Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic Synopsys DW-HDMI specifics over to YAML schemas.
The original example and usage of clock-names uses a reversed "isfr"
and "iahb" clock-names, the rewritten YAML bindings uses the reversed
instead of fixing the device trees order.
The #sound-dai-cells optional property has been added to match this node
as a sound dai.
The port connection table has been dropped in favor of a description
of each port.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808085522.21950-2-narmstrong@baylibre.com
Be more consistent with the naming of the other DMA-buf objects.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/323401/
The only remaining use for this is to protect against setting a new exclusive
fence while we grab both exclusive and shared. That can also be archived by
looking if the exclusive fence has changed or not after completing the
operation.
v2: switch setting excl fence to rcu_assign_pointer
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/322380/
During release of the syncpt, we remove it from the list of syncpt and
the tree, but only if it is not already been removed. However, during
signaling, we first remove the syncpt from the list. So, if we
concurrently free and signal the syncpt, the free may decide that it is
not part of the tree and immediately free itself -- meanwhile the
signaler goes on to use the now freed datastructure.
In particular, we get struck by commit 0e2f733add ("dma-buf: make
dma_fence structure a bit smaller v2") as the cb_list is immediately
clobbered by the kfree_rcu.
v2: Avoid calling into timeline_fence_release() from under the spinlock
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111381
Fixes: d3862e44da ("dma-buf/sw-sync: Fix locking around sync_timeline lists")
References: 0e2f733add ("dma-buf: make dma_fence structure a bit smaller v2")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org> # v4.14+
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812154247.20508-1-chris@chris-wilson.co.uk
Increment the driver version to expose the new BO allocation flags.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-10-robh@kernel.org
The midgard/bifrost GPUs need to allocate GPU heap memory which is
allocated on GPU page faults and not pinned in memory. The vendor driver
calls this functionality GROW_ON_GPF.
This implementation assumes that BOs allocated with the
PANFROST_BO_NOEXEC flag are never mmapped or exported. Both of those may
actually work, but I'm unsure if there's some interaction there. It
would cause the whole object to be pinned in memory which would defeat
the point of this.
On faults, we map in 2MB at a time in order to utilize huge pages (if
enabled). Currently, once we've mapped pages in, they are only unmapped
if the BO is freed. Once we add shrinker support, we can unmap pages
with the shrinker.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-9-robh@kernel.org
In preparation to handle mapping of page faults, we need the MMU handler
to be threaded as code paths take a mutex.
As the IRQ may be shared, we can't use the default handler and must
disable the MMU interrupts locally.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-8-robh@kernel.org
Runtime PM resume and job timeouts both call the same sequence of
functions, so consolidate them to a common function. This will make
changing the reset related code easier. The MMU also needs some
re-initialization on reset, so rework its call. In the process, we
hide the address space details within the MMU code in preparation to
support multiple address spaces.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-7-robh@kernel.org
Executable buffers have an alignment restriction that they can't cross
16MB boundary as the GPU program counter is 24-bits. This restriction is
currently not handled and we just get lucky. As current userspace
assumes all BOs are executable, that has to remain the default. So add a
new PANFROST_BO_NOEXEC flag to allow userspace to indicate which BOs are
not executable.
There is also a restriction that executable buffers cannot start or end
on a 4GB boundary. This is mostly avoided as there is only 4GB of space
currently and the beginning is already blocked out for NULL ptr
detection. Add support to handle this restriction fully regardless of
the current constraints.
For existing userspace, all created BOs remain executable, but the GPU
VA alignment will be increased to the size of the BO. This shouldn't
matter as there is plenty of GPU VA space.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-6-robh@kernel.org
In preparation to create partial GPU mappings of BOs on page faults,
split out the SG list handling of panfrost_mmu_map().
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-5-robh@kernel.org
Setting the GPU VA when creating the GEM object doesn't allow for any
conditional adjustments to the mapping. In preparation to support
adjusting the mapping and per FD address spaces, restructure the GEM
object creation to map and unmap the GEM object in the GEM object .open()
and .close() hooks.
