Fix all the warnings in the DT binding schema examples when built with
'W=1'. This is in preparation to make that the default for examples.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Renesas Advanced Power Management Unit Device Tree binding
documentation to json-schema.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Renesas R-Car System Controller Device Tree binding
documentation to json-schema.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Rob Herring <robh@kernel.org>
Call it "pocketbook".
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert BCM2835/6368 Random number generator bindings to DT schema.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Cadence SD/SDIO/eMMC host controller IP (a.k.a. SD4HC)
binding to DT schema format.
Socionext UniPhier ARM 64-bit SoCs are integrated with this IP.
Cc: Piotr Sroka <piotrs@cadence.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the UniPhier MIO (Media I/O) DMA controller binding to DT
schema format.
While I was here, I added the resets property.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the UniPhier System Bus controller binding to DT schema format.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the UniPhier GPIO controller binding to DT schema format.
I omitted the 'gpio-ranges' property because it is defined in the
dt-schema project (/schemas/gpio/gpio.yaml).
As of writing, the 'gpio-ranges-group-names' is not defined in that
file despite it is a common property described in
Documentation/devicetree/bindings/gpio/gpio.txt
So, I defined it in this schema.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the UniPhier FIFO-builtin I2C (a.k.a. FIFO) controller binding
to DT schema format.
There are two types of I2C controllers used on the UniPhier platform.
This is the new one with FIFO support, which is used on the Pro4 SoC
or newer.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the UniPhier I2C controller (FIFO-less) binding to DT schema
format.
There are two types of I2C controllers used on the UniPhier platform.
This is the legacy one without FIFO support, which is used on the
sLD8 SoC or older.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Renesas R-Car Serial-ATA Device Tree binding documentation
to json-schema.
While at it:
- Remove the deprecated "renesas,rcar-sata" compatible value,
- Add "iommus", "power-domains", and "resets" properties,
- Update the example.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Rob Herring <robh@kernel.org>
It is no longer needed to wrap URLs in double quotes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
The "alpha by vendor, reverse-alpha by model" sorting of compatibles
that we seem to have ended up with is decidedly odd. Make it less so.
Also copy the comment from the generic "arm,armv8" CPU binding to help
clarify that the "arm,armv8-pmuv3" binding is rather intended to be a
counterpart to that, for describing implementations without a specific
microarchitecture like the AEMv8 software model.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add new PMU definitions to correspond with the CPU bindings.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The CPU group has been busy since we last updated these bindings...
Add definitions for all the new Cortex-A and Neoverse cores now
available.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
There are several DT doc references that require manual fixes.
I found 3 cases fixed on this patch:
- directory named "binding/" instead of "bindings/";
- .txt to .yaml renames;
- file renames (still on txt format);
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Several DT references got broken due to txt->yaml conversion.
Those are auto-fixed by running:
scripts/documentation-file-ref-check --fix
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Commit 1de243b076 ("media: dt-bindings: media: sun4i-csi: Add compatible
for CSI1 on A10/A20") introduced support for the CSI1 controller on A10 and
A20 that unlike CSI0 doesn't have an ISP and therefore only have two
clocks, the bus and module clocks.
The clocks and clock-names properties have thus been modified to allow
either two or tree clocks. However, the current list has the ISP clock at
the second position, which means the bindings expects a list of either
bus and isp, or bus, isp and mod. The initial intent of the patch was
obviously to have bus and mod in the former case.
Let's fix the binding so that it validates properly.
Fixes: 1de243b076 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
The Allwinner CSI controller is sitting beside the MBUS that is represented
as an interconnect.
Make sure that the interconnect properties are valid in the binding.
Fixes: 7866d6903c ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI0 on R40")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
Remove vendor specific compatible string from example, otherwise DT YAML
schemas validation may trigger warnings specific to TI ti,davinci_mdio
and not to the generic MDIO example.
For example, the "bus_freq" is required for davinci_mdio, but not required for
generic mdio example. As result following warning will be produced:
mdio.example.dt.yaml: mdio@5c030000: 'bus_freq' is a required property
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The example in the Tegra124 EMC device tree binding looks like an old
version that doesn't contain all the required fields. Update it with a
version from the current DTS files to fix the make dt_binding_check
target.
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
[robh: also fix missing '#reset-cells']
Signed-off-by: Rob Herring <robh@kernel.org>
Kryo260 is found in SDM660, so add it in list of cpu compatibles
Signed-off-by: Alexey Minnekhanov <alexey.min@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Xiaomi Corporation is a Chinese electronics company.
Signed-off-by: Alexey Minnekhanov <alexey.min@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The Exynos DWC3 driver expects certain clock names, depending on used
compatible. Document this explicitly in the bindings.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
SDIO interrupt must be specified correctly as IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW.
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert can-transceiver property to json-schema
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert etnaviv bindings to yaml format.
Move bindings file from display to gpu folder.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add vendor prefix for OzzMaker [1] and Waveshare Electronics [2]
Both are display manufacturers
[1] https://ozzmaker.com/about/
[2] https://www.waveshare.com/contact_us
Signed-off-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Add vendor prefix for ITE Tech Inc, http://www.ite.com.tw/
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sean Cross <xobs@kosagi.com>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add the specific compatible string for the DWC2 IP found in the STM32MP15
SoCs.
STM32MP15 SoCs uses sensing comparators to detect Vbus valid levels and
ID pin state. usb33d-supply described the regulator supplying Vbus and ID
sensing comparators.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are
more natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
-----BEGIN PGP SIGNATURE-----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=sv4U
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are more
natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: make multiple directory targets work
kconfig: Invalidate all symbols after changing to y or m.
kallsyms: fix type of kallsyms_token_table[]
scripts/kallsyms: change table to store (strcut sym_entry *)
scripts/kallsyms: rename local variables in read_symbol()
kbuild: rename hostprogs-y/always to hostprogs/always-y
kbuild: fix the document to use extra-y for vmlinux.lds
kconfig: fix broken dependency in randconfig-generated .config
Zonefs is a very simple file system exposing each zone of a zoned block
device as a file.
Unlike a regular file system with native zoned block device support
(e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
sequential write constraint of zoned block devices to the user. As a
result, zonefs is not a POSIX compliant file system. Its goal is to
simplify the implementation of zoned block devices support in
applications by replacing raw block device file accesses with a richer
file based API, avoiding relying on direct block device file ioctls
which may be more obscure to developers.
One example of this approach is the implementation of LSM
(log-structured merge) tree structures (such as used in RocksDB and
LevelDB) on zoned block devices by allowing SSTables to be stored in a
zone file similarly to a regular file system rather than as a range of
sectors of a zoned device. The introduction of the higher level
construct "one file is one zone" can help reducing the amount of changes
needed in the application while at the same time allowing the use of
zoned block devices with various programming languages other than C.
Zonefs IO management implementation uses the new iomap generic code.
Zonefs has been successfully tested using a functional test suite
(available with zonefs userland format tool on github) and a prototype
implementation of LevelDB on top of zonefs.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCXj1y8QAKCRDdoc3SxdoY
dqozAP9J3t+Q95BgKgI5jP+XEtyYsPBTaVrvaSaViEnwtJLVoQD/ZQ1lTCZSE9OI
UkvWawkuFtLGfOxTqyA3eZrZi22Ttwk=
=YVvO
-----END PGP SIGNATURE-----
Merge tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull new zonefs file system from Damien Le Moal:
"Zonefs is a very simple file system exposing each zone of a zoned
block device as a file.
Unlike a regular file system with native zoned block device support
(e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
sequential write constraint of zoned block devices to the user. As a
result, zonefs is not a POSIX compliant file system. Its goal is to
simplify the implementation of zoned block devices support in
applications by replacing raw block device file accesses with a richer
file based API, avoiding relying on direct block device file ioctls
which may be more obscure to developers.
One example of this approach is the implementation of LSM
(log-structured merge) tree structures (such as used in RocksDB and
LevelDB) on zoned block devices by allowing SSTables to be stored in a
zone file similarly to a regular file system rather than as a range of
sectors of a zoned device. The introduction of the higher level
construct "one file is one zone" can help reducing the amount of
changes needed in the application while at the same time allowing the
use of zoned block devices with various programming languages other
than C.
Zonefs IO management implementation uses the new iomap generic code.
Zonefs has been successfully tested using a functional test suite
(available with zonefs userland format tool on github) and a prototype
implementation of LevelDB on top of zonefs"
* tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Add documentation
fs: New zonefs file system
Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller pieces
for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
+ Misc cleanups, refactorings of Marvell, TI, other platforms.
