Commit 60c6a14b48 ("drm/i915/display: Force the state compute phase
once to enable PSR") was forcing the state compute too earlier
causing errors because not everything was initialized, so here
moving to the end of i915_driver_modeset_probe() when the display is
all initialized.
Also fixing the place where it disarm the force probe as during the
atomic check phase errors could happen like the ones due locking and
it would cause PSR to never be enabled if that happens.
Leaving the disarm to the atomic commit phase, intel_psr_enable() or
intel_psr_update() will be called even if the current state do not
allow PSR to be enabled.
v2: Check if intel_dp is null in intel_psr_force_mode_changed_set()
v3: Check intel_dp before get dev_priv
v4:
- renamed intel_psr_force_mode_changed_set() to
intel_psr_set_force_mode_changed()
- removed the set parameter from intel_psr_set_force_mode_changed()
- not calling intel_psr_set_force_mode_changed() from
intel_psr_enable/update(), directly setting it after the same checks
that intel_psr_set_force_mode_changed() does
- moved intel_psr_set_force_mode_changed() arm call to
i915_driver_modeset_probe() as it is a better for a PSR call, all the
functions calls happening between the old and the new function call
will cause issue
Fixes: 60c6a14b48 ("drm/i915/display: Force the state compute phase once to enable PSR")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1151
Tested-by: Ross Zwisler <zwisler@google.com>
Reported-by: Ross Zwisler <zwisler@google.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221212635.11614-1-jose.souza@intel.com
To be able to differentiate the before and after of our commitment to
GuC submission, which will be used in follow-up patches to early set-up
the submission structures.
v2: move functions to guc_submission.h (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-7-daniele.ceraolospurio@intel.com
use intel_uc_uses_guc_submission() directly instead, to be consistent in
the way we check what we want to do with the GuC.
v2: do not go through ctx->vm->gt, use i915->gt instead
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> #v1
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-3-daniele.ceraolospurio@intel.com
use intel_uc_uses_guc() directly instead, to be consistent in the way we
check what we want to do with the GuC.
v2: split guc_log_info changes to their own patch (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-2-daniele.ceraolospurio@intel.com
Add a basic description about how DC3CO works to help people not
familiar with it.
While at it, I also improved the delayed work handle and function
names and removed a debug message that is ambiguous and not much
useful, no changes in behavior here.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205214945.131012-1-jose.souza@intel.com
Start manipulating DBuf slices as a mask,
but not as a total number, as current approach
doesn't give us full control on all combinations
of slices, which we might need(like enabling S2
only can't enabled by setting enabled_slices=1).
Removed wrong code from intel_get_ddb_size as
it doesn't match to BSpec. For now still just
use DBuf slice until proper algorithm is implemented.
Other minor code refactoring to get prepared
for major DBuf assignment changes landed:
- As now enabled slices contain a mask
we still need some value which should
reflect how much DBuf slices are supported
by the platform, now device info contains
num_supported_dbuf_slices.
- Removed unneeded assertion as we are now
manipulating slices in a more proper way.
v2: Start using enabled_slices in dev_priv
v3: "enabled_slices" is now "enabled_dbuf_slices_mask",
as this now sits in dev_priv independently.
