Commit Graph

740432 Commits

Author SHA1 Message Date
Daniel Mack
4836ec42b0 wcn36xx: pass information elements in scan requests
When the wifi driver core passes IE elements in the scan request, append
them to the firmware message. The driver currently tells the core that
it is capable of attaching up to WCN36XX_MAX_SCAN_IE_LEN octets, but
doesn't actually pass them to the the hardware.

Note that this patch doesn't fix a bug that was observed. The change is
merely done for the sake of completeness as the hardware supports
appending IEs in scans. Tests show that network scans work fine with
this patch applied.

Some defines were moved around to avoid cyclic include dependencies.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 09:06:28 +03:00
Daniel Mack
5a425c8b78 wcn36xx: send bss_type in scan requests
Pass the bss_type of the currently configured BSS in the message for the
scan request. Therefore, that setting needs to be kept in struct
wcn36xx_vif.

This seems to be only interesting when scanning for a specific SSID
and doesn't matter for regular wildcard scans.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 09:06:20 +03:00
Daniel Mack
89722f5767 wcn36xx: handle scan cancellation when firmware support is missing
For firmwares that don't have the SCAN_OFFLOAD feature bit set, do
not call into wcn36xx_smd_stop_hw_scan(). Instead, stop the asynchronous
work and call into ieee80211_scan_completed() immediately.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 09:06:13 +03:00
Daniel Mack
80c764d321 wcn36xx: cancel pending scan request when interface goes down
When the network interface goes down while a scan request is still
pending that can't be stopped due to firmware hickups, wcn->scan_req
remains set, even though the hardware is deinitialized. This results
in -EBUSY for all scan requests after the interface was brought up
again.

Fix this by explicitly completing pending scan requests in
wcn36xx_stop().

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 09:06:05 +03:00
Daniel Mack
14ca3c98aa wcn36xx: abort scan request when 'dequeued' indicator is sent
When the firmware sends a WCN36XX_HAL_SCAN_IND_DEQUEUED indication,
the request is apparently no longer valid. Attempts to stop the hardware
scan request subsequently will lead to the following error message, and
the hardware is no longer able to communicate with any AP:

[   57.917186] wcn36xx: ERROR hal_stop_scan_offload response failed err=5

Interpreting this indicator message as scan abortion fixes this.

While at it, add a newline to a debug print.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 09:05:58 +03:00
Govind Singh
d5cded16fd ath10k: enable sta idle power save
Enable sta power save in fw for the targets that
supports idle power save. The idle ps enable command
will be ignored by the firmware which does not support
this feature.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 09:04:30 +03:00
Govind Singh
4945af5b26 ath10k: enable SRRI/DRRI support on ddr for WCN3990
SRRI/DRRI are not mapped in the HW Shadow block and can lead
to un-clocked access if common subsystem in the target is
powered down due to idle mode.

To mitigate this problem SRRI/DRRI can be read from
DDR instead of doing an actual hardware read.
Host allocates non cached memory on ddr and configures
the physical address of this memory to the CE hardware.
The hardware updates the RRI on this particular location.
Read SRRI/DRRI from DDR location instead of
direct target read.

Enable retention restore on ddr using hw params to enable
in specific targets.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 09:04:21 +03:00
Rakesh Pillai
b7ba83f7c4 ath10k: add support for shadow register for WNC3990
WCN3990 needs shadow register write operation support
for copy engine for regular operation in powersave mode.
Add support for copy engine shadow register write in
datapath tx for WCN3990

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 09:04:14 +03:00
Rakesh Pillai
b2e40d7ab8 ath10k: add hw params for shadow register support
wcn3990 supports shadow register for ce write.

Add a hw param for shadow register support.

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 09:04:07 +03:00
Rakesh Pillai
20529b33aa ath10k: enable hw checksum for wcn3990
By default ath10k driver enables the support for HW_CHECKSUM
(NETIF_F_HW_CSUM). Since the TCP/UDP checksum calculation is not enabled
in the wcn3990 firmware the checksum is incorrect in the TCP/UDP packets
and all patckets are dropped. But due note that wcn3990 support in
ath10k is still incomplete so this isn't a critical fix (yet).

Enable hw checksum calculations in wcn3990 hardware by
setting the proper flags in msdu descriptor tso flags.

