Aside from a few minor register changes and some different clock values,
cdclk design hasn't changed much since gen9lp. Let's consolidate the
handlers for bxt, cnl, and icl to keep the codeflow consistent.
Also, while we're at it, s/bxt_de_pll_update/bxt_de_pll_readout/ since
"update" makes me think we should be writing to hardware rather than
reading from it.
v2:
- Fix icl_calc_voltage_level() limits. (Ville)
- Use CNL_CDCLK_PLL_RATIO_MASK rather than BXT_DE_PLL_RATIO_MASK on
gen10+ to avoid confusion. (Ville)
v3:
- Also fix ehl_calc_voltage_level() limits. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910160520.6587-1-matthew.d.roper@intel.com
Empirical evidence from CI tells us that our rc6 setup for Tigerlake is
off. Disable rc6 on tgl temporary so that we gain CI coverage as we
prepare a fix. It also appears that the BIOS on our tgl leaves rc6
enabled, so we have to explicitly disable it on init.
References: https://bugs.freedesktop.org/show_bug.cgi?id=111593
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910161657.23037-1-chris@chris-wilson.co.uk
Currently, if there is time remaining before the start of the loop, we
do one full iteration over many possible different chunks within the
object. A full loop may take 50+s (depending on speed of indirect GTT
mmapings) and we try separately with LINEAR, X and Y -- at which point
igt times out. If we check more frequently, we will interrupt the loop
upon our timeout -- it is hard to argue for as this significantly reduces
the test coverage as we dramatically reduce the runtime. In practical
terms, the coverage we should prioritise is in using different fence
setups, forcing verification of the tile row computations over the
current preference of checking extracting chunks. Though the exhaustive
search is great given an infinite timeout, to improve our current
coverage, we also add a randomised smoketest of partial mmaps. So let's
do both, add a randomised smoketest of partial tiling chunks and the
exhaustive (though time limited) search for failures.
Even in adding another subtest, we should shave 100s off BAT! (With,
hopefully, no loss in coverage, at least over multiple runs.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910121009.13431-1-chris@chris-wilson.co.uk
As soon as we re-enable the various functions within the HW, they may go
off and read data via a GGTT offset. Hence, if we have not yet restored
the GGTT PTE before then, they may read and even *write* random locations
in memory.
Detected by DMAR faults during resume.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909110011.8958-4-chris@chris-wilson.co.uk
For cherryview, add hw read out to create hw blob of gamma
lut values.
Review comments from previous series:
https://patchwork.freedesktop.org/patch/328252
v4: -No need to initialize *blob [Jani]
-Removed right shifts [Jani]
-Dropped dev local var [Jani]
v5: -Returned blob instead of assigning it internally within the
function [Ville]
-Renamed function cherryview_get_color_config() to chv_read_luts()
-Renamed cherryview_get_gamma_config() to chv_read_cgm_gamma_lut()
[Ville]
v9: -80 character limit [Uma]
-Made read func para as const [Ville, Uma]
-Renamed chv_read_cgm_gamma_lut() to chv_read_cgm_gamma_lut()
[Ville, Uma]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1568030503-26747-4-git-send-email-swati2.sharma@intel.com
For i965, add hw read out to create hw blob of gamma
lut values.
Review comments from old series:
https://patchwork.freedesktop.org/series/58039/
v4: -No need to initialize *blob [Jani]
-Removed right shifts [Jani]
-Dropped dev local var [Jani]
v5: -Returned blob instead of assigning it internally
within the function [Ville]
-Renamed i965_get_color_config() to i965_read_lut() [Ville]
-Renamed i965_get_gamma_config_10p6() to i965_read_gamma_lut_10p6()
[Ville]
v9: -Typo and 80 character limit [Uma]
-Made read func para as const [Ville, Uma]
-Renamed i965_read_gamma_lut_10p6() to i965_read_lut_10p6() [Ville, Uma]
v10: -Swapped ldw and udw while creating hw blob [Jani]
-Added last index rgb lut value from PIPEGCMAX to h/w blob [Jani]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1568030503-26747-3-git-send-email-swati2.sharma@intel.com
intel_color_get_gamma_bit_precision() is extended for
cherryview by adding chv_gamma_precision(), i965 will use existing
i9xx_gamma_precision() func only.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1568030503-26747-2-git-send-email-swati2.sharma@intel.com
During reset, we try to ensure no forward progress of the CS prior to
the reset by setting the STOP_RING bit in RING_MI_MODE. Since gen9, this
register is context saved and do we end up in the odd situation where we
save the STOP_RING bit and so try to stop the engine again immediately
upon resume. This is quite unexpected and causes us to complain about an
early CS completion event!
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111514
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910080208.4223-1-chris@chris-wilson.co.uk
It might prove useful in the future to know if the vma is utilising
huge-GTT-pages. Related to this is the GTT cache, where there is some HW
"quirkiness" where it must be disabled if using 2M pages, so include
that for good measure.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909171646.22090-1-matthew.auld@intel.com
Try to tidy up the cache-coloring such that we rid the code of any
mm.color_adjust assumptions, this should hopefully make it more obvious
in the code when we need to actually use the cache-level as the color,
and as a bonus should make adding a different color-scheme simpler.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909124052.22900-3-matthew.auld@intel.com
Make it clear that the color adjust callback applies to the ggtt.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909124052.22900-2-matthew.auld@intel.com
Export color_differs so that we can use it elsewhere.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909124052.22900-1-matthew.auld@intel.com
As we may unwind incomplete requests (for preemption) prior to
processing the CSB and the schedule-out events, we may update rq->engine
(resetting it to point back to the parent virtual engine) prior to
calling execlists_schedule_out(), invalidating the assertion that the
request still points to the inflight engine. (The likelihood of this is
increased if the CSB interrupt processing is pushed to the ksoftirqd for
being too slow and direct submission overtakes it.)
Tvrtko summarised it as:
"So unwind from direct submission resets rq->engine and races with
process_csb from the tasklet which notices request has actually
completed."
Reported-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Fixes: df40306902 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190907105046.19934-1-chris@chris-wilson.co.uk
We are meant to register the kmem cache at init, such the supplied exit
and shrink hooks can be called.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905072921.7979-1-matthew.auld@intel.com
Refactor the GT power management interface to work through the GT now
that it is under the control of gt/
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905111403.10071-1-andi.shyti@intel.com
Gen12 has subtle changes in the reg state context offsets (some fields
are gone, some are in a different location), compared to previous Gens.
The simplest approach seems to be keeping Gen12 (and future platform)
changes apart from the previous gens, while keeping the registers that
are contiguous in functions we can reuse.
v2: alias, virtual engine, rpcs, prune unused regs
v3: use engine base (Daniele), take ctx_bb for all
Bspec: 46255
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Tested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
[ickle: Tweaked the GEM_WARN_ON after settling on a compromise with
Daniele]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906122314.2146-2-mika.kuoppala@linux.intel.com
Daniele pointed out that relative mmio works differently in
on context restore. Instead of adding the engine mmio base to offset,
it masks out the base and adds bits [12:2] to current engine base.
This should allow us to construct context register state to be
applicable to all instances, including virtual. And avoid the trouble
of updating the registers on virtual instances when submitting work.
v2: only enable for gen12 for now (Mika)
v3: make enabling readable (Chris)
Bspec: 20206
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906134957.25909-1-mika.kuoppala@linux.intel.com
Unlike gen11, which always ran at 50MHz when the cdclk PLL was disabled,
TGL runs at refclk/2. The 50MHz croclk/2 is only used by hardware
during some power state transitions.
Bspec: 49201
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905181337.23727-1-matthew.d.roper@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
If we make sure we grab a strong reference to each object as we dump it,
we can reduce the locks outside of our iterators to an rcu_read_lock.
This should prevent errors like:
[ 2138.371911] BUG: KASAN: use-after-free in per_file_stats+0x43/0x380 [i915]
[ 2138.371924] Read of size 8 at addr ffff888223651000 by task cat/8293
[ 2138.371947] CPU: 0 PID: 8293 Comm: cat Not tainted 5.3.0-rc6-CI-Custom_4352+ #1
[ 2138.371953] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.40 07/14/2017
[ 2138.371959] Call Trace:
[ 2138.371974] dump_stack+0x7c/0xbb
[ 2138.372099] ? per_file_stats+0x43/0x380 [i915]
[ 2138.372108] print_address_description+0x73/0x3a0
[ 2138.372231] ? per_file_stats+0x43/0x380 [i915]
[ 2138.372352] ? per_file_stats+0x43/0x380 [i915]
[ 2138.372362] __kasan_report+0x14e/0x192
[ 2138.372489] ? per_file_stats+0x43/0x380 [i915]
[ 2138.372502] kasan_report+0xe/0x20
[ 2138.372625] per_file_stats+0x43/0x380 [i915]
[ 2138.372751] ? i915_panel_show+0x110/0x110 [i915]
[ 2138.372761] idr_for_each+0xa7/0x160
[ 2138.372773] ? idr_get_next_ul+0x110/0x110
[ 2138.372782] ? do_raw_spin_lock+0x10a/0x1d0
[ 2138.372923] print_context_stats+0x264/0x510 [i915]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903062133.27360-1-chris@chris-wilson.co.uk
Tiger Lake has up to 4 pipes so the mask would need to be 0xf instead of
0x7. Do not hardcode the mask so it allows the fake MST encoders to
connect to all pipes no matter how many the platform has.
Iterating over all pipes to keep consistent with intel_ddi_init().
Initialy this patch was replaced by commit 4eaceea3a0 ("drm/i915:
Fix DP-MST crtc_mask") but userspace it not correctly using
encoder.possible_crtcs and it was reverted by
commit e838bfa8e1 ("Revert "drm/i915: Fix DP-MST crtc_mask"")
Userspace should be fixed but it might take a while, so bringing this
patch back for now.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904230241.20638-2-jose.souza@intel.com
WA 1409120013 is also valid for TGL, so lets check for ">= 11".
BSpec: 52890
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904230241.20638-1-jose.souza@intel.com
Add case for gen == 12 and add MISSING_CASE() for future gens. We were
already handling gen12 as the default, so this doesn't change the
current behavior.
BSpec: 19481 and 44980
Cc: CQ Tang <cq.tang@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-7-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
SAGV is not currently working for Tiger Lake. We better disable it until
the implementation is stabilized and we can enable it.
HSDES: 1409542895 2208191909
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-6-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Gen 12 onwards moves the DP_TP_* registers to be transcoder-based rather
than port-based. This adds the new register addresses and changes all
the callers to use the register saved in intel_dp->regs.*. This is
filled out when preparing to enable the port so we take into account if
we should use the transcoder or the port.
v2: reimplement by stashing the registers we want to access under
intel_dp->reg. Now they are initialized when enabling the port.
Ville suggested to store the transcoder to be used exclusively
by TGL+. After implementing I thought just storing the register directly
made it cleaner.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-5-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
DP_TP_{CTL,STATUS} should only be programmed when the encoder is intel_dp.
