Instead of having a single 'input_dev' device that will take either pen
or touch data depending on the type of the device, create seperate devices
devices for each. By splitting things like this, we can support devices
(e.g. the I2C "AES" sensors in some newer tablet PCs) that send both pen
and touch reports from a single endpoint.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This splits the 'wacom_setup_pentouch_input_capabilites' function into
pieces dedicated to doing setup for just the pen interface and just
the touch interface. This makes it easier to focus on the relevant
piece when making changes.
This patch introduces no functional changes.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Historically, both the touch and pad tools would have shared the
'BTN_TOOL_FINGER' type. Any time you needed to distinguish the two, you
had to use some other bit of knowledge (e.g. that the pad was on the same
interface as the pen, and thus 'touch_max' would be zero).
To make these checks more readable, we introduce WACOM_DEVICETYPE_PAD.
Although we still have to rely on other bits of knowledge to set this
bit on the right interface (since it cannot be detected from the HID
descriptor), it can be done just once inside 'wacom_setup_device_quirks'.
This patch introduces no functional changes.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The USB devices that this driver has historically supported segregate the
pen and touch portions of the tablet. Oftentimes the segregation would be
done at the interface level, though on occasion (e.g. Cintiq 24HDT) the
tablet would combine two totally independent USB devices behind an internal
USB hub. Because pen and touch never shared the same interface, it made
sense for the 'device_type' to store a single value: "pen" or "touch".
Recently, however, some I2C devices have been created which combine the
two. A first step to accomodating this is to expand 'device_type' so that
it can represent two (or potentially more) types simultaneously. To do
this, we treat it as a bitfield and set/check individual bits rather
than using the '=' and '==' operators.
This should not result in any functional change since no supported devices
(that I'm aware of, at least) have HID descriptors that indicate both
pen and touch reports on a single interface.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A little bit of cleanup work for 'wacom_update_name' to make it easier on
the eyes. Creates a temporary 'name' variable on which we'll perform our
edits. Once the name is in its final form, it will be copied (with
appropriate suffix) to 'wacom_wac->name' and 'wacom_wac->pad_name'.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Hardware may not respond to a request for the HID_DG_CONTACTMAX feature and
we should be tolerant of such a failure. This is especially true when using
hid-replay where the hardware doesn't exist, but also for devices attached
to a flaky bus. This patch increases the number of allowable retries to
match other calls to 'wacom_get_report' and also provides a fallback which
forces 'touch_max = 16' (enough for any Wacom device seen so far).
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Retrying on -EPIPE makes very little sense since this typically indicates
a problem that will not just disappear on its own. For instance, the USB
documentation states that it will be sent if the endpoint is stalled or
the device has disconnected. Instead, we should retry if -EAGAIN is
received since this indicates a temporary error condition such as a busy
bus.
In addition to adjusting the conditions we retry under, we also log an
error on failure so that we can be aware of what's going on.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The last patch was careful to maintain backwards-compatible behavior
by forcing device_type to BTN_TOOL_PEN (and printing a warning) if it
were still uninitialized after scanning the HID descriptor and applying
quirks. We should be more strict with HID_GENERIC devices, however,
since there is no a priori guarantee that it is a tablet or touchpad.
If the device_type is still uninitialized for a HID_GENERIC device then
we assume that it isn't something the driver can work with and so fail
the probe.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently, we assume a device_type of BTN_TOOL_PEN before scanning the
HID descriptor and then change the device_type if what we discover
proves that assumption wrong. This way of doing things makes it more
difficult to figure out if a device (particularly a HID_GENERIC device)
actually does tablet/touch input or is something completley different.
This patch leaves device_type at its initial value of 0 and then calls
'wacom_parse_hid' for every device (not just those that have touch).
As we map the usages, we can set the device_type as before. After we're
finished, we can then check if the value is still zero and do whatever
is most appropriate.
Detecting the pen can be a little tricky on most Wacom devices because
the descriptors describe opaque blobs. Fortunately, older Wacom tablets
have the HID_DG_DIGITIZER usage on the pen's application collection and
newer tablets seem to have a similar vendor-defined usage that we can
trigger on.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The naming logic currently assumes that all devices will be a pen, finger,
or pad. Though this has historically been the case, the new HID_GENERIC
catch-all may cause us to probe devices with Wacom's 056A VID which aren't
any of these types (e.g. the "Cintiq 24HDT Monitor Control"). This patch
updates the logic so that no suffix will be added to the device name if
the device type is unknown.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID generic devices share the same default name, "Wacom HID". This
causes userland programs to show same device names for different
devices, which would confuse end users with same device names for
different devices too.
This patch uses name retrieved from HID descriptor, if a meaningful
name is reported. Otherwise, affix its product ID to "Wacom HID".
Names from descriptor may contain extra whitespaces. To comfort
readers' eyes, we removed those extra whitespaces too.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
To determine if a touch is present in the single-touch case, we can
simply check if the BTN_TOUCH key is active or not. This will work for
both HID_GENERIC and other device types.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We use generic hid_report_len() to get individual packet length now.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
That is where they belong...