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 08:57:48 +03:00
Daniel Mack
0fc8bb50bb wcn36xx: pass correct BSS index when deleting BSS keys
The firmware message to delete BSS keys expects a BSS index to be passed.
This field is currently hard-coded to 0. Fix this by passing in the index
we received from the firmware when the BSS was configured.

The encryption type in that message also needs to be set to what was used
when the key was set, so the assignment of vif_priv->encrypt_type is now
done after the firmware command was sent. This reportedly fixes the
following error in AP mode:

  wcn36xx: ERROR hal_remove_bsskey response failed err=6

Also, AFAIU, when a BSS is deleted, the firmware apparently drops all the
keys associated with it. Trying to remove the key explicitly afterwards
will hence lead to the following message:

  wcn36xx: ERROR hal_remove_bsskey response failed err=16

This is now suppressed with an extra check for the BSS index validity.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 08:57:05 +03:00
Wen Gong
fa3440fa2f ath10k: convert wow pattern from 802.3 to 802.11
When trying to set wow wakeup patterns it fails with this command:

iw phyxx wowlan enable patterns offset xx+ IP address xx.xx.xx.xx

The reason is that the wow pattern from upper layer is in 802.3 format
for this case, it need to convert it to 802.11 format. The input
offset parameter is used for 802.3, but the actual offset firmware
need depends on rx_decap_mode, so that it needs to be recalculated.
Pattern of 802.3 packet is not same with 802.11 packet. If the
rx_decap_mode is ATH10K_HW_TXRX_NATIVE_WIFI, then firmware will
receive data packet with 802.11 format from hardware.

Tested with QCA6174 hw3.0 with firmware
WLAN.RM.4.4.1-00099-QCARMSWPZ-1, but this will also affect QCA9377.
This has always failed, so it's not a regression with new firmware
releases.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 08:54:52 +03:00
Carl Huang
60e1d0fb29 ath10k: support MAC address randomization in scan
The ath10k reports the random_mac_addr capability to upper layer
based on the service bit firmware reported. Driver sets the
spoofed flag in scan_ctrl_flag to firmware if upper layer has
enabled this feature in scan request.

Test with QCA6174 hw3.0 and firmware-6.bin_WLAN.RM.4.4.1-00102-QCARMSWP-1,
but QCA9377 is also affected.

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 08:45:41 +03:00
Carl Huang
cea19a6ce8 ath10k: add WMI_SERVICE_AVAILABLE_EVENT support
Add WMI_SERVICE_AVAILABLE_EVENT to extend WMI_SERVICE_READY_EVENT,
the 128bit service map in WMI_SERVICE_READY_EVENT is not enough
for firmware to notice new WLAN service to host driver. Hereby,
for thoese new WLAN service, firmware will notice host driver by
WMI_SERVICE_AVAILABLE_EVENT.

Signed-off-by: Alan Liu <alanliu@codeaurora.org>
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24 08:45:33 +03:00
Daniel Mack
9ff6fde86f wcn36xx: use READ_ONCE() to access desc->ctrl
When accessing shared memory to check for the stat of submitted
descriptors, make sure to use READ_ONCE(). This will guarantee the
compiler treats these memory locations as volatile and doesn't apply
any caching.

While this doesn't fix any particular problem I ran into, it's best
practice to do it this way.

Note that this patch also removes the superflous extra condition check
in the do-while loop in reap_tx_dxes(), as the loop will break
instantly anyway in that case.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 19:22:43 +03:00
Govind Singh
6da2b2d46f ath10k: fix fw path name for WCN3990 target
FW path is mapped incorrectly for the WCN3990
hw version. Fix fw path with correct hw1.0 name.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 19:21:18 +03:00
Erik Stromdahl
9a5511d5f2 ath10k: add inlined wrappers for htt rx ops
Added for the same reason as the TX wrappers.

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 19:19:34 +03:00
Erik Stromdahl
5df6e13130 ath10k: add inlined wrappers for htt tx ops
These wrappers makes the HTT ops align better with the HIF ops
(where similar wrappers are used).

It also makes it easier for a target to have unsupported ops
(by letting the corresponding function pointer be NULL).

