Our usual set of DT changes for the arm64 Allwinner SoCs.
The most notable things are:
- HDMI support on the A64
- New boards: OrangePi One Plus
-----BEGIN PGP SIGNATURE-----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=sPs9
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner arm64 DT changes for 4.20
Our usual set of DT changes for the arm64 Allwinner SoCs.
The most notable things are:
- HDMI support on the A64
- New boards: OrangePi One Plus
* tag 'sunxi-dt64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (28 commits)
arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay
arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI
arm64: dts: allwinner: a64: Add display pipeline
arm64: dts: allwinner: h6: add system controller device tree node
arm64: dts: allwinner: h6: Add OrangePi One Plus initial support
arm64: dts: allwinner: a64: Rename r_i2c_pins_a label to r_i2c_pl89_pins
arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins
arm64: dts: allwinner: a64: Split out data strobe pin from mmc2 pinmux
arm64: dts: allwinner: a64: NanoPi-A64: Add blue status LED
arm64: dts: allwinner: a64: NanoPi-A64: Add Wifi chip
arm64: dts: allwinner: a64: NanoPi-A64: Add Ethernet
arm64: dts: allwinner: a64: NanoPi-A64: Fix DCDC1 voltage
arm64: dts: allwinner: a64: Olinuxino: enable USB
arm64: dts: allwinner: a64: Olinuxino: add Ethernet nodes
arm64: dts: allwinner: a64: Olinuxino: fix DRAM voltage
arm64: dts: allwinner: a64: Orange Pi Win: Adjust CSI power rails
arm64: dts: allwinner: a64: Orange Pi Win: Add SPI flash node
arm64: dts: allwinner: a64: Orange Pi Win: Add SDIO node
arm64: dts: allwinner: a64: Orange Pi Win: Add LED node
arm64: dts: allwinner: a64: Orange Pi Win: Add UARTs
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is our usual H3/H5 pull request
The most notable changes are:
- the video decoding / encoding unit is finally enabled on the H3
- Mali support for the H5
- New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE0VqZU19dR2zEVaqr0rTAlCFNr3QFAluvhigACgkQ0rTAlCFN
r3SHzA/+IsYaAQgvy8NE7Ok1rhy/OU7eLPjd2JVqBgJ6SwCkcM4eW7Zol6SoMawG
Wt9Bh+1JFvyzi4GiftwL/rPzOh2rxjuuDZMmLo5sZBztTLoFmKv9XIYgjnv8kVJY
WXQ5Z3BOKA0H6lyIw6jinS6uotTGiWhtvihOpoAeus8pHJ/AWo3lbntb0tdPob7b
fA95Dsm5ddqhPonrkqq1WEJ+Yepetoa7m2U2dJLOUHPaX8AmIm4GgQNoA6MEVYRJ
0sZ/FDhe+5yvDRKbebVRrlqITGgwEYuTPYO1zQEQleQo6SPEvJuUOo+CW5R3Pgqc
sKk5UxohaAvxbATt5gYhqTl4GwSKkMrNdJroVTc3bf8CekwxgpnNoV2nszGQSrjH
yU2Nwy0d2ok4ZacxoFBjosbGWYh2UuqAlv7lX/UPr79GbeJpA9IUDXQxBGJoodTH
0Wy3rUSgAUU/nRfsaDZtkLqIB8/keiSZzWV97aCnIUGHWk00MfnB8nzhkU1YEel0
8Lbqh+9NY4+P3Ps4UxsnOIL0LQZt2Twf738GF/boa4RftYQOUJJQmvNO8TpFL0OK
VKe10hX0trfsNOv2Ws7oTsGrLZXqLsB8r6jjsSX84NR2Dft2CYj8s7u2lpnmFTxd
ciBjzeyFb4TbYW2iYOsYLRaei0w8GSNMdHShNU04fO/zh1dP8lU=
=AJmQ
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner H3 and H5 DT additions for 4.20
This is our usual H3/H5 pull request
The most notable changes are:
- the video decoding / encoding unit is finally enabled on the H3
- Mali support for the H5
- New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support
* tag 'sunxi-h3-h5-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees
ARM: dts: sun8i-h3: Add Video Engine and reserved memory nodes
arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5
ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus
ARM: dts: sun8i: h3: bpi-m2-plus: Fix address for external RGMII Ethernet PHY
ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block
arm64: dts: allwinner: h5: Add device node for Mali-450 GPU
ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 support
nvmem: sunxi-sid: add support for H5's SID controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove fixed clock in Cubieboard 7 and use Clock Management Unit clocks
for all UART nodes in Actions Semi S700 SoC.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Moved/added to SoC]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add pinctrl definitions for Actions Semiconductor S900 I2C controllers.
