AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-17 15:06:02 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

This pull request contains Broadcom ARM-based SoCs Device Tree updates

Browse Source 
for 5.5, please pull the following:
 
 - Stefan paves the way for supporting the Raspberry Pi 4 and gets rid of
   a bunch of dtc checker warnings by removing incorrect
   nodes/properties, moving BCM2835/6/7 specific nodes into the
   appropriate DTS, converts Raspberry Pi boards to JSON schema, and
   finally adds minimal Raspberry Pi 4 model B support
 
 - Dan adds support for the Luxul XWC-2000 router based on the BCM47094 SoC
 
 - Chris adds a proper label to the Hurricane 2 watchdog controller node
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl2wpM0ACgkQh9CWnEQH
 BwQf0RAAhvYUYVmhCWjNSW5sien2GrPjayDan8D0MD66VvWqeF56UzENC4ab2Yax
 fFNY8+CBKAVvIs4k2rIl50epb7eUEzDDw32g8rFJTqnLw0ZBTMxpNs1H2OjgEEz5
 ewP9wkyxsgMhS43DdD/4xZvjonce4xEyloSG8S/o3uVceokEWX72Hcqo9lol5uB2
 sFv8aBsavYWopCo0iG9AU3ZifHpz3LWTwS4uFyxJTj4T9kVd+W3WAqDgZKkGHd1U
 YqCytE8Zqo56QsDExWuN0QzakXTz59xEi2jIkALZuQOhJH7yGjiGZZpaooAWzrVU
 ks1eCCm4s1vrbo4/DL72tJ7yhy7nWTIvdZTLv4nWcLWYm76U6cQ++MwcGA66CMgr
 AWAIbu/eFCcZxdNsusrx2CwFsvfpRsn3qEFbD9HkUqMIgrv6MNQ4FbrTOLqQOg64
 1mWhuY8htz9avmav7E2XFMnTIUfFaYqvRM3OoS3h3Zh0u3TK68Q1qFA91guEu6ko
 y2TRiFUaUPwcv4l/kRaWZ1cNsnX2FJggJ5hmsIdvRx7/9LhukGPb0BJFmuUDFm1X
 WTTPRB0WX06NzxkH0YQZCnz/5YvKaSGmCxQ7mcAw0KZ66rcVNJiPk5EdukkU7g60
 ZOtVIxJXja7JEJ3T+7frei10LhayCL2/0e4eQFMFgdFzm2KtIHQ=
 =CWof
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.5/devicetree' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.5, please pull the following:

- Stefan paves the way for supporting the Raspberry Pi 4 and gets rid of
  a bunch of dtc checker warnings by removing incorrect
  nodes/properties, moving BCM2835/6/7 specific nodes into the
  appropriate DTS, converts Raspberry Pi boards to JSON schema, and
  finally adds minimal Raspberry Pi 4 model B support

- Dan adds support for the Luxul XWC-2000 router based on the BCM47094 SoC

- Chris adds a proper label to the Hurricane 2 watchdog controller node

* tag 'arm-soc/for-5.5/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm: HR2: add label to sp805 watchdog
  ARM: dts: BCM5301X: Add DT for Luxul XWC-2000
  arm64: dts: broadcom: Add reference to RPi 4 B
  ARM: dts: Add minimal Raspberry Pi 4 support
  dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema
  dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema
  ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi
  ARM: dts: bcm283x: Remove brcm,bcm2835-pl011 compatible
  ARM: dts: bcm283x: Remove simple-bus from fixed clocks

Link: https://lore.kernel.org/r/20191023212814.30622-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2019-10-23 19:59:54 -07:00
commit 71dd33b901
16 changed files with 1291 additions and 257 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

54
Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml Normal file
View File

@ -0,0 +1,54 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/bcm/bcm2835.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom BCM2711/BCM2835 Platforms Device Tree Bindings
maintainers:
- Eric Anholt <eric@anholt.net>
- Stefan Wahren <wahrenst@gmx.net>
properties:
$nodename:
const: '/'
compatible:
oneOf:
- description: BCM2711 based Boards
items:
- enum:
- raspberrypi,4-model-b
- const: brcm,bcm2711
- description: BCM2835 based Boards
items:
- enum:
- raspberrypi,model-a
- raspberrypi,model-a-plus
- raspberrypi,model-b
- raspberrypi,model-b-i2c0 # Raspberry Pi Model B (no P5)
- raspberrypi,model-b-rev2
- raspberrypi,model-b-plus
- raspberrypi,compute-module
- raspberrypi,model-zero
- raspberrypi,model-zero-w
- const: brcm,bcm2835
- description: BCM2836 based Boards
items:
- enum:
- raspberrypi,2-model-b
- const: brcm,bcm2836
- description: BCM2837 based Boards
items:
- enum:
- raspberrypi,3-model-a-plus
- raspberrypi,3-model-b
- raspberrypi,3-model-b-plus
- raspberrypi,3-compute-module
- raspberrypi,3-compute-module-lite
- const: brcm,bcm2837
...

