This changeset adds support for SGI Octane/Octane2 workstations.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
All platforms using pci-xtalk-bridge can share common phys_to_dma/
dma_to_phys function. So we move it form ip27 specific file to
pci-xtalk-bridge.c
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
- Fix VDSO time-related function behavior for systems where we need to
fall back to syscalls, but were instead returning bogus results.
- A fix to TLB exception handlers for Cavium Octeon systems where they
would inadvertently clobber the $1/$at register.
- A build fix for bcm63xx configurations.
- Switch to using my @kernel.org email address.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXbTEbhYccGF1bGJ1cnRv
bkBrZXJuZWwub3JnAAoJED6nn6y1dQDd+HsBAJ2Zvzlm+CftfNTPbG1SihhyH3s4
edn8VuexsPJp+TjJAP9UZHPQj35tvS5MWYRg0YsNz9HYPTVclYdEsLS9KbSMCw==
=YNU+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXbylbRYccGF1bGJ1cnRv
bkBrZXJuZWwub3JnAAoJED6nn6y1dQDd3JkA/2zyRKMikSbQjyr3E2XRnx0HwIUa
UjeQvSR0+wofAI0VAP9D3IzB0ugAsGawUSWeYHK5CXBoSrsFNasjxNBT/G1MDA==
=duXm
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.4_3' into mips-next
Pull in mips-fixes primarily to gain build fixes in order to allow
better testing of mips-next.
A few MIPS fixes:
- Fix VDSO time-related function behavior for systems where we need to
fall back to syscalls, but were instead returning bogus results.
- A fix to TLB exception handlers for Cavium Octeon systems where they
would inadvertently clobber the $1/$at register.
- A build fix for bcm63xx configurations.
- Switch to using my @kernel.org email address.
Signed-off-by: Paul Burton <paulburton@kernel.org>
When I update kernel with loongson3_defconfig based on the Loongson 3A3000
platform, then using dmesg command to show kernel ring buffer, the initial
kernel messages have disappeared due to the log buffer is too small, it is
better to change the kernel log buffer size from 16KB to 128KB which is
enough to save the boot messages.
Since the default LOG_BUF_SHIFT value is 17, the default kernel log buffer
size is 128KB, just delete the CONFIG_LOG_BUF_SHIFT line.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: paul.burton@mips.com
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: chenhc@lemote.com
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
MAX_COMPACT_NODE is a leftover from the compact node implementation,
which is removed now. Use MAX_NUMNODES instead.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Clean up legacy code after stripping out Loongson2ef code.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: paul.burton@mips.com
Remove unrelevent macros, defines and codes from loongson2ef mach.
Also rename some defines to match new naming.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: paul.burton@mips.com
As later model of GSx64 family processors including 2-series-soc have
similar design with initial loongson3a while loongson2e/f seems less
identical, we separate loongson2e/f support code out of mach-loongson64
to make our life easier.
This patch contains mostly file moving works.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[paulburton@kernel.org: Squash in the MAINTAINERS updates]
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: paul.burton@mips.com
Commit 775b089aef ("MIPS: tlbex: Remove cpu_has_local_ebase") removed
generating tlb refill handlers for every CPU, which was needed for
generating per node exception handlers on IP27. Instead of resurrecting
(and fixing) refill handler generation, we simply copy all exception
vectors from the boot node to the other nodes. Also remove the config
option since the memory tradeoff for expection handler replication
is just 8k per node.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
CPU_LOONGSON2 -> CPU_LOONGSON2EF
CPU_LOONGSON3 -> CPU_LOONGSON64
As newer loongson-2 products (2G/2H/2K1000) can share kernel
implementation with loongson-3 while 2E/2F are less similar with
other LOONGSON64 products.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: chenhc@lemote.com
Cc: paul.burton@mips.com
asm/sgi/sgi.h is unused, time to remove it.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
build_restore_pagemask() will restore the value of register $1/$at when
its restore_scratch argument is non-zero, and aims to do so by filling a
branch delay slot. Commit 0b24cae4d5 ("MIPS: Add missing EHB in mtc0
-> mfc0 sequence.") added an EHB instruction (Execution Hazard Barrier)
prior to restoring $1 from a KScratch register, in order to resolve a
hazard that can result in stale values of the KScratch register being
observed. In particular, P-class CPUs from MIPS with out of order
execution pipelines such as the P5600 & P6600 are affected.
Unfortunately this EHB instruction was inserted in the branch delay slot
causing the MFC0 instruction which performs the restoration to no longer
execute along with the branch. The result is that the $1 register isn't
actually restored, ie. the TLB refill exception handler clobbers it -
which is exactly the problem the EHB is meant to avoid for the P-class
CPUs.
Similarly build_get_pgd_vmalloc() will restore the value of $1/$at when
its mode argument equals refill_scratch, and suffers from the same
problem.
Fix this by in both cases moving the EHB earlier in the emitted code.