Checking its current usages intel_disable_ddi_buf() is the only
offender, with other places being protected by checks like
pipe_config->fec_enable that is only set by intel_dp.
v3 (José):
- Using intel_crtc_has_dp_encoder() instead of intel_encoder_is_dp()
(Ville)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-4-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
For older gens PSR IIR and IMR have fixed addresses. From TGL onwards those
registers moved to each transcoder offset. The bits for the registers
are defined without an offset per transcoder as right now we have one
register per transcoder. So add a fake "trans_shift" when calculating
the bits offsets: it will be 0 for gen12+ and psr.transcoder otherwise.
v2 (Lucas): change the implementation to use trans_shift instead of
getting each bit value with a different macro
Cc: Imre Deak <imre.deak@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-3-jose.souza@intel.com
It was enabling and checking PSR interruptions in every transcoder
while it should keep the interruptions on the non-used transcoders
masked.
While doing this it gives us trouble on Tiger Lake if we are
reading/writing to registers of disabled transcoders since from gen12
onwards the registers are relative to the transcoder. Instead of forcing
them ON to access those registers, just avoid the accesses as they are
not needed.
v2 (Lucas):
- Explain why we can't keep accessing all transcoders
- Remove TODO about extending the irq handling to multiple instances:
when/if implementing multiple instances it's pretty clear by the
singleton psr that it needs to be extended
- Fix intel_psr_debug_set() calling psr_irq_control() with
psr.transcoder not set yet (from Imre). Now we only set the debug
register right away if psr is already enabled. Otherwise we just
record the value to be set when enabling the source.
- Do not depend on the value of TRANSCODER_A. Just be relative to it
(from Imre)
- handle psr error last so we don't schedule the work before handling
the other flags
v3:
- Adding a warning about setting reserverd bits on EDP_PSR_IMR
Cc: Imre Deak <imre.deak@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-2-jose.souza@intel.com
The cpu (de)tiler hw is gone, this stopped being useful. Plus it never
supported any of the fancy new tiling formats, which means userspace
also stopped using the magic side-channel this provides.
This would totally break a lot of the igts, but they're already broken
for the same reasons as userspace on gen12 would be.
v2: Look at ggtt->num_fences instead, that also avoids the need for a
comment (Chris). This also means that gen12 support really needs to
make sure num_fences is set to 0. There is a patch for that, but it
checks for HAS_MAPPABLE_APERTURE, which I'm not sure is the right
thing really. Adding relevant people.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820195451.15671-1-daniel.vetter@ffwll.ch
This reverts commit 4eaceea3a0.
Several userspace clients (modesetting ddx and mutter+wayland at least)
handle encoder.possible_crtcs incorrectly. What they essentially do is
the following:
possible_crtcs = ~0;
for_each_possible_encoder(connector)
possible_crtcs &= encoder->possible_crtcs;
Ie. they calculate the intersection of the possible_crtcs
for the connector when they really should be calculating the
union instead.
In our case each MST encoder now has just one unique bit set,
and so the intersection is always zero. The end result is that
MST connectors can't be lit up because no crtc can be found to
drive them.
I've submitted a fix for the modesetting ddx [1], and complained
on #wayland about mutter, so hopefully the situation will improve
in the future. In the meantime we have regression, and so must go
back to the old way of misconfiguring possible_crtcs in the kernel.
[1] https://gitlab.freedesktop.org/xorg/xserver/merge_requests/277
Cc: Jonas Ådahl <jadahl@gmail.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111507
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903154018.26357-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
This bit was fliped on for "syncing dependencies between camera and
graphics". BSpec has no recollection why, and it is causing
unrecoverable GPU hangs with Vulkan compute workloads.
From BSpec, setting bit5 to 0 enables relaxed padding requirements for
buffers, 1D and 2D non-array, non-MSAA, non-mip-mapped linear surfaces;
and *must* be set to 0h on skl+ to ensure "Out of Bounds" case is
suppressed.
Reported-by: Jason Ekstrand <jason@jlekstrand.net>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110998
Fixes: 8424171e13 ("drm/i915/gen9: h/w w/a: syncing dependencies between camera and graphics")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: denys.kostin@globallogic.com
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.1+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904100707.7377-1-chris@chris-wilson.co.uk
For glk, add hw read out to create hw blob of gamma
lut values.
v4: -No need to initialize *blob [Jani]
-Removed right shifts [Jani]
-Dropped dev local var [Jani]
v5: -Returned blob instead of assigning it internally within the
function [Ville]
-Renamed glk_get_color_config() to glk_read_luts() [Ville]
-Added degamma validation [Ville]
v9: -80 character limit [Uma]
-Made read func para as const [Ville, Uma]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-8-git-send-email-swati2.sharma@intel.com
For ilk, add hw read out to create hw blob of gamma
lut values.
v4: -No need to initialize *blob [Jani]
-Removed right shifts [Jani]
-Dropped dev local var [Jani]
v5: -Returned blob instead of assigning it internally within the
function [Ville]
-Renamed ilk_get_color_config() to ilk_read_luts() [Ville]
v9: -80 character limit [Uma]
-Made read func para as const [Ville, Uma]
-Renamed ilk_read_gamma_lut() to ilk_read_lut_10() [Uma, Ville]
v10: -Made ilk_read_luts() static [Jani]
-ilk_load_lut_10 has lut_size, not (lut_size - 1) [Jani]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-7-git-send-email-swati2.sharma@intel.com
For the legacy(gen < 4) gamma, add hw read out to create hw blob of gamma
lut values. Also, add function intel_color_lut_pack to convert hw value
with given bit precision to lut property val.
v4: -No need to initialize *blob [Jani]
-Removed right shifts [Jani]
-Dropped dev local var [Jani]
v5: -Returned blob instead of assigning it internally within the
function [Ville]
-Renamed function i9xx_get_color_config() to i9xx_read_luts()
-Renamed i9xx_get_config_internal() to i9xx_read_lut_8() [Ville]
v9: -Change in commit message [Jani, Uma]
-Wrap commit within 75 characters [Uma]
-Use macro for 256 [Uma]
-Made read func para as const [Ville, Uma]
v10: -Made i9xx_read_luts() static [Jani]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-6-git-send-email-swati2.sharma@intel.com
Add macro to compare hw/sw gamma lut values. First need to
check whether hw/sw gamma mode matches or not. If not
no need to compare lut values, if matches then only compare
lut entries.
v5: -Called PIPE_CONF_CHECK_COLOR_LUT inside if (!adjust) [Jani]
-Added #undef PIPE_CONF_CHECK_COLOR_LUT [Jani]
v8: -Added check for gamma mode before gamma lut entry comparison
[Jani]
-Split patch 3 into 4 patches
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-5-git-send-email-swati2.sharma@intel.com
Add func intel_color_lut_equal() to compare hw/sw gamma
lut values. Since hw/sw gamma lut sizes and lut entries comparison
will be different for different gamma modes, add gamma mode dependent
checks.
v3: -Rebase
v4: -Renamed intel_compare_color_lut() to intel_color_lut_equal() [Jani]
-Added the default label above the correct label [Jani]
-Corrected smatch warn "variable dereferenced before check"
[Dan Carpenter]
v5: -Added condition (!blob1 && !blob2) return true [Jani]
v6: -Made patch11 as patch3 [Jani]
v8: -Split patch 3 into 4 patches
-Optimized blob check condition [Ville]
v9: -Exclude spilt gamma mode (bdw and ivb platforms)
as there is exception in way gamma values are written in
hardware [Ville]
-Added exception made in commit [Uma]
-Dropped else, character limit and indentation [Uma]
-Added multi segmented gama mode for icl+ platforms [Uma]
v10: -Dropped multi segmented mode for icl+ platforms [Jani]
-Removed references of sw and hw state in compare code [Jani]
-Dropped inline from func [Jani]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-4-git-send-email-swati2.sharma@intel.com
Each platform supports different gamma modes and each gamma mode
has different bit precision. Here bit precision corresponds
to number of bits the hw LUT supports.
Add func per platform to return bit precision corresponding to gamma mode
which will be later used as a parameter in lut comparison function
intel_color_lut_equal().
This is done for legacy, ilk, glk and their variant platforms.
v6: -Added func intel_color_get_bit_precision() to get bit precision for
gamma and degamma lut readout depending upon platform and
corresponding to load_luts() [Ankit]
-Made patch11 as patch3 [Jani]
v7: -Renamed func intel_color_get_bit_precision() to
intel_color_get_gamma_bit_precision()
-Added separate function/platform for gamma bit precision [Ville]
-Corrected checkpatch warnings
v8: -Split patch 3 into 4 separate patches
v9: -Changed commit message, gave more info [Uma]
-Added precision func for icl+ platform
v10: -Removed precision func for chv and icl+ platforms [Jani]
-Added gamma_enable check once [Jani]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-2-git-send-email-swati2.sharma@intel.com
Add debug log for color related parameters like gamma_mode, gamma_enable,
csc_enable, etc inside intel_dump_pipe_config().
v6: -Added debug log for color para in intel_dump_pipe_config [Jani]
v7: -Split patch 3 into 4 patches
v8: -Corrected alignment [Uma]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-3-git-send-email-swati2.sharma@intel.com
It's been a long time since we accidentally reported -EIO upon wedging,
it can now only be generated by failure to swap in a page.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902040303.14195-4-chris@chris-wilson.co.uk
obj->pin_global was originally used as a means to keep the shrinker off
the active scanout, but we use the vma->pin_count itself for that and
the obj->frontbuffer to delay shrinking active framebuffers. The other
role that obj->pin_global gained was for spotting display objects inside
GEM and working harder to keep those coherent; for which we can again
simply inspect obj->frontbuffer directly.
Coming up next, we will want to manipulate the pin_global counter
outside of the principle locks, so would need to make pin_global atomic.
However, since obj->frontbuffer is already managed atomically, it makes
sense to use that the primary key for display objects instead of having
pin_global.
Ville pointed out the principle difference is that obj->frontbuffer is
set for as long as an intel_framebuffer is attached to an object, but
obj->pin_global was only raised for as long as the object was active. In
practice, this means that we consider the object as being on the scanout
for longer than is strictly required, causing us to be more proactive in
flushing -- though it should be true that we would have flushed
eventually when the back became the front, except that on the flip path
that flush is async but when hit from another ioctl it will be
synchronous.
v2: i915_gem_object_is_framebuffer()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902040303.14195-5-chris@chris-wilson.co.uk
The aliasing-ppgtt is not allowed to be smaller than the ggtt, nor
should we advertise it as being any bigger, or else we may get sued for
false advertisement.
Testcase: igt/gem_exec_big
Fixes: 0b718ba1e8 ("drm/i915/gtt: Downgrade Cherryview back to aliasing-ppgtt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902040303.14195-1-chris@chris-wilson.co.uk
Reogranize the HDMI deep color state computation to just
loop over possible bpc values. Avoids having to maintain
so many variants of the clock etc.
The current code also looks confused w.r.t. port_clock vs.
bw_constrained. It would happily update port_clock for
deep color but then not actually enable deep color due to
bw_constrained being set. The new logic handles that case
correctly.
v2: Pull stuff into separate funcs (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828183424.7856-1-ville.syrjala@linux.intel.com
enum port is a mess now because it no longer matches the spec
at all. Let's start to dig ourselves out of this hole by
reducing our reliance on port_name(). This should at least make
a bunch of debug messages a bit more sensible while we think how
to fill the the hole properly.
Based on the following cocci script with a lot of manual cleanup
(all the format strings etc.):
@@
expression E;
@@
(
- port_name(E->port)
+ E->base.base.id, E->base.name
|
- port_name(E.port)
+ E.base.base.id, E.base.name
)
@@
enum port P;
expression E;
@@
P = E->port
<...
