The shrinker cannot touch objects used by the contexts (logical state
and ring). Currently we mark those as "pin_global" to let the shrinker
skip over them, however, if we remove them from the shrinker lists
entirely, we don't event have to include them in our shrink accounting.
By keeping the unshrinkable objects in our shrinker tracking, we report
a large number of objects available to be shrunk, and leave the shrinker
deeply unsatisfied when we fail to reclaim those. The shrinker will
persist in trying to reclaim the unavailable objects, forcing the system
into a livelock (not even hitting the dread oomkiller).
v2: Extend unshrinkable protection for perma-pinned scratch and guc
allocations (Tvrtko)
v3: Notice that we should be pinned when marking unshrinkable and so the
link cannot be empty; merge duplicate paths.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802212137.22207-1-chris@chris-wilson.co.uk
We don't have to immediately fail on WOPCM partitioning, we can wait
until we will start programming WOPCM registers. This should give us
more options if we decide to restore fallback in case of GuC failures.
v3: rebased
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802184055.31988-7-michal.wajdeczko@intel.com
Inject probe errors into intel_uc_init_hw to make sure we
correctly handle any uC initialization failure.
To avoid complains from CI about injected errors use
i915_probe_error to lower message level.
v4: rebased after moving hot fixes moved to separate patches
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802184055.31988-6-michal.wajdeczko@intel.com
On Gen9 when we try to reload HuC due to GuC upload error, we hit:
<7> [232.025927] [drm:intel_uc_init_hw [i915]] GuC fw load failed: -8; will reset and retry 2 more time(s)
<7> [232.026004] [drm:intel_uc_fw_upload [i915]] HuC fw load i915/kbl_huc_ver02_00_1810.bin
<7> [232.026686] [drm:intel_uc_fw_upload [i915]] HuC fw xfer completed
<6> [232.026688] [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0)
<3> [232.026703] intel_uc_fw_copy_rsa:541 GEM_BUG_ON(!intel_uc_fw_is_available(uc_fw))
as firmware that previously failed to load was wrongly treated as
unavailable since its status code was not matching status check logic.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802184055.31988-4-michal.wajdeczko@intel.com
On Gen9 when we try to reload HuC due to GuC upload error, we hit:
<7> [229.656688] [drm:intel_uc_init_hw [i915]] GuC fw load failed: -8; will reset and retry 2 more time(s)
<7> [229.656739] [drm:intel_uc_fw_upload [i915]] HuC fw load i915/kbl_huc_ver02_00_1810.bin
<3> [229.656740] intel_uc_fw_upload:425 GEM_BUG_ON(intel_uc_fw_is_loaded(uc_fw))
as we performed only pure reset and didn't sanitized HuC fw status.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802184055.31988-3-michal.wajdeczko@intel.com
With i915 added to i915_inject_probe_failure we can use dedicated
printk when injecting artificial load failure.
Also make this function look like other i915 functions that return
error code and make it more flexible to return any provided error
code instead of previously assumed -ENODEV.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802184055.31988-2-michal.wajdeczko@intel.com
By placing our idle-barriers in the i915_active fence tree, we expose
those for reuse by other components that are issuing requests along the
kernel_context. Reusing the proto-barrier active_node is perfectly fine
as the new request implies a context-switch, and so an opportune point
to run the idle-barrier. However, the proto-barrier is not equivalent
to a normal active_node and care must be taken to avoid dereferencing the
ERR_PTR used as its request marker.
v2: Comment the more egregious cheek
v3: A glossary!
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: ce476c80b8 ("drm/i915: Keep contexts pinned until after the next kernel context switch")
Fixes: a9877da2d6 ("drm/i915/oa: Reconfigure contexts on the fly")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802100015.1281-1-chris@chris-wilson.co.uk
Currently, we only sample if the intel_gt is awake, but we acquire our
own runtime_pm wakeref. Since intel_gt has transitioned to tracking its
own wakeref, we can atomically test and acquire that wakeref instead.
v2: Take engine->wakeref for engine sampling
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801233616.23007-1-chris@chris-wilson.co.uk
As we already track GuC/HuC uses by other means than modparam
there is no point in sanitizing it. Just scan modparam for
major discrepancies between what was requested vs actual.
v2: rebased, reworded info messages
v3: oops
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801132840.33176-1-michal.wajdeczko@intel.com
Instead of relying on enable_guc modparam to represent actual
GuC submission mode, use dedicated flag and look at modparam
only to check if submission was explicitly disabled by the user.
v2: rebased, simplified condition (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731223321.36436-4-michal.wajdeczko@intel.com
We can use value of enable_guc modparam during firmware path selection
and start using firmware status to see if GuC/HuC is being used.
This is first step to make enable_guc modparam read-only.
v2: rebased, don't care about <0 (Chris)
v3: oops
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731223321.36436-3-michal.wajdeczko@intel.com
Rename intel_uc_is_using* into intel_uc_supports* to make clear
distinction from actual state (compare intel_uc_fw_is_running)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731223321.36436-2-michal.wajdeczko@intel.com
To be called from the top level runtime functions, to hide the
gt-specific bits (mainly related to intel_uc).
v2: rebased
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801005709.34092-3-daniele.ceraolospurio@intel.com
uC is a subcomponent of GT, so initialize/clean it as part of it. The
wopcm_init_early doesn't have to be happen before the uC one, but since
in other parts of the code we consider WOPCM first do the same for
consistency.
v2: s/cleanup_early/late_release to match the caller
v3: s/late_release/driver_late_release/ (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> #v1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801005709.34092-2-daniele.ceraolospurio@intel.com
We don't call the init_early function from within the gem code, so we
shouldn't do it for the cleanup either.
v2: while at it, s/gt_cleanup_early/gt_late_release (Chris)
v3: s/late_release/driver_late_release/ (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801005709.34092-1-daniele.ceraolospurio@intel.com
We only compute the lrc_descriptor() on pinning the context, i.e.
infrequently, so we do not benefit from storing the template as the
addressing mode is also fixed for the lifetime of the intel_context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730133035.1977-9-chris@chris-wilson.co.uk
Until Icelake, each engine had its own set of 64 MOCS registers. In
order to simplify, Tigerlake moves to only 64 Global MOCS registers,
which are no longer part of the engine context. Since these registers
are now global, they also only need to be initialized once.
>From Gen12 onwards, MOCS must specify the target cache (3:2) and LRU
management (5:4) fields and cannot be programmed to 'use the value from
Private PAT', because these fields are no longer part of the PPAT. Also
cacheability control (1:0) field has changed, 00 no longer means 'use
controls from page table', but uncacheable (UC).
v2 (Lucas):
- Move the changes to the fault registers to a separate commit - the
old ones overlap with the range used by the new global MOCS
(requested by Daniele)
v3 (Lucas):
- Clarify comment about setting the unused entries to the same value
of index 0, that is the invalid entry (requested by Daniele)
- Move changes to DONE_REG and ERROR_GEN6 to a separate commit
(requested by Daniele)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730180407.5993-5-lucas.demarchi@intel.com
The MOCS table is published as part of bspec, and versioned. Entries
are supposed to never be modified, but new ones can be added. Adding
entries increases table version. The patch includes version 1 entries.
Two of the 3 legacy entries used for gen9 are no longer expected to work.
Although we are changing the gen11 table, those changes are supposed to
be backward compatible since we are only touching previously undefined
entries.
v2: Add the missing entries in 49-51 range and replace "HW reserved"
terminology to what it actually is: L1 is implicitly enabled
(from Daniele)
v3: Use a different table for Tiger Lake since entries 0 and 1 are not
the same (from Daniele)
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730180407.5993-4-lucas.demarchi@intel.com
The fault registers moved to another offset. The old location is now
taken by the global MOCS registers, to be added in a follow up change.