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It makes probe routine easy to follow.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
- quite a few firmware fixes for RMI driver by Andrew Duggan
- huion and uclogic drivers have been substantially overlaping in
functionality laterly. This redundancy is fixed by hid-huion driver
being merged into hid-uclogic; work done by Benjamin Tissoires and
Nikolai Kondrashov
- i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg
- Some of the quirks, that got separated into individual drivers, have
historically had EXPERT dependency. As HID subsystem matured (as
well as the individual drivers), this made less and less sense. This
dependency is now being removed by patch from Jean Delvare
- Logitech lg4ff driver received a couple of improvements for mode
switching, by Michal Malý
- multitouch driver now supports clickpads, patches by Benjamin
Tissoires and Seth Forshee
- hid-sensor framework received a substantial update; namely support
for Custom and Generic pages is being added; work done by Srinivas
Pandruvada
- wacom driver received substantial update; it now supports
i2c-conntected devices (Mika Westerberg), Bamboo PADs are now
properly supported (Benjamin Tissoires), much improved battery
reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng)
- small assorted fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits)
HID: sensor: Update document for custom sensor
HID: sensor: Custom and Generic sensor support
HID: debug: fix error handling in hid_debug_events_read()
Input - mt: Fix input_mt_get_slot_by_key
HID: logitech-hidpp: fix error return code
HID: wacom: Add support for Cintiq 13HD Touch
HID: logitech-hidpp: add a module parameter to keep firmware gestures
HID: usbhid: yet another mouse with ALWAYS_POLL
HID: usbhid: more mice with ALWAYS_POLL
HID: wacom: set stylus_in_proximity before checking touch_down
HID: wacom: use wacom_wac_finger_count_touches to set touch_down
HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT
HID: pidff: effect can't be NULL
HID: add quirk for PIXART OEM mouse used by HP
HID: add HP OEM mouse to quirk ALWAYS_POLL
HID: wacom: ask for a in-prox report when it was missed
HID: hid-sensor-hub: Fix sparse warning
HID: hid-sensor-hub: fix attribute read for logical usage id
HID: plantronics: fix Kconfig default
HID: pidff: support more than one concurrent effect
...
Here's the big staging driver patchset for 4.1-rc1.
There's a lot of patches here, the Outreachy application period happened
during this development cycle, so that means that there was a lot of
cleanup patches accepted. Other than the normal coding style and sparse
fixes here, there are some driver updates and work toward making some of
the drivers into "mergable" shape (like the Unisys drivers.)
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlUsIA0ACgkQMUfUDdst+ylHuACgm8QZ9S6lk45/Qd9YeR3NSDaS
upoAn3gVAaHnuxkW3anivuwOcirgCp3l
=7VHU
-----END PGP SIGNATURE-----
Merge tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the big staging driver patchset for 4.1-rc1.
There's a lot of patches here, the Outreachy application period
happened during this development cycle, so that means that there was a
lot of cleanup patches accepted. Other than the normal coding style
and sparse fixes here, there are some driver updates and work toward
making some of the drivers into "mergable" shape (like the Unisys
drivers.)
All of these have been in linux-next for a while"
* tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1214 commits)
staging: lustre: orthography & coding style
staging: lustre: lnet: lnet: fix error return code
staging: lustre: fix sparse warning
Revert "Staging: sm750fb: Fix C99 Comments"
Staging: rtl8192u: use correct array for debug output
staging: rtl8192e: Remove dead code
staging: rtl8192e: Comment cleanup (style/format)
staging: rtl8192e: Fix indentation in rtllib_rx_auth_resp()
staging: rtl8192e: Decrease nesting of rtllib_rx_auth_resp()
staging: rtl8192e: Divide rtllib_rx_auth()
staging: rtl8192e: Fix PRINTK_WITHOUT_KERN_LEVEL warnings
staging: rtl8192e: Fix DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON warning
staging: rtl8192e: Fix BRACES warning
staging: rtl8192e: Fix LINE_CONTINUATIONS warning
staging: rtl8192e: Fix UNNECESSARY_PARENTHESES warnings
staging: rtl8192e: remove unused EXPORT_SYMBOL_RSL macro
staging: rtl8192e: Fix RETURN_VOID warnings
staging: rtl8192e: Fix UNNECESSARY_ELSE warning
staging: rtl8723au: Remove unneeded comments
staging: rtl8723au: Use __func__ in trace logs
...
Here's the driver-core / kobject / lz4 tree update for 4.1-rc1.
Everything here has been in linux-next for a while with no reported
issues. It's mostly just coding style cleanups, with other minor
changes in here as well, nothing big.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlUsHkwACgkQMUfUDdst+ykT2gCfbYRyqG+p+jPJnaintZABv04D
atMAn0TFWeyRzlYu/eHpKVnrASUYKxA9
=GwEv
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the driver-core / kobject / lz4 tree update for 4.1-rc1.
Everything here has been in linux-next for a while with no reported
issues. It's mostly just coding style cleanups, with other minor
changes in here as well, nothing big"
* tag 'driver-core-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
debugfs: allow bad parent pointers to be passed in
stable_kernel_rules: Add clause about specification of kernel versions to patch.
kobject: WARN as tip when call kobject_get() to a kobject not initialized
lib/lz4: Pull out constant tables
drivers: platform: parse IRQ flags from resources
driver core: Make probe deferral more quiet
drivers/core/of: Add symlink to device-tree from devices with an OF node
device: Add dev_of_node() accessor
drivers: base: fw: fix ret value when loading fw
firmware: Avoid manual device_create_file() calls
drivers/base: cacheinfo: validate device node for all the caches
drivers/base: use tabs where possible in code indentation
driver core: add missing blank line after declaration
drivers: base: node: Delete space after pointer declaration
drivers: base: memory: Use tabs instead of spaces
firmware_class: Fix whitespace and indentation
drivers: base: dma-mapping: Erase blank space after pointer
drivers: base: class: Add a blank line after declarations
attribute_container: fix missing blank lines after declarations
drivers: base: memory: Fix switch indent
...
