Add the device tree bindings for Truly NT35597 panel driver. This panel
driver supports both single DSI and dual DSI.
However, this patch series supports only dual DSI.
Changes in v10:
- Remove active high in the documentation for mode gpio
- Fix commmit text detail about the board and also
fix a typo
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1538787139-28122-2-git-send-email-abhinavk@codeaurora.org
Add support for Truly NT35597 panel driver used in MSM reference
platforms. This panel driver supports both single DSI and dual
DSI modes.
However, this patch series adds support only for dual DSI mode.
Changes in v10:
- None
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1538787139-28122-1-git-send-email-abhinavk@codeaurora.org
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-15-noralf@tronnes.org
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-6-noralf@tronnes.org
A while back we removed it, yet that lead to regressions. At some later
point, I've attempted to remove it again without fully grasping the
unique (pun intended) situation that virtio is in.
Add a bulky comment to document why the call should stay as-is, for the
next person who's around.
As a Tl;Dr: virtio sits on top of struct virtio_device, which confuses
dev_is_pci(), wrong info gets sent to userspace and X doesn't start.
Driver needs to explicitly call drm_dev_set_unique() to keep it working.
v2: Fix handful of typos (Laszlo)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024144252.16518-1-emil.l.velikov@gmail.com
Previous commit removed the only reason why we were allowing NULL as
a parent device. With that resolved, we can enforce nobody else does
that mistake.
With that we can drop the ugly drm_dev_set_unique workaround.
v2: rebase, silence checkpatch "== NULL" warning
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Deepak Sharma <deepak.sharma@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023163550.15211-2-emil.l.velikov@gmail.com
Modify vgem_init to take platform dev as parent in drm_dev_init.
This will make drm device available at "/sys/devices/platform/vgem"
in x86 chromebook.
v2: rebase, address checkpatch typo and line over 80 characters
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Deepak Sharma <deepak.sharma@amd.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023163550.15211-1-emil.l.velikov@gmail.com
Set shared_max to the number of shared fences right before we release
the lock.
This way every attempt to add a shared fence without previously
reserving a slot will cause an error.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Link: https://patchwork.kernel.org/patch/10626147/
Let's support simultaneous submissions to multiple engines.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.kernel.org/patch/10626149/
No need for that any more. Just replace the list when there isn't enough
room any more for the additional fence.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.kernel.org/patch/10626143/
Fixes the following warnings:
../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'
../drivers/gpu/drm/drm_connector.c:306: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'
../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'
../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'
../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'
Fixes: 6b7e2d5c30 ("drm: add drm_connector_attach_edid_property()")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024182442.206411-1-sean@poorly.run
There's no reason to track the atomic state three times. Unfortunately,
this is currently what we're doing, and even worse is that there is only
one actually correct state pointer: the one in mst_state->base.state.
mgr->state never seems to be used, along with the one in
mst_state->state.
This confused me for over 4 hours until I realized there was no magic
behind these pointers. So, let's save everyone else from the trouble.
Signed-off-by: Lyude Paul <lyude@redhat.com>.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023231251.16883-3-lyude@redhat.com
Because we have drm_dp_atomic_find_vcpi_slots(), which actually takes
care to update the atomic state of the MST topology, prints valuable
debugging output, and actually takes references to the ports it's
checking! This explains some incorrect usage I've been seeing across the
tree...
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023231251.16883-2-lyude@redhat.com
4.19 is out, Lyude asked for a backmerge, and it's been a while. All
very good reasons on their own :-)
Signed-off-by: Sean Paul <seanpaul@chromium.org>
When vc4_plane_state is duplicated ->is_yuv is left assigned to its
previous value, and we never set it back to false when switching to
a non-YUV format.
Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch
of the vc4_plane_setup_clipping_and_scaling() function.
Fixes: fc04023faf ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.com
X/Y positioning of T-format buffers is quite tricky and the current
implementation was failing to position a plane using this format
correctly when the CRTC X, Y or both X and Y offsets were negative.