Based on previous patches by Michel Thierry <michel.thierry@intel.com>.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730180407.5993-2-lucas.demarchi@intel.com
The register we write are not WOPCM regs but uC ones related to how
GuC and HuC are going to use the WOPCM, so it makes logical sense
for them to be programmed as part of uc_init_hw. The WOPCM map on the
other side is not uC-specific (although that is our main use-case), so
keep that separate.
v2: move write_and_verify to uncore, fix log, re-use err_out tag,
add intel_wopcm_guc_base, fix log
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730230743.19542-2-daniele.ceraolospurio@intel.com
When coming out of S3/S4 we sanitize and re-init the HW, which includes
enabling communication during uc_init_hw. We therefore don't want to do
that again in uc_resume and can just tell GuC to reload its state.
v2: split uc_resume and uc_runtime_resume to match the suspend
functions and to better differentiate the expected state in the 2
scenarios (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730230743.19542-1-daniele.ceraolospurio@intel.com
Teach igt_spinner to only use our internal structs, decoupling the
interface from the GEM contexts. This makes it easier to avoid
requiring ce->gem_context back references for kernel_context that may
have them in future.
v2: Lift engine lock to verify_wa() caller.
v3: Less than v2, but more so
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731081126.9139-1-chris@chris-wilson.co.uk
Track the currently bound address space used by the HW context. Minor
conversions to use the local intel_context.vm are made, leaving behind
some more surgery required to make intel_context the primary through the
selftests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730143209.4549-2-chris@chris-wilson.co.uk
We only use the init_context vfunc once while recording the default
context state, and we use the same sequence in each backend (eliding
steps that do not apply). Remove the vfunc for simplicity and
de-duplication.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729113720.24830-1-chris@chris-wilson.co.uk
Throw out our local hacks of header tests now that the more generic
kbuild versions are upstream.
At least for now, continue to keep the header tests behind
CONFIG_DRM_I915_WERROR=y knob.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729140847.18557-1-jani.nikula@intel.com
HuC is usually not a critical component, so we can safely ignore
firmware load or authentication failures unless HuC was explicitly
requested by the user.
v2: add convenient way to disable loading (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729112612.37476-1-michal.wajdeczko@intel.com
Smatch spotted that we test at the start of hang_fini for a valid (h->gt
is only set after a request is created) but then used it regardless
later on.
v2: Alternatively, we do not need to check as we now always prime h->gt
in hang_init()
References: cb823ed991 ("drm/i915/gt: Use intel_gt as the primary object for handling resets")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729085944.2179-1-chris@chris-wilson.co.uk
drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:194: warning: Function parameter or member 'i915' not described in 'intel_uc_fw_fetch'
drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:194: warning: Excess function parameter 'dev_priv' description in 'intel_uc_fw_fetch'
Fixes: 97dee74bb3 ("drm/i915/uc: Reorder params in intel_uc_fw_fetch")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190727101055.5300-1-chris@chris-wilson.co.uk
According to Firmware layout definition, RSA signature is located
after CSS header and uCode so actual RSA offset in the blob can be
easily calculated when needed (and we need it only once).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726184212.1836-3-michal.wajdeczko@intel.com
According to Firmware layout definition, uCode is located right
after CSS header, so ucode offset is always same as header size.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726184212.1836-2-michal.wajdeczko@intel.com
According to Firmware layout definition, CSS header is located
in front of the firmware blob, so header offset is always 0.
Similarly, size of the CSS header is constant and currently
used version is exactly 128.
While here, move type/status enums up and keep them together.
v2: use sizeof consistently (Daniele), update commit message
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726184212.1836-1-michal.wajdeczko@intel.com
Modifying a remote context requires careful serialisation with requests
on that context, and that serialisation requires us to take their
timeline->mutex. Make it so.
Note that while struct_mutex rules, we can't create more than one
request in parallel, but that age is soon coming to an end.
v2: Though it doesn't affect the current users, contexts may share
timelines so check if we already hold the right mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725131447.27515-1-chris@chris-wilson.co.uk
We are already storing runtime value of log level in private
field, so there is no need to modify modparam.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725205106.36148-1-michal.wajdeczko@intel.com
guc->stage_desc_pool is required as part of the init parameters and
there is no reason we have to init them after HuC. This fixes a NULL
ptr dereference due to guc->stage_desc_pool not being set (no fixes
tag since GuC submission can't be enabled yet).
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725174655.24382-1-daniele.ceraolospurio@intel.com
All intel_uc_fw_* functions are taking uc_fw as first param
except intel_uc_fw_fetch() which is taking i915. Fix that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725210314.21188-1-michal.wajdeczko@intel.com
Generic uc firmware layout definitions are unlikely to change and
are separate to other GuC specific definitions.
v2: reordered
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725141308.24660-3-michal.wajdeczko@intel.com
Sphinx was rendering firmware layout as html table, but since
we want to add sizes relations switch to plain text graphics.
v2: also update text and do it before move (Daniele)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725141308.24660-2-michal.wajdeczko@intel.com
The way we load the firmwares is the same for both GuC and HuC, the only
difference is in the wopcm destination address and the dma flags, so we
easily can move the logic to a common function and pass in offset and
flags. The only other difference in the uplaod path are some the extra
steps that guc does before and after the xfer, but those don't require
the guc fw to be pinned in ggtt and can safely be performed before
calling the uc_upload function.
Note that this patch re-introduces the dma xfer wait for guc loading that
was removed with "drm/i915/guc: Propagate the fw xfer timeout". This is
not going to slow us down on a successful load (the dma has to complete
before fw init can start), but could slightly increase the timeout in case
of a fw init error.
v2: use _fw variants for uncore accesses (Chris), fix guc_fw status on
failed wait.
v3: use dev_err and print DMA_CTRL (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-9-daniele.ceraolospurio@intel.com
The gt is our new central structure for uc-related code, so we can use
that instead of jumping back to i915 via the fw object. Since we have it
in the upload function it is easy to pass it through the lower levels of
the xfer process instead of continuosly jumping via uc_fw->uc->gt, which
will also make things a bit cleaner for the next patch.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-8-daniele.ceraolospurio@intel.com
The binary is perma-pinned and the rsa is not going to change, so copy
it only once and not on every load.
v2: onion unwind (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-7-daniele.ceraolospurio@intel.com
The way we copy the RSA is the same for GuC and HuC, so we can move the
logic in a common function. this will also make any update needed for
local memory easier.
v2: return the number of copied bytes and check it (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-6-daniele.ceraolospurio@intel.com
We currently track fetch and load status separately, but the 2 are
actually sequential in the uc lifetime (fetch must complete before we
can attempt the load!). Unifying the 2 variables we can better follow
the sequential states and improve our trackng of the uC state.
Also, sprinkle some GEM_BUG_ON to make sure we transition correctly
between states.
v2: rename states, add the running state (Michal), drop some logs in
the fetch path (Michal, Chris)
v3: re-rename states, extend early status check to all helpers (Michal)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-5-daniele.ceraolospurio@intel.com
Instead of having 2 identical functions for GuC and HuC firmware
selection, we can unify the selection logic and just use different lists
based on FW type.
Note that the revid is not relevant for current blobs, but the upcoming
CML will be identified as CFL rev 5, so by considering the revid we're
ready for that.
v2: rework blob list defs (Michal), add order check (Chris), fuse GuC
and HuC lists into one.
v3: remove difference between no uC HW and no uC FW, simplify related
selection code, check the whole fw list (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v2
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-4-daniele.ceraolospurio@intel.com
There are 2 issues around handling of missing uC support:
- We treat lack of uC HW and lack of uC FW definition as 2 different
cases, but both of them mean that we don't support the uC on the
platform we're running on.
