linux_dsm_epyc7002/drivers/gpu/drm/i915/i915_gem.c

4043 lines
101 KiB
C
Raw Normal View History

/*
* Copyright © 2008 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*
*/
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
#include <linux/shmem_fs.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/pci.h>
static __must_check int i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj);
static void i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj);
static void i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj);
static __must_check int i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
unsigned alignment,
bool map_and_fenceable);
static int i915_gem_phys_pwrite(struct drm_device *dev,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_pwrite *args,
struct drm_file *file);
static void i915_gem_free_object_tail(struct drm_i915_gem_object *obj);
static void i915_gem_write_fence(struct drm_device *dev, int reg,
struct drm_i915_gem_object *obj);
static void i915_gem_object_update_fence(struct drm_i915_gem_object *obj,
struct drm_i915_fence_reg *fence,
bool enable);
static int i915_gem_inactive_shrink(struct shrinker *shrinker,
struct shrink_control *sc);
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 19:57:31 +07:00
static void i915_gem_object_truncate(struct drm_i915_gem_object *obj);
static inline void i915_gem_object_fence_lost(struct drm_i915_gem_object *obj)
{
if (obj->tiling_mode)
i915_gem_release_mmap(obj);
/* As we do not have an associated fence register, we will force
* a tiling change if we ever need to acquire one.
*/
obj->tiling_changed = false;
obj->fence_reg = I915_FENCE_REG_NONE;
}
/* some bookkeeping */
static void i915_gem_info_add_obj(struct drm_i915_private *dev_priv,
size_t size)
{
dev_priv->mm.object_count++;
dev_priv->mm.object_memory += size;
}
static void i915_gem_info_remove_obj(struct drm_i915_private *dev_priv,
size_t size)
{
dev_priv->mm.object_count--;
dev_priv->mm.object_memory -= size;
}
static int
i915_gem_wait_for_error(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct completion *x = &dev_priv->error_completion;
unsigned long flags;
int ret;
if (!atomic_read(&dev_priv->mm.wedged))
return 0;
ret = wait_for_completion_interruptible(x);
if (ret)
return ret;
if (atomic_read(&dev_priv->mm.wedged)) {
/* GPU is hung, bump the completion count to account for
* the token we just consumed so that we never hit zero and
* end up waiting upon a subsequent completion event that
* will never happen.
*/
spin_lock_irqsave(&x->wait.lock, flags);
x->done++;
spin_unlock_irqrestore(&x->wait.lock, flags);
}
return 0;
}
int i915_mutex_lock_interruptible(struct drm_device *dev)
{
int ret;
ret = i915_gem_wait_for_error(dev);
if (ret)
return ret;
ret = mutex_lock_interruptible(&dev->struct_mutex);
if (ret)
return ret;
WARN_ON(i915_verify_lists(dev));
return 0;
}
static inline bool
i915_gem_object_is_inactive(struct drm_i915_gem_object *obj)
{
return obj->gtt_space && !obj->active && obj->pin_count == 0;
}
int
i915_gem_init_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_init *args = data;
if (args->gtt_start >= args->gtt_end ||
(args->gtt_end | args->gtt_start) & (PAGE_SIZE - 1))
return -EINVAL;
/* GEM with user mode setting was never supported on ilk and later. */
if (INTEL_INFO(dev)->gen >= 5)
return -ENODEV;
mutex_lock(&dev->struct_mutex);
i915_gem_init_global_gtt(dev, args->gtt_start,
args->gtt_end, args->gtt_end);
mutex_unlock(&dev->struct_mutex);
return 0;
}
int
i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_get_aperture *args = data;
struct drm_i915_gem_object *obj;
size_t pinned;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
pinned = 0;
mutex_lock(&dev->struct_mutex);
list_for_each_entry(obj, &dev_priv->mm.pinned_list, mm_list)
pinned += obj->gtt_space->size;
mutex_unlock(&dev->struct_mutex);
args->aper_size = dev_priv->mm.gtt_total;
args->aper_available_size = args->aper_size - pinned;
return 0;
}
static int
i915_gem_create(struct drm_file *file,
struct drm_device *dev,
uint64_t size,
uint32_t *handle_p)
{
struct drm_i915_gem_object *obj;
int ret;
u32 handle;
size = roundup(size, PAGE_SIZE);
if (size == 0)
return -EINVAL;
/* Allocate the new object */
obj = i915_gem_alloc_object(dev, size);
if (obj == NULL)
return -ENOMEM;
ret = drm_gem_handle_create(file, &obj->base, &handle);
if (ret) {
drm_gem_object_release(&obj->base);
i915_gem_info_remove_obj(dev->dev_private, obj->base.size);
kfree(obj);
return ret;
}
/* drop reference from allocate - handle holds it now */
drm_gem_object_unreference(&obj->base);
trace_i915_gem_object_create(obj);
*handle_p = handle;
return 0;
}
int
i915_gem_dumb_create(struct drm_file *file,
struct drm_device *dev,
struct drm_mode_create_dumb *args)
{
/* have to work out size/pitch and return them */
args->pitch = ALIGN(args->width * ((args->bpp + 7) / 8), 64);
args->size = args->pitch * args->height;
return i915_gem_create(file, dev,
args->size, &args->handle);
}
int i915_gem_dumb_destroy(struct drm_file *file,
struct drm_device *dev,
uint32_t handle)
{
return drm_gem_handle_delete(file, handle);
}
/**
* Creates a new mm object and returns a handle to it.
*/
int
i915_gem_create_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_create *args = data;
return i915_gem_create(file, dev,
args->size, &args->handle);
}
static int i915_gem_object_needs_bit17_swizzle(struct drm_i915_gem_object *obj)
{
drm_i915_private_t *dev_priv = obj->base.dev->dev_private;
return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 &&
obj->tiling_mode != I915_TILING_NONE;
}
static inline int
__copy_to_user_swizzled(char __user *cpu_vaddr,
const char *gpu_vaddr, int gpu_offset,
int length)
{
int ret, cpu_offset = 0;
while (length > 0) {
int cacheline_end = ALIGN(gpu_offset + 1, 64);
int this_length = min(cacheline_end - gpu_offset, length);
int swizzled_gpu_offset = gpu_offset ^ 64;
ret = __copy_to_user(cpu_vaddr + cpu_offset,
gpu_vaddr + swizzled_gpu_offset,
this_length);
if (ret)
return ret + length;
cpu_offset += this_length;
gpu_offset += this_length;
length -= this_length;
}
return 0;
}
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 19:57:31 +07:00
static inline int
__copy_from_user_swizzled(char __user *gpu_vaddr, int gpu_offset,
const char *cpu_vaddr,
int length)
{
int ret, cpu_offset = 0;
while (length > 0) {
int cacheline_end = ALIGN(gpu_offset + 1, 64);
int this_length = min(cacheline_end - gpu_offset, length);
int swizzled_gpu_offset = gpu_offset ^ 64;
ret = __copy_from_user(gpu_vaddr + swizzled_gpu_offset,
cpu_vaddr + cpu_offset,
this_length);
if (ret)
return ret + length;
cpu_offset += this_length;
gpu_offset += this_length;
length -= this_length;
}
return 0;
}
/* Per-page copy function for the shmem pread fastpath.
* Flushes invalid cachelines before reading the target if
* needs_clflush is set. */
static int
shmem_pread_fast(struct page *page, int shmem_page_offset, int page_length,
char __user *user_data,
bool page_do_bit17_swizzling, bool needs_clflush)
{
char *vaddr;
int ret;
if (unlikely(page_do_bit17_swizzling))
return -EINVAL;
vaddr = kmap_atomic(page);
if (needs_clflush)
drm_clflush_virt_range(vaddr + shmem_page_offset,
page_length);
ret = __copy_to_user_inatomic(user_data,
vaddr + shmem_page_offset,
page_length);
kunmap_atomic(vaddr);
return ret;
}
static void
shmem_clflush_swizzled_range(char *addr, unsigned long length,
bool swizzled)
{
if (unlikely(swizzled)) {
unsigned long start = (unsigned long) addr;
unsigned long end = (unsigned long) addr + length;
/* For swizzling simply ensure that we always flush both
* channels. Lame, but simple and it works. Swizzled
* pwrite/pread is far from a hotpath - current userspace
* doesn't use it at all. */
start = round_down(start, 128);
end = round_up(end, 128);
drm_clflush_virt_range((void *)start, end - start);
} else {
drm_clflush_virt_range(addr, length);
}
}
/* Only difference to the fast-path function is that this can handle bit17
* and uses non-atomic copy and kmap functions. */
static int
shmem_pread_slow(struct page *page, int shmem_page_offset, int page_length,
char __user *user_data,
bool page_do_bit17_swizzling, bool needs_clflush)
{
char *vaddr;
int ret;
vaddr = kmap(page);
if (needs_clflush)
shmem_clflush_swizzled_range(vaddr + shmem_page_offset,
page_length,
page_do_bit17_swizzling);
if (page_do_bit17_swizzling)
ret = __copy_to_user_swizzled(user_data,
vaddr, shmem_page_offset,
page_length);
else
ret = __copy_to_user(user_data,
vaddr + shmem_page_offset,
page_length);
kunmap(page);
return ret;
}
static int
i915_gem_shmem_pread(struct drm_device *dev,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_pread *args,
struct drm_file *file)
{
struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
char __user *user_data;
ssize_t remain;
loff_t offset;
int shmem_page_offset, page_length, ret = 0;
int obj_do_bit17_swizzling, page_do_bit17_swizzling;
int hit_slowpath = 0;
int prefaulted = 0;
int needs_clflush = 0;
int release_page;
user_data = (char __user *) (uintptr_t) args->data_ptr;
remain = args->size;
obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
if (!(obj->base.read_domains & I915_GEM_DOMAIN_CPU)) {
/* If we're not in the cpu read domain, set ourself into the gtt
* read domain and manually flush cachelines (if required). This
* optimizes for the case when the gpu will dirty the data
* anyway again before the next pread happens. */
if (obj->cache_level == I915_CACHE_NONE)
needs_clflush = 1;
ret = i915_gem_object_set_to_gtt_domain(obj, false);
if (ret)
return ret;
}
offset = args->offset;
while (remain > 0) {
struct page *page;
/* Operation in this page
*
* shmem_page_offset = offset within page in shmem file
* page_length = bytes to copy for this page
*/
shmem_page_offset = offset_in_page(offset);
page_length = remain;
if ((shmem_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - shmem_page_offset;
if (obj->pages) {
page = obj->pages[offset >> PAGE_SHIFT];
release_page = 0;
} else {
page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
goto out;
}
release_page = 1;
}
page_do_bit17_swizzling = obj_do_bit17_swizzling &&
(page_to_phys(page) & (1 << 17)) != 0;
ret = shmem_pread_fast(page, shmem_page_offset, page_length,
user_data, page_do_bit17_swizzling,
needs_clflush);
if (ret == 0)
goto next_page;
hit_slowpath = 1;
page_cache_get(page);
mutex_unlock(&dev->struct_mutex);
if (!prefaulted) {
ret = fault_in_multipages_writeable(user_data, remain);
/* Userspace is tricking us, but we've already clobbered
* its pages with the prefault and promised to write the
* data up to the first fault. Hence ignore any errors
* and just continue. */
(void)ret;
prefaulted = 1;
}
ret = shmem_pread_slow(page, shmem_page_offset, page_length,
user_data, page_do_bit17_swizzling,
needs_clflush);
mutex_lock(&dev->struct_mutex);
page_cache_release(page);
next_page:
mark_page_accessed(page);
if (release_page)
page_cache_release(page);
if (ret) {
ret = -EFAULT;
goto out;
}
remain -= page_length;
user_data += page_length;
offset += page_length;
}
out:
if (hit_slowpath) {
/* Fixup: Kill any reinstated backing storage pages */
if (obj->madv == __I915_MADV_PURGED)
i915_gem_object_truncate(obj);
}
return ret;
}
/**
* Reads data from the object referenced by handle.
*
* On error, the contents of *data are undefined.
*/
int
i915_gem_pread_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_pread *args = data;
struct drm_i915_gem_object *obj;
int ret = 0;
drm/i915: Do not hold mutex when faulting in user addresses Linus Torvalds found that it was rather trivial to trigger a system freeze: In fact, with lockdep, I don't even need to do the sysrq-d thing: it shows the bug as it happens. It's the X server taking the same lock recursively. Here's the problem: ============================================= [ INFO: possible recursive locking detected ] 2.6.37-rc2-00012-gbdbd01a #7 --------------------------------------------- Xorg/2816 is trying to acquire lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c626c>] i915_gem_fault+0x50/0x17e but task is already holding lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a other info that might help us debug this: 2 locks held by Xorg/2816: #0: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a #1: (&mm->mmap_sem){++++++}, at: [<ffffffff81022d4f>] page_fault+0x156/0x37b This recursion was introduced by rearranging the locking to avoid the double locking on the fast path (4f27b5d and fbd5a26d) and the introduction of the prefault to encourage the fast paths (b5e4f2b). In order to undo the problem, we rearrange the code to perform the access validation upfront, attempt to prefault and then fight for control of the mutex. the best case scenario where the mutex is uncontended the prefaulting is not wasted. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-17 16:10:42 +07:00
if (args->size == 0)
return 0;
if (!access_ok(VERIFY_WRITE,
(char __user *)(uintptr_t)args->data_ptr,
args->size))
return -EFAULT;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
if (&obj->base == NULL) {
ret = -ENOENT;
goto unlock;
}
/* Bounds check source. */
if (args->offset > obj->base.size ||
args->size > obj->base.size - args->offset) {
ret = -EINVAL;
goto out;
}
trace_i915_gem_object_pread(obj, args->offset, args->size);
ret = i915_gem_shmem_pread(dev, obj, args, file);
out:
drm_gem_object_unreference(&obj->base);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
/* This is the fast write path which cannot handle
* page faults in the source data
*/
static inline int
fast_user_write(struct io_mapping *mapping,
loff_t page_base, int page_offset,
char __user *user_data,
int length)
{
char *vaddr_atomic;
unsigned long unwritten;
mm: stack based kmap_atomic() Keep the current interface but ignore the KM_type and use a stack based approach. The advantage is that we get rid of crappy code like: #define __KM_PTE \ (in_nmi() ? KM_NMI_PTE : \ in_irq() ? KM_IRQ_PTE : \ KM_PTE0) and in general can stop worrying about what context we're in and what kmap slots might be appropriate for that. The downside is that FRV kmap_atomic() gets more expensive. For now we use a CPP trick suggested by Andrew: #define kmap_atomic(page, args...) __kmap_atomic(page) to avoid having to touch all kmap_atomic() users in a single patch. [ not compiled on: - mn10300: the arch doesn't actually build with highmem to begin with ] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c] Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 04:21:51 +07:00
vaddr_atomic = io_mapping_map_atomic_wc(mapping, page_base);
unwritten = __copy_from_user_inatomic_nocache(vaddr_atomic + page_offset,
user_data, length);
mm: stack based kmap_atomic() Keep the current interface but ignore the KM_type and use a stack based approach. The advantage is that we get rid of crappy code like: #define __KM_PTE \ (in_nmi() ? KM_NMI_PTE : \ in_irq() ? KM_IRQ_PTE : \ KM_PTE0) and in general can stop worrying about what context we're in and what kmap slots might be appropriate for that. The downside is that FRV kmap_atomic() gets more expensive. For now we use a CPP trick suggested by Andrew: #define kmap_atomic(page, args...) __kmap_atomic(page) to avoid having to touch all kmap_atomic() users in a single patch. [ not compiled on: - mn10300: the arch doesn't actually build with highmem to begin with ] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c] Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 04:21:51 +07:00
io_mapping_unmap_atomic(vaddr_atomic);
return unwritten;
}
/**
* This is the fast pwrite path, where we copy the data directly from the
* user into the GTT, uncached.
*/
static int
i915_gem_gtt_pwrite_fast(struct drm_device *dev,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_pwrite *args,
struct drm_file *file)
{
drm_i915_private_t *dev_priv = dev->dev_private;
ssize_t remain;
loff_t offset, page_base;
char __user *user_data;
int page_offset, page_length, ret;
ret = i915_gem_object_pin(obj, 0, true);
if (ret)
goto out;
ret = i915_gem_object_set_to_gtt_domain(obj, true);
if (ret)
goto out_unpin;
ret = i915_gem_object_put_fence(obj);
if (ret)
goto out_unpin;
user_data = (char __user *) (uintptr_t) args->data_ptr;
remain = args->size;
offset = obj->gtt_offset + args->offset;
while (remain > 0) {
/* Operation in this page
*
* page_base = page offset within aperture
* page_offset = offset within page
* page_length = bytes to copy for this page
*/
page_base = offset & PAGE_MASK;
page_offset = offset_in_page(offset);
page_length = remain;
if ((page_offset + remain) > PAGE_SIZE)
page_length = PAGE_SIZE - page_offset;
/* If we get a fault while copying data, then (presumably) our
* source page isn't available. Return the error and we'll
* retry in the slow path.
