Change the dtsi include code to use the C pre-processor #include instead
of the device tree /include/. This enables option to use dt binding
headers.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Do not enable smmu via dtsi. Enable it in board file when needed.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Mainline kernel has r1p12 compatible string now. Use this new compatible
string and also append generic compatible string.
Keep in your mind that using this generic compatible string not all uart
features will be available.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Adding prefetchable memory space to pcie device tree node.
Shifting configuration space to 64-bit address space.
Removing pcie device tree node from amba as it requires size-cells=<2>
in order to access 64-bit address space.
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add debug console to dtsi to be able to enable it in
board dts file.
Keep in your mind that every core has separate dcc port in case you want
to run SMP kernel.
DCC is very helpful communication channel for debugging.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Added the idle-states node to describe zynqmp idle states. Only
cpu-sleep-0 idle state is added in this patch. References to the
idle-states node are added in all CPU nodes. Time values: entry/exit
latencies and min-residency, needs to be tuned. arm,psci-suspend-param
is selected to comply with PSCIv1.0 and Extended StateID format.
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>
Acked-by: Will Wong <willw@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This adds and enable the operating points that have been tested and are
currently supported by the SoC. This also adds clocks for ARMCLKL and
ARMCLKB.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK805 consists of 4 DCDCs, 3 LDOs. It's different from RK808
and RK818 that there are 2 output only GPIOs, we should add
properties "gpio-controller" and "gpio-cells = <2>".
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The usual improvement patches:
- PMIC, USB and WiFi enabled for Bananapi M64
- New board added: NanoPi A64
- New board added: Olimex A64-OLinuXino
-----BEGIN PGP SIGNATURE-----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=u/18
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
Pull "Allwinner arm64 device tree changes for 4.14, round 2" from Chen-Yu Tsai:
The usual improvement patches:
- PMIC, USB and WiFi enabled for Bananapi M64
- New board added: NanoPi A64
- New board added: Olimex A64-OLinuXino
* tag 'sunxi-dt64-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: Add A64-OLinuXino initial support
arm64: allwinner: a64: Add initial NanoPi A64 support
arm64: allwinner: a64: add proper support for the Wi-Fi on BPi M64
arm64: allwinner: a64: enable AXP803 for Banana Pi M64
arm64: allwinner: a64: enable USB host controller for BPi M64
Currently we are assigning mic irq to rt5514 i2c driver, which is wrong.
Assign it to rt5514 spi driver instead.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We need to init vop aclk and hclk incase the U-Boot does not do
the initialize.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There are 4 pwm channels built in rk3328 soc, need to configure
the both APB clock and bus clock.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to rt5514 dt-binding, it should be "realtek,dmic-init-delay-ms".
Fixes: 48f4d9796d (arm64: dts: rockchip: add Gru/Kevin DTS)
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Enable uSD on ESPRESSObin (Armada 37xx based board)
- Add NAND support on Armada 7K/8K SoCs
- Enable USB host on Armada-7040-DB and Armada-8040-DB boards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlmWtIYACgkQCwYYjhRyO9V67ACfUFPrkPl8Qn34OAjklU+hVPR9
YJIAn0EI8S47gAuQe0bzEmU45qALL/Xv
=Vf0A
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.14-2' of git://git.infradead.org/linux-mvebu into next/dt64
Pull "mvebu dt64 for 4.14 (part 2)" from Gregory CLEMENT:
- Enable uSD on ESPRESSObin (Armada 37xx based board)
- Add NAND support on Armada 7K/8K SoCs
- Enable USB host on Armada-7040-DB and Armada-8040-DB boards
* tag 'mvebu-dt64-4.14-2' of git://git.infradead.org/linux-mvebu:
ARM64: dts: marvell: enable USB host on Armada-8040-DB
ARM64: dts: marvell: enable USB host on Armada-7040-DB
ARM64: dts: marvell: add NAND support on the CP110
ARM64: dts: marvell: armada-37xx: Enable uSD on ESPRESSObin
arm64: dts: marvell: Fully re-order nodes in Marvell CP110 dtsi files
* Add PFC device node to R-Car D3 (r8a77995)
This is a step towards enabling devices that use multiplexed pins
- including ethernet - on boards that use the r8a7796 SoC.
* Add USB nodes to R-Car M3-W (r8a7796)
This is a step towards enabling USB devices on boards that
use the r8a7796 SoC.
* Use newly added Gen-3 fallback compat string
This is consistent with ongoing efforts to use per-generation
fallback strings where appropriate across devices found
on R-Car SoCs. The aim of the effort being to strike a balance
between the limited information available about the compatibility
of devices found on different SoCs and the desire to ease enabling
devices on new SoCs.
