linux_dsm_epyc7002/drivers/gpu/drm/omapdrm/dss/hdmi4.c

840 lines
17 KiB
C
Raw Normal View History

/*
* HDMI interface DSS driver for TI's OMAP4 family of SoCs.
* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
* Authors: Yong Zhi
* Mythri pk <mythripk@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define DSS_SUBSYS_NAME "HDMI"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/component.h>
#include <video/omapdss.h>
#include <sound/omap-hdmi-audio.h>
#include "hdmi4_core.h"
#include "dss.h"
#include "dss_features.h"
#include "hdmi.h"
static struct omap_hdmi hdmi;
static int hdmi_runtime_get(void)
{
int r;
DSSDBG("hdmi_runtime_get\n");
r = pm_runtime_get_sync(&hdmi.pdev->dev);
WARN_ON(r < 0);
OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled For DSS clock domain to transition from idle to active state. It's necessary to enable the optional clock DSS_FCLK before we enable the module using the MODULEMODE bits in the clock domain's CM_DSS_DSS_CLKCTRL register. This sequence was not followed correctly for the 'dss_hdmi' hwmod and it led to DSS clock domain not getting out of idle when pm_runtime_get_sync() was called for hdmi's platform device. Since the clock domain failed to change it's state to active, the hwmod code disables any clocks it had enabled before for this hwmod. This led to the clock 'dss_48mhz_clk' gettind disabled. When hdmi's runtime_resume() op is called, the call to dss_runtime_get() correctly enables the DSS clock domain this time. However, the clock 'dss_48mhz_clk' is needed for HDMI's PHY to function correctly. Since it was disabled previously, the driver fails when it tries to enable HDMI's PHY. Fix this for now by ensuring that dss_runtime_get() is called before we call pm_runtime_get_sync() for hdmi's platform device. A correct fix for later would be to modify the DSS related hwmod's mainclks, and also some changes in how opt clocks are handled in the DSS driver. This fixes the issue of HDMI not working when it's the default display. The issue is not seen if any other display is already enabled as the first display would have correctly enabled the DSS clockdomain. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-10 13:15:52 +07:00
if (r < 0)
return r;
OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled For DSS clock domain to transition from idle to active state. It's necessary to enable the optional clock DSS_FCLK before we enable the module using the MODULEMODE bits in the clock domain's CM_DSS_DSS_CLKCTRL register. This sequence was not followed correctly for the 'dss_hdmi' hwmod and it led to DSS clock domain not getting out of idle when pm_runtime_get_sync() was called for hdmi's platform device. Since the clock domain failed to change it's state to active, the hwmod code disables any clocks it had enabled before for this hwmod. This led to the clock 'dss_48mhz_clk' gettind disabled. When hdmi's runtime_resume() op is called, the call to dss_runtime_get() correctly enables the DSS clock domain this time. However, the clock 'dss_48mhz_clk' is needed for HDMI's PHY to function correctly. Since it was disabled previously, the driver fails when it tries to enable HDMI's PHY. Fix this for now by ensuring that dss_runtime_get() is called before we call pm_runtime_get_sync() for hdmi's platform device. A correct fix for later would be to modify the DSS related hwmod's mainclks, and also some changes in how opt clocks are handled in the DSS driver. This fixes the issue of HDMI not working when it's the default display. The issue is not seen if any other display is already enabled as the first display would have correctly enabled the DSS clockdomain. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-10 13:15:52 +07:00
return 0;
}
static void hdmi_runtime_put(void)
{
int r;
DSSDBG("hdmi_runtime_put\n");
r = pm_runtime_put_sync(&hdmi.pdev->dev);
WARN_ON(r < 0 && r != -ENOSYS);
}
static irqreturn_t hdmi_irq_handler(int irq, void *data)
{
struct hdmi_wp_data *wp = data;
u32 irqstatus;
irqstatus = hdmi_wp_get_irqstatus(wp);
hdmi_wp_set_irqstatus(wp, irqstatus);
if ((irqstatus & HDMI_IRQ_LINK_CONNECT) &&
irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
/*
* If we get both connect and disconnect interrupts at the same
* time, turn off the PHY, clear interrupts, and restart, which
* raises connect interrupt if a cable is connected, or nothing
* if cable is not connected.
