Driver Changes:
- Fix GitLab #1698: Performance regression with Linux 5.7-rc1 on
Iris Plus 655 and 4K screen (Chris)
- Add Wa_14011059788 for Tigerlake (Matt A)
- Add per ctx batchbuffer wa for timestamp for Gen12 (Mika)
- Use indirect ctx bb to load cmd buffer control value
from context image to avoid corruption (Mika)
- Enable DP Display Audio WA (Uma, Jani)
- Update forcewake firmware ranges for Icelake (Radhakrishna)
- Add missing deinitialization cases of load failure for display (Jose)
- Implement TC cold sequences for Icelake and Tigerlake (Jose)
- Unbreak enable_dpcd_backlight modparam (Lyude)
- Move the late flush_submission in retire to the end (Chris)
- Demote "Reducing compressed framebufer size" message to info (Peter)
- Push MST link retraining to the hotplug work (Ville)
- Hold obj->vma.lock over for_each_ggtt_vma() (Chris)
- Fix timeout handling during TypeC AUX power well enabling for ICL (Imre)
- Fix skl+ non-scaled pfit modes (Ville)
- Prefer soft-rc6 over RPS DOWN_TIMEOUT (Chris)
- Sanitize GT first before poisoning HWSP (Chris)
- Fix up clock RPS frequency readout (Chris)
- Avoid reusing the same logical CCID (Chris)
- Avoid dereferencing a dead context (Chris)
- Always enable busy-stats for execlists (Chris)
- Apply the aggressive downclocking to parking (Chris)
- Restore aggressive post-boost downclocking (Chris)
- Scrub execlists state on resume (Chris)
- Add debugfs attributes for LPSP (Ansuman)
- Improvements to kernel selftests (Chris, Mika)
- Add tiled blits selftest (Zbigniew)
- Fix error handling in __live_lrc_indirect_ctx_bb() (Dan)
- Add pre/post plane updates for SAGV (Stanislav)
- Add ICL PG3 PW ID for EHL (Anshuman)
- Fix Sphinx build duplicate label warning (Jani)
- Error log non-zero audio power refcount after unbind (Jani)
- Remove object_is_locked assertion from unpin_from_display_plane (Chris)
- Use single set of AUX powerwell ops for gen11+ (Matt R)
- Prefer drm_WARN_ON over WARN_ON (Pankaj)
- Poison residual state [HWSP] across resume (Chris, Tvrtko)
- Convert request-before-CS assertion to debug (Chris)
- Carefully order virtual_submission_tasklet (Chris)
- Check carefully for an idle engine in wait-for-idle (Chris)
- Only close vma we open (Chris)
- Trace RPS events (Chris)
- Use the RPM config register to determine clk frequencies (Chris)
- Drop rq->ring->vma peeking from error capture (Chris)
- Check preempt-timeout target before submit_ports (Chris)
- Check HWSP cacheline is valid before acquiring (Chris)
- Use proper fault mask in interrupt postinstall too (Matt R)
- Keep a no-frills swappable copy of the default context state (Chris)
- Add atomic helpers for bandwidth (Stanislav)
- Refactor setting dma info to a common helper from device info (Michael)
- Refactor DDI transcoder code for clairty (Ville)
- Extend PG3 power well ID to ICL (Anshuman)
- Refactor PFIT code for readability and future extensibility (Ville)
- Clarify code split between intel_ddi.c and intel_dp.c (Ville)
- Move out code to return the digital_port of the aux ch (Jose)
- Move rps.enabled/active and use of RPS interrupts to flags (Chris)
- Remove superfluous inlines and dead code (Jani)
- Re-disable -Wframe-address from top-level Makefile (Nick)
- Static checker and spelling fixes (Colin, Nathan)
- Split long lines (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430124904.GA100924@jlahtine-desk.ger.corp.intel.com
UAPI Changes:
Cross-subsystem Changes:
* MAINTAINERS: restore alphabetical order; update cirrus driver
* Dcomuentation: document visionix, chronteli, ite vendor prefices; update
documentation for Chrontel CH7033, IT6505, IVO, BOE,
Panasonic, Chunghwa, AUO bindings; convert dw_mipi_dsi.txt
to YAML; remove todo item for drm_display_mode.hsync removal;
Core Changes:
* drm: add devm_drm_dev_alloc() for managed allocations of drm_device;
use DRM_MODESET_LOCK_ALL_*() in mode-object code; remove