*/
if (fast_user_write(dev_priv->mm.gtt_mapping, page_base,
page_offset, user_data, page_length)) {
ret = -EFAULT;
goto out_unpin;
}
remain -= page_length;
user_data += page_length;
offset += page_length;
}
out_unpin:
i915_gem_object_unpin(obj);
out:
return ret;
}
/* Per-page copy function for the shmem pwrite fastpath.
* Flushes invalid cachelines before writing to the target if
* needs_clflush_before is set and flushes out any written cachelines after
* writing if needs_clflush is set. */
static int
shmem_pwrite_fast(struct page *page, int shmem_page_offset, int page_length,
char __user *user_data,
bool page_do_bit17_swizzling,
bool needs_clflush_before,
bool needs_clflush_after)
{
char *vaddr;
int ret;
if (unlikely(page_do_bit17_swizzling))
return -EINVAL;
vaddr = kmap_atomic(page);
if (needs_clflush_before)
drm_clflush_virt_range(vaddr + shmem_page_offset,
page_length);
ret = __copy_from_user_inatomic_nocache(vaddr + shmem_page_offset,
user_data,
page_length);
if (needs_clflush_after)
drm_clflush_virt_range(vaddr + shmem_page_offset,
page_length);
kunmap_atomic(vaddr);
return ret;
}
/* Only difference to the fast-path function is that this can handle bit17
* and uses non-atomic copy and kmap functions. */
static int
shmem_pwrite_slow(struct page *page, int shmem_page_offset, int page_length,
char __user *user_data,
bool page_do_bit17_swizzling,
bool needs_clflush_before,
bool needs_clflush_after)
{
char *vaddr;
int ret;
vaddr = kmap(page);
if (unlikely(needs_clflush_before || page_do_bit17_swizzling))
shmem_clflush_swizzled_range(vaddr + shmem_page_offset,
page_length,
page_do_bit17_swizzling);
if (page_do_bit17_swizzling)
ret = __copy_from_user_swizzled(vaddr, shmem_page_offset,
user_data,
page_length);
else
ret = __copy_from_user(vaddr + shmem_page_offset,
user_data,
page_length);
if (needs_clflush_after)
shmem_clflush_swizzled_range(vaddr + shmem_page_offset,
page_length,
page_do_bit17_swizzling);
kunmap(page);
return ret;
}
static int
i915_gem_shmem_pwrite(struct drm_device *dev,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_pwrite *args,
struct drm_file *file)
{
struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
ssize_t remain;
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 19:57:31 +07:00
loff_t offset;
char __user *user_data;
int shmem_page_offset, page_length, ret = 0;
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 19:57:31 +07:00
int obj_do_bit17_swizzling, page_do_bit17_swizzling;
int hit_slowpath = 0;
int needs_clflush_after = 0;
int needs_clflush_before = 0;
int release_page;
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 19:57:31 +07:00
user_data = (char __user *) (uintptr_t) args->data_ptr;
remain = args->size;
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 19:57:31 +07:00
obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
/* If we're not in the cpu write domain, set ourself into the gtt
* write domain and manually flush cachelines (if required). This
* optimizes for the case when the gpu will use the data
* right away and we therefore have to clflush anyway. */
if (obj->cache_level == I915_CACHE_NONE)
needs_clflush_after = 1;
ret = i915_gem_object_set_to_gtt_domain(obj, true);
if (ret)
return ret;
}
/* Same trick applies for invalidate partially written cachelines before
* writing. */
if (!(obj->base.read_domains & I915_GEM_DOMAIN_CPU)
&& obj->cache_level == I915_CACHE_NONE)
needs_clflush_before = 1;
offset = args->offset;
obj->dirty = 1;
while (remain > 0) {
struct page *page;
int partial_cacheline_write;
/* Operation in this page
*
* shmem_page_offset = offset within page in shmem file
* page_length = bytes to copy for this page
*/
shmem_page_offset = offset_in_page(offset);
page_length = remain;
if ((shmem_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - shmem_page_offset;
/* If we don't overwrite a cacheline completely we need to be
* careful to have up-to-date data by first clflushing. Don't
* overcomplicate things and flush the entire patch. */
partial_cacheline_write = needs_clflush_before &&
((shmem_page_offset | page_length)
& (boot_cpu_data.x86_clflush_size - 1));
if (obj->pages) {
page = obj->pages[offset >> PAGE_SHIFT];
release_page = 0;
} else {
page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
goto out;
}
release_page = 1;
}
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 19:57:31 +07:00
page_do_bit17_swizzling = obj_do_bit17_swizzling &&
(page_to_phys(page) & (1 << 17)) != 0;
ret = shmem_pwrite_fast(page, shmem_page_offset, page_length,
user_data, page_do_bit17_swizzling,
partial_cacheline_write,
needs_clflush_after);
if (ret == 0)
goto next_page;
hit_slowpath = 1;
page_cache_get(page);
mutex_unlock(&dev->struct_mutex);
ret = shmem_pwrite_slow(page, shmem_page_offset, page_length,
user_data, page_do_bit17_swizzling,
partial_cacheline_write,
needs_clflush_after);
mutex_lock(&dev->struct_mutex);
page_cache_release(page);
next_page:
set_page_dirty(page);
mark_page_accessed(page);
if (release_page)
page_cache_release(page);
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 19:57:31 +07:00
if (ret) {
ret = -EFAULT;
goto out;
}
remain -= page_length;
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 19:57:31 +07:00
user_data += page_length;
offset += page_length;
}
out:
if (hit_slowpath) {
/* Fixup: Kill any reinstated backing storage pages */
if (obj->madv == __I915_MADV_PURGED)
i915_gem_object_truncate(obj);
/* and flush dirty cachelines in case the object isn't in the cpu write
* domain anymore. */
if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
i915_gem_clflush_object(obj);
intel_gtt_chipset_flush();
}
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 19:57:31 +07:00
}
if (needs_clflush_after)
intel_gtt_chipset_flush();
return ret;
}
/**
* Writes data to the object referenced by handle.
*
* On error, the contents of the buffer that were to be modified are undefined.
*/
int
i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_pwrite *args = data;
struct drm_i915_gem_object *obj;
drm/i915: Do not hold mutex when faulting in user addresses Linus Torvalds found that it was rather trivial to trigger a system freeze: In fact, with lockdep, I don't even need to do the sysrq-d thing: it shows the bug as it happens. It's the X server taking the same lock recursively. Here's the problem: ============================================= [ INFO: possible recursive locking detected ] 2.6.37-rc2-00012-gbdbd01a #7 --------------------------------------------- Xorg/2816 is trying to acquire lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c626c>] i915_gem_fault+0x50/0x17e but task is already holding lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a other info that might help us debug this: 2 locks held by Xorg/2816: #0: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a #1: (&mm->mmap_sem){++++++}, at: [<ffffffff81022d4f>] page_fault+0x156/0x37b This recursion was introduced by rearranging the locking to avoid the double locking on the fast path (4f27b5d and fbd5a26d) and the introduction of the prefault to encourage the fast paths (b5e4f2b). In order to undo the problem, we rearrange the code to perform the access validation upfront, attempt to prefault and then fight for control of the mutex. the best case scenario where the mutex is uncontended the prefaulting is not wasted. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-17 16:10:42 +07:00
int ret;
if (args->size == 0)
return 0;
if (!access_ok(VERIFY_READ,
(char __user *)(uintptr_t)args->data_ptr,
args->size))
return -EFAULT;
ret = fault_in_multipages_readable((char __user *)(uintptr_t)args->data_ptr,
args->size);
drm/i915: Do not hold mutex when faulting in user addresses Linus Torvalds found that it was rather trivial to trigger a system freeze: In fact, with lockdep, I don't even need to do the sysrq-d thing: it shows the bug as it happens. It's the X server taking the same lock recursively. Here's the problem: ============================================= [ INFO: possible recursive locking detected ] 2.6.37-rc2-00012-gbdbd01a #7 --------------------------------------------- Xorg/2816 is trying to acquire lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c626c>] i915_gem_fault+0x50/0x17e but task is already holding lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a other info that might help us debug this: 2 locks held by Xorg/2816: #0: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a #1: (&mm->mmap_sem){++++++}, at: [<ffffffff81022d4f>] page_fault+0x156/0x37b This recursion was introduced by rearranging the locking to avoid the double locking on the fast path (4f27b5d and fbd5a26d) and the introduction of the prefault to encourage the fast paths (b5e4f2b). In order to undo the problem, we rearrange the code to perform the access validation upfront, attempt to prefault and then fight for control of the mutex. the best case scenario where the mutex is uncontended the prefaulting is not wasted. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-17 16:10:42 +07:00
if (ret)
return -EFAULT;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
if (&obj->base == NULL) {
ret = -ENOENT;
goto unlock;
}
/* Bounds check destination. */
if (args->offset > obj->base.size ||
args->size > obj->base.size - args->offset) {
ret = -EINVAL;
goto out;
}
trace_i915_gem_object_pwrite(obj, args->offset, args->size);
ret = -EFAULT;
/* We can only do the GTT pwrite on untiled buffers, as otherwise
* it would end up going through the fenced access, and we'll get
* different detiling behavior between reading and writing.
* pread/pwrite currently are reading and writing from the CPU
* perspective, requiring manual detiling by the client.
*/
if (obj->phys_obj) {
ret = i915_gem_phys_pwrite(dev, obj, args, file);
goto out;
}
if (obj->gtt_space &&
obj->cache_level == I915_CACHE_NONE &&
obj->tiling_mode == I915_TILING_NONE &&
obj->map_and_fenceable &&
obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
ret = i915_gem_gtt_pwrite_fast(dev, obj, args, file);
/* Note that the gtt paths might fail with non-page-backed user
* pointers (e.g. gtt mappings when moving data between
* textures). Fallback to the shmem path in that case. */
}
if (ret == -EFAULT)
ret = i915_gem_shmem_pwrite(dev, obj, args, file);
out:
drm_gem_object_unreference(&obj->base);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
/**
* Called when user space prepares to use an object with the CPU, either
* through the mmap ioctl's mapping or a GTT mapping.
*/
int
i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_set_domain *args = data;
struct drm_i915_gem_object *obj;
uint32_t read_domains = args->read_domains;
uint32_t write_domain = args->write_domain;
int ret;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
/* Only handle setting domains to types used by the CPU. */
if (write_domain & I915_GEM_GPU_DOMAINS)
return -EINVAL;
if (read_domains & I915_GEM_GPU_DOMAINS)
return -EINVAL;
/* Having something in the write domain implies it's in the read
* domain, and only that read domain. Enforce that in the request.
*/
if (write_domain != 0 && read_domains != write_domain)
return -EINVAL;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
if (&obj->base == NULL) {
ret = -ENOENT;
goto unlock;
}
if (read_domains & I915_GEM_DOMAIN_GTT) {
ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
/* Silently promote "you're not bound, there was nothing to do"
* to success, since the client was just asking us to
* make sure everything was done.
*/
if (ret == -EINVAL)
ret = 0;
} else {
ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0);
}
drm_gem_object_unreference(&obj->base);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
/**
* Called when user space has done writes to this buffer
*/
int
i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_sw_finish *args = data;
struct drm_i915_gem_object *obj;
int ret = 0;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
if (&obj->base == NULL) {
ret = -ENOENT;
goto unlock;
}
/* Pinned buffers may be scanout, so flush the cache */
if (obj->pin_count)
i915_gem_object_flush_cpu_write_domain(obj);
drm_gem_object_unreference(&obj->base);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
/**
* Maps the contents of an object, returning the address it is mapped
* into.
*
* While the mapping holds a reference on the contents of the object, it doesn't
* imply a ref on the object itself.
*/
int
i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_mmap *args = data;
struct drm_gem_object *obj;
unsigned long addr;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
obj = drm_gem_object_lookup(dev, file, args->handle);
if (obj == NULL)
return -ENOENT;
down_write(&current->mm->mmap_sem);
addr = do_mmap(obj->filp, 0, args->size,
PROT_READ | PROT_WRITE, MAP_SHARED,
args->offset);
up_write(&current->mm->mmap_sem);
drm_gem_object_unreference_unlocked(obj);
if (IS_ERR((void *)addr))
return addr;
args->addr_ptr = (uint64_t) addr;
return 0;
}
/**
* i915_gem_fault - fault a page into the GTT
* vma: VMA in question
* vmf: fault info
*
* The fault handler is set up by drm_gem_mmap() when a object is GTT mapped
* from userspace. The fault handler takes care of binding the object to
* the GTT (if needed), allocating and programming a fence register (again,
* only if needed based on whether the old reg is still valid or the object
* is tiled) and inserting a new PTE into the faulting process.
*
* Note that the faulting process may involve evicting existing objects
* from the GTT and/or fence registers to make room. So performance may
* suffer if the GTT working set is large or there are few fence registers
* left.
*/
int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
{
struct drm_i915_gem_object *obj = to_intel_bo(vma->vm_private_data);
struct drm_device *dev = obj->base.dev;
drm_i915_private_t *dev_priv = dev->dev_private;
pgoff_t page_offset;
unsigned long pfn;
int ret = 0;
bool write = !!(vmf->flags & FAULT_FLAG_WRITE);
/* We don't use vmf->pgoff since that has the fake offset */
page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start) >>
PAGE_SHIFT;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
goto out;
trace_i915_gem_object_fault(obj, page_offset, true, write);
/* Now bind it into the GTT if needed */
if (!obj->map_and_fenceable) {
ret = i915_gem_object_unbind(obj);
if (ret)
goto unlock;
}
if (!obj->gtt_space) {
ret = i915_gem_object_bind_to_gtt(obj, 0, true);
if (ret)
goto unlock;
ret = i915_gem_object_set_to_gtt_domain(obj, write);
if (ret)
goto unlock;
}
if (!obj->has_global_gtt_mapping)
i915_gem_gtt_bind_object(obj, obj->cache_level);
ret = i915_gem_object_get_fence(obj);
if (ret)
goto unlock;
if (i915_gem_object_is_inactive(obj))
list_move_tail(&obj->mm_list, &dev_priv->mm.inactive_list);
obj->fault_mappable = true;
pfn = ((dev->agp->base + obj->gtt_offset) >> PAGE_SHIFT) +
page_offset;
/* Finally, remap it using the new GTT offset */
ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn);
unlock:
mutex_unlock(&dev->struct_mutex);
out:
switch (ret) {
case -EIO:
case -EAGAIN:
/* Give the error handler a chance to run and move the
* objects off the GPU active list. Next time we service the
* fault, we should be able to transition the page into the
* GTT without touching the GPU (and so avoid further
* EIO/EGAIN). If the GPU is wedged, then there is no issue
* with coherency, just lost writes.
*/
set_need_resched();
case 0:
case -ERESTARTSYS:
case -EINTR:
return VM_FAULT_NOPAGE;
case -ENOMEM:
return VM_FAULT_OOM;
default:
return VM_FAULT_SIGBUS;
}
}
/**
* i915_gem_release_mmap - remove physical page mappings
* @obj: obj in question
*
* Preserve the reservation of the mmapping with the DRM core code, but
* relinquish ownership of the pages back to the system.
*
* It is vital that we remove the page mapping if we have mapped a tiled
* object through the GTT and then lose the fence register due to
* resource pressure. Similarly if the object has been moved out of the
* aperture, than pages mapped into userspace must be revoked. Removing the
* mapping will then trigger a page fault on the next user access, allowing
* fixup by i915_gem_fault().
