This is the current version of the spu file system, used
for driving SPEs on the Cell Broadband Engine.
This release is almost identical to the version for the
2.6.14 kernel posted earlier, which is available as part
of the Cell BE Linux distribution from
http://www.bsc.es/projects/deepcomputing/linuxoncell/.
The first patch provides all the interfaces for running
spu application, but does not have any support for
debugging SPU tasks or for scheduling. Both these
functionalities are added in the subsequent patches.
See Documentation/filesystems/spufs.txt on how to use
spufs.
Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This patch adds the necessary core bus support used by device drivers
that sit on the IBM GX bus on modern pSeries machines like the Galaxy
infiniband for example. It provide transparent DMA ops (the low level
driver works with virtual addresses directly) along with a simple bus
layer using the Open Firmware matching routines.
Signed-off-by: Heiko J Schick <schickhj@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This cleanup patch speeds up the null syscall path on ppc64 by about 3%,
and brings the ppc32 and ppc64 code slightly closer together.
The ppc64 code was checking current_thread_info()->flags twice in the
syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling
interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after
disabling interrupts. Now we do the same as ppc32 -- check the flags
only once in the fast path, and re-enable interrupts if necessary in the
ptrace case.
The patch abolishes the 'syscall_noerror' member of struct thread_info
and replaces it with a TIF_NOERROR bit in the flags, which is handled in
the slow path. This shortens the syscall entry code, which no longer
needs to clear syscall_noerror.
The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow
path to save the non-volatile GPRs into a signal frame. This removes the
need for the assembly wrappers around sys_sigsuspend(),
sys_rt_sigsuspend(), et al which existed solely to save those registers
in advance. It also means I don't have to add new wrappers for ppoll()
and pselect(), which is what I was supposed to be doing when I got
distracted into this...
Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit
directly into a signal handler (as required by sigsuspend et al) by
introducing a TIF_RESTOREALL flag which causes _all_ the registers to be
reloaded from the pt_regs by taking the ret_from_exception path, instead
of the normal syscall exit path which stomps on the callee-saved GPRs.
It appears to pass an LTP test run on ppc64, and passes basic testing on
ppc32 too. Brief tests of ptrace functionality with strace and gdb also
appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :)
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Moved 83xx and QUICC Engine interrupt handling code into arch/powerpc
as a precursor of getting 83xx sub-arch building in arch/powerpc.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This patch merges, to some extent, the PPC32 and PPC64 kexec implementations.
We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions.
The current PPC64 implementation becomes the "default" implementation for PPC64
which platforms can select if they need no special treatment.
I've added these default callbacks to pseries/maple/cell/powermac, this means
iSeries no longer supports kexec - but it never worked anyway.
I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with
PPC64. Judging by the comments it might be better named machine_kexec_non_of,
or something, but at the moment it's the only implementation for PPC32 so it's
the "default".
Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we
already have in setup-common.c on powerpc. All this does is call
ppc_md.nvram_sync, which only powermac implements, so instead make
machine_shutdown a ppc_md member and have it call core99_nvram_sync directly
on powermac.
I've also stuck relocate_kernel.S into misc_32.S for powerpc.
Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on
P5 LPAR and successfully kexec'ed.
Should apply on top of 493f25ef40.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This patch removes the EXPORT_SYMBOL'ed but completely unused variable
ucSystemType and removes the unneeded EXPORT_SYMBOL(_prep_type).
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Nothing prevents a user to modprobe a framebuffer driver from e.g. the
xterm prompt. As a result, the set_par() function of the driver will be
called from fbcon_init().
This is fatal as a lot of X / framebuffer combinations are unable to
recover from set_par() reprogramming the graphics controller in
KD_GRAPHICS mode.
It is also unnecessary as the set_par() function will be called during a
switch to KD_TEXT anyway. Because of this no side effects are possible.
Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update the ibmasm driver to use the dynamic allocation of input_dev
structs to work with the sysfs subsystem.
Vojtech: Fixed some problems/bugs in the patch.
Dmitry: Fixed some more.
Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Since the ARM AMBA bus is used on MIPS as well as ARM, we need
to make the bus available for other architectures to use. Move
the AMBA include files from include/asm-arm/hardware/ to
include/linux/amba/
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patch from Andre McCurdy
Replaces generic swab32 routine with a more ARM friendly version.
Reduces kernel text size by approx 1200 bytes when compiled with
3.4.4 and approx 2400 bytes with 4.0.2
Probably some performance benefit as well.
Signed-off-by: Andre McCurdy <armccurdy@yahoo.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patch from Richard Purdie
Fix a gcc4 build error (incomplete element type) in the pxa SharpSL
PM code.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patch from Pavel Pisa
Correction of the code broken by update
whole-tree platform devices update.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
I've spent the past 3 days digging into a glibc testsuite failure in
current CVS, specifically libc/rt/tst-cputimer1.c The thr1 and thr2
timers fire too early in the second pass of this test. The second
pass is noteworthy because it makes use of intervals, whereas the
first pass does not.
All throughout the posix-cpu-timers.c code, the calculation of the
process sched_time sum is implemented roughly as:
unsigned long long sum;
sum = tsk->signal->sched_time;
t = tsk;
do {
sum += t->sched_time;
t = next_thread(t);
} while (t != tsk);
In fact this is the exact scheme used by check_process_timers().
