-based single-board computers:
+ Cubietruck plus
+ Bananapi M3, M2M and M64
+ NanoPi A64
+ A64-OLinuXino
+ Pine64
- Rockchip RK3328 Pine64/Rock64 board support
- Rockchip RK3399 boards:
+ RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
+ Theobroma Systems RK3399-Q7 SoM
- ZTE ZX296718 PCBOX Board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZtdtjAAoJEIwa5zzehBx3PzgP/iCQyUk5wklG9E5YNl8a9m/o
djBkelabTm52s5ZTu6Awsq5rx8jUMqcb0vo+9v9yPWFG6On2oTZyZ/rE1Wbj3+gG
+ENVyRgxmzYDTXqQLiu1UOV9wSA0gHwQCRZvE7i32NNfLu+tAsvu9e/AuznQ1xhR
4G7dGCRRlRkZkrVKrJ7JjklmW578pFQkZLmz8K2nWqwh1tKpK3fY19SrwUKx+YCR
tnMPYAPjB5zxR9tfcDS4FUKdiC7dMiMzZNGiYl5a26X6wsNR7xYtNzFMaGZn1ecG
PwOS+DAnj8J+AfpQBLWu9xytHbJdqITRuNcF+OXNVW9TKmb0syf7VgRUDkhjIMxP
aGZc4Q6PwgTRwnX+w6fTzJTyk+uXtieCicZaaZ1jlgcQq0pfbzJ1vZMpq4aoVlxU
mS84i1bd8AiavmHuyIRNB3/T4aAsVhTUIBndXluKV8yWroXhAukfI1YmGr1Eux7C
fy5pPeDqk9lXR3bqIhfnaLoVsApEXTOWMC8X48vwfaQHiCGR9JJwpfsGcaNi1bri
Col1qRzkXWGA6KqTWtpo+o12rYuMGc0mpZTCmejKuBoxMXOU+wLyJYgaxa7pyesX
S5rLaIe2l9ppXHjjEERp7AzczzLS5W20Tez5vYnZAQb1dYuJzwXwiATt8NT+XG3V
Wu92UwUfjxYk8vGz48ph
=R45j
-----END PGP SIGNATURE-----
Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 Devicetree updates from Olof Johansson:
"As usual, device tree updates is the bulk of our material in this
merge window. This time around, 559 patches affecting both 32- and
64-bit platforms.
Changes are too many to list individually, but some of the larger
ones:
New platform/SoC support:
- Automotive:
+ Renesas R-Car D3 (R8A77995)
+ TI DT76x
+ MediaTek mt2712e
- Communication-oriented:
+ Qualcomm IPQ8074
+ Broadcom Stingray
+ Marvell Armada 8080
- Set top box:
+ Uniphier PXs3
Besides some vendor reference boards for the SoC above, there are also
several new boards/machines:
- TI AM335x Moxa UC-8100-ME-T open platform
- TI AM57xx Beaglebone X15 Rev C
- Microchip/Atmel sama5d27 SoM1 EK
- Broadcom Raspberry Pi Zero W
- Gemini-based D-Link DIR-685 router
- Freescale i.MX6:
+ Toradex Apalis module + Apalis and Ixora carrier boards
+ Engicam GEAM6UL Starter Kit
- Freescale i.MX53-based Beckhoff CX9020 Embedded PC
- Mediatek mt7623-based BananaPi R2
- Several Allwinner-based single-board computers:
+ Cubietruck plus
+ Bananapi M3, M2M and M64
+ NanoPi A64
+ A64-OLinuXino
+ Pine64
- Rockchip RK3328 Pine64/Rock64 board support
- Rockchip RK3399 boards:
+ RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
+ Theobroma Systems RK3399-Q7 SoM
- ZTE ZX296718 PCBOX Board"
* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
ARM: dts: at91: at91sam9g45: add AC97
arm64: dts: marvell: mcbin: enable more networking ports
arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
arm64: dts: marvell: add TX interrupts for PPv2.2
arm64: dts: uniphier: add PXs3 SoC support
ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
ARM: dts: uniphier: fix size of sdctrl nodes
ARM: dts: uniphier: add AIDET nodes
arm64: dts: uniphier: fix size of sdctrl node
arm64: dts: uniphier: add AIDET nodes
Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
arm64: dts: uniphier: add reset controller node of analog amplifier
arm64: dts: marvell: add Device Tree files for Armada-8KP
arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
dt-bindings: add rk3399-q7 SoM
ARM: dts: rockchip: enable usb for rv1108-evb
ARM: dts: rockchip: add usb nodes for rv1108 SoCs
dt-bindings: update grf-binding for rv1108 SoCs
ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
...
|
||
|
Linus Torvalds
|
ae46654bcf |
ARM: SoC driver updates for v4.14
This branch contains platform-related driver updates for ARM and ARM64.
Among them:
- Reset driver updates:
+ New API for dealing with arrays of resets
+ Make unimplemented {de,}assert return success on shared resets
+ MSDKv1 driver
+ Removal of obsolete Gemini reset driver
+ Misc updates for sunxi and Uniphier
- SoC drivers:
+ Platform SoC driver registration on Tegra
+ Shuffle of Qualcomm drivers into a submenu
+ Allwinner A64 support for SRAM
+ Renesas R-Car R3 support
+ Power domains for Rockchip RK3366
- Misc updates and smaller fixes for TEE and memory driver subsystems
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=yBzS
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"This branch contains platform-related driver updates for ARM and ARM64.
Among them:
- Reset driver updates:
+ New API for dealing with arrays of resets
+ Make unimplemented {de,}assert return success on shared resets
+ MSDKv1 driver
+ Removal of obsolete Gemini reset driver
+ Misc updates for sunxi and Uniphier
- SoC drivers:
+ Platform SoC driver registration on Tegra
+ Shuffle of Qualcomm drivers into a submenu
+ Allwinner A64 support for SRAM
+ Renesas R-Car R3 support
+ Power domains for Rockchip RK3366
- Misc updates and smaller fixes for TEE and memory driver
subsystems"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set
soc/tegra: fuse: Add missing semi-colon
soc/tegra: Restrict SoC device registration to Tegra
drivers: soc: sunxi: add support for A64 and its SRAM C
drivers: soc: sunxi: add support for remapping func value to reg value
drivers: soc: sunxi: fix error processing on base address when claiming
dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
bus: sunxi-rsb: Enable by default for ARM64
soc/tegra: Register SoC device
firmware: tegra: set drvdata earlier
memory: Convert to using %pOF instead of full_name
soc: Convert to using %pOF instead of full_name
bus: Convert to using %pOF instead of full_name
firmware: Convert to using %pOF instead of full_name
soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC
soc: mediatek: add header files required for MT7622 SCPSYS dt-binding
soc: mediatek: reduce code duplication of scpsys_probe across all SoCs
dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC
reset: uniphier: add analog amplifiers reset control
reset: uniphier: add video input subsystem reset control
...
|
||
|
Linus Torvalds
|
7f1b9be13a |
ARM/arm64: SoC platform updates for v4.14
This branch contains platform updates for 32- and 64-bit ARM,
including defconfig updates to enable new options, drivers and
platforms. There are also a few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=g8cF
-----END PGP SIGNATURE-----
Merge tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
contains platform updates for 32- and 64-bit ARM, including defconfig
updates to enable new options, drivers and platforms. There are also a
few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other
drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
DMA code"
* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
ARM: multi_v7_defconfig: make eSDHC driver built-in
arm64: defconfig: enable rockchip graphics
MAINTAINERS: Update Cavium ThunderX2 entry
ARM: config: aspeed: Add I2C, VUART, LPC Snoop
ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
ARM: davinci_all_defconfig: enable tinydrm and ST7586
arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
MAINTAINERS: update ARM/ZTE entry
soc: versatile: remove unnecessary static in realview_soc_probe()
ARM: Convert to using %pOF instead of full_name
ARM: hisi: Fix typo in comment
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add recently added crypto drivers as modules
arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
...
|
||
|
Linus Torvalds
|
74fee4e88f |
DeviceTree updates for 4.14:
- Convert more DT code to use of_property_read_* API.
- Improve DT overlay support when adding multiple overlays.
- Convert printk's to %pOF format specifiers. Most went via subsystem
trees, but picked up the remaining orphans.
- Correct unittests to use preferred "okay" for "status" property value.
- Add a KASLR seed property.
- Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa.
- Fix modalias buffer handling.
- Clean-up of include paths for building dtbs.
- Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10 devices.
- Add nvmem bindings for MediaTek MT7623 and MT7622 SoC.
- Add compatible string for Allwinner H5 Mali-450 GPU.
- Fix links to old OpenFirmware docs with new mirror on devicetree.org.
- Remove status property from binding doc examples.
-----BEGIN PGP SIGNATURE-----
iQItBAABCAAXBQJZsVkbEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcPWPhAA
gi3Ekc3680YE1iLnXHkDkZHmzE0KvzhIyHrzqIkoxtISfmboVdydMQFnAfyhPJA4
UA5vBKiL4uhWSpHglQpyY2ld+S9tym3IQrGEhEsHxf6njfQpkiNqVKsTYxGAmwxW
E5B6sFl5O4q9e84pnselFsmx6TI+SlmPrqbN7BiluqczeUu358QlF2x8GZuJDN35
cLJKZSeE/w2xLIRIpHUoh7My8/d3jJ/OxuqXFyt/f42BtGp++WganCQS5XR0dxSA
SMdzHhWDTqCKsih5/80vqVXpDBn8iX6NEx7zKprSRc3mTCNIWHG70m/tNAk6/FQR
gvMR3BJOiA0MOIO3M3qaJeVuFkJDixaXmwL0V/Qpuon+6EMdRIfgcVTScAXNnamP
IHmN7fzFYE9tNCzkQjEHkQtVxyQi+1CAM61dZQD1rwi4M2YZHmNxdfLj4ilRb+q8
2SDugUjz3tEdEzi6huKc5oGwqmJwLQmSlgP+VGcJnt6kotLy+PEdPK1cYWtwSKmp
p/xhbXZSCFcwCHXGbyGE6yOXX4DKaLD11KmAMlJ2zwphfvwE4v/azuLmOtviiYTS
23KGIEZJYwRP1QG/BwsjKhl7x37NeKKKHomryMVF3R7M0mf1VtcdSSYROirNi2+t
AZZSyXoK8E/Fx4hR1YHxJ3TX4aBkJ2rBi3+RgABXa10=
=IBAh
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
"There's a few orphans in the conversion to %pOF printf specifiers
included here that no one else picked up.