*/
void
i915_gem_release_mmap(struct drm_i915_gem_object *obj)
{
if (!obj->fault_mappable)
return;
drm/i915: Avoid unmapping pages from a NULL address space Found by gem_stress. As we perform retirement from a workqueue, it is possible for us to free and unbind objects after the last close on the device, and so after the address space has been torn down and reset to NULL: BUG: unable to handle kernel NULL pointer dereference at 00000054 IP: [<c1295a20>] mutex_lock+0xf/0x27 *pde = 00000000 Oops: 0002 [#1] SMP last sysfs file: /sys/module/vt/parameters/default_utf8 Pid: 5, comm: kworker/u:0 Not tainted 2.6.38+ #214 EIP: 0060:[<c1295a20>] EFLAGS: 00010206 CPU: 1 EIP is at mutex_lock+0xf/0x27 EAX: 00000054 EBX: 00000054 ECX: 00000000 EDX: 00012fff ESI: 00000028 EDI: 00000000 EBP: f706fe20 ESP: f706fe18 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process kworker/u:0 (pid: 5, ti=f706e000 task=f7060d00 task.ti=f706e000) Stack: f5aa3c60 00000000 f706fe74 c107e7df 00000246 dea55380 00000054 f5aa3c60 f706fe44 00000061 f70b4000 c13fff84 00000008 f706fe54 00000000 00000000 00012f00 00012fff 00000028 c109e575 f6b36700 00100000 00000000 f706fe90 Call Trace: [<c107e7df>] unmap_mapping_range+0x7d/0x1e6 [<c109e575>] ? mntput_no_expire+0x52/0xb6 [<c11c12f6>] i915_gem_release_mmap+0x49/0x58 [<c11c3449>] i915_gem_object_unbind+0x4c/0x125 [<c11c353f>] i915_gem_free_object_tail+0x1d/0xdb [<c11c55a2>] i915_gem_free_object+0x3d/0x41 [<c11a6be2>] ? drm_gem_object_free+0x0/0x27 [<c11a6c07>] drm_gem_object_free+0x25/0x27 [<c113c3ca>] kref_put+0x39/0x42 [<c11c0a59>] drm_gem_object_unreference+0x16/0x18 [<c11c0b15>] i915_gem_object_move_to_inactive+0xba/0xbe [<c11c0c87>] i915_gem_retire_requests_ring+0x16e/0x1a5 [<c11c3645>] i915_gem_retire_requests+0x48/0x63 [<c11c36ac>] i915_gem_retire_work_handler+0x4c/0x117 [<c10385d1>] process_one_work+0x140/0x21b [<c103734c>] ? __need_more_worker+0x13/0x2a [<c10373b1>] ? need_to_create_worker+0x1c/0x35 [<c11c3660>] ? i915_gem_retire_work_handler+0x0/0x117 [<c1038faf>] worker_thread+0xd4/0x14b [<c1038edb>] ? worker_thread+0x0/0x14b [<c103be1b>] kthread+0x68/0x6d [<c103bdb3>] ? kthread+0x0/0x6d [<c12970f6>] kernel_thread_helper+0x6/0x10 Code: 00 e8 98 fe ff ff 5d c3 55 89 e5 3e 8d 74 26 00 ba 01 00 00 00 e8 84 fe ff ff 5d c3 55 89 e5 53 8d 64 24 fc 3e 8d 74 26 00 89 c3 <f0> ff 08 79 05 e8 ab ff ff ff 89 e0 25 00 e0 ff ff 89 43 10 58 EIP: [<c1295a20>] mutex_lock+0xf/0x27 SS:ESP 0068:f706fe18 CR2: 0000000000000054 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com>
2011-03-21 04:09:12 +07:00
if (obj->base.dev->dev_mapping)
unmap_mapping_range(obj->base.dev->dev_mapping,
(loff_t)obj->base.map_list.hash.key<<PAGE_SHIFT,
obj->base.size, 1);
obj->fault_mappable = false;
}
static uint32_t
i915_gem_get_gtt_size(struct drm_device *dev, uint32_t size, int tiling_mode)
{
uint32_t gtt_size;
if (INTEL_INFO(dev)->gen >= 4 ||
tiling_mode == I915_TILING_NONE)
return size;
/* Previous chips need a power-of-two fence region when tiling */
if (INTEL_INFO(dev)->gen == 3)
gtt_size = 1024*1024;
else
gtt_size = 512*1024;
while (gtt_size < size)
gtt_size <<= 1;
return gtt_size;
}
/**
* i915_gem_get_gtt_alignment - return required GTT alignment for an object
* @obj: object to check
*
* Return the required GTT alignment for an object, taking into account
* potential fence register mapping.
*/
static uint32_t
i915_gem_get_gtt_alignment(struct drm_device *dev,
uint32_t size,
int tiling_mode)
{
/*
* Minimum alignment is 4k (GTT page size), but might be greater
* if a fence register is needed for the object.
*/
if (INTEL_INFO(dev)->gen >= 4 ||
tiling_mode == I915_TILING_NONE)
return 4096;
/*
* Previous chips need to be aligned to the size of the smallest
* fence register that can contain the object.
*/
return i915_gem_get_gtt_size(dev, size, tiling_mode);
}
/**
* i915_gem_get_unfenced_gtt_alignment - return required GTT alignment for an
* unfenced object
* @dev: the device
* @size: size of the object
* @tiling_mode: tiling mode of the object
*
* Return the required GTT alignment for an object, only taking into account
* unfenced tiled surface requirements.
*/
uint32_t
i915_gem_get_unfenced_gtt_alignment(struct drm_device *dev,
uint32_t size,
int tiling_mode)
{
/*
* Minimum alignment is 4k (GTT page size) for sane hw.
*/
if (INTEL_INFO(dev)->gen >= 4 || IS_G33(dev) ||
tiling_mode == I915_TILING_NONE)
return 4096;
/* Previous hardware however needs to be aligned to a power-of-two
* tile height. The simplest method for determining this is to reuse
* the power-of-tile object size.
*/
return i915_gem_get_gtt_size(dev, size, tiling_mode);
}
int
i915_gem_mmap_gtt(struct drm_file *file,
struct drm_device *dev,
uint32_t handle,
uint64_t *offset)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj;
int ret;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
if (&obj->base == NULL) {
ret = -ENOENT;
goto unlock;
}
if (obj->base.size > dev_priv->mm.gtt_mappable_end) {
ret = -E2BIG;
goto out;
}
if (obj->madv != I915_MADV_WILLNEED) {
DRM_ERROR("Attempting to mmap a purgeable buffer\n");
ret = -EINVAL;
goto out;
}
if (!obj->base.map_list.map) {
ret = drm_gem_create_mmap_offset(&obj->base);
if (ret)
goto out;
}
*offset = (u64)obj->base.map_list.hash.key << PAGE_SHIFT;
out:
drm_gem_object_unreference(&obj->base);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
/**
* i915_gem_mmap_gtt_ioctl - prepare an object for GTT mmap'ing
* @dev: DRM device
* @data: GTT mapping ioctl data
* @file: GEM object info
*
* Simply returns the fake offset to userspace so it can mmap it.
* The mmap call will end up in drm_gem_mmap(), which will set things
* up so we can get faults in the handler above.
*
* The fault handler will take care of binding the object into the GTT
* (since it may have been evicted to make room for something), allocating
* a fence register, and mapping the appropriate aperture address into
* userspace.
*/
int
i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_mmap_gtt *args = data;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
return i915_gem_mmap_gtt(file, dev, args->handle, &args->offset);
}
static int
i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj,
gfp_t gfpmask)
{
int page_count, i;
struct address_space *mapping;
struct inode *inode;
struct page *page;
/* Get the list of pages out of our struct file. They'll be pinned
* at this point until we release them.
*/
page_count = obj->base.size / PAGE_SIZE;
BUG_ON(obj->pages != NULL);
obj->pages = drm_malloc_ab(page_count, sizeof(struct page *));
if (obj->pages == NULL)
return -ENOMEM;
inode = obj->base.filp->f_path.dentry->d_inode;
mapping = inode->i_mapping;
gfpmask |= mapping_gfp_mask(mapping);
for (i = 0; i < page_count; i++) {
page = shmem_read_mapping_page_gfp(mapping, i, gfpmask);
if (IS_ERR(page))
goto err_pages;
obj->pages[i] = page;
}
if (i915_gem_object_needs_bit17_swizzle(obj))
i915_gem_object_do_bit_17_swizzle(obj);
return 0;
err_pages:
while (i--)
page_cache_release(obj->pages[i]);
drm_free_large(obj->pages);
obj->pages = NULL;
return PTR_ERR(page);
}
static void
i915_gem_object_put_pages_gtt(struct drm_i915_gem_object *obj)
{
int page_count = obj->base.size / PAGE_SIZE;
int i;
BUG_ON(obj->madv == __I915_MADV_PURGED);
if (i915_gem_object_needs_bit17_swizzle(obj))
i915_gem_object_save_bit_17_swizzle(obj);
if (obj->madv == I915_MADV_DONTNEED)
obj->dirty = 0;
for (i = 0; i < page_count; i++) {
if (obj->dirty)
set_page_dirty(obj->pages[i]);
if (obj->madv == I915_MADV_WILLNEED)
mark_page_accessed(obj->pages[i]);
page_cache_release(obj->pages[i]);
}
obj->dirty = 0;
drm_free_large(obj->pages);
obj->pages = NULL;
}
void
i915_gem_object_move_to_active(struct drm_i915_gem_object *obj,
struct intel_ring_buffer *ring,
u32 seqno)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
BUG_ON(ring == NULL);
obj->ring = ring;
/* Add a reference if we're newly entering the active list. */
if (!obj->active) {
drm_gem_object_reference(&obj->base);
obj->active = 1;
}
drm/i915: allow lazy emitting of requests Sometimes (like when flushing in preparation of batchbuffer execution) we know that we'll emit a request but haven't yet done so. Allow this case by simply taking the next seqno by default. Ensure that a request is eventually emitted before waiting for an request by issuing it in i915_wait_request iff this is not yet done. Also replace one open-coded version of i915_gem_object_wait_rendering, to prevent future code-diversion. Chris Wilson asked me to explain and clarify what this patch does and why. Here it goes: Old way of moving objects onto the active list and associating them with a reques: 1. i915_add_request + store the returned seqno somewhere 2. i915_gem_object_move_to_active (with the stored seqno as parameter) For the current users, this is all fine. But I'd like to associate objects (and fence regs) with the batchbuffer request deep down in the execbuf call-chain. I thought about three ways of implementing this. a) Don't care, just emit request when we need a new seqno. When heavily pipelining fence reg changes, this would have caused tons of superflous request (and corresponding irqs). b) Thread all changed fences, objects, whatever through the execbuf-maze, so that when we emit a request, we can store the new seqno at all the right places. c) Kill that seqno-threading-around business by simply storing the next seqno, i.e. allow 2. to be done before 1. in the above sequence. I've decided to implement c) (in this patch). The following patches are just fall-out that resulted from this small conceptual change. * We can handle the flushing list processing where we actually emit a flush (i915_gem_flush and i915_retire_commands) instead of in i915_add_request. The code makes IMHO more sense this way (and i915_add_request looses the flush_domains parameter, obviously). * We can avoid emitting unnecessary requests. IMHO there's no point in emitting more than one request per batchbuffer (with or without an corresponding irq). * By enforcing 2. before 1. ordering in the above sequence the seqno argument of i915_gem_object_move_to_active is redundant and can be dropped. v2: Now i915_wait_request issues request if it is not yet emitted. Also introduce i915_gem_next_request_seqno(dev) just in case we ever need to do some prep work before using a new seqno. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [ickle: Keep i915_gem_object_set_to_display_plane() uninterruptible.] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-02-12 04:13:59 +07:00
/* Move from whatever list we were on to the tail of execution. */
list_move_tail(&obj->mm_list, &dev_priv->mm.active_list);
list_move_tail(&obj->ring_list, &ring->active_list);
obj->last_rendering_seqno = seqno;
if (obj->fenced_gpu_access) {
obj->last_fenced_seqno = seqno;
/* Bump MRU to take account of the delayed flush */
if (obj->fence_reg != I915_FENCE_REG_NONE) {
struct drm_i915_fence_reg *reg;
reg = &dev_priv->fence_regs[obj->fence_reg];
list_move_tail(&reg->lru_list,
&dev_priv->mm.fence_list);
}
}
}
static void
i915_gem_object_move_off_active(struct drm_i915_gem_object *obj)
{
list_del_init(&obj->ring_list);
obj->last_rendering_seqno = 0;
obj->last_fenced_seqno = 0;
}
static void
i915_gem_object_move_to_flushing(struct drm_i915_gem_object *obj)
{
struct drm_device *dev = obj->base.dev;
drm_i915_private_t *dev_priv = dev->dev_private;
BUG_ON(!obj->active);
list_move_tail(&obj->mm_list, &dev_priv->mm.flushing_list);
i915_gem_object_move_off_active(obj);
}
static void
i915_gem_object_move_to_inactive(struct drm_i915_gem_object *obj)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
if (obj->pin_count != 0)
list_move_tail(&obj->mm_list, &dev_priv->mm.pinned_list);
else
list_move_tail(&obj->mm_list, &dev_priv->mm.inactive_list);
BUG_ON(!list_empty(&obj->gpu_write_list));
BUG_ON(!obj->active);
obj->ring = NULL;
i915_gem_object_move_off_active(obj);
obj->fenced_gpu_access = false;
obj->active = 0;
obj->pending_gpu_write = false;
drm_gem_object_unreference(&obj->base);
WARN_ON(i915_verify_lists(dev));
}
/* Immediately discard the backing storage */
static void
i915_gem_object_truncate(struct drm_i915_gem_object *obj)
{
struct inode *inode;
/* Our goal here is to return as much of the memory as
* is possible back to the system as we are called from OOM.
* To do this we must instruct the shmfs to drop all of its
* backing pages, *now*.
