linux_dsm_epyc7002/drivers/gpu/drm/i915/intel_connector.c
Uma Shankar 2f146b78d5 drm/i915: Attach colorspace property and enable modeset
This patch attaches the colorspace connector property to the
hdmi connector. Based on colorspace change, modeset will be
triggered to switch to new colorspace.

Based on colorspace property value create an infoframe
with appropriate colorspace. This can be used to send an
infoframe packet with proper colorspace value set which
will help to enable wider color gamut like BT2020 on sink.

This patch attaches and enables HDMI colorspace, DP will be
taken care separately.

v2: Merged the changes of creating infoframe as well to this
patch as per Maarten's suggestion.

v3: Addressed review comments from Shashank. Separated HDMI
and DP colorspaces as suggested by Ville and Maarten.

v4: Addressed Chris and Ville's review comments, and created a
common colorspace property for DP and HDMI, filtered the list
based on the colorspaces supported by the respective protocol
standard. Handle the default case properly.

v5: Merged the DP handling along with platform colorspace
handling as per Shashank's comments.

v6: Reverted to old design of exposing all colorspaces to
userspace as per Ville's review comment

v7: Fixed a checkpatch complaint, Addressed  Maarten' review
comment, updated the RB from Maarten and Jani's ack.

v8: Moved colorspace AVI Infoframe programming to drm core and
removed from driver as per Ville's suggestion.

v9: Added a check to only allow RGB colorpsaces to be set in
infoframe though the colorspace property. Since there is no output
csc property to control planar formats and it will be added later.
Changes for RGB->YUV conversion inside driver without userspace
knowledge is still supported. This is as per Ville's suggestion.

v10: Fixed an error in if check.

v11: Dropped the check for planar vs RGB and allow all the colorspaces.
Onus will be on userspace to pick whatever pipe output it is able to
drive.

v12: Added Ville's RB.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1550596381-993-4-git-send-email-uma.shankar@intel.com
2019-02-19 18:51:43 +01:00

