Transcoder port sync was introduced to the hardware in BDW. We
can trivially enable it for SKL+ since the same codepaths are
already used for ICL+ port sync. The only difference is the actual
location of the bits we need to poke.
We leave BDW out (at least for now) since it uses different modeset
paths that haven't been adapted for port sync, and IIRC using the
feature would involve some extra workarounds we've not implemented.
Pre-BDW hardware does not support port sync so we'd have to tweak
the modeset sequence to start the pipes as close together as possible
and hope for the best. So far no one has seriously tried to implement
that.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/27
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-9-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
We have a bunch of code that would like to know which
CPU transcoders are actually present in the hardware. Rather than
use various ad-hoc methods let's just include a full bitmask in
the device info, alongside pipe_mask.
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318170235.15176-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We use timer->expires == 0 to detect if a timer had been cancelled, but
it's a valid expiration we could set. Just skip using 0 and set the
expiry for the next jiffie.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403073657.13427-1-chris@chris-wilson.co.uk
Add a tiny per-engine request mempool so that we should always have a
request available for powermanagement allocations from tricky
contexts. This reserve is expected to be only used for kernel
contexts when barriers must be emitted [almost] without fail.
The main consumer for this reserved request is expected to be engine-pm,
for which we know that there will always be at least the previous pm
request that we can reuse under mempressure (so there should always be
a spare request for engine_park()).
This is an alternative to using a comparatively bulky mempool, which
requires custom handling for both our reserved allocation requirement
and to protect our TYPESAFE_BY_RCU slab cache. The advantage of mempool
would be that it would allow us to keep a larger per-engine request
pool. However, converting over to mempool is straightforward should the
need arise.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-and-tested-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402184037.21630-1-chris@chris-wilson.co.uk
This workaround now applies to all steppings, not just A0.
Wa_1409085225 is a temporary A0-only W/A however it is
identical to Wa_14010229206 and hence the combined workaround
is made permanent.
Bspec: 52890
Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[mattrope: added missing blank line]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326234955.16155-1-swathi.dhanavanthri@intel.com
In order to kill off a hostile context, we need to be able to reset the
GPU. So check that is supported prior to beginning the test.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402205839.25065-1-chris@chris-wilson.co.uk
Now that we can peek at GEM->engines[] and obtain a reference to them
using RCU, do so for instances where we can safely iterate the
potentially old copy of the engines. For setting, we can do this when we
know the engine properties are copied over before swapping, so we know
the new engines already have the global property and we update the old
before they are discarded. For reading, we only need to be safe; as we
do so on behalf of the user, their races are their own problem.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402124218.6375-1-chris@chris-wilson.co.uk
If we receive the error interrupt before the CS interrupt, we may find
ourselves without an active request to reset, skipping the GPU reset.
All because the attempt to reset was too early.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401110435.30389-1-chris@chris-wilson.co.uk
drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:205: warning: Excess function parameter 'supported' description in 'intel_uc_fw_init_early'
drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:205: warning: Excess function parameter 'platform' description in 'intel_uc_fw_init_early'
drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:205: warning: Excess function parameter 'rev' description in 'intel_uc_fw_init_early'
drivers/gpu/drm/i915/gt/uc/intel_guc_log.c:696: warning: Function parameter or member 'log' not described in 'intel_guc_log_info'
drivers/gpu/drm/i915/gt/uc/intel_guc_log.c:696: warning: Excess function parameter 'guc' description in 'intel_guc_log_info'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330212254.18236-1-chris@chris-wilson.co.uk
We cached the number of vma bound to the object in order to speed up
shrinker decisions. This has been superseded by being more proactive in
removing objects we cannot shrink from the shrinker lists, and so we can
drop the clumsy attempt at atomically counting the bind count and
comparing it to the number of pinned mappings of the object. This will
only get more clumsier with asynchronous binding and unbinding.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401223924.16667-1-chris@chris-wilson.co.uk
If we must revoke the fence because the VMA is no longer present, or
because the fence no longer applies, ensure that we do and convert it
into an error if we try but cannot.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401210104.15907-3-chris@chris-wilson.co.uk
Only GPU activity via the GGTT fence is asynchronous, we know that we
control the CPU access directly, so we only need to wait for the GPU to
stop using the fence before we relinquish it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401210104.15907-1-chris@chris-wilson.co.uk
If the current node/entry location is occupied, and the object is not
pinned, try assigning it some free space. We cannot wait here, so if in
doubt, we unreserve and try to grab all at once.
v2: Use the final pin_flags so that we won't have to move the object if
we find the wrong free space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401194135.5442-1-chris@chris-wilson.co.uk
If the user passes in a readonly reloc[], by the time we notice we have
already committed to modifying the execobjects, or have indeed done so
already. Reporting the failure just compounds the issue as we have no
second pass to fall back to anymore.
"Be damned if you do, and damned if you don't."
