Commit Graph

634011 Commits

Author SHA1 Message Date
Peter Ujfalusi
3a3caf305f drm/omap: panel-sharp-ls037v7dw01: Add note for incorrect data drive edge
According to the datasheet of the panel, both data, DEN and sync signals
are expected to be driven on the falling edge of the DOTCLK.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
737b513b4c drm/omap: panel-tpo-td028ttec1: Add note for incorrect sync drive edge
According to the datasheet of the panel, both data, DEN and sync signals
are expected to be driven on the falling edge of the DOTCLK.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
26a8d210d2 drm/omap: panel-tpo-td043mtea1: Add note for incorrect sync drive edge
According to the datasheet of the panel, both data, DEN and sync signals
are expected to be driven on the falling edge of the DOTCLK.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
da11bbbb10 drm/omap: Use consistent name for struct videomode
Use 'vm' to refer to a struct videomode instead of 'p', 't', 'timings' or
something else.

The code will be easier to follow if we use consistent names.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
4520ff28aa drm/omap: Replace struct omap_video_timings with videomode
omap_video_timings can be replaced with the generic videomode in omapdrm
and the omap_video_timings can be removed.

This patch will replace the omap_video_timings with videomode.
With the change we no longer need the functions to convert to/from
videomode and drm_display_mode to omap_video_timings, these can be removed
as well.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
7aa91e76ae drm/omap: Change the types of struct omap_video_timings members
omap_video_timings struct have the same members as struct videomode, but
their types are different. As first step change the types of the
omap_video_timings struct members to match their counterpart in
struct videomode to catch any type cast related issues.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
d34afb73c3 drm/omap: omap_display_timings: Use display_flags for sync edge
In preparation to move the stack to use the generic videmode struct for
display timing information use display_flags for sync edge.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
f149e17a7b drm/omap: omap_display_timings: Use display_flags for pixel data edge
In preparation to move the stack to use the generic videmode struct for
display timing information use display_flags for pixel data edge.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
531efb380c drm/omap: omap_display_timings: Use display_flags for double_pixel mode
In preparation to move the stack to use the generic videmode struct for
display timing information use display_flags for double_pixel mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
3fa3ab4a88 drm/omap: omap_display_timings: Use display_flags for DE level
In preparation to move the stack to use the generic videmode struct for
display timing information use display_flags for DE level.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
6b44cd2748 drm/omap: omap_display_timings: Use display_flags for h/vsync level
In preparation to move the stack to use the generic videmode struct for
display timing information use display_flags for h/vsync level.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
3b592939b7 drm/omap: dispc: Simplify _dispc_mgr_set_lcd_timings() parameters
Instead of passing the omap_video_timings structure's members individually,
use the pointer to the struct.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
530582998a drm/omap: omap_display_timings: Use display_flags for interlace mode
Remove the interlace member and add display_flags to omap_video_timings to
configure the interlace mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
fe70cd7667 drm/omap: HDMI5: Use pointer to cfg->v_fc_config.timings in hdmi_core_video_config
By using a pointer to the omap_mode_timings struct we can unwrap lines to
make the code easier to follow.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
458540c606 drm/omap: omap_display_timings: rename vbp to vback_porch
In preparation to move the stack to use the generic videmode struct for
display timing information rename the vbp member to vback_porch.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
0996c68e1b drm/omap: omap_display_timings: rename vfp to vfront_porch
In preparation to move the stack to use the generic videmode struct for
display timing information rename the vfp member to vfront_porch.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
d5bcf0aa3f drm/omap: omap_display_timings: rename vsw to vsync_len
In preparation to move the stack to use the generic videmode struct for
display timing information rename the vsw member to vsync_len.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
a85f4a8078 drm/omap: omap_display_timings: rename hbp to hback_porch
In preparation to move the stack to use the generic videmode struct for
display timing information rename the hbp member to hback_porch.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
0a30e150f0 drm/omap: omap_display_timings: rename hfp to hfront_porch
In preparation to move the stack to use the generic videmode struct for
display timing information rename the hfp member to hfront_porch.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
4dc2250d7d drm/omap: omap_display_timings: rename hsw to hsync_len
In preparation to move the stack to use the generic videmode struct for
display timing information rename the hsw member to hsync_len.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
fb7f3c4399 drm/omap: omap_display_timings: rename y_res to vactive
In preparation to move the stack to use the generic videmode struct for
display timing information rename the y_res member to vactive.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
81899060de drm/omap: omap_display_timings: rename x_res to hactive
In preparation to move the stack to use the generic videmode struct for
display timing information rename the x_res member to hactive.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
bd9642b9b8 video: of: display_timing: Add support for syncclk-active property
Configure the DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE flags according to the
binding document.
If the syncclk-active is present in DT, configure the flags accordingly, if
it is omitted it means that the SYNC edge is following the pixdata
configuration.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: devicetree@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
e886fecbe7 video: display_timing: Add flags to select the edge when the sync is driven
The sync can be - and for some panels it must be - driven on different edge
then the data.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: devicetree@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Peter Ujfalusi
86f46565df dt-bindings: display: display-timing: Add property to configure sync drive edge
There are display panels which demands that the sync signal is driven on
different edge than the pixel data.
With the syncclk-active property we can specify the clk edge to be used to
drive the sync signal. When the property is missing it indicates that the
sync is driven on the same edge as the pixel data.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Wei Yongjun
bda63d5c70 drm/omap: fix return value check in dsi_bind()
Fix the retrn value check which testing the wrong variable
in dsi_bind().