It was also failing when the SRC X/Y offsets were != 0.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-5-boris.brezillon@bootlin.com
The offset adjustment depends on the framebuffer modified, so let's
just move this operation in the DRM_FORMAT_MOD_LINEAR case inside
vc4_plane_mode_set().
This we'll be able to fix offset calculation for
DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED and DRM_FORMAT_MOD_BROADCOM_SANDXXX.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-4-boris.brezillon@bootlin.com
drm_atomic_helper_check_plane_state() takes care of checking the
scaling capabilities and calculating the clipped X/Y offsets for us.
Rely on this function instead of open-coding the logic.
Incidentally, it seems to fix a problem we had with negative X/Y
positioning of YUV planes.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-3-boris.brezillon@bootlin.com
The Samsung S6D16D0 is a simple comman mode only DSI display
that is used on the ST-Ericsson Ux500 reference design
TVK1281618 user interface board (UIB).
Cc: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023074630.29186-2-linus.walleij@linaro.org
The DSI devices have a maximum operating frequency specified
in their data sheet per the MIPI specification, and DSI hosts
that can scale their frequency need this information to set
their clock dividers right.
As current panel drivers often lack this information, specify
that setting it to zero will make the DSI host use some
reasonable default.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023072422.25754-1-linus.walleij@linaro.org
We recently bikeshedded this to a different flavour, but forgot to
update the recommendations.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181019084311.23836-1-daniel.vetter@ffwll.ch
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR because its
better to have inlined function rather than code-opened implementation.
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018204815.GA23390@armorer
UDL doesn't support vblank functionality so we don't need to
initialize vblank here (we are able to send page flip
completion events even without vblank initialization)
Moreover current drm_vblank_init call with num_crtcs > 0 causes
sending DRM_EVENT_FLIP_COMPLETE event with zero timestamp every
time. This breaks userspace apps (for example weston) which
relies on timestamp value.
Cc: stable@vger.kernel.org
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928144126.21598-1-Eugeniy.Paltsev@synopsys.com
convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().
remove suspend_state field from the rcar_du_device
structure as it is no more required.
With this conversion, also drm_fbdev_cma_set_suspend_unlocked()
will left with no consumer. So this function can be removed.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918163903.GA11172@jordon-HP-15-Notebook-PC
v2:
add a mutex between sync_cb execution and free.
v3:
clearly separating the roles for pt_lock and cb_mutex (Chris)
v4:
the cb_mutex should be taken outside of the pt_lock around
this if() block. (Chris)
v5:
fix a corner case
v6:
tidy drm_syncobj_fence_get_or_add_callback up. (Chris)
Tested by syncobj_basic and syncobj_wait of igt.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.kernel.org/patch/10652893/
If failed to find the deivice owning the boot framebuffer,
try to use the first VGA device instead of the last one.
Usually the 1st device is integrated GPU who owns the boot framebuffer.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1535739600-8842-2-git-send-email-aaron.ma@canonical.com
EFI GOP uses 64-bit frame buffer address when some BIOS
disabled CSM support. vgaarb only stores lfb_base,
this will lead boot framebuffer to wrong device.
Add ext_lfb_base support to use 64-bit fb address.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1535739600-8842-1-git-send-email-aaron.ma@canonical.com
VESA eDP 1.4 specification has separate fields defined in
EDP_DPCD_REV for eDP 1.4a and 1.4b eDP revisions.
This patch defines those. Found this when one of my eDP panels
advertises eDP 1.4a (04h) in the EDP_DPCD_REV DPCD field.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009002351.23085-1-manasi.d.navare@intel.com
- Fix GPU hang on MacBook2,1 when booting in EFI mode (Bugzilla #105637)
- Fix garbled console on Y tiled BIOS framebuffer configs (Bugzilla #108264)
- Fix black screen on certain eDP panels eg. Dell XPS 9350 (Bugzilla #107489 and #105338)
- MST fixes that Rodrigo dropped from drm-intel-fixes and bunch of Icelake fixes
- Then assorted proactive code fixes caught by CI or developers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018165725.GA2281@jlahtine-desk.ger.corp.intel.com
The DMA API does its own zone decisions based on the coherent_dma_mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181013151707.32210-7-hch@lst.de
This patch is for VK_KHR_timeline_semaphore extension, semaphore is called syncobj in kernel side:
This extension introduces a new type of syncobj that has an integer payload
identifying a point in a timeline. Such timeline syncobjs support the
following operations:
* CPU query - A host operation that allows querying the payload of the
timeline syncobj.