-----BEGIN PGP SIGNATURE-----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=ONtb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller
pieces for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support
ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
and misc cleanups, refactorings of Marvell, TI, other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
drivers: soc: xilinx: Use mailbox IPI callback
dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
MAINTAINERS: Add brcmstb PCIe controller entry
soc/tegra: fuse: Unmap registers once they are not needed anymore
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
soc/tegra: fuse: Warn if straps are not ready
soc/tegra: fuse: Cache values of straps and Chip ID registers
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
soc/tegra: regulators: Do nothing if voltage is unchanged
memory: tegra: Correct reset value of xusb_hostr
soc/tegra: fuse: Add APB DMA dependency for Tegra20
bus: tegra-aconnect: Remove PM_CLK dependency
dt-bindings: mediatek: add MT6765 power dt-bindings
soc: mediatek: cmdq: delete not used define
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
...
Most of these are smaller fixes that have accrued, and some continued
cleanup of OMAP platforms towards shared frameworks.
One new SoC from Atmel/Microchip: sam9x60.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl45edcPHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3qpMQAICcEmRfRPKHW7Uwmw1cEhcX7VxnPH0Y2Dnw
ZIoWEdYvE3N9T0UWe2hi3e/ji8R09OttHH9/qLo3+VpgsN8LuaBKMx3vCbiWdJeh
GCva5aFquwImG+EO/jri4CgjbTIxjR/nv6ZSE0FwG0Mg8xHg/MiXE/oCE++a2xz9
snYR5kVZBkgvrsUblPNb1FCIxiWIAytooEvd8H+2LFrXx3A6VvZOFTAPtLSX+Zvo
28VoloOdYyrcn+syyVw0vv/wONqvlgssjOLtG5DrMkjfF9oeqDkuPOcUFJVeI45S
d1uxzPGKoVjYK+fY0Z3VYV+ZwJ5AcDagFdF/vh7PvOuV148UikFOEDWl9SEpFwEI
E9W040UGxDfX8JG/Np3Nvm6WFQntixjfbWWeRVi0io4lwx9HCxrNMgRqCUPyYrXl
3aWBJSRq7tEJgIcba+Q/Urvsh7HjGEHpoFb3FzEp94iJej4R0WN5FNSUNEVgV5Dx
14bz/IRuHgqhRPgLbOtK3/J+LxYVJBiuog1ahLfUID4Vxw9Don48gPJAmyCECVkz
VD7i3VnLQlEtDlhzOVD9NCdVnr7u72iqd3VJQSj7gpDJdHDVGwipl2B664X8cs12
FAQUeJx3UezTUiq4C143vb1SqbgKa6rEYlTEflcQzN1eYA60vtI6p4Xlip02bMy0
wTYIt6Xk
=fIjZ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"Most of these are smaller fixes that have accrued, and some continued
cleanup of OMAP platforms towards shared frameworks.
One new SoC from Atmel/Microchip: sam9x60"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
ARM: OMAP2+: Fix undefined reference to omap_secure_init
ARM: s3c64xx: Drop unneeded select of TIMER_OF
ARM: exynos: Drop unneeded select of MIGHT_HAVE_CACHE_L2X0
ARM: s3c24xx: Switch to atomic pwm API in rx1950
ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers
ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available
ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init()
ARM: OMAP2+: Add omap_secure_init callback hook for secure initialization
ARM: at91: Documentation: add sam9x60 product and datasheet
ARM: at91: pm: use of_device_id array to find the proper shdwc node
ARM: at91: pm: use SAM9X60 PMC's compatible
ARM: imx: only select ARM_ERRATA_814220 for ARMv7-A
ARM: zynq: use physical cpuid in zynq_slcr_cpu_stop/start
ARM: tegra: Use clk_m CPU on Tegra124 LP1 resume
ARM: tegra: Modify reshift divider during LP1
ARM: tegra: Enable PLLP bypass during Tegra124 LP1
ARM: samsung: Rename Samsung and Exynos to lowercase
ARM: exynos: Correct the help text for platform Kconfig option
ARM: bcm: Select ARM_AMBA for ARCH_BRCMSTB
ARM: brcmstb: Add debug UART entry for 7216
...
Pull vfs file system parameter updates from Al Viro:
"Saner fs_parser.c guts and data structures. The system-wide registry
of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
the horror switch() in fs_parse() that would have to grow another case
every time something got added to that system-wide registry.
New syntax types can be added by filesystems easily now, and their
namespace is that of functions - not of system-wide enum members. IOW,
they can be shared or kept private and if some turn out to be widely
useful, we can make them common library helpers, etc., without having
to do anything whatsoever to fs_parse() itself.
And we already get that kind of requests - the thing that finally
pushed me into doing that was "oh, and let's add one for timeouts -
things like 15s or 2h". If some filesystem really wants that, let them
do it. Without somebody having to play gatekeeper for the variants
blessed by direct support in fs_parse(), TYVM.
Quite a bit of boilerplate is gone. And IMO the data structures make a
lot more sense now. -200LoC, while we are at it"
* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
tmpfs: switch to use of invalfc()
cgroup1: switch to use of errorfc() et.al.
procfs: switch to use of invalfc()
hugetlbfs: switch to use of invalfc()
cramfs: switch to use of errofc() et.al.
gfs2: switch to use of errorfc() et.al.
fuse: switch to use errorfc() et.al.
ceph: use errorfc() and friends instead of spelling the prefix out
prefix-handling analogues of errorf() and friends
turn fs_param_is_... into functions
fs_parse: handle optional arguments sanely
fs_parse: fold fs_parameter_desc/fs_parameter_spec
fs_parser: remove fs_parameter_description name field
add prefix to fs_context->log
ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
new primitive: __fs_parse()
switch rbd and libceph to p_log-based primitives
struct p_log, variants of warnf() et.al. taking that one instead
teach logfc() to handle prefices, give it saner calling conventions
get rid of cg_invalf()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXj182AAKCRDh3BK/laaZ
PIiWAQCprdMIBe0u9Rd9cqQYXClOI7PI9oIcpLmkIlHDuUWDgQD/Y4c1UMsN8yQY
d8cYZXMivKKhyY2nRitR1mbv0RPoGwE=
=8hFo
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix a regression introduced in v5.1 that triggers WARNINGs for some
fuse filesystems
- Fix an xfstest failure
- Allow overlayfs to be used on top of fuse/virtiofs
- Code and documentation cleanups
* tag 'fuse-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: use true,false for bool variable
Documentation: filesystems: convert fuse to RST
fuse: Support RENAME_WHITEOUT flag
fuse: don't overflow LLONG_MAX with end offset
fix up iter on short count in fuse_direct_io()
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl49mtYPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y/5sH+wX3mdrcC7pX2XALDvl35P+QB5CFy0v1bkMY
KAi/Ulxd6aicnowsBx6wdqSZO01Bh0E/nc9x42WIbHBR9/J5ZlitpKj5pGi0JYE/
vguMEFgAPQb1dx3EGJ56dxKqJ/+zICVLhf7pawP82QqE6z4Kuonp9AXR1UMRvWej
/b1qobQB++skh+nfGYqt7c7D6MQjaSb+5+TkU6xbHfoeMHDJkNdBHiiM5IbVE/s2
KgAngM7cTYeu4el4h6ue1ZJjbU2iOi1FJU95r2ufMYEt6EEfP2zkzCYXju/xyIbO
2NsdY3xUHhr9H32xkopPMoYrnzuzoTv8xi1xkhsnbOPZzZQMPls=
=zx2k
-----END PGP SIGNATURE-----
Merge tag 'docs-5.6-2' of git://git.lwn.net/linux
Pull Documentation fixes from Jonathan Corbet:
"A handful of small documentation fixes that wandered in"
* tag 'docs-5.6-2' of git://git.lwn.net/linux:
Allow git builds of Sphinx
Documentation: changes.rst: update several outdated project URLs
Documentation: build warnings related to missing blank lines after explicit markups has been fixed
mailmap: add entry for Tiezhu Yang
Documentation/ko_KR/howto: Update a broken link
Documentation/ko_KR/howto: Update broken web addresses
docs/locking: Fix outdated section names
Pull i2c updates from Wolfram Sang:
"i2c core:
- huge improvements and refactorizations of the Linux I2C
documentation (lots of thanks to Luca for doing it and Jean for the
careful review)
- subsystem wide API conversion to i2c_new_client_device()
- remove obsolete parport-light driver
- smaller core updates (removal of 'extern', enabling more compile
testing, use more helper macros)
- and quite a bunch of driver updates (new IDs, simplifications,
better PM, support of atomic transfers and other improvements)
i2c-mux:
- The main feature is the idle-state rework of the pca954x driver
from Biwen Li
at24 driver:
- minor maintenance: update the license tag, sort headers
- move support for the write-protect pin into nvmem core
- add a reference to the new wp-gpios property in nvmem to at25
bindings
- add support for regulator and pm_runtime control"
* 'i2c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (91 commits)
i2c: cros-ec-tunnel: Fix ACPI identifier
i2c: cros-ec-tunnel: Fix slave device enumeration
i2c: stm32f7: add PM_SLEEP suspend/resume support
i2c: cadence: Fix wording in i2c-cadence driver
i2c: cadence: Fix power management order of operations
i2c: cadence: Fix error printing in case of defer
i2c: cadence: Handle transfer_size rollover
i2c: i801: Add support for Intel Comet Lake PCH-V
docs: i2c: writing-clients: properly name the stop condition
docs: i2c: i2c-protocol: use same wording as smbus-protocol
docs: i2c: rename sections so the overall picture is clearer
docs: i2c: old-module-parameters: use monospace instead of ""
docs: i2c: old-module-parameters: clarify this is for obsolete kernels
docs: i2c: old-module-parameters: fix internal hyperlink
docs: i2c: instantiating-devices: use monospace for sysfs attributes
docs: i2c: instantiating-devices: rearrange static instatiation
docs: i2c: instantiating-devices: fix internal hyperlink
docs: i2c: smbus-protocol: improve I2C Block transactions description
docs: i2c: smbus-protocol: fix punctuation
docs: i2c: smbus-protocol: fix typo
...