67
Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
View File

@ -1,67 +0,0 @@
Broadcom BCM2835 device tree bindings
-------------------------------------------
Raspberry Pi Model A
Required root node properties:
compatible = "raspberrypi,model-a", "brcm,bcm2835";
Raspberry Pi Model A+
Required root node properties:
compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
Raspberry Pi Model B
Required root node properties:
compatible = "raspberrypi,model-b", "brcm,bcm2835";
Raspberry Pi Model B (no P5)
early model B with I2C0 rather than I2C1 routed to the expansion header
Required root node properties:
compatible = "raspberrypi,model-b-i2c0", "brcm,bcm2835";
Raspberry Pi Model B rev2
Required root node properties:
compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
Raspberry Pi Model B+
Required root node properties:
compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
Raspberry Pi 2 Model B
Required root node properties:
compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
Raspberry Pi 3 Model A+
Required root node properties:
compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
Raspberry Pi 3 Model B
Required root node properties:
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
Raspberry Pi 3 Model B+
Required root node properties:
compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
Raspberry Pi Compute Module
Required root node properties:
compatible = "raspberrypi,compute-module", "brcm,bcm2835";
Raspberry Pi Compute Module 3
Required root node properties:
compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
Raspberry Pi Compute Module 3 Lite
Required root node properties:
compatible = "raspberrypi,3-compute-module-lite", "brcm,bcm2837";
Raspberry Pi Zero
Required root node properties:
compatible = "raspberrypi,model-zero", "brcm,bcm2835";
Raspberry Pi Zero W
Required root node properties:
compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
Generic BCM2835 board
Required root node properties:
compatible = "brcm,bcm2835";

2
arch/arm/boot/dts/Makefile
View File

@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
bcm2837-rpi-cm3-io3.dtb \
bcm2711-rpi-4-b.dtb \
bcm2835-rpi-zero.dtb \
bcm2835-rpi-zero-w.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
@ -113,6 +114,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-luxul-abr-4500.dtb \
bcm47094-luxul-xap-1610.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwc-2000.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-luxul-xwr-3150-v1.dtb \
bcm47094-netgear-r8500.dtb \

2
arch/arm/boot/dts/bcm-hr2.dtsi
View File

@ -268,7 +268,7 @@ i2c0: i2c@38000 {
clock-frequency = <100000>;
};
watchdog@39000 {
watchdog: watchdog@39000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x39000 0x1000>;
interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;

123
arch/arm/boot/dts/bcm2711-rpi-4-b.dts Normal file
View File

@ -0,0 +1,123 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "bcm2711.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-usb-peripheral.dtsi"
/ {
compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
model = "Raspberry Pi 4 Model B";
chosen {
/* 8250 auxiliary UART instead of pl011 */
stdout-path = "serial1:115200n8";
};
/* Will be filled by the bootloader */
memory@0 {
device_type = "memory";
reg = <0 0 0>;
};
leds {
act {
gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
};
pwr {
label = "PWR";
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
};
};
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
};
sd_io_1v8_reg: sd_io_1v8_reg {
compatible = "regulator-gpio";
regulator-name = "vdd-sd-io";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
regulator-settling-time-us = <5000>;
gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
states = <1800000 0x1
3300000 0x0>;
status = "okay";
};
};
&firmware {
expgpio: gpio {
compatible = "raspberrypi,firmware-gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "BT_ON",
"WL_ON",
"PWR_LED_OFF",
"GLOBAL_RESET",
"VDD_SD_IO_SEL",
"CAM_GPIO",
"",
"";
status = "okay";
};
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
status = "okay";
};
/* SDHCI is used to control the SDIO for wireless */
&sdhci {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_gpio34>;
bus-width = <4>;
non-removable;
mmc-pwrseq = <&wifi_pwrseq>;
status = "okay";
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
/* EMMC2 is used to drive the SD card */
&emmc2 {
vqmmc-supply = <&sd_io_1v8_reg>;
broken-cd;
status = "okay";
};
/* uart0 communicates with the BT module */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <2000000>;
shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
};
};
/* uart1 is mapped to the pin header */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_gpio14>;
status = "okay";
};
&vchiq {
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
};