This has no run-time effect due to the presence of a per-SoC
compat string.
* Cleanup whitespace and extra LVDS port label
Minor cleanups, no run-time effect.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6XqO
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
Pull "Second Round of Renesas ARM64 Based SoC DT Updates for v4.14" from Simon Horman:
* Add PFC device node to R-Car D3 (r8a77995)
This is a step towards enabling devices that use multiplexed pins
- including ethernet - on boards that use the r8a7796 SoC.
* Add USB nodes to R-Car M3-W (r8a7796)
This is a step towards enabling USB devices on boards that
use the r8a7796 SoC.
* Use newly added Gen-3 fallback compat string
This is consistent with ongoing efforts to use per-generation
fallback strings where appropriate across devices found
on R-Car SoCs. The aim of the effort being to strike a balance
between the limited information available about the compatibility
of devices found on different SoCs and the desire to ease enabling
devices on new SoCs.
This has no run-time effect due to the presence of a per-SoC
compat string.
* Cleanup whitespace and extra LVDS port label
Minor cleanups, no run-time effect.
* tag 'renesas-arm64-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: r8a77995: add pfc device node
arm64: dts: r8a7796: Add HSUSB device node
arm64: dts: r8a7796: Add USB-DMAC device nodes
arm64: dts: r8a7796: Add USB3.0 host device node
arm64: dts: r8a7796: add USB2.0 Host (EHCI/OHCI) device nodes
arm64: dts: r8a7796: add usb2_phy device nodes
arm64: dts: r8a7795: correct whitespace of companion property
arm64: dts: r8a7795: Use R-Car SATA Gen3 fallback compat string
arm64: dts: salvator-common: Remove extra LVDS port label
* Add IPQ8074 SoC and HK01 board support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JCl4
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64
Pull "Qualcomm ARM64 Updates for v4.14 Part 2" from Andy Gross:
* Add IPQ8074 SoC and HK01 board support
* tag 'qcom-arm64-for-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: Add ipq8074 SoC and HK01 board support
4.14, please pull the following:
- Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance
problem and would have required either duplication or cross merges
- Stefan changes how the pinmuxing is defined and pushes it at the board level
to support Raspberry Pi Zero Wireless. He then adds supports for the actual
Raspberry Pi Zero Wireless board along with binding documentation. Stefan
also defines a proper SMP enable-method property and binding for BCM2836
(Raspbery Pi 2)
- Rafal describes the BCM5301X USB ports correctly in Device Tree such that
it becomes possible to assign them to specific LED triggers (e.g: USB activity).
He does the same thing for BCM53573 and defines default LED triggers for USB.
- Jon provides a fix for Northstar Plus which consists in correctly defining
the "dma-coherent" property for peripherals which are DMA coherent. He also
does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY
and host controller support for NorthStar Plus
- Florian adds support for Broadcom's BCM947189ACDBMR reference board which is
based on BCM47182/53573 and which supports external MoCA (BCM6802)
- Ray fixes the wrong UART2 base address for Cygnus
- Scott moves the v3d node in the proper unit address order and defines the correct
UART alias for the BCM91130_entphn reference board to be UART3
- Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit
- Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file:
SDHCI, Keypad, SPI, DMA and pinmux configurations
- Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes
-----BEGIN PGP SIGNATURE-----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=WUr3
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.14/devicetree' of http://github.com/Broadcom/stblinux into next/dt
Pull "Broadcom devicetree changes for 4.14" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs Device Tree changes for
4.14, please pull the following:
- Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance
problem and would have required either duplication or cross merges
- Stefan changes how the pinmuxing is defined and pushes it at the board level
to support Raspberry Pi Zero Wireless. He then adds supports for the actual
Raspberry Pi Zero Wireless board along with binding documentation. Stefan
also defines a proper SMP enable-method property and binding for BCM2836
(Raspbery Pi 2)
- Rafal describes the BCM5301X USB ports correctly in Device Tree such that
it becomes possible to assign them to specific LED triggers (e.g: USB activity).
He does the same thing for BCM53573 and defines default LED triggers for USB.