- We rely on the modparam to decide if we can take uC paths or not, but
we don't sanitize it if it is set incorrectly on platform with no uC
support.
To fix both of them, unify the 2 cases in a single one and sanitize the
modparam on invalid configuration (after printing an error message).
The log has been adapted as well, since the user doesn't care why we
don't support GuC/HuC (no HW or no FW), just that we do not. Developers
can easily find the answer based on the platform, so we can simplify the
log.
Correcting the modparam has been preferred over failing the load since
this is what we usually do for non-supported feature (e.g. the now gone
enable_ppgtt would fall back to the highest supported PPGTT mode if the
selected one was not available).
Note that this patch purposely doesn't change the behavior for platforms
that do have uC support, in which case we will still fail if enable_guc
is set and the firmware is not available on the system.
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-3-daniele.ceraolospurio@intel.com
We have several HAS_* checks for GuC and HuC but we mostly use HAS_GUC
and HAS_HUC, with only 1 exception. Since our HW always has either
both uC or neither of them, just replace all the checks with a unified
HAS_UC.
v2: use HAS_GT_UC (Michal)
v3: fix comment (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-2-daniele.ceraolospurio@intel.com
All the GuC objects are perma-pinned, so their offset can't change at
runtime. We can therefore set (and log!) the parameters only once during
boot.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724085849.18047-1-chris@chris-wilson.co.uk
Fix botched refactoring of the code that uncorrectly split a check on a
bool, treating it as a u32.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 84b1ca2f0e ("drm/i915/uc: prefer intel_gt over i915 in GuC/HuC paths")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723153733.19401-1-daniele.ceraolospurio@intel.com
The microcontrollers are part of GT so it makes logical sense to have
them sanitized at the same time. This also fixed an issue with our
status tracking where the FW load status is not reset around
hibernation.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723091404.6449-2-chris@chris-wilson.co.uk
This was the last place in gt/uc that was still using I915_READ
with the global dev_priv.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723091404.6449-1-chris@chris-wilson.co.uk
Prior to freeing the struct, call the fini function to cleanup the
common members. Currently this only calls the debug functions to mark
the structs as destroyed, but may be extended to real work in future.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718070024.21781-2-chris@chris-wilson.co.uk
Access to 0xb100 - 0xb3ff mmio range is controlled by the MCR selector
which only affects CPU MMIO. Therefore these registers cannot be realiably
read with MI_SRM from the command streamer so skip their verification.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-5-tvrtko.ursulin@linux.intel.com
A couple issues were present in this code:
1.
fls() usage was incorrect causing off by one in subslice mask lookup,
which in other words means subslice mask of all zeroes is always used
(subslice mask of a slice which is not present, or even out of bounds
array access), rendering the checks in wa_init_mcr either futile or
random.
2.
Condition in WARN_ON was not correct. It is doing a bitwise and operation
between a positive (present subslices) and negative mask (disabled L3
banks).
This means that with corrected fls() usage the assert would always
incorrectly fail.
We could fix this by inverting the fuse bits in the check, but instead do
one better and improve the code so it not only asserts, but finds the
first common index between the two masks and only warns if no such index
can be found.
v2:
* Simplify check for logic and redability.
* Improve commentary explaining what is really happening ie. what the
assert is really trying to check and why.
v3:
* Find first common index instead of just asserting.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: fe864b76c2 ("drm/i915: Implement WaProgramMgsrForL3BankSpecificMmioReads")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v1
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-4-tvrtko.ursulin@linux.intel.com
Instead of re-calculating the MCR selector in read_subslice_reg do the
rwm on its existing value and restore it when done.
This consolidates MCR programming to one place for cnl+, and avoids
re-calculating its default value on older platforms during hangcheck.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-3-tvrtko.ursulin@linux.intel.com
fls returns bit positions starting from one for the lsb and the MCR
register expects zero based (sub)slice addressing.
Incorrent MCR programming can have the effect of directing MMIO reads of
registers in the 0xb100-0xb3ff range to invalid subslice returning zeroes
instead of actual content.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1e40d4aea5 ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-2-tvrtko.ursulin@linux.intel.com
As we unwind the requests for a preemption event, we return a virtual
request back to its original virtual engine (so that it is available for
execution on any of its siblings). In the process, this means that its
breadcrumb should no longer be associated with the original physical
engine, and so we are forced to decouple it. Previously, as the request
could not complete without our awareness, we would move it to the next
real engine without any danger. However, preempt-to-busy allowed for
requests to continue on the HW and complete in the background as we
unwound, which meant that we could end up retiring the request before
fixing up the breadcrumb link.
[51679.517943] INFO: trying to register non-static key.
[51679.517956] the code is fine but needs lockdep annotation.
[51679.517960] turning off the locking correctness validator.
[51679.517966] CPU: 0 PID: 3270 Comm: kworker/u8:0 Tainted: G U 5.2.0+ #717
[51679.517971] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[51679.518012] Workqueue: i915 retire_work_handler [i915]
[51679.518017] Call Trace:
[51679.518026] dump_stack+0x67/0x90
[51679.518031] register_lock_class+0x52c/0x540
[51679.518038] ? find_held_lock+0x2d/0x90
[51679.518042] __lock_acquire+0x68/0x1800
[51679.518047] ? find_held_lock+0x2d/0x90
[51679.518073] ? __i915_sw_fence_complete+0xff/0x1c0 [i915]
[51679.518079] lock_acquire+0x90/0x170
[51679.518105] ? i915_request_cancel_breadcrumb+0x29/0x160 [i915]
[51679.518112] _raw_spin_lock+0x27/0x40
[51679.518138] ? i915_request_cancel_breadcrumb+0x29/0x160 [i915]
[51679.518165] i915_request_cancel_breadcrumb+0x29/0x160 [i915]
[51679.518199] i915_request_retire+0x43f/0x530 [i915]
[51679.518232] retire_requests+0x4d/0x60 [i915]
[51679.518263] i915_retire_requests+0xdf/0x1f0 [i915]
[51679.518294] retire_work_handler+0x4c/0x60 [i915]
[51679.518301] process_one_work+0x22c/0x5c0
[51679.518307] worker_thread+0x37/0x390
[51679.518311] ? process_one_work+0x5c0/0x5c0
[51679.518316] kthread+0x116/0x130
[51679.518320] ? kthread_create_on_node+0x40/0x40
[51679.518325] ret_from_fork+0x24/0x30
[51679.520177] ------------[ cut here ]------------
[51679.520189] list_del corruption, ffff88883675e2f0->next is LIST_POISON1 (dead000000000100)
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716124931.5870-4-chris@chris-wilson.co.uk
Push the engine stop into the back reset_prepare (where it already was!)
This allows us to avoid dangerously setting the RING registers to 0 for
logical contexts. If we clear the register on a live context, those
invalid register values are recorded in the logical context state and
replayed (with hilarious results).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716124931.5870-2-chris@chris-wilson.co.uk
By stopping the rings, we may trigger an arbitration point resulting in
a premature context-switch (i.e. a completion event before the request
is actually complete). This clears the active context before the reset,
but we must remember to rewind the incomplete context for replay upon
resume.
