linux_dsm_epyc7002/drivers/thunderbolt/tb.c
Mika Westerberg f67cf49117 thunderbolt: Add support for Internal Connection Manager (ICM)
Starting from Intel Falcon Ridge the internal connection manager running
on the Thunderbolt host controller has been supporting 4 security
levels. One reason for this is to prevent DMA attacks and only allow
connecting devices the user trusts.

The internal connection manager (ICM) is the preferred way of connecting
Thunderbolt devices over software only implementation typically used on
Macs. The driver communicates with ICM using special Thunderbolt ring 0
(control channel) messages. In order to handle these messages we add
support for the ICM messages to the control channel.

The security levels are as follows:

  none - No security, all tunnels are created automatically
  user - User needs to approve the device before tunnels are created
  secure - User need to approve the device before tunnels are created.
	   The device is sent a challenge on future connects to be able
	   to verify it is actually the approved device.
  dponly - Only Display Port and USB tunnels can be created and those
           are created automatically.

The security levels are typically configurable from the system BIOS and
by default it is set to "user" on many systems.

In this patch each Thunderbolt device will have either one or two new
sysfs attributes: authorized and key. The latter appears for devices
that support secure connect.

In order to identify the device the user can read identication
information, including UUID and name of the device from sysfs and based
on that make a decision to authorize the device. The device is
authorized by simply writing 1 to the "authorized" sysfs attribute. This
is following the USB bus device authorization mechanism. The secure
connect requires an additional challenge step (writing 2 to the
"authorized" attribute) in future connects when the key has already been
stored to the NVM of the device.

Non-ICM systems (before Alpine Ridge) continue to use the existing
functionality and the security level is set to none. For systems with
Alpine Ridge, even on Apple hardware, we will use ICM.

This code is based on the work done by Amir Levy and Michael Jamet.

Signed-off-by: Michael Jamet <michael.jamet@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:42:43 +02:00