- port_name(P)
+ E->base.base.id, E->base.name
...>
@@
enum port P;
expression E;
@@
P = E.port
<...
- port_name(P)
+ E.base.base.id, E.base.name
...>
@@
expression E;
@@
{
- enum port P = E;
... when != P
}
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830182719.32608-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
My attempt at allowing MST to use the higher color depths has
regressed some configurations. Apparently people have setups
where all MST streams will fit into the DP link with 8bpc but
won't fit with higher color depths.
What we really should be doing is reducing the bpc for all the
streams on the same link until they start to fit. But that requires
a bit more work, so in the meantime let's revert back closer to
the old behavior and limit MST to at most 8bpc.
Cc: stable@vger.kernel.org
Cc: Lyude Paul <lyude@redhat.com>
Tested-by: Geoffrey Bennett <gmux22@gmail.com>
Fixes: f147721986 ("drm/i915: Remove the 8bpc shackles from DP MST")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111505
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828102059.2512-1-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
We use the context->pin_mutex to serialise updates to the OA config and
the registers values written into each new context. Document this
relationship and assert we do hold the context->pin_mutex as used by
gen8_configure_all_contexts() to serialise updates to the OA config
itself.
v2: Add a white-lie for when we call intel_gt_resume() from init.
v3: Lie while we have the context pinned inside atomic reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190830181929.18663-1-chris@chris-wilson.co.uk
The bspec was recently updated with these new cdclk values for ICL, EHL,
and TGL.
Bspec: 20598
Bspec: 49201
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826225540.11987-3-matthew.d.roper@intel.com
The bspec has just recently been updated with new cdclk values that
require the use of a /2 CD2X divider rather than a /1 divider. Once we
add the divider selection logic to ICL+ cdclk programming, we have
pretty much the same logic we were already using on CNL, so it's simpler
to drop icl_set_cdclk() completely and reuse cnl_set_cdclk() on gen11+
platforms as well.
v2:
- Using ICL_CDCLK_CD2X_PIPE_NONE + BXT_CDCLK_CD2X_PIPE(pipe) for TGL is
correct, but looks really confusing. Add some TGL_ macros that alias
these to avoid confusion. (Ville)
- Use DIV_ROUND_CLOSEST rather than / when applying the divider. (Ville)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830004828.19359-1-matthew.d.roper@intel.com
When we moved the code to disable crtc's to a separate patch,
we forgot to ensure that for_each_oldnew_intel_crtc_in_state_reverse()
was moved as well.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 66d9cec8a6 ("drm/i915/display: Move the commit_tail() disable sequence to separate function")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830101644.8740-1-maarten.lankhorst@linux.intel.com
This is no longer used anywhere and so can be removed. However, tracking
the dirty status on the ppgtt doesn't work very well if the ppgtt is
shared, so perhaps for the best that it is no longer required.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830180000.24608-3-chris@chris-wilson.co.uk
With the upcoming change in timing (dramatically reducing the latency
between manipulating the ppGTT and execution), no amount of tweaking
could save Cherryview, it would always fail to invalidate its TLB.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830180000.24608-2-chris@chris-wilson.co.uk
With the upcoming change in timing (dramatically reducing the latency
between manipulating the ppGTT and execution), no amount of tweaking
could save Baytrail, it would always fail to invalidate its TLB. Ville
was right, Baytrail is beyond hope.
v2: Rollback on all gen7; same timing instability on TLB invalidation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830180000.24608-1-chris@chris-wilson.co.uk
Use a single function to setup the SDE irq and make MCC, ICP and TGP use
it, just like was done for the irq handler.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829211526.30525-4-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Ice Lake, Tiger Lake and Elkhart Lake all have different port
configurations and all of them can be parameterized the same way to form
the SDE hotplug bitmask. Avoid making them a special case an just use
the parameterized macros.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829211526.30525-3-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
The differences are only on the pins, trigger and long_detect function.
The MCC handling is already partially merged, so merge TGP as well.
Remove the pins argument from icp_irq_handler() so we have all the
differences between the 3 set in a common if ladder.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829211526.30525-2-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
South, follow the north.
Instead of defining separate macros for each port, make them take port
as parameter as done for TC ports and for north engine. This will allow
us to easily extend this as needed.
tgp_ddi_port_hotplug_long_detect() is also removed as after the EHL
introduction the tgp variant is an exact copy of icp.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829211526.30525-1-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
>From Gen12 onwards, HDCP HW block is implemented within transcoders.
Till Gen11 HDCP HW block was part of DDI.
Hence required changes in HW programming is handled here.
As ME FW needs the transcoder detail on which HDCP is enabled
on Gen12+ platform, we are populating the detail in hdcp_port_data.
v2:
_MMIO_TRANS is used [Lucas and Daniel]
platform check is moved into the caller [Lucas]
v3:
platform check is moved into a macro [Shashank]
v4:
Few optimizations in the coding [Shashank]
v5:
Fixed alignment in macro definition in i915_reg.h [Shashank]
unused variables "reg" is removed.
v6:
Configuring the transcoder at compute_config.
transcoder is used instead of pipe in macros.
Rebased.
v7:
transcoder is cached at intel_hdcp
hdcp_port_data is configured with transcoder index asper ME FW.
v8:
s/trans/cpu_transcoder
s/tc/cpu_transcoder
v9:
rep_ctl is prepared for TCD too.
return moved into deault of rep_ctl prepare function [Shashank]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-7-ramalingam.c@intel.com
On gen12+ platforms, HDCP HW is associated to the transcoder.
Hence on every modeset update associated transcoder into the
intel_hdcp of the port.
v2:
s/trans/cpu_transcoder [Jani]
v3:
comment is added for fw_ddi init for gen12+ [Shashank]
only hdcp capable transcoder is translated into fw_tc [Shashank]
v4:
fw_tc initialization is kept for modeset. [Tomas]
few extra doc is added at port_data init [Tomas]
v5:
Few comments are improvised [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-6-ramalingam.c@intel.com
We dont need the definition of the enum port outside I915, anymore.
Hence move enum port definition into I915 driver itself.
v2:
intel_display.h is included in intel_hdcp.h
v3:
enum port is declared in headers.
v4:
commit msg is rephrased.
v5:
copyright year is updated [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-3-ramalingam.c@intel.com
I915 converts it's port value into ddi index defiend by ME FW
and pass it as a member of hdcp_port_data structure.
Hence expose the enum mei_fw_ddi to I915 through
i915_mei_interface.h.
v2:
Copyright years are bumped [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-2-ramalingam.c@intel.com
The addition of the DC_FLUSH failed to ensure sanctity of the post-sync
write as CI immediately got a completion CS-event before the breadcrumb
was coherent. So let's try the other idea of moving the post-sync write
into the CS_STALL.
References: https://bugs.freedesktop.org/show_bug.cgi?id=111514
References: e8f6b4952e ("drm/i915/execlists: Flush the post-sync breadcrumb write harder")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829081150.10271-2-chris@chris-wilson.co.uk
Create a new function intel_commit_modeset_disables() consistent
with the naming in drm atomic helpers and similar to the enable function.
This helps better organize the disable sequence in atomic_commit_tail()
No functional change
v4:
* Do not create a function pointer, just a function (Maarten)
v3:
* Rebase (Manasi)
v2:
* Create a helper for old_crtc_state disables (Lucas)
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828224701.422-1-manasi.d.navare@intel.com
This patch has no functional changes. This just renames the update_crtcs()
hooks to commit_modeset_enables() to match the drm_atomic helper naming
conventions.
v2:
* Rebase on drm-tip
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827221735.29351-2-manasi.d.navare@intel.com
The sg_table for our backing store might contain addresses from
stolen-memory or in the future local-memory, at which point this is no
longer a dma-iterator. As a consequence we should now break on NULL
iter.sgp, instead of dmap == 0 which is considered an invalid dma
address.
As a bonus, gcc much prefers this construct,
Function old new delta
gen8_ggtt_insert_entries 211 192 -19
gen6_ggtt_insert_entries 292 262 -30
i915_error_object_create 996 954 -42
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829201919.21493-1-matthew.auld@intel.com
During normal driver unload we attempt to disable GuC communication
while it is currently stopped. This results in a nop'd call to
intel_guc_ct_disable within guc_disable_communication because
stop/disable rely on the same flag to prevent further comms with CT.
We can avoid the call to disable and still leave communication in a
satisfactory state by extracting a set of shared steps from stop/disable.
This set can include guc_disable_interrupts as we do not require the
single caller of guc_stop_communication to be atomic:
"drm/i915/selftests: Fixup atomic reset checking".
This situation (stop -> disable) only occurs during intel_uc_fini_hw,
so during fini, call guc_disable_communication only if currently enabled.
The symmetric calls to enable/disable remain unmodified for all other
scenarios.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110943
Signed-off-by: Fernando Pacheco <fernando.pacheco@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829174154.14675-1-fernando.pacheco@intel.com
Let the scheduler have a breather in between passes of the longer buddy
tests. Important if we are running under kasan etc and this takes far
longer than usual!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829170848.969-1-chris@chris-wilson.co.uk
According to BSpc if link standby is set on TGL+, PSR will not be
enabled. Vendors should not use panels that requires link standby and
even if they do, panel should assert a PSR error that will cause PSR to
be disabled.
BSpec: 50434
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-8-lucas.demarchi@intel.com
Yf tiling was removed in gen-12, so do not expose Yf modifiers to user
space. Gen-12 display also is incompatible with pre-gen12 Y-tiled
CCS, so do not expose I915_FORMAT_MOD_Y_TILED_CCS.
v2: Rebase to carry forward recently added gen11 formats.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827084516.6748-1-dhinakaran.pandiyan@intel.com
DSC was not supported on Pipe A for previous platforms. Tigerlake onwards,
all the pipes support DSC. Hence, the DSC and FEC restriction on
Pipe A needs to be removed.
v2: Changes in the logic around removing the restriction around
Pipe A (Manasi, Lucas)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823004655.28905-1-madhumitha.tolakanahalli.pradeep@intel.com
Trust our own workers to not cause unnecessary delays and disable the
automatic timeout on their asynchronous fence waits. (Along the same
lines that we trust our own requests to complete eventually, if
necessary by force.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826072149.9447-6-chris@chris-wilson.co.uk
There is a difference in BSpec's and the driver's designation of DDI
ports. BSpec uses the following names:
- before GEN11:
BSpec/driver:
port A/B/C/D etc
- GEN11:
BSpec/driver:
port A-F
- GEN12:
BSpec:
port A/B/C for combo PHY ports
port TC1-6 for Type C PHY ports
driver:
port A-I.
The driver's port D name matches BSpec's TC1 port name.
So far power domains were named according to the BSpec designation, to
make it easier to match the code against the specification. That however
can be confusing when a power domain needs to be matched to a port on
GEN12+. To resolve that use the driver's port A-I designation for power
domain names too and rename the corresponding power wells so that they
reflect the mapping from the driver's to BSpec's port name.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823100711.27833-1-imre.deak@intel.com
We've been ignoring similar coherency issues in IGT for Broadwater, and
specifically Broadwater (original gen4) and not, for example, Crestline
(same generation as Broadwater, but the mobile variant). Without any
means to reproduce locally (I have a 965GM but alas no 965G), fixing will
be slow, so tell CI to ignore any failure until we are ready with a fix.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826133837.6784-1-chris@chris-wilson.co.uk
Our current avoidance of non readable mcr range was not
inclusive enough. Extend the start and end.