* CPU wait - A host operation that allows a blocking wait for a
timeline syncobj to reach a specified value.
* Device wait - A device operation that allows waiting for a
timeline syncobj to reach a specified value.
* Device signal - A device operation that allows advancing the
timeline syncobj to a specified value.
v1:
Since it's a timeline, that means the front time point(PT) always is signaled before the late PT.
a. signal PT design:
Signal PT fence N depends on PT[N-1] fence and signal opertion fence, when PT[N] fence is signaled,
the timeline will increase to value of PT[N].
b. wait PT design:
Wait PT fence is signaled by reaching timeline point value, when timeline is increasing, will compare
wait PTs value with new timeline value, if PT value is lower than timeline value, then wait PT will be
signaled, otherwise keep in list. syncobj wait operation can wait on any point of timeline,
so need a RB tree to order them. And wait PT could ahead of signal PT, we need a sumission fence to
perform that.
v2:
1. remove unused DRM_SYNCOBJ_CREATE_TYPE_NORMAL. (Christian)
2. move unexposed denitions to .c file. (Daniel Vetter)
3. split up the change to drm_syncobj_find_fence() in a separate patch. (Christian)
4. split up the change to drm_syncobj_replace_fence() in a separate patch.
5. drop the submission_fence implementation and instead use wait_event() for that. (Christian)
6. WARN_ON(point != 0) for NORMAL type syncobj case. (Daniel Vetter)
v3:
1. replace normal syncobj with timeline implemenation. (Vetter and Christian)
a. normal syncobj signal op will create a signal PT to tail of signal pt list.
b. normal syncobj wait op will create a wait pt with last signal point, and this wait PT is only signaled by related signal point PT.
2. many bug fix and clean up
3. stub fence moving is moved to other patch.
v4：
1. fix RB tree loop with while(node=rb_first(...)). (Christian)
2. fix syncobj lifecycle. (Christian)
3. only enable_signaling when there is wait_pt. (Christian)
4. fix timeline path issues.
5. write a timeline test in libdrm
v5: (Christian)
1. semaphore is called syncobj in kernel side.
2. don't need 'timeline' characters in some function name.
3. keep syncobj cb.
v6: (Christian)
1. merge syncobj_timeline to syncobj structure.
2. simplify some check sentences.
3. some misc change.
4. fix CTS failed issue.
v7: (Christian)
1. error handling when creating signal pt.
2. remove timeline naming in func.
3. export flags in find_fence.
4. allow reset timeline.
v8:
1. use wait_event_interruptible without timeout
2. rename _TYPE_INDIVIDUAL to _TYPE_BINARY
v9:
1. rename signal_pt->base to signal_pt->fence_array to avoid misleading
2. improve kerneldoc
individual syncobj is tested by ./deqp-vk -n dEQP-VK*semaphore*
timeline syncobj is tested by ./amdgpu_test -s 9
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: Christian Konig <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Rakos <Daniel.Rakos@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/257258/
Since when it was introduced we forgot to add
this case so ICL was using a wrong signal_levels
as reference.
Fixes: fb5c8e9d43 ("drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017215652.26841-1-rodrigo.vivi@intel.com
(cherry picked from commit 61cdfb9e19)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are
from offset 12 & TC4 is at offset 21.
Create a function to choose correct clk-off bit.
v2: Add fixes tag (Lucas)
Fixes: c27e917e2b ("drm/i915/icl: add basic support for the ICL clocks")
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com
(cherry picked from commit bb1c7edc6d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This patch creates a function/wrapper to check if port is combophy port
instead of explicitly comparing ports.