Fixes: 1863e3020a ("drm/i915/execlists: Always reset the context's RING registers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716124931.5870-3-chris@chris-wilson.co.uk
Avoid a global idle barrier by reconfiguring each context by rewriting
them with MI_STORE_DWORD from the kernel context.
v2: We only need to determine the desired register values once, they are
the same for all contexts.
v3: Don't remove the kernel context from the list of known GEM contexts;
the world is not ready for that yet.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716213443.9874-1-chris@chris-wilson.co.uk
Preempt-to-busy uses a GPU semaphore to enforce an idle-barrier across
preemption, but mediated gvt does not fully support semaphores.
v2: Fiddle around with the flags and settle on using has-semaphores for
the core bits so that we retain the ability to preempt our own
semaphores.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Xiaolin Zhang <xiaolin.zhang@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709091233.8573-1-chris@chris-wilson.co.uk
We cannot let the request be retired and freed while we are trying to
dump it during error capture. It is not sufficient just to grab a
reference to the request, as during retirement we may free the ring
which we are also dumping. So take the engine lock to prevent retiring
and freeing of the request.
Reported-by: Alex Shumsky <alexthreed@gmail.com>
Fixes: 83c317832e ("drm/i915: Dump the ringbuffer of the active request for debugging")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Alex Shumsky <alexthreed@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190715080946.15593-6-chris@chris-wilson.co.uk
GVT forces single port submission of individual requests. We do not
enjoy the context amalgamation that the test depends upon for setting up
the test (where port 0 has a large number of requests with a priority
change somewhere in the middle). Under single request submission of gvt
it is quite able for the preemption event to occur while another context
is active and so there be a real need to act upon that preemption.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111108
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712082549.25053-1-chris@chris-wilson.co.uk
Get rid of them to avoid more users being added while the guc code
transitions to use gt more than i915.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-11-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We can get rid of a few more guc_to_i915 and start compartmentalizing
interrupt management a bit more. We should be able to move more code in
the future once the gt_pm code is also moved across to gt.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-10-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
With our HW interface logic moving from i915 to gt and with GuC and HuC
being part of the gt HW, it makes sense to use the intel_gt structure
instead of i915 as our reference object in GuC/HuC paths.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-9-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
All the intel_uc_* can now be moved to work on the intel_uc structure
for better encapsulation of uc-related actions.
Note: I've introduced uc_to_gt instead of uc_to_i915 because the aim is
to move everything to be gt-focused in the medium term, so we would've
had to replace it soon anyway.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-8-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Being part of the GT HW, it make sense to keep the guc/huc structures
inside the GT structure. To help with the encapsulation work done by the
following patches, both structures are placed inside a new intel_uc
container. Although this results in code with ugly nested dereferences
(i915->gt.uc.guc...), it saves us the extra work required in moving
the structures twice (i915 -> gt -> uc). The following patches will
reduce the number of places where we try to access the guc/huc
structures directly from i915 and reduce the ugliness.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-7-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Both microcontrollers are part of the GT HW and are closely related to
GT operations. To keep all the files cleanly together, they've been
placed in their own subdir inside the gt/ folder
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-6-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Having taken the first step in encapsulating the functionality by moving
the related files under gt/, the next step is to start encapsulating by
passing around the relevant structs rather than the global
drm_i915_private. In this step, we pass intel_gt to intel_reset.c
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712192953.9187-1-chris@chris-wilson.co.uk
Use the "_probe" nomenclature not only in i915_driver_probe() helper
name but also in other related function / variable names for
consistency. Only the userspace exposed name of a related module
parameter is left untouched.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-4-janusz.krzysztofik@linux.intel.com
There is a debug message in the workaround initialisation path that
reports how many entries were added of each type. However, whitelist
workarounds exist for multiple engines but the type name is just
'whitelist'. Tvrtko suggested adding the engine name to make the
message more useful.
v2: Updated the similar message in the workaround reset selftest.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
CC: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712070745.35239-4-John.C.Harrison@Intel.com
Newer hardware supports extra feature in the whitelist registers. This
patch updates the selftest to test that entries marked as read only
are actually read only.
v2: Removed all use of 'rsvd' for read-only registers to avoid
ambiguous code or error messages.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
CC: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712070745.35239-3-John.C.Harrison@Intel.com
As per review feedback by Tvrtko, added a check that no invalid bits
are being set in the whitelist flags fields.
Also updated the read/write access definitions to make it clearer that
they are an enum field not a set of single bit flags.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
CC: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712070745.35239-2-John.C.Harrison@Intel.com
Preemption via GuC submission is not being supported with its current
legacy incarnation. The current FW does support a similar pre-emption
flow via H2G, but it is class-based instead of being instance-based,
which doesn't fit well with the i915 tracking. To fix this, the
firmware is being updated to better support our needs with a new flow,
so we can safely remove the old code.
v2 (Daniele): resurrect & rebase, reword commit message, remove
preempt_context as well
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710005437.3496-2-daniele.ceraolospurio@intel.com
Specify that we do want a 64b value for sizeof(u32) as we want to
compute the mask of the upper 62bits.
v2: Use round_down() for automatic type promotion
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710161413.7115-1-chris@chris-wilson.co.uk
Put back the preemption counters lost in commit 22b7a426bb
("drm/i915/execlists: Preempt-to-busy") so that our selftests that
assert no preemption took place continue to function.
v2: But a timeslice is only a "soft" preemption!
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710064454.682-1-chris@chris-wilson.co.uk
We want to set this flag in the next commit on requests containing
perf queries so that the result of the perf query can just be a delta
of global counters, rather than doing post processing of the OA
buffer.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[ickle: add basic selftest for nopreempt]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709164227.25859-1-chris@chris-wilson.co.uk
We have a bunch of offsets in the scratch buffer. As we're about to
add some more, let's group all of the offsets in a common location.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709123351.5645-6-lionel.g.landwerlin@intel.com
We now track features correctly instead of probing i915->engine[RCS0]
which is much more flexible and avoids any nasty surprises.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705124325.14270-2-chris@chris-wilson.co.uk
PM interrupts belong to the GT so move the variables to be inside
struct intel_gt.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Co-developed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704121756.27824-3-tvrtko.ursulin@linux.intel.com
It seems intel_engine_get_instdone is able to get instdone for all engines
but intel_hangcheck.c/subunits_stuck decides to ignore it for non render.
We can just drop the check in subunits_stuck since the checks on
unavailable fields will always return stuck, which when bitwise and with
the potential unstuck instdone is harmless.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703144116.15593-1-tvrtko.ursulin@linux.intel.com
We need to setup the workarounds on all engines, with the knowledge
about which platforms each workaround applies to kept together in the
workaround list. As such, we can pull the w/a initialisation into the
common setup and try to avoid duplicating knowledge about when to setup
the workarounds.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703135805.7310-2-chris@chris-wilson.co.uk
Expose whether or not we support the PMU software tracking in our
scheduler capabilities, so userspace can query at runtime.
v2: Use I915_SCHEDULER_CAP_ENGINE_BUSY_STATS for a less ambiguous
capability name.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703143702.11339-1-chris@chris-wilson.co.uk
We don't care about the result of the read, so it may be garbage, we
only care that the mmio is flushed. As such, we can forgo using an
individual forcewake and lock around any posting-read for an engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703155225.9501-4-chris@chris-wilson.co.uk
We can assume the caller is holding a blanket forcewake for the
register writes during resume, and so we can skip taking individual
locks around each write inside execlists resume.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703155225.9501-3-chris@chris-wilson.co.uk
During post-reset resume, we call intel_mocs_init_engine to reinitialise
the MOCS registers. Suprisingly, especially when enhanced by lockdep,
the acquisition of the forcewake lock around each register write takes a
substantial portion of the reset time. We don't need to use the
individual forcewake here as we can assume that the caller is holding a
blanket forcewake for the reset&resume and the resume is serialised.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703155225.9501-2-chris@chris-wilson.co.uk
The render state is used to initialise the default RCS context, and only
used during early setup from within the gt code. As such, it makes a
good candidate for placing within gt/, even if it is not yet entirely
clean of our GEM heritage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704091925.7391-1-chris@chris-wilson.co.uk
Be a little more hesitant before injecting a timeslice, and try to take
into account any change in priority that is due for the running task
before switching to another task. This will allow us to arbitrarily
prevent switching away from a request if we deem it necessarily to
disable preemption, for instance.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-9-chris@chris-wilson.co.uk
We frequently, but not frequently enough!, remember to flush residual
operations and objects at the end of a live subtest. The purpose is to
cleanup after every subtest, leaving a clean slate for the next subtest,
and perform early detection of leaky state. As this should ideally be
common for all live subtests, pull the task into a common teardown
routine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-1-chris@chris-wilson.co.uk
When eliminating our use of drm_irq_install() I failed to convert
all our synchronize_irq() calls to consult pdev->irq instead of
dev_priv->drm.irq. As we no longer populate dev_priv->drm.irq
we're no longer synchronizing against anything.