v4: - Fixed debug print formatting to hex(Matt Roper)
- Optimized dbuf slice updates to be used only
if slice union is different from current conf(Matt Roper)
- Fixed some functions to be static(Matt Roper)
- Created a parameterized version for DBUF_CTL to
simplify DBuf programming cycle(Matt Roper)
- Removed unrequred field from GEN10_FEATURES(Matt Roper)
v5: - Removed redundant programming dbuf slices helper(Ville Syrjälä)
- Started to use parameterized loop for hw readout to get slices
(Ville Syrjälä)
- Added back assertion checking amount of DBUF slices enabled
after DC states 5/6 transition, also added new assertion
as starting from ICL DMC seems to restore the last DBuf
power state set, rather than power up all dbuf slices
as assertion was previously expecting(Ville Syrjälä)
v6: - Now using enum for DBuf slices in this patch (Ville Syrjälä)
- Removed gen11_assert_dbuf_enabled and put gen9_assert_dbuf_enabled
back, as we really need to have a single unified assert here
however currently enabling always slice 1 is enforced by BSpec,
so we will have to OR enabled slices mask with 1 in order
to be consistent with BSpec, that way we can unify that
assertion and against the actual state from the driver, but
not some hardcoded value.(concluded with Ville)
- Remove parameterized DBUF_CTL version, to extract it to another
patch.(Ville Syrjälä)
v7:
- Removed unneeded hardcoded return value for older gens from
intel_enabled_dbuf_slices_mask - this now is handled in a
unified manner since device info anyway returns max dbuf slices
as 1 for older platforms(Matthew Roper)
- Now using INTEL_INFO(dev_priv)->num_supported_dbuf_slices instead
of intel_dbuf_max_slices function as it is trivial(Matthew Roper)
v8: - Fixed icl_dbuf_disable to disable all dbufs still(Ville Syrjälä)
v9: - Renamed _DBUF_CTL_S to DBUF_CTL_S(Ville Syrjälä)
- Now using power_domain mutex to protect from race condition, which
can occur because intel_dbuf_slices_update might be running in
parallel to gen9_dc_off_power_well_enable being called from
intel_dp_detect for instance, which causes assertion triggered by
race condition, as gen9_assert_dbuf_enabled might preempt this
when registers were already updated, while dev_priv was not.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-6-stanislav.lisovskiy@intel.com
Current consensus that it is redundant as
we already have skl_ddb_values struct out there,
also this struct contains only single member
which makes it unnecessary.
v2: As dirty_pipes soon going to be nuked away
from skl_ddb_values, evacuating enabled_slices
to safer in dev_priv.
v3: Changed "enabled_slices" to be "enabled_dbuf_slices_num"
(Matt Roper)
v4: - Wrapped the line getting number of dbuf slices(Matt Roper)
- Removed indeed redundant skl_ddb_values declaration(Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-2-stanislav.lisovskiy@intel.com
We already have guc_is_running function, but it only reflects
firmware status, while to fully use GuC we need to know if we've
already established communication with it.
v2: also s/intel_guc_is_running/intel_guc_is_fw_running (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200131153706.109528-1-michal.wajdeczko@intel.com
Let's convert cdclk_state to be a proper global state. That allows
us to use the regular atomic old vs. new state accessor, hopefully
making the code less confusing.
We do have to deal with a few more error cases in case the cdclk
state duplication fails. But so be it.
v2: Fix new plane min_cdclk vs. old crtc min_cdclk check
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121140353.25997-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Now that we have the more formal global state thing let's
use if for memory bandwidth tracking. No real difference
to the current private object usage since we already
tried to avoid taking the single serializing lock needlessly.
But since we're going to roll the global state out to more
things probably a good idea to unify the approaches a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-16-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Our current global state handling is pretty ad-hoc. Let's try to
make it better by imitating the standard drm core private object
approach.
The reason why we don't want to directly use the private objects
is locking; Each private object has its own lock so if we
introduce any global private objects we get serialized by that
single lock across all pipes. The global state apporoach instead
uses a read/write lock type of approach where each individual
crtc lock counts as a read lock, and grabbing all the crtc locks
allows one write access.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-15-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Move the min_cdclk[] and min_voltage_level[] arrays under the
rest of the cdclk state. And while at it provide a simple
helper (intel_cdclk_clear_state()) to clear the state during
the ww_mutex backoff dance.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-6-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The linetime watermarks really have very little in common with the
plane watermarks. It looks to be cleaner to simply track them in
the crtc_state and program them from the normal modeset/fastset
paths.
The only dark cloud comes from the fact that the register is
still supposedly single buffered. So in theory it might still
need some form of two stage programming. Note that even though
HSW/BDWhave two stage programming we never computed any special
intermediate values for the linetime watermarks, and on SKL+
we don't even have the two stage stuff plugged in since everything
else is double buffered. So let's assume it's all fine and
continue doing what we've been doing.
Actually on HSW/BDW the value should not even change without
a full modeset since it doesn't account for pfit downscaling.
Thus only fastboot might be affected. But on SKL+ the pfit
scaling factor is take into consideration so the value may
change during any fastset.
As a bonus we'll plug this thing into the state
checker/dump now.
v2: Rebase due to bigjoiner prep
v2: Only compute ips linetime for IPS capable pipes.
Bspec says the register values is ignored for other
pipes, but in fact it can't even be written so the
state checker becomes unhappy if we don't compute
it as zero.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Add convenience helpers for the most common uncore operations with
struct drm_i915_private * as context rather than struct intel_uncore *.