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 19:19:28 +03:00
Thomas Hebb
c848966806 ath10k: search all IEs for variant before falling back
commit f2593cb1b2 ("ath10k: Search SMBIOS for OEM board file
extension") added a feature to ath10k that allows Board Data File
(BDF) conflicts between multiple devices that use the same device IDs
but have different calibration requirements to be resolved by allowing
a "variant" string to be stored in SMBIOS [and later device tree, added
by commit d06f26c5c8 ("ath10k: search DT for qcom,ath10k-calibration-
variant")] that gets appended to the ID stored in board-2.bin.

This original patch had a regression, however. Namely that devices with
a variant present in SMBIOS that didn't need custom BDFs could no longer
find the default BDF, which has no variant appended. The patch was
reverted and re-applied with a fix for this issue in commit 1657b8f84e
("search SMBIOS for OEM board file extension").

But the fix to fall back to a default BDF introduced another issue: the
driver currently parses IEs in board-2.bin one by one, and for each one
it first checks to see if it matches the ID with the variant appended.
If it doesn't, it checks to see if it matches the "fallback" ID with no
variant. If a matching BDF is found at any point during this search, the
search is terminated and that BDF is used. The issue is that it's very
possible (and is currently the case for board-2.bin files present in the
ath10k-firmware repository) for the default BDF to occur in an earlier
IE than the variant-specific BDF. In this case, the current code will
happily choose the default BDF even though a better-matching BDF is
present later in the file.

This patch fixes the issue by first searching the entire file for the ID
with variant, and searching for the fallback ID only if that search
fails. It also includes some code cleanup in the area, as
ath10k_core_fetch_board_data_api_n() no longer does its own string
mangling to remove the variant from an ID, instead leaving that job to a
new flag passed to ath10k_core_create_board_name().

I've tested this patch on a QCA4019 and verified that the driver behaves
correctly for 1) both fallback and variant BDFs present, 2) only fallback
BDF present, and 3) no matching BDFs present.

Fixes: 1657b8f84e ("ath10k: search SMBIOS for OEM board file extension")
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 19:18:15 +03:00
Maharaja Kennadyrajan
b022ca257c ath10k: fix a typo in ath10k_wmi_set_wmm_param()
Fix a typo in the function ath10k_wmi_set_wmm_param().

Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:59:30 +03:00
Manikanta Pubbisetty
1e8f775023 ath10k: correct target assert problem due to CE5 stuck
Correct a minor bug in the commit 0628467f97 ("ath10k: fix
copy engine 5 destination ring stuck") which introduced a change to fix
firmware assert that happens when ring indices of copy engine 5 are stuck
for a specific duration, problem with this fix is that it did not use
ring arithmatic. As a result,firmware asserts did not go away entirely
athough the frequency of occurrence has reduced. Using ring arithmatic
to fix the issue.

Tested on QCA9984(fw version-10.4-3.4-00082).

Fixes: 0628467f97 ("ath10k: fix copy engine 5 destination ring stuck)
Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:58:27 +03:00
Colin Ian King
5072d87426 ath6kl: fix spelling mistake: "chache" -> "cache"
Trivial fix to spelling mistake in message text

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:56:40 +03:00
Govind Singh
ae316c4cbb dt: bindings: add bindings for wcn3990 wifi block
Add device tree binding documentation details for wcn3990
wifi block present in Qualcomm SDM845/APQ8098 SoC into
"qcom,ath10k.txt".

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:53:10 +03:00
Govind Singh
a6a793f987 ath10k: vote for hardware resources for WCN3990
Add clock and regulator votes for WCN3990 WLAN
chipset.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:53:03 +03:00
Rakesh Pillai
ea66b12e63 ath10k: check all CE for data if irq summary is not retained
WCN3990 has interrupts per CE and the interrupt summary
is not retained after the interrupt handler has finished
execution. We need to check if we received any
ce in rx and tx completion path.

Generate a interrupt summary with all CE interrupts if
the target does not retain interrupt summary after the
execution of interrupt handler.

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:52:57 +03:00
Rakesh Pillai
140d1214ef ath10k: add support to get target info from hif ops
wcn3990 does not use bmi.
Add support to get target info from hif ops.