Update the recently merged CPR (Core Power Reduction) support in the
AVS (Adaptive Voltage Scaling) subsystem (Brendan Higgins, Nathan
Chancellor, Niklas Cassel) and the rockchip-io AVS driver (Heiko
Stuebner), add two more module parameters to intel_idle on top of the
recently merged material, clean up a piece of cpuidle documentation
and consolidate system sleep states documentation (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=Yc9a
-----END PGP SIGNATURE-----
Merge tag 'pm-5.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
- Update the recently merged CPR (Core Power Reduction) support in the
AVS (Adaptive Voltage Scaling) subsystem (Brendan Higgins, Nathan
Chancellor, Niklas Cassel)
- Update the rockchip-io AVS driver (Heiko Stuebner)
- Add two more module parameters to intel_idle on top of the recently
merged material (Rafael Wysocki)
- Clean up a piece of cpuidle documentation and consolidate system
sleep states documentation (Rafael Wysocki)
* tag 'pm-5.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: Documentation: Clean up PM QoS description
Documentation: admin-guide: PM: Update sleep states documentation
intel_idle: Introduce 'states_off' module parameter
intel_idle: Introduce 'use_acpi' module parameter
power: avs: qcom-cpr: Avoid clang -Wsometimes-uninitialized in cpr_scale
power: avs: qcom-cpr: add unspecified HAS_IOMEM dependency
PM / AVS: rockchip-io: fix the supply naming for the emmc supply on px30
power: avs: qcom-cpr: add a printout after the driver has been initialized
- Make of_clk.h self contained
- Fix new qcom DT bindings that just merged to match the DTS files
- Fix qcom clk driver to properly detect DFS clk frequencies
- Fix the ls1028a driver to not deref a pointer before assigning it
-----BEGIN PGP SIGNATURE-----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=fchl
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A collection of fixes:
- Make of_clk.h self contained
- Fix new qcom DT bindings that just merged to match the DTS files
- Fix qcom clk driver to properly detect DFS clk frequencies
- Fix the ls1028a driver to not deref a pointer before assigning it"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
of: clk: Make <linux/of_clk.h> self-contained
clk: qcom: Use ARRAY_SIZE in videocc-sc7180 for parent clocks
clk: qcom: Get rid of the test clock for videocc-sc7180
dt-bindings: clock: Cleanup qcom,videocc bindings for sdm845/sc7180
clk: qcom: Use ARRAY_SIZE in gpucc-sc7180 for parent clocks
clk: qcom: Get rid of the test clock for gpucc-sc7180
dt-bindings: clock: Fix qcom,gpucc bindings for sdm845/sc7180/msm8998
clk: qcom: Use ARRAY_SIZE in dispcc-sc7180 for parent clocks
clk: qcom: Get rid of the test clock for dispcc-sc7180
clk: qcom: Get rid of fallback global names for dispcc-sc7180
dt-bindings: clock: Fix qcom,dispcc bindings for sdm845/sc7180
clk: qcom: rcg2: Don't crash if our parent can't be found; return an error
clk: ls1028a: fix a dereference of pointer 'parent' before a null check
dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft
clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()
Unused now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Its behaviour is identical to that of fs_value_is_filename.
It makes no sense, anyway - LOOKUP_EMPTY affects nothing
whatsoever once the pathname has been imported from userland.
And both fs_value_is_filename and fs_value_is_filename_empty
carry an already imported pathname.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add the new file Documentation/filesystems/zonefs.txt to document
zonefs principles and user-space tool usage.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
* fix register corruption
* ENOTSUPP/EOPNOTSUPP mixed
* reset cleanups/fixes
* selftests
x86:
* Bug fixes and cleanups
* AMD support for APIC virtualization even in combination with
in-kernel PIT or IOAPIC.
MIPS:
* Compilation fix.
Generic:
* Fix refcount overflow for zero page.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeOuf7AAoJEL/70l94x66DOBQH/j1W9lUpbDgr9aWbrZT+O/yP
FWzUDrRlCZCjV1FQKbGPa4YLeDRTG5n+RIQTjmCGRqiMqeoELSJ1+iK99e97nG/u
L28zf/90Nf0R+wwHL4AOFeploTYfG4WP8EVnlr3CG2UCJrNjxN1KU7yRZoWmWa2d
ckLJ8ouwNvx6VZd233LVmT38EP4352d1LyqIL8/+oXDIyAcRJLFQu1gRCwagsh3w
1v1czowFpWnRQ/z9zU7YD+PA4v85/Ge8sVVHlpi1X5NgV/khk4U6B0crAw6M+la+
mTmpz9g56oAh9m9NUdtv4zDCz1EWGH0v8+ZkAajUKtrM0ftJMn57P6p8PH4VVlE=
=5+Wl
-----END PGP SIGNATURE-----
Merge tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"s390:
- fix register corruption
- ENOTSUPP/EOPNOTSUPP mixed
- reset cleanups/fixes
- selftests
x86:
- Bug fixes and cleanups
- AMD support for APIC virtualization even in combination with
in-kernel PIT or IOAPIC.
MIPS:
- Compilation fix.
Generic:
- Fix refcount overflow for zero page"
* tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration
KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit
x86: vmxfeatures: rename features for consistency with KVM and manual
KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses
KVM: x86: Fix perfctr WRMSR for running counters
x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests
x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()
kvm: mmu: Separate generating and setting mmio ptes
kvm: mmu: Replace unsigned with unsigned int for PTE access
KVM: nVMX: Remove stale comment from nested_vmx_load_cr3()
KVM: MIPS: Fold comparecount_func() into comparecount_wakeup()
KVM: MIPS: Fix a build error due to referencing not-yet-defined function
x86/kvm: do not setup pv tlb flush when not paravirtualized
KVM: fix overflow of zero page refcount with ksm running
KVM: x86: Take a u64 when checking for a valid dr7 value
KVM: x86: use raw clock values consistently
KVM: x86: reorganize pvclock_gtod_data members
KVM: nVMX: delete meaningless nested_vmx_run() declaration
KVM: SVM: allow AVIC without split irqchip
kvm: ioapic: Lazy update IOAPIC EOI
...
Converts fuse.txt to reStructuredText format, improving the presentation
without changing much of the underlying content.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
- Added new "bootconfig".
Looks for a file appended to initrd to add boot config options.
This has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and
kprobe events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXjtAURQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qshOAQDzopQmvAVrrI6oogghr8JQA30Z2yqT
i+Ld7vPWL2MV9wEA1S+zLGDSYrj8f/vsCq6BxRYT1ApO+YtmY6LTXiUejwg=
=WNds
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added new "bootconfig".
This looks for a file appended to initrd to add boot config options,
and has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and kprobe
events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
bootconfig: Show the number of nodes on boot message
tools/bootconfig: Show the number of bootconfig nodes
bootconfig: Add more parse error messages
bootconfig: Use bootconfig instead of boot config
ftrace: Protect ftrace_graph_hash with ftrace_sync
ftrace: Add comment to why rcu_dereference_sched() is open coded
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
tracing: Annotate ftrace_graph_hash pointer with __rcu
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
tracing: Use seq_buf for building dynevent_cmd string
tracing: Remove useless code in dynevent_arg_pair_add()
tracing: Remove check_arg() callbacks from dynevent args
tracing: Consolidate some synth_event_trace code
tracing: Fix now invalid var_ref_vals assumption in trace action
tracing: Change trace_boot to use synth_event interface
tracing: Move tracing selftests to bottom of menu
tracing: Move mmio tracer config up with the other tracers
tracing: Move tracing test module configs together
tracing: Move all function tracing configs together
tracing: Documentation for in-kernel synthetic event API
...