References: HSDES#1405586840
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809145653.2279-1-mika.kuoppala@linux.intel.com
Quite rarely we see that the CS completion event fires before the
breadcrumb is coherent, which presumably is a result of the CS_STALL not
waiting for the post-sync operation. Try throwing in a DC_FLUSH into
the following pipecontrol to see if that makes any difference.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827120615.31390-1-chris@chris-wilson.co.uk
igt_ctx_exec allocates a new context for each iteration, keeping them
all allocated until the end. Instead, release the local ctx reference at
the end of each iteration, allowing ourselves to reap those if under
mempressure.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827161726.3640-2-chris@chris-wilson.co.uk
Upon object creation for live_gem_contexts, we fill the object with
known scratch and flush it out of the CPU cache. Before performing the
GPU fill, we don't need to flush it again and so avoid serialising with
previous fills.
However, we do need some throttling on the internal interfaces if we do
not want to run out of memory!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827161726.3640-1-chris@chris-wilson.co.uk
The CS pre-parser can pre-fetch commands across memory sync points and
starting from gen12 it is able to pre-fetch across BB_START and BB_END
boundaries as well, so when we emit gpu relocs the pre-parser might
fetch the target location of the reloc before the memory write lands.
The parser can't pre-fetch across the ctx switch, so we use a separate
context to guarantee that the memory is synchronized before the parser
can get to it.
Note that there is no risk of the CS doing a lite restore from the reloc
context to the user context, even if the two have the same hw_id,
because since gen11 the CS also checks the LRCA when deciding if it can
lite-restore.
v2: limit new context to gen12+, release in eb_destroy, add a comment
in emit_fini_breadcrumb (Chris).
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827185805.21799-1-daniele.ceraolospurio@intel.com
Compared to Icelake, Tigerlake's MAX_CONTEXT_HW_ID is smaller by one, but
since we just use the upper 32 bits of the lrc_desc, it's guaranteed OA
will use the correct one.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-19-lucas.demarchi@intel.com
On TGL some registers moved from DDI to transcoder and the
DisplayPort training sequence has a separate BSpec page.
I started adding 'ifs' to the original intel_ddi_pre_enable_dp() but
it was becoming really hard to follow, so a new and cleaner function
for TGL was added with comments of all steps. It's similar to ICL,
but different enough to deserve a new function.
The rest of DisplayPort enable and the whole disable sequences
remained the same.
v2: FEC and DSC should be enabled on sink side before start link
training(Maarten reported and Manasi confirmed the DSC part)
v3: Add call to enable FEC on step 7.l(Manasi)
BSpec: 49190
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-16-lucas.demarchi@intel.com
Disable CRTC/pipes in reverse order because some features (MST in
TGL+) requires master and slave relationship between pipes, so it
should always pick the lowest pipe as master as it will be enabled
first and disable in the reverse order so the master will be the last
one to be disabled.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-13-lucas.demarchi@intel.com
Same as for_each_oldnew_intel_crtc_in_state() but iterates in reverse
order.
v2: Fix additional blank line
v3: Rebase
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-12-lucas.demarchi@intel.com
TGL PSR2 HW supports a bigger resolution, so lets add it
BSpec: 50422, 49199
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-10-lucas.demarchi@intel.com
On TGL+ it's possible to have PSR1 enabled in other ports besides DDIA.
PSR2 is still limited to DDIA. However currently we handle only one
instance of PSR struct. Lets guard intel_psr_init_dpcd() against
multiple eDP panels and warn about it.
v2: Reword commit message to be TGL+ only and with the info where
PSR1/PSR2 are supported (Lucas)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-6-lucas.demarchi@intel.com
The point of debug_object_activate is to mark the first, and only the
first, acquisition. The object then remains active until the last
release. However, we marked up all successful first acquires even though
we allowed concurrent parties to try and acquire the i915_active
simultaneously (serialised by the i915_active.mutex).
Testcase: igt/gem_mmap_gtt/fault-concurrent
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827132631.18627-1-chris@chris-wilson.co.uk
If we create a new live_context() we should have a mapping for each
engine. Document that assumption with an assertion.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827094933.13778-1-chris@chris-wilson.co.uk
The intention is that we first try to pin the current vma into the
mappable aperture only if it is already in use or it fits in the free
space and will not cause contention. The first attempt was meant to be
using PIN_NOEVICT to reuse the current vma if possible, following up
with different eviction strategies.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111485
Fixes: 6846895fde ("drm/i915: Replace PIN_NONFAULT with calls to PIN_NOEVICT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826130750.17272-1-chris@chris-wilson.co.uk
To properly handle asynchronous migration of batch objects, we need to
couple the fences on the incoming batch into the request and should not
assume that they always start idle.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826072149.9447-1-chris@chris-wilson.co.uk
Currently, we don't call dma_set_max_seg_size() for i915 because we
intentionally do not limit the segment length that the device supports.
However, this results in a warning being emitted if we try to map
anything larger than SZ_64K on a kernel with CONFIG_DMA_API_DEBUG_SG
enabled:
[ 7.751926] DMA-API: i915 0000:00:02.0: mapping sg segment longer
than device claims to support [len=98304] [max=65536]
[ 7.751934] WARNING: CPU: 5 PID: 474 at kernel/dma/debug.c:1220
debug_dma_map_sg+0x20f/0x340
This was originally brought up on
https://bugs.freedesktop.org/show_bug.cgi?id=108517 , and the consensus
there was it wasn't really useful to set a limit (and that dma-debug
isn't really all that useful for i915 in the first place). Unfortunately
though, CONFIG_DMA_API_DEBUG_SG is enabled in the debug configs for
various distro kernels. Since a WARN_ON() will disable automatic problem
reporting (and cause any CI with said option enabled to start
complaining), we really should just fix the problem.
Note that as me and Chris Wilson discussed, the other solution for this
would be to make DMA-API not make such assumptions when a driver hasn't
explicitly set a maximum segment size. But, taking a look at the commit
which originally introduced this behavior, commit 78c47830a5
("dma-debug: check scatterlist segments"), there is an explicit mention
of this assumption and how it applies to devices with no segment size:
Conversely, devices which are less limited than the rather
conservative defaults, or indeed have no limitations at all
(e.g. GPUs with their own internal MMU), should be encouraged to
set appropriate dma_parms, as they may get more efficient DMA
mapping performance out of it.
So unless there's any concerns (I'm open to discussion!), let's just
follow suite and call dma_set_max_seg_size() with UINT_MAX as our limit
to silence any warnings.
Changes since v3:
* Drop patch for enabling CONFIG_DMA_API_DEBUG_SG in CI. It looks like
just turning it on causes the kernel to spit out bogus WARN_ONs()
during some igt tests which would otherwise require teaching igt to
disable the various DMA-API debugging options causing this. This is
too much work to be worth it, since DMA-API debugging is useless for
us. So, we'll just settle with this single patch to squelch WARN_ONs()
during driver load for users that have CONFIG_DMA_API_DEBUG_SG turned
on for some reason.
* Move dma_set_max_seg_size() call into i915_driver_hw_probe() - Chris
Wilson
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patchwork.freedesktop.org/patch/msgid/20190823205251.14298-1-lyude@redhat.com
vgpu ppgtt notification was split into 2 steps, the first step is to
update PVINFO's pdp register and then write PVINFO's g2v_notify register
with action code to tirgger ppgtt notification to GVT side.
currently these steps were not atomic operations due to no any protection,
so it is easy to enter race condition state during the MTBF, stress and
IGT test to cause GPU hang.
the solution is to add a lock to make vgpu ppgtt notication as atomic
operation.
Cc: stable@vger.kernel.org
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1566543451-13955-1-git-send-email-xiaolin.zhang@intel.com
Avoid having to pass around (ctx, engine) everywhere by passing the
actual intel_context we intend to use. Today we preach this lesson to
igt_gpu_fill_dw and its callers' callers.
The immediate benefit for the GEM selftests is that we aim to use the
GEM context as the control, the source of the engines on which to test
the GEM context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823235141.31799-1-chris@chris-wilson.co.uk
Our fence management is lazy, very lazy. If the user marks an object as
untiled, we do not immediately flush the fence but merely mark it as
dirty. On the next use we have to remember to check and remove the fence,
by which time we hope it is idle and we do not have to wait.
v2: Throw away the old fence on the next ggtt_pin.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111468
Fixes: 1f7fd484ff ("drm/i915: Replace i915_vma_put_fence()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823153944.20630-1-chris@chris-wilson.co.uk
In order for the Braswell top-level PD to remain the same from the time
of request construction to its submission onto HW, as we may be
asynchronously rewriting the page tables (thus changing the expected
register state after having already stored the old addresses in the
request), the top level PD must be preallocated.
So wave goodbye to our lazy allocation of those 4x2 pages.
v2: A little bit of write-flushing required (presumably it always has
been required, but now we are more susceptible and it is showing up!)
v3: Put back the forced-PD-reload on every batch, we can't survive
without it and explicitly marking the context for PD reload makes
Braswell turn nasty.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823141421.2398-1-chris@chris-wilson.co.uk
Sadly lockdep records when the irqs are re-enabled and then marks up the
fake lock as being irq-unsafe. Our hand is forced and so we must mark up
the entire fake lock critical section as irq-off.
Hopefully this is the last tweak required!
v2: Not quite, we need to mark the timeline spinlock as irqsafe. That
was a genuine bug being hidden by the earlier lockdep splat.
Fixes: d67739268c ("drm/i915/gt: Mark up the nested engine-pm timeline lock as irqsafe")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823132700.25286-2-chris@chris-wilson.co.uk
Use hweight8() instead of hweight32() for 8bit masks. Doesn't actually
matter for us since the arch code will go for hweight32() anyway, but
maybe we stil want to do this for documentation purposes?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821173033.24123-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We may need to eliminate the crtc->index == pipe assumptions from
the code to support arbitrary pipes being fused off. Start that by
switching some bitmasks over to using pipe instead of the crtc index.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821173033.24123-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently, the subslice_mask runtime parameter is stored as an
array of subslices per slice. Expand the subslice mask array to
better match what is presented to userspace through the
I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is
then calculated:
slice * subslice stride + subslice index / 8
v2: Fix 32-bit build
v3: Use new helper function in SSEU workaround warning message
v4: Use GEM_BUG_ON to force developers to use valid SSEU configurations
per platform (Chris)
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-12-stuart.summers@intel.com
Add a new function to copy subslices for a specified slice
between intel_sseu structures for the purpose of determining
power-gate status. Note that currently ss_stride has a max
of 1.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-11-stuart.summers@intel.com
Add a subslice stride calculation when setting subslices. This
aligns more closely with the userspace expectation of the subslice
mask structure.
v2: Use local variable for subslice_mask on HSW and
clean up a few other subslice_mask local variable
changes
v3: Add GEM_BUG_ON for ss_stride to prevent array overflow (Chris)
Split main set function and refactors in intel_device_info.c
into separate patches (Chris)
v4: Reduce ss_stride size check when setting subslices per slice
based on actual expected max stride (Chris)
Move that GEM_BUG_ON check for the ss_stride out to the patch
which adds the ss_stride
v5: Use memcpy instead of looping through each stride index
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-8-stuart.summers@intel.com
When setting up subslice_mask, instead of operating on the slice
array directly, use a local variable to start bits per slice, then
use this to set the per slice array in one step.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-6-stuart.summers@intel.com
Add a new SSEU runtime parameter, eu_stride, which is
used to mirror the userspace concept of a range of EUs
per subslice.