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:38:28 +02:00
Peter Ujfalusi
6cb096562e drm/omap: omap_gem: Do not try to unmap page which is not mapped
It might be possible that the page has been unmapped already in
omap_gem_cpu_sync() so check before calling dma_unmap_page().

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:38:28 +02:00
Jyri Sarha
a7e8cd39af drm/omapdrm: Remove double gamma table write in omap_crtc_atomic_flush()
Remove double gamma table write in omap_crtc_atomic_flush().
Fixes commit 492a426a2f
("drm/omapdrm: Implement gamma_lut atomic crtc properties")

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:38:28 +02:00
Andrew F. Davis
0cac5b61ff drm/omap: remove unneeded conversions to bool
Found with scripts/coccinelle/misc/boolconv.cocci.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:38:28 +02:00
Tomi Valkeinen
cfb73f202d drm/omap: print error instead of WARN() if plane setup fails
omap_plane_atomic_update() does WARN_ON() if dispc rejects the given
plane config. Change that to dev_err() to lessen the possible spam.

To fix this correctly, the plane setup needs much more work by creating
a check function for dispc setup, so that we could reliably check the
config in atomic_check, instead of only noticing the problem when
programming dispc.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:38:28 +02:00
Tomi Valkeinen
70dd2a62aa drm/omap: cleanup omap_plane_atomic_check()
Clean up omap_plane_atomic_check() with:

- Check state->fb first. If no fb, return 0.
- use drm_atomic_get_existing_crtc_state() instead of
  drm_atomic_get_crtc_state()

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:38:28 +02:00
Tomi Valkeinen
aaf7642e98 drm/omap: fix plane check when crtc is disabled
I sometimes see:

[drm:drm_framebuffer_remove [drm]] *ERROR* failed to reset crtc ed2a6c00
when fb was deleted: -22

which comes from drm_framebuffer_remove() when it's disabling the crtc
with zeroed drm_mode_set.

The problem in omap_plane_atomic_check() is that it will use those
zeroed fields to verify if the setup is correct.

This patch makes omap_plane_atomic_check() return 0 if the crtc is
disabled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:38:28 +02:00
Dave Airlie
fb422950c6 Merge branch 'linux-4.9' of git://github.com/skeggsb/linux into drm-next
Karol's work which greatly improves volt/clock changes on a
heap of boards, nothing too exciting beyond a random collection of fixes.