v2: Add intel_syncrhonize_irq() (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Imre Deak <imre.deak@intel.com>
Fixes: b318b82455 ("drm/i915: Nuke drm_driver irq vfuncs")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111012
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702151723.29739-1-ville.syrjala@linux.intel.com
The same tests failing on CFL+ platforms are also failing on ICL.
Documentation doesn't list the
WaAllowPMDepthAndInvocationCountAccessFromUMD workaround for ICL but
applying it fixes the same tests as CFL.
v2: Use only one whitelist entry (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628120720.21682-4-lionel.g.landwerlin@intel.com
CFL:C0+ changed the status of those registers which are now
blacklisted by default.
This is breaking a number of CTS tests on GL & Vulkan :
KHR-GL45.pipeline_statistics_query_tests_ARB.functional_fragment_shader_invocations (GL)
dEQP-VK.query_pool.statistics_query.fragment_shader_invocations.* (Vulkan)
v2: Only use one whitelist entry (Lionel)
Bspec: 14091
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: stable@vger.kernel.org
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628120720.21682-3-lionel.g.landwerlin@intel.com
When a register is readonly there is not much we can tell about its
value (apart from its default value?). This can be covered by tests
exercising the value of the register from userspace.
For PS_INVOCATION_COUNT we've got the following piglit tests :
KHR-GL45.pipeline_statistics_query_tests_ARB.functional_fragment_shader_invocations
Vulkan CTS tests :
dEQP-VK.query_pool.statistics_query.fragment_shader_invocations.*
v2: Use a local to shrink under 80cols.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 86554f48e5 ("drm/i915/selftests: Verify whitelist of context registers")
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190629131350.31185-1-chris@chris-wilson.co.uk
Daniele pointed out that the CSB status information will change with
Tigerlake and suggested that we could rearrange our state machine to
hide the differences in generation. gcc also prefers the explicit state
machine, so make it so:
process_csb 1980 1967 -13
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190701100502.15639-4-chris@chris-wilson.co.uk
With the subdirectories we lost the ability to build individual files on
the command line, for example:
$ make drivers/gpu/drm/i915/display/intel_display.o
This was due to the top level directory missing from header search
path. Add the header search paths to subdir Makefiles.
Note that none of the other options in the top level i915 Makefile are
taken into account when building individual files. Usually this is not a
concern.
Reported-by: Imre Deak <imre.deak@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626143618.21800-2-jani.nikula@intel.com
Since the reset path wants to recover the engines itself, it only wants
to reinitialise the hardware using i915_gem_init_hw(). Pull the call to
intel_engines_resume() to the module init/resume path so we can avoid it
during reset.
Fixes: 79ffac8599 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-3-chris@chris-wilson.co.uk
If we issue a reset to a currently idle engine, leave it idle
afterwards. This is useful to excise a linkage between reset and the
shrinker. When waking the engine, we need to pin the default context
image which we use for overwriting a guilty context -- if the engine is
idle we do not need this pinned image! However, this pinning means that
waking the engine acquires the FS_RECLAIM, and so may trigger the
shrinker. The shrinker itself may need to wait upon the GPU to unbind
and object and so may require services of reset; ergo we should avoid
the engine wake up path.
The danger in skipping the recovery for idle engines is that we leave the
engine with no context defined, which may interfere with the operation of
the power context on some older platforms. In practice, we should only
be resetting an active GPU but it something to look out for on Ironlake
(if memory serves).
Fixes: 79ffac8599 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-2-chris@chris-wilson.co.uk
For use in the next patch, we want to acquire a wakeref without having
to wake the device up -- i.e. only acquire the engine wakeref if the
engine is already active.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-1-chris@chris-wilson.co.uk
We require that the intel_gpu_reset() was atomic, not the whole of
i915_reset() which is guarded by a mutex. However, we do require that
i915_reset_engine() is atomic for use from within the submission tasklet.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626134433.6318-3-chris@chris-wilson.co.uk
We no longer need to manually acquire a wakeref for request emission, so
drop the redundant wakerefs, letting us test our wakeref handling more
precisely.
References: 79ffac8599 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626134433.6318-2-chris@chris-wilson.co.uk
In order for the reset count to be accurate across our selftest, we need
to prevent the background retire worker from modifying our expected
state. To preserve the intent of symmetry, we apply this to both
i915_reset and i915_reset_engine, even though it strictly only affects
i915_reset_engine currently.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626134433.6318-1-chris@chris-wilson.co.uk
We no longer allocate a contiguous set of timeline ids for all engines
upon creation, so we no longer should assume that the timelines are
densely allocated within a context. Hopefully, the set of fences used
within a workload are still dense enough for us to take advantage of
the compressed radix tree used for the syncmap.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625233349.32371-1-chris@chris-wilson.co.uk
As this engine owns the lock around rq->sched.link (for those waiters
submitted to this engine), we can use that link as an element in a local
list. We can thus replace the recursive algorithm with an iterative walk
over the ordered list of waiters.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625130128.11009-1-chris@chris-wilson.co.uk
The Demand Prefetch workaround (binding table prefetching) only applies
to Icelake A0/B0. But the Sampler Prefetch workaround needs to be
applied to all Gen11 steppings, according to a programming note in the
SARCHKMD documentation.
Using the Intel Gallium driver, I have seen intermittent failures in
the dEQP-GLES31.functional.copy_image.non_compressed.* tests. After
applying this workaround, the tests reliably pass.
v2: Remove the overlap with a pre-production w/a
BSpec: 9663
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625090655.19220-1-chris@chris-wilson.co.uk
In the unlikely case (thank you CI!), we may find ourselves wanting to
issue a preemption but having no runnable requests left. In this case,
we set the semaphore before computing the preemption and so must unset
it before forgetting (or else we leave the machine busywaiting until the
next request comes along and so likely hang).
v2: Replace readback with only a wmb after asserting the semaphore
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190624092009.30189-1-chris@chris-wilson.co.uk
If we introduce a callback for i915_active that is only called the first
time we use the i915_active and is symmetrically paired with the
i915_active.retire callback, we can replace the open-coded and
non-atomic implementations -- which will be very fragile (i.e. broken)
upon removing the struct_mutex serialisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621183801.23252-4-chris@chris-wilson.co.uk
Remove the accumulated optimisations that we have for i915_vma_retire
and reduce it to the bare essential of tracking the active object
reference. This allows us to only use atomic operations, and so will be
able to avoid the struct_mutex requirement.
The principal loss here is the shrinker MRU bumping, so now if we have
to shrink, we will do so in much more random order and more likely to
try and shrink recently used objects. That is a nuisance, but shrinking
active objects is a second step we try to avoid and will always be a
system-wide performance issue.
