Now that the internal code all works on intel_uncore, flip the
external-facing interface.
v2: fix GVT.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319183543.13679-4-daniele.ceraolospurio@intel.com
Large ppGTT are differentiated by the requirement to go to four levels
to address more than 32b. Given the introduction of more 4 level ppGTT
with different sizes of addressable bits, rename i915_vm_is_48b() to
better reflect the commonality of using 4 levels.
Based on a patch by Bob Paauwe.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-4-chris@chris-wilson.co.uk
For compatibility reasons, we only care if the vGPU host provides
support for full-ppgtt. This is independent of the addressable memory
size, so remove the conflation of 48b from the capability name.
Based on a patch by Bob Paauwe.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-1-chris@chris-wilson.co.uk
In preparation for an ever growing number of engines and so ever
increasing static array of HW contexts within the GEM context, move the
array over to an rbtree, allocated upon first use.
Unfortunately, this imposes an rbtree lookup at a few frequent callsites,
but we should be able to mitigate those by moving over to using the HW
context as our primary type and so only incur the lookup on the boundary
with the user GEM context and engines.
v2: Check for no HW context in guc_stage_desc_init
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-4-chris@chris-wilson.co.uk
In the next patch, we are introducing a broad virtual engine to encompass
multiple physical engines, losing the 1:1 nature of BIT(engine->id). To
reflect the broader set of engines implied by the virtual instance, lets
store the full bitmask.
v2: Use intel_engine_mask_t (s/ring_mask/engine_mask/)
v3: Tvrtko voted for moah churn so teach everyone to not mention ring
and use $class$instance throughout.
v4: Comment upon the disparity in bspec for using VCS1,VCS2 in gen8 and
VCS[0-4] in later gen. We opt to keep the code consistent and use
0-index naming throughout.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305180332.30900-1-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ
GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf
nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz
+t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM
kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN
o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj
BW9GgU8=
=ZizU
-----END PGP SIGNATURE-----
Merge v5.0-rc7 into drm-next
Backmerging for nouveau and imx that needed some fixes for next pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Implement VFIO EDID region for vgpu. Support EDID blob update and notify
guest on link state change via hotplug event.
v3: move struct edid_region to kvmgt.c <zhenyu>
v2: add EDID sanity check and size update <zhenyu>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add function to emulate hotplug interrupt for SKL/KBL platforms
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
These functions will get default resolution according to vgpu type.
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
GVT-g will shadow the privilege batch buffer and the indirect context
during command scan, move the release process into
intel_vgpu_destroy_workload() to ensure the resources are recycled
properly.
Fixes: 0cce2823ed ("drm/i915/gvt/kvmgt:Refine error handling for prepare_execlist_workload")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This is to fix missed mmap range check on vGPU bar2 region
and only allow to map vGPU allocated GMADDR range, which means
user space should support sparse mmap to get proper offset for
mmap vGPU aperture. And this takes care of actual pgoff in mmap
request as original code always does from beginning of vGPU
aperture.
Fixes: 659643f7d8 ("drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT")
Cc: "Monroy, Rodrigo Axel" <rodrigo.axel.monroy@intel.com>
Cc: "Orrala Contreras, Alfredo" <alfredo.orrala.contreras@intel.com>
Cc: stable@vger.kernel.org # v4.10+
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
VFIO region space is allocated when one region is registered for
one vgpu. So free the space when destroy the vgpu.
Also change the parameter of detach_vgpu callback to use vgpu directly.
Fixes: b851adeac0 ("drm/i915/gvt: Add opregion support")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The majority of runtime-pm operations are bounded and scoped within a
function; these are easy to verify that the wakeref are handled
correctly. We can employ the compiler to help us, and reduce the number
of wakerefs tracked when debugging, by passing around cookies provided
by the various rpm_get functions to their rpm_put counterpart. This
makes the pairing explicit, and given the required wakeref cookie the
compiler can verify that we pass an initialised value to the rpm_put
(quite handy for double checking error paths).
For regular builds, the compiler should be able to eliminate the unused
local variables and the program growth should be minimal. Fwiw, it came
out as a net improvement as gcc was able to refactor rpm_get and
rpm_get_if_in_use together,
v2: Just s/rpm_put/rpm_put_unchecked/ everywhere, leaving the manual
mark up for smaller more targeted patches.
v3: Mention the cookie in Returns
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-2-chris@chris-wilson.co.uk
The newly updated guest driver could program 0x21f0 via lri and srm,
without F_CMD_ACCESS flag cmd parser will stop parser reset cmd.
0x21f0 applies to BDW, SKL, KBL, BXT and CFL.
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Refine the code since the port select definition for CFL is different
than SKL/BXT.
v2:
- replace PCH_CNP with IS_COFFEELAKE. (zhenyu)
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reuse the gmbus pin macro from i915_reg.h file to improve readablity.