844
arch/arm/boot/dts/bcm2711.dtsi Normal file
View File

@ -0,0 +1,844 @@
// SPDX-License-Identifier: GPL-2.0
#include "bcm283x.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/bcm2835-pm.h>
/ {
compatible = "brcm,bcm2711";
#address-cells = <2>;
#size-cells = <1>;
interrupt-parent = <&gicv2>;
soc {
/*
* Defined ranges:
* Common BCM283x peripherals
* BCM2711-specific peripherals
* ARM-local peripherals
*/
ranges = <0x7e000000 0x0 0xfe000000 0x01800000>,
<0x7c000000 0x0 0xfc000000 0x02000000>,
<0x40000000 0x0 0xff800000 0x00800000>;
/* Emulate a contiguous 30-bit address range for DMA */
dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>;
/*
* This node is the provider for the enable-method for
* bringing up secondary cores.
*/
local_intc: local_intc@40000000 {
compatible = "brcm,bcm2836-l1-intc";
reg = <0x40000000 0x100>;
};
gicv2: interrupt-controller@40041000 {
interrupt-controller;
#interrupt-cells = <3>;
compatible = "arm,gic-400";
reg = <0x40041000 0x1000>,
<0x40042000 0x2000>,
<0x40044000 0x2000>,
<0x40046000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
};
dma: dma@7e007000 {
compatible = "brcm,bcm2835-dma";
reg = <0x7e007000 0xb00>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
/* DMA lite 7 - 10 */
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "dma0",
"dma1",
"dma2",
"dma3",
"dma4",
"dma5",
"dma6",
"dma7",
"dma8",
"dma9",
"dma10";
#dma-cells = <1>;
brcm,dma-channel-mask = <0x07f5>;
};
pm: watchdog@7e100000 {
compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
#power-domain-cells = <1>;
#reset-cells = <1>;
reg = <0x7e100000 0x114>,
<0x7e00a000 0x24>,
<0x7ec11000 0x20>;
clocks = <&clocks BCM2835_CLOCK_V3D>,
<&clocks BCM2835_CLOCK_PERI_IMAGE>,
<&clocks BCM2835_CLOCK_H264>,
<&clocks BCM2835_CLOCK_ISP>;
clock-names = "v3d", "peri_image", "h264", "isp";
system-power-controller;
};
rng@7e104000 {
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
/* RNG is incompatible with brcm,bcm2835-rng */
status = "disabled";
};
uart2: serial@7e201400 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x7e201400 0x200>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clocks BCM2835_CLOCK_UART>,
<&clocks BCM2835_CLOCK_VPU>;
clock-names = "uartclk", "apb_pclk";
arm,primecell-periphid = <0x00241011>;
status = "disabled";
};
uart3: serial@7e201600 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x7e201600 0x200>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clocks BCM2835_CLOCK_UART>,
<&clocks BCM2835_CLOCK_VPU>;
clock-names = "uartclk", "apb_pclk";
arm,primecell-periphid = <0x00241011>;
status = "disabled";
};
uart4: serial@7e201800 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x7e201800 0x200>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clocks BCM2835_CLOCK_UART>,
<&clocks BCM2835_CLOCK_VPU>;
clock-names = "uartclk", "apb_pclk";
arm,primecell-periphid = <0x00241011>;
status = "disabled";
};
uart5: serial@7e201a00 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x7e201a00 0x200>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clocks BCM2835_CLOCK_UART>,
<&clocks BCM2835_CLOCK_VPU>;
clock-names = "uartclk", "apb_pclk";
arm,primecell-periphid = <0x00241011>;
status = "disabled";
};
spi3: spi@7e204600 {
compatible = "brcm,bcm2835-spi";
reg = <0x7e204600 0x0200>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi4: spi@7e204800 {
compatible = "brcm,bcm2835-spi";
reg = <0x7e204800 0x0200>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi5: spi@7e204a00 {
compatible = "brcm,bcm2835-spi";
reg = <0x7e204a00 0x0200>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi6: spi@7e204c00 {
compatible = "brcm,bcm2835-spi";
reg = <0x7e204c00 0x0200>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c@7e205600 {
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
reg = <0x7e205600 0x200>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c4: i2c@7e205800 {
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
reg = <0x7e205800 0x200>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c5: i2c@7e205a00 {
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
