linux_dsm_epyc7002/drivers/video/omap2/dss/hdmi.c

1001 lines
21 KiB
C
Raw Normal View History

/*
* hdmi.c
*
* HDMI interface DSS driver setting for TI's OMAP4 family of processor.
* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
* Authors: Yong Zhi
* Mythri pk <mythripk@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define DSS_SUBSYS_NAME "HDMI"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <video/omapdss.h>
#include "ti_hdmi.h"
#include "dss.h"
#include "dss_features.h"
#define HDMI_WP 0x0
#define HDMI_CORE_SYS 0x400
#define HDMI_CORE_AV 0x900
#define HDMI_PLLCTRL 0x200
#define HDMI_PHY 0x300
/* HDMI EDID Length move this */
#define HDMI_EDID_MAX_LENGTH 256
#define EDID_TIMING_DESCRIPTOR_SIZE 0x12
#define EDID_DESCRIPTOR_BLOCK0_ADDRESS 0x36
#define EDID_DESCRIPTOR_BLOCK1_ADDRESS 0x80
#define EDID_SIZE_BLOCK0_TIMING_DESCRIPTOR 4
#define EDID_SIZE_BLOCK1_TIMING_DESCRIPTOR 4
#define HDMI_DEFAULT_REGN 16
#define HDMI_DEFAULT_REGM2 1
static struct {
struct mutex lock;
struct platform_device *pdev;
struct hdmi_ip_data ip_data;
struct clk *sys_clk;
} hdmi;
/*
* Logic for the below structure :
* user enters the CEA or VESA timings by specifying the HDMI/DVI code.
* There is a correspondence between CEA/VESA timing and code, please
* refer to section 6.3 in HDMI 1.3 specification for timing code.
*
* In the below structure, cea_vesa_timings corresponds to all OMAP4
* supported CEA and VESA timing values.code_cea corresponds to the CEA
* code, It is used to get the timing from cea_vesa_timing array.Similarly
* with code_vesa. Code_index is used for back mapping, that is once EDID
* is read from the TV, EDID is parsed to find the timing values and then
* map it to corresponding CEA or VESA index.
*/
static const struct hdmi_config cea_timings[] = {
{
{ 640, 480, 25200, 96, 16, 48, 2, 10, 33,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
false, },
{ 1, HDMI_HDMI },
},
{
{ 720, 480, 27027, 62, 16, 60, 6, 9, 30,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
false, },
{ 2, HDMI_HDMI },
},
{
{ 1280, 720, 74250, 40, 110, 220, 5, 5, 20,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 4, HDMI_HDMI },
},
{
{ 1920, 540, 74250, 44, 88, 148, 5, 2, 15,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
true, },
{ 5, HDMI_HDMI },
},
{
{ 1440, 240, 27027, 124, 38, 114, 3, 4, 15,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
true, },
{ 6, HDMI_HDMI },
},
{
{ 1920, 1080, 148500, 44, 88, 148, 5, 4, 36,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 16, HDMI_HDMI },
},
{
{ 720, 576, 27000, 64, 12, 68, 5, 5, 39,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
false, },
{ 17, HDMI_HDMI },
},
{
{ 1280, 720, 74250, 40, 440, 220, 5, 5, 20,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 19, HDMI_HDMI },
},
{
{ 1920, 540, 74250, 44, 528, 148, 5, 2, 15,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
true, },
{ 20, HDMI_HDMI },
},
{
{ 1440, 288, 27000, 126, 24, 138, 3, 2, 19,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
true, },
{ 21, HDMI_HDMI },
},
{
{ 1440, 576, 54000, 128, 24, 136, 5, 5, 39,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
false, },
{ 29, HDMI_HDMI },
},
{
{ 1920, 1080, 148500, 44, 528, 148, 5, 4, 36,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 31, HDMI_HDMI },
},
{
{ 1920, 1080, 74250, 44, 638, 148, 5, 4, 36,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 32, HDMI_HDMI },
},
{
{ 2880, 480, 108108, 248, 64, 240, 6, 9, 30,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
false, },
{ 35, HDMI_HDMI },
},
{
{ 2880, 576, 108000, 256, 48, 272, 5, 5, 39,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
false, },
{ 37, HDMI_HDMI },
},
};