This set of changes are mostly cleanups and minor improvements with some
new chip support for some drivers.
-----BEGIN PGP SIGNATURE-----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=x0aH
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Mostly cleanups and minor improvements with some new chip support for
some drivers"
* tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
pwm: Remove set but not set variable 'pwm'
pwm: sun4i: Initialize variables before use
pwm: stm32: Remove automatic output enable
pwm: sun4i: Narrow scope of local variable
pwm: bcm2835: Allow building for ARCH_BRCMSTB
pwm: imx27: Eliminate error message for defer probe
pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR
pwm: sun4i: Move pwm_calculate() out of spin_lock()
pwm: omap-dmtimer: Allow compiling with COMPILE_TEST
pwm: omap-dmtimer: put_device() after of_find_device_by_node()
pwm: omap-dmtimer: Simplify error handling
pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional
pwm: Implement tracing for .get_state() and .apply_state()
pwm: rcar: Document inability to set duty_cycle = 0
pwm: rcar: Drop useless call to pwm_get_state()
pwm: Fix minor Kconfig whitespace issues
pwm: atmel: Implement .get_state()
pwm: atmel: Use register accessors for channels
pwm: atmel: Document known weaknesses of both hardware and software
pwm: atmel: Replace loop in prescale calculation by ad-hoc calculation
...
Including:
- Allow to compile the ARM-SMMU drivers as modules.
- Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
collected by Will Deacon. The merge-commit (6855d1ba75) has all the
details.
- Cleanup of the iommu_put_resv_regions() call-backs in various drivers.
- AMD IOMMU driver cleanups.
- Update for the x2APIC support in the AMD IOMMU driver.
- Preparation patches for Intel VT-d nested mode support.
- RMRR and identity domain handling fixes for the Intel VT-d driver.
- More small fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=HMIT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Allow compiling the ARM-SMMU drivers as modules.
- Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
collected by Will Deacon. The merge-commit (6855d1ba75) has all the
details.
- Cleanup of the iommu_put_resv_regions() call-backs in various
drivers.
- AMD IOMMU driver cleanups.
- Update for the x2APIC support in the AMD IOMMU driver.
- Preparation patches for Intel VT-d nested mode support.
- RMRR and identity domain handling fixes for the Intel VT-d driver.
- More small fixes and cleanups.
* tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
iommu/amd: Remove the unnecessary assignment
iommu/vt-d: Remove unnecessary WARN_ON_ONCE()
iommu/vt-d: Unnecessary to handle default identity domain
iommu/vt-d: Allow devices with RMRRs to use identity domain
iommu/vt-d: Add RMRR base and end addresses sanity check
iommu/vt-d: Mark firmware tainted if RMRR fails sanity check
iommu/amd: Remove unused struct member
iommu/amd: Replace two consecutive readl calls with one readq
iommu/vt-d: Don't reject Host Bridge due to scope mismatch
PCI/ATS: Add PASID stubs
iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device
iommu/arm-smmu-v3: Improve add_device() error handling
iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
iommu/arm-smmu-v3: Add second level of context descriptor table
iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure
iommu/arm-smmu-v3: Propagate ssid_bits
iommu/arm-smmu-v3: Add support for Substream IDs
iommu/arm-smmu-v3: Add context descriptor tables allocators
iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support
ACPI/IORT: Parse SSID property of named component node
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXjrKegAKCRCAXGG7T9hj
vkAzAQDtV8yxItCMTC/0vxMZnBUk7t+KFuSg7UIoWkwHPvd2CQEAjlhWeX0u3z9D
uxwmxdjri1nlrTJBulbvCkJuTfZDYwo=
=8Q8T
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- fix a bug introduced in 5.5 in the Xen gntdev driver
- fix the Xen balloon driver when running on ancient Xen versions
- allow Xen stubdoms to control interrupt enable flags of
passed-through PCI cards
- release resources in Xen backends under memory pressure
* tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/blkback: Consistently insert one empty line between functions
xen/blkback: Remove unnecessary static variable name prefixes
xen/blkback: Squeeze page pools if a memory pressure is detected
xenbus/backend: Protect xenbus callback with lock
xenbus/backend: Add memory pressure handler callback
xen/gntdev: Do not use mm notifiers with autotranslating guests
xen/balloon: Support xend-based toolstack take two
xen-pciback: optionally allow interrupt enable flag writes
- Add KPROBES_ON_FTRACE support.
- Add EP11 AES secure keys support.
- PAES rework and prerequisites for paes-s390 ciphers selftests.
- Fix page table upgrade for hugetlbfs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl465KkACgkQjYWKoQLX
FBiR/wf/e+Fj/mDYHElcZ55MWaORBpp8NT94IYSt0RbII1PEh9cB8NciYLQdFFmc
bUlNj7u3fHwk1D8S3pOSYKhIaHQQOWDqd/uNTzbCicbbVhuwmslLc+jffnORtlKe
mCHeQsVAw3NwE8FIPhPMTAKBZV0pLkM4T9PA2xgeuB5cShoMgXgLgUoIwHJ4c2TP
WwnolIJ/QR0nKpmPI5lp0+PjjSk/8nA/VvmpxgYbJCTQm8dhwhAfePh8Kf6pEp6K
wETUaIyWkX1a+kI9h2qIBsR7KplqqrKABA5sxnPDQW/kut1Pc/2fWxMOBxux0f/V
Kk+f6yoVbe7X6VYm+V4AyyAzQMRggQ==
=9Eeg
-----END PGP SIGNATURE-----
Merge tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
"The second round of s390 fixes and features for 5.6:
- Add KPROBES_ON_FTRACE support
- Add EP11 AES secure keys support
- PAES rework and prerequisites for paes-s390 ciphers selftests
- Fix page table upgrade for hugetlbfs"
* tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pkey/zcrypt: Support EP11 AES secure keys
s390/zcrypt: extend EP11 card and queue sysfs attributes
s390/zcrypt: add new low level ep11 functions support file
s390/zcrypt: ep11 structs rework, export zcrypt_send_ep11_cprb
s390/zcrypt: enable card/domain autoselect on ep11 cprbs
s390/crypto: enable clear key values for paes ciphers
s390/pkey: Add support for key blob with clear key value
s390/crypto: Rework on paes implementation
s390: support KPROBES_ON_FTRACE
s390/mm: fix dynamic pagetable upgrade for hugetlbfs
Update projects URLs in the changes.rst file.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/a9c3c509-8f30-fcc4-d9e0-b53aeaa89e4f@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix for several documentation build warnings related to missing blank lines
after explicit mark up.
Exact warning message:
WARNING: Explicit markup ends without a blank line; unexpected unindent.
Signed-off-by: Sameer Rahmani <lxsameer@gnu.org>
Link: https://lore.kernel.org/r/20200203201543.24834-1-lxsameer@gnu.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Commit 0ea6e61122 ("Documentation: update broken web addresses.")
removed a link to 'http://patchwork.ozlabs.org' in howto, but the change
has not applied to the Korean translation. This commit simply applies
the change to the Korean translation. The link is restored now, though.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Link: https://lore.kernel.org/r/20200131205237.29535-4-sj38.park@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Commit 2e4f5382d1 ("locking/doc: Rename LOCK/UNLOCK to
ACQUIRE/RELEASE") has not appied to 'spinlock.rst'. This commit updates
the doc for the change.
Signed-off-by: SeongJae Park <sjpark@amazon.com>
Link: https://lore.kernel.org/r/20200131205237.29535-2-sj38.park@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As the bootconfig is appended to the initrd it is not as easy to modify as
the kernel command line. If there's some issue with the kernel, and the
developer wants to boot a pristine kernel, it should not be needed to modify
the initrd to remove the bootconfig for a single boot.
As bootconfig is silently added (if the admin does not know where to look
they may not know it's being loaded). It should be explicitly added to the
kernel cmdline. The loading of the bootconfig is only done if "bootconfig"
is on the kernel command line. This will let admins know that the kernel
command line is extended.
Note, after adding printk()s for when the size is too great or the checksum
is wrong, exposed that the current method always looked for the boot config,
and if this size and checksum matched, it would parse it (as if either is
wrong a printk has been added to show this). It's better to only check this
if the boot config is asked to be looked for.
Link: https://lore.kernel.org/r/CAHk-=wjfjO+h6bQzrTf=YCZA53Y3EDyAs3Z4gEsT7icA3u_Psw@mail.gmail.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The $id path checks were inadequately checking the path part of the $id
value. With the check fixed, there's a number of errors that need to be
fixed. Most of the errors are including 'bindings/' in the path which
should not be as that is considered the root.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Stefan Popa <stefan.popa@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: Kent Gustavsson <kent@minoris.se>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Clean up the language in one paragraph in the PM QoS description in
Documentation/admin-guide/pm/cpuidle.rst.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Remove <dt-bindings/clock/intel,lgm-clk.h> dependency as
it is not present in the mainline tree. Use numeric value
instead of LGM_GCLK_PCIE10 macro.
Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
[robh: Also drop interrupt-parent from example]
Signed-off-by: Rob Herring <robh@kernel.org>
Pull networking fixes from David Miller:
1) Use after free in rxrpc_put_local(), from David Howells.
2) Fix 64-bit division error in mlxsw, from Nathan Chancellor.
3) Make sure we clear various bits of TCP state in response to
tcp_disconnect(). From Eric Dumazet.
4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet.
5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen.
6) Fix TC queue mapping in bnxt_en driver, from Michael Chan.
7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data,
snapshot panics, stack out of bounds, etc.)
8) cls_tcindex changes hash table size after allocating the table, fix
from Cong Wang.
9) Fix regression in the enforcement of session ID uniqueness in l2tp.
We only have to enforce uniqueness for IP based tunnels not UDP
ones. From Ridge Kennedy.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
gtp: use __GFP_NOWARN to avoid memalloc warning
l2tp: Allow duplicate session creation with UDP
r8152: Add MAC passthrough support to new device
net_sched: fix an OOB access in cls_tcindex
qed: Remove set but not used variable 'p_link'
tc-testing: add missing 'nsPlugin' to basic.json
tc-testing: fix eBPF tests failure on linux fresh clones
net: hsr: fix possible NULL deref in hsr_handle_frame()
netdevsim: remove unused sdev code
netdevsim: use __GFP_NOWARN to avoid memalloc warning
netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs
netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init()
netdevsim: fix panic in nsim_dev_take_snapshot_write()
netdevsim: disable devlink reload when resources are being used
netdevsim: fix using uninitialized resources
bnxt_en: Fix TC queue mapping.
bnxt_en: Fix logic that disables Bus Master during firmware reset.
bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset.
bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected.
net: stmmac: Delete txtimer in suspend()
...
- Implement user_access_begin() and friends for our platforms that support
controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual
machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and
some other improvements.
- A series to use the PCI hotplug framework to control opencapi card's so that
they can be reset and re-read after flashing a new FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to:
Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan,
Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy,
Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe,
Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus
Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy
Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung
Bauermann, Tyrel Datwyler, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----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=xpG+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"A pretty small batch for us, and apologies for it being a bit late, I
wanted to sneak Christophe's user_access_begin() series in.
Summary:
- Implement user_access_begin() and friends for our platforms that
support controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure"
virtual machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit
VDSO, and some other improvements.
- A series to use the PCI hotplug framework to control opencapi
card's so that they can be reset and re-read after flashing a new
FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy,
Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen
Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof
Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael
Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap,
Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago
Jung Bauermann, Tyrel Datwyler, Vaibhav Jain"
* tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits)
powerpc: configs: Cleanup old Kconfig options
powerpc/configs/skiroot: Enable some more hardening options
powerpc/configs/skiroot: Disable xmon default & enable reboot on panic
powerpc/configs/skiroot: Enable security features
powerpc/configs/skiroot: Update for symbol movement only
powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV
powerpc/configs/skiroot: Drop HID_LOGITECH
powerpc/configs: Drop NET_VENDOR_HP which moved to staging
powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE
powerpc/configs: Drop CONFIG_QLGE which moved to staging
powerpc: Do not consider weak unresolved symbol relocations as bad
powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK
powerpc: indent to improve Kconfig readability
powerpc: Provide initial documentation for PAPR hcalls
powerpc: Implement user_access_save() and user_access_restore()
powerpc: Implement user_access_begin and friends
powerpc/32s: Prepare prevent_user_access() for user_access_end()
powerpc/32s: Drop NULL addr verification
powerpc/kuap: Fix set direction in allow/prevent_user_access()
powerpc/32s: Fix bad_kuap_fault()
...
This adds support for the Mediatek MT8183 SCP, modem remoteproc on
Qualcomm SC7180 platform, audio and sensor remoteprocs on Qualcomm
MSM8998 and audio, compute, modem and sensor remoteprocs on Qualcomm
SM8150.
It adds votes for necessary power-domains for all Qualcomm TrustZone
based remoteproc instances are held, fixes a bug related to remoteproc
drivers registering before the core has been initialized and does clean
up the Qualcomm modem remoteproc driver.
-----BEGIN PGP SIGNATURE-----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=Ns9h
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds support for the Mediatek MT8183 SCP, modem remoteproc on
Qualcomm SC7180 platform, audio and sensor remoteprocs on Qualcomm
MSM8998 and audio, compute, modem and sensor remoteprocs on Qualcomm
SM8150.
It adds votes for necessary power-domains for all Qualcomm TrustZone
based remoteproc instances are held, fixes a bug related to remoteproc
drivers registering before the core has been initialized and does
clean up the Qualcomm modem remoteproc driver"
* tag 'rproc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (21 commits)
remoteproc: qcom: q6v5-mss: Improve readability of reset_assert
remoteproc: qcom: q6v5-mss: Use regmap_read_poll_timeout
remoteproc: qcom: q6v5-mss: Rename boot status timeout
remoteproc: qcom: q6v5-mss: Improve readability across clk handling
remoteproc: use struct_size() helper
remoteproc: Initialize rproc_class before use
rpmsg: add rpmsg support for mt8183 SCP.
remoteproc/mediatek: add SCP support for mt8183
dt-bindings: Add a binding for Mediatek SCP
remoteproc: mss: q6v5-mss: Add modem support on SC7180
dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for SC7180
remoteproc: qcom: pas: Add MSM8998 ADSP and SLPI support
dt-bindings: remoteproc: qcom: Add ADSP and SLPI support for MSM8998 SoC
remoteproc: q6v5-mss: Remove mem clk from the active pool
remoteproc: qcom: Remove unneeded semicolon
remoteproc: qcom: pas: Add auto_boot flag
remoteproc: qcom: pas: Add SM8150 ADSP, CDSP, Modem and SLPI support
dt-bindings: remoteproc: qcom: SM8150 Add ADSP, CDSP, MPSS and SLPI support
remoteproc: qcom: pas: Vote for active/proxy power domains
dt-bindings: remoteproc: qcom: Add power-domain bindings for Q6V5 PAS
...
Merge more updates from Andrew Morton:
"The rest of MM and the rest of everything else: hotfixes, ipc, misc,
procfs, lib, cleanups, arm"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (67 commits)
ARM: dma-api: fix max_pfn off-by-one error in __dma_supported()
treewide: remove redundant IS_ERR() before error code check
include/linux/cpumask.h: don't calculate length of the input string
lib: new testcases for bitmap_parse{_user}
lib: rework bitmap_parse()
lib: make bitmap_parse_user a wrapper on bitmap_parse
lib: add test for bitmap_parse()
bitops: more BITS_TO_* macros
lib/string: add strnchrnul()
proc: convert everything to "struct proc_ops"
proc: decouple proc from VFS with "struct proc_ops"
asm-generic/tlb: provide MMU_GATHER_TABLE_FREE
asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER
asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE
asm-generic/tlb: rename HAVE_RCU_TABLE_FREE
asm-generic/tlb: add missing CONFIG symbol
asm-gemeric/tlb: remove stray function declarations
asm-generic/tlb: avoid potential double flush
mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush
powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case
...
This makes the qcom,videocc bindings match the recent changes to the
dispcc and gpucc.
1. Switched to using "bi_tcxo" instead of "xo".
2. Adds a description for the XO clock. Not terribly important but
nice if it cleanly matches its cousins.
3. Updates the example to use the symbolic name for the RPMH clock and
also show that the real devices are currently using 2 address cells
/ size cells and fixes the spacing on the closing brace.
4. Split into 2 files. In this case they could probably share one
file, but let's be consistent.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.11.I27bbd90045f38cd3218c259526409d52a48efb35@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The qcom,gpucc bindings had a few problems with them:
1. When things were converted to yaml the name of the "gpll0 main"
clock got changed from "gpll0" to "gpll0_main". Change it back for
msm8998.
2. Apparently there is a push not to use purist aliases for clocks but
instead to just use the internal Qualcomm names. For sdm845 and
sc7180 (where the drivers haven't already been changed) move in
this direction.
Things were also getting complicated harder to deal with by jamming
several SoCs into one file. Splitting simplifies things.
Fixes: 5c6f3a36b9 ("dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.7.I513cd73b16665065ae6c22cf594d8b543745e28c@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The qcom,dispcc bindings had a few problems with them:
1. They didn't specify all the clocks that dispcc is a client of.
Specifically on sc7180 there are two clocks from the DSI PHY and
two from the DP PHY. On sdm845 there are actually two DSI PHYs
(each of which has two clocks) and an extra clock from the gcc.