While panfrost_gem_free_object() and panfrost_gem_prime_import_sg_table()
are not really needed after this commit, keep them as we'll need them in
subsequent commits.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-4-robh@kernel.org
If a driver does its own management of pages, the shmem helper object's
pages array could be allocated when a SG table is not. There's not
really any good reason to tie putting pages with having a SG table when
freeing the object, so just put pages if the pages array is populated.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-3-robh@kernel.org
Panfrost has a need for pages allocated on demand via GPU page faults.
When releasing the pages, the only thing preventing using
drm_gem_put_pages() is needing to skip over unpopulated pages, so allow
for skipping over NULL struct page pointers.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-2-robh@kernel.org
I made the condition of the wait_event_timeout call in
gm12u320_fb_update_work a helper which takes a mutex to make sure
that any writes to fb_update.run or fb_update.fb from other CPU cores
are seen before the check is done.
This is not necessary as the wait_event helpers contain the necessary
barriers for this themselves.
More over it is harmfull since by the time the check is done the task
is no longer in the TASK_RUNNING state and calling mutex_lock while not
in task-running is not allowed, leading to this warning when the kernel
is build with some extra locking checks enabled:
[11947.450011] do not call blocking ops when !TASK_RUNNING; state=2 set at
[<00000000e4306de6>] prepare_to_wait_event+0x61/0x190
This commit fixes this by dropping the helper and simply directly
checking the condition (without unnecessary locking) in the
wait_event_timeout call.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811143725.5951-1-hdegoede@redhat.com
Previously the driver was using a mix of DRM_ERROR and dev_err, be
consisent and use DRM_DEV_ERROR everywhere instead.
Cc: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730133857.30778-2-hdegoede@redhat.com
3 small cleanups:
1) Drop unused DRIVER_PATCHLEVEL
2) We do not set mode_config.preferred_depth, so instead of passing the
unset mode_config.preferred_depth to drm_fbdev_generic_setup
simply pass 0
3) Use __maybe_unused instead of #ifdef CONFIG_PM around the suspend /
resume functions
Cc: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730133857.30778-1-hdegoede@redhat.com
This patch only brings the syncobj documentation up-to-date for the
original form of syncobj. It does not contain any information about the
design of timeline syncobjs.
v2: Incorporate feedback from Lionel and Christian:
- Mention actual ioctl and flag names
- Better language around reference counting
- Misc. language cleanups
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812142211.15885-1-jason@jlekstrand.net
Fixes the following warnings:
../drivers/gpu/drm/drm_connector.c:989: WARNING: Unexpected indentation.
../drivers/gpu/drm/drm_connector.c:993: WARNING: Unexpected indentation.
../include/drm/drm_connector.h:544: WARNING: Inline interpreted text or phrase reference start-string without end-string.
../include/drm/drm_connector.h:544: WARNING: Inline interpreted text or phrase reference start-string without end-string.
Changes in v2:
- Use () instead of & for functions (Sam)
Fixes: 1b27fbdde1 ("drm: Add drm_atomic_get_(old|new)_connector_for_encoder() helpers")
Fixes: bb5a45d40d ("drm/hdcp: update content protection property with uevent")
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812140112.6702-1-sean@poorly.run
Add suffix ULL to constant 1000 in order to avoid a potential integer
overflow and give the compiler complete information about the proper
arithmetic to use. Notice that this constant is being used in a context
that expects an expression of type u64, but it's currently evaluated
using 32-bit arithmetic.
Addresses-Coverity-ID: 1485796 ("Unintentional integer overflow")
Fixes: ed22c6d930 ("drm/komeda: Use drm_display_mode "crtc_" prefixed hardware timings")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812000801.GA29204@embeddedor
Same as for the individual fences, we want to report the actual status
of the fence when queried.