static const struct hdmi_config vesa_timings[] = {
/* VESA From Here */
{
{ 640, 480, 25175, 96, 16, 48, 2, 11, 31,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
false, },
{ 4, HDMI_DVI },
},
{
{ 800, 600, 40000, 128, 40, 88, 4, 1, 23,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 9, HDMI_DVI },
},
{
{ 848, 480, 33750, 112, 16, 112, 8, 6, 23,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 0xE, HDMI_DVI },
},
{
{ 1280, 768, 79500, 128, 64, 192, 7, 3, 20,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
false, },
{ 0x17, HDMI_DVI },
},
{
{ 1280, 800, 83500, 128, 72, 200, 6, 3, 22,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
false, },
{ 0x1C, HDMI_DVI },
},
{
{ 1360, 768, 85500, 112, 64, 256, 6, 3, 18,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 0x27, HDMI_DVI },
},
{
{ 1280, 960, 108000, 112, 96, 312, 3, 1, 36,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 0x20, HDMI_DVI },
},
{
{ 1280, 1024, 108000, 112, 48, 248, 3, 1, 38,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 0x23, HDMI_DVI },
},
{
{ 1024, 768, 65000, 136, 24, 160, 6, 3, 29,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
false, },
{ 0x10, HDMI_DVI },
},
{
{ 1400, 1050, 121750, 144, 88, 232, 4, 3, 32,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
false, },
{ 0x2A, HDMI_DVI },
},
{
{ 1440, 900, 106500, 152, 80, 232, 6, 3, 25,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
false, },
{ 0x2F, HDMI_DVI },
},
{
{ 1680, 1050, 146250, 176 , 104, 280, 6, 3, 30,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
false, },
{ 0x3A, HDMI_DVI },
},
{
{ 1366, 768, 85500, 143, 70, 213, 3, 3, 24,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 0x51, HDMI_DVI },
},
{
{ 1920, 1080, 148500, 44, 148, 80, 5, 4, 36,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 0x52, HDMI_DVI },
},
{
{ 1280, 768, 68250, 32, 48, 80, 7, 3, 12,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 0x16, HDMI_DVI },
},
{
{ 1400, 1050, 101000, 32, 48, 80, 4, 3, 23,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 0x29, HDMI_DVI },
},
{
{ 1680, 1050, 119000, 32, 48, 80, 6, 3, 21,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 0x39, HDMI_DVI },
},
{
{ 1280, 800, 79500, 32, 48, 80, 6, 3, 14,
OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 0x1B, HDMI_DVI },
},
{
{ 1280, 720, 74250, 40, 110, 220, 5, 5, 20,
OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
false, },
{ 0x55, HDMI_DVI },
},
};
static int hdmi_runtime_get(void)
{
int r;
DSSDBG("hdmi_runtime_get\n");
r = pm_runtime_get_sync(&hdmi.pdev->dev);
WARN_ON(r < 0);
OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled For DSS clock domain to transition from idle to active state. It's necessary to enable the optional clock DSS_FCLK before we enable the module using the MODULEMODE bits in the clock domain's CM_DSS_DSS_CLKCTRL register. This sequence was not followed correctly for the 'dss_hdmi' hwmod and it led to DSS clock domain not getting out of idle when pm_runtime_get_sync() was called for hdmi's platform device. Since the clock domain failed to change it's state to active, the hwmod code disables any clocks it had enabled before for this hwmod. This led to the clock 'dss_48mhz_clk' gettind disabled. When hdmi's runtime_resume() op is called, the call to dss_runtime_get() correctly enables the DSS clock domain this time. However, the clock 'dss_48mhz_clk' is needed for HDMI's PHY to function correctly. Since it was disabled previously, the driver fails when it tries to enable HDMI's PHY. Fix this for now by ensuring that dss_runtime_get() is called before we call pm_runtime_get_sync() for hdmi's platform device. A correct fix for later would be to modify the DSS related hwmod's mainclks, and also some changes in how opt clocks are handled in the DSS driver. This fixes the issue of HDMI not working when it's the default display. The issue is not seen if any other display is already enabled as the first display would have correctly enabled the DSS clockdomain. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-10 13:15:52 +07:00