*/
inode = obj->base.filp->f_path.dentry->d_inode;
shmem_truncate_range(inode, 0, (loff_t)-1);
if (obj->base.map_list.map)
drm_gem_free_mmap_offset(&obj->base);
obj->madv = __I915_MADV_PURGED;
}
static inline int
i915_gem_object_is_purgeable(struct drm_i915_gem_object *obj)
{
return obj->madv == I915_MADV_DONTNEED;
}
static void
i915_gem_process_flushing_list(struct intel_ring_buffer *ring,
uint32_t flush_domains)
{
struct drm_i915_gem_object *obj, *next;
list_for_each_entry_safe(obj, next,
&ring->gpu_write_list,
gpu_write_list) {
if (obj->base.write_domain & flush_domains) {
uint32_t old_write_domain = obj->base.write_domain;
obj->base.write_domain = 0;
list_del_init(&obj->gpu_write_list);
i915_gem_object_move_to_active(obj, ring,
i915_gem_next_request_seqno(ring));
trace_i915_gem_object_change_domain(obj,
obj->base.read_domains,
old_write_domain);
}
}
}
drm/i915: fixup seqno allocation logic for lazy_request Currently we reserve seqnos only when we emit the request to the ring (by bumping dev_priv->next_seqno), but start using it much earlier for ring->oustanding_lazy_request. When 2 threads compete for the gpu and run on two different rings (e.g. ddx on blitter vs. compositor) hilarity ensued, especially when we get constantly interrupted while reserving buffers. Breakage seems to have been introduced in commit 6f392d548658a17600da7faaf8a5df25ee5f01f6 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sat Aug 7 11:01:22 2010 +0100 drm/i915: Use a common seqno for all rings. This patch fixes up the seqno reservation logic by moving it into i915_gem_next_request_seqno. The ring->add_request functions now superflously still return the new seqno through a pointer, that will be refactored in the next patch. Note that with this change we now unconditionally allocate a seqno, even when ->add_request might fail because the rings are full and the gpu died. But this does not open up a new can of worms because we can already leave behind an outstanding_request_seqno if e.g. the caller gets interrupted with a signal while stalling for the gpu in the eviciton paths. And with the bugfix we only ever have one seqno allocated per ring (and only that ring), so there are no ordering issues with multiple outstanding seqnos on the same ring. v2: Keep i915_gem_get_seqno (but move it to i915_gem.c) to make it clear that we only have one seqno counter for all rings. Suggested by Chris Wilson. v3: As suggested by Chris Wilson use i915_gem_next_request_seqno instead of ring->oustanding_lazy_request to make the follow-up refactoring more clearly correct. Also improve the commit message with issues discussed on irc. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45181 Tested-by: Nicolas Kalkhof nkalkhof()at()web.de Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-25 22:32:49 +07:00
static u32
i915_gem_get_seqno(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 seqno = dev_priv->next_seqno;
/* reserve 0 for non-seqno */
if (++dev_priv->next_seqno == 0)
dev_priv->next_seqno = 1;
return seqno;
}
u32
i915_gem_next_request_seqno(struct intel_ring_buffer *ring)
{
if (ring->outstanding_lazy_request == 0)
ring->outstanding_lazy_request = i915_gem_get_seqno(ring->dev);
return ring->outstanding_lazy_request;
}
int
i915_add_request(struct intel_ring_buffer *ring,
struct drm_file *file,
struct drm_i915_gem_request *request)
{
drm_i915_private_t *dev_priv = ring->dev->dev_private;
uint32_t seqno;
drm/i915: Record the tail at each request and use it to estimate the head By recording the location of every request in the ringbuffer, we know that in order to retire the request the GPU must have finished reading it and so the GPU head is now beyond the tail of the request. We can therefore provide a conservative estimate of where the GPU is reading from in order to avoid having to read back the ring buffer registers when polling for space upon starting a new write into the ringbuffer. A secondary effect is that this allows us to convert intel_ring_buffer_wait() to use i915_wait_request() and so consolidate upon the single function to handle the complicated task of waiting upon the GPU. A necessary precaution is that we need to make that wait uninterruptible to match the existing conditions as all the callers of intel_ring_begin() have not been audited to handle ERESTARTSYS correctly. By using a conservative estimate for the head, and always processing all outstanding requests first, we prevent a race condition between using the estimate and direct reads of I915_RING_HEAD which could result in the value of the head going backwards, and the tail overflowing once again. We are also careful to mark any request that we skip over in order to free space in ring as consumed which provides a self-consistency check. Given sufficient abuse, such as a set of unthrottled GPU bound cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on Sandy Bridge (i5-2520m): firefox-paintball 18927ms -> 15646ms: 1.21x speedup firefox-fishtank 12563ms -> 11278ms: 1.11x speedup which is a mild consolation for the performance those traces achieved from exploiting the buggy autoreported head. v2: Add a few more comments and make request->tail a conservative estimate as suggested by Daniel Vetter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: resolve conflicts with retirement defering and the lack of the autoreport head removal (that will go in through -fixes).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-15 18:25:36 +07:00
u32 request_ring_position;
int was_empty;
int ret;
BUG_ON(request == NULL);
drm/i915: fixup seqno allocation logic for lazy_request Currently we reserve seqnos only when we emit the request to the ring (by bumping dev_priv->next_seqno), but start using it much earlier for ring->oustanding_lazy_request. When 2 threads compete for the gpu and run on two different rings (e.g. ddx on blitter vs. compositor) hilarity ensued, especially when we get constantly interrupted while reserving buffers. Breakage seems to have been introduced in commit 6f392d548658a17600da7faaf8a5df25ee5f01f6 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sat Aug 7 11:01:22 2010 +0100 drm/i915: Use a common seqno for all rings. This patch fixes up the seqno reservation logic by moving it into i915_gem_next_request_seqno. The ring->add_request functions now superflously still return the new seqno through a pointer, that will be refactored in the next patch. Note that with this change we now unconditionally allocate a seqno, even when ->add_request might fail because the rings are full and the gpu died. But this does not open up a new can of worms because we can already leave behind an outstanding_request_seqno if e.g. the caller gets interrupted with a signal while stalling for the gpu in the eviciton paths. And with the bugfix we only ever have one seqno allocated per ring (and only that ring), so there are no ordering issues with multiple outstanding seqnos on the same ring. v2: Keep i915_gem_get_seqno (but move it to i915_gem.c) to make it clear that we only have one seqno counter for all rings. Suggested by Chris Wilson. v3: As suggested by Chris Wilson use i915_gem_next_request_seqno instead of ring->oustanding_lazy_request to make the follow-up refactoring more clearly correct. Also improve the commit message with issues discussed on irc. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45181 Tested-by: Nicolas Kalkhof nkalkhof()at()web.de Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-25 22:32:49 +07:00
seqno = i915_gem_next_request_seqno(ring);
drm/i915: Record the tail at each request and use it to estimate the head By recording the location of every request in the ringbuffer, we know that in order to retire the request the GPU must have finished reading it and so the GPU head is now beyond the tail of the request. We can therefore provide a conservative estimate of where the GPU is reading from in order to avoid having to read back the ring buffer registers when polling for space upon starting a new write into the ringbuffer. A secondary effect is that this allows us to convert intel_ring_buffer_wait() to use i915_wait_request() and so consolidate upon the single function to handle the complicated task of waiting upon the GPU. A necessary precaution is that we need to make that wait uninterruptible to match the existing conditions as all the callers of intel_ring_begin() have not been audited to handle ERESTARTSYS correctly. By using a conservative estimate for the head, and always processing all outstanding requests first, we prevent a race condition between using the estimate and direct reads of I915_RING_HEAD which could result in the value of the head going backwards, and the tail overflowing once again. We are also careful to mark any request that we skip over in order to free space in ring as consumed which provides a self-consistency check. Given sufficient abuse, such as a set of unthrottled GPU bound cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on Sandy Bridge (i5-2520m): firefox-paintball 18927ms -> 15646ms: 1.21x speedup firefox-fishtank 12563ms -> 11278ms: 1.11x speedup which is a mild consolation for the performance those traces achieved from exploiting the buggy autoreported head. v2: Add a few more comments and make request->tail a conservative estimate as suggested by Daniel Vetter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: resolve conflicts with retirement defering and the lack of the autoreport head removal (that will go in through -fixes).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-15 18:25:36 +07:00
/* Record the position of the start of the request so that
* should we detect the updated seqno part-way through the
* GPU processing the request, we never over-estimate the
* position of the head.
*/
request_ring_position = intel_ring_get_tail(ring);
ret = ring->add_request(ring, &seqno);
if (ret)
return ret;
trace_i915_gem_request_add(ring, seqno);
request->seqno = seqno;
request->ring = ring;
drm/i915: Record the tail at each request and use it to estimate the head By recording the location of every request in the ringbuffer, we know that in order to retire the request the GPU must have finished reading it and so the GPU head is now beyond the tail of the request. We can therefore provide a conservative estimate of where the GPU is reading from in order to avoid having to read back the ring buffer registers when polling for space upon starting a new write into the ringbuffer. A secondary effect is that this allows us to convert intel_ring_buffer_wait() to use i915_wait_request() and so consolidate upon the single function to handle the complicated task of waiting upon the GPU. A necessary precaution is that we need to make that wait uninterruptible to match the existing conditions as all the callers of intel_ring_begin() have not been audited to handle ERESTARTSYS correctly. By using a conservative estimate for the head, and always processing all outstanding requests first, we prevent a race condition between using the estimate and direct reads of I915_RING_HEAD which could result in the value of the head going backwards, and the tail overflowing once again. We are also careful to mark any request that we skip over in order to free space in ring as consumed which provides a self-consistency check. Given sufficient abuse, such as a set of unthrottled GPU bound cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on Sandy Bridge (i5-2520m): firefox-paintball 18927ms -> 15646ms: 1.21x speedup firefox-fishtank 12563ms -> 11278ms: 1.11x speedup which is a mild consolation for the performance those traces achieved from exploiting the buggy autoreported head. v2: Add a few more comments and make request->tail a conservative estimate as suggested by Daniel Vetter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: resolve conflicts with retirement defering and the lack of the autoreport head removal (that will go in through -fixes).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-15 18:25:36 +07:00
request->tail = request_ring_position;
request->emitted_jiffies = jiffies;
was_empty = list_empty(&ring->request_list);
list_add_tail(&request->list, &ring->request_list);
if (file) {
struct drm_i915_file_private *file_priv = file->driver_priv;
spin_lock(&file_priv->mm.lock);
request->file_priv = file_priv;
list_add_tail(&request->client_list,
&file_priv->mm.request_list);
spin_unlock(&file_priv->mm.lock);
}
ring->outstanding_lazy_request = 0;
if (!dev_priv->mm.suspended) {
if (i915_enable_hangcheck) {
mod_timer(&dev_priv->hangcheck_timer,
jiffies +
msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD));
}
if (was_empty)
queue_delayed_work(dev_priv->wq,
&dev_priv->mm.retire_work, HZ);
}
return 0;
}
static inline void
i915_gem_request_remove_from_client(struct drm_i915_gem_request *request)
{
struct drm_i915_file_private *file_priv = request->file_priv;
if (!file_priv)
return;
spin_lock(&file_priv->mm.lock);
drm/i915: Prevent racy removal of request from client list When i915_gem_retire_requests_ring calls i915_gem_request_remove_from_client, the client_list for that request may already be removed in i915_gem_release. So we may call twice list_del(&request->client_list), resulting in an oops like this report: [126167.230394] BUG: unable to handle kernel paging request at 00100104 [126167.230699] IP: [<f8c2ce44>] i915_gem_retire_requests_ring+0xd4/0x240 [i915] [126167.231042] *pdpt = 00000000314c1001 *pde = 0000000000000000 [126167.231314] Oops: 0002 [#1] SMP [126167.231471] last sysfs file: /sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT1/current_now [126167.231901] Modules linked in: snd_seq_dummy nls_utf8 isofs btrfs zlib_deflate libcrc32c ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs exportfs reiserfs cryptd aes_i586 aes_generic binfmt_misc vboxnetadp vboxnetflt vboxdrv parport_pc ppdev snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq uvcvideo videodev snd_timer snd_seq_device joydev iwlagn iwlcore mac80211 snd cfg80211 soundcore i915 drm_kms_helper snd_page_alloc psmouse drm serio_raw i2c_algo_bit video lp parport usbhid hid sky2 sdhci_pci ahci sdhci libahci [126167.232018] [126167.232018] Pid: 1101, comm: Xorg Not tainted 2.6.38-6-generic-pae #34-Ubuntu Gateway MC7833U / [126167.232018] EIP: 0060:[<f8c2ce44>] EFLAGS: 00213246 CPU: 0 [126167.232018] EIP is at i915_gem_retire_requests_ring+0xd4/0x240 [i915] [126167.232018] EAX: 00200200 EBX: f1ac25b0 ECX: 00000040 EDX: 00100100 [126167.232018] ESI: f1a2801c EDI: e87fc060 EBP: ef4d7dd8 ESP: ef4d7db0 [126167.232018] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [126167.232018] Process Xorg (pid: 1101, ti=ef4d6000 task=f1ba6500 task.ti=ef4d6000) [126167.232018] Stack: [126167.232018] f1a28000 f1a2809c f1a28094 0058bd97 f1aa2400 f1a2801c 0058bd7b 0058bd85 [126167.232018] f1a2801c f1a28000 ef4d7e38 f8c2e995 ef4d7e30 ef4d7e60 c14d1ebc f6b3a040 [126167.232018] f1522cc0 000000db 00000000 f1ba6500 ffffffa1 00000000 00000001 f1a29214 [126167.232018] Call Trace: Unfortunately the call trace reported was cut, but looking at debug symbols the crash is at __list_del, when probably list_del is called twice on the same request->client_list, as the dereferenced value is LIST_POISON1 + 4, and by looking more at the debug symbols before list_del call it should have being called by i915_gem_request_remove_from_client And as I can see in the code, it seems we indeed have the possibility to remove a request->client_list twice, which would cause the above, because we do list_del(&request->client_list) on both i915_gem_request_remove_from_client and i915_gem_release As Chris Wilson pointed out, it's indeed the case: "(...) I had thought that the actual insertion/deletion was serialised under the struct mutex and the intention of the spinlock was to protect the unlocked list traversal during throttling. However, I missed that i915_gem_release() is also called without struct mutex and so we do need the double check for i915_gem_request_remove_from_client()." This change does the required check to avoid the duplicate remove of request->client_list. Bugzilla: http://bugs.launchpad.net/bugs/733780 Cc: stable@kernel.org # 2.6.38 Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-03-17 20:45:12 +07:00
if (request->file_priv) {
list_del(&request->client_list);
request->file_priv = NULL;
}
spin_unlock(&file_priv->mm.lock);
}
static void i915_gem_reset_ring_lists(struct drm_i915_private *dev_priv,
struct intel_ring_buffer *ring)
{
while (!list_empty(&ring->request_list)) {
struct drm_i915_gem_request *request;
request = list_first_entry(&ring->request_list,
struct drm_i915_gem_request,
list);
list_del(&request->list);
i915_gem_request_remove_from_client(request);
kfree(request);
}
while (!list_empty(&ring->active_list)) {
struct drm_i915_gem_object *obj;
obj = list_first_entry(&ring->active_list,
struct drm_i915_gem_object,
ring_list);
obj->base.write_domain = 0;
list_del_init(&obj->gpu_write_list);
i915_gem_object_move_to_inactive(obj);
}
}
static void i915_gem_reset_fences(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int i;
for (i = 0; i < dev_priv->num_fence_regs; i++) {
struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i];
i915_gem_write_fence(dev, i, NULL);
if (reg->obj)
i915_gem_object_fence_lost(reg->obj);
reg->pin_count = 0;
reg->obj = NULL;
INIT_LIST_HEAD(&reg->lru_list);
}
INIT_LIST_HEAD(&dev_priv->mm.fence_list);
}
void i915_gem_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj;
int i;
for (i = 0; i < I915_NUM_RINGS; i++)
i915_gem_reset_ring_lists(dev_priv, &dev_priv->ring[i]);
/* Remove anything from the flushing lists. The GPU cache is likely
* to be lost on reset along with the data, so simply move the
* lost bo to the inactive list.
*/
while (!list_empty(&dev_priv->mm.flushing_list)) {
obj = list_first_entry(&dev_priv->mm.flushing_list,
struct drm_i915_gem_object,
mm_list);
obj->base.write_domain = 0;
list_del_init(&obj->gpu_write_list);
i915_gem_object_move_to_inactive(obj);
}
/* Move everything out of the GPU domains to ensure we do any
* necessary invalidation upon reuse.
*/
list_for_each_entry(obj,
&dev_priv->mm.inactive_list,
mm_list)
{
obj->base.read_domains &= ~I915_GEM_GPU_DOMAINS;
}
/* The fence registers are invalidated so clear them out */
i915_gem_reset_fences(dev);
}
/**
* This function clears the request list as sequence numbers are passed.
*/
drm/i915: Record the tail at each request and use it to estimate the head By recording the location of every request in the ringbuffer, we know that in order to retire the request the GPU must have finished reading it and so the GPU head is now beyond the tail of the request. We can therefore provide a conservative estimate of where the GPU is reading from in order to avoid having to read back the ring buffer registers when polling for space upon starting a new write into the ringbuffer. A secondary effect is that this allows us to convert intel_ring_buffer_wait() to use i915_wait_request() and so consolidate upon the single function to handle the complicated task of waiting upon the GPU. A necessary precaution is that we need to make that wait uninterruptible to match the existing conditions as all the callers of intel_ring_begin() have not been audited to handle ERESTARTSYS correctly. By using a conservative estimate for the head, and always processing all outstanding requests first, we prevent a race condition between using the estimate and direct reads of I915_RING_HEAD which could result in the value of the head going backwards, and the tail overflowing once again. We are also careful to mark any request that we skip over in order to free space in ring as consumed which provides a self-consistency check. Given sufficient abuse, such as a set of unthrottled GPU bound cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on Sandy Bridge (i5-2520m): firefox-paintball 18927ms -> 15646ms: 1.21x speedup firefox-fishtank 12563ms -> 11278ms: 1.11x speedup which is a mild consolation for the performance those traces achieved from exploiting the buggy autoreported head. v2: Add a few more comments and make request->tail a conservative estimate as suggested by Daniel Vetter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: resolve conflicts with retirement defering and the lack of the autoreport head removal (that will go in through -fixes).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-15 18:25:36 +07:00
void
i915_gem_retire_requests_ring(struct intel_ring_buffer *ring)
{
uint32_t seqno;
int i;
if (list_empty(&ring->request_list))
return;
WARN_ON(i915_verify_lists(ring->dev));
seqno = ring->get_seqno(ring);
for (i = 0; i < ARRAY_SIZE(ring->sync_seqno); i++)
if (seqno >= ring->sync_seqno[i])
ring->sync_seqno[i] = 0;
while (!list_empty(&ring->request_list)) {
struct drm_i915_gem_request *request;
request = list_first_entry(&ring->request_list,
struct drm_i915_gem_request,
list);
if (!i915_seqno_passed(seqno, request->seqno))
break;
trace_i915_gem_request_retire(ring, request->seqno);
drm/i915: Record the tail at each request and use it to estimate the head By recording the location of every request in the ringbuffer, we know that in order to retire the request the GPU must have finished reading it and so the GPU head is now beyond the tail of the request. We can therefore provide a conservative estimate of where the GPU is reading from in order to avoid having to read back the ring buffer registers when polling for space upon starting a new write into the ringbuffer. A secondary effect is that this allows us to convert intel_ring_buffer_wait() to use i915_wait_request() and so consolidate upon the single function to handle the complicated task of waiting upon the GPU. A necessary precaution is that we need to make that wait uninterruptible to match the existing conditions as all the callers of intel_ring_begin() have not been audited to handle ERESTARTSYS correctly. By using a conservative estimate for the head, and always processing all outstanding requests first, we prevent a race condition between using the estimate and direct reads of I915_RING_HEAD which could result in the value of the head going backwards, and the tail overflowing once again. We are also careful to mark any request that we skip over in order to free space in ring as consumed which provides a self-consistency check. Given sufficient abuse, such as a set of unthrottled GPU bound cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on Sandy Bridge (i5-2520m): firefox-paintball 18927ms -> 15646ms: 1.21x speedup firefox-fishtank 12563ms -> 11278ms: 1.11x speedup which is a mild consolation for the performance those traces achieved from exploiting the buggy autoreported head. v2: Add a few more comments and make request->tail a conservative estimate as suggested by Daniel Vetter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: resolve conflicts with retirement defering and the lack of the autoreport head removal (that will go in through -fixes).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-15 18:25:36 +07:00
/* We know the GPU must have read the request to have
* sent us the seqno + interrupt, so use the position
* of tail of the request to update the last known position
* of the GPU head.