reg = <0x7e205a00 0x200>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c6: i2c@7e205c00 {
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
reg = <0x7e205c00 0x200>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
pwm1: pwm@7e20c800 {
compatible = "brcm,bcm2835-pwm";
reg = <0x7e20c800 0x28>;
clocks = <&clocks BCM2835_CLOCK_PWM>;
assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
assigned-clock-rates = <10000000>;
#pwm-cells = <2>;
status = "disabled";
};
emmc2: emmc2@7e340000 {
compatible = "brcm,bcm2711-emmc2";
reg = <0x7e340000 0x100>;
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clocks BCM2711_CLOCK_EMMC2>;
status = "disabled";
};
hvs@7e400000 {
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
};
};
arm-pmu {
compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>;
/* This only applies to the ARMv7 stub */
arm,cpu-registers-not-fw-configured;
};
cpus: cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000d8>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e0>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e8>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000f0>;
};
};
};
&clk_osc {
clock-frequency = <54000000>;
};
&clocks {
compatible = "brcm,bcm2711-cprman";
};
&cpu_thermal {
coefficients = <(-487) 410040>;
};
&dsi0 {
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
};
&dsi1 {
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio {
compatible = "brcm,bcm2711-gpio";
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
gpclk0_gpio49: gpclk0_gpio49 {
pin-gpclk {
pins = "gpio49";
function = "alt1";
bias-disable;
};
};
gpclk1_gpio50: gpclk1_gpio50 {
pin-gpclk {
pins = "gpio50";
function = "alt1";
bias-disable;
};
};
gpclk2_gpio51: gpclk2_gpio51 {
pin-gpclk {
pins = "gpio51";
function = "alt1";
bias-disable;
};
};
i2c0_gpio46: i2c0_gpio46 {
pin-sda {
function = "alt0";
pins = "gpio46";
bias-pull-up;
};
pin-scl {
function = "alt0";
pins = "gpio47";
bias-disable;
};
};
i2c1_gpio46: i2c1_gpio46 {
pin-sda {
function = "alt1";
pins = "gpio46";
bias-pull-up;
};
pin-scl {
function = "alt1";
pins = "gpio47";
bias-disable;
};
};
i2c3_gpio2: i2c3_gpio2 {
pin-sda {
function = "alt5";
pins = "gpio2";
bias-pull-up;
};
pin-scl {
function = "alt5";
pins = "gpio3";
bias-disable;
};
};
i2c3_gpio4: i2c3_gpio4 {
pin-sda {
function = "alt5";
pins = "gpio4";
bias-pull-up;
};
pin-scl {
function = "alt5";
pins = "gpio5";
bias-disable;
};
};
i2c4_gpio6: i2c4_gpio6 {
pin-sda {
function = "alt5";
pins = "gpio6";
bias-pull-up;
};
pin-scl {
function = "alt5";
pins = "gpio7";
bias-disable;
};
};
i2c4_gpio8: i2c4_gpio8 {
pin-sda {
function = "alt5";
pins = "gpio8";
bias-pull-up;
};
pin-scl {
function = "alt5";
pins = "gpio9";
bias-disable;
};
};
i2c5_gpio10: i2c5_gpio10 {
pin-sda {
function = "alt5";
pins = "gpio10";
bias-pull-up;
};
pin-scl {
function = "alt5";
pins = "gpio11";
bias-disable;
};
};
i2c5_gpio12: i2c5_gpio12 {
pin-sda {
function = "alt5";
pins = "gpio12";
bias-pull-up;
};
pin-scl {
function = "alt5";
pins = "gpio13";
bias-disable;
};
};
i2c6_gpio0: i2c6_gpio0 {
pin-sda {
function = "alt5";
pins = "gpio0";
bias-pull-up;
};
pin-scl {
function = "alt5";
pins = "gpio1";
bias-disable;
};
};
i2c6_gpio22: i2c6_gpio22 {
pin-sda {
function = "alt5";
pins = "gpio22";
bias-pull-up;
};
pin-scl {
function = "alt5";
pins = "gpio23";
bias-disable;
};
};
i2c_slave_gpio8: i2c_slave_gpio8 {
pins-i2c-slave {
pins = "gpio8",
"gpio9",
"gpio10",
"gpio11";
function = "alt3";
};
};
jtag_gpio48: jtag_gpio48 {
pins-jtag {
pins = "gpio48",
"gpio49",
"gpio50",
"gpio51",
"gpio52",
"gpio53";
function = "alt4";
};
};
mii_gpio28: mii_gpio28 {
pins-mii {
pins = "gpio28",
"gpio29",
"gpio30",
"gpio31";
function = "alt4";
};
};
mii_gpio36: mii_gpio36 {
pins-mii {
pins = "gpio36",
"gpio37",
"gpio38",
"gpio39";
function = "alt5";
};
};
pcm_gpio50: pcm_gpio50 {
pins-pcm {
pins = "gpio50",
"gpio51",
"gpio52",
"gpio53";
function = "alt2";
};
};
pwm0_0_gpio12: pwm0_0_gpio12 {
pin-pwm {
pins = "gpio12";
function = "alt0";
bias-disable;
};
};
pwm0_0_gpio18: pwm0_0_gpio18 {
pin-pwm {
pins = "gpio18";
function = "alt5";
bias-disable;
};
};
pwm1_0_gpio40: pwm1_0_gpio40 {
pin-pwm {
