for 5.5, please pull the following:
- Stefan paves the way for supporting the Raspberry Pi 4 and gets rid of
a bunch of dtc checker warnings by removing incorrect
nodes/properties, moving BCM2835/6/7 specific nodes into the
appropriate DTS, converts Raspberry Pi boards to JSON schema, and
finally adds minimal Raspberry Pi 4 model B support
- Dan adds support for the Luxul XWC-2000 router based on the BCM47094 SoC
- Chris adds a proper label to the Hurricane 2 watchdog controller node
-----BEGIN PGP SIGNATURE-----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=CWof
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.5/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.5, please pull the following:
- Stefan paves the way for supporting the Raspberry Pi 4 and gets rid of
a bunch of dtc checker warnings by removing incorrect
nodes/properties, moving BCM2835/6/7 specific nodes into the
appropriate DTS, converts Raspberry Pi boards to JSON schema, and
finally adds minimal Raspberry Pi 4 model B support
- Dan adds support for the Luxul XWC-2000 router based on the BCM47094 SoC
- Chris adds a proper label to the Hurricane 2 watchdog controller node
* tag 'arm-soc/for-5.5/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm: HR2: add label to sp805 watchdog
ARM: dts: BCM5301X: Add DT for Luxul XWC-2000
arm64: dts: broadcom: Add reference to RPi 4 B
ARM: dts: Add minimal Raspberry Pi 4 support
dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema
dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema
ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi
ARM: dts: bcm283x: Remove brcm,bcm2835-pl011 compatible
ARM: dts: bcm283x: Remove simple-bus from fixed clocks
Link: https://lore.kernel.org/r/20191023212814.30622-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This allows boards the option of adding properties or disabling the
watchdog entirely.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This is a Dell Wyse thin client, variously referred to as "Ariel",
"3020" or "Tx0D" where "x" stands for the software it was shipped with.
I somewhat arbitrarily chose "ariel".
There are bits missing, because the drivers are not in and bindings are not
settled yet:
* Things missing from mmp3.dtsi:
HSIC controller and its PHY (only the internal Ethernet is connected
here, the hub with external USB2 ports is connected to the U2O controller
that works well), Vivante GC2000 GPU
* &twsi1/regulator@19
Marvell 88pm867 power regulator
* &twsi3/vga-dvi-encoder@76
Chrontel CH7033B-BF VGA & DVI encoder
* &twsi3/sound-codec@30
Sound chip, probably a Marvell 88ce156
* &twsi4/embedded-controller@58
ENE KB3930QF Embedded Controller, also seems to be connected to &ssp4.
Might not need a driver -- about the only useful thing it can do is to
reboot the machine when tickled via some GPIO lines.
Also there seems to be something at &twsi1 address 0x50.
Link: https://lore.kernel.org/r/20191022152837.3553524-1-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Most of the basic infrastructure is completed for the ARM64 S900 SoC.
It can now boot a distro from eMMC/uSD with mainline kernel. Below are
the changes for this cycle (only S900):
- Added MMC controller support for S900 SoC. There are 4 controllers in
this SoC, each capable of accessing MMC cards as well as SDIO.
- Added onboard eMMC and uSD support for 96Boards Bubblegum96 board based
on S900. Since the MMC driver is not capable of supporting SDIO currently,
it is not enabled for now. And with the absence of PMIC support, fixed
regulators are used to model the power supply.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAl2vFLgACgkQVZ8R5v6R
zvWvLAf+PU1sBy9Z97OiFKOhUooDXX8g1dKnQU7KbYKcGlbUSohxyrByblXBzxon
2b85Q8xE63eelDpRq5tCtQk6mry2q48FNltQxCj8meTipF9l+vsDSVijOPc+llCA
b8GE+xwl6FEP7mLcuJQmUmrYspSeeAi+bGWakj/8yp1wwwX+M89NvD7odBdNFpq9
+hEkgyxC4wtKhz2142ZaxlFleTAorsnrgSicOm4VtHZwbWmjgoYH0X4D9nSyWbcT
5nJZ6R6igi+BwZ683Lq87Z7NC4XebXuYmK4xYvqDPAzBwg76Jj/fgxOZsWoZMoON
+vO0tw6/EwGg1pKRWu259t0ytTwzEQ==
=f4lh
-----END PGP SIGNATURE-----
Merge tag 'actions-arm64-dt-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt
Actions Semi ARM64 changes for v5.5:
Most of the basic infrastructure is completed for the ARM64 S900 SoC.