drm_display_mode.hsync; small cleanups of unused variables,
compiler warnings and static functions
* drm/client: dual-lincensing: GPL-2.0 or MIT
* drm/mm: optimize tree searches in rb_hole_addr()
Driver Changes:
* drm/{many}: use devm_drm_dev_alloc(); don't use drm_device.dev_private
* drm/ast: don't double-assign to drm_crtc_funcs.set_config; drop
drm_connector_register()
* drm/bochs: drop drm_connector_register()
* drm/bridge: add support for Chrontel ch7033; fix stack usage with
old gccs; return error pointer in drm_panel_bridge_add()
* drm/cirrus: Move to tiny
* drm/dp_mst: don't use 2nd sideband tx slot; revert "Remove single tx
msg restriction"
* drm/lima: support runtime PM;
* drm/meson: limit modes wrt chipset
* drm/panel: add support for Visionox rm69299; fix clock on
boe-tv101wum-n16; fix panel type for AUO G101EVN10;
add support for Ivo M133NFW4 R0; add support for BOE
NV133FHM-N61; add support for AUO G121EAN01.4, G156XTN01.0,
G190EAN01
* drm/pl111: improve vexpress init; fix module auto-loading
* drm/stm: read number of endpoints from device tree
* drm/vboxvideo: use managed PCI functions; drop DRM_MTRR_WC
* drm/vkms: fix use-after-free in vkms_gem_create(); enable cursor
support by default
* fbdev: use boolean values in several drivers
* fbdev/controlfb: fix COMPILE_TEST
* fbdev/w100fb: fix double-free bug
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAl6ztuYACgkQaA3BHVML
eiMWaAgAvYpXvBqBfE/5jOTa1zWQUX9VMbmMDUqSAgec5r/HVHjmlbsDWkLff2XG
rH7T2shMNJwluoCleHfRFYUfyUWMmXoMgri1elnf4EgddmekLZ6vNQjtAYMRFUfL
7VegcFw5D5Z28uxK5YGnaaSQob34LvD8UTgvnCVfDQzCjcEzGYi1d9XELm7kTHje
dF2FOWPeF8FTqP0XHM8RrHNXW/pUPy9qErpmb2bWYBQp7ebkI2Q4p6IZIpRQm757
bnKPIdMEcy4BWMk1xtzjEYEb4bGSZhozJUWKFwpm/AHNvTrQCt9hn0GSVrXiqBcR
UKb42BRxEVR29C/4n10pUcnnQmmi+Q==
=yzZ9
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-05-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.8:
UAPI Changes:
Cross-subsystem Changes:
* MAINTAINERS: restore alphabetical order; update cirrus driver
* Dcomuentation: document visionix, chronteli, ite vendor prefices; update
documentation for Chrontel CH7033, IT6505, IVO, BOE,
Panasonic, Chunghwa, AUO bindings; convert dw_mipi_dsi.txt
to YAML; remove todo item for drm_display_mode.hsync removal;
Core Changes:
* drm: add devm_drm_dev_alloc() for managed allocations of drm_device;
use DRM_MODESET_LOCK_ALL_*() in mode-object code; remove
drm_display_mode.hsync; small cleanups of unused variables,
compiler warnings and static functions
* drm/client: dual-lincensing: GPL-2.0 or MIT
* drm/mm: optimize tree searches in rb_hole_addr()
Driver Changes:
* drm/{many}: use devm_drm_dev_alloc(); don't use drm_device.dev_private
* drm/ast: don't double-assign to drm_crtc_funcs.set_config; drop
drm_connector_register()
* drm/bochs: drop drm_connector_register()
* drm/bridge: add support for Chrontel ch7033; fix stack usage with
old gccs; return error pointer in drm_panel_bridge_add()
* drm/cirrus: Move to tiny
* drm/dp_mst: don't use 2nd sideband tx slot; revert "Remove single tx
msg restriction"
* drm/lima: support runtime PM;
* drm/meson: limit modes wrt chipset
* drm/panel: add support for Visionox rm69299; fix clock on
boe-tv101wum-n16; fix panel type for AUO G101EVN10;
add support for Ivo M133NFW4 R0; add support for BOE
NV133FHM-N61; add support for AUO G121EAN01.4, G156XTN01.0,
G190EAN01
* drm/pl111: improve vexpress init; fix module auto-loading
* drm/stm: read number of endpoints from device tree
* drm/vboxvideo: use managed PCI functions; drop DRM_MTRR_WC
* drm/vkms: fix use-after-free in vkms_gem_create(); enable cursor
support by default
* fbdev: use boolean values in several drivers
* fbdev/controlfb: fix COMPILE_TEST
* fbdev/w100fb: fix double-free bug
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507072503.GA10979@linux-uq9g
We need to keep the reference to the drm_gem_object
until the last access by vkms_dumb_create.