*/
ring->last_retired_head = request->tail;
list_del(&request->list);
i915_gem_request_remove_from_client(request);
kfree(request);
}
/* Move any buffers on the active list that are no longer referenced
* by the ringbuffer to the flushing/inactive lists as appropriate.
*/
while (!list_empty(&ring->active_list)) {
struct drm_i915_gem_object *obj;
obj = list_first_entry(&ring->active_list,
struct drm_i915_gem_object,
ring_list);
if (!i915_seqno_passed(seqno, obj->last_rendering_seqno))
break;
if (obj->base.write_domain != 0)
i915_gem_object_move_to_flushing(obj);
else
i915_gem_object_move_to_inactive(obj);
}
if (unlikely(ring->trace_irq_seqno &&
i915_seqno_passed(seqno, ring->trace_irq_seqno))) {
ring->irq_put(ring);
ring->trace_irq_seqno = 0;
}
WARN_ON(i915_verify_lists(ring->dev));
}
void
i915_gem_retire_requests(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int i;
if (!list_empty(&dev_priv->mm.deferred_free_list)) {
struct drm_i915_gem_object *obj, *next;
/* We must be careful that during unbind() we do not
* accidentally infinitely recurse into retire requests.
* Currently:
* retire -> free -> unbind -> wait -> retire_ring
*/
list_for_each_entry_safe(obj, next,
&dev_priv->mm.deferred_free_list,
mm_list)
i915_gem_free_object_tail(obj);
}
for (i = 0; i < I915_NUM_RINGS; i++)
i915_gem_retire_requests_ring(&dev_priv->ring[i]);
}
static void
i915_gem_retire_work_handler(struct work_struct *work)
{
drm_i915_private_t *dev_priv;
struct drm_device *dev;
bool idle;
int i;
dev_priv = container_of(work, drm_i915_private_t,
mm.retire_work.work);
dev = dev_priv->dev;
/* Come back later if the device is busy... */
if (!mutex_trylock(&dev->struct_mutex)) {
queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
return;
}
i915_gem_retire_requests(dev);
/* Send a periodic flush down the ring so we don't hold onto GEM
* objects indefinitely.
*/
idle = true;
for (i = 0; i < I915_NUM_RINGS; i++) {
struct intel_ring_buffer *ring = &dev_priv->ring[i];
if (!list_empty(&ring->gpu_write_list)) {
struct drm_i915_gem_request *request;
int ret;
ret = i915_gem_flush_ring(ring,
0, I915_GEM_GPU_DOMAINS);
request = kzalloc(sizeof(*request), GFP_KERNEL);
if (ret || request == NULL ||
i915_add_request(ring, NULL, request))
kfree(request);
}
idle &= list_empty(&ring->request_list);
}
if (!dev_priv->mm.suspended && !idle)
queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
mutex_unlock(&dev->struct_mutex);
}
/**
* Waits for a sequence number to be signaled, and cleans up the
* request and object lists appropriately for that event.
*/
int
i915_wait_request(struct intel_ring_buffer *ring,
uint32_t seqno,
bool do_retire)
{
drm_i915_private_t *dev_priv = ring->dev->dev_private;
u32 ier;
int ret = 0;
BUG_ON(seqno == 0);
if (atomic_read(&dev_priv->mm.wedged)) {
struct completion *x = &dev_priv->error_completion;
bool recovery_complete;
unsigned long flags;
/* Give the error handler a chance to run. */
spin_lock_irqsave(&x->wait.lock, flags);
recovery_complete = x->done > 0;
spin_unlock_irqrestore(&x->wait.lock, flags);
return recovery_complete ? -EIO : -EAGAIN;
}
if (seqno == ring->outstanding_lazy_request) {
struct drm_i915_gem_request *request;
request = kzalloc(sizeof(*request), GFP_KERNEL);
if (request == NULL)
drm/i915: allow lazy emitting of requests Sometimes (like when flushing in preparation of batchbuffer execution) we know that we'll emit a request but haven't yet done so. Allow this case by simply taking the next seqno by default. Ensure that a request is eventually emitted before waiting for an request by issuing it in i915_wait_request iff this is not yet done. Also replace one open-coded version of i915_gem_object_wait_rendering, to prevent future code-diversion. Chris Wilson asked me to explain and clarify what this patch does and why. Here it goes: Old way of moving objects onto the active list and associating them with a reques: 1. i915_add_request + store the returned seqno somewhere 2. i915_gem_object_move_to_active (with the stored seqno as parameter) For the current users, this is all fine. But I'd like to associate objects (and fence regs) with the batchbuffer request deep down in the execbuf call-chain. I thought about three ways of implementing this. a) Don't care, just emit request when we need a new seqno. When heavily pipelining fence reg changes, this would have caused tons of superflous request (and corresponding irqs). b) Thread all changed fences, objects, whatever through the execbuf-maze, so that when we emit a request, we can store the new seqno at all the right places. c) Kill that seqno-threading-around business by simply storing the next seqno, i.e. allow 2. to be done before 1. in the above sequence. I've decided to implement c) (in this patch). The following patches are just fall-out that resulted from this small conceptual change. * We can handle the flushing list processing where we actually emit a flush (i915_gem_flush and i915_retire_commands) instead of in i915_add_request. The code makes IMHO more sense this way (and i915_add_request looses the flush_domains parameter, obviously). * We can avoid emitting unnecessary requests. IMHO there's no point in emitting more than one request per batchbuffer (with or without an corresponding irq). * By enforcing 2. before 1. ordering in the above sequence the seqno argument of i915_gem_object_move_to_active is redundant and can be dropped. v2: Now i915_wait_request issues request if it is not yet emitted. Also introduce i915_gem_next_request_seqno(dev) just in case we ever need to do some prep work before using a new seqno. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [ickle: Keep i915_gem_object_set_to_display_plane() uninterruptible.] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-02-12 04:13:59 +07:00
return -ENOMEM;
ret = i915_add_request(ring, NULL, request);
if (ret) {
kfree(request);
return ret;
}
seqno = request->seqno;
drm/i915: allow lazy emitting of requests Sometimes (like when flushing in preparation of batchbuffer execution) we know that we'll emit a request but haven't yet done so. Allow this case by simply taking the next seqno by default. Ensure that a request is eventually emitted before waiting for an request by issuing it in i915_wait_request iff this is not yet done. Also replace one open-coded version of i915_gem_object_wait_rendering, to prevent future code-diversion. Chris Wilson asked me to explain and clarify what this patch does and why. Here it goes: Old way of moving objects onto the active list and associating them with a reques: 1. i915_add_request + store the returned seqno somewhere 2. i915_gem_object_move_to_active (with the stored seqno as parameter) For the current users, this is all fine. But I'd like to associate objects (and fence regs) with the batchbuffer request deep down in the execbuf call-chain. I thought about three ways of implementing this. a) Don't care, just emit request when we need a new seqno. When heavily pipelining fence reg changes, this would have caused tons of superflous request (and corresponding irqs). b) Thread all changed fences, objects, whatever through the execbuf-maze, so that when we emit a request, we can store the new seqno at all the right places. c) Kill that seqno-threading-around business by simply storing the next seqno, i.e. allow 2. to be done before 1. in the above sequence. I've decided to implement c) (in this patch). The following patches are just fall-out that resulted from this small conceptual change. * We can handle the flushing list processing where we actually emit a flush (i915_gem_flush and i915_retire_commands) instead of in i915_add_request. The code makes IMHO more sense this way (and i915_add_request looses the flush_domains parameter, obviously). * We can avoid emitting unnecessary requests. IMHO there's no point in emitting more than one request per batchbuffer (with or without an corresponding irq). * By enforcing 2. before 1. ordering in the above sequence the seqno argument of i915_gem_object_move_to_active is redundant and can be dropped. v2: Now i915_wait_request issues request if it is not yet emitted. Also introduce i915_gem_next_request_seqno(dev) just in case we ever need to do some prep work before using a new seqno. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [ickle: Keep i915_gem_object_set_to_display_plane() uninterruptible.] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-02-12 04:13:59 +07:00
}
if (!i915_seqno_passed(ring->get_seqno(ring), seqno)) {
if (HAS_PCH_SPLIT(ring->dev))
ier = I915_READ(DEIER) | I915_READ(GTIER);
else if (IS_VALLEYVIEW(ring->dev))
ier = I915_READ(GTIER) | I915_READ(VLV_IER);
else
ier = I915_READ(IER);
if (!ier) {
DRM_ERROR("something (likely vbetool) disabled "
"interrupts, re-enabling\n");
ring->dev->driver->irq_preinstall(ring->dev);
ring->dev->driver->irq_postinstall(ring->dev);
}
trace_i915_gem_request_wait_begin(ring, seqno);
ring->waiting_seqno = seqno;
if (ring->irq_get(ring)) {
if (dev_priv->mm.interruptible)
ret = wait_event_interruptible(ring->irq_queue,
i915_seqno_passed(ring->get_seqno(ring), seqno)
|| atomic_read(&dev_priv->mm.wedged));
else
wait_event(ring->irq_queue,
i915_seqno_passed(ring->get_seqno(ring), seqno)
|| atomic_read(&dev_priv->mm.wedged));
ring->irq_put(ring);
} else if (wait_for_atomic(i915_seqno_passed(ring->get_seqno(ring),
seqno) ||
atomic_read(&dev_priv->mm.wedged), 3000))
ret = -EBUSY;
ring->waiting_seqno = 0;
trace_i915_gem_request_wait_end(ring, seqno);
}
if (atomic_read(&dev_priv->mm.wedged))
ret = -EAGAIN;
/* Directly dispatch request retiring. While we have the work queue
* to handle this, the waiter on a request often wants an associated
* buffer to have made it to the inactive list, and we would need
* a separate wait queue to handle that.
*/
if (ret == 0 && do_retire)
i915_gem_retire_requests_ring(ring);
return ret;
}
/**
* Ensures that all rendering to the object has completed and the object is
* safe to unbind from the GTT or access from the CPU.
*/
int
i915_gem_object_wait_rendering(struct drm_i915_gem_object *obj)
{
int ret;
/* This function only exists to support waiting for existing rendering,
* not for emitting required flushes.
*/
BUG_ON((obj->base.write_domain & I915_GEM_GPU_DOMAINS) != 0);
/* If there is rendering queued on the buffer being evicted, wait for
* it.
*/
if (obj->active) {
ret = i915_wait_request(obj->ring, obj->last_rendering_seqno,
true);
if (ret)
return ret;
}
return 0;
}
/**
* i915_gem_object_sync - sync an object to a ring.
*
* @obj: object which may be in use on another ring.
* @to: ring we wish to use the object on. May be NULL.
*
* This code is meant to abstract object synchronization with the GPU.
* Calling with NULL implies synchronizing the object with the CPU
* rather than a particular GPU ring.
*
* Returns 0 if successful, else propagates up the lower layer error.
*/
int
i915_gem_object_sync(struct drm_i915_gem_object *obj,
struct intel_ring_buffer *to)
{
struct intel_ring_buffer *from = obj->ring;
u32 seqno;
int ret, idx;
if (from == NULL || to == from)
return 0;
if (to == NULL || !i915_semaphore_is_enabled(obj->base.dev))
return i915_gem_object_wait_rendering(obj);
idx = intel_ring_sync_index(from, to);
seqno = obj->last_rendering_seqno;
if (seqno <= from->sync_seqno[idx])
return 0;
if (seqno == from->outstanding_lazy_request) {
struct drm_i915_gem_request *request;
request = kzalloc(sizeof(*request), GFP_KERNEL);
if (request == NULL)
return -ENOMEM;
ret = i915_add_request(from, NULL, request);
if (ret) {
kfree(request);
return ret;
}
seqno = request->seqno;
}
ret = to->sync_to(to, from, seqno);
if (!ret)
from->sync_seqno[idx] = seqno;
return ret;
}
static void i915_gem_object_finish_gtt(struct drm_i915_gem_object *obj)
{
u32 old_write_domain, old_read_domains;
/* Act a barrier for all accesses through the GTT */
mb();
/* Force a pagefault for domain tracking on next user access */
i915_gem_release_mmap(obj);
if ((obj->base.read_domains & I915_GEM_DOMAIN_GTT) == 0)
return;
old_read_domains = obj->base.read_domains;
old_write_domain = obj->base.write_domain;
obj->base.read_domains &= ~I915_GEM_DOMAIN_GTT;
obj->base.write_domain &= ~I915_GEM_DOMAIN_GTT;
trace_i915_gem_object_change_domain(obj,
old_read_domains,
old_write_domain);
}
/**
* Unbinds an object from the GTT aperture.
*/
int
i915_gem_object_unbind(struct drm_i915_gem_object *obj)
{
drm_i915_private_t *dev_priv = obj->base.dev->dev_private;
int ret = 0;
if (obj->gtt_space == NULL)
return 0;
if (obj->pin_count != 0) {
DRM_ERROR("Attempting to unbind pinned buffer\n");
return -EINVAL;
}
ret = i915_gem_object_finish_gpu(obj);
if (ret == -ERESTARTSYS)
return ret;
/* Continue on if we fail due to EIO, the GPU is hung so we
* should be safe and we need to cleanup or else we might
* cause memory corruption through use-after-free.
*/
i915_gem_object_finish_gtt(obj);
/* Move the object to the CPU domain to ensure that
* any possible CPU writes while it's not in the GTT
* are flushed when we go to remap it.
*/
if (ret == 0)
ret = i915_gem_object_set_to_cpu_domain(obj, 1);
if (ret == -ERESTARTSYS)
return ret;
if (ret) {
/* In the event of a disaster, abandon all caches and
* hope for the best.