There's no reason it needs to immediately precede the MFC0 - it simply
needs to be between the MTC0 & MFC0.
This bug only affects Cavium Octeon systems which use
build_fast_tlb_refill_handler().
Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes: 0b24cae4d5 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
Cc: Dmitry Korotin <dkorotin@wavecomp.com>
Cc: stable@vger.kernel.org # v3.15+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
IP27 uses ARC prom only for parsing prom arguments and has a hack
for IP27 to make the ARC code behave. By introducing config symbol
ARC_CMDLINE_ONLY IP27 only drags in ARC cmdline parsing and does
everything else in IP27 specific code.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
prom_argc and prom_argv are only used by prom_init_cmdline(), so
we could pass them directly as function argument.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Calling register_smp_ops() in plat_mem_setup() is still early enough.
So by doing this we could remove the ugly #ifdef CONFIG_SGI_IP27 in
fw/arc/init.c.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
IP27 code has a few externs distributed over .c files. Collect them
together into one commcon header file.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
The vectors span more than one byte, so mark them as arrays.
Fixes the following build error when building when using GCC 8.3:
In file included from ./include/linux/string.h:19,
from ./include/linux/bitmap.h:9,
from ./include/linux/cpumask.h:12,
from ./arch/mips/include/asm/processor.h:15,
from ./arch/mips/include/asm/thread_info.h:16,
from ./include/linux/thread_info.h:38,
from ./include/asm-generic/preempt.h:5,
from ./arch/mips/include/generated/asm/preempt.h:1,
from ./include/linux/preempt.h:81,
from ./include/linux/spinlock.h:51,
from ./include/linux/mmzone.h:8,
from ./include/linux/bootmem.h:8,
from arch/mips/bcm63xx/prom.c:10:
arch/mips/bcm63xx/prom.c: In function 'prom_init':
./arch/mips/include/asm/string.h:162:11: error: '__builtin_memcpy' forming offset [2, 32] is out of the bounds [0, 1] of object 'bmips_smp_movevec' with type 'char' [-Werror=array-bounds]
__ret = __builtin_memcpy((dst), (src), __len); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/bcm63xx/prom.c:97:3: note: in expansion of macro 'memcpy'
memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20);
^~~~~~
In file included from arch/mips/bcm63xx/prom.c:14:
./arch/mips/include/asm/bmips.h:80:13: note: 'bmips_smp_movevec' declared here
extern char bmips_smp_movevec;
Fixes: 18a1eef92d ("MIPS: BMIPS: Introduce bmips.h")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
On some MIPS variants (e.g. MIPS r1), vDSO clock_mode is set to
VDSO_CLOCK_NONE.
When VDSO_CLOCK_NONE is set the expected kernel behavior is to fallback
on syscalls. To do that the generic vDSO library expects UULONG_MAX as
return value of __arch_get_hw_counter().
Fix __arch_get_hw_counter() on MIPS defining a __VDSO_USE_SYSCALL case
that addressed the described scenario.
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
SGI Octane (IP30) doesn't have RTC register directly mapped into CPU
address space, but accesses RTC registers with an address and data
register. This is now supported by additional access functions, which
are selected by a new field in platform data. Removed plat_read/plat_write
since there is no user and their usage could introduce lifetime issue,
when functions are placed in different modules.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Acked-by: Joshua Kinard <kumba@gentoo.org>
Reviewed-by: Joshua Kinard <kumba@gentoo.org>
Link: https://lore.kernel.org/r/20191014214621.25257-1-tbogendoerfer@suse.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Here are a lot of small USB driver fixes for 5.4-rc3.
syzbot has stepped up its testing of the USB driver stack, now able to
trigger fun race conditions between disconnect and probe functions.
Because of that we have a lot of fixes in here from Johan and others
fixing these reported issues that have been around since almost all
time.
We also are just deleting the rio500 driver, making all of the syzbot
bugs found in it moot as it turns out no one has been using it for years
as there is a userspace version that is being used instead.
There are also a number of other small fixes in here, all resolving
reported issues or regressions.
All have been in linux-next without any reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXaH78w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk7mACgygFyLQ6GRUTTnGDcohZu44cuMO4AnR/MTrRq
/jiXPRUMsltMV7DHcq+S
=QX4p
-----END PGP SIGNATURE-----
Merge tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a lot of small USB driver fixes for 5.4-rc3.
syzbot has stepped up its testing of the USB driver stack, now able to
trigger fun race conditions between disconnect and probe functions.
Because of that we have a lot of fixes in here from Johan and others
fixing these reported issues that have been around since almost all
time.
We also are just deleting the rio500 driver, making all of the syzbot
bugs found in it moot as it turns out no one has been using it for
years as there is a userspace version that is being used instead.
There are also a number of other small fixes in here, all resolving
reported issues or regressions.