Therefore, the put the object after it is used.
This fixes a use-after-free issue reported by syzbot.
While here, change vkms_gem_create() symbol to static.
Reported-and-tested-by: syzbot+e3372a2afe1e7ef04bc7@syzkaller.appspotmail.com
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200427214405.13069-1-ezequiel@collabora.com
This patch proposes a change in the behavior of the cursor to enable it as
soon as the vkms module is added. Enabling the cursor by default appears
to be an expected and more friendly behavior, especially when running IGT
tests.
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200321203740.pg3r7f4vybruowox@smtp.gmail.com
Fix the following coccicheck warning:
drivers/video/fbdev/valkyriefb.c:348:10-11: WARNING comparing pointer to
0, suggest !E
drivers/video/fbdev/valkyriefb.c:334:12-13: WARNING comparing pointer to
0
drivers/video/fbdev/valkyriefb.c:348:10-11: WARNING comparing pointer to
0
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429140942.8137-1-yanaijie@huawei.com
Some memory is vmalloc'ed in the 'w100fb_save_vidmem' function and freed in
the 'w100fb_restore_vidmem' function. (these functions are called
respectively from the 'suspend' and the 'resume' functions)
However, it is also freed in the 'remove' function.
In order to avoid a potential double free, set the corresponding pointer
to NULL once freed in the 'w100fb_restore_vidmem' function.
Fixes: aac51f09d9 ("[PATCH] w100fb: Rewrite for platform independence")
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: <stable@vger.kernel.org> # v2.6.14+
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200506181902.193290-1-christophe.jaillet@wanadoo.fr
Fix the following coccicheck warning:
drivers/video/fbdev/aty/atyfb_base.c:3822:3-10: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/aty/atyfb_base.c:3824:3-9: WARNING: Assignment of
0/1 to bool variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422071854.513-1-yanaijie@huawei.com
Fix the following coccicheck warning:
drivers/video/fbdev/uvesafb.c:48:12-17: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1827:3-13: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1829:3-13: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1835:3-9: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1837:3-9: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1839:3-8: WARNING: Assignment of 0/1 to
bool variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422071845.403-1-yanaijie@huawei.com
Fix the following coccicheck warning:
drivers/video/fbdev/udlfb.c:67:12-19: WARNING: Assignment of 0/1 to bool
variable
drivers/video/fbdev/udlfb.c:68:12-20: WARNING: Assignment of 0/1 to bool
variable
drivers/video/fbdev/udlfb.c:69:12-18: WARNING: Assignment of 0/1 to bool
variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422071836.49123-1-yanaijie@huawei.com
Fix the following coccicheck warning:
drivers/video/fbdev/i810/i810_main.c:1969:3-7: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1971:3-8: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1973:3-9: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1975:3-7: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:2001:3-9: WARNING: Assignment of
0/1 to bool variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422071826.49038-1-yanaijie@huawei.com
Userspace can severely fragment rb_hole_addr rbtree by manipulating
alignment while allocating buffers. Fragmented rb_hole_addr rbtree
would result in large delays while allocating buffer object for a
userspace application. It takes long time to find suitable hole
because if we fail to find a suitable hole in the first attempt
then we look for neighbouring nodes using rb_prev()/rb_next().
Traversing rbtree using rb_prev()/rb_next() can take really long
time if the tree is fragmented.
This patch improves searches in fragmented rb_hole_addr rbtree by
modifying it to an augmented rbtree which will store an extra field
in drm_mm_node, subtree_max_hole. Each drm_mm_node now stores maximum
hole size for its subtree in drm_mm_node->subtree_max_hole. Using
drm_mm_node->subtree_max_hole, it is possible to eliminate a complete
subtree if that subtree is unable to serve a request hence reducing
number of rb_prev()/rb_next() used.