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:52:51 +03:00
Govind Singh
546d407c90 ath10k: modify hif tx paddr to dma_addr_t type
Change type of hif sg tx paddr to dma_addr_t for
supporting target having addressing mode greater than
32 bit.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:52:44 +03:00
Govind Singh
d915105231 ath10k: add hif rx methods for wcn3990
Add hif rx methods in rx path for wcn3990
target.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:52:38 +03:00
Govind Singh
d390509bdf ath10k: add hif tx methods for wcn3990
Add hif tx/tx-complete methods for wcn3990
target.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:52:31 +03:00
Govind Singh
0fa4fbe9b8 ath10k: add hif power-up/power-down methods
Add hif power-up/power-down methods for wcn3990
target.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:52:25 +03:00
Govind Singh
84efe7f6eb ath10k: map HTC services to tx/rx pipes for wcn3990
Add mapping of HTC endpoint services supported
by wcn3990 target to tx/rx pipe.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:52:19 +03:00
Govind Singh
b8c27e8621 ath10k: add HTC services for WCN3990
WCN3990 target uses 3 Copy engine(CE1/CE9/CE10) in RX path
and CE 11 for pktlog.
Add data path HTC ep services and PKTLOG services for WCN3990.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:52:12 +03:00
Govind Singh
a6e149a9ff ath10k: add hif start/stop methods for wcn3990 snoc layer
Add hif start/stop callback for allocating/freeing buffers
on tx/rx pipe and enabling/disabling the tx/rx pipe
interrupts.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:52:06 +03:00
Govind Singh
c963a683e7 ath10k: add resource init and deinit for WCN3990
Add methods for resource(memory, irq, HOST CE config)
initialization and de-initialization for WCN3990 target.

WCN3990 target uses 12 copy engine and following CE config.

[CE0] :host->target control and raw streams
[CE1] :target->host HTT
[CE2] :target->host WMI
[CE3] :host->target WMI
[CE4] :host->target HTT
[CE5] :reserved
[CE6] :Target autonomous HIF_memcpy
[CE7] :reserved
[CE8] :reserved
[CE9] :target->host HTT
[CE10] :target->host HTT
[CE11] :target -> host PKTLOG

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:51:59 +03:00
Govind Singh
17f5559e0d ath10k: platform driver for WCN3990 SNOC WLAN module
WCN3990 is integrated 802.11ac chipset with SNOC
bus interface. Add snoc layer driver registration
and associated ops.

WCN3990 support is not yet complete as cold-boot
handshake is done using qmi(Qualcomm-MSM-Interface)
and qmi client support will be added once qmi framework
is available.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:51:52 +03:00
Govind Singh
a0aedd6e0b ath10k: build ce layer in ath10k core module
CE layer is shared between pci and snoc target and results
in duplicate object inclusion if both modules are compiled
together statically and undefined KBUILD_MODNAME if
compiled as module.

Fix this by building ce layer in ath10k core module by
adding ce object inclusion with ATH10K_CE boolean CONFIG.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:50:33 +03:00
Venkateswara Naralasetty
235b9c4276 ath10k: Add tx ack signal support for management frames
This patch add support to get RSSI from acknowledgment
frames for transmitted management frames.

hardware_used: QCA4019, QCA9984.
firmware version: 10.4-3.5.3-00052.

Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19 18:47:00 +03:00
Daniel Mack
5151a673da wcn36xx: allocate skbs with GFP_KERNEL during init
GFP_ATOMIC should only be used when the allocation is done from atomic
context. Introduce a new flag to wcn36xx_dxe_fill_skb() and use GFP_KERNEL
when pre-allocating buffers during init.

This doesn't fix an issue that was observed in the wild, but it reduces
the chance of failed allocations under memory pressure.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-10 17:59:11 +03:00
Loic Poulain
6062546d9b wcn36xx: Remove useless skb spinlock
Each DXE control block is associated to a specific channel.
The channel lock is always taken before accessing a control block.
There is no need to have an extra (useless) spinlock for the control
block skb.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-10 17:39:50 +03:00
Loic Poulain
1391cce7da wcn36xx: Add missing fall through comment in smd.c
This prevents GCC warning.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-10 17:38:55 +03:00
Daniel Mack
2edfcf2b30 wcn36xx: don't delete invalid bss indices
The firmware code cannot cope with requests to remove BSS indices that have
not previously been added. This primarily happens when the device is
suspended and then resumed. ieee80211_reconfig() then calls into
wcn36xx_bss_info_changed() with an empty bssid and BSS_CHANGED_BSSID set,
which subsequently leads to a firmware crash:

[   43.647928] qcom-wcnss-pil a204000.wcnss: fatal error received: halMsg.c:4964:halMsg_DelBss: Invalid BSSIndex 0
[   43.647959] remoteproc remoteproc0: crash detected in a204000.wcnss: type fatal error