Pinctrl definitions are only available for I2C0, I2C1, and I2C2.
Enable I2C1 and I2C2 exposed on the low speed expansion connector in
Bubblegum-96 board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Squashed]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Bananapi released an updated revision of the H3/H5 based Bananapi M2+.
Version 1.2 enables voltage control for the CPU's regulator by using
a GPIO line to toggle a MOSFET that can change the effective resistance
value in the regulator's feedback network.
This patch adds a common .dtsi file for this new revision, which
includes the original common sunxi-bananapi-m2-plus.dtsi file, and
adds the GPIO-controlled regulator and a cpu-supply reference. H3
and H5 variant dts files are added as well.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Bananapi M2 Plus H5 is a variant of the original Bananapi M2 Plus,
with the H3 SoC replaced with an H5. Everything else is the same.
Add a stub device tree incorporating the shared bananapi-m2-plus dtsi
file.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The H5 has a Mali-450 GPU with 4 Pixel Processor cores.
Interestingly, while the datasheet lists an interrupt line for the GPU's
PMU, the hardware block itself doesn't seem to have it. Reads from the
PMU address range all return zero, and writes are ignored.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This contains mostly device tree changes to support faster SDHCI modes
on Tegra210 and Tegra186.
-----BEGIN PGP SIGNATURE-----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=DHnl
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
arm64: tegra: Device tree changes for v4.20-rc1
This contains mostly device tree changes to support faster SDHCI modes
on Tegra210 and Tegra186.
* tag 'tegra-for-4.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: I2C on Tegra194 is not compatible with Tegra114
arm64: dts: tegra186: Enable HS400
arm64: dts: tegra210: Enable HS400
arm64: dts: tegra186: Add SDMMC4 DQS trim value
arm64: dts: tegra210: Add SDMMC4 DQS trim value
arm64: dts: tegra186: Assign clocks for sdmmc1 and sdmmc4
arm64: dts: tegra210: Assign clocks for sdmmc1 and sdmmc4
arm64: dts: tegra186: Add SDHCI tap and trim values
arm64: dts: tegra210: Add SDHCI tap and trim values
arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- new SoC support: basic support for G12A family
- new board: Amlogic U200 board, using G12A SoC
- fix SPI bus warnings from new dtc updates
-----BEGIN PGP SIGNATURE-----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=TU0T
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic ARM64 DT updates for v4.20, round 2
- new SoC support: basic support for G12A family
- new board: Amlogic U200 board, using G12A SoC
- fix SPI bus warnings from new dtc updates
* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT support
dt-bindings: arm: amlogic: Add Meson G12A binding
arm64: dts: meson: Fix erroneous SPI bus warnings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dtc has new checks for SPI buses. Fix the warnings in node names.
arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
Cc: Brijesh Singh <brijeshkumar.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The PHY found on the A64-OLinuXino requires a TX delay in order to
operate properly. Olimex uses a 600ps second delay in their BSP, and
that has been found to work, so let's use that value in the current
DT.
Signed-off-by: Rodrigo Exterckötter Tjäder <rodrigo@tjader.xyz>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Switch to updated coresight bindings for hw ports
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Tegra194 contains a version of the I2C controller that is no longer
compatible with the version found in Tegra114.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Based on a similar patch of the R8A7796 device tree
by Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Adds LVDS decoder, HDMI encoder and connector for the Draak board.
The LVDS0 and LVDS1 encoders can use the DU_DOTCLKIN0, DU_DOTCLKIN1 and
EXTAL externals clocks. Two of them are provided to the SoC on the Draak
board, hook them up in DT.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the LVDS decoder, HDMI encoder, VGA encoder and HDMI and VGA
connectors, and wire up the display-related nodes with clocks, pinmux
and regulators.
The LVDS0 and LVDS1 encoders can use the DU_DOTCLKIN0, DU_DOTCLKIN1 and
EXTAL externals clocks. Two of them are provided to the SoC on the Ebisu
board, hook them up in DT.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The r8a77995 D3 platform has 2 LVDS channels connected to the DU.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
[uli: moved lvds* into the soc node, added PM domains, resets]
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Try to add basic DT support for the Amlogic's Meson-G12A S905D2 SoC,
which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
Timer, UART. It's capable of booting up into the serial console.