Testcase: igt/gem_exec_reloc/readonly
Fixes: 7dc8f11437 ("drm/i915/gem: Drop relocation slowpath")
References: fddcd00a49 ("drm/i915: Force the slow path after a user-write error")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331162150.3635-1-chris@chris-wilson.co.uk
When we allocate space in the GGTT we may have to allocate a larger
region than will be populated by the object to accommodate fencing. Make
sure that this space beyond the end of the buffer points safely into
scratch space, in case the HW tries to access it anyway (e.g. fenced
access to the last tile row).
v2: Preemptively / conservatively guard gen6 ggtt as well.
Reported-by: Imre Deak <imre.deak@intel.com>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1554
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331152348.26946-1-chris@chris-wilson.co.uk
For CI it is enough to point out a single failure
in isolation. However it is beneficial to gather
info in logs for transients further down
the line.
Do not stop into first comparison failure but
continue probing forward.
v2: for all engines and poisons (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331135403.16906-1-mika.kuoppala@linux.intel.com
Since we may be attempting to reset an active engine, we try to freeze
it in place before resetting -- to be on the safe side. We can go one
step further if we are using the CS flow semaphore to prevent the
context switching into the next.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331091459.29179-2-chris@chris-wilson.co.uk
Since we may kick more than engine, and may kick each one a couple of
times, coalesce the tasklet execution to the end. This also ensures that
we have the chance to run the tasklet immediately after priority
bumping.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331114852.11583-1-chris@chris-wilson.co.uk
Specification was updated with vswing tables for different
configurations.
Also reordering icl_mg_phy_ddi_buf_trans struct to match table order.
BSpec: 21735
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330210044.130510-3-jose.souza@intel.com
DDI ports have its encoders initialized with INTEL_OUTPUT_DDI type and
later eDP ports that have the type changed to INTEL_OUTPUT_EDP.
But for all other DDI ports it can drive HDMI or DP depending on what
user connects to the ports.
ehl_get_combo_buf_trans() and tgl_get_combo_buf_trans() was checking
for INTEL_OUTPUT_DP that was never true, causing wrong vswing tables
being used.
So here replacing the INTEL_OUTPUT_DP checks by the valid output types
that this functions receives as parameters. HDMI cases will be
correctly handled as it do not use encoder->type, instead it calls the
functions with INTEL_OUTPUT_HDMI as type parameter and HDMI don't have
retraining.
v2:
changed INTEL_OUTPUT_DDI to INTEL_OUTPUT_EDP and INTEL_OUTPUT_HDMI
Fixes: bd3cf6f7ce ("drm/i915/dp/tgl+: Update combo phy vswing tables")
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330210044.130510-1-jose.souza@intel.com
The DDI IO power well must not be enabled for a TypeC port in TBT mode,
ensure this during driver loading/system resume.
This gets rid of error messages like
[drm] *ERROR* power well DDI E TC2 IO state mismatch (refcount 1/enabled 0)
and avoids leaking the power ref when disabling the output.
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330152244.11316-1-imre.deak@intel.com
process_csb: 0000:00:02.0 bcs0: cs-irq head=4, tail=5
process_csb: 0000:00:02.0 bcs0: csb[5]: status=0x00008002:0x60000020
trace_ports: 0000:00:02.0 bcs0: preempted { ff84:45154! prio 2 }
trace_ports: 0000:00:02.0 bcs0: promote { ff84:45155* prio 2 }
trace_ports: 0000:00:02.0 bcs0: submit { ff84:45156 prio 2 }
process_csb: 0000:00:02.0 bcs0: cs-irq head=5, tail=6
process_csb: 0000:00:02.0 bcs0: csb[6]: status=0x00000018:0x60000020
trace_ports: 0000:00:02.0 bcs0: completed { ff84:45155* prio 2 }
process_csb: 0000:00:02.0 bcs0: ring:{start:0x00178000, head:0928, tail:0928, ctl:00000000, mode:00000200}
process_csb: 0000:00:02.0 bcs0: rq:{start:00178000, head:08b0, tail:08f0, seqno:ff84:45155, hwsp:45156},
process_csb: 0000:00:02.0 bcs0: ctx:{start:00178000, head:e000928, tail:0928},
process_csb: GEM_BUG_ON("context completed before request")
In this sequence, we can see that although we have submitted the next
request [ff84:45156] to HW (via ELSP[]) it has not yet reported the
lite-restore. Instead, we see the completion event of the currently
active request [ff84:45155] but at the time of processing that event,
the breadcrumb has not yet been written. Though by the time we do print
out the debug info, the seqno write of ff84:45156 has landed!
Therefore there is a serialisation problem between the seqno writes and
CS events, not just between the CS buffer and its head/tail pointers as
previously observed on Icelake.