Summary:
- Convert more DT code to use of_property_read_* API.
- Improve DT overlay support when adding multiple overlays
- Convert printk's to %pOF format specifiers. Most went via subsystem
trees, but picked up the remaining orphans
- Correct unittests to use preferred "okay" for "status" property
value
- Add a KASLR seed property
- Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa
- Fix modalias buffer handling
- Clean-up of include paths for building dtbs
- Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10
devices
- Add nvmem bindings for MediaTek MT7623 and MT7622 SoC
- Add compatible string for Allwinner H5 Mali-450 GPU
- Fix links to old OpenFirmware docs with new mirror on
devicetree.org
- Remove status property from binding doc examples"
* tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits)
devicetree: Adjust status "ok" -> "okay" under drivers/of/
dt-bindings: Remove "status" from examples
dt-bindings: pinctrl: sh-pfc: Use generic node name
dt-bindings: Add vendor Mellanox
dt-binding: net/phy: fix interrupts description
virt: Convert to using %pOF instead of full_name
macintosh: Convert to using %pOF instead of full_name
ide: pmac: Convert to using %pOF instead of full_name
microblaze: Convert to using %pOF instead of full_name
dt-bindings: usb: musb: Grammar s/the/to/, s/is/are/
of: Use PLATFORM_DEVID_NONE definition
of/device: Fix of_device_get_modalias() buffer handling
of/device: Prevent buffer overflow in of_device_modalias()
dt-bindings: add amc6821, isl1208 trivial bindings
dt-bindings: add vendor prefix for Theobroma Systems
of: search scripts/dtc/include-prefixes path for both CPP and DTC
of: remove arch/$(SRCARCH)/boot/dts from include search path for CPP
of: remove drivers/of/testcase-data from include search path for CPP
of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered
iio: srf08: add device tree binding for srf02 and srf10
...
|
||
|
Olof Johansson
|
b884026a2b |
Merge branch 'next/dt64' into next/dt
* next/dt64: (233 commits) arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 arm64: dts: uniphier: add PXs3 SoC support arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes arm64: dts: uniphier: add reset controller node of analog amplifier arm64: dts: marvell: add Device Tree files for Armada-8KP arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM arm64: dts: rockchip: add rk3328-rock64 board arm64: dts: rockchip: add rk3328 pdm node ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names ARM64: dts: meson-gx: Add AO CEC nodes ARM64: dts: meson-gx: update AO clkc to new bindings arm64: dts: rockchip: add more rk3399 iommu nodes arm64: dts: rockchip: add rk3368 iommu nodes arm64: dts: rockchip: add rk3328 iommu nodes arm64: zynqmp: Add generic compatible string for I2C EEPROM ... |
||
|
Linus Torvalds
|
bafb0762cb |
Char/Misc drivers for 4.14-rc1
Here is the big char/misc driver update for 4.14-rc1.
Lots of different stuff in here, it's been an active development cycle
for some reason. Highlights are:
- updated binder driver, this brings binder up to date with what
shipped in the Android O release, plus some more changes that
happened since then that are in the Android development trees.
- coresight updates and fixes
- mux driver file renames to be a bit "nicer"
- intel_th driver updates
- normal set of hyper-v updates and changes
- small fpga subsystem and driver updates
- lots of const code changes all over the driver trees
- extcon driver updates
- fmc driver subsystem upadates
- w1 subsystem minor reworks and new features and drivers added
- spmi driver updates
Plus a smattering of other minor driver updates and fixes.
All of these have been in linux-next with no reported issues for a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1+Ew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl26wCgquufNylfhxr65NbJrovduJYzRnUAniCivXg8
bePIh/JI5WxWoHK+wEbY
=hYWx
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver update for 4.14-rc1.
Lots of different stuff in here, it's been an active development cycle
for some reason. Highlights are:
- updated binder driver, this brings binder up to date with what
shipped in the Android O release, plus some more changes that
happened since then that are in the Android development trees.
- coresight updates and fixes
- mux driver file renames to be a bit "nicer"
- intel_th driver updates
- normal set of hyper-v updates and changes
- small fpga subsystem and driver updates
- lots of const code changes all over the driver trees
- extcon driver updates
- fmc driver subsystem upadates
- w1 subsystem minor reworks and new features and drivers added
- spmi driver updates
Plus a smattering of other minor driver updates and fixes.
All of these have been in linux-next with no reported issues for a
while"
* tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits)
ANDROID: binder: don't queue async transactions to thread.
ANDROID: binder: don't enqueue death notifications to thread todo.
ANDROID: binder: Don't BUG_ON(!spin_is_locked()).
ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl
ANDROID: binder: push new transactions to waiting threads.
ANDROID: binder: remove proc waitqueue
android: binder: Add page usage in binder stats
android: binder: fixup crash introduced by moving buffer hdr
drivers: w1: add hwmon temp support for w1_therm
drivers: w1: refactor w1_slave_show to make the temp reading functionality separate
drivers: w1: add hwmon support structures
eeprom: idt_89hpesx: Support both ACPI and OF probing
mcb: Fix an error handling path in 'chameleon_parse_cells()'
MCB: add support for SC31 to mcb-lpc
mux: make device_type const
char: virtio: constify attribute_group structures.
Documentation/ABI: document the nvmem sysfs files
lkdtm: fix spelling mistake: "incremeted" -> "incremented"
perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file
nvmem: include linux/err.h from header
...
|
||
|
Rob Herring
|
4da722ca19 |
dt-bindings: Remove "status" from examples
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Olof Johansson
|
c78c4ec2f2 |
mvebu dt64 for 4.14 (part 3)
Add description for a new family SoC from Marvell: Armada-8KP. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAlmeipsACgkQCwYYjhRyO9UnEACcDuFAUJNT2eth5lYMHoHcvMLf x7QAnjqghjBpm7nYOutsYPY5gwz/YYC6 =+kES -----END PGP SIGNATURE----- Merge tag 'mvebu-dt64-4.14-3' of git://git.infradead.org/linux-mvebu into next/dt64 mvebu dt64 for 4.14 (part 3) Add description for a new family SoC from Marvell: Armada-8KP. * tag 'mvebu-dt64-4.14-3' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: add Device Tree files for Armada-8KP Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
940bf1d6f7 |
- mt7623: add mt7623n and mt7623a plattform
- add mt7623 based reference boards - mt7623: add usb3, ethernet, cpufreq, - Add banana-pi board - add mt6323 pmic - mt2701: add larb-id property to smi larb -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAlmVfAMXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00NzChAAnj/93phTJunguMQlmiLopPFq a6ojH7ETUom+cajkm+vrYoJgfltYi4ghVfJhjlqsUNIjKfdT8GcfH9Ic0ceOgJIJ d1ss1D5SVuvtDshhS4Ja6NP5oBXLjpvf3Mf5AIcOMkWw0d+dmPk4wJQ4WnyaWUdz 8RzN4i9JNdcvTuFLpq99gdJerS/sQ1oXAd1QzIcvKr4YFzdxE/RrBLOBVHxP6OpD N8/hIb2bVsS1vfaPsI/UeN19jpxTxMrttRYCt1PBVcwribifG+C+jQg9kJXnewaj J/3FoXQBtLwoSDDxZq/p5woDZhfDnsgAo0szmHbxVBdrKZWPvWxekneoc8uYnFI4 i9NVtpnPSVGzCxuHrEwOVWuS4okKgwEho6tqot8P7MzjwQ4v0ms9S3m/bJz55ZIf QCqnPHb4LMnwdkHhgI4oFgz5YjsC3pjsxcsEbC3VNyFx4qfbq8u9ZcjQWOUxPitF R+tlJVp0TJOJkOg2ZMAqaF0BYM7NeXmC2owKSM649k6/n/Mw44tLm8SGPTBPzq6n Iyxlf3vir+eGKhVfgOLhHd/3Yre1qPxcZ5KwwEJHo8f3alWUE4fCORtu2TWnaxhp 5dkt7j8QlNAoti7apo8eiN4srWSv2GZJNeR5gth0X9KNFzyKt/gIsIRQCf38UqbF NwMfgKXfcXGI6DOt7To= =yAoq -----END PGP SIGNATURE----- Merge tag 'v4.13-next-dts32' of https://github.com/mbgg/linux-mediatek into next/dt - mt7623: add mt7623n and mt7623a plattform - add mt7623 based reference boards - mt7623: add usb3, ethernet, cpufreq, - Add banana-pi board - add mt6323 pmic - mt2701: add larb-id property to smi larb * tag 'v4.13-next-dts32' of https://github.com/mbgg/linux-mediatek: arm: dts: mt7623: cleanup binding file arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2 arm: dts: mediatek: add larbid property for larb arm: dts: mt7623: fix mmc interrupt assignment arm: dts: mt2701: Add usb3 device nodes arm: dts: mt2701: Add ethernet device node arm: dts: mt7623: add clock-frequency to CPU nodes arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board arm: dts: mt7623: enable the nand device on the mt7623n nand rfb arm: dts: mt7623: enable the usb device on the mt7623n rfb arm: dts: mt7623: cleanup the mt7623n rfb uart nodes arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi arm: dts: mt7623: add mt6323.dtsi file dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC Platform dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards arm: dts: mt7623: fixup binding violation missing reset in ethernet node dt-bindings: net: mediatek: update documentation for reset signals Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Suzuki K Poulose
|
1c8859848d |
coresight replicator: Cleanup programmable replicator naming
The Linux coresight drivers define the programmable ATB replicator as
Qualcomm replicator, while this is designed by ARM. This can cause
confusion to a user selecting the driver. Cleanup all references to
make it explicitly clear. This patch :
1) Replace the compatible string for the replicator :
qcom,coresight-replicator1x => arm,coresight-dynamic-replicator
2) Changes the Kconfig symbol (since this is not part of any defconfigs)
CORESIGHT_QCOM_REPLICATOR => CORESIGHT_DYNAMIC_REPLICATOR
3) Improves the help message in the Kconfig.