*/
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
hdmi_wp_set_irqstatus(wp, HDMI_IRQ_LINK_CONNECT |
HDMI_IRQ_LINK_DISCONNECT);
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
} else if (irqstatus & HDMI_IRQ_LINK_CONNECT) {
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_TXON);
} else if (irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
}
return IRQ_HANDLED;
}
static int hdmi_init_regulator(void)
{
int r;
struct regulator *reg;
if (hdmi.vdda_reg != NULL)
return 0;
reg = devm_regulator_get(&hdmi.pdev->dev, "vdda");
if (IS_ERR(reg)) {
if (PTR_ERR(reg) != -EPROBE_DEFER)
DSSERR("can't get VDDA regulator\n");
return PTR_ERR(reg);
}
if (regulator_can_change_voltage(reg)) {
r = regulator_set_voltage(reg, 1800000, 1800000);
if (r) {
devm_regulator_put(reg);
DSSWARN("can't set the regulator voltage\n");
return r;
}
}
hdmi.vdda_reg = reg;
return 0;
}
static int hdmi_power_on_core(struct omap_dss_device *dssdev)
{
int r;
r = regulator_enable(hdmi.vdda_reg);
if (r)
return r;
r = hdmi_runtime_get();
if (r)
goto err_runtime_get;
/* Make selection of HDMI in DSS */
dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK);
hdmi.core_enabled = true;
return 0;
err_runtime_get:
regulator_disable(hdmi.vdda_reg);
return r;
}
static void hdmi_power_off_core(struct omap_dss_device *dssdev)
{
hdmi.core_enabled = false;
hdmi_runtime_put();
regulator_disable(hdmi.vdda_reg);
}
static int hdmi_power_on_full(struct omap_dss_device *dssdev)
{
int r;
struct omap_video_timings *p;
enum omap_channel channel = dssdev->dispc_channel;
struct hdmi_wp_data *wp = &hdmi.wp;
struct dss_pll_clock_info hdmi_cinfo = { 0 };
unsigned pc;
r = hdmi_power_on_core(dssdev);
if (r)
return r;
/* disable and clear irqs */
hdmi_wp_clear_irqenable(wp, 0xffffffff);
hdmi_wp_set_irqstatus(wp, 0xffffffff);
p = &hdmi.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
pc = p->pixelclock;
if (p->double_pixel)
pc *= 2;
hdmi_pll_compute(&hdmi.pll, pc, &hdmi_cinfo);
r = dss_pll_enable(&hdmi.pll.pll);
if (r) {
DSSERR("Failed to enable PLL\n");
goto err_pll_enable;
}
r = dss_pll_set_config(&hdmi.pll.pll, &hdmi_cinfo);
if (r) {
DSSERR("Failed to configure PLL\n");
goto err_pll_cfg;
}
r = hdmi_phy_configure(&hdmi.phy, hdmi_cinfo.clkdco,
hdmi_cinfo.clkout[0]);
if (r) {
DSSDBG("Failed to configure PHY\n");
goto err_phy_cfg;
}
r = hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
if (r)
goto err_phy_pwr;
hdmi4_configure(&hdmi.core, &hdmi.wp, &hdmi.cfg);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dss_mgr_set_timings(channel, p);
r = dss_mgr_enable(channel);
if (r)
goto err_mgr_enable;
r = hdmi_wp_video_start(&hdmi.wp);
if (r)
goto err_vid_enable;
hdmi_wp_set_irqenable(wp,
HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
return 0;
err_vid_enable:
dss_mgr_disable(channel);
err_mgr_enable:
hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
err_phy_pwr:
err_phy_cfg:
err_pll_cfg:
dss_pll_disable(&hdmi.pll.pll);
err_pll_enable:
hdmi_power_off_core(dssdev);
return -EIO;
}
static void hdmi_power_off_full(struct omap_dss_device *dssdev)
{
enum omap_channel channel = dssdev->dispc_channel;
hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
hdmi_wp_video_stop(&hdmi.wp);
dss_mgr_disable(channel);
hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
dss_pll_disable(&hdmi.pll.pll);
hdmi_power_off_core(dssdev);
}
static int hdmi_display_check_timing(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
if (!dispc_mgr_timings_ok(dssdev->dispc_channel, timings))
return -EINVAL;
return 0;
}
static void hdmi_display_set_timing(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
mutex_lock(&hdmi.lock);
hdmi.cfg.timings = *timings;
dispc_set_tv_pclk(timings->pixelclock);