The other loss is here is in the automatic pruning of the
reservation_object when idling. This is not as large an issue as upon
reservation_object introduction as now adding new fences into the object
replaces already signaled fences, keeping the array compact. But we do
lose the auto-expiration of stale fences and unused arrays. That may be
a noticeable problem for which we need to re-implement autopruning.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621183801.23252-3-chris@chris-wilson.co.uk
i915_gem_wait_for_idle() and i915_retire_requests() introduce a
dependency on the timeline->mutex. This is problematic as we want to
later perform allocations underneath i915_active.mutex, forming a link
between the shrinker, the timeline and active mutexes. Nip this cycle in
the bud by removing the acquisition of the timeline mutex (i.e.
retiring) from inside the shrinker.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621183801.23252-1-chris@chris-wilson.co.uk
drivers/gpu/drm/i915/gt/intel_mocs.c:513: warning: Function parameter or member 'gt' not described in 'intel_mocs_init_l3cc_table'
drivers/gpu/drm/i915/gt/intel_mocs.c:513: warning: Excess function parameter 'dev_priv' description in 'intel_mocs_init_l3cc_table'
intel_vgt_balloon/deballoon, i915_ggtt_probe_hw intel_wopcm_init_hw need
similar treatment
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621131640.28864-2-chris@chris-wilson.co.uk
Since the anonymous i915_gt became struct intel_gt and encloses
struct i915_gt_timelines, rename i915_gt_timelines to intel_gt_timelines
to match its parentage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621131640.28864-1-chris@chris-wilson.co.uk
Scratch vma lives under gt but the API used to work on i915. Make this
consistent by renaming the function to intel_gt_scratch_offset and make
it take struct intel_gt.
v2:
* Move to intel_gt. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-33-tvrtko.ursulin@linux.intel.com
Our timelines are stored inside intel_gt so we can convert the interface
to take exactly that and not i915.
At the same time re-order the params to our more typical layout and
replace the backpointer to the new containing structure.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-31-tvrtko.ursulin@linux.intel.com
For gt related operations it makes more logical sense to stay in the realm
of gt instead of dereferencing via driver i915.
This patch handles a few of the easy ones with work requiring more
refactoring still outstanding.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-30-tvrtko.ursulin@linux.intel.com
This will become useful in the following patch.
v2:
* Assign the pointer through a helper on the top level to work around
the layering violation. (Chris)
v3:
* Handle selftests.
v4:
* Move call to intel_gt_init_hw into mock_init_ggtt. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-28-tvrtko.ursulin@linux.intel.com
Having introduced struct intel_gt (named the anonymous structure in i915)
we can start using it to compartmentalize our code better. It makes more
sense logically to have the code internally like this and it will also
help with future split between gt and display in i915.
v2:
* Keep ggtt flush before fb obj flush. (Chris)
v3:
* Fix refactoring fail.
* Always flush ggtt writes. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-23-tvrtko.ursulin@linux.intel.com
As it will grow in a following patch make a new home for it.
v2:
* Convert mock_gem_device as well. (Chris)
v3:
* Rename to intel_gt_init_early and move call site to i915_drv.c. (Chris)
v4:
* Adjust SPDX tags.
* No need to gt/ path when including intel_gt_types.h. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-3-tvrtko.ursulin@linux.intel.com
We have long been slighlty annoyed by the anonymous i915->gt.
Promote it to a separate structure and give it its own header.
This is a first step towards cleaning up the separation between
i915 and gt.
v2:
* Adjust SPDX header.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-2-tvrtko.ursulin@linux.intel.com
The call to kick_siblings() dereferences the rq->context, so we should
not drop our local reference until afterwards!
v2: Stick to setting ce.inflight=NULL before kicking as this is what the
other threads will check to see if the context is ready for takeover.
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621080729.2652-1-chris@chris-wilson.co.uk
- HDR support (Uma, Ville)
- Add I2C symlink under HDMI connector similar to DP (Oleg)
- Add ICL multi-segmented gamma support (Shashank, Uma)
- Update register whitelist support for new hardware (Robert, John)
- GuC firmware update with updated ABI interface (Michal, Oscar)
- Add support for new DMC header versions (Lucas)
- In-kernel blitter client for selftest use (Matthew)
- Add Mule Creec Canyon (MCC) PCH support to go with EHL (Matt)
- EHL platform feature updates (Matt)
- Use Command Transport Buffers with GuC on all gens (Daniele)
- New i915.force_probe module parameter to replace i915.alpha_support (Jani)
Refactoring:
- Better runtime PM code abstraction/encapsulation (Daniele)
- VBT parsing cleanup and improvements (Jani)
- Move display code to its own subdirectory (Jani)
- Header cleanup (Jani, Daniele)
- Prep work for subsclice mask expansion (Stuart)
- Use uncore mmio register accessors more, remove unused macro wrappers (Tvrtko)
- Remove unused atomic property get/set stubs (Maarten)
- GTT cleanups and improvements (Mika)
- Pass intel_ types instead of drm_ types in plenty of display code (Ville)
- Engine reset, hangcheck, fault code cleanups and improvements (Tvrtko)
- Consider AML variants simply as either KBL or CFL ULX (Ville)
- State checker cleanups and improvements (Ville)
- GEM code reorganization to more files under gem subdirectory (Chris)
- Reducing dependency on a coarse struct_mutex (Chris)
Fixes:
- Fix use of uninitialized/incorrect error pointers (Colin, Dan)
- Fix DSI fastboot on some VLV/CHV platforms (Hans)
- Fix DSI error path (Hans)
- Add ICL port A combo PHY HW state check (Imre)
- Fix ICL AUX-B HW not done issue (Imre)
- Fix perf whitelist on gen10+ (Lionel)
- Fix PSR exit by forcing manual exit on older gens (José)
- Match voltage ranges instead of exact values (Lucas)
- Fix SDVO HDMI audio, with cleanups (Ville)
- Fix plane state dumps (Ville)
- Fix driver cleanup code to support driver hot unbind (Janusz)
- Add checks for ICL memory bandwidth requirements (Ville)
- Fix toggling between no C8 planes vs. at least one C8 plane (Ville)
- Improved checks on PLL usage conditions, refactoring (Ville)
- Avoid clobbering M/N values in fastset fuzzy checks (Ville)
- Take a runtime pm wakeref for atomic commits (Chris)
- Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too quickly (Chris)
- Avoid refcount_inc on known zero count to avoid debug flagging (Chris)
-----BEGIN PGP SIGNATURE-----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=hS8b
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-06-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Features:
- HDR support (Uma, Ville)
- Add I2C symlink under HDMI connector similar to DP (Oleg)
- Add ICL multi-segmented gamma support (Shashank, Uma)
- Update register whitelist support for new hardware (Robert, John)
- GuC firmware update with updated ABI interface (Michal, Oscar)
- Add support for new DMC header versions (Lucas)
- In-kernel blitter client for selftest use (Matthew)
- Add Mule Creec Canyon (MCC) PCH support to go with EHL (Matt)
- EHL platform feature updates (Matt)
- Use Command Transport Buffers with GuC on all gens (Daniele)
- New i915.force_probe module parameter to replace i915.alpha_support (Jani)
Refactoring:
- Better runtime PM code abstraction/encapsulation (Daniele)
- VBT parsing cleanup and improvements (Jani)
- Move display code to its own subdirectory (Jani)
- Header cleanup (Jani, Daniele)
- Prep work for subsclice mask expansion (Stuart)
- Use uncore mmio register accessors more, remove unused macro wrappers (Tvrtko)
- Remove unused atomic property get/set stubs (Maarten)
- GTT cleanups and improvements (Mika)
- Pass intel_ types instead of drm_ types in plenty of display code (Ville)
- Engine reset, hangcheck, fault code cleanups and improvements (Tvrtko)
- Consider AML variants simply as either KBL or CFL ULX (Ville)
- State checker cleanups and improvements (Ville)
- GEM code reorganization to more files under gem subdirectory (Chris)
- Reducing dependency on a coarse struct_mutex (Chris)
Fixes:
- Fix use of uninitialized/incorrect error pointers (Colin, Dan)
- Fix DSI fastboot on some VLV/CHV platforms (Hans)
- Fix DSI error path (Hans)
- Add ICL port A combo PHY HW state check (Imre)
- Fix ICL AUX-B HW not done issue (Imre)
- Fix perf whitelist on gen10+ (Lionel)
- Fix PSR exit by forcing manual exit on older gens (José)
- Match voltage ranges instead of exact values (Lucas)
- Fix SDVO HDMI audio, with cleanups (Ville)
- Fix plane state dumps (Ville)
- Fix driver cleanup code to support driver hot unbind (Janusz)
- Add checks for ICL memory bandwidth requirements (Ville)
- Fix toggling between no C8 planes vs. at least one C8 plane (Ville)
- Improved checks on PLL usage conditions, refactoring (Ville)
- Avoid clobbering M/N values in fastset fuzzy checks (Ville)
- Take a runtime pm wakeref for atomic commits (Chris)
- Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too quickly (Chris)
- Avoid refcount_inc on known zero count to avoid debug flagging (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v9x1lpdh.fsf@intel.com
Our intel_rings are always flushed as they are continually used to submit
commands to the GPU, and so do not need to be flushed on unpinning. This
avoids pulling in the flush_ggtt_writes locking into our context
unpin, which we want to allow from atomic context (for simplicity).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619203504.4220-1-chris@chris-wilson.co.uk
If we have multiple contexts of equal priority pending execution,
activate a timer to demote the currently executing context in favour of
the next in the queue when that timeslice expires. This enforces
fairness between contexts (so long as they allow preemption -- forced
preemption, in the future, will kick those who do not obey) and allows
us to avoid userspace blocking forward progress with e.g. unbounded
MI_SEMAPHORE_WAIT.