pins = "gpio40";
function = "alt0";
bias-disable;
};
};
pwm0_1_gpio13: pwm0_1_gpio13 {
pin-pwm {
pins = "gpio13";
function = "alt0";
bias-disable;
};
};
pwm0_1_gpio19: pwm0_1_gpio19 {
pin-pwm {
pins = "gpio19";
function = "alt5";
bias-disable;
};
};
pwm1_1_gpio41: pwm1_1_gpio41 {
pin-pwm {
pins = "gpio41";
function = "alt0";
bias-disable;
};
};
pwm0_1_gpio45: pwm0_1_gpio45 {
pin-pwm {
pins = "gpio45";
function = "alt0";
bias-disable;
};
};
pwm0_0_gpio52: pwm0_0_gpio52 {
pin-pwm {
pins = "gpio52";
function = "alt1";
bias-disable;
};
};
pwm0_1_gpio53: pwm0_1_gpio53 {
pin-pwm {
pins = "gpio53";
function = "alt1";
bias-disable;
};
};
rgmii_gpio35: rgmii_gpio35 {
pin-start-stop {
pins = "gpio35";
function = "alt4";
};
pin-rx-ok {
pins = "gpio36";
function = "alt4";
};
};
rgmii_irq_gpio34: rgmii_irq_gpio34 {
pin-irq {
pins = "gpio34";
function = "alt5";
};
};
rgmii_irq_gpio39: rgmii_irq_gpio39 {
pin-irq {
pins = "gpio39";
function = "alt4";
};
};
rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
pins-mdio {
pins = "gpio28",
"gpio29";
function = "alt5";
};
};
rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
pins-mdio {
pins = "gpio37",
"gpio38";
function = "alt4";
};
};
spi0_gpio46: spi0_gpio46 {
pins-spi {
pins = "gpio46",
"gpio47",
"gpio48",
"gpio49";
function = "alt2";
};
};
spi2_gpio46: spi2_gpio46 {
pins-spi {
pins = "gpio46",
"gpio47",
"gpio48",
"gpio49",
"gpio50";
function = "alt5";
};
};
spi3_gpio0: spi3_gpio0 {
pins-spi {
pins = "gpio0",
"gpio1",
"gpio2",
"gpio3";
function = "alt3";
};
};
spi4_gpio4: spi4_gpio4 {
pins-spi {
pins = "gpio4",
"gpio5",
"gpio6",
"gpio7";
function = "alt3";
};
};
spi5_gpio12: spi5_gpio12 {
pins-spi {
pins = "gpio12",
"gpio13",
"gpio14",
"gpio15";
function = "alt3";
};
};
spi6_gpio18: spi6_gpio18 {
pins-spi {
pins = "gpio18",
"gpio19",
"gpio20",
"gpio21";
function = "alt3";
};
};
uart2_gpio0: uart2_gpio0 {
pin-tx {
pins = "gpio0";
function = "alt4";
bias-disable;
};
pin-rx {
pins = "gpio1";
function = "alt4";
bias-pull-up;
};
};
uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
pin-cts {
pins = "gpio2";
function = "alt4";
bias-pull-up;
};
pin-rts {
pins = "gpio3";
function = "alt4";
bias-disable;
};
};
uart3_gpio4: uart3_gpio4 {
pin-tx {
pins = "gpio4";
function = "alt4";
bias-disable;
};
pin-rx {
pins = "gpio5";
function = "alt4";
bias-pull-up;
};
};
uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
pin-cts {
pins = "gpio6";
function = "alt4";
bias-pull-up;
};
pin-rts {
pins = "gpio7";
function = "alt4";
bias-disable;
};
};
uart4_gpio8: uart4_gpio8 {
pin-tx {
pins = "gpio8";
function = "alt4";
bias-disable;
};
pin-rx {
pins = "gpio9";
function = "alt4";
bias-pull-up;
};
};
uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
pin-cts {
pins = "gpio10";
function = "alt4";
bias-pull-up;
};
pin-rts {
pins = "gpio11";
function = "alt4";
bias-disable;
};
};
uart5_gpio12: uart5_gpio12 {
pin-tx {
pins = "gpio12";
function = "alt4";
bias-disable;
};
pin-rx {
pins = "gpio13";
function = "alt4";
bias-pull-up;
};
};
uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
pin-cts {
pins = "gpio14";
function = "alt4";
bias-pull-up;
};
pin-rts {
pins = "gpio15";
function = "alt4";
bias-disable;
};
};
};
&i2c0 {
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
};
&i2c1 {
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
};
&mailbox {
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
};
&sdhci {
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
};
&sdhost {
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
};
&spi {
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
};
&spi1 {
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
};
&spi2 {
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
};
&system_timer {
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
};
&txp {
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
};
&uart0 {
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
};
&uart1 {
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
};
&usb {
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
};
&vec {
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
};