*/
i915_gem_clflush_object(obj);
obj->base.read_domains = obj->base.write_domain = I915_GEM_DOMAIN_CPU;
}
/* release the fence reg _after_ flushing */
ret = i915_gem_object_put_fence(obj);
if (ret == -ERESTARTSYS)
return ret;
trace_i915_gem_object_unbind(obj);
if (obj->has_global_gtt_mapping)
i915_gem_gtt_unbind_object(obj);
if (obj->has_aliasing_ppgtt_mapping) {
i915_ppgtt_unbind_object(dev_priv->mm.aliasing_ppgtt, obj);
obj->has_aliasing_ppgtt_mapping = 0;
}
i915_gem_gtt_finish_object(obj);
i915_gem_object_put_pages_gtt(obj);
list_del_init(&obj->gtt_list);
list_del_init(&obj->mm_list);
/* Avoid an unnecessary call to unbind on rebind. */
obj->map_and_fenceable = true;
drm_mm_put_block(obj->gtt_space);
obj->gtt_space = NULL;
obj->gtt_offset = 0;
if (i915_gem_object_is_purgeable(obj))
i915_gem_object_truncate(obj);
return ret;
}
int
i915_gem_flush_ring(struct intel_ring_buffer *ring,
uint32_t invalidate_domains,
uint32_t flush_domains)
{
int ret;
if (((invalidate_domains | flush_domains) & I915_GEM_GPU_DOMAINS) == 0)
return 0;
trace_i915_gem_ring_flush(ring, invalidate_domains, flush_domains);
ret = ring->flush(ring, invalidate_domains, flush_domains);
if (ret)
return ret;
if (flush_domains & I915_GEM_GPU_DOMAINS)
i915_gem_process_flushing_list(ring, flush_domains);
return 0;
}
static int i915_ring_idle(struct intel_ring_buffer *ring, bool do_retire)
{
int ret;
if (list_empty(&ring->gpu_write_list) && list_empty(&ring->active_list))
return 0;
if (!list_empty(&ring->gpu_write_list)) {
ret = i915_gem_flush_ring(ring,
I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
if (ret)
return ret;
}
return i915_wait_request(ring, i915_gem_next_request_seqno(ring),
do_retire);
}
int i915_gpu_idle(struct drm_device *dev, bool do_retire)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int ret, i;
/* Flush everything onto the inactive list. */
for (i = 0; i < I915_NUM_RINGS; i++) {
ret = i915_ring_idle(&dev_priv->ring[i], do_retire);
if (ret)
return ret;
}
return 0;
}
static void sandybridge_write_fence_reg(struct drm_device *dev, int reg,
struct drm_i915_gem_object *obj)
{
drm_i915_private_t *dev_priv = dev->dev_private;
uint64_t val;
if (obj) {
u32 size = obj->gtt_space->size;
val = (uint64_t)((obj->gtt_offset + size - 4096) &
0xfffff000) << 32;
val |= obj->gtt_offset & 0xfffff000;
val |= (uint64_t)((obj->stride / 128) - 1) <<
SANDYBRIDGE_FENCE_PITCH_SHIFT;
if (obj->tiling_mode == I915_TILING_Y)
val |= 1 << I965_FENCE_TILING_Y_SHIFT;
val |= I965_FENCE_REG_VALID;
} else
val = 0;
I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + reg * 8, val);
POSTING_READ(FENCE_REG_SANDYBRIDGE_0 + reg * 8);
}
static void i965_write_fence_reg(struct drm_device *dev, int reg,
struct drm_i915_gem_object *obj)
{
drm_i915_private_t *dev_priv = dev->dev_private;
uint64_t val;
if (obj) {
u32 size = obj->gtt_space->size;
val = (uint64_t)((obj->gtt_offset + size - 4096) &
0xfffff000) << 32;
val |= obj->gtt_offset & 0xfffff000;
val |= ((obj->stride / 128) - 1) << I965_FENCE_PITCH_SHIFT;
if (obj->tiling_mode == I915_TILING_Y)
val |= 1 << I965_FENCE_TILING_Y_SHIFT;
val |= I965_FENCE_REG_VALID;
} else
val = 0;
I915_WRITE64(FENCE_REG_965_0 + reg * 8, val);
POSTING_READ(FENCE_REG_965_0 + reg * 8);
}
static void i915_write_fence_reg(struct drm_device *dev, int reg,
struct drm_i915_gem_object *obj)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 val;
if (obj) {
u32 size = obj->gtt_space->size;
int pitch_val;
int tile_width;
WARN((obj->gtt_offset & ~I915_FENCE_START_MASK) ||
(size & -size) != size ||
(obj->gtt_offset & (size - 1)),
"object 0x%08x [fenceable? %d] not 1M or pot-size (0x%08x) aligned\n",
obj->gtt_offset, obj->map_and_fenceable, size);
if (obj->tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))
tile_width = 128;
else
tile_width = 512;
/* Note: pitch better be a power of two tile widths */
pitch_val = obj->stride / tile_width;
pitch_val = ffs(pitch_val) - 1;
val = obj->gtt_offset;
if (obj->tiling_mode == I915_TILING_Y)
val |= 1 << I830_FENCE_TILING_Y_SHIFT;
val |= I915_FENCE_SIZE_BITS(size);
val |= pitch_val << I830_FENCE_PITCH_SHIFT;
val |= I830_FENCE_REG_VALID;
} else
val = 0;
if (reg < 8)
reg = FENCE_REG_830_0 + reg * 4;
else
reg = FENCE_REG_945_8 + (reg - 8) * 4;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
static void i830_write_fence_reg(struct drm_device *dev, int reg,
struct drm_i915_gem_object *obj)
{
drm_i915_private_t *dev_priv = dev->dev_private;
uint32_t val;
if (obj) {
u32 size = obj->gtt_space->size;
uint32_t pitch_val;
WARN((obj->gtt_offset & ~I830_FENCE_START_MASK) ||
(size & -size) != size ||
(obj->gtt_offset & (size - 1)),
"object 0x%08x not 512K or pot-size 0x%08x aligned\n",
obj->gtt_offset, size);
pitch_val = obj->stride / 128;
pitch_val = ffs(pitch_val) - 1;
val = obj->gtt_offset;
if (obj->tiling_mode == I915_TILING_Y)
val |= 1 << I830_FENCE_TILING_Y_SHIFT;
val |= I830_FENCE_SIZE_BITS(size);
val |= pitch_val << I830_FENCE_PITCH_SHIFT;
val |= I830_FENCE_REG_VALID;
} else
val = 0;
I915_WRITE(FENCE_REG_830_0 + reg * 4, val);
POSTING_READ(FENCE_REG_830_0 + reg * 4);
}
static void i915_gem_write_fence(struct drm_device *dev, int reg,
struct drm_i915_gem_object *obj)
{
switch (INTEL_INFO(dev)->gen) {
case 7:
case 6: sandybridge_write_fence_reg(dev, reg, obj); break;
case 5:
case 4: i965_write_fence_reg(dev, reg, obj); break;
case 3: i915_write_fence_reg(dev, reg, obj); break;
case 2: i830_write_fence_reg(dev, reg, obj); break;
default: break;
}
}
static inline int fence_number(struct drm_i915_private *dev_priv,
struct drm_i915_fence_reg *fence)
{
return fence - dev_priv->fence_regs;
}
static void i915_gem_object_update_fence(struct drm_i915_gem_object *obj,
struct drm_i915_fence_reg *fence,
bool enable)
{
struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
int reg = fence_number(dev_priv, fence);
i915_gem_write_fence(obj->base.dev, reg, enable ? obj : NULL);
if (enable) {
obj->fence_reg = reg;
fence->obj = obj;
list_move_tail(&fence->lru_list, &dev_priv->mm.fence_list);
} else {
obj->fence_reg = I915_FENCE_REG_NONE;
fence->obj = NULL;
list_del_init(&fence->lru_list);
}
}
static int
i915_gem_object_flush_fence(struct drm_i915_gem_object *obj)
{
int ret;
if (obj->fenced_gpu_access) {
if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
ret = i915_gem_flush_ring(obj->ring,
0, obj->base.write_domain);
if (ret)
return ret;
}
obj->fenced_gpu_access = false;
}
if (obj->last_fenced_seqno) {
ret = i915_wait_request(obj->ring,
obj->last_fenced_seqno,
true);
if (ret)
return ret;
obj->last_fenced_seqno = 0;
}
/* Ensure that all CPU reads are completed before installing a fence
* and all writes before removing the fence.
*/
if (obj->base.read_domains & I915_GEM_DOMAIN_GTT)
mb();
return 0;
}
int
i915_gem_object_put_fence(struct drm_i915_gem_object *obj)
{
struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
int ret;
ret = i915_gem_object_flush_fence(obj);
if (ret)
return ret;
if (obj->fence_reg == I915_FENCE_REG_NONE)
return 0;
i915_gem_object_update_fence(obj,
&dev_priv->fence_regs[obj->fence_reg],
false);
i915_gem_object_fence_lost(obj);
return 0;
}
static struct drm_i915_fence_reg *
i915_find_fence_reg(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_fence_reg *reg, *avail;
int i;
/* First try to find a free reg */
avail = NULL;
for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
reg = &dev_priv->fence_regs[i];
if (!reg->obj)
return reg;
if (!reg->pin_count)
avail = reg;
}
if (avail == NULL)
return NULL;
/* None available, try to steal one or wait for a user to finish */
list_for_each_entry(reg, &dev_priv->mm.fence_list, lru_list) {
if (reg->pin_count)
continue;
return reg;
}
return NULL;
}
/**
* i915_gem_object_get_fence - set up fencing for an object
* @obj: object to map through a fence reg
*
* When mapping objects through the GTT, userspace wants to be able to write
* to them without having to worry about swizzling if the object is tiled.
* This function walks the fence regs looking for a free one for @obj,
* stealing one if it can't find any.
*
* It then sets up the reg based on the object's properties: address, pitch
* and tiling format.
*
* For an untiled surface, this removes any existing fence.
*/
int
i915_gem_object_get_fence(struct drm_i915_gem_object *obj)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_fence_reg *reg;
int ret;
if (obj->tiling_mode == I915_TILING_NONE)
return i915_gem_object_put_fence(obj);
/* Just update our place in the LRU if our fence is getting reused. */
if (obj->fence_reg != I915_FENCE_REG_NONE) {
reg = &dev_priv->fence_regs[obj->fence_reg];
list_move_tail(&reg->lru_list, &dev_priv->mm.fence_list);
if (obj->tiling_changed) {
ret = i915_gem_object_flush_fence(obj);
if (ret)
return ret;
goto update;
}
return 0;
}
reg = i915_find_fence_reg(dev);
if (reg == NULL)
return -EDEADLK;
ret = i915_gem_object_flush_fence(obj);
if (ret)
return ret;
if (reg->obj) {
struct drm_i915_gem_object *old = reg->obj;
drm_gem_object_reference(&old->base);
if (old->tiling_mode)
i915_gem_release_mmap(old);
ret = i915_gem_object_flush_fence(old);
if (ret) {
drm_gem_object_unreference(&old->base);
return ret;
}
old->fence_reg = I915_FENCE_REG_NONE;
old->last_fenced_seqno = 0;
drm_gem_object_unreference(&old->base);
}
reg->obj = obj;
list_move_tail(&reg->lru_list, &dev_priv->mm.fence_list);
obj->fence_reg = reg - dev_priv->fence_regs;
update:
obj->tiling_changed = false;
i915_gem_write_fence(dev, reg - dev_priv->fence_regs, obj);
return 0;
}
/**
* Finds free space in the GTT aperture and binds the object there.
*/
static int
i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
unsigned alignment,
bool map_and_fenceable)
{
struct drm_device *dev = obj->base.dev;
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_mm_node *free_space;
gfp_t gfpmask = __GFP_NORETRY | __GFP_NOWARN;
u32 size, fence_size, fence_alignment, unfenced_alignment;
bool mappable, fenceable;
int ret;
if (obj->madv != I915_MADV_WILLNEED) {
DRM_ERROR("Attempting to bind a purgeable object\n");
return -EINVAL;
}
fence_size = i915_gem_get_gtt_size(dev,
obj->base.size,
obj->tiling_mode);
fence_alignment = i915_gem_get_gtt_alignment(dev,
obj->base.size,
obj->tiling_mode);
unfenced_alignment =
i915_gem_get_unfenced_gtt_alignment(dev,
obj->base.size,
obj->tiling_mode);
if (alignment == 0)
alignment = map_and_fenceable ? fence_alignment :
unfenced_alignment;
if (map_and_fenceable && alignment & (fence_alignment - 1)) {
DRM_ERROR("Invalid object alignment requested %u\n", alignment);
return -EINVAL;
}
size = map_and_fenceable ? fence_size : obj->base.size;
/* If the object is bigger than the entire aperture, reject it early
* before evicting everything in a vain attempt to find space.
*/
if (obj->base.size >
(map_and_fenceable ? dev_priv->mm.gtt_mappable_end : dev_priv->mm.gtt_total)) {
DRM_ERROR("Attempting to bind an object larger than the aperture\n");
return -E2BIG;
}
search_free:
if (map_and_fenceable)
free_space =
drm_mm_search_free_in_range(&dev_priv->mm.gtt_space,
size, alignment, 0,
dev_priv->mm.gtt_mappable_end,
0);
else
free_space = drm_mm_search_free(&dev_priv->mm.gtt_space,
size, alignment, 0);
if (free_space != NULL) {
if (map_and_fenceable)
obj->gtt_space =
drm_mm_get_block_range_generic(free_space,
size, alignment, 0,
dev_priv->mm.gtt_mappable_end,
0);
else
obj->gtt_space =
drm_mm_get_block(free_space, size, alignment);
}
if (obj->gtt_space == NULL) {
/* If the gtt is empty and we're still having trouble
* fitting our object in, we're out of memory.
*/
ret = i915_gem_evict_something(dev, size, alignment,
map_and_fenceable);
if (ret)
return ret;
goto search_free;
}
ret = i915_gem_object_get_pages_gtt(obj, gfpmask);
if (ret) {
drm_mm_put_block(obj->gtt_space);
obj->gtt_space = NULL;
if (ret == -ENOMEM) {
/* first try to reclaim some memory by clearing the GTT */
ret = i915_gem_evict_everything(dev, false);
if (ret) {
/* now try to shrink everyone else */
if (gfpmask) {
gfpmask = 0;
goto search_free;
}
return -ENOMEM;
}
goto search_free;
}
return ret;
}
ret = i915_gem_gtt_prepare_object(obj);
if (ret) {
i915_gem_object_put_pages_gtt(obj);
drm_mm_put_block(obj->gtt_space);
obj->gtt_space = NULL;
if (i915_gem_evict_everything(dev, false))
return ret;
goto search_free;
}
if (!dev_priv->mm.aliasing_ppgtt)
i915_gem_gtt_bind_object(obj, obj->cache_level);
list_add_tail(&obj->gtt_list, &dev_priv->mm.gtt_list);
list_add_tail(&obj->mm_list, &dev_priv->mm.inactive_list);
/* Assert that the object is not currently in any GPU domain. As it
* wasn't in the GTT, there shouldn't be any way it could have been in
* a GPU cache
*/
BUG_ON(obj->base.read_domains & I915_GEM_GPU_DOMAINS);
BUG_ON(obj->base.write_domain & I915_GEM_GPU_DOMAINS);
obj->gtt_offset = obj->gtt_space->start;
fenceable =
obj->gtt_space->size == fence_size &&
(obj->gtt_space->start & (fence_alignment - 1)) == 0;
mappable =
obj->gtt_offset + obj->base.size <= dev_priv->mm.gtt_mappable_end;
obj->map_and_fenceable = mappable && fenceable;
trace_i915_gem_object_bind(obj, map_and_fenceable);
return 0;
}
void
i915_gem_clflush_object(struct drm_i915_gem_object *obj)
{
/* If we don't have a page list set up, then we're not pinned
* to GPU, and we can ignore the cache flush because it'll happen
* again at bind time.
*/
if (obj->pages == NULL)
return;
/* If the GPU is snooping the contents of the CPU cache,
* we do not need to manually clear the CPU cache lines. However,
* the caches are only snooped when the render cache is
* flushed/invalidated. As we always have to emit invalidations
* and flushes when moving into and out of the RENDER domain, correct
* snooping behaviour occurs naturally as the result of our domain
* tracking.
*/
if (obj->cache_level != I915_CACHE_NONE)
return;
trace_i915_gem_object_clflush(obj);
drm_clflush_pages(obj->pages, obj->base.size / PAGE_SIZE);
}
/** Flushes any GPU write domain for the object if it's dirty. */
static int
i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj)
{
if ((obj->base.write_domain & I915_GEM_GPU_DOMAINS) == 0)
return 0;
/* Queue the GPU write cache flushing we need. */
return i915_gem_flush_ring(obj->ring, 0, obj->base.write_domain);
}
/** Flushes the GTT write domain for the object if it's dirty. */
static void
i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj)
{
uint32_t old_write_domain;
if (obj->base.write_domain != I915_GEM_DOMAIN_GTT)
return;
/* No actual flushing is required for the GTT write domain. Writes
* to it immediately go to main memory as far as we know, so there's
* no chipset flush. It also doesn't land in render cache.
*
* However, we do have to enforce the order so that all writes through
* the GTT land before any writes to the device, such as updates to
* the GATT itself.
*/
wmb();
old_write_domain = obj->base.write_domain;
obj->base.write_domain = 0;
trace_i915_gem_object_change_domain(obj,
obj->base.read_domains,
old_write_domain);
}
/** Flushes the CPU write domain for the object if it's dirty. */
static void
i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj)
{
uint32_t old_write_domain;
if (obj->base.write_domain != I915_GEM_DOMAIN_CPU)
return;
i915_gem_clflush_object(obj);
intel_gtt_chipset_flush();
old_write_domain = obj->base.write_domain;
obj->base.write_domain = 0;
trace_i915_gem_object_change_domain(obj,
obj->base.read_domains,
old_write_domain);
}
/**
* Moves a single object to the GTT read, and possibly write domain.
*
* This function returns when the move is complete, including waiting on
* flushes to occur.
*/
int
i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj, bool write)
{
uint32_t old_write_domain, old_read_domains;
int ret;
/* Not valid to be called on unbound objects. */
if (obj->gtt_space == NULL)
return -EINVAL;
if (obj->base.write_domain == I915_GEM_DOMAIN_GTT)
return 0;
ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret)
return ret;
if (obj->pending_gpu_write || write) {
ret = i915_gem_object_wait_rendering(obj);
if (ret)
return ret;
}
i915_gem_object_flush_cpu_write_domain(obj);
old_write_domain = obj->base.write_domain;
old_read_domains = obj->base.read_domains;
/* It should now be out of any other write domains, and we can update
* the domain values for our changes.
*/
BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
obj->base.read_domains |= I915_GEM_DOMAIN_GTT;
if (write) {
obj->base.read_domains = I915_GEM_DOMAIN_GTT;
obj->base.write_domain = I915_GEM_DOMAIN_GTT;
obj->dirty = 1;
}
trace_i915_gem_object_change_domain(obj,
old_read_domains,
old_write_domain);
return 0;
}
int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj,
enum i915_cache_level cache_level)
{
struct drm_device *dev = obj->base.dev;
drm_i915_private_t *dev_priv = dev->dev_private;
int ret;
if (obj->cache_level == cache_level)
return 0;
if (obj->pin_count) {
DRM_DEBUG("can not change the cache level of pinned objects\n");
return -EBUSY;
}
if (obj->gtt_space) {
ret = i915_gem_object_finish_gpu(obj);
if (ret)
return ret;
i915_gem_object_finish_gtt(obj);
/* Before SandyBridge, you could not use tiling or fence
* registers with snooped memory, so relinquish any fences
* currently pointing to our region in the aperture.