Changes since V1:
- keep all intel_port_is_* helper together (Lucas)
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004085043.10154-1-mahesh1.kumar@intel.com
(cherry picked from commit 176597a12d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlvHll4ACgkQlvcN/ahK
Bwq+Bwf5AbcQDTCun9Qi1HGLxEJZJ/3CMY0PumrDf/U0qyLOs96GbwBJfG8orRpM
Fdyr91cQ0vWeMT3IvcHSj8lPhRRwSbzrLLYFZxoE9JLIaRzRovoavzXQH3IXZ6L0
MxO2t8ZhXlF9bM8dyrHHG7Q8OHdTjaoecTardtBn061cPXXQj4bhJxeCnIbjvMxv
Z4Uhq6vECz/X/xLifSb8Aag8riU0dsq0nqbMCU307xLiGW3Sg1vALcSgyMOlaHJq
iNVwG3rlDa0+6yAfEI1rGf3vy0zb5TohyC2b4934GRMmF55lgnu967npZeMRxKNU
yke98hm9T1b5xEMFXrfv94mQbYWisQ==
=+RQz
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-10-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- Add quirk to fix orientation of Acer One 10 (S1003) panel (Hans)
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017200741.GA240649@art_vandelay
If BIOS configured a Y tiled FB we failed to set up the backing object
tiling accordingly, leading to a lack of GT fence installed and a
garbled console.
The problem was bisected to
commit 011f22eb54 ("drm/i915: Do NOT skip the first 4k of stolen memory for pre-allocated buffers v2")
but it just revealed a pre-existing issue.
Kudos to Ville who suspected a missing fence looking at the corruption
on the screen.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: <ronald@innovation.ch>
Cc: <stable@vger.kernel.org>
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: <ronald@innovation.ch>
Tested-by: <ronald@innovation.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108264
Fixes: bc8d7dffac ("drm/i915/skl: Provide a Skylake version of get_plane_config()")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016160011.28347-1-imre.deak@intel.com
(cherry picked from commit 914a4fd8cd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For mmap-exhaustion, we deliberately put the system under a large amount
of pressure to ensure that we are able to reap mmap-offsets from dead
objects. If background activity does that reaping for us, that defeats
the purpose of the test and in some cases will fail our sanity checks
(because of the fake activity we use to prevent the idle worker).
Fixes: 932cac10c8 ("drm/i915/selftests: Prevent background reaping of acti
ve objects")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011103748.18387-1-chris@chris-wilson.co.uk
(cherry picked from commit 0b4bf7ca9b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This patch fixes the original commit c0cfb10d9e ("drm/i915/edp:
Do not do link training fallback or prune modes on EDP") that causes
a blank screen in case of certain eDP panels (Eg: seen on Dell XPS13 9350)
where first link training fails and a retraining is required by falling
back to lower link rate/lane count.
In case of some panels they advertise higher link rate/lane count
than whats required for supporting the panel's native mode.
But we always link train at highest link rate/lane count for eDP
and if that fails we can still fallback to lower link rate/lane count
as long as the fallback link BW still fits the native mode to avoid
pruning the panel's native mode yet retraining at fallback values
to recover from a blank screen.
v3:
* Add const for fixed_mode (Ville)
v2:
* Send uevent if link failure on eDP unconditionally
Fixes: c0cfb10d9e ("drm/i915/edp: Do not do link training fallback or prune modes on EDP")
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v4.17+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107489
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105338
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Alexander Wilson <alexander.wilson@ncf.edu>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009212804.702-1-manasi.d.navare@intel.com
(cherry picked from commit 1e712535c5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently, i915 appears to rely on blocking modesets on
no-longer-present MSTB ports by simply returning NULL for
->best_encoder(), which in turn causes any new atomic commits that don't
disable the CRTC to fail. This is wrong however, since we still want to
allow userspace to disable CRTCs on no-longer-present MSTB ports by
changing the DPMS state to off and this still requires that we retrieve
an encoder.
So, fix this by always returning a valid encoder regardless of the state
of the MST port.
Changes since v1:
- Remove mst atomic helper, since this got replaced with a much simpler
solution
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-6-lyude@redhat.com
(cherry picked from commit a9f9ca33d1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