- Jon provides a fix for Northstar Plus which consists in correctly defining
the "dma-coherent" property for peripherals which are DMA coherent. He also
does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY
and host controller support for NorthStar Plus
- Florian adds support for Broadcom's BCM947189ACDBMR reference board which is
based on BCM47182/53573 and which supports external MoCA (BCM6802)
- Ray fixes the wrong UART2 base address for Cygnus
- Scott moves the v3d node in the proper unit address order and defines the correct
UART alias for the BCM91130_entphn reference board to be UART3
- Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit
- Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file:
SDHCI, Keypad, SPI, DMA and pinmux configurations
- Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes
* tag 'arm-soc/for-4.14/devicetree' of http://github.com/Broadcom/stblinux:
ARM: BCM53573: Specify ports for USB LED for Tenda AC9
ARM: dts: cygnus: Add generic-ehci/ohci nodes
ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn
ARM: dts: cygnus: Add additional peripherals to dtsi
ARM: dts: cygnus: Enable Performance Monitoring Unit
ARM: dts: cygnus: place v3d in proper address ordered location
ARM: dts: cygnus: Fix incorrect UART2 register base
ARM: dts: bcm283x: Add 32-bit enable method for SMP
dt-bindings: arm: add SMP enable-method for BCM2836
ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support
ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few devices
ARM: dts: NSP: Add USB3 and USB3 PHY to NSP
ARM: dts: NSP: Rearrage USB entries
ARM: dts: NSP: Add dma-coherent to relevant DT entries
ARM: dts: bcm2835: Add Raspberry Pi Zero W
dt-bindings: bcm: Add Raspberry Pi Zero W
ARM: bcm283x: Define UART pinmuxing on board level
ARM: dts: BCM5301X: Specify USB ports for each controller
ARM: dts: bcm283x: Move the BCM2837 DT contents from arm64 to arm.
- A clean up patch from Shawn Lin to remove the deprecated dwmmc
property 'num-slots' from ZX296718 device tree.
- Enable various devices for ZX296718 SoC support, VGA display, I2S
audio, pinctrl, GPIO, PWM and IRDEC.
- Update zx296718-evb support to use audio-graph-card for HDMI audio
and add I2S sound card.
- Add initial zx296718-pcbox board support with storage, audio,
display devices enabled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZlo4KAAoJEFBXWFqHsHzOee0H/RcMMznh0cKg8UjjlbAuhArW
4IxmA05TzYBN0VeLNwAzPMn3yrbSZPk5bm7MD/+csv6NuFF2NDlvshyAqWAYueaY
cLXnQvqE3axK5X9xkfQYKvk0OHhj/xIKzEdnJ3++EwEtnibUEl9g8kunopzTQOaq
BsOFTTfuey98hCg4WQSpGIqRhfpKXt/UV63e93TuPs1g0/fpmoooMTQdUE+Wmctq
y1JJb3OC5HMp/NkQRJobmUa2r6R+3T8gmvgFopoBVP543zR5kwJ7bCDXgkzZwIbV
jtLDVCfg+DAapSFpCbULkvOMMZo/rxjAFxP2b8ICFCzNC9zgWpoSAN8ut1Oznk0=
=hAsg
-----END PGP SIGNATURE-----
Merge tag 'zte-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
Pull "ZTE arm64 device tree updates for 4.14" from Shawn Guo:
- A clean up patch from Shawn Lin to remove the deprecated dwmmc
property 'num-slots' from ZX296718 device tree.
- Enable various devices for ZX296718 SoC support, VGA display, I2S
audio, pinctrl, GPIO, PWM and IRDEC.
- Update zx296718-evb support to use audio-graph-card for HDMI audio
and add I2S sound card.
- Add initial zx296718-pcbox board support with storage, audio,
display devices enabled.
* tag 'zte-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: zte: add initial zx296718-pcbox board support
arm64: dts: zx296718-evb: add I2S sound card support
arm64: dts: zx296718-evb: use audio-graph-card for HDMI audio
arm64: dts: zx296718: add irdec device for remote control
arm64: dts: zx296718: add PWM device support
arm64: dts: zx296718: add voltage data into OPP table
arm64: dts: zx296718: set a better parent clock for I2S0
arm64: dts: zx296718: add pinctrl and gpio devices
arm64: dts: zx296718: add I2S and I2C audio codec
arm64: dts: zx296718: add VGA device support
arm64: dts: zte: remove num-slots from zx296718
- Correct the typo in fsl-ls1088a-rdb board name.
- A series from Horia Geantă to consolidate aliases node and enable
crypto support for ls208xa and ls1088a.
- Enable USB host support for ls1012a.