if (r < 0)
return r;
OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled For DSS clock domain to transition from idle to active state. It's necessary to enable the optional clock DSS_FCLK before we enable the module using the MODULEMODE bits in the clock domain's CM_DSS_DSS_CLKCTRL register. This sequence was not followed correctly for the 'dss_hdmi' hwmod and it led to DSS clock domain not getting out of idle when pm_runtime_get_sync() was called for hdmi's platform device. Since the clock domain failed to change it's state to active, the hwmod code disables any clocks it had enabled before for this hwmod. This led to the clock 'dss_48mhz_clk' gettind disabled. When hdmi's runtime_resume() op is called, the call to dss_runtime_get() correctly enables the DSS clock domain this time. However, the clock 'dss_48mhz_clk' is needed for HDMI's PHY to function correctly. Since it was disabled previously, the driver fails when it tries to enable HDMI's PHY. Fix this for now by ensuring that dss_runtime_get() is called before we call pm_runtime_get_sync() for hdmi's platform device. A correct fix for later would be to modify the DSS related hwmod's mainclks, and also some changes in how opt clocks are handled in the DSS driver. This fixes the issue of HDMI not working when it's the default display. The issue is not seen if any other display is already enabled as the first display would have correctly enabled the DSS clockdomain. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-10 13:15:52 +07:00
return 0;
}
static void hdmi_runtime_put(void)
{
int r;
DSSDBG("hdmi_runtime_put\n");
r = pm_runtime_put_sync(&hdmi.pdev->dev);
WARN_ON(r < 0 && r != -ENOSYS);
}
static int __init hdmi_init_display(struct omap_dss_device *dssdev)
{
DSSDBG("init_display\n");
dss_init_hdmi_ip_ops(&hdmi.ip_data);
return 0;
}
static const struct hdmi_config *hdmi_find_timing(
const struct hdmi_config *timings_arr,
int len)
{
int i;
for (i = 0; i < len; i++) {
if (timings_arr[i].cm.code == hdmi.ip_data.cfg.cm.code)
return &timings_arr[i];
}
return NULL;
}
static const struct hdmi_config *hdmi_get_timings(void)
{
const struct hdmi_config *arr;
int len;
if (hdmi.ip_data.cfg.cm.mode == HDMI_DVI) {
arr = vesa_timings;
len = ARRAY_SIZE(vesa_timings);
} else {
arr = cea_timings;
len = ARRAY_SIZE(cea_timings);
}
return hdmi_find_timing(arr, len);
}
static bool hdmi_timings_compare(struct omap_video_timings *timing1,
const struct omap_video_timings *timing2)
{
int timing1_vsync, timing1_hsync, timing2_vsync, timing2_hsync;
if ((timing2->pixel_clock == timing1->pixel_clock) &&
(timing2->x_res == timing1->x_res) &&
(timing2->y_res == timing1->y_res)) {
timing2_hsync = timing2->hfp + timing2->hsw + timing2->hbp;
timing1_hsync = timing1->hfp + timing1->hsw + timing1->hbp;
timing2_vsync = timing2->vfp + timing2->vsw + timing2->vbp;
timing1_vsync = timing2->vfp + timing2->vsw + timing2->vbp;
DSSDBG("timing1_hsync = %d timing1_vsync = %d"\
"timing2_hsync = %d timing2_vsync = %d\n",
timing1_hsync, timing1_vsync,
timing2_hsync, timing2_vsync);
if ((timing1_hsync == timing2_hsync) &&
(timing1_vsync == timing2_vsync)) {
return true;
}
}
return false;
}
static struct hdmi_cm hdmi_get_code(struct omap_video_timings *timing)
{
int i;
struct hdmi_cm cm = {-1};
DSSDBG("hdmi_get_code\n");
for (i = 0; i < ARRAY_SIZE(cea_timings); i++) {