All have been in linux-next without any reported issues"
* tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits)
USB: yurex: fix NULL-derefs on disconnect
USB: iowarrior: use pr_err()
USB: iowarrior: drop redundant iowarrior mutex
USB: iowarrior: drop redundant disconnect mutex
USB: iowarrior: fix use-after-free after driver unbind
USB: iowarrior: fix use-after-free on release
USB: iowarrior: fix use-after-free on disconnect
USB: chaoskey: fix use-after-free on release
USB: adutux: fix use-after-free on release
USB: ldusb: fix NULL-derefs on driver unbind
USB: legousbtower: fix use-after-free on release
usb: cdns3: Fix for incorrect DMA mask.
usb: cdns3: fix cdns3_core_init_role()
usb: cdns3: gadget: Fix full-speed mode
USB: usb-skeleton: drop redundant in-urb check
USB: usb-skeleton: fix use-after-free after driver unbind
USB: usb-skeleton: fix NULL-deref on disconnect
usb:cdns3: Fix for CV CH9 running with g_zero driver.
usb: dwc3: Remove dev_err() on platform_get_irq() failure
usb: dwc3: Switch to platform_get_irq_byname_optional()
...
We have no need for the builtin_cmdline array to be fixed at the length
of COMMAND_LINE_SIZE - we'll only copy out the string it contains up to
its NULL terminator anyway, and cap the size at COMMAND_LINE_SIZE when
copying into or concatenating with boot_command_line.
The string value is also constant, so we can declare it as such to place
it in the .init.rodata section.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Configurations with CONFIG_OF_EARLY_FLATTREE=n fail to build since
commit 7784cac697 ("MIPS: cmdline: Clean up boot_command_line
initialization") because of_scan_flat_dt() & of_scan_flat_dt() are not
defined in these configurations. Fix this by #ifdef'ing the affected
code...
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 7784cac697 ("MIPS: cmdline: Clean up boot_command_line initialization")
Reported-by: kbuild test robot <lkp@intel.com>
Cc: linux-mips@vger.kernel.org
Commit 7784cac697 ("MIPS: cmdline: Clean up boot_command_line
initialization") made use of builtin_cmdline conditional upon plain C if
statements rather than preprocessor #ifdef's. This caused build failures
for configurations with CONFIG_CMDLINE_BOOL=n where builtin_cmdline
wasn't defined, for example:
arch/mips/kernel/setup.c: In function 'bootcmdline_init':
>> arch/mips/kernel/setup.c:582:30: error: 'builtin_cmdline' undeclared
(first use in this function); did you mean 'builtin_driver'?
strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
^~~~~~~~~~~~~~~
builtin_driver
arch/mips/kernel/setup.c:582:30: note: each undeclared identifier is
reported only once for each function it appears in
Fix this by defining builtin_cmdline as an empty string in the affected
configurations. All of the paths that use it should be optimized out
anyway so the data itself gets optimized away too.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 7784cac697 ("MIPS: cmdline: Clean up boot_command_line initialization")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: linux-mips@vger.kernel.org
Building with Clang errors after commit 6baaeadae9 ("MIPS: Provide
unroll() macro, use it for cache ops") since the GCC_VERSION macro
is defined in include/linux/compiler-gcc.h, which is only included
in compiler.h when using GCC:
In file included from arch/mips/kernel/mips-mt.c:20:
./arch/mips/include/asm/r4kcache.h:254:1: error: use of undeclared
identifier 'GCC_VERSION'; did you mean 'S_VERSION'?
__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32,
)
^
./arch/mips/include/asm/r4kcache.h:219:4: note: expanded from macro
'__BUILD_BLAST_CACHE'
cache_unroll(32, kernel_cache, indexop,
^
./arch/mips/include/asm/r4kcache.h:203:2: note: expanded from macro
'cache_unroll'
unroll(times, _cache_op, insn, op, (addr) + (i++ * (lsize)));
^
./arch/mips/include/asm/unroll.h:28:15: note: expanded from macro
'unroll'
BUILD_BUG_ON(GCC_VERSION >= 40700 && \
^
Use CONFIG_GCC_VERSION, which will always be set by Kconfig.
Additionally, Clang 8 had improvements around __builtin_constant_p so
use that as a lower limit for this check with Clang (although MIPS
wasn't buildable until Clang 9); building a kernel with Clang 9.0.0
has no issues after this change.
Fixes: 6baaeadae9 ("MIPS: Provide unroll() macro, use it for cache ops")
Link: https://github.com/ClangBuiltLinux/linux/issues/736
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Cc: Nick Desaulniers <ndesaulniers@google.com>
GCC 9.x automatically enables support for Loongson MMI instructions when
using some -march= flags, and then errors out when -msoft-float is
specified with:
cc1: error: ‘-mloongson-mmi’ must be used with ‘-mhard-float’
The kernel shouldn't be using these MMI instructions anyway, just as it
doesn't use floating point instructions. Explicitly disable them in
order to fix the build with GCC 9.x.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 3702bba5eb ("MIPS: Loongson: Add GCC 4.4 support for Loongson2E")
Fixes: 6f7a251a25 ("MIPS: Loongson: Add basic Loongson 2F support")
Fixes: 5188129b8c ("MIPS: Loongson-3: Improve -march option and move it to Platform")
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: stable@vger.kernel.org # v2.6.32+
Cc: linux-mips@vger.kernel.org
A Golang developer reported MIPS hwcap isn't reflecting instructions
that the processor actually supported so programs can't apply optimized
code at runtime.