This patch simply adds the parameter and updates usage
in the QUERY_TOPOLOGY_INFO handler.
v2: Add GEM_BUG_ON to make sure eu_stride is valid
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-5-stuart.summers@intel.com
Add a new parameter, ss_stride, to the runtime info
structure. This is used to mirror the userspace concept
of subslice stride, which is a range of subslices per slice.
This patch simply adds the definition and updates usage
in the QUERY_TOPOLOGY_INFO handler.
v2: Add GEM_BUG_ON to make sure ss_stride is valid
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-4-stuart.summers@intel.com
Add a new function to allow each platform to set maximum
slice, subslice, and EU information to reduce code duplication.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-3-stuart.summers@intel.com
Use a local variable to find SSEU runtime information
in various debugfs functions.
v2: Remove extra line breaks per feedback from Chris
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-2-stuart.summers@intel.com
HCP/MFX power gating is disabled by default, turn it on for the vd units
available. User space will also issue a MI_FORCE_WAKEUP properly to
wake up proper subwell.
During driver load, init_clock_gating happens after device_info_init_mmio
read the vdbox disable fuse register, so only present vd units will have
these enabled.
BSpec: 14214
HSDES: 1209977827
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tony Ye <tony.ye@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-3-lucas.demarchi@intel.com
GAM registers located in the 0x4xxx range have been relocated to 0xCxxx;
this is to make space for global MOCS registers.
v2: Rename register and bitfield to its new name (suggested by Mika)
HSD: 399379
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-2-lucas.demarchi@intel.com
This patch fixes the intel_configure_pps_for_dsc_encoder() function to use
cpu_transcoder instead of encoder->type to select the correct DSC registers
that was wrongly used in the original patch for one DSC register isntance.
Fixes: 7182414e25 ("drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling")
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821215950.24223-1-manasi.d.navare@intel.com
DSC engine on ICL supports only 8 and 10 BPC as the input
BPC. But DSC engine in TGL supports 8, 10 and 12 BPC.
Add 12 BPC support for DSC while calculating compression
configuration.
v2: Remove the separate define TGL_DP_DSC_MAX_SUPPORTED_BPC
and use the value directly.(More such defines can be removed
as part of future patches). (Ville)
v3: Use values directly instead of accessing the defines
everytime for min and max DSC BPC.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820223059.18052-1-anusha.srivatsa@intel.com
No need to unmask PSR interrutpion if PSR is not enabled, better move
the call to intel_psr_enable_source().
v2: Renamed intel_psr_irq_control() to psr_irq_control() (Lucas)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820223325.27490-3-jose.souza@intel.com
According to PSR2_CTL definition in BSpec there is only one instance
of PSR2_CTL. Platforms gen < 12 with EDP transcoder only support PSR2
on TRANSCODER_EDP while on TGL PSR2 is only supported by
TRANSCODER_A.
Since BDW PSR is allowed on any port, but we need to restrict by
transcoder.
v8: Renamed _psr2_supported_in_trans() to psr2_supported() (Lucas)
v9: Renamed psr2_supported() to transcoder_has_psr2() (Ville)
BSpec: 7713
BSpec: 20584
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820223325.27490-2-jose.souza@intel.com
PSR registers are a mess, some have the full address while others just
have the additional offset from psr_mmio_base.
For BDW+ psr_mmio_base is nothing more than TRANSCODER_EDP_OFFSET +
0x800 and using it makes more difficult for people with an PSR
register address or PSR register name from from BSpec as i915 also
don't match the BSpec names.
For HSW psr_mmio_base is _DDI_BUF_CTL_A + 0x800 and PSR registers are
only available in DDIA.
Other reason to make relative to transcoder is that since BDW every
transcoder have PSR registers, so in theory it should be possible to
have PSR enabled in a non-eDP transcoder.
So for BDW+ we can use _TRANS2() to get the register offset of any
PSR register in any transcoder while for HSW we have _HSW_PSR_ADJ
that will calculate the register offset for the single PSR instance,
noting that we are already guarded about trying to enable PSR in other
port than DDIA on HSW by the 'if (dig_port->base.port != PORT_A)' in
intel_psr_compute_config(), this check should only be valid for HSW
and will be changed in future.
PSR2 registers and PSR_EVENT was added after Haswell so that is why
_PSR_ADJ() is not used in some macros.
The only registers that can not be relative to transcoder are
PSR_IMR and PSR_IIR that are not relative to anything, so keeping it
hardcoded. That changed for TGL but it will be handled in another
patch.
Also removing BDW_EDP_PSR_BASE from GVT because it is not used as it
is the only PSR register that GVT have.
v5:
- Macros changed to be more explicit about HSW (Dhinakaran)
- Squashed with the patch that added the tran parameter to the
macros (Dhinakaran)
v6:
- Checking for interruption errors after module reload in the
transcoder that will be used (Dhinakaran)
- Using lowercase to the registers offsets
v7:
- Removing IS_HASWELL() from registers macros(Jani)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820223325.27490-1-jose.souza@intel.com
You have to cut it off at the neck, otherwise it just reappears in the
next merge, like it did in commit 3f866026f0ce ("Merge drm/drm-next
into drm-intel-next-queued")
References: 3f866026f0ce ("Merge drm/drm-next into drm-intel-next-queued")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822065917.18988-1-chris@chris-wilson.co.uk
Avoid calling i915_vma_put_fence() by using our alternate paths that
bind a secondary vma avoiding the original fenced vma. For the few
instances where we need to release the fence (i.e. on binding when the
GGTT range becomes invalid), replace the put_fence with a revoke_fence.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822061557.18402-1-chris@chris-wilson.co.uk
Since we want to revoke the ggtt vma from only under the ggtt->mutex, we
need to move protection of the userfault tracking from the struct_mutex
to the ggtt->mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822060914.2671-2-chris@chris-wilson.co.uk
We can reduce the locking for fence registers from the dev->struct_mutex
to a local mutex. We could introduce a mutex for the sole purpose of
tracking the fence acquisition, except there is a little bit of overlap
with the fault tracking, so use the i915_ggtt.mutex as it covers both.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822060914.2671-1-chris@chris-wilson.co.uk
We need the rename of reservation_object to dma_resv.
The solution on this merge came from linux-next:
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 14 Aug 2019 12:48:39 +1000
Subject: [PATCH] drm: fix up fallout from "dma-buf: rename reservation_object to dma_resv"
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
drivers/gpu/drm/i915/gt/intel_engine_pool.c | 8 ++++----
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/gt/intel_engine_pool.c b/drivers/gpu/drm/i915/gt/intel_engine_pool.c
index 03d90b49584a..4cd54c569911 100644
--- a/drivers/gpu/drm/i915/gt/intel_engine_pool.c
+++ b/drivers/gpu/drm/i915/gt/intel_engine_pool.c
@@ -43,12 +43,12 @@ static int pool_active(struct i915_active *ref)
{
struct intel_engine_pool_node *node =
container_of(ref, typeof(*node), active);
- struct reservation_object *resv = node->obj->base.resv;
+ struct dma_resv *resv = node->obj->base.resv;
int err;
- if (reservation_object_trylock(resv)) {
- reservation_object_add_excl_fence(resv, NULL);
- reservation_object_unlock(resv);
+ if (dma_resv_trylock(resv)) {
+ dma_resv_add_excl_fence(resv, NULL);
+ dma_resv_unlock(resv);
}
err = i915_gem_object_pin_pages(node->obj);
which is a simplified version from a previous one which had:
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Most importantly per-process address spaces on GPUs that are capable of
providing proper isolation has finished baking. This is the base for
our softpin implementation, which allows us to support the texture
descriptor buffers used by GC7000 series GPUs without a major UAPI
extension/rework.
Shortlog of notable changes:
- code cleanup from Fabio
- fix performance counters on GC880 and GC2000 GPUs from Christian
- drmP.h header removal from Sam
- per process address space support on MMUv2 GPUs from me
- softpin support from me
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1565946875.2641.73.camel@pengutronix.de
In commit 70d6894d14 ("drm/i915: Serialize against vma moves")
I managed to miss a couple of i915_vma_move_to_active() that had not
serialised against an async vma pinning. Add the missing
i915_request_await.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821193851.18232-1-chris@chris-wilson.co.uk
We're not allowed to create new properties after device registration
so for MST connectors we need to either create the max_bpc property
earlier, or we reuse one we already have. Let's do the latter apporach
since the corresponding SST connector already has the prop and its
min/max are correct also for the MST connector.
The problem was highlighted by commit 4f5368b554 ("drm/kms:
Catch mode_object lifetime errors") which results in the following
spew:
[ 1330.878941] WARNING: CPU: 2 PID: 1554 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xa0/0xb0 [drm]
...
[ 1330.879008] Call Trace:
[ 1330.879023] drm_property_create+0xba/0x180 [drm]
[ 1330.879036] drm_property_create_range+0x15/0x30 [drm]
[ 1330.879048] drm_connector_attach_max_bpc_property+0x62/0x80 [drm]
[ 1330.879086] intel_dp_add_mst_connector+0x11f/0x140 [i915]
[ 1330.879094] drm_dp_add_port.isra.20+0x20b/0x440 [drm_kms_helper]
...
Cc: stable@vger.kernel.org
Cc: Lyude Paul <lyude@redhat.com>
Cc: sunpeng.li@amd.com
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Fixes: 5ca0ef8a56 ("drm/i915: Add max_bpc property for DP MST")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820161657.9658-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Since we now run process_csb() outside of the engine->active.lock, we
can process a CS-event immediately upon our ELSP write. As we currently
inspect the pending queue *after* the ELSP write, there is an
opportunity for a CS-event to update the pending queue before we can
read it, making ourselves chases an invalid pointer.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111427
Fixes: df40306902 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821142336.21609-1-chris@chris-wilson.co.uk
When under severe stress for GTT mappable space, the LRU eviction model
falls off a cliff. We spend all our time scanning the much larger
non-mappable area searching for something within the mappable zone we can
evict. Turn this on its head by only using the full vma for the object if
it is already pinned in the mappable zone or there is sufficient *free*
space to accommodate it (prioritizing speedy reuse). If there is not,
immediately fall back to using small chunks (tilerow for GTT mmap, single
pages for pwrite/relocation) and using random eviction before doing a full
search.
