Provide infrastructure for PHY drivers to report the cable test
results. A netlink skb is associated to the phydev. Helpers will be
added which can add results to this skb. Once the test has finished
the results are sent to user space.
When netlink ethtool is not part of the kernel configuration stubs are
provided. It is also impossible to trigger a cable test, so the error
code returned by the alloc function is of no consequence.
v2:
Include the status complete in the netlink notification message
v4:
Replace -EINVAL with -EMSGSIZE
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make some helpers for building ethtool netlink messages available
outside the compilation unit, so they can be used for building
messages which are not simple get/set.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the attributes needed to report cable test results to userspace.
The reports are expected to be per twisted pair. A nested property per
pair can report the result of the cable test. A nested property can
also report the length of the cable to any fault.
v2:
Grammar fixes
Change length from u16 to u32
s/DEV/HEADER/g
Add status attributes
Rename pairs from numbers to letters.
v3:
Fixed example in document
Add ETHTOOL_A_CABLE_NEST_* enum
Add ETHTOOL_MSG_CABLE_TEST_NTF to documentation
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new ethtool netlink calls to trigger the starting of a PHY cable
test.
Add Kconfig'ury to ETHTOOL_NETLINK so that PHYLIB is not a module when
ETHTOOL_NETLINK is builtin, which would result in kernel linking errors.
v2:
Remove unwanted white space change
Remove ethnl_cable_test_act_ops and use doit handler
Rename cable_test_set_policy cable_test_act_policy
Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY
v3:
Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY from documentation
Remove unused cable_test_get_policy
Add Reviewed-by tags
v4:
Remove unwanted blank line
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some PHYs are not capable of generating interrupts when a cable test
finished. They do however support interrupts for normal operations,
like link up/down. As such, the PHY state machine would normally not
poll the PHY.
Add support for indicating the PHY state machine must poll the PHY
when performing a cable test.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Running a cable test is desruptive to normal operation of the PHY and
can take a 5 to 10 seconds to complete. The RTNL lock cannot be held
for this amount of time, and add a new state to the state machine for
running a cable test.
The driver is expected to implement two functions. The first is used
to start a cable test. Once the test has started, it should return.
The second function is called once per second, or on interrupt to
check if the cable test is complete, and to allow the PHY to report
the status.
v2:
Rename phy_cable_test_abort to phy_abort_cable_test
Return different extack when already running test
Use phy_init_hw() to reset the PHY
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable status is being initializeed with a value that is never read
and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable ret is being initializeed with a value that is never read
and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable ret is being initializeed with a value that is never read
and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current codes, the octeontx2 uses its own method to allocate
the pool buffers, but there are some issues in this implementation.
1. We have to run the otx2_get_page() for each allocation cycle and
this is pretty error prone. As I can see there is no invocation
of the otx2_get_page() in otx2_pool_refill_task(), this will leave
the allocated pages have the wrong refcount and may be freed wrongly.
2. It wastes memory. For example, if we only receive one packet in a
NAPI RX cycle, and then allocate a 2K buffer with otx2_alloc_rbuf()
to refill the pool buffers and leave the remain area of the allocated
page wasted. On a kernel with 64K page, 62K area is wasted.
IMHO it is really unnecessary to implement our own method for the
buffers allocate, we can reuse the napi_alloc_frag() to simplify
our code.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
mlxsw: spectrum: Enforce some HW limitations for matchall TC offload
Jiri says:
There are some limitations for TC matchall classifier offload that are
given by the mlxsw HW dataplane. It is not possible to do sampling on
egress and also the mirror/sample vs. ACL (flower) ordering is fixed. So
check this and forbid to offload incorrect setup.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure that the drive restricts incorrect order of inserted matchall
vs. flower rules.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check that matchall rules with sample actions are not possible to be
inserted to egress.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The file is about to contain matchall restrictions too, so change the
name to make it more generic.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On ingress, the matchall rules doing mirroring and sampling are offloaded
into hardware blocks that are processed before any flower rules.
On egress, the matchall mirroring rules are offloaded into hardware
block that is processed after all flower rules.
Therefore check the priorities of inserted flower rules against
existing matchall rules and ensure the correct ordering.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On ingress, the matchall rules doing mirroring and sampling are offloaded
into hardware blocks that are processed before any flower rules.
On egress, the matchall mirroring rules are offloaded into hardware
block that is processed after all flower rules.