4) Changes the name of the driver and the file :
coresight-replicator-qcom => coresight-dynamic-replicator
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Arnd Bergmann
|
e9a203a7cf |
3 new boards, the rk3328-based Rock64 from the Pine64-makers, the
Sapphire som+baseboard which is another evaluation board for Rocckhip customers and the rk3399-based som+baseboard from Austria-based Theobroma Systems, which interestingly is in a miniITX formfactor and provides a real PCIe x4 slot. New nodes include on rk3399 graphics (vops, hdmi, etc) and more iommus, on rk3328 iommus, pwm, thermal management, and sound as well as operating points and rk3368 got iommu nodes and cpu operating points. On existing boards firefly got operating points, the rk3328-evb got its pmic and gru boards got some sound-related fixes. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmdnagQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgSpBB/9v6flM/QtBVeXhR1tfrXIt3veUaiwiTwhg PIj6J7EJZCgA9TiHr4zcQzjCx581a9v1rUEpnhZyi7d/zrNurpJRYtBNcqfDS28Z kyL30gwf/y4nVAzgIODGMNRWe3+IETNCIRZ236cV7jr9HgKmHvA0qc2aMzjHPMCF XS9wPXgEW1kYIgKqzq1drAWY3iVB0W37KMX9HKVQfAlPcGu5jobk0lruQBZV0InH 8NR3NB9a7eknzPejmBO2ga0idS0oAc/eFQ8h2bHrxWVm1JO+2QDc7epxWCTmxBcP DLy+7tuQiXEFc25AM3QpW97pJuqDT+zeZXd/F5BK5uGnpH63SNbi =D65g -----END PGP SIGNATURE----- Merge tag 'v4.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64 Pull "second round of Rockchip dts64 changes for 4.14" from Heiko Stübner: 3 new boards, the rk3328-based Rock64 from the Pine64-makers, the Sapphire som+baseboard which is another evaluation board for Rocckhip customers and the rk3399-based som+baseboard from Austria-based Theobroma Systems, which interestingly is in a miniITX formfactor and provides a real PCIe x4 slot. New nodes include on rk3399 graphics (vops, hdmi, etc) and more iommus, on rk3328 iommus, pwm, thermal management, and sound as well as operating points and rk3368 got iommu nodes and cpu operating points. On existing boards firefly got operating points, the rk3328-evb got its pmic and gru boards got some sound-related fixes. * tag 'v4.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits) arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM arm64: dts: rockchip: add rk3328-rock64 board arm64: dts: rockchip: add rk3328 pdm node arm64: dts: rockchip: add more rk3399 iommu nodes arm64: dts: rockchip: add rk3368 iommu nodes arm64: dts: rockchip: add rk3328 iommu nodes arm64: dts: rockchip: Add basic cpu frequencies for RK3368 arm64: dts: rockchip: add rk805 node for rk3328-evb arm64: dts: rockchip: Assign mic irq to correct device for Gru arm64: dts: rockchip: init rk3399 vop clock rates arm64: dts: rockchip: Add pwm nodes for rk3328 arm64: dts: rockchip: Fix wrong rt5514 dmic delay property for Gru arm64: dts: rockchip: disable tx ipgap linecheck for rk3399 dwc3 arm64: dts: rockchip: remove num-slots property from rk3399-sapphire arm64: dts: rockchip: Enable tsadc module on RK3328 eavluation board arm64: dts: rockchip: add thermal nodes for rk3328 SoC arm64: dts: rockchip: add tsadc node for rk3328 SoC arm64: dts: rockchip: add rk3328 i2s nodes ... |
||
|
Hanna Hawa
|
bf32f2aeb2 |
arm64: dts: marvell: add Device Tree files for Armada-8KP
This commit adds the base Device Tree files for the Armada 8KPlus. The Armada 8KP SoCs include several hardware blocks, and this commit only adds support for the AP810 block, that contains the CPU core and basic peripherals. AP810 is a high-performance die, includes octal core application processor based ARMv8-A architecture, two standard high speed DDR4 interface, and GIC-600 interrupt controller. AP810 Built as part of Marvell’s MoChi AP family products. Armada-8080 (8KPlus family), include an AP810 block that contains the CPU core and basic peripherals. This commit creates the following hierarchy: * armada-ap810-ap0.dtsi - definitions common to AP810 * armada-ap810-ap0-octa-core.dtsi - description of the octa cores * armada-8080.dtsi - description of the 8080 SoC * armada-8080-db.dts - description of the 8080 board Signed-off-by: Hanna Hawa <hannah@marvell.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> |
||
|
Klaus Goger
|
68987f4494 |
dt-bindings: add rk3399-q7 SoM
RK3399-Q7 is a Qseven compatible system-on-module by Theobroma Systems. This adds the module and the EVK baseboard "Haikou" Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Heiko Stuebner
|
955bebde05 |
arm64: dts: rockchip: add rk3328-rock64 board
The ROCK64 is a credit card size 4K60P HDR Media Board Computer using the Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting up to 4GB 1600MHz LPDDR3 memory. It provides eMMC module socket, MicroSD Card slot, Pi-2 Bus, Pi-P5+ Bus, USB 3.0 and many others peripheral devices interface for makers to integrate with sensors and devices. The devicetree currently supports basic peripherals, with more to be added later on. Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Arnd Bergmann
|
1e95f2ca6e |
Second Round of Renesas ARM Based SoC DT Bindings Updates for v4.14
* Add RZ/G1M (r8a7743) binding to apmu driver This allows SMP to be supported on the RZ/G1M SoC * Add bindings for iW-RainboW-G22D-SODIMM RZ/G1E SODIMM development kit This is in preparation for adding DTS to support this hardware -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZlWDoAAoJENfPZGlqN0++u+IP/097qIrO8k05/G4pulox3N+H bRa8FF6UNQq5XIKy3I/jz19zNDo0FxnqF23kVaDzakrgS0A/B9cTL3k9XNEsPaty 1D5BOj4Dv53rpMJjXrVpaM54wRmdvVCk8VVHPwoduJgn9TTv6vOFa8TxN4L7aI6T pu/RjKOVN4V31b+0dENs0Uz4u/AEcpTfrjuzrVseO2zBfLnJHSRUnxXhnuCUC6qd db7xDVVvwhd6B0GuAzu2c0EBhXKO/C6epF5aqiGN0auZgeNcjT6EEOUpmhmQxFOm 9iURVNUtwUQPcqzHvJ4bJdLN0OltSIxiBySvd59YTu62v4gvBxfPS4HE1lx9B/F2 PWbQWX4s+38vB5qmZSznFDavVRYEUPdvjuk9OdkzhNyYyRVie010+qcqcdALB5rj ehB/3V0J+yr+7RfwNECiWSqZZWACZHtCsMXz1VK/AE8P9Ltr7IinvgJ/+6aRGONa BGOn5NTuTKh7fFrwJ64Pt8vcSjOHBXX4dMbQkENYQloYPjFY9ClkhMHsacG8kxdZ 27EXAZcFgSTLfWdbL6nzjRf5Np6JNn6CSSr7z/8Iw8KEPgj5D0MKSyVjHZPNyvbI U+SDDnXt99nDcZSifWzf/U4Vfhoe+cybfc2umz4OkjOTI6Ep8jRdrsEEf+xy+wmN 40ipe1aPB1oyqKR1AG44 =uw/C -----END PGP SIGNATURE----- Merge tag 'renesas-dt-bindings2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Second Round of Renesas ARM Based SoC DT Bindings Updates for v4.14" from Simon Horman: * Add RZ/G1M (r8a7743) binding to apmu driver This allows SMP to be supported on the RZ/G1M SoC * Add bindings for iW-RainboW-G22D-SODIMM RZ/G1E SODIMM development kit This is in preparation for adding DTS to support this hardware * tag 'renesas-dt-bindings2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: dt-bindings: apmu: Document r8a7743 support ARM: shmobile: document iW-RainboW-G22D SODIMM SOM Development Platform ARM: shmobile: document iW-RainboW-G22M-SM SODIMM System on Module |
||
|
Arnd Bergmann
|
3d12971ebd |
i.MX device tree updates for 4.14:
- A series from Andrew Lunn updating imx6-rdu2 board to enable
on-board Marvell switch support.
- A series from Jagan Teki updating imx6ul-isiot and imx6ul-geam to
enable audio card and FEC support.
- Add support for Toradex Ixora V1.1 and Apalis Evaluation Board
along with some cleanups.
- Enable DRM display support for imx6ul-evk and imx7d-sdb board.
- Add i.MX53 based Beckhoff CX9020 board support.
- Add GPMI NAND and APBH DMA devices for i.MX7 and enables NAND support
for imx7-colibri board.
- Enables the ADV7180 analog video decoder sensor connected to the
IMX6 IPU on various Gateworks Ventana boards.
- Minor updates on misc boards and some random cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZloV7AAoJEFBXWFqHsHzOeIAH/ieM8fZEeUHO9waD4aoQJulp
kQHbJFKlEaQrB/y9LVUmNae0w/dpOaf5k/NVtfLQAZQhMqN6Y9XFQA0fnUAgiNbs
fknQpL6VnrO7nGUDEbIUommrRDPEVN9SEiiPpLpD938QjUDxTAibb8++QQOHC/S6
NLQbYMvubDTaUXkOiRodLQU6U/RQ5Byzmu+ytuKjlB1la0OzMegebD/OMXZtgysx
hcEDVBIEZmQO1TPrl5p6IZjjdHs1ua4gfRLQWq1RPXECakHJuyCPKILibyRID15j
w0C+sTxP1uIN950VYzufrbLIdyheWHSrx0FZSWa7tnus8W+h8kBAUd6NxyHLiyU=
=0Cwx
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "i.MX device tree updates for 4.14" from Shawn Guo:
- A series from Andrew Lunn updating imx6-rdu2 board to enable
on-board Marvell switch support.