- Enable cpuidle support for ls1088a and ls208xa.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZlodKAAoJEFBXWFqHsHzOLYAIAIs6YEEhjbJiet6EMmwpneJo
hTGcU/Gv6q6ozF3uV1+oMqnv64rlzwPR8jTjt29+lCS2I4/zv7Zfr83GR1iMtW90
hIKUMnWwX/ATY1BC4YB36E0Z0WRolNoKU6iKBujMsfxPFRBXulEQwngZoFS5EvHy
TDqCTTRHBHhnzPqMPSJ3q/3r6VPTHDtj1ap+zF8EsS156ybPHhajHm/+u3Kvh6Kh
MnI+Y/SHPFCmy2Pj34SsixGKBEwAukyeddbufUlnrP3wcDnIvv64SWURCsBygEww
jhAD8rYWCFyhqM4vBbQ8AvXrKJkJDZETRy1GTTwDK2MjWeIzY6JtZ+cOGtyBTwU=
=6GLX
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
Pull "Freescale arm64 device tree updates for 4.14" from Shawn Guo:
- Correct the typo in fsl-ls1088a-rdb board name.
- A series from Horia Geantă to consolidate aliases node and enable
crypto support for ls208xa and ls1088a.
- Enable USB host support for ls1012a.
- Enable cpuidle support for ls1088a and ls208xa.
* tag 'imx-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ls1088: Correction in Board name from "L1088A" to "LS1088A"
arm64: dts: ls208xa: add cpu idle support
arm64: dts: ls1088a: add cpu idle support
arm64: dts: freescale: ls1088a: add crypto node
arm64: dts: freescale: ls208xa: add crypto node
arm64: dts: freescale: ls208xa: share aliases node
arm64: dts: ls1012a: add USB host controller nodes
4.14, please pull the following:
- Scott moves all the Northstar 2 DTS files into a sub-directory to be consistent
with what was done for stingray and to future proof the addition of new board
DTS files
- Velibor adds the ARM CCN-502 interconnect DT node to the Stingray SoC
DTS include file
- Srinath adds the MDIO multiplexer and SATA nodes to the Stingray DTS
include files
- Anup adds the SP804 timers, FlexRM (mailbox) and RAID engine DT nodes
to the Stingray DTS include files
- Abishek adds the BGMAC (Ethernet controller) node to the Stingray DTS
files
-----BEGIN PGP SIGNATURE-----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=0wLC
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.14/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64
Pull "Broadcom devicetree-arm64 changes for 4.14" from Florian Fainelli:
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
4.14, please pull the following:
- Scott moves all the Northstar 2 DTS files into a sub-directory to be consistent
with what was done for stingray and to future proof the addition of new board
DTS files
- Velibor adds the ARM CCN-502 interconnect DT node to the Stingray SoC
DTS include file
- Srinath adds the MDIO multiplexer and SATA nodes to the Stingray DTS
include files
- Anup adds the SP804 timers, FlexRM (mailbox) and RAID engine DT nodes
to the Stingray DTS include files
- Abishek adds the BGMAC (Ethernet controller) node to the Stingray DTS
files
* tag 'arm-soc/for-4.14/devicetree-arm64' of http://github.com/Broadcom/stblinux:
arm64: dts: Add SBA-RAID DT nodes for Stingray SoC
arm64: dts: Add FlexRM DT nodes for Stingray
arm64: dts: Add SATA DT nodes for Stingray SoC
arm64: dts: Add DT node to enable BGMAC driver on Stingray
arm64: dts: Add sp804 DT nodes for Stingray SoC
arm64: dts: Add MDIO multiplexer DT node for Stingray
arm64: dts: Enable stats for CCN-502 interconnect on Stingray
arm64: dts: move ns2 into northstar2 directory
Three fixes adding a missing alias for the Ethernet controller on A64
boards. One adding a missing interrupt for the pin controller.
-----BEGIN PGP SIGNATURE-----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=lSDD
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Pull "Allwinner fixes for 4.13, round 2" from Chen-Yu Tsai:
Three fixes adding a missing alias for the Ethernet controller on A64
boards. One adding a missing interrupt for the pin controller.
* tag 'sunxi-fixes-for-4.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: h5: fix pinctrl IRQs
arm64: allwinner: a64: sopine: add missing ethernet0 alias
arm64: allwinner: a64: pine64: add missing ethernet0 alias
arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias
RK3399 USB DWC3 controller has a issue that FS/LS devices not
recognized if inserted through USB 3.0 HUB. It's because that
the inter-packet delay between the SSPLIT token to SETUP token
is about 566ns, more then the USB spec requirement.
This patch adds a quirk "snps,dis-tx-ipgap-linecheck-quirk" to
disable the u2mac linestate check to decrease the SSPLIT token
to SETUP token inter-packet delay from 566ns to 466ns.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
After adding the clock subsystem to the SOC, the dummy
clock clk32k is not longer needed. Delete it.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Use newly added R-Car SATA Gen3 fallback compat string
in the DT of the r8a7795 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before the fallback compat string is considered.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
The DU LVDS output is on port 3 on R8A7795 but on port 2 on R8A7796. The
lvds_connector label thus can't be defined in salvator-common.dtsi,
common to the two SoCs.