Thus we export the ASEs that can be used in userspace programs.
Reported-by: Meng Zhuo <mengzhuo1203@gmail.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-mips@vger.kernel.org
Cc: Paul Burton <paul.burton@mips.com>
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Paul Burton <paul.burton@mips.com>
Our current code to initialize boot_command_line is a mess. Some of this
is due to the addition of too many options over the years, and some of
this is due to workarounds for early_init_dt_scan_chosen() performing
actions specific to options from other architectures that probably
shouldn't be in generic code.
Clean this up by introducing a new bootcmdline_init() function that
simplifies the initialization somewhat. The major changes are:
- Because bootcmdline_init() is a function it can return early in the
CONFIG_CMDLINE_OVERRIDE case.
- We clear boot_command_line rather than inheriting whatever
early_init_dt_scan_chosen() may have left us. This means we no longer
need to set boot_command_line to a space character in an attempt to
prevent early_init_dt_scan_chosen() from copying CONFIG_CMDLINE into
boot_command_line without us knowing about it.
- Indirection via USE_PROM_CMDLINE, USE_DTB_CMDLINE, EXTEND_WITH_PROM &
BUILTIN_EXTEND_WITH_PROM macros is removed; they seemingly served only
to obfuscate the code.
- The logic is cleaner, clearer & commented.
Two minor drawbacks of this approach are:
1) We call of_scan_flat_dt(), which means we scan through the DT again.
The overhead is fairly minimal & shouldn't be noticeable.
2) cmdline_scan_chosen() duplicates a small amount of the logic from
early_init_dt_scan_chosen(). Alternatives might be to allow the
generic FDT code to keep & expose a copy of the arguments taken from
the /chosen node's bootargs property, or to introduce a function like
early_init_dt_scan_chosen() that retrieves them without modification
to handle CONFIG_CMDLINE. Neither of these sounds particularly
cleaner though, and this way we at least keep the extra work in
arch/mips.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
CMDLINE, CMDLINE_BOOL & CMDLINE_FORCE all explicitly specify default
values that are the same as the default value for their respective types
anyway (ie. n for booleans, and the empty string for strings).
Remove the redundant defaults.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: linux-mips@vger.kernel.org
EARLY_PRINTK uses ArcWrite (via prom_putchar) on IP22/28, which needs
to not mess up PROMs data structures. ARC PROM gives out a list of
memory chunks, which are used and which are free. This fixes the
problem of not working early printk.
By using XKPHYS spaces more than 256MB memory on Indigo2 R4k machines
is working now, too.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
IP22 started at physical 0x08000000. To avoid wasting memory for
page structs set PHYS_OFFSET.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Pointer arguments for 32bit ARC PROMs must reside in CKSEG0/1. While
the initial stack resides in CKSEG0 the first kernel thread stack
is already placed at a XKPHYS address, which ARC32 can't handle.
The workaround here is to use static variables, which are placed
into BSS and linked to a CKSEG0 address.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Instead of having a default y option with depends simply select
options for the platforms where they are needed.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
When using a 64bit kernel with generic spaces setup stack is
also placed in XKPYHS, which the 32bit PROM can't handle.
By using call_o32 for ARC_CALLs a stack placed in KSEG0 is used
when calling PROM.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Current kernel uses only a few ARC calls. Drop all unused ARC functions.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
We have assembly implementations of strcpy(), strncpy(), strcmp() &
strncmp() which:
- Are simple byte-at-a-time loops with no particular optimizations. As
a comment in the code describes, they're "rather naive".
- Offer no clear performance advantage over the generic C
implementations - in microbenchmarks performed by Alexander Lobakin
the asm functions sometimes win & sometimes lose, but generally not
by large margins in either direction.
- Don't support 64-bit kernels, where we already make use of the
generic C implementations.
- Tend to bloat kernel code size due to inlining.
- Don't support CONFIG_FORTIFY_SOURCE.
- Won't support nanoMIPS without rework.
For all of these reasons, delete the asm implementations & make use of
the generic C implementations for 32-bit kernels just like we already do
for 64-bit kernels.
