Optimise 'strncpy' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Optimise 'memset' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
This adds the option to build the Linux kernel using only the
microMIPS ISA. The resulting kernel binary is, at a minimum,
20% smaller than using the MIPS32R2 ISA.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Partially revert commit e0c14a260d66ba35935600d6435940a566fe806b
and turn off LL/SC when building a pure microMIPS kernel. This is
a temporary fix until the cmpxchg assembly macro functions are
re-written to not use the HI/LO registers in address calculations.
Also add .insn in selected user access functions which would
otherwise produce ISA mode jump incompatibilities. This is also a
temporary fix.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Add logic needed to handle unaligned accesses in microMIPS mode.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Add logic needed to properly calculate exceptions for delay slots
when in microMIPS mode.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
All exceptions must be taken in microMIPS mode, never in classic
MIPS mode or the kernel falls apart. A few NOP instructions are
used to maintain the correct alignment of microMIPS versions of
the exception vectors.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Add logic needed to do floating point emulation in microMIPS mode.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Steven J. Hill <Steven. Hill@imgtec.com>
The macros did not properly take into account the ISA that
the kernel was being compiled with. A classic MIPS kernel
will have the standard 'uasm_i_##op' macro functions with
'MM_uasm_i_##op' macro functions for the microMIPS version.
A pure microMIPS kernel will have the standard macros with
'CL_uasm_i_##op' macro functions for the classic version.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Jump or branch target addresses have the first bit set. The
original mask did not take this into account and will cause
a field overflow warning for the target address when a jump
immediate instruction is built.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Changes for pure microMIPS cores to dynamically determine the ASID
size at boot time.
Includes bug fix https://patchwork.linux-mips.org/patch/5230/
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Original patch by Ralf Baechle and removed by Harold Koerfgen
with commit f67e4ffc79905482c3b9b8c8dd65197bac7eb508. This
allows for more generic kernels since the size of the ASID
and corresponding masks can be determined at run-time. This
patch is also required for the new Aptiv cores and has been
tested on Malta and Malta Aptiv platforms.
[ralf@linux-mips.org: Added relevant part of fix
https://patchwork.linux-mips.org/patch/5213/]
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove 'arch/mips/include/asm/mips-boards/prom.h' and get rid of
all inclusions of it by Malta and SEAD-3 platforms.
[ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS:
ar7 powertv build"].
[ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS:
unbreak powertv build"].
[ralf@linux-mips.org: Test. Build. Your. Fscking. Code. Or...]
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Add parsing of the environment and command line variables passed to
the kernel to the firmware library.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Add declaration of 'mips_scroll_message' and 'mips_display_message'
to the common generic header file for the MIPS Technologies Inc.
development boards.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Setting the LED_CORE_SUSPENDRESUME flag causes the LED driver core to call
led_classdev_suspend/led_classdev_resume during suspend/resume. Since this is
exactly what the driver's custom suspend/resume callbacks do we can replace them
by setting the LED_CORE_SUSPENDRESUME flag.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Some MIPS controllers have hardware I/O coherency. This patch
detects those and turns off software coherency. A new kernel
command line option also allows the user to manually turn
software coherency on or off.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Add in new Malta config files for SMVP, SMTC, and APRP. Also update
the original 'malta_defconfig' config file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Add two new macros for microMIPS. One checks if an exception was
taken in either microMIPS or classic MIPS mode. The other checks
if a microMIPS instruction is 16-bit or 32-bit in length.
[ralf@linux-mips.org: Removed unnecessary parenthesis as noted by
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>]
Signed-off-by: Steven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: kevink@paralogos.com
Cc: ddaney.cavm@gmail.com
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Patchwork: https://patchwork.linux-mips.org/patch/4924/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit 49df26472338b935fd5781bf94a77a88b148a716)
Add new file 'uasm-micromips.c' that allows the micro assembler
to generate microMIPS ISA code. It can be included in the kernel
alongside the classic ISA as long as the platform supports the
microMIPS ISA.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: kevink@paralogos.com
Cc: ddaney.cavm@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/4923/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit 5f011a866afbd03a5379f67f4e70e5efbdfc16e9)
Split 'uasm.c' into two files. The new file 'uasm-mips.c' has the
functions specific to the classic MIPS ISA. The 'uasm.c' file
contains common code that can be used by classic or other ISAs
that could be supported by the kernel.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: kevink@paralogos.com
Cc: ddaney.cavm@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/4922/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit 0961103562ab958fa74f35043bf4f72e51ed6155)
Pull MIPS fixes from Ralf Baechle:
"Fixes for a number of small glitches in various corners of the MIPS
tree. No particular areas is standing out.