It can now boot a distro from eMMC/uSD with mainline kernel. Below are
the changes for this cycle (only S900):
- Added MMC controller support for S900 SoC. There are 4 controllers in
this SoC, each capable of accessing MMC cards as well as SDIO.
- Added onboard eMMC and uSD support for 96Boards Bubblegum96 board based
on S900. Since the MMC driver is not capable of supporting SDIO currently,
it is not enabled for now. And with the absence of PMIC support, fixed
regulators are used to model the power supply.
* tag 'actions-arm64-dt-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
arm64: dts: actions: Add uSD and eMMC support for Bubblegum96
arm64: dts: actions: Add MMC controller support for S900
Link: https://lore.kernel.org/r/20191022145012.GB3601@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>
Add uSD and eMMC support for Bubblegum96 board based on Actions Semi
S900 SoC. SD0 is connected to uSD slot and SD2 is connected to eMMC.
Since there is no PMIC support added yet, fixed regulator has been
used as a regulator node.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add MMC controller support for Actions Semi S900 SoC. There are 4 MMC
controllers in this SoC which can be used for accessing SD/MMC/SDIO cards.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This tag includes binding documentation for various hardware found on Marvell
MMP3 SoC along a DTS file for said hardware.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEENyn6vISEy07peidTpxZjkszkJRYFAl2oekwPHGxrdW5kcmFr
QHYzLnNrAAoJEKcWY5LM5CUWLjgH/3u758cDz/ad1gdtTN/oIQtrHHwR2AmgCG5M
tO0+EYAPOsRAUDpPZF/aoFXoP3NJ2dUgHcj+hYX5S0ZuE4ijOJwSKiYZbXd9QX0+
e4iUh77CdtoTv+y6W6GjkFMnnjIfiCSm+Tby4jc9Ty/+ImBGGYSnS2fnxmyFfEBZ
eDtPZSGJJmmTJNt9UMaWaRC0sivSStzBPiwqVE/aG75askc/Fd3OOIcA9Bm8ot1E
i3T7i/PRw4q/mOgrXMvqs7BSTsgVnBOCxTClKIT6PuT9ZxkRUwWp9QTvEd/nVLs9
DrROFCaVKLXx7HHi+5CbjP88F0w61CBQXntFGMGkxx0iG6Evo8U=
=l10O
-----END PGP SIGNATURE-----
Merge tag 'mmp-dt-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp into arm/dt
ARM: Marvell MMP Device Tree patches for v5.5
This tag includes binding documentation for various hardware found on Marvell
MMP3 SoC along a DTS file for said hardware.
* tag 'mmp-dt-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp:
ARM: dts: mmp3: Add MMP3 SoC dts file
dt-bindings: phy-mmp3-usb: Add bindings
dt-bindings: mrvl,intc: Add a MMP3 interrupt controller
dt-bindings: arm: mrvl: Document MMP3 compatible string
dt-bindings: arm: Convert Marvell MMP board/soc bindings to json-schema
dt-bindings: arm: cpu: Add Marvell MMP3 SMP enable method
Link: https://lore.kernel.org/r/d4897c4a92319527c46147244282803cd9f5a1ff.camel@v3.sk
Signed-off-by: Olof Johansson <olof@lixom.net>
Add bindings and update device tree sources of Exynos5422 platforms with
new Dynamic Memory Controller nodes and properties.
-----BEGIN PGP SIGNATURE-----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=uqu5
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-dmc-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS changes for DMC driver for v5.5
Add bindings and update device tree sources of Exynos5422 platforms with
new Dynamic Memory Controller nodes and properties.