Signed-off-by: Paul Burton <paul.burton@mips.com>
URL: https://lore.kernel.org/linux-mips/a2a35f1cf58d6db19eb4af9b4ae21e35@dlink.ru/
Cc: Alexander Lobakin <alobakin@dlink.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: linux-mips@vger.kernel.org
Currently we have a lot of duplication in asm/r4kcache.h to handle
manually unrolling loops of cache ops for various line sizes, and we
have to explicitly handle the difference in cache op immediate width
between MIPSr6 & earlier ISA revisions with further duplication.
Introduce an unroll() macro in asm/unroll.h which expands to a switch
statement which is used to call a function or expand a preprocessor
macro a compile-time constant number of times in a row - effectively
explicitly unrolling a loop. We make use of this here to remove the
cache op duplication & will use it further in later patches.
A nice side effect of this is that calculating the cache op offset
immediate is now the compiler's responsibility, so we're no longer
sensitive to the width change of that immediate in MIPSr6 & will be
similarly agnostic to immediate width in any future supported ISA.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Use ARRAY_SIZE to caluculate the top of the o32 stack.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Commit ac7c3e4ff4 ("compiler: enable CONFIG_OPTIMIZE_INLINING
forcibly") allows compiler to uninline functions marked as 'inline'.
In cace of __xchg this would cause to reference function
__xchg_called_with_bad_pointer, which is an error case
for catching bugs and will not happen for correct code, if
__xchg is inlined.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Commit 3c1d3f0979 ("MIPS: futex: Emit Loongson3 sync workarounds
within asm") inadvertently removed the newlines following
__WEAK_LLSC_MB, which causes build failures for configurations in which
__WEAK_LLSC_MB expands to a sync instruction:
{standard input}: Assembler messages:
{standard input}:9346: Error: symbol `sync3' is already defined
{standard input}:9380: Error: symbol `sync3' is already defined
...
Fix this by restoring the newlines to separate the sync instruction from
anything following it (such as the 3: label), preventing inadvertent
concatenation.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 3c1d3f0979 ("MIPS: futex: Emit Loongson3 sync workarounds within asm")
IOC3 chips in SGI system are conntected to a bridge ASIC, which has
a 1-wire prom attached with part number information. This changeset
uses this information to create PCI subsystem information, which
the MFD driver uses for further platform device setup.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
FORTIFY_SOURCE detects various overflows at compile and run time.
(6974f0c455 ("include/linux/string.h:
add the option of fortified string.h functions)
ARCH_HAS_FORTIFY_SOURCE means that the architecture can be built and
run with CONFIG_FORTIFY_SOURCE.
Since mips can be built and run with that flag,
select ARCH_HAS_FORTIFY_SOURCE as default.
Signed-off-by: Dmitry Korotin <dkorotin@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
CSR IPI and legacy MMIO use the same infrastructure, but CSR IPI is
faster than legacy MMIO IPI. This patch enable CSR IPI if possible
(except for MailBox, because CSR IPI is too complicated for MailBox).
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-mips@vger.kernel.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
All Loongson-3 CPU family:
Code-name Brand-name PRId
Loongson-3A R1 Loongson-3A1000 0x6305
Loongson-3A R2 Loongson-3A2000 0x6308
Loongson-3A R2.1 Loongson-3A2000 0x630c
Loongson-3A R3 Loongson-3A3000 0x6309
Loongson-3A R3.1 Loongson-3A3000 0x630d
Loongson-3A R4 Loongson-3A4000 0xc000
Loongson-3B R1 Loongson-3B1000 0x6306
Loongson-3B R2 Loongson-3B1500 0x6307
Features of R4 revision of Loongson-3A:
- All R2/R3 features, including SFB, V-Cache, FTLB, RIXI, DSP, etc.
- Support variable ASID bits.
- Support MSA and VZ extensions.
- Support CPUCFG (CPU config) and CSR (Control and Status Register)
extensions.
- 64 entries of VTLB (classic TLB), 2048 entries of FTLB (8-way
set-associative).
Now 64-bit Loongson processors has three types of PRID.IMP: 0x6300 is
the classic one so we call it PRID_IMP_LOONGSON_64C (e.g., Loongson-2E/
2F/3A1000/3B1000/3B1500/3A2000/3A3000), 0x6100 is for some processors
which has reduced capabilities so we call it PRID_IMP_LOONGSON_64R
(e.g., Loongson-2K), 0xc000 is supposed to cover all new processors in
general (e.g., Loongson-3A4000+) so we call it PRID_IMP_LOONGSON_64G.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-mips@vger.kernel.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
The memory initialization of SGI-IP27 is already half-way to support
SPARSEMEM. It only had free_bootmem_with_active_regions() left-overs
interfering with sparse_memory_present_with_active_regions().
Replace these calls with simpler memblocks_present() call in prom_meminit()
and adjust arch/mips/Kconfig to enable SPARSEMEM and SPARSEMEM_EXTREME for
SGI-IP27.
Co-developed-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
When Loongson3 LL/SC errata workarounds are enabled (ie.