* 'linux-4.9' of git://github.com/skeggsb/linux: (33 commits)
  drm/nouveau/fb/nv50: defer DMA mapping of scratch page to oneinit() hook
  drm/nouveau/fb/gf100: defer DMA mapping of scratch page to oneinit() hook
  drm/nouveau/pci: set streaming DMA mask early
  drm/nouveau/kms: add Maxwell to backlight initialization
  drm/nouveau/bar/nv50: fix bar2 vm size
  drm/nouveau/disp: remove unused function in sorg94.c
  drm/nouveau/volt: use kernel's 64-bit signed division function
  drm/nouveau/core: add missing header dependencies
  drm/nouveau/gr/nv3x: add 0x0597 kelvin 3d class support
  drm/nouveau/drm/nouveau: add a LED driver for the NVIDIA logo
  drm/nouveau/fb/ram: Use Kepler implementation on Maxwell
  drm/nouveau/volt: Make use of cvb coefficients
  drm/nouveau/volt/gf100-: Add speedo
  drm/nouveau/volt: Add implementation for gf100
  drm/nouveau/bios/vmap: unk0 field is the mode
  drm/nouveau/volt: Don't require perfect fit
  drm/nouveau/clk: Allow boosting only when NvBoost is set
  drm/nouveau/bios: Add parsing of VPSTATE table
  drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog
  drm/nouveau/clk: Fixup cstate selection
  ...
2016-10-28 14:24:56 +10:00
Dave Airlie
220196b384 Merge tag 'topic/drm-misc-2016-10-27' of git://anongit.freedesktop.org/git/drm-intel into drm-next
Pull request already again to get the s/fence/dma_fence/ stuff in and
allow everyone to resync. Otherwise really just misc stuff all over, and a
new bridge driver.

* tag 'topic/drm-misc-2016-10-27' of git://anongit.freedesktop.org/git/drm-intel:
  drm/bridge: fix platform_no_drv_owner.cocci warnings
  drm/bridge: fix semicolon.cocci warnings
  drm: Print some debug/error info during DP dual mode detect
  drm: mark drm_of_component_match_add dummy inline
  drm/bridge: add Silicon Image SiI8620 driver
  dt-bindings: add Silicon Image SiI8620 bridge bindings
  video: add header file for Mobile High-Definition Link (MHL) interface
  drm: convert DT component matching to component_match_add_release()
  dma-buf: Rename struct fence to dma_fence
  dma-buf/fence: add an lockdep_assert_held()
  drm/dp: Factor out helper to distinguish between branch and sink devices
  drm/edid: Only print the bad edid when aborting
  drm/msm: add missing header dependencies
  drm/msm/adreno: move function declarations to header file
  drm/i2c/tda998x: mark symbol static where possible
  doc: add missing docbook parameter for fence-array
  drm: RIP mode_config->rotation_property
  drm/msm/mdp5: Advertize 180 degree rotation
  drm/msm/mdp5: Use per-plane rotation property
2016-10-28 11:33:52 +10:00
Dave Airlie
a1873c6271 Merge branch 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux into drm-next
First new feature pull for 4.10.  Highlights:
- Support for multple virtual displays in the virtual dce component
- New VM mgr to support non-contiguous vram buffers
- Support for UVD powergating on additional asics
- Power management improvements
- lots of code cleanup and bug fixes

* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (107 commits)
  drm/amdgpu: turn on/off uvd clock when dpm enable/disable on CI
  drm/amdgpu: disable dpm before turn off clock when vce idle.
  drm/amdgpu: enable uvd bypass mode for CI/VI.
  drm/amdgpu: just not load smc firmware if smu is already running
  drm/amdgpu: when suspend, set boot state instand of disable dpm.
  drm/amdgpu: use failed label to handle context init failure
  drm/amdgpu: add amdgpu_ttm_bo_eviction_valuable callback
  drm/ttm: make eviction decision a driver callback v2
  drm/ttm: fix coding style in ttm_bo_driver.h
  drm/radeon/pm: autoswitch power state when in balanced mode
  drm/amd/powerplay: fix spelling mistake and add KERN_WARNING to printks
  drm/amdgpu:new ids flag for preempt
  drm/amdgpu: mark symbols static where possible
  drm/amdgpu: change function declarations and add missing header dependencies
  drm/amdgpu: s/amdgpuCrtc/amdgpu_crtc/ in pageflip code
  drm/amdgpu/atom: remove a bunch of unused functions
  drm/amdgpu: consolidate atom scratch reg handling for hangs
  drm/amdgpu: use amdgpu_bo_[create|free]_kernel for wb
  drm/amdgpu: add VCE VM session tracking
  drm/amdgpu: improve parse_cs handling a bit
  ...
2016-10-28 10:35:59 +10:00
Rex Zhu
3495a10357 drm/amdgpu: turn on/off uvd clock when dpm enable/disable on CI
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-27 15:18:58 -04:00
Rex Zhu
415282b15e drm/amdgpu: disable dpm before turn off clock when vce idle.
v2: move return value check as well