Reported-by: Petri Latvala <petri.latvala@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812091203.29871-1-chris@chris-wilson.co.uk
Orange Pi 3 board requires enabling a voltage shifting circuit via GPIO
for the DDC bus to be usable.
Add support for hdmi-connector node's optional ddc-en-gpios property to
support this use case.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806155744.10263-4-megous@megous.com
Some Allwinner SoC using boards (Orange Pi 3 for example) need to enable
on-board voltage shifting logic for the DDC bus using a gpio to be able
to access DDC bus. Use ddc-en-gpios property on the hdmi-connector to
model this.
Add binding documentation for optional ddc-en-gpios property.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806155744.10263-3-megous@megous.com
When one of the array of fences is signaled, propagate its errors to the
parent fence-array (keeping the first error to be raised).
v2: Opencode cmpxchg_local to avoid compiler freakout.
v3: Be careful not to flag an error if we race against signal-on-any.
v4: Same applies to installing the signal cb.
v5: Use cmpxchg to only set the error once before using a nifty idea by
Christian to avoid changing the status after emitting the signal.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811210902.22112-1-chris@chris-wilson.co.uk
There are no errors that can be reported by this function,
so drop the return code.
Fix the only bridge driver that checked the return result.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-14-sam@ravnborg.org
Inline comments provide better space for additional comments.
Comments was slightly edited to follow the normal style,
but no change to actual content.
Used the opportuniy to change the order in drm_panel_funcs
to follow the order they will be used by a panel.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-13-sam@ravnborg.org
Move inline functions from include/drm/drm_panel.h to drm_panel.c.
This is in preparation for follow-up patches that will add extra
logic to the functions.
As they are no longer static inline, EXPORT them.
v2:
- align order of functions in drm_panel.h and drm_panel.c (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-12-sam@ravnborg.org
To prepare the driver to receive drm_connector only in the get_modes()
callback, move bus_flags handling to ili9322_get_modes().
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-11-sam@ravnborg.org
Use drm_panel_get_modes() to access modes.
This has a nice side effect to simplify the code.
drm_panel_get_modes() may return a negative value if
for example panel is NULL. This is a small change
compared to before, but really what we want.
v2:
- Add more info to changelog (Stefan)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Alison Wang <alison.wang@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-6-sam@ravnborg.org
Use the drm_panel_get_modes() function to get the modes.
This patch leave one test for the function pointer:
panel->funcs->get_modes
This is used to check if the panel may have any modes.
There is no direct replacement.
We may be able to just check that drm_panel_get_modes() return > 0,
but as this is not the same functionality it is left for later.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-5-sam@ravnborg.org
Replace open coded version with call to drm_panel_get_modes().
Include change to deal with the possible negative
return values from drm_panel_get_modes()
v2:
- Added more info to changelog (Philipp)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-2-sam@ravnborg.org
Other cores don't busy wait any more and we removed the last user of checking
the seqno for changes. Drop updating the number for shared fences altogether.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/322379/?series=64837&rev=1
Add a new helper to get a consistent set of pointers from the reservation
object. While at it group all access helpers together in the header file.
v2: correctly return shared_count as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/322378/?series=64837&rev=1
We clear the callback list on kref_put so that by the time we
release the fence it is unused. No one should be adding to the cb_list
that they don't themselves hold a reference for.
This small change is actually making the structure 16% smaller.
v2: add the comment to the code as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/322916/
According to the register description of ENCI_MACV_MAX_AMP, the
macrovision max amplitude value should be:
- hdmi 480i => 0xb
- hdmi 576i => 0x7
The max value is 0x7ff (10 bits).
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/86mui782dt.fsf@baylibre.com
This patch add new macro HHI_HDMI_PLL_CNTL_EN which is used to enable
HDMI PLL.