For the starting point here, we use the jiffie as our timeslice so that
we should be reasonably efficient wrt frequent CPU wakeups.
Testcase: igt/gem_exec_scheduler/semaphore-resolve
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-2-chris@chris-wilson.co.uk
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
Remember to keep the rings pinned as well as the context image until the
GPU is no longer active.
v2: Introduce a ring->pin_count primarily to hide the
mock_ring that doesn't fit into the normal GGTT vma picture.
v3: Order is important in teardown, ringbuffer submission needs to drop
the pin count on the engine->kernel_context before it can gleefully free
its ring.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110946
Fixes: ce476c80b8 ("drm/i915: Keep contexts pinned until after the next kernel context switch")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619170135.15281-1-chris@chris-wilson.co.uk
Since commit eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on
struct_mutex"), the I915_WAIT_LOCKED flags passed to i915_request_wait()
has been defunct. Now go ahead and remove it from all callers.
References: eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-3-chris@chris-wilson.co.uk
The process_csb routine from execlists_submission is incompatible with
the GuC backend. Add a warning to detect if we accidentally end up in
the wrong spot.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618110736.31155-1-chris@chris-wilson.co.uk
The idea behind keeping the saturation mask local to a context backfired
spectacularly. The premise with the local mask was that we would be more
proactive in attempting to use semaphores after each time the context
idled, and that all new contexts would attempt to use semaphores
ignoring the current state of the system. This turns out to be horribly
optimistic. If the system state is still oversaturated and the existing
workloads have all stopped using semaphores, the new workloads would
attempt to use semaphores and be deprioritised behind real work. The
new contexts would not switch off using semaphores until their initial
batch of low priority work had completed. Given sufficient backload load
of equal user priority, this would completely starve the new work of any
GPU time.
To compensate, remove the local tracking in favour of keeping it as
global state on the engine -- once the system is saturated and
semaphores are disabled, everyone stops attempting to use semaphores
until the system is idle again. One of the reason for preferring local
context tracking was that it worked with virtual engines, so for
switching to global state we could either do a complete check of all the
virtual siblings or simply disable semaphores for those requests. This
takes the simpler approach of disabling semaphores on virtual engines.
The downside is that the decision that the engine is saturated is a
local measure -- we are only checking whether or not this context was
scheduled in a timely fashion, it may be legitimately delayed due to user
priorities. We still have the same dilemma though, that we do not want
to employ the semaphore poll unless it will be used.
v2: Explain why we need to assume the worst wrt virtual engines.
Fixes: ca6e56f654 ("drm/i915: Disable semaphore busywaits on saturated systems")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-8-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Gj1MeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGctkH/0At3+SQPY2JJSy8
i6+TDeytFx9OggeGLPHChRfehkAlvMb/kd34QHnuEvDqUuCAMU6HZQJFKoK9mvFI
sDJVayPGDSqpm+iv8qLpMBPShiCXYVnGZeVfOdv36jUswL0k6wHV1pz4avFkDeZa
1F4pmI6O2XRkNTYQawbUaFkAngWUCBG9ECLnHJnuIY6ohShBvjI4+E2JUaht+8gO
M2h2b9ieddWmjxV3LTKgsK1v+347RljxdZTWnJ62SCDSEVZvsgSA9W2wnebVhBkJ
drSmrFLxNiM+W45mkbUFmQixRSmjv++oRR096fxAnodBxMw0TDxE1RiMQWE6rVvG
N6MC6xA=
=+B0P
-----END PGP SIGNATURE-----
Merge v5.2-rc5 into drm-next
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier
removal topic branch into drm-misc-next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This has caught me out on countless occasions, when we retrieve a pointer
from the submission/execlists backend, it does not carry a reference to
the context or ring. Those are only pinned while the request is active,
so if we see the request is already completed, it may be in the process
of being retired and those pointers defunct.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110938
Fixes: 3a068721a9 ("drm/i915: Show ring->start for the ELSP context/request queue")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618161951.28820-2-chris@chris-wilson.co.uk
Updates the live_workarounds selftest to handle whitelisted
registers that are flagged as read only.
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-5-John.C.Harrison@Intel.com
Updated whitelist table for ICL.
v2: Reduce changes to just those required for media driver until
the selftest can be updated to support the new features of the
other entries.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-4-John.C.Harrison@Intel.com
Newer hardware requires setting up whitelists on engines other than
render. So, extend the whitelist code to support all engines.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-3-John.C.Harrison@Intel.com
Newer hardware adds flags to the whitelist work-around register. These
allow per access direction privileges and ranges.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-2-John.C.Harrison@Intel.com
All page directories are identical in function, only the position in the
hierarchy differ. Use same base type for directory functionality.
v2: cleanup, size always 512, init to null
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164350.30415-2-mika.kuoppala@linux.intel.com
Now that we have a new subdirectory for display code, continue by moving
modesetting core code.
display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this
is, again, a surprisingly clean operation.
v2:
- don't move intel_sideband.[ch] (Ville)
- use tabs for Makefile file lists and sort them
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com
EHL defines two new MOCS table entries but is otherwise compatible with
the ICL MOCS table.
These table entries (16 and 17) should still be considered unused for
ICL and as such their behavior remains undefined for that platform.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530234014.22340-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
To continue the onslaught of removing the assumption of a global
execution ordering, another casualty is the engine->timeline. Without an
actual timeline to track, it is overkill and we can replace it with a
much less grand plain list. We still need a list of requests inflight,
for the simple purpose of finding inflight requests (for retiring,
resetting, preemption etc).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-3-chris@chris-wilson.co.uk
We need to keep the context image pinned in memory until after the GPU
has finished writing into it. Since it continues to write as we signal
the final breadcrumb, we need to keep it pinned until the request after
it is complete. Currently we know the order in which requests execute on
each engine, and so to remove that presumption we need to identify a
request/context-switch we know must occur after our completion. Any
request queued after the signal must imply a context switch, for
simplicity we use a fresh request from the kernel context.