mutex_unlock(&hdmi.lock);
}
static void hdmi_display_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
*timings = hdmi.cfg.timings;
}
static void hdmi_dump_regs(struct seq_file *s)
{
mutex_lock(&hdmi.lock);
if (hdmi_runtime_get()) {
mutex_unlock(&hdmi.lock);
return;
}
hdmi_wp_dump(&hdmi.wp, s);
hdmi_pll_dump(&hdmi.pll, s);
hdmi_phy_dump(&hdmi.phy, s);
hdmi4_core_dump(&hdmi.core, s);
hdmi_runtime_put();
mutex_unlock(&hdmi.lock);
}
static int read_edid(u8 *buf, int len)
{
int r;
mutex_lock(&hdmi.lock);
r = hdmi_runtime_get();
BUG_ON(r);
r = hdmi4_read_edid(&hdmi.core, buf, len);
hdmi_runtime_put();
mutex_unlock(&hdmi.lock);
return r;
}
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
static void hdmi_start_audio_stream(struct omap_hdmi *hd)
{
hdmi_wp_audio_enable(&hd->wp, true);
hdmi4_audio_start(&hd->core, &hd->wp);
}
static void hdmi_stop_audio_stream(struct omap_hdmi *hd)
{
hdmi4_audio_stop(&hd->core, &hd->wp);
hdmi_wp_audio_enable(&hd->wp, false);
}
static int hdmi_display_enable(struct omap_dss_device *dssdev)
{
struct omap_dss_device *out = &hdmi.output;
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
unsigned long flags;
int r = 0;
DSSDBG("ENTER hdmi_display_enable\n");
mutex_lock(&hdmi.lock);
if (!out->dispc_channel_connected) {
DSSERR("failed to enable display: no output/manager\n");
r = -ENODEV;
goto err0;
}
r = hdmi_power_on_full(dssdev);
if (r) {
DSSERR("failed to power on device\n");
goto err0;
}
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
if (hdmi.audio_configured) {
r = hdmi4_audio_config(&hdmi.core, &hdmi.wp, &hdmi.audio_config,
hdmi.cfg.timings.pixelclock);
if (r) {
DSSERR("Error restoring audio configuration: %d", r);
hdmi.audio_abort_cb(&hdmi.pdev->dev);
hdmi.audio_configured = false;
}
}
spin_lock_irqsave(&hdmi.audio_playing_lock, flags);
if (hdmi.audio_configured && hdmi.audio_playing)
hdmi_start_audio_stream(&hdmi);
hdmi.display_enabled = true;
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
spin_unlock_irqrestore(&hdmi.audio_playing_lock, flags);
mutex_unlock(&hdmi.lock);
return 0;
err0:
mutex_unlock(&hdmi.lock);
return r;
}
static void hdmi_display_disable(struct omap_dss_device *dssdev)
{
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
unsigned long flags;
DSSDBG("Enter hdmi_display_disable\n");
mutex_lock(&hdmi.lock);
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
spin_lock_irqsave(&hdmi.audio_playing_lock, flags);
hdmi_stop_audio_stream(&hdmi);
hdmi.display_enabled = false;
spin_unlock_irqrestore(&hdmi.audio_playing_lock, flags);
hdmi_power_off_full(dssdev);
mutex_unlock(&hdmi.lock);
}
static int hdmi_core_enable(struct omap_dss_device *dssdev)
{
int r = 0;
DSSDBG("ENTER omapdss_hdmi_core_enable\n");
mutex_lock(&hdmi.lock);
r = hdmi_power_on_core(dssdev);
if (r) {
DSSERR("failed to power on device\n");
goto err0;
}
mutex_unlock(&hdmi.lock);
return 0;
err0:
mutex_unlock(&hdmi.lock);
return r;
}
static void hdmi_core_disable(struct omap_dss_device *dssdev)
{
DSSDBG("Enter omapdss_hdmi_core_disable\n");
mutex_lock(&hdmi.lock);
hdmi_power_off_core(dssdev);
mutex_unlock(&hdmi.lock);
}
static int hdmi_connect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
enum omap_channel channel = dssdev->dispc_channel;
int r;
r = hdmi_init_regulator();
if (r)
return r;
r = dss_mgr_connect(channel, dssdev);
if (r)
return r;
r = omapdss_output_set_device(dssdev, dst);
if (r) {
DSSERR("failed to connect output to new device: %s\n",
dst->name);
dss_mgr_disconnect(channel, dssdev);
return r;
}
return 0;
}
static void hdmi_disconnect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
enum omap_channel channel = dssdev->dispc_channel;
WARN_ON(dst != dssdev->dst);