Here's the big USB (and PHY) driver patchset for 4.1-rc1.
Everything here has been in linux-next, and the full details are below
in the shortlog. Nothing major, just the normal round of new
drivers,api updates, and other changes, mostly in the USB gadget area,
as usual.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlUsHXYACgkQMUfUDdst+ykGvwCfbI3z0VYJqyvPi7pbn+jtGouQ
E7MAoICdP90ofZfyzQzXy+2xKTTCiP5L
=jSjh
-----END PGP SIGNATURE-----
Merge tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver updates from Greg KH:
"Here's the big USB (and PHY) driver patchset for 4.1-rc1.
Everything here has been in linux-next, and the full details are below
in the shortlog. Nothing major, just the normal round of new
drivers,api updates, and other changes, mostly in the USB gadget area,
as usual"
* tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (252 commits)
drivers/usb/core: devio.c: Removed an uneeded space before tab
usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resume
usb: chipidea: debug: add low power mode check before print registers
usb: chipidea: udc: bypass pullup DP when gadget connect in OTG fsm mode
usb: core: hub: use new USB_RESUME_TIMEOUT
usb: isp1760: hcd: use new USB_RESUME_TIMEOUT
usb: dwc2: hcd: use new USB_RESUME_TIMEOUT
usb: host: sl811: use new USB_RESUME_TIMEOUT
usb: host: r8a66597: use new USB_RESUME_TIMEOUT
usb: host: oxu210hp: use new USB_RESUME_TIMEOUT
usb: host: fusbh200: use new USB_RESUME_TIMEOUT
usb: host: fotg210: use new USB_RESUME_TIMEOUT
usb: host: isp116x: use new USB_RESUME_TIMEOUT
usb: musb: use new USB_RESUME_TIMEOUT
usb: host: uhci: use new USB_RESUME_TIMEOUT
usb: host: ehci: use new USB_RESUME_TIMEOUT
usb: host: xhci: use new USB_RESUME_TIMEOUT
usb: define a generic USB_RESUME_TIMEOUT macro
usb: musb: dsps: fix build on i386 when COMPILE_TEST is set
ehci-hub: use USB_DT_HUB
...
Pull cgroup updates from Tejun Heo:
"Nothing too interesting. Rik made cpuset cooperate better with
isolcpus and there are several other cleanup patches"
* 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset, isolcpus: document relationship between cpusets & isolcpus
cpusets, isolcpus: exclude isolcpus from load balancing in cpusets
sched, isolcpu: make cpu_isolated_map visible outside scheduler
cpuset: initialize cpuset a bit early
cgroup: Use kvfree in pidlist_free()
cgroup: call cgroup_subsys->bind on cgroup subsys initialization
Pull libata updates from Tejun Heo:
- Hannes's patchset implements support for better error reporting
introduced by the new ATA command spec.
- the deperecated pci_ dma API usages have been replaced by dma_ ones.
- a bunch of hardware specific updates and some cleanups.
* 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ata: remove deprecated use of pci api
ahci: st: st_configure_oob must be called after IP is clocked.
ahci: st: Update the ahci_st DT documentation
ahci: st: Update the DT example for how to obtain the PHY.
sata_dwc_460ex: indent an if statement
libata: Add tracepoints
libata-eh: Set 'information' field for autosense
libata: Implement support for sense data reporting
libata: Implement NCQ autosense
libata: use status bit definitions in ata_dump_status()
ide,ata: Rename ATA_IDX to ATA_SENSE
libata: whitespace fixes in ata_to_sense_error()
libata: whitespace cleanup in ata_get_cmd_descript()
libata: use READ_LOG_DMA_EXT
libata: remove ATA_FLAG_LOWTAG
sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev
sata_dwc_460ex: move to generic DMA driver
sata_dwc_460ex: join messages back
sata: xgene: add ACPI support for APM X-Gene SATA ports
ata: sata_mv: add proper definitions for LP_PHY_CTL register values
Pull workqueue updates from Tejun Heo:
"Workqueue now prints debug information at the end of sysrq-t which
should be helpful when tracking down suspected workqueue stalls. It
only prints out the ones with something currently going on so it
shouldn't add much output in most cases"
* 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Reorder sysfs code
percpu: Fix trivial typos in comments
workqueue: dump workqueues on sysrq-t
workqueue: keep track of the flushing task and pool manager
workqueue: make the workqueues list RCU walkable
Pull irq core updates from Thomas Gleixner:
"Managerial summary:
Core code:
- final removal of IRQF_DISABLED
- new state save/restore functions for virtualization support
- wakeup support for stacked irqdomains
- new function to solve the netpoll synchronization problem
irqchips:
- new driver for STi based devices
- new driver for Vybrid MSCM
- massive cleanup of the GIC driver by moving the GIC-addons to
stacked irqdomains
- the usual pile of fixes and updates to the various chip drivers"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
irqchip: GICv3: Add support for irq_[get, set]_irqchip_state()
irqchip: GIC: Add support for irq_[get, set]_irqchip_state()
genirq: Allow the irqchip state of an IRQ to be save/restored
genirq: MSI: Fix freeing of unallocated MSI
irqchip: renesas-irqc: Add wake-up support
irqchip: armada-370-xp: Allow using wakeup source
irqchip: mips-gic: Add new functions to start/stop the GIC counter
irqchip: tegra: Add Tegra210 support
irqchip: digicolor: Move digicolor_set_gc to init section
irqchip: renesas-irqc: Add functional clock to bindings
irqchip: renesas-irqc: Add minimal runtime PM support
irqchip: renesas-irqc: Add more register documentation
DT: exynos: update PMU binding
ARM: exynos4/5: convert pmu wakeup to stacked domains
irqchip: gic: Don't complain in gic_get_cpumask() if UP system
ARM: zynq: switch from gic_arch_extn to gic_set_irqchip_flags
ARM: ux500: switch from gic_arch_extn to gic_set_irqchip_flags
ARM: shmobile: remove use of gic_arch_extn.irq_set_wake
irqchip: gic: Add an entry point to set up irqchip flags
ARM: omap: convert wakeupgen to stacked domains
...