The sequence of operations for keeping the context pinned until saved is:
- On context activation, we preallocate a node for each physical engine
the context may operate on. This is to avoid allocations during
unpinning, which may be from inside FS_RECLAIM context (aka the
shrinker)
- On context deactivation on retirement of the last active request (which
is before we know the context has been saved), we add the
preallocated node onto a barrier list on each engine
- On engine idling, we emit a switch to kernel context. When this
switch completes, we know that all previous contexts must have been
saved, and so on retiring this request we can finally unpin all the
contexts that were marked as deactivated prior to the switch.
We can enhance this in future by flushing all the idle contexts on a
regular heartbeat pulse of a switch to kernel context, which will also
be used to check for hung engines.
v2: intel_context_active_acquire/_release
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-1-chris@chris-wilson.co.uk
Matching the underlying get/put functions.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-8-daniele.ceraolospurio@intel.com
The functions where internally already only using the structure, so we
need to just flip the interface.
v2: rebase
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-7-daniele.ceraolospurio@intel.com
We already use a mutex to serialise i915_reset() and wedging, so all we
need it to link that into i915_request_wait() and we have our lock cycle
detection.
v2.5: Take error mutex for selftests
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614071023.17929-3-chris@chris-wilson.co.uk
Since commit a679f58d05 ("drm/i915: Flush pages on acquisition"), we
flush objects on acquire their pages and as such when we create an
object for the purpose of writing into it, we do not need to manually
flush.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614111053.25615-1-chris@chris-wilson.co.uk
As the fence registers only apply to regions inside the GGTT is makes
more sense that we track these as part of the i915_ggtt and not the
general mm. In the next patch, we will then pull the register locking
underneath the i915_ggtt.mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073254.24048-1-chris@chris-wilson.co.uk
Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.
ENGINE_POSTING_READ16 is added to replace one engine->mmio_base relative
call site.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-3-tvrtko.ursulin@linux.intel.com
We cannot allow ourselves to wait on the GPU while holding any lock as we
may need to reset the GPU. While there is not an explicit lock between
the two operations, lockdep cannot detect the dependency. So let's tell
lockdep about the wait/reset dependency with an explicit lockmap.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612085246.16374-1-chris@chris-wilson.co.uk
Before we commit ourselves to writing commands into the
ringbuffer and submitting the request, allow signals to interrupt
acquisition of the timeline mutex. We allow ourselves to be interrupted
at any time later if we need to block for space in the ring, anyway.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610103610.19883-1-chris@chris-wilson.co.uk
The function operates on the render engine so make the input reflect it.
v2:
* Pass engine to read_subslice_reg. (Chris)
* Drop inline from read_subslice_reg.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610125706.26110-1-tvrtko.ursulin@linux.intel.com
Similar to earlier conversions, eliminate the implicit dev_priv by
introducing some helpers which take the engine parameter (since the
register itself is per engine).
v2:
* Always use parentheses in macro arguments.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607101535.767-1-tvrtko.ursulin@linux.intel.com
The plan is to use the blitter engine for async object clearing when
using local memory, but before we can move the worker to get_pages() we
have to first tame some more of our struct_mutex usage. With this in
mind we should be able to upstream the object clearing as some
selftests, which should serve as a guinea pig for the ongoing locking
rework and upcoming async get_pages() framework.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529123108.24422-2-matthew.auld@intel.com
We should check "request[n]" instead of just "request".
Fixes: 78e41ddd21 ("drm/i915: Apply an execution_mask to the virtual_engine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529110355.GA19119@mwanda
Currently, the subslice_mask runtime parameter is stored as an
array of subslices per slice. Expand the subslice mask array to
better match what is presented to userspace through the
I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is
then calculated:
slice * subslice stride + subslice index / 8
v2: fix spacing in set_sseu_info args
use set_sseu_info to initialize sseu data when building
device status in debugfs
rename variables in intel_engine_types.h to avoid checkpatch
warnings
v3: update headers in intel_sseu.h
v4: add const to some sseu_dev_info variables
use sseu->eu_stride for EU stride calculations
v5: address review comments from Tvrtko and Daniele
v6: remove extra space in intel_sseu_get_subslices
return the correct subslice enable in for_each_instdone
add GEM_BUG_ON to ensure user doesn't pass invalid ss_mask size
use printk formatted string for subslice mask
v7: remove string.h header and rebase
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-6-stuart.summers@intel.com
Move functions to intel_sseu.h and remove inline qualifier.
Additionally, ensure these are all prefixed with intel_sseu_*
to match the convention of other functions in i915.
v2: fix spacing from checkpatch warning
v3: squash helper function changes into a single patch
break 80 character line to fix checkpatch warning
move get/set_eus helpers to intel_device_info.c
v4: Remove intel_ prefix from static functions in
intel_device_info.c and correctly copy changes
to stride calculation in those functions.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-5-stuart.summers@intel.com
Add a new function to return the number of subslices per slice to
consolidate code usage.
v2: rebase on changes to move sseu struct to intel_sseu.h
v3: add intel_* prefix to sseu_subslices_per_slice
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-4-stuart.summers@intel.com
Subslice stride and EU stride are calculated multiple times in
i915_query. Move this calculation to a macro to reduce code duplication.
v2: update headers in intel_sseu.h
v3: use GEN_SSEU_STRIDE for stride calculations in intel_sseu.h
apply s/bits/max_entries/ to GEN_SSEU_STRIDE parameter
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-3-stuart.summers@intel.com
An old optimisation to reduce the number of atomics per batch sadly
relies on struct_mutex for coordination. In order to remove struct_mutex
from serialising object/context closing, always taking and releasing an
active reference on first use / last use greatly simplifies the locking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-15-chris@chris-wilson.co.uk
Rename the engine this HW context is currently active upon (that we are
flying upon) to disambiguate between the mixture of different active
terms (and prevent conflict in future patches).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-14-chris@chris-wilson.co.uk
Use the per-object local lock to control the cache domain of the
individual GEM objects, not struct_mutex. This is a huge leap forward
for us in terms of object-level synchronisation; execbuffers are
coordinated using the ww_mutex and pread/pwrite is finally fully
serialised again.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-10-chris@chris-wilson.co.uk
For convenience in avoiding inline spaghetti, keep the type definition
as a separate header.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-1-chris@chris-wilson.co.uk
Setting bit5 (headerless msg for preemptible GPGPU context) of SAMPLER_MODE
register to enable support for the headless msgs on gen11. None of existing
use cases will be affected by this as this change makes both types of
message - headerless and w/ header supported at the same time. It also
complies with the new recommendation for the default bit value for the
next gen.
v2: rewrote commit message to include more information
v3: setting the bit in icl_ctx_workarounds_init()
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425055005.21790-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We were testing full GPU reset in atomic context without correctly
wrapping it by prepare/finish steps. This could confuse our GuC
reset handling code.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522193203.23932-4-michal.wajdeczko@intel.com
Split igt_atomic_reset selftests into separate full & engines parts,
so we can move former to the dedicated reset selftests file.
While here change engines test to loop first over atomic phases and
then loop over available engines.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522193203.23932-3-michal.wajdeczko@intel.com
igt_global_reset and igt_wedged_reset testcases are first candidates.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522193203.23932-2-michal.wajdeczko@intel.com