if (hdmi_timings_compare(timing, &cea_timings[i].timings)) {
cm = cea_timings[i].cm;
goto end;
}
}
for (i = 0; i < ARRAY_SIZE(vesa_timings); i++) {
if (hdmi_timings_compare(timing, &vesa_timings[i].timings)) {
cm = vesa_timings[i].cm;
goto end;
}
}
end: return cm;
}
unsigned long hdmi_get_pixel_clock(void)
{
/* HDMI Pixel Clock in Mhz */
return hdmi.ip_data.cfg.timings.pixel_clock * 1000;
}
static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,
struct hdmi_pll_info *pi)
{
unsigned long clkin, refclk;
u32 mf;
clkin = clk_get_rate(hdmi.sys_clk) / 10000;
/*
* Input clock is predivided by N + 1
* out put of which is reference clk
*/
if (dssdev->clocks.hdmi.regn == 0)
pi->regn = HDMI_DEFAULT_REGN;
else
pi->regn = dssdev->clocks.hdmi.regn;
refclk = clkin / pi->regn;
if (dssdev->clocks.hdmi.regm2 == 0)
pi->regm2 = HDMI_DEFAULT_REGM2;
else
pi->regm2 = dssdev->clocks.hdmi.regm2;
/*
* multiplier is pixel_clk/ref_clk
* Multiplying by 100 to avoid fractional part removal
*/
pi->regm = phy * pi->regm2 / refclk;
/*
* fractional multiplier is remainder of the difference between
* multiplier and actual phy(required pixel clock thus should be
* multiplied by 2^18(262144) divided by the reference clock
*/
mf = (phy - pi->regm / pi->regm2 * refclk) * 262144;
pi->regmf = pi->regm2 * mf / refclk;
/*
* Dcofreq should be set to 1 if required pixel clock
* is greater than 1000MHz
*/
pi->dcofreq = phy > 1000 * 100;
pi->regsd = ((pi->regm * clkin / 10) / (pi->regn * 250) + 5) / 10;
/* Set the reference clock to sysclk reference */
pi->refsel = HDMI_REFSEL_SYSCLK;
DSSDBG("M = %d Mf = %d\n", pi->regm, pi->regmf);
DSSDBG("range = %d sd = %d\n", pi->dcofreq, pi->regsd);
}
static int hdmi_power_on(struct omap_dss_device *dssdev)
{
int r;
struct omap_video_timings *p;
unsigned long phy;
r = hdmi_runtime_get();
if (r)
return r;
dss_mgr_disable(dssdev->manager);
p = &hdmi.ip_data.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
phy = p->pixel_clock;
hdmi_compute_pll(dssdev, phy, &hdmi.ip_data.pll_data);
hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
/* config the PLL and PHY hdmi_set_pll_pwrfirst */
r = hdmi.ip_data.ops->pll_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to lock PLL\n");
goto err;
}
r = hdmi.ip_data.ops->phy_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err_phy_enable;
}
hdmi.ip_data.ops->video_configure(&hdmi.ip_data);
/* Make selection of HDMI in DSS */
dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK);
/* Select the dispc clock source as PRCM clock, to ensure that it is not
* DSI PLL source as the clock selected by DSI PLL might not be
* sufficient for the resolution selected / that can be changed
* dynamically by user. This can be moved to single location , say
* Boardfile.
*/
dss_select_dispc_clk_source(dssdev->clocks.dispc.dispc_fclk_src);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dss_mgr_set_timings(dssdev->manager, p);
r = hdmi.ip_data.ops->video_enable(&hdmi.ip_data);
if (r)
goto err_vid_enable;
r = dss_mgr_enable(dssdev->manager);
if (r)
goto err_mgr_enable;
return 0;
err_mgr_enable:
hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
err_vid_enable:
hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
err_phy_enable:
hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
err:
hdmi_runtime_put();
return -EIO;
}
static void hdmi_power_off(struct omap_dss_device *dssdev)
{
dss_mgr_disable(dssdev->manager);
hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
hdmi_runtime_put();
}
int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct hdmi_cm cm;
cm = hdmi_get_code(timings);
if (cm.code == -1) {
return -EINVAL;
}
return 0;
}