464 lines
11 KiB
C

/*
* Thunderbolt Cactus Ridge driver - bus logic (NHI independent)
*
* Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
*/
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/dmi.h>
#include "tb.h"
#include "tb_regs.h"
#include "tunnel_pci.h"
/**
* struct tb_cm - Simple Thunderbolt connection manager
* @tunnel_list: List of active tunnels
* @hotplug_active: tb_handle_hotplug will stop progressing plug
* events and exit if this is not set (it needs to
* acquire the lock one more time). Used to drain wq
* after cfg has been paused.
*/
struct tb_cm {
struct list_head tunnel_list;
bool hotplug_active;
};
/* enumeration & hot plug handling */
static void tb_scan_port(struct tb_port *port);
/**
* tb_scan_switch() - scan for and initialize downstream switches
*/
static void tb_scan_switch(struct tb_switch *sw)
{
int i;
for (i = 1; i <= sw->config.max_port_number; i++)
tb_scan_port(&sw->ports[i]);
}
/**
* tb_scan_port() - check for and initialize switches below port
*/
static void tb_scan_port(struct tb_port *port)
{
struct tb_switch *sw;
if (tb_is_upstream_port(port))
return;
if (port->config.type != TB_TYPE_PORT)
return;
if (port->dual_link_port && port->link_nr)
return; /*
* Downstream switch is reachable through two ports.
* Only scan on the primary port (link_nr == 0).
*/
if (tb_wait_for_port(port, false) <= 0)
return;
if (port->remote) {
tb_port_WARN(port, "port already has a remote!\n");
return;
}
sw = tb_switch_alloc(port->sw->tb, &port->sw->dev,
tb_downstream_route(port));
if (!sw)
return;
if (tb_switch_configure(sw)) {
tb_switch_put(sw);
return;
}
sw->authorized = true;
if (tb_switch_add(sw)) {
tb_switch_put(sw);
return;
}
port->remote = tb_upstream_port(sw);
tb_upstream_port(sw)->remote = port;
tb_scan_switch(sw);
}
/**
* tb_free_invalid_tunnels() - destroy tunnels of devices that have gone away
*/
static void tb_free_invalid_tunnels(struct tb *tb)
{
struct tb_cm *tcm = tb_priv(tb);
struct tb_pci_tunnel *tunnel;
struct tb_pci_tunnel *n;
list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) {
if (tb_pci_is_invalid(tunnel)) {
tb_pci_deactivate(tunnel);
list_del(&tunnel->list);
tb_pci_free(tunnel);
}
}
}
/**
* tb_free_unplugged_children() - traverse hierarchy and free unplugged switches
*/
static void tb_free_unplugged_children(struct tb_switch *sw)
{
int i;
for (i = 1; i <= sw->config.max_port_number; i++) {
struct tb_port *port = &sw->ports[i];
if (tb_is_upstream_port(port))
continue;
if (!port->remote)
continue;
if (port->remote->sw->is_unplugged) {
tb_switch_remove(port->remote->sw);
port->remote = NULL;
} else {
tb_free_unplugged_children(port->remote->sw);
}
}
}
/**
* find_pci_up_port() - return the first PCIe up port on @sw or NULL
*/
static struct tb_port *tb_find_pci_up_port(struct tb_switch *sw)
{
int i;
for (i = 1; i <= sw->config.max_port_number; i++)
if (sw->ports[i].config.type == TB_TYPE_PCIE_UP)
return &sw->ports[i];
return NULL;
}
/**
* find_unused_down_port() - return the first inactive PCIe down port on @sw
*/
static struct tb_port *tb_find_unused_down_port(struct tb_switch *sw)
{
int i;
int cap;
int res;
int data;
for (i = 1; i <= sw->config.max_port_number; i++) {
if (tb_is_upstream_port(&sw->ports[i]))
continue;
if (sw->ports[i].config.type != TB_TYPE_PCIE_DOWN)
continue;
cap = tb_port_find_cap(&sw->ports[i], TB_PORT_CAP_ADAP);
if (cap < 0)
continue;
res = tb_port_read(&sw->ports[i], &data, TB_CFG_PORT, cap, 1);
if (res < 0)
continue;
if (data & 0x80000000)
continue;
return &sw->ports[i];
}
return NULL;
}
/**
* tb_activate_pcie_devices() - scan for and activate PCIe devices
*
* This method is somewhat ad hoc. For now it only supports one device
* per port and only devices at depth 1.
*/
static void tb_activate_pcie_devices(struct tb *tb)
{
int i;
int cap;
u32 data;
struct tb_switch *sw;
struct tb_port *up_port;
struct tb_port *down_port;
struct tb_pci_tunnel *tunnel;
struct tb_cm *tcm = tb_priv(tb);
/* scan for pcie devices at depth 1*/
for (i = 1; i <= tb->root_switch->config.max_port_number; i++) {
if (tb_is_upstream_port(&tb->root_switch->ports[i]))
continue;
if (tb->root_switch->ports[i].config.type != TB_TYPE_PORT)
continue;
if (!tb->root_switch->ports[i].remote)
continue;
sw = tb->root_switch->ports[i].remote->sw;
up_port = tb_find_pci_up_port(sw);
if (!up_port) {
tb_sw_info(sw, "no PCIe devices found, aborting\n");
continue;
}
/* check whether port is already activated */
cap = tb_port_find_cap(up_port, TB_PORT_CAP_ADAP);
if (cap < 0)
continue;
if (tb_port_read(up_port, &data, TB_CFG_PORT, cap, 1))
continue;
if (data & 0x80000000) {
tb_port_info(up_port,
"PCIe port already activated, aborting\n");
continue;
}
down_port = tb_find_unused_down_port(tb->root_switch);
if (!down_port) {
tb_port_info(up_port,
"All PCIe down ports are occupied, aborting\n");
continue;
}
tunnel = tb_pci_alloc(tb, up_port, down_port);
if (!tunnel) {
tb_port_info(up_port,
"PCIe tunnel allocation failed, aborting\n");
continue;
}
if (tb_pci_activate(tunnel)) {
tb_port_info(up_port,
"PCIe tunnel activation failed, aborting\n");
tb_pci_free(tunnel);
}
list_add(&tunnel->list, &tcm->tunnel_list);
}
}
/* hotplug handling */