In the case of check_process_timers(), current->sched_time has just
been updated (via scheduler_tick(), which is invoked by
update_process_times(), which subsequently invokes
run_posix_cpu_timers()) So there is no special processing necessary
wrt. that.
In other contexts, we have to allot for the fact that tsk->sched_time
might be a bit out of date if we are current. And the
posix-cpu-timers.c code uses current_sched_time() to deal with that.
Unfortunately it does so in an erroneous and inconsistent manner in
one spot which is what results in the early timer firing.
In cpu_clock_sample_group_locked(), it does this:
cpu->sched = p->signal->sched_time;
/* Add in each other live thread. */
while ((t = next_thread(t)) != p) {
cpu->sched += t->sched_time;
}
if (p->tgid == current->tgid) {
/*
* We're sampling ourselves, so include the
* cycles not yet banked. We still omit
* other threads running on other CPUs,
* so the total can always be behind as
* much as max(nthreads-1,ncpus) * (NSEC_PER_SEC/HZ).
*/
cpu->sched += current_sched_time(current);
} else {
cpu->sched += p->sched_time;
}
The problem is the "p->tgid == current->tgid" test. If "p" is
not current, and the tgids are the same, we will add the process
t->sched_time twice into cpu->sched and omit "p"'s sched_time
which is very very very wrong.
posix-cpu-timers.c has a helper function, sched_ns(p) which takes care
of this, so my fix is to use that here instead of this special tgid
test.
The fact that current can be one of the sub-threads of "p" points out
that we could make things a little bit more accurate, perhaps by using
sched_ns() on every thread we process in these loops. It also points
out that we don't use the most accurate value for threads in the group
actively running other cpus (and this is mentioned in the comment).
But that is a future enhancement, and this fix here definitely makes
sense.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch should fix compilation failure of fs/ufs/dir.c with defined UFS_DIR_DEBUG
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This greatly reduces the amount of memory used by mmtimer on smaller
machines with large values of MAX_COMPACT_NODES.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap: "Dave is no longer at OSDL and is no longer maintaining
that driver."
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch contains two corrections to the LSM-IPsec Nethooks patches
previously applied.
(1) free a security context on a failed insert via xfrm_user
interface in xfrm_add_policy. Memory leak.
(2) change the authorization of the allocation of a security context
in a xfrm_policy or xfrm_state from both relabelfrom and relabelto
to setcontext.
Signed-off-by: Trent Jaeger <tjaeger@cse.psu.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
pktgen_find_thread() and pktgen_create_thread() are only called at
initialization time.
Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
It looks like the bridge netfilter code does not correctly update
the hardware checksum after popping off the VLAN header.
This is by inspection, I have *not* tested this.
To test you would need to set up a filtering bridge with vlans
and a device the does hardware receive checksum (skge, or sungem)
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a user-space server application calls bind on a socket, then in kernel
space this bound socket is considered 'x25-linked' and the SOCK_ZAPPED flag
is unset.(As in x25_bind()/af_x25.c).
Now when a user-space client application attempts to connect to the server
on the listening socket, if the kernel accepts this in-coming call, then it
returns a new socket to userland and attempts to reply to the caller.
The reply/x25_sendmsg() will fail, because the new socket created on
call-accept has its SOCK_ZAPPED flag set by x25_make_new().
(sock_init_data() called by x25_alloc_socket() called by x25_make_new()
sets the flag to SOCK_ZAPPED)).
Fix: Using the sock_copy_flag() routine available in sock.h fixes this.
Tested on 32 and 64 bit kernels with x25 over tcp.
Signed-off-by: Shaun Pereira <pereira.shaun@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It should return an unsigned value, and fix sk_filter() as well.
Signed-off-by: Kris Katterjohn <kjak@ispwest.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This uses is_multicast_ether_addr() because it has recently been
changed to do the same thing these seperate tests are doing.
Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixed "make gconfig" with POSIXLY_CORRECT=1 set.
This issue was reported by Jens Elkner <elkner@linofee.org> in kernel
Bugzilla #2919.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Now when kbuild passes KBUILD_MODNAME with "" do not __stringify it when
used. Remove __stringnify for all users.
This also fixes the output of:
$ ls -l /sys/module/
drwxr-xr-x 4 root root 0 2006-01-05 14:24 pcmcia
drwxr-xr-x 4 root root 0 2006-01-05 14:24 pcmcia_core
drwxr-xr-x 3 root root 0 2006-01-05 14:24 "processor"
drwxr-xr-x 3 root root 0 2006-01-05 14:24 "psmouse"
The quoting of the module names will be gone again.
Thanks to GregKH + Kay Sievers for reproting this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Print messages when an unsupported encrytion algorthm is requested or
there is an error locating a supported algorthm.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Print messages when an unsupported encrytion algorthm is requested or
there is an error locating a supported algorthm.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Also update the tokenlen calculations to accomodate g_token_size().
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If someone changes the uid/gid mapping in userland, then we do eventually
want those changes to be propagated to the kernel. Currently the kernel
assumes that it may cache entries forever.
Add an expiration time + garbage collector for idmap entries.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