Testcase: igt/gem_concurrent_blt
References: https://bugs.freedesktop.org/show_bug.cgi?id=110848
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821123234.19194-1-chris@chris-wilson.co.uk
When inserting the final level PTE, we check that we are not overflowing
the page table (checking that pt_used does not exceed the size of the
table). However, we have to allow for every other PTE to be pinned by a
simultaneous removal thread (as on remove we bump the pt_used counter
before adjusting the table).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821042044.7354-1-chris@chris-wilson.co.uk
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- dma-buf: add reservation_object_fences helper, relax
reservation_object_add_shared_fence, remove
reservation_object seq number (and then
restored)
- dma-fence: Shrinkage of the dma_fence structure,
Merge dma_fence_signal and dma_fence_signal_locked,
Store the timestamp in struct dma_fence in a union with
cb_list
Driver Changes:
- More dt-bindings YAML conversions
- More removal of drmP.h includes
- dw-hdmi: Support get_eld and various i2s improvements
- gm12u320: Few fixes
- meson: Global cleanup
- panfrost: Few refactors, Support for GPU heap allocations
- sun4i: Support for DDC enable GPIO
- New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02,
Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1
Toppoly TD043MTEA1
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXVqvpwAKCRDj7w1vZxhR
xa3RAQDzAnt5zeesAxX4XhRJzHoCEwj2PJj9Re6xMJ9PlcfcvwD+OS+bcB6jfiXV
Ug9IBd/DqjlmD9G9MxFxfSV946rksAw=
=8uv4
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-08-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.4:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- dma-buf: add reservation_object_fences helper, relax
reservation_object_add_shared_fence, remove
reservation_object seq number (and then
restored)
- dma-fence: Shrinkage of the dma_fence structure,
Merge dma_fence_signal and dma_fence_signal_locked,
Store the timestamp in struct dma_fence in a union with
cb_list
Driver Changes:
- More dt-bindings YAML conversions
- More removal of drmP.h includes
- dw-hdmi: Support get_eld and various i2s improvements
- gm12u320: Few fixes
- meson: Global cleanup
- panfrost: Few refactors, Support for GPU heap allocations
- sun4i: Support for DDC enable GPIO
- New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02,
Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1
Toppoly TD043MTEA1
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fixup dma_resv rename fallout]
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819141923.7l2adietcr2pioct@flea
Each fake MST encoder is tied to a specific pipe. Fix the encoder's
crtc_mask to reflect that fact.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-16-lucas.demarchi@intel.com
2 important fixes:
- vblank counter is now working
- PSR1 is working
Cc: Jose Souza <jose.souza@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-5-lucas.demarchi@intel.com
When trying to read registers from transcoder C and D while PG3 is ON it
causes unclaimed access warnings. Adding the powerwells for the pipes
fixes the issue, but doesn't match the spec.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-4-lucas.demarchi@intel.com
There are no changes with respect to GEN11, which Paulo wrote.
This gets rid of the "Missing switch case in read_timestamp_frequency"
message at boot for Tiger Lake.
[ Lucas: BSpec: 10742 and 9024, but there's a mismatch on the values.
Let's say a glitch in the spec. Tested locally and it works. ]
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-3-lucas.demarchi@intel.com
The current SKUs added for Tiger Lake don't have DDIC hooked up, even
though it is supported by the SoC. The current state for these SKUs is
problematic since while enabling the combo phy, PORT_COMP_DW* return
0xFFFFFFFF, which is invalid per register definition.
During initialization we check what phys are not yet enabled by reading
PHY_MISC_C and try to enable it by toggling the "DE to IO Comp Pwr Down"
bit. But after that any read to the PORT_COMP_DW* returns invalid
results. This removes the following warning
[56997.634353] Missing case (val == 4294967295)
[56997.639241] WARNING: CPU: 5 PID: 768 at drivers/gpu/drm/i915/display/intel_combo_phy.c:54 cnl_get_procmon_ref_values+0xc9/0xf0 [i915]
[56997.639808] Modules linked in: i915(+) prime_numbers x86_pkg_temp_thermal coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e [last unloaded: prime_numbers]
[56997.639808] CPU: 5 PID: 768 Comm: insmod Tainted: G U W 5.2.0-demarchi+ #65
[56997.639808] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.2252.A03.1906270154 06/27/2019
[56997.639808] RIP: 0010:cnl_get_procmon_ref_values+0xc9/0xf0 [i915]
[56997.639808] Code: 2c a0 85 c9 74 e0 81 f9 00 00 00 01 75 09 48 c7 c0 0c a4 2c a0 eb cf 48 c7 c6 3c 3a 31 a0 48 c7 c7 40 3a 31 a0 e8 6b 4d ea e0 <0f> 0b 48 c7 c0 00 a4 2c a0 eb b1 48 c7 c0 24 a4 2
c a0 eb a8 e8 be
[56997.639808] RSP: 0018:ffffc9000068f8a8 EFLAGS: 00010286
[56997.639808] RAX: 0000000000000000 RBX: ffff88848fa90000 RCX: 0000000000000000
[56997.639808] RDX: ffff8884a08b5ef8 RSI: ffff8884a08a6658 RDI: 00000000ffffffff
[56997.639808] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
[56997.639808] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88848fa90000
[56997.639808] R13: 0000000000000000 R14: 0000000000000002 R15: 0006c00000162000
[56997.639808] FS: 00007f61ca3d12c0(0000) GS:ffff8884a0880000(0000) knlGS:0000000000000000
[56997.639808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[56997.639808] CR2: 00007f71be6a92c0 CR3: 0000000494750006 CR4: 0000000000760ee0
[56997.639808] PKRU: 55555554
[56997.639808] Call Trace:
[56997.639808] cnl_verify_procmon_ref_values+0x36/0xf0 [i915]
[56997.639808] ? rcu_read_lock_sched_held+0x6f/0x80
[56997.639808] ? gen11_fwtable_read32+0x257/0x290 [i915]
[56997.639808] icl_combo_phy_verify_state.part.0+0x22/0xa0 [i915]
[56997.639808] intel_combo_phy_init+0x17e/0x3e0 [i915]
[56997.639808] ? icl_display_core_init+0x2c/0x1a0 [i915]
[56997.639808] ? _raw_spin_unlock_irqrestore+0x4c/0x60
[56997.639808] icl_display_core_init+0x34/0x1a0 [i915]
[56997.639808] intel_power_domains_init_hw+0x200/0x570 [i915]
[56997.639808] i915_driver_probe+0x103b/0x17e0 [i915]
[56997.639808] ? printk+0x53/0x6a
[56997.639808] i915_pci_probe+0x3b/0x190 [i915]
We may or may not need to change the implementation to account for DDIC
being available on other SKUs. For now I think the best thing to do is
to just disable the port.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814235517.10032-1-lucas.demarchi@intel.com
The current assertion tries to make sure that we do not over count the
number of used PDE inside a page directory -- that is with an array of
512 pde, we do not expect more than 512 elements used! However, our
assertion has to take into account that as we pin an element into the
page directory, the caller first pins the page directory so the usage
count is one higher. However, this should be one extra pin per thread,
and the upper bound is that we may have one thread for each entry.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820141218.14714-1-chris@chris-wilson.co.uk
This is only required for a single platform so no need to reserve the
memory on all of them.
This removes the last direct dependency of i915_drv.h on i915_reg.h
(apart from the i915_reg_t definition).
v2: drop unneeded diff, keep the vlv prefix, call functions
unconditionally (Jani), fwd declaration of the struct (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820020147.5667-1-daniele.ceraolospurio@intel.com
Re-use Gen11 context size for now.
[ Lucas: this is a temporary enabling patch that needs to be confirmed:
we need to check BSpec 46255 and recompute ]
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-27-lucas.demarchi@intel.com
Gen12 removes the target-cache and age fields from the private PAT
because MOCS now have the capability to set these itself. Only memory-type
field should be programmed in the ppat, the reminded bits are reserved.
Since now there are only 4 possible combinations, we could set only 4
PPAT and leave the reminded 4 as UC, but I left them as WB as we used
to have before.
Also these registers have been relocated to the 0x4800-0x481c range.
HSDES: 1406402661
BSpec: 31654
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-33-lucas.demarchi@intel.com
Add empty workaround hooks for Tiger Lake. The workarounds will be added
on separate patches. We were already applying
WaRsForcewakeAddDelayForAck, which is indeed still valid, so also update
the comment.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-21-lucas.demarchi@intel.com
The CSB format has been reworked for Gen12 to include information on
both the context we're switching away from and the context we're
switching to. After the change, some of the events don't have their
own bit anymore and need to be inferred from other values in the csb.
One of the context IDs (0x7FF) has also been reserved to indicate
the invalid ctx, i.e. engine idle.
Note that the full context ID includes the SW counter as well, but since
we currently only care if the context is valid or not we can ignore that
part.
v2: fix mask size, fix and expand comments (Tvrtko),
use if-ladder (Chris)
Bspec: 45555, 46144
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820102201.29849-1-chris@chris-wilson.co.uk
Like Gen11, Gen12 has 11 available bits for the ctx id field. However,
the last value (0x7FF) is reserved to indicate engine idle, so we
need to reduce the maximum number of contexts by 1 compared to Gen11.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-29-lucas.demarchi@intel.com
Gen12 uses a new indirect ctx offset.
Bspec: 11740
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-28-lucas.demarchi@intel.com
In Gen11, only even numbered "logical" VDBoxes are hooked up to a SFC
(Scaler & Format Converter) unit. This is not the case in Tigerlake,
where each VDBox can access a SFC.
We will use this information to decide when the SFC units need to be reset
and also pass it to the GuC.
Bspec: 48077
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731004902.34672-5-daniele.ceraolospurio@intel.com
Currently, we remove the from per-file request list for throttling and
retirement under a dedicated spinlock, but insertion is governed by
struct_mutex. This needs to be the same lock so that the
retirement/insertion of neighbouring requests (at the tail) doesn't
break the list.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820080907.4665-1-chris@chris-wilson.co.uk
To work around a DMC/Punit issue on ICL where the driver's
ICL_PORT_COMP_DW8/IREFGEN PHY setting is lost when entering/exiting DC6
state, make sure to reinit the PHY whenever disabling DC states.
Similarly the driver's PHY/DBUF/CDCLK settings should have been preserved
across DC5/6 transitions, so check this on all platforms.
This gets rid of the following WARN during suspend:
Combo PHY A HW state changed unexpectedly
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816095523.15800-1-imre.deak@intel.com
The conversion during HDMI HW readout from port_clock to crtc_clock was
missed when HDMI 10bpc support was added, so fix that.
v2:
- Unscrew the non-HDMI case.
Fixes: cd9e11a8bf ("drm/i915/icl: Add 10-bit support for hdmi")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109593
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808162547.7009-1-imre.deak@intel.com
Inside gtt_restore_mappings() we currently take the obj->resv->lock, but
in the future we need to avoid taking this fs-reclaim tainted lock as we
need to extend the coverage of the vm->mutex. Take advantage of the
single-threaded nature of the early resume phase, and do a single
wbinvd() to flush all the GTT objects en masse.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819200705.3631-1-chris@chris-wilson.co.uk
Our pin mapping tables for ICP and MCC currently only list the standard
GPIO pins used for various output ports. Even through ICP's standard
pin usage only utilizes pins 1, 2, and 9-12, and MCC's standard pin
usage only uses pins 1, 2, and 9, these platforms do still have GPIO
registers to address pins in the range 1-3 and 9-14. OEM's may remap
GPIO usage in non-standard ways (and provide the actual mapping via VBT
settings), so we shouldn't exclude pins on these platforms just because
they aren't part of the standard mappings.
TGP's standard pin tables contains all the possible pins, so let's
rename them to "icp" and use them for all PCH >= PCH_ICP. This will
prevent intel_gmbus_is_valid_pin from rejecting non-standard pin usage
that an OEM specifies via the VBT.
Note that this will cause pin 9 to be labeled as "tc1" instead of "dpc"
in debug messages on platforms with the MCC PCH, but that may actually
help avoid confusion since the text strings will now be the same on all
gen11+ platforms instead of being different on just EHL.
v2: Drop now-unused MCC_DDC_BUS_DDI_* names.
v3: We want to compare against INTEL_PCH_TYPE, not INTEL_PCH_ID.