* new API for safe access of power supply function attrs
* devres support for power supply (un)registration
* new drivers / chips
- generic syscon based poweroff driver
- iio & charger driver for da9150
- fuel gauge driver for axp288
- bq27x00: add support for bq27510
- bq2415x: add support for bq24157s
* twl4030-madc-battery: convert to iio consumer
* misc fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WbZu
-----END PGP SIGNATURE-----
Merge tag 'for-v4.1' of git://git.infradead.org/battery-2.6
Pull power supply and reset changes from Sebastian Reichel:
- new API for safe access of power supply function attrs
- devres support for power supply (un)registration
- new drivers / chips:
- generic syscon based poweroff driver
- iio & charger driver for da9150
- fuel gauge driver for axp288
- bq27x00: add support for bq27510
- bq2415x: add support for bq24157s
- twl4030-madc-battery: convert to iio consumer
- misc fixes
* tag 'for-v4.1' of git://git.infradead.org/battery-2.6: (66 commits)
power: twl4030_madc_battery: Add missing MODULE_ALIAS
power: twl4030-madc-battery: Convert to iio consumer.
dt: power: Add docs for generic SYSCON poweroff driver.
power: reset: Add generic SYSCON register mapped poweroff.
power: max17042_battery: add missed blank
power: max17042_battery: Use reg type instead of chip type
power/reset: at91: big endian fixes for atsama5d3x
power_supply: charger-manager: Fix dereferencing of ERR_PTR
HID: input: Fix NULL pointer dereference when power_supply_register fails
power: constify of_device_id array
power/reset/rmobile-reset.c: Fix !HAS_IOMEM build
power_supply: 88pm860x_charger: Fix possible NULL pointer dereference and use of initialized variable
arm: mach-pxa: Decrement the power supply's device reference counter
mfd: ab8500: Decrement the power supply's device reference counter
power_supply: bq2415x_charger: Decrement the power supply's device reference counter
power_supply: 88pm860x_charger: Decrement the power supply's device reference counter
x86/olpc/xo15/sci: Use newly added power_supply_put API
x86/olpc/xo1/sci: Use newly added power_supply_put API
power_supply: charger-manager: Decrement the power supply's device reference counter
power_supply: Increment power supply use counter when obtaining references
...
Another release, another set of regulator updates. Not much of it is
showing up in the code yet but there's been a lot of discussion going on
about how to enhance the regulator API to work better with modern SoCs
which have a microcontroller sitting between Linux and the hardware.
I'm hopeful that'll start to come through into mainline for v4.2 but
it's not quite there for v4.1 - what we do have (along with the usual
small updates is) is:
- Work from Bjorn Andersson on refactoring the configuration of
regulator loading interfaces to be useful for use with
microcontrollers, the existing interfaces were never actually useful
for anything as-is since nobody was willing to put enough data into
public code.
- A summary tree display in debugfs from Heiko Stübner.
- Support for act6000 regulators.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVK+w1AAoJECTWi3JdVIfQeg0H/2ckXZEQWH/yzAz7JgAoSmVr
+y8pvfNLOyOVVulFI0QBOaCAoyJNXNPNqDrkYaTykMIwX4y+weoDqfH/LMiGpnXl
D3aAgdLPSWLTUMteCs9KIHesnOdjKclZUjnbskJgnmeMCW23WcX9T1lBVoLBVdlo
p+oe287rhEwF6j2t63aLwFv8QGpamgVQ/8mXXs8EK7L5E3OO262SwLaXRBAtWk30
Eb68qXrbbkrDunEL6Hjggj5pFi93M4eNfQHpzVmjidvwz1g4JpLtWHW4XpQlXoHJ
G2rlVwNFsyedT1MX2ByKhrIPu5kq5pt0/rjear34G3vuEnQm7vR3aW/38AOxffs=
=t8gT
-----END PGP SIGNATURE-----
Merge tag 'regulator-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Another release, another set of regulator updates. Not much of it is
showing up in the code yet but there's been a lot of discussion going
on about how to enhance the regulator API to work better with modern
SoCs which have a microcontroller sitting between Linux and the
hardware.