Therefore check the priorities of inserted matchall rules against
existing flower rules and ensure the correct ordering.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce an infrastructure that allows to get minimum and maximum
rule priority for specified chain. This is going to be used by
a subsequent patch to enforce ordering between flower and
matchall filters.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As there are going to be other matchall specific fields in flow
structure, put the existing list field into matchall substruct.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce an infrastructure that allows to get minimum and maximum
rule priority for specified chain. This is going to be used by
a subsequent patch to enforce ordering between flower and
matchall filters.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HW supports packet sampling on ingress only. Check and fail if user
is adding sample on egress.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
adds ndo_set_vf_rate/ndo_set_vf_spoofchk/ndo_set_vf_link_state
to configure netdev of virtual function
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This series includes updates to mlx5 netdev driver and bonding updates
to support getting the next active tx slave.
1) merge commit with mlx5-next that includes bonding updates from Maor
Bonding: Add support to get xmit slave
2) Maxim makes some general code improvements to TX data path
3) Tariq makes some general code improvements to kTLS and mlx5 accel layer
in preparation for mlx5 TLS RX.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl62ZFYACgkQSD+KveBX
+j7lMQgAi5KMceqekMRec1JzXHFOxJ8IIUzLVNW7dQt+2WKNZBTsY0nFo6dVa1NY
zwbd64VtBG9mojC51CNNY3+KlkC5NWjszkEYIAnektGP1vcLtcoq/t1C9XIEroS5
thWoA3/KsUg0Ocm3ilhdbaZMle2PXzPO7mo6UBt9WadE21rNB6h8TN05Mton+a+M
W3WlCC9UuwCA5NH7DwqiVYxwM+3P/8n1iXXcfR41oggA1eGPf4pUrR2MhAtvuK5k
4scdtUnBqvSomZwO0jadp4+XG8H3gLPyqToH1uK49QQbpD6gF7+eRuYvVttutfVk
/df41bz1JTHnCQ1wSTxviHQS356TJQ==
=ThX8
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2020-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-05-09
This series includes updates to mlx5 netdev driver and bonding updates
to support getting the next active tx slave.
1) merge commit with mlx5-next that includes bonding updates from Maor
Bonding: Add support to get xmit slave
2) Maxim makes some general code improvements to TX data path
3) Tariq makes some general code improvements to kTLS and mlx5 accel layer
in preparation for mlx5 TLS RX.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark Starovoytov says:
====================
net: atlantic: driver updates
This patch series contains several minor cleanups for the previously
submitted series.
We also add Marvell copyrights on newly touched files.
v2:
* accommodated review comments related to the last patch in series
(MAC generation)
v1: https://patchwork.ozlabs.org/cover/1285011/
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch unifies invalid MAC address handling with other drivers.
Basically we've switched to using standard APIs (is_valid_ether_addr /
eth_hw_addr_random) where possible.
It's worth noting that some of engineering Aquantia NICs might be
provisioned with a partially zeroed out MAC, which is still invalid,
but not caught by is_valid_ether_addr(), so we've added a special
handling for this case.
Also adding a warning in case of fallback to random MAC, because
this shouldn't be needed on production NICs, they should all be
provisioned with unique MAC.
NB! Default systemd/udevd configuration is 'MACAddressPolicy=persistent'.
This causes MAC address to be persisted across driver reloads and
reboots. We had to change it to 'none' for verification purposes.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch removes unnecessary check for boot code survivability before
reset request.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No need to call hw_atl_b0_hw_rss_set from hw_atl2_hw_rss_set
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TPO2 was introduced in B0 only, no reason to check for it in A0 code.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch changes the constant name to a more logical "2G5"
(for 2.5G speeds).
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes a couple of minor merge issues found in macsec_api.c
after corresponding patch series has been applied.
These are not real bugs, so pushing to net-next.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patches fixes the review comment made by Jakub Kicinski
in the "net: atlantic: A2 support" patch series.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same WQE opcode might be used in different ICOSQ flows
and WQE types.
To have a better distinguishability, replace it with an enum that
better indicates the WQE type and flow it is used for.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The include of Ethernet driver header in core is not needed
and actually wrong.
Remove it.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Struct assignment looks more clean, and implies resetting
the not assigned fields to zero, instead of holding values
from older ring cycles.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Into the txrx header file.
The mlx5e_sq_wqe_info structure describes WQE info for the ICOSQ,
rename it to better reflect this.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Every single DUMP WQE resides in a single WQEBB.
As the pi is calculated per each one separately, there is
no real need for a contiguous room for them, allow them to populate
different WQ fragments.
This reduces WQ waste and improves its utilization.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
For the static and progress context params WQEs, do the edge
filling separately.