- A series from Jagan Teki updating imx6ul-isiot and imx6ul-geam to
enable audio card and FEC support.
- Add support for Toradex Ixora V1.1 and Apalis Evaluation Board
along with some cleanups.
- Enable DRM display support for imx6ul-evk and imx7d-sdb board.
- Add i.MX53 based Beckhoff CX9020 board support.
- Add GPMI NAND and APBH DMA devices for i.MX7 and enables NAND support
for imx7-colibri board.
- Enables the ADV7180 analog video decoder sensor connected to the
IMX6 IPU on various Gateworks Ventana boards.
- Minor updates on misc boards and some random cleanups.
* tag 'imx-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
ARM: dts: imx6q-bx50v3: Enable i2c recovery mechanism
ARM: dts: imx6q-apalis-eval: add support for Apalis Evaluation Board
ARM: dts: imx6: add support for Toradex Ixora V1.1 carrier board
ARM: dts: imx6qdl-apalis: imx6q-apalis-ixora: use i2c from dwc hdmi
ARM: dts: imx6q-apalis-ixora: add camera i2c bus definition
ARM: dts: imx6q-apalis-ixora: get rid of obsolete fusion comment
ARM: dts: imx6qdl-apalis: reword cam i2c comment
ARM: dts: imx6qdl-apalis: imx6q-apalis-ixora: get rid of tegra legacy gen1_i2c comment
ARM: dts: imx6q-apalis-ixora: combine aliases
ARM: dts: imx6qdl-apalis: split usdhc1 pinctrl to support 4- and 8-bit
ARM: dts: imx6q-apalis-ixora: fix usdhc2 pinctrl property
ARM: dts: imx6ul-liteboard: Support poweroff
ARM: dts: imx: add CX9020 Embedded PC device tree
ARM: dts: imx53: add alternative UART2 configuration
ARM: dts: imx53: add srtc node
dt-bindings: arm: Add entry for Beckhoff CX9020
ARM: dts: i.MX25: add RNGB node to dtsi
ARM: dts: imx6ul-14x14-evk: Remove unrelated pin from ENET group
ARM: dts: imx7d-sdb: Add flexcan support
ARM: dts: imx7-colibri: add NAND support
...
|
||
|
Arnd Bergmann
|
522a6efef2 |
This pull request contains Broadcom ARM-based SoCs Device Tree changes for
4.14, please pull the following: - Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance problem and would have required either duplication or cross merges - Stefan changes how the pinmuxing is defined and pushes it at the board level to support Raspberry Pi Zero Wireless. He then adds supports for the actual Raspberry Pi Zero Wireless board along with binding documentation. Stefan also defines a proper SMP enable-method property and binding for BCM2836 (Raspbery Pi 2) - Rafal describes the BCM5301X USB ports correctly in Device Tree such that it becomes possible to assign them to specific LED triggers (e.g: USB activity). He does the same thing for BCM53573 and defines default LED triggers for USB. - Jon provides a fix for Northstar Plus which consists in correctly defining the "dma-coherent" property for peripherals which are DMA coherent. He also does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY and host controller support for NorthStar Plus - Florian adds support for Broadcom's BCM947189ACDBMR reference board which is based on BCM47182/53573 and which supports external MoCA (BCM6802) - Ray fixes the wrong UART2 base address for Cygnus - Scott moves the v3d node in the proper unit address order and defines the correct UART alias for the BCM91130_entphn reference board to be UART3 - Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit - Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file: SDHCI, Keypad, SPI, DMA and pinmux configurations - Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJZldUgAAoJEIfQlpxEBwcEUIgQAIdyDJn+q+mxVhtY8m5xd7ru +pnSvzJoL0nNUALPez4SGRBSBsv8oH3zO77aLQcPEcy1W+FCvjGI3eh22bm5PkOO UASbrw5c5RfwYI/fVVkTqoZT3d4Xo4ZXTe+ML0wVS7x9Hw8ozQPBCc5hRJ7PQYaO U1Ttvpud354xgCFXnvtadDwwTa2W9MdPtsTkrk42Q+p06KZTlONUslAL+DI1RlUw Zf81r/93YzmEbsPpnG4nlW1dJTTILPE7AFQfJQ47Fg+aJ/suhYMlEH2EvxqgXhh0 FzAWd0Zo1p83chArSQdKGEkS+RvSGuSX1D1n1ZVMO2NJZd3RSqLVy6zUB38f+5Eu 0nOxwxWaG/isyGJ9DtMSyM7ZdgZhYSEI847DC3zOah3/kNquF/NmFFUOPzW79D53 WJ/qvjxYZ9fcy3p2W3Vk8LSNiBeiQGQ+zodpRjTrHIBocqQUf2yxSeepGV9zeHk8 ZwwUmtSE/qZd+MAqiki1DdUIWqHvkvOx0BbYZHLqA3ND2Vz6n6hVvMMMDo2+TyN7 WNhOdrM7Gwt+LNYyW6Gjrvxe5wIYn6Gw3+wPbxTSZH7lBbBC/c56cR0V3nJkpuiS C5OwCx1Miocz61GPjKtkaYat3cnRum96X5hsadTLJ/cNscNKdIXqUkPtZ6jLs7VI SbSQS4Im7fdGaGeRRsj1 =WUr3 -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-4.14/devicetree' of http://github.com/Broadcom/stblinux into next/dt Pull "Broadcom devicetree changes for 4.14" from Florian Fainelli: This pull request contains Broadcom ARM-based SoCs Device Tree changes for 4.14, please pull the following: - Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance problem and would have required either duplication or cross merges - Stefan changes how the pinmuxing is defined and pushes it at the board level to support Raspberry Pi Zero Wireless. He then adds supports for the actual Raspberry Pi Zero Wireless board along with binding documentation. Stefan also defines a proper SMP enable-method property and binding for BCM2836 (Raspbery Pi 2) - Rafal describes the BCM5301X USB ports correctly in Device Tree such that it becomes possible to assign them to specific LED triggers (e.g: USB activity). He does the same thing for BCM53573 and defines default LED triggers for USB. - Jon provides a fix for Northstar Plus which consists in correctly defining the "dma-coherent" property for peripherals which are DMA coherent. He also does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY and host controller support for NorthStar Plus - Florian adds support for Broadcom's BCM947189ACDBMR reference board which is based on BCM47182/53573 and which supports external MoCA (BCM6802) - Ray fixes the wrong UART2 base address for Cygnus - Scott moves the v3d node in the proper unit address order and defines the correct UART alias for the BCM91130_entphn reference board to be UART3 - Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit - Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file: SDHCI, Keypad, SPI, DMA and pinmux configurations - Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes * tag 'arm-soc/for-4.14/devicetree' of http://github.com/Broadcom/stblinux: ARM: BCM53573: Specify ports for USB LED for Tenda AC9 ARM: dts: cygnus: Add generic-ehci/ohci nodes ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn ARM: dts: cygnus: Add additional peripherals to dtsi ARM: dts: cygnus: Enable Performance Monitoring Unit ARM: dts: cygnus: place v3d in proper address ordered location ARM: dts: cygnus: Fix incorrect UART2 register base ARM: dts: bcm283x: Add 32-bit enable method for SMP dt-bindings: arm: add SMP enable-method for BCM2836 ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few devices ARM: dts: NSP: Add USB3 and USB3 PHY to NSP ARM: dts: NSP: Rearrage USB entries ARM: dts: NSP: Add dma-coherent to relevant DT entries ARM: dts: bcm2835: Add Raspberry Pi Zero W dt-bindings: bcm: Add Raspberry Pi Zero W ARM: bcm283x: Define UART pinmuxing on board level ARM: dts: BCM5301X: Specify USB ports for each controller ARM: dts: bcm283x: Move the BCM2837 DT contents from arm64 to arm. |
||
|
Arnd Bergmann
|
36d0f13881 |
- add SoC mt7622 and its reference board
- cleanup of dts bindings - mt6797: add watchdog and delete unused clock - add support for SoC mt2701 and it's eval board -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAlmVm7YXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00PSPRAAq0zY7T/9zwb2jF077aO8lgsM 1asY+PxC+NpvGohVtWGY+YN7BiGG+8pLAVhUwojEpT51/uwtdy0gtoUeZCJt5iaa 3X6jKkh3iy/QHqRfQE/NOSHgtADS2WsTLVGMOTMlEKmHLROlVTee7WIBTB6FyUzm syiXJC6c7J3UCq/yJUKBK3c8lBeuSLoRphAaLTz/VgyahPjh6OzFekcvnCAAmrt3 b0a2ByaCuvr8sSmJlbAHGPwkk8FJG1Q6TL1vQpkLNustmYrds2WmJuLH2ygppCtf hX15pGuGGQ22r+qIDzsCHY4fl85H/hReDBjLVa39KTf6hz3XiobYzVHSasmnPazb EhvCI0PPnfjfIxr2dX2s9nfZuhsSVvH1LifIsISbZk4OH8Zi1UW/aUjWzHSsH5X3 ohLeCYfTm+NQ4JQxs+KJrZpWLam8F8X6dwIM+yhi1iokA7xymhaSKM8/dGfnV6xz 623Ju8cTMMqXzd+Mm9So9As0NAJ49+ld7/NaDdnVRkT7Dj9c7YkiQBnyU42CsNR5 IP4vIuBPUkK/vypqpPAZPElUiaZriQyUDGCZj/HkwPp6J5Xo0WBqpeL4TuvM90FG 6WgUr55e5zquIoGHtDW9RyowW4T5KZzQJxoDYZomV+k9Ht2blpQWNVWCr4fbdU9I l683rnB3HdqCAamleKM= =xfCC -----END PGP SIGNATURE----- Merge tag 'v4.13-next-dts64' of https://github.com/mbgg/linux-mediatek into next/dt64 Pull "arm: mediatek: dts64 updates for v4.14" from Matthias Brugger: - add SoC mt7622 and its reference board - cleanup of dts bindings - mt6797: add watchdog and delete unused clock - add support for SoC mt2701 and it's eval board * tag 'v4.13-next-dts64' of https://github.com/mbgg/linux-mediatek: arm64: dts: Add Mediatek SoC MT2712 and evaluation board dts and Makefile dt-bindings: arm: Add bindings for Mediatek MT2712 SoC Platform arm64: dts: mediatek: Delete unused dummy clock for MT6797 arm64: dts: mediatek: add watchdog to MT6797 ARM: mediatek: dts: Add MT6797 binding ARM: mediatek: dts: Cleanup bindings documentation arm64: dts: mt7622: add dts file for MT7622 reference board variant 1 arm64: dts: mt7622: add basic nodes to the mt7622.dtsi file |
||
|
yt.shen@mediatek.com
|
c6f0f58a3f |
dt-bindings: arm: Add bindings for Mediatek MT2712 SoC Platform
This adds dt-binding documentation for Mediatek MT2712. Only include very basic items: cpu, gic and uart. Signed-off-by: YT Shen <yt.shen@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Fabrizio Castro
|