I'm hopeful that'll start to come through into mainline for v4.2 but
it's not quite there for v4.1 - what we do have (along with the usual
small updates is) is:
- work from Bjorn Andersson on refactoring the configuration of
regulator loading interfaces to be useful for use with
microcontrollers, the existing interfaces were never actually
useful for anything as-is since nobody was willing to put enough
data into public code.
- a summary tree display in debugfs from Heiko Stübner.
- support for act6000 regulators"
* tag 'regulator-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits)
regulator: max8660: Handle empty regulator data
regulator: output current-limit for all regulators in summary
regulator: add a summary tree in debugfs
regulator: qcom: Tidy up probe()
regulator: qcom: Rework to single platform device
regulator: qcom: Refactor of-parsing code
regulator: qcom: Don't enable DRMS in driver
regulator: max8660: fix assignment of pdata to data that becomes dead
regulator: Defer lookup of supply to regulator_get
mfd: max77693: Remove unused structures
regulator: max77693: Let core parse DT and drop board files support
regulator: Ensure unique regulator debugfs directory names
regulator: stw481x: Remove unused fields from struct stw481x
regulator: palmas: Add has_regen3 check for TPS659038
regulator: constify of_device_id array
regulator: fixes for regulator_set_optimum_mode name change
regulator: Drop temporary regulator_set_optimum_mode wrapper
usb: phy: phy-msm-usb: Rename regulator_set_optimum_mode
usb: phy: ab8500-usb: Rename regulator_set_optimum_mode
ufs: Rename of regulator_set_optimum_mode
...
Only one framework update this time around, a change from Lars-Peter to
move full to pm_ops and remove the legacy bus PM ops. Otherwise it's
all driver updates:
- Make the spidev driver complain loudly if registered as spidev with
DT rather than with a compatible string, hopefully helping people
avoid making that mistake.
- Error handling and robustness fixes for the Designware and Intel MID
drivers from Andy Shevchenko.
- Substantial performance improvements for the Raspberry Pi driver from
Martin Sperl.
- Several new features for spidev_test from Adrian Remonda and Ian
Abbott.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVK8JoAAoJECTWi3JdVIfQEl0H/iQU06k/sFtfQYwsj/LJHKTe
L3SOfBoEuS3l9UudCpVspGwikcrbdTtziO/VY0oCPMdjovHrXFsaoT902LGeDsTn
oSnxXojSQOpet7at2tEYk7O/tdyykKR6fU2t4GJBYRreBvvQCG8xsrrAk/ahHTsn
LC4x49zwgvm4R24VPA37AhdDvBUxFWuJC3uQhf9cc59/DqPKaC5cm2L6mA6m5Vwk
W7t6kodr8wURp+Yc+VAvR3u4tRkCJUmgSO54ysGNuToR5brRTyEnBCed2GcqoDjQ
OFQDgHuEP/YPQOojxGJ+RMW5VpKXmaXYotvUhTdLRSevVmVNQfa4zUPtTnb13kA=
=+TxD
-----END PGP SIGNATURE-----
Merge tag 'spi-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"Only one framework update this time around, a change from Lars-Peter
to move full to pm_ops and remove the legacy bus PM ops. Otherwise
it's all driver updates:
- make the spidev driver complain loudly if registered as spidev with
DT rather than with a compatible string, hopefully helping people
avoid making that mistake.
- error handling and robustness fixes for the Designware and Intel
MID drivers from Andy Shevchenko.
- substantial performance improvements for the Raspberry Pi driver
from Martin Sperl.
- several new features for spidev_test from Adrian Remonda and Ian
Abbott"
* tag 'spi-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (75 commits)
spi: bcm2835: enabling polling mode for transfers shorter than 30us
spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
spi: img-spfi: Control CS lines with GPIO
spi: img-spfi: Reset controller after each message
spi: img-spfi: Implement a handle_err() callback
spi: img-spfi: Setup TRANSACTION register before CONTROL register
spi: Make master->handle_err() callback optional to avoid crashes
spi: img-spfi: Limit bit clock to 1/4th of input clock
spi: img-spfi: Implement a prepare_message() callback
spi: fsl-dspi: Add ~50ns delay between cs and sck
spi: fsl-dspi: Add cs-sck delays
spi: fsl-dspi: Fix clock rate scale values
spi: signedness bug in qspi_trigger_transfer_out_int()
spi: imx: read back the RX/TX watermark levels earlier
spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers()
spi: bitbang: only toggle bitchanges
spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div()
spi: fsl-dspi: Fix clock rate scale values
spi: Using Trigger number to transmit/receive data
spi: bcm2835: fill FIFO before enabling interrupts to reduce interrupts/message
...