194
arch/arm/boot/dts/bcm2835-common.dtsi Normal file
View File

@ -0,0 +1,194 @@
// SPDX-License-Identifier: GPL-2.0
/* This include file covers the common peripherals and configuration between
* bcm2835, bcm2836 and bcm2837 implementations.
*/
/ {
interrupt-parent = <&intc>;
soc {
dma: dma@7e007000 {
compatible = "brcm,bcm2835-dma";
reg = <0x7e007000 0xf00>;
interrupts = <1 16>,
<1 17>,
<1 18>,
<1 19>,
<1 20>,
<1 21>,
<1 22>,
<1 23>,
<1 24>,
<1 25>,
<1 26>,
/* dma channel 11-14 share one irq */
<1 27>,
<1 27>,
<1 27>,
<1 27>,
/* unused shared irq for all channels */
<1 28>;
interrupt-names = "dma0",
"dma1",
"dma2",
"dma3",
"dma4",
"dma5",
"dma6",
"dma7",
"dma8",
"dma9",
"dma10",
"dma11",
"dma12",
"dma13",
"dma14",
"dma-shared-all";
#dma-cells = <1>;
brcm,dma-channel-mask = <0x7f35>;
};
intc: interrupt-controller@7e00b200 {
compatible = "brcm,bcm2835-armctrl-ic";
reg = <0x7e00b200 0x200>;
interrupt-controller;
#interrupt-cells = <2>;
};
pm: watchdog@7e100000 {
compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
#power-domain-cells = <1>;
#reset-cells = <1>;
reg = <0x7e100000 0x114>,
<0x7e00a000 0x24>;
clocks = <&clocks BCM2835_CLOCK_V3D>,
<&clocks BCM2835_CLOCK_PERI_IMAGE>,
<&clocks BCM2835_CLOCK_H264>,
<&clocks BCM2835_CLOCK_ISP>;
clock-names = "v3d", "peri_image", "h264", "isp";
system-power-controller;
};
pixelvalve@7e206000 {
compatible = "brcm,bcm2835-pixelvalve0";
reg = <0x7e206000 0x100>;
interrupts = <2 13>; /* pwa0 */
};
pixelvalve@7e207000 {
compatible = "brcm,bcm2835-pixelvalve1";
reg = <0x7e207000 0x100>;
interrupts = <2 14>; /* pwa1 */
};
thermal: thermal@7e212000 {
compatible = "brcm,bcm2835-thermal";
reg = <0x7e212000 0x8>;
clocks = <&clocks BCM2835_CLOCK_TSENS>;
#thermal-sensor-cells = <0>;
status = "disabled";
};
i2c2: i2c@7e805000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e805000 0x1000>;
interrupts = <2 21>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
};
pixelvalve@7e807000 {
compatible = "brcm,bcm2835-pixelvalve2";
reg = <0x7e807000 0x100>;
interrupts = <2 10>; /* pixelvalve */
};
hdmi: hdmi@7e902000 {
compatible = "brcm,bcm2835-hdmi";
reg = <0x7e902000 0x600>,
<0x7e808000 0x100>;
interrupts = <2 8>, <2 9>;
ddc = <&i2c2>;
clocks = <&clocks BCM2835_PLLH_PIX>,
<&clocks BCM2835_CLOCK_HSM>;
clock-names = "pixel", "hdmi";
dmas = <&dma 17>;
dma-names = "audio-rx";
status = "disabled";
};
v3d: v3d@7ec00000 {
compatible = "brcm,bcm2835-v3d";
reg = <0x7ec00000 0x1000>;
interrupts = <1 10>;
power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
};
vc4: gpu {
compatible = "brcm,bcm2835-vc4";
};
};
};
&cpu_thermal {
thermal-sensors = <&thermal>;
};
&gpio {
i2c_slave_gpio18: i2c_slave_gpio18 {
brcm,pins = <18 19 20 21>;
brcm,function = <BCM2835_FSEL_ALT3>;
};
jtag_gpio4: jtag_gpio4 {
brcm,pins = <4 5 6 12 13>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
pwm0_gpio12: pwm0_gpio12 {
brcm,pins = <12>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
pwm0_gpio18: pwm0_gpio18 {
brcm,pins = <18>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
pwm0_gpio40: pwm0_gpio40 {
brcm,pins = <40>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
pwm1_gpio13: pwm1_gpio13 {
brcm,pins = <13>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
pwm1_gpio19: pwm1_gpio19 {
brcm,pins = <19>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
pwm1_gpio41: pwm1_gpio41 {
brcm,pins = <41>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
pwm1_gpio45: pwm1_gpio45 {
brcm,pins = <45>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
};
&i2s {
dmas = <&dma 2>, <&dma 3>;
dma-names = "tx", "rx";
};
&sdhost {
dmas = <&dma 13>;
dma-names = "rx-tx";
};
&spi {
dmas = <&dma 6>, <&dma 7>;
dma-names = "tx", "rx";
};

4
arch/arm/boot/dts/bcm2835-rpi.dtsi
View File

@ -59,10 +59,6 @@ &i2c1 {
clock-frequency = <100000>;
};
&i2c2 {
status = "okay";
};
&usb {
power-domains = <&power RPI_POWER_DOMAIN_USB>;
};

1
arch/arm/boot/dts/bcm2835.dtsi
View File

@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "bcm283x.dtsi"
#include "bcm2835-common.dtsi"
/ {
compatible = "brcm,bcm2835";

1
arch/arm/boot/dts/bcm2836.dtsi
View File

@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "bcm283x.dtsi"
#include "bcm2835-common.dtsi"
/ {
compatible = "brcm,bcm2836";

1
arch/arm/boot/dts/bcm2837.dtsi
View File

@ -1,4 +1,5 @@
#include "bcm283x.dtsi"
#include "bcm2835-common.dtsi"
/ {
compatible = "brcm,bcm2837";