This improves the WQ utilization, code readability, and reduces
the chance of future bugs.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
After previous modifications, the offloads are no longer called one by
one, the pi is calculated and the wqe is cleared on between of TLS and
IPSEC offloads, which doesn't quite fit mlx5e_accel_handle_tx's purpose.
This patch splits mlx5e_accel_handle_tx into two functions that
correspond to two logical phases of running offloads:
1. Before fetching a WQE. Here runs the code that can post WQEs on its
own, before the main WQE is fetched. It's the main part of TLS offload.
2. After fetching a WQE. Here runs the code that updates the WQE's
fields, but can't post other WQEs any more. It's a minor part of TLS
offload that sets the tisn field in the cseg, and eseg-based offloads
(currently IPSEC, and later patches will move GENEVE and checksum
offloads there, too).
It allows to make mlx5e_xmit take care of all actions needed to transmit
a packet in the right order, improve the structure of the code and
reduce unnecessary operations. The structure will be further improved in
the following patches (all eseg-based offloads will be moved to a single
place, and reserving space for the main WQE will happen between phase 1
and phase 2 of offloads to eliminate unneeded data movements).
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5e_udp_gso_handle_tx_skb updates the length field in the UDP header
in case of GSO. It doesn't interfere with other offloads, so do it first
to simplify further restructuring of the code. This way we'll make all
independent modifications to the SKB before starting to work with WQEs.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
TLS offload may write a 32-bit field (tisn) to the cseg of the WQE. To
do that, it receives pi and wqe pointers. As TLS offload may also send
additional WQEs, it has to update pi and wqe, and in many cases it even
doesn't use pi calculated before and wqe zeroed before and does it
itself. Also, mlx5e_sq_xmit has to copy the whole cseg if it goes to the
mlx5e_fill_sq_frag_edge flow. This all is not efficient.
It's more efficient to do the following:
1. Just return tisn from TLS offload and make the caller fill it in a
more appropriate place.
2. Calculate pi and clear wqe after calling TLS offload.
3. If TLS offload has to send WQEs, calculate pi and clear wqe just
before that. It's already done in all places anyway, so this commit
allows to remove some redundant memsets and calls.
Copying of cseg will be eliminated in one of the following commits, and
all other stuff is done here.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
IPSEC offload needs to modify the eseg of the WQE that is being filled,
but it receives a pointer to the whole WQE. To make the contract
stricter, pass only the pointer to the eseg of that WQE. This commit is
preparation for the following refactoring of offloads in the TX path and
for the MPWQE support.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5e_sq_xmit and mlx5i_sq_xmit always return NETDEV_TX_OK. Drop the
return value to simplify the code.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Both INNOVA and ConnectX TLS offloads perform the same checks in the
beginning. Unify them to reduce repeating code. Do WARN_ON_ONCE on
netdev mismatch and finish with an error in both offloads, not only in
the ConnectX one.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
TLS and IPSEC offloads currently return struct sk_buff *, but the value
is either NULL or the same skb that was passed as a parameter. Return
bool instead to provide stronger guarantees to the calling code (it
won't need to support handling a different SKB that could be potentially
returned before this change) and to simplify restructuring this code in
the following commits.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This merge includes updates to bonding driver needed for the rdma stack,
to avoid conflicts with the RDMA branch.
Maor Gottlieb Says:
====================
Bonding: Add support to get xmit slave
The following series adds support to get the LAG master xmit slave by
introducing new .ndo - ndo_get_xmit_slave. Every LAG module can
implement it and it first implemented in the bond driver.
This is follow-up to the RFC discussion [1].
The main motivation for doing this is for drivers that offload part
of the LAG functionality. For example, Mellanox Connect-X hardware
implements RoCE LAG which selects the TX affinity when the resources
are created and port is remapped when it goes down.
The first part of this patchset introduces the new .ndo and add the
support to the bonding module.
The second part adds support to get the RoCE LAG xmit slave by building
skb of the RoCE packet based on the AH attributes and call to the new
.ndo.
The third part change the mlx5 driver driver to set the QP's affinity
port according to the slave which found by the .ndo.
====================
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The variable tx_done is being assigned with a value that is never read
as the function returns a few statements later. The assignment is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable size is being assigned with a value that is never read,
the assignment is redundant and cab be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable ret is being assigned with a value that is never read,
the assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the value for 'off' is computed using a multiplication and
a couple of statements later off is being incremented by len and
this value is never read. Clean up the code by removing the
multiplication and just increment off by len on each iteration.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