CONFIG_CPU_LOONGSON3_WORKAROUNDS=y) run a tool to scan through the
compiled kernel & ensure that the workaround is applied correctly. That
is, ensure that:
- Every LL or LLD instruction is preceded by a sync instruction.
- Any branches from within an LL/SC loop to outside of that loop
target a sync instruction.
Reasoning for these conditions can be found by reading the comment above
the definition of __SYNC_loongson3_war in arch/mips/include/asm/sync.h.
This tool will help ensure that we don't inadvertently introduce code
paths that miss the required workarounds.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
In ejtag_debug_handler() we must reload the address of
ejtag_debug_buffer_spinlock if an sc fails, since the address in k0 will
have been clobbered by the result of the sc instruction. In the case
where we simply load a non-zero value (ie. there's contention for the
lock) the address will not be clobbered & we can simply branch back to
repeat the load from memory without reloading the address into k0.
The primary motivation for this change is that it moves the target of
the bnez instruction to an instruction within the LL/SC loop (the LL
itself), which we know contains no other memory accesses & therefore
isn't affected by Loongson3 LL/SC errata.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
In ejtag_debug_handler we use LL & SC instructions to acquire & release
an open-coded spinlock. For Loongson3 systems affected by LL/SC errata
this requires that we insert a sync instruction prior to the LL in order
to ensure correct behavior of the LL/SC loop.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Loongson3 systems with CONFIG_CPU_LOONGSON3_WORKAROUNDS enabled already
emit a full completion barrier as part of the inline assembly containing
LL/SC loops for atomic operations. As such the barrier emitted by
__smp_mb__before_atomic() is redundant, and we can remove it.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
The loongson_llsc_mb() macro is no longer used - instead barriers are
emitted as part of inline asm using the __SYNC() macro. Remove the
now-defunct loongson_llsc_mb() macro.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Generate the sync instructions required to workaround Loongson3 LL/SC
errata within inline asm blocks, which feels a little safer than doing
it from C where strictly speaking the compiler would be well within its
rights to insert a memory access between the separate asm statements we
previously had, containing sync & ll instructions respectively.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Generate the sync instructions required to workaround Loongson3 LL/SC
errata within inline asm blocks, which feels a little safer than doing
it from C where strictly speaking the compiler would be well within its
rights to insert a memory access between the separate asm statements we
previously had, containing sync & ll instructions respectively.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
When building a kernel configured to support Loongson3 LL/SC workarounds
(ie. CONFIG_CPU_LOONGSON3_WORKAROUNDS=y) the inline assembly in
__xchg_asm() & __cmpxchg_asm() already emits completion barriers, and as
such we don't need to emit extra barriers from the xchg() or cmpxchg()
macros. Add compile-time constant checks causing us to omit the
redundant memory barriers.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Generate the sync instructions required to workaround Loongson3 LL/SC
errata within inline asm blocks, which feels a little safer than doing
it from C where strictly speaking the compiler would be well within its
rights to insert a memory access between the separate asm statements we
previously had, containing sync & ll instructions respectively.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Use smp_mb__before_atomic() rather than smp_mb__before_llsc() in
test_and_set_bit(), test_and_clear_bit() & test_and_change_bit(). The
_atomic() versions make semantic sense in these cases, and will allow a
later patch to omit redundant barriers for Loongson3 systems that
already include a barrier within __test_bit_op().
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Generate the sync instructions required to workaround Loongson3 LL/SC
errata within inline asm blocks, which feels a little safer than doing
it from C where strictly speaking the compiler would be well within its
rights to insert a memory access between the separate asm statements we
previously had, containing sync & ll instructions respectively.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Rather than using custom SZLONG_LOG & SZLONG_MASK macros to shift & mask
a bit index to form word & bit offsets respectively, make use of the
standard BIT_WORD() & BITS_PER_LONG macros for the same purpose.
volatile is added to the definition of pointers to the long-sized word
we'll operate on, in order to prevent the compiler complaining that we
cast away the volatile qualifier of the addr argument. This should have
no effect on generated code, which in the LL/SC case is inline asm
anyway & in the non-LLSC case access is constrained by compiler barriers
provided by raw_local_irq_{save,restore}().
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Introduce __bit_op() & __test_bit_op() macros which abstract away the
implementation of LL/SC loops. This cuts down on a lot of duplicate
boilerplate code, and also allows R10000_LLSC_WAR to be handled outside
of the individual bitop functions.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
The IRQ-disabling non-LLSC fallbacks for bitops on UP systems already
return a zero or one, so there's no need to perform another comparison
against zero. Move these comparisons into the LLSC paths to avoid the
redundant work.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Use the BIT() macro in asm/bitops.h rather than open-coding its
equivalent.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
The logical operations or & xor used in the test_and_set_bit_lock(),
test_and_clear_bit() & test_and_change_bit() functions currently force
the value 1<<bit to be placed in a register. If the bit is compile-time
constant & fits within the immediate field of an or/xor instruction (ie.