*/
if (INTEL_INFO(obj->base.dev)->gen < 6) {
ret = i915_gem_object_put_fence(obj);
if (ret)
return ret;
}
if (obj->has_global_gtt_mapping)
i915_gem_gtt_bind_object(obj, cache_level);
if (obj->has_aliasing_ppgtt_mapping)
i915_ppgtt_bind_object(dev_priv->mm.aliasing_ppgtt,
obj, cache_level);
}
if (cache_level == I915_CACHE_NONE) {
u32 old_read_domains, old_write_domain;
/* If we're coming from LLC cached, then we haven't
* actually been tracking whether the data is in the
* CPU cache or not, since we only allow one bit set
* in obj->write_domain and have been skipping the clflushes.
* Just set it to the CPU cache for now.
*/
WARN_ON(obj->base.write_domain & ~I915_GEM_DOMAIN_CPU);
WARN_ON(obj->base.read_domains & ~I915_GEM_DOMAIN_CPU);
old_read_domains = obj->base.read_domains;
old_write_domain = obj->base.write_domain;
obj->base.read_domains = I915_GEM_DOMAIN_CPU;
obj->base.write_domain = I915_GEM_DOMAIN_CPU;
trace_i915_gem_object_change_domain(obj,
old_read_domains,
old_write_domain);
}
obj->cache_level = cache_level;
return 0;
}
/*
* Prepare buffer for display plane (scanout, cursors, etc).
* Can be called from an uninterruptible phase (modesetting) and allows
* any flushes to be pipelined (for pageflips).
*/
int
i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
u32 alignment,
struct intel_ring_buffer *pipelined)
{
u32 old_read_domains, old_write_domain;
int ret;
ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret)
return ret;
if (pipelined != obj->ring) {
ret = i915_gem_object_sync(obj, pipelined);
if (ret)
return ret;
}
/* The display engine is not coherent with the LLC cache on gen6. As
* a result, we make sure that the pinning that is about to occur is
* done with uncached PTEs. This is lowest common denominator for all
* chipsets.
*
* However for gen6+, we could do better by using the GFDT bit instead
* of uncaching, which would allow us to flush all the LLC-cached data
* with that bit in the PTE to main memory with just one PIPE_CONTROL.
*/
ret = i915_gem_object_set_cache_level(obj, I915_CACHE_NONE);
if (ret)
return ret;
/* As the user may map the buffer once pinned in the display plane
* (e.g. libkms for the bootup splash), we have to ensure that we
* always use map_and_fenceable for all scanout buffers.
*/
ret = i915_gem_object_pin(obj, alignment, true);
if (ret)
return ret;
i915_gem_object_flush_cpu_write_domain(obj);
old_write_domain = obj->base.write_domain;
old_read_domains = obj->base.read_domains;
/* It should now be out of any other write domains, and we can update
* the domain values for our changes.
*/
BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
obj->base.read_domains |= I915_GEM_DOMAIN_GTT;
trace_i915_gem_object_change_domain(obj,
old_read_domains,
old_write_domain);
return 0;
}
int
i915_gem_object_finish_gpu(struct drm_i915_gem_object *obj)
{
int ret;
if ((obj->base.read_domains & I915_GEM_GPU_DOMAINS) == 0)
return 0;
if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
ret = i915_gem_flush_ring(obj->ring, 0, obj->base.write_domain);
if (ret)
return ret;
}
ret = i915_gem_object_wait_rendering(obj);
if (ret)
return ret;
/* Ensure that we invalidate the GPU's caches and TLBs. */
obj->base.read_domains &= ~I915_GEM_GPU_DOMAINS;
return 0;
}
/**
* Moves a single object to the CPU read, and possibly write domain.
*
* This function returns when the move is complete, including waiting on
* flushes to occur.
*/
int
i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write)
{
uint32_t old_write_domain, old_read_domains;
int ret;
if (obj->base.write_domain == I915_GEM_DOMAIN_CPU)
return 0;
ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret)
return ret;
if (write || obj->pending_gpu_write) {
ret = i915_gem_object_wait_rendering(obj);
if (ret)
return ret;
}
i915_gem_object_flush_gtt_write_domain(obj);
old_write_domain = obj->base.write_domain;
old_read_domains = obj->base.read_domains;
/* Flush the CPU cache if it's still invalid. */
if ((obj->base.read_domains & I915_GEM_DOMAIN_CPU) == 0) {
i915_gem_clflush_object(obj);
obj->base.read_domains |= I915_GEM_DOMAIN_CPU;
}
/* It should now be out of any other write domains, and we can update
* the domain values for our changes.
*/
BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
/* If we're writing through the CPU, then the GPU read domains will
* need to be invalidated at next use.
*/
if (write) {
obj->base.read_domains = I915_GEM_DOMAIN_CPU;
obj->base.write_domain = I915_GEM_DOMAIN_CPU;
}
trace_i915_gem_object_change_domain(obj,
old_read_domains,
old_write_domain);
return 0;
}
/* Throttle our rendering by waiting until the ring has completed our requests
* emitted over 20 msec ago.
*
* Note that if we were to use the current jiffies each time around the loop,
* we wouldn't escape the function with any frames outstanding if the time to
* render a frame was over 20ms.
*
* This should get us reasonable parallelism between CPU and GPU but also
* relatively low latency when blocking on a particular request to finish.
*/
static int
i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_file_private *file_priv = file->driver_priv;
unsigned long recent_enough = jiffies - msecs_to_jiffies(20);
struct drm_i915_gem_request *request;
struct intel_ring_buffer *ring = NULL;
u32 seqno = 0;
int ret;
if (atomic_read(&dev_priv->mm.wedged))
return -EIO;
spin_lock(&file_priv->mm.lock);
list_for_each_entry(request, &file_priv->mm.request_list, client_list) {
if (time_after_eq(request->emitted_jiffies, recent_enough))
break;
ring = request->ring;
seqno = request->seqno;
}
spin_unlock(&file_priv->mm.lock);
if (seqno == 0)
return 0;
ret = 0;
if (!i915_seqno_passed(ring->get_seqno(ring), seqno)) {
/* And wait for the seqno passing without holding any locks and
* causing extra latency for others. This is safe as the irq
* generation is designed to be run atomically and so is
* lockless.
*/
if (ring->irq_get(ring)) {
ret = wait_event_interruptible(ring->irq_queue,
i915_seqno_passed(ring->get_seqno(ring), seqno)
|| atomic_read(&dev_priv->mm.wedged));
ring->irq_put(ring);
if (ret == 0 && atomic_read(&dev_priv->mm.wedged))
ret = -EIO;
} else if (wait_for_atomic(i915_seqno_passed(ring->get_seqno(ring),
seqno) ||
atomic_read(&dev_priv->mm.wedged), 3000)) {
ret = -EBUSY;
}
}
if (ret == 0)
queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, 0);
return ret;
}
int
i915_gem_object_pin(struct drm_i915_gem_object *obj,
uint32_t alignment,
bool map_and_fenceable)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
BUG_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT);
WARN_ON(i915_verify_lists(dev));
if (obj->gtt_space != NULL) {
if ((alignment && obj->gtt_offset & (alignment - 1)) ||
(map_and_fenceable && !obj->map_and_fenceable)) {
WARN(obj->pin_count,
"bo is already pinned with incorrect alignment:"
" offset=%x, req.alignment=%x, req.map_and_fenceable=%d,"
" obj->map_and_fenceable=%d\n",
obj->gtt_offset, alignment,
map_and_fenceable,
obj->map_and_fenceable);
ret = i915_gem_object_unbind(obj);
if (ret)
return ret;
}
}
if (obj->gtt_space == NULL) {
ret = i915_gem_object_bind_to_gtt(obj, alignment,
map_and_fenceable);
if (ret)
return ret;
}
if (!obj->has_global_gtt_mapping && map_and_fenceable)
i915_gem_gtt_bind_object(obj, obj->cache_level);
if (obj->pin_count++ == 0) {
if (!obj->active)
list_move_tail(&obj->mm_list,
&dev_priv->mm.pinned_list);
}
obj->pin_mappable |= map_and_fenceable;
WARN_ON(i915_verify_lists(dev));
return 0;
}
void
i915_gem_object_unpin(struct drm_i915_gem_object *obj)
{
struct drm_device *dev = obj->base.dev;
drm_i915_private_t *dev_priv = dev->dev_private;
WARN_ON(i915_verify_lists(dev));
BUG_ON(obj->pin_count == 0);
BUG_ON(obj->gtt_space == NULL);
if (--obj->pin_count == 0) {
if (!obj->active)
list_move_tail(&obj->mm_list,
&dev_priv->mm.inactive_list);
obj->pin_mappable = false;
}
WARN_ON(i915_verify_lists(dev));
}
int
i915_gem_pin_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_pin *args = data;
struct drm_i915_gem_object *obj;
int ret;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
if (&obj->base == NULL) {
ret = -ENOENT;
goto unlock;
}
if (obj->madv != I915_MADV_WILLNEED) {
DRM_ERROR("Attempting to pin a purgeable buffer\n");
ret = -EINVAL;
goto out;
}
if (obj->pin_filp != NULL && obj->pin_filp != file) {
DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n",
args->handle);
ret = -EINVAL;
goto out;
}
obj->user_pin_count++;
obj->pin_filp = file;
if (obj->user_pin_count == 1) {
ret = i915_gem_object_pin(obj, args->alignment, true);
if (ret)
goto out;
}
/* XXX - flush the CPU caches for pinned objects
* as the X server doesn't manage domains yet
*/
i915_gem_object_flush_cpu_write_domain(obj);
args->offset = obj->gtt_offset;
out:
drm_gem_object_unreference(&obj->base);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
int
i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_pin *args = data;
struct drm_i915_gem_object *obj;
int ret;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
if (&obj->base == NULL) {
ret = -ENOENT;
goto unlock;
}
if (obj->pin_filp != file) {
DRM_ERROR("Not pinned by caller in i915_gem_pin_ioctl(): %d\n",
args->handle);
ret = -EINVAL;
goto out;
}
obj->user_pin_count--;
if (obj->user_pin_count == 0) {
obj->pin_filp = NULL;
i915_gem_object_unpin(obj);
}
out:
drm_gem_object_unreference(&obj->base);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
int
i915_gem_busy_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_busy *args = data;
struct drm_i915_gem_object *obj;
int ret;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
if (&obj->base == NULL) {
ret = -ENOENT;
goto unlock;
}
/* Count all active objects as busy, even if they are currently not used
* by the gpu. Users of this interface expect objects to eventually
* become non-busy without any further actions, therefore emit any
* necessary flushes here.
*/
args->busy = obj->active;
if (args->busy) {
/* Unconditionally flush objects, even when the gpu still uses this
* object. Userspace calling this function indicates that it wants to
* use this buffer rather sooner than later, so issuing the required
* flush earlier is beneficial.
*/
if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
ret = i915_gem_flush_ring(obj->ring,
0, obj->base.write_domain);
} else if (obj->ring->outstanding_lazy_request ==
obj->last_rendering_seqno) {
struct drm_i915_gem_request *request;
/* This ring is not being cleared by active usage,
* so emit a request to do so.
*/
request = kzalloc(sizeof(*request), GFP_KERNEL);
if (request) {
ret = i915_add_request(obj->ring, NULL, request);
if (ret)
kfree(request);
} else
ret = -ENOMEM;
}
/* Update the active list for the hardware's current position.
* Otherwise this only updates on a delayed timer or when irqs
* are actually unmasked, and our working set ends up being
* larger than required.
*/
i915_gem_retire_requests_ring(obj->ring);
args->busy = obj->active;
}
drm_gem_object_unreference(&obj->base);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
int
i915_gem_throttle_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
return i915_gem_ring_throttle(dev, file_priv);
}
int
i915_gem_madvise_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_i915_gem_madvise *args = data;
struct drm_i915_gem_object *obj;
int ret;
switch (args->madv) {
case I915_MADV_DONTNEED:
case I915_MADV_WILLNEED:
break;
default:
return -EINVAL;
}
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = to_intel_bo(drm_gem_object_lookup(dev, file_priv, args->handle));
if (&obj->base == NULL) {
ret = -ENOENT;
goto unlock;
}
if (obj->pin_count) {
ret = -EINVAL;
goto out;
}
if (obj->madv != __I915_MADV_PURGED)
obj->madv = args->madv;
/* if the object is no longer bound, discard its backing storage */
if (i915_gem_object_is_purgeable(obj) &&
obj->gtt_space == NULL)
i915_gem_object_truncate(obj);
args->retained = obj->madv != __I915_MADV_PURGED;
out:
drm_gem_object_unreference(&obj->base);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
size_t size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj;
struct address_space *mapping;
obj = kzalloc(sizeof(*obj), GFP_KERNEL);
if (obj == NULL)
return NULL;
if (drm_gem_object_init(dev, &obj->base, size) != 0) {
kfree(obj);
return NULL;
}
mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
mapping_set_gfp_mask(mapping, GFP_HIGHUSER | __GFP_RECLAIMABLE);
i915_gem_info_add_obj(dev_priv, size);
obj->base.write_domain = I915_GEM_DOMAIN_CPU;
obj->base.read_domains = I915_GEM_DOMAIN_CPU;
if (HAS_LLC(dev)) {
/* On some devices, we can have the GPU use the LLC (the CPU
* cache) for about a 10% performance improvement
* compared to uncached. Graphics requests other than
* display scanout are coherent with the CPU in
* accessing this cache. This means in this mode we
* don't need to clflush on the CPU side, and on the
* GPU side we only need to flush internal caches to
* get data visible to the CPU.
*
* However, we maintain the display planes as UC, and so
* need to rebind when first used as such.
*/
obj->cache_level = I915_CACHE_LLC;
} else
obj->cache_level = I915_CACHE_NONE;
obj->base.driver_private = NULL;
obj->fence_reg = I915_FENCE_REG_NONE;
INIT_LIST_HEAD(&obj->mm_list);
INIT_LIST_HEAD(&obj->gtt_list);
INIT_LIST_HEAD(&obj->ring_list);
INIT_LIST_HEAD(&obj->exec_list);
INIT_LIST_HEAD(&obj->gpu_write_list);
obj->madv = I915_MADV_WILLNEED;
/* Avoid an unnecessary call to unbind on the first bind. */
obj->map_and_fenceable = true;
return obj;
}
int i915_gem_init_object(struct drm_gem_object *obj)
{
BUG();
return 0;
}
static void i915_gem_free_object_tail(struct drm_i915_gem_object *obj)
{
struct drm_device *dev = obj->base.dev;
drm_i915_private_t *dev_priv = dev->dev_private;
int ret;
ret = i915_gem_object_unbind(obj);
if (ret == -ERESTARTSYS) {
list_move(&obj->mm_list,
&dev_priv->mm.deferred_free_list);
return;
}
trace_i915_gem_object_destroy(obj);
if (obj->base.map_list.map)
drm_gem_free_mmap_offset(&obj->base);
drm_gem_object_release(&obj->base);
i915_gem_info_remove_obj(dev_priv, obj->base.size);
kfree(obj->bit_17);
kfree(obj);
}
void i915_gem_free_object(struct drm_gem_object *gem_obj)
{
struct drm_i915_gem_object *obj = to_intel_bo(gem_obj);
struct drm_device *dev = obj->base.dev;
while (obj->pin_count > 0)
i915_gem_object_unpin(obj);
if (obj->phys_obj)
i915_gem_detach_phys_object(dev, obj);
i915_gem_free_object_tail(obj);
}
int
i915_gem_idle(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int ret;
mutex_lock(&dev->struct_mutex);
if (dev_priv->mm.suspended) {
mutex_unlock(&dev->struct_mutex);
return 0;
}
ret = i915_gpu_idle(dev, true);
if (ret) {
mutex_unlock(&dev->struct_mutex);
return ret;
}
/* Under UMS, be paranoid and evict. */
if (!drm_core_check_feature(dev, DRIVER_MODESET)) {
ret = i915_gem_evict_inactive(dev, false);
if (ret) {
mutex_unlock(&dev->struct_mutex);
return ret;
}
}
i915_gem_reset_fences(dev);
/* Hack! Don't let anybody do execbuf while we don't control the chip.
* We need to replace this with a semaphore, or something.
* And not confound mm.suspended!