With this applied all MIPS defconfigs are building fine. No merge
conflicts are expected."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Delete definition of SA_RESTORER.
MIPS: Fix ISA level which causes secondary cache init bypassing and more
MIPS: Fix build error cavium-octeon without CONFIG_SMP
MIPS: Kconfig: Rename SNIPROM too
MIPS: Alchemy: Fix typo "CONFIG_DEBUG_PCI"
MIPS: Unbreak function tracer for 64-bit kernel.
SA_RESTORER used to be defined as 0x04000000 but only the O32 ABI ever
supported its use and no libc was using it, so the entire sa-restorer
functionality was removed with lmo commit 39bffc12c3580ab [Zap sa_restorer.]
for 2.5.48 retaining only the SA_RESTORER definition as a reminder to avoid
accidental reuse of the mask bit.
Upstream cdef9602fbf1871a43f0f1b5cea10dd0f275167d [signal: always clear
sa_restorer on execve] adds code that assumes sa_sigaction has an
sa_restorer field, if SA_RESTORER is defined which would break MIPS.
So remove the SA_RESTORER definition before the v3.8.4 merge.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit 17da8d63add23830892ac4dc2cbb3b5d4ffb79a8)
The commit a96102be70 introduced set_isa() where compatible ISA info is
also set aside from the one gets passed in. It means, for example, 1004K
will have MIPS_CPU_ISA_M32R2/M32R1/II/I flags. This leads to things like
the following inappropriate:
if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
c->isa_level == MIPS_CPU_ISA_M32R2 ||
c->isa_level == MIPS_CPU_ISA_M64R1 ||
c->isa_level == MIPS_CPU_ISA_M64R2)
This patch fixes it.
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 7517de3486 ("MIPS: Alchemy: Redo
PCI as platform driver") added a reference to CONFIG_DEBUG_PCI. Change
it to CONFIG_PCI_DEBUG, as that is a valid Kconfig macro.
Also add a newline to a debugging printk that this fix enables.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 58b69401c7 [MIPS: Function tracer: Fix broken function tracing]
completely broke the function tracer for 64-bit kernels. The symptom is
a system hang very early in the boot process.
The fix: Remove/fix $sp adjustments for 64-bit case.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Al Cooper <alcooperx@gmail.com>
Cc: viric@viric.name
Cc: stable@vger.kernel.org # 3.8.x
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull MIPS fixes from Ralf Baechle:
"A collection of fixes pretty much across the MIPS code. Even the
change to include/linux/signal.h by David Howells' 2a1486981c ("Fix
breakage in MIPS siginfo handling") should be considered MIPS-specific
as it touches an ifdefed segment that is only relevant to MIPS and
which unfortunately can't be made to go away entirely."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
Fix breakage in MIPS siginfo handling
Revert "MIPS: BCM63XX: Call board_register_device from device_initcall()"
MIPS: BCM63XX: Make nvram checksum failure non fatal
MIPS: Fix code generation for non-DSP capable CPUs
MIPS: Fix inconsistent formatting inside /proc/cpuinfo
MIPS: SEAD3: Enable LL/SC.
MIPS: Get rid of CONFIG_CPU_HAS_LLSC again
MIPS: Add dependencies for HAVE_ARCH_TRANSPARENT_HUGEPAGE
MIPS: VR4133: Fix probe for LL/SC.
MIPS: Fix logic errors in bitops.c
MIPS: Use CONFIG_CPU_MIPSR2 in csum_partial.S
MIPS: compat: Return same error ENOSYS as native for invalid operation.
MIPS's siginfo handling has been broken since this commit:
commit 574c4866e3
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun Nov 25 22:24:19 2012 -0500
consolidate kernel-side struct sigaction declarations
for 64-bit BE MIPS CPUs.