The goal is to replace all instances of I915_READ(),
I915_POSTING_READ(), I915_WRITE(), I915_READ_FW(), and I915_WRITE_FW()
in display/ with these, to finally be able to get rid of the implicit
dev_priv local parameter use.
The idea is that any non-u32 reads or writes are special enough that
they can use the intel_uncore_* functions directly.
v2:
- rename the file intel_de.h
- move intel_de_wait_for_* there too
- also add de fw helpers
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121113915.9813-1-jani.nikula@intel.com
Replace the vm_idr + vm_idr_mutex to an XArray. The XArray data
structure is now used to implement IDRs, and provides its own locking.
We can simply remove the IDR wrapper and in the process also remove our
extra mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122161531.508903-1-chris@chris-wilson.co.uk
In the near future, we will want to start a GPU error capture from a new
context, from inside the softirq region of a forced preemption. To do
so requires us to break up the monolithic error capture to provide new
entry points with finer control; in particular focusing on one
engine/gt, and being able to compose an error state from little pieces
of HW capture.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110123059.1348712-1-chris@chris-wilson.co.uk
Recent improvements in the state tracking in i915 caused PSR to not be
enabled when reusing firmware/BIOS modeset, this is due to all initial
commits returning ealier in intel_atomic_check() as needs_modeset()
is always false.
To fix that here forcing the state compute phase in CRTC that is
driving the eDP that supports PSR once. Enable or disable PSR do not
require a fullmodeset, so user will still experience glitch free boot
process plus the power savings that PSR brings.
It was tried to set mode_changed in intel_initial_commit() but at
this point the connectors are not registered causing a crash when
computing encoder state.
v2:
- removed function return
- change arguments to match intel_hdcp_atomic_check
v3:
- replaced drm includes in intel_psr.h by forward declaration(Jani)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112253
Reported-by: <s.zharkoff@gmail.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106152128.195171-1-jose.souza@intel.com
Local memory objects are similar to our usual scatterlist, but instead
of using the struct page stored therein, we need to use the
sg->dma_address.
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200103204137.2131004-1-chris@chris-wilson.co.uk
We use the global device inode, shared amongst all files, and not the
user's device filp to provide the backing storage for the mmap. The
vma->vm_file provides a redundant reference that breaks existing
expected behaviour that closing the user's device fd will release the
resources bound to it, if a mmap persists. (Even without the
vma->vm_file, the mmap will persist past the user's fd as the storage is
bound to the device, i.e. our reference is on the object not file.)
Fixes: cc662126b4 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/919
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200101141007.755429-1-chris@chris-wilson.co.uk
The coarse power gating was disabled as part of commit 2248a28384
("drm/i915/gen8+: Add RC6 CTX corruption WA") as a prelude to recover
from the context corruption; the power gating itself has no direct
impact on the RC6 context corruption. However, that recovery scheme was
never implemented due to difficult corner cases, and so we no longer need
to keep the power gating disabled.
Fixes: 2248a28384 ("drm/i915/gen8+: Add RC6 CTX corruption WA")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/846
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231122708.4025916-1-chris@chris-wilson.co.uk
Provide a way to set the PTE within apply_page_range for discontiguous
objects in addition to the existing method of just incrementing the pfn
for a page range.
Fixes: cc662126b4 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET")
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231200356.409475-1-chris@chris-wilson.co.uk
IDR internally uses xarray so we can use it directly which simplifies our
code by removing the need to do external locking.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224095920.2386297-1-chris@chris-wilson.co.uk
Allocate only an internal intel_context for the kernel_context, forgoing
a global GEM context for internal use as we only require a separate
address space (for our own protection).
Now having weaned GT from requiring ce->gem_context, we can stop
referencing it entirely. This also means we no longer have to create random
and unnecessary GEM contexts for internal use.
GEM contexts are now entirely for tracking GEM clients, and intel_context
the execution environment on the GPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221160324.1073045-1-chris@chris-wilson.co.uk
The gen7 cmdparser is primarily a promotion-based system to allow access
to additional registers beyond the HW validation, and allows fallback to
normal execution of the user batch buffer if valid and requires
chaining. In the next patch, we will do the cmdparser validation in the
pipeline asynchronously and so at the point of request construction we
will not know if we want to execute the privileged and validated batch,
or the original user batch. The solution employed here is to execute
both batches, one with raised privileges and one as normal. This is
because the gen7 MI_BATCH_BUFFER_START command cannot change privilege
level within a batch and must strictly use the current privilege level
(or undefined behaviour kills the GPU). So in order to execute the
original batch, we need a second non-priviledged batch buffer chain from
the ring, i.e. we need to emit two batches for each user batch. Inside
the two batches we determine which one should actually execute, we
provide a conditional trampoline to call the original batch.