*/
dev_priv->mm.suspended = 1;
del_timer_sync(&dev_priv->hangcheck_timer);
i915_kernel_lost_context(dev);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
/* Cancel the retire work handler, which should be idle now. */
cancel_delayed_work_sync(&dev_priv->mm.retire_work);
return 0;
}
void i915_gem_init_swizzling(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
if (INTEL_INFO(dev)->gen < 5 ||
dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_NONE)
return;
I915_WRITE(DISP_ARB_CTL, I915_READ(DISP_ARB_CTL) |
DISP_TILE_SURFACE_SWIZZLING);
if (IS_GEN5(dev))
return;
I915_WRITE(TILECTL, I915_READ(TILECTL) | TILECTL_SWZCTL);
if (IS_GEN6(dev))
I915_WRITE(ARB_MODE, ARB_MODE_ENABLE(ARB_MODE_SWIZZLE_SNB));
else
I915_WRITE(ARB_MODE, ARB_MODE_ENABLE(ARB_MODE_SWIZZLE_IVB));
}
void i915_gem_init_ppgtt(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
uint32_t pd_offset;
struct intel_ring_buffer *ring;
struct i915_hw_ppgtt *ppgtt = dev_priv->mm.aliasing_ppgtt;
uint32_t __iomem *pd_addr;
uint32_t pd_entry;
int i;
if (!dev_priv->mm.aliasing_ppgtt)
return;
pd_addr = dev_priv->mm.gtt->gtt + ppgtt->pd_offset/sizeof(uint32_t);
for (i = 0; i < ppgtt->num_pd_entries; i++) {
dma_addr_t pt_addr;
if (dev_priv->mm.gtt->needs_dmar)
pt_addr = ppgtt->pt_dma_addr[i];
else
pt_addr = page_to_phys(ppgtt->pt_pages[i]);
pd_entry = GEN6_PDE_ADDR_ENCODE(pt_addr);
pd_entry |= GEN6_PDE_VALID;
writel(pd_entry, pd_addr + i);
}
readl(pd_addr);
pd_offset = ppgtt->pd_offset;
pd_offset /= 64; /* in cachelines, */
pd_offset <<= 16;
if (INTEL_INFO(dev)->gen == 6) {
uint32_t ecochk, gab_ctl, ecobits;
ecobits = I915_READ(GAC_ECO_BITS);
I915_WRITE(GAC_ECO_BITS, ecobits | ECOBITS_PPGTT_CACHE64B);
gab_ctl = I915_READ(GAB_CTL);
I915_WRITE(GAB_CTL, gab_ctl | GAB_CTL_CONT_AFTER_PAGEFAULT);
ecochk = I915_READ(GAM_ECOCHK);
I915_WRITE(GAM_ECOCHK, ecochk | ECOCHK_SNB_BIT |
ECOCHK_PPGTT_CACHE64B);
I915_WRITE(GFX_MODE, GFX_MODE_ENABLE(GFX_PPGTT_ENABLE));
} else if (INTEL_INFO(dev)->gen >= 7) {
I915_WRITE(GAM_ECOCHK, ECOCHK_PPGTT_CACHE64B);
/* GFX_MODE is per-ring on gen7+ */
}
for (i = 0; i < I915_NUM_RINGS; i++) {
ring = &dev_priv->ring[i];
if (INTEL_INFO(dev)->gen >= 7)
I915_WRITE(RING_MODE_GEN7(ring),
GFX_MODE_ENABLE(GFX_PPGTT_ENABLE));
I915_WRITE(RING_PP_DIR_DCLV(ring), PP_DIR_DCLV_2G);
I915_WRITE(RING_PP_DIR_BASE(ring), pd_offset);
}
}
int
i915_gem_init_hw(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int ret;
i915_gem_init_swizzling(dev);
ret = intel_init_render_ring_buffer(dev);
if (ret)
return ret;
if (HAS_BSD(dev)) {
ret = intel_init_bsd_ring_buffer(dev);
if (ret)
goto cleanup_render_ring;
}
if (HAS_BLT(dev)) {
ret = intel_init_blt_ring_buffer(dev);
if (ret)
goto cleanup_bsd_ring;
}
dev_priv->next_seqno = 1;
i915_gem_init_ppgtt(dev);
return 0;
cleanup_bsd_ring:
intel_cleanup_ring_buffer(&dev_priv->ring[VCS]);
cleanup_render_ring:
intel_cleanup_ring_buffer(&dev_priv->ring[RCS]);
return ret;
}
void
i915_gem_cleanup_ringbuffer(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int i;
for (i = 0; i < I915_NUM_RINGS; i++)
intel_cleanup_ring_buffer(&dev_priv->ring[i]);
}
int
i915_gem_entervt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int ret, i;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return 0;
if (atomic_read(&dev_priv->mm.wedged)) {
DRM_ERROR("Reenabling wedged hardware, good luck\n");
atomic_set(&dev_priv->mm.wedged, 0);
}
mutex_lock(&dev->struct_mutex);
dev_priv->mm.suspended = 0;
ret = i915_gem_init_hw(dev);
if (ret != 0) {
mutex_unlock(&dev->struct_mutex);
return ret;
}
BUG_ON(!list_empty(&dev_priv->mm.active_list));
BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
for (i = 0; i < I915_NUM_RINGS; i++) {
BUG_ON(!list_empty(&dev_priv->ring[i].active_list));
BUG_ON(!list_empty(&dev_priv->ring[i].request_list));
}
mutex_unlock(&dev->struct_mutex);
ret = drm_irq_install(dev);
if (ret)
goto cleanup_ringbuffer;
return 0;
cleanup_ringbuffer:
mutex_lock(&dev->struct_mutex);
i915_gem_cleanup_ringbuffer(dev);
dev_priv->mm.suspended = 1;
mutex_unlock(&dev->struct_mutex);
return ret;
}
int
i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
if (drm_core_check_feature(dev, DRIVER_MODESET))
return 0;
drm_irq_uninstall(dev);
return i915_gem_idle(dev);
}
void
i915_gem_lastclose(struct drm_device *dev)
{
int ret;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
ret = i915_gem_idle(dev);
if (ret)
DRM_ERROR("failed to idle hardware: %d\n", ret);
}
static void
init_ring_lists(struct intel_ring_buffer *ring)
{
INIT_LIST_HEAD(&ring->active_list);
INIT_LIST_HEAD(&ring->request_list);
INIT_LIST_HEAD(&ring->gpu_write_list);
}
void
i915_gem_load(struct drm_device *dev)
{
int i;
drm_i915_private_t *dev_priv = dev->dev_private;
INIT_LIST_HEAD(&dev_priv->mm.active_list);
INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
INIT_LIST_HEAD(&dev_priv->mm.pinned_list);
INIT_LIST_HEAD(&dev_priv->mm.fence_list);
INIT_LIST_HEAD(&dev_priv->mm.deferred_free_list);
INIT_LIST_HEAD(&dev_priv->mm.gtt_list);
for (i = 0; i < I915_NUM_RINGS; i++)
init_ring_lists(&dev_priv->ring[i]);
for (i = 0; i < I915_MAX_NUM_FENCES; i++)
INIT_LIST_HEAD(&dev_priv->fence_regs[i].lru_list);
INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
i915_gem_retire_work_handler);
init_completion(&dev_priv->error_completion);
/* On GEN3 we really need to make sure the ARB C3 LP bit is set */
if (IS_GEN3(dev)) {
u32 tmp = I915_READ(MI_ARB_STATE);
if (!(tmp & MI_ARB_C3_LP_WRITE_ENABLE)) {
/* arb state is a masked write, so set bit + bit in mask */
tmp = MI_ARB_C3_LP_WRITE_ENABLE | (MI_ARB_C3_LP_WRITE_ENABLE << MI_ARB_MASK_SHIFT);
I915_WRITE(MI_ARB_STATE, tmp);
}
}
dev_priv->relative_constants_mode = I915_EXEC_CONSTANTS_REL_GENERAL;
/* Old X drivers will take 0-2 for front, back, depth buffers */
if (!drm_core_check_feature(dev, DRIVER_MODESET))
dev_priv->fence_reg_start = 3;
if (INTEL_INFO(dev)->gen >= 4 || IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
dev_priv->num_fence_regs = 16;
else
dev_priv->num_fence_regs = 8;
/* Initialize fence registers to zero */
i915_gem_reset_fences(dev);
i915_gem_detect_bit_6_swizzle(dev);
init_waitqueue_head(&dev_priv->pending_flip_queue);
dev_priv->mm.interruptible = true;
dev_priv->mm.inactive_shrinker.shrink = i915_gem_inactive_shrink;
dev_priv->mm.inactive_shrinker.seeks = DEFAULT_SEEKS;
register_shrinker(&dev_priv->mm.inactive_shrinker);
}
/*
* Create a physically contiguous memory object for this object
* e.g. for cursor + overlay regs
*/
static int i915_gem_init_phys_object(struct drm_device *dev,
int id, int size, int align)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_phys_object *phys_obj;
int ret;
if (dev_priv->mm.phys_objs[id - 1] || !size)
return 0;
phys_obj = kzalloc(sizeof(struct drm_i915_gem_phys_object), GFP_KERNEL);
if (!phys_obj)
return -ENOMEM;
phys_obj->id = id;
phys_obj->handle = drm_pci_alloc(dev, size, align);
if (!phys_obj->handle) {
ret = -ENOMEM;
goto kfree_obj;
}
#ifdef CONFIG_X86
set_memory_wc((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE);
#endif
dev_priv->mm.phys_objs[id - 1] = phys_obj;
return 0;
kfree_obj:
kfree(phys_obj);
return ret;
}
static void i915_gem_free_phys_object(struct drm_device *dev, int id)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_phys_object *phys_obj;
if (!dev_priv->mm.phys_objs[id - 1])
return;
phys_obj = dev_priv->mm.phys_objs[id - 1];
if (phys_obj->cur_obj) {
i915_gem_detach_phys_object(dev, phys_obj->cur_obj);
}
#ifdef CONFIG_X86
set_memory_wb((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE);
#endif
drm_pci_free(dev, phys_obj->handle);
kfree(phys_obj);
dev_priv->mm.phys_objs[id - 1] = NULL;
}
void i915_gem_free_all_phys_object(struct drm_device *dev)
{
int i;
for (i = I915_GEM_PHYS_CURSOR_0; i <= I915_MAX_PHYS_OBJECT; i++)
i915_gem_free_phys_object(dev, i);
}
void i915_gem_detach_phys_object(struct drm_device *dev,
struct drm_i915_gem_object *obj)
{
struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
char *vaddr;
int i;
int page_count;
if (!obj->phys_obj)
return;
vaddr = obj->phys_obj->handle->vaddr;
page_count = obj->base.size / PAGE_SIZE;
for (i = 0; i < page_count; i++) {
struct page *page = shmem_read_mapping_page(mapping, i);
if (!IS_ERR(page)) {
char *dst = kmap_atomic(page);
memcpy(dst, vaddr + i*PAGE_SIZE, PAGE_SIZE);
kunmap_atomic(dst);
drm_clflush_pages(&page, 1);
set_page_dirty(page);
mark_page_accessed(page);
page_cache_release(page);
}
}
intel_gtt_chipset_flush();
obj->phys_obj->cur_obj = NULL;
obj->phys_obj = NULL;
}
int
i915_gem_attach_phys_object(struct drm_device *dev,
struct drm_i915_gem_object *obj,
int id,
int align)
{
struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
drm_i915_private_t *dev_priv = dev->dev_private;
int ret = 0;
int page_count;
int i;
if (id > I915_MAX_PHYS_OBJECT)
return -EINVAL;
if (obj->phys_obj) {
if (obj->phys_obj->id == id)
return 0;
i915_gem_detach_phys_object(dev, obj);
}
/* create a new object */
if (!dev_priv->mm.phys_objs[id - 1]) {
ret = i915_gem_init_phys_object(dev, id,
obj->base.size, align);
if (ret) {
DRM_ERROR("failed to init phys object %d size: %zu\n",
id, obj->base.size);
return ret;
}
}
/* bind to the object */
obj->phys_obj = dev_priv->mm.phys_objs[id - 1];
obj->phys_obj->cur_obj = obj;
page_count = obj->base.size / PAGE_SIZE;
for (i = 0; i < page_count; i++) {
struct page *page;
char *dst, *src;
page = shmem_read_mapping_page(mapping, i);
if (IS_ERR(page))
return PTR_ERR(page);
src = kmap_atomic(page);
dst = obj->phys_obj->handle->vaddr + (i * PAGE_SIZE);
memcpy(dst, src, PAGE_SIZE);
mm: stack based kmap_atomic() Keep the current interface but ignore the KM_type and use a stack based approach. The advantage is that we get rid of crappy code like: #define __KM_PTE \ (in_nmi() ? KM_NMI_PTE : \ in_irq() ? KM_IRQ_PTE : \ KM_PTE0) and in general can stop worrying about what context we're in and what kmap slots might be appropriate for that. The downside is that FRV kmap_atomic() gets more expensive. For now we use a CPP trick suggested by Andrew: #define kmap_atomic(page, args...) __kmap_atomic(page) to avoid having to touch all kmap_atomic() users in a single patch. [ not compiled on: - mn10300: the arch doesn't actually build with highmem to begin with ] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c] Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 04:21:51 +07:00
kunmap_atomic(src);
mark_page_accessed(page);
page_cache_release(page);
}
return 0;
}
static int
i915_gem_phys_pwrite(struct drm_device *dev,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_pwrite *args,
struct drm_file *file_priv)
{
void *vaddr = obj->phys_obj->handle->vaddr + args->offset;
char __user *user_data = (char __user *) (uintptr_t) args->data_ptr;
if (__copy_from_user_inatomic_nocache(vaddr, user_data, args->size)) {
unsigned long unwritten;
/* The physical object once assigned is fixed for the lifetime
* of the obj, so we can safely drop the lock and continue
* to access vaddr.
*/
mutex_unlock(&dev->struct_mutex);
unwritten = copy_from_user(vaddr, user_data, args->size);
mutex_lock(&dev->struct_mutex);
if (unwritten)
return -EFAULT;
}
intel_gtt_chipset_flush();
return 0;
}
void i915_gem_release(struct drm_device *dev, struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
/* Clean up our request list when the client is going away, so that
* later retire_requests won't dereference our soon-to-be-gone
* file_priv.
*/
spin_lock(&file_priv->mm.lock);
while (!list_empty(&file_priv->mm.request_list)) {
struct drm_i915_gem_request *request;
request = list_first_entry(&file_priv->mm.request_list,
struct drm_i915_gem_request,
client_list);
list_del(&request->client_list);
request->file_priv = NULL;
}
spin_unlock(&file_priv->mm.lock);
}
static int
i915_gpu_is_active(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int lists_empty;
lists_empty = list_empty(&dev_priv->mm.flushing_list) &&
list_empty(&dev_priv->mm.active_list);
return !lists_empty;
}
static int
i915_gem_inactive_shrink(struct shrinker *shrinker, struct shrink_control *sc)
{
struct drm_i915_private *dev_priv =
container_of(shrinker,
struct drm_i915_private,
mm.inactive_shrinker);
struct drm_device *dev = dev_priv->dev;
struct drm_i915_gem_object *obj, *next;
int nr_to_scan = sc->nr_to_scan;
int cnt;
if (!mutex_trylock(&dev->struct_mutex))
return 0;
/* "fast-path" to count number of available objects */
if (nr_to_scan == 0) {
cnt = 0;
list_for_each_entry(obj,
&dev_priv->mm.inactive_list,
mm_list)
cnt++;
mutex_unlock(&dev->struct_mutex);
return cnt / 100 * sysctl_vfs_cache_pressure;
}
rescan:
/* first scan for clean buffers */
i915_gem_retire_requests(dev);
list_for_each_entry_safe(obj, next,
&dev_priv->mm.inactive_list,
mm_list) {
if (i915_gem_object_is_purgeable(obj)) {
if (i915_gem_object_unbind(obj) == 0 &&
--nr_to_scan == 0)
break;
}
}
/* second pass, evict/count anything still on the inactive list */
cnt = 0;
list_for_each_entry_safe(obj, next,
&dev_priv->mm.inactive_list,
mm_list) {
if (nr_to_scan &&
i915_gem_object_unbind(obj) == 0)
nr_to_scan--;
else
cnt++;
}
if (nr_to_scan && i915_gpu_is_active(dev)) {
/*
* We are desperate for pages, so as a last resort, wait
* for the GPU to finish and discard whatever we can.
* This has a dramatic impact to reduce the number of
* OOM-killer events whilst running the GPU aggressively.
*/
if (i915_gpu_idle(dev, true) == 0)
goto rescan;
}
mutex_unlock(&dev->struct_mutex);
return cnt / 100 * sysctl_vfs_cache_pressure;
}