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Use INTEL_GEN to simplify the code for SKL+ platforms.
v2:
- split the enabling code into final one to identify any regression.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Fei Jiang <fei.jiang@intel.com>
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add registers of 0x4ab8 and 0x2248 into MMIO handler.
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Fei Jiang <fei.jiang@intel.com>
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
It doesn't need to be changed, make it const. The string literals should
anyway be referred to as const data.
The following gets moved to rodata section:
0000000000000080 l O .rodata 0000000000001c00 cmd_info
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
It doesn't need to be changed, make it const. The string literals should
anyway be referred to as const data.
The following gets moved to rodata section:
0000000000000410 l O .rodata 0000000000000018 decode_info_mi
0000000000000390 l O .rodata 0000000000000018 decode_info_3d_media
00000000000003e0 l O .rodata 0000000000000018 decode_info_2d
0000000000000330 l O .rodata 0000000000000018 decode_info_mfx_vc
00000000000002e0 l O .rodata 0000000000000018 decode_info_vebox
0000000000000300 l O .rodata 0000000000000028 sub_op_vebox
0000000000000360 l O .rodata 0000000000000028 sub_op_mfx_vc
00000000000003c0 l O .rodata 0000000000000020 sub_op_3d_media
0000000000000400 l O .rodata 0000000000000010 sub_op_2d
0000000000000430 l O .rodata 0000000000000010 sub_op_mi
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
drmP.h is deprecated and no longer needed.
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
In commit 6bb2a2af8b ("drm/i915/gvt: Fix crash after request->hw_context change"),
forgot to handle workload scan path in ELSP handler case which was to
optimize scanning earlier instead of in gvt submission thread, so request
alloc and add was splitting then which is against right process.
This trys to do a partial revert of that commit which still has workload
request alloc helper and make sure shadow state population is handled after
request alloc for target state buffer.
v3: Fix missed workload status setting in request alloc error path
v2: Fix dispatch workload err path that should add request after alloc anyway.
Fixes: 6bb2a2af8b ("drm/i915/gvt: Fix crash after request->hw_context change")
Cc: Bin Yang <bin.yang@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Bin Yang <bin.yang@intel.com>
Reviewed-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Generally catch up with 5.0-rc1, and specifically get the changes:
96d4f267e4 ("Remove 'type' argument from access_ok() function")
0b2c8f8b6b ("i915: fix missing user_access_end() in page fault exception case")
594cc251fd ("make 'user_access_begin()' do 'access_ok()'")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-----BEGIN PGP SIGNATURE-----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=hFld
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Happy New Year, just decloaking from leave to get some stuff from the
last week in before rc1:
core:
- two regression fixes for damage blob and atomic
i915 gvt:
- Some missed GVT fixes from the original pull
amdgpu:
- new PCI IDs
- SR-IOV fixes
- DC fixes
- Vega20 fixes"
* tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm: (53 commits)
drm: Put damage blob when destroy plane state
drm: fix null pointer dereference on null state pointer
drm/amdgpu: Add new VegaM pci id
drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug output
drm/amdgpu: add Vega20 PSP ASD firmware loading
drm/amd/display: Fix MST dp_blank REG_WAIT timeout
drm/amd/display: validate extended dongle caps
drm/amd/display: Use div_u64 for flip timestamp ns to ms
drm/amdgpu/uvd:Change uvd ring name convention
drm/amd/powerplay: add Vega20 LCLK DPM level setting support
drm/amdgpu: print process info when job timeout
drm/amdgpu/nbio7.4: add hw bug workaround for vega20
drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12
drm/amd/display: Optimize passive update planes.
drm/amd/display: verify lane status before exiting verify link cap
drm/amd/display: Fix bug with not updating VSP infoframe
drm/amd/display: Add retry to read ddc_clock pin
drm/amd/display: Don't skip link training for empty dongle
drm/amd/display: Wait edp HPD to high in detect_sink
drm/amd/display: fix surface update sequence
...
This trys to make 'kvmgt' module as self loadable instead of loading
by i915/gvt device model. So hypervisor specific module could be
stand-alone, e.g only after loading hypervisor specific module, GVT
feature could be enabled via specific hypervisor interface, e.g VFIO/mdev.
So this trys to use hypervisor module register/unregister interface
for that. Hypervisor module needs to take care of module reference
itself when working for hypervisor interface, e.g for VFIO/mdev,
hypervisor module would reference counting mdev when open and release.