16 bits) then we can make use of the ori/xori instruction variants &
avoid the use of an extra register. Add the extra "i" constraints in
order to allow use of these immediate encodings.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
The only difference between test_and_set_bit() & test_and_set_bit_lock()
is memory ordering barrier semantics - the former provides a full
barrier whilst the latter only provides acquire semantics.
We can therefore implement test_and_set_bit() in terms of
test_and_set_bit_lock() with the addition of the extra memory barrier.
Do this in order to avoid duplicating logic.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
The start position for an ins instruction is always encoded as an
immediate, so allowing registers to be used by the inline asm makes no
sense. It should never happen anyway since a bit index should always be
small enough to be treated as an immediate, but remove the nonsensical
"r" for sanity.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Rather than #ifdef on CONFIG_CPU_* to determine whether the ins
instruction is supported we can simply check MIPS_ISA_REV to discover
whether we're targeting MIPSr2 or higher. Do so in order to clean up the
code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
set_bit() can set bits 0-15 using an ori instruction, rather than
loading the value -1 into a register & then using an ins instruction.
That is, rather than the following:
li t0, -1
ll t1, 0(t2)
ins t1, t0, 4, 1
sc t1, 0(t2)
We can have the simpler:
ll t1, 0(t2)
ori t1, t1, 0x10
sc t1, 0(t2)
The or path already allows immediates to be used, so simply restricting
the ins path to bits that don't fit in immediates is sufficient to take
advantage of this.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Reorder conditions in our various bitops functions that check
kernel_uses_llsc such that they handle the !kernel_uses_llsc case first.
This allows us to avoid the need to duplicate the kernel_uses_llsc check
in all the other cases. For functions that don't involve barriers common
to the various implementations, we switch to returning from within each
if block making each case easier to read in isolation.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Remove the remaining duplication between 32b & 64b in asm/atomic.h by
making use of an ATOMIC_OPS() macro to generate:
- atomic_read()/atomic64_read()
- atomic_set()/atomic64_set()
- atomic_cmpxchg()/atomic64_cmpxchg()
- atomic_xchg()/atomic64_xchg()
This is consistent with the way all other functions in asm/atomic.h are
generated, and ensures consistency between the 32b & 64b functions.
Of note is that this results in the above now being static inline
functions rather than macros.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Unify the definitions of atomic_sub_if_positive() &
atomic64_sub_if_positive() using a macro like we do for most other
atomic functions. This allows us to share the implementation ensuring
consistency between the two. Notably this provides the appropriate
loongson3_war barriers in the atomic64_sub_if_positive() case which were
previously missing.
The code is rearranged a little to handle the !kernel_uses_llsc case
first in order to de-indent the LL/SC case & allow us not to go over 80
characters per line.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Use smp_mb__before_atomic() & smp_mb__after_atomic() in
atomic_sub_if_positive() rather than the equivalent
smp_mb__before_llsc() & smp_llsc_mb(). The former are more standard &
this preps us for avoiding redundant duplicate barriers on Loongson3 in
a later patch.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Generate the sync instructions required to workaround Loongson3 LL/SC
errata within inline asm blocks, which feels a little safer than doing
it from C where strictly speaking the compiler would be well within its
rights to insert a memory access between the separate asm statements we
previously had, containing sync & ll instructions respectively.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Cut down on duplication by generalizing the ATOMIC_OP(),
ATOMIC_OP_RETURN() & ATOMIC_FETCH_OP() macros to work for both 32b &
64b atomics, and removing the ATOMIC64_ variants. This ensures
consistency between our atomic_* & atomic64_* functions.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Handle the !kernel_uses_llsc path first in our ATOMIC_OP(),
ATOMIC_OP_RETURN() & ATOMIC_FETCH_OP() macros & return from within the
block. This allows us to de-indent the kernel_uses_llsc path by one
level which will be useful when making further changes.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
We define macros in asm/atomic.h which end each line with space
characters before a backslash to continue on the next line. Remove the
space characters leaving tabs as the whitespace used for conformity with
coding convention.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Use the new __SYNC() infrastructure to implement sync_ginv(), for
consistency with much of the rest of the asm/barrier.h.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Implement __sync() using the new __SYNC() infrastructure, which will
take care of not emitting an instruction for old R3k CPUs that don't
support it. The only behavioral difference is that __sync() will now
provide a compiler barrier on these old CPUs, but that seems like
reasonable behavior anyway.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
The definition of fast_mb() is the same in both the Octeon & non-Octeon
cases, so remove the duplication & define it only once.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
We #ifdef on Cavium Octeon CPUs, but emit the same sync instruction in
both cases. Remove the #ifdef & simply expand to the __sync() macro.
Whilst here indent the strong ordering case definitions to match the
indentation of the weak ordering ones, helping readability.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Simplify our definitions of rmb() & wmb() using the new __SYNC()
infrastructure.