* tag 'samsung-dt-dmc-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: memory-controllers: exynos5422-dmc: Correct example syntax and memory region
ARM: dts: exynos: Add interrupts to DMC controller in Exynos5422
ARM: dts: exynos: Extend mapped region for DMC on Exynos5422
dt-bindings: memory-controllers: exynos5422-dmc: Add interrupt mode
dt-bindings: ddr: Add bindings for Samsung LPDDR3 memories
ARM: dts: exynos: Add DMC device to Exynos5422 and Odroid XU3-family boards
ARM: dts: exynos: Add syscon compatible to clock controller on Exynos542x
dt-bindings: memory-controllers: Add Exynos5422 DMC device description
dt-bindings: ddr: Add bindings for LPDDR3 memories
dt-bindings: ddr: Rename lpddr2 directory
Link: https://lore.kernel.org/r/20191021180453.29455-6-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Fix boot of Exynos7 due to wrong address/size of memory node,
2. Move GPU under /soc node,
3. Minor of DT bindings.
-----BEGIN PGP SIGNATURE-----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=tNpa
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.5
1. Fix boot of Exynos7 due to wrong address/size of memory node,
2. Move GPU under /soc node,
3. Minor of DT bindings.
* tag 'samsung-dt64-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Rename Multi Core Timer node to "timer" on Exynos5433
arm64: dts: exynos: Split phandle in dmas property on Exynos5433
arm64: dts: exynos: Swap clock order of sysmmu on Exynos5433
arm64: dts: exynos: Revert "Remove unneeded address space mapping for soc node"
arm64: dts: exynos: Move GPU under /soc node for Exynos7
arm64: dts: exynos: Move GPU under /soc node for Exynos5433
Link: https://lore.kernel.org/r/20191021180453.29455-5-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Add ARM architected timers on Exynos5 for KVM-based virtualization,
2. Extend chip identification needed for future Adaptive Supply Voltage,
3. Add audio support to Arndale board,
4. Fix init order of clock providers on s3c64xx,
5. A lot of cleanups and adjustments of DTS with DT schema.
-----BEGIN PGP SIGNATURE-----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=Ri1S
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.5
1. Add ARM architected timers on Exynos5 for KVM-based virtualization,
2. Extend chip identification needed for future Adaptive Supply Voltage,
3. Add audio support to Arndale board,
4. Fix init order of clock providers on s3c64xx,
5. A lot of cleanups and adjustments of DTS with DT schema.
* tag 'samsung-dt-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s3c64xx: Fix init order of clock providers
ARM: dts: exynos: Rename SysRAM node to "sram"
ARM: dts: exynos: Rename power domain nodes to "power-domain" in Exynos4
ARM: dts: exynos: Add audio support (WM1811 CODEC boards) to Arndale board
ARM: dts: exynos: Use defines for MCT interrupt GIC SPI/PPI specifier
ARM: dts: exynos: Remove MCT subnode for interrupt map on Exynos54xx
ARM: dts: exynos: Remove MCT subnode for interrupt map on Exynos5250
ARM: dts: exynos: Remove MCT subnode for interrupt map on Exynos4412
ARM: dts: exynos: Remove MCT subnode for interrupt map on Exynos4210
ARM: dts: exynos: Rename Multi Core Timer node to "timer"
ARM: dts: exynos: Split phandle in dmas property
ARM: dts: exynos: Remove obsolete IRQ lines on Exynos3250
ARM: dts: exynos: Add samsung,asv-bin property to Odroid XU3 Lite
ARM: dts: exynos: Add "syscon" compatible string to chipid node on Exynos5
ARM: dts: exynos: Add support ARM architected timers on Exynos5
Link: https://lore.kernel.org/r/20191021180453.29455-4-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
power-tree improvements ofr the roc-rk3399-pc, after a long wait
also support for the CR50 TPM device found on some RK3399-Gru devices,
some audio and gmac improvements for NanoPi4 and Rockpro64 as well
as marking the redundant RK_FUNC_x -> x mapping as deprecated and
fixing a missing #msi-cells on rk3399.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl2tn3IQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgRQcB/4zxlsdUJbwmocLmZadCfBYII1QKdeh2kcr
u4D1T3KuxFjLPCjDcIdZ94+i8iruvXDjPi/PYGBQc63RQmgTud1woEmL5NxBsNOe
TJm9VOHKbkIYxnwSfrkBNTgtmKvxl6H0VWXpUA85f01s7HDAPnk+/8p37Vm22mIa
+MJy6dFHN2/jM6PC9E0rMmS4GEn90b7US0SRHHu2ENtZTH9qKWPW5+9RUqkgQsnl
qvnopEervmbQ0Di50L1KTaeEnzzCgbclc95rGMWmsUwAXe6gS9UmKuVlSogHCSP3
u4h6gsCPW4IwV4lkYVVubDn3eB0r0T8FUSdNIGUqZ0KYPYgPClun
=BXS2
-----END PGP SIGNATURE-----
Merge tag 'v5.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
A lot of improvements for the (till now) somewhat dormant px30 soc,
power-tree improvements ofr the roc-rk3399-pc, after a long wait
also support for the CR50 TPM device found on some RK3399-Gru devices,
some audio and gmac improvements for NanoPi4 and Rockpro64 as well
as marking the redundant RK_FUNC_x -> x mapping as deprecated and
fixing a missing #msi-cells on rk3399.