These all need to be specified.
2. The sdm845.dtsi has existed for quite some time without specifying
the clocks. The Linux driver was relying on global names to match
things up. While we should transition things, it should be noted
in the bindings.
3. The names used the bindings for "xo" and "gpll0" didn't match the
names that QC used for these clocks internally and this was causing
confusion / difficulty with their code generation tools. Switched
to the internal names to simplify everyone's lives. It's not quite
as clean in a purist sense but it should avoid headaches. This
officially changes the binding, but that seems OK in this case.
Also note that I updated the example.
Fixes: 5d28e44ba6 ("dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.2.I0c4bbb0f75a0880cd4bd90d8b267271e2375e0d0@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Subsystem:
- the VL_READ and VL_CLR ioctls are now documented and their behavior is
unified across all the drivers.
- RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both REGMAP_I2C and
REGMAP_SPI unecessarily.
Drivers:
- at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and sama5d2
compatibles.
- cmos: solve lost interrupts issue on MS Surface 3
- hym8563: return proper errno when time is invalid
- rv3029: many fixes, nvram support
-----BEGIN PGP SIGNATURE-----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=e1Xr
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The VL_READ and VL_CLR ioctls have been reworked to be more useful.
This will not break userspace as there are very few users and they are
using the integer value as a boolean.
Apart from that, two drivers were reworked and a few fixes here and
there for a net reduction of number of lines.
Summary:
Subsystem:
- the VL_READ and VL_CLR ioctls are now documented and their behavior
is unified across all the drivers.
- RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
REGMAP_I2C and REGMAP_SPI unecessarily.
Drivers:
- at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
sama5d2 compatibles.
- cmos: solve lost interrupts issue on MS Surface 3
- hym8563: return proper errno when time is invalid
- rv3029: many fixes, nvram support"
* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
dt-bindings: rtc: at91rm9200: document clocks property
rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
rtc: Kconfig: select REGMAP_I2C when necessary
rtc: Kconfig: properly indent sd3078 entry
rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
rtc: cmos: Use predefined value for RTC IRQ on legacy x86
rtc: cmos: Stop using shared IRQ
rtc: tps6586x: Use IRQ_NOAUTOEN flag
rtc: at91rm9200: use FIELD_PREP/FIELD_GET
rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
rtc: at91rm9200: move register definitions to C file
rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
dt-bindings: rtc: at91rm9200: convert bindings to json-schema
rtc: at91rm9200: remove procfs information
dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
rtc: pcf8563: Use BIT
rtc: moxart: Convert to SPDX identifier
rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
rtc: rx8025: Remove struct i2c_client from struct rx8025_data
rtc: hym8563: Read the valid flag directly instead of caching it
...
When adding the _{acquire|release|relaxed}() variants of some atomic
operations, it was forgotten to update Documentation/memory_barrier.txt:
smp_mb__{before,after}_atomic() is now intended for all RMW operations
that do not imply a memory barrier.
1)
smp_mb__before_atomic();
atomic_add();
2)
smp_mb__before_atomic();
atomic_xchg_relaxed();
3)
smp_mb__before_atomic();
atomic_fetch_add_relaxed();
Invalid would be:
smp_mb__before_atomic();
atomic_set();
In addition, the patch splits the long sentence into multiple shorter
sentences.
Link: http://lkml.kernel.org/r/20191020123305.14715-2-manfred@colorfullife.com
Fixes: 654672d4ba ("locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations")
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <1vier1@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
the normal collection of driver updates to support new SoCs, fix incorrect
data, and convert various drivers to clk_hw based APIs.
In the core, we allow clk_ops::init() to return an error code now so that we
can fail clk registration if the callback does something like fail to allocate
memory. We also add a new "terminate" clk_op so that things done in
clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now
when critical clks fail to enable and we support changing clk rates and
enable/disable state through debugfs when developers compile the kernel
themselves.
On the driver front, we get support for what seems like a lot of Qualcomm and
NXP SoCs given that those vendors dominate the diffstat. There are a couple new
drivers for Xilinx and Amlogic SoCs too. The updates are all small things like
fixing the way glitch free muxes switch parents, avoiding div-by-zero problems,
or fixing data like parent names. See the updates section below for more
details.
Finally, the "basic" clk types have been converted to support specifying
parents with clk_hw pointers. This work includes an overhaul of the fixed-rate
clk type to be more modern by using clk_hw APIs.
Core:
- Let clk_ops::init() return an error code
- Add a clk_ops::terminate() callback to undo clk_ops::init()
- Warn about critical clks that fail to enable or prepare
- Support dangerous debugfs actions on clks with dead code
New Drivers:
- Support for Xilinx Versal platform clks
- Display clk controller on qcom sc7180
- Video clk controller on qcom sc7180
- Graphics clk controller on qcom sc7180
- CPU PLLs for qcom msm8916
- Move qcom msm8974 gfx3d clk to RPM control
- Display port clk support on qcom sdm845 SoCs
- Global clk controller on qcom ipq6018
- Add a driver for BCLK of Freescale SAI cores
- Add cam, vpe and sgx clock support for TI dra7
- Add aess clock support for TI omap5
- Enable clks for CPUfreq on Allwinner A64 SoCs
- Add Amlogic meson8b DDR clock controller
- Add input clocks to Amlogic meson8b controllers
- Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
- i.MX8MP clk driver support
Updates:
- Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs
- Detect more PRMCU variants in ux500 driver
- Adjust the composite clk type to new way of describing clk parents
- Fixes for clk controllers on qcom msm8998 SoCs
- Fix gmac main clock for TI dra7
- Move TI dra7-atl clock header to correct location
- Fix hidden node name dependency on TI clkctrl clocks
- Fix Amlogic meson8b mali clock update using the glitch free mux
- Fix Amlogic pll driver division by zero at init
- Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols
- Switch more i.MX clk drivers to clk_hw based APIs
- Disable non-functional divider between pll4_audio_div and
pll4_post_div on imx6q
- Fix watchdog2 clock name typo in imx7ulp clock driver
- Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs
- Suppress bind attrs for i.MX8M clock driver
- Add a big comment in imx8qxp-lpcg driver to tell why
devm_platform_ioremap_resource() shouldn't be used for the driver
- A correction on i.MX8MN usb1_ctrl parent clock setting
-----BEGIN PGP SIGNATURE-----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=UjXu
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There are a few changes to the core framework this time around, in
addition to the normal collection of driver updates to support new
SoCs, fix incorrect data, and convert various drivers to clk_hw based
APIs.
In the core, we allow clk_ops::init() to return an error code now so
that we can fail clk registration if the callback does something like
fail to allocate memory. We also add a new "terminate" clk_op so that
things done in clk_ops::init() can be undone, e.g. free memory. We
also spit out a warning now when critical clks fail to enable and we
support changing clk rates and enable/disable state through debugfs
when developers compile the kernel themselves.
On the driver front, we get support for what seems like a lot of
Qualcomm and NXP SoCs given that those vendors dominate the diffstat.
There are a couple new drivers for Xilinx and Amlogic SoCs too. The
updates are all small things like fixing the way glitch free muxes
switch parents, avoiding div-by-zero problems, or fixing data like
parent names. See the updates section below for more details.
Finally, the "basic" clk types have been converted to support
specifying parents with clk_hw pointers. This work includes an
overhaul of the fixed-rate clk type to be more modern by using clk_hw
APIs.