276 lines
7.4 KiB
C

/*
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
* Copyright (c) 2007, 2010 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#include <linux/slab.h>
#include <linux/i2c.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_edid.h>
#include "intel_drv.h"
#include "i915_drv.h"
int intel_connector_init(struct intel_connector *connector)
{
struct intel_digital_connector_state *conn_state;
/*
* Allocate enough memory to hold intel_digital_connector_state,
* This might be a few bytes too many, but for connectors that don't
* need it we'll free the state and allocate a smaller one on the first
* successful commit anyway.
*/
conn_state = kzalloc(sizeof(*conn_state), GFP_KERNEL);
if (!conn_state)
return -ENOMEM;
__drm_atomic_helper_connector_reset(&connector->base,
&conn_state->base);
return 0;
}
struct intel_connector *intel_connector_alloc(void)
{
struct intel_connector *connector;
connector = kzalloc(sizeof(*connector), GFP_KERNEL);
if (!connector)
return NULL;
if (intel_connector_init(connector) < 0) {
kfree(connector);
return NULL;
}
return connector;
}
/*
* Free the bits allocated by intel_connector_alloc.
* This should only be used after intel_connector_alloc has returned
* successfully, and before drm_connector_init returns successfully.
* Otherwise the destroy callbacks for the connector and the state should
* take care of proper cleanup/free (see intel_connector_destroy).
*/
void intel_connector_free(struct intel_connector *connector)
{
kfree(to_intel_digital_connector_state(connector->base.state));
kfree(connector);
}
/*
* Connector type independent destroy hook for drm_connector_funcs.
*/
void intel_connector_destroy(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
kfree(intel_connector->detect_edid);
if (!IS_ERR_OR_NULL(intel_connector->edid))
kfree(intel_connector->edid);
intel_panel_fini(&intel_connector->panel);
drm_connector_cleanup(connector);
if (intel_connector->port)
drm_dp_mst_put_port_malloc(intel_connector->port);
kfree(connector);
}
int intel_connector_register(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
int ret;
ret = intel_backlight_device_register(intel_connector);
if (ret)
goto err;
if (i915_inject_load_failure()) {
ret = -EFAULT;
goto err_backlight;
}
return 0;
err_backlight:
intel_backlight_device_unregister(intel_connector);
err:
return ret;
}
void intel_connector_unregister(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
intel_backlight_device_unregister(intel_connector);
}
void intel_connector_attach_encoder(struct intel_connector *connector,
struct intel_encoder *encoder)
{
connector->encoder = encoder;
drm_connector_attach_encoder(&connector->base, &encoder->base);
}
/*
* Simple connector->get_hw_state implementation for encoders that support only
* one connector and no cloning and hence the encoder state determines the state
* of the connector.
*/
bool intel_connector_get_hw_state(struct intel_connector *connector)
{
enum pipe pipe = 0;
struct intel_encoder *encoder = connector->encoder;
return encoder->get_hw_state(encoder, &pipe);
}
enum pipe intel_connector_get_pipe(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
if (!connector->base.state->crtc)
return INVALID_PIPE;
return to_intel_crtc(connector->base.state->crtc)->pipe;
}
/**
* intel_connector_update_modes - update connector from edid
* @connector: DRM connector device to use
* @edid: previously read EDID information
*/
int intel_connector_update_modes(struct drm_connector *connector,
struct edid *edid)
{
int ret;
drm_connector_update_edid_property(connector, edid);
ret = drm_add_edid_modes(connector, edid);
return ret;
}
/**
* intel_ddc_get_modes - get modelist from monitor
* @connector: DRM connector device to use
* @adapter: i2c adapter
*
* Fetch the EDID information from @connector using the DDC bus.
*/
int intel_ddc_get_modes(struct drm_connector *connector,
struct i2c_adapter *adapter)
{
struct edid *edid;
int ret;
edid = drm_get_edid(connector, adapter);
if (!edid)
return 0;
ret = intel_connector_update_modes(connector, edid);
kfree(edid);
return ret;
}
static const struct drm_prop_enum_list force_audio_names[] = {
{ HDMI_AUDIO_OFF_DVI, "force-dvi" },
{ HDMI_AUDIO_OFF, "off" },
{ HDMI_AUDIO_AUTO, "auto" },
{ HDMI_AUDIO_ON, "on" },
};
void
intel_attach_force_audio_property(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_property *prop;
prop = dev_priv->force_audio_property;
if (prop == NULL) {
prop = drm_property_create_enum(dev, 0,
"audio",
force_audio_names,
ARRAY_SIZE(force_audio_names));
if (prop == NULL)
return;
dev_priv->force_audio_property = prop;
}
drm_object_attach_property(&connector->base, prop, 0);
}
static const struct drm_prop_enum_list broadcast_rgb_names[] = {
{ INTEL_BROADCAST_RGB_AUTO, "Automatic" },
{ INTEL_BROADCAST_RGB_FULL, "Full" },
{ INTEL_BROADCAST_RGB_LIMITED, "Limited 16:235" },
};
void
intel_attach_broadcast_rgb_property(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_property *prop;
prop = dev_priv->broadcast_rgb_property;
if (prop == NULL) {
prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM,
"Broadcast RGB",
broadcast_rgb_names,
ARRAY_SIZE(broadcast_rgb_names));
if (prop == NULL)
return;
dev_priv->broadcast_rgb_property = prop;
}
drm_object_attach_property(&connector->base, prop, 0);
}
void
intel_attach_aspect_ratio_property(struct drm_connector *connector)
{
if (!drm_mode_create_aspect_ratio_property(connector->dev))
drm_object_attach_property(&connector->base,
connector->dev->mode_config.aspect_ratio_property,
DRM_MODE_PICTURE_ASPECT_NONE);
}
void
intel_attach_colorspace_property(struct drm_connector *connector)
{
if (!drm_mode_create_colorspace_property(connector))
drm_object_attach_property(&connector->base,
connector->colorspace_property, 0);
}