* tag 'v5.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
include: dt-bindings: rockchip: mark RK_FUNC defines as deprecated
arm64: dts: rockchip: restyle rockchip,pins on rk3399-rock-pi-4
arm64: dts: rockchip: Update nanopi4 phy reset properties
arm64: dts: rockchip: Enable nanopi4 HDMI audio
arm64: dts: rockchip: add cr50 tpm to rk3399-gru scarlet and bob
arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64
arm64: dts: rockchip: add missing #msi-cells to rk3399
arm64: dts: rockchip: Fix roc-rk3399-pc regulator input rails
arm64: dts: rockchip: Rename vcc12v_sys into dc_12v for roc-rk3399-pc
dt-bindings: document PX30 usb2phy General Register Files
arm64: dts: rockchip: add px30-evb i2c1 devices
arm64: dts: rockchip: document explicit px30 cru dependencies
arm64: dts: rockchip: remove unused pin settings from px30
arm64: dts: rockchip: move px30-evb console output to uart 5
arm64: dts: rockchip: add emmc-powersequence to px30-evb
arm64: dts: rockchip: fix the px30-evb power tree
arm64: dts: rockchip: add default px30 emmc pinctrl
arm64: dts: rockchip: remove px30 emmc_pwren pinctrl
arm64: dts: rockchip: remove static xin32k from px30
arm64: dts: rockchip: fix iface clock-name on px30 iommus
Link: https://lore.kernel.org/r/1650793.YZj09CGBNl@phil
Signed-off-by: Olof Johansson <olof@lixom.net>
the cpuid found in the efuses. Veyron display got a cleanup to use the
interpolated backlight values instead of declaring huge tables
and finally a cleanup fixing some tabs/spaces issues in the dts files.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl2tnOcQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgW+GCACYHiRGotnJibFu4gCerBoISP13qzqQnpYR
VSYnR84pD/cOzDas8PKOkPUg9+Db5fsDN1NPAp/S0vyirye5jgjQFlWNK7+o04Qr
JnLJYv1OlhkRiipuTJesiMo4mIOpiJWvliU050pmfzTJihZwBocw9FUqllq/V14A
WwNhcGIhZxEB+GkKkpFj7PZXSkTQy3PwmWZEAL2C9U2qHL4Vszlmo1P0AAx9af0S
8FCY1OhVSZ/C732k/aijmg7tm70uBwKeBz1Kn/Rh/AiI34yzUufxnPojQstlLkRt
pJnTypt0nc/1Gxt16So/4HjTfuIdT2pK6Q9t71VNbQl/3ogKE2Oj
=r5X+
-----END PGP SIGNATURE-----
Merge tag 'v5.5-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New rk3288 features are Gamma support for the VOPs as well as declaring
the cpuid found in the efuses. Veyron display got a cleanup to use the
interpolated backlight values instead of declaring huge tables
and finally a cleanup fixing some tabs/spaces issues in the dts files.