The UAPI variant looks like this:
struct sigaction {
unsigned int sa_flags;
__sighandler_t sa_handler;
sigset_t sa_mask;
};
but the core kernel's variant looks like this:
struct sigaction {
#ifndef __ARCH_HAS_ODD_SIGACTION
__sighandler_t sa_handler;
unsigned long sa_flags;
#else
unsigned long sa_flags;
__sighandler_t sa_handler;
#endif
#ifdef __ARCH_HAS_SA_RESTORER
__sigrestore_t sa_restorer;
#endif
sigset_t sa_mask;
};
The problem is that sa_flags has been changed from an unsigned int to an
unsigned long.
Fix this by making sa_flags unsigned int if __ARCH_HAS_ODD_SIGACTION is
defined.
Whilst we're at it, rename __ARCH_HAS_ODD_SIGACTION to
__ARCH_HAS_IRIX_SIGACTION.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit causes a race between PCI scan and SSB fallback SPROM handler
registration, causing the wifi to not work on slower systems. The only
subsystem touched from board_register_devices is platform device
registration, which is safe as an arch init call.
This reverts commit d64ed7ada2 [MIPS:
BCM63XX: Call board_register_device from device_initcall()].
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
To: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Some vendors modify the nvram layout moving the checksum to a different
place or dropping entirely, so reduce the checksum failure to a warning.
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 32a7ede (MIPS: dsp: Add assembler support for DSP ASEs) has
enabled the use of DSP ASE specific instructions such as rddsp and wrdsp
under the idea that all code path that will make use of these two
instructions are properly checking for cpu_has_dsp to ensure that the
particular CPU we are running on *actually* supports DSP ASE.
This commit actually causes the following oops on QEMU Malta emulating a
MIPS 24Kc without the DSP ASE implemented:
[ 7.960000] Reserved instruction in kernel
[ 7.960000] Cpu 0
[ 7.960000] $ 0 : 00000000 00000000 00000014 00000005
[ 7.960000] $ 4 : 8fc2de48 00000001 00000000 8f59ddb0
[ 7.960000] $ 8 : 8f5ceec4 00000018 00000c00 00800000
[ 7.960000] $12 : 00000100 00000200 00000000 00457b84
[ 7.960000] $16 : 00000000 8fc2ba78 8f4ec980 00000001
[ 7.960000] $20 : 80418f90 00000000 00000000 000002dd
[ 7.960000] $24 : 0000009c 7730d7b8
[ 7.960000] $28 : 8f59c000 8f59dd38 00000001 80104248
[ 7.960000] Hi : 0000001d
[ 7.960000] Lo : 0000000b
[ 7.960000] epc : 801041ec thread_saved_pc+0x2c/0x38
[ 7.960000] Not tainted
[ 7.960000] ra : 80104248 get_wchan+0x48/0xac
[ 7.960000] Status: 1000b703 KERNEL EXL IE
[ 7.960000] Cause : 10800028
[ 7.960000] PrId : 00019300 (MIPS 24Kc)
[ 7.960000] Modules linked in:
[ 7.960000] Process killall (pid: 1574, threadinfo=8f59c000,
task=8fd14558, tls=773aa440)
[ 7.960000] Stack : 8fc2ba78 8012b008 0000000c 0000001d 00000000
00000000 8f58a380
8f58a380 8fc2ba78 80202668 8f59de78 8f468600 8f59de28
801b2a3c 8f59df00 8f98ba20 74696e69
8f468600 8f59de28 801b7308 0081c007 00000000 00000000
00000000 00000000 00000000 00000000
00000000 8fc2bbb4 00000001 0000001d 0000000b 77f038cc
7fe80648 ffffffff ffffffff 00000000
00000001 0016e000 00000000 ...