void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct hdmi_cm cm;
const struct hdmi_config *t;
mutex_lock(&hdmi.lock);
cm = hdmi_get_code(timings);
hdmi.ip_data.cfg.cm = cm;
t = hdmi_get_timings();
if (t != NULL)
hdmi.ip_data.cfg = *t;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
int r;
hdmi_power_off(dssdev);
r = hdmi_power_on(dssdev);
if (r)
DSSERR("failed to power on device\n");
} else {
dss_mgr_set_timings(dssdev->manager, &t->timings);
}
mutex_unlock(&hdmi.lock);
}
static void hdmi_dump_regs(struct seq_file *s)
{
mutex_lock(&hdmi.lock);
if (hdmi_runtime_get())
return;
hdmi.ip_data.ops->dump_wrapper(&hdmi.ip_data, s);
hdmi.ip_data.ops->dump_pll(&hdmi.ip_data, s);
hdmi.ip_data.ops->dump_phy(&hdmi.ip_data, s);
hdmi.ip_data.ops->dump_core(&hdmi.ip_data, s);
hdmi_runtime_put();
mutex_unlock(&hdmi.lock);
}
int omapdss_hdmi_read_edid(u8 *buf, int len)
{
int r;
mutex_lock(&hdmi.lock);
r = hdmi_runtime_get();
BUG_ON(r);
r = hdmi.ip_data.ops->read_edid(&hdmi.ip_data, buf, len);
hdmi_runtime_put();
mutex_unlock(&hdmi.lock);
return r;
}
bool omapdss_hdmi_detect(void)
{
int r;
mutex_lock(&hdmi.lock);
r = hdmi_runtime_get();
BUG_ON(r);
r = hdmi.ip_data.ops->detect(&hdmi.ip_data);
hdmi_runtime_put();
mutex_unlock(&hdmi.lock);
return r == 1;
}
int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev)
{
struct omap_dss_hdmi_data *priv = dssdev->data;
int r = 0;
DSSDBG("ENTER hdmi_display_enable\n");
mutex_lock(&hdmi.lock);
if (dssdev->manager == NULL) {
DSSERR("failed to enable display: no manager\n");
r = -ENODEV;
goto err0;
}
hdmi.ip_data.hpd_gpio = priv->hpd_gpio;
r = omap_dss_start_device(dssdev);
if (r) {
DSSERR("failed to start device\n");
goto err0;
}
if (dssdev->platform_enable) {
r = dssdev->platform_enable(dssdev);
if (r) {
DSSERR("failed to enable GPIO's\n");
goto err1;
}
}
r = hdmi_power_on(dssdev);
if (r) {
DSSERR("failed to power on device\n");
goto err2;
}
mutex_unlock(&hdmi.lock);
return 0;
err2:
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
err1:
omap_dss_stop_device(dssdev);
err0:
mutex_unlock(&hdmi.lock);
return r;
}
void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev)
{
DSSDBG("Enter hdmi_display_disable\n");
mutex_lock(&hdmi.lock);
hdmi_power_off(dssdev);
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
omap_dss_stop_device(dssdev);
mutex_unlock(&hdmi.lock);
}
static int hdmi_get_clocks(struct platform_device *pdev)
{
struct clk *clk;
clk = clk_get(&pdev->dev, "sys_clk");
if (IS_ERR(clk)) {
DSSERR("can't get sys_clk\n");
return PTR_ERR(clk);
}
hdmi.sys_clk = clk;
return 0;
}
static void hdmi_put_clocks(void)
{
if (hdmi.sys_clk)
clk_put(hdmi.sys_clk);
}
#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
int hdmi_compute_acr(u32 sample_freq, u32 *n, u32 *cts)
{
u32 deep_color;
bool deep_color_correct = false;
u32 pclk = hdmi.ip_data.cfg.timings.pixel_clock;
if (n == NULL || cts == NULL)
return -EINVAL;
/* TODO: When implemented, query deep color mode here. */
deep_color = 100;
/*
* When using deep color, the default N value (as in the HDMI
* specification) yields to an non-integer CTS. Hence, we
* modify it while keeping the restrictions described in
* section 7.2.1 of the HDMI 1.4a specification.
*/
switch (sample_freq) {
case 32000:
case 48000:
case 96000:
case 192000:
if (deep_color == 125)
if (pclk == 27027 || pclk == 74250)
deep_color_correct = true;
if (deep_color == 150)
if (pclk == 27027)
deep_color_correct = true;
break;
case 44100:
case 88200:
case 176400:
if (deep_color == 125)
if (pclk == 27027)
deep_color_correct = true;
break;
default:
return -EINVAL;
}
if (deep_color_correct) {
switch (sample_freq) {
case 32000:
*n = 8192;
break;
case 44100:
*n = 12544;
break;
case 48000:
*n = 8192;
break;
case 88200:
*n = 25088;
break;
case 96000:
*n = 16384;
break;
case 176400:
*n = 50176;
break;
case 192000:
*n = 32768;
break;
default:
return -EINVAL;
}
} else {
switch (sample_freq) {
case 32000:
*n = 4096;
break;
case 44100:
*n = 6272;
break;
case 48000:
*n = 6144;
break;
case 88200:
*n = 12544;
break;
case 96000:
*n = 12288;
break;
case 176400:
*n = 25088;
break;
case 192000:
*n = 24576;
break;
default:
return -EINVAL;
}
}
/* Calculate CTS. See HDMI 1.3a or 1.4a specifications */
*cts = pclk * (*n / 128) * deep_color / (sample_freq / 10);
return 0;
}
int hdmi_audio_enable(void)
{
DSSDBG("audio_enable\n");
return hdmi.ip_data.ops->audio_enable(&hdmi.ip_data);
}
void hdmi_audio_disable(void)
{
DSSDBG("audio_disable\n");
hdmi.ip_data.ops->audio_disable(&hdmi.ip_data);
}
int hdmi_audio_start(void)
{
DSSDBG("audio_start\n");
return hdmi.ip_data.ops->audio_start(&hdmi.ip_data);
}
void hdmi_audio_stop(void)
{
DSSDBG("audio_stop\n");
hdmi.ip_data.ops->audio_stop(&hdmi.ip_data);
}
bool hdmi_mode_has_audio(void)
{
if (hdmi.ip_data.cfg.cm.mode == HDMI_HDMI)
return true;
else
return false;
}
int hdmi_audio_config(struct omap_dss_audio *audio)
{
return hdmi.ip_data.ops->audio_config(&hdmi.ip_data, audio);
}
#endif
static void __init hdmi_probe_pdata(struct platform_device *pdev)
{
struct omap_dss_board_info *pdata = pdev->dev.platform_data;
int r, i;
for (i = 0; i < pdata->num_devices; ++i) {
struct omap_dss_device *dssdev = pdata->devices[i];
if (dssdev->type != OMAP_DISPLAY_TYPE_HDMI)
continue;
r = hdmi_init_display(dssdev);
if (r) {
DSSERR("device %s init failed: %d\n", dssdev->name, r);
continue;
}
r = omap_dss_register_device(dssdev, &pdev->dev, i);
if (r)
DSSERR("device %s register failed: %d\n",
dssdev->name, r);
}
}
/* HDMI HW IP initialisation */
static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
{
struct resource *hdmi_mem;
int r;
hdmi.pdev = pdev;
mutex_init(&hdmi.lock);
hdmi_mem = platform_get_resource(hdmi.pdev, IORESOURCE_MEM, 0);
if (!hdmi_mem) {
DSSERR("can't get IORESOURCE_MEM HDMI\n");
return -EINVAL;
}
/* Base address taken from platform */
hdmi.ip_data.base_wp = ioremap(hdmi_mem->start,
resource_size(hdmi_mem));
if (!hdmi.ip_data.base_wp) {
DSSERR("can't ioremap WP\n");
return -ENOMEM;
}
r = hdmi_get_clocks(pdev);
if (r) {
iounmap(hdmi.ip_data.base_wp);
return r;
}
pm_runtime_enable(&pdev->dev);
hdmi.ip_data.core_sys_offset = HDMI_CORE_SYS;
hdmi.ip_data.core_av_offset = HDMI_CORE_AV;
hdmi.ip_data.pll_offset = HDMI_PLLCTRL;
hdmi.ip_data.phy_offset = HDMI_PHY;
mutex_init(&hdmi.ip_data.lock);
hdmi_panel_init();
dss_debugfs_create_file("hdmi", hdmi_dump_regs);
hdmi_probe_pdata(pdev);
return 0;
}
static int __exit omapdss_hdmihw_remove(struct platform_device *pdev)
{
omap_dss_unregister_child_devices(&pdev->dev);
hdmi_panel_exit();
pm_runtime_disable(&pdev->dev);
hdmi_put_clocks();
iounmap(hdmi.ip_data.base_wp);
return 0;
}
static int hdmi_runtime_suspend(struct device *dev)
{
clk_disable_unprepare(hdmi.sys_clk);
dispc_runtime_put();
return 0;
}
static int hdmi_runtime_resume(struct device *dev)
{
int r;
r = dispc_runtime_get();
if (r < 0)
return r;
clk_prepare_enable(hdmi.sys_clk);
return 0;
}
static const struct dev_pm_ops hdmi_pm_ops = {
.runtime_suspend = hdmi_runtime_suspend,
.runtime_resume = hdmi_runtime_resume,
};
static struct platform_driver omapdss_hdmihw_driver = {
.remove = __exit_p(omapdss_hdmihw_remove),
.driver = {
.name = "omapdss_hdmi",
.owner = THIS_MODULE,
.pm = &hdmi_pm_ops,
},
};
int __init hdmi_init_platform_driver(void)
{
return platform_driver_probe(&omapdss_hdmihw_driver, omapdss_hdmihw_probe);
}
void __exit hdmi_uninit_platform_driver(void)
{
platform_driver_unregister(&omapdss_hdmihw_driver);
}