* tag 'v5.5-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: remove some tabs and spaces from dtsi files
ARM: dts: rockchip: Add RK3288 VOP gamma LUT address
ARM: dts: rockchip: Use interpolated brightness tables for veyron
ARM: dts: rockchip: Add cpu id to rk3288 efuse node
Link: https://lore.kernel.org/r/1770986.Em1ahGqaF7@phil
Signed-off-by: Olof Johansson <olof@lixom.net>
- RZ/G2M update for the Renesas Timer Unit bindings,
- Support for the new RZ/G2N (r8a774b1) SoC and the HiHope RZ/G2N
board.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXamGMgAKCRCKwlD9ZEnx
cIt4AP9/R+sbbPYod9cDmSBMqUEXSC5tBcnC/V5+bsmnGfBbZgEA0hfLI0qtHecy
pdiSv++JmG60MGT9ZtOi96eY89Wd3gE=
=Q5jw
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.5
- RZ/G2M update for the Renesas Timer Unit bindings,
- Support for the new RZ/G2N (r8a774b1) SoC and the HiHope RZ/G2N
board.
* tag 'renesas-dt-bindings-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: reset: rcar-rst: Document r8a774b1 reset module
dt-bindings: power: rcar-sysc: Document r8a774b1 sysc
dt-bindings: arm: renesas: Add HopeRun RZ/G2N boards
dt-bindings: arm: renesas: Document RZ/G2N SoC DT bindings
dt-bindings: timer: renesas: tmu: Document r8a774a1 bindings
Link: https://lore.kernel.org/r/20191018101136.26350-6-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- Support for the RZ/G2N (r8a774b1) SoC and the HiHope RZ/G2N board,
- CPU idle support for R-Car H3 and M3-W,
- LVDS and backlight support on the HiHope RZ/G2M and RZ/G2N boards,
with Advantech idk-1110wr LVDS panel,
- Minor fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXamBWQAKCRCKwlD9ZEnx
cFJdAQDBJGdpQ77OMn/aIcQHIe/+8v8wUTWZ9VXHHyqU6rgo9QD/aVfq4EI+iwOC
SP/eoNqLU3tLlavmvXAekfDvdsJmOQg=
=UxTs
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM64 DT updates for v5.5
- Support for the RZ/G2N (r8a774b1) SoC and the HiHope RZ/G2N board,
- CPU idle support for R-Car H3 and M3-W,
- LVDS and backlight support on the HiHope RZ/G2M and RZ/G2N boards,
with Advantech idk-1110wr LVDS panel,
- Minor fixes and improvements.
* tag 'renesas-arm64-dt-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (50 commits)
arm64: dts: renesas: r8a774b1: Add CAN and CAN FD support
arm64: dts: renesas: Add iommus to R-Car Gen3 SDHI/MMC nodes
arm64: dts: renesas: r8a774b1: Add INTC-EX device node
arm64: dts: renesas: r8a774b1: Add USB3.0 device nodes
arm64: dts: renesas: r8a774b1: Add USB-DMAC and HSUSB device nodes
arm64: dts: renesas: r8a774b1: Add USB2.0 phy and host (EHCI/OHCI) device nodes
arm64: dts: renesas: r8a774b1: Add Sound and Audio DMAC device nodes
arm64: dts: renesas: hihope-rzg2-ex: Let the board specific DT decide about pciec1
arm64: dts: renesas: r8a774b1: Add PCIe device nodes
arm64: dts: renesas: r8a774b1: Add all MSIOF nodes
arm64: dts: renesas: r8a774b1: Add RWDT node
arm64: dts: renesas: Add support for Advantech idk-1110wr LVDS panel
arm64: dts: renesas: hihope-rzg2-ex: Add LVDS support
arm64: dts: renesas: hihope-rzg2-ex: Enable backlight
arm64: dts: renesas: r8a774b1: Add PWM device nodes
arm64: dts: renesas: r8a774b1: Add FDP1 device nodes
arm64: dts: renesas: r8a774b1-hihope-rzg2n: Add display clock properties
arm64: dts: renesas: r8a774b1: Add HDMI encoder instance
arm64: dts: renesas: r8a774b1: Add DU device to DT
arm64: dts: renesas: hihope-common: Move du clk properties out of common dtsi
...