if (dst != dssdev->dst)
return;
omapdss_output_unset_device(dssdev);
dss_mgr_disconnect(channel, dssdev);
}
static int hdmi_read_edid(struct omap_dss_device *dssdev,
u8 *edid, int len)
{
bool need_enable;
int r;
need_enable = hdmi.core_enabled == false;
if (need_enable) {
r = hdmi_core_enable(dssdev);
if (r)
return r;
}
r = read_edid(edid, len);
if (need_enable)
hdmi_core_disable(dssdev);
return r;
}
static int hdmi_set_infoframe(struct omap_dss_device *dssdev,
const struct hdmi_avi_infoframe *avi)
{
hdmi.cfg.infoframe = *avi;
return 0;
}
static int hdmi_set_hdmi_mode(struct omap_dss_device *dssdev,
bool hdmi_mode)
{
hdmi.cfg.hdmi_dvi_mode = hdmi_mode ? HDMI_HDMI : HDMI_DVI;
return 0;
}
static const struct omapdss_hdmi_ops hdmi_ops = {
.connect = hdmi_connect,
.disconnect = hdmi_disconnect,
.enable = hdmi_display_enable,
.disable = hdmi_display_disable,
.check_timings = hdmi_display_check_timing,
.set_timings = hdmi_display_set_timing,
.get_timings = hdmi_display_get_timings,
.read_edid = hdmi_read_edid,
.set_infoframe = hdmi_set_infoframe,
.set_hdmi_mode = hdmi_set_hdmi_mode,
};
static void hdmi_init_output(struct platform_device *pdev)
{
struct omap_dss_device *out = &hdmi.output;
out->dev = &pdev->dev;
out->id = OMAP_DSS_OUTPUT_HDMI;
out->output_type = OMAP_DISPLAY_TYPE_HDMI;
out->name = "hdmi.0";
out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
out->ops.hdmi = &hdmi_ops;
out->owner = THIS_MODULE;
omapdss_register_output(out);
}
static void hdmi_uninit_output(struct platform_device *pdev)
{
struct omap_dss_device *out = &hdmi.output;
omapdss_unregister_output(out);
}
static int hdmi_probe_of(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct device_node *ep;
int r;
ep = omapdss_of_get_first_endpoint(node);
if (!ep)
return 0;
r = hdmi_parse_lanes_of(pdev, ep, &hdmi.phy);
if (r)
goto err;
of_node_put(ep);
return 0;
err:
of_node_put(ep);
return r;
}
/* Audio callbacks */
static int hdmi_audio_startup(struct device *dev,
void (*abort_cb)(struct device *dev))
{
struct omap_hdmi *hd = dev_get_drvdata(dev);
int ret = 0;
mutex_lock(&hd->lock);
if (!hdmi_mode_has_audio(&hd->cfg) || !hd->display_enabled) {
ret = -EPERM;
goto out;
}
hd->audio_abort_cb = abort_cb;
out:
mutex_unlock(&hd->lock);
return ret;
}
static int hdmi_audio_shutdown(struct device *dev)
{
struct omap_hdmi *hd = dev_get_drvdata(dev);
mutex_lock(&hd->lock);
hd->audio_abort_cb = NULL;
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
hd->audio_configured = false;
hd->audio_playing = false;
mutex_unlock(&hd->lock);
return 0;
}
static int hdmi_audio_start(struct device *dev)
{
struct omap_hdmi *hd = dev_get_drvdata(dev);
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
unsigned long flags;
WARN_ON(!hdmi_mode_has_audio(&hd->cfg));
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
spin_lock_irqsave(&hd->audio_playing_lock, flags);
if (hd->display_enabled)
hdmi_start_audio_stream(hd);
hd->audio_playing = true;
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
spin_unlock_irqrestore(&hd->audio_playing_lock, flags);
return 0;
}
static void hdmi_audio_stop(struct device *dev)
{
struct omap_hdmi *hd = dev_get_drvdata(dev);
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
unsigned long flags;
WARN_ON(!hdmi_mode_has_audio(&hd->cfg));
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
spin_lock_irqsave(&hd->audio_playing_lock, flags);
if (hd->display_enabled)
hdmi_stop_audio_stream(hd);
hd->audio_playing = false;
spin_unlock_irqrestore(&hd->audio_playing_lock, flags);
}
static int hdmi_audio_config(struct device *dev,
struct omap_dss_audio *dss_audio)
{
struct omap_hdmi *hd = dev_get_drvdata(dev);
int ret;
mutex_lock(&hd->lock);