Just one patch for regmap this time around, a change from Steven Rostedt
to prettify the way we're making the regmap internal header available to
the trace events (it turns out that the trace subsystem doesn't actually
need to be in trace/events).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVK6+IAAoJECTWi3JdVIfQ+LoH/jIF6jq8oFna+T7uBa0cMw3p
vLm8N+j4ONLTVuEX0pd4+n13st2P4Epj6fVKJHFCPED/omdBMNWpGTn0ewX7AKCx
7jgjURmhv/WXWfLUzmlBHtM3Z4A/G2gEU1JFXFvCkbzsJwiqxjhElGuUoI+NWxyP
pW0nOABgPbIfhd0/MKvtNiBd63EXNEQilDrBPepp8UlhBR2DXQL9xdNBB4kbMMSk
5gjDmTIig16ORODvxgb9kK1DCaRQ265p3sa0O0fNJxfjpLmmXqBX3PXWNeCmOD4D
OMWh0QbhipdUO+VKMBRaWYxnIfAJnY9z408W9LgjhHcBLDsfiI+RPhCHG9+qatE=
=TkKs
-----END PGP SIGNATURE-----
Merge tag 'regmap-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap update from Mark Brown:
"Just one patch for regmap this time around, a change from Steven
Rostedt to prettify the way we're making the regmap internal header
available to the trace events (it turns out that the trace subsystem
doesn't actually need to be in trace/events)"
* tag 'regmap-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Move tracing header into drivers/base/regmap
- Add support for marking HPI as broken through devicetree
- Enable runtime PM management of host devices
- Remove the ->enable|disable() callbacks
- Restructure code and cleanups
- Refreshed some of the MMC sections in MAINTAINERS
MMC host:
- dw_mmc: HS400 mode support
- dw_mmc: Add the cmd11 timer to detect a timeout
- dw_mmc: Endian agnostic IO accessors
- dw_mmc: Bugfixes
- sh_mmcif: Add exclusion between cmd and interrupt
- omap_hsmmc: Hibernation support
- omap_hsmmc: Rework and simplify cover/card detect
- omap_hsmmc: Stop using ->enable|disable() callbacks
- atmel-mci: Endian agnostic IO
- sunxi: Enable MMC_CAP_SDIO_IRQ
- sdhci-st: Add support for the stih407 family silicon
- sdhci-st: UHS card support in SDR104 mode
- sdhci-st: HS200 mode support
- sdhci-esdhc-imx: Use common mmc DT parser
- sdhci-of-arasan: Use common mmc DT parser
- sdhci-iproc: Add new driver for Broadcom IPROC SDHCI controller
- sdhci-tegra: Convert to GPIO descriptors
- sdhci-tegra: Optmize write_w path for tegra114 and later
- sdhci-sirf: Update tuning procedure
- sdhci: Fix card presence logic
- sdhci: Cleanups and consolidation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mKlf
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.1' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for marking HPI as broken through devicetree
- Enable runtime PM management of host devices
- Remove the ->enable|disable() callbacks
- Restructure code and cleanups
- Refreshed some of the MMC sections in MAINTAINERS
MMC host:
- dw_mmc: HS400 mode support
- dw_mmc: Add the cmd11 timer to detect a timeout
- dw_mmc: Endian agnostic IO accessors
- dw_mmc: Bugfixes
- sh_mmcif: Add exclusion between cmd and interrupt
- omap_hsmmc: Hibernation support
- omap_hsmmc: Rework and simplify cover/card detect
- omap_hsmmc: Stop using ->enable|disable() callbacks
- atmel-mci: Endian agnostic IO
- sunxi: Enable MMC_CAP_SDIO_IRQ
- sdhci-st: Add support for the stih407 family silicon
- sdhci-st: UHS card support in SDR104 mode
- sdhci-st: HS200 mode support
- sdhci-esdhc-imx: Use common mmc DT parser
- sdhci-of-arasan: Use common mmc DT parser
- sdhci-iproc: Add new driver for Broadcom IPROC SDHCI controller
- sdhci-tegra: Convert to GPIO descriptors
- sdhci-tegra: Optmize write_w path for tegra114 and later
- sdhci-sirf: Update tuning procedure
- sdhci: Fix card presence logic
- sdhci: Cleanups and consolidation"
* tag 'mmc-v4.1' of git://git.linaro.org/people/ulf.hansson/mmc: (79 commits)
mmc: sdhci-st: Update ST SDHCI binding documentation.
mmc: sdhci-st: Update the quirks for this controller.
mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function.
mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue registers.
mmc: sdhci-st: Add delay management functions for top registers (eMMC).
mmc: sdhci-st: Add support for de-asserting reset signal and top regs resource
mmc: sdhci-st: Add macros for register offsets and bitfields for mmcss glue regs
mmc: sdhci-esdhc-imx: Call mmc_of_parse()
mmc: dw_mmc: Add locking around cmd11 timer
mmc: dw_mmc: Add a return in an unexpected cmd11 timeout
mmc: dw_mmc: Increase cmd11 timeout to 500ms
mmc: dw_mmc: fix fifo ordering in big endian
mmc: dw_mmc: change idmac descriptor files to __le32
mmc: dw_mmc: make IO accessors endian agnostic
mmc: core: Convert the error field in struct mmc_command|data into an int
mmc: sdhci-of-arasan: Call OF parsing for MMC
mmc: sdhci-pci: fix 64 BIT DMA quirks for rtsx
mmc: Add support for marking hpi as broken through devicetree
mmc: sdhci-tegra: convert to use GPIO descriptors
mmc: omap_hsmmc: use generic slot-gpio isr to manage card detect pin
...
* misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=h2wl
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
- convert a bunch of drivers to static attribute groups (Takashi Iwai)
- misc cleanups
* tag 'edac_for_4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC: Constify of_device_id array
EDAC, i82443bxgx: Don't export static symbol
EDAC, amd64_edac: Get rid of per-node driver instances
EDAC: Properly unwind on failure path in edac_init()
EDAC: highbank: Use static attribute groups for sysfs entries
EDAC: octeon: Use static attribute groups for sysfs entries
EDAC: mpc85xx: Use static attribute groups for sysfs entries
EDAC: i7core: Use static attribute groups for sysfs entries
EDAC: i7core: Return proper error codes for kzalloc() errors
EDAC: amd64: Use static attribute groups
EDAC: Allow to pass driver-specific attribute groups
EDAC: Use static attribute groups for managing sysfs entries
EDAC: Delete unnecessary checks before pci_dev_put()
- Add support for IT8620E, IT8781F, IT8786E, and IT8790E to it87 driver
- Add driver for NCT7904
- Functional improvements
- Support for new devicetree structure in ibmpowernv driver
- Register pwm-fan and gpio-fan drivers as thermal cooling devices
- Various minor cleanup and improvements to it87, nct6775, jc42,
ibmpex, and coretemp drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RD/q
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Support for new chips:
- add support for IT8620E, IT8781F, IT8786E, and IT8790E to it87
driver
- add driver for NCT7904
Functional improvements:
- support for new devicetree structure in ibmpowernv driver
- register pwm-fan and gpio-fan drivers as thermal cooling devices
- various minor cleanup and improvements to it87, nct6775, jc42,
ibmpex, and coretemp drivers"
* tag 'hwmon-for-linus-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (43 commits)
hwmon: (pwm-fan) Update the duty cycle inorder to control the pwm-fan
hwmon: (it87) Use feature macros on sio_data
hwmon: (ibmpowernv) Fix build error seen for some configurations
hwmon: (gpio-fan) Move the thermal registration after registration is complete
hwmon: (ibmpowernv) pretty print labels
hwmon: (ibmpowernv) add a label attribute
hwmon: (ibmpowernv) add support for the new device tree
hwmon: (ibmpowernv) add a helper routine create_hwmon_attr
hwmon: (it87) Add support for 6th fan of IT8620E
hwmon: (it87) Add support for IT8620E
hwmon: (it87) Add support for IT8790E
hwmon: (it87) Introduce feature flag to reflect internal in7 sensor
hwmon: (it87) Introduce configuration field for chip suffix
hwmon: (it87) Fix PWM frequency display for chips with newer PWM control
hwmon: (it87) Fix pwm sysfs attribute removal
hwmon: (ibmpowernv) do not use the OPAL index for hwmon attribute names
hwmon: (ibmpowernv) change create_hwmon_attr_name() prototype
hwmon: (ibmpowernv) add a convert_opal_attr_name() routine
hwmon: (ibmpowernv) add a get_sensor_type() routine
hwmon: (ibmpowernv) replace AMBIENT_TEMP by TEMP
...
Pull x86 vdso changes from Ingo Molnar:
"Misc vDSO updates"
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Remove x32 intermediates during 'make clean'
x86/vdso: Teach 'make clean' to remove generated vdso-image-*.c files
x86/vdso32/syscall.S: Do not load __USER32_DS to %ss
x86/vdso: Fix the x86 vdso2c tool includes
Pull x86 fix from Ingo Molnar:
"Leftover from 4.0
Fix a local stack variable corruption with certain kdump usage
patterns (Dave Young)"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/numa: Fix kernel stack corruption in numa_init()->numa_clear_kernel_node_hotplug()
Pull x86 RAS changes from Ingo Molnar:
"The main changes in this cycle were:
- Simplify the CMCI storm logic on Intel CPUs after yet another
report about a race in the code (Borislav Petkov)
- Enable the MCE threshold irq on AMD CPUs by default (Aravind
Gopalakrishnan)
- Add AMD-specific MCE-severity grading function. Further error
recovery actions will be based on its output (Aravind Gopalakrishnan)
- Documentation updates (Borislav Petkov)
- ... assorted fixes and cleanups"
* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/severity: Fix warning about indented braces
x86/mce: Define mce_severity function pointer
x86/mce: Add an AMD severities-grading function
x86/mce: Reindent __mcheck_cpu_apply_quirks() properly
x86/mce: Use safe MSR accesses for AMD quirk
x86/MCE/AMD: Enable thresholding interrupts by default if supported
x86/MCE: Make mce_panic() fatal machine check msg in the same pattern
x86/MCE/intel: Cleanup CMCI storm logic
Documentation/acpi/einj: Correct and streamline text
x86/MCE/AMD: Drop bogus const modifier from AMD's bank4_names()
Pull x86 platform change from Ingo Molnar:
"An Intel Quark SoC fix"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel/quark: Run IMR self-test on IMR capble hw only
Pull x86 mm changes from Ingo Molnar:
"The main changes in this cycle were:
- reduce the x86/32 PAE per task PGD allocation overhead from 4K to