Implementation-wise, we create a single buffer and write the shadow and
the trampoline inside it at different offsets; and bind the buffer into
both the kernel GGTT for the privileged execution of the shadow and into
the user ppGTT for the non-privileged execution of the trampoline and
original batch. One buffer, two batches and two vma.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211230858.599030-1-chris@chris-wilson.co.uk
On glk+ the hardware gets confused if we disable FBC while
it's recompressing and we perform a plane update during the
same frame. The result is that top of the screen gets corrupted.
We can avoid that by giving the hardware enough time to finish
the FBC disable before we touch the plane registers. Ie. we need
an extra vblank wait after FBC disable.
v2: Don't do the vblank wait if we never activated FBC in hw
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128150338.12490-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Precompute the override cfb stride value so that we can check
it when determining if flip nuke can be used or not.
The hardware has 13 bits for this, so we can shrink the storage
to u16 while at it.
v2: Don't explode when crtc_state->enable_fbc lies to us
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The use GEM context itself was removed in commit cd30a50317
("drm/i915/gem: Excise the per-batch whitelist from the context"), but
the locals were left in place as an oversight. Remove the parameters and
clean up.
References: cd30a50317 ("drm/i915/gem: Excise the per-batch whitelist from the context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204232616.94397-1-chris@chris-wilson.co.uk
This is really just an alias of mmap_gtt. The 'mmap offset' nomenclature
comes from the value returned by this ioctl which is the offset into the
device fd which userpace uses with mmap(2).
mmap_gtt was our initial mmap_offset implementation, this extends
our CPU mmap support to allow additional fault handlers that depends on
the object's backing pages.
Note that we multiplex mmap_gtt and mmap_offset through the same ioctl,
and use the zero extending behaviour of drm to differentiate between
them, when we inspect the flags.
To support multiple mmap types on an object we need to support multiple
mmap_offsets for an object (each offset in the global device address
space corresponding to a unique instance of the object for a file + mmap
type). As we drop the simplified drm core idea of a single mmap_offset,
we need to provide replacement hooks for the dumb mmap interface as
well.
Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/1675
Testcase: igt/gem_mmap_offset
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204120032.3682839-1-chris@chris-wilson.co.uk
According to BSpec 53998, there is a mask of
max 8 SAGV/QGV points we need to support.
Bumping this up to keep the CI happy(currently
preventing tests to run), until all SAGV
changes land.
v2: Fix second plane where QGV points were
hardcoded as well.
v3: Change the naming of I915_NUM_SAGV_POINTS
to be I915_NUM_QGV_POINTS, as more meaningful
(Ville Syrjälä)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112189
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125160800.14740-1-stanislav.lisovskiy@intel.com
[vsyrjala: Add missing braces around else (checkpatch), fix Bugzilla tag]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
On some platforms (e.g. KBL) that do not support GuC submission, but
the user enabled the GuC communication (e.g for HuC authentication)
calling the GuC EXIT_S_STATE action results in lose of ability to
enter RC6. We can remove the GuC suspend/resume entirely as we do
not need to save the GuC submission status.
Add intel_guc_submission_is_enabled() function to determine if
GuC submission is active.
v2: Do not suspend/resume the GuC on platforms that do not support
Guc Submission.
v3: Fix typo, move suspend logic to remove goto.
v4: Use intel_guc_submission_is_enabled() to check GuC submission
status.
v5: No need to look at engine to determine if submission is enabled.
Squash fix + intel_guc_submission_is_enabled() patch into one.
v6: Move resume check into intel_guc_resume() for symmetry.
Fix commit Fixes tag.
Reported-by: KiteStramuort <kitestramuort@autistici.org>
Reported-by: S. Zharkoff <s.zharkoff@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623
Fixes: ffd5ce22fa ("drm/i915/guc: Updates for GuC 32.0.3 firmware")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Tomas Janousek <tomi@nomi.cz>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115231538.1249-1-don.hiatt@intel.com
It applies to all gen9 and gen10 now, so we can use a single test
against the gen bitmask.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115122755.830355-1-chris@chris-wilson.co.uk