if (!hdmi_mode_has_audio(&hd->cfg) || !hd->display_enabled) {
ret = -EPERM;
goto out;
}
ret = hdmi4_audio_config(&hd->core, &hd->wp, dss_audio,
hd->cfg.timings.pixelclock);
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
if (!ret) {
hd->audio_configured = true;
hd->audio_config = *dss_audio;
}
out:
mutex_unlock(&hd->lock);
return ret;
}
static const struct omap_hdmi_audio_ops hdmi_audio_ops = {
.audio_startup = hdmi_audio_startup,
.audio_shutdown = hdmi_audio_shutdown,
.audio_start = hdmi_audio_start,
.audio_stop = hdmi_audio_stop,
.audio_config = hdmi_audio_config,
};
static int hdmi_audio_register(struct device *dev)
{
struct omap_hdmi_audio_pdata pdata = {
.dev = dev,
.dss_version = omapdss_get_version(),
.audio_dma_addr = hdmi_wp_get_audio_dma_addr(&hdmi.wp),
.ops = &hdmi_audio_ops,
};
hdmi.audio_pdev = platform_device_register_data(
dev, "omap-hdmi-audio", PLATFORM_DEVID_AUTO,
&pdata, sizeof(pdata));
if (IS_ERR(hdmi.audio_pdev))
return PTR_ERR(hdmi.audio_pdev);
return 0;
}
/* HDMI HW IP initialisation */
static int hdmi4_bind(struct device *dev, struct device *master, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
int r;
int irq;
hdmi.pdev = pdev;
dev_set_drvdata(&pdev->dev, &hdmi);
mutex_init(&hdmi.lock);
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-28 21:21:46 +07:00
spin_lock_init(&hdmi.audio_playing_lock);
if (pdev->dev.of_node) {
r = hdmi_probe_of(pdev);
if (r)
return r;
}
r = hdmi_wp_init(pdev, &hdmi.wp);
if (r)
return r;
r = hdmi_pll_init(pdev, &hdmi.pll, &hdmi.wp);
if (r)
return r;
r = hdmi_phy_init(pdev, &hdmi.phy);
if (r)
goto err;
r = hdmi4_core_init(pdev, &hdmi.core);
if (r)
goto err;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
DSSERR("platform_get_irq failed\n");
r = -ENODEV;
goto err;
}
r = devm_request_threaded_irq(&pdev->dev, irq,
NULL, hdmi_irq_handler,
IRQF_ONESHOT, "OMAP HDMI", &hdmi.wp);
if (r) {
DSSERR("HDMI IRQ request failed\n");
goto err;
}
pm_runtime_enable(&pdev->dev);
hdmi_init_output(pdev);
r = hdmi_audio_register(&pdev->dev);
if (r) {
DSSERR("Registering HDMI audio failed\n");
hdmi_uninit_output(pdev);
pm_runtime_disable(&pdev->dev);
return r;
}
dss_debugfs_create_file("hdmi", hdmi_dump_regs);
return 0;
err:
hdmi_pll_uninit(&hdmi.pll);
return r;
}
static void hdmi4_unbind(struct device *dev, struct device *master, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
if (hdmi.audio_pdev)
platform_device_unregister(hdmi.audio_pdev);
hdmi_uninit_output(pdev);
hdmi_pll_uninit(&hdmi.pll);
pm_runtime_disable(&pdev->dev);
}
static const struct component_ops hdmi4_component_ops = {
.bind = hdmi4_bind,
.unbind = hdmi4_unbind,
};
static int hdmi4_probe(struct platform_device *pdev)
{
return component_add(&pdev->dev, &hdmi4_component_ops);
}
static int hdmi4_remove(struct platform_device *pdev)
{
component_del(&pdev->dev, &hdmi4_component_ops);
return 0;
}
static int hdmi_runtime_suspend(struct device *dev)
{
dispc_runtime_put();
return 0;
}
static int hdmi_runtime_resume(struct device *dev)
{
int r;
r = dispc_runtime_get();
if (r < 0)
return r;
return 0;
}
static const struct dev_pm_ops hdmi_pm_ops = {
.runtime_suspend = hdmi_runtime_suspend,
.runtime_resume = hdmi_runtime_resume,
};
static const struct of_device_id hdmi_of_match[] = {
{ .compatible = "ti,omap4-hdmi", },
{},
};
static struct platform_driver omapdss_hdmihw_driver = {
.probe = hdmi4_probe,
.remove = hdmi4_remove,
.driver = {
.name = "omapdss_hdmi",
.pm = &hdmi_pm_ops,
.of_match_table = hdmi_of_match,
.suppress_bind_attrs = true,
},
};
int __init hdmi4_init_platform_driver(void)
{
return platform_driver_register(&omapdss_hdmihw_driver);
}
void hdmi4_uninit_platform_driver(void)
{
platform_driver_unregister(&omapdss_hdmihw_driver);
}