The lvds_connector label is meant for convenience to be referenced from
panel device tree files, such as r8a77xx-aa104xd12-panel.dtsi or
r8a77xx-aa121td01-panel.dtsi. As those files are not included in any
device tree source, and the label never used elsewhere, we can simply
remove it. Out-of-tree patches that include panel device tree files can
then add a
#define lvds_connector du_out_lvds0
before including the panel device tree file.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* Avoid audio_clkout naming conflict for salvator boards using
Renesas R-Car Gen 3 SoCs
Morimoto-san says "The clock name of "audio_clkout" is used by the
Renesas sound driver. This duplicated naming breaks its clock
registering/unregistering. Especially when unbind/bind it can't handle
clkout correctly. This patch renames "audio_clkout" to "audio-clkout" to
avoid the naming conflict."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=meey
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes4-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Pull "Fourth Round of Renesas ARM Based SoC Fixes for v4.13" from Simon Horman:
* Avoid audio_clkout naming conflict for salvator boards using
Renesas R-Car Gen 3 SoCs
Morimoto-san says "The clock name of "audio_clkout" is used by the
Renesas sound driver. This duplicated naming breaks its clock
registering/unregistering. Especially when unbind/bind it can't handle
clkout correctly. This patch renames "audio_clkout" to "audio-clkout" to
avoid the naming conflict."
* tag 'renesas-fixes4-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: renesas: salvator-common: avoid audio_clkout naming conflict
1. Replaces old coresight ATB programmable replicator compatible with
new and more generic one
2. Replaces incorrect usage of underscores for device node names in the
device tree with hyphen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jaSe
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
Pull "ARMv8 Vexpress/Juno DT updates for v4.14" from Sudeep Holla:
1. Replaces old coresight ATB programmable replicator compatible with
new and more generic one
2. Replaces incorrect usage of underscores for device node names in the
device tree with hyphen
* tag 'juno-updates-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: replace underscores with hyphen in device node names
arm64: dts: juno: Use the new coresight replicator string
The usual improvement patches:
- R_INTC interrupt controller enabled for the A64 SoC
- AXP803 PMIC added and enabled on the Pine64 and SoPine boards
-----BEGIN PGP SIGNATURE-----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=9oen
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
Pull "Allwinner arm64 DT changes for 4.14" from Chen-Yu Tsai:
The usual improvement patches:
- R_INTC interrupt controller enabled for the A64 SoC
- AXP803 PMIC added and enabled on the Pine64 and SoPine boards
* tag 'sunxi-dt64-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: add AXP803 PMIC support to SoPine and the baseboard
arm64: allwinner: a64: enable AXP803 regulators for Pine64
arm64: allwinner: a64: add DTSI file for AXP803 PMIC
arm64: allwinner: a64: add AXP803 node to Pine64 device tree
arm64: allwinner: a64: add NMI (R_INTC) controller on A64
and the use of keep-power-in-suspend in non-sdio nodes as well as the
removal of the deprecated num-slots property from dwmmc nodes.
rk3328 gets support for spdif, io-domains and usb (including enablement
of usb on the evaluation board), while rk3368 gains support for spdif.
The biggest chunk of course aims for the rk3399 with a number of pcie
changes, support for the mali gpu, a new power-domain, sdmmc support
on the firefly board and dynamic-power-coefficients.
The gru family also gets support for their quite central pwm regulators
using the newly introduced vctrl regulator types.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmET9EQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgZbjCACKFO9Hp8Xwwg2nEM8DL3i+MlGaqxjIrcsb
WskuVOJjkAA4hMnrd7XvbpzJJusAquGqMd042ZCWtrNa1AwzCy0ZkYjDFNL27rXH
DqrHmJZowSoTHxlo8QKaevXH3ZZnp8TDz4IqaD0+UZx7DgZSOjR1a+feseh1Jn/V
9WBUJhNAFtKMiJBkTIpaDUk0E6OxIspdvlJurYmwUvDbfZKlpZrXHYKXSuUhFS9s
JX4Dqi5eF96Mctpi8GhaHGf7awPQf4oQBZfsXxhhS/efzX/v0HWqUPt40o2THi0F
ZbFFE3xAFaWisA+cbg8xnzJc8ZAwz2UmS6FgQ9lrqKyGN74buwgP
=spNi
-----END PGP SIGNATURE-----
Merge tag 'v4.14-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
Pull "Rockchip dts64 changes for 4.14" from Heiko Stübner:
64bit Rockchip devicetree changes containing fixes for pinctrl typos
and the use of keep-power-in-suspend in non-sdio nodes as well as the
removal of the deprecated num-slots property from dwmmc nodes.
rk3328 gets support for spdif, io-domains and usb (including enablement
of usb on the evaluation board), while rk3368 gains support for spdif.