61c687e822 |
ARM: shmobile: document iW-RainboW-G22D SODIMM SOM Development Platform
Document the iW-RainboW-G22D device tree bindings. It is just a placeholder for the time being, the actual implementation is not available yet. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
|
Fabrizio Castro
|
9933924781 |
ARM: shmobile: document iW-RainboW-G22M-SM SODIMM System on Module
Document the iW-RainboW-G22M-SM SODIMM System on Module device tree bindings. It is just a placeholder for the time being, the actual implementation is not available yet. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
|
Arnd Bergmann
|
0ee72c9f25 |
Qualcomm Device Tree Changes for v4.14
* Fixup XO, timer nodes, and pinctrl on IPQ4019 * Add IPQ4019 RNG and wifi blocks * Update MSM8974 coresight node * Add IPQ8074 bindings -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZk7mLAAoJEFKiBbHx2RXVBIQP/iWqLPbfaad9LNyMH34dBGt5 pjWO2pQL4Q8ZAapkb9MpiyTmOXNTGAiEjbdVxR899Rr8pfZk80dtTi9ooVFBjIk+ cHlOGPSg8gnaLitDZrKc/zzkUBgVbZo5TrnF6vBl/CpT/2acPVlWxI2FLOhtRlYZ wCBT5OxqvOywyT6cs4x8nAHS2Bb+akGtcBoMI8fBVzyzn+uo1gV4c+5R2HcbqK8m Akb2cYFNV4LcgZa6KTK81FjYc9YNxyy76MeJjxbIt6A6Na0A2Hk2DWqsiMB+uUUc ijk8GnZvjQswYDI+A2gPFeXULLa4WzBJRhbYOz7m/nCM6CYtmM0gsxn65GCQbPcx 5BDOhWeuJl8o6J2EDkMFua532/5k0DGbRV34xuxg2haxF9u3XNfb24TSevTJGgPc PICgkUk8mJXwQ2MjT00LeWj9tRGcK2U8BN/pghbElAF6haUkd9Sy5F4mLn6Q8oWQ auXqaZ1h4d1x2aUf4puTP19+1Zzccl1Ay/jJJCZVqYjJlh/+wL9qniEp3gzXLhk/ +VL0rhQrYagPbcIOlJPeOBDzXsoneebYNl34YmykRL6oBhJCp/OaW1G4ESpYHc17 TmN04dBPqTZb42pEgiWM4hu9y4tJ5jTWC7T7y8rbE9bGzVHhrDcEhH7QoMhLrMmM MAK0xt6x3OPbZ51xFVFM =X0uy -----END PGP SIGNATURE----- Merge tag 'qcom-dts-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Pull "Qualcomm Device Tree Changes for v4.14" from Andy Gross: * Fixup XO, timer nodes, and pinctrl on IPQ4019 * Add IPQ4019 RNG and wifi blocks * Update MSM8974 coresight node * Add IPQ8074 bindings * tag 'qcom-dts-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: qcom: add and enable both wifi blocks on the IPQ4019 ARM: dts: qcom-msm8974: dts: Update coresight replicator ARM: dts: qcom: add pseudo random number generator on the IPQ4019 ARM: dts: ipq4019: Move xo and timer nodes to SoC dtsi ARM: dts: ipq4019: Fix pinctrl node name dt-bindings: qcom: Add IPQ8074 bindings |
||
|
Arnd Bergmann
|
146d8cd929 |
Device tree changes for omaps for v4.14 merge window:
- A series of changes for dra7 and am572 to use generic MMC vqmmc regulator - Clean-up tps65217 internal interrupts to define them only in tps65217.dtsi - Add dra7 iodelay pinctrl driver configuration - Add buzzer support for am437x-gp-evm - Disable HDMI CEC internal pull-ups as it seems that all boards have an external pull for these - Remove unnecessary interrupt-parent for omap3 - Configure droid 4 vaudio regulator initial mode and add vibrator - Enable NAND dma prefetch for am335x-evm, am437x and dra7 - Add pcie1 dt node for EP mode for am57x and dra7 - Add support for new dra76x SoCs and dra76x-evm -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlmTJfQRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXNA1A/+MLAg3q4K9IKWGTXbus9yBoKk8w2WFbSs Yz/tzzOaNNhXdv3JdXh3f8O8wpID8LnxSblM001olks7Q9KSHMSyd0MUm4SgEQk2 hyFnEZU3e1eAe86LEDMTJNnKLLdCx3+RZHLvaRy3iHVIWBVZQmwD4l5daCt6iA0N Yoy77MHkgJ0hnFrvcXr3e5+UzZR4g0JvS0T63sEQ5FbX6Uf4NTp67ubTYN3d/Zb9 E+GhPiNsOPeecVzDZR/C1eT7xasBf7qEl9qfJlglVPV8cVsZ6FUzsQb/aYixKaO2 fw1spQ3dpG9Scoi1AlU8AjapZXq8ocwS57L4kXRzlkm8ce6fj8a0aChX3jGKJMNx RPdfjRRUOjvQt5Jg1VCh1J3Rr6xtQv05fkcowHfyVrhVxIa/mlnFv2qIb6N4u+Ra nXIYTiBxxwHeiy/nwz+mjcvbOe12Jj9E7DAidrxxr/cpNeRbZMz9w5vI2rJ3sUbK +DYWTVMhE0+TYZIFNPRM8tEyem/3omrpIQyM2K4IYk/E2b0aMF6UXlJP+i8dvL8o 01Ad2Gzr/Z9seD0YrhYJVM+LmR/qOn/10gKmtznOKM2trGxb4suq3mdSx/RMmneC gGl0ltudVh0s1jWts/51H+BDYZ2J3DbJRDJAahIAkVEBfQCl6LRjyO4goi+SCaLq z8out2VsHA0= =zikX -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.14/dt-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "Device tree changes for omaps for v4.14 merge window" from Tony Lindgren: - A series of changes for dra7 and am572 to use generic MMC vqmmc regulator - Clean-up tps65217 internal interrupts to define them only in tps65217.dtsi - Add dra7 iodelay pinctrl driver configuration - Add buzzer support for am437x-gp-evm - Disable HDMI CEC internal pull-ups as it seems that all boards have an external pull for these - Remove unnecessary interrupt-parent for omap3 - Configure droid 4 vaudio regulator initial mode and add vibrator - Enable NAND dma prefetch for am335x-evm, am437x and dra7 - Add pcie1 dt node for EP mode for am57x and dra7 - Add support for new dra76x SoCs and dra76x-evm * tag 'omap-for-v4.14/dt-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits) ARM: dts: nokia n900: update dts with camera support ARM: dts: Add support for dra76-evm ARM: dts: Add support for dra76x family of devices ARM: dts: DRA7: Add pcie1 dt node for EP mode ARM: dts: am335x: add support for Moxa UC-8100-ME-T open platform ARM: dts: dra7xx: Enable NAND dma prefetch by default ARM: dts: am437xx: Enable NAND dma prefetch by default ARM: dts: am335x-evm: Enable NAND dma prefetch by default ARM: dts: omap4-droid4: Add vibrator ARM: dts: motorola-cpcap-mapphone: set initial mode for vaudio ARM: dts: omap3: Remove needless interrupt-parent property ARM: dts: Disable HDMI CEC internal pull-ups ARM: dts: am437x-gp-evm: Add support for buzzer ARM: dts: Add dra7 iodelay configuration ARM: dts: tps65217: Add power button interrupt to the common tps65217.dtsi file ARM: dts: tps65217: Add charger interrupts to the common tps65217.dtsi file ARM: dts: omap*: Replace deprecated "vmmc_aux" with "vqmmc" ARM: dts: am572x-idk: Fix GPIO polarity for MMC1 card detect ARM: dts: am571x-idk: Fix GPIO polarity for MMC1 card detect ARM: dts: dra7: Add "max-frequency" property to MMC dt nodes ... |
||
|
Lokesh Vutla
|
895bd4b3e5 |
ARM: dts: Add support for dra76-evm
dra76-evm is a board based on TI's dra76 processor targeting for infotainment systems. Adding support for this platform. dra76-evm and dra7-evm has a similar layout except with few differences. So create a dra7-evm-common.dtsi with similarities on dra76-evm and dra7-evm. Include this common dtsi in both dra7-evm.dts and dra76-evm.dts Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
|
SZ Lin
|
5e45286595 |
ARM: dts: am335x: add support for Moxa UC-8100-ME-T open platform
Add support for Moxa UC-8100-ME-T open platform The UC-8100-ME-T computing platform is designed for embedded data acquisition industrial applications The features of UC-8100-ME-T series are: * eMMC * SPI flash * SD slot * 2x LAN * 2 RS-232/422/485 ports, software-selectable * Mini PCIe form factor with USB signal * USB host * EEPROM * TPM * Watchdog * RTC * User gpio-keys * User LEDs * User button Signed-off-by: SZ Lin <sz.lin@moxa.com> Acked-by: Rob Herring <robh@kernel.org> [tony@atomide.com: fix unit adress as suggested by Rob] Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
|
Stefan Wahren
|
da26718ed6 |
dt-bindings: arm: add SMP enable-method for BCM2836
This adds a compatible string "brcm,bcm2836-smp" for Broadcom's BCM2836 and BCM2837 to the 32 bit ARM CPU device tree binding. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Rob Herring <robh@kernel.org> |
||
|
Lokesh Vutla
|
4dc6760d3d |
ARM: OMAP2+: board-generic: add support for dra762 family
Adding board generic support for dra762 family. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
|
Julien Thierry
|
e884f80cf2 |
arm64: perf: add support for Cortex-A35
The Cortex-A35 uses some implementation defined perf events. The Cortex-A35 derives from the Cortex-A53 core, using the same event mapings based on Cortex-A35 TRM r0p2, section C2.3 - Performance monitoring events (pages C2-562 to C2-565). Signed-off-by: Julien Thierry <julien.thierry@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Julien Thierry
|
5561b6c5e9 |
arm64: perf: add support for Cortex-A73
The Cortex-A73 uses some implementation defined perf events. This patch sets up the necessary mapping for Cortex-A73. Mappings are based on Cortex-A73 TRM r0p2, section 11.9 Events (pages 11-457 to 11-460). Signed-off-by: Julien Thierry <julien.thierry@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Varadarajan Narayanan
|
e099febc8e |
dt-bindings: qcom: Add IPQ8074 bindings
This patch adds the IPQ8074 and related boards to the QCOM bindings. Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org> |
||
|
Jacob Chen
|
0a3c78e251 |
arm64: dts: rockchip: Add support for rk3399 excavator main board
Add support for the rk3399 excavator main board. This board works in a combination with the sapphire SOM. This board have been sold as the rk3399 evaluation board for commercial customers. You can get more info from below link: http://opensource.rock-chips.com/wiki_Excavator_sapphire_board Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Patrick Bruenn
|
87a7da04c9 |
dt-bindings: arm: Add entry for Beckhoff CX9020
- add vendor prefix bhf for Beckhoff - add new board binding bhf,cx9020 Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Stefan Wahren
|
79c2a9d33a |
dt-bindings: bcm: Add Raspberry Pi Zero W