With this patch applied, 1 million bo allocs on amdgpu took ~8 sec,
compared to 50k bo allocs which took 28 sec without it.
partial test code:
int test_fragmentation(void)
{
int i = 0;
uint32_t minor_version;
uint32_t major_version;
struct amdgpu_bo_alloc_request request = {};
amdgpu_bo_handle vram_handle[MAX_ALLOC] = {};
amdgpu_device_handle device_handle;
request.alloc_size = 4096;
request.phys_alignment = 8192;
request.preferred_heap = AMDGPU_GEM_DOMAIN_VRAM;
int fd = open("/dev/dri/card0", O_RDWR | O_CLOEXEC);
amdgpu_device_initialize(fd, &major_version, &minor_version,
&device_handle);
for (i = 0; i < MAX_ALLOC; i++) {
amdgpu_bo_alloc(device_handle, &request, &vram_handle[i]);
}
for (i = 0; i < MAX_ALLOC; i++)
amdgpu_bo_free(vram_handle[i]);
return 0;
}
v2:
Use RB_DECLARE_CALLBACKS_MAX to maintain subtree_max_hole
v3:
insert_hole_addr() should be static a function
fix return value of next_hole_high_addr()/next_hole_low_addr()
Reported-by: kbuild test robot <lkp@intel.com>
v4:
Fix commit message.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/364341/
Signed-off-by: Christian König <christian.koenig@amd.com>
It was removed in:
Author: Christian König <christian.koenig@amd.com>
Date: Wed Sep 25 11:38:50 2019 +0200
drm/ttm: remove pointers to globals
Signed-off-by: Maya Rashish <coypu@sdf.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/360750/
Signed-off-by: Christian König <christian.koenig@amd.com>
Source file was dual licenced but the header was omitted, fix that.
Contributors for this file are:
Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper <matthew.d.roper@intel.com>
Maxime Ripard <mripard@kernel.org>
Noralf Trønnes <noralf@tronnes.org>
Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Emmanuel Vadot <manu@FreeBSD.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430153347.85323-1-manu@FreeBSD.org
The Amlogic S805X/Y uses the same die as the S905X, but with more
limited graphics capabilities.
This adds a soc version detection adding specific limitations on the HDMI
mode selections.
Here, we limit to HDMI 1.2a max HDMI PHY clock frequency.
Changes sinces v1:
- Moved frequency check in the vclk code, and also checks DMT modes
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: fixed commit message with HDMI 1.2a instead of HDMI 1.3a]
Link: https://patchwork.freedesktop.org/patch/msgid/20200428092147.13698-1-narmstrong@baylibre.com
This is a driver for video encoder with VGA and DVI/HDMI outputs.
There is no documentation for the chip -- the operation was guessed from
what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names
come from the ch7035 driver in Mediatek's GPL code dump.
Only bare minimum is implemented -- no fancy stuff, such as scaling. That
would only worsen our misery. We don't load the firmware and we don't need
to even bother enabling the MCU. There are probably no distributable
firmware images anyway.
Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60,
with VGA as well as DVI.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-4-lkundrak@v3.sk
AM65x PG1 has a HW issue with YUV pixel formats, resulting in wrong
colors on the screen. This issue is fixed in PG2 hardware.
The driver currently has code to hide YUV pixel formats from the
userspace. To support PG2, we would need to add code to detect the SoC
version and hide the YUV formats based on that.
However, as PG1 will be phased out and PG2 will be the main platform, a
much simpler solution is just to drop the code in question. The downside
is that the users will be able to use YUV formats on PG1, getting wrong
colors on the screen. On the other hand, that may also be a plus, as the
same applications will now work on PG1 and PG2, even if the colors are
wrong on PG1.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429121022.3871-1-tomi.valkeinen@ti.com
Reviewed-by: Jyri Sarha <jsarha@ti.com>
If the given videomode does not specify DISPLAY_FLAG_* for the specific
signal property, the driver used a default value. These defaults were
never thought through, as the expectation was that all the DISPLAY_FLAGS
are always set explicitly.
With DRM bridge and panel drivers this is not the case, and while that
issue should be resolved in the future, it's still good to have sane
signal defaults.
This patch changes the defaults to what the hardware has as reset
defaults. Also, based on my experience, I think they make sense and are
more likely correct than the defaults without this patch.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417114151.25843-1-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
fix boe_tv105wum_nw0 display shift.
Signed-off-by: David Lu <david.lu@bitland.com.cn>
Fixes: 963518c124 ("drm/panel: support for boe,tv105wum-nw0 dsi video mode panel")
Cc: David Lu <david.lu@bitland.com.cn>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[added fixes tag]
Link: https://patchwork.freedesktop.org/patch/msgid/20200428064521.21511-1-david.lu@bitland.com.cn
This converts the Synopsis MIPI DSI binding documentation to yaml and
should be quite straightforward. I've added a missing ref clk and also
added Philippe as maintainer b/c he's the original txt author following
the algorithm provided in Message-ID 20200420175909.GA5810@ravnborg.org.