[ 7.960000] Call Trace:
[ 7.960000] [<801041ec>] thread_saved_pc+0x2c/0x38
[ 7.960000] [<80104248>] get_wchan+0x48/0xac
The disassembly of thread_saved_pc points to the following:
000006d0 <thread_saved_pc>:
6d0: 8c820208 lw v0,520(a0)
6d4: 3c030000 lui v1,0x0
6d8: 24630000 addiu v1,v1,0
6dc: 10430008 beq v0,v1,700 <thread_saved_pc+0x30>
6e0: 00000000 nop
6e4: 3c020000 lui v0,0x0
6e8: 8c43000c lw v1,12(v0)
6ec: 04620004 bltzl v1,700 <thread_saved_pc+0x30>
6f0: 00001021 move v0,zero
6f4: 8c840200 lw a0,512(a0)
6f8: 00031080 sll v0,v1,0x2
6fc: 7c44100a lwx v0,a0(v0) <------------
700: 03e00008 jr ra
704: 00000000 nop
If we specifically disable -mdsp/-mdspr2 for arch/mips/kernel/process.o,
we get the following (non-crashing) assembly:
00000708 <thread_saved_pc>:
708: 8c820208 lw v0,520(a0)
70c: 3c030000 lui v1,0x0
710: 24630000 addiu v1,v1,0
714: 10430009 beq v0,v1,73c <thread_saved_pc+0x34>
718: 00000000 nop
71c: 3c020000 lui v0,0x0
720: 8c42000c lw v0,12(v0)
724: 04420005 bltzl v0,73c <thread_saved_pc+0x34>
728: 00001021 move v0,zero
72c: 8c830200 lw v1,512(a0)
730: 00021080 sll v0,v0,0x2
734: 00431021 addu v0,v0,v1
738: 8c420000 lw v0,0(v0)
73c: 03e00008 jr ra
740: 00000000 nop
The specific line that leads a different assembly being produced is:
unsigned long thread_saved_pc(struct task_struct *tsk)
...
return ((unsigned long *)t->reg29)[schedule_mfi.pc_offset]; <---
The problem here is that the compiler was given the right to use DSP
instructions with the -mdsp / -mdspr2 command-line switches and
performed some optimization for us and used DSP ASE instructions where
we are not checking that the running CPU actually supports DSP ASE.
This patch fixes the issue by partially reverting commit 32a7ede for
arch/mips/kernel/Makefile in order to remove the -mdsp / -mdspr2
compiler command-line switches such that we are now guaranteed that the
compiler will not optimize using DSP ASE reserved instructions. We also
need to fixup the rddsp/wrdsp and m{t,h}{hi,lo}{0,1,2,3} macros in
arch/mips/include/asm/mipsregs.h to tell the assembler that we are going
to explicitely use DSP ASE reserved instructions. The comment in
arch/mips/kernel/Makefile is also updated to reflect that.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
There is a missing " " inside /proc/cpuinfo.
The bad commit was:
commit a96102be70
Author: Steven J. Hill <sjhill@mips.com>
Date: Fri Dec 7 04:31:36 2012 +0000
MIPS: Add printing of ISA version in cpuinfo.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4988/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In commit 887cbce0ad ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS")
I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where
needed. I am not sure what I was thinking. Instead, just directly
select VIRT_TO_BUS where it is needed.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All synthesizable CPU cores that could be loaded into a SEAD3's FPGA are
MIPS32 or MIPS64 CPUs that have ll/sc.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit f7ade3c168 ("MIPS: Get rid of
CONFIG_CPU_HAS_LLSC") did what it promised to do. But since then that
macro and its Kconfig symbol popped up again. Get rid of those again.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4978/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The MIPS implementation of transparent huge-pages (THP) is 64-bit only,
and of course also requires that the CPU supports huge-pages.
Currently it's entirely possible to enable THP in other configurations,
which then fail to build due to pfn_pmd() not being defined.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: linux-mips@linux-mips.org
Acked-by: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/4972/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 92d11594f6 (MIPS: Remove irqflags.h dependency from bitops.h)
factored some of the bitops code out into a separate file
(arch/mips/lib/bitops.c). Unfortunately the logic converting a bit
mask into a boolean result was lost in some of the functions. We had:
int res;
unsigned long shifted_result_bit;
.
.
.
res = shifted_result_bit;
return res;
Which truncates off the high 32 bits (thus yielding an incorrect
value) on 64-bit systems.