This adds the root properties for the Raspberry Pi Zero W. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Eric Anholt <eric@anholt.net> |
||
|
Kevin Hilman
|
7e8634e821 |
dt-bindings: amlogic: add unstable statement
Due to the lack of documentation on this SoC family, discovery of new features, and correcting of previous misunderstandings is expected, so it's unrealistic to expect any form of stable bindings for this SoC family. Make that clear inthe binding documentation. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
||
|
Sean Wang
|
f4ff257cd1 |
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from BIPAI KEJI. Detailed hardware information for BPI-R2 which could be found on http://www.banana-pi.org/r2.html The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP table and thermal zone treating CPU as one of cooling devices and also added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART, SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing hardware and peripherals, they would be added and integrated continuously. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Sean Wang
|
8de0e989a3 |
dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC Platform
This adds DT binding documentation for Mediatek MT7623a Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Sean Wang
|
5c45852256 |
dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards
Because there are two versions of MT7623 SoC that is MT7623a and MT7623n respectively. So update the part of MT7623n bindings to allow that people tend to differentiate which MT7623 SoC the boards applies. And "mediatek,mt7623-evb" can be safely changed to "mediatek,mt7623n-rfb-nand" because mt7623-evb is a kind of debug board internally in Mediatek which real users can't get. So instead we should indicate which variants it belongs to with more specific postfix as the adding here to let people easily know what board they use. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Neil Armstrong
|
9833eb16c1 |
dt-bindings: arm: amlogic: Add SoC information bindings
Add bindings for the SoC information register of the Amlogic SoCs. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
||
|
Geert Uytterhoeven
|
100acb0bd9 |
ARM: shmobile: Document Renesas Draak board DT bindings
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
|
Geert Uytterhoeven
|
f03783efc4 |
ARM: shmobile: Document R-Car D3 SoC DT bindings
Note that r8a77995 is the first Renesas "r8a<n>" SoC matching against a 5 digit number, as r8a77990 will be a different SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
|
Linus Torvalds
|
dddd564dbb |
This time we've got one core change to introduce a bulk clk_get API,
some new clk drivers and updates for old ones. The diff is pretty
spread out across a handful of different SoC clk drivers for Broadcom, TI,
Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to the
introduction of new drivers.
Core:
- New clk bulk get APIs
- Clk divider APIs gained the ability to consider a different parent than
the current one
New Drivers:
- Renesas r8a779{0,1,2,4} CPG/MSSR
- TI Keystone SCI firmware controlled clks and OMAP4 clkctrl
- Qualcomm IPQ8074 SoCs
- Cortina Systems Gemini (SL3516/CS3516)
- Rockchip rk3128 SoCs
- Allwinner A83T clk control units
- Broadcom Stingray SoCs
- CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs
Removed Drivers:
- Old non-DT version of the Realview clk driver
Updates:
- Renesas Kconfig/Makefile cleanups
- Amlogic CEC EE clk support
- Improved Armada 7K/8K cp110 clk support
- Rockchip clk id exposing, critical clk markings
- Samsung converted to clk_hw registration APIs
- Fixes for Samsung exynos5420 audio clks
- USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for hi3660
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Yar+
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This time we've got one core change to introduce a bulk clk_get API,
some new clk drivers and updates for old ones. The diff is pretty
spread out across a handful of different SoC clk drivers for Broadcom,
TI, Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to
the introduction of new drivers.
Core:
- New clk bulk get APIs
- Clk divider APIs gained the ability to consider a different parent
than the current one
New Drivers:
- Renesas r8a779{0,1,2,4} CPG/MSSR
- TI Keystone SCI firmware controlled clks and OMAP4 clkctrl
- Qualcomm IPQ8074 SoCs
- Cortina Systems Gemini (SL3516/CS3516)
- Rockchip rk3128 SoCs
- Allwinner A83T clk control units
- Broadcom Stingray SoCs
- CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs
Removed Drivers:
- Old non-DT version of the Realview clk driver
Updates:
- Renesas Kconfig/Makefile cleanups
- Amlogic CEC EE clk support
- Improved Armada 7K/8K cp110 clk support
- Rockchip clk id exposing, critical clk markings
- Samsung converted to clk_hw registration APIs
- Fixes for Samsung exynos5420 audio clks
- USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for
hi3660"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (147 commits)
clk: gemini: Read status before using the value
clk: scpi: error when clock fails to register
clk: at91: Add sama5d2 suspend/resume
gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K
clk: keystone: TI_SCI_PROTOCOL is needed for clk driver
clk: samsung: audss: Fix silent hang on Exynos4412 due to disabled EPLL
clk: uniphier: provide NAND controller clock rate
clk: hisilicon: add usb2 clocks for hi3798cv200 SoC
clk: Add Gemini SoC clock controller
clk: iproc: Remove __init marking on iproc_pll_clk_setup()
clk: bcm: Add clocks for Stingray SOC
dt-bindings: clk: Extend binding doc for Stingray SOC
clk: mediatek: export cpu multiplexer clock for MT8173 SoCs
clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCs
clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work
clk: renesas: cpg-mssr: Use of_device_get_match_data() helper
clk: hi6220: add acpu clock
clk: zx296718: export I2S mux clocks
clk: imx7d: create clocks behind rawnand clock gate
clk: hi3660: Set PPLL2 to 2880M
...
|
||
|
Linus Torvalds
|
dd6ec12f3b |
DeviceTree for 4.13:
- vsprintf format specifier %pOF for device_node's. This will enable us to stop storing the full node names. Conversion of users will happen next cycle. - Update documentation to point to DT specification instead of ePAPR. - Split out graph and property functions to a separate file. - New of-graph functions for ALSA - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull, Itead, and BananaPi. - Improve dtx_diff utility filename printing. -----BEGIN PGP SIGNATURE----- iQItBAABCAAXBQJZXpNsEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcO2gg// VxhXDs6+oTkBCUzVtEHue/yv44q8Sa7M3jY3/VqVSLa3Eopp/4dmDgBAtWYYX2ou KfUl0+yD4cSKhw6oxycwsaS61zf8JkM4sbXYQTphty/5lwxq0/i3OGj98Uk9w9JH kM+b1Wi7Z6GBzqh1GuS4E+ADSktMadxd0LugXZvDEMVQZusv/nzWxzq/bdMUqW19 0nvBL9ABRAPirhBuMSWpYlEEkwQn7JF3LO3i8IBDhhFzMsvbfR7cTp+ydt6I2pk8 h8DxlsaPIOWH5KePNEmzsd1VlV/HcNl7/vZb0ev0Eb94TLHJRJ7V0ZMQxc5vxHgN x6aMlBLHGzG6LI5CV30pWAD/qrrtXNbqmlj1Qjd+FXen6NuQSngSfo5aXzXrM6X5 ZUD7ou9KzYObraOarU6w2qSICok85bGQHOiBQDVTmE4E/4AVscnc1VQi/rTHrt2O Yt3AV8iwaum8q2PVOVKdy8tu7x/7BzBdSObYtjjMIuWcrInnlIyUkmehtCl38kqV fd6OIVEOhTJTr0CYDiXEbKtG81j7JhoREdVZvzcEhWFGt/98Rjc9tkTihhFzky4m D6lpzpf8mvemrBiMegyQbhVcfHyo0fJe+6giV7cssf2Xhe1QkC15UXywbccO7xFJ nf3yqCl8YVEPG0l1MrR+YEHHcnr4ZIEZpejOv+SzZeg= =DNwf -----END PGP SIGNATURE----- Merge tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - vsprintf format specifier %pOF for device_node's. This will enable us to stop storing the full node names. Conversion of users will happen next cycle. - Update documentation to point to DT specification instead of ePAPR. - Split out graph and property functions to a separate file. - New of-graph functions for ALSA - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull, Itead, and BananaPi. - Improve dtx_diff utility filename printing. * tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (32 commits) of: document /sys/firmware/fdt dt-bindings: Add RISC-V vendor prefix vsprintf: Add %p extension "%pOF" for device tree of: find_node_by_full_name rewrite to compare each level of: use kbasename instead of open coding dt-bindings: thermal: add file extension to brcm,ns-thermal of: update ePAPR references to point to Devicetree Specification scripts/dtc: dtx_diff - Show real file names in diff header of: detect invalid phandle in overlay of: be consistent in form of file mode of: make __of_attach_node() static of: address.c header comment typo of: fdt.c header comment typo of: make of_fdt_is_compatible() static dt-bindings: display-timing.txt convert non-ascii characters to ascii Documentation: remove overlay-notes reference to non-existent file dt-bindings: usb: exynos-usb: Add missing required VDD properties dt-bindings: Add vendor prefix for Linksys MAINTAINERS: add device tree ABI documentation file of: Add vendor prefix for iWave Systems Technologies Pvt. Ltd ... |
||
|
Linus Torvalds
|
a9ceea2674 |
ARM: 64-bit DT updates
Device-tree updates for arm64 platforms. For the first time I can
remember, this is actually larger than the corresponding branch for
32-bit platforms overall, though that has more individual changes.