Cc: Philippe CORNU <philippe.cornu@st.com>
Cc: devicetree@vger.kernel.org
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423100058.1734009-1-adrian.ratiu@collabora.com
The AUO G101EVN010 is a 18-bit LVDS panel, not a parallel panel, as
indicated by the current bus_format.
Fix the bus_format to MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, and also set the
connector_type to LVDS.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[updated patch subject]
Link: https://patchwork.freedesktop.org/patch/msgid/20200417114043.25381-1-tomi.valkeinen@ti.com
ITE Tech. Inc. (abbreviated as ITE ) is a professional fabless IC
design house. ITE's core technology includes PC and NB Controller chips,
Super I/O, High Speed Serial Interface, Video Codec, Touch Sensing,
Surveillance, OFDM, Sensor Fusion, and so on.
Our official name is "ITE Tech. Inc.", so change "ITE," to "ITE.".
more information on: http://www.ite.com.tw/
Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
Acked-by: Rob Herring <robh@kernel.org>
Fixes: 17ff9478ff ("dt-bindings: Add ITE Tech prefix")
Cc: Marek Vasut <marex@denx.de>
Cc: devicetree@vger.kernel.org
Cc: Allen Chen <allen.chen@ite.com.tw>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[added fixes tag and updated subject]
Link: https://patchwork.freedesktop.org/patch/msgid/1587979103-5630-2-git-send-email-allen.chen@ite.com.tw
In the file drm_dp_helper.h we have a macro named
DP_DSC_THROUGHPUT_MODE_{0,1}_UPSUPPORTED, the correct name should be
DP_DSC_THROUGHPUT_MODE_{0,1}_UNSUPPORTED. This commits adjusts this typo
in the header file and in other places that attempt to access this
macro.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429184142.1867987-1-Rodrigo.Siqueira@amd.com
The struct member 'set_config' was assigned twice:
static const struct drm_crtc_funcs ast_crtc_funcs = {
.reset = ast_crtc_reset,
.set_config = drm_crtc_helper_set_config,
......
.set_config = drm_atomic_helper_set_config,
......
};
Since the second one is which we use now in fact, we can remove the
first one.
This fixes the following coccicheck warning:
drivers/gpu/drm/ast/ast_mode.c:932:50-51: set_config: first occurrence
line 934, second occurrence line 937
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429141010.8445-1-yanaijie@huawei.com
Extend coverage of the blitter client by exercising conversion to and
from tiled sources. In the process we perform spot checks to verify that
the tiling/detiling is being applied correctly, along with position
invariance of the tiling parameters.
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430064957.14942-1-chris@chris-wilson.co.uk
We reduced the clocks slowly after a boost event based on the
observation that the smoothness of animations suffered. However, since
reducing the evalution intervals, we should be able to respond to the
rapidly fluctuating workload of a simple desktop animation and so
restore the more aggressive downclocking.
References: 2a8862d2f3 ("drm/i915: Reduce the RPS shock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-6-chris@chris-wilson.co.uk
We treat parking as a manual RPS timeout event, and downclock the GPU
for the next unpark and batch execution. However, having restored the
aggressive downclocking and observed that we have very light workloads
whose only interaction is through the manual parking events, carry over
the aggressive downclocking to the fake RPS events.
References: 21abf0bf16 ("drm/i915/gt: Treat idling as a RPS downclock event")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-5-chris@chris-wilson.co.uk
As with the realisation for soft-rc6, we respond to idling the engines
within microseconds, far faster than the response times for HW RC6 and
RPS. Furthermore, our fast parking upon idle, prevents HW RPS from
running for many desktop workloads, as the RPS evaluation intervals are
on the order of tens of milliseconds, but the typical workload is just a
couple of milliseconds, but yet we still need to determine the best
frequency for user latency versus power.