7
arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi Normal file
View File

@ -0,0 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
&usb {
dr_mode = "peripheral";
g-rx-fifo-size = <256>;
g-np-tx-fifo-size = <32>;
g-tx-fifo-size = <256 256 512 512 512 768 768>;
};

190
arch/arm/boot/dts/bcm283x.dtsi
View File

@ -18,7 +18,6 @@
/ {
compatible = "brcm,bcm2835";
model = "BCM2835";
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
@ -36,8 +35,6 @@ cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <1000>;
thermal-sensors = <&thermal>;
trips {
cpu-crit {
temperature = <80000>;
@ -56,7 +53,7 @@ soc {
#address-cells = <1>;
#size-cells = <1>;
timer@7e003000 {
system_timer: timer@7e003000 {
compatible = "brcm,bcm2835-system-timer";
reg = <0x7e003000 0x1000>;
interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
@ -67,74 +64,12 @@ timer@7e003000 {
clock-frequency = <1000000>;
};
txp@7e004000 {
txp: txp@7e004000 {
compatible = "brcm,bcm2835-txp";
reg = <0x7e004000 0x20>;
interrupts = <1 11>;
};
dma: dma@7e007000 {
compatible = "brcm,bcm2835-dma";
reg = <0x7e007000 0xf00>;
interrupts = <1 16>,
<1 17>,
<1 18>,
<1 19>,
<1 20>,
<1 21>,
<1 22>,
<1 23>,
<1 24>,
<1 25>,
<1 26>,
/* dma channel 11-14 share one irq */
<1 27>,
<1 27>,
<1 27>,
<1 27>,
/* unused shared irq for all channels */
<1 28>;
interrupt-names = "dma0",
"dma1",
"dma2",
"dma3",
"dma4",
"dma5",
"dma6",
"dma7",
"dma8",
"dma9",
"dma10",
"dma11",
"dma12",
"dma13",
"dma14",
"dma-shared-all";
#dma-cells = <1>;
brcm,dma-channel-mask = <0x7f35>;
};
intc: interrupt-controller@7e00b200 {
compatible = "brcm,bcm2835-armctrl-ic";
reg = <0x7e00b200 0x200>;
interrupt-controller;
#interrupt-cells = <2>;
};
pm: watchdog@7e100000 {
compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
#power-domain-cells = <1>;
#reset-cells = <1>;
reg = <0x7e100000 0x114>,
<0x7e00a000 0x24>;
clocks = <&clocks BCM2835_CLOCK_V3D>,
<&clocks BCM2835_CLOCK_PERI_IMAGE>,
<&clocks BCM2835_CLOCK_H264>,
<&clocks BCM2835_CLOCK_ISP>;
clock-names = "v3d", "peri_image", "h264", "isp";
system-power-controller;
};
clocks: cprman@7e101000 {
compatible = "brcm,bcm2835-cprman";
#clock-cells = <1>;
@ -184,8 +119,7 @@ gpio: gpio@7e200000 {
interrupt-controller;
#interrupt-cells = <2>;
/* Defines pin muxing groups according to
* BCM2835-ARM-Peripherals.pdf page 102.
/* Defines common pin muxing groups
*
* While each pin can have its mux selected
* for various functions individually, some
@ -263,15 +197,7 @@ i2c1_gpio44: i2c1_gpio44 {
brcm,pins = <44 45>;
brcm,function = <BCM2835_FSEL_ALT2>;
};
i2c_slave_gpio18: i2c_slave_gpio18 {
brcm,pins = <18 19 20 21>;
brcm,function = <BCM2835_FSEL_ALT3>;
};
jtag_gpio4: jtag_gpio4 {
brcm,pins = <4 5 6 12 13>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
jtag_gpio22: jtag_gpio22 {
brcm,pins = <22 23 24 25 26 27>;
brcm,function = <BCM2835_FSEL_ALT4>;
@ -286,35 +212,6 @@ pcm_gpio28: pcm_gpio28 {
brcm,function = <BCM2835_FSEL_ALT2>;
};
pwm0_gpio12: pwm0_gpio12 {
brcm,pins = <12>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
pwm0_gpio18: pwm0_gpio18 {
brcm,pins = <18>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
pwm0_gpio40: pwm0_gpio40 {
brcm,pins = <40>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
pwm1_gpio13: pwm1_gpio13 {
brcm,pins = <13>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
pwm1_gpio19: pwm1_gpio19 {
brcm,pins = <19>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
pwm1_gpio41: pwm1_gpio41 {
brcm,pins = <41>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
pwm1_gpio45: pwm1_gpio45 {
brcm,pins = <45>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
sdhost_gpio48: sdhost_gpio48 {
brcm,pins = <48 49 50 51 52 53>;
brcm,function = <BCM2835_FSEL_ALT0>;
@ -396,7 +293,7 @@ uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
};
uart0: serial@7e201000 {
compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
compatible = "arm,pl011", "arm,primecell";
reg = <0x7e201000 0x200>;
interrupts = <2 25>;