A significant portion this time is due to added machine support:
- Initial support for the Realtek RTD1295 SoC, along with the Zidoo
X9S set-top-box
- Initial support for Actions Semi S900 and the Bubblegum-96
single-board-cёmputer.
- Rockchips support for the rk3399-Firefly single-board-computer
gets added, this one stands out for being relatively fast,
affordable and well₋supported, compared to many boards that
only fall into one or two of the above categories.
- Mediatek gains support for the mt6797 mobile-phone SoC platform
and corresponding evaluation board.
- Amlogic board support gets added for the NanoPi K2 and S905x
LibreTech CC single-board computers and the R-Box Pro set-top-box
- Allwinner board support gets added for the OrangePi Win,
Orangepi Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single
board computers and the SoPine system-on-module.
- Renesas board support for Salvator-XS and H3ULCB
automotive development systems.
- Socionext Uniphier board support for LD11-global and LD20-global,
whatever those may be.
- Broadcom adds support for the new Stingray communication processor
in its iProc family, along with two reference boards.
Other updates include:
- For the hisicon platform, support for Hi3660-Hikey960 gets
extended significantly.
- Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier,
Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=E8pa
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Arnd Bergmann:
"Device-tree updates for arm64 platforms. For the first time I can
remember, this is actually larger than the corresponding branch for
32-bit platforms overall, though that has more individual changes.
A significant portion this time is due to added machine support:
- Initial support for the Realtek RTD1295 SoC, along with the Zidoo
X9S set-top-box
- Initial support for Actions Semi S900 and the Bubblegum-96
single-board-cёmputer.
- Rockchips support for the rk3399-Firefly single-board-computer gets
added, this one stands out for being relatively fast, affordable
and well₋supported, compared to many boards that only fall into one
or two of the above categories.
- Mediatek gains support for the mt6797 mobile-phone SoC platform and
corresponding evaluation board.
- Amlogic board support gets added for the NanoPi K2 and S905x
LibreTech CC single-board computers and the R-Box Pro set-top-box
- Allwinner board support gets added for the OrangePi Win, Orangepi
Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers
and the SoPine system-on-module.
- Renesas board support for Salvator-XS and H3ULCB automotive
development systems.
- Socionext Uniphier board support for LD11-global and LD20-global,
whatever those may be.
- Broadcom adds support for the new Stingray communication processor
in its iProc family, along with two reference boards.
Other updates include:
- For the hisicon platform, support for Hi3660-Hikey960 gets extended
significantly.
- Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier,
Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits)
ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k"
arm64: dts: mediatek: don't include missing file
ARM64: dts: meson-gxl: Add Libre Technology CC support
dt-bindings: arm: amlogic: Add Libre Technology CC board
dt-bindings: add Libre Technology vendor prefix
arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
arm64: dts: zte: Use - instead of @ for DT OPP entries
arm64: dts: marvell: add gpio support for Armada 7K/8K
arm64: dts: marvell: add pinctrl support for Armada 7K/8K
arm64: dts: marvell: use new binding for the system controller on cp110
arm64: dts: marvell: remove *-clock-output-names on cp110
arm64: dts: marvell: use new bindings for xor clocks on ap806
arm64: dts: marvell: mcbin: enable the mdio node
arm64: dts: Add Actions Semi S900 and Bubblegum-96
dt-bindings: Add vendor prefix for uCRobotics
arm64: dts: marvell: add xmdio nodes for 7k/8k
arm64: dts: marvell: add a comment on the cp110 slave node status
arm64: dts: marvell: remove cpm crypto nodes from dts files
arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
...
|
||
|
Linus Torvalds
|
1849f800fb |
ARM: Device-tree updates
Device-tree continues to see lots of updates. The majority of patches
here are smaller changes for new hardware on existing platforms, and
there are a few larger changes worth pointing out.
New machines:
- The new Action Semi S500 platform is added along with initial
support for the LeMaker Guitar board.
- STM32 gains support for three new boards: stm32h743-disco,
stm32f746-disco, and stm32f769-disco, along with new device
support for the existing stm32f429 boards.
- Renesas adds two new boards, the tiny GR-Peach based on RZ/A1H
with 10MB on-chip SRAM, and the iWave G20D-Q7 System-on-Module
plus board.
- On Marvell "mvebu", we gain support for the Linksys WRT3200ACM
wireless router.
- For NXP i.MX, we gain support for the Gateworks Ventana GW5600
and the Technexion Pico i.MX7D single-board computers.
- The BeagleBone Blue is added for OMAP, it's the latest variation
of the popular Beaglebone Black single-board computer.
- The Allwinner based Lichee Pi Zero and NanoPi M1 Plus boards
are added, these are the latest variations of a seemingly endless
supply of similar single-board computers.
Other updates:
- Linus Walleij improves support for the "Faraday" based SoC platforms
from various SoC makers (Moxart, Aspeed, Gemini)
- The ARM Mali GPU is now describe on Rockchips SoCs
- Mediatek MT7623 is extended significantly, making it much
more useful.
- Lots of individual updates on Renesas, OMAP, Rockchips, Broadcom,
Allwinner, Qualcomm, iMX
- For Amlogic, the clock support is extended a lot on meson8b.
- We now build the devicetree file for the Raspberry Pi 3 on 32-bit
ARM, in addition to the existing ARM64 support, to help users
wanting to run a 32-bit system on it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=onXv
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM device-tree updates from Arnd Bergmann:
"Device-tree continues to see lots of updates. The majority of patches
here are smaller changes for new hardware on existing platforms, and
there are a few larger changes worth pointing out.
New machines:
- The new Action Semi S500 platform is added along with initial
support for the LeMaker Guitar board.
- STM32 gains support for three new boards: stm32h743-disco,
stm32f746-disco, and stm32f769-disco, along with new device support
for the existing stm32f429 boards.
- Renesas adds two new boards, the tiny GR-Peach based on RZ/A1H with
10MB on-chip SRAM, and the iWave G20D-Q7 System-on-Module plus
board.
- On Marvell "mvebu", we gain support for the Linksys WRT3200ACM
wireless router.
- For NXP i.MX, we gain support for the Gateworks Ventana GW5600 and
the Technexion Pico i.MX7D single-board computers.
- The BeagleBone Blue is added for OMAP, it's the latest variation of
the popular Beaglebone Black single-board computer.
- The Allwinner based Lichee Pi Zero and NanoPi M1 Plus boards are
added, these are the latest variations of a seemingly endless
supply of similar single-board computers.
Other updates:
- Linus Walleij improves support for the "Faraday" based SoC
platforms from various SoC makers (Moxart, Aspeed, Gemini)
- The ARM Mali GPU is now describe on Rockchips SoCs
- Mediatek MT7623 is extended significantly, making it much more
useful.
- Lots of individual updates on Renesas, OMAP, Rockchips, Broadcom,
Allwinner, Qualcomm, iMX
- For Amlogic, the clock support is extended a lot on meson8b.
- We now build the devicetree file for the Raspberry Pi 3 on 32-bit
ARM, in addition to the existing ARM64 support, to help users
wanting to run a 32-bit system on it"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (345 commits)
ARM: dts: socfpga: set the i2c frequency
ARM: dts: socfpga: Add second ethernet alias to VINING FPGA
ARM: dts: socfpga: Drop LED node from VINING FPGA
ARM: dts: socfpga: Remove I2C EEPROMs from VINING FPGA
ARM: dts: socfpga: Enable QSPI support on VINING FPGA
ARM: dts: socfpga: Fix the ethernet clock phandle
ARM: pxa: Use - instead of @ for DT OPP entries
ARM: dts: owl-s500: Add SPS node
ARM: dts: owl-s500: Set CPU enable-method
dt-bindings: arm: cpus: Add S500 enable-method
ARM: dts: Add Actions Semi S500 and LeMaker Guitar
dt-bindings: arm: Document Actions Semi S900
dt-bindings: timer: Document Owl timer
ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
dt-bindings: arm: Document Actions Semi S500
dt-bindings: Add vendor prefix for Actions Semi
ARM: dts: turris-omnia: Add generic compatible string for I2C EEPROM
ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango)
ARM: dts: armada-385-linksys: fixup button node names
ARM: dts: armada-385-linksys: group pins in pinctrl
...
|
||
|
Linus Torvalds
|
8ca302e9c6 |
ARM: SoC platform updates
SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
for a few platforms:
- Andres Färber adds initial support for the Actions Semi S500 (a.k.a.
'owl') platform, a close relative of the S900 platform he adds for arm64.
- in mach-omap2, we remove more legacy code
- Rockchips gains support for the RV1108 SoC designed for camera
applications.