This makes 'kvmgt' module really split from GVT device model. User
needs to load 'kvmgt' to enable VFIO/mdev interface.
v6:
- remove unused variable
v5:
- put module reference in register error path
v4:
- fix checkpatch warning
v3:
- Fix module reference handling for device open and release. Unused
mdev devices would be cleaned up in device unregister when module unload.
v2:
- Fix kvmgt order after i915 for built-in case
Cc: "Yuan, Hang" <hang.yuan@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: "He, Min" <min.he@intel.com>
Reviewed-by: Yuan, Hang <hang.yuan@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Define IS_GEN() similarly to our IS_GEN_RANGE(). but use gen instead of
gen_mask to do the comparison. Now callers can pass then gen as a parameter,
so we don't require one macro for each gen.
The following spatch was used to convert the users of these macros:
@@
expression e;
@@
(
- IS_GEN2(e)
+ IS_GEN(e, 2)
|
- IS_GEN3(e)
+ IS_GEN(e, 3)
|
- IS_GEN4(e)
+ IS_GEN(e, 4)
|
- IS_GEN5(e)
+ IS_GEN(e, 5)
|
- IS_GEN6(e)
+ IS_GEN(e, 6)
|
- IS_GEN7(e)
+ IS_GEN(e, 7)
|
- IS_GEN8(e)
+ IS_GEN(e, 8)
|
- IS_GEN9(e)
+ IS_GEN(e, 9)
|
- IS_GEN10(e)
+ IS_GEN(e, 10)
|
- IS_GEN11(e)
+ IS_GEN(e, 11)
)
v2: use IS_GEN rather than GT_GEN and compare to info.gen rather than
using the bitmask
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181212181044.15886-2-lucas.demarchi@intel.com
The parameter 'void *gvt' is not used and required for hypervisor's
exit call. Even for non-merged Xen hypervisor support. So just remove it.
Reviewed-by: Yuan, Hang <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Don't mark hypervisor module's host_init as optional,
but mandatory required.
Reviewed-by: Yuan, Hang <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
There is a spelling mistake in an error message, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Recently gvt shadow ctx create ppgtt table and this ppgtt's root
pointer is modified at workload dispatch, then we lose the original
ppgtt's root pointer, this causes the ppgtt destroy function abnormal
as it will release the wrong root table.
This patch save i915 context ppgtt root pointer at shadow
ctx creation and restore it at shadow ctx destruction.
v2: Split save and restore function (Zhenyu)
Fixes:4f15665ccbba("drm/i915: Add ppgtt to GVT GEM context")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Fix a typo in the error message reporting.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
s/ME_SEMAPHORE_/MI_SEMAPHORE_
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Host print below warning message when creating guest:
"gvt: vgpu(2) Invalid FORCE_NONPRIV write 83a8".
Register 0x83a8 should be in force-to-nonpriv whitelist as required by
guest
v2: update commit message to describe purpose of this patch in detail
(zhenyu wang)
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Commit b244ffa15c ("drm/i915/gvt: Fix drm_format_mod value for vGPU
plane") introduced a regression issue to the tiled memory decoding on BDW.
This patch can fix this issue.
Here is the issue detail: https://github.com/intel/gvt-linux/issues/61
v1->v2:
- Refine the commit message. (Zhenyu)
Fixes: b244ffa15c8b("drm/i915/gvt: Fix drm_format_mod value for vGPU plane")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: stable@vger.kernel.org # v4.19+
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Found by smatch:
drivers/gpu/drm/i915/gvt/gtt.c:2452 intel_vgpu_destroy_ggtt_mm() error: dereferencing freed memory 'pos'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Some engines are not available for all Gens. eg, Gen11 introduced
VCS3/VCS4/VECS2, and VCS2 is not supported on some Gen9 machines. So need to
add check before access them.
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Signed-off-by: Yakui Zhao <Yakui.Zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
gvt-fixes-2018-11-07
- Fix invalidate of old ggtt entry (Hang)
- Fix partial ggtt entry update in any order (Hang)
- Fix one mask setting for chicken reg (Xinyun)
- Fix eDP warning in guest (Longhe)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107023137.GO25194@zhen-hp.sh.intel.com
Although there's nothing crucial missing, it's been a long time since
the last backmerge. Catch up with drm-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
GVT-g only simulates DP port for guest and leaves EDP_PSR_IMR
and EDP_PSR_IIR registers as default MMIO read/write.
So guest won't get expected initial values of these registers when
initializing the gpu driver, which results in following warning and logs.
--------
Interrupt register 0x64838 is not zero: 0xffffffff
WARNING: CPU: 1 PID: 157 at drivers/gpu/drm/i915/i915_irq.c:177
gen3_assert_iir_is_zero+0x38/0xa0
Call Trace:
gen8_de_irq_postinstall+0xa7/0x400
gen8_irq_postinstall+0x27/0x80
drm_irq_install+0xbc/0x140
i915_driver_load+0xa9d/0xd50
--------
Because GVT-g does not handle EDP(embedded DP) simulation for guests,
always set EDP_PSR_IMR and EDP_PSR_IIR to value 0.
Signed-off-by: Longhe Zheng <longhe.zheng@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