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/86o92n82e1.fsf@baylibre.com
This patch aims to:
- Add general and TODO comments
- Respect coding style for multi-line comments
- Align macro definitions
- Remove useless macro
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/86pnn382e8.fsf@baylibre.com
This patch add new macros which are used to set the following
registers:
- ENCI_CFILT_CTRL
- ENCI_CFILT_CTRL2
- ENCI_MACV_MAX_AMP
- ENCI_VIDEO_MODE_ADV
- ENCI_VFIFO2VD_CTL
- ENCI_VIDEO_EN
- ENCP_VIDEO_MODE
- VPU_HDMI_SETTING
- VENC_UPSAMPLE_CTRL0
- VENC_UPSAMPLE_CTRL1
- VENC_UPSAMPLE_CTRL2
- VENC_VDAC_FIFO_CTRL
- VENC_VDAC_DAC0_FILT_CTRL0
- VENC_INTCTRL
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/86r27j82ef.fsf@baylibre.com
This patch add new macros which are used to set the following
registers:
- VIU_SW_RESET
- VIU_OSD1_CTRL_STAT
- VIU_OSD2_CTRL_STAT
- VIU_OSD1_FIFO_CTRL_STAT
- VIU_OSD2_FIFO_CTRL_STAT
- VIU_MISC_CTRL0
- VIU_OSD_BLEND_CTRL
- OSD1_BLEND_SRC_CTRL
- OSD2_BLEND_SRC_CTRL
- DOLBY_PATH_CTRL
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fix OSD1_BLEND_SRC_CTRL register init value for G12A]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/86sgrz82em.fsf@baylibre.com
This patch add new macros which are used to set the following
registers:
- VPP_OSD_SCALE_COEF_IDX
- VPP_DOLBY_CTRL
- VPP_OFIFO_SIZE
- VPP_HOLD_LINES
- VPP_SC_MISC
- VPP_VADJ_CTRL
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: put back 0x1020080 in VPP_DUMMY_DATA1 for GXM]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/86tvcf82eu.fsf@baylibre.com
This patch add new macro which is used to set WRARB/RDARB mode of
the VPU.
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/86v9wv82f1.fsf@baylibre.com
This patch add new macros which describe couple bits field of the
following registers:
- VD1_BLEND_SRC_CTRL
- VPP_SC_MISC
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/86wohb82fa.fsf@baylibre.com
The value used in the macro writel_bits_relaxed has to be masked since
we don't want change the bits outside the mask.
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/86y31r82fo.fsf@baylibre.com
This adds support for the TI nspire panels to the simple panel
roster. This code is based on arch/arm/mach-nspire/clcd.c.
This includes likely the first grayscale panel supported.
These panels will be used with the PL11x DRM driver.
Cc: Daniel Tang <dt.tangr@gmail.com>
Cc: Fabian Vogt <fabian@ritter-vogt.de>
Tested-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190805085847.25554-4-linus.walleij@linaro.org
Migrating the TI nspire calculators to use the PL111 driver for
framebuffer requires grayscale support for the elder panel
which uses 8bit grayscale only.
DRM does not support 8bit grayscale framebuffers in memory,
but by defining the bus format to be MEDIA_BUS_FMT_Y8_1X8 we
can get the hardware to turn on a grayscaling feature and
convert the RGB framebuffer to grayscale for us.
Cc: Daniel Tang <dt.tangr@gmail.com>
Cc: Fabian Vogt <fabian@ritter-vogt.de>
Tested-by: Fabian Vogt <fabian@ritter-vogt.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190805085847.25554-2-linus.walleij@linaro.org
Add support for madvise and a shrinker similar to other drivers. This
allows userspace to mark BOs which can be freed when there is memory
pressure.
Unlike other implementations, we don't depend on struct_mutex. The
driver maintains a list of BOs which can be freed when the shrinker
is called. Access to the list is serialized with the shrinker_lock.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190805143358.21245-2-robh@kernel.org
Add support to the shmem GEM helpers for tracking madvise state and
purging pages. This is based on the msm implementation.
The BO provides a list_head, but the list management is handled outside
of the shmem helpers as there are different locking requirements.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Acked-by: Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190805143358.21245-1-robh@kernel.org