The manifestation of this is that a non-SMP 64-bit kernel will not
boot as the bitmap operations in bootmem.c are all screwed up.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Jim Quinlan <jim2101024@gmail.com>
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4965/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The csum_partial implementation contain optimalizations for the MIPS R2
instruction set. This optimization is never enabled however because the
if directive uses the CPU_MIPSR2 constant which is not defined anywhere.
Use the CONFIG_CPU_MIPSR2 constant instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4971/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull watchdog updates from Wim Van Sebroeck:
"This contains:
- fixes and improvements
- devicetree bindings
- conversion to watchdog generic framework of the following drivers:
- booke_wdt
- bcm47xx_wdt.c
- at91sam9_wdt
- Removal of old STMP3xxx driver
- Addition of following new drivers:
- new driver for STMP3xxx and i.MX23/28
- Retu watchdog driver"
* git://www.linux-watchdog.org/linux-watchdog: (30 commits)
watchdog: sp805_wdt depends on ARM
watchdog: davinci_wdt: update to devm_* API
watchdog: davinci_wdt: use devm managed clk get
watchdog: at91rm9200: add DT support
watchdog: add timeout-sec property binding
watchdog: at91sam9_wdt: Convert to use the watchdog framework
watchdog: omap_wdt: Add option nowayout
watchdog: core: dt: add support for the timeout-sec dt property
watchdog: bcm47xx_wdt.c: add hard timer
watchdog: bcm47xx_wdt.c: rename wdt_time to timeout
watchdog: bcm47xx_wdt.c: rename ops methods
watchdog: bcm47xx_wdt.c: use platform device
watchdog: bcm47xx_wdt.c: convert to watchdog core api
watchdog: Convert BookE watchdog driver to watchdog infrastructure
watchdog: s3c2410_wdt: Use devm_* functions
watchdog: remove old STMP3xxx driver
watchdog: add new driver for STMP3xxx and i.MX23/28
rtc: stmp3xxx: add wdt-accessor function
watchdog: introduce retu_wdt driver
watchdog: intel_scu_watchdog: fix Kconfig dependency
...
Pull signal/compat fixes from Al Viro:
"Fixes for several regressions introduced in the last signal.git pile,
along with fixing bugs in truncate and ftruncate compat (on just about
anything biarch at least one of those two had been done wrong)."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
compat: restore timerfd settime and gettime compat syscalls
[regression] braino in "sparc: convert to ksignal"
fix compat truncate/ftruncate
switch lseek to COMPAT_SYSCALL_DEFINE
lseek() and truncate() on sparc really need sign extension
Pull MIPS updates from Ralf Baechle:
o Add basic support for the Mediatek/Ralink Wireless SoC family.
o The Qualcomm Atheros platform is extended by support for the new
QCA955X SoC series as well as a bunch of patches that get the code
ready for OF support.
o Lantiq and BCM47XX platform have a few improvements and bug fixes.
o MIPS has sent a few patches that get the kernel ready for the
upcoming microMIPS support.
o The rest of the series is made up of small bug fixes and cleanups
that relate to various parts of the MIPS code. The biggy in there is
a whitespace cleanup. After I was sent another set of whitespace
cleanup patches I decided it was the time to clean the whitespace
"issues" for once and and that touches many files below arch/mips/.
Fix up silly conflicts, mostly due to whitespace cleanups.
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
MIPS: remove broken conditional inside vpe loader code
MIPS: SMTC: fix implicit declaration of set_vi_handler
MIPS: early_printk: drop __init annotations
MIPS: Probe for and report hardware virtualization support.
MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
MIPS: ath79: add USB controller registration code for the QCA955X SoCs
MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
MIPS: ath79: add WMAC registration code for the QCA955X SoCs
MIPS: ath79: register UART for the QCA955X SoCs
MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
MIPS: ath79: add GPIO setup code for the QCA955X SoCs
MIPS: ath79: add IRQ handling code for the QCA955X SoCs
MIPS: ath79: add clock setup code for the QCA955X SoCs
MIPS: ath79: add SoC detection code for the QCA955X SoCs
MIPS: ath79: add early printk support for the QCA955X SoCs
MIPS: ath79: fix WMAC IRQ resource assignment
mips: reserve elfcorehdr
mips: Make sure kernel memory is in iomem
MIPS: ath79: use dynamically allocated USB platform devices
...