clocks = <&clocks BCM2835_CLOCK_UART>,
@ -410,8 +307,6 @@ sdhost: mmc@7e202000 {
reg = <0x7e202000 0x100>;
interrupts = <2 24>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
dmas = <&dma 13>;
dma-names = "rx-tx";
status = "disabled";
};
@ -419,10 +314,6 @@ i2s: i2s@7e203000 {
compatible = "brcm,bcm2835-i2s";
reg = <0x7e203000 0x24>;
clocks = <&clocks BCM2835_CLOCK_PCM>;
dmas = <&dma 2>,
<&dma 3>;
dma-names = "tx", "rx";
status = "disabled";
};
@ -431,8 +322,6 @@ spi: spi@7e204000 {
reg = <0x7e204000 0x200>;
interrupts = <2 22>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
dmas = <&dma 6>, <&dma 7>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -448,18 +337,6 @@ i2c0: i2c@7e205000 {
status = "disabled";
};
pixelvalve@7e206000 {
compatible = "brcm,bcm2835-pixelvalve0";
reg = <0x7e206000 0x100>;
interrupts = <2 13>; /* pwa0 */
};
pixelvalve@7e207000 {
compatible = "brcm,bcm2835-pixelvalve1";
reg = <0x7e207000 0x100>;
interrupts = <2 14>; /* pwa1 */
};
dpi: dpi@7e208000 {
compatible = "brcm,bcm2835-dpi";
reg = <0x7e208000 0x8c>;
@ -490,14 +367,6 @@ dsi0: dsi@7e209000 {
};
thermal: thermal@7e212000 {
compatible = "brcm,bcm2835-thermal";
reg = <0x7e212000 0x8>;
clocks = <&clocks BCM2835_CLOCK_TSENS>;
#thermal-sensor-cells = <0>;
status = "disabled";
};
aux: aux@7e215000 {
compatible = "brcm,bcm2835-aux";
#clock-cells = <1>;
@ -587,16 +456,6 @@ i2c1: i2c@7e804000 {
status = "disabled";
};
i2c2: i2c@7e805000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e805000 0x1000>;
interrupts = <2 21>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
vec: vec@7e806000 {
compatible = "brcm,bcm2835-vec";
reg = <0x7e806000 0x1000>;
@ -605,26 +464,6 @@ vec: vec@7e806000 {
status = "disabled";
};
pixelvalve@7e807000 {
compatible = "brcm,bcm2835-pixelvalve2";
reg = <0x7e807000 0x100>;
interrupts = <2 10>; /* pixelvalve */
};
hdmi: hdmi@7e902000 {
compatible = "brcm,bcm2835-hdmi";
reg = <0x7e902000 0x600>,
<0x7e808000 0x100>;
interrupts = <2 8>, <2 9>;
ddc = <&i2c2>;
clocks = <&clocks BCM2835_PLLH_PIX>,
<&clocks BCM2835_CLOCK_HSM>;
clock-names = "pixel", "hdmi";
dmas = <&dma 17>;
dma-names = "audio-rx";
status = "disabled";
};
usb: usb@7e980000 {
compatible = "brcm,bcm2835-usb";
reg = <0x7e980000 0x10000>;
@ -636,36 +475,19 @@ usb: usb@7e980000 {
phys = <&usbphy>;
phy-names = "usb2-phy";
};
v3d: v3d@7ec00000 {
compatible = "brcm,bcm2835-v3d";
reg = <0x7ec00000 0x1000>;
interrupts = <1 10>;
power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
};
vc4: gpu {
compatible = "brcm,bcm2835-vc4";
};
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
/* The oscillator is the root of the clock tree. */
clk_osc: clock@3 {
clk_osc: clk-osc {
compatible = "fixed-clock";
reg = <3>;
#clock-cells = <0>;
clock-output-names = "osc";
clock-frequency = <19200000>;
};
clk_usb: clock@4 {
clk_usb: clk-usb {
compatible = "fixed-clock";
reg = <4>;
#clock-cells = <0>;
clock-output-names = "otg";
clock-frequency = <480000000>;

53
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts Normal file
View File

@ -0,0 +1,53 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2019 Legrand AV Inc.
*/
/dts-v1/;
#include "bcm47094.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
model = "Luxul XWC-2000 V1";
chosen {
bootargs = "earlycon";
};
memory {
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
};
leds {
compatible = "gpio-leds";
status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
};
};
};
&uart1 {
status = "okay";
};
&spi_nor {
status = "okay";
};

3
arch/arm64/boot/dts/broadcom/Makefile
View File

@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-a-plus.dtb \
dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb \
bcm2837-rpi-3-a-plus.dtb \
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
bcm2837-rpi-cm3-io3.dtb

2
arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts Normal file
View File

@ -0,0 +1,2 @@
// SPDX-License-Identifier: GPL-2.0
#include "arm/bcm2711-rpi-4-b.dts"