Bspec: 8417
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817005041.20651-1-matthew.d.roper@intel.com
Make sure that when submitting requests, we always serialize against
potential vma moves and clflushes.
Time for a i915_request_await_vma() interface!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819112033.30638-1-chris@chris-wilson.co.uk
We use a fake timeline->mutex lock to reassure lockdep that the timeline
is always locked when emitting requests. However, the use inside
__engine_park() may be inside hardirq and so lockdep now complains about
the mixed irq-state of the nested locked. Disable irqs around the
lockdep tracking to keep it happy.
Fixes: 6c69a45445 ("drm/i915/gt: Mark context->active_count as protected by timeline->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819075835.20065-3-chris@chris-wilson.co.uk
Static structure fb_funcs, of type drm_framebuffer_funcs, is used only
when it is passed to drm_gem_fb_create_with_funcs() as its last
argument. drm_gem_fb_create_with_funcs does not modify its lst argument
(fb_funcs) and hence fb_funcs is never modified. Therefore make fb_funcs
constant to protect it from further modification.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813062712.24993-1-nishkadg.linux@gmail.com
Errors spread like wildfire, and must eventually be returned to the
user. They need to be captured and passed along the flow of fences,
infecting each in turn with the existing error, until finally they fall
out of a user visible result.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817232511.11391-1-chris@chris-wilson.co.uk
There is no need to mark whole GPU as wedged just because
of the custom HuC fw failure as users can always verify
actual HuC firmware status using existing HUC_STATUS ioctl.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190818095204.31568-4-michal.wajdeczko@intel.com
If we failed to fetch default GuC firmware and we didn't plan
to use it for the submission and we never have used GuC before
then we may continue normal driver load, no need to declare
GPU wedged (we can use execlist for submission) and it is safe
to run without the HuC (users will check HuC status anyway).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190818095204.31568-3-michal.wajdeczko@intel.com
As we plan to continue driver load after GuC initialization
failure, we can't assume that GuC log data will be available
just because GuC was initially enabled. We must check that
GuC is still running instead.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190818095204.31568-2-michal.wajdeczko@intel.com
The static structure vbox_fb_helper_funcs, of type drm_fb_helper_funcs,
is used only when it is passed as the third argument to
drm_fb_helper_fbdev_setup(), which does not modify it. Hence make it
constant to protect it from unintended modifications.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813062548.24770-1-nishkadg.linux@gmail.com
The timestamp and the cb_list are mutually exclusive, the cb_list can
only be added to prior to being signaled (and once signaled we drain),
while the timestamp is only valid upon being signaled. Both the
timestamp and the cb_list are only valid while the fence is alive, and
as soon as no references are held can be replaced by the rcu_head.
By reusing the union for the timestamp, we squeeze the base dma_fence
struct to 64 bytes on x86-64.
v2: Sort the union chronologically
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>.
Link: https://patchwork.freedesktop.org/patch/msgid/20190817153022.5749-1-chris@chris-wilson.co.uk
Variable val is initialized to a value in a for-loop that is
never read and hence it is redundant. Remove it.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817122124.29650-1-colin.king@canonical.com
Let's wait with decision about importance of uC failure to
hardware initialization step.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817131144.26884-4-michal.wajdeczko@intel.com
Be consistent and always perform fw fetch cleanup in GuC/HuC specific
init functions on every failure. Also while converting firmware
status to error, stop treating SELECTED as non-error, as long term
we should not see it.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817131144.26884-3-michal.wajdeczko@intel.com
We can rely on firmware status AVAILABLE to determine if any
firmware cleanup is required. Also don't unconditionally reset
fw status to SELECTED as we will loose MISSING/ERROR codes.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817131144.26884-2-michal.wajdeczko@intel.com
Add a redzone to our context image and check the HW does not write into
after a context save, to verify that we have the correct context size.
(This does vary with feature bits, so test with a live setup that should
match how we run userspace.)
v2: Check the redzone on every context unpin
v3: Use a kernel context to prevent loading garbage for ringbuffer
submission
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817073711.5897-1-chris@chris-wilson.co.uk
As we give page directory pointer (lvl 3) structure
for pte insertion, we can fold both versions into
one function by teaching it to get pdp regardless
of top level.
v2: naming and asserts (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816094754.26492-1-mika.kuoppala@linux.intel.com
We really need to have separate NOT_SUPPORTED state (for
lack of hardware support) and DISABLED state (to indicate
user decision) as we will have to take special steps even
if GuC firmware is now disabled but hardware exists and
could have been previously used.
v2: fix logic (Chris/CI)
v3: use proper check to avoid probe failure (CI)
v4: explain status transitions (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816205658.15020-1-michal.wajdeczko@intel.com
To reduce the number of explicit dev_priv->uncore calls in the display
code ahead of the introduction of dev_priv->de_uncore, this patch
introduces a wrapper for one of the main usages of it, the register
waits. When we transition to the new uncore, we can just update the
wrapper to point to the appropriate structure.
Since the vast majority of waits are on a set or clear of a bit or mask,
add set & clear flavours of the wrapper to simplify the code.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-7-daniele.ceraolospurio@intel.com
They're not related to registers, so move them to the more appropriate
intel_gmbus.h
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-4-daniele.ceraolospurio@intel.com
To remove the dependency between the GT headers and i915_reg.h, move the
definition of the engine IDs/classes to intel_engine_types.h
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-3-daniele.ceraolospurio@intel.com
It has nothing to do with registers, so move it to the more appropriate
intel_display_power.h
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-2-daniele.ceraolospurio@intel.com
If we only call process_csb() from the tasklet, though we lose the
ability to bypass ksoftirqd interrupt processing on direct submission
paths, we can push it out of the irq-off spinlock.
The penalty is that we then allow schedule_out to be called concurrently
with schedule_in requiring us to handle the usage count (baked into the
pointer itself) atomically.
As we do kick the tasklets (via local_bh_enable()) after our submission,
there is a possibility there to see if we can pull the local softirq
processing back from the ksoftirqd.
v2: Store the 'switch_priority_hint' on submission, so that we can
safely check during process_csb().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816171608.11760-1-chris@chris-wilson.co.uk
drm_panel-based drivers for the ACX565AKM, LB035Q02, LS037V7DW01,
NL8048HL11, TD028TTEC1 and TD043MTEA1 are available, remove the
omapdrm-specific drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816122228.9475-3-laurent.pinchart@ideasonboard.com
As every i915_active_request should be serialised by a dedicated lock,
i915_active consists of a tree of locks; one for each node. Markup up
the i915_active_request with what lock is supposed to be guarding it so
that we can verify that the serialised updated are indeed serialised.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816121000.8507-2-chris@chris-wilson.co.uk
We use timeline->mutex to protect modifications to
context->active_count, and the associated enable/disable callbacks.
Due to complications with engine-pm barrier there is a path where we used
a "superlock" to provide serialised protect and so could not
unconditionally assert with lockdep that it was always held. However,
we can mark the mutex as taken (noting that we may be nested underneath
ourselves) which means we can be reassured the right timeline->mutex is
always treated as held and let lockdep roam free.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816121000.8507-1-chris@chris-wilson.co.uk
All WOPCM error messages are device specific, so use
device specific error functions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816105501.31020-5-michal.wajdeczko@intel.com
If WOPCM layout is already locked in HW we shouldn't continue
with our own partitioning as it could be likely different and
we will be unable to enforce it and fail. Instead we should try
to reuse what is already programmed, maybe there will be a fit.
This should enable us to reload driver with slightly different
HuC firmware (or even without HuC) without need to reboot.
v2: reordered/rebased
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816105501.31020-4-michal.wajdeczko@intel.com
We can do WOPCM partitioning using rough estimates and limits
and perform detailed check as separate step.
v2: oops! s/max/min
v3: consolidate overflow checks (Daniele)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816105501.31020-3-michal.wajdeczko@intel.com
While we need to know WOPCM size to do this sanity check, it has more to
do with FW than with WOPCM. Let's move the check to fetch phase, it's
not like WOPCM is going to grow in the meantime.
v2: rebased
v3: use __intel_uc_fw_get_upload_size (Daniele)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jackie Li <yaodong.li@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816105501.31020-2-michal.wajdeczko@intel.com
Since nodes are cached in a free-list, and potentially marked as free
without actually being destroyed, thus allowing them to be
opportunistically re-allocated, we should apply kmemleak_update_trace
every time a node is given a new owner and marked as allocated, to aid
in debugging.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816105357.14340-2-matthew.auld@intel.com
If we are leaking nodes don't hide it. Also stop trying to be
"defensive" and instead embrace Kasan et al.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816105357.14340-1-matthew.auld@intel.com
Using name "bridge" for macro bridge_to_rcar_lvds argument doesn't
work when the pointer name used by the caller is not "bridge".
Rename the argument to "b" to allow for any pointer name.
While at it, fix the connector_to_rcar_lvds macro similarly.
Fixes: c6a27fa41f ("drm: rcar-du: Convert LVDS encoder code to bridge driver")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Fix connector_to_rcar_lvds]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
DRM bridges are only used by atomic drivers, and none of them use the
legacy helpers. Drop bridge support from those helpers to prepare for
making the bridge operations atomic-aware.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The dw-hdmi, kirin and imx drivers include the drm/drm_encoder_slave.h
header but don't use the encoder slave API. Remove it or replace it with
drm/drm_encoder.h as needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts
67c97fb79a ("dma-buf: add reservation_object_fences helper")
dd7a7d1ff2 ("drm/i915: use new reservation_object_fences helper")
0e1d8083bd ("dma-buf: further relax reservation_object_add_shared_fence")
5d344f58da ("dma-buf: nuke reservation_object seq number")
The scenario that defeats simply grabbing a set of shared/exclusive
fences and using them blissfully under RCU is that any of those fences
may be reallocated by a SLAB_TYPESAFE_BY_RCU fence slab cache. In this
scenario, while keeping the rcu_read_lock we need to establish that no
fence was changed in the dma_resv after a read (or full) memory barrier.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814182401.25009-1-chris@chris-wilson.co.uk
Move the active tracking for the frontbuffer operations out of the
i915_gem_object and into its own first class (refcounted) object. In the
process of detangling, we switch from low level request tracking to the
easier i915_active -- with the plan that this avoids any potential
atomic callbacks as the frontbuffer tracking wishes to sleep as it
flushes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816074635.26062-1-chris@chris-wilson.co.uk
Forgo the struct_mutex requirement for request retirement as we have
been transitioning over to only using the timeline->mutex for
controlling the lifetime of a request on that timeline.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815205709.24285-4-chris@chris-wilson.co.uk
In preparation for removing struct_mutex from around context retirement,
we need to make timeline pinning and unpinning safe. Since multiple
engines/contexts can share a single timeline, we cannot rely on
borrowing the context mutex (otherwise we could state that the timeline
is only pinned/unpinned inside the context pin/unpin and so guarded by
it). However, we only perform a sequence of atomic operations inside the
timeline pin/unpin and the sequence of those operations is safe for a
concurrent unpin / pin, so we can relax the struct_mutex requirement.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815205709.24285-3-chris@chris-wilson.co.uk
Since __i915_request_queue() may be called from hardirq (timer) context,
we cannot use local_bh_disable/enable at the lower level. As we do want
to kick the tasklet to speed up initial submission or preemption for
normal client submission, lift it to the normal process context
callpath.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815042031.27750-1-chris@chris-wilson.co.uk
Flush according to what gen11 expects when writing
breadcrumbs. As only the seqnowrite + flush differs
between engine and gens, enclose the footer to
helper.
v2: avoid problem of sane local naming by not using them
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815094929.358-1-mika.kuoppala@linux.intel.com
Add tile cache flushing for gen11. To relive us from the
burden of previous obsolete workarounds, make a dedicated
flush/invalidate callback for gen11.