- For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70)
- Minor updates for other platforms, including davinci, s3c64xx,
prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8F3w
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
for a few platforms:
- Andres Färber adds initial support for the Actions Semi S500 (aka
'owl') platform, a close relative of the S900 platform he adds for
arm64.
- in mach-omap2, we remove more legacy code
- Rockchips gains support for the RV1108 SoC designed for camera
applications.
- For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70)
- Minor updates for other platforms, including davinci, s3c64xx,
prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits)
ARM: owl: smp: Drop bogus holding pen
ARM: owl: Drop custom machine
ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3
soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
soc: actions: Add Owl SPS
dt-bindings: power: Add Owl SPS power domains
MAINTAINERS: Update Actions Semi section with SPS
ARM: owl: Implement CPU enable-method for S500
MAINTAINERS: Add Actions Semi Owl section
ARM: Prepare Actions Semi S500
ARM: socfpga: Increase max number of GPIOs
ARM: stm32: Introduce MACH_STM32F469 flag
ARM: prima2: remove redundant select CPU_V7
ARM: davinci: fix const warnings
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ALWAYS_ON
ARM: OMAP4: hwmod_data: add SHAM crypto accelerator
ARM: OMAP4: hwmod data: add des
ARM: OMAP4: hwmod data: add aes2
ARM: OMAP4: hwmod data: add aes1
ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe()
...
|
||
|
Linus Torvalds
|
612341bda6 |
ARM: SoC non-urgent fixes for merge window
Smaller patches that didn't seem to find a home in other branches, and
low-priority fixes from late in the merge window.
- Lee Jones retires as bcm2835 (raspberry pi) co-maintainer.
- A couple of bugfixes for the ARM CCN bus driver that were
regarded not important enough
- minor device tree fixes for the Renesas and Marvell platforms,
that came a little late or did not justify have another
pull request after the last -rc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MBxL
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull non-urgent ARM SoC fixes from Arnd Bergmann:
"Smaller patches that didn't seem to find a home in other branches, and
low-priority fixes from late in the merge window.
- Lee Jones retires as bcm2835 (raspberry pi) co-maintainer.
- a couple of bugfixes for the ARM CCN bus driver that were regarded
not important enough
- minor device tree fixes for the Renesas and Marvell platforms, that
came a little late or did not justify have another pull request
after the last -rc"
* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
bus: arm-ccn: Enable stats for CCN-502 interconnect
dt-bindings: arm-ccn: Add bindings info for CCN-502 compatible string
bus: arm-ccn: Use devm_kcalloc() in arm_ccn_probe()
bus: arm-ccn: Fix module autoload
MAINTAINERS: add RV1108 Rockchip soc to maintained files
ARM: dts: kirkwood: Fix Openblock A6 nand partition overlap
ARM: dts: armadillo800eva: Split LCD mux and gpio
MAINTAINERS: Remove Lee Jones from bcm2835.
|
||
|
Linus Torvalds
|
f4dd029ee0 |
Char/Misc patches for 4.13-rc1
Here is the "big" char/misc driver patchset for 4.13-rc1. Lots of stuff in here, a large thunderbolt update, w1 driver header reorg, the new mux driver subsystem, google firmware driver updates, and a raft of other smaller things. Full details in the shortlog. All of these have been in linux-next for a while with the only reported issue being a merge problem with this tree and the jc-docs tree in the w1 documentation area. The fix should be obvious for what to do when it happens, if not, we can send a follow-up patch for it afterward. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpXKA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynLrQCdG9SxRjAbOd6pT9Fr2NAzpUG84YsAoLw+I3iO EMi60UXWqAFJbtVMS9Aj =yrSq -----END PGP SIGNATURE----- Merge tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the "big" char/misc driver patchset for 4.13-rc1. Lots of stuff in here, a large thunderbolt update, w1 driver header reorg, the new mux driver subsystem, google firmware driver updates, and a raft of other smaller things. Full details in the shortlog. All of these have been in linux-next for a while with the only reported issue being a merge problem with this tree and the jc-docs tree in the w1 documentation area" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits) misc: apds990x: Use sysfs_match_string() helper mei: drop unreachable code in mei_start mei: validate the message header only in first fragment. DocBook: w1: Update W1 file locations and names in DocBook mux: adg792a: always require I2C support nvmem: rockchip-efuse: add support for rk322x-efuse nvmem: core: add locking to nvmem_find_cell nvmem: core: Call put_device() in nvmem_unregister() nvmem: core: fix leaks on registration errors nvmem: correct Broadcom OTP controller driver writes w1: Add subsystem kernel public interface drivers/fsi: Add module license to core driver drivers/fsi: Use asynchronous slave mode drivers/fsi: Add hub master support drivers/fsi: Add SCOM FSI client device driver drivers/fsi/gpio: Add tracepoints for GPIO master drivers/fsi: Add GPIO based FSI master drivers/fsi: Document FSI master sysfs files in ABI drivers/fsi: Add error handling for slave drivers/fsi: Add tracepoints for low-level operations ... |
||
|
Arnd Bergmann
|
0c6cda5839 |
Actions Semi ARM based SoC DT for v4.13
This adds an initial DT for the S500 SoC and a devboard based on it. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZTUJnAAoJEPou0S0+fgE/iG8P+wdYY0r5HRpGgRKnMUEPzn2Y xNGyjF9afyQ8YBv+9qWBqAFct4nxNckEm+0TIVCVQ4Pwuv/i4ovgx5bZ6ud2I9wY jBIbgonuZx3ycLrUYiKLIvvkqbOYxkaoyU5Wxn/xc3G8VH+iF4NDJ4fok7BWlMk/ hJsuGmq6xC2FTSgQ4aXufLX0fWT3+Lblome9eoKOaN+NMh6iy8yENtPVPpSYIpIL 0Nx22FGZj2htUiabwuBYn2nDAYDW9/IkOPAklbZN0YtZ/jfCti1Ch77APqMuekvD 6pUJAT3/nqpRFPW5DGeuMmln+5yAcM1dar0B53lK+C91pQhk3L/o75YLJprhyxkq MtbONE2PcPuE31zNU/yvd/xwOeLKPYPTmbV/ceOM2C5qeUghYN/278Io86oCA6Ru szb3dONzjnFA8Oac2deuUvSOnmWqcH0ST0I/nBYXK9ZozAYyOGlq4lvVf80zayy+ tMpsq3vHLjpguCQQalhTwfix0JfgApgruHoupWgKPZuKFW2Sn/42kUOGOb9djoCx aw4+OL4S/XWbL39CVkDts00VG0jXihjtNvY1pLVO0PYSatbamzDf+Yg0JKEFZ2PC yeLkKDc0T9PjWmQBDgAo95e3oP7WgohciC/SEiXxPVAyxNtW4l7A5Lj1iVo0kv7X E5hkIU6svr10sE/rGtbU =Z5XX -----END PGP SIGNATURE----- Merge tag 'actions-arm-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt Pull "Actions Semi ARM based SoC DT for v4.13" from Andreas Färber: This adds an initial DT for the S500 SoC and a devboard based on it. * tag 'actions-arm-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: ARM: dts: owl-s500: Add SPS node ARM: dts: owl-s500: Set CPU enable-method dt-bindings: arm: cpus: Add S500 enable-method ARM: dts: Add Actions Semi S500 and LeMaker Guitar dt-bindings: arm: Document Actions Semi S900 dt-bindings: timer: Document Owl timer dt-bindings: arm: Document Actions Semi S500 dt-bindings: Add vendor prefix for Actions Semi |
||
|
Arnd Bergmann
|
6d599c8d35 |
Amlogic 64-bit DT changes for v4.13 (round 2)
- support new SPI controller driver - several more leaf clocks exposed to DT - New board: S905x LibreTech CC board -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIbBAABCAAGBQJZTDXpAAoJEFk3GJrT+8ZlErwP9RKRooWK3NkF+v9fFz9vCEdR 3RsF67B1TUc9STkTN5XieHVh07qGkEWpBwbAFItuim/sZZKth6cfCX45nRXh0Rjm cz56GHUeuAoY6uVvZUlFz9Oa7vi44XShNc3tztQQ9Bq5Nx1JHDgHRi3TrzjUgUEt zbKHESOAkPMEYu0kDIhQguiKoPjF1uMuyC/8advIa9DJLmx4XeMqDReRcrRzCOs9 AejuT+ZMA6K4YuzBFURpXsNYhKw8LS/K0tt/Qw5tWGN1iq+/JXaOKmY/e5UEo1we +PnwX0QZT96Lhidz1Ha7MmYfxI1MqAC6YifN//w4//ChazgTb0mz6Qokv1jjPNzE FK6c8aDdjHx8yMX1ldOKZ0tRO5IXWotHJU0Ds007WSOVuOyMrDfA0olANCCtBxuc R7j6xIM4OVp53RMVuCXte59MXeJXUwfpS91GQCMUDo+KFsO/ysfs1yaUQXawvLKO hZM5Ojw1ZuK1KekTUCbI3CJ1ALfY4KbHa3fCdLtrAKModqb0MP+hOlU0swt0SOcP vA2XgZxynKVJ2+RmleUxiI48Gkk8e8zDij4qgPCsIZoPjxOnZ2SI9UquHPA2upAi cMKtRX5Vt5I6lC0tGQAuZ32MiKvBslkBgrZI90f4yebMHgz8TzWEXNhaPPNnRFpO Tnt1tBWIh3DWYoi8vnI= =J5Ux -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64 Pull "Amlogic 64-bit DT changes for v4.13 (round 2)" from Kevin Hilman: - support new SPI controller driver - several more leaf clocks exposed to DT - New board: S905x LibreTech CC board * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gxl: Add Libre Technology CC support dt-bindings: arm: amlogic: Add Libre Technology CC board dt-bindings: add Libre Technology vendor prefix ARM64: dts: meson-gx: Add SPICC nodes clk: meson-gxbb: un-export the CPU clock clk: meson-gxbb: expose UART clocks clk: meson-gxbb: expose SPICC gate clk: meson-gxbb: expose spdif master clock clk: meson-gxbb: expose i2s master clock clk: meson-gxbb: expose spdif clock gates |