The fast_rmb() & fast_wmb() macros are removed, since they only provided
a level of indirection that made the code less readable & weren't
directly used anywhere in the kernel tree.
The Octeon #ifdef'ery is removed, since the "syncw" instruction
previously used is merely an alias for "sync 4" which __SYNC() will emit
for the wmb sync type when the kernel is configured for an Octeon CPU.
Similarly __SYNC() will emit nothing for the rmb sync type in Octeon
configurations.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Introduce an asm/sync.h header which provides infrastructure that can be
used to generate sync instructions of various types, and for various
reasons. For example if we need a sync instruction that provides a full
completion barrier but only on systems which have weak memory ordering,
we can generate the appropriate assembly code using:
__SYNC(full, weak_ordering)
When the kernel is configured to run on systems with weak memory
ordering (ie. CONFIG_WEAK_ORDERING is selected) we'll emit a sync
instruction. When the kernel is configured to run on systems with strong
memory ordering (ie. CONFIG_WEAK_ORDERING is not selected) we'll emit
nothing. The caller doesn't need to know which happened - it simply says
what it needs & when, with no concern for checking the kernel
configuration.
There are some scenarios in which we may want to emit code only when we
*didn't* emit a sync instruction. For example, some Loongson3 CPUs
suffer from a bug that requires us to emit a sync instruction prior to
each ll instruction (enabled by CONFIG_CPU_LOONGSON3_WORKAROUNDS). In
cases where this bug workaround is enabled, it's wasteful to then have
more generic code emit another sync instruction to provide barriers we
need in general. A __SYNC_ELSE() macro allows for this, providing an
extra argument that contains code to be assembled only in cases where
the sync instruction was not emitted. For example if we have a scenario
in which we generally want to emit a release barrier but for affected
Loongson3 configurations upgrade that to a full completion barrier, we
can do that like so:
__SYNC_ELSE(full, loongson3_war, __SYNC(rl, always))
The assembly generated by these macros can be used either as inline
assembly or in assembly source files.
Differing types of sync as provided by MIPSr6 are defined, but currently
they all generate a full completion barrier except in kernels configured
for Cavium Octeon systems. There the wmb sync-type is used, and rmb
syncs are omitted, as has been the case since commit 6b07d38aaa
("MIPS: Octeon: Use optimized memory barrier primitives."). Using
__SYNC() with the wmb or rmb types will abstract away the Octeon
specific behavior and allow us to later clean up asm/barrier.h code that
currently includes a plethora of #ifdef's.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
When targeting MIPSr6 or higher make use of a compact branch in LL/SC
loops, preventing the insertion of a delay slot nop that only serves to
waste space.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
We currently duplicate the definition of __scbeqz in asm/atomic.h &
asm/cmpxchg.h. Move it to asm/llsc.h & rename it to __SC_BEQZ to fit
better with the existing __SC macro provided there.
We include a tab in the string in order to avoid the need for users to
indent code any further to include whitespace of their own after the
instruction mnemonic.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
This patch adds support for the GARDENA smart Gateway, which is based on
the MediaTek MT7688 SoC. It is equipped with 128 MiB of DDR and 8 MiB of
flash (SPI NOR) and additional 128MiB SPI NAND storage.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
This patch adds the I2C controller description to the MT7628A dtsi file.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
The r4k-bugs64 code will no longer be built for MIPSr6 kernel
configurations, so there's no need to perform checks for MIPSr6 within
the code. Drop those redundant checks.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Only build the checks for R4k errata workarounds if we expect that the
kernel might actually run on a system with an R4k CPU - ie.
CONFIG_SYS_HAS_CPU_R4X00=y & we're targeting a pre-MIPSr1 ISA revision.
Rename cpu-bugs64.c to r4k-bugs64.c to indicate the fact that the code
is specific to R4k CPUs.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Node ids don't need to be contiguous in Linux, so the concept to
use compact node ids to make them contiguous isn't needed at all.
This patchset therefore removes it.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Most of the SN/SN0 header files are inherited from IRIX header files,
but not all of that stuff is useful for Linux. Remove not used parts.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Commit ac7c3e4ff4 ("compiler: enable CONFIG_OPTIMIZE_INLINING
forcibly") allows compiler to uninline functions marked as 'inline'.
In cace of cmpxchg this would cause to reference function
__cmpxchg_called_with_bad_pointer, which is a error case
for catching bugs and will not happen for correct code, if
__cmpxchg is inlined.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
[paul.burton@mips.com: s/__cmpxchd/__cmpxchg in subject]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
The addr variable in prom_free_prom_memory() has been unused since
commit 0df1007677 ("MIPS: fw: Record prom memory"), leading to a
compiler warning:
arch/mips/fw/arc/memory.c:163:16:
warning: unused variable 'addr' [-Wunused-variable]
Fix this by removing the unused variable.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 0df1007677 ("MIPS: fw: Record prom memory")
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-mips@vger.kernel.org