To fix this, set bss_index to WCN36XX_HAL_BSS_INVALID_IDX for all bss
that have not been configured in the firmware, and don't call into the
firmware with invalid indices.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-10 17:34:20 +03:00
Daniel Mack
271f1e65ff wcn36xx: don't keep reference to skb if transmission failed
When wcn36xx_dxe_tx_frame() fails to transmit the TX frame, the driver
will call into ieee80211_free_txskb() for the skb in flight, so it'll no
longer be valid. Hence, we shouldn't keep a reference to it in ctl->skb.
Also, if the skb has IEEE80211_TX_CTL_REQ_TX_STATUS set, a pointer to
it will currently remain in wcn->tx_ack_skb, which will potentially lead
to a crash if accessed later.

Fix this by checking the return value of wcn36xx_dxe_tx_frame(), and
nullify wcn->tx_ack_skb again in case of errors. Move the assignment
of ctl->skb in wcn36xx_dxe_tx_frame() so it only happens when the
transmission is successful.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-10 17:34:14 +03:00
Daniel Mack
7cae35199b wcn36xx: check for DMA mapping errors in wcn36xx_dxe_tx_frame()
Bail out if the mapping fails. Even though this hasn't occured during
tests, this unlikely case should still be handled.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Acked-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-10 17:34:08 +03:00
Gustavo A. R. Silva
9c27489a34 ath9k: dfs: remove accidental use of stack VLA
In preparation to enabling -Wvla, remove accidental use of stack VLA.

This avoids an accidental stack VLA (since the compiler thinks
the value of FFT_NUM_SAMPLES can change, even when marked
"const"). This just replaces it with a #define.

Also, fixed as part of the directive to remove all VLAs from
the kernel: https://lkml.org/lkml/2018/3/7/621

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-10 17:32:44 +03:00
Colin Ian King
6ce36faeac ath10k: fix spelling mistake: "tiggers" -> "triggers"
Trivial fix to spelling mistake in message text

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-10 17:31:47 +03:00
Marcus Folkesson
ec2c64e202 ath10k: sdio: fix memory leak for probe allocations
These allocations are not freed upon release.
When on it; go for managed resources instead.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[kvalo: fix two checkpatch warnings]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-10 17:30:50 +03:00
Colin Ian King
db5a4d5e10 wil6210: fix potential null dereference of ndev before null check
The pointer ndev is being dereferenced before it is being null checked,
hence there is a potential null pointer deference. Fix this by only
dereferencing ndev after it has been null checked

Detected by CoverityScan, CID#1467010 ("Dereference before null check")

Fixes: e00243fab8 ("wil6210: infrastructure for multiple virtual interfaces")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-10 17:29:10 +03:00
Arnd Bergmann
6707ba0105 ath10k: avoid possible string overflow
The way that 'strncat' is used here raised a warning in gcc-8:

drivers/net/wireless/ath/ath10k/wmi.c: In function 'ath10k_wmi_tpc_stats_final_disp_tables':
drivers/net/wireless/ath/ath10k/wmi.c:4649:4: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]

Effectively, this is simply a strcat() but the use of strncat() suggests
some form of overflow check. Regardless of whether this might actually
overflow, using strlcat() instead of strncat() avoids the warning and
makes the code more robust.

Fixes: bc64d05220 ("ath10k: debugfs support to get final TPC stats for 10.4 variants")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-10 17:27:52 +03:00
Joe Perches
a72c926291 ath: Remove unnecessary ath_bcast_mac and use eth_broadcast_addr
Remove the static array and use the generic routine to set the
Ethernet broadcast address.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29 12:10:26 +03:00
Rajkumar Manoharan
1b3fdb50f8 ath10k: fix vdev stats for 10.4 firmware
Currently vdev stats displayed in fw_stats are applicable
only for TLV based firmware and fix it for 10.4 firmware
as of now. The vdev stats in 10.4 firmware is split into two
parts (vdev_stats, vdev_stats_extended). The actual stats
are captured only in extended vdev stats. In order to enable
vdev stats, appropriate feature bit will be set on extended
resource config. As FTM related counters are available only on
newer 10.4 based firmware, these counters will be displayed
only on valid data.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29 12:04:12 +03:00