Core:
- Let clk_ops::init() return an error code
- Add a clk_ops::terminate() callback to undo clk_ops::init()
- Warn about critical clks that fail to enable or prepare
- Support dangerous debugfs actions on clks with dead code
New Drivers:
- Support for Xilinx Versal platform clks
- Display clk controller on qcom sc7180
- Video clk controller on qcom sc7180
- Graphics clk controller on qcom sc7180
- CPU PLLs for qcom msm8916
- Move qcom msm8974 gfx3d clk to RPM control
- Display port clk support on qcom sdm845 SoCs
- Global clk controller on qcom ipq6018
- Add a driver for BCLK of Freescale SAI cores
- Add cam, vpe and sgx clock support for TI dra7
- Add aess clock support for TI omap5
- Enable clks for CPUfreq on Allwinner A64 SoCs
- Add Amlogic meson8b DDR clock controller
- Add input clocks to Amlogic meson8b controllers
- Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
- i.MX8MP clk driver support
Updates:
- Convert gpio, fixed-factor, mux, gate, divider basic clks to hw
based APIs
- Detect more PRMCU variants in ux500 driver
- Adjust the composite clk type to new way of describing clk parents
- Fixes for clk controllers on qcom msm8998 SoCs
- Fix gmac main clock for TI dra7
- Move TI dra7-atl clock header to correct location
- Fix hidden node name dependency on TI clkctrl clocks
- Fix Amlogic meson8b mali clock update using the glitch free mux
- Fix Amlogic pll driver division by zero at init
- Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config
symbols
- Switch more i.MX clk drivers to clk_hw based APIs
- Disable non-functional divider between pll4_audio_div and
pll4_post_div on imx6q
- Fix watchdog2 clock name typo in imx7ulp clock driver
- Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M
SoCs
- Suppress bind attrs for i.MX8M clock driver
- Add a big comment in imx8qxp-lpcg driver to tell why
devm_platform_ioremap_resource() shouldn't be used for the driver
- A correction on i.MX8MN usb1_ctrl parent clock setting"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits)
dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id
clk: ls1028a: Fix warning on clamp() usage
clk: qoriq: add ls1088a hwaccel clocks support
clk: ls1028a: Add clock driver for Display output interface
dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
clk: fsl-sai: new driver
dt-bindings: clock: document the fsl-sai driver
clk: composite: add _register_composite_pdata() variants
clk: qcom: rpmh: Sort OF match table
dt-bindings: fix warnings in validation of qcom,gcc.yaml
dt-binding: fix compilation error of the example in qcom,gcc.yaml
clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag
clk: zynqmp: Fix divider calculation
clk: zynqmp: Add support for get max divider
clk: zynqmp: Warn user if clock user are more than allowed
clk: zynqmp: Extend driver for versal
dt-bindings: clock: Add bindings for versal clock driver
clk: ti: clkctrl: Fix hidden dependency to node name
clk: ti: add clkctrl data dra7 sgx
clk: ti: omap5: Add missing AESS clock
...
The 'qcom,gcc.yaml' file failed self-validation (dt_binding_check)
because it required a property to be either (3 entries big),
(3 entries big), or (7 entries big), but not more than one of those
things. That didn't make a ton of sense.
This patch splits all of the exceptional device trees (AKA those that
would have needed if/then/else rules) from qcom,gcc.yaml. It also
cleans up some cruft found while doing that.
After this lands, this worked for me atop clk-next with just the known
error about msm8998:
for f in \
Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc.yaml; do \
ARCH=arm64 make dtbs_check DT_SCHEMA_FILES=$f; \
done
I then picked this patch atop linux-next (next-20200129) and ran:
# Delete broken yaml:
rm Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
ARCH=arm64 make dt_binding_check | grep 'clock/qcom'
...and that didn't seem to indicate problems.
Arbitrary decisions made (yell if you want changed):
- Left all the older devices (where clocks / clock-names weren't
specified) in a single file.
- Didn't make clocks "required" for msm8996 but left them as listed.
This seems a little weird but it matches the old binding.
Misc cleanups as part of this patch:
- Fixed schema id to not have "bindings/" as per Rob [1].
- Listed include files as per Stephen.
- sm8150 was claimed to be same set of clocks as sc7180, but driver
and dts appear to say that "bi_tcxo_ao" doesn't exist. Fixed.
- In "apq8064", "#thermal-sensor-cells" was missing the "#".
- Got rid of "|" at the end of top description since spacing doesn't
matter.
- Changed indentation to consistently 2 spaces (it was 3 in some
places).
- Added period at the end of protected-clocks description.
- No space before ":".
- Updated sc7180/sm8150 example to use the 'qcom,rpmh.h' include.
- Updated sc7180/sm8150 example to use larger address/size cells as
per reality.
- Updated sc7180/sm8150 example to point to the sleep_clk rather than
<0>.
- Made it so that gcc-ipq8074 didn't require #power-domain-cells since
actual dts didn't have it and I got no hits from:
git grep _GDSC include/dt-bindings/clock/qcom,gcc-ipq8074.h
- Made it so that gcc-qcs404 didn't require #power-domain-cells since
actual dts didn't have it and I got no hits from:
git grep _GDSC include/dt-bindings/clock/qcom,gcc-qcs404.h
Noticed, but not done in this patch (volunteers needed):
- Add "aud_ref_clk" to sm8150 bindings / dts even though I found a
reference to it in "gcc-sm8150.c".
- Fix node name in actual ipq8074 to be "clock-controller" (it's gcc).
- Since the example doesn't need phandes to exist, in msm8998 could
just make up places providing some of the clocks currently bogused
out with <0>.
- On msm8998 clocks are listed as required but current dts doesn't
have them.
[1] https://lore.kernel.org/r/CAL_Jsq+_2E-bAbP9F6VYkWRp0crEyRGa5peuwP58-PZniVny7w@mail.gmail.com
Fixes: ab91f72e01 ("clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20200203094843.v3.1.I4452dc951d7556ede422835268742b25a18b356b@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Having 'bindings' in here causes a warning when checking the schema.
Documentation/devicetree/bindings/clock/fsl,plldig.yaml:
$id: relative path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/clock/fsl,plldig.yaml#
Remove it.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Wen He <wen.he_1@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200203052507.93215-2-sboyd@kernel.org
Acked-by: Rob Herring <robh@kernel.org>
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The difference between "always" and "extra-y" is that the targets
listed in $(always) are always built, whereas the ones in $(extra-y)
are built only when KBUILD_BUILTIN is set.
So, "make modules" does not build the targets in $(extra-y).
vmlinux.lds is only needed for linking vmlinux. So, adding it to extra-y
is more correct. In fact, arch/x86/kernel/Makefile does this.
Fix the example code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Add support for ROHM BD71828 PMICs and GPIOs
- Add support for Qualcomm Aqstic Audio Codecs WCD9340 and WCD9341
- New Device Support
- Add support for BD71828 to BD70528 RTC driver
- Add support for Intel's Jasper Lake to LPSS PCI
- New Functionality
- Add support for Power Key to ROHM BD71828
- Add support for Clocks to ROHM BD71828
- Add support for GPIOs to Dialog DA9062
- Add support for USB PD Notify to ChromiumOS EC
- Allow callers to specify args when requesting regmap lookup; syscon
- Fix-ups
- Improve error handling and sanity checking; atmel-hlcdc, dln2
- Device Tree support/documentation; bd71828, da9062, xylon,logicvc,
ab8500, max14577, atmel-usart
- Match devices using platform IDs; bd7xxxx
- Refactor BD718x7 regulator component; bd718x7-regulator
- Use standard interfaces/helpers; syscon, sm501
- Trivial (whitespace, spelling, etc); ab8500-core, Kconfig
- Remove unused code; db8500-prcmu, tqmx86
- Wait until boot has finished before accessing registers; madera-core
- Provide missing register value defaults; cs47l15-tables
- Allow more time for hardware to reset; madera-core
- Bug Fixes
- Fix erroneous register values; rohm-bd70528
- Fix register volatility; axp20x, rn5t618
- Fix Kconfig dependencies; MFD_MAX77650
- Fix incorrect compatible string; da9062-core
- Fix syscon_regmap_lookup_by_phandle_args() stub; syscon
-----BEGIN PGP SIGNATURE-----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=t4+B
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for ROHM BD71828 PMICs and GPIOs
- Add support for Qualcomm Aqstic Audio Codecs WCD9340 and WCD9341
New Device Support:
- Add support for BD71828 to BD70528 RTC driver
- Add support for Intel's Jasper Lake to LPSS PCI
New Functionality:
- Add support for Power Key to ROHM BD71828
- Add support for Clocks to ROHM BD71828
- Add support for GPIOs to Dialog DA9062
- Add support for USB PD Notify to ChromiumOS EC
- Allow callers to specify args when requesting regmap lookup; syscon
Fix-ups:
- Improve error handling and sanity checking; atmel-hlcdc, dln2
- Device Tree support/documentation; bd71828, da9062, xylon,logicvc,
ab8500, max14577, atmel-usart
- Match devices using platform IDs; bd7xxxx
- Refactor BD718x7 regulator component; bd718x7-regulator
- Use standard interfaces/helpers; syscon, sm501
- Trivial (whitespace, spelling, etc); ab8500-core, Kconfig
- Remove unused code; db8500-prcmu, tqmx86
- Wait until boot has finished before accessing registers;
madera-core
- Provide missing register value defaults; cs47l15-tables
- Allow more time for hardware to reset; madera-core
Bug Fixes:
- Fix erroneous register values; rohm-bd70528
- Fix register volatility; axp20x, rn5t618
- Fix Kconfig dependencies; MFD_MAX77650
- Fix incorrect compatible string; da9062-core
- Fix syscon_regmap_lookup_by_phandle_args() stub; syscon"
* tag 'mfd-next-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits)
mfd: syscon: Fix syscon_regmap_lookup_by_phandle_args() dummy
mfd: wcd934x: Add support to wcd9340/wcd9341 codec
mfd: syscon: Add arguments support for syscon reference
mfd: rn5t618: Mark ADC control register volatile
dt-bindings: atmel-usart: Add microchip,sam9x60-{usart, dbgu}
dt-bindings: atmel-usart: Remove wildcard
mfd: cros_ec: Add cros-usbpd-notify subdevice
mfd: da9062: Fix watchdog compatible string
mfd: madera: Allow more time for hardware reset
mfd: cs47l15: Add missing register default
mfd: madera: Wait for boot done before accessing any other registers
mfd: Kconfig: Rename Samsung to lowercase
mfd: tqmx86: remove set but not used variable 'i2c_ien'
mfd: dbx500-prcmu: Drop DSI pll clock functions
mfd: dbx500-prcmu: Drop set_display_clocks()
mfd: max77650: Select REGMAP_IRQ in Kconfig
mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile
mfd: ab8500: Fix ab8500-clk typo
mfd: intel-lpss: Add Intel Jasper Lake PCI IDs
dt-bindings: mfd: max14577: Add reference to max14040_battery.txt descriptions
...