The biggest chunk of course aims for the rk3399 with a number of pcie
changes, support for the mali gpu, a new power-domain, sdmmc support
on the firefly board and dynamic-power-coefficients.
The gru family also gets support for their quite central pwm regulators
using the newly introduced vctrl regulator types.
* tag 'v4.14-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: update dynamic-power-coefficient for rk3399
arm64: dts: rockchip: add rk3328 spdif node
arm64: dts: rockchip: add rk3368 spdif node
arm64: dts: rockchip: enable sdmmc controller on rk3399-firefly
arm64: dts: rockchip: Add rk3328 io-domain node
arm64: dts: rockchip: kill pcie_clkreqn and pcie_clkreqnb for rk3399
arm64: dts: rockchip: change clkreq mode for rk3399-firefly
arm64: dts: rockchip: enable the GPU for RK3399-GRU
arm64: dts: rockchip: add ARM Mali GPU node for RK3399 SoCs
dt-bindings: gpu: add the RK3399 mali for rockchip specifics
arm64: dts: rockchip: remove abused keep-power-in-suspend
arm64: dts: rockchip: remove num-slots from all platforms
arm64: dts: rockchip: change clkreq mode for rk3399-evb
arm64: dts: rockchip: add SdioAudio pd control for rk3399
arm64: dts: rockchip: enable usb2 for RK3328 evaluation board
arm64: dts: rockchip: add usb2 nodes for RK3328 SoCs
arm64: dts: rockchip: set rk3399 dynamic CPU power coefficients
arm64: dts: rockchip: Use vctrl regulators for dynamic CPU voltages on Gru/Kevin
arm64: dts: rockchip: Update CPU regulator voltage ranges for Gru
arm64: dts: rockchip: fix typo in mmc pinctrl
* Add usb2.0 for R-Car H3 (r8a7795) ES2.0 SoC
* Add R-Car D3 (r8a77995) SoC and Draak board support
Adds minimal support for the R-Car D3 SoC and the Draak development
board, allowing to boot from a ramdisk using a serial console.
* Add Add VC6 clock generator to R-Car H3 (r8a7795)/Salvator-XS board
The VC6 is an I2C-controlled programmable clock generator, used on the
board to provide a display dot clock. Add it to DT.
* Add missing second pair of DMA names to MSIOF nodes to
R-Car M3-W (r8a7796) SoC
MSIOF0 and MSIOF1 are tied to two DMA controllers through two pairs of
DMA specifiers. However, the second pair of corresponding DMA names was
missing.
* Add support for the DU to R-Car H3 (r8a7795) SoC
Add a compatible string and VSP links to the DU node. The H3 ES1.x and H3
ES2.0 are compatible save for the links to the VSPs that are described
explicitly in DT, so there's no need for a new ES2-specific compatible
string.
* Enable HDMI on R-Car H3 (r8a7795) and M3-W (r8a7796) ULCB boards
* Enable DU on R-Car M3-W (r8a7796) Salvator-X board
* Enable I2C for DVFS on R-Car H3 (r8a7795) and M3-W (r8a7796) ULCB boards
* Add Add DRIF support to R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
Ramesh Shanmugasundaram says, "R-Car Gen3 DRIF is a SPI like receive only
slave device."
* Move CPG_AUDIO_CLK_I from board to soc files
Geert Uytterhoeven says, "The definition of CPG_AUDIO_CLK_I is
SoC-specific, not board-specific."
* Add IMR-LX4 support to R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
Sergei Shtylyov says, "The image renderer light extended 4 (IMR-LX4) or
the distortion correction engine is a drawing processor with a simple
instruction system capable of referencing data on an external memory as
2D texture data and performing texture mapping and drawing with respect
to any shape that is split into triangular objects."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ehXW
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
Pull "Renesas ARM64 Based SoC DT Updates for v4.14" from Simon Horman:
* Add usb2.0 for R-Car H3 (r8a7795) ES2.0 SoC
* Add R-Car D3 (r8a77995) SoC and Draak board support
Adds minimal support for the R-Car D3 SoC and the Draak development
board, allowing to boot from a ramdisk using a serial console.
* Add Add VC6 clock generator to R-Car H3 (r8a7795)/Salvator-XS board
The VC6 is an I2C-controlled programmable clock generator, used on the
board to provide a display dot clock. Add it to DT.