To fortify an independent single flush, do post
sync op as there are indications that without it
we don't flush everything. This should also make this
callback more readily usable in tgl (see l3 fabric flush).
v2: whitespacing
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815083055.14132-1-mika.kuoppala@linux.intel.com
Dan reported the following static checker warning:
drivers/gpu/drm/i915/selftests/i915_buddy.c:670 igt_buddy_alloc_range()
error: we previously assumed 'block' could be null (see line 665)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815103210.11802-1-matthew.auld@intel.com
Looking around the GT initialisation, we have a few log messages we
think are interesting enough present to the user (such as the amount of L4
cache) and a few to inform them of the result of actions or conflicting
HW restrictions (i.e. quirks). These are device specific messages, so
use the dev family of printk.
v2: shave off a few bytes of .rodata!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815093604.3618-1-chris@chris-wilson.co.uk
With softpin we allow the userspace to take control over the GPU virtual
address space. The new capability is relected by a bump of the minor DRM
version. There are a few restrictions for userspace to take into
account:
1. The kernel reserves a bit of the address space to implement zero page
faulting and mapping of the kernel internal ring buffer. Userspace can
query the kernel for the first usable GPU VM address via
ETNAVIV_PARAM_SOFTPIN_START_ADDR.
2. We only allow softpin on GPUs, which implement proper process
separation via PPAS. If softpin is not available the softpin start
address will be set to ~0.
3. Softpin is all or nothing. A submit using softpin must not use any
address fixups via relocs.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Allow the mapping code to request a specific virtual address for the gem
mapping. If the virtual address is zero we fall back to the old mode of
allocating a virtual address for the mapping.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
With per-process address spaces in place, a rogue process submitting
bogus command streams can only hurt itself. There is no need to
validate the command stream before execution anymore.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
This builds on top of the MMU contexts introduced earlier. Instead of having
one context per GPU core, each GPU client receives its own context.
On MMUv1 this still means a single shared pagetable set is used by all
clients, but on MMUv2 there is now a distinct set of pagetables for each
client. As the command fetch is also translated via the MMU on MMUv2 the
kernel command ringbuffer is mapped into each of the client pagetables.
As the MMU context switch is a bit of a heavy operation, due to the needed
cache and TLB flushing, this patch implements a lazy way of switching the
MMU context. The kernel does not have its own MMU context, but reuses the
last client context for all of its operations. This has some visible impact,
as the GPU can now only be started once a client has submitted some work and
we got the client MMU context assigned. Also the MMU context has a different
lifetime than the general client context, as the GPU might still execute the
kernel command buffer in the context of a client even after the client has
completed all GPU work and has been terminated. Only when the GPU is runtime
suspended or switches to another clients MMU context is the old context
freed up.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
In preparation to having a context per process, etnaviv_gem_mapping_get
should not use the current GPU context, but needs to be told which
context to use.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Move buffer setup and starting of the FE loop in the kernel ringbuffer
into a separate function. This is a preparation to start the FE later
in the submit process.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
This reworks the MMU handling to make it possible to have multiple MMU contexts.
A context is basically one instance of GPU page tables. Currently we have one
set of page tables per GPU, which isn't all that clever, as it has the
following two consequences:
1. All GPU clients (aka processes) are sharing the same pagetables, which means
there is no isolation between clients, but only between GPU assigned memory
spaces and the rest of the system. Better than nothing, but also not great.
2. Clients operating on the same set of buffers with different etnaviv GPU
cores, e.g. a workload using both the 2D and 3D GPU, need to map the used
buffers into the pagetable sets of each used GPU.
This patch reworks all the MMU handling to introduce the abstraction of the
MMU context. A context can be shared across different GPU cores, as long as
they have compatible MMU implementations, which is the case for all systems
with Vivante GPUs seen in the wild.
As MMUv1 is not able to change pagetables on the fly, without a
"stop the world" operation, which stops GPU, changes pagetables via CPU
interaction, restarts GPU, the implementation introduces a shared context on
MMUv1, which is returned whenever there is a request for a new context.
This patch assigns a MMU context to each GPU, so on MMUv2 systems there is
still one set of pagetables per GPU, but due to the shared context MMUv1
systems see a change in behavior as now a single pagetable set is used
across all GPU cores.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
If a MMU is shared between multiple GPUs, all of them need to flush their
TLBs, so a single marker that gets reset on the first flush won't do.
Replace the flush marker with a sequence number, so that it's possible to
check if the TLB is in sync with the current page table state for each GPU.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
There is no need for each GPU to have it's own cmdbuf suballocation
region. Only allocate a single one for the the etnaviv virtual device
and share it across all GPUs.
As the suballoc space is now potentially shared by more hardware jobs
running in parallel, double its size to 512KB to avoid contention.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
This allows to decouple the cmdbuf suballocator create and mapping
the region into the GPU address space. Allowing multiple AS to share
a single cmdbuf suballoc.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Remember if the GPU has been sucessfully initialized. Only in that case
do we need to clean up various structures in the unbind path. If the
GPU hasn't been sucessfully initialized all the cleanups should happen
in the failure paths of the init function.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
This function does only need the mmu part part of the gpu struct.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Due to the tracking provided by the scheduler we know exactly which
submit is failing. Only dump this single submit and the required
auxiliary information. This cuts down the size of the devcoredumps
by only including relevant information.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
TTM provides a means to assign eviction priorities to buffer object. This
means that all buffer objects with a lower priority will be evicted first
on memory pressure.
Use this to make sure surfaces and in particular non-dirty surfaces are
evicted first. Evicting in particular shaders, cotables and contexts imply
a significant performance hit on vmwgfx, so make sure these resources are
evicted last.
Some buffer objects are sub-allocated in user-space which means we can have
many resources attached to a single buffer object or resource. In that case
the buffer object is given the highest priority of the attached resources.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Drop use of the deprecated drmP.h file from the
remaining files.
In several cases the drmP.h include could be removed without
furter fixes. Other files required a few header files to be added.
In all files divided includes files in blocks and sort them.
v2:
- fix warning in i386 build wiht HIGHMEM disabled
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: kbuild test robot <lkp@intel.com> [warning in i386 build]
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
To facilitate removal of drmP.h in the .c
files remove the use from header files first.
Fix fallout in the other files.
Sorted include files in blocks and sorted files
within each block in alphabetical order.
This revealed a dependency from an uapi header to a header
located below drivers/gpu/drm/vmwgfx/.
Added FIXME to remind someone to fix this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
At one point, the GPU command verifier and user-space handle manager
couldn't properly protect GPU clients from accessing each other's data.
Instead there was an elaborate mechanism to make sure only the active
master's primary clients could render. The other clients were either
put to sleep or even killed (if the master had exited). VRAM was
evicted on master switch. With the advent of render-node functionality,
we relaxed the VRAM eviction, but the other mechanisms stayed in place.
Now that the GPU command verifier and ttm object manager properly
isolates primary clients from different master realms we can remove the
master switch related code and drop those legacy features.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
This panel is used on the OMAP3 Pandora.
The code is based on the omapdrm-specific panel-tpo-td043mtea1 driver.
v2:
- fix checkpatch warnings
o (lcd == NULL) => (!lcd) (sam)
o alignment to open '(' (sam)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-10-laurent.pinchart@ideasonboard.com
This panel is used on the OpenMoko Neo FreeRunner and Neo 1973.
The code is based on the omapdrm-specific panel-tpo-td028ttec1 driver.
v2:
- fix checkpatch warnings:
o (lcd == NULL) => (!lcd) (sam)
o (1 << X) => BIT(X) (sam)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-9-laurent.pinchart@ideasonboard.com
This panel is used on the Nokia N900.
The code is based on the omapdrm-specific panel-sony-acx565akm driver.
The hardware-related logic has been changed as little as possible to
avoid regressions as hardware availability is lacking to test the
changes. Follow-up patches should address the items listed in the TODO
list.
v2:
- fix checkpatch warning (lcd == NULL) => (!lcd) (sam)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-8-laurent.pinchart@ideasonboard.com
This panel is used on the TI SDP3430 board.
The code is based on the omapdrm-specific panel-sharp-ls037v7dw01
driver.
v2:
- fix checkpatch warning (lcd == NULL) => (!lcd) (sam)
- drop __exit_p() from remove. It caused a build warning.
And no other panel drivers needs this (sam)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-7-laurent.pinchart@ideasonboard.com
This panel is used on the Zoom2/3/3630 SDP boards.
The code is based on the omapdrm-specific panel-nec-nl8048hl11 driver
v2:
- fix checkpatch warning (lcd == NULL) => (!lcd) (sam)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-6-laurent.pinchart@ideasonboard.com
The static structure aspeed_gfx_funcs, of type
drm_simple_display_pipe_funcs, is used only as an argument to
drm_simple_display_pipe_init(), which does not modify it. Hence make it
constant to protect it from unintended modification.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813063355.25549-1-nishkadg.linux@gmail.com
Drop use of the deprecated drmP.h header file.
While touching the list of include files divide them
into blocks and sort within each block.
Fix fallout.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: malidp@foss.arm.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190804094132.29463-5-sam@ravnborg.org
Drop use of the deprecated drmP.h header file.
While touching the list of include files group them and sort them.
Fix fallout from the header file removal.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804094132.29463-4-sam@ravnborg.org
Drop use of the deprecated drmP.h header file.
For all touched files divide include files into blocks,
and sort them within the blocks.
Fix fallout.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190804094132.29463-3-sam@ravnborg.org
Drop use of the deprecated drmP.h header file.
Fix fallout.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804094132.29463-2-sam@ravnborg.org
If the VGA connector has no DDC channel, an error pointer will be
dereferenced, e.g. on Salvator-XS:
Unable to handle kernel NULL pointer dereference at virtual address 000000000000017d
...
Call trace:
sysfs_do_create_link_sd.isra.0+0x40/0x108
sysfs_create_link+0x20/0x40
drm_sysfs_connector_add+0xa8/0xc8
drm_connector_register.part.3+0x54/0xb0
drm_connector_register_all+0xb0/0xd0
drm_modeset_register_all+0x54/0x88
drm_dev_register+0x18c/0x1d8
rcar_du_probe+0xe4/0x150
...
This happens because vga->ddc either contains a valid DDC channel
pointer, or -ENODEV, and drm_connector_init_with_ddc() expects a valid
DDC channel pointer, or NULL.
Fix this by resetting vga->ddc to NULL in case of -ENODEV, and replacing
the existing error checks by non-NULL checks.
This is similar to what the HDMI connector driver does.
Fixes: a4f9087e85 ("drm/bridge: dumb-vga-dac: Provide ddc symlink in connector sysfs directory")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813093046.4976-1-geert+renesas@glider.be