struct tb_hotplug_event {
struct work_struct work;
struct tb *tb;
u64 route;
u8 port;
bool unplug;
};
/**
* tb_handle_hotplug() - handle hotplug event
*
* Executes on tb->wq.
*/
static void tb_handle_hotplug(struct work_struct *work)
{
struct tb_hotplug_event *ev = container_of(work, typeof(*ev), work);
struct tb *tb = ev->tb;
struct tb_cm *tcm = tb_priv(tb);
struct tb_switch *sw;
struct tb_port *port;
mutex_lock(&tb->lock);
if (!tcm->hotplug_active)
goto out; /* during init, suspend or shutdown */
sw = get_switch_at_route(tb->root_switch, ev->route);
if (!sw) {
tb_warn(tb,
"hotplug event from non existent switch %llx:%x (unplug: %d)\n",
ev->route, ev->port, ev->unplug);
goto out;
}
if (ev->port > sw->config.max_port_number) {
tb_warn(tb,
"hotplug event from non existent port %llx:%x (unplug: %d)\n",
ev->route, ev->port, ev->unplug);
goto out;
}
port = &sw->ports[ev->port];
if (tb_is_upstream_port(port)) {
tb_warn(tb,
"hotplug event for upstream port %llx:%x (unplug: %d)\n",
ev->route, ev->port, ev->unplug);
goto out;
}
if (ev->unplug) {
if (port->remote) {
tb_port_info(port, "unplugged\n");
tb_sw_set_unplugged(port->remote->sw);
tb_free_invalid_tunnels(tb);
tb_switch_remove(port->remote->sw);
port->remote = NULL;
} else {
tb_port_info(port,
"got unplug event for disconnected port, ignoring\n");
}
} else if (port->remote) {
tb_port_info(port,
"got plug event for connected port, ignoring\n");
} else {
tb_port_info(port, "hotplug: scanning\n");
tb_scan_port(port);
if (!port->remote) {
tb_port_info(port, "hotplug: no switch found\n");
} else if (port->remote->sw->config.depth > 1) {
tb_sw_warn(port->remote->sw,
"hotplug: chaining not supported\n");
} else {
tb_sw_info(port->remote->sw,
"hotplug: activating pcie devices\n");
tb_activate_pcie_devices(tb);
}
}
out:
mutex_unlock(&tb->lock);
kfree(ev);
}
/**
* tb_schedule_hotplug_handler() - callback function for the control channel
*
* Delegates to tb_handle_hotplug.
*/
static void tb_handle_event(struct tb *tb, enum tb_cfg_pkg_type type,
const void *buf, size_t size)
{
const struct cfg_event_pkg *pkg = buf;
struct tb_hotplug_event *ev;
u64 route;
if (type != TB_CFG_PKG_EVENT) {
tb_warn(tb, "unexpected event %#x, ignoring\n", type);
return;
}
route = tb_cfg_get_route(&pkg->header);
if (tb_cfg_error(tb->ctl, route, pkg->port,
TB_CFG_ERROR_ACK_PLUG_EVENT)) {
tb_warn(tb, "could not ack plug event on %llx:%x\n", route,
pkg->port);
}
ev = kmalloc(sizeof(*ev), GFP_KERNEL);
if (!ev)
return;
INIT_WORK(&ev->work, tb_handle_hotplug);
ev->tb = tb;
ev->route = route;
ev->port = pkg->port;
ev->unplug = pkg->unplug;
queue_work(tb->wq, &ev->work);
}
static void tb_stop(struct tb *tb)
{
struct tb_cm *tcm = tb_priv(tb);
struct tb_pci_tunnel *tunnel;
struct tb_pci_tunnel *n;
/* tunnels are only present after everything has been initialized */
list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) {
tb_pci_deactivate(tunnel);
tb_pci_free(tunnel);
}
tb_switch_remove(tb->root_switch);
tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */
}
static int tb_start(struct tb *tb)
{
struct tb_cm *tcm = tb_priv(tb);
int ret;
tb->root_switch = tb_switch_alloc(tb, &tb->dev, 0);
if (!tb->root_switch)
return -ENOMEM;
ret = tb_switch_configure(tb->root_switch);
if (ret) {
tb_switch_put(tb->root_switch);
return ret;
}
/* Announce the switch to the world */
ret = tb_switch_add(tb->root_switch);
if (ret) {
tb_switch_put(tb->root_switch);
return ret;
}
/* Full scan to discover devices added before the driver was loaded. */
tb_scan_switch(tb->root_switch);
tb_activate_pcie_devices(tb);
/* Allow tb_handle_hotplug to progress events */
tcm->hotplug_active = true;
return 0;
}
static int tb_suspend_noirq(struct tb *tb)
{
struct tb_cm *tcm = tb_priv(tb);
tb_info(tb, "suspending...\n");
tb_switch_suspend(tb->root_switch);
tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */
tb_info(tb, "suspend finished\n");
return 0;
}
static int tb_resume_noirq(struct tb *tb)
{
struct tb_cm *tcm = tb_priv(tb);
struct tb_pci_tunnel *tunnel, *n;
tb_info(tb, "resuming...\n");
/* remove any pci devices the firmware might have setup */
tb_switch_reset(tb, 0);
tb_switch_resume(tb->root_switch);
tb_free_invalid_tunnels(tb);
tb_free_unplugged_children(tb->root_switch);
list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list)
tb_pci_restart(tunnel);
if (!list_empty(&tcm->tunnel_list)) {
/*
* the pcie links need some time to get going.
* 100ms works for me...
*/
tb_info(tb, "tunnels restarted, sleeping for 100ms\n");
msleep(100);
}
/* Allow tb_handle_hotplug to progress events */
tcm->hotplug_active = true;
tb_info(tb, "resume finished\n");
return 0;
}
static const struct tb_cm_ops tb_cm_ops = {
.start = tb_start,
.stop = tb_stop,
.suspend_noirq = tb_suspend_noirq,
.resume_noirq = tb_resume_noirq,
.handle_event = tb_handle_event,
};
struct tb *tb_probe(struct tb_nhi *nhi)
{
struct tb_cm *tcm;
struct tb *tb;
if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc."))
return NULL;
tb = tb_domain_alloc(nhi, sizeof(*tcm));
if (!tb)
return NULL;
tb->security_level = TB_SECURITY_NONE;
tb->cm_ops = &tb_cm_ops;
tcm = tb_priv(tb);
INIT_LIST_HEAD(&tcm->tunnel_list);
return tb;
}