* Add missing second pair of DMA names to MSIOF nodes to
R-Car M3-W (r8a7796) SoC
MSIOF0 and MSIOF1 are tied to two DMA controllers through two pairs of
DMA specifiers. However, the second pair of corresponding DMA names was
missing.
* Add support for the DU to R-Car H3 (r8a7795) SoC
Add a compatible string and VSP links to the DU node. The H3 ES1.x and H3
ES2.0 are compatible save for the links to the VSPs that are described
explicitly in DT, so there's no need for a new ES2-specific compatible
string.
* Enable HDMI on R-Car H3 (r8a7795) and M3-W (r8a7796) ULCB boards
* Enable DU on R-Car M3-W (r8a7796) Salvator-X board
* Enable I2C for DVFS on R-Car H3 (r8a7795) and M3-W (r8a7796) ULCB boards
* Add Add DRIF support to R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
Ramesh Shanmugasundaram says, "R-Car Gen3 DRIF is a SPI like receive only
slave device."
* Move CPG_AUDIO_CLK_I from board to soc files
Geert Uytterhoeven says, "The definition of CPG_AUDIO_CLK_I is
SoC-specific, not board-specific."
* Add IMR-LX4 support to R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
Sergei Shtylyov says, "The image renderer light extended 4 (IMR-LX4) or
the distortion correction engine is a drawing processor with a simple
instruction system capable of referencing data on an external memory as
2D texture data and performing texture mapping and drawing with respect
to any shape that is split into triangular objects."
* tag 'renesas-arm64-dt-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (31 commits)
arm64: dts: renesas: r8a7795: add hsusb ch3 device node
arm64: dts: renesas: r8a7795: add usb-dmac ch2 and ch3 device nodes
arm64: dts: renesas: r8a7795: add usb2.0 host ch3 device nodes
arm64: dts: renesas: r8a7795: add usb2_phy ch3 device node
arm64: dts: renesas: r8a7795: Add usb companion property in EHCI
arm64: dts: renesas: Add Renesas Draak board support
arm64: dts: renesas: Add Renesas R8A77995 SoC support
arm64: renesas: Add Renesas R8A77995 Kconfig support
arm64: dts: r8a7795: salvator-xs: Connect DU dot clocks 0 and 3
arm64: dts: salvator-xs: Add VC6 clock generator
arm64: dts: r8a7796: Add missing second pair of DMA names to MSIOF nodes
arm64: dts: r8a7795: Add all MSIOF nodes
arm64: dts: r8a7795: Add support for the DU
arm64: dts: ulcb: Enable HDMI output
arm64: dts: ulcb: Add HDMI output connector
arm64: dts: r8a7796: m3ulcb: Add DU external dot clocks
arm64: dts: r8a7795: h3ulcb: Add DU external dot clocks
arm64: dts: ulcb: Add DU external dot clock sources
arm64: dts: r8a7796: salvator-x: Enable HDMI output
arm64: dts: r8a7796: salvator-x: Add DU external dot clocks
...
1. Remove deprecated and unneeded properties from Exynos boards.
2. Implement proper (working) support for USB On-The-Go on Exynos5433
TM2/TM2E boards.
-----BEGIN PGP SIGNATURE-----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=hQn1
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Pull "Samsung DTS ARM64 changes for v4.14" from Krzysztof Kozłowski:
1. Remove deprecated and unneeded properties from Exynos boards.
2. Implement proper (working) support for USB On-The-Go on Exynos5433
TM2/TM2E boards.
* tag 'samsung-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Remove num-slots from exynos platforms
arm64: dts: exynos: Add extcon property for TM2 and TM2E
arm64: dts: exynos: Fix wrong label for USB 3.0 controller node
arm64: dts: exynos: Remove the OF graph from DSI node
This patch adds the IOMMU node for the IOMMU that resides on the
Qualcomm MSM8916 platforms.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the Qualcomm Venus video codec node for the video
codec hardware residing on MSM8916 platforms.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch is to add watchdog binding for Hi3660 on Hikey960 board.
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Zhong Kaihua <zhongkaihua@huawei.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch reserves some memory in the DTS and sets up a
pstore device tree node to enable pstore support on HiKey960.
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add support to hikey960 dts for the syscon-reboot-mode driver.
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
There are two clusters on the Hi3660, the first one is Cortex-A53 based
and the other one is Cortex-A73 based. These two clusters have different
idle states.
Thanks to Daniel Lezcano's recent changes, the generic ARM cpuidle
driver can now support several clusters with different idle states, thus
supporting the big.Little architecture.