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The R8A77990 (E3) platform has one RGB output and two LVDS outputs
connected to the DU. Add the DT nodes for the DU, LVDS encoders and
supporting VSP and FCP.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Commit a7eb26392b ("arm64: dts: broadcom: Add reference to Compute
Module IO Board V3") adds the bcm2837-rpi-cm3-io3.dts file as a target
in the Makefile, rather than the .dtb name. This will skip the
generation of the .dtb file at compile time and will fail the dtbs_install
target.
Fixes: a7eb26392b ("arm64: dts: broadcom: Add reference to Compute Module IO Board V3")
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for the bananapi R64 (BPI-R64) development board from
BIPAI KEJI. Detailed hardware information for BPI-R64 which could be
found on http://wiki.banana-pi.org/Banana_Pi_BPI-R64
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Fix ram size to 512 megabytes and sort nodes in alphabetical order.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add a built-in bluetooth 5 support for MT7622.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add device tree entries for timer, ARM CCI-400 and its PMU.
Otherwise, we add a cortex-a53-pmu node to enable hw perfevents.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable all necessary device tree nodes and add connector node to device
trees for all supported A64 boards with HDMI.
Jagan, tested on BPI-M64, OPI-Win, A64-Olinuxino, NPI-A64
Vasily, tested on pine64-lts
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Icenowy: squash all board patches altogether and change supply name]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Allwinner A64 have a display pipeline with 2 mixers/TCONs, the first
TCON is connected to LCD and the second is to HDMI.
The HDMI controller/PHY pair is similar to the one on H3/H5.
Add all required device tree nodes of the display pipeline, including
the TCON0 LCD one and the TCON1 HDMI one.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Icenowy: refactor commit message and add 1st pipeline]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Describe TPU in the R8A779{7|8}0 device trees.
Based on the original (and large) patches by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
R-Car Gen3 SoCs need to enable/deassert clocks/resets of both usb 2.0
host (included phy) and peripheral. Otherwise, other side device
cannot work correctly. So, this patch revises properties of clocks
and resets. After that, each device driver can enable/deassert
clocks/resets by its self.
Notes:
- To work the renesas_usbhs driver correctly when host side drivers
are disabled and the renesas_usbhs driver doesn't have multiple
clock management, this patch doesn't change the order of the clocks
property in each hsusb node.
- This patch doesn't have any side-effects even if the renesas_usbhs
driver doesn't have reset_control and multiple clock management.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
It can't boot without bootargs settings on Uboot on ulcb board.
This patch adds missing default bootargs.
ulcb BSP can overwrite it by own UBoot settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This branch adds changes for the Texas Instruments AM654 SoC. Included
changes are:
- Add uart nodes
- Change address cells and size-cells of interconnect tfrom 1 to 2
- Add secure proxy instance for main domain
- Add DMSC support
-----BEGIN PGP SIGNATURE-----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=VyVP
-----END PGP SIGNATURE-----
Merge tag 'am654-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into next/dt
TI AM654 support for v4.20 merge window.
This branch adds changes for the Texas Instruments AM654 SoC. Included
changes are:
- Add uart nodes
- Change address cells and size-cells of interconnect tfrom 1 to 2
- Add secure proxy instance for main domain
- Add DMSC support
* tag 'am654-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-am6: Add Device Management Security Controller support
arm64: dts: ti: am654: Add secure proxy instance for main domain
arm64: dts: ti: am654: Add uart nodes
arm64: dts: ti: k3-am65: Change #address-cells and #size-cells of interconnect to 2
Signed-off-by: Olof Johansson <olof@lixom.net>
for 4.20, please pull the following:
- Stefan provides a reference to the Compute Module IO Board V3 such
that we can reference the arm counterpart and still build it for arm64
- Rob fixes I2C and SPI bus warnings which are going to show up with his
update to DTC scheduled for 4.20
-----BEGIN PGP SIGNATURE-----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=Ulpq
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.20/devicetree-arm64' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 4.20, please pull the following:
- Stefan provides a reference to the Compute Module IO Board V3 such
that we can reference the arm counterpart and still build it for arm64
- Rob fixes I2C and SPI bus warnings which are going to show up with his
update to DTC scheduled for 4.20
* tag 'arm-soc/for-4.20/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Fix I2C and SPI bus warnings
arm64: dts: broadcom: Add reference to Compute Module IO Board V3
Signed-off-by: Olof Johansson <olof@lixom.net>