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-27 15:18:48 -04:00
Rex Zhu
4be5097ccb drm/amdgpu: enable uvd bypass mode for CI/VI.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-27 15:18:38 -04:00
Rex Zhu
3f767e3d07 drm/amdgpu: just not load smc firmware if smu is already running
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-27 15:18:29 -04:00
Rex Zhu
86f8c599b0 drm/amdgpu: when suspend, set boot state instand of disable dpm.
fix pm-hibernate bug, when suspend/resume, dpm start failed.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-27 15:18:19 -04:00
Huang Rui
8ed8147abc drm/amdgpu: use failed label to handle context init failure
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-27 15:18:09 -04:00
kbuild test robot
56df51d003 drm/bridge: fix platform_no_drv_owner.cocci warnings
drivers/gpu/drm/bridge/sil-sii8620.c:1556:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

CC: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161026165836.GA98766@lkp-sb04.lkp.intel.com
2016-10-27 11:35:23 +05:30
kbuild test robot
3a81e96094 drm/bridge: fix semicolon.cocci warnings
drivers/gpu/drm/bridge/sil-sii8620.c:988:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161026165836.GA98907@lkp-sb04.lkp.intel.com
2016-10-27 11:34:21 +05:30
Imre Deak
9ff7a1b0ba drm: Print some debug/error info during DP dual mode detect
There's at least one LSPCON device that occasionally returns an unexpected
adaptor ID which leads to a failed detect. Print some debug info to help
debugging this and future cases. Also print an error for an unexpected
adaptor ID, so users can report it.

v2:
- s/adapter/adaptor/ and add code comment about incorrect type 1 adaptor
  IDs. (Ville)

Cc: dri-devel@lists.freedesktop.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1477499359-12001-1-git-send-email-imre.deak@intel.com
2016-10-26 15:57:11 -04:00
Arnd Bergmann
329f4c812a drm: mark drm_of_component_match_add dummy inline
The newly added drm_of_component_match_add helper is defined as
'static' in a header when CONFIG_OF is disabled, causing a warning
each time the header is included:

In file included from /git/arm-soc/drivers/gpu/drm/bridge/dw-hdmi.c:23:0:
include/drm/drm_of.h:33:13: error: 'drm_of_component_match_add' defined but not used [-Werror=unused-function]

This marks it 'inline' like the other such helpers in this file.

Fixes: 97ac0e47ae ("drm: convert DT component matching to component_match_add_release()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161026085759.3875472-1-arnd@arndb.de
2016-10-26 15:48:42 -04:00
Andrzej Hajda
ce6e153f41 drm/bridge: add Silicon Image SiI8620 driver
SiI8620 transmitter converts eTMDS/HDMI signal to MHL 3.0.
It is controlled via I2C bus. Its interaction with other
devices in video pipeline is performed mainly on HW level.
The only interaction it does on device driver level is
filtering-out unsupported video modes, it exposes drm_bridge
interface to perform this operation.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476085157-5266-1-git-send-email-a.hajda@samsung.com
2016-10-26 11:19:12 +05:30
Andrzej Hajda
4397752c2e dt-bindings: add Silicon Image SiI8620 bridge bindings
SiI8620 transmitter converts eTMDS/HDMI signal to MHL 3.0. It is controlled
via I2C bus.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1475823762-16237-3-git-send-email-a.hajda@samsung.com
2016-10-26 10:30:21 +05:30
Andrzej Hajda
00c635e5a4 video: add header file for Mobile High-Definition Link (MHL) interface
This header adds definitions specific to MHL protocol.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1475823762-16237-2-git-send-email-a.hajda@samsung.com
2016-10-26 10:29:58 +05:30
Christian König
9982ca681e drm/amdgpu: add amdgpu_ttm_bo_eviction_valuable callback
This way we can correctly check split VRAM buffers as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-25 14:44:04 -04:00
Christian König
a2ab19fed9 drm/ttm: make eviction decision a driver callback v2
This way the driver can decide if it is valuable to evict a BO or not.

The current implementation is added as default to all existing drivers.

v2: fix some typos found during internal testing

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-25 14:44:04 -04:00