0.032k (Fenghua Yu)
- early_ioremap/memunmap() usage cleanups (Juergen Gross)
- gbpages support cleanups (Luis R Rodriguez)
- improve AMD Bulldozer (family 0x15) ASLR I$ aliasing workaround to
increase randomization by 3 bits (per bootup) (Hector
Marco-Gisbert)
- misc fixlets"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Improve AMD Bulldozer ASLR workaround
x86/mm/pat: Initialize __cachemode2pte_tbl[] and __pte2cachemode_tbl[] in a bit more readable fashion
init.h: Clean up the __setup()/early_param() macros
x86/mm: Simplify probe_page_size_mask()
x86/mm: Further simplify 1 GB kernel linear mappings handling
x86/mm: Use early_param_on_off() for direct_gbpages
init.h: Add early_param_on_off()
x86/mm: Simplify enabling direct_gbpages
x86/mm: Use IS_ENABLED() for direct_gbpages
x86/mm: Unexport set_memory_ro() and set_memory_rw()
x86/mm, efi: Use early_ioremap() in arch/x86/platform/efi/efi-bgrt.c
x86/mm: Use early_memunmap() instead of early_iounmap()
x86/mm/pat: Ensure different messages in STRICT_DEVMEM and PAT cases
x86/mm: Reduce PAE-mode per task pgd allocation overhead from 4K to 32 bytes
Pull x86 microcode changes from Ingo Molnar:
"Microcode driver updates: mostly cleanups but also some fixes
(Borislav Petkov)"
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/amd: Drop the pci_ids.h dependency
x86/microcode/intel: Fix printing of microcode blobs in show_saved_mc()
x86/microcode/intel: Check scan_microcode()'s retval
x86/microcode/intel: Sanitize microcode_pointer()
x86/microcode/intel: Move mc arg last in get_matching_{microcode|sig}
x86/microcode/intel: Simplify generic_load_microcode_early()
x86/microcode: Consolidate family,model, ... code
x86/microcode/intel: Rename update_match_revision()
x86/microcode/intel: Sanitize _save_mc()
x86/microcode/intel: Make _save_mc() return the updated saved count
x86/microcode/intel: Simplify load_ucode_intel_bsp()
x86/microcode/intel: Get rid of last arg to load_ucode_intel_bsp()
x86/microcode/intel: Do the mc_saved_src NULL check first
x86/microcode/intel: Check if microcode was found before applying
x86/microcode/intel: Fix out of bounds memory access to the extended header
Pull x86 fpu changes from Ingo Molnar:
"Various x86 FPU handling cleanups, refactorings and fixes (Borislav
Petkov, Oleg Nesterov, Rik van Riel)"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/fpu: Kill eager_fpu_init_bp()
x86/fpu: Don't allocate fpu->state for swapper/0
x86/fpu: Rename drop_init_fpu() to fpu_reset_state()
x86/fpu: Fold __drop_fpu() into its sole user
x86/fpu: Don't abuse drop_init_fpu() in flush_thread()
x86/fpu: Use restore_init_xstate() instead of math_state_restore() on kthread exec
x86/fpu: Introduce restore_init_xstate()
x86/fpu: Document user_fpu_begin()
x86/fpu: Factor out memset(xstate, 0) in fpu_finit() paths
x86/fpu: Change xstateregs_get()/set() to use ->xsave.i387 rather than ->fxsave
x86/fpu: Don't abuse FPU in kernel threads if use_eager_fpu()
x86/fpu: Always allow FPU in interrupt if use_eager_fpu()
x86/fpu: __kernel_fpu_begin() should clear fpu_owner_task even if use_eager_fpu()
x86/fpu: Also check fpu_lazy_restore() when use_eager_fpu()
x86/fpu: Use task_disable_lazy_fpu_restore() helper
x86/fpu: Use an explicit if/else in switch_fpu_prepare()
x86/fpu: Introduce task_disable_lazy_fpu_restore() helper
x86/fpu: Move lazy restore functions up a few lines
x86/fpu: Change math_error() to use unlazy_fpu(), kill (now) unused save_init_fpu()
x86/fpu: Don't do __thread_fpu_end() if use_eager_fpu()
...
Pull x86 debug changes from Ingo Molnar:
"Stack printing fixlets"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kernel: Use kstack_end() in dumpstack_64.c
x86/kernel: Fix output of show_stack_log_lvl()
Pull x86 cacheinfo sysfs changes from Ingo Molnar:
"This tree converts the x86 cacheinfo sysfs code to use the generic
code in drivers/base/cacheinfo.c.
It's not intended to change the sysfs ABI:
'This patch neither alters any existing sysfs entries nor their
formating, however since the generic cacheinfo has switched to
use the device attributes instead of the traditional raw
kobjects, a directory named 'power' along with its standard
attributes are added similar to any other device'"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/cacheinfo: Fix cache_get_priv_group() for Intel processors
x86/cacheinfo: Move cacheinfo sysfs code to generic infrastructure
Pull x86 cleanups from Ingo Molnar:
"Various cleanups"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/iommu: Fix header comments regarding standard and _FINISH macros
x86/earlyprintk: Put CONFIG_PCI-only functions under the #ifdef
x86: Fix up obsolete __cpu_set() function usage
Pull x86 boot changes from Ingo Molnar:
"A number of cleanups"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Standardize strcmp()
x86/boot/64: Remove pointless early_printk() message
x86/boot/video: Move the 'video_segment' variable to video.c