In addition to the WFI idle state which is the default shallowest state
for all ARM cpus, the Hi3660 supports the following states:
- CA53 CPUs:
- CPU_SLEEP: CPU power off state
- CLUSTER_SLEEP_0: Cluster power off state
- CA73 CPUs:
- CPU_NAP: CPU retention state
- CPU_SLEEP: CPU power off state
- CLUSTER_SLEEP_1: Cluster power off state
This patch adds the idle states description for the Hi3660 to the device
tree.
Cc: Kevin Wang <jean.wangtao@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch adds the Qualcomm Adreno GPU node that exists in the
MSM8916.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
NanoPi A64 is a new board of high performance with low cost
designed by FriendlyElec., using the Allwinner A64 SOC.
Nanopi A64 features
- Allwinner A64, 64-bit Quad-core Cortex-A53@648MHz to 1.152GHz, DVFS
- 1GB DDR3 RAM
- MicroSD
- Gigabit Ethernet (RTL8211E)
- Wi-Fi 802.11b/g/n
- IR receiver
- Audio In/Out
- Video In/Out
- Serial Debug Port
- microUSB 5V 2A DC power-supply
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Enable USB host on Armada-8040-DB by adding USB PHY nodes for the
following ports:
- host 0 and 1 of CPM
- host 0 of CPS
These PHY are enabled by lanes coming from regulators based on two
I2C expanders.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add I2C expander and USB host PHY (host 0 and host 1) to enable
USB VBUS on USB ports of type A on Armada-7040-DB.
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The NAND controller used in A7K/A8K is present on the CP110. It is
compatible with the pxa-nand driver.
However, due to the limiation of the pins available this controller is
only usable on the CPM for A7K and on the CPS for A8K.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add one PCIe host controller node for HiSilicon Hip07 SoC and enable it in
D05 board.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The pin controller of H5 has three IRQs at the chip's GIC, which
represents three banks of pinctrl IRQs. However, the device tree used to
miss the third IRQ of the pin controller, which makes the PG bank IRQ
not usable.
Add the missing IRQ to the pinctrl node.
Fixes: 4e36de179f ("arm64: allwinner: h5: add Allwinner H5 .dtsi")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
It adds the initial zx296718-pcbox board support with devices like
storage, audio and VGA output enabled.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
It enables the I2S sound card support, which is used to drive audio
through aud96p22 codec in case of TV output.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Instead of simple-audio-card, audio-graph-card is recommended for audio
bindings. Let's change to it, so that the HDMI/SPDIF audio card can
align with the new I2S/Codec card which will be added later.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
We will enable PWM device to control voltage through pwm-regulator
support. So let's add voltage data into OPP table.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The default I2S0 parent clock AUDIO_24M can not be divided into required
sample rate in some cases, for example when 48KHz is needed. Change the
parent clock to AUDIO_99M which works for most sample rates.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
It adds VGA device in zx296718.dtsi, so that boards with VGA connector
can enable the support by changing 'status' in board DTS file.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
ls208xa supports another cpu idle state which is pw20 which saves
more power when cpu is idle.
It was implemented through psci firmware.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ls1088a supports another cpu idle state which is ph20 which saves
more power when cpu is idle.
It was implemented through psci firmware.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When adding the rk3399 sapphire som, two more of the recently removed
num-slots properties of dw-mmc nodes slipped in.
Remove them again.
Fixes: 8164a84cca ("arm64: dts: rockchip: Add support for rk3399 sapphire SOM")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add NAND controller node to LD11 and LD20. Neither of them supports
the CS1 line, so pinctrl is set up for a single CS line.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Enable the gmac2phy, make the gmac2phy work on
the rk3328-evb board.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The gmac2phy controller of rk3328 is connected to integrated PHY
directly inside, add the node for the integrated PHY support.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
add thermal zone and dynamic CPU power coefficients for rk3328
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
add tsadc needed main information for rk3328 SoC.
50000Hz is the max clock rate supported by tsadc module.
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
BPi M64 has an AP6212 Wi-Fi/Bluetooth combo module, and the Wi-Fi SDIO
card is connected to the mmc1 controller.
The pwrseq of the mmc1 (used to reset the card) used to missing, and the
out-of-band interrupt line of the card is not specified.
Fix these issues for proper Wi-Fi support of BPi M64.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Banana Pi M64 board uses an AXP803 PMIC.
Enable the PMIC and its regulators.
As we have now proper regulators support, missing or dummy regulators
are changed to the correct ones.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Banana Pi M64 connects the USB host-only controller on A64 SoC to a USB
hub, which provided the two USB Type-A ports on the board.
Enable the USB host controller.
The OTG function of the Micro-USB port needs the drivevbus function of
the AXP803 driver implemented, so it's not enabled now.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