Recognising that the HW evaluation intervals are a poor fit, and that
they were deprecated [in bspec at least] from gen10, start to wean
ourselves off them and replace the EI with a timer and our accurate
busy-stats. The principle benefit of manually evaluating RPS intervals
is that we can be more responsive for better performance and powersaving
for both spiky workloads and steady-state.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1698
Fixes: 98479ada42 ("drm/i915/gt: Treat idling as a RPS downclock event")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-4-chris@chris-wilson.co.uk
In the near future, we will utilize the busy-stats on each engine to
approximate the C0 cycles of each, and use that as an input to a manual
RPS mechanism. That entails having busy-stats always enabled and so we
can remove the enable/disable routines and simplify the pmu setup. As a
consequence of always having the stats enabled, we can also show the
current active time via sysfs/engine/xcs/active_time_ns.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-1-chris@chris-wilson.co.uk
Some older versions of gcc badly optimize code that passes
an inline function argument into another function by reference,
causing huge stack usage:
drivers/gpu/drm/bridge/tc358768.c: In function 'tc358768_bridge_pre_enable':
drivers/gpu/drm/bridge/tc358768.c:840:1: error: the frame size of 2256 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
Use a temporary variable as a workaround and add a comment pointing
to the gcc bug.
Fixes: ff1ca6397b ("drm/bridge: Add tc358768 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428215408.4111675-1-arnd@arndb.de
powerpc allyesconfig fails like this:
drivers/video/fbdev/controlfb.c: In function 'controlfb_mmap':
drivers/video/fbdev/controlfb.c:756:23: error: implicit declaration of function 'pgprot_cached_wthru'; did you mean 'pgprot_cached'? [-Werror=implicit-function-declaration]
756 | vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot);
| ^~~~~~~~~~~~~~~~~~~
| pgprot_cached
drivers/video/fbdev/controlfb.c:756:23: error: incompatible types when assigning to type 'pgprot_t' {aka 'struct <anonymous>'} from type 'int'
Fix it by adding missing PPC32 dependency.
Fixes: a07a63b0e2 ("video: fbdev: controlfb: add COMPILE_TEST support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/fe520316-3863-e6c4-9581-5d709f49e906@samsung.com
We need to keep the default context state around to instantiate new
contexts (aka golden rendercontext), and we also keep it pinned while
the engine is active so that we can quickly reset a hanging context.
However, the default contexts are large enough to merit keeping in
swappable memory as opposed to kernel memory, so we store them inside
shmemfs. Currently, we use the normal GEM objects to create the default
context image, but we can throw away all but the shmemfs file.
This greatly simplifies the tricky power management code which wants to
run underneath the normal GT locking, and we definitely do not want to
use any high level objects that may appear to recurse back into the GT.
Though perhaps the primary advantage of the complex GEM object is that
we aggressively cache the mapping, but here we are recreating the
vm_area everytime time we unpark. At the worst, we add a lightweight
cache, but first find a microbenchmark that is impacted.
Having started to create some utility functions to make working with
shmemfs objects easier, we can start putting them to wider use, where
GEM objects are overkill, such as storing persistent error state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429172429.6054-1-chris@chris-wilson.co.uk
Let's just calculate the hsync rate on demand. No point in wasting
space storing it and risking the cached value getting out of sync
with reality.
v2: Move drm_mode_hsync() next to its only users
Drop the TODO
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-2-ville.syrjala@linux.intel.com
If intel_context_create() fails then it leads to an error pointer
dereference. I shuffled things around to make error handling easier.
Fixes: 1dd47b54ba ("drm/i915: Add live selftests for indirect ctx batchbuffers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429132425.GE815283@mwanda
MAINTAINERS got sorted in
commit 4400b7d68f ("MAINTAINERS: sort entries by entry name")
Merging from drm-next into drm-misc-next duplicated some of the
entries by restoring old, unsorted sections. Restore the sorted
list by removing the duplicates.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 08d99b2c23 ("Merge drm/drm-next into drm-misc-next")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423074003.9637-1-tzimmermann@suse.de
When building with clang + -Wuninitialized:
drivers/gpu/drm/i915/gt/debugfs_gt_pm.c:407:7: warning: variable
'rpcurupei' is uninitialized when used here [-Wuninitialized]
rpcurupei,
^~~~~~~~~
drivers/gpu/drm/i915/gt/debugfs_gt_pm.c:304:16: note: initialize the
variable 'rpcurupei' to silence this warning
u32 rpcurupei, rpcurup, rpprevup;
^
= 0
1 warning generated.
rpupei is assigned twice; based on the second argument to
intel_uncore_read, it seems this one should have been assigned to
rpcurupei.
Fixes: 9c878557b1 ("drm/i915/gt: Use the RPM config register to determine clk frequencies")
Link: https://github.com/ClangBuiltLinux/linux/issues/1016
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429030051.920203-1-natechancellor@gmail.com