This is not a huge problem, as we don't strictly rely on the breadcrumb
to determine HW activity, but it may indicate that interrupt delivery is
before the seqno write, aka bringing back the plague of missed
interrupts from yesteryear. However, there is no indication of this
wider problem, so let's just flush the seqno read before reporting an
error. If it persists after the fresh read we can worry again.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330234318.30638-1-chris@chris-wilson.co.uk
Upon a GPU reset, we copy the default context image over top of the
guilty image. This will rollback the CTX_TIMESTAMP register to before
our value of ce->runtime.last. Reset both back to 0 so that we do not
encounter an underflow on the next schedule out after resume.
This should not be a huge issue in practice, as hangs should be rare in
correct code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330125827.5804-1-chris@chris-wilson.co.uk
Use a separate array allocation for the execbuf vma, so that we can
track their lifetime independently from the copy of the user arguments.
With luck, this has a secondary benefit of splitting the malloc size to
within reason and avoid vmalloc. The downside is that we might require
two separate vmallocs -- but much less likely.
In the process, this prevents a memory leak on the ww_mutex error
unwind.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1390
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330133710.14385-1-chris@chris-wilson.co.uk
We wish that the scheduler emit the context modification commands prior
to enabling the oa_config, for which we must explicitly inform it of the
ordering constraints. This is especially important as we now wait for
the final oa_config setup to be completed and as this wait may be on a
distinct context to the state modifications, we need that command packet
to be always last in the queue.
We borrow the i915_active for its ability to track multiple timelines
and the last dma_fence on each; a flexible dma_resv. Keeping track of
each dma_fence is important for us so that we can efficiently schedule
the requests and reprioritise as required.
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200327112212.16046-3-chris@chris-wilson.co.uk
For conveniences of callers that just want to use an i915_active to
track a wide array of concurrent timelines, wrap the base i915_active
struct inside a kref. This i915_active will self-destruct after use.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200327112212.16046-2-chris@chris-wilson.co.uk
Allow a bit of leniency for the CPU scheduler to be distracted while we
flush the tasklet and so ensure that we always check the status of the
request once more before timing out.
v2: Wait until the HW acked the submit, and we do any secondary actions
for the submit (e.g. timeslices)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330121644.25277-1-chris@chris-wilson.co.uk
Add some extra information into trace_ports to help with reviewing
correctness.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330113137.24425-1-chris@chris-wilson.co.uk
We report HuC status in debugfs using register read, but
we missed that on Gen11+ HuC uses different register.
Use correct one.
While here, correct placement of the colon.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330113338.1713-1-michal.wajdeczko@intel.com
There might be many reasons why we failed to successfully
load and authenticate HuC firmware, but today we only use
single error in case of no HuC hardware. Add some more
error codes for most common cases (disabled, not installed,
corrupted or mismatched firmware).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Robert M. Fosha <robert.m.fosha@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330113302.1670-1-michal.wajdeczko@intel.com
Add definitions for registers grouped under Transcoder VRR function
with necessary bitfields.
Bspec: 49268
v2: Use REG_GENMASK, correct tabs/space indentation and move the
definitions near the transcoder section.(Jani)
v3: Remove unnecessary prefix from bit/mask definitions.(Manasi)
v4: Use 'trans' in macro for better readability.(Manasi)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319015941.28008-1-aditya.swarup@intel.com
In what seems remarkably similar to the w/a required to not reload an
idle context with HEAD==TAIL, it appears we must prevent the HW from
switching to an idle context in ELSP[1], while simultaneously trying to
preempt the HW to run another context and a continuation of the idle
context (which is no longer idle).
We can achieve this by preventing the context from completing while we
reload a new ELSP (by applying ring_set_paused(1) across the whole of
dequeue), except this eventually fails due to a lite-restore into a
waiting semaphore does not generate an ACK. Instead, we try to avoid
making the GPU do anything too challenging and not submit a new ELSP
while the interrupts + CSB events appear to have fallen behind the
completed contexts. We expect it to catch up shortly so we queue another
tasklet execution and hope for the best.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1501
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200327201433.21864-1-chris@chris-wilson.co.uk
Use the recently introduced encoder .compute_config_late() hook to
do the MST master transcoder assignment. Avoids having to do it
in a funny way before we know the CPU transcoder of each pipe.
And now we can also properly use hw.active instead of uapi.active
since it too has been calculated earlier for everyone.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Userptr causes lockdep to complain when we are using the aliasing-ppgtt
(and ggtt, but for that it is rightfully so to complain about) in that
when we revoke the userptr we take a mutex which we also use to revoke
the mmaps. However, we only revoke mmaps for GGTT bindings and we never
allow userptr to create a GGTT binding so the warning should be false
and is simply caused by our conflation of the aliasing-ppgtt with the
ggtt. So lets try treating the binding into the aliasing-ppgtt as a
separate lockclass from the ggtt. The downside is that we are
deliberately suppressing lockdep;s ability to warn us of cycles.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/478
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326142727.31962-1-chris@chris-wilson.co.uk