There is some information in Documentation/power/interface.rst that
is still missing from Documentation/admin-guide/pm/sleep-states.rst
and really should be present in there, so update the latter by
adding that information to it and delete the former (as it becomes
redundant after that and it is somewhat outdated).
While at it, clean up some assorted pieces of sleep-states.rst a bit.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In certain system configurations it may not be desirable to use some
C-states assumed to be available by intel_idle and the driver needs
to be prevented from using them even before the cpuidle sysfs
interface becomes accessible to user space. Currently, the only way
to achieve that is by setting the 'max_cstate' module parameter to a
value lower than the index of the shallowest of the C-states in
question, but that may be overly intrusive, because it effectively
makes all of the idle states deeper than the 'max_cstate' one go
away (and the C-state to avoid may be in the middle of the range
normally regarded as available).
To allow that limitation to be overcome, introduce a new module
parameter called 'states_off' to represent a list of idle states to
be disabled by default in the form of a bitmask and update the
documentation to cover it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For diagnostics, it is generally useful to be able to make intel_idle
take the system's ACPI tables into consideration even if that is not
required for the processor model in there, so introduce a new module
parameter, 'use_acpi', to make that happen and update the documentation
to cover it.
While at it, fix the 'no_acpi' module parameter name in the
documentation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCXjcdxAAKCRAw5/Bqldv6
8g5kAKCcClcrvY0mPQSHU9Q+qzhU0IV/MwCeKVMIWkkbjY5IqEjV3aCBGTodGBY=
=7qGY
-----END PGP SIGNATURE-----
Merge tag 'leds-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
- New driver for TI TPS6105X
- Add managed API to get a LED from a device driver
- Misc fixes and updates
* tag 'leds-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (22 commits)
leds: lm3692x: Disable chip on brightness 0
leds: lm3692x: Split out lm3692x_leds_disable
leds: lm3692x: Move lm3692x_init and rename to lm3692x_leds_enable
leds: lm3692x: Make sure we don't exceed the maximum LED current
dt: bindings: lm3692x: Add led-max-microamp property
leds: lm3692x: Allow to configure over voltage protection
dt: bindings: lm3692x: Add ti,ovp-microvolt property
leds: populate the device's of_node
leds: Add managed API to get a LED from a device driver
leds: Add of_led_get() and led_put()
leds: lm3532: add pointer to documentation and fix typo
leds: lm3532: use extended registration so that LED can be used for backlight
leds: lm3642: remove warnings for bad strtol, cleanup gotos
leds: rb532: cleanup whitespace
ledtrig-pattern: fix email address quoting in MODULE_AUTHOR()
dt-bindings: mfd: update TI tps6105x chip bindings
leds: tps6105x: add driver for MFD chip LED mode
led: max77650: add of_match table
leds: bd2802: Convert to use GPIO descriptors
leds: pca963x: Fix open-drain initialization
...
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix suspicious RCU usage in ipset, from Jozsef Kadlecsik.
2) Use kvcalloc, from Joe Perches.
3) Flush flowtable hardware workqueue after garbage collection run,
from Paul Blakey.
4) Missing flowtable hardware workqueue flush from nf_flow_table_free(),
also from Paul.
5) Restore NF_FLOW_HW_DEAD in flow_offload_work_del(), from Paul.
6) Flowtable documentation fixes, from Matteo Croce.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- add 'yes2modconfig' and 'mod2yesconfig' targets
- sanitize help text
- various code cleanups
-----BEGIN PGP SIGNATURE-----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=FgLk
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- add 'yes2modconfig' and 'mod2yesconfig' targets (useful mainly for
turning syzbot configs into more modular ones as a step to minimizing
the result)
- sanitize help text
- various code cleanups
* tag 'kconfig-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix documentation typos
kconfig: fix an "implicit declaration of function" warning
kconfig: fix nesting of symbol help text
kconfig: distinguish between dependencies and visibility in help text
kconfig: list all definitions of a symbol in help text
kconfig: Add yes2modconfig and mod2yesconfig targets.
kconfig: use $(PERL) in Makefile
kconfig: fix too deep indentation in Makefile
kconfig: localmodconfig: fix indentation for closing brace
kconfig: localmodconfig: remove unused $config
kconfig: squash prop_alloc() into menu_add_prop()
kconfig: remove sym from struct property
kconfig: remove 'prompt' argument from menu_add_prop()
kconfig: move prompt handling to menu_add_prompt() from menu_add_prop()
kconfig: remove 'prompt' symbol
kconfig: drop T_WORD from the RHS of 'prompt' symbol
kconfig: use parent->dep as the parentdep of 'menu'
kconfig: remove the rootmenu check in menu_add_prop()
- detect missing include guard in UAPI headers
- do not create orphan built-in.a or obj-y objects
- generate modules.builtin more simply, and drop tristate.conf
- simplify built-in initramfs creation
- make linux-headers deb package thinner
- optimize the deb package build script
- misc cleanups
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl409uwVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsG6vAP/jky7LSuv6lpIcYhxOmzFfs7qTlA
llZDmzTPi26/doV1P9LYMw6Pd4HV6Zeo/aFLolirCsp0kFBW/5b2C68OsXfotJOD
0YxPeFMIsumsmAVdQ7lGQerS19BDcMrFJiKoLUuULH3bH0mjL/YVlFVg0Dmq77j1
PDsyTihROajVmJBf8UMK65nUdCSLZihBsKyvj7SxYnlHAS1EaAT+RiwE7qAHoYW9
C3TYwOa1e8u/0FmosKxSChl9Pq5ti/gcK4dVLs7bm4LmJEsqmLeR8BDM8xlaT/FE
lFl7iPLO2cvhy76NsK8YBnTcRD445gBn+M3XFKZ3sDTVj7TkdaIWtVurf5IYo+BN
bTJHac1E9nbpv6L7QIXhxLCGozEi0+pv/8pyhIrAv8XxmZXp7HJbon+siEg8Glez
rbwM44kNPQk8xovVcoixh4+qRH9l49+zzT0h0kY1PWfJ6hp0D1xmG/v3kai8dErt
X4w7xi5gOssYwZ5M0LuOQprDeL5DV/Caz5R1+maqVb2yhn2EBsJ6wC24/vawxhFj
Kjx1g/NZIW4lnBrF1Ay4geF+f+0jd1bcTBqtNmC09uSTIBvEysZ3HNBf4Z9PFTGW
jdQ7Qpowgy9SOLqZuE+OAuojq7xhfm1fkm/MBUFUYh/HKOXoiLAnVK1+x0BM0yJB
ZhMwvmj9fKoqVpzx
=i/xZ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- detect missing include guard in UAPI headers
- do not create orphan built-in.a or obj-y objects
- generate modules.builtin more simply, and drop tristate.conf
- simplify built-in initramfs creation
- make linux-headers deb package thinner
- optimize the deb package build script
- misc cleanups
* tag 'kbuild-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
builddeb: split libc headers deployment out into a function
builddeb: split kernel headers deployment out into a function
builddeb: remove redundant make for ARCH=um
builddeb: avoid invoking sub-shells where possible
builddeb: remove redundant $objtree/
builddeb: match temporary directory name to the package name
builddeb: remove unneeded files in hdrobjfiles for headers package
kbuild: use -S instead of -E for precise cc-option test in Kconfig
builddeb: allow selection of .deb compressor
kbuild: remove 'Building modules, stage 2.' log
kbuild: remove *.tmp file when filechk fails
kbuild: remove PYTHON2 variable
modpost: assume STT_SPARC_REGISTER is defined
gen_initramfs.sh: remove intermediate cpio_list on errors
initramfs: refactor the initramfs build rules
gen_initramfs.sh: always output cpio even without -o option
initramfs: add default_cpio_list, and delete -d option support
initramfs: generate dependency list and cpio at the same time
initramfs: specify $(src)/gen_initramfs.sh as a prerequisite in Makefile
initramfs: make initramfs compression choice non-optional
...