Link: https://lore.kernel.org/r/20191018101136.26350-4-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Describes most of the hardware found on Marvell MMP3, aka PXA2128, aka
Armada 620. Missing bits are the LCD controller, HSIC controllers,
Audio and GPU. Will be completed once bindings and drivers settle.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Similar to MMP2 one, but has an extra range for the other core. The
muxes stay the same.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Marvel MMP3 is a successor to MMP2, containing similar peripherals with two
PJ4B cores.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Convert Marvell MMP SoC bindings to DT schema format using json-schema.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Add the enable method for the second PJ4B core of the Marvell MMP3 SoC.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
The defines RK_FUNC_1, RK_FUNC_2, RK_FUNC_3 and RK_FUNC_4
are no longer used. Mark them as "deprecated"
to prevent that someone start using them again.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20191015205852.4200-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
It's a simple network device based on BCM47094 with just a single
Ethernet port.
Signed-off-by: Dan Haab <dan.haab@legrand.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
RK3288 SoC VOPs have optional support Gamma LUT setting,
which requires specifying the Gamma LUT address in the devicetree.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191010194351.17940-4-ezequiel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Use interpolated brightness tables (added by commit 573fe6d1c2
("backlight: pwm_bl: Linear interpolation between
brightness-levels") for veyron, instead of specifying every single
step. Some devices/panels have intervals that are smaller than
the specified 'num-interpolated-steps', the driver interprets
these intervals as a single step.
Another option would be to switch to a perceptual brightness curve
(CIE 1931), with the caveat that it would change the behavior of
the backlight. Also the concept of a minimum brightness level is
currently not supported for CIE 1931 curves.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191003094137.v2.1.Ic9fd698810ea569c465350154da40b85d24f805b@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Scarlet and Bob use the Google-developed cr50 chip to do things
like TPM and closed-case-debugging.
Add the nodes describing the cr50 and its spi-connection.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20180822120925.12388-1-heiko@sntech.de
This adds a reference to the dts of the Raspberry Pi 4 B,
so we don't need to maintain the content in arm64.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
This adds minimal support for the new Raspberry Pi 4 without the
fancy stuff like GENET, PCIe, xHCI, 40 bit DMA and V3D. The RPi 4 is
available in 3 different variants (1, 2 and 4 GB RAM), so leave the memory
size to zero and let the bootloader take care of it. The DWC2 is still
usable as peripheral via the USB-C port.
Other differences to the Raspberry Pi 3:
- additional GIC 400 Interrupt controller
- new thermal IP and HWRNG
- additional MMC interface (emmc2)
- additional UART, I2C, SPI and PWM interfaces
- clock stretching bug in I2C IP has been fixed
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Florian Fanelli <f.fainelli@gmail.com>
Add new Raspberry Pi 4 to DT schema.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Convert the BCM2835/6/7 SoC bindings to DT schema format using json-schema.
All the other Broadcom boards are maintained by Florian Fainelli.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Herring <robh@kernel.org>
As preparation we want all common BCM2711 + BCM2835/6/7 functions in
bcm283x.dtsi and all BCM2835/6/7 specific in the new
bcm2835-common.dtsi. Since i2c2 is BCM2835 specific, we also need
to move it to bcm2835-common.dtsi.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Eric Anholt <eric@anholt.net>
The fixed clocks doesn't form some kind of bus. So let's remove it.
This fixes the follow DT schema warnings:
clocks: clock@3:reg:0: [3] is too short
clocks: clock@4:reg:0: [4] is too short
clocks: $nodename:0: 'clocks' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: 'ranges' is a required property
clock@3: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
clock@4: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
The plan for the HiHope RZ/G2N board is to enable pciec0 by default,
and use pciec1 physical interface for SATA (as SATA and PCIE1 share
the same physical interface), therefore move pciec1 enabling away
from hihope-rzg2-ex.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Link: https://lore.kernel.org/r/1570178133-21532-8-git-send-email-fabrizio.castro@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds support for Advantech idk-1110wr LVDS panel.
The HiHope RZ/G2[MN] is advertised as compatible with panel
idk-1110wr from Advantech, however the panel isn't sold alongside
the board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/1570029619-43238-10-git-send-